689b66cb53
This removes the following functions: si_pmu_chipcontrol() => bcma_chipco_chipctl_maskset() si_pmu_regcontrol() => bcma_chipco_regctl_maskset() si_pmu_pllcontrol() => bcma_chipco_pll_maskset() si_pmu_pllupd() => bcma_cc_set32() si_pmu_alp_clock() => bcma_chipco_get_alp_clock() This also removed the sih member from struct shared_phy. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
165 lines
4.3 KiB
C
165 lines
4.3 KiB
C
/*
|
|
* Copyright (c) 2011 Broadcom Corporation
|
|
*
|
|
* Permission to use, copy, modify, and/or distribute this software for any
|
|
* purpose with or without fee is hereby granted, provided that the above
|
|
* copyright notice and this permission notice appear in all copies.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
|
|
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
|
|
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
|
|
* SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
|
|
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
|
|
* OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
|
|
* CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
|
|
*/
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/io.h>
|
|
|
|
#include <brcm_hw_ids.h>
|
|
#include <chipcommon.h>
|
|
#include <brcmu_utils.h>
|
|
#include "pub.h"
|
|
#include "aiutils.h"
|
|
#include "pmu.h"
|
|
#include "soc.h"
|
|
|
|
/*
|
|
* external LPO crystal frequency
|
|
*/
|
|
#define EXT_ILP_HZ 32768
|
|
|
|
/*
|
|
* Duration for ILP clock frequency measurment in milliseconds
|
|
*
|
|
* remark: 1000 must be an integer multiple of this duration
|
|
*/
|
|
#define ILP_CALC_DUR 10
|
|
|
|
/* Fields in pmucontrol */
|
|
#define PCTL_ILP_DIV_MASK 0xffff0000
|
|
#define PCTL_ILP_DIV_SHIFT 16
|
|
#define PCTL_PLL_PLLCTL_UPD 0x00000400 /* rev 2 */
|
|
#define PCTL_NOILP_ON_WAIT 0x00000200 /* rev 1 */
|
|
#define PCTL_HT_REQ_EN 0x00000100
|
|
#define PCTL_ALP_REQ_EN 0x00000080
|
|
#define PCTL_XTALFREQ_MASK 0x0000007c
|
|
#define PCTL_XTALFREQ_SHIFT 2
|
|
#define PCTL_ILP_DIV_EN 0x00000002
|
|
#define PCTL_LPO_SEL 0x00000001
|
|
|
|
/* ILP clock */
|
|
#define ILP_CLOCK 32000
|
|
|
|
/* ALP clock on pre-PMU chips */
|
|
#define ALP_CLOCK 20000000
|
|
|
|
/* pmustatus */
|
|
#define PST_EXTLPOAVAIL 0x0100
|
|
#define PST_WDRESET 0x0080
|
|
#define PST_INTPEND 0x0040
|
|
#define PST_SBCLKST 0x0030
|
|
#define PST_SBCLKST_ILP 0x0010
|
|
#define PST_SBCLKST_ALP 0x0020
|
|
#define PST_SBCLKST_HT 0x0030
|
|
#define PST_ALPAVAIL 0x0008
|
|
#define PST_HTAVAIL 0x0004
|
|
#define PST_RESINIT 0x0003
|
|
|
|
/* PMU resource bit position */
|
|
#define PMURES_BIT(bit) (1 << (bit))
|
|
|
|
/* PMU corerev and chip specific PLL controls.
|
|
* PMU<rev>_PLL<num>_XX where <rev> is PMU corerev and <num> is an arbitrary
|
|
* number to differentiate different PLLs controlled by the same PMU rev.
