 392debf116
			
		
	
	
	392debf116
	
	
	
		
			
			Don't use DEFINE_PCI_DEVICE_TABLE macro, because this macro is not preferred. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
		
			
				
	
	
		
			704 lines
		
	
	
	
		
			19 KiB
			
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			704 lines
		
	
	
	
		
			19 KiB
			
		
	
	
	
		
			C
		
	
	
	
	
	
| /*
 | |
|     Copyright (c) 1998 - 2002 Frodo Looijaard <frodol@dds.nl> and
 | |
|     Philip Edelbrock <phil@netroedge.com>
 | |
| 
 | |
|     This program is free software; you can redistribute it and/or modify
 | |
|     it under the terms of the GNU General Public License as published by
 | |
|     the Free Software Foundation; either version 2 of the License, or
 | |
|     (at your option) any later version.
 | |
| 
 | |
|     This program is distributed in the hope that it will be useful,
 | |
|     but WITHOUT ANY WARRANTY; without even the implied warranty of
 | |
|     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 | |
|     GNU General Public License for more details.
 | |
| 
 | |
|     You should have received a copy of the GNU General Public License
 | |
|     along with this program; if not, write to the Free Software
 | |
|     Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 | |
| */
 | |
| 
 | |
| /*
 | |
|    Supports:
 | |
| 	Intel PIIX4, 440MX
 | |
| 	Serverworks OSB4, CSB5, CSB6, HT-1000, HT-1100
 | |
| 	ATI IXP200, IXP300, IXP400, SB600, SB700/SP5100, SB800
 | |
| 	AMD Hudson-2, ML, CZ
 | |
| 	SMSC Victory66
 | |
| 
 | |
|    Note: we assume there can only be one device, with one or more
 | |
|    SMBus interfaces.
 | |
| */
 | |
| 
 | |
| #include <linux/module.h>
 | |
| #include <linux/moduleparam.h>
 | |
| #include <linux/pci.h>
 | |
| #include <linux/kernel.h>
 | |
| #include <linux/delay.h>
 | |
| #include <linux/stddef.h>
 | |
| #include <linux/ioport.h>
 | |
| #include <linux/i2c.h>
 | |
| #include <linux/slab.h>
 | |
| #include <linux/dmi.h>
 | |
| #include <linux/acpi.h>
 | |
| #include <linux/io.h>
 | |
| 
 | |
| 
 | |
| /* PIIX4 SMBus address offsets */
 | |
| #define SMBHSTSTS	(0 + piix4_smba)
 | |
| #define SMBHSLVSTS	(1 + piix4_smba)
 | |
| #define SMBHSTCNT	(2 + piix4_smba)
 | |
| #define SMBHSTCMD	(3 + piix4_smba)
 | |
| #define SMBHSTADD	(4 + piix4_smba)
 | |
| #define SMBHSTDAT0	(5 + piix4_smba)
 | |
| #define SMBHSTDAT1	(6 + piix4_smba)
 | |
| #define SMBBLKDAT	(7 + piix4_smba)
 | |
| #define SMBSLVCNT	(8 + piix4_smba)
 | |
| #define SMBSHDWCMD	(9 + piix4_smba)
 | |
| #define SMBSLVEVT	(0xA + piix4_smba)
 | |
| #define SMBSLVDAT	(0xC + piix4_smba)
 | |
| 
 | |
| /* count for request_region */
 | |
| #define SMBIOSIZE	8
 | |
| 
 | |
| /* PCI Address Constants */
 | |
| #define SMBBA		0x090
 | |
| #define SMBHSTCFG	0x0D2
 | |
| #define SMBSLVC		0x0D3
 | |
| #define SMBSHDW1	0x0D4
 | |
| #define SMBSHDW2	0x0D5
 | |
| #define SMBREV		0x0D6
 | |
| 
 | |
| /* Other settings */
 | |
| #define MAX_TIMEOUT	500
 | |
| #define  ENABLE_INT9	0
 | |
| 
 | |
| /* PIIX4 constants */
 | |
| #define PIIX4_QUICK		0x00
 | |
| #define PIIX4_BYTE		0x04
 | |
| #define PIIX4_BYTE_DATA		0x08
 | |
