 a11c5c9ef6
			
		
	
	
	a11c5c9ef6
	
	
	
		
			
			Miscellaneous
     - Remove DEFINE_PCI_DEVICE_TABLE macro use (Benoit Taine)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJT7PyAAAoJEFmIoMA60/r8kjQQALr/8oEfZoVcjgCb7waWOr25
 hUTnrI6GBIAh/50hoBiPq0ouPCAKVv66+CUhuhFkLP7oJz+rMU0B9hfUvdLfmCpH
 7ppaallkllT9nPFIr7h5RUWLXsoQyuHmCYmSrUCcnlT2LPgU0dN72YWElLisEM6Z
 Pldg3933xyIQaCWviHjGEjWb7NvC+JY4pTkV5iyqGgU8Ale/eFYtLLSfdBEjIbGv
 VDirYZmKELYeuncZPrTAsp4IENRMZn702wwDakMSODVMEWtJB5h4yrBawqQDlFP5
 9ztIX6n9p9zkdVKbYZlx/Xwv6SYEnYXLxauVQMSO3Nck7Z10R5Ud+5uuCg/6mWH8
 AQI4UV5bbJcg7zHgocTG9XLFLFPoPtD2JT6k6UT1LeUAiAOqcSzhRO+/qJBmJOWZ
 Zv+EHXPlxBrl0zNifut6ZQrY17teuItVtmha70a/9W3PjnIx3KecqLcTwdTvDsOY
 IAyH8WMZrBKpPpsczSmfE93i2Z1QRS91HEAOeSMxl/98dcDTdllYZS7spjoDll2f
 xmpGDbpriLSCu2XsGHfTC9RbqA7CyuFlHggJSQDkT/5Esli0sCs7eweTuK3RVvPu
 t6bUHK3yElb6x9qMZhb5q6l72wSMlGMishTdaxEHmqrEA8PtaIFodmVX2T/Zel5n
 GHN6bysPqDItNR2v/3JX
 =jJGu
 -----END PGP SIGNATURE-----
Merge tag 'pci-v3.17-changes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull DEFINE_PCI_DEVICE_TABLE removal from Bjorn Helgaas:
 "Part two of the PCI changes for v3.17:
    - Remove DEFINE_PCI_DEVICE_TABLE macro use (Benoit Taine)
  It's a mechanical change that removes uses of the
  DEFINE_PCI_DEVICE_TABLE macro.  I waited until later in the merge
  window to reduce conflicts, but it's possible you'll still see a few"
* tag 'pci-v3.17-changes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  PCI: Remove DEFINE_PCI_DEVICE_TABLE macro use
		
	
			
		
			
				
	
	
		
			9469 lines
		
	
	
	
		
			254 KiB
			
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			9469 lines
		
	
	
	
		
			254 KiB
			
		
	
	
	
		
			C
		
	
	
	
	
