 9ef8c877e4
			
		
	
	
	9ef8c877e4
	
	
	
		
			
			The TI55231 appears to be fully compatible to the 5523 model from National Semicondutor. This patch just adds DT bindings for it. Signed-off-by: Daniel Mack <zonque@gmail.com> Acked-by: Milo Kim <milo.kim@ti.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
		
			
				
	
	
		
			839 lines
		
	
	
	
		
			20 KiB
			
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			839 lines
		
	
	
	
		
			20 KiB
			
		
	
	
	
		
			C
		
	
	
	
	
	
| /*
 | |
|  * lp5523.c - LP5523, LP55231 LED Driver
 | |
|  *
 | |
|  * Copyright (C) 2010 Nokia Corporation
 | |
|  * Copyright (C) 2012 Texas Instruments
 | |
|  *
 | |
|  * Contact: Samu Onkalo <samu.p.onkalo@nokia.com>
 | |
|  *          Milo(Woogyom) Kim <milo.kim@ti.com>
 | |
|  *
 | |
|  * This program is free software; you can redistribute it and/or
 | |
|  * modify it under the terms of the GNU General Public License
 | |
|  * version 2 as published by the Free Software Foundation.
 | |
|  *
 | |
|  * This program is distributed in the hope that it will be useful, but
 | |
|  * WITHOUT ANY WARRANTY; without even the implied warranty of
 | |
|  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 | |
|  * General Public License for more details.
 | |
|  *
 | |
|  * You should have received a copy of the GNU General Public License
 | |
|  * along with this program; if not, write to the Free Software
 | |
|  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
 | |
|  * 02110-1301 USA
 | |
|  */
 | |
| 
 | |
| #include <linux/delay.h>
 | |
| #include <linux/firmware.h>
 | |
| #include <linux/i2c.h>
 | |
| #include <linux/leds.h>
 | |
| #include <linux/module.h>
 | |
| #include <linux/mutex.h>
 | |
| #include <linux/of.h>
 | |
| #include <linux/platform_data/leds-lp55xx.h>
 | |
| #include <linux/slab.h>
 | |
| 
 | |
| #include "leds-lp55xx-common.h"
 | |
| 
 | |
| #define LP5523_PROGRAM_LENGTH		32	/* bytes */
 | |
| /* Memory is used like this:
 | |
|    0x00 engine 1 program
 | |
|    0x10 engine 2 program
 | |
|    0x20 engine 3 program
 | |
|    0x30 engine 1 muxing info
 | |
|    0x40 engine 2 muxing info
 | |
|    0x50 engine 3 muxing info
 | |
| */
 | |
| #define LP5523_MAX_LEDS			9
 | |
| 
 | |
| /* Registers */
 | |
| #define LP5523_REG_ENABLE		0x00
 | |
| #define LP5523_REG_OP_MODE		0x01
 | |
| #define LP5523_REG_ENABLE_LEDS_MSB	0x04
 | |
| #define LP5523_REG_ENABLE_LEDS_LSB	0x05
 | |
| #define LP5523_REG_LED_PWM_BASE		0x16
 | |
| #define LP5523_REG_LED_CURRENT_BASE	0x26
 | |
| #define LP5523_REG_CONFIG		0x36
 | |
| #define LP5523_REG_STATUS		0x3A
 | |
| #define LP5523_REG_RESET		0x3D
 | |
| #define LP5523_REG_LED_TEST_CTRL	0x41
 | |
| #define LP5523_REG_LED_TEST_ADC		0x42
 | |
| #define LP5523_REG_CH1_PROG_START	0x4C
 | |
| #define LP5523_REG_CH2_PROG_START	0x4D
 | |
| #define LP5523_REG_CH3_PROG_START	0x4E
 | |
| #define LP5523_REG_PROG_PAGE_SEL	0x4F
 | |
| #define LP5523_REG_PROG_MEM		0x50
 | |
| 
 | |
| /* Bit description in registers */
 | |
| #define LP5523_ENABLE			0x40
 | |
| #define LP5523_AUTO_INC			0x40
 | |
| #define LP5523_PWR_SAVE			0x20
 | |
| #define LP5523_PWM_PWR_SAVE		0x04
 | |
| #define LP5523_CP_AUTO			0x18
 | |
| #define LP5523_AUTO_CLK			0x02
 | |
| 
 | |
| #define LP5523_EN_LEDTEST		0x80
 | |
| #define LP5523_LEDTEST_DONE		0x80
 | |
| #define LP5523_RESET			0xFF
 | |
| #define LP5523_ADC_SHORTCIRC_LIM	80
 | |