| #define PIIX4_WORD_DATA		0x0C
 | |
| #define PIIX4_BLOCK_DATA	0x14
 | |
| 
 | |
| /* insmod parameters */
 | |
| 
 | |
| /* If force is set to anything different from 0, we forcibly enable the
 | |
|    PIIX4. DANGEROUS! */
 | |
| static int force;
 | |
| module_param (force, int, 0);
 | |
| MODULE_PARM_DESC(force, "Forcibly enable the PIIX4. DANGEROUS!");
 | |
| 
 | |
| /* If force_addr is set to anything different from 0, we forcibly enable
 | |
|    the PIIX4 at the given address. VERY DANGEROUS! */
 | |
| static int force_addr;
 | |
| module_param (force_addr, int, 0);
 | |
| MODULE_PARM_DESC(force_addr,
 | |
| 		 "Forcibly enable the PIIX4 at the given address. "
 | |
| 		 "EXTREMELY DANGEROUS!");
 | |
| 
 | |
| static int srvrworks_csb5_delay;
 | |
| static struct pci_driver piix4_driver;
 | |
| 
 | |
| static const struct dmi_system_id piix4_dmi_blacklist[] = {
 | |
| 	{
 | |
| 		.ident = "Sapphire AM2RD790",
 | |
| 		.matches = {
 | |
| 			DMI_MATCH(DMI_BOARD_VENDOR, "SAPPHIRE Inc."),
 | |
| 			DMI_MATCH(DMI_BOARD_NAME, "PC-AM2RD790"),
 | |
| 		},
 | |
| 	},
 | |
| 	{
 | |
| 		.ident = "DFI Lanparty UT 790FX",
 | |
| 		.matches = {
 | |
| 			DMI_MATCH(DMI_BOARD_VENDOR, "DFI Inc."),
 | |
| 			DMI_MATCH(DMI_BOARD_NAME, "LP UT 790FX"),
 | |
| 		},
 | |
| 	},
 | |
| 	{ }
 | |
| };
 | |
| 
 | |
| /* The IBM entry is in a separate table because we only check it
 | |
|    on Intel-based systems */
 | |
| static const struct dmi_system_id piix4_dmi_ibm[] = {
 | |
| 	{
 | |
| 		.ident = "IBM",
 | |
| 		.matches = { DMI_MATCH(DMI_SYS_VENDOR, "IBM"), },
 | |
| 	},
 | |
| 	{ },
 | |
| };
 | |
| 
 | |
| struct i2c_piix4_adapdata {
 | |
| 	unsigned short smba;
 | |
| };
 | |
| 
 | |
| static int piix4_setup(struct pci_dev *PIIX4_dev,
 | |
| 		       const struct pci_device_id *id)
 | |
| {
 | |
| 	unsigned char temp;
 | |
| 	unsigned short piix4_smba;
 | |
| 
 | |
| 	if ((PIIX4_dev->vendor == PCI_VENDOR_ID_SERVERWORKS) &&
 | |
| 	    (PIIX4_dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB5))
 | |
| 		srvrworks_csb5_delay = 1;
 | |
| 
 | |
| 	/* On some motherboards, it was reported that accessing the SMBus
 | |
| 	   caused severe hardware problems */
 | |
| 	if (dmi_check_system(piix4_dmi_blacklist)) {
 | |
| 		dev_err(&PIIX4_dev->dev,
 | |
| 			"Accessing the SMBus on this system is unsafe!\n");
 | |
| 		return -EPERM;
 | |
| 	}
 | |
| 
 | |
| 	/* Don't access SMBus on IBM systems which get corrupted eeproms */
 | |
| 	if (dmi_check_system(piix4_dmi_ibm) &&
 | |
| 			PIIX4_dev->vendor == PCI_VENDOR_ID_INTEL) {
 | |
| 		dev_err(&PIIX4_dev->dev, "IBM system detected; this module "
 | |
| 			"may corrupt your serial eeprom! Refusing to load "
 | |
| 			"module!\n");
 | |
| 		return -EPERM;
 | |
| 	}
 | |
| 
 | |
| 	/* Determine the address of the SMBus areas */
 | |
| 	if (force_addr) {
 | |
| 		piix4_smba = force_addr & 0xfff0;
 | |
| 		force = 0;
 | |
| 	} else {
 | |
| 		pci_read_config_word(PIIX4_dev, SMBBA, &piix4_smba);
 | |
| 		piix4_smba &= 0xfff0;
 | |
| 		if(piix4_smba == 0) {
 | |
| 			dev_err(&PIIX4_dev->dev, "SMBus base address "
 | |
| 				"uninitialized - upgrade BIOS or use "