|
|
*/
|
|
|
|
/* pmu XtalFreqRatio */
|
|
#define PMU_XTALFREQ_REG_ILPCTR_MASK 0x00001FFF
|
|
#define PMU_XTALFREQ_REG_MEASURE_MASK 0x80000000
|
|
#define PMU_XTALFREQ_REG_MEASURE_SHIFT 31
|
|
|
|
/* 4313 resources */
|
|
#define RES4313_BB_PU_RSRC 0
|
|
#define RES4313_ILP_REQ_RSRC 1
|
|
#define RES4313_XTAL_PU_RSRC 2
|
|
#define RES4313_ALP_AVAIL_RSRC 3
|
|
#define RES4313_RADIO_PU_RSRC 4
|
|
#define RES4313_BG_PU_RSRC 5
|
|
#define RES4313_VREG1P4_PU_RSRC 6
|
|
#define RES4313_AFE_PWRSW_RSRC 7
|
|
#define RES4313_RX_PWRSW_RSRC 8
|
|
#define RES4313_TX_PWRSW_RSRC 9
|
|
#define RES4313_BB_PWRSW_RSRC 10
|
|
#define RES4313_SYNTH_PWRSW_RSRC 11
|
|
#define RES4313_MISC_PWRSW_RSRC 12
|
|
#define RES4313_BB_PLL_PWRSW_RSRC 13
|
|
#define RES4313_HT_AVAIL_RSRC 14
|
|
#define RES4313_MACPHY_CLK_AVAIL_RSRC 15
|
|
|
|
u16 si_pmu_fast_pwrup_delay(struct si_pub *sih)
|
|
{
|
|
uint delay = PMU_MAX_TRANSITION_DLY;
|
|
|
|
switch (ai_get_chip_id(sih)) {
|
|
case BCMA_CHIP_ID_BCM43224:
|
|
case BCMA_CHIP_ID_BCM43225:
|
|
case BCMA_CHIP_ID_BCM4313:
|
|
delay = 3700;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
return (u16) delay;
|
|
}
|
|
|
|
u32 si_pmu_measure_alpclk(struct si_pub *sih)
|
|
{
|
|
struct si_info *sii = container_of(sih, struct si_info, pub);
|
|
struct bcma_device *core;
|
|
u32 alp_khz;
|
|
|
|
if (ai_get_pmurev(sih) < 10)
|
|
return 0;
|
|
|
|
/* Remember original core before switch to chipc */
|
|
core = sii->icbus->drv_cc.core;
|
|
|
|
if (bcma_read32(core, CHIPCREGOFFS(pmustatus)) & PST_EXTLPOAVAIL) {
|
|
u32 ilp_ctr, alp_hz;
|
|
|
|
/*
|
|
* Enable the reg to measure the freq,
|
|
* in case it was disabled before
|
|
*/
|
|
bcma_write32(core, CHIPCREGOFFS(pmu_xtalfreq),
|
|
1U << PMU_XTALFREQ_REG_MEASURE_SHIFT);
|
|
|
|
/* Delay for well over 4 ILP clocks */
|
|
udelay(1000);
|
|
|
|
/* Read the latched number of ALP ticks per 4 ILP ticks */
|
|
ilp_ctr = bcma_read32(core, CHIPCREGOFFS(pmu_xtalfreq)) &
|
|
PMU_XTALFREQ_REG_ILPCTR_MASK;
|
|
|
|
/*
|
|
* Turn off the PMU_XTALFREQ_REG_MEASURE_SHIFT
|
|
* bit to save power
|
|
*/
|
|
bcma_write32(core, CHIPCREGOFFS(pmu_xtalfreq), 0);
|
|
|
|
/* Calculate ALP frequency */
|
|
alp_hz = (ilp_ctr * EXT_ILP_HZ) / 4;
|
|
|
|
/*
|
|
* Round to nearest 100KHz, and at
|
|
* the same time convert to KHz
|
|
*/
|
|
alp_khz = (alp_hz + 50000) / 100000 * 100;
|
|
} else
|
|
alp_khz = 0;
|
|
|
|
return alp_khz;
|
|
}
|