| #define LP5523_EXT_CLK_USED		0x08
 | |
| #define LP5523_ENG_STATUS_MASK		0x07
 | |
| 
 | |
| /* Memory Page Selection */
 | |
| #define LP5523_PAGE_ENG1		0
 | |
| #define LP5523_PAGE_ENG2		1
 | |
| #define LP5523_PAGE_ENG3		2
 | |
| #define LP5523_PAGE_MUX1		3
 | |
| #define LP5523_PAGE_MUX2		4
 | |
| #define LP5523_PAGE_MUX3		5
 | |
| 
 | |
| /* Program Memory Operations */
 | |
| #define LP5523_MODE_ENG1_M		0x30	/* Operation Mode Register */
 | |
| #define LP5523_MODE_ENG2_M		0x0C
 | |
| #define LP5523_MODE_ENG3_M		0x03
 | |
| #define LP5523_LOAD_ENG1		0x10
 | |
| #define LP5523_LOAD_ENG2		0x04
 | |
| #define LP5523_LOAD_ENG3		0x01
 | |
| 
 | |
| #define LP5523_ENG1_IS_LOADING(mode)	\
 | |
| 	((mode & LP5523_MODE_ENG1_M) == LP5523_LOAD_ENG1)
 | |
| #define LP5523_ENG2_IS_LOADING(mode)	\
 | |
| 	((mode & LP5523_MODE_ENG2_M) == LP5523_LOAD_ENG2)
 | |
| #define LP5523_ENG3_IS_LOADING(mode)	\
 | |
| 	((mode & LP5523_MODE_ENG3_M) == LP5523_LOAD_ENG3)
 | |
| 
 | |
| #define LP5523_EXEC_ENG1_M		0x30	/* Enable Register */
 | |
| #define LP5523_EXEC_ENG2_M		0x0C
 | |
| #define LP5523_EXEC_ENG3_M		0x03
 | |
| #define LP5523_EXEC_M			0x3F
 | |
| #define LP5523_RUN_ENG1			0x20
 | |
| #define LP5523_RUN_ENG2			0x08
 | |
| #define LP5523_RUN_ENG3			0x02
 | |
| 
 | |
| #define LED_ACTIVE(mux, led)		(!!(mux & (0x0001 << led)))
 | |
| 
 | |
| enum lp5523_chip_id {
 | |
| 	LP5523,
 | |
| 	LP55231,
 | |
| };
 | |
| 
 | |
| static int lp5523_init_program_engine(struct lp55xx_chip *chip);
 | |
| 
 | |
| static inline void lp5523_wait_opmode_done(void)
 | |
| {
 | |
| 	usleep_range(1000, 2000);
 | |
| }
 | |
| 
 | |
| static void lp5523_set_led_current(struct lp55xx_led *led, u8 led_current)
 | |
| {
 | |
| 	led->led_current = led_current;
 | |
| 	lp55xx_write(led->chip, LP5523_REG_LED_CURRENT_BASE + led->chan_nr,
 | |
| 		led_current);
 | |
| }
 | |
| 
 | |
| static int lp5523_post_init_device(struct lp55xx_chip *chip)
 | |
| {
 | |
| 	int ret;
 | |
| 
 | |
| 	ret = lp55xx_write(chip, LP5523_REG_ENABLE, LP5523_ENABLE);
 | |
| 	if (ret)
 | |
| 		return ret;
 | |
| 
 | |
| 	/* Chip startup time is 500 us, 1 - 2 ms gives some margin */
 | |
| 	usleep_range(1000, 2000);
 | |
| 
 | |
| 	ret = lp55xx_write(chip, LP5523_REG_CONFIG,
 | |
| 			    LP5523_AUTO_INC | LP5523_PWR_SAVE |
 | |
| 			    LP5523_CP_AUTO | LP5523_AUTO_CLK |
 | |
| 			    LP5523_PWM_PWR_SAVE);
 | |
| 	if (ret)
 | |
| 		return ret;
 | |
| 
 | |
| 	/* turn on all leds */
 | |
| 	ret = lp55xx_write(chip, LP5523_REG_ENABLE_LEDS_MSB, 0x01);
 | |
| 	if (ret)
 | |
| 		return ret;
 | |
| 
 | |
| 	ret = lp55xx_write(chip, LP5523_REG_ENABLE_LEDS_LSB, 0xff);
 | |
| 	if (ret)
 | |
| 		return ret;
 | |
| 
 | |
| 	return lp5523_init_program_engine(chip);
 | |
| }
 | |
| 
 | |
| static void lp5523_load_engine(struct lp55xx_chip *chip)
 | |
| {
 | |
| 	enum lp55xx_engine_index idx = chip->engine_idx;
 | |
| 	u8 mask[] = {
 | |
| 		[LP55XX_ENGINE_1] = LP5523_MODE_ENG1_M,
 | |
| 		[LP55XX_ENGINE_2] = LP5523_MODE_ENG2_M,
 | |
| 		[LP55XX_ENGINE_3] = LP5523_MODE_ENG3_M,
 | |
| 	};
 | |
| 
 | |
| 	u8 val[] = {
 | |
| 		[LP55XX_ENGINE_1] = LP5523_LOAD_ENG1,
 | |
| 		[LP55XX_ENGINE_2] = LP5523_LOAD_ENG2,
 | |
| 		[LP55XX_ENGINE_3] = LP5523_LOAD_ENG3,
 | |
| 	};
 | |
| 
 | |
| 	lp55xx_update_bits(chip, LP5523_REG_OP_MODE, mask[idx], val[idx]);
 | |
| 
 | |
| 	lp5523_wait_opmode_done();
 | |
| }
 | |
| 
 | |