	
| /*******************************************************************************
 | |
|  *
 | |
|  * Intel Ethernet Controller XL710 Family Linux Driver
 | |
|  * Copyright(c) 2013 - 2014 Intel Corporation.
 | |
|  *
 | |
|  * This program is free software; you can redistribute it and/or modify it
 | |
|  * under the terms and conditions of the GNU General Public License,
 | |
|  * version 2, as published by the Free Software Foundation.
 | |
|  *
 | |
|  * This program is distributed in the hope it will be useful, but WITHOUT
 | |
|  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
 | |
|  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
 | |
|  * more details.
 | |
|  *
 | |
|  * You should have received a copy of the GNU General Public License along
 | |
|  * with this program.  If not, see <http://www.gnu.org/licenses/>.
 | |
|  *
 | |
|  * The full GNU General Public License is included in this distribution in
 | |
|  * the file called "COPYING".
 | |
|  *
 | |
|  * Contact Information:
 | |
|  * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
 | |
|  * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
 | |
|  *
 | |
|  ******************************************************************************/
 | |
| 
 | |
| /* Local includes */
 | |
| #include "i40e.h"
 | |
| #include "i40e_diag.h"
 | |
| #ifdef CONFIG_I40E_VXLAN
 | |
| #include <net/vxlan.h>
 | |
| #endif
 | |
| 
 | |
| const char i40e_driver_name[] = "i40e";
 | |
| static const char i40e_driver_string[] =
 | |
| 			"Intel(R) Ethernet Connection XL710 Network Driver";
 | |
| 
 | |
| #define DRV_KERN "-k"
 | |
| 
 | |
| #define DRV_VERSION_MAJOR 0
 | |
| #define DRV_VERSION_MINOR 4
 | |
| #define DRV_VERSION_BUILD 21
 | |
| #define DRV_VERSION __stringify(DRV_VERSION_MAJOR) "." \
 | |
| 	     __stringify(DRV_VERSION_MINOR) "." \
 | |
| 	     __stringify(DRV_VERSION_BUILD)    DRV_KERN
 | |
| const char i40e_driver_version_str[] = DRV_VERSION;
 | |
| static const char i40e_copyright[] = "Copyright (c) 2013 - 2014 Intel Corporation.";
 | |
| 
 | |
| /* a bit of forward declarations */
 | |
| static void i40e_vsi_reinit_locked(struct i40e_vsi *vsi);
 | |
| static void i40e_handle_reset_warning(struct i40e_pf *pf);
 | |
| static int i40e_add_vsi(struct i40e_vsi *vsi);
 | |
| static int i40e_add_veb(struct i40e_veb *veb, struct i40e_vsi *vsi);
 | |
| static int i40e_setup_pf_switch(struct i40e_pf *pf, bool reinit);
 | |
| static int i40e_setup_misc_vector(struct i40e_pf *pf);
 | |
| static void i40e_determine_queue_usage(struct i40e_pf *pf);
 | |
| static int i40e_setup_pf_filter_control(struct i40e_pf *pf);
 | |
| static void i40e_fdir_sb_setup(struct i40e_pf *pf);
 | |
| static int i40e_veb_get_bw_info(struct i40e_veb *veb);
 | |
| 
 | |
| /* i40e_pci_tbl - PCI Device ID Table
 | |
|  *
 | |
|  * Last entry must be all 0s
 | |
|  *
 | |
|  * { Vendor ID, Device ID, SubVendor ID, SubDevice ID,
 | |
|  *   Class, Class Mask, private data (not used) }
 | |
|  */
 | |
| static const struct pci_device_id i40e_pci_tbl[] = {
 | |
| 	{PCI_VDEVICE(INTEL, I40E_DEV_ID_SFP_XL710), 0},
 | |
| 	{PCI_VDEVICE(INTEL, I40E_DEV_ID_QEMU), 0},
 | |
| 	{PCI_VDEVICE(INTEL, I40E_DEV_ID_KX_A), 0},
 | |
| 	{PCI_VDEVICE(INTEL, I40E_DEV_ID_KX_B), 0},
 | |
| 	{PCI_VDEVICE(INTEL, I40E_DEV_ID_KX_C), 0},
 | |
| 	{PCI_VDEVICE(INTEL, I40E_DEV_ID_QSFP_A), 0},
 | |
| 	{PCI_VDEVICE(INTEL, I40E_DEV_ID_QSFP_B), 0},
 | |
| 	{PCI_VDEVICE(INTEL, I40E_DEV_ID_QSFP_C), 0},
 | |
| 	/* required last entry */
 | |
| 	{0, }
 | |
| };
 | |
| MODULE_DEVICE_TABLE(pci, i40e_pci_tbl);
 | |
| 
 | |
| #define I40E_MAX_VF_COUNT 128
 | |
| static int debug = -1;
 | |
| module_param(debug, int, 0);
 | |
| MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)");
 | |
| 
 | |
| MODULE_AUTHOR("Intel Corporation, <e1000-devel@lists.sourceforge.net>");
 | |
| MODULE_DESCRIPTION("Intel(R) Ethernet Connection XL710 Network Driver");
 | |
| MODULE_LICENSE("GPL");
 | |
| MODULE_VERSION(DRV_VERSION);
 | |
| 
 | |
| /**
 | |
|  * i40e_allocate_dma_mem_d - OS specific memory alloc for shared code
 | |
|  * @hw:   pointer to the HW structure
 | |
|  * @mem:  ptr to mem struct to fill out
 | |
|  * @size: size of memory requested
 | |
|  * @alignment: what to align the allocation to
 | |
|  **/
 | |
| int i40e_allocate_dma_mem_d(struct i40e_hw *hw, struct i40e_dma_mem *mem,
 | |
| 			    u64 size, u32 alignment)
 | |
| {
 | |
| 	struct i40e_pf *pf = (struct i40e_pf *)hw->back;
 | |
| 
 | |
| 	mem->size = ALIGN(size, alignment);
 | |
| 	mem->va = dma_zalloc_coherent(&pf->pdev->dev, mem->size,
 | |
| 				      &mem->pa, GFP_KERNEL);
 | |
| 	if (!mem->va)
 | |
| 		return -ENOMEM;
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_free_dma_mem_d - OS specific memory free for shared code
 | |
|  * @hw:   pointer to the HW structure
 | |
|  * @mem:  ptr to mem struct to free
 | |
|  **/
 | |
| int i40e_free_dma_mem_d(struct i40e_hw *hw, struct i40e_dma_mem *mem)
 | |
| {
 | |
| 	struct i40e_pf *pf = (struct i40e_pf *)hw->back;
 | |
| 
 | |
| 	dma_free_coherent(&pf->pdev->dev, mem->size, mem->va, mem->pa);
 | |
| 	mem->va = NULL;
 | |
| 	mem->pa = 0;
 | |
| 	mem->size = 0;
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_allocate_virt_mem_d - OS specific memory alloc for shared code
 | |
|  * @hw:   pointer to the HW structure
 | |
|  * @mem:  ptr to mem struct to fill out
 | |
|  * @size: size of memory requested
 | |
|  **/
 | |
| int i40e_allocate_virt_mem_d(struct i40e_hw *hw, struct i40e_virt_mem *mem,
 | |
| 			     u32 size)
 | |
| {
 | |
| 	mem->size = size;
 | |
| 	mem->va = kzalloc(size, GFP_KERNEL);
 | |
| 
 | |
| 	if (!mem->va)
 | |
| 		return -ENOMEM;
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_free_virt_mem_d - OS specific memory free for shared code
 | |
|  * @hw:   pointer to the HW structure
 | |
|  * @mem:  ptr to mem struct to free
 | |
|  **/
 | |
| int i40e_free_virt_mem_d(struct i40e_hw *hw, struct i40e_virt_mem *mem)
 | |
| {
 | |
| 	/* it's ok to kfree a NULL pointer */
 | |
| 	kfree(mem->va);
 | |
| 	mem->va = NULL;
 | |
| 	mem->size = 0;
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_get_lump - find a lump of free generic resource
 | |
|  * @pf: board private structure
 | |
|  * @pile: the pile of resource to search
 | |
|  * @needed: the number of items needed
 | |
|  * @id: an owner id to stick on the items assigned
 | |
|  *
 | |
|  * Returns the base item index of the lump, or negative for error
 | |
|  *
 | |
|  * The search_hint trick and lack of advanced fit-finding only work
 | |
|  * because we're highly likely to have all the same size lump requests.
 | |
|  * Linear search time and any fragmentation should be minimal.
 | |
|  **/
 | |
| static int i40e_get_lump(struct i40e_pf *pf, struct i40e_lump_tracking *pile,
 | |
| 			 u16 needed, u16 id)
 | |
| {
 | |
| 	int ret = -ENOMEM;
 | |
| 	int i, j;
 | |
| 
 | |
| 	if (!pile || needed == 0 || id >= I40E_PILE_VALID_BIT) {
 | |
| 		dev_info(&pf->pdev->dev,
 | |
| 			 "param err: pile=%p needed=%d id=0x%04x\n",
 | |
| 			 pile, needed, id);
 | |
| 		return -EINVAL;
 | |
| 	}
 | |
| 
 | |
| 	/* start the linear search with an imperfect hint */
 | |
| 	i = pile->search_hint;
 | |
| 	while (i < pile->num_entries) {
 | |
| 		/* skip already allocated entries */
 | |
| 		if (pile->list[i] & I40E_PILE_VALID_BIT) {
 | |
| 			i++;
 | |
| 			continue;
 | |
| 		}
 | |
| 
 | |
| 		/* do we have enough in this lump? */
 | |
| 		for (j = 0; (j < needed) && ((i+j) < pile->num_entries); j++) {
 | |
| 			if (pile->list[i+j] & I40E_PILE_VALID_BIT)
 | |
| 				break;
 | |
| 		}
 | |
| 
 | |
| 		if (j == needed) {
 | |
| 			/* there was enough, so assign it to the requestor */
 | |
| 			for (j = 0; j < needed; j++)
 | |
| 				pile->list[i+j] = id | I40E_PILE_VALID_BIT;
 | |
| 			ret = i;
 | |
| 			pile->search_hint = i + j;
 | |
| 			break;
 | |
| 		} else {
 | |
| 			/* not enough, so skip over it and continue looking */
 | |
| 			i += j;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_put_lump - return a lump of generic resource
 | |
|  * @pile: the pile of resource to search
 | |
|  * @index: the base item index
 | |
|  * @id: the owner id of the items assigned
 | |
|  *
 | |
|  * Returns the count of items in the lump
 | |
|  **/
 | |
| static int i40e_put_lump(struct i40e_lump_tracking *pile, u16 index, u16 id)
 | |
| {
 | |
| 	int valid_id = (id | I40E_PILE_VALID_BIT);
 | |
| 	int count = 0;
 | |
| 	int i;
 | |
| 
 | |
| 	if (!pile || index >= pile->num_entries)
 | |
| 		return -EINVAL;
 | |
| 
 | |
| 	for (i = index;
 | |
| 	     i < pile->num_entries && pile->list[i] == valid_id;
 | |
| 	     i++) {
 | |
| 		pile->list[i] = 0;
 | |
| 		count++;
 | |
| 	}
 | |
| 
 | |
| 	if (count && index < pile->search_hint)
 | |
| 		pile->search_hint = index;
 | |
| 
 | |
| 	return count;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_service_event_schedule - Schedule the service task to wake up
 | |
|  * @pf: board private structure
 | |
|  *
 | |
|  * If not already scheduled, this puts the task into the work queue
 | |
|  **/
 | |
| static void i40e_service_event_schedule(struct i40e_pf *pf)
 | |
| {
 | |
| 	if (!test_bit(__I40E_DOWN, &pf->state) &&
 | |
| 	    !test_bit(__I40E_RESET_RECOVERY_PENDING, &pf->state) &&
 | |
| 	    !test_and_set_bit(__I40E_SERVICE_SCHED, &pf->state))
 | |
| 		schedule_work(&pf->service_task);
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_tx_timeout - Respond to a Tx Hang
 | |
|  * @netdev: network interface device structure
 | |
|  *
 | |
|  * If any port has noticed a Tx timeout, it is likely that the whole
 | |
|  * device is munged, not just the one netdev port, so go for the full
 | |
|  * reset.
 | |
|  **/
 | |
| #ifdef I40E_FCOE
 | |
| void i40e_tx_timeout(struct net_device *netdev)
 | |
| #else
 | |
| static void i40e_tx_timeout(struct net_device *netdev)
 | |
| #endif
 | |
| {
 | |
| 	struct i40e_netdev_priv *np = netdev_priv(netdev);
 | |
| 	struct i40e_vsi *vsi = np->vsi;
 | |
| 	struct i40e_pf *pf = vsi->back;
 | |
| 
 | |
| 	pf->tx_timeout_count++;
 | |
| 
 | |
| 	if (time_after(jiffies, (pf->tx_timeout_last_recovery + HZ*20)))
 | |
| 		pf->tx_timeout_recovery_level = 1;
 | |
| 	pf->tx_timeout_last_recovery = jiffies;
 | |
| 	netdev_info(netdev, "tx_timeout recovery level %d\n",
 | |
| 		    pf->tx_timeout_recovery_level);
 | |
| 
 | |
| 	switch (pf->tx_timeout_recovery_level) {
 | |
| 	case 0:
 | |
| 		/* disable and re-enable queues for the VSI */
 | |
| 		if (in_interrupt()) {
 | |
| 			set_bit(__I40E_REINIT_REQUESTED, &pf->state);
 | |
| 			set_bit(__I40E_REINIT_REQUESTED, &vsi->state);
 | |
| 		} else {
 | |
| 			i40e_vsi_reinit_locked(vsi);
 | |
| 		}
 | |
| 		break;
 | |
| 	case 1:
 | |
| 		set_bit(__I40E_PF_RESET_REQUESTED, &pf->state);
 | |
| 		break;
 | |
| 	case 2:
 | |
| 		set_bit(__I40E_CORE_RESET_REQUESTED, &pf->state);
 | |
| 		break;
 | |
| 	case 3:
 | |
| 		set_bit(__I40E_GLOBAL_RESET_REQUESTED, &pf->state);
 | |
| 		break;
 | |
| 	default:
 | |
| 		netdev_err(netdev, "tx_timeout recovery unsuccessful\n");
 | |
| 		set_bit(__I40E_DOWN_REQUESTED, &pf->state);
 | |
| 		set_bit(__I40E_DOWN_REQUESTED, &vsi->state);
 | |
| 		break;
 | |
| 	}
 | |
| 	i40e_service_event_schedule(pf);
 | |
| 	pf->tx_timeout_recovery_level++;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_release_rx_desc - Store the new tail and head values
 | |
|  * @rx_ring: ring to bump
 | |
|  * @val: new head index
 | |
|  **/
 | |
| static inline void i40e_release_rx_desc(struct i40e_ring *rx_ring, u32 val)
 | |
| {
 | |
| 	rx_ring->next_to_use = val;
 | |
| 
 | |
| 	/* Force memory writes to complete before letting h/w
 | |
| 	 * know there are new descriptors to fetch.  (Only
 | |
| 	 * applicable for weak-ordered memory model archs,
 | |
| 	 * such as IA-64).
 | |
| 	 */
 | |
| 	wmb();
 | |
| 	writel(val, rx_ring->tail);
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_get_vsi_stats_struct - Get System Network Statistics
 | |
|  * @vsi: the VSI we care about
 | |
|  *
 | |
|  * Returns the address of the device statistics structure.
 | |
|  * The statistics are actually updated from the service task.
 | |
|  **/
 | |
| struct rtnl_link_stats64 *i40e_get_vsi_stats_struct(struct i40e_vsi *vsi)
 | |
| {
 | |
| 	return &vsi->net_stats;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_get_netdev_stats_struct - Get statistics for netdev interface
 | |
|  * @netdev: network interface device structure
 | |
|  *
 | |
|  * Returns the address of the device statistics structure.
 | |
|  * The statistics are actually updated from the service task.
 | |
|  **/
 | |
| #ifdef I40E_FCOE
 | |
| struct rtnl_link_stats64 *i40e_get_netdev_stats_struct(
 | |
| 					     struct net_device *netdev,
 | |
| 					     struct rtnl_link_stats64 *stats)
 | |
| #else
 | |
| static struct rtnl_link_stats64 *i40e_get_netdev_stats_struct(
 | |
| 					     struct net_device *netdev,
 | |
| 					     struct rtnl_link_stats64 *stats)
 | |
| #endif
 | |
| {
 | |
| 	struct i40e_netdev_priv *np = netdev_priv(netdev);
 | |
| 	struct i40e_ring *tx_ring, *rx_ring;
 | |
| 	struct i40e_vsi *vsi = np->vsi;
 | |
| 	struct rtnl_link_stats64 *vsi_stats = i40e_get_vsi_stats_struct(vsi);
 | |
| 	int i;
 | |
| 
 | |
| 	if (test_bit(__I40E_DOWN, &vsi->state))
 | |
| 		return stats;
 | |
| 
 | |
| 	if (!vsi->tx_rings)
 | |
| 		return stats;
 | |
| 
 | |
| 	rcu_read_lock();
 | |
| 	for (i = 0; i < vsi->num_queue_pairs; i++) {
 | |
| 		u64 bytes, packets;
 | |
| 		unsigned int start;
 | |
| 
 | |
| 		tx_ring = ACCESS_ONCE(vsi->tx_rings[i]);
 | |
| 		if (!tx_ring)
 | |
| 			continue;
 | |
| 
 | |
| 		do {
 | |
| 			start = u64_stats_fetch_begin_irq(&tx_ring->syncp);
 | |
| 			packets = tx_ring->stats.packets;
 | |
| 			bytes   = tx_ring->stats.bytes;
 | |
| 		} while (u64_stats_fetch_retry_irq(&tx_ring->syncp, start));
 | |
| 
 | |
| 		stats->tx_packets += packets;
 | |
| 		stats->tx_bytes   += bytes;
 | |
| 		rx_ring = &tx_ring[1];
 | |
| 
 | |
| 		do {
 | |
| 			start = u64_stats_fetch_begin_irq(&rx_ring->syncp);
 | |
| 			packets = rx_ring->stats.packets;
 | |
| 			bytes   = rx_ring->stats.bytes;
 | |
| 		} while (u64_stats_fetch_retry_irq(&rx_ring->syncp, start));
 | |
| 
 | |
| 		stats->rx_packets += packets;
 | |
| 		stats->rx_bytes   += bytes;
 | |
| 	}
 | |
| 	rcu_read_unlock();
 | |
| 
 | |
| 	/* following stats updated by i40e_watchdog_subtask() */
 | |
| 	stats->multicast	= vsi_stats->multicast;
 | |
| 	stats->tx_errors	= vsi_stats->tx_errors;
 | |
| 	stats->tx_dropped	= vsi_stats->tx_dropped;
 | |
| 	stats->rx_errors	= vsi_stats->rx_errors;
 | |
| 	stats->rx_crc_errors	= vsi_stats->rx_crc_errors;
 | |
| 	stats->rx_length_errors	= vsi_stats->rx_length_errors;
 | |
| 
 | |
| 	return stats;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_vsi_reset_stats - Resets all stats of the given vsi
 | |
|  * @vsi: the VSI to have its stats reset
 | |
|  **/
 | |
| void i40e_vsi_reset_stats(struct i40e_vsi *vsi)
 | |
| {
 | |
| 	struct rtnl_link_stats64 *ns;
 | |
| 	int i;
 | |
| 
 | |
| 	if (!vsi)
 | |
| 		return;
 | |
| 
 | |
| 	ns = i40e_get_vsi_stats_struct(vsi);
 | |
| 	memset(ns, 0, sizeof(*ns));
 | |
| 	memset(&vsi->net_stats_offsets, 0, sizeof(vsi->net_stats_offsets));
 | |
| 	memset(&vsi->eth_stats, 0, sizeof(vsi->eth_stats));
 | |
| 	memset(&vsi->eth_stats_offsets, 0, sizeof(vsi->eth_stats_offsets));
 | |
| 	if (vsi->rx_rings && vsi->rx_rings[0]) {
 | |
| 		for (i = 0; i < vsi->num_queue_pairs; i++) {
 | |
| 			memset(&vsi->rx_rings[i]->stats, 0 ,
 | |
| 			       sizeof(vsi->rx_rings[i]->stats));
 | |
| 			memset(&vsi->rx_rings[i]->rx_stats, 0 ,
 | |
| 			       sizeof(vsi->rx_rings[i]->rx_stats));
 | |
| 			memset(&vsi->tx_rings[i]->stats, 0 ,
 | |
| 			       sizeof(vsi->tx_rings[i]->stats));
 | |
| 			memset(&vsi->tx_rings[i]->tx_stats, 0,
 | |
| 			       sizeof(vsi->tx_rings[i]->tx_stats));
 | |
| 		}
 | |
| 	}
 | |
| 	vsi->stat_offsets_loaded = false;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_pf_reset_stats - Reset all of the stats for the given pf
 | |
|  * @pf: the PF to be reset
 | |
|  **/
 | |
| void i40e_pf_reset_stats(struct i40e_pf *pf)
 | |
| {
 | |
| 	int i;
 | |
| 
 | |
| 	memset(&pf->stats, 0, sizeof(pf->stats));
 | |
| 	memset(&pf->stats_offsets, 0, sizeof(pf->stats_offsets));
 | |
| 	pf->stat_offsets_loaded = false;
 | |
| 
 | |
| 	for (i = 0; i < I40E_MAX_VEB; i++) {
 | |
| 		if (pf->veb[i]) {
 | |
| 			memset(&pf->veb[i]->stats, 0,
 | |
| 			       sizeof(pf->veb[i]->stats));
 | |
| 			memset(&pf->veb[i]->stats_offsets, 0,
 | |
| 			       sizeof(pf->veb[i]->stats_offsets));
 | |
| 			pf->veb[i]->stat_offsets_loaded = false;
 | |
| 		}
 | |
| 	}
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_stat_update48 - read and update a 48 bit stat from the chip
 | |
|  * @hw: ptr to the hardware info
 | |
|  * @hireg: the high 32 bit reg to read
 | |
|  * @loreg: the low 32 bit reg to read
 | |
|  * @offset_loaded: has the initial offset been loaded yet
 | |
|  * @offset: ptr to current offset value
 | |
|  * @stat: ptr to the stat
 | |
|  *
 | |
|  * Since the device stats are not reset at PFReset, they likely will not
 | |
|  * be zeroed when the driver starts.  We'll save the first values read
 | |
|  * and use them as offsets to be subtracted from the raw values in order
 | |
|  * to report stats that count from zero.  In the process, we also manage
 | |
|  * the potential roll-over.
 | |
|  **/
 | |
| static void i40e_stat_update48(struct i40e_hw *hw, u32 hireg, u32 loreg,
 | |
| 			       bool offset_loaded, u64 *offset, u64 *stat)
 | |
| {
 | |
| 	u64 new_data;
 | |
| 
 | |
| 	if (hw->device_id == I40E_DEV_ID_QEMU) {
 | |
| 		new_data = rd32(hw, loreg);
 | |
| 		new_data |= ((u64)(rd32(hw, hireg) & 0xFFFF)) << 32;
 | |
| 	} else {
 | |
| 		new_data = rd64(hw, loreg);
 | |
| 	}
 | |
| 	if (!offset_loaded)
 | |
| 		*offset = new_data;
 | |
| 	if (likely(new_data >= *offset))
 | |
| 		*stat = new_data - *offset;
 | |
| 	else
 | |
| 		*stat = (new_data + ((u64)1 << 48)) - *offset;
 | |
| 	*stat &= 0xFFFFFFFFFFFFULL;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_stat_update32 - read and update a 32 bit stat from the chip
 | |
|  * @hw: ptr to the hardware info
 | |
|  * @reg: the hw reg to read
 | |
|  * @offset_loaded: has the initial offset been loaded yet
 | |
|  * @offset: ptr to current offset value
 | |
|  * @stat: ptr to the stat
 | |
|  **/
 | |
| static void i40e_stat_update32(struct i40e_hw *hw, u32 reg,
 | |
| 			       bool offset_loaded, u64 *offset, u64 *stat)
 | |
| {
 | |
| 	u32 new_data;
 | |
| 
 | |
| 	new_data = rd32(hw, reg);
 | |
| 	if (!offset_loaded)
 | |
| 		*offset = new_data;
 | |
| 	if (likely(new_data >= *offset))
 | |
| 		*stat = (u32)(new_data - *offset);
 | |
| 	else
 | |
| 		*stat = (u32)((new_data + ((u64)1 << 32)) - *offset);
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_update_eth_stats - Update VSI-specific ethernet statistics counters.
 | |
|  * @vsi: the VSI to be updated
 | |
|  **/
 | |
| void i40e_update_eth_stats(struct i40e_vsi *vsi)
 | |
| {
 | |
| 	int stat_idx = le16_to_cpu(vsi->info.stat_counter_idx);
 | |
| 	struct i40e_pf *pf = vsi->back;
 | |
| 	struct i40e_hw *hw = &pf->hw;
 | |
| 	struct i40e_eth_stats *oes;
 | |
| 	struct i40e_eth_stats *es;     /* device's eth stats */
 | |
| 
 | |
| 	es = &vsi->eth_stats;
 | |
| 	oes = &vsi->eth_stats_offsets;
 | |
| 
 | |
| 	/* Gather up the stats that the hw collects */
 | |
| 	i40e_stat_update32(hw, I40E_GLV_TEPC(stat_idx),
 | |
| 			   vsi->stat_offsets_loaded,
 | |
| 			   &oes->tx_errors, &es->tx_errors);
 | |
| 	i40e_stat_update32(hw, I40E_GLV_RDPC(stat_idx),
 | |
| 			   vsi->stat_offsets_loaded,
 | |
| 			   &oes->rx_discards, &es->rx_discards);
 | |
| 	i40e_stat_update32(hw, I40E_GLV_RUPP(stat_idx),
 | |
| 			   vsi->stat_offsets_loaded,
 | |
| 			   &oes->rx_unknown_protocol, &es->rx_unknown_protocol);
 | |
| 	i40e_stat_update32(hw, I40E_GLV_TEPC(stat_idx),
 | |
| 			   vsi->stat_offsets_loaded,
 | |
| 			   &oes->tx_errors, &es->tx_errors);
 | |
| 
 | |
| 	i40e_stat_update48(hw, I40E_GLV_GORCH(stat_idx),
 | |
| 			   I40E_GLV_GORCL(stat_idx),
 | |
| 			   vsi->stat_offsets_loaded,
 | |
| 			   &oes->rx_bytes, &es->rx_bytes);
 | |
| 	i40e_stat_update48(hw, I40E_GLV_UPRCH(stat_idx),
 | |
| 			   I40E_GLV_UPRCL(stat_idx),
 | |
| 			   vsi->stat_offsets_loaded,
 | |
| 			   &oes->rx_unicast, &es->rx_unicast);
 | |
| 	i40e_stat_update48(hw, I40E_GLV_MPRCH(stat_idx),
 | |
| 			   I40E_GLV_MPRCL(stat_idx),
 | |
| 			   vsi->stat_offsets_loaded,
 | |
| 			   &oes->rx_multicast, &es->rx_multicast);
 | |
| 	i40e_stat_update48(hw, I40E_GLV_BPRCH(stat_idx),
 | |
| 			   I40E_GLV_BPRCL(stat_idx),
 | |
| 			   vsi->stat_offsets_loaded,
 | |
| 			   &oes->rx_broadcast, &es->rx_broadcast);
 | |
| 
 | |
| 	i40e_stat_update48(hw, I40E_GLV_GOTCH(stat_idx),
 | |
| 			   I40E_GLV_GOTCL(stat_idx),
 | |
| 			   vsi->stat_offsets_loaded,
 | |
| 			   &oes->tx_bytes, &es->tx_bytes);
 | |
| 	i40e_stat_update48(hw, I40E_GLV_UPTCH(stat_idx),
 | |
| 			   I40E_GLV_UPTCL(stat_idx),
 | |
| 			   vsi->stat_offsets_loaded,
 | |
| 			   &oes->tx_unicast, &es->tx_unicast);
 | |
| 	i40e_stat_update48(hw, I40E_GLV_MPTCH(stat_idx),
 | |
| 			   I40E_GLV_MPTCL(stat_idx),
 | |
| 			   vsi->stat_offsets_loaded,
 | |
| 			   &oes->tx_multicast, &es->tx_multicast);
 | |
| 	i40e_stat_update48(hw, I40E_GLV_BPTCH(stat_idx),
 | |
| 			   I40E_GLV_BPTCL(stat_idx),
 | |
| 			   vsi->stat_offsets_loaded,
 | |
| 			   &oes->tx_broadcast, &es->tx_broadcast);
 | |
| 	vsi->stat_offsets_loaded = true;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_update_veb_stats - Update Switch component statistics
 | |
|  * @veb: the VEB being updated
 | |
|  **/
 | |
| static void i40e_update_veb_stats(struct i40e_veb *veb)
 | |
| {
 | |
| 	struct i40e_pf *pf = veb->pf;
 | |
| 	struct i40e_hw *hw = &pf->hw;
 | |
| 	struct i40e_eth_stats *oes;
 | |
| 	struct i40e_eth_stats *es;     /* device's eth stats */
 | |
| 	int idx = 0;
 | |
| 
 | |
| 	idx = veb->stats_idx;
 | |
| 	es = &veb->stats;
 | |
| 	oes = &veb->stats_offsets;
 | |
| 
 | |
| 	/* Gather up the stats that the hw collects */
 | |
| 	i40e_stat_update32(hw, I40E_GLSW_TDPC(idx),
 | |
| 			   veb->stat_offsets_loaded,
 | |
| 			   &oes->tx_discards, &es->tx_discards);
 | |
| 	if (hw->revision_id > 0)
 | |
| 		i40e_stat_update32(hw, I40E_GLSW_RUPP(idx),
 | |
| 				   veb->stat_offsets_loaded,
 | |
| 				   &oes->rx_unknown_protocol,
 | |
| 				   &es->rx_unknown_protocol);
 | |
| 	i40e_stat_update48(hw, I40E_GLSW_GORCH(idx), I40E_GLSW_GORCL(idx),
 | |
| 			   veb->stat_offsets_loaded,
 | |
| 			   &oes->rx_bytes, &es->rx_bytes);
 | |
| 	i40e_stat_update48(hw, I40E_GLSW_UPRCH(idx), I40E_GLSW_UPRCL(idx),
 | |
| 			   veb->stat_offsets_loaded,
 | |
| 			   &oes->rx_unicast, &es->rx_unicast);
 | |
| 	i40e_stat_update48(hw, I40E_GLSW_MPRCH(idx), I40E_GLSW_MPRCL(idx),
 | |
| 			   veb->stat_offsets_loaded,
 | |
| 			   &oes->rx_multicast, &es->rx_multicast);
 | |
| 	i40e_stat_update48(hw, I40E_GLSW_BPRCH(idx), I40E_GLSW_BPRCL(idx),
 | |
| 			   veb->stat_offsets_loaded,
 | |
| 			   &oes->rx_broadcast, &es->rx_broadcast);
 | |
| 
 | |
| 	i40e_stat_update48(hw, I40E_GLSW_GOTCH(idx), I40E_GLSW_GOTCL(idx),
 | |
| 			   veb->stat_offsets_loaded,
 | |
| 			   &oes->tx_bytes, &es->tx_bytes);
 | |
| 	i40e_stat_update48(hw, I40E_GLSW_UPTCH(idx), I40E_GLSW_UPTCL(idx),
 | |
| 			   veb->stat_offsets_loaded,
 | |
| 			   &oes->tx_unicast, &es->tx_unicast);
 | |
| 	i40e_stat_update48(hw, I40E_GLSW_MPTCH(idx), I40E_GLSW_MPTCL(idx),
 | |
| 			   veb->stat_offsets_loaded,
 | |
| 			   &oes->tx_multicast, &es->tx_multicast);
 | |
| 	i40e_stat_update48(hw, I40E_GLSW_BPTCH(idx), I40E_GLSW_BPTCL(idx),
 | |
| 			   veb->stat_offsets_loaded,
 | |
| 			   &oes->tx_broadcast, &es->tx_broadcast);
 | |
| 	veb->stat_offsets_loaded = true;
 | |
| }
 | |
| 
 | |
| #ifdef I40E_FCOE
 | |
| /**
 | |
|  * i40e_update_fcoe_stats - Update FCoE-specific ethernet statistics counters.
 | |
|  * @vsi: the VSI that is capable of doing FCoE
 | |
|  **/
 | |
| static void i40e_update_fcoe_stats(struct i40e_vsi *vsi)
 | |
| {
 | |
| 	struct i40e_pf *pf = vsi->back;
 | |
| 	struct i40e_hw *hw = &pf->hw;
 | |
| 	struct i40e_fcoe_stats *ofs;
 | |
| 	struct i40e_fcoe_stats *fs;     /* device's eth stats */
 | |
| 	int idx;
 | |
| 
 | |
| 	if (vsi->type != I40E_VSI_FCOE)
 | |
| 		return;
 | |
| 
 | |
| 	idx = (pf->pf_seid - I40E_BASE_PF_SEID) + I40E_FCOE_PF_STAT_OFFSET;
 | |
| 	fs = &vsi->fcoe_stats;
 | |
| 	ofs = &vsi->fcoe_stats_offsets;
 | |
| 
 | |
| 	i40e_stat_update32(hw, I40E_GL_FCOEPRC(idx),
 | |
| 			   vsi->fcoe_stat_offsets_loaded,
 | |
| 			   &ofs->rx_fcoe_packets, &fs->rx_fcoe_packets);
 | |
| 	i40e_stat_update48(hw, I40E_GL_FCOEDWRCH(idx), I40E_GL_FCOEDWRCL(idx),
 | |
| 			   vsi->fcoe_stat_offsets_loaded,
 | |
| 			   &ofs->rx_fcoe_dwords, &fs->rx_fcoe_dwords);
 | |
| 	i40e_stat_update32(hw, I40E_GL_FCOERPDC(idx),
 | |
| 			   vsi->fcoe_stat_offsets_loaded,
 | |
| 			   &ofs->rx_fcoe_dropped, &fs->rx_fcoe_dropped);
 | |
| 	i40e_stat_update32(hw, I40E_GL_FCOEPTC(idx),
 | |
| 			   vsi->fcoe_stat_offsets_loaded,
 | |
| 			   &ofs->tx_fcoe_packets, &fs->tx_fcoe_packets);
 | |
| 	i40e_stat_update48(hw, I40E_GL_FCOEDWTCH(idx), I40E_GL_FCOEDWTCL(idx),
 | |
| 			   vsi->fcoe_stat_offsets_loaded,
 | |
| 			   &ofs->tx_fcoe_dwords, &fs->tx_fcoe_dwords);
 | |
| 	i40e_stat_update32(hw, I40E_GL_FCOECRC(idx),
 | |
| 			   vsi->fcoe_stat_offsets_loaded,
 | |
| 			   &ofs->fcoe_bad_fccrc, &fs->fcoe_bad_fccrc);
 | |
| 	i40e_stat_update32(hw, I40E_GL_FCOELAST(idx),
 | |
| 			   vsi->fcoe_stat_offsets_loaded,
 | |
| 			   &ofs->fcoe_last_error, &fs->fcoe_last_error);
 | |
| 	i40e_stat_update32(hw, I40E_GL_FCOEDDPC(idx),
 | |
| 			   vsi->fcoe_stat_offsets_loaded,
 | |
| 			   &ofs->fcoe_ddp_count, &fs->fcoe_ddp_count);
 | |
| 
 | |
| 	vsi->fcoe_stat_offsets_loaded = true;
 | |
| }
 | |
| 
 | |
| #endif
 | |
| /**
 | |
|  * i40e_update_link_xoff_rx - Update XOFF received in link flow control mode
 | |
|  * @pf: the corresponding PF
 | |
|  *
 | |
|  * Update the Rx XOFF counter (PAUSE frames) in link flow control mode
 | |
|  **/
 | |
| static void i40e_update_link_xoff_rx(struct i40e_pf *pf)
 | |
| {
 | |
| 	struct i40e_hw_port_stats *osd = &pf->stats_offsets;
 | |
| 	struct i40e_hw_port_stats *nsd = &pf->stats;
 | |
| 	struct i40e_hw *hw = &pf->hw;
 | |
| 	u64 xoff = 0;
 | |
| 	u16 i, v;
 | |
| 
 | |
| 	if ((hw->fc.current_mode != I40E_FC_FULL) &&
 | |
| 	    (hw->fc.current_mode != I40E_FC_RX_PAUSE))
 | |
| 		return;
 | |
| 
 | |
| 	xoff = nsd->link_xoff_rx;
 | |
| 	i40e_stat_update32(hw, I40E_GLPRT_LXOFFRXC(hw->port),
 | |
| 			   pf->stat_offsets_loaded,
 | |
| 			   &osd->link_xoff_rx, &nsd->link_xoff_rx);
 | |
| 
 | |
| 	/* No new LFC xoff rx */
 | |
| 	if (!(nsd->link_xoff_rx - xoff))
 | |
| 		return;
 | |
| 
 | |
| 	/* Clear the __I40E_HANG_CHECK_ARMED bit for all Tx rings */
 | |
