07ffee59a7
Create separate functions to deal with instruction and data cache flushing. This way we can optimize them for the vairous cache types and arrangements used across the ColdFire family. For example the unified caches in the version 3 cores means we don't need to flush the instruction cache. For the version 2 cores that do not do data cacheing (or where we choose instruction cache only) we don't need to do any data flushing. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
94 lines
3.5 KiB
C
94 lines
3.5 KiB
C
/****************************************************************************/
|
|
|
|
/*
|
|
* m52xxacr.h -- ColdFire version 2 core cache support
|
|
*
|
|
* (C) Copyright 2010, Greg Ungerer <gerg@snapgear.com>
|
|
*/
|
|
|
|
/****************************************************************************/
|
|
#ifndef m52xxacr_h
|
|
#define m52xxacr_h
|
|
/****************************************************************************/
|
|
|
|
/*
|
|
* All varients of the ColdFire using version 2 cores have a similar
|
|
* cache setup. Although not absolutely identical the cache register
|
|
* definitions are compatible for all of them. Mostly they support a
|
|
* configurable cache memory that can be instruction only, data only,
|
|
* or split instruction and data. The exception is the very old version 2
|
|
* core based parts, like the 5206(e), 5249 and 5272, which are instruction
|
|
* cache only. Cache size varies from 2k up to 16k.
|
|
*/
|
|
|
|
/*
|
|
* Define the Cache Control register flags.
|
|
*/
|
|
#define CACR_CENB 0x80000000 /* Enable cache */
|
|
#define CACR_CDPI 0x10000000 /* Disable invalidation by CPUSHL */
|
|
#define CACR_CFRZ 0x08000000 /* Cache freeze mode */
|
|
#define CACR_CINV 0x01000000 /* Invalidate cache */
|
|
#define CACR_DISI 0x00800000 /* Disable instruction cache */
|
|
#define CACR_DISD 0x00400000 /* Disable data cache */
|
|
#define CACR_INVI 0x00200000 /* Invalidate instruction cache */
|
|
#define CACR_INVD 0x00100000 /* Invalidate data cache */
|
|
#define CACR_CEIB 0x00000400 /* Non-cachable instruction burst */
|
|
#define CACR_DCM 0x00000200 /* Default cache mode */
|
|
#define CACR_DBWE 0x00000100 /* Buffered write enable */
|
|
#define CACR_DWP 0x00000020 /* Write protection */
|
|
#define CACR_EUSP 0x00000010 /* Enable separate user a7 */
|
|
|
|
/*
|
|
* Define the Access Control register flags.
|
|
*/
|
|
#define ACR_BASE_POS 24 /* Address Base (upper 8 bits) */
|
|
#define ACR_MASK_POS 16 /* Address Mask (next 8 bits) */
|
|
#define ACR_ENABLE 0x00008000 /* Enable this ACR */
|
|
#define ACR_USER 0x00000000 /* Allow only user accesses */
|
|
#define ACR_SUPER 0x00002000 /* Allow supervisor access only */
|
|
#define ACR_ANY 0x00004000 /* Allow any access type */
|
|
#define ACR_CENB 0x00000000 /* Caching of region enabled */
|
|
#define ACR_CDIS 0x00000040 /* Caching of region disabled */
|
|
#define ACR_BWE 0x00000020 /* Write buffer enabled */
|
|
#define ACR_WPROTECT 0x00000004 /* Write protect region */
|
|
|
|
/*
|
|
* Set the cache controller settings we will use. On the cores that support
|
|
* a split cache configuration we allow all the combinations at Kconfig
|
|
* time. For those cores that only have an instruction cache we just set
|
|
* that as on.
|
|
*/
|
|
#if defined(CONFIG_CACHE_I)
|
|
#define CACHE_TYPE (CACR_DISD + CACR_EUSP)
|
|
#define CACHE_INVTYPEI 0
|
|
#elif defined(CONFIG_CACHE_D)
|
|
#define CACHE_TYPE (CACR_DISI + CACR_EUSP)
|
|
#define CACHE_INVTYPED 0
|
|
#elif defined(CONFIG_CACHE_BOTH)
|
|
#define CACHE_TYPE CACR_EUSP
|
|
#define CACHE_INVTYPEI CACR_INVI
|
|
#define CACHE_INVTYPED CACR_INVD
|
|
#else
|
|
/* This is the instruction cache only devices (no split cache, no eusp) */
|
|
#define CACHE_TYPE 0
|
|
#define CACHE_INVTYPEI 0
|
|
#endif
|
|
|
|
#define CACHE_INIT (CACR_CINV + CACHE_TYPE)
|
|
#define CACHE_MODE (CACR_CENB + CACHE_TYPE + CACR_DCM)
|
|
|
|
#define CACHE_INVALIDATE (CACHE_MODE + CACR_CINV)
|
|
#if defined(CACHE_INVTYPEI)
|
|
#define CACHE_INVALIDATEI (CACHE_MODE + CACR_CINV + CACHE_INVTYPEI)
|
|
#endif
|
|
#if defined(CACHE_INVTYPED)
|
|
#define CACHE_INVALIDATED (CACHE_MODE + CACR_CINV + CACHE_INVTYPED)
|
|
#endif
|
|
|
|
#define ACR0_MODE ((CONFIG_RAMBASE & 0xff000000) + \
|
|
(0x000f0000) + \
|
|
(ACR_ENABLE + ACR_ANY + ACR_CENB + ACR_BWE))
|
|
#define ACR1_MODE 0
|
|
|
|
/****************************************************************************/
|
|
#endif /* m52xxsim_h */
|