 | |
| 				"force_addr=0xaddr\n");
 | |
| 			return -ENODEV;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	if (acpi_check_region(piix4_smba, SMBIOSIZE, piix4_driver.name))
 | |
| 		return -ENODEV;
 | |
| 
 | |
| 	if (!request_region(piix4_smba, SMBIOSIZE, piix4_driver.name)) {
 | |
| 		dev_err(&PIIX4_dev->dev, "SMBus region 0x%x already in use!\n",
 | |
| 			piix4_smba);
 | |
| 		return -EBUSY;
 | |
| 	}
 | |
| 
 | |
| 	pci_read_config_byte(PIIX4_dev, SMBHSTCFG, &temp);
 | |
| 
 | |
| 	/* If force_addr is set, we program the new address here. Just to make
 | |
| 	   sure, we disable the PIIX4 first. */
 | |
| 	if (force_addr) {
 | |
| 		pci_write_config_byte(PIIX4_dev, SMBHSTCFG, temp & 0xfe);
 | |
| 		pci_write_config_word(PIIX4_dev, SMBBA, piix4_smba);
 | |
| 		pci_write_config_byte(PIIX4_dev, SMBHSTCFG, temp | 0x01);
 | |
| 		dev_info(&PIIX4_dev->dev, "WARNING: SMBus interface set to "
 | |
| 			"new address %04x!\n", piix4_smba);
 | |
| 	} else if ((temp & 1) == 0) {
 | |
| 		if (force) {
 | |
| 			/* This should never need to be done, but has been
 | |
| 			 * noted that many Dell machines have the SMBus
 | |
| 			 * interface on the PIIX4 disabled!? NOTE: This assumes
 | |
| 			 * I/O space and other allocations WERE done by the
 | |
| 			 * Bios!  Don't complain if your hardware does weird
 | |
| 			 * things after enabling this. :') Check for Bios
 | |
| 			 * updates before resorting to this.
 | |
| 			 */
 | |
| 			pci_write_config_byte(PIIX4_dev, SMBHSTCFG,
 | |
| 					      temp | 1);
 | |
| 			dev_notice(&PIIX4_dev->dev,
 | |
| 				   "WARNING: SMBus interface has been FORCEFULLY ENABLED!\n");
 | |
| 		} else {
 | |
| 			dev_err(&PIIX4_dev->dev,
 | |
| 				"SMBus Host Controller not enabled!\n");
 | |
| 			release_region(piix4_smba, SMBIOSIZE);
 | |
| 			return -ENODEV;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	if (((temp & 0x0E) == 8) || ((temp & 0x0E) == 2))
 | |
| 		dev_dbg(&PIIX4_dev->dev, "Using IRQ for SMBus\n");
 | |
| 	else if ((temp & 0x0E) == 0)
 | |
| 		dev_dbg(&PIIX4_dev->dev, "Using SMI# for SMBus\n");
 | |
| 	else
 | |
| 		dev_err(&PIIX4_dev->dev, "Illegal Interrupt configuration "
 | |
| 			"(or code out of date)!\n");
 | |
| 
 | |
| 	pci_read_config_byte(PIIX4_dev, SMBREV, &temp);
 | |
| 	dev_info(&PIIX4_dev->dev,
 | |
| 		 "SMBus Host Controller at 0x%x, revision %d\n",
 | |
| 		 piix4_smba, temp);
 | |
| 
 | |
| 	return piix4_smba;
 | |
| }
 | |
| 
 | |
| static int piix4_setup_sb800(struct pci_dev *PIIX4_dev,
 | |
| 			     const struct pci_device_id *id, u8 aux)
 | |
| {
 | |
| 	unsigned short piix4_smba;
 | |
| 	unsigned short smba_idx = 0xcd6;
 | |
| 	u8 smba_en_lo, smba_en_hi, smb_en, smb_en_status;
 | |
| 	u8 i2ccfg, i2ccfg_offset = 0x10;
 | |
| 
 | |
| 	/* SB800 and later SMBus does not support forcing address */
 | |
| 	if (force || force_addr) {
 | |
| 		dev_err(&PIIX4_dev->dev, "SMBus does not support "
 | |
| 			"forcing address!\n");
 | |
| 		return -EINVAL;
 | |
| 	}
 | |
| 
 | |
| 	/* Determine the address of the SMBus areas */
 | |
| 	if ((PIIX4_dev->vendor == PCI_VENDOR_ID_AMD &&
 | |