| static void lp5523_load_engine_and_select_page(struct lp55xx_chip *chip)
 | |
| {
 | |
| 	enum lp55xx_engine_index idx = chip->engine_idx;
 | |
| 	u8 page_sel[] = {
 | |
| 		[LP55XX_ENGINE_1] = LP5523_PAGE_ENG1,
 | |
| 		[LP55XX_ENGINE_2] = LP5523_PAGE_ENG2,
 | |
| 		[LP55XX_ENGINE_3] = LP5523_PAGE_ENG3,
 | |
| 	};
 | |
| 
 | |
| 	lp5523_load_engine(chip);
 | |
| 
 | |
| 	lp55xx_write(chip, LP5523_REG_PROG_PAGE_SEL, page_sel[idx]);
 | |
| }
 | |
| 
 | |
| static void lp5523_stop_all_engines(struct lp55xx_chip *chip)
 | |
| {
 | |
| 	lp55xx_write(chip, LP5523_REG_OP_MODE, 0);
 | |
| 	lp5523_wait_opmode_done();
 | |
| }
 | |
| 
 | |
| static void lp5523_stop_engine(struct lp55xx_chip *chip)
 | |
| {
 | |
| 	enum lp55xx_engine_index idx = chip->engine_idx;
 | |
| 	u8 mask[] = {
 | |
| 		[LP55XX_ENGINE_1] = LP5523_MODE_ENG1_M,
 | |
| 		[LP55XX_ENGINE_2] = LP5523_MODE_ENG2_M,
 | |
| 		[LP55XX_ENGINE_3] = LP5523_MODE_ENG3_M,
 | |
| 	};
 | |
| 
 | |
| 	lp55xx_update_bits(chip, LP5523_REG_OP_MODE, mask[idx], 0);
 | |
| 
 | |
| 	lp5523_wait_opmode_done();
 | |
| }
 | |
| 
 | |
| static void lp5523_turn_off_channels(struct lp55xx_chip *chip)
 | |
| {
 | |
| 	int i;
 | |
| 
 | |
| 	for (i = 0; i < LP5523_MAX_LEDS; i++)
 | |
| 		lp55xx_write(chip, LP5523_REG_LED_PWM_BASE + i, 0);
 | |
| }
 | |
| 
 | |
| static void lp5523_run_engine(struct lp55xx_chip *chip, bool start)
 | |
| {
 | |
| 	int ret;
 | |
| 	u8 mode;
 | |
| 	u8 exec;
 | |
| 
 | |
| 	/* stop engine */
 | |
| 	if (!start) {
 | |
| 		lp5523_stop_engine(chip);
 | |
| 		lp5523_turn_off_channels(chip);
 | |
| 		return;
 | |
| 	}
 | |
| 
 | |
| 	/*
 | |
| 	 * To run the engine,
 | |
| 	 * operation mode and enable register should updated at the same time
 | |
| 	 */
 | |
| 
 | |
| 	ret = lp55xx_read(chip, LP5523_REG_OP_MODE, &mode);
 | |
| 	if (ret)
 | |
| 		return;
 | |
| 
 | |
| 	ret = lp55xx_read(chip, LP5523_REG_ENABLE, &exec);
 | |
| 	if (ret)
 | |
| 		return;
 | |
| 
 | |
| 	/* change operation mode to RUN only when each engine is loading */
 | |
| 	if (LP5523_ENG1_IS_LOADING(mode)) {
 | |
| 		mode = (mode & ~LP5523_MODE_ENG1_M) | LP5523_RUN_ENG1;
 | |
| 		exec = (exec & ~LP5523_EXEC_ENG1_M) | LP5523_RUN_ENG1;
 | |
| 	}
 | |
| 
 | |
| 	if (LP5523_ENG2_IS_LOADING(mode)) {
 | |
| 		mode = (mode & ~LP5523_MODE_ENG2_M) | LP5523_RUN_ENG2;
 | |
| 		exec = (exec & ~LP5523_EXEC_ENG2_M) | LP5523_RUN_ENG2;
 | |
| 	}
 | |
| 
 | |
| 	if (LP5523_ENG3_IS_LOADING(mode)) {
 | |
| 		mode = (mode & ~LP5523_MODE_ENG3_M) | LP5523_RUN_ENG3;
 | |
| 		exec = (exec & ~LP5523_EXEC_ENG3_M) | LP5523_RUN_ENG3;
 | |
| 	}
 | |
| 
 | |
| 	lp55xx_write(chip, LP5523_REG_OP_MODE, mode);
 | |
| 	lp5523_wait_opmode_done();
 | |
| 
 | |
| 	lp55xx_update_bits(chip, LP5523_REG_ENABLE, LP5523_EXEC_M, exec);
 | |
| }
 | |
| 
 | |
| static int lp5523_init_program_engine(struct lp55xx_chip *chip)
 | |
| {
 | |
| 	int i;
 | |
| 	int j;
 | |
| 	int ret;
 | |
| 	u8 status;
 | |
| 	/* one pattern per engine setting LED MUX start and stop addresses */
 | |
| 	static const u8 pattern[][LP5523_PROGRAM_LENGTH] =  {
 | |
| 		{ 0x9c, 0x30, 0x9c, 0xb0, 0x9d, 0x80, 0xd8, 0x00, 0},
 | |
| 		{ 0x9c, 0x40, 0x9c, 0xc0, 0x9d, 0x80, 0xd8, 0x00, 0},
 | |
| 		{ 0x9c, 0x50, 0x9c, 0xd0, 0x9d, 0x80, 0xd8, 0x00, 0},
 | |
| 	};
 | |
| 
 | |
| 	/* hardcode 32 bytes of memory for each engine from program memory */
 | |
| 	ret = lp55xx_write(chip, LP5523_REG_CH1_PROG_START, 0x00);
 | |
| 	if (ret)
