 e47c5a0906
			
		
	
	
	e47c5a0906
	
	
	
		
			
			This patch adds the glue code required to ensure the on-chip EHCI controller works on STi consumer electronics SoC's from STMicroelectronics. It mainly manages the setting and enabling of the relevant clocks and manages the reset / power signals to the IP block. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
		
			
				
	
	
		
			375 lines
		
	
	
	
		
			8.5 KiB
			
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			375 lines
		
	
	
	
		
			8.5 KiB
			
		
	
	
	
		
			C
		
	
	
	
	
	
| /*
 | ||
|  * ST EHCI driver
 | ||
|  *
 | ||
|  * Copyright (C) 2014 STMicroelectronics – All Rights Reserved
 | ||
|  *
 | ||
|  * Author: Peter Griffin <peter.griffin@linaro.org>
 | ||
|  *
 | ||
|  * Derived from ehci-platform.c
 | ||
|  *
 | ||
|  * This program is free software; you can redistribute it and/or modify
 | ||
|  * it under the terms of the GNU General Public License version 2 as
 | ||
|  * published by the Free Software Foundation.
 | ||
|  */
 | ||
| 
 | ||
| #include <linux/clk.h>
 | ||
| #include <linux/dma-mapping.h>
 | ||
| #include <linux/err.h>
 | ||
| #include <linux/kernel.h>
 | ||
| #include <linux/hrtimer.h>
 | ||
| #include <linux/io.h>
 | ||
| #include <linux/module.h>
 | ||
| #include <linux/of.h>
 | ||
| #include <linux/phy/phy.h>
 | ||
| #include <linux/platform_device.h>
 | ||
| #include <linux/reset.h>
 | ||
| #include <linux/usb.h>
 | ||
| #include <linux/usb/hcd.h>
 | ||
| #include <linux/usb/ehci_pdriver.h>
 | ||
| 
 | ||
| #include "ehci.h"
 | ||
| 
 | ||
| #define USB_MAX_CLKS 3
 | ||
| 
 | ||
| struct st_ehci_platform_priv {
 | ||
| 	struct clk *clks[USB_MAX_CLKS];
 | ||
| 	struct clk *clk48;
 | ||
| 	struct reset_control *rst;
 | ||
| 	struct reset_control *pwr;
 | ||
| 	struct phy *phy;
 | ||
| };
 | ||
| 
 | ||
| #define DRIVER_DESC "EHCI STMicroelectronics driver"
 | ||
| 
 | ||
| #define hcd_to_ehci_priv(h) \
 | ||
| 	((struct st_ehci_platform_priv *)hcd_to_ehci(h)->priv)
 | ||
| 
 | ||
| static const char hcd_name[] = "ehci-st";
 | ||
| 
 | ||
| #define EHCI_CAPS_SIZE 0x10
 | ||
| #define AHB2STBUS_INSREG01 (EHCI_CAPS_SIZE + 0x84)
 | ||
| 
 | ||
| static int st_ehci_platform_reset(struct usb_hcd *hcd)
 | ||
| {
 | ||
| 	struct platform_device *pdev = to_platform_device(hcd->self.controller);
 | ||
| 	struct usb_ehci_pdata *pdata = dev_get_platdata(&pdev->dev);
 | ||
| 	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
 | ||
| 	int retval;
 | ||
| 	u32 threshold;
 | ||
| 
 | ||
| 	/* Set EHCI packet buffer IN/OUT threshold to 128 bytes */
 | ||
| 	threshold = 128 | (128 << 16);
 | ||
| 	writel(threshold, hcd->regs + AHB2STBUS_INSREG01);
 | ||
| 
 | ||
| 	ehci->caps = hcd->regs + pdata->caps_offset;
 | ||
| 	retval = ehci_setup(hcd);
 | ||
| 	if (retval)
 | ||
| 		return retval;
 | ||
| 
 | ||
| 	return 0;
 | ||
| }
 | ||
| 
 | ||
| static int st_ehci_platform_power_on(struct platform_device *dev)
 | ||
| {
 | ||
| 	struct usb_hcd *hcd = platform_get_drvdata(dev);
 | ||
| 	struct st_ehci_platform_priv *priv = hcd_to_ehci_priv(hcd);