| 	     PIIX4_dev->device == PCI_DEVICE_ID_AMD_HUDSON2_SMBUS &&
 | |
| 	     PIIX4_dev->revision >= 0x41) ||
 | |
| 	    (PIIX4_dev->vendor == PCI_VENDOR_ID_AMD &&
 | |
| 	     PIIX4_dev->device == 0x790b &&
 | |
| 	     PIIX4_dev->revision >= 0x49))
 | |
| 		smb_en = 0x00;
 | |
| 	else
 | |
| 		smb_en = (aux) ? 0x28 : 0x2c;
 | |
| 
 | |
| 	if (!request_region(smba_idx, 2, "smba_idx")) {
 | |
| 		dev_err(&PIIX4_dev->dev, "SMBus base address index region "
 | |
| 			"0x%x already in use!\n", smba_idx);
 | |
| 		return -EBUSY;
 | |
| 	}
 | |
| 	outb_p(smb_en, smba_idx);
 | |
| 	smba_en_lo = inb_p(smba_idx + 1);
 | |
| 	outb_p(smb_en + 1, smba_idx);
 | |
| 	smba_en_hi = inb_p(smba_idx + 1);
 | |
| 	release_region(smba_idx, 2);
 | |
| 
 | |
| 	if (!smb_en) {
 | |
| 		smb_en_status = smba_en_lo & 0x10;
 | |
| 		piix4_smba = smba_en_hi << 8;
 | |
| 		if (aux)
 | |
| 			piix4_smba |= 0x20;
 | |
| 	} else {
 | |
| 		smb_en_status = smba_en_lo & 0x01;
 | |
| 		piix4_smba = ((smba_en_hi << 8) | smba_en_lo) & 0xffe0;
 | |
| 	}
 | |
| 
 | |
| 	if (!smb_en_status) {
 | |
| 		dev_err(&PIIX4_dev->dev,
 | |
| 			"SMBus Host Controller not enabled!\n");
 | |
| 		return -ENODEV;
 | |
| 	}
 | |
| 
 | |
| 	if (acpi_check_region(piix4_smba, SMBIOSIZE, piix4_driver.name))
 | |
| 		return -ENODEV;
 | |
| 
 | |
| 	if (!request_region(piix4_smba, SMBIOSIZE, piix4_driver.name)) {
 | |
| 		dev_err(&PIIX4_dev->dev, "SMBus region 0x%x already in use!\n",
 | |
| 			piix4_smba);
 | |
| 		return -EBUSY;
 | |
| 	}
 | |
| 
 | |
| 	/* Aux SMBus does not support IRQ information */
 | |
| 	if (aux) {
 | |
| 		dev_info(&PIIX4_dev->dev,
 | |
| 			 "Auxiliary SMBus Host Controller at 0x%x\n",
 | |
| 			 piix4_smba);
 | |
| 		return piix4_smba;
 | |
| 	}
 | |
| 
 | |
| 	/* Request the SMBus I2C bus config region */
 | |
| 	if (!request_region(piix4_smba + i2ccfg_offset, 1, "i2ccfg")) {
 | |
| 		dev_err(&PIIX4_dev->dev, "SMBus I2C bus config region "
 | |
| 			"0x%x already in use!\n", piix4_smba + i2ccfg_offset);
 | |
| 		release_region(piix4_smba, SMBIOSIZE);
 | |
| 		return -EBUSY;
 | |
| 	}
 | |
| 	i2ccfg = inb_p(piix4_smba + i2ccfg_offset);
 | |
| 	release_region(piix4_smba + i2ccfg_offset, 1);
 | |
| 
 | |
| 	if (i2ccfg & 1)
 | |
| 		dev_dbg(&PIIX4_dev->dev, "Using IRQ for SMBus\n");
 | |
| 	else
 | |
| 		dev_dbg(&PIIX4_dev->dev, "Using SMI# for SMBus\n");
 | |
| 
 | |
| 	dev_info(&PIIX4_dev->dev,
 | |
| 		 "SMBus Host Controller at 0x%x, revision %d\n",
 | |
| 		 piix4_smba, i2ccfg >> 4);
 | |
| 
 | |
| 	return piix4_smba;
 | |
| }
 | |
| 
 | |
| static int piix4_setup_aux(struct pci_dev *PIIX4_dev,
 | |
| 			   const struct pci_device_id *id,
 | |
| 			   unsigned short base_reg_addr)
 | |
| {
 | |
| 	/* Set up auxiliary SMBus controllers found on some
 | |
| 	 * AMD chipsets e.g. SP5100 (SB700 derivative) */
 | |
| 
 | |
| 	unsigned short piix4_smba;
 | |
| 
 | |
| 	/* Read address of auxiliary SMBus controller */
 | |
| 	pci_read_config_word(PIIX4_dev, base_reg_addr, &piix4_smba);
 | |
| 	if ((piix4_smba & 1) == 0) {
 | |
| 		dev_dbg(&PIIX4_dev->dev,
 | |
| 			"Auxiliary SMBus controller not enabled\n");
 | |
| 		return -ENODEV;
 | |
| 	}