 | |
| 		return ret;
 | |
| 
 | |
| 	ret = lp55xx_write(chip, LP5523_REG_CH2_PROG_START, 0x10);
 | |
| 	if (ret)
 | |
| 		return ret;
 | |
| 
 | |
| 	ret = lp55xx_write(chip, LP5523_REG_CH3_PROG_START, 0x20);
 | |
| 	if (ret)
 | |
| 		return ret;
 | |
| 
 | |
| 	/* write LED MUX address space for each engine */
 | |
| 	for (i = LP55XX_ENGINE_1; i <= LP55XX_ENGINE_3; i++) {
 | |
| 		chip->engine_idx = i;
 | |
| 		lp5523_load_engine_and_select_page(chip);
 | |
| 
 | |
| 		for (j = 0; j < LP5523_PROGRAM_LENGTH; j++) {
 | |
| 			ret = lp55xx_write(chip, LP5523_REG_PROG_MEM + j,
 | |
| 					pattern[i - 1][j]);
 | |
| 			if (ret)
 | |
| 				goto out;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	lp5523_run_engine(chip, true);
 | |
| 
 | |
| 	/* Let the programs run for couple of ms and check the engine status */
 | |
| 	usleep_range(3000, 6000);
 | |
| 	lp55xx_read(chip, LP5523_REG_STATUS, &status);
 | |
| 	status &= LP5523_ENG_STATUS_MASK;
 | |
| 
 | |
| 	if (status != LP5523_ENG_STATUS_MASK) {
 | |
| 		dev_err(&chip->cl->dev,
 | |
| 			"cound not configure LED engine, status = 0x%.2x\n",
 | |
| 			status);
 | |
| 		ret = -1;
 | |
| 	}
 | |
| 
 | |
| out:
 | |
| 	lp5523_stop_all_engines(chip);
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| static int lp5523_update_program_memory(struct lp55xx_chip *chip,
 | |
| 					const u8 *data, size_t size)
 | |
| {
 | |
| 	u8 pattern[LP5523_PROGRAM_LENGTH] = {0};
 | |
| 	unsigned cmd;
 | |
| 	char c[3];
 | |
| 	int nrchars;
 | |
| 	int ret;
 | |
| 	int offset = 0;
 | |
| 	int i = 0;
 | |
| 
 | |
| 	while ((offset < size - 1) && (i < LP5523_PROGRAM_LENGTH)) {
 | |
| 		/* separate sscanfs because length is working only for %s */
 | |
| 		ret = sscanf(data + offset, "%2s%n ", c, &nrchars);
 | |
| 		if (ret != 1)
 | |
| 			goto err;
 | |
| 
 | |
| 		ret = sscanf(c, "%2x", &cmd);
 | |
| 		if (ret != 1)
 | |
| 			goto err;
 | |
| 
 | |
| 		pattern[i] = (u8)cmd;
 | |
| 		offset += nrchars;
 | |
| 		i++;
 | |
| 	}
 | |
| 
 | |
| 	/* Each instruction is 16bit long. Check that length is even */
 | |
| 	if (i % 2)
 | |
| 		goto err;
 | |
| 
 | |
| 	for (i = 0; i < LP5523_PROGRAM_LENGTH; i++) {
 | |
| 		ret = lp55xx_write(chip, LP5523_REG_PROG_MEM + i, pattern[i]);
 | |
| 		if (ret)
 | |
| 			return -EINVAL;
 | |
| 	}
 | |
| 
 | |
| 	return size;
 | |
| 
 | |
| err:
 | |
| 	dev_err(&chip->cl->dev, "wrong pattern format\n");
 | |
| 	return -EINVAL;
 | |
| }
 | |
| 
 | |
| static void lp5523_firmware_loaded(struct lp55xx_chip *chip)
 | |
| {
 | |
| 	const struct firmware *fw = chip->fw;
 | |
| 
 | |
| 	if (fw->size > LP5523_PROGRAM_LENGTH) {
 | |
| 		dev_err(&chip->cl->dev, "firmware data size overflow: %zu\n",
 | |
| 			fw->size);
 | |
| 		return;
 | |
| 	}
 | |
| 
 | |
| 	/*
 | |
| 	 * Program momery sequence
 | |
| 	 *  1) set engine mode to "LOAD"
 | |
| 	 *  2) write firmware data into program memory
 | |
| 	 */
 | |
| 
 | |
| 	lp5523_load_engine_and_select_page(chip);
 | |
| 	lp5523_update_program_memory(chip, fw->data, fw->size);
 | |
| }
 | |
| 
 | |
| static ssize_t show_engine_mode(struct device *dev,
 | |
| 				struct device_attribute *attr,
 | |
| 				char *buf, int nr)
 | |
| {
 | |
| 	struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev));
 | |
| 	struct lp55xx_chip *chip = led->chip;
 | |
| 	enum lp55xx_engine_mode mode = chip->engines[nr - 1].mode;
 | |
| 
 | |
| 	switch (mode) {
 | |