 | ||
| 	int clk, ret;
 | ||
| 
 | ||
| 	ret = reset_control_deassert(priv->pwr);
 | ||
| 	if (ret)
 | ||
| 		return ret;
 | ||
| 
 | ||
| 	ret = reset_control_deassert(priv->rst);
 | ||
| 	if (ret)
 | ||
| 		goto err_assert_power;
 | ||
| 
 | ||
| 	/* some SoCs don't have a dedicated 48Mhz clock, but those that do
 | ||
| 	   need the rate to be explicitly set */
 | ||
| 	if (priv->clk48) {
 | ||
| 		ret = clk_set_rate(priv->clk48, 48000000);
 | ||
| 		if (ret)
 | ||
| 			goto err_assert_reset;
 | ||
| 	}
 | ||
| 
 | ||
| 	for (clk = 0; clk < USB_MAX_CLKS && priv->clks[clk]; clk++) {
 | ||
| 		ret = clk_prepare_enable(priv->clks[clk]);
 | ||
| 		if (ret)
 | ||
| 			goto err_disable_clks;
 | ||
| 	}
 | ||
| 
 | ||
| 	ret = phy_init(priv->phy);
 | ||
| 	if (ret)
 | ||
| 		goto err_disable_clks;
 | ||
| 
 | ||
| 	ret = phy_power_on(priv->phy);
 | ||
| 	if (ret)
 | ||
| 		goto err_exit_phy;
 | ||
| 
 | ||
| 	return 0;
 | ||
| 
 | ||
| err_exit_phy:
 | ||
| 	phy_exit(priv->phy);
 | ||
| err_disable_clks:
 | ||
| 	while (--clk >= 0)
 | ||
| 		clk_disable_unprepare(priv->clks[clk]);
 | ||
| err_assert_reset:
 | ||
| 	reset_control_assert(priv->rst);
 | ||
| err_assert_power:
 | ||
| 	reset_control_assert(priv->pwr);
 | ||
| 
 | ||
| 	return ret;
 | ||
| }
 | ||
| 
 | ||
| static void st_ehci_platform_power_off(struct platform_device *dev)
 | ||
| {
 | ||
| 	struct usb_hcd *hcd = platform_get_drvdata(dev);
 | ||
| 	struct st_ehci_platform_priv *priv = hcd_to_ehci_priv(hcd);
 | ||
| 	int clk;
 | ||
| 
 | ||
| 	reset_control_assert(priv->pwr);
 | ||
| 
 | ||
| 	reset_control_assert(priv->rst);
 | ||
| 
 | ||
| 	phy_power_off(priv->phy);
 | ||
| 
 | ||
| 	phy_exit(priv->phy);
 | ||
| 
 | ||
| 	for (clk = USB_MAX_CLKS - 1; clk >= 0; clk--)
 | ||
| 		if (priv->clks[clk])
 | ||
| 			clk_disable_unprepare(priv->clks[clk]);
 | ||
| 
 | ||
| }
 | ||
| 
 | ||
| static struct hc_driver __read_mostly ehci_platform_hc_driver;
 | ||
| 
 | ||
| static const struct ehci_driver_overrides platform_overrides __initconst = {
 | ||
| 	.reset =		st_ehci_platform_reset,
 | ||
| 	.extra_priv_size =	sizeof(struct st_ehci_platform_priv),
 | ||
| };
 | ||
| 
 | ||
| static struct usb_ehci_pdata ehci_platform_defaults = {
 | ||
| 	.power_on =		st_ehci_platform_power_on,
 | ||
| 	.power_suspend =	st_ehci_platform_power_off,
 | ||
| 	.power_off =		st_ehci_platform_power_off,
 | ||
| };
 | ||
| 
 | ||
| static int st_ehci_platform_probe(struct platform_device *dev)
 | ||
| {
 | ||
| 	struct usb_hcd *hcd;
 | ||
| 	struct resource *res_mem;
 | ||
| 	struct usb_ehci_pdata *pdata = &ehci_platform_defaults;
 | ||
| 	struct st_ehci_platform_priv *priv;
 | ||
| 	struct ehci_hcd *ehci;
 | ||
| 	int err, irq, clk = 0;
 | ||
| 
 | ||
| 	if (usb_disabled())
 | ||
| 		return -ENODEV;
 | ||
| 
 | ||
| 	irq = platform_get_irq(dev, 0);
 | ||
| 	if (irq < 0) {
 | ||
| 		dev_err(&dev->dev, "no irq provided");
 | ||
| 		return irq;
 | ||
| 	}
 | ||
| 	res_mem = platform_get_resource(dev, IORESOURCE_MEM, 0);
 | ||
| 	if (!res_mem) {
 | ||