 | |
| 
 | |
| 	piix4_smba &= 0xfff0;
 | |
| 	if (piix4_smba == 0) {
 | |
| 		dev_dbg(&PIIX4_dev->dev,
 | |
| 			"Auxiliary SMBus base address uninitialized\n");
 | |
| 		return -ENODEV;
 | |
| 	}
 | |
| 
 | |
| 	if (acpi_check_region(piix4_smba, SMBIOSIZE, piix4_driver.name))
 | |
| 		return -ENODEV;
 | |
| 
 | |
| 	if (!request_region(piix4_smba, SMBIOSIZE, piix4_driver.name)) {
 | |
| 		dev_err(&PIIX4_dev->dev, "Auxiliary SMBus region 0x%x "
 | |
| 			"already in use!\n", piix4_smba);
 | |
| 		return -EBUSY;
 | |
| 	}
 | |
| 
 | |
| 	dev_info(&PIIX4_dev->dev,
 | |
| 		 "Auxiliary SMBus Host Controller at 0x%x\n",
 | |
| 		 piix4_smba);
 | |
| 
 | |
| 	return piix4_smba;
 | |
| }
 | |
| 
 | |
| static int piix4_transaction(struct i2c_adapter *piix4_adapter)
 | |
| {
 | |
| 	struct i2c_piix4_adapdata *adapdata = i2c_get_adapdata(piix4_adapter);
 | |
| 	unsigned short piix4_smba = adapdata->smba;
 | |
| 	int temp;
 | |
| 	int result = 0;
 | |
| 	int timeout = 0;
 | |
| 
 | |
| 	dev_dbg(&piix4_adapter->dev, "Transaction (pre): CNT=%02x, CMD=%02x, "
 | |
| 		"ADD=%02x, DAT0=%02x, DAT1=%02x\n", inb_p(SMBHSTCNT),
 | |
| 		inb_p(SMBHSTCMD), inb_p(SMBHSTADD), inb_p(SMBHSTDAT0),
 | |
| 		inb_p(SMBHSTDAT1));
 | |
| 
 | |
| 	/* Make sure the SMBus host is ready to start transmitting */
 | |
| 	if ((temp = inb_p(SMBHSTSTS)) != 0x00) {
 | |
| 		dev_dbg(&piix4_adapter->dev, "SMBus busy (%02x). "
 | |
| 			"Resetting...\n", temp);
 | |
| 		outb_p(temp, SMBHSTSTS);
 | |
| 		if ((temp = inb_p(SMBHSTSTS)) != 0x00) {
 | |
| 			dev_err(&piix4_adapter->dev, "Failed! (%02x)\n", temp);
 | |
| 			return -EBUSY;
 | |
| 		} else {
 | |
| 			dev_dbg(&piix4_adapter->dev, "Successful!\n");
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	/* start the transaction by setting bit 6 */
 | |
| 	outb_p(inb(SMBHSTCNT) | 0x040, SMBHSTCNT);
 | |
| 
 | |
| 	/* We will always wait for a fraction of a second! (See PIIX4 docs errata) */
 | |
| 	if (srvrworks_csb5_delay) /* Extra delay for SERVERWORKS_CSB5 */
 | |
| 		msleep(2);
 | |
| 	else
 | |
| 		msleep(1);
 | |
| 
 | |
| 	while ((++timeout < MAX_TIMEOUT) &&
 | |
| 	       ((temp = inb_p(SMBHSTSTS)) & 0x01))
 | |
| 		msleep(1);
 | |
| 
 | |
| 	/* If the SMBus is still busy, we give up */
 | |
| 	if (timeout == MAX_TIMEOUT) {
 | |
| 		dev_err(&piix4_adapter->dev, "SMBus Timeout!\n");
 | |
| 		result = -ETIMEDOUT;
 | |
| 	}
 | |
| 
 | |
| 	if (temp & 0x10) {
 | |
| 		result = -EIO;
 | |
| 		dev_err(&piix4_adapter->dev, "Error: Failed bus transaction\n");
 | |
| 	}
 | |
| 
 | |
| 	if (temp & 0x08) {
 | |
| 		result = -EIO;
 | |
| 		dev_dbg(&piix4_adapter->dev, "Bus collision! SMBus may be "
 | |
| 			"locked until next hard reset. (sorry!)\n");
 | |
| 		/* Clock stops and slave is stuck in mid-transmission */
 | |
| 	}
 | |
| 
 | |
| 	if (temp & 0x04) {
 | |
| 		result = -ENXIO;
 | |
| 		dev_dbg(&piix4_adapter->dev, "Error: no response!\n");
 | |
| 	}
 | |
| 
 | |
| 	if (inb_p(SMBHSTSTS) != 0x00)
 | |
| 		outb_p(inb(SMBHSTSTS), SMBHSTSTS);
 | |
| 
 | |
| 	if ((temp = inb_p(SMBHSTSTS)) != 0x00) {
 | |
| 		dev_err(&piix4_adapter->dev, "Failed reset at end of "
 | |