| 	case LP55XX_ENGINE_RUN:
 | |
| 		return sprintf(buf, "run\n");
 | |
| 	case LP55XX_ENGINE_LOAD:
 | |
| 		return sprintf(buf, "load\n");
 | |
| 	case LP55XX_ENGINE_DISABLED:
 | |
| 	default:
 | |
| 		return sprintf(buf, "disabled\n");
 | |
| 	}
 | |
| }
 | |
| show_mode(1)
 | |
| show_mode(2)
 | |
| show_mode(3)
 | |
| 
 | |
| static ssize_t store_engine_mode(struct device *dev,
 | |
| 				 struct device_attribute *attr,
 | |
| 				 const char *buf, size_t len, int nr)
 | |
| {
 | |
| 	struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev));
 | |
| 	struct lp55xx_chip *chip = led->chip;
 | |
| 	struct lp55xx_engine *engine = &chip->engines[nr - 1];
 | |
| 
 | |
| 	mutex_lock(&chip->lock);
 | |
| 
 | |
| 	chip->engine_idx = nr;
 | |
| 
 | |
| 	if (!strncmp(buf, "run", 3)) {
 | |
| 		lp5523_run_engine(chip, true);
 | |
| 		engine->mode = LP55XX_ENGINE_RUN;
 | |
| 	} else if (!strncmp(buf, "load", 4)) {
 | |
| 		lp5523_stop_engine(chip);
 | |
| 		lp5523_load_engine(chip);
 | |
| 		engine->mode = LP55XX_ENGINE_LOAD;
 | |
| 	} else if (!strncmp(buf, "disabled", 8)) {
 | |
| 		lp5523_stop_engine(chip);
 | |
| 		engine->mode = LP55XX_ENGINE_DISABLED;
 | |
| 	}
 | |
| 
 | |
| 	mutex_unlock(&chip->lock);
 | |
| 
 | |
| 	return len;
 | |
| }
 | |
| store_mode(1)
 | |
| store_mode(2)
 | |
| store_mode(3)
 | |
| 
 | |
| static int lp5523_mux_parse(const char *buf, u16 *mux, size_t len)
 | |
| {
 | |
| 	u16 tmp_mux = 0;
 | |
| 	int i;
 | |
| 
 | |
| 	len = min_t(int, len, LP5523_MAX_LEDS);
 | |
| 
 | |
| 	for (i = 0; i < len; i++) {
 | |
| 		switch (buf[i]) {
 | |
| 		case '1':
 | |
| 			tmp_mux |= (1 << i);
 | |
| 			break;
 | |
| 		case '0':
 | |
| 			break;
 | |
| 		case '\n':
 | |
| 			i = len;
 | |
| 			break;
 | |
| 		default:
 | |
| 			return -1;
 | |
| 		}
 | |
| 	}
 | |
| 	*mux = tmp_mux;
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static void lp5523_mux_to_array(u16 led_mux, char *array)
 | |
| {
 | |
| 	int i, pos = 0;
 | |
| 	for (i = 0; i < LP5523_MAX_LEDS; i++)
 | |
| 		pos += sprintf(array + pos, "%x", LED_ACTIVE(led_mux, i));
 | |
| 
 | |
| 	array[pos] = '\0';
 | |
| }
 | |
| 
 | |
| static ssize_t show_engine_leds(struct device *dev,
 | |
| 			    struct device_attribute *attr,
 | |
| 			    char *buf, int nr)
 | |
| {
 | |
| 	struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev));
 | |
| 	struct lp55xx_chip *chip = led->chip;
 | |
| 	char mux[LP5523_MAX_LEDS + 1];
 | |
| 
 | |
| 	lp5523_mux_to_array(chip->engines[nr - 1].led_mux, mux);
 | |
| 
 | |
| 	return sprintf(buf, "%s\n", mux);
 | |
| }
 | |
| show_leds(1)
 | |
| show_leds(2)
 | |
| show_leds(3)
 | |
| 
 | |
| static int lp5523_load_mux(struct lp55xx_chip *chip, u16 mux, int nr)
 | |
| {
 | |
| 	struct lp55xx_engine *engine = &chip->engines[nr - 1];
 | |
| 	int ret;
 | |
| 	u8 mux_page[] = {
 | |
| 		[LP55XX_ENGINE_1] = LP5523_PAGE_MUX1,
 | |
| 		[LP55XX_ENGINE_2] = LP5523_PAGE_MUX2,
 | |
| 		[LP55XX_ENGINE_3] = LP5523_PAGE_MUX3,
 | |
| 	};
 | |
| 
 | |
| 	lp5523_load_engine(chip);
 | |
| 
 | |
| 	ret = lp55xx_write(chip, LP5523_REG_PROG_PAGE_SEL, mux_page[nr]);
 | |
| 	if (ret)
 | |
| 		return ret;
 | |
| 
 | |
| 	ret = lp55xx_write(chip, LP5523_REG_PROG_MEM , (u8)(mux >> 8));
 | |
| 	if (ret)
 | |
| 		return ret;
 | |
| 
 | |
| 	ret = lp55xx_write(chip, LP5523_REG_PROG_MEM + 1, (u8)(mux));
 | |
| 	if (ret)
 | |
| 		return ret;
 | |
| 
 | |
| 	engine->led_mux = mux;