| 		dev_err(&dev->dev, "no memory resource provided");
 | ||
| 		return -ENXIO;
 | ||
| 	}
 | ||
| 
 | ||
| 	hcd = usb_create_hcd(&ehci_platform_hc_driver, &dev->dev,
 | ||
| 			     dev_name(&dev->dev));
 | ||
| 	if (!hcd)
 | ||
| 		return -ENOMEM;
 | ||
| 
 | ||
| 	platform_set_drvdata(dev, hcd);
 | ||
| 	dev->dev.platform_data = pdata;
 | ||
| 	priv = hcd_to_ehci_priv(hcd);
 | ||
| 	ehci = hcd_to_ehci(hcd);
 | ||
| 
 | ||
| 	priv->phy = devm_phy_get(&dev->dev, "usb");
 | ||
| 	if (IS_ERR(priv->phy)) {
 | ||
| 		err = PTR_ERR(priv->phy);
 | ||
| 		goto err_put_hcd;
 | ||
| 	}
 | ||
| 
 | ||
| 	for (clk = 0; clk < USB_MAX_CLKS; clk++) {
 | ||
| 		priv->clks[clk] = of_clk_get(dev->dev.of_node, clk);
 | ||
| 		if (IS_ERR(priv->clks[clk])) {
 | ||
| 			err = PTR_ERR(priv->clks[clk]);
 | ||
| 			if (err == -EPROBE_DEFER)
 | ||
| 				goto err_put_clks;
 | ||
| 			priv->clks[clk] = NULL;
 | ||
| 			break;
 | ||
| 		}
 | ||
| 	}
 | ||
| 
 | ||
| 	/* some SoCs don't have a dedicated 48Mhz clock, but those that
 | ||
| 	   do need the rate to be explicitly set */
 | ||
| 	priv->clk48 = devm_clk_get(&dev->dev, "clk48");
 | ||
| 	if (IS_ERR(priv->clk48)) {
 | ||
| 		dev_info(&dev->dev, "48MHz clk not found\n");
 | ||
| 		priv->clk48 = NULL;
 | ||
| 	}
 | ||
| 
 | ||
| 	priv->pwr = devm_reset_control_get_optional(&dev->dev, "power");
 | ||
| 	if (IS_ERR(priv->pwr)) {
 | ||
| 		err = PTR_ERR(priv->pwr);
 | ||
| 		if (err == -EPROBE_DEFER)
 | ||
| 			goto err_put_clks;
 | ||
| 		priv->pwr = NULL;
 | ||
| 	}
 | ||
| 
 | ||
| 	priv->rst = devm_reset_control_get_optional(&dev->dev, "softreset");
 | ||
| 	if (IS_ERR(priv->rst)) {
 | ||
| 		err = PTR_ERR(priv->rst);
 | ||
| 		if (err == -EPROBE_DEFER)
 | ||
| 			goto err_put_clks;
 | ||
| 		priv->rst = NULL;
 | ||
| 	}
 | ||
| 
 | ||
| 	if (pdata->power_on) {
 | ||
| 		err = pdata->power_on(dev);
 | ||
| 		if (err < 0)
 | ||
| 			goto err_put_clks;
 | ||
| 	}
 | ||
| 
 | ||
| 	hcd->rsrc_start = res_mem->start;
 | ||
| 	hcd->rsrc_len = resource_size(res_mem);
 | ||
| 
 | ||
| 	hcd->regs = devm_ioremap_resource(&dev->dev, res_mem);
 | ||
| 	if (IS_ERR(hcd->regs)) {
 | ||
| 		err = PTR_ERR(hcd->regs);
 | ||
| 		goto err_put_clks;
 | ||
| 	}
 | ||
| 
 | ||
| 	err = usb_add_hcd(hcd, irq, IRQF_SHARED);
 | ||
| 	if (err)
 | ||
| 		goto err_put_clks;
 | ||
| 
 | ||
| 	device_wakeup_enable(hcd->self.controller);
 | ||
| 	platform_set_drvdata(dev, hcd);
 | ||
| 
 | ||
| 	return err;
 | ||
| 
 | ||
| err_put_clks:
 | ||
| 	while (--clk >= 0)
 | ||
| 		clk_put(priv->clks[clk]);
 | ||
| err_put_hcd:
 | ||
| 	if (pdata == &ehci_platform_defaults)
 | ||
| 		dev->dev.platform_data = NULL;
 | ||
| 
 | ||
| 	usb_put_hcd(hcd);
 | ||
| 
 | ||
| 	return err;
 | ||
| }
 | ||
| 
 | ||
| static int st_ehci_platform_remove(struct platform_device *dev)
 | ||
| {
 | ||
| 	struct usb_hcd *hcd = platform_get_drvdata(dev);
 | ||
| 	struct usb_ehci_pdata *pdata = dev_get_platdata(&dev->dev);
 | ||
| 	struct st_ehci_platform_priv *priv = hcd_to_ehci_priv(hcd);
 | ||
| 	int clk;
 | ||
| 
 | ||
| 	usb_remove_hcd(hcd);