| 			"transaction (%02x)\n", temp);
 | |
| 	}
 | |
| 	dev_dbg(&piix4_adapter->dev, "Transaction (post): CNT=%02x, CMD=%02x, "
 | |
| 		"ADD=%02x, DAT0=%02x, DAT1=%02x\n", inb_p(SMBHSTCNT),
 | |
| 		inb_p(SMBHSTCMD), inb_p(SMBHSTADD), inb_p(SMBHSTDAT0),
 | |
| 		inb_p(SMBHSTDAT1));
 | |
| 	return result;
 | |
| }
 | |
| 
 | |
| /* Return negative errno on error. */
 | |
| static s32 piix4_access(struct i2c_adapter * adap, u16 addr,
 | |
| 		 unsigned short flags, char read_write,
 | |
| 		 u8 command, int size, union i2c_smbus_data * data)
 | |
| {
 | |
| 	struct i2c_piix4_adapdata *adapdata = i2c_get_adapdata(adap);
 | |
| 	unsigned short piix4_smba = adapdata->smba;
 | |
| 	int i, len;
 | |
| 	int status;
 | |
| 
 | |
| 	switch (size) {
 | |
| 	case I2C_SMBUS_QUICK:
 | |
| 		outb_p((addr << 1) | read_write,
 | |
| 		       SMBHSTADD);
 | |
| 		size = PIIX4_QUICK;
 | |
| 		break;
 | |
| 	case I2C_SMBUS_BYTE:
 | |
| 		outb_p((addr << 1) | read_write,
 | |
| 		       SMBHSTADD);
 | |
| 		if (read_write == I2C_SMBUS_WRITE)
 | |
| 			outb_p(command, SMBHSTCMD);
 | |
| 		size = PIIX4_BYTE;
 | |
| 		break;
 | |
| 	case I2C_SMBUS_BYTE_DATA:
 | |
| 		outb_p((addr << 1) | read_write,
 | |
| 		       SMBHSTADD);
 | |
| 		outb_p(command, SMBHSTCMD);
 | |
| 		if (read_write == I2C_SMBUS_WRITE)
 | |
| 			outb_p(data->byte, SMBHSTDAT0);
 | |
| 		size = PIIX4_BYTE_DATA;
 | |
| 		break;
 | |
| 	case I2C_SMBUS_WORD_DATA:
 | |
| 		outb_p((addr << 1) | read_write,
 | |
| 		       SMBHSTADD);
 | |
| 		outb_p(command, SMBHSTCMD);
 | |
| 		if (read_write == I2C_SMBUS_WRITE) {
 | |
| 			outb_p(data->word & 0xff, SMBHSTDAT0);
 | |
| 			outb_p((data->word & 0xff00) >> 8, SMBHSTDAT1);
 | |
| 		}
 | |
| 		size = PIIX4_WORD_DATA;
 | |
| 		break;
 | |
| 	case I2C_SMBUS_BLOCK_DATA:
 | |
| 		outb_p((addr << 1) | read_write,
 | |
| 		       SMBHSTADD);
 | |
| 		outb_p(command, SMBHSTCMD);
 | |
| 		if (read_write == I2C_SMBUS_WRITE) {
 | |
| 			len = data->block[0];
 | |
| 			if (len == 0 || len > I2C_SMBUS_BLOCK_MAX)
 | |
| 				return -EINVAL;
 | |
| 			outb_p(len, SMBHSTDAT0);
 | |
| 			i = inb_p(SMBHSTCNT);	/* Reset SMBBLKDAT */
 | |
| 			for (i = 1; i <= len; i++)
 | |
| 				outb_p(data->block[i], SMBBLKDAT);
 | |
| 		}
 | |
| 		size = PIIX4_BLOCK_DATA;
 | |
| 		break;
 | |
| 	default:
 | |
| 		dev_warn(&adap->dev, "Unsupported transaction %d\n", size);
 | |
| 		return -EOPNOTSUPP;
 | |
| 	}
 | |
| 
 | |
| 	outb_p((size & 0x1C) + (ENABLE_INT9 & 1), SMBHSTCNT);
 | |
| 
 | |
| 	status = piix4_transaction(adap);
 | |
| 	if (status)
 | |
| 		return status;
 | |
| 
 | |
| 	if ((read_write == I2C_SMBUS_WRITE) || (size == PIIX4_QUICK))
 | |
| 		return 0;
 | |
| 
 | |
| 
 | |
| 	switch (size) {
 | |
| 	case PIIX4_BYTE:
 | |
| 	case PIIX4_BYTE_DATA:
 | |
| 		data->byte = inb_p(SMBHSTDAT0);
 | |
| 		break;
 | |
| 	case PIIX4_WORD_DATA:
 | |
| 		data->word = inb_p(SMBHSTDAT0) + (inb_p(SMBHSTDAT1) << 8);
 | |
| 		break;
 | |
| 	case PIIX4_BLOCK_DATA:
 | |
| 		data->block[0] = inb_p(SMBHSTDAT0);
 | |
| 		if (data->block[0] == 0 || data->block[0] > I2C_SMBUS_BLOCK_MAX)
 | |
| 			return -EPROTO;
 | |
| 		i = inb_p(SMBHSTCNT);	/* Reset SMBBLKDAT */