| 	for (v = 0; v < pf->num_alloc_vsi; v++) {
 | |
| 		struct i40e_vsi *vsi = pf->vsi[v];
 | |
| 
 | |
| 		if (!vsi || !vsi->tx_rings[0])
 | |
| 			continue;
 | |
| 
 | |
| 		for (i = 0; i < vsi->num_queue_pairs; i++) {
 | |
| 			struct i40e_ring *ring = vsi->tx_rings[i];
 | |
| 			clear_bit(__I40E_HANG_CHECK_ARMED, &ring->state);
 | |
| 		}
 | |
| 	}
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_update_prio_xoff_rx - Update XOFF received in PFC mode
 | |
|  * @pf: the corresponding PF
 | |
|  *
 | |
|  * Update the Rx XOFF counter (PAUSE frames) in PFC mode
 | |
|  **/
 | |
| static void i40e_update_prio_xoff_rx(struct i40e_pf *pf)
 | |
| {
 | |
| 	struct i40e_hw_port_stats *osd = &pf->stats_offsets;
 | |
| 	struct i40e_hw_port_stats *nsd = &pf->stats;
 | |
| 	bool xoff[I40E_MAX_TRAFFIC_CLASS] = {false};
 | |
| 	struct i40e_dcbx_config *dcb_cfg;
 | |
| 	struct i40e_hw *hw = &pf->hw;
 | |
| 	u16 i, v;
 | |
| 	u8 tc;
 | |
| 
 | |
| 	dcb_cfg = &hw->local_dcbx_config;
 | |
| 
 | |
| 	/* See if DCB enabled with PFC TC */
 | |
| 	if (!(pf->flags & I40E_FLAG_DCB_ENABLED) ||
 | |
| 	    !(dcb_cfg->pfc.pfcenable)) {
 | |
| 		i40e_update_link_xoff_rx(pf);
 | |
| 		return;
 | |
| 	}
 | |
| 
 | |
| 	for (i = 0; i < I40E_MAX_USER_PRIORITY; i++) {
 | |
| 		u64 prio_xoff = nsd->priority_xoff_rx[i];
 | |
| 		i40e_stat_update32(hw, I40E_GLPRT_PXOFFRXC(hw->port, i),
 | |
| 				   pf->stat_offsets_loaded,
 | |
| 				   &osd->priority_xoff_rx[i],
 | |
| 				   &nsd->priority_xoff_rx[i]);
 | |
| 
 | |
| 		/* No new PFC xoff rx */
 | |
| 		if (!(nsd->priority_xoff_rx[i] - prio_xoff))
 | |
| 			continue;
 | |
| 		/* Get the TC for given priority */
 | |
| 		tc = dcb_cfg->etscfg.prioritytable[i];
 | |
| 		xoff[tc] = true;
 | |
| 	}
 | |
| 
 | |
| 	/* Clear the __I40E_HANG_CHECK_ARMED bit for Tx rings */
 | |
| 	for (v = 0; v < pf->num_alloc_vsi; v++) {
 | |
| 		struct i40e_vsi *vsi = pf->vsi[v];
 | |
| 
 | |
| 		if (!vsi || !vsi->tx_rings[0])
 | |
| 			continue;
 | |
| 
 | |
| 		for (i = 0; i < vsi->num_queue_pairs; i++) {
 | |
| 			struct i40e_ring *ring = vsi->tx_rings[i];
 | |
| 
 | |
| 			tc = ring->dcb_tc;
 | |
| 			if (xoff[tc])
 | |
| 				clear_bit(__I40E_HANG_CHECK_ARMED,
 | |
| 					  &ring->state);
 | |
| 		}
 | |
| 	}
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_update_vsi_stats - Update the vsi statistics counters.
 | |
|  * @vsi: the VSI to be updated
 | |
|  *
 | |
|  * There are a few instances where we store the same stat in a
 | |
|  * couple of different structs.  This is partly because we have
 | |
|  * the netdev stats that need to be filled out, which is slightly
 | |
|  * different from the "eth_stats" defined by the chip and used in
 | |
|  * VF communications.  We sort it out here.
 | |
|  **/
 | |
| static void i40e_update_vsi_stats(struct i40e_vsi *vsi)
 | |
| {
 | |
| 	struct i40e_pf *pf = vsi->back;
 | |
| 	struct rtnl_link_stats64 *ons;
 | |
| 	struct rtnl_link_stats64 *ns;   /* netdev stats */
 | |
| 	struct i40e_eth_stats *oes;
 | |
| 	struct i40e_eth_stats *es;     /* device's eth stats */
 | |
| 	u32 tx_restart, tx_busy;
 | |
| 	u32 rx_page, rx_buf;
 | |
| 	u64 rx_p, rx_b;
 | |
| 	u64 tx_p, tx_b;
 | |
| 	u16 q;
 | |
| 
 | |
| 	if (test_bit(__I40E_DOWN, &vsi->state) ||
 | |
| 	    test_bit(__I40E_CONFIG_BUSY, &pf->state))
 | |
| 		return;
 | |
| 
 | |
| 	ns = i40e_get_vsi_stats_struct(vsi);
 | |
| 	ons = &vsi->net_stats_offsets;
 | |
| 	es = &vsi->eth_stats;
 | |
| 	oes = &vsi->eth_stats_offsets;
 | |
| 
 | |
| 	/* Gather up the netdev and vsi stats that the driver collects
 | |
| 	 * on the fly during packet processing
 | |
| 	 */
 | |
| 	rx_b = rx_p = 0;
 | |
| 	tx_b = tx_p = 0;
 | |
| 	tx_restart = tx_busy = 0;
 | |
| 	rx_page = 0;
 | |
| 	rx_buf = 0;
 | |
| 	rcu_read_lock();
 | |
| 	for (q = 0; q < vsi->num_queue_pairs; q++) {
 | |
| 		struct i40e_ring *p;
 | |
| 		u64 bytes, packets;
 | |
| 		unsigned int start;
 | |
| 
 | |
| 		/* locate Tx ring */
 | |
| 		p = ACCESS_ONCE(vsi->tx_rings[q]);
 | |
| 
 | |
| 		do {
 | |
| 			start = u64_stats_fetch_begin_irq(&p->syncp);
 | |
| 			packets = p->stats.packets;
 | |
| 			bytes = p->stats.bytes;
 | |
| 		} while (u64_stats_fetch_retry_irq(&p->syncp, start));
 | |
| 		tx_b += bytes;
 | |
| 		tx_p += packets;
 | |
| 		tx_restart += p->tx_stats.restart_queue;
 | |
| 		tx_busy += p->tx_stats.tx_busy;
 | |
| 
 | |
| 		/* Rx queue is part of the same block as Tx queue */
 | |
| 		p = &p[1];
 | |
| 		do {
 | |
| 			start = u64_stats_fetch_begin_irq(&p->syncp);
 | |
| 			packets = p->stats.packets;
 | |
| 			bytes = p->stats.bytes;
 | |
| 		} while (u64_stats_fetch_retry_irq(&p->syncp, start));
 | |
| 		rx_b += bytes;
 | |
| 		rx_p += packets;
 | |
| 		rx_buf += p->rx_stats.alloc_buff_failed;
 | |
| 		rx_page += p->rx_stats.alloc_page_failed;
 | |
| 	}
 | |
| 	rcu_read_unlock();
 | |
| 	vsi->tx_restart = tx_restart;
 | |
| 	vsi->tx_busy = tx_busy;
 | |
| 	vsi->rx_page_failed = rx_page;
 | |
| 	vsi->rx_buf_failed = rx_buf;
 | |
| 
 | |
| 	ns->rx_packets = rx_p;
 | |
| 	ns->rx_bytes = rx_b;
 | |
| 	ns->tx_packets = tx_p;
 | |
| 	ns->tx_bytes = tx_b;
 | |
| 
 | |
| 	/* update netdev stats from eth stats */
 | |
| 	i40e_update_eth_stats(vsi);
 | |
| 	ons->tx_errors = oes->tx_errors;
 | |
| 	ns->tx_errors = es->tx_errors;
 | |
| 	ons->multicast = oes->rx_multicast;
 | |
| 	ns->multicast = es->rx_multicast;
 | |
| 	ons->rx_dropped = oes->rx_discards;
 | |
| 	ns->rx_dropped = es->rx_discards;
 | |
| 	ons->tx_dropped = oes->tx_discards;
 | |
| 	ns->tx_dropped = es->tx_discards;
 | |
| 
 | |
| 	/* pull in a couple PF stats if this is the main vsi */
 | |
| 	if (vsi == pf->vsi[pf->lan_vsi]) {
 | |
| 		ns->rx_crc_errors = pf->stats.crc_errors;
 | |
| 		ns->rx_errors = pf->stats.crc_errors + pf->stats.illegal_bytes;
 | |
| 		ns->rx_length_errors = pf->stats.rx_length_errors;
 | |
| 	}
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_update_pf_stats - Update the pf statistics counters.
 | |
|  * @pf: the PF to be updated
 | |
|  **/
 | |
| static void i40e_update_pf_stats(struct i40e_pf *pf)
 | |
| {
 | |
| 	struct i40e_hw_port_stats *osd = &pf->stats_offsets;
 | |
| 	struct i40e_hw_port_stats *nsd = &pf->stats;
 | |
| 	struct i40e_hw *hw = &pf->hw;
 | |
| 	u32 val;
 | |
| 	int i;
 | |
| 
 | |
| 	i40e_stat_update48(hw, I40E_GLPRT_GORCH(hw->port),
 | |
| 			   I40E_GLPRT_GORCL(hw->port),
 | |
| 			   pf->stat_offsets_loaded,
 | |
| 			   &osd->eth.rx_bytes, &nsd->eth.rx_bytes);
 | |
| 	i40e_stat_update48(hw, I40E_GLPRT_GOTCH(hw->port),
 | |
| 			   I40E_GLPRT_GOTCL(hw->port),
 | |
| 			   pf->stat_offsets_loaded,
 | |
| 			   &osd->eth.tx_bytes, &nsd->eth.tx_bytes);
 | |
| 	i40e_stat_update32(hw, I40E_GLPRT_RDPC(hw->port),
 | |
| 			   pf->stat_offsets_loaded,
 | |
| 			   &osd->eth.rx_discards,
 | |
| 			   &nsd->eth.rx_discards);
 | |
| 	i40e_stat_update32(hw, I40E_GLPRT_TDPC(hw->port),
 | |
| 			   pf->stat_offsets_loaded,
 | |
| 			   &osd->eth.tx_discards,
 | |
| 			   &nsd->eth.tx_discards);
 | |
| 
 | |
| 	i40e_stat_update48(hw, I40E_GLPRT_UPRCH(hw->port),
 | |
| 			   I40E_GLPRT_UPRCL(hw->port),
 | |
| 			   pf->stat_offsets_loaded,
 | |
| 			   &osd->eth.rx_unicast,
 | |
| 			   &nsd->eth.rx_unicast);
 | |
| 	i40e_stat_update48(hw, I40E_GLPRT_MPRCH(hw->port),
 | |
| 			   I40E_GLPRT_MPRCL(hw->port),
 | |
| 			   pf->stat_offsets_loaded,
 | |
| 			   &osd->eth.rx_multicast,
 | |
| 			   &nsd->eth.rx_multicast);
 | |
| 	i40e_stat_update48(hw, I40E_GLPRT_BPRCH(hw->port),
 | |
| 			   I40E_GLPRT_BPRCL(hw->port),
 | |
| 			   pf->stat_offsets_loaded,
 | |
| 			   &osd->eth.rx_broadcast,
 | |
| 			   &nsd->eth.rx_broadcast);
 | |
| 	i40e_stat_update48(hw, I40E_GLPRT_UPTCH(hw->port),
 | |
| 			   I40E_GLPRT_UPTCL(hw->port),
 | |
| 			   pf->stat_offsets_loaded,
 | |
| 			   &osd->eth.tx_unicast,
 | |
| 			   &nsd->eth.tx_unicast);
 | |
| 	i40e_stat_update48(hw, I40E_GLPRT_MPTCH(hw->port),
 | |
| 			   I40E_GLPRT_MPTCL(hw->port),
 | |
| 			   pf->stat_offsets_loaded,
 | |
| 			   &osd->eth.tx_multicast,
 | |
| 			   &nsd->eth.tx_multicast);
 | |
| 	i40e_stat_update48(hw, I40E_GLPRT_BPTCH(hw->port),
 | |
| 			   I40E_GLPRT_BPTCL(hw->port),
 | |
| 			   pf->stat_offsets_loaded,
 | |
| 			   &osd->eth.tx_broadcast,
 | |
| 			   &nsd->eth.tx_broadcast);
 | |
| 
 | |
| 	i40e_stat_update32(hw, I40E_GLPRT_TDOLD(hw->port),
 | |
| 			   pf->stat_offsets_loaded,
 | |
| 			   &osd->tx_dropped_link_down,
 | |
| 			   &nsd->tx_dropped_link_down);
 | |
| 
 | |
| 	i40e_stat_update32(hw, I40E_GLPRT_CRCERRS(hw->port),
 | |
| 			   pf->stat_offsets_loaded,
 | |
| 			   &osd->crc_errors, &nsd->crc_errors);
 | |
| 
 | |
| 	i40e_stat_update32(hw, I40E_GLPRT_ILLERRC(hw->port),
 | |
| 			   pf->stat_offsets_loaded,
 | |
| 			   &osd->illegal_bytes, &nsd->illegal_bytes);
 | |
| 
 | |
| 	i40e_stat_update32(hw, I40E_GLPRT_MLFC(hw->port),
 | |
| 			   pf->stat_offsets_loaded,
 | |
| 			   &osd->mac_local_faults,
 | |
| 			   &nsd->mac_local_faults);
 | |
| 	i40e_stat_update32(hw, I40E_GLPRT_MRFC(hw->port),
 | |
| 			   pf->stat_offsets_loaded,
 | |
| 			   &osd->mac_remote_faults,
 | |
| 			   &nsd->mac_remote_faults);
 | |
| 
 | |
| 	i40e_stat_update32(hw, I40E_GLPRT_RLEC(hw->port),
 | |
| 			   pf->stat_offsets_loaded,
 | |
| 			   &osd->rx_length_errors,
 | |
| 			   &nsd->rx_length_errors);
 | |
| 
 | |
| 	i40e_stat_update32(hw, I40E_GLPRT_LXONRXC(hw->port),
 | |
| 			   pf->stat_offsets_loaded,
 | |
| 			   &osd->link_xon_rx, &nsd->link_xon_rx);
 | |
| 	i40e_stat_update32(hw, I40E_GLPRT_LXONTXC(hw->port),
 | |
| 			   pf->stat_offsets_loaded,
 | |
| 			   &osd->link_xon_tx, &nsd->link_xon_tx);
 | |
| 	i40e_update_prio_xoff_rx(pf);  /* handles I40E_GLPRT_LXOFFRXC */
 | |
| 	i40e_stat_update32(hw, I40E_GLPRT_LXOFFTXC(hw->port),
 | |
| 			   pf->stat_offsets_loaded,
 | |
| 			   &osd->link_xoff_tx, &nsd->link_xoff_tx);
 | |
| 
 | |
| 	for (i = 0; i < 8; i++) {
 | |
| 		i40e_stat_update32(hw, I40E_GLPRT_PXONRXC(hw->port, i),
 | |
| 				   pf->stat_offsets_loaded,
 | |
| 				   &osd->priority_xon_rx[i],
 | |
| 				   &nsd->priority_xon_rx[i]);
 | |
| 		i40e_stat_update32(hw, I40E_GLPRT_PXONTXC(hw->port, i),
 | |
| 				   pf->stat_offsets_loaded,
 | |
| 				   &osd->priority_xon_tx[i],
 | |
| 				   &nsd->priority_xon_tx[i]);
 | |
| 		i40e_stat_update32(hw, I40E_GLPRT_PXOFFTXC(hw->port, i),
 | |
| 				   pf->stat_offsets_loaded,
 | |
| 				   &osd->priority_xoff_tx[i],
 | |
| 				   &nsd->priority_xoff_tx[i]);
 | |
| 		i40e_stat_update32(hw,
 | |
| 				   I40E_GLPRT_RXON2OFFCNT(hw->port, i),
 | |
| 				   pf->stat_offsets_loaded,
 | |
| 				   &osd->priority_xon_2_xoff[i],
 | |
| 				   &nsd->priority_xon_2_xoff[i]);
 | |
| 	}
 | |
| 
 | |
| 	i40e_stat_update48(hw, I40E_GLPRT_PRC64H(hw->port),
 | |
| 			   I40E_GLPRT_PRC64L(hw->port),
 | |
| 			   pf->stat_offsets_loaded,
 | |
| 			   &osd->rx_size_64, &nsd->rx_size_64);
 | |
| 	i40e_stat_update48(hw, I40E_GLPRT_PRC127H(hw->port),
 | |
| 			   I40E_GLPRT_PRC127L(hw->port),
 | |
| 			   pf->stat_offsets_loaded,
 | |
| 			   &osd->rx_size_127, &nsd->rx_size_127);
 | |
| 	i40e_stat_update48(hw, I40E_GLPRT_PRC255H(hw->port),
 | |
| 			   I40E_GLPRT_PRC255L(hw->port),
 | |
| 			   pf->stat_offsets_loaded,
 | |
| 			   &osd->rx_size_255, &nsd->rx_size_255);
 | |
| 	i40e_stat_update48(hw, I40E_GLPRT_PRC511H(hw->port),
 | |
| 			   I40E_GLPRT_PRC511L(hw->port),
 | |
| 			   pf->stat_offsets_loaded,
 | |
| 			   &osd->rx_size_511, &nsd->rx_size_511);
 | |
| 	i40e_stat_update48(hw, I40E_GLPRT_PRC1023H(hw->port),
 | |
| 			   I40E_GLPRT_PRC1023L(hw->port),
 | |
| 			   pf->stat_offsets_loaded,
 | |
| 			   &osd->rx_size_1023, &nsd->rx_size_1023);
 | |
| 	i40e_stat_update48(hw, I40E_GLPRT_PRC1522H(hw->port),
 | |
| 			   I40E_GLPRT_PRC1522L(hw->port),
 | |
| 			   pf->stat_offsets_loaded,
 | |
| 			   &osd->rx_size_1522, &nsd->rx_size_1522);
 | |
| 	i40e_stat_update48(hw, I40E_GLPRT_PRC9522H(hw->port),
 | |
| 			   I40E_GLPRT_PRC9522L(hw->port),
 | |
| 			   pf->stat_offsets_loaded,
 | |
| 			   &osd->rx_size_big, &nsd->rx_size_big);
 | |
| 
 | |
| 	i40e_stat_update48(hw, I40E_GLPRT_PTC64H(hw->port),
 | |
| 			   I40E_GLPRT_PTC64L(hw->port),
 | |
| 			   pf->stat_offsets_loaded,
 | |
| 			   &osd->tx_size_64, &nsd->tx_size_64);
 | |
| 	i40e_stat_update48(hw, I40E_GLPRT_PTC127H(hw->port),
 | |
| 			   I40E_GLPRT_PTC127L(hw->port),
 | |
| 			   pf->stat_offsets_loaded,
 | |
| 			   &osd->tx_size_127, &nsd->tx_size_127);
 | |
| 	i40e_stat_update48(hw, I40E_GLPRT_PTC255H(hw->port),
 | |
| 			   I40E_GLPRT_PTC255L(hw->port),
 | |
| 			   pf->stat_offsets_loaded,
 | |
| 			   &osd->tx_size_255, &nsd->tx_size_255);
 | |
| 	i40e_stat_update48(hw, I40E_GLPRT_PTC511H(hw->port),
 | |
| 			   I40E_GLPRT_PTC511L(hw->port),
 | |
| 			   pf->stat_offsets_loaded,
 | |
| 			   &osd->tx_size_511, &nsd->tx_size_511);
 | |
| 	i40e_stat_update48(hw, I40E_GLPRT_PTC1023H(hw->port),
 | |
| 			   I40E_GLPRT_PTC1023L(hw->port),
 | |
| 			   pf->stat_offsets_loaded,
 | |
| 			   &osd->tx_size_1023, &nsd->tx_size_1023);
 | |
| 	i40e_stat_update48(hw, I40E_GLPRT_PTC1522H(hw->port),
 | |
| 			   I40E_GLPRT_PTC1522L(hw->port),
 | |
| 			   pf->stat_offsets_loaded,
 | |
| 			   &osd->tx_size_1522, &nsd->tx_size_1522);
 | |
| 	i40e_stat_update48(hw, I40E_GLPRT_PTC9522H(hw->port),
 | |
| 			   I40E_GLPRT_PTC9522L(hw->port),
 | |
| 			   pf->stat_offsets_loaded,
 | |
| 			   &osd->tx_size_big, &nsd->tx_size_big);
 | |
| 
 | |
| 	i40e_stat_update32(hw, I40E_GLPRT_RUC(hw->port),
 | |
| 			   pf->stat_offsets_loaded,
 | |
| 			   &osd->rx_undersize, &nsd->rx_undersize);
 | |
| 	i40e_stat_update32(hw, I40E_GLPRT_RFC(hw->port),
 | |
| 			   pf->stat_offsets_loaded,
 | |
| 			   &osd->rx_fragments, &nsd->rx_fragments);
 | |
| 	i40e_stat_update32(hw, I40E_GLPRT_ROC(hw->port),
 | |
| 			   pf->stat_offsets_loaded,
 | |
| 			   &osd->rx_oversize, &nsd->rx_oversize);
 | |
| 	i40e_stat_update32(hw, I40E_GLPRT_RJC(hw->port),
 | |
| 			   pf->stat_offsets_loaded,
 | |
| 			   &osd->rx_jabber, &nsd->rx_jabber);
 | |
| 
 | |
| 	/* FDIR stats */
 | |
| 	i40e_stat_update32(hw, I40E_GLQF_PCNT(pf->fd_atr_cnt_idx),
 | |
| 			   pf->stat_offsets_loaded,
 | |
| 			   &osd->fd_atr_match, &nsd->fd_atr_match);
 | |
| 	i40e_stat_update32(hw, I40E_GLQF_PCNT(pf->fd_sb_cnt_idx),
 | |
| 			   pf->stat_offsets_loaded,
 | |
| 			   &osd->fd_sb_match, &nsd->fd_sb_match);
 | |
| 
 | |
| 	val = rd32(hw, I40E_PRTPM_EEE_STAT);
 | |
| 	nsd->tx_lpi_status =
 | |
| 		       (val & I40E_PRTPM_EEE_STAT_TX_LPI_STATUS_MASK) >>
 | |
| 			I40E_PRTPM_EEE_STAT_TX_LPI_STATUS_SHIFT;
 | |
| 	nsd->rx_lpi_status =
 | |
| 		       (val & I40E_PRTPM_EEE_STAT_RX_LPI_STATUS_MASK) >>
 | |
| 			I40E_PRTPM_EEE_STAT_RX_LPI_STATUS_SHIFT;
 | |
| 	i40e_stat_update32(hw, I40E_PRTPM_TLPIC,
 | |
| 			   pf->stat_offsets_loaded,
 | |
| 			   &osd->tx_lpi_count, &nsd->tx_lpi_count);
 | |
| 	i40e_stat_update32(hw, I40E_PRTPM_RLPIC,
 | |
| 			   pf->stat_offsets_loaded,
 | |
| 			   &osd->rx_lpi_count, &nsd->rx_lpi_count);
 | |
| 
 | |
| 	pf->stat_offsets_loaded = true;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_update_stats - Update the various statistics counters.
 | |
|  * @vsi: the VSI to be updated
 | |
|  *
 | |
|  * Update the various stats for this VSI and its related entities.
 | |
|  **/
 | |
| void i40e_update_stats(struct i40e_vsi *vsi)
 | |
| {
 | |
| 	struct i40e_pf *pf = vsi->back;
 | |
| 
 | |
| 	if (vsi == pf->vsi[pf->lan_vsi])
 | |
| 		i40e_update_pf_stats(pf);
 | |
| 
 | |
| 	i40e_update_vsi_stats(vsi);
 | |
| #ifdef I40E_FCOE
 | |
| 	i40e_update_fcoe_stats(vsi);
 | |
| #endif
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_find_filter - Search VSI filter list for specific mac/vlan filter
 | |
|  * @vsi: the VSI to be searched
 | |
|  * @macaddr: the MAC address
 | |
|  * @vlan: the vlan
 | |
|  * @is_vf: make sure its a vf filter, else doesn't matter
 | |
|  * @is_netdev: make sure its a netdev filter, else doesn't matter
 | |
|  *
 | |
|  * Returns ptr to the filter object or NULL
 | |
|  **/
 | |
| static struct i40e_mac_filter *i40e_find_filter(struct i40e_vsi *vsi,
 | |
| 						u8 *macaddr, s16 vlan,
 | |
| 						bool is_vf, bool is_netdev)
 | |
| {
 | |
| 	struct i40e_mac_filter *f;
 | |
| 
 | |
| 	if (!vsi || !macaddr)
 | |
| 		return NULL;
 | |
| 
 | |
| 	list_for_each_entry(f, &vsi->mac_filter_list, list) {
 | |
| 		if ((ether_addr_equal(macaddr, f->macaddr)) &&
 | |
| 		    (vlan == f->vlan)    &&
 | |
| 		    (!is_vf || f->is_vf) &&
 | |
| 		    (!is_netdev || f->is_netdev))
 | |
| 			return f;
 | |
| 	}
 | |
| 	return NULL;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_find_mac - Find a mac addr in the macvlan filters list
 | |
|  * @vsi: the VSI to be searched
 | |
|  * @macaddr: the MAC address we are searching for
 | |
|  * @is_vf: make sure its a vf filter, else doesn't matter
 | |
|  * @is_netdev: make sure its a netdev filter, else doesn't matter
 | |
|  *
 | |
|  * Returns the first filter with the provided MAC address or NULL if
 | |
|  * MAC address was not found
 | |
|  **/
 | |
| struct i40e_mac_filter *i40e_find_mac(struct i40e_vsi *vsi, u8 *macaddr,
 | |
| 				      bool is_vf, bool is_netdev)
 | |
| {
 | |
| 	struct i40e_mac_filter *f;
 | |
| 
 | |
| 	if (!vsi || !macaddr)
 | |
| 		return NULL;
 | |
| 
 | |
| 	list_for_each_entry(f, &vsi->mac_filter_list, list) {
 | |
| 		if ((ether_addr_equal(macaddr, f->macaddr)) &&
 | |
| 		    (!is_vf || f->is_vf) &&
 | |
| 		    (!is_netdev || f->is_netdev))
 | |
| 			return f;
 | |
| 	}
 | |
| 	return NULL;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_is_vsi_in_vlan - Check if VSI is in vlan mode
 | |
|  * @vsi: the VSI to be searched
 | |
|  *
 | |
|  * Returns true if VSI is in vlan mode or false otherwise
 | |
|  **/
 | |
| bool i40e_is_vsi_in_vlan(struct i40e_vsi *vsi)
 | |
| {
 | |
| 	struct i40e_mac_filter *f;
 | |
| 
 | |
| 	/* Only -1 for all the filters denotes not in vlan mode
 | |
| 	 * so we have to go through all the list in order to make sure
 | |
| 	 */
 | |
| 	list_for_each_entry(f, &vsi->mac_filter_list, list) {
 | |
| 		if (f->vlan >= 0)
 | |
| 			return true;
 | |
| 	}
 | |
| 
 | |
| 	return false;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_put_mac_in_vlan - Make macvlan filters from macaddrs and vlans
 | |
|  * @vsi: the VSI to be searched
 | |
|  * @macaddr: the mac address to be filtered
 | |
|  * @is_vf: true if it is a vf
 | |
|  * @is_netdev: true if it is a netdev
 | |
|  *
 | |
|  * Goes through all the macvlan filters and adds a
 | |
|  * macvlan filter for each unique vlan that already exists
 | |
|  *
 | |
|  * Returns first filter found on success, else NULL
 | |
|  **/
 | |
| struct i40e_mac_filter *i40e_put_mac_in_vlan(struct i40e_vsi *vsi, u8 *macaddr,
 | |
| 					     bool is_vf, bool is_netdev)
 | |
| {
 | |
| 	struct i40e_mac_filter *f;
 | |
| 
 | |
| 	list_for_each_entry(f, &vsi->mac_filter_list, list) {
 | |
| 		if (!i40e_find_filter(vsi, macaddr, f->vlan,
 | |
| 				      is_vf, is_netdev)) {
 | |
| 			if (!i40e_add_filter(vsi, macaddr, f->vlan,
 | |
| 					     is_vf, is_netdev))
 | |
| 				return NULL;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	return list_first_entry_or_null(&vsi->mac_filter_list,
 | |
| 					struct i40e_mac_filter, list);
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_rm_default_mac_filter - Remove the default MAC filter set by NVM
 | |
|  * @vsi: the PF Main VSI - inappropriate for any other VSI
 | |
|  * @macaddr: the MAC address
 | |
|  **/
 | |
| static void i40e_rm_default_mac_filter(struct i40e_vsi *vsi, u8 *macaddr)
 | |
| {
 | |
| 	struct i40e_aqc_remove_macvlan_element_data element;
 | |
| 	struct i40e_pf *pf = vsi->back;
 | |
| 	i40e_status aq_ret;
 | |
| 
 | |
| 	/* Only appropriate for the PF main VSI */
 | |
| 	if (vsi->type != I40E_VSI_MAIN)
 | |
| 		return;
 | |
| 
 | |
| 	ether_addr_copy(element.mac_addr, macaddr);
 | |
| 	element.vlan_tag = 0;
 | |
| 	element.flags = I40E_AQC_MACVLAN_DEL_PERFECT_MATCH |
 | |
| 			I40E_AQC_MACVLAN_DEL_IGNORE_VLAN;
 | |
| 	aq_ret = i40e_aq_remove_macvlan(&pf->hw, vsi->seid, &element, 1, NULL);
 | |
| 	if (aq_ret)
 | |
| 		dev_err(&pf->pdev->dev, "Could not remove default MAC-VLAN\n");
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_add_filter - Add a mac/vlan filter to the VSI
 | |
|  * @vsi: the VSI to be searched
 | |
|  * @macaddr: the MAC address
 | |
|  * @vlan: the vlan
 | |
|  * @is_vf: make sure its a vf filter, else doesn't matter
 | |
|  * @is_netdev: make sure its a netdev filter, else doesn't matter
 | |
|  *
 | |
|  * Returns ptr to the filter object or NULL when no memory available.
 | |
|  **/
 | |
| struct i40e_mac_filter *i40e_add_filter(struct i40e_vsi *vsi,
 | |
| 					u8 *macaddr, s16 vlan,
 | |
| 					bool is_vf, bool is_netdev)
 | |
| {
 | |
| 	struct i40e_mac_filter *f;
 | |
| 
 | |
| 	if (!vsi || !macaddr)
 | |
| 		return NULL;
 | |
| 
 | |
| 	f = i40e_find_filter(vsi, macaddr, vlan, is_vf, is_netdev);
 | |
| 	if (!f) {
 | |
| 		f = kzalloc(sizeof(*f), GFP_ATOMIC);
 | |
| 		if (!f)
 | |
| 			goto add_filter_out;
 | |
| 
 | |
| 		ether_addr_copy(f->macaddr, macaddr);
 | |
| 		f->vlan = vlan;
 | |
| 		f->changed = true;
 | |
| 
 | |
| 		INIT_LIST_HEAD(&f->list);
 | |
| 		list_add(&f->list, &vsi->mac_filter_list);
 | |
| 	}
 | |
| 
 | |
| 	/* increment counter and add a new flag if needed */
 | |
| 	if (is_vf) {
 | |
| 		if (!f->is_vf) {
 | |
| 			f->is_vf = true;
 | |
| 			f->counter++;
 | |
| 		}
 | |
| 	} else if (is_netdev) {
 | |
| 		if (!f->is_netdev) {
 | |
| 			f->is_netdev = true;
 | |
| 			f->counter++;
 | |
| 		}
 | |
| 	} else {
 | |
| 		f->counter++;
 | |
| 	}
 | |
| 
 | |
| 	/* changed tells sync_filters_subtask to
 | |
| 	 * push the filter down to the firmware
 | |
| 	 */
 | |
| 	if (f->changed) {
 | |
| 		vsi->flags |= I40E_VSI_FLAG_FILTER_CHANGED;
 | |
| 		vsi->back->flags |= I40E_FLAG_FILTER_SYNC;
 | |
| 	}
 | |
| 
 | |
| add_filter_out:
 | |
| 	return f;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_del_filter - Remove a mac/vlan filter from the VSI
 | |
|  * @vsi: the VSI to be searched
 | |
|  * @macaddr: the MAC address
 | |
|  * @vlan: the vlan
 | |
|  * @is_vf: make sure it's a vf filter, else doesn't matter
 | |
|  * @is_netdev: make sure it's a netdev filter, else doesn't matter
 | |
|  **/
 | |
| void i40e_del_filter(struct i40e_vsi *vsi,
 | |
| 		     u8 *macaddr, s16 vlan,
 | |
| 		     bool is_vf, bool is_netdev)
 | |
| {
 | |
| 	struct i40e_mac_filter *f;
 | |
| 
 | |
| 	if (!vsi || !macaddr)
 | |
| 		return;
 | |
| 
 | |
| 	f = i40e_find_filter(vsi, macaddr, vlan, is_vf, is_netdev);
 | |
| 	if (!f || f->counter == 0)
 | |
| 		return;
 | |
| 
 | |
| 	if (is_vf) {
 | |
| 		if (f->is_vf) {
 | |
| 			f->is_vf = false;
 | |
| 			f->counter--;
 | |
| 		}
 | |
| 	} else if (is_netdev) {
 | |
| 		if (f->is_netdev) {
 | |
| 			f->is_netdev = false;
 | |
| 			f->counter--;
 | |
| 		}
 | |
| 	} else {
 | |
| 		/* make sure we don't remove a filter in use by vf or netdev */
 | |
| 		int min_f = 0;
 | |
| 		min_f += (f->is_vf ? 1 : 0);
 | |
| 		min_f += (f->is_netdev ? 1 : 0);
 | |
| 
 | |
| 		if (f->counter > min_f)
 | |
| 			f->counter--;
 | |
| 	}
 | |
| 
 | |
| 	/* counter == 0 tells sync_filters_subtask to
 | |
| 	 * remove the filter from the firmware's list
 | |
| 	 */
 | |
| 	if (f->counter == 0) {
 | |
| 		f->changed = true;
 | |
| 		vsi->flags |= I40E_VSI_FLAG_FILTER_CHANGED;
 | |
| 		vsi->back->flags |= I40E_FLAG_FILTER_SYNC;
 | |
| 	}
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_set_mac - NDO callback to set mac address
 | |
|  * @netdev: network interface device structure
 | |
|  * @p: pointer to an address structure
 | |
|  *
 | |
|  * Returns 0 on success, negative on failure
 | |
|  **/
 | |
| #ifdef I40E_FCOE
 | |
| int i40e_set_mac(struct net_device *netdev, void *p)
 | |
| #else
 | |
| static int i40e_set_mac(struct net_device *netdev, void *p)
 | |
| #endif
 | |
| {
 | |
| 	struct i40e_netdev_priv *np = netdev_priv(netdev);
 | |
| 	struct i40e_vsi *vsi = np->vsi;
 | |
| 	struct sockaddr *addr = p;
 | |
| 	struct i40e_mac_filter *f;
 | |
| 
 | |
| 	if (!is_valid_ether_addr(addr->sa_data))
 | |
| 		return -EADDRNOTAVAIL;
 | |
| 
 | |
| 	netdev_info(netdev, "set mac address=%pM\n", addr->sa_data);
 | |
| 
 | |
| 	if (test_bit(__I40E_DOWN, &vsi->back->state) ||
 | |
| 	    test_bit(__I40E_RESET_RECOVERY_PENDING, &vsi->back->state))
 | |
| 		return -EADDRNOTAVAIL;
 | |
| 
 | |
| 	if (vsi->type == I40E_VSI_MAIN) {
 | |
| 		i40e_status ret;
 | |
| 		ret = i40e_aq_mac_address_write(&vsi->back->hw,
 | |
| 						I40E_AQC_WRITE_TYPE_LAA_WOL,
 | |
| 						addr->sa_data, NULL);
 | |
| 		if (ret) {
 | |
| 			netdev_info(netdev,
 | |
| 				    "Addr change for Main VSI failed: %d\n",
 | |
| 				    ret);
 | |
| 			return -EADDRNOTAVAIL;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	f = i40e_find_mac(vsi, addr->sa_data, false, true);
 | |
| 	if (!f) {
 | |
| 		/* In order to be sure to not drop any packets, add the
 | |
| 		 * new address first then delete the old one.
 | |
| 		 */
 | |
| 		f = i40e_add_filter(vsi, addr->sa_data, I40E_VLAN_ANY,
 | |
| 				    false, false);
 | |
| 		if (!f)
 | |
| 			return -ENOMEM;
 | |
| 
 | |
| 		i40e_sync_vsi_filters(vsi);
 | |
| 		i40e_del_filter(vsi, netdev->dev_addr, I40E_VLAN_ANY,
 | |
| 				false, false);
 | |
| 		i40e_sync_vsi_filters(vsi);
 | |
| 	}
 | |
| 
 | |
| 	f->is_laa = true;
 | |
| 	if (!ether_addr_equal(netdev->dev_addr, addr->sa_data))
 | |
| 		ether_addr_copy(netdev->dev_addr, addr->sa_data);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_vsi_setup_queue_map - Setup a VSI queue map based on enabled_tc
 | |
|  * @vsi: the VSI being setup
 | |
|  * @ctxt: VSI context structure
 | |
|  * @enabled_tc: Enabled TCs bitmap
 | |
|  * @is_add: True if called before Add VSI
 | |
|  *
 | |
|  * Setup VSI queue mapping for enabled traffic classes.
 | |
|  **/
 | |
| #ifdef I40E_FCOE
 | |
| void i40e_vsi_setup_queue_map(struct i40e_vsi *vsi,
 | |
| 			      struct i40e_vsi_context *ctxt,
 | |
| 			      u8 enabled_tc,
 | |
| 			      bool is_add)
 | |
| #else
 | |
| static void i40e_vsi_setup_queue_map(struct i40e_vsi *vsi,
 | |
| 				     struct i40e_vsi_context *ctxt,
 | |
| 				     u8 enabled_tc,
 | |
| 				     bool is_add)
 | |
| #endif
 | |
| {
 | |
| 	struct i40e_pf *pf = vsi->back;
 | |
| 	u16 sections = 0;
 | |
| 	u8 netdev_tc = 0;
 | |
| 	u16 numtc = 0;
 | |
| 	u16 qcount;
 | |
| 	u8 offset;
 | |
| 	u16 qmap;
 | |
| 	int i;
 | |
| 	u16 num_tc_qps = 0;
 | |
| 
 | |
| 	sections = I40E_AQ_VSI_PROP_QUEUE_MAP_VALID;
 | |
| 	offset = 0;
 | |
| 
 | |
| 	if (enabled_tc && (vsi->back->flags & I40E_FLAG_DCB_ENABLED)) {
 | |
| 		/* Find numtc from enabled TC bitmap */
 | |
| 		for (i = 0; i < I40E_MAX_TRAFFIC_CLASS; i++) {
 | |
| 			if (enabled_tc & (1 << i)) /* TC is enabled */
 | |
| 				numtc++;
 | |
| 		}
 | |
| 		if (!numtc) {
 | |
| 			dev_warn(&pf->pdev->dev, "DCB is enabled but no TC enabled, forcing TC0\n");
 | |
| 			numtc = 1;