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static ssize_t store_engine_leds(struct device *dev,
 | |
| 			     struct device_attribute *attr,
 | |
| 			     const char *buf, size_t len, int nr)
 | |
| {
 | |
| 	struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev));
 | |
| 	struct lp55xx_chip *chip = led->chip;
 | |
| 	struct lp55xx_engine *engine = &chip->engines[nr - 1];
 | |
| 	u16 mux = 0;
 | |
| 	ssize_t ret;
 | |
| 
 | |
| 	if (lp5523_mux_parse(buf, &mux, len))
 | |
| 		return -EINVAL;
 | |
| 
 | |
| 	mutex_lock(&chip->lock);
 | |
| 
 | |
| 	chip->engine_idx = nr;
 | |
| 	ret = -EINVAL;
 | |
| 
 | |
| 	if (engine->mode != LP55XX_ENGINE_LOAD)
 | |
| 		goto leave;
 | |
| 
 | |
| 	if (lp5523_load_mux(chip, mux, nr))
 | |
| 		goto leave;
 | |
| 
 | |
| 	ret = len;
 | |
| leave:
 | |
| 	mutex_unlock(&chip->lock);
 | |
| 	return ret;
 | |
| }
 | |
| store_leds(1)
 | |
| store_leds(2)
 | |
| store_leds(3)
 | |
| 
 | |
| static ssize_t store_engine_load(struct device *dev,
 | |
| 			     struct device_attribute *attr,
 | |
| 			     const char *buf, size_t len, int nr)
 | |
| {
 | |
| 	struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev));
 | |
| 	struct lp55xx_chip *chip = led->chip;
 | |
| 	int ret;
 | |
| 
 | |
| 	mutex_lock(&chip->lock);
 | |
| 
 | |
| 	chip->engine_idx = nr;
 | |
| 	lp5523_load_engine_and_select_page(chip);
 | |
| 	ret = lp5523_update_program_memory(chip, buf, len);
 | |
| 
 | |
| 	mutex_unlock(&chip->lock);
 | |
| 
 | |
| 	return ret;
 | |
| }
 | |
| store_load(1)
 | |
| store_load(2)
 | |
| store_load(3)
 | |
| 
 | |
| static ssize_t lp5523_selftest(struct device *dev,
 | |
| 			       struct device_attribute *attr,
 | |
| 			       char *buf)
 | |
| {
 | |
| 	struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev));
 | |
| 	struct lp55xx_chip *chip = led->chip;
 | |
| 	struct lp55xx_platform_data *pdata = chip->pdata;
 | |
| 	int i, ret, pos = 0;
 | |
| 	u8 status, adc, vdd;
 | |
| 
 | |
| 	mutex_lock(&chip->lock);
 | |
| 
 | |
| 	ret = lp55xx_read(chip, LP5523_REG_STATUS, &status);
 | |
| 	if (ret < 0)
 | |
| 		goto fail;
 | |
| 
 | |
| 	/* Check that ext clock is really in use if requested */
 | |
| 	if (pdata->clock_mode == LP55XX_CLOCK_EXT) {
 | |
| 		if  ((status & LP5523_EXT_CLK_USED) == 0)
 | |
| 			goto fail;
 | |
| 	}
 | |
| 
 | |
| 	/* Measure VDD (i.e. VBAT) first (channel 16 corresponds to VDD) */
 | |
| 	lp55xx_write(chip, LP5523_REG_LED_TEST_CTRL, LP5523_EN_LEDTEST | 16);
 | |
| 	usleep_range(3000, 6000); /* ADC conversion time is typically 2.7 ms */
 | |
| 	ret = lp55xx_read(chip, LP5523_REG_STATUS, &status);
 | |
| 	if (ret < 0)
 | |
| 		goto fail;
 | |
| 
 | |
| 	if (!(status & LP5523_LEDTEST_DONE))
 | |
| 		usleep_range(3000, 6000); /* Was not ready. Wait little bit */
 | |
| 
 | |
| 	ret = lp55xx_read(chip, LP5523_REG_LED_TEST_ADC, &vdd);
 | |
| 	if (ret < 0)
 | |
| 		goto fail;
 | |
| 
 | |
| 	vdd--;	/* There may be some fluctuation in measurement */
 | |
| 
 | |
| 	for (i = 0; i < LP5523_MAX_LEDS; i++) {
 | |
| 		/* Skip non-existing channels */
 | |
| 		if (pdata->led_config[i].led_current == 0)
 | |
| 			continue;
 | |
| 
 | |
| 		/* Set default current */
 | |
| 		lp55xx_write(chip, LP5523_REG_LED_CURRENT_BASE + i,
 | |
| 			pdata->led_config[i].led_current);
 | |
| 
 | |
| 		lp55xx_write(chip, LP5523_REG_LED_PWM_BASE + i, 0xff);
 | |
| 		/* let current stabilize 2 - 4ms before measurements start */