 | |
| 		for (i = 1; i <= data->block[0]; i++)
 | |
| 			data->block[i] = inb_p(SMBBLKDAT);
 | |
| 		break;
 | |
| 	}
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static u32 piix4_func(struct i2c_adapter *adapter)
 | |
| {
 | |
| 	return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
 | |
| 	    I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
 | |
| 	    I2C_FUNC_SMBUS_BLOCK_DATA;
 | |
| }
 | |
| 
 | |
| static const struct i2c_algorithm smbus_algorithm = {
 | |
| 	.smbus_xfer	= piix4_access,
 | |
| 	.functionality	= piix4_func,
 | |
| };
 | |
| 
 | |
| static const struct pci_device_id piix4_ids[] = {
 | |
| 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_3) },
 | |
| 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443MX_3) },
 | |
| 	{ PCI_DEVICE(PCI_VENDOR_ID_EFAR, PCI_DEVICE_ID_EFAR_SLC90E66_3) },
 | |
| 	{ PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP200_SMBUS) },
 | |
| 	{ PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP300_SMBUS) },
 | |
| 	{ PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP400_SMBUS) },
 | |
| 	{ PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SBX00_SMBUS) },
 | |
| 	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_HUDSON2_SMBUS) },
 | |
| 	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, 0x790b) },
 | |
| 	{ PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS,
 | |
| 		     PCI_DEVICE_ID_SERVERWORKS_OSB4) },
 | |
| 	{ PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS,
 | |
| 		     PCI_DEVICE_ID_SERVERWORKS_CSB5) },
 | |
| 	{ PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS,
 | |
| 		     PCI_DEVICE_ID_SERVERWORKS_CSB6) },
 | |
| 	{ PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS,
 | |
| 		     PCI_DEVICE_ID_SERVERWORKS_HT1000SB) },
 | |
| 	{ PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS,
 | |
| 		     PCI_DEVICE_ID_SERVERWORKS_HT1100LD) },
 | |
| 	{ 0, }
 | |
| };
 | |
| 
 | |
| MODULE_DEVICE_TABLE (pci, piix4_ids);
 | |
| 
 | |
| static struct i2c_adapter *piix4_main_adapter;
 | |
| static struct i2c_adapter *piix4_aux_adapter;
 | |
| 
 | |
| static int piix4_add_adapter(struct pci_dev *dev, unsigned short smba,
 | |
| 			     struct i2c_adapter **padap)
 | |
| {
 | |
| 	struct i2c_adapter *adap;
 | |
| 	struct i2c_piix4_adapdata *adapdata;
 | |
| 	int retval;
 | |
| 
 | |
| 	adap = kzalloc(sizeof(*adap), GFP_KERNEL);
 | |
| 	if (adap == NULL) {
 | |
| 		release_region(smba, SMBIOSIZE);
 | |
| 		return -ENOMEM;
 | |
| 	}
 | |
| 
 | |
| 	adap->owner = THIS_MODULE;
 | |
| 	adap->class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
 | |
| 	adap->algo = &smbus_algorithm;
 | |
| 
 | |
| 	adapdata = kzalloc(sizeof(*adapdata), GFP_KERNEL);
 | |
| 	if (adapdata == NULL) {
 | |
| 		kfree(adap);
 | |
| 		release_region(smba, SMBIOSIZE);
 | |
| 		return -ENOMEM;
 | |
| 	}
 | |
| 
 | |
| 	adapdata->smba = smba;
 | |
| 
 | |
| 	/* set up the sysfs linkage to our parent device */
 | |
| 	adap->dev.parent = &dev->dev;
 | |
| 
 | |
| 	snprintf(adap->name, sizeof(adap->name),
 | |
| 		"SMBus PIIX4 adapter at %04x", smba);
 | |
| 
 | |