 | ||
| 
 | ||
| 	if (pdata->power_off)
 | ||
| 		pdata->power_off(dev);
 | ||
| 
 | ||
| 	for (clk = 0; clk < USB_MAX_CLKS && priv->clks[clk]; clk++)
 | ||
| 		clk_put(priv->clks[clk]);
 | ||
| 
 | ||
| 	usb_put_hcd(hcd);
 | ||
| 
 | ||
| 	if (pdata == &ehci_platform_defaults)
 | ||
| 		dev->dev.platform_data = NULL;
 | ||
| 
 | ||
| 	return 0;
 | ||
| }
 | ||
| 
 | ||
| #ifdef CONFIG_PM_SLEEP
 | ||
| 
 | ||
| static int st_ehci_suspend(struct device *dev)
 | ||
| {
 | ||
| 	struct usb_hcd *hcd = dev_get_drvdata(dev);
 | ||
| 	struct usb_ehci_pdata *pdata = dev_get_platdata(dev);
 | ||
| 	struct platform_device *pdev =
 | ||
| 		container_of(dev, struct platform_device, dev);
 | ||
| 	bool do_wakeup = device_may_wakeup(dev);
 | ||
| 	int ret;
 | ||
| 
 | ||
| 	ret = ehci_suspend(hcd, do_wakeup);
 | ||
| 	if (ret)
 | ||
| 		return ret;
 | ||
| 
 | ||
| 	if (pdata->power_suspend)
 | ||
| 		pdata->power_suspend(pdev);
 | ||
| 
 | ||
| 	pinctrl_pm_select_sleep_state(dev);
 | ||
| 
 | ||
| 	return ret;
 | ||
| }
 | ||
| 
 | ||
| static int st_ehci_resume(struct device *dev)
 | ||
| {
 | ||
| 	struct usb_hcd *hcd = dev_get_drvdata(dev);
 | ||
| 	struct usb_ehci_pdata *pdata = dev_get_platdata(dev);
 | ||
| 	struct platform_device *pdev =
 | ||
| 		container_of(dev, struct platform_device, dev);
 | ||
| 	int err;
 | ||
| 
 | ||
| 	pinctrl_pm_select_default_state(dev);
 | ||
| 
 | ||
| 	if (pdata->power_on) {
 | ||
| 		err = pdata->power_on(pdev);
 | ||
| 		if (err < 0)
 | ||
| 			return err;
 | ||
| 	}
 | ||
| 
 | ||
| 	ehci_resume(hcd, false);
 | ||
| 	return 0;
 | ||
| }
 | ||
| 
 | ||
| static SIMPLE_DEV_PM_OPS(st_ehci_pm_ops, st_ehci_suspend, st_ehci_resume);
 | ||
| 
 | ||
| #endif /* CONFIG_PM_SLEEP */
 | ||
| 
 | ||
| static const struct of_device_id st_ehci_ids[] = {
 | ||
| 	{ .compatible = "st,st-ehci-300x", },
 | ||
| 	{ /* sentinel */ }
 | ||
| };
 | ||
| MODULE_DEVICE_TABLE(of, st_ehci_ids);
 | ||
| 
 | ||
| static struct platform_driver ehci_platform_driver = {
 | ||
| 	.probe		= st_ehci_platform_probe,
 | ||
| 	.remove		= st_ehci_platform_remove,
 | ||
| 	.shutdown	= usb_hcd_platform_shutdown,
 | ||
| 	.driver		= {
 | ||
| 		.name	= "st-ehci",
 | ||
| #ifdef CONFIG_PM_SLEEP
 | ||
| 		.pm	= &st_ehci_pm_ops,
 | ||
| #endif
 | ||
| 		.of_match_table = st_ehci_ids,
 | ||
| 	}
 | ||
| };
 | ||
| 
 | ||
| static int __init ehci_platform_init(void)
 | ||
| {
 | ||
| 	if (usb_disabled())
 | ||
| 		return -ENODEV;
 | ||
| 
 | ||
| 	pr_info("%s: " DRIVER_DESC "\n", hcd_name);
 | ||
| 
 | ||
| 	ehci_init_driver(&ehci_platform_hc_driver, &platform_overrides);
 | ||
| 	return platform_driver_register(&ehci_platform_driver);
 | ||
| }
 | ||
| module_init(ehci_platform_init);
 | ||
| 
 | ||
| static void __exit ehci_platform_cleanup(void)
 | ||
| {
 | ||
| 	platform_driver_unregister(&ehci_platform_driver);
 | ||
| }
 | ||
| module_exit(ehci_platform_cleanup);
 | ||
| 
 | ||
| MODULE_DESCRIPTION(DRIVER_DESC);
 | ||
| MODULE_AUTHOR("Peter Griffin <peter.griffin@linaro.org>");
 | ||
| MODULE_LICENSE("GPL");
 |