 | |
| 		usleep_range(2000, 4000);
 | |
| 		lp55xx_write(chip, LP5523_REG_LED_TEST_CTRL,
 | |
| 			     LP5523_EN_LEDTEST | i);
 | |
| 		/* ADC conversion time is 2.7 ms typically */
 | |
| 		usleep_range(3000, 6000);
 | |
| 		ret = lp55xx_read(chip, LP5523_REG_STATUS, &status);
 | |
| 		if (ret < 0)
 | |
| 			goto fail;
 | |
| 
 | |
| 		if (!(status & LP5523_LEDTEST_DONE))
 | |
| 			usleep_range(3000, 6000);/* Was not ready. Wait. */
 | |
| 
 | |
| 		ret = lp55xx_read(chip, LP5523_REG_LED_TEST_ADC, &adc);
 | |
| 		if (ret < 0)
 | |
| 			goto fail;
 | |
| 
 | |
| 		if (adc >= vdd || adc < LP5523_ADC_SHORTCIRC_LIM)
 | |
| 			pos += sprintf(buf + pos, "LED %d FAIL\n", i);
 | |
| 
 | |
| 		lp55xx_write(chip, LP5523_REG_LED_PWM_BASE + i, 0x00);
 | |
| 
 | |
| 		/* Restore current */
 | |
| 		lp55xx_write(chip, LP5523_REG_LED_CURRENT_BASE + i,
 | |
| 			led->led_current);
 | |
| 		led++;
 | |
| 	}
 | |
| 	if (pos == 0)
 | |
| 		pos = sprintf(buf, "OK\n");
 | |
| 	goto release_lock;
 | |
| fail:
 | |
| 	pos = sprintf(buf, "FAIL\n");
 | |
| 
 | |
| release_lock:
 | |
| 	mutex_unlock(&chip->lock);
 | |
| 
 | |
| 	return pos;
 | |
| }
 | |
| 
 | |
| static void lp5523_led_brightness_work(struct work_struct *work)
 | |
| {
 | |
| 	struct lp55xx_led *led = container_of(work, struct lp55xx_led,
 | |
| 					      brightness_work);
 | |
| 	struct lp55xx_chip *chip = led->chip;
 | |
| 
 | |
| 	mutex_lock(&chip->lock);
 | |
| 	lp55xx_write(chip, LP5523_REG_LED_PWM_BASE + led->chan_nr,
 | |
| 		     led->brightness);
 | |
| 	mutex_unlock(&chip->lock);
 | |
| }
 | |
| 
 | |
| static LP55XX_DEV_ATTR_RW(engine1_mode, show_engine1_mode, store_engine1_mode);
 | |
| static LP55XX_DEV_ATTR_RW(engine2_mode, show_engine2_mode, store_engine2_mode);
 | |
| static LP55XX_DEV_ATTR_RW(engine3_mode, show_engine3_mode, store_engine3_mode);
 | |
| static LP55XX_DEV_ATTR_RW(engine1_leds, show_engine1_leds, store_engine1_leds);
 | |
| static LP55XX_DEV_ATTR_RW(engine2_leds, show_engine2_leds, store_engine2_leds);
 | |
| static LP55XX_DEV_ATTR_RW(engine3_leds, show_engine3_leds, store_engine3_leds);
 | |
| static LP55XX_DEV_ATTR_WO(engine1_load, store_engine1_load);
 | |
| static LP55XX_DEV_ATTR_WO(engine2_load, store_engine2_load);
 | |
| static LP55XX_DEV_ATTR_WO(engine3_load, store_engine3_load);
 | |
| static LP55XX_DEV_ATTR_RO(selftest, lp5523_selftest);
 | |
| 
 | |
| static struct attribute *lp5523_attributes[] = {
 | |
| 	&dev_attr_engine1_mode.attr,
 | |
| 	&dev_attr_engine2_mode.attr,
 | |
| 	&dev_attr_engine3_mode.attr,
 | |
| 	&dev_attr_engine1_load.attr,
 | |
| 	&dev_attr_engine2_load.attr,
 | |
| 	&dev_attr_engine3_load.attr,
 | |
| 	&dev_attr_engine1_leds.attr,
 | |
| 	&dev_attr_engine2_leds.attr,
 | |
| 	&dev_attr_engine3_leds.attr,
 | |
| 	&dev_attr_selftest.attr,
 | |
| 	NULL,
 | |
| };
 | |
| 
 | |
| static const struct attribute_group lp5523_group = {
 | |
| 	.attrs = lp5523_attributes,
 | |
| };
 | |
| 
 | |
| /* Chip specific configurations */
 | |
| static struct lp55xx_device_config lp5523_cfg = {
 | |
| 	.reset = {
 | |
| 		.addr = LP5523_REG_RESET,
 | |
| 		.val  = LP5523_RESET,
 | |
| 	},
 | |
| 	.enable = {
 | |
| 		.addr = LP5523_REG_ENABLE,
 | |
| 		.val  = LP5523_ENABLE,
 | |
| 	},
 | |
| 	.max_channel  = LP5523_MAX_LEDS,
 | |
| 	.post_init_device   = lp5523_post_init_device,
 | |
| 	.brightness_work_fn = lp5523_led_brightness_work,