 | |
| 		}
 | |
| 	} else {
 | |
| 		/* At least TC0 is enabled in case of non-DCB case */
 | |
| 		numtc = 1;
 | |
| 	}
 | |
| 
 | |
| 	vsi->tc_config.numtc = numtc;
 | |
| 	vsi->tc_config.enabled_tc = enabled_tc ? enabled_tc : 1;
 | |
| 	/* Number of queues per enabled TC */
 | |
| 	num_tc_qps = vsi->alloc_queue_pairs/numtc;
 | |
| 	num_tc_qps = min_t(int, num_tc_qps, I40E_MAX_QUEUES_PER_TC);
 | |
| 
 | |
| 	/* Setup queue offset/count for all TCs for given VSI */
 | |
| 	for (i = 0; i < I40E_MAX_TRAFFIC_CLASS; i++) {
 | |
| 		/* See if the given TC is enabled for the given VSI */
 | |
| 		if (vsi->tc_config.enabled_tc & (1 << i)) { /* TC is enabled */
 | |
| 			int pow, num_qps;
 | |
| 
 | |
| 			switch (vsi->type) {
 | |
| 			case I40E_VSI_MAIN:
 | |
| 				qcount = min_t(int, pf->rss_size, num_tc_qps);
 | |
| 				break;
 | |
| #ifdef I40E_FCOE
 | |
| 			case I40E_VSI_FCOE:
 | |
| 				qcount = num_tc_qps;
 | |
| 				break;
 | |
| #endif
 | |
| 			case I40E_VSI_FDIR:
 | |
| 			case I40E_VSI_SRIOV:
 | |
| 			case I40E_VSI_VMDQ2:
 | |
| 			default:
 | |
| 				qcount = num_tc_qps;
 | |
| 				WARN_ON(i != 0);
 | |
| 				break;
 | |
| 			}
 | |
| 			vsi->tc_config.tc_info[i].qoffset = offset;
 | |
| 			vsi->tc_config.tc_info[i].qcount = qcount;
 | |
| 
 | |
| 			/* find the power-of-2 of the number of queue pairs */
 | |
| 			num_qps = qcount;
 | |
| 			pow = 0;
 | |
| 			while (num_qps && ((1 << pow) < qcount)) {
 | |
| 				pow++;
 | |
| 				num_qps >>= 1;
 | |
| 			}
 | |
| 
 | |
| 			vsi->tc_config.tc_info[i].netdev_tc = netdev_tc++;
 | |
| 			qmap =
 | |
| 			    (offset << I40E_AQ_VSI_TC_QUE_OFFSET_SHIFT) |
 | |
| 			    (pow << I40E_AQ_VSI_TC_QUE_NUMBER_SHIFT);
 | |
| 
 | |
| 			offset += qcount;
 | |
| 		} else {
 | |
| 			/* TC is not enabled so set the offset to
 | |
| 			 * default queue and allocate one queue
 | |
| 			 * for the given TC.
 | |
| 			 */
 | |
| 			vsi->tc_config.tc_info[i].qoffset = 0;
 | |
| 			vsi->tc_config.tc_info[i].qcount = 1;
 | |
| 			vsi->tc_config.tc_info[i].netdev_tc = 0;
 | |
| 
 | |
| 			qmap = 0;
 | |
| 		}
 | |
| 		ctxt->info.tc_mapping[i] = cpu_to_le16(qmap);
 | |
| 	}
 | |
| 
 | |
| 	/* Set actual Tx/Rx queue pairs */
 | |
| 	vsi->num_queue_pairs = offset;
 | |
| 
 | |
| 	/* Scheduler section valid can only be set for ADD VSI */
 | |
| 	if (is_add) {
 | |
| 		sections |= I40E_AQ_VSI_PROP_SCHED_VALID;
 | |
| 
 | |
| 		ctxt->info.up_enable_bits = enabled_tc;
 | |
| 	}
 | |
| 	if (vsi->type == I40E_VSI_SRIOV) {
 | |
| 		ctxt->info.mapping_flags |=
 | |
| 				     cpu_to_le16(I40E_AQ_VSI_QUE_MAP_NONCONTIG);
 | |
| 		for (i = 0; i < vsi->num_queue_pairs; i++)
 | |
| 			ctxt->info.queue_mapping[i] =
 | |
| 					       cpu_to_le16(vsi->base_queue + i);
 | |
| 	} else {
 | |
| 		ctxt->info.mapping_flags |=
 | |
| 					cpu_to_le16(I40E_AQ_VSI_QUE_MAP_CONTIG);
 | |
| 		ctxt->info.queue_mapping[0] = cpu_to_le16(vsi->base_queue);
 | |
| 	}
 | |
| 	ctxt->info.valid_sections |= cpu_to_le16(sections);
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_set_rx_mode - NDO callback to set the netdev filters
 | |
|  * @netdev: network interface device structure
 | |
|  **/
 | |
| #ifdef I40E_FCOE
 | |
| void i40e_set_rx_mode(struct net_device *netdev)
 | |
| #else
 | |
| static void i40e_set_rx_mode(struct net_device *netdev)
 | |
| #endif
 | |
| {
 | |
| 	struct i40e_netdev_priv *np = netdev_priv(netdev);
 | |
| 	struct i40e_mac_filter *f, *ftmp;
 | |
| 	struct i40e_vsi *vsi = np->vsi;
 | |
| 	struct netdev_hw_addr *uca;
 | |
| 	struct netdev_hw_addr *mca;
 | |
| 	struct netdev_hw_addr *ha;
 | |
| 
 | |
| 	/* add addr if not already in the filter list */
 | |
| 	netdev_for_each_uc_addr(uca, netdev) {
 | |
| 		if (!i40e_find_mac(vsi, uca->addr, false, true)) {
 | |
| 			if (i40e_is_vsi_in_vlan(vsi))
 | |
| 				i40e_put_mac_in_vlan(vsi, uca->addr,
 | |
| 						     false, true);
 | |
| 			else
 | |
| 				i40e_add_filter(vsi, uca->addr, I40E_VLAN_ANY,
 | |
| 						false, true);
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	netdev_for_each_mc_addr(mca, netdev) {
 | |
| 		if (!i40e_find_mac(vsi, mca->addr, false, true)) {
 | |
| 			if (i40e_is_vsi_in_vlan(vsi))
 | |
| 				i40e_put_mac_in_vlan(vsi, mca->addr,
 | |
| 						     false, true);
 | |
| 			else
 | |
| 				i40e_add_filter(vsi, mca->addr, I40E_VLAN_ANY,
 | |
| 						false, true);
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	/* remove filter if not in netdev list */
 | |
| 	list_for_each_entry_safe(f, ftmp, &vsi->mac_filter_list, list) {
 | |
| 		bool found = false;
 | |
| 
 | |
| 		if (!f->is_netdev)
 | |
| 			continue;
 | |
| 
 | |
| 		if (is_multicast_ether_addr(f->macaddr)) {
 | |
| 			netdev_for_each_mc_addr(mca, netdev) {
 | |
| 				if (ether_addr_equal(mca->addr, f->macaddr)) {
 | |
| 					found = true;
 | |
| 					break;
 | |
| 				}
 | |
| 			}
 | |
| 		} else {
 | |
| 			netdev_for_each_uc_addr(uca, netdev) {
 | |
| 				if (ether_addr_equal(uca->addr, f->macaddr)) {
 | |
| 					found = true;
 | |
| 					break;
 | |
| 				}
 | |
| 			}
 | |
| 
 | |
| 			for_each_dev_addr(netdev, ha) {
 | |
| 				if (ether_addr_equal(ha->addr, f->macaddr)) {
 | |
| 					found = true;
 | |
| 					break;
 | |
| 				}
 | |
| 			}
 | |
| 		}
 | |
| 		if (!found)
 | |
| 			i40e_del_filter(
 | |
| 			   vsi, f->macaddr, I40E_VLAN_ANY, false, true);
 | |
| 	}
 | |
| 
 | |
| 	/* check for other flag changes */
 | |
| 	if (vsi->current_netdev_flags != vsi->netdev->flags) {
 | |
| 		vsi->flags |= I40E_VSI_FLAG_FILTER_CHANGED;
 | |
| 		vsi->back->flags |= I40E_FLAG_FILTER_SYNC;
 | |
| 	}
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_sync_vsi_filters - Update the VSI filter list to the HW
 | |
|  * @vsi: ptr to the VSI
 | |
|  *
 | |
|  * Push any outstanding VSI filter changes through the AdminQ.
 | |
|  *
 | |
|  * Returns 0 or error value
 | |
|  **/
 | |
| int i40e_sync_vsi_filters(struct i40e_vsi *vsi)
 | |
| {
 | |
| 	struct i40e_mac_filter *f, *ftmp;
 | |
| 	bool promisc_forced_on = false;
 | |
| 	bool add_happened = false;
 | |
| 	int filter_list_len = 0;
 | |
| 	u32 changed_flags = 0;
 | |
| 	i40e_status aq_ret = 0;
 | |
| 	struct i40e_pf *pf;
 | |
| 	int num_add = 0;
 | |
| 	int num_del = 0;
 | |
| 	u16 cmd_flags;
 | |
| 
 | |
| 	/* empty array typed pointers, kcalloc later */
 | |
| 	struct i40e_aqc_add_macvlan_element_data *add_list;
 | |
| 	struct i40e_aqc_remove_macvlan_element_data *del_list;
 | |
| 
 | |
| 	while (test_and_set_bit(__I40E_CONFIG_BUSY, &vsi->state))
 | |
| 		usleep_range(1000, 2000);
 | |
| 	pf = vsi->back;
 | |
| 
 | |
| 	if (vsi->netdev) {
 | |
| 		changed_flags = vsi->current_netdev_flags ^ vsi->netdev->flags;
 | |
| 		vsi->current_netdev_flags = vsi->netdev->flags;
 | |
| 	}
 | |
| 
 | |
| 	if (vsi->flags & I40E_VSI_FLAG_FILTER_CHANGED) {
 | |
| 		vsi->flags &= ~I40E_VSI_FLAG_FILTER_CHANGED;
 | |
| 
 | |
| 		filter_list_len = pf->hw.aq.asq_buf_size /
 | |
| 			    sizeof(struct i40e_aqc_remove_macvlan_element_data);
 | |
| 		del_list = kcalloc(filter_list_len,
 | |
| 			    sizeof(struct i40e_aqc_remove_macvlan_element_data),
 | |
| 			    GFP_KERNEL);
 | |
| 		if (!del_list)
 | |
| 			return -ENOMEM;
 | |
| 
 | |
| 		list_for_each_entry_safe(f, ftmp, &vsi->mac_filter_list, list) {
 | |
| 			if (!f->changed)
 | |
| 				continue;
 | |
| 
 | |
| 			if (f->counter != 0)
 | |
| 				continue;
 | |
| 			f->changed = false;
 | |
| 			cmd_flags = 0;
 | |
| 
 | |
| 			/* add to delete list */
 | |
| 			ether_addr_copy(del_list[num_del].mac_addr, f->macaddr);
 | |
| 			del_list[num_del].vlan_tag =
 | |
| 				cpu_to_le16((u16)(f->vlan ==
 | |
| 					    I40E_VLAN_ANY ? 0 : f->vlan));
 | |
| 
 | |
| 			cmd_flags |= I40E_AQC_MACVLAN_DEL_PERFECT_MATCH;
 | |
| 			del_list[num_del].flags = cmd_flags;
 | |
| 			num_del++;
 | |
| 
 | |
| 			/* unlink from filter list */
 | |
| 			list_del(&f->list);
 | |
| 			kfree(f);
 | |
| 
 | |
| 			/* flush a full buffer */
 | |
| 			if (num_del == filter_list_len) {
 | |
| 				aq_ret = i40e_aq_remove_macvlan(&pf->hw,
 | |
| 					    vsi->seid, del_list, num_del,
 | |
| 					    NULL);
 | |
| 				num_del = 0;
 | |
| 				memset(del_list, 0, sizeof(*del_list));
 | |
| 
 | |
| 				if (aq_ret &&
 | |
| 				    pf->hw.aq.asq_last_status !=
 | |
| 							      I40E_AQ_RC_ENOENT)
 | |
| 					dev_info(&pf->pdev->dev,
 | |
| 						 "ignoring delete macvlan error, err %d, aq_err %d while flushing a full buffer\n",
 | |
| 						 aq_ret,
 | |
| 						 pf->hw.aq.asq_last_status);
 | |
| 			}
 | |
| 		}
 | |
| 		if (num_del) {
 | |
| 			aq_ret = i40e_aq_remove_macvlan(&pf->hw, vsi->seid,
 | |
| 						     del_list, num_del, NULL);
 | |
| 			num_del = 0;
 | |
| 
 | |
| 			if (aq_ret &&
 | |
| 			    pf->hw.aq.asq_last_status != I40E_AQ_RC_ENOENT)
 | |
| 				dev_info(&pf->pdev->dev,
 | |
| 					 "ignoring delete macvlan error, err %d, aq_err %d\n",
 | |
| 					 aq_ret, pf->hw.aq.asq_last_status);
 | |
| 		}
 | |
| 
 | |
| 		kfree(del_list);
 | |
| 		del_list = NULL;
 | |
| 
 | |
| 		/* do all the adds now */
 | |
| 		filter_list_len = pf->hw.aq.asq_buf_size /
 | |
| 			       sizeof(struct i40e_aqc_add_macvlan_element_data),
 | |
| 		add_list = kcalloc(filter_list_len,
 | |
| 			       sizeof(struct i40e_aqc_add_macvlan_element_data),
 | |
| 			       GFP_KERNEL);
 | |
| 		if (!add_list)
 | |
| 			return -ENOMEM;
 | |
| 
 | |
| 		list_for_each_entry_safe(f, ftmp, &vsi->mac_filter_list, list) {
 | |
| 			if (!f->changed)
 | |
| 				continue;
 | |
| 
 | |
| 			if (f->counter == 0)
 | |
| 				continue;
 | |
| 			f->changed = false;
 | |
| 			add_happened = true;
 | |
| 			cmd_flags = 0;
 | |
| 
 | |
| 			/* add to add array */
 | |
| 			ether_addr_copy(add_list[num_add].mac_addr, f->macaddr);
 | |
| 			add_list[num_add].vlan_tag =
 | |
| 				cpu_to_le16(
 | |
| 				 (u16)(f->vlan == I40E_VLAN_ANY ? 0 : f->vlan));
 | |
| 			add_list[num_add].queue_number = 0;
 | |
| 
 | |
| 			cmd_flags |= I40E_AQC_MACVLAN_ADD_PERFECT_MATCH;
 | |
| 			add_list[num_add].flags = cpu_to_le16(cmd_flags);
 | |
| 			num_add++;
 | |
| 
 | |
| 			/* flush a full buffer */
 | |
| 			if (num_add == filter_list_len) {
 | |
| 				aq_ret = i40e_aq_add_macvlan(&pf->hw, vsi->seid,
 | |
| 							     add_list, num_add,
 | |
| 							     NULL);
 | |
| 				num_add = 0;
 | |
| 
 | |
| 				if (aq_ret)
 | |
| 					break;
 | |
| 				memset(add_list, 0, sizeof(*add_list));
 | |
| 			}
 | |
| 		}
 | |
| 		if (num_add) {
 | |
| 			aq_ret = i40e_aq_add_macvlan(&pf->hw, vsi->seid,
 | |
| 						     add_list, num_add, NULL);
 | |
| 			num_add = 0;
 | |
| 		}
 | |
| 		kfree(add_list);
 | |
| 		add_list = NULL;
 | |
| 
 | |
| 		if (add_happened && (!aq_ret)) {
 | |
| 			/* do nothing */;
 | |
| 		} else if (add_happened && (aq_ret)) {
 | |
| 			dev_info(&pf->pdev->dev,
 | |
| 				 "add filter failed, err %d, aq_err %d\n",
 | |
| 				 aq_ret, pf->hw.aq.asq_last_status);
 | |
| 			if ((pf->hw.aq.asq_last_status == I40E_AQ_RC_ENOSPC) &&
 | |
| 			    !test_bit(__I40E_FILTER_OVERFLOW_PROMISC,
 | |
| 				      &vsi->state)) {
 | |
| 				promisc_forced_on = true;
 | |
| 				set_bit(__I40E_FILTER_OVERFLOW_PROMISC,
 | |
| 					&vsi->state);
 | |
| 				dev_info(&pf->pdev->dev, "promiscuous mode forced on\n");
 | |
| 			}
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	/* check for changes in promiscuous modes */
 | |
| 	if (changed_flags & IFF_ALLMULTI) {
 | |
| 		bool cur_multipromisc;
 | |
| 		cur_multipromisc = !!(vsi->current_netdev_flags & IFF_ALLMULTI);
 | |
| 		aq_ret = i40e_aq_set_vsi_multicast_promiscuous(&vsi->back->hw,
 | |
| 							       vsi->seid,
 | |
| 							       cur_multipromisc,
 | |
| 							       NULL);
 | |
| 		if (aq_ret)
 | |
| 			dev_info(&pf->pdev->dev,
 | |
| 				 "set multi promisc failed, err %d, aq_err %d\n",
 | |
| 				 aq_ret, pf->hw.aq.asq_last_status);
 | |
| 	}
 | |
| 	if ((changed_flags & IFF_PROMISC) || promisc_forced_on) {
 | |
| 		bool cur_promisc;
 | |
| 		cur_promisc = (!!(vsi->current_netdev_flags & IFF_PROMISC) ||
 | |
| 			       test_bit(__I40E_FILTER_OVERFLOW_PROMISC,
 | |
| 					&vsi->state));
 | |
| 		aq_ret = i40e_aq_set_vsi_unicast_promiscuous(&vsi->back->hw,
 | |
| 							     vsi->seid,
 | |
| 							     cur_promisc, NULL);
 | |
| 		if (aq_ret)
 | |
| 			dev_info(&pf->pdev->dev,
 | |
| 				 "set uni promisc failed, err %d, aq_err %d\n",
 | |
| 				 aq_ret, pf->hw.aq.asq_last_status);
 | |
| 		aq_ret = i40e_aq_set_vsi_broadcast(&vsi->back->hw,
 | |
| 						   vsi->seid,
 | |
| 						   cur_promisc, NULL);
 | |
| 		if (aq_ret)
 | |
| 			dev_info(&pf->pdev->dev,
 | |
| 				 "set brdcast promisc failed, err %d, aq_err %d\n",
 | |
| 				 aq_ret, pf->hw.aq.asq_last_status);
 | |
| 	}
 | |
| 
 | |
| 	clear_bit(__I40E_CONFIG_BUSY, &vsi->state);
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_sync_filters_subtask - Sync the VSI filter list with HW
 | |
|  * @pf: board private structure
 | |
|  **/
 | |
| static void i40e_sync_filters_subtask(struct i40e_pf *pf)
 | |
| {
 | |
| 	int v;
 | |
| 
 | |
| 	if (!pf || !(pf->flags & I40E_FLAG_FILTER_SYNC))
 | |
| 		return;
 | |
| 	pf->flags &= ~I40E_FLAG_FILTER_SYNC;
 | |
| 
 | |
| 	for (v = 0; v < pf->num_alloc_vsi; v++) {
 | |
| 		if (pf->vsi[v] &&
 | |
| 		    (pf->vsi[v]->flags & I40E_VSI_FLAG_FILTER_CHANGED))
 | |
| 			i40e_sync_vsi_filters(pf->vsi[v]);
 | |
| 	}
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_change_mtu - NDO callback to change the Maximum Transfer Unit
 | |
|  * @netdev: network interface device structure
 | |
|  * @new_mtu: new value for maximum frame size
 | |
|  *
 | |
|  * Returns 0 on success, negative on failure
 | |
|  **/
 | |
| static int i40e_change_mtu(struct net_device *netdev, int new_mtu)
 | |
| {
 | |
| 	struct i40e_netdev_priv *np = netdev_priv(netdev);
 | |
| 	int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN;
 | |
| 	struct i40e_vsi *vsi = np->vsi;
 | |
| 
 | |
| 	/* MTU < 68 is an error and causes problems on some kernels */
 | |
| 	if ((new_mtu < 68) || (max_frame > I40E_MAX_RXBUFFER))
 | |
| 		return -EINVAL;
 | |
| 
 | |
| 	netdev_info(netdev, "changing MTU from %d to %d\n",
 | |
| 		    netdev->mtu, new_mtu);
 | |
| 	netdev->mtu = new_mtu;
 | |
| 	if (netif_running(netdev))
 | |
| 		i40e_vsi_reinit_locked(vsi);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_ioctl - Access the hwtstamp interface
 | |
|  * @netdev: network interface device structure
 | |
|  * @ifr: interface request data
 | |
|  * @cmd: ioctl command
 | |
|  **/
 | |
| int i40e_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
 | |
| {
 | |
| 	struct i40e_netdev_priv *np = netdev_priv(netdev);
 | |
| 	struct i40e_pf *pf = np->vsi->back;
 | |
| 
 | |
| 	switch (cmd) {
 | |
| 	case SIOCGHWTSTAMP:
 | |
| 		return i40e_ptp_get_ts_config(pf, ifr);
 | |
| 	case SIOCSHWTSTAMP:
 | |
| 		return i40e_ptp_set_ts_config(pf, ifr);
 | |
| 	default:
 | |
| 		return -EOPNOTSUPP;
 | |
| 	}
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_vlan_stripping_enable - Turn on vlan stripping for the VSI
 | |
|  * @vsi: the vsi being adjusted
 | |
|  **/
 | |
| void i40e_vlan_stripping_enable(struct i40e_vsi *vsi)
 | |
| {
 | |
| 	struct i40e_vsi_context ctxt;
 | |
| 	i40e_status ret;
 | |
| 
 | |
| 	if ((vsi->info.valid_sections &
 | |
| 	     cpu_to_le16(I40E_AQ_VSI_PROP_VLAN_VALID)) &&
 | |
| 	    ((vsi->info.port_vlan_flags & I40E_AQ_VSI_PVLAN_MODE_MASK) == 0))
 | |
| 		return;  /* already enabled */
 | |
| 
 | |
| 	vsi->info.valid_sections = cpu_to_le16(I40E_AQ_VSI_PROP_VLAN_VALID);
 | |
| 	vsi->info.port_vlan_flags = I40E_AQ_VSI_PVLAN_MODE_ALL |
 | |
| 				    I40E_AQ_VSI_PVLAN_EMOD_STR_BOTH;
 | |
| 
 | |
| 	ctxt.seid = vsi->seid;
 | |
| 	memcpy(&ctxt.info, &vsi->info, sizeof(vsi->info));
 | |
| 	ret = i40e_aq_update_vsi_params(&vsi->back->hw, &ctxt, NULL);
 | |
| 	if (ret) {
 | |
| 		dev_info(&vsi->back->pdev->dev,
 | |
| 			 "%s: update vsi failed, aq_err=%d\n",
 | |
| 			 __func__, vsi->back->hw.aq.asq_last_status);
 | |
| 	}
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_vlan_stripping_disable - Turn off vlan stripping for the VSI
 | |
|  * @vsi: the vsi being adjusted
 | |
|  **/
 | |
| void i40e_vlan_stripping_disable(struct i40e_vsi *vsi)
 | |
| {
 | |
| 	struct i40e_vsi_context ctxt;
 | |
| 	i40e_status ret;
 | |
| 
 | |
| 	if ((vsi->info.valid_sections &
 | |
| 	     cpu_to_le16(I40E_AQ_VSI_PROP_VLAN_VALID)) &&
 | |
| 	    ((vsi->info.port_vlan_flags & I40E_AQ_VSI_PVLAN_EMOD_MASK) ==
 | |
| 	     I40E_AQ_VSI_PVLAN_EMOD_MASK))
 | |
| 		return;  /* already disabled */
 | |
| 
 | |
| 	vsi->info.valid_sections = cpu_to_le16(I40E_AQ_VSI_PROP_VLAN_VALID);
 | |
| 	vsi->info.port_vlan_flags = I40E_AQ_VSI_PVLAN_MODE_ALL |
 | |
| 				    I40E_AQ_VSI_PVLAN_EMOD_NOTHING;
 | |
| 
 | |
| 	ctxt.seid = vsi->seid;
 | |
| 	memcpy(&ctxt.info, &vsi->info, sizeof(vsi->info));
 | |
| 	ret = i40e_aq_update_vsi_params(&vsi->back->hw, &ctxt, NULL);
 | |
| 	if (ret) {
 | |
| 		dev_info(&vsi->back->pdev->dev,
 | |
| 			 "%s: update vsi failed, aq_err=%d\n",
 | |
| 			 __func__, vsi->back->hw.aq.asq_last_status);
 | |
| 	}
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_vlan_rx_register - Setup or shutdown vlan offload
 | |
|  * @netdev: network interface to be adjusted
 | |
|  * @features: netdev features to test if VLAN offload is enabled or not
 | |
|  **/
 | |
| static void i40e_vlan_rx_register(struct net_device *netdev, u32 features)
 | |
| {
 | |
| 	struct i40e_netdev_priv *np = netdev_priv(netdev);
 | |
| 	struct i40e_vsi *vsi = np->vsi;
 | |
| 
 | |
| 	if (features & NETIF_F_HW_VLAN_CTAG_RX)
 | |
| 		i40e_vlan_stripping_enable(vsi);
 | |
| 	else
 | |
| 		i40e_vlan_stripping_disable(vsi);
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_vsi_add_vlan - Add vsi membership for given vlan
 | |
|  * @vsi: the vsi being configured
 | |
|  * @vid: vlan id to be added (0 = untagged only , -1 = any)
 | |
|  **/
 | |
| int i40e_vsi_add_vlan(struct i40e_vsi *vsi, s16 vid)
 | |
| {
 | |
| 	struct i40e_mac_filter *f, *add_f;
 | |
| 	bool is_netdev, is_vf;
 | |
| 
 | |
| 	is_vf = (vsi->type == I40E_VSI_SRIOV);
 | |
| 	is_netdev = !!(vsi->netdev);
 | |
| 
 | |
| 	if (is_netdev) {
 | |
| 		add_f = i40e_add_filter(vsi, vsi->netdev->dev_addr, vid,
 | |
| 					is_vf, is_netdev);
 | |
| 		if (!add_f) {
 | |
| 			dev_info(&vsi->back->pdev->dev,
 | |
| 				 "Could not add vlan filter %d for %pM\n",
 | |
| 				 vid, vsi->netdev->dev_addr);
 | |
| 			return -ENOMEM;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	list_for_each_entry(f, &vsi->mac_filter_list, list) {
 | |
| 		add_f = i40e_add_filter(vsi, f->macaddr, vid, is_vf, is_netdev);
 | |
| 		if (!add_f) {
 | |
| 			dev_info(&vsi->back->pdev->dev,
 | |
| 				 "Could not add vlan filter %d for %pM\n",
 | |
| 				 vid, f->macaddr);
 | |
| 			return -ENOMEM;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	/* Now if we add a vlan tag, make sure to check if it is the first
 | |
| 	 * tag (i.e. a "tag" -1 does exist) and if so replace the -1 "tag"
 | |
| 	 * with 0, so we now accept untagged and specified tagged traffic
 | |
| 	 * (and not any taged and untagged)
 | |
| 	 */
 | |
| 	if (vid > 0) {
 | |
| 		if (is_netdev && i40e_find_filter(vsi, vsi->netdev->dev_addr,
 | |
| 						  I40E_VLAN_ANY,
 | |
| 						  is_vf, is_netdev)) {
 | |
| 			i40e_del_filter(vsi, vsi->netdev->dev_addr,
 | |
| 					I40E_VLAN_ANY, is_vf, is_netdev);
 | |
| 			add_f = i40e_add_filter(vsi, vsi->netdev->dev_addr, 0,
 | |
| 						is_vf, is_netdev);
 | |
| 			if (!add_f) {
 | |
| 				dev_info(&vsi->back->pdev->dev,
 | |
| 					 "Could not add filter 0 for %pM\n",
 | |
| 					 vsi->netdev->dev_addr);
 | |
| 				return -ENOMEM;
 | |
| 			}
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	/* Do not assume that I40E_VLAN_ANY should be reset to VLAN 0 */
 | |
| 	if (vid > 0 && !vsi->info.pvid) {
 | |
| 		list_for_each_entry(f, &vsi->mac_filter_list, list) {
 | |
| 			if (i40e_find_filter(vsi, f->macaddr, I40E_VLAN_ANY,
 | |
| 					     is_vf, is_netdev)) {
 | |
| 				i40e_del_filter(vsi, f->macaddr, I40E_VLAN_ANY,
 | |
| 						is_vf, is_netdev);
 | |
| 				add_f = i40e_add_filter(vsi, f->macaddr,
 | |
| 							0, is_vf, is_netdev);
 | |
| 				if (!add_f) {
 | |
| 					dev_info(&vsi->back->pdev->dev,
 | |
| 						 "Could not add filter 0 for %pM\n",
 | |
| 						 f->macaddr);
 | |
| 					return -ENOMEM;
 | |
| 				}
 | |
| 			}
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	if (test_bit(__I40E_DOWN, &vsi->back->state) ||
 | |
| 	    test_bit(__I40E_RESET_RECOVERY_PENDING, &vsi->back->state))
 | |
| 		return 0;
 | |
| 
 | |
| 	return i40e_sync_vsi_filters(vsi);
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_vsi_kill_vlan - Remove vsi membership for given vlan
 | |
|  * @vsi: the vsi being configured
 | |
|  * @vid: vlan id to be removed (0 = untagged only , -1 = any)
 | |
|  *
 | |
|  * Return: 0 on success or negative otherwise
 | |
|  **/
 | |
| int i40e_vsi_kill_vlan(struct i40e_vsi *vsi, s16 vid)
 | |
| {
 | |
| 	struct net_device *netdev = vsi->netdev;
 | |
| 	struct i40e_mac_filter *f, *add_f;
 | |
| 	bool is_vf, is_netdev;
 | |
| 	int filter_count = 0;
 | |
| 
 | |
| 	is_vf = (vsi->type == I40E_VSI_SRIOV);
 | |
| 	is_netdev = !!(netdev);
 | |
| 
 | |
| 	if (is_netdev)
 | |
| 		i40e_del_filter(vsi, netdev->dev_addr, vid, is_vf, is_netdev);
 | |
| 
 | |
| 	list_for_each_entry(f, &vsi->mac_filter_list, list)
 | |
| 		i40e_del_filter(vsi, f->macaddr, vid, is_vf, is_netdev);
 | |
| 
 | |
| 	/* go through all the filters for this VSI and if there is only
 | |
| 	 * vid == 0 it means there are no other filters, so vid 0 must
 | |
| 	 * be replaced with -1. This signifies that we should from now
 | |
| 	 * on accept any traffic (with any tag present, or untagged)
 | |
| 	 */
 | |
| 	list_for_each_entry(f, &vsi->mac_filter_list, list) {
 | |
| 		if (is_netdev) {
 | |
| 			if (f->vlan &&
 | |
| 			    ether_addr_equal(netdev->dev_addr, f->macaddr))
 | |
| 				filter_count++;
 | |
| 		}
 | |
| 
 | |
| 		if (f->vlan)
 | |
| 			filter_count++;
 | |
| 	}
 | |
| 
 | |
| 	if (!filter_count && is_netdev) {
 | |
| 		i40e_del_filter(vsi, netdev->dev_addr, 0, is_vf, is_netdev);
 | |
| 		f = i40e_add_filter(vsi, netdev->dev_addr, I40E_VLAN_ANY,
 | |
| 				    is_vf, is_netdev);
 | |
| 		if (!f) {
 | |
| 			dev_info(&vsi->back->pdev->dev,
 | |
| 				 "Could not add filter %d for %pM\n",
 | |
| 				 I40E_VLAN_ANY, netdev->dev_addr);
 | |
| 			return -ENOMEM;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	if (!filter_count) {
 | |
| 		list_for_each_entry(f, &vsi->mac_filter_list, list) {
 | |
| 			i40e_del_filter(vsi, f->macaddr, 0, is_vf, is_netdev);
 | |
| 			add_f = i40e_add_filter(vsi, f->macaddr, I40E_VLAN_ANY,
 | |
| 					    is_vf, is_netdev);
 | |
| 			if (!add_f) {
 | |
| 				dev_info(&vsi->back->pdev->dev,
 | |
| 					 "Could not add filter %d for %pM\n",
 | |
| 					 I40E_VLAN_ANY, f->macaddr);
 | |
| 				return -ENOMEM;
 | |
| 			}
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	if (test_bit(__I40E_DOWN, &vsi->back->state) ||
 | |
| 	    test_bit(__I40E_RESET_RECOVERY_PENDING, &vsi->back->state))
 | |
| 		return 0;
 | |
| 
 | |
| 	return i40e_sync_vsi_filters(vsi);
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_vlan_rx_add_vid - Add a vlan id filter to HW offload
 | |
|  * @netdev: network interface to be adjusted
 | |
|  * @vid: vlan id to be added
 | |
|  *
 | |
|  * net_device_ops implementation for adding vlan ids
 | |
|  **/
 | |
| #ifdef I40E_FCOE
 | |
| int i40e_vlan_rx_add_vid(struct net_device *netdev,
 | |
| 			 __always_unused __be16 proto, u16 vid)
 | |
| #else
 | |
| static int i40e_vlan_rx_add_vid(struct net_device *netdev,
 | |
| 				__always_unused __be16 proto, u16 vid)
 | |
| #endif
 | |
| {
 | |
| 	struct i40e_netdev_priv *np = netdev_priv(netdev);
 | |
| 	struct i40e_vsi *vsi = np->vsi;
 | |
| 	int ret = 0;
 | |
| 
 | |
| 	if (vid > 4095)
 | |
| 		return -EINVAL;
 | |
| 
 | |
| 	netdev_info(netdev, "adding %pM vid=%d\n", netdev->dev_addr, vid);
 | |
| 
 | |
| 	/* If the network stack called us with vid = 0 then
 | |
| 	 * it is asking to receive priority tagged packets with
 | |
| 	 * vlan id 0.  Our HW receives them by default when configured
 | |
| 	 * to receive untagged packets so there is no need to add an
 | |
| 	 * extra filter for vlan 0 tagged packets.
 | |
| 	 */
 | |
| 	if (vid)
 | |
| 		ret = i40e_vsi_add_vlan(vsi, vid);
 | |
| 
 | |
| 	if (!ret && (vid < VLAN_N_VID))
 | |
| 		set_bit(vid, vsi->active_vlans);
 | |
| 
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_vlan_rx_kill_vid - Remove a vlan id filter from HW offload
 | |
|  * @netdev: network interface to be adjusted
 | |
|  * @vid: vlan id to be removed
 | |
|  *
 | |
|  * net_device_ops implementation for removing vlan ids
 | |
|  **/
 | |
| #ifdef I40E_FCOE
 | |
| int i40e_vlan_rx_kill_vid(struct net_device *netdev,
 | |
| 			  __always_unused __be16 proto, u16 vid)
 | |
| #else
 | |
| static int i40e_vlan_rx_kill_vid(struct net_device *netdev,
 | |
| 				 __always_unused __be16 proto, u16 vid)
 | |
| #endif
 | |
| {
 | |
| 	struct i40e_netdev_priv *np = netdev_priv(netdev);
 | |
| 	struct i40e_vsi *vsi = np->vsi;
 | |
| 
 | |
| 	netdev_info(netdev, "removing %pM vid=%d\n", netdev->dev_addr, vid);
 | |
| 
 | |
| 	/* return code is ignored as there is nothing a user
 | |
| 	 * can do about failure to remove and a log message was
 | |
| 	 * already printed from the other function
 | |
| 	 */
 | |
| 	i40e_vsi_kill_vlan(vsi, vid);
 | |
| 
 | |
| 	clear_bit(vid, vsi->active_vlans);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_restore_vlan - Reinstate vlans when vsi/netdev comes back up
 | |
|  * @vsi: the vsi being brought back up
 | |
|  **/
 | |
| static void i40e_restore_vlan(struct i40e_vsi *vsi)
 | |
| {
 | |
| 	u16 vid;
 | |
| 
 | |
| 	if (!vsi->netdev)
 | |
| 		return;
 | |
| 
 | |
| 	i40e_vlan_rx_register(vsi->netdev, vsi->netdev->features);
 | |
| 
 | |
| 	for_each_set_bit(vid, vsi->active_vlans, VLAN_N_VID)
 | |
| 		i40e_vlan_rx_add_vid(vsi->netdev, htons(ETH_P_8021Q),
 | |
| 				     vid);
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_vsi_add_pvid - Add pvid for the VSI
 | |
|  * @vsi: the vsi being adjusted
 | |
|  * @vid: the vlan id to set as a PVID
 | |
|  **/
 | |
| int i40e_vsi_add_pvid(struct i40e_vsi *vsi, u16 vid)
 | |
| {
 | |
| 	struct i40e_vsi_context ctxt;
 | |
| 	i40e_status aq_ret;
 | |
| 
 | |
| 	vsi->info.valid_sections = cpu_to_le16(I40E_AQ_VSI_PROP_VLAN_VALID);
 | |
| 	vsi->info.pvid = cpu_to_le16(vid);
 | |
| 	vsi->info.port_vlan_flags = I40E_AQ_VSI_PVLAN_MODE_TAGGED |
 | |
| 				    I40E_AQ_VSI_PVLAN_INSERT_PVID |
 | |
| 				    I40E_AQ_VSI_PVLAN_EMOD_STR;
 | |
| 
 | |
| 	ctxt.seid = vsi->seid;
 | |
| 	memcpy(&ctxt.info, &vsi->info, sizeof(vsi->info));
 | |
| 	aq_ret = i40e_aq_update_vsi_params(&vsi->back->hw, &ctxt, NULL);
 | |
| 	if (aq_ret) {
 | |
| 		dev_info(&vsi->back->pdev->dev,
 | |
| 			 "%s: update vsi failed, aq_err=%d\n",
 | |
| 			 __func__, vsi->back->hw.aq.asq_last_status);
 | |
| 		return -ENOENT;