| 	i2c_set_adapdata(adap, adapdata);
 | |
| 
 | |
| 	retval = i2c_add_adapter(adap);
 | |
| 	if (retval) {
 | |
| 		dev_err(&dev->dev, "Couldn't register adapter!\n");
 | |
| 		kfree(adapdata);
 | |
| 		kfree(adap);
 | |
| 		release_region(smba, SMBIOSIZE);
 | |
| 		return retval;
 | |
| 	}
 | |
| 
 | |
| 	*padap = adap;
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int piix4_probe(struct pci_dev *dev, const struct pci_device_id *id)
 | |
| {
 | |
| 	int retval;
 | |
| 
 | |
| 	if ((dev->vendor == PCI_VENDOR_ID_ATI &&
 | |
| 	     dev->device == PCI_DEVICE_ID_ATI_SBX00_SMBUS &&
 | |
| 	     dev->revision >= 0x40) ||
 | |
| 	    dev->vendor == PCI_VENDOR_ID_AMD)
 | |
| 		/* base address location etc changed in SB800 */
 | |
| 		retval = piix4_setup_sb800(dev, id, 0);
 | |
| 	else
 | |
| 		retval = piix4_setup(dev, id);
 | |
| 
 | |
| 	/* If no main SMBus found, give up */
 | |
| 	if (retval < 0)
 | |
| 		return retval;
 | |
| 
 | |
| 	/* Try to register main SMBus adapter, give up if we can't */
 | |
| 	retval = piix4_add_adapter(dev, retval, &piix4_main_adapter);
 | |
| 	if (retval < 0)
 | |
| 		return retval;
 | |
| 
 | |
| 	/* Check for auxiliary SMBus on some AMD chipsets */
 | |
| 	retval = -ENODEV;
 | |
| 
 | |
| 	if (dev->vendor == PCI_VENDOR_ID_ATI &&
 | |
| 	    dev->device == PCI_DEVICE_ID_ATI_SBX00_SMBUS) {
 | |
| 		if (dev->revision < 0x40) {
 | |
| 			retval = piix4_setup_aux(dev, id, 0x58);
 | |
| 		} else {
 | |
| 			/* SB800 added aux bus too */
 | |
| 			retval = piix4_setup_sb800(dev, id, 1);
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	if (dev->vendor == PCI_VENDOR_ID_AMD &&
 | |
| 	    dev->device == PCI_DEVICE_ID_AMD_HUDSON2_SMBUS) {
 | |
| 		retval = piix4_setup_sb800(dev, id, 1);
 | |
| 	}
 | |
| 
 | |
| 	if (retval > 0) {
 | |
| 		/* Try to add the aux adapter if it exists,
 | |
| 		 * piix4_add_adapter will clean up if this fails */
 | |
| 		piix4_add_adapter(dev, retval, &piix4_aux_adapter);
 | |
| 	}
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static void piix4_adap_remove(struct i2c_adapter *adap)
 | |
| {
 | |
| 	struct i2c_piix4_adapdata *adapdata = i2c_get_adapdata(adap);
 | |
| 
 | |
| 	if (adapdata->smba) {
 | |
| 		i2c_del_adapter(adap);
 | |
| 		release_region(adapdata->smba, SMBIOSIZE);
 | |
| 		kfree(adapdata);
 | |
| 		kfree(adap);
 | |
| 	}
 | |
| }
 | |
| 
 | |
| static void piix4_remove(struct pci_dev *dev)
 | |
| {
 | |
| 	if (piix4_main_adapter) {
 | |
| 		piix4_adap_remove(piix4_main_adapter);
 | |
| 		piix4_main_adapter = NULL;
 | |
| 	}
 | |
| 
 | |
| 	if (piix4_aux_adapter) {
 | |
| 		piix4_adap_remove(piix4_aux_adapter);
 | |
| 		piix4_aux_adapter = NULL;
 | |
| 	}
 | |
| }
 | |
| 
 | |
| static struct pci_driver piix4_driver = {
 | |
| 	.name		= "piix4_smbus",
 | |
| 	.id_table	= piix4_ids,
 | |
| 	.probe		= piix4_probe,
 | |
| 	.remove		= piix4_remove,
 | |
| };
 | |
| 
 | |
| module_pci_driver(piix4_driver);
 | |
| 
 | |
| MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl> and "
 | |
| 		"Philip Edelbrock <phil@netroedge.com>");
 | |
| MODULE_DESCRIPTION("PIIX4 SMBus driver");
 | |
| MODULE_LICENSE("GPL");
 |