 | |
| 	.set_led_current    = lp5523_set_led_current,
 | |
| 	.firmware_cb        = lp5523_firmware_loaded,
 | |
| 	.run_engine         = lp5523_run_engine,
 | |
| 	.dev_attr_group     = &lp5523_group,
 | |
| };
 | |
| 
 | |
| static int lp5523_probe(struct i2c_client *client,
 | |
| 			const struct i2c_device_id *id)
 | |
| {
 | |
| 	int ret;
 | |
| 	struct lp55xx_chip *chip;
 | |
| 	struct lp55xx_led *led;
 | |
| 	struct lp55xx_platform_data *pdata;
 | |
| 	struct device_node *np = client->dev.of_node;
 | |
| 
 | |
| 	if (!dev_get_platdata(&client->dev)) {
 | |
| 		if (np) {
 | |
| 			ret = lp55xx_of_populate_pdata(&client->dev, np);
 | |
| 			if (ret < 0)
 | |
| 				return ret;
 | |
| 		} else {
 | |
| 			dev_err(&client->dev, "no platform data\n");
 | |
| 			return -EINVAL;
 | |
| 		}
 | |
| 	}
 | |
| 	pdata = dev_get_platdata(&client->dev);
 | |
| 
 | |
| 	chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL);
 | |
| 	if (!chip)
 | |
| 		return -ENOMEM;
 | |
| 
 | |
| 	led = devm_kzalloc(&client->dev,
 | |
| 			sizeof(*led) * pdata->num_channels, GFP_KERNEL);
 | |
| 	if (!led)
 | |
| 		return -ENOMEM;
 | |
| 
 | |
| 	chip->cl = client;
 | |
| 	chip->pdata = pdata;
 | |
| 	chip->cfg = &lp5523_cfg;
 | |
| 
 | |
| 	mutex_init(&chip->lock);
 | |
| 
 | |
| 	i2c_set_clientdata(client, led);
 | |
| 
 | |
| 	ret = lp55xx_init_device(chip);
 | |
| 	if (ret)
 | |
| 		goto err_init;
 | |
| 
 | |
| 	dev_info(&client->dev, "%s Programmable led chip found\n", id->name);
 | |
| 
 | |
| 	ret = lp55xx_register_leds(led, chip);
 | |
| 	if (ret)
 | |
| 		goto err_register_leds;
 | |
| 
 | |
| 	ret = lp55xx_register_sysfs(chip);
 | |
| 	if (ret) {
 | |
| 		dev_err(&client->dev, "registering sysfs failed\n");
 | |
| 		goto err_register_sysfs;
 | |
| 	}
 | |
| 
 | |
| 	return 0;
 | |
| 
 | |
| err_register_sysfs:
 | |
| 	lp55xx_unregister_leds(led, chip);
 | |
| err_register_leds:
 | |
| 	lp55xx_deinit_device(chip);
 | |
| err_init:
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| static int lp5523_remove(struct i2c_client *client)
 | |
| {
 | |
| 	struct lp55xx_led *led = i2c_get_clientdata(client);
 | |
| 	struct lp55xx_chip *chip = led->chip;
 | |
| 
 | |
| 	lp5523_stop_all_engines(chip);
 | |
| 	lp55xx_unregister_sysfs(chip);
 | |
| 	lp55xx_unregister_leds(led, chip);
 | |
| 	lp55xx_deinit_device(chip);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static const struct i2c_device_id lp5523_id[] = {
 | |
| 	{ "lp5523",  LP5523 },
 | |
| 	{ "lp55231", LP55231 },
 | |
| 	{ }
 | |
| };
 | |
| 
 | |
| MODULE_DEVICE_TABLE(i2c, lp5523_id);
 | |
| 
 | |
| #ifdef CONFIG_OF
 | |
| static const struct of_device_id of_lp5523_leds_match[] = {
 | |
| 	{ .compatible = "national,lp5523", },
 | |
| 	{ .compatible = "ti,lp55231", },
 | |
| 	{},
 | |
| };
 | |
| 
 | |
| MODULE_DEVICE_TABLE(of, of_lp5523_leds_match);
 | |
| #endif
 | |
| 
 | |
| static struct i2c_driver lp5523_driver = {
 | |
| 	.driver = {
 | |
| 		.name	= "lp5523x",
 | |
| 		.of_match_table = of_match_ptr(of_lp5523_leds_match),
 | |
| 	},
 | |
| 	.probe		= lp5523_probe,
 | |
| 	.remove		= lp5523_remove,
 | |
| 	.id_table	= lp5523_id,
 | |
| };
 | |
| 
 | |
| module_i2c_driver(lp5523_driver);
 | |
| 
 | |
| MODULE_AUTHOR("Mathias Nyman <mathias.nyman@nokia.com>");
 | |
| MODULE_AUTHOR("Milo Kim <milo.kim@ti.com>");
 | |
| MODULE_DESCRIPTION("LP5523 LED engine");
 | |
| MODULE_LICENSE("GPL");
 |