 | |
| 	}
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_vsi_remove_pvid - Remove the pvid from the VSI
 | |
|  * @vsi: the vsi being adjusted
 | |
|  *
 | |
|  * Just use the vlan_rx_register() service to put it back to normal
 | |
|  **/
 | |
| void i40e_vsi_remove_pvid(struct i40e_vsi *vsi)
 | |
| {
 | |
| 	i40e_vlan_stripping_disable(vsi);
 | |
| 
 | |
| 	vsi->info.pvid = 0;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_vsi_setup_tx_resources - Allocate VSI Tx queue resources
 | |
|  * @vsi: ptr to the VSI
 | |
|  *
 | |
|  * If this function returns with an error, then it's possible one or
 | |
|  * more of the rings is populated (while the rest are not).  It is the
 | |
|  * callers duty to clean those orphaned rings.
 | |
|  *
 | |
|  * Return 0 on success, negative on failure
 | |
|  **/
 | |
| static int i40e_vsi_setup_tx_resources(struct i40e_vsi *vsi)
 | |
| {
 | |
| 	int i, err = 0;
 | |
| 
 | |
| 	for (i = 0; i < vsi->num_queue_pairs && !err; i++)
 | |
| 		err = i40e_setup_tx_descriptors(vsi->tx_rings[i]);
 | |
| 
 | |
| 	return err;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_vsi_free_tx_resources - Free Tx resources for VSI queues
 | |
|  * @vsi: ptr to the VSI
 | |
|  *
 | |
|  * Free VSI's transmit software resources
 | |
|  **/
 | |
| static void i40e_vsi_free_tx_resources(struct i40e_vsi *vsi)
 | |
| {
 | |
| 	int i;
 | |
| 
 | |
| 	if (!vsi->tx_rings)
 | |
| 		return;
 | |
| 
 | |
| 	for (i = 0; i < vsi->num_queue_pairs; i++)
 | |
| 		if (vsi->tx_rings[i] && vsi->tx_rings[i]->desc)
 | |
| 			i40e_free_tx_resources(vsi->tx_rings[i]);
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_vsi_setup_rx_resources - Allocate VSI queues Rx resources
 | |
|  * @vsi: ptr to the VSI
 | |
|  *
 | |
|  * If this function returns with an error, then it's possible one or
 | |
|  * more of the rings is populated (while the rest are not).  It is the
 | |
|  * callers duty to clean those orphaned rings.
 | |
|  *
 | |
|  * Return 0 on success, negative on failure
 | |
|  **/
 | |
| static int i40e_vsi_setup_rx_resources(struct i40e_vsi *vsi)
 | |
| {
 | |
| 	int i, err = 0;
 | |
| 
 | |
| 	for (i = 0; i < vsi->num_queue_pairs && !err; i++)
 | |
| 		err = i40e_setup_rx_descriptors(vsi->rx_rings[i]);
 | |
| #ifdef I40E_FCOE
 | |
| 	i40e_fcoe_setup_ddp_resources(vsi);
 | |
| #endif
 | |
| 	return err;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_vsi_free_rx_resources - Free Rx Resources for VSI queues
 | |
|  * @vsi: ptr to the VSI
 | |
|  *
 | |
|  * Free all receive software resources
 | |
|  **/
 | |
| static void i40e_vsi_free_rx_resources(struct i40e_vsi *vsi)
 | |
| {
 | |
| 	int i;
 | |
| 
 | |
| 	if (!vsi->rx_rings)
 | |
| 		return;
 | |
| 
 | |
| 	for (i = 0; i < vsi->num_queue_pairs; i++)
 | |
| 		if (vsi->rx_rings[i] && vsi->rx_rings[i]->desc)
 | |
| 			i40e_free_rx_resources(vsi->rx_rings[i]);
 | |
| #ifdef I40E_FCOE
 | |
| 	i40e_fcoe_free_ddp_resources(vsi);
 | |
| #endif
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_configure_tx_ring - Configure a transmit ring context and rest
 | |
|  * @ring: The Tx ring to configure
 | |
|  *
 | |
|  * Configure the Tx descriptor ring in the HMC context.
 | |
|  **/
 | |
| static int i40e_configure_tx_ring(struct i40e_ring *ring)
 | |
| {
 | |
| 	struct i40e_vsi *vsi = ring->vsi;
 | |
| 	u16 pf_q = vsi->base_queue + ring->queue_index;
 | |
| 	struct i40e_hw *hw = &vsi->back->hw;
 | |
| 	struct i40e_hmc_obj_txq tx_ctx;
 | |
| 	i40e_status err = 0;
 | |
| 	u32 qtx_ctl = 0;
 | |
| 
 | |
| 	/* some ATR related tx ring init */
 | |
| 	if (vsi->back->flags & I40E_FLAG_FD_ATR_ENABLED) {
 | |
| 		ring->atr_sample_rate = vsi->back->atr_sample_rate;
 | |
| 		ring->atr_count = 0;
 | |
| 	} else {
 | |
| 		ring->atr_sample_rate = 0;
 | |
| 	}
 | |
| 
 | |
| 	/* initialize XPS */
 | |
| 	if (ring->q_vector && ring->netdev &&
 | |
| 	    vsi->tc_config.numtc <= 1 &&
 | |
| 	    !test_and_set_bit(__I40E_TX_XPS_INIT_DONE, &ring->state))
 | |
| 		netif_set_xps_queue(ring->netdev,
 | |
| 				    &ring->q_vector->affinity_mask,
 | |
| 				    ring->queue_index);
 | |
| 
 | |
| 	/* clear the context structure first */
 | |
| 	memset(&tx_ctx, 0, sizeof(tx_ctx));
 | |
| 
 | |
| 	tx_ctx.new_context = 1;
 | |
| 	tx_ctx.base = (ring->dma / 128);
 | |
| 	tx_ctx.qlen = ring->count;
 | |
| 	tx_ctx.fd_ena = !!(vsi->back->flags & (I40E_FLAG_FD_SB_ENABLED |
 | |
| 					       I40E_FLAG_FD_ATR_ENABLED));
 | |
| #ifdef I40E_FCOE
 | |
| 	tx_ctx.fc_ena = (vsi->type == I40E_VSI_FCOE);
 | |
| #endif
 | |
| 	tx_ctx.timesync_ena = !!(vsi->back->flags & I40E_FLAG_PTP);
 | |
| 	/* FDIR VSI tx ring can still use RS bit and writebacks */
 | |
| 	if (vsi->type != I40E_VSI_FDIR)
 | |
| 		tx_ctx.head_wb_ena = 1;
 | |
| 	tx_ctx.head_wb_addr = ring->dma +
 | |
| 			      (ring->count * sizeof(struct i40e_tx_desc));
 | |
| 
 | |
| 	/* As part of VSI creation/update, FW allocates certain
 | |
| 	 * Tx arbitration queue sets for each TC enabled for
 | |
| 	 * the VSI. The FW returns the handles to these queue
 | |
| 	 * sets as part of the response buffer to Add VSI,
 | |
| 	 * Update VSI, etc. AQ commands. It is expected that
 | |
| 	 * these queue set handles be associated with the Tx
 | |
| 	 * queues by the driver as part of the TX queue context
 | |
| 	 * initialization. This has to be done regardless of
 | |
| 	 * DCB as by default everything is mapped to TC0.
 | |
| 	 */
 | |
| 	tx_ctx.rdylist = le16_to_cpu(vsi->info.qs_handle[ring->dcb_tc]);
 | |
| 	tx_ctx.rdylist_act = 0;
 | |
| 
 | |
| 	/* clear the context in the HMC */
 | |
| 	err = i40e_clear_lan_tx_queue_context(hw, pf_q);
 | |
| 	if (err) {
 | |
| 		dev_info(&vsi->back->pdev->dev,
 | |
| 			 "Failed to clear LAN Tx queue context on Tx ring %d (pf_q %d), error: %d\n",
 | |
| 			 ring->queue_index, pf_q, err);
 | |
| 		return -ENOMEM;
 | |
| 	}
 | |
| 
 | |
| 	/* set the context in the HMC */
 | |
| 	err = i40e_set_lan_tx_queue_context(hw, pf_q, &tx_ctx);
 | |
| 	if (err) {
 | |
| 		dev_info(&vsi->back->pdev->dev,
 | |
| 			 "Failed to set LAN Tx queue context on Tx ring %d (pf_q %d, error: %d\n",
 | |
| 			 ring->queue_index, pf_q, err);
 | |
| 		return -ENOMEM;
 | |
| 	}
 | |
| 
 | |
| 	/* Now associate this queue with this PCI function */
 | |
| 	if (vsi->type == I40E_VSI_VMDQ2)
 | |
| 		qtx_ctl = I40E_QTX_CTL_VM_QUEUE;
 | |
| 	else
 | |
| 		qtx_ctl = I40E_QTX_CTL_PF_QUEUE;
 | |
| 	qtx_ctl |= ((hw->pf_id << I40E_QTX_CTL_PF_INDX_SHIFT) &
 | |
| 		    I40E_QTX_CTL_PF_INDX_MASK);
 | |
| 	wr32(hw, I40E_QTX_CTL(pf_q), qtx_ctl);
 | |
| 	i40e_flush(hw);
 | |
| 
 | |
| 	clear_bit(__I40E_HANG_CHECK_ARMED, &ring->state);
 | |
| 
 | |
| 	/* cache tail off for easier writes later */
 | |
| 	ring->tail = hw->hw_addr + I40E_QTX_TAIL(pf_q);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_configure_rx_ring - Configure a receive ring context
 | |
|  * @ring: The Rx ring to configure
 | |
|  *
 | |
|  * Configure the Rx descriptor ring in the HMC context.
 | |
|  **/
 | |
| static int i40e_configure_rx_ring(struct i40e_ring *ring)
 | |
| {
 | |
| 	struct i40e_vsi *vsi = ring->vsi;
 | |
| 	u32 chain_len = vsi->back->hw.func_caps.rx_buf_chain_len;
 | |
| 	u16 pf_q = vsi->base_queue + ring->queue_index;
 | |
| 	struct i40e_hw *hw = &vsi->back->hw;
 | |
| 	struct i40e_hmc_obj_rxq rx_ctx;
 | |
| 	i40e_status err = 0;
 | |
| 
 | |
| 	ring->state = 0;
 | |
| 
 | |
| 	/* clear the context structure first */
 | |
| 	memset(&rx_ctx, 0, sizeof(rx_ctx));
 | |
| 
 | |
| 	ring->rx_buf_len = vsi->rx_buf_len;
 | |
| 	ring->rx_hdr_len = vsi->rx_hdr_len;
 | |
| 
 | |
| 	rx_ctx.dbuff = ring->rx_buf_len >> I40E_RXQ_CTX_DBUFF_SHIFT;
 | |
| 	rx_ctx.hbuff = ring->rx_hdr_len >> I40E_RXQ_CTX_HBUFF_SHIFT;
 | |
| 
 | |
| 	rx_ctx.base = (ring->dma / 128);
 | |
| 	rx_ctx.qlen = ring->count;
 | |
| 
 | |
| 	if (vsi->back->flags & I40E_FLAG_16BYTE_RX_DESC_ENABLED) {
 | |
| 		set_ring_16byte_desc_enabled(ring);
 | |
| 		rx_ctx.dsize = 0;
 | |
| 	} else {
 | |
| 		rx_ctx.dsize = 1;
 | |
| 	}
 | |
| 
 | |
| 	rx_ctx.dtype = vsi->dtype;
 | |
| 	if (vsi->dtype) {
 | |
| 		set_ring_ps_enabled(ring);
 | |
| 		rx_ctx.hsplit_0 = I40E_RX_SPLIT_L2      |
 | |
| 				  I40E_RX_SPLIT_IP      |
 | |
| 				  I40E_RX_SPLIT_TCP_UDP |
 | |
| 				  I40E_RX_SPLIT_SCTP;
 | |
| 	} else {
 | |
| 		rx_ctx.hsplit_0 = 0;
 | |
| 	}
 | |
| 
 | |
| 	rx_ctx.rxmax = min_t(u16, vsi->max_frame,
 | |
| 				  (chain_len * ring->rx_buf_len));
 | |
| 	if (hw->revision_id == 0)
 | |
| 		rx_ctx.lrxqthresh = 0;
 | |
| 	else
 | |
| 		rx_ctx.lrxqthresh = 2;
 | |
| 	rx_ctx.crcstrip = 1;
 | |
| 	rx_ctx.l2tsel = 1;
 | |
| 	rx_ctx.showiv = 1;
 | |
| #ifdef I40E_FCOE
 | |
| 	rx_ctx.fc_ena = (vsi->type == I40E_VSI_FCOE);
 | |
| #endif
 | |
| 	/* set the prefena field to 1 because the manual says to */
 | |
| 	rx_ctx.prefena = 1;
 | |
| 
 | |
| 	/* clear the context in the HMC */
 | |
| 	err = i40e_clear_lan_rx_queue_context(hw, pf_q);
 | |
| 	if (err) {
 | |
| 		dev_info(&vsi->back->pdev->dev,
 | |
| 			 "Failed to clear LAN Rx queue context on Rx ring %d (pf_q %d), error: %d\n",
 | |
| 			 ring->queue_index, pf_q, err);
 | |
| 		return -ENOMEM;
 | |
| 	}
 | |
| 
 | |
| 	/* set the context in the HMC */
 | |
| 	err = i40e_set_lan_rx_queue_context(hw, pf_q, &rx_ctx);
 | |
| 	if (err) {
 | |
| 		dev_info(&vsi->back->pdev->dev,
 | |
| 			 "Failed to set LAN Rx queue context on Rx ring %d (pf_q %d), error: %d\n",
 | |
| 			 ring->queue_index, pf_q, err);
 | |
| 		return -ENOMEM;
 | |
| 	}
 | |
| 
 | |
| 	/* cache tail for quicker writes, and clear the reg before use */
 | |
| 	ring->tail = hw->hw_addr + I40E_QRX_TAIL(pf_q);
 | |
| 	writel(0, ring->tail);
 | |
| 
 | |
| 	i40e_alloc_rx_buffers(ring, I40E_DESC_UNUSED(ring));
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_vsi_configure_tx - Configure the VSI for Tx
 | |
|  * @vsi: VSI structure describing this set of rings and resources
 | |
|  *
 | |
|  * Configure the Tx VSI for operation.
 | |
|  **/
 | |
| static int i40e_vsi_configure_tx(struct i40e_vsi *vsi)
 | |
| {
 | |
| 	int err = 0;
 | |
| 	u16 i;
 | |
| 
 | |
| 	for (i = 0; (i < vsi->num_queue_pairs) && !err; i++)
 | |
| 		err = i40e_configure_tx_ring(vsi->tx_rings[i]);
 | |
| 
 | |
| 	return err;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_vsi_configure_rx - Configure the VSI for Rx
 | |
|  * @vsi: the VSI being configured
 | |
|  *
 | |
|  * Configure the Rx VSI for operation.
 | |
|  **/
 | |
| static int i40e_vsi_configure_rx(struct i40e_vsi *vsi)
 | |
| {
 | |
| 	int err = 0;
 | |
| 	u16 i;
 | |
| 
 | |
| 	if (vsi->netdev && (vsi->netdev->mtu > ETH_DATA_LEN))
 | |
| 		vsi->max_frame = vsi->netdev->mtu + ETH_HLEN
 | |
| 			       + ETH_FCS_LEN + VLAN_HLEN;
 | |
| 	else
 | |
| 		vsi->max_frame = I40E_RXBUFFER_2048;
 | |
| 
 | |
| 	/* figure out correct receive buffer length */
 | |
| 	switch (vsi->back->flags & (I40E_FLAG_RX_1BUF_ENABLED |
 | |
| 				    I40E_FLAG_RX_PS_ENABLED)) {
 | |
| 	case I40E_FLAG_RX_1BUF_ENABLED:
 | |
| 		vsi->rx_hdr_len = 0;
 | |
| 		vsi->rx_buf_len = vsi->max_frame;
 | |
| 		vsi->dtype = I40E_RX_DTYPE_NO_SPLIT;
 | |
| 		break;
 | |
| 	case I40E_FLAG_RX_PS_ENABLED:
 | |
| 		vsi->rx_hdr_len = I40E_RX_HDR_SIZE;
 | |
| 		vsi->rx_buf_len = I40E_RXBUFFER_2048;
 | |
| 		vsi->dtype = I40E_RX_DTYPE_HEADER_SPLIT;
 | |
| 		break;
 | |
| 	default:
 | |
| 		vsi->rx_hdr_len = I40E_RX_HDR_SIZE;
 | |
| 		vsi->rx_buf_len = I40E_RXBUFFER_2048;
 | |
| 		vsi->dtype = I40E_RX_DTYPE_SPLIT_ALWAYS;
 | |
| 		break;
 | |
| 	}
 | |
| 
 | |
| #ifdef I40E_FCOE
 | |
| 	/* setup rx buffer for FCoE */
 | |
| 	if ((vsi->type == I40E_VSI_FCOE) &&
 | |
| 	    (vsi->back->flags & I40E_FLAG_FCOE_ENABLED)) {
 | |
| 		vsi->rx_hdr_len = 0;
 | |
| 		vsi->rx_buf_len = I40E_RXBUFFER_3072;
 | |
| 		vsi->max_frame = I40E_RXBUFFER_3072;
 | |
| 		vsi->dtype = I40E_RX_DTYPE_NO_SPLIT;
 | |
| 	}
 | |
| 
 | |
| #endif /* I40E_FCOE */
 | |
| 	/* round up for the chip's needs */
 | |
| 	vsi->rx_hdr_len = ALIGN(vsi->rx_hdr_len,
 | |
| 				(1 << I40E_RXQ_CTX_HBUFF_SHIFT));
 | |
| 	vsi->rx_buf_len = ALIGN(vsi->rx_buf_len,
 | |
| 				(1 << I40E_RXQ_CTX_DBUFF_SHIFT));
 | |
| 
 | |
| 	/* set up individual rings */
 | |
| 	for (i = 0; i < vsi->num_queue_pairs && !err; i++)
 | |
| 		err = i40e_configure_rx_ring(vsi->rx_rings[i]);
 | |
| 
 | |
| 	return err;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_vsi_config_dcb_rings - Update rings to reflect DCB TC
 | |
|  * @vsi: ptr to the VSI
 | |
|  **/
 | |
| static void i40e_vsi_config_dcb_rings(struct i40e_vsi *vsi)
 | |
| {
 | |
| 	struct i40e_ring *tx_ring, *rx_ring;
 | |
| 	u16 qoffset, qcount;
 | |
| 	int i, n;
 | |
| 
 | |
| 	if (!(vsi->back->flags & I40E_FLAG_DCB_ENABLED))
 | |
| 		return;
 | |
| 
 | |
| 	for (n = 0; n < I40E_MAX_TRAFFIC_CLASS; n++) {
 | |
| 		if (!(vsi->tc_config.enabled_tc & (1 << n)))
 | |
| 			continue;
 | |
| 
 | |
| 		qoffset = vsi->tc_config.tc_info[n].qoffset;
 | |
| 		qcount = vsi->tc_config.tc_info[n].qcount;
 | |
| 		for (i = qoffset; i < (qoffset + qcount); i++) {
 | |
| 			rx_ring = vsi->rx_rings[i];
 | |
| 			tx_ring = vsi->tx_rings[i];
 | |
| 			rx_ring->dcb_tc = n;
 | |
| 			tx_ring->dcb_tc = n;
 | |
| 		}
 | |
| 	}
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_set_vsi_rx_mode - Call set_rx_mode on a VSI
 | |
|  * @vsi: ptr to the VSI
 | |
|  **/
 | |
| static void i40e_set_vsi_rx_mode(struct i40e_vsi *vsi)
 | |
| {
 | |
| 	if (vsi->netdev)
 | |
| 		i40e_set_rx_mode(vsi->netdev);
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_fdir_filter_restore - Restore the Sideband Flow Director filters
 | |
|  * @vsi: Pointer to the targeted VSI
 | |
|  *
 | |
|  * This function replays the hlist on the hw where all the SB Flow Director
 | |
|  * filters were saved.
 | |
|  **/
 | |
| static void i40e_fdir_filter_restore(struct i40e_vsi *vsi)
 | |
| {
 | |
| 	struct i40e_fdir_filter *filter;
 | |
| 	struct i40e_pf *pf = vsi->back;
 | |
| 	struct hlist_node *node;
 | |
| 
 | |
| 	if (!(pf->flags & I40E_FLAG_FD_SB_ENABLED))
 | |
| 		return;
 | |
| 
 | |
| 	hlist_for_each_entry_safe(filter, node,
 | |
| 				  &pf->fdir_filter_list, fdir_node) {
 | |
| 		i40e_add_del_fdir(vsi, filter, true);
 | |
| 	}
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_vsi_configure - Set up the VSI for action
 | |
|  * @vsi: the VSI being configured
 | |
|  **/
 | |
| static int i40e_vsi_configure(struct i40e_vsi *vsi)
 | |
| {
 | |
| 	int err;
 | |
| 
 | |
| 	i40e_set_vsi_rx_mode(vsi);
 | |
| 	i40e_restore_vlan(vsi);
 | |
| 	i40e_vsi_config_dcb_rings(vsi);
 | |
| 	err = i40e_vsi_configure_tx(vsi);
 | |
| 	if (!err)
 | |
| 		err = i40e_vsi_configure_rx(vsi);
 | |
| 
 | |
| 	return err;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_vsi_configure_msix - MSIX mode Interrupt Config in the HW
 | |
|  * @vsi: the VSI being configured
 | |
|  **/
 | |
| static void i40e_vsi_configure_msix(struct i40e_vsi *vsi)
 | |
| {
 | |
| 	struct i40e_pf *pf = vsi->back;
 | |
| 	struct i40e_q_vector *q_vector;
 | |
| 	struct i40e_hw *hw = &pf->hw;
 | |
| 	u16 vector;
 | |
| 	int i, q;
 | |
| 	u32 val;
 | |
| 	u32 qp;
 | |
| 
 | |
| 	/* The interrupt indexing is offset by 1 in the PFINT_ITRn
 | |
| 	 * and PFINT_LNKLSTn registers, e.g.:
 | |
| 	 *   PFINT_ITRn[0..n-1] gets msix-1..msix-n  (qpair interrupts)
 | |
| 	 */
 | |
| 	qp = vsi->base_queue;
 | |
| 	vector = vsi->base_vector;
 | |
| 	for (i = 0; i < vsi->num_q_vectors; i++, vector++) {
 | |
| 		q_vector = vsi->q_vectors[i];
 | |
| 		q_vector->rx.itr = ITR_TO_REG(vsi->rx_itr_setting);
 | |
| 		q_vector->rx.latency_range = I40E_LOW_LATENCY;
 | |
| 		wr32(hw, I40E_PFINT_ITRN(I40E_RX_ITR, vector - 1),
 | |
| 		     q_vector->rx.itr);
 | |
| 		q_vector->tx.itr = ITR_TO_REG(vsi->tx_itr_setting);
 | |
| 		q_vector->tx.latency_range = I40E_LOW_LATENCY;
 | |
| 		wr32(hw, I40E_PFINT_ITRN(I40E_TX_ITR, vector - 1),
 | |
| 		     q_vector->tx.itr);
 | |
| 
 | |
| 		/* Linked list for the queuepairs assigned to this vector */
 | |
| 		wr32(hw, I40E_PFINT_LNKLSTN(vector - 1), qp);
 | |
| 		for (q = 0; q < q_vector->num_ringpairs; q++) {
 | |
| 			val = I40E_QINT_RQCTL_CAUSE_ENA_MASK |
 | |
| 			      (I40E_RX_ITR << I40E_QINT_RQCTL_ITR_INDX_SHIFT)  |
 | |
| 			      (vector      << I40E_QINT_RQCTL_MSIX_INDX_SHIFT) |
 | |
| 			      (qp          << I40E_QINT_RQCTL_NEXTQ_INDX_SHIFT)|
 | |
| 			      (I40E_QUEUE_TYPE_TX
 | |
| 				      << I40E_QINT_RQCTL_NEXTQ_TYPE_SHIFT);
 | |
| 
 | |
| 			wr32(hw, I40E_QINT_RQCTL(qp), val);
 | |
| 
 | |
| 			val = I40E_QINT_TQCTL_CAUSE_ENA_MASK |
 | |
| 			      (I40E_TX_ITR << I40E_QINT_TQCTL_ITR_INDX_SHIFT)  |
 | |
| 			      (vector      << I40E_QINT_TQCTL_MSIX_INDX_SHIFT) |
 | |
| 			      ((qp+1)      << I40E_QINT_TQCTL_NEXTQ_INDX_SHIFT)|
 | |
| 			      (I40E_QUEUE_TYPE_RX
 | |
| 				      << I40E_QINT_TQCTL_NEXTQ_TYPE_SHIFT);
 | |
| 
 | |
| 			/* Terminate the linked list */
 | |
| 			if (q == (q_vector->num_ringpairs - 1))
 | |
| 				val |= (I40E_QUEUE_END_OF_LIST
 | |
| 					   << I40E_QINT_TQCTL_NEXTQ_INDX_SHIFT);
 | |
| 
 | |
| 			wr32(hw, I40E_QINT_TQCTL(qp), val);
 | |
| 			qp++;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	i40e_flush(hw);
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_enable_misc_int_causes - enable the non-queue interrupts
 | |
|  * @hw: ptr to the hardware info
 | |
|  **/
 | |
| static void i40e_enable_misc_int_causes(struct i40e_hw *hw)
 | |
| {
 | |
| 	u32 val;
 | |
| 
 | |
| 	/* clear things first */
 | |
| 	wr32(hw, I40E_PFINT_ICR0_ENA, 0);  /* disable all */
 | |
| 	rd32(hw, I40E_PFINT_ICR0);         /* read to clear */
 | |
| 
 | |
| 	val = I40E_PFINT_ICR0_ENA_ECC_ERR_MASK       |
 | |
| 	      I40E_PFINT_ICR0_ENA_MAL_DETECT_MASK    |
 | |
| 	      I40E_PFINT_ICR0_ENA_GRST_MASK          |
 | |
| 	      I40E_PFINT_ICR0_ENA_PCI_EXCEPTION_MASK |
 | |
| 	      I40E_PFINT_ICR0_ENA_GPIO_MASK          |
 | |
| 	      I40E_PFINT_ICR0_ENA_TIMESYNC_MASK      |
 | |
| 	      I40E_PFINT_ICR0_ENA_HMC_ERR_MASK       |
 | |
| 	      I40E_PFINT_ICR0_ENA_VFLR_MASK          |
 | |
| 	      I40E_PFINT_ICR0_ENA_ADMINQ_MASK;
 | |
| 
 | |
| 	wr32(hw, I40E_PFINT_ICR0_ENA, val);
 | |
| 
 | |
| 	/* SW_ITR_IDX = 0, but don't change INTENA */
 | |
| 	wr32(hw, I40E_PFINT_DYN_CTL0, I40E_PFINT_DYN_CTL0_SW_ITR_INDX_MASK |
 | |
| 					I40E_PFINT_DYN_CTL0_INTENA_MSK_MASK);
 | |
| 
 | |
| 	/* OTHER_ITR_IDX = 0 */
 | |
| 	wr32(hw, I40E_PFINT_STAT_CTL0, 0);
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_configure_msi_and_legacy - Legacy mode interrupt config in the HW
 | |
|  * @vsi: the VSI being configured
 | |
|  **/
 | |
| static void i40e_configure_msi_and_legacy(struct i40e_vsi *vsi)
 | |
| {
 | |
| 	struct i40e_q_vector *q_vector = vsi->q_vectors[0];
 | |
| 	struct i40e_pf *pf = vsi->back;
 | |
| 	struct i40e_hw *hw = &pf->hw;
 | |
| 	u32 val;
 | |
| 
 | |
| 	/* set the ITR configuration */
 | |
| 	q_vector->rx.itr = ITR_TO_REG(vsi->rx_itr_setting);
 | |
| 	q_vector->rx.latency_range = I40E_LOW_LATENCY;
 | |
| 	wr32(hw, I40E_PFINT_ITR0(I40E_RX_ITR), q_vector->rx.itr);
 | |
| 	q_vector->tx.itr = ITR_TO_REG(vsi->tx_itr_setting);
 | |
| 	q_vector->tx.latency_range = I40E_LOW_LATENCY;
 | |
| 	wr32(hw, I40E_PFINT_ITR0(I40E_TX_ITR), q_vector->tx.itr);
 | |
| 
 | |
| 	i40e_enable_misc_int_causes(hw);
 | |
| 
 | |
| 	/* FIRSTQ_INDX = 0, FIRSTQ_TYPE = 0 (rx) */
 | |
| 	wr32(hw, I40E_PFINT_LNKLST0, 0);
 | |
| 
 | |
| 	/* Associate the queue pair to the vector and enable the queue int */
 | |
| 	val = I40E_QINT_RQCTL_CAUSE_ENA_MASK		      |
 | |
| 	      (I40E_RX_ITR << I40E_QINT_RQCTL_ITR_INDX_SHIFT) |
 | |
| 	      (I40E_QUEUE_TYPE_TX << I40E_QINT_TQCTL_NEXTQ_TYPE_SHIFT);
 | |
| 
 | |
| 	wr32(hw, I40E_QINT_RQCTL(0), val);
 | |
| 
 | |
| 	val = I40E_QINT_TQCTL_CAUSE_ENA_MASK		      |
 | |
| 	      (I40E_TX_ITR << I40E_QINT_TQCTL_ITR_INDX_SHIFT) |
 | |
| 	      (I40E_QUEUE_END_OF_LIST << I40E_QINT_TQCTL_NEXTQ_INDX_SHIFT);
 | |
| 
 | |
| 	wr32(hw, I40E_QINT_TQCTL(0), val);
 | |
| 	i40e_flush(hw);
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_irq_dynamic_disable_icr0 - Disable default interrupt generation for icr0
 | |
|  * @pf: board private structure
 | |
|  **/
 | |
| void i40e_irq_dynamic_disable_icr0(struct i40e_pf *pf)
 | |
| {
 | |
| 	struct i40e_hw *hw = &pf->hw;
 | |
| 
 | |
| 	wr32(hw, I40E_PFINT_DYN_CTL0,
 | |
| 	     I40E_ITR_NONE << I40E_PFINT_DYN_CTLN_ITR_INDX_SHIFT);
 | |
| 	i40e_flush(hw);
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_irq_dynamic_enable_icr0 - Enable default interrupt generation for icr0
 | |
|  * @pf: board private structure
 | |
|  **/
 | |
| void i40e_irq_dynamic_enable_icr0(struct i40e_pf *pf)
 | |
| {
 | |
| 	struct i40e_hw *hw = &pf->hw;
 | |
| 	u32 val;
 | |
| 
 | |
| 	val = I40E_PFINT_DYN_CTL0_INTENA_MASK   |
 | |
| 	      I40E_PFINT_DYN_CTL0_CLEARPBA_MASK |
 | |
| 	      (I40E_ITR_NONE << I40E_PFINT_DYN_CTL0_ITR_INDX_SHIFT);
 | |
| 
 | |
| 	wr32(hw, I40E_PFINT_DYN_CTL0, val);
 | |
| 	i40e_flush(hw);
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_irq_dynamic_enable - Enable default interrupt generation settings
 | |
|  * @vsi: pointer to a vsi
 | |
|  * @vector: enable a particular Hw Interrupt vector
 | |
|  **/
 | |
| void i40e_irq_dynamic_enable(struct i40e_vsi *vsi, int vector)
 | |
| {
 | |
| 	struct i40e_pf *pf = vsi->back;
 | |
| 	struct i40e_hw *hw = &pf->hw;
 | |
| 	u32 val;
 | |
| 
 | |
| 	val = I40E_PFINT_DYN_CTLN_INTENA_MASK |
 | |
| 	      I40E_PFINT_DYN_CTLN_CLEARPBA_MASK |
 | |
| 	      (I40E_ITR_NONE << I40E_PFINT_DYN_CTLN_ITR_INDX_SHIFT);
 | |
| 	wr32(hw, I40E_PFINT_DYN_CTLN(vector - 1), val);
 | |
| 	/* skip the flush */
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_irq_dynamic_disable - Disable default interrupt generation settings
 | |
|  * @vsi: pointer to a vsi
 | |
|  * @vector: enable a particular Hw Interrupt vector
 | |
|  **/
 | |
| void i40e_irq_dynamic_disable(struct i40e_vsi *vsi, int vector)
 | |
| {
 | |
| 	struct i40e_pf *pf = vsi->back;
 | |
| 	struct i40e_hw *hw = &pf->hw;
 | |
| 	u32 val;
 | |
| 
 | |
| 	val = I40E_ITR_NONE << I40E_PFINT_DYN_CTLN_ITR_INDX_SHIFT;
 | |
| 	wr32(hw, I40E_PFINT_DYN_CTLN(vector - 1), val);
 | |
| 	i40e_flush(hw);
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_msix_clean_rings - MSIX mode Interrupt Handler
 | |
|  * @irq: interrupt number
 | |
|  * @data: pointer to a q_vector
 | |
|  **/
 | |
| static irqreturn_t i40e_msix_clean_rings(int irq, void *data)
 | |
| {
 | |
| 	struct i40e_q_vector *q_vector = data;
 | |
| 
 | |
| 	if (!q_vector->tx.ring && !q_vector->rx.ring)
 | |
| 		return IRQ_HANDLED;
 | |
| 
 | |
| 	napi_schedule(&q_vector->napi);
 | |
| 
 | |
| 	return IRQ_HANDLED;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_vsi_request_irq_msix - Initialize MSI-X interrupts
 | |
|  * @vsi: the VSI being configured
 | |
|  * @basename: name for the vector
 | |
|  *
 | |
|  * Allocates MSI-X vectors and requests interrupts from the kernel.
 | |
|  **/
 | |
| static int i40e_vsi_request_irq_msix(struct i40e_vsi *vsi, char *basename)
 | |
| {
 | |
| 	int q_vectors = vsi->num_q_vectors;
 | |
| 	struct i40e_pf *pf = vsi->back;
 | |
| 	int base = vsi->base_vector;
 | |
| 	int rx_int_idx = 0;
 | |
| 	int tx_int_idx = 0;
 | |
| 	int vector, err;
 | |
| 
 | |
| 	for (vector = 0; vector < q_vectors; vector++) {
 | |
| 		struct i40e_q_vector *q_vector = vsi->q_vectors[vector];
 | |
| 
 | |
| 		if (q_vector->tx.ring && q_vector->rx.ring) {
 | |
| 			snprintf(q_vector->name, sizeof(q_vector->name) - 1,
 | |
| 				 "%s-%s-%d", basename, "TxRx", rx_int_idx++);
 | |
| 			tx_int_idx++;
 | |
| 		} else if (q_vector->rx.ring) {
 | |
| 			snprintf(q_vector->name, sizeof(q_vector->name) - 1,
 | |
| 				 "%s-%s-%d", basename, "rx", rx_int_idx++);
 | |
| 		} else if (q_vector->tx.ring) {
 | |
| 			snprintf(q_vector->name, sizeof(q_vector->name) - 1,
 | |
| 				 "%s-%s-%d", basename, "tx", tx_int_idx++);
 | |
| 		} else {
 | |
| 			/* skip this unused q_vector */
 | |
| 			continue;
 | |
| 		}
 | |
| 		err = request_irq(pf->msix_entries[base + vector].vector,
 | |
| 				  vsi->irq_handler,
 | |
| 				  0,
 | |
| 				  q_vector->name,
 | |
| 				  q_vector);
 | |
| 		if (err) {
 | |
| 			dev_info(&pf->pdev->dev,
 | |
| 				 "%s: request_irq failed, error: %d\n",
 | |
| 				 __func__, err);
 | |
| 			goto free_queue_irqs;
 | |
| 		}
 | |
| 		/* assign the mask for this irq */
 | |
| 		irq_set_affinity_hint(pf->msix_entries[base + vector].vector,
 | |
| 				      &q_vector->affinity_mask);
 | |
| 	}
 | |
| 
 | |
| 	vsi->irqs_ready = true;
 | |
| 	return 0;
 | |
| 
 | |
| free_queue_irqs:
 | |
| 	while (vector) {
 | |
| 		vector--;
 | |
| 		irq_set_affinity_hint(pf->msix_entries[base + vector].vector,
 | |
| 				      NULL);
 | |
| 		free_irq(pf->msix_entries[base + vector].vector,
 | |
| 			 &(vsi->q_vectors[vector]));
 | |
| 	}
 | |
| 	return err;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_vsi_disable_irq - Mask off queue interrupt generation on the VSI
 | |
|  * @vsi: the VSI being un-configured
 | |
|  **/
 | |
| static void i40e_vsi_disable_irq(struct i40e_vsi *vsi)
 | |
| {
 | |
| 	struct i40e_pf *pf = vsi->back;
 | |
| 	struct i40e_hw *hw = &pf->hw;
 | |
| 	int base = vsi->base_vector;
 | |
| 	int i;
 | |
| 
 | |
| 	for (i = 0; i < vsi->num_queue_pairs; i++) {
 | |
| 		wr32(hw, I40E_QINT_TQCTL(vsi->tx_rings[i]->reg_idx), 0);
 | |
| 		wr32(hw, I40E_QINT_RQCTL(vsi->rx_rings[i]->reg_idx), 0);
 | |
| 	}
 | |
| 
 | |
| 	if (pf->flags & I40E_FLAG_MSIX_ENABLED) {
 | |
| 		for (i = vsi->base_vector;
 | |
| 		     i < (vsi->num_q_vectors + vsi->base_vector); i++)
 | |
| 			wr32(hw, I40E_PFINT_DYN_CTLN(i - 1), 0);
 | |
| 
 | |
| 		i40e_flush(hw);
 | |
| 		for (i = 0; i < vsi->num_q_vectors; i++)
 | |
| 			synchronize_irq(pf->msix_entries[i + base].vector);
 | |
| 	} else {
 | |
| 		/* Legacy and MSI mode - this stops all interrupt handling */
 | |
| 		wr32(hw, I40E_PFINT_ICR0_ENA, 0);
 | |
| 		wr32(hw, I40E_PFINT_DYN_CTL0, 0);
 | |
| 		i40e_flush(hw);
 | |
| 		synchronize_irq(pf->pdev->irq);
 | |
| 	}
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_vsi_enable_irq - Enable IRQ for the given VSI
 | |
|  * @vsi: the VSI being configured
 | |
|  **/
 | |
| static int i40e_vsi_enable_irq(struct i40e_vsi *vsi)
 | |
| {
 | |
| 	struct i40e_pf *pf = vsi->back;
 | |
| 	int i;
 | |
| 
 | |
| 	if (pf->flags & I40E_FLAG_MSIX_ENABLED) {
 | |
| 		for (i = vsi->base_vector;
 | |
| 		     i < (vsi->num_q_vectors + vsi->base_vector); i++)
 | |
| 			i40e_irq_dynamic_enable(vsi, i);
 | |
| 	} else {
 | |
| 		i40e_irq_dynamic_enable_icr0(pf);
 | |
| 	}
 | |
| 
 | |
| 	i40e_flush(&pf->hw);
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_stop_misc_vector - Stop the vector that handles non-queue events
 | |
|  * @pf: board private structure
 | |
|  **/
 | |
| static void i40e_stop_misc_vector(struct i40e_pf *pf)
 | |
| {
 | |
| 	/* Disable ICR 0 */
 | |
| 	wr32(&pf->hw, I40E_PFINT_ICR0_ENA, 0);
 | |
| 	i40e_flush(&pf->hw);
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_intr - MSI/Legacy and non-queue interrupt handler
 | |
|  * @irq: interrupt number
 | |
|  * @data: pointer to a q_vector
 | |
|  *
 | |
|  * This is the handler used for all MSI/Legacy interrupts, and deals
 | |
|  * with both queue and non-queue interrupts.  This is also used in
 | |
|  * MSIX mode to handle the non-queue interrupts.
 | |
|  **/
 | |
| static irqreturn_t i40e_intr(int irq, void *data)
 | |
| {
 | |
| 	struct i40e_pf *pf = (struct i40e_pf *)data;
 | |
| 	struct i40e_hw *hw = &pf->hw;
 | |
| 	irqreturn_t ret = IRQ_NONE;
 | |
| 	u32 icr0, icr0_remaining;
 | |
| 	u32 val, ena_mask;
 | |
| 
 | |
| 	icr0 = rd32(hw, I40E_PFINT_ICR0);
 | |
| 	ena_mask = rd32(hw, I40E_PFINT_ICR0_ENA);
 | |
| 
 | |
| 	/* if sharing a legacy IRQ, we might get called w/o an intr pending */
 | |
| 	if ((icr0 & I40E_PFINT_ICR0_INTEVENT_MASK) == 0)
 | |
| 		goto enable_intr;
 | |
| 
 | |
| 	/* if interrupt but no bits showing, must be SWINT */
 | |
| 	if (((icr0 & ~I40E_PFINT_ICR0_INTEVENT_MASK) == 0) ||
 | |
| 	    (icr0 & I40E_PFINT_ICR0_SWINT_MASK))
 | |
| 		pf->sw_int_count++;
 | |
| 
 | |
| 	/* only q0 is used in MSI/Legacy mode, and none are used in MSIX */
 | |
| 	if (icr0 & I40E_PFINT_ICR0_QUEUE_0_MASK) {
 | |
| 
 | |
| 		/* temporarily disable queue cause for NAPI processing */
 | |
| 		u32 qval = rd32(hw, I40E_QINT_RQCTL(0));
 | |
| 		qval &= ~I40E_QINT_RQCTL_CAUSE_ENA_MASK;
 | |
| 		wr32(hw, I40E_QINT_RQCTL(0), qval);
 | |
| 
 | |
| 		qval = rd32(hw, I40E_QINT_TQCTL(0));
 | |
| 		qval &= ~I40E_QINT_TQCTL_CAUSE_ENA_MASK;
 | |
| 		wr32(hw, I40E_QINT_TQCTL(0), qval);
 | |
| 
 | |
| 		if (!test_bit(__I40E_DOWN, &pf->state))
 | |
| 			napi_schedule(&pf->vsi[pf->lan_vsi]->q_vectors[0]->napi);
 | |
| 	}
 | |
| 
 | |
| 	if (icr0 & I40E_PFINT_ICR0_ADMINQ_MASK) {
 | |
| 		ena_mask &= ~I40E_PFINT_ICR0_ENA_ADMINQ_MASK;
 | |
| 		set_bit(__I40E_ADMINQ_EVENT_PENDING, &pf->state);
 | |
| 	}
 | |
| 
 | |
| 	if (icr0 & I40E_PFINT_ICR0_MAL_DETECT_MASK) {
 | |
| 		ena_mask &= ~I40E_PFINT_ICR0_ENA_MAL_DETECT_MASK;
 | |
| 		set_bit(__I40E_MDD_EVENT_PENDING, &pf->state);
 | |
| 	}
 | |
| 
 | |
| 	if (icr0 & I40E_PFINT_ICR0_VFLR_MASK) {
 | |
| 		ena_mask &= ~I40E_PFINT_ICR0_ENA_VFLR_MASK;
 | |
| 		set_bit(__I40E_VFLR_EVENT_PENDING, &pf->state);
 | |
| 	}
 | |
| 
 | |
| 	if (icr0 & I40E_PFINT_ICR0_GRST_MASK) {
 | |
| 		if (!test_bit(__I40E_RESET_RECOVERY_PENDING, &pf->state))
 | |
| 			set_bit(__I40E_RESET_INTR_RECEIVED, &pf->state);
 | |
| 		ena_mask &= ~I40E_PFINT_ICR0_ENA_GRST_MASK;
 | |
| 		val = rd32(hw, I40E_GLGEN_RSTAT);
 | |
| 		val = (val & I40E_GLGEN_RSTAT_RESET_TYPE_MASK)
 | |
| 		       >> I40E_GLGEN_RSTAT_RESET_TYPE_SHIFT;
 | |
| 		if (val == I40E_RESET_CORER) {
 | |
| 			pf->corer_count++;
 | |
| 		} else if (val == I40E_RESET_GLOBR) {
 | |
| 			pf->globr_count++;
 | |
| 		} else if (val == I40E_RESET_EMPR) {
 | |
| 			pf->empr_count++;
 | |
| 			set_bit(__I40E_EMP_RESET_REQUESTED, &pf->state);
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	if (icr0 & I40E_PFINT_ICR0_HMC_ERR_MASK) {
 | |
| 		icr0 &= ~I40E_PFINT_ICR0_HMC_ERR_MASK;
 | |
| 		dev_info(&pf->pdev->dev, "HMC error interrupt\n");
 | |
| 	}
 | |
| 
 | |
| 	if (icr0 & I40E_PFINT_ICR0_TIMESYNC_MASK) {
 | |
| 		u32 prttsyn_stat = rd32(hw, I40E_PRTTSYN_STAT_0);
 | |
| 
 | |
| 		if (prttsyn_stat & I40E_PRTTSYN_STAT_0_TXTIME_MASK) {
 | |
| 			icr0 &= ~I40E_PFINT_ICR0_ENA_TIMESYNC_MASK;
 | |
| 			i40e_ptp_tx_hwtstamp(pf);
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	/* If a critical error is pending we have no choice but to reset the
 | |
| 	 * device.
 | |
| 	 * Report and mask out any remaining unexpected interrupts.
 | |
| 	 */
 | |
| 	icr0_remaining = icr0 & ena_mask;
 | |
| 	if (icr0_remaining) {
 | |
| 		dev_info(&pf->pdev->dev, "unhandled interrupt icr0=0x%08x\n",
 | |
| 			 icr0_remaining);
 | |
| 		if ((icr0_remaining & I40E_PFINT_ICR0_PE_CRITERR_MASK) ||
 | |
| 		    (icr0_remaining & I40E_PFINT_ICR0_PCI_EXCEPTION_MASK) ||
 | |
| 		    (icr0_remaining & I40E_PFINT_ICR0_ECC_ERR_MASK)) {
 | |
| 			dev_info(&pf->pdev->dev, "device will be reset\n");
 | |
| 			set_bit(__I40E_PF_RESET_REQUESTED, &pf->state);
 | |
| 			i40e_service_event_schedule(pf);
 | |
| 		}
 | |
| 		ena_mask &= ~icr0_remaining;
 | |
| 	}
 | |
| 	ret = IRQ_HANDLED;
 | |
| 
 | |
| enable_intr:
 | |
| 	/* re-enable interrupt causes */
 | |
| 	wr32(hw, I40E_PFINT_ICR0_ENA, ena_mask);
 | |
| 	if (!test_bit(__I40E_DOWN, &pf->state)) {
 | |
| 		i40e_service_event_schedule(pf);
 | |
| 		i40e_irq_dynamic_enable_icr0(pf);
 | |
| 	}
 | |
| 
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_clean_fdir_tx_irq - Reclaim resources after transmit completes
 | |
|  * @tx_ring:  tx ring to clean
 | |
|  * @budget:   how many cleans we're allowed
 | |
|  *
 | |
|  * Returns true if there's any budget left (e.g. the clean is finished)
 | |
|  **/
 | |
| static bool i40e_clean_fdir_tx_irq(struct i40e_ring *tx_ring, int budget)
 | |
| {
 | |
| 	struct i40e_vsi *vsi = tx_ring->vsi;
 | |
| 	u16 i = tx_ring->next_to_clean;
 | |
| 	struct i40e_tx_buffer *tx_buf;
 | |
| 	struct i40e_tx_desc *tx_desc;
 | |
| 
 | |
| 	tx_buf = &tx_ring->tx_bi[i];
 | |
| 	tx_desc = I40E_TX_DESC(tx_ring, i);
 | |
| 	i -= tx_ring->count;
 | |
| 
 | |
| 	do {
 | |
| 		struct i40e_tx_desc *eop_desc = tx_buf->next_to_watch;
 | |
| 
 | |
| 		/* if next_to_watch is not set then there is no work pending */
 | |
| 		if (!eop_desc)
 | |
| 			break;
 | |
| 
 | |
| 		/* prevent any other reads prior to eop_desc */
 | |
| 		read_barrier_depends();
 | |
| 
 | |
| 		/* if the descriptor isn't done, no work yet to do */
 | |
| 		if (!(eop_desc->cmd_type_offset_bsz &
 | |
| 		      cpu_to_le64(I40E_TX_DESC_DTYPE_DESC_DONE)))
 | |
| 			break;
 | |
| 
 | |
| 		/* clear next_to_watch to prevent false hangs */
 | |
| 		tx_buf->next_to_watch = NULL;
 | |
| 
 | |
| 		tx_desc->buffer_addr = 0;
 | |
| 		tx_desc->cmd_type_offset_bsz = 0;
 | |
| 		/* move past filter desc */
 | |
| 		tx_buf++;
 | |
| 		tx_desc++;
 | |
| 		i++;
 | |
| 		if (unlikely(!i)) {
 | |
| 			i -= tx_ring->count;
 | |
| 			tx_buf = tx_ring->tx_bi;
 | |
| 			tx_desc = I40E_TX_DESC(tx_ring, 0);
 | |
| 		}
 | |
| 		/* unmap skb header data */
 | |
| 		dma_unmap_single(tx_ring->dev,
 | |
| 				 dma_unmap_addr(tx_buf, dma),
 | |
| 				 dma_unmap_len(tx_buf, len),
 | |
| 				 DMA_TO_DEVICE);
 | |
| 		if (tx_buf->tx_flags & I40E_TX_FLAGS_FD_SB)
 | |
| 			kfree(tx_buf->raw_buf);
 | |
| 
 | |
| 		tx_buf->raw_buf = NULL;
 | |
| 		tx_buf->tx_flags = 0;
 | |
| 		tx_buf->next_to_watch = NULL;
 | |
| 		dma_unmap_len_set(tx_buf, len, 0);
 | |
| 		tx_desc->buffer_addr = 0;
 | |
| 		tx_desc->cmd_type_offset_bsz = 0;
 | |
| 
 | |
| 		/* move us past the eop_desc for start of next FD desc */
 | |
| 		tx_buf++;
 | |
| 		tx_desc++;
 | |
| 		i++;
 | |
| 		if (unlikely(!i)) {
 | |
| 			i -= tx_ring->count;
 | |
| 			tx_buf = tx_ring->tx_bi;
 | |
| 			tx_desc = I40E_TX_DESC(tx_ring, 0);
 | |
| 		}
 | |
| 
 | |
| 		/* update budget accounting */
 | |
| 		budget--;
 | |
| 	} while (likely(budget));
 | |
| 
 | |
| 	i += tx_ring->count;
 | |
| 	tx_ring->next_to_clean = i;
 | |
| 
 | |
| 	if (vsi->back->flags & I40E_FLAG_MSIX_ENABLED) {
 | |
| 		i40e_irq_dynamic_enable(vsi,
 | |
| 				tx_ring->q_vector->v_idx + vsi->base_vector);
 | |
| 	}
 | |
| 	return budget > 0;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_fdir_clean_ring - Interrupt Handler for FDIR SB ring
 | |
|  * @irq: interrupt number
 | |
|  * @data: pointer to a q_vector
 | |
|  **/
 | |
| static irqreturn_t i40e_fdir_clean_ring(int irq, void *data)
 | |
| {
 | |
| 	struct i40e_q_vector *q_vector = data;
 | |
| 	struct i40e_vsi *vsi;
 | |
| 
 | |
| 	if (!q_vector->tx.ring)
 | |
| 		return IRQ_HANDLED;
 | |
| 
 | |
| 	vsi = q_vector->tx.ring->vsi;
 | |
| 	i40e_clean_fdir_tx_irq(q_vector->tx.ring, vsi->work_limit);
 | |
| 
 | |
| 	return IRQ_HANDLED;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_map_vector_to_qp - Assigns the queue pair to the vector
 | |
|  * @vsi: the VSI being configured
 | |
|  * @v_idx: vector index
 | |
|  * @qp_idx: queue pair index
 | |
|  **/
 | |
| static void map_vector_to_qp(struct i40e_vsi *vsi, int v_idx, int qp_idx)
 | |
| {
 | |
| 	struct i40e_q_vector *q_vector = vsi->q_vectors[v_idx];
 | |
| 	struct i40e_ring *tx_ring = vsi->tx_rings[qp_idx];
 | |
| 	struct i40e_ring *rx_ring = vsi->rx_rings[qp_idx];
 | |
| 
 | |
| 	tx_ring->q_vector = q_vector;
 | |
| 	tx_ring->next = q_vector->tx.ring;
 | |
| 	q_vector->tx.ring = tx_ring;
 | |
| 	q_vector->tx.count++;
 | |
| 
 | |
| 	rx_ring->q_vector = q_vector;
 | |
| 	rx_ring->next = q_vector->rx.ring;
 | |
| 	q_vector->rx.ring = rx_ring;
 | |
| 	q_vector->rx.count++;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_vsi_map_rings_to_vectors - Maps descriptor rings to vectors
 | |
|  * @vsi: the VSI being configured
 | |
|  *
 | |
|  * This function maps descriptor rings to the queue-specific vectors
 | |
|  * we were allotted through the MSI-X enabling code.  Ideally, we'd have
 | |
|  * one vector per queue pair, but on a constrained vector budget, we
 | |
|  * group the queue pairs as "efficiently" as possible.
 | |
|  **/
 | |
| static void i40e_vsi_map_rings_to_vectors(struct i40e_vsi *vsi)
 | |
| {
 | |
| 	int qp_remaining = vsi->num_queue_pairs;
 | |
| 	int q_vectors = vsi->num_q_vectors;
 | |
| 	int num_ringpairs;
 | |
| 	int v_start = 0;
 | |
| 	int qp_idx = 0;
 | |
| 
 | |
| 	/* If we don't have enough vectors for a 1-to-1 mapping, we'll have to
 | |
| 	 * group them so there are multiple queues per vector.
 | |
| 	 * It is also important to go through all the vectors available to be
 | |
| 	 * sure that if we don't use all the vectors, that the remaining vectors
 | |
| 	 * are cleared. This is especially important when decreasing the
 | |
| 	 * number of queues in use.
 | |
| 	 */
 | |
| 	for (; v_start < q_vectors; v_start++) {
 | |
| 		struct i40e_q_vector *q_vector = vsi->q_vectors[v_start];
 | |
| 
 | |
| 		num_ringpairs = DIV_ROUND_UP(qp_remaining, q_vectors - v_start);
 | |
| 
 | |
| 		q_vector->num_ringpairs = num_ringpairs;
 | |
| 
 | |
| 		q_vector->rx.count = 0;
 | |
| 		q_vector->tx.count = 0;
 | |
| 		q_vector->rx.ring = NULL;
 | |
| 		q_vector->tx.ring = NULL;
 | |
| 
 | |
| 		while (num_ringpairs--) {
 | |
| 			map_vector_to_qp(vsi, v_start, qp_idx);
 | |
| 			qp_idx++;
 | |
| 			qp_remaining--;
 | |
| 		}
 | |
| 	}
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_vsi_request_irq - Request IRQ from the OS
 | |
|  * @vsi: the VSI being configured
 | |
|  * @basename: name for the vector
 | |
|  **/
 | |
| static int i40e_vsi_request_irq(struct i40e_vsi *vsi, char *basename)
 | |
| {
 | |
| 	struct i40e_pf *pf = vsi->back;
 | |
| 	int err;
 | |
| 
 | |
| 	if (pf->flags & I40E_FLAG_MSIX_ENABLED)
 | |
| 		err = i40e_vsi_request_irq_msix(vsi, basename);
 | |
| 	else if (pf->flags & I40E_FLAG_MSI_ENABLED)
 | |
| 		err = request_irq(pf->pdev->irq, i40e_intr, 0,
 | |
| 				  pf->misc_int_name, pf);
 | |
| 	else
 | |
| 		err = request_irq(pf->pdev->irq, i40e_intr, IRQF_SHARED,
 | |
| 				  pf->misc_int_name, pf);
 | |
| 
 | |
| 	if (err)
 | |
| 		dev_info(&pf->pdev->dev, "request_irq failed, Error %d\n", err);
 | |
| 
 | |
| 	return err;
 | |
| }
 | |
| 
 | |
| #ifdef CONFIG_NET_POLL_CONTROLLER
 | |
| /**
 | |
|  * i40e_netpoll - A Polling 'interrupt'handler
 | |
|  * @netdev: network interface device structure
 | |
|  *
 | |
|  * This is used by netconsole to send skbs without having to re-enable
 | |
|  * interrupts.  It's not called while the normal interrupt routine is executing.
 | |
|  **/
 | |
| #ifdef I40E_FCOE
 | |
| void i40e_netpoll(struct net_device *netdev)
 | |
| #else
 | |
| static void i40e_netpoll(struct net_device *netdev)
 | |
| #endif
 | |
| {
 | |
| 	struct i40e_netdev_priv *np = netdev_priv(netdev);
 | |
| 	struct i40e_vsi *vsi = np->vsi;
 | |
| 	struct i40e_pf *pf = vsi->back;
 | |
| 	int i;
 | |
| 
 | |
| 	/* if interface is down do nothing */
 | |
| 	if (test_bit(__I40E_DOWN, &vsi->state))
 | |
| 		return;
 | |
| 
 | |
| 	pf->flags |= I40E_FLAG_IN_NETPOLL;
 | |
| 	if (pf->flags & I40E_FLAG_MSIX_ENABLED) {
 | |
| 		for (i = 0; i < vsi->num_q_vectors; i++)
 | |
| 			i40e_msix_clean_rings(0, vsi->q_vectors[i]);
 | |
| 	} else {
 | |
| 		i40e_intr(pf->pdev->irq, netdev);
 | |
| 	}
 | |
| 	pf->flags &= ~I40E_FLAG_IN_NETPOLL;
 | |
| }
 | |
| #endif
 | |
| 
 | |
| /**
 | |
|  * i40e_pf_txq_wait - Wait for a PF's Tx queue to be enabled or disabled
 | |
|  * @pf: the PF being configured
 | |
|  * @pf_q: the PF queue
 | |
|  * @enable: enable or disable state of the queue
 | |
|  *
 | |
|  * This routine will wait for the given Tx queue of the PF to reach the
 | |
|  * enabled or disabled state.
 | |
|  * Returns -ETIMEDOUT in case of failing to reach the requested state after
 | |
|  * multiple retries; else will return 0 in case of success.
 | |
|  **/
 | |
| static int i40e_pf_txq_wait(struct i40e_pf *pf, int pf_q, bool enable)
 | |
| {
 | |
| 	int i;
 | |
| 	u32 tx_reg;
 | |
| 
 | |
| 	for (i = 0; i < I40E_QUEUE_WAIT_RETRY_LIMIT; i++) {
 | |
| 		tx_reg = rd32(&pf->hw, I40E_QTX_ENA(pf_q));
 | |
| 		if (enable == !!(tx_reg & I40E_QTX_ENA_QENA_STAT_MASK))
 | |
| 			break;
 | |
| 
 | |
| 		udelay(10);
 | |
| 	}
 | |
| 	if (i >= I40E_QUEUE_WAIT_RETRY_LIMIT)
 | |
| 		return -ETIMEDOUT;
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_vsi_control_tx - Start or stop a VSI's rings
 | |
|  * @vsi: the VSI being configured
 | |
|  * @enable: start or stop the rings
 | |
|  **/
 | |
| static int i40e_vsi_control_tx(struct i40e_vsi *vsi, bool enable)
 | |
| {
 | |
| 	struct i40e_pf *pf = vsi->back;
 | |
| 	struct i40e_hw *hw = &pf->hw;
 | |
| 	int i, j, pf_q, ret = 0;
 | |
| 	u32 tx_reg;
 | |
| 
 | |
| 	pf_q = vsi->base_queue;
 | |
| 	for (i = 0; i < vsi->num_queue_pairs; i++, pf_q++) {
 | |
| 
 | |
| 		/* warn the TX unit of coming changes */
 | |
| 		i40e_pre_tx_queue_cfg(&pf->hw, pf_q, enable);
 | |
| 		if (!enable)
 | |
| 			udelay(10);
 | |
| 
 | |
| 		for (j = 0; j < 50; j++) {
 | |
| 			tx_reg = rd32(hw, I40E_QTX_ENA(pf_q));
 | |
| 			if (((tx_reg >> I40E_QTX_ENA_QENA_REQ_SHIFT) & 1) ==
 | |
| 			    ((tx_reg >> I40E_QTX_ENA_QENA_STAT_SHIFT) & 1))
 | |
| 				break;
 | |
| 			usleep_range(1000, 2000);
 | |
| 		}
 | |
| 		/* Skip if the queue is already in the requested state */
 | |
| 		if (enable == !!(tx_reg & I40E_QTX_ENA_QENA_STAT_MASK))
 | |
| 			continue;
 | |
| 
 | |
| 		/* turn on/off the queue */
 | |
| 		if (enable) {
 | |
| 			wr32(hw, I40E_QTX_HEAD(pf_q), 0);
 | |
| 			tx_reg |= I40E_QTX_ENA_QENA_REQ_MASK;
 | |
| 		} else {
 | |
| 			tx_reg &= ~I40E_QTX_ENA_QENA_REQ_MASK;
 | |
| 		}
 | |
| 
 | |
| 		wr32(hw, I40E_QTX_ENA(pf_q), tx_reg);
 | |
| 
 | |
| 		/* wait for the change to finish */
 | |
| 		ret = i40e_pf_txq_wait(pf, pf_q, enable);
 | |
| 		if (ret) {
 | |
| 			dev_info(&pf->pdev->dev,
 | |
| 				 "%s: VSI seid %d Tx ring %d %sable timeout\n",
 | |
| 				 __func__, vsi->seid, pf_q,
 | |
| 				 (enable ? "en" : "dis"));
 | |
| 			break;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	if (hw->revision_id == 0)
 | |
| 		mdelay(50);
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_pf_rxq_wait - Wait for a PF's Rx queue to be enabled or disabled
 | |
|  * @pf: the PF being configured
 | |
|  * @pf_q: the PF queue
 | |
|  * @enable: enable or disable state of the queue
 | |
|  *
 | |
|  * This routine will wait for the given Rx queue of the PF to reach the
 | |
|  * enabled or disabled state.
 | |
|  * Returns -ETIMEDOUT in case of failing to reach the requested state after
 | |
|  * multiple retries; else will return 0 in case of success.
 | |
|  **/
 | |
| static int i40e_pf_rxq_wait(struct i40e_pf *pf, int pf_q, bool enable)
 | |
| {
 | |
| 	int i;
 | |
| 	u32 rx_reg;
 | |
| 
 | |
| 	for (i = 0; i < I40E_QUEUE_WAIT_RETRY_LIMIT; i++) {
 | |
| 		rx_reg = rd32(&pf->hw, I40E_QRX_ENA(pf_q));
 | |
| 		if (enable == !!(rx_reg & I40E_QRX_ENA_QENA_STAT_MASK))
 | |
| 			break;
 | |
| 
 | |
| 		udelay(10);
 | |
| 	}
 | |
| 	if (i >= I40E_QUEUE_WAIT_RETRY_LIMIT)
 | |
| 		return -ETIMEDOUT;
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_vsi_control_rx - Start or stop a VSI's rings
 | |
|  * @vsi: the VSI being configured
 | |
|  * @enable: start or stop the rings
 | |
|  **/
 | |
| static int i40e_vsi_control_rx(struct i40e_vsi *vsi, bool enable)
 | |
| {
 | |
| 	struct i40e_pf *pf = vsi->back;
 | |
| 	struct i40e_hw *hw = &pf->hw;
 | |
| 	int i, j, pf_q, ret = 0;
 | |
| 	u32 rx_reg;
 | |
| 
 | |
| 	pf_q = vsi->base_queue;
 | |
| 	for (i = 0; i < vsi->num_queue_pairs; i++, pf_q++) {
 | |
| 		for (j = 0; j < 50; j++) {
 | |
| 			rx_reg = rd32(hw, I40E_QRX_ENA(pf_q));
 | |
| 			if (((rx_reg >> I40E_QRX_ENA_QENA_REQ_SHIFT) & 1) ==
 | |
| 			    ((rx_reg >> I40E_QRX_ENA_QENA_STAT_SHIFT) & 1))
 | |
| 				break;
 | |
| 			usleep_range(1000, 2000);
 | |
| 		}
 | |
| 
 | |
| 		/* Skip if the queue is already in the requested state */
 | |
| 		if (enable == !!(rx_reg & I40E_QRX_ENA_QENA_STAT_MASK))
 | |
| 			continue;
 | |
| 
 | |
| 		/* turn on/off the queue */
 | |
| 		if (enable)
 | |
| 			rx_reg |= I40E_QRX_ENA_QENA_REQ_MASK;
 | |
| 		else
 | |
| 			rx_reg &= ~I40E_QRX_ENA_QENA_REQ_MASK;
 | |
| 		wr32(hw, I40E_QRX_ENA(pf_q), rx_reg);
 | |
| 
 | |
| 		/* wait for the change to finish */
 | |
| 		ret = i40e_pf_rxq_wait(pf, pf_q, enable);
 | |
| 		if (ret) {
 | |
| 			dev_info(&pf->pdev->dev,
 | |
| 				 "%s: VSI seid %d Rx ring %d %sable timeout\n",
 | |
| 				 __func__, vsi->seid, pf_q,
 | |
| 				 (enable ? "en" : "dis"));
 | |
| 			break;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_vsi_control_rings - Start or stop a VSI's rings
 | |
|  * @vsi: the VSI being configured
 | |
|  * @enable: start or stop the rings
 | |
|  **/
 | |
| int i40e_vsi_control_rings(struct i40e_vsi *vsi, bool request)
 | |
| {
 | |
| 	int ret = 0;
 | |
| 
 | |
| 	/* do rx first for enable and last for disable */
 | |
| 	if (request) {
 | |
| 		ret = i40e_vsi_control_rx(vsi, request);
 | |
| 		if (ret)
 | |
| 			return ret;
 | |
| 		ret = i40e_vsi_control_tx(vsi, request);
 | |
| 	} else {
 | |
| 		/* Ignore return value, we need to shutdown whatever we can */
 | |
| 		i40e_vsi_control_tx(vsi, request);
 | |
| 		i40e_vsi_control_rx(vsi, request);
 | |
| 	}
 | |
| 
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_vsi_free_irq - Free the irq association with the OS
 | |
|  * @vsi: the VSI being configured
 | |
|  **/
 | |
| static void i40e_vsi_free_irq(struct i40e_vsi *vsi)
 | |
| {
 | |
| 	struct i40e_pf *pf = vsi->back;
 | |
| 	struct i40e_hw *hw = &pf->hw;
 | |
| 	int base = vsi->base_vector;
 | |
| 	u32 val, qp;
 | |
| 	int i;
 | |
| 
 | |
| 	if (pf->flags & I40E_FLAG_MSIX_ENABLED) {
 | |
| 		if (!vsi->q_vectors)
 | |
| 			return;
 | |
| 
 | |
| 		if (!vsi->irqs_ready)
 | |
| 			return;
 | |
| 
 | |
| 		vsi->irqs_ready = false;
 | |
| 		for (i = 0; i < vsi->num_q_vectors; i++) {
 | |
| 			u16 vector = i + base;
 | |
| 
 | |
| 			/* free only the irqs that were actually requested */
 | |
| 			if (!vsi->q_vectors[i] ||
 | |
| 			    !vsi->q_vectors[i]->num_ringpairs)
 | |
| 				continue;
 | |
| 
 | |
| 			/* clear the affinity_mask in the IRQ descriptor */
 | |
| 			irq_set_affinity_hint(pf->msix_entries[vector].vector,
 | |
| 					      NULL);
 | |
| 			free_irq(pf->msix_entries[vector].vector,
 | |
| 				 vsi->q_vectors[i]);
 | |
| 
 | |
| 			/* Tear down the interrupt queue link list
 | |
| 			 *
 | |
| 			 * We know that they come in pairs and always
 | |
| 			 * the Rx first, then the Tx.  To clear the
 | |
| 			 * link list, stick the EOL value into the
 | |
| 			 * next_q field of the registers.
 | |
| 			 */
 | |
| 			val = rd32(hw, I40E_PFINT_LNKLSTN(vector - 1));
 | |
| 			qp = (val & I40E_PFINT_LNKLSTN_FIRSTQ_INDX_MASK)
 | |
| 				>> I40E_PFINT_LNKLSTN_FIRSTQ_INDX_SHIFT;
 | |
| 			val |= I40E_QUEUE_END_OF_LIST
 | |
| 				<< I40E_PFINT_LNKLSTN_FIRSTQ_INDX_SHIFT;
 | |
| 			wr32(hw, I40E_PFINT_LNKLSTN(vector - 1), val);
 | |
| 
 | |
| 			while (qp != I40E_QUEUE_END_OF_LIST) {
 | |
| 				u32 next;
 | |
| 
 | |
| 				val = rd32(hw, I40E_QINT_RQCTL(qp));
 | |
| 
 | |
| 				val &= ~(I40E_QINT_RQCTL_MSIX_INDX_MASK  |
 | |
| 					 I40E_QINT_RQCTL_MSIX0_INDX_MASK |
 | |
| 					 I40E_QINT_RQCTL_CAUSE_ENA_MASK  |
 | |
| 					 I40E_QINT_RQCTL_INTEVENT_MASK);
 | |
| 
 | |
| 				val |= (I40E_QINT_RQCTL_ITR_INDX_MASK |
 | |
| 					 I40E_QINT_RQCTL_NEXTQ_INDX_MASK);
 | |
| 
 | |
| 				wr32(hw, I40E_QINT_RQCTL(qp), val);
 | |
| 
 | |
| 				val = rd32(hw, I40E_QINT_TQCTL(qp));
 | |
| 
 | |
| 				next = (val & I40E_QINT_TQCTL_NEXTQ_INDX_MASK)
 | |
| 					>> I40E_QINT_TQCTL_NEXTQ_INDX_SHIFT;
 | |
| 
 | |
| 				val &= ~(I40E_QINT_TQCTL_MSIX_INDX_MASK  |
 | |
| 					 I40E_QINT_TQCTL_MSIX0_INDX_MASK |
 | |
| 					 I40E_QINT_TQCTL_CAUSE_ENA_MASK  |
 | |
| 					 I40E_QINT_TQCTL_INTEVENT_MASK);
 | |
| 
 | |
| 				val |= (I40E_QINT_TQCTL_ITR_INDX_MASK |
 | |
| 					 I40E_QINT_TQCTL_NEXTQ_INDX_MASK);
 | |
| 
 | |
| 				wr32(hw, I40E_QINT_TQCTL(qp), val);
 | |
| 				qp = next;
 | |
| 			}
 | |
| 		}
 | |
| 	} else {
 | |
| 		free_irq(pf->pdev->irq, pf);
 | |
| 
 | |
| 		val = rd32(hw, I40E_PFINT_LNKLST0);
 | |
| 		qp = (val & I40E_PFINT_LNKLSTN_FIRSTQ_INDX_MASK)
 | |
| 			>> I40E_PFINT_LNKLSTN_FIRSTQ_INDX_SHIFT;
 | |
| 		val |= I40E_QUEUE_END_OF_LIST
 | |
| 			<< I40E_PFINT_LNKLST0_FIRSTQ_INDX_SHIFT;
 | |
| 		wr32(hw, I40E_PFINT_LNKLST0, val);
 | |
| 
 | |
| 		val = rd32(hw, I40E_QINT_RQCTL(qp));
 | |
| 		val &= ~(I40E_QINT_RQCTL_MSIX_INDX_MASK  |
 | |
| 			 I40E_QINT_RQCTL_MSIX0_INDX_MASK |
 | |
| 			 I40E_QINT_RQCTL_CAUSE_ENA_MASK  |
 | |
| 			 I40E_QINT_RQCTL_INTEVENT_MASK);
 | |
| 
 | |
| 		val |= (I40E_QINT_RQCTL_ITR_INDX_MASK |
 | |
| 			I40E_QINT_RQCTL_NEXTQ_INDX_MASK);
 | |
| 
 | |
| 		wr32(hw, I40E_QINT_RQCTL(qp), val);
 | |
| 
 | |
| 		val = rd32(hw, I40E_QINT_TQCTL(qp));
 | |
| 
 | |
| 		val &= ~(I40E_QINT_TQCTL_MSIX_INDX_MASK  |
 | |
| 			 I40E_QINT_TQCTL_MSIX0_INDX_MASK |
 | |
| 			 I40E_QINT_TQCTL_CAUSE_ENA_MASK  |
 | |
| 			 I40E_QINT_TQCTL_INTEVENT_MASK);
 | |
| 
 | |
| 		val |= (I40E_QINT_TQCTL_ITR_INDX_MASK |
 | |
| 			I40E_QINT_TQCTL_NEXTQ_INDX_MASK);
 | |
| 
 | |
| 		wr32(hw, I40E_QINT_TQCTL(qp), val);
 | |
| 	}
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_free_q_vector - Free memory allocated for specific interrupt vector
 | |
|  * @vsi: the VSI being configured
 | |
|  * @v_idx: Index of vector to be freed
 | |
|  *
 | |
|  * This function frees the memory allocated to the q_vector.  In addition if
 | |
|  * NAPI is enabled it will delete any references to the NAPI struct prior
 | |
|  * to freeing the q_vector.
 | |
|  **/
 | |
| static void i40e_free_q_vector(struct i40e_vsi *vsi, int v_idx)
 | |
| {
 | |
| 	struct i40e_q_vector *q_vector = vsi->q_vectors[v_idx];
 | |
| 	struct i40e_ring *ring;
 | |
| 
 | |
| 	if (!q_vector)
 | |
| 		return;
 | |
| 
 | |
| 	/* disassociate q_vector from rings */
 | |
| 	i40e_for_each_ring(ring, q_vector->tx)
 | |
| 		ring->q_vector = NULL;
 | |
| 
 | |
| 	i40e_for_each_ring(ring, q_vector->rx)
 | |
| 		ring->q_vector = NULL;
 | |
| 
 | |
| 	/* only VSI w/ an associated netdev is set up w/ NAPI */
 | |
| 	if (vsi->netdev)
 | |
| 		netif_napi_del(&q_vector->napi);
 | |
| 
 | |
| 	vsi->q_vectors[v_idx] = NULL;
 | |
| 
 | |
| 	kfree_rcu(q_vector, rcu);
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_vsi_free_q_vectors - Free memory allocated for interrupt vectors
 | |
|  * @vsi: the VSI being un-configured
 | |
|  *
 | |
|  * This frees the memory allocated to the q_vectors and
 | |
|  * deletes references to the NAPI struct.
 | |
|  **/
 | |
| static void i40e_vsi_free_q_vectors(struct i40e_vsi *vsi)
 | |
| {
 | |
| 	int v_idx;
 | |
| 
 | |
| 	for (v_idx = 0; v_idx < vsi->num_q_vectors; v_idx++)
 | |
| 		i40e_free_q_vector(vsi, v_idx);
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_reset_interrupt_capability - Disable interrupt setup in OS
 | |
|  * @pf: board private structure
 | |
|  **/
 | |
| static void i40e_reset_interrupt_capability(struct i40e_pf *pf)
 | |
| {
 | |
| 	/* If we're in Legacy mode, the interrupt was cleaned in vsi_close */
 | |
| 	if (pf->flags & I40E_FLAG_MSIX_ENABLED) {
 | |
| 		pci_disable_msix(pf->pdev);
 | |
| 		kfree(pf->msix_entries);
 | |
| 		pf->msix_entries = NULL;
 | |
| 	} else if (pf->flags & I40E_FLAG_MSI_ENABLED) {
 | |
| 		pci_disable_msi(pf->pdev);
 | |
| 	}
 | |
| 	pf->flags &= ~(I40E_FLAG_MSIX_ENABLED | I40E_FLAG_MSI_ENABLED);
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_clear_interrupt_scheme - Clear the current interrupt scheme settings
 | |
|  * @pf: board private structure
 | |
|  *
 | |
|  * We go through and clear interrupt specific resources and reset the structure
 | |
|  * to pre-load conditions
 | |
|  **/
 | |
| static void i40e_clear_interrupt_scheme(struct i40e_pf *pf)
 | |
| {
 | |
| 	int i;
 | |
| 
 | |
| 	i40e_put_lump(pf->irq_pile, 0, I40E_PILE_VALID_BIT-1);
 | |
| 	for (i = 0; i < pf->num_alloc_vsi; i++)
 | |
| 		if (pf->vsi[i])
 | |
| 			i40e_vsi_free_q_vectors(pf->vsi[i]);
 | |
| 	i40e_reset_interrupt_capability(pf);
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_napi_enable_all - Enable NAPI for all q_vectors in the VSI
 | |
|  * @vsi: the VSI being configured
 | |
|  **/
 | |
| static void i40e_napi_enable_all(struct i40e_vsi *vsi)
 | |
| {
 | |
| 	int q_idx;
 | |
| 
 | |
| 	if (!vsi->netdev)
 | |
| 		return;
 | |
| 
 | |
| 	for (q_idx = 0; q_idx < vsi->num_q_vectors; q_idx++)
 | |
| 		napi_enable(&vsi->q_vectors[q_idx]->napi);
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_napi_disable_all - Disable NAPI for all q_vectors in the VSI
 | |
|  * @vsi: the VSI being configured
 | |
|  **/
 | |
| static void i40e_napi_disable_all(struct i40e_vsi *vsi)
 | |
| {
 | |
| 	int q_idx;
 | |
| 
 | |
| 	if (!vsi->netdev)
 | |
| 		return;
 | |
| 
 | |
| 	for (q_idx = 0; q_idx < vsi->num_q_vectors; q_idx++)
 | |
| 		napi_disable(&vsi->q_vectors[q_idx]->napi);
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_vsi_close - Shut down a VSI
 | |
|  * @vsi: the vsi to be quelled
 | |
|  **/
 | |
| static void i40e_vsi_close(struct i40e_vsi *vsi)
 | |
| {
 | |
| 	if (!test_and_set_bit(__I40E_DOWN, &vsi->state))
 | |
| 		i40e_down(vsi);
 | |
| 	i40e_vsi_free_irq(vsi);
 | |
| 	i40e_vsi_free_tx_resources(vsi);
 | |
| 	i40e_vsi_free_rx_resources(vsi);
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_quiesce_vsi - Pause a given VSI
 | |
|  * @vsi: the VSI being paused
 | |
|  **/
 | |
| static void i40e_quiesce_vsi(struct i40e_vsi *vsi)
 | |
| {
 | |
| 	if (test_bit(__I40E_DOWN, &vsi->state))
 | |
| 		return;
 | |
| 
 | |
| 	set_bit(__I40E_NEEDS_RESTART, &vsi->state);
 | |
| 	if (vsi->netdev && netif_running(vsi->netdev)) {
 | |
| 		vsi->netdev->netdev_ops->ndo_stop(vsi->netdev);
 | |
| 	} else {
 | |
| 		i40e_vsi_close(vsi);
 | |
| 	}
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_unquiesce_vsi - Resume a given VSI
 | |
|  * @vsi: the VSI being resumed
 | |
|  **/
 | |
| static void i40e_unquiesce_vsi(struct i40e_vsi *vsi)
 | |
| {
 | |
| 	if (!test_bit(__I40E_NEEDS_RESTART, &vsi->state))
 | |
| 		return;
 | |
| 
 | |
| 	clear_bit(__I40E_NEEDS_RESTART, &vsi->state);
 | |
| 	if (vsi->netdev && netif_running(vsi->netdev))
 | |
| 		vsi->netdev->netdev_ops->ndo_open(vsi->netdev);
 | |
| 	else
 | |
| 		i40e_vsi_open(vsi);   /* this clears the DOWN bit */
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_pf_quiesce_all_vsi - Pause all VSIs on a PF
 | |
|  * @pf: the PF
 | |
|  **/
 | |
| static void i40e_pf_quiesce_all_vsi(struct i40e_pf *pf)
 | |
| {
 | |
| 	int v;
 | |
| 
 | |
| 	for (v = 0; v < pf->num_alloc_vsi; v++) {
 | |
| 		if (pf->vsi[v])
 | |
| 			i40e_quiesce_vsi(pf->vsi[v]);
 | |
| 	}
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_pf_unquiesce_all_vsi - Resume all VSIs on a PF
 | |
|  * @pf: the PF
 | |
|  **/
 | |
| static void i40e_pf_unquiesce_all_vsi(struct i40e_pf *pf)
 | |
| {
 | |
| 	int v;
 | |
| 
 | |
| 	for (v = 0; v < pf->num_alloc_vsi; v++) {
 | |
| 		if (pf->vsi[v])
 | |
| 			i40e_unquiesce_vsi(pf->vsi[v]);
 | |
| 	}
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_dcb_get_num_tc -  Get the number of TCs from DCBx config
 | |
|  * @dcbcfg: the corresponding DCBx configuration structure
 | |
|  *
 | |
|  * Return the number of TCs from given DCBx configuration
 | |
|  **/
 | |
| static u8 i40e_dcb_get_num_tc(struct i40e_dcbx_config *dcbcfg)
 | |
| {
 | |
| 	u8 num_tc = 0;
 | |
| 	int i;
 | |
| 
 | |
| 	/* Scan the ETS Config Priority Table to find
 | |
| 	 * traffic class enabled for a given priority
 | |
| 	 * and use the traffic class index to get the
 | |
| 	 * number of traffic classes enabled
 | |
| 	 */
 | |
| 	for (i = 0; i < I40E_MAX_USER_PRIORITY; i++) {
 | |
| 		if (dcbcfg->etscfg.prioritytable[i] > num_tc)
 | |
| 			num_tc = dcbcfg->etscfg.prioritytable[i];
 | |
| 	}
 | |
| 
 | |
| 	/* Traffic class index starts from zero so
 | |
| 	 * increment to return the actual count
 | |
| 	 */
 | |
| 	return num_tc + 1;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_dcb_get_enabled_tc - Get enabled traffic classes
 | |
|  * @dcbcfg: the corresponding DCBx configuration structure
 | |
|  *
 | |
|  * Query the current DCB configuration and return the number of
 | |
|  * traffic classes enabled from the given DCBX config
 | |
|  **/
 | |
| static u8 i40e_dcb_get_enabled_tc(struct i40e_dcbx_config *dcbcfg)
 | |
| {
 | |
| 	u8 num_tc = i40e_dcb_get_num_tc(dcbcfg);
 | |
| 	u8 enabled_tc = 1;
 | |
| 	u8 i;
 | |
| 
 | |
| 	for (i = 0; i < num_tc; i++)
 | |
| 		enabled_tc |= 1 << i;
 | |
| 
 | |
| 	return enabled_tc;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_pf_get_num_tc - Get enabled traffic classes for PF
 | |
|  * @pf: PF being queried
 | |
|  *
 | |
|  * Return number of traffic classes enabled for the given PF
 | |
|  **/
 | |
| static u8 i40e_pf_get_num_tc(struct i40e_pf *pf)
 | |
| {
 | |
| 	struct i40e_hw *hw = &pf->hw;
 | |
| 	u8 i, enabled_tc;
 | |
| 	u8 num_tc = 0;
 | |
| 	struct i40e_dcbx_config *dcbcfg = &hw->local_dcbx_config;
 | |
| 
 | |
| 	/* If DCB is not enabled then always in single TC */
 | |
| 	if (!(pf->flags & I40E_FLAG_DCB_ENABLED))
 | |
| 		return 1;
 | |
| 
 | |
| 	/* MFP mode return count of enabled TCs for this PF */
 | |
| 	if (pf->flags & I40E_FLAG_MFP_ENABLED) {
 | |
| 		enabled_tc = pf->hw.func_caps.enabled_tcmap;
 | |
| 		for (i = 0; i < I40E_MAX_TRAFFIC_CLASS; i++) {
 | |
| 			if (enabled_tc & (1 << i))
 | |
| 				num_tc++;
 | |
| 		}
 | |
| 		return num_tc;
 | |
| 	}
 | |
| 
 | |
| 	/* SFP mode will be enabled for all TCs on port */
 | |
| 	return i40e_dcb_get_num_tc(dcbcfg);
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_pf_get_default_tc - Get bitmap for first enabled TC
 | |
|  * @pf: PF being queried
 | |
|  *
 | |
|  * Return a bitmap for first enabled traffic class for this PF.
 | |
|  **/
 | |
| static u8 i40e_pf_get_default_tc(struct i40e_pf *pf)
 | |
| {
 | |
| 	u8 enabled_tc = pf->hw.func_caps.enabled_tcmap;
 | |
| 	u8 i = 0;
 | |
| 
 | |
| 	if (!enabled_tc)
 | |
| 		return 0x1; /* TC0 */
 | |
| 
 | |
| 	/* Find the first enabled TC */
 | |
| 	for (i = 0; i < I40E_MAX_TRAFFIC_CLASS; i++) {
 | |
| 		if (enabled_tc & (1 << i))
 | |
| 			break;
 | |
| 	}
 | |
| 
 | |
| 	return 1 << i;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_pf_get_pf_tc_map - Get bitmap for enabled traffic classes
 | |
|  * @pf: PF being queried
 | |
|  *
 | |
|  * Return a bitmap for enabled traffic classes for this PF.
 | |
|  **/
 | |
| static u8 i40e_pf_get_tc_map(struct i40e_pf *pf)
 | |
| {
 | |
| 	/* If DCB is not enabled for this PF then just return default TC */
 | |
| 	if (!(pf->flags & I40E_FLAG_DCB_ENABLED))
 | |
| 		return i40e_pf_get_default_tc(pf);
 | |
| 
 | |
| 	/* MFP mode will have enabled TCs set by FW */
 | |
| 	if (pf->flags & I40E_FLAG_MFP_ENABLED)
 | |
| 		return pf->hw.func_caps.enabled_tcmap;
 | |
| 
 | |
| 	/* SFP mode we want PF to be enabled for all TCs */
 | |
| 	return i40e_dcb_get_enabled_tc(&pf->hw.local_dcbx_config);
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_vsi_get_bw_info - Query VSI BW Information
 | |
|  * @vsi: the VSI being queried
 | |
|  *
 | |
|  * Returns 0 on success, negative value on failure
 | |
|  **/
 | |
| static int i40e_vsi_get_bw_info(struct i40e_vsi *vsi)
 | |
| {
 | |
| 	struct i40e_aqc_query_vsi_ets_sla_config_resp bw_ets_config = {0};
 | |
| 	struct i40e_aqc_query_vsi_bw_config_resp bw_config = {0};
 | |
| 	struct i40e_pf *pf = vsi->back;
 | |
| 	struct i40e_hw *hw = &pf->hw;
 | |
| 	i40e_status aq_ret;
 | |
| 	u32 tc_bw_max;
 | |
| 	int i;
 | |
| 
 | |
| 	/* Get the VSI level BW configuration */
 | |
| 	aq_ret = i40e_aq_query_vsi_bw_config(hw, vsi->seid, &bw_config, NULL);
 | |
| 	if (aq_ret) {
 | |
| 		dev_info(&pf->pdev->dev,
 | |
| 			 "couldn't get pf vsi bw config, err %d, aq_err %d\n",
 | |
| 			 aq_ret, pf->hw.aq.asq_last_status);
 | |
| 		return -EINVAL;
 | |
| 	}
 | |
| 
 | |
| 	/* Get the VSI level BW configuration per TC */
 | |
| 	aq_ret = i40e_aq_query_vsi_ets_sla_config(hw, vsi->seid, &bw_ets_config,
 | |
| 						  NULL);
 | |
| 	if (aq_ret) {
 | |
| 		dev_info(&pf->pdev->dev,
 | |
| 			 "couldn't get pf vsi ets bw config, err %d, aq_err %d\n",
 | |
| 			 aq_ret, pf->hw.aq.asq_last_status);
 | |
| 		return -EINVAL;
 | |
| 	}
 | |
| 
 | |
| 	if (bw_config.tc_valid_bits != bw_ets_config.tc_valid_bits) {
 | |
| 		dev_info(&pf->pdev->dev,
 | |
| 			 "Enabled TCs mismatch from querying VSI BW info 0x%08x 0x%08x\n",
 | |
| 			 bw_config.tc_valid_bits,
 | |
| 			 bw_ets_config.tc_valid_bits);
 | |
| 		/* Still continuing */
 | |
| 	}
 | |
| 
 | |
| 	vsi->bw_limit = le16_to_cpu(bw_config.port_bw_limit);
 | |
| 	vsi->bw_max_quanta = bw_config.max_bw;
 | |
| 	tc_bw_max = le16_to_cpu(bw_ets_config.tc_bw_max[0]) |
 | |
| 		    (le16_to_cpu(bw_ets_config.tc_bw_max[1]) << 16);
 | |
| 	for (i = 0; i < I40E_MAX_TRAFFIC_CLASS; i++) {
 | |
| 		vsi->bw_ets_share_credits[i] = bw_ets_config.share_credits[i];
 | |
| 		vsi->bw_ets_limit_credits[i] =
 | |
| 					le16_to_cpu(bw_ets_config.credits[i]);
 | |
| 		/* 3 bits out of 4 for each TC */
 | |
| 		vsi->bw_ets_max_quanta[i] = (u8)((tc_bw_max >> (i*4)) & 0x7);
 | |
| 	}
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_vsi_configure_bw_alloc - Configure VSI BW allocation per TC
 | |
|  * @vsi: the VSI being configured
 | |
|  * @enabled_tc: TC bitmap
 | |
|  * @bw_credits: BW shared credits per TC
 | |
|  *
 | |
|  * Returns 0 on success, negative value on failure
 | |
|  **/
 | |
| static int i40e_vsi_configure_bw_alloc(struct i40e_vsi *vsi, u8 enabled_tc,
 | |
| 				       u8 *bw_share)
 | |
| {
 | |
| 	struct i40e_aqc_configure_vsi_tc_bw_data bw_data;
 | |
| 	i40e_status aq_ret;
 | |
| 	int i;
 | |
| 
 | |
| 	bw_data.tc_valid_bits = enabled_tc;
 | |
| 	for (i = 0; i < I40E_MAX_TRAFFIC_CLASS; i++)
 | |
| 		bw_data.tc_bw_credits[i] = bw_share[i];
 | |
| 
 | |
| 	aq_ret = i40e_aq_config_vsi_tc_bw(&vsi->back->hw, vsi->seid, &bw_data,
 | |
| 					  NULL);
 | |
| 	if (aq_ret) {
 | |
| 		dev_info(&vsi->back->pdev->dev,
 | |
| 			 "AQ command Config VSI BW allocation per TC failed = %d\n",
 | |
| 			 vsi->back->hw.aq.asq_last_status);
 | |
| 		return -EINVAL;
 | |
| 	}
 | |
| 
 | |
| 	for (i = 0; i < I40E_MAX_TRAFFIC_CLASS; i++)
 | |
| 		vsi->info.qs_handle[i] = bw_data.qs_handles[i];
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_vsi_config_netdev_tc - Setup the netdev TC configuration
 | |
|  * @vsi: the VSI being configured
 | |
|  * @enabled_tc: TC map to be enabled
 | |
|  *
 | |
|  **/
 | |
| static void i40e_vsi_config_netdev_tc(struct i40e_vsi *vsi, u8 enabled_tc)
 | |
| {
 | |
| 	struct net_device *netdev = vsi->netdev;
 | |
| 	struct i40e_pf *pf = vsi->back;
 | |
| 	struct i40e_hw *hw = &pf->hw;
 | |
| 	u8 netdev_tc = 0;
 | |
| 	int i;
 | |
| 	struct i40e_dcbx_config *dcbcfg = &hw->local_dcbx_config;
 | |
| 
 | |
| 	if (!netdev)
 | |
| 		return;
 | |
| 
 | |
| 	if (!enabled_tc) {
 | |
| 		netdev_reset_tc(netdev);
 | |
| 		return;
 | |
| 	}
 | |
| 
 | |
| 	/* Set up actual enabled TCs on the VSI */
 | |
| 	if (netdev_set_num_tc(netdev, vsi->tc_config.numtc))
 | |
| 		return;
 | |
| 
 | |
| 	/* set per TC queues for the VSI */
 | |
| 	for (i = 0; i < I40E_MAX_TRAFFIC_CLASS; i++) {
 | |
| 		/* Only set TC queues for enabled tcs
 | |
| 		 *
 | |
| 		 * e.g. For a VSI that has TC0 and TC3 enabled the
 | |
| 		 * enabled_tc bitmap would be 0x00001001; the driver
 | |
| 		 * will set the numtc for netdev as 2 that will be
 | |
| 		 * referenced by the netdev layer as TC 0 and 1.
 | |
| 		 */
 | |
| 		if (vsi->tc_config.enabled_tc & (1 << i))
 | |
| 			netdev_set_tc_queue(netdev,
 | |
| 					vsi->tc_config.tc_info[i].netdev_tc,
 | |
| 					vsi->tc_config.tc_info[i].qcount,
 | |
| 					vsi->tc_config.tc_info[i].qoffset);
 | |
| 	}
 | |
| 
 | |
| 	/* Assign UP2TC map for the VSI */
 | |
| 	for (i = 0; i < I40E_MAX_USER_PRIORITY; i++) {
 | |
| 		/* Get the actual TC# for the UP */
 | |
| 		u8 ets_tc = dcbcfg->etscfg.prioritytable[i];
 | |
| 		/* Get the mapped netdev TC# for the UP */
 | |
| 		netdev_tc =  vsi->tc_config.tc_info[ets_tc].netdev_tc;
 | |
| 		netdev_set_prio_tc_map(netdev, i, netdev_tc);
 | |
| 	}
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_vsi_update_queue_map - Update our copy of VSi info with new queue map
 | |
|  * @vsi: the VSI being configured
 | |
|  * @ctxt: the ctxt buffer returned from AQ VSI update param command
 | |
|  **/
 | |
| static void i40e_vsi_update_queue_map(struct i40e_vsi *vsi,
 | |
| 				      struct i40e_vsi_context *ctxt)
 | |
| {
 | |
| 	/* copy just the sections touched not the entire info
 | |
| 	 * since not all sections are valid as returned by
 | |
| 	 * update vsi params
 | |
| 	 */
 | |
| 	vsi->info.mapping_flags = ctxt->info.mapping_flags;
 | |
| 	memcpy(&vsi->info.queue_mapping,
 | |
| 	       &ctxt->info.queue_mapping, sizeof(vsi->info.queue_mapping));
 | |
| 	memcpy(&vsi->info.tc_mapping, ctxt->info.tc_mapping,
 | |
| 	       sizeof(vsi->info.tc_mapping));
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_vsi_config_tc - Configure VSI Tx Scheduler for given TC map
 | |
|  * @vsi: VSI to be configured
 | |
|  * @enabled_tc: TC bitmap
 | |
|  *
 | |
|  * This configures a particular VSI for TCs that are mapped to the
 | |
|  * given TC bitmap. It uses default bandwidth share for TCs across
 | |
|  * VSIs to configure TC for a particular VSI.
 | |
|  *
 | |
|  * NOTE:
 | |
|  * It is expected that the VSI queues have been quisced before calling
 | |
|  * this function.
 | |
|  **/
 | |
| static int i40e_vsi_config_tc(struct i40e_vsi *vsi, u8 enabled_tc)
 | |
| {
 | |
| 	u8 bw_share[I40E_MAX_TRAFFIC_CLASS] = {0};
 | |
| 	struct i40e_vsi_context ctxt;
 | |
| 	int ret = 0;
 | |
| 	int i;
 | |
| 
 | |
| 	/* Check if enabled_tc is same as existing or new TCs */
 | |
| 	if (vsi->tc_config.enabled_tc == enabled_tc)
 | |
| 		return ret;
 | |
| 
 | |
| 	/* Enable ETS TCs with equal BW Share for now across all VSIs */
 | |
| 	for (i = 0; i < I40E_MAX_TRAFFIC_CLASS; i++) {
 | |
| 		if (enabled_tc & (1 << i))
 | |
| 			bw_share[i] = 1;
 | |
| 	}
 | |
| 
 | |
| 	ret = i40e_vsi_configure_bw_alloc(vsi, enabled_tc, bw_share);
 | |
| 	if (ret) {
 | |
| 		dev_info(&vsi->back->pdev->dev,
 | |
| 			 "Failed configuring TC map %d for VSI %d\n",
 | |
| 			 enabled_tc, vsi->seid);
 | |
| 		goto out;
 | |
| 	}
 | |
| 
 | |
| 	/* Update Queue Pairs Mapping for currently enabled UPs */
 | |
| 	ctxt.seid = vsi->seid;
 | |
| 	ctxt.pf_num = vsi->back->hw.pf_id;
 | |
| 	ctxt.vf_num = 0;
 | |
| 	ctxt.uplink_seid = vsi->uplink_seid;
 | |
| 	memcpy(&ctxt.info, &vsi->info, sizeof(vsi->info));
 | |
| 	i40e_vsi_setup_queue_map(vsi, &ctxt, enabled_tc, false);
 | |
| 
 | |
| 	/* Update the VSI after updating the VSI queue-mapping information */
 | |
| 	ret = i40e_aq_update_vsi_params(&vsi->back->hw, &ctxt, NULL);
 | |
| 	if (ret) {
 | |
| 		dev_info(&vsi->back->pdev->dev,
 | |
| 			 "update vsi failed, aq_err=%d\n",
 | |
| 			 vsi->back->hw.aq.asq_last_status);
 | |
| 		goto out;
 | |
| 	}
 | |
| 	/* update the local VSI info with updated queue map */
 | |
| 	i40e_vsi_update_queue_map(vsi, &ctxt);
 | |
| 	vsi->info.valid_sections = 0;
 | |
| 
 | |
| 	/* Update current VSI BW information */
 | |
| 	ret = i40e_vsi_get_bw_info(vsi);
 | |
| 	if (ret) {
 | |
| 		dev_info(&vsi->back->pdev->dev,
 | |
| 			 "Failed updating vsi bw info, aq_err=%d\n",
 | |
| 			 vsi->back->hw.aq.asq_last_status);
 | |
| 		goto out;
 | |
| 	}
 | |
| 
 | |
| 	/* Update the netdev TC setup */
 | |
| 	i40e_vsi_config_netdev_tc(vsi, enabled_tc);
 | |
| out:
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_veb_config_tc - Configure TCs for given VEB
 | |
|  * @veb: given VEB
 | |
|  * @enabled_tc: TC bitmap
 | |
|  *
 | |
|  * Configures given TC bitmap for VEB (switching) element
 | |
|  **/
 | |
| int i40e_veb_config_tc(struct i40e_veb *veb, u8 enabled_tc)
 | |
| {
 | |
| 	struct i40e_aqc_configure_switching_comp_bw_config_data bw_data = {0};
 | |
| 	struct i40e_pf *pf = veb->pf;
 | |
| 	int ret = 0;
 | |
| 	int i;
 | |
| 
 | |
| 	/* No TCs or already enabled TCs just return */
 | |
| 	if (!enabled_tc || veb->enabled_tc == enabled_tc)
 | |
| 		return ret;
 | |
| 
 | |
| 	bw_data.tc_valid_bits = enabled_tc;
 | |
| 	/* bw_data.absolute_credits is not set (relative) */
 | |
| 
 | |
| 	/* Enable ETS TCs with equal BW Share for now */
 | |
| 	for (i = 0; i < I40E_MAX_TRAFFIC_CLASS; i++) {
 | |
| 		if (enabled_tc & (1 << i))
 | |
| 			bw_data.tc_bw_share_credits[i] = 1;
 | |
| 	}
 | |
| 
 | |
| 	ret = i40e_aq_config_switch_comp_bw_config(&pf->hw, veb->seid,
 | |
| 						   &bw_data, NULL);
 | |
| 	if (ret) {
 | |
| 		dev_info(&pf->pdev->dev,
 | |
| 			 "veb bw config failed, aq_err=%d\n",
 | |
| 			 pf->hw.aq.asq_last_status);
 | |
| 		goto out;
 | |
| 	}
 | |
| 
 | |
| 	/* Update the BW information */
 | |
| 	ret = i40e_veb_get_bw_info(veb);
 | |
| 	if (ret) {
 | |
| 		dev_info(&pf->pdev->dev,
 | |
| 			 "Failed getting veb bw config, aq_err=%d\n",
 | |
| 			 pf->hw.aq.asq_last_status);
 | |
| 	}
 | |
| 
 | |
| out:
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| #ifdef CONFIG_I40E_DCB
 | |
| /**
 | |
|  * i40e_dcb_reconfigure - Reconfigure all VEBs and VSIs
 | |
|  * @pf: PF struct
 | |
|  *
 | |
|  * Reconfigure VEB/VSIs on a given PF; it is assumed that
 | |
|  * the caller would've quiesce all the VSIs before calling
 | |
|  * this function
 | |
|  **/
 | |
| static void i40e_dcb_reconfigure(struct i40e_pf *pf)
 | |
| {
 | |
| 	u8 tc_map = 0;
 | |
| 	int ret;
 | |
| 	u8 v;
 | |
| 
 | |
| 	/* Enable the TCs available on PF to all VEBs */
 | |
| 	tc_map = i40e_pf_get_tc_map(pf);
 | |
| 	for (v = 0; v < I40E_MAX_VEB; v++) {
 | |
| 		if (!pf->veb[v])
 | |
| 			continue;
 | |
| 		ret = i40e_veb_config_tc(pf->veb[v], tc_map);
 | |
| 		if (ret) {
 | |
| 			dev_info(&pf->pdev->dev,
 | |
| 				 "Failed configuring TC for VEB seid=%d\n",
 | |
| 				 pf->veb[v]->seid);
 | |
| 			/* Will try to configure as many components */
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	/* Update each VSI */
 | |
| 	for (v = 0; v < pf->num_alloc_vsi; v++) {
 | |
| 		if (!pf->vsi[v])
 | |
| 			continue;
 | |
| 
 | |
| 		/* - Enable all TCs for the LAN VSI
 | |
| #ifdef I40E_FCOE
 | |
| 		 * - For FCoE VSI only enable the TC configured
 | |
| 		 *   as per the APP TLV
 | |
| #endif
 | |
| 		 * - For all others keep them at TC0 for now
 | |
| 		 */
 | |
| 		if (v == pf->lan_vsi)
 | |
| 			tc_map = i40e_pf_get_tc_map(pf);
 | |
| 		else
 | |
| 			tc_map = i40e_pf_get_default_tc(pf);
 | |
| #ifdef I40E_FCOE
 | |
| 		if (pf->vsi[v]->type == I40E_VSI_FCOE)
 | |
| 			tc_map = i40e_get_fcoe_tc_map(pf);
 | |
| #endif /* #ifdef I40E_FCOE */
 | |
| 
 | |
| 		ret = i40e_vsi_config_tc(pf->vsi[v], tc_map);
 | |
| 		if (ret) {
 | |
| 			dev_info(&pf->pdev->dev,
 | |
| 				 "Failed configuring TC for VSI seid=%d\n",
 | |
| 				 pf->vsi[v]->seid);
 | |
| 			/* Will try to configure as many components */
 | |
| 		} else {
 | |
| 			/* Re-configure VSI vectors based on updated TC map */
 | |
| 			i40e_vsi_map_rings_to_vectors(pf->vsi[v]);
 | |
| 			if (pf->vsi[v]->netdev)
 | |
| 				i40e_dcbnl_set_all(pf->vsi[v]);
 | |
| 		}
 | |
| 	}
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_init_pf_dcb - Initialize DCB configuration
 | |
|  * @pf: PF being configured
 | |
|  *
 | |
|  * Query the current DCB configuration and cache it
 | |
|  * in the hardware structure
 | |
|  **/
 | |
| static int i40e_init_pf_dcb(struct i40e_pf *pf)
 | |
| {
 | |
| 	struct i40e_hw *hw = &pf->hw;
 | |
| 	int err = 0;
 | |
| 
 | |
| 	if (pf->hw.func_caps.npar_enable)
 | |
| 		goto out;
 | |
| 
 | |
| 	/* Get the initial DCB configuration */
 | |
| 	err = i40e_init_dcb(hw);
 | |
| 	if (!err) {
 | |
| 		/* Device/Function is not DCBX capable */
 | |
| 		if ((!hw->func_caps.dcb) ||
 | |
| 		    (hw->dcbx_status == I40E_DCBX_STATUS_DISABLED)) {
 | |
| 			dev_info(&pf->pdev->dev,
 | |
| 				 "DCBX offload is not supported or is disabled for this PF.\n");
 | |
| 
 | |
| 			if (pf->flags & I40E_FLAG_MFP_ENABLED)
 | |
| 				goto out;
 | |
| 
 | |
| 		} else {
 | |
| 			/* When status is not DISABLED then DCBX in FW */
 | |
| 			pf->dcbx_cap = DCB_CAP_DCBX_LLD_MANAGED |
 | |
| 				       DCB_CAP_DCBX_VER_IEEE;
 | |
| 
 | |
| 			pf->flags |= I40E_FLAG_DCB_CAPABLE;
 | |
| 			/* Enable DCB tagging only when more than one TC */
 | |
| 			if (i40e_dcb_get_num_tc(&hw->local_dcbx_config) > 1)
 | |
| 				pf->flags |= I40E_FLAG_DCB_ENABLED;
 | |
| 		}
 | |
| 	} else {
 | |
| 		dev_info(&pf->pdev->dev, "AQ Querying DCB configuration failed: %d\n",
 | |
| 			 pf->hw.aq.asq_last_status);
 | |
| 	}
 | |
| 
 | |
| out:
 | |
| 	return err;
 | |
| }
 | |
| #endif /* CONFIG_I40E_DCB */
 | |
| #define SPEED_SIZE 14
 | |
| #define FC_SIZE 8
 | |
| /**
 | |
|  * i40e_print_link_message - print link up or down
 | |
|  * @vsi: the VSI for which link needs a message
 | |
|  */
 | |
| static void i40e_print_link_message(struct i40e_vsi *vsi, bool isup)
 | |
| {
 | |
| 	char speed[SPEED_SIZE] = "Unknown";
 | |
| 	char fc[FC_SIZE] = "RX/TX";
 | |
| 
 | |
| 	if (!isup) {
 | |
| 		netdev_info(vsi->netdev, "NIC Link is Down\n");
 | |
| 		return;
 | |
| 	}
 | |
| 
 | |
| 	switch (vsi->back->hw.phy.link_info.link_speed) {
 | |
| 	case I40E_LINK_SPEED_40GB:
 | |
| 		strlcpy(speed, "40 Gbps", SPEED_SIZE);
 | |
| 		break;
 | |
| 	case I40E_LINK_SPEED_10GB:
 | |
| 		strlcpy(speed, "10 Gbps", SPEED_SIZE);
 | |
| 		break;
 | |
| 	case I40E_LINK_SPEED_1GB:
 | |
| 		strlcpy(speed, "1000 Mbps", SPEED_SIZE);
 | |
| 		break;
 | |
| 	default:
 | |
| 		break;
 | |
| 	}
 | |
| 
 | |
| 	switch (vsi->back->hw.fc.current_mode) {
 | |
| 	case I40E_FC_FULL:
 | |
| 		strlcpy(fc, "RX/TX", FC_SIZE);
 | |
| 		break;
 | |
| 	case I40E_FC_TX_PAUSE:
 | |
| 		strlcpy(fc, "TX", FC_SIZE);
 | |
| 		break;
 | |
| 	case I40E_FC_RX_PAUSE:
 | |
| 		strlcpy(fc, "RX", FC_SIZE);
 | |
| 		break;
 | |
| 	default:
 | |
| 		strlcpy(fc, "None", FC_SIZE);
 | |
| 		break;
 | |
| 	}
 | |
| 
 | |
| 	netdev_info(vsi->netdev, "NIC Link is Up %s Full Duplex, Flow Control: %s\n",
 | |
| 		    speed, fc);
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_up_complete - Finish the last steps of bringing up a connection
 | |
|  * @vsi: the VSI being configured
 | |
|  **/
 | |
| static int i40e_up_complete(struct i40e_vsi *vsi)
 | |
| {
 | |
| 	struct i40e_pf *pf = vsi->back;
 | |
| 	u8 set_fc_aq_fail = 0;
 | |
| 	int err;
 | |
| 
 | |
| 	/* force flow control off */
 | |
| 	i40e_set_fc(&pf->hw, &set_fc_aq_fail, true);
 | |
| 
 | |
| 	if (pf->flags & I40E_FLAG_MSIX_ENABLED)
 | |
| 		i40e_vsi_configure_msix(vsi);
 | |
| 	else
 | |
| 		i40e_configure_msi_and_legacy(vsi);
 | |
| 
 | |
| 	/* start rings */
 | |
| 	err = i40e_vsi_control_rings(vsi, true);
 | |
| 	if (err)
 | |
| 		return err;
 | |
| 
 | |
| 	clear_bit(__I40E_DOWN, &vsi->state);
 | |
| 	i40e_napi_enable_all(vsi);
 | |
| 	i40e_vsi_enable_irq(vsi);
 | |
| 
 | |
| 	if ((pf->hw.phy.link_info.link_info & I40E_AQ_LINK_UP) &&
 | |
| 	    (vsi->netdev)) {
 | |
| 		i40e_print_link_message(vsi, true);
 | |
| 		netif_tx_start_all_queues(vsi->netdev);
 | |
| 		netif_carrier_on(vsi->netdev);
 | |
| 	} else if (vsi->netdev) {
 | |
| 		i40e_print_link_message(vsi, false);
 | |
| 	}
 | |
| 
 | |
| 	/* replay FDIR SB filters */
 | |
| 	if (vsi->type == I40E_VSI_FDIR)
 | |
| 		i40e_fdir_filter_restore(vsi);
 | |
| 	i40e_service_event_schedule(pf);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_vsi_reinit_locked - Reset the VSI
 | |
|  * @vsi: the VSI being configured
 | |
|  *
 | |
|  * Rebuild the ring structs after some configuration
 | |
|  * has changed, e.g. MTU size.
 | |
|  **/
 | |
| static void i40e_vsi_reinit_locked(struct i40e_vsi *vsi)
 | |
| {
 | |
| 	struct i40e_pf *pf = vsi->back;
 | |
| 
 | |
| 	WARN_ON(in_interrupt());
 | |
| 	while (test_and_set_bit(__I40E_CONFIG_BUSY, &pf->state))
 | |
| 		usleep_range(1000, 2000);
 | |
| 	i40e_down(vsi);
 | |
| 
 | |
| 	/* Give a VF some time to respond to the reset.  The
 | |
| 	 * two second wait is based upon the watchdog cycle in
 | |
| 	 * the VF driver.
 | |
| 	 */
 | |
| 	if (vsi->type == I40E_VSI_SRIOV)
 | |
| 		msleep(2000);
 | |
| 	i40e_up(vsi);
 | |
| 	clear_bit(__I40E_CONFIG_BUSY, &pf->state);
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_up - Bring the connection back up after being down
 | |
|  * @vsi: the VSI being configured
 | |
|  **/
 | |
| int i40e_up(struct i40e_vsi *vsi)
 | |
| {
 | |
| 	int err;
 | |
| 
 | |
| 	err = i40e_vsi_configure(vsi);
 | |
| 	if (!err)
 | |
| 		err = i40e_up_complete(vsi);
 | |
| 
 | |
| 	return err;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_down - Shutdown the connection processing
 | |
|  * @vsi: the VSI being stopped
 | |
|  **/
 | |
| void i40e_down(struct i40e_vsi *vsi)
 | |
| {
 | |
| 	int i;
 | |
| 
 | |
| 	/* It is assumed that the caller of this function
 | |
| 	 * sets the vsi->state __I40E_DOWN bit.
 | |
| 	 */
 | |
| 	if (vsi->netdev) {
 | |
| 		netif_carrier_off(vsi->netdev);
 | |
| 		netif_tx_disable(vsi->netdev);
 | |
| 	}
 | |
| 	i40e_vsi_disable_irq(vsi);
 | |
| 	i40e_vsi_control_rings(vsi, false);
 | |
| 	i40e_napi_disable_all(vsi);
 | |
| 
 | |
| 	for (i = 0; i < vsi->num_queue_pairs; i++) {
 | |
| 		i40e_clean_tx_ring(vsi->tx_rings[i]);
 | |
| 		i40e_clean_rx_ring(vsi->rx_rings[i]);
 | |
| 	}
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_setup_tc - configure multiple traffic classes
 | |
|  * @netdev: net device to configure
 | |
|  * @tc: number of traffic classes to enable
 | |
|  **/
 | |
| #ifdef I40E_FCOE
 | |
| int i40e_setup_tc(struct net_device *netdev, u8 tc)
 | |
| #else
 | |
| static int i40e_setup_tc(struct net_device *netdev, u8 tc)
 | |
| #endif
 | |
| {
 | |
| 	struct i40e_netdev_priv *np = netdev_priv(netdev);
 | |
| 	struct i40e_vsi *vsi = np->vsi;
 | |
| 	struct i40e_pf *pf = vsi->back;
 | |
| 	u8 enabled_tc = 0;
 | |
| 	int ret = -EINVAL;
 | |
| 	int i;
 | |
| 
 | |
| 	/* Check if DCB enabled to continue */
 | |
| 	if (!(pf->flags & I40E_FLAG_DCB_ENABLED)) {
 | |
| 		netdev_info(netdev, "DCB is not enabled for adapter\n");
 | |
| 		goto exit;
 | |
| 	}
 | |
| 
 | |
| 	/* Check if MFP enabled */
 | |
| 	if (pf->flags & I40E_FLAG_MFP_ENABLED) {
 | |
| 		netdev_info(netdev, "Configuring TC not supported in MFP mode\n");
 | |
| 		goto exit;
 | |
| 	}
 | |
| 
 | |
| 	/* Check whether tc count is within enabled limit */
 | |
| 	if (tc > i40e_pf_get_num_tc(pf)) {
 | |
| 		netdev_info(netdev, "TC count greater than enabled on link for adapter\n");
 | |
| 		goto exit;
 | |
| 	}
 | |
| 
 | |
| 	/* Generate TC map for number of tc requested */
 | |
| 	for (i = 0; i < tc; i++)
 | |
| 		enabled_tc |= (1 << i);
 | |
| 
 | |
| 	/* Requesting same TC configuration as already enabled */
 | |
| 	if (enabled_tc == vsi->tc_config.enabled_tc)
 | |
| 		return 0;
 | |
| 
 | |
| 	/* Quiesce VSI queues */
 | |
| 	i40e_quiesce_vsi(vsi);
 | |
| 
 | |
| 	/* Configure VSI for enabled TCs */
 | |
| 	ret = i40e_vsi_config_tc(vsi, enabled_tc);
 | |
| 	if (ret) {
 | |
| 		netdev_info(netdev, "Failed configuring TC for VSI seid=%d\n",
 | |
| 			    vsi->seid);
 | |
| 		goto exit;
 | |
| 	}
 | |
| 
 | |
| 	/* Unquiesce VSI */
 | |
| 	i40e_unquiesce_vsi(vsi);
 | |
| 
 | |
| exit:
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_open - Called when a network interface is made active
 | |
|  * @netdev: network interface device structure
 | |
|  *
 | |
|  * The open entry point is called when a network interface is made
 | |
|  * active by the system (IFF_UP).  At this point all resources needed
 | |
|  * for transmit and receive operations are allocated, the interrupt
 | |
|  * handler is registered with the OS, the netdev watchdog subtask is
 | |
|  * enabled, and the stack is notified that the interface is ready.
 | |
|  *
 | |
|  * Returns 0 on success, negative value on failure
 | |
|  **/
 | |
| #ifdef I40E_FCOE
 | |
| int i40e_open(struct net_device *netdev)
 | |
| #else
 | |
| static int i40e_open(struct net_device *netdev)
 | |
| #endif
 | |
| {
 | |
| 	struct i40e_netdev_priv *np = netdev_priv(netdev);
 | |
| 	struct i40e_vsi *vsi = np->vsi;
 | |
| 	struct i40e_pf *pf = vsi->back;
 | |
| 	int err;
 | |
| 
 | |
| 	/* disallow open during test or if eeprom is broken */
 | |
| 	if (test_bit(__I40E_TESTING, &pf->state) ||
 | |
| 	    test_bit(__I40E_BAD_EEPROM, &pf->state))
 | |
| 		return -EBUSY;
 | |
| 
 | |
| 	netif_carrier_off(netdev);
 | |
| 
 | |
| 	err = i40e_vsi_open(vsi);
 | |
| 	if (err)
 | |
| 		return err;
 | |
| 
 | |
| 	/* configure global TSO hardware offload settings */
 | |
| 	wr32(&pf->hw, I40E_GLLAN_TSOMSK_F, be32_to_cpu(TCP_FLAG_PSH |
 | |
| 						       TCP_FLAG_FIN) >> 16);
 | |
| 	wr32(&pf->hw, I40E_GLLAN_TSOMSK_M, be32_to_cpu(TCP_FLAG_PSH |
 | |
| 						       TCP_FLAG_FIN |
 | |
| 						       TCP_FLAG_CWR) >> 16);
 | |
| 	wr32(&pf->hw, I40E_GLLAN_TSOMSK_L, be32_to_cpu(TCP_FLAG_CWR) >> 16);
 | |
| 
 | |
| #ifdef CONFIG_I40E_VXLAN
 | |
| 	vxlan_get_rx_port(netdev);
 | |
| #endif
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_vsi_open -
 | |
|  * @vsi: the VSI to open
 | |
|  *
 | |
|  * Finish initialization of the VSI.
 | |
|  *
 | |
|  * Returns 0 on success, negative value on failure
 | |
|  **/
 | |
| int i40e_vsi_open(struct i40e_vsi *vsi)
 | |
| {
 | |
| 	struct i40e_pf *pf = vsi->back;
 | |
| 	char int_name[IFNAMSIZ];
 | |
| 	int err;
 | |
| 
 | |
| 	/* allocate descriptors */
 | |
| 	err = i40e_vsi_setup_tx_resources(vsi);
 | |
| 	if (err)
 | |
| 		goto err_setup_tx;
 | |
| 	err = i40e_vsi_setup_rx_resources(vsi);
 | |
| 	if (err)
 | |
| 		goto err_setup_rx;
 | |
| 
 | |
| 	err = i40e_vsi_configure(vsi);
 | |
| 	if (err)
 | |
| 		goto err_setup_rx;
 | |
| 
 | |
| 	if (vsi->netdev) {
 | |
| 		snprintf(int_name, sizeof(int_name) - 1, "%s-%s",
 | |
| 			 dev_driver_string(&pf->pdev->dev), vsi->netdev->name);
 | |
| 		err = i40e_vsi_request_irq(vsi, int_name);
 | |
| 		if (err)
 | |
| 			goto err_setup_rx;
 | |
| 
 | |
| 		/* Notify the stack of the actual queue counts. */
 | |
| 		err = netif_set_real_num_tx_queues(vsi->netdev,
 | |
| 						   vsi->num_queue_pairs);
 | |
| 		if (err)
 | |
| 			goto err_set_queues;
 | |
| 
 | |
| 		err = netif_set_real_num_rx_queues(vsi->netdev,
 | |
| 						   vsi->num_queue_pairs);
 | |
| 		if (err)
 | |
| 			goto err_set_queues;
 | |
| 
 | |
| 	} else if (vsi->type == I40E_VSI_FDIR) {
 | |
| 		snprintf(int_name, sizeof(int_name) - 1, "%s-fdir",
 | |
| 			 dev_driver_string(&pf->pdev->dev));
 | |
| 		err = i40e_vsi_request_irq(vsi, int_name);
 | |
| 	} else {
 | |
| 		err = -EINVAL;
 | |
| 		goto err_setup_rx;
 | |
| 	}
 | |
| 
 | |
| 	err = i40e_up_complete(vsi);
 | |
| 	if (err)
 | |
| 		goto err_up_complete;
 | |
| 
 | |
| 	return 0;
 | |
| 
 | |
| err_up_complete:
 | |
| 	i40e_down(vsi);
 | |
| err_set_queues:
 | |
| 	i40e_vsi_free_irq(vsi);
 | |
| err_setup_rx:
 | |
| 	i40e_vsi_free_rx_resources(vsi);
 | |
| err_setup_tx:
 | |
| 	i40e_vsi_free_tx_resources(vsi);
 | |
| 	if (vsi == pf->vsi[pf->lan_vsi])
 | |
| 		i40e_do_reset(pf, (1 << __I40E_PF_RESET_REQUESTED));
 | |
| 
 | |
| 	return err;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_fdir_filter_exit - Cleans up the Flow Director accounting
 | |
|  * @pf: Pointer to pf
 | |
|  *
 | |
|  * This function destroys the hlist where all the Flow Director
 | |
|  * filters were saved.
 | |
|  **/
 | |
| static void i40e_fdir_filter_exit(struct i40e_pf *pf)
 | |
| {
 | |
| 	struct i40e_fdir_filter *filter;
 | |
| 	struct hlist_node *node2;
 | |
| 
 | |
| 	hlist_for_each_entry_safe(filter, node2,
 | |
| 				  &pf->fdir_filter_list, fdir_node) {
 | |
| 		hlist_del(&filter->fdir_node);
 | |
| 		kfree(filter);
 | |
| 	}
 | |
| 	pf->fdir_pf_active_filters = 0;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_close - Disables a network interface
 | |
|  * @netdev: network interface device structure
 | |
|  *
 | |
|  * The close entry point is called when an interface is de-activated
 | |
|  * by the OS.  The hardware is still under the driver's control, but
 | |
|  * this netdev interface is disabled.
 | |
|  *
 | |
|  * Returns 0, this is not allowed to fail
 | |
|  **/
 | |
| #ifdef I40E_FCOE
 | |
| int i40e_close(struct net_device *netdev)
 | |
| #else
 | |
| static int i40e_close(struct net_device *netdev)
 | |
| #endif
 | |
| {
 | |
| 	struct i40e_netdev_priv *np = netdev_priv(netdev);
 | |
| 	struct i40e_vsi *vsi = np->vsi;
 | |
| 
 | |
| 	i40e_vsi_close(vsi);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_do_reset - Start a PF or Core Reset sequence
 | |
|  * @pf: board private structure
 | |
|  * @reset_flags: which reset is requested
 | |
|  *
 | |
|  * The essential difference in resets is that the PF Reset
 | |
|  * doesn't clear the packet buffers, doesn't reset the PE
 | |
|  * firmware, and doesn't bother the other PFs on the chip.
 | |
|  **/
 | |
| void i40e_do_reset(struct i40e_pf *pf, u32 reset_flags)
 | |
| {
 | |
| 	u32 val;
 | |
| 
 | |
| 	WARN_ON(in_interrupt());
 | |
| 
 | |
| 	if (i40e_check_asq_alive(&pf->hw))
 | |
| 		i40e_vc_notify_reset(pf);
 | |
| 
 | |
| 	/* do the biggest reset indicated */
 | |
| 	if (reset_flags & (1 << __I40E_GLOBAL_RESET_REQUESTED)) {
 | |
| 
 | |
| 		/* Request a Global Reset
 | |
| 		 *
 | |
| 		 * This will start the chip's countdown to the actual full
 | |
| 		 * chip reset event, and a warning interrupt to be sent
 | |
| 		 * to all PFs, including the requestor.  Our handler
 | |
| 		 * for the warning interrupt will deal with the shutdown
 | |
| 		 * and recovery of the switch setup.
 | |
| 		 */
 | |
| 		dev_dbg(&pf->pdev->dev, "GlobalR requested\n");
 | |
| 		val = rd32(&pf->hw, I40E_GLGEN_RTRIG);
 | |
| 		val |= I40E_GLGEN_RTRIG_GLOBR_MASK;
 | |
| 		wr32(&pf->hw, I40E_GLGEN_RTRIG, val);
 | |
| 
 | |
| 	} else if (reset_flags & (1 << __I40E_CORE_RESET_REQUESTED)) {
 | |
| 
 | |
| 		/* Request a Core Reset
 | |
| 		 *
 | |
| 		 * Same as Global Reset, except does *not* include the MAC/PHY
 | |
| 		 */
 | |
| 		dev_dbg(&pf->pdev->dev, "CoreR requested\n");
 | |
| 		val = rd32(&pf->hw, I40E_GLGEN_RTRIG);
 | |
| 		val |= I40E_GLGEN_RTRIG_CORER_MASK;
 | |
| 		wr32(&pf->hw, I40E_GLGEN_RTRIG, val);
 | |
| 		i40e_flush(&pf->hw);
 | |
| 
 | |
| 	} else if (reset_flags & (1 << __I40E_EMP_RESET_REQUESTED)) {
 | |
| 
 | |
| 		/* Request a Firmware Reset
 | |
| 		 *
 | |
| 		 * Same as Global reset, plus restarting the
 | |
| 		 * embedded firmware engine.
 | |
| 		 */
 | |
| 		/* enable EMP Reset */
 | |
| 		val = rd32(&pf->hw, I40E_GLGEN_RSTENA_EMP);
 | |
| 		val |= I40E_GLGEN_RSTENA_EMP_EMP_RST_ENA_MASK;
 | |
| 		wr32(&pf->hw, I40E_GLGEN_RSTENA_EMP, val);
 | |
| 
 | |
| 		/* force the reset */
 | |
| 		val = rd32(&pf->hw, I40E_GLGEN_RTRIG);
 | |
| 		val |= I40E_GLGEN_RTRIG_EMPFWR_MASK;
 | |
| 		wr32(&pf->hw, I40E_GLGEN_RTRIG, val);
 | |
| 		i40e_flush(&pf->hw);
 | |
| 
 | |
| 	} else if (reset_flags & (1 << __I40E_PF_RESET_REQUESTED)) {
 | |
| 
 | |
| 		/* Request a PF Reset
 | |
| 		 *
 | |
| 		 * Resets only the PF-specific registers
 | |
| 		 *
 | |
| 		 * This goes directly to the tear-down and rebuild of
 | |
| 		 * the switch, since we need to do all the recovery as
 | |
| 		 * for the Core Reset.
 | |
| 		 */
 | |
| 		dev_dbg(&pf->pdev->dev, "PFR requested\n");
 | |
| 		i40e_handle_reset_warning(pf);
 | |
| 
 | |
| 	} else if (reset_flags & (1 << __I40E_REINIT_REQUESTED)) {
 | |
| 		int v;
 | |
| 
 | |
| 		/* Find the VSI(s) that requested a re-init */
 | |
| 		dev_info(&pf->pdev->dev,
 | |
| 			 "VSI reinit requested\n");
 | |
| 		for (v = 0; v < pf->num_alloc_vsi; v++) {
 | |
| 			struct i40e_vsi *vsi = pf->vsi[v];
 | |
| 			if (vsi != NULL &&
 | |
| 			    test_bit(__I40E_REINIT_REQUESTED, &vsi->state)) {
 | |
| 				i40e_vsi_reinit_locked(pf->vsi[v]);
 | |
| 				clear_bit(__I40E_REINIT_REQUESTED, &vsi->state);
 | |
| 			}
 | |
| 		}
 | |
| 
 | |
| 		/* no further action needed, so return now */
 | |
| 		return;
 | |
| 	} else if (reset_flags & (1 << __I40E_DOWN_REQUESTED)) {
 | |
| 		int v;
 | |
| 
 | |
| 		/* Find the VSI(s) that needs to be brought down */
 | |
| 		dev_info(&pf->pdev->dev, "VSI down requested\n");
 | |
| 		for (v = 0; v < pf->num_alloc_vsi; v++) {
 | |
| 			struct i40e_vsi *vsi = pf->vsi[v];
 | |
| 			if (vsi != NULL &&
 | |
| 			    test_bit(__I40E_DOWN_REQUESTED, &vsi->state)) {
 | |
| 				set_bit(__I40E_DOWN, &vsi->state);
 | |
| 				i40e_down(vsi);
 | |
| 				clear_bit(__I40E_DOWN_REQUESTED, &vsi->state);
 | |
| 			}
 | |
| 		}
 | |
| 
 | |
| 		/* no further action needed, so return now */
 | |
| 		return;
 | |
| 	} else {
 | |
| 		dev_info(&pf->pdev->dev,
 | |
| 			 "bad reset request 0x%08x\n", reset_flags);
 | |
| 		return;
 | |
| 	}
 | |
| }
 | |
| 
 | |
| #ifdef CONFIG_I40E_DCB
 | |
| /**
 | |
|  * i40e_dcb_need_reconfig - Check if DCB needs reconfig
 | |
|  * @pf: board private structure
 | |
|  * @old_cfg: current DCB config
 | |
|  * @new_cfg: new DCB config
 | |
|  **/
 | |
| bool i40e_dcb_need_reconfig(struct i40e_pf *pf,
 | |
| 			    struct i40e_dcbx_config *old_cfg,
 | |
| 			    struct i40e_dcbx_config *new_cfg)
 | |
| {
 | |
| 	bool need_reconfig = false;
 | |
| 
 | |
| 	/* Check if ETS configuration has changed */
 | |
| 	if (memcmp(&new_cfg->etscfg,
 | |
| 		   &old_cfg->etscfg,
 | |
| 		   sizeof(new_cfg->etscfg))) {
 | |
| 		/* If Priority Table has changed reconfig is needed */
 | |
| 		if (memcmp(&new_cfg->etscfg.prioritytable,
 | |
| 			   &old_cfg->etscfg.prioritytable,
 | |
| 			   sizeof(new_cfg->etscfg.prioritytable))) {
 | |
| 			need_reconfig = true;
 | |
| 			dev_dbg(&pf->pdev->dev, "ETS UP2TC changed.\n");
 | |
| 		}
 | |
| 
 | |
| 		if (memcmp(&new_cfg->etscfg.tcbwtable,
 | |
| 			   &old_cfg->etscfg.tcbwtable,
 | |
| 			   sizeof(new_cfg->etscfg.tcbwtable)))
 | |
| 			dev_dbg(&pf->pdev->dev, "ETS TC BW Table changed.\n");
 | |
| 
 | |
| 		if (memcmp(&new_cfg->etscfg.tsatable,
 | |
| 			   &old_cfg->etscfg.tsatable,
 | |
| 			   sizeof(new_cfg->etscfg.tsatable)))
 | |
| 			dev_dbg(&pf->pdev->dev, "ETS TSA Table changed.\n");
 | |
| 	}
 | |
| 
 | |
| 	/* Check if PFC configuration has changed */
 | |
| 	if (memcmp(&new_cfg->pfc,
 | |
| 		   &old_cfg->pfc,
 | |
| 		   sizeof(new_cfg->pfc))) {
 | |
| 		need_reconfig = true;
 | |
| 		dev_dbg(&pf->pdev->dev, "PFC config change detected.\n");
 | |
| 	}
 | |
| 
 | |
| 	/* Check if APP Table has changed */
 | |
| 	if (memcmp(&new_cfg->app,
 | |
| 		   &old_cfg->app,
 | |
| 		   sizeof(new_cfg->app))) {
 | |
| 		need_reconfig = true;
 | |
| 		dev_dbg(&pf->pdev->dev, "APP Table change detected.\n");
 | |
| 	}
 | |
| 
 | |
| 	return need_reconfig;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_handle_lldp_event - Handle LLDP Change MIB event
 | |
|  * @pf: board private structure
 | |
|  * @e: event info posted on ARQ
 | |
|  **/
 | |
| static int i40e_handle_lldp_event(struct i40e_pf *pf,
 | |
| 				  struct i40e_arq_event_info *e)
 | |
| {
 | |
| 	struct i40e_aqc_lldp_get_mib *mib =
 | |
| 		(struct i40e_aqc_lldp_get_mib *)&e->desc.params.raw;
 | |
| 	struct i40e_hw *hw = &pf->hw;
 | |
| 	struct i40e_dcbx_config *dcbx_cfg = &hw->local_dcbx_config;
 | |
| 	struct i40e_dcbx_config tmp_dcbx_cfg;
 | |
| 	bool need_reconfig = false;
 | |
| 	int ret = 0;
 | |
| 	u8 type;
 | |
| 
 | |
| 	/* Not DCB capable or capability disabled */
 | |
| 	if (!(pf->flags & I40E_FLAG_DCB_CAPABLE))
 | |
| 		return ret;
 | |
| 
 | |
| 	/* Ignore if event is not for Nearest Bridge */
 | |
| 	type = ((mib->type >> I40E_AQ_LLDP_BRIDGE_TYPE_SHIFT)
 | |
| 		& I40E_AQ_LLDP_BRIDGE_TYPE_MASK);
 | |
| 	if (type != I40E_AQ_LLDP_BRIDGE_TYPE_NEAREST_BRIDGE)
 | |
| 		return ret;
 | |
| 
 | |
| 	/* Check MIB Type and return if event for Remote MIB update */
 | |
| 	type = mib->type & I40E_AQ_LLDP_MIB_TYPE_MASK;
 | |
| 	if (type == I40E_AQ_LLDP_MIB_REMOTE) {
 | |
| 		/* Update the remote cached instance and return */
 | |
| 		ret = i40e_aq_get_dcb_config(hw, I40E_AQ_LLDP_MIB_REMOTE,
 | |
| 				I40E_AQ_LLDP_BRIDGE_TYPE_NEAREST_BRIDGE,
 | |
| 				&hw->remote_dcbx_config);
 | |
| 		goto exit;
 | |
| 	}
 | |
| 
 | |
| 	/* Convert/store the DCBX data from LLDPDU temporarily */
 | |
| 	memset(&tmp_dcbx_cfg, 0, sizeof(tmp_dcbx_cfg));
 | |
| 	ret = i40e_lldp_to_dcb_config(e->msg_buf, &tmp_dcbx_cfg);
 | |
| 	if (ret) {
 | |
| 		/* Error in LLDPDU parsing return */
 | |
| 		dev_info(&pf->pdev->dev, "Failed parsing LLDPDU from event buffer\n");
 | |
| 		goto exit;
 | |
| 	}
 | |
| 
 | |
| 	/* No change detected in DCBX configs */
 | |
| 	if (!memcmp(&tmp_dcbx_cfg, dcbx_cfg, sizeof(tmp_dcbx_cfg))) {
 | |
| 		dev_dbg(&pf->pdev->dev, "No change detected in DCBX configuration.\n");
 | |
| 		goto exit;
 | |
| 	}
 | |
| 
 | |
| 	need_reconfig = i40e_dcb_need_reconfig(pf, dcbx_cfg, &tmp_dcbx_cfg);
 | |
| 
 | |
| 	i40e_dcbnl_flush_apps(pf, &tmp_dcbx_cfg);
 | |
| 
 | |
| 	/* Overwrite the new configuration */
 | |
| 	*dcbx_cfg = tmp_dcbx_cfg;
 | |
| 
 | |
| 	if (!need_reconfig)
 | |
| 		goto exit;
 | |
| 
 | |
| 	/* Enable DCB tagging only when more than one TC */
 | |
| 	if (i40e_dcb_get_num_tc(dcbx_cfg) > 1)
 | |
| 		pf->flags |= I40E_FLAG_DCB_ENABLED;
 | |
| 	else
 | |
| 		pf->flags &= ~I40E_FLAG_DCB_ENABLED;
 | |
| 
 | |
| 	/* Reconfiguration needed quiesce all VSIs */
 | |
| 	i40e_pf_quiesce_all_vsi(pf);
 | |
| 
 | |
| 	/* Changes in configuration update VEB/VSI */
 | |
| 	i40e_dcb_reconfigure(pf);
 | |
| 
 | |
| 	i40e_pf_unquiesce_all_vsi(pf);
 | |
| exit:
 | |
| 	return ret;
 | |
| }
 | |
| #endif /* CONFIG_I40E_DCB */
 | |
| 
 | |
| /**
 | |
|  * i40e_do_reset_safe - Protected reset path for userland calls.
 | |
|  * @pf: board private structure
 | |
|  * @reset_flags: which reset is requested
 | |
|  *
 | |
|  **/
 | |
| void i40e_do_reset_safe(struct i40e_pf *pf, u32 reset_flags)
 | |
| {
 | |
| 	rtnl_lock();
 | |
| 	i40e_do_reset(pf, reset_flags);
 | |
| 	rtnl_unlock();
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_handle_lan_overflow_event - Handler for LAN queue overflow event
 | |
|  * @pf: board private structure
 | |
|  * @e: event info posted on ARQ
 | |
|  *
 | |
|  * Handler for LAN Queue Overflow Event generated by the firmware for PF
 | |
|  * and VF queues
 | |
|  **/
 | |
| static void i40e_handle_lan_overflow_event(struct i40e_pf *pf,
 | |
| 					   struct i40e_arq_event_info *e)
 | |
| {
 | |
| 	struct i40e_aqc_lan_overflow *data =
 | |
| 		(struct i40e_aqc_lan_overflow *)&e->desc.params.raw;
 | |
| 	u32 queue = le32_to_cpu(data->prtdcb_rupto);
 | |
| 	u32 qtx_ctl = le32_to_cpu(data->otx_ctl);
 | |
| 	struct i40e_hw *hw = &pf->hw;
 | |
| 	struct i40e_vf *vf;
 | |
| 	u16 vf_id;
 | |
| 
 | |
| 	dev_dbg(&pf->pdev->dev, "overflow Rx Queue Number = %d QTX_CTL=0x%08x\n",
 | |
| 		queue, qtx_ctl);
 | |
| 
 | |
| 	/* Queue belongs to VF, find the VF and issue VF reset */
 | |
| 	if (((qtx_ctl & I40E_QTX_CTL_PFVF_Q_MASK)
 | |
| 	    >> I40E_QTX_CTL_PFVF_Q_SHIFT) == I40E_QTX_CTL_VF_QUEUE) {
 | |
| 		vf_id = (u16)((qtx_ctl & I40E_QTX_CTL_VFVM_INDX_MASK)
 | |
| 			 >> I40E_QTX_CTL_VFVM_INDX_SHIFT);
 | |
| 		vf_id -= hw->func_caps.vf_base_id;
 | |
| 		vf = &pf->vf[vf_id];
 | |
| 		i40e_vc_notify_vf_reset(vf);
 | |
| 		/* Allow VF to process pending reset notification */
 | |
| 		msleep(20);
 | |
| 		i40e_reset_vf(vf, false);
 | |
| 	}
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_service_event_complete - Finish up the service event
 | |
|  * @pf: board private structure
 | |
|  **/
 | |
| static void i40e_service_event_complete(struct i40e_pf *pf)
 | |
| {
 | |
| 	BUG_ON(!test_bit(__I40E_SERVICE_SCHED, &pf->state));
 | |
| 
 | |
| 	/* flush memory to make sure state is correct before next watchog */
 | |
| 	smp_mb__before_atomic();
 | |
| 	clear_bit(__I40E_SERVICE_SCHED, &pf->state);
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_get_cur_guaranteed_fd_count - Get the consumed guaranteed FD filters
 | |
|  * @pf: board private structure
 | |
|  **/
 | |
| int i40e_get_cur_guaranteed_fd_count(struct i40e_pf *pf)
 | |
| {
 | |
| 	int val, fcnt_prog;
 | |
| 
 | |
| 	val = rd32(&pf->hw, I40E_PFQF_FDSTAT);
 | |
| 	fcnt_prog = (val & I40E_PFQF_FDSTAT_GUARANT_CNT_MASK);
 | |
| 	return fcnt_prog;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_get_current_fd_count - Get the count of total FD filters programmed
 | |
|  * @pf: board private structure
 | |
|  **/
 | |
| int i40e_get_current_fd_count(struct i40e_pf *pf)
 | |
| {
 | |
| 	int val, fcnt_prog;
 | |
| 	val = rd32(&pf->hw, I40E_PFQF_FDSTAT);
 | |
| 	fcnt_prog = (val & I40E_PFQF_FDSTAT_GUARANT_CNT_MASK) +
 | |
| 		    ((val & I40E_PFQF_FDSTAT_BEST_CNT_MASK) >>
 | |
| 		      I40E_PFQF_FDSTAT_BEST_CNT_SHIFT);
 | |
| 	return fcnt_prog;
 | |
| }
 | |
| /**
 | |
|  * i40e_fdir_check_and_reenable - Function to reenabe FD ATR or SB if disabled
 | |
|  * @pf: board private structure
 | |
|  **/
 | |
| void i40e_fdir_check_and_reenable(struct i40e_pf *pf)
 | |
| {
 | |
| 	u32 fcnt_prog, fcnt_avail;
 | |
| 
 | |
| 	/* Check if, FD SB or ATR was auto disabled and if there is enough room
 | |
| 	 * to re-enable
 | |
| 	 */
 | |
| 	if ((pf->flags & I40E_FLAG_FD_ATR_ENABLED) &&
 | |
| 	    (pf->flags & I40E_FLAG_FD_SB_ENABLED))
 | |
| 		return;
 | |
| 	fcnt_prog = i40e_get_cur_guaranteed_fd_count(pf);
 | |
| 	fcnt_avail = pf->fdir_pf_filter_count;
 | |
| 	if (fcnt_prog < (fcnt_avail - I40E_FDIR_BUFFER_HEAD_ROOM)) {
 | |
| 		if ((pf->flags & I40E_FLAG_FD_SB_ENABLED) &&
 | |
| 		    (pf->auto_disable_flags & I40E_FLAG_FD_SB_ENABLED)) {
 | |
| 			pf->auto_disable_flags &= ~I40E_FLAG_FD_SB_ENABLED;
 | |
| 			dev_info(&pf->pdev->dev, "FD Sideband/ntuple is being enabled since we have space in the table now\n");
 | |
| 		}
 | |
| 	}
 | |
| 	/* Wait for some more space to be available to turn on ATR */
 | |
| 	if (fcnt_prog < (fcnt_avail - I40E_FDIR_BUFFER_HEAD_ROOM * 2)) {
 | |
| 		if ((pf->flags & I40E_FLAG_FD_ATR_ENABLED) &&
 | |
| 		    (pf->auto_disable_flags & I40E_FLAG_FD_ATR_ENABLED)) {
 | |
| 			pf->auto_disable_flags &= ~I40E_FLAG_FD_ATR_ENABLED;
 | |
| 			dev_info(&pf->pdev->dev, "ATR is being enabled since we have space in the table now\n");
 | |
| 		}
 | |
| 	}
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_fdir_reinit_subtask - Worker thread to reinit FDIR filter table
 | |
|  * @pf: board private structure
 | |
|  **/
 | |
| static void i40e_fdir_reinit_subtask(struct i40e_pf *pf)
 | |
| {
 | |
| 	if (!(pf->flags & I40E_FLAG_FDIR_REQUIRES_REINIT))
 | |
| 		return;
 | |
| 
 | |
| 	/* if interface is down do nothing */
 | |
| 	if (test_bit(__I40E_DOWN, &pf->state))
 | |
| 		return;
 | |
| 	i40e_fdir_check_and_reenable(pf);
 | |
| 
 | |
| 	if ((pf->flags & I40E_FLAG_FD_ATR_ENABLED) &&
 | |
| 	    (pf->flags & I40E_FLAG_FD_SB_ENABLED))
 | |
| 		pf->flags &= ~I40E_FLAG_FDIR_REQUIRES_REINIT;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_vsi_link_event - notify VSI of a link event
 | |
|  * @vsi: vsi to be notified
 | |
|  * @link_up: link up or down
 | |
|  **/
 | |
| static void i40e_vsi_link_event(struct i40e_vsi *vsi, bool link_up)
 | |
| {
 | |
| 	if (!vsi)
 | |
| 		return;
 | |
| 
 | |
| 	switch (vsi->type) {
 | |
| 	case I40E_VSI_MAIN:
 | |
| #ifdef I40E_FCOE
 | |
| 	case I40E_VSI_FCOE:
 | |
| #endif
 | |
| 		if (!vsi->netdev || !vsi->netdev_registered)
 | |
| 			break;
 | |
| 
 | |
| 		if (link_up) {
 | |
| 			netif_carrier_on(vsi->netdev);
 | |
| 			netif_tx_wake_all_queues(vsi->netdev);
 | |
| 		} else {
 | |
| 			netif_carrier_off(vsi->netdev);
 | |
| 			netif_tx_stop_all_queues(vsi->netdev);
 | |
| 		}
 | |
| 		break;
 | |
| 
 | |
| 	case I40E_VSI_SRIOV:
 | |
| 		break;
 | |
| 
 | |
| 	case I40E_VSI_VMDQ2:
 | |
| 	case I40E_VSI_CTRL:
 | |
| 	case I40E_VSI_MIRROR:
 | |
| 	default:
 | |
| 		/* there is no notification for other VSIs */
 | |
| 		break;
 | |
| 	}
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_veb_link_event - notify elements on the veb of a link event
 | |
|  * @veb: veb to be notified
 | |
|  * @link_up: link up or down
 | |
|  **/
 | |
| static void i40e_veb_link_event(struct i40e_veb *veb, bool link_up)
 | |
| {
 | |
| 	struct i40e_pf *pf;
 | |
| 	int i;
 | |
| 
 | |
| 	if (!veb || !veb->pf)
 | |
| 		return;
 | |
| 	pf = veb->pf;
 | |
| 
 | |
| 	/* depth first... */
 | |
| 	for (i = 0; i < I40E_MAX_VEB; i++)
 | |
| 		if (pf->veb[i] && (pf->veb[i]->uplink_seid == veb->seid))
 | |
| 			i40e_veb_link_event(pf->veb[i], link_up);
 | |
| 
 | |
| 	/* ... now the local VSIs */
 | |
| 	for (i = 0; i < pf->num_alloc_vsi; i++)
 | |
| 		if (pf->vsi[i] && (pf->vsi[i]->uplink_seid == veb->seid))
 | |
| 			i40e_vsi_link_event(pf->vsi[i], link_up);
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_link_event - Update netif_carrier status
 | |
|  * @pf: board private structure
 | |
|  **/
 | |
| static void i40e_link_event(struct i40e_pf *pf)
 | |
| {
 | |
| 	bool new_link, old_link;
 | |
| 
 | |
| 	new_link = (pf->hw.phy.link_info.link_info & I40E_AQ_LINK_UP);
 | |
| 	old_link = (pf->hw.phy.link_info_old.link_info & I40E_AQ_LINK_UP);
 | |
| 
 | |
| 	if (new_link == old_link)
 | |
| 		return;
 | |
| 	if (!test_bit(__I40E_DOWN, &pf->vsi[pf->lan_vsi]->state))
 | |
| 		i40e_print_link_message(pf->vsi[pf->lan_vsi], new_link);
 | |
| 
 | |
| 	/* Notify the base of the switch tree connected to
 | |
| 	 * the link.  Floating VEBs are not notified.
 | |
| 	 */
 | |
| 	if (pf->lan_veb != I40E_NO_VEB && pf->veb[pf->lan_veb])
 | |
| 		i40e_veb_link_event(pf->veb[pf->lan_veb], new_link);
 | |
| 	else
 | |
| 		i40e_vsi_link_event(pf->vsi[pf->lan_vsi], new_link);
 | |
| 
 | |
| 	if (pf->vf)
 | |
| 		i40e_vc_notify_link_state(pf);
 | |
| 
 | |
| 	if (pf->flags & I40E_FLAG_PTP)
 | |
| 		i40e_ptp_set_increment(pf);
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_check_hang_subtask - Check for hung queues and dropped interrupts
 | |
|  * @pf: board private structure
 | |
|  *
 | |
|  * Set the per-queue flags to request a check for stuck queues in the irq
 | |
|  * clean functions, then force interrupts to be sure the irq clean is called.
 | |
|  **/
 | |
| static void i40e_check_hang_subtask(struct i40e_pf *pf)
 | |
| {
 | |
| 	int i, v;
 | |
| 
 | |
| 	/* If we're down or resetting, just bail */
 | |
| 	if (test_bit(__I40E_CONFIG_BUSY, &pf->state))
 | |
| 		return;
 | |
| 
 | |
| 	/* for each VSI/netdev
 | |
| 	 *     for each Tx queue
 | |
| 	 *         set the check flag
 | |
| 	 *     for each q_vector
 | |
| 	 *         force an interrupt
 | |
| 	 */
 | |
| 	for (v = 0; v < pf->num_alloc_vsi; v++) {
 | |
| 		struct i40e_vsi *vsi = pf->vsi[v];
 | |
| 		int armed = 0;
 | |
| 
 | |
| 		if (!pf->vsi[v] ||
 | |
| 		    test_bit(__I40E_DOWN, &vsi->state) ||
 | |
| 		    (vsi->netdev && !netif_carrier_ok(vsi->netdev)))
 | |
| 			continue;
 | |
| 
 | |
| 		for (i = 0; i < vsi->num_queue_pairs; i++) {
 | |
| 			set_check_for_tx_hang(vsi->tx_rings[i]);
 | |
| 			if (test_bit(__I40E_HANG_CHECK_ARMED,
 | |
| 				     &vsi->tx_rings[i]->state))
 | |
| 				armed++;
 | |
| 		}
 | |
| 
 | |
| 		if (armed) {
 | |
| 			if (!(pf->flags & I40E_FLAG_MSIX_ENABLED)) {
 | |
| 				wr32(&vsi->back->hw, I40E_PFINT_DYN_CTL0,
 | |
| 				     (I40E_PFINT_DYN_CTL0_INTENA_MASK |
 | |
| 				      I40E_PFINT_DYN_CTL0_SWINT_TRIG_MASK));
 | |
| 			} else {
 | |
| 				u16 vec = vsi->base_vector - 1;
 | |
| 				u32 val = (I40E_PFINT_DYN_CTLN_INTENA_MASK |
 | |
| 					   I40E_PFINT_DYN_CTLN_SWINT_TRIG_MASK);
 | |
| 				for (i = 0; i < vsi->num_q_vectors; i++, vec++)
 | |
| 					wr32(&vsi->back->hw,
 | |
| 					     I40E_PFINT_DYN_CTLN(vec), val);
 | |
| 			}
 | |
| 			i40e_flush(&vsi->back->hw);
 | |
| 		}
 | |
| 	}
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_watchdog_subtask - Check and bring link up
 | |
|  * @pf: board private structure
 | |
|  **/
 | |
| static void i40e_watchdog_subtask(struct i40e_pf *pf)
 | |
| {
 | |
| 	int i;
 | |
| 
 | |
| 	/* if interface is down do nothing */
 | |
| 	if (test_bit(__I40E_DOWN, &pf->state) ||
 | |
| 	    test_bit(__I40E_CONFIG_BUSY, &pf->state))
 | |
| 		return;
 | |
| 
 | |
| 	/* Update the stats for active netdevs so the network stack
 | |
| 	 * can look at updated numbers whenever it cares to
 | |
| 	 */
 | |
| 	for (i = 0; i < pf->num_alloc_vsi; i++)
 | |
| 		if (pf->vsi[i] && pf->vsi[i]->netdev)
 | |
| 			i40e_update_stats(pf->vsi[i]);
 | |
| 
 | |
| 	/* Update the stats for the active switching components */
 | |
| 	for (i = 0; i < I40E_MAX_VEB; i++)
 | |
| 		if (pf->veb[i])
 | |
| 			i40e_update_veb_stats(pf->veb[i]);
 | |
| 
 | |
| 	i40e_ptp_rx_hang(pf->vsi[pf->lan_vsi]);
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_reset_subtask - Set up for resetting the device and driver
 | |
|  * @pf: board private structure
 | |
|  **/
 | |
| static void i40e_reset_subtask(struct i40e_pf *pf)
 | |
| {
 | |
| 	u32 reset_flags = 0;
 | |
| 
 | |
| 	rtnl_lock();
 | |
| 	if (test_bit(__I40E_REINIT_REQUESTED, &pf->state)) {
 | |
| 		reset_flags |= (1 << __I40E_REINIT_REQUESTED);
 | |
| 		clear_bit(__I40E_REINIT_REQUESTED, &pf->state);
 | |
| 	}
 | |
| 	if (test_bit(__I40E_PF_RESET_REQUESTED, &pf->state)) {
 | |
| 		reset_flags |= (1 << __I40E_PF_RESET_REQUESTED);
 | |
| 		clear_bit(__I40E_PF_RESET_REQUESTED, &pf->state);
 | |
| 	}
 | |
| 	if (test_bit(__I40E_CORE_RESET_REQUESTED, &pf->state)) {
 | |
| 		reset_flags |= (1 << __I40E_CORE_RESET_REQUESTED);
 | |
| 		clear_bit(__I40E_CORE_RESET_REQUESTED, &pf->state);
 | |
| 	}
 | |
| 	if (test_bit(__I40E_GLOBAL_RESET_REQUESTED, &pf->state)) {
 | |
| 		reset_flags |= (1 << __I40E_GLOBAL_RESET_REQUESTED);
 | |
| 		clear_bit(__I40E_GLOBAL_RESET_REQUESTED, &pf->state);
 | |
| 	}
 | |
| 	if (test_bit(__I40E_DOWN_REQUESTED, &pf->state)) {
 | |
| 		reset_flags |= (1 << __I40E_DOWN_REQUESTED);
 | |
| 		clear_bit(__I40E_DOWN_REQUESTED, &pf->state);
 | |
| 	}
 | |
| 
 | |
| 	/* If there's a recovery already waiting, it takes
 | |
| 	 * precedence before starting a new reset sequence.
 | |
| 	 */
 | |
| 	if (test_bit(__I40E_RESET_INTR_RECEIVED, &pf->state)) {
 | |
| 		i40e_handle_reset_warning(pf);
 | |
| 		goto unlock;
 | |
| 	}
 | |
| 
 | |
| 	/* If we're already down or resetting, just bail */
 | |
| 	if (reset_flags &&
 | |
| 	    !test_bit(__I40E_DOWN, &pf->state) &&
 | |
| 	    !test_bit(__I40E_CONFIG_BUSY, &pf->state))
 | |
| 		i40e_do_reset(pf, reset_flags);
 | |
| 
 | |
| unlock:
 | |
| 	rtnl_unlock();
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_handle_link_event - Handle link event
 | |
|  * @pf: board private structure
 | |
|  * @e: event info posted on ARQ
 | |
|  **/
 | |
| static void i40e_handle_link_event(struct i40e_pf *pf,
 | |
| 				   struct i40e_arq_event_info *e)
 | |
| {
 | |
| 	struct i40e_hw *hw = &pf->hw;
 | |
| 	struct i40e_aqc_get_link_status *status =
 | |
| 		(struct i40e_aqc_get_link_status *)&e->desc.params.raw;
 | |
| 	struct i40e_link_status *hw_link_info = &hw->phy.link_info;
 | |
| 
 | |
| 	/* save off old link status information */
 | |
| 	memcpy(&pf->hw.phy.link_info_old, hw_link_info,
 | |
| 	       sizeof(pf->hw.phy.link_info_old));
 | |
| 
 | |
| 	/* update link status */
 | |
| 	hw_link_info->phy_type = (enum i40e_aq_phy_type)status->phy_type;
 | |
| 	hw_link_info->link_speed = (enum i40e_aq_link_speed)status->link_speed;
 | |
| 	hw_link_info->link_info = status->link_info;
 | |
| 	hw_link_info->an_info = status->an_info;
 | |
| 	hw_link_info->ext_info = status->ext_info;
 | |
| 	hw_link_info->lse_enable =
 | |
| 		le16_to_cpu(status->command_flags) &
 | |
| 			    I40E_AQ_LSE_ENABLE;
 | |
| 
 | |
| 	/* process the event */
 | |
| 	i40e_link_event(pf);
 | |
| 
 | |
| 	/* Do a new status request to re-enable LSE reporting
 | |
| 	 * and load new status information into the hw struct,
 | |
| 	 * then see if the status changed while processing the
 | |
| 	 * initial event.
 | |
| 	 */
 | |
| 	i40e_update_link_info(&pf->hw, true);
 | |
| 	i40e_link_event(pf);
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_clean_adminq_subtask - