 0b336cea56
			
		
	
	
	0b336cea56
	
	
	
		
			
			of_get_gpio() might return -EPROBE_DEFER meaning that the driver providing the gpio isn't ready yet. If that happens for the first gpio the resulting kernel output without this patch is: w1-gpio somename: Failed to parse DT platform somename: Driver w1-gpio requests probe deferral The first message is misleading and so is suppressed with this patch. Further if determining the gpio to switch the external pullup yields -EPROBE_DEFER this error should be passed back to the caller instead of just continuing without pullup. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
		
			
				
	
	
		
			244 lines
		
	
	
	
		
			5.3 KiB
			
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			244 lines
		
	
	
	
		
			5.3 KiB
			
		
	
	
	
		
			C
		
	
	
	
	
	
| /*
 | |
|  * w1-gpio - GPIO w1 bus master driver
 | |
|  *
 | |
|  * Copyright (C) 2007 Ville Syrjala <syrjala@sci.fi>
 | |
|  *
 | |
|  * This program is free software; you can redistribute it and/or modify
 | |
|  * it under the terms of the GNU General Public License version 2
 | |
|  * as published by the Free Software Foundation.
 | |
|  */
 | |
| 
 | |
| #include <linux/init.h>
 | |
| #include <linux/module.h>
 | |
| #include <linux/platform_device.h>
 | |
| #include <linux/slab.h>
 | |
| #include <linux/w1-gpio.h>
 | |
| #include <linux/gpio.h>
 | |
| #include <linux/of_platform.h>
 | |
| #include <linux/of_gpio.h>
 | |
| #include <linux/err.h>
 | |
| #include <linux/of.h>
 | |
| #include <linux/delay.h>
 | |
| 
 | |
| #include "../w1.h"
 | |
| #include "../w1_int.h"
 | |
| 
 | |
| static u8 w1_gpio_set_pullup(void *data, int delay)
 | |
| {
 | |
| 	struct w1_gpio_platform_data *pdata = data;
 | |
| 
 | |
| 	if (delay) {
 | |
| 		pdata->pullup_duration = delay;
 | |
| 	} else {
 | |
| 		if (pdata->pullup_duration) {
 | |
| 			gpio_direction_output(pdata->pin, 1);
 | |
| 
 | |
| 			msleep(pdata->pullup_duration);
 | |
| 
 | |
| 			gpio_direction_input(pdata->pin);
 | |
| 		}
 | |
| 		pdata->pullup_duration = 0;
 | |
| 	}
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static void w1_gpio_write_bit_dir(void *data, u8 bit)
 | |
| {
 | |
| 	struct w1_gpio_platform_data *pdata = data;
 | |
| 
 | |
| 	if (bit)
 | |
| 		gpio_direction_input(pdata->pin);
 | |
| 	else
 | |
| 		gpio_direction_output(pdata->pin, 0);
 | |
| }
 | |
| 
 | |
| static void w1_gpio_write_bit_val(void *data, u8 bit)
 | |
| {
 | |
| 	struct w1_gpio_platform_data *pdata = data;
 | |
| 
 | |
| 	gpio_set_value(pdata->pin, bit);
 | |
| }
 | |
| 
 | |
| static u8 w1_gpio_read_bit(void *data)
 | |
| {
 | |
| 	struct w1_gpio_platform_data *pdata = data;
 | |
| 
 | |
| 	return gpio_get_value(pdata->pin) ? 1 : 0;
 | |
| }
 | |
| 
 | |
| #if defined(CONFIG_OF)
 | |
| static struct of_device_id w1_gpio_dt_ids[] = {
 | |
| 	{ .compatible = "w1-gpio" },
 | |
| 	{}
 | |
| };
 | |
| MODULE_DEVICE_TABLE(of, w1_gpio_dt_ids);
 | |
| #endif
 | |
| 
 | |
| static int w1_gpio_probe_dt(struct platform_device *pdev)
 | |
| {
 | |
| 	struct w1_gpio_platform_data *pdata = dev_get_platdata(&pdev->dev);
 | |
| 	struct device_node *np = pdev->dev.of_node;
 | |
| 	int gpio;
 | |
| 
 | |
| 	pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
 | |
| 	if (!pdata)
 | |
| 		return -ENOMEM;
 | |
| 
 | |
| 	if (of_get_property(np, "linux,open-drain", NULL))
 | |
| 		pdata->is_open_drain = 1;
 | |
| 
 | |
| 	gpio = of_get_gpio(np, 0);
 | |
| 	if (gpio < 0) {
 | |
| 		if (gpio != -EPROBE_DEFER)
 | |
| 			dev_err(&pdev->dev,
 | |
| 					"Failed to parse gpio property for data pin (%d)\n",
 | |
| 					gpio);
 | |
| 
 | |
| 		return gpio;
 | |
| 	}
 | |
| 	pdata->pin = gpio;
 | |
| 
 | |
| 	gpio = of_get_gpio(np, 1);
 | |
| 	if (gpio == -EPROBE_DEFER)
 | |
| 		return gpio;
 | |
| 	/* ignore other errors as the pullup gpio is optional */
 | |
| 	pdata->ext_pullup_enable_pin = gpio;
 | |
| 
 | |
| 	pdev->dev.platform_data = pdata;
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int w1_gpio_probe(struct platform_device *pdev)
 | |
| {
 | |
| 	struct w1_bus_master *master;
 | |
| 	struct w1_gpio_platform_data *pdata;
 | |
| 	int err;
 | |
| 
 | |
| 	if (of_have_populated_dt()) {
 | |
| 		err = w1_gpio_probe_dt(pdev);
 | |
| 		if (err < 0)
 | |
| 			return err;
 | |
| 	}
 | |
| 
 | |
| 	pdata = dev_get_platdata(&pdev->dev);
 | |
| 
 | |
| 	if (!pdata) {
 | |
| 		dev_err(&pdev->dev, "No configuration data\n");
 | |
| 		return -ENXIO;
 | |
| 	}
 | |
| 
 | |
| 	master = devm_kzalloc(&pdev->dev, sizeof(struct w1_bus_master),
 | |
| 			GFP_KERNEL);
 | |
| 	if (!master) {
 | |
| 		dev_err(&pdev->dev, "Out of memory\n");
 | |
| 		return -ENOMEM;
 | |
| 	}
 | |
| 
 | |
| 	err = devm_gpio_request(&pdev->dev, pdata->pin, "w1");
 | |
| 	if (err) {
 | |
| 		dev_err(&pdev->dev, "gpio_request (pin) failed\n");
 | |
| 		return err;
 | |
| 	}
 | |
| 
 | |
| 	if (gpio_is_valid(pdata->ext_pullup_enable_pin)) {
 | |
| 		err = devm_gpio_request_one(&pdev->dev,
 | |
| 				pdata->ext_pullup_enable_pin, GPIOF_INIT_LOW,
 | |
| 				"w1 pullup");
 | |
| 		if (err < 0) {
 | |
| 			dev_err(&pdev->dev, "gpio_request_one "
 | |
| 					"(ext_pullup_enable_pin) failed\n");
 | |
| 			return err;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	master->data = pdata;
 | |
| 	master->read_bit = w1_gpio_read_bit;
 | |
| 
 | |
| 	if (pdata->is_open_drain) {
 | |
| 		gpio_direction_output(pdata->pin, 1);
 | |
| 		master->write_bit = w1_gpio_write_bit_val;
 | |
| 	} else {
 | |
| 		gpio_direction_input(pdata->pin);
 | |
| 		master->write_bit = w1_gpio_write_bit_dir;
 | |
| 		master->set_pullup = w1_gpio_set_pullup;
 | |
| 	}
 | |
| 
 | |
| 	err = w1_add_master_device(master);
 | |
| 	if (err) {
 | |
| 		dev_err(&pdev->dev, "w1_add_master device failed\n");
 | |
| 		return err;
 | |
| 	}
 | |
| 
 | |
| 	if (pdata->enable_external_pullup)
 | |
| 		pdata->enable_external_pullup(1);
 | |
| 
 | |
| 	if (gpio_is_valid(pdata->ext_pullup_enable_pin))
 | |
| 		gpio_set_value(pdata->ext_pullup_enable_pin, 1);
 | |
| 
 | |
| 	platform_set_drvdata(pdev, master);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int w1_gpio_remove(struct platform_device *pdev)
 | |
| {
 | |
| 	struct w1_bus_master *master = platform_get_drvdata(pdev);
 | |
| 	struct w1_gpio_platform_data *pdata = dev_get_platdata(&pdev->dev);
 | |
| 
 | |
| 	if (pdata->enable_external_pullup)
 | |
| 		pdata->enable_external_pullup(0);
 | |
| 
 | |
| 	if (gpio_is_valid(pdata->ext_pullup_enable_pin))
 | |
| 		gpio_set_value(pdata->ext_pullup_enable_pin, 0);
 | |
| 
 | |
| 	w1_remove_master_device(master);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| #ifdef CONFIG_PM
 | |
| 
 | |
| static int w1_gpio_suspend(struct platform_device *pdev, pm_message_t state)
 | |
| {
 | |
| 	struct w1_gpio_platform_data *pdata = dev_get_platdata(&pdev->dev);
 | |
| 
 | |
| 	if (pdata->enable_external_pullup)
 | |
| 		pdata->enable_external_pullup(0);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int w1_gpio_resume(struct platform_device *pdev)
 | |
| {
 | |
| 	struct w1_gpio_platform_data *pdata = dev_get_platdata(&pdev->dev);
 | |
| 
 | |
| 	if (pdata->enable_external_pullup)
 | |
| 		pdata->enable_external_pullup(1);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| #else
 | |
| #define w1_gpio_suspend	NULL
 | |
| #define w1_gpio_resume	NULL
 | |
| #endif
 | |
| 
 | |
| static struct platform_driver w1_gpio_driver = {
 | |
| 	.driver = {
 | |
| 		.name	= "w1-gpio",
 | |
| 		.owner	= THIS_MODULE,
 | |
| 		.of_match_table = of_match_ptr(w1_gpio_dt_ids),
 | |
| 	},
 | |
| 	.probe = w1_gpio_probe,
 | |
| 	.remove	= w1_gpio_remove,
 | |
| 	.suspend = w1_gpio_suspend,
 | |
| 	.resume = w1_gpio_resume,
 | |
| };
 | |
| 
 | |
| module_platform_driver(w1_gpio_driver);
 | |
| 
 | |
| MODULE_DESCRIPTION("GPIO w1 bus master driver");
 | |
| MODULE_AUTHOR("Ville Syrjala <syrjala@sci.fi>");
 | |
| MODULE_LICENSE("GPL");
 |