8bd26e3a7e
The __cpuinit type of throwaway sections might have made sense
some time ago when RAM was more constrained, but now the savings
do not offset the cost and complications. For example, the fix in
commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time")
is a good example of the nasty type of bugs that can be created
with improper use of the various __init prefixes.
After a discussion on LKML[1] it was decided that cpuinit should go
the way of devinit and be phased out. Once all the users are gone,
we can then finally remove the macros themselves from linux/init.h.
Note that some harmless section mismatch warnings may result, since
notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c)
and are flagged as __cpuinit -- so if we remove the __cpuinit from
the arch specific callers, we will also get section mismatch warnings.
As an intermediate step, we intend to turn the linux/init.h cpuinit
related content into no-ops as early as possible, since that will get
rid of these warnings. In any case, they are temporary and harmless.
This removes all the ARM uses of the __cpuinit macros from C code,
and all __CPUINIT from assembly code. It also had two ".previous"
section statements that were paired off against __CPUINIT
(aka .section ".cpuinit.text") that also get removed here.
[1] https://lkml.org/lkml/2013/5/20/589
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
219 lines
5.9 KiB
ArmAsm
219 lines
5.9 KiB
ArmAsm
/*
|
|
* linux/arch/arm/mm/proc-arm720.S: MMU functions for ARM720
|
|
*
|
|
* Copyright (C) 2000 Steve Hill (sjhill@cotw.com)
|
|
* Rob Scott (rscott@mtrob.fdns.net)
|
|
* Copyright (C) 2000 ARM Limited, Deep Blue Solutions Ltd.
|
|
* hacked for non-paged-MM by Hyok S. Choi, 2004.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
*
|
|
*
|
|
* These are the low level assembler for performing cache and TLB
|
|
* functions on the ARM720T. The ARM720T has a writethrough IDC
|
|
* cache, so we don't need to clean it.
|
|
*
|
|
* Changelog:
|
|
* 05-09-2000 SJH Created by moving 720 specific functions
|
|
* out of 'proc-arm6,7.S' per RMK discussion
|
|
* 07-25-2000 SJH Added idle function.
|
|
* 08-25-2000 DBS Updated for integration of ARM Ltd version.
|
|
* 04-20-2004 HSC modified for non-paged memory management mode.
|
|
*/
|
|
#include <linux/linkage.h>
|
|
#include <linux/init.h>
|
|
#include <asm/assembler.h>
|
|
#include <asm/asm-offsets.h>
|
|
#include <asm/hwcap.h>
|
|
#include <asm/pgtable-hwdef.h>
|
|
#include <asm/pgtable.h>
|
|
#include <asm/ptrace.h>
|
|
|
|
#include "proc-macros.S"
|
|
|
|
/*
|
|
* Function: arm720_proc_init (void)
|
|
* : arm720_proc_fin (void)
|
|
*
|
|
* Notes : This processor does not require these
|
|
*/
|
|
ENTRY(cpu_arm720_dcache_clean_area)
|
|
ENTRY(cpu_arm720_proc_init)
|
|
mov pc, lr
|
|
|
|
ENTRY(cpu_arm720_proc_fin)
|
|
mrc p15, 0, r0, c1, c0, 0
|
|
bic r0, r0, #0x1000 @ ...i............
|
|
bic r0, r0, #0x000e @ ............wca.
|
|
mcr p15, 0, r0, c1, c0, 0 @ disable caches
|
|
mov pc, lr
|
|
|
|
/*
|
|
* Function: arm720_proc_do_idle(void)
|
|
* Params : r0 = unused
|
|
* Purpose : put the processor in proper idle mode
|
|
*/
|
|
ENTRY(cpu_arm720_do_idle)
|
|
mov pc, lr
|
|
|
|
/*
|
|
* Function: arm720_switch_mm(unsigned long pgd_phys)
|
|
* Params : pgd_phys Physical address of page table
|
|
* Purpose : Perform a task switch, saving the old process' state and restoring
|
|
* the new.
|
|
*/
|
|
ENTRY(cpu_arm720_switch_mm)
|
|
#ifdef CONFIG_MMU
|
|
mov r1, #0
|
|
mcr p15, 0, r1, c7, c7, 0 @ invalidate cache
|
|
mcr p15, 0, r0, c2, c0, 0 @ update page table ptr
|
|
mcr p15, 0, r1, c8, c7, 0 @ flush TLB (v4)
|
|
#endif
|
|
mov pc, lr
|
|
|
|
/*
|
|
* Function: arm720_set_pte_ext(pte_t *ptep, pte_t pte, unsigned int ext)
|
|
* Params : r0 = Address to set
|
|
* : r1 = value to set
|
|
* Purpose : Set a PTE and flush it out of any WB cache
|
|
*/
|
|
.align 5
|
|
ENTRY(cpu_arm720_set_pte_ext)
|
|
#ifdef CONFIG_MMU
|
|
armv3_set_pte_ext wc_disable=0
|
|
#endif
|
|
mov pc, lr
|
|
|
|
/*
|
|
* Function: arm720_reset
|
|
* Params : r0 = address to jump to
|
|
* Notes : This sets up everything for a reset
|
|
*/
|
|
.pushsection .idmap.text, "ax"
|
|
ENTRY(cpu_arm720_reset)
|
|
mov ip, #0
|
|
mcr p15, 0, ip, c7, c7, 0 @ invalidate cache
|
|
#ifdef CONFIG_MMU
|
|
mcr p15, 0, ip, c8, c7, 0 @ flush TLB (v4)
|
|
#endif
|
|
mrc p15, 0, ip, c1, c0, 0 @ get ctrl register
|
|
bic ip, ip, #0x000f @ ............wcam
|
|
bic ip, ip, #0x2100 @ ..v....s........
|
|
mcr p15, 0, ip, c1, c0, 0 @ ctrl register
|
|
mov pc, r0
|
|
ENDPROC(cpu_arm720_reset)
|
|
.popsection
|
|
|
|
.type __arm710_setup, #function
|
|
__arm710_setup:
|
|
mov r0, #0
|
|
mcr p15, 0, r0, c7, c7, 0 @ invalidate caches
|
|
#ifdef CONFIG_MMU
|
|
mcr p15, 0, r0, c8, c7, 0 @ flush TLB (v4)
|
|
#endif
|
|
mrc p15, 0, r0, c1, c0 @ get control register
|
|
ldr r5, arm710_cr1_clear
|
|
bic r0, r0, r5
|
|
ldr r5, arm710_cr1_set
|
|
orr r0, r0, r5
|
|
mov pc, lr @ __ret (head.S)
|
|
.size __arm710_setup, . - __arm710_setup
|
|
|
|
/*
|
|
* R
|
|
* .RVI ZFRS BLDP WCAM
|
|
* .... 0001 ..11 1101
|
|
*
|
|
*/
|
|
.type arm710_cr1_clear, #object
|
|
.type arm710_cr1_set, #object
|
|
arm710_cr1_clear:
|
|
.word 0x0f3f
|
|
arm710_cr1_set:
|
|
.word 0x013d
|
|
|
|
.type __arm720_setup, #function
|
|
__arm720_setup:
|
|
mov r0, #0
|
|
mcr p15, 0, r0, c7, c7, 0 @ invalidate caches
|
|
#ifdef CONFIG_MMU
|
|
mcr p15, 0, r0, c8, c7, 0 @ flush TLB (v4)
|
|
#endif
|
|
adr r5, arm720_crval
|
|
ldmia r5, {r5, r6}
|
|
mrc p15, 0, r0, c1, c0 @ get control register
|
|
bic r0, r0, r5
|
|
orr r0, r0, r6
|
|
mov pc, lr @ __ret (head.S)
|
|
.size __arm720_setup, . - __arm720_setup
|
|
|
|
/*
|
|
* R
|
|
* .RVI ZFRS BLDP WCAM
|
|
* ..1. 1001 ..11 1101
|
|
*
|
|
*/
|
|
.type arm720_crval, #object
|
|
arm720_crval:
|
|
crval clear=0x00002f3f, mmuset=0x0000213d, ucset=0x00000130
|
|
|
|
__INITDATA
|
|
@ define struct processor (see <asm/proc-fns.h> and proc-macros.S)
|
|
define_processor_functions arm720, dabort=v4t_late_abort, pabort=legacy_pabort
|
|
|
|
.section ".rodata"
|
|
|
|
string cpu_arch_name, "armv4t"
|
|
string cpu_elf_name, "v4"
|
|
string cpu_arm710_name, "ARM710T"
|
|
string cpu_arm720_name, "ARM720T"
|
|
|
|
.align
|
|
|
|
/*
|
|
* See <asm/procinfo.h> for a definition of this structure.
|
|
*/
|
|
|
|
.section ".proc.info.init", #alloc, #execinstr
|
|
|
|
.macro arm720_proc_info name:req, cpu_val:req, cpu_mask:req, cpu_name:req, cpu_flush:req
|
|
.type __\name\()_proc_info,#object
|
|
__\name\()_proc_info:
|
|
.long \cpu_val
|
|
.long \cpu_mask
|
|
.long PMD_TYPE_SECT | \
|
|
PMD_SECT_BUFFERABLE | \
|
|
PMD_SECT_CACHEABLE | \
|
|
PMD_BIT4 | \
|
|
PMD_SECT_AP_WRITE | \
|
|
PMD_SECT_AP_READ
|
|
.long PMD_TYPE_SECT | \
|
|
PMD_BIT4 | \
|
|
PMD_SECT_AP_WRITE | \
|
|
PMD_SECT_AP_READ
|
|
b \cpu_flush @ cpu_flush
|
|
.long cpu_arch_name @ arch_name
|
|
.long cpu_elf_name @ elf_name
|
|
.long HWCAP_SWP | HWCAP_HALF | HWCAP_THUMB @ elf_hwcap
|
|
.long \cpu_name
|
|
.long arm720_processor_functions
|
|
.long v4_tlb_fns
|
|
.long v4wt_user_fns
|
|
.long v4_cache_fns
|
|
.size __\name\()_proc_info, . - __\name\()_proc_info
|
|
.endm
|
|
|
|
arm720_proc_info arm710, 0x41807100, 0xffffff00, cpu_arm710_name, __arm710_setup
|
|
arm720_proc_info arm720, 0x41807200, 0xffffff00, cpu_arm720_name, __arm720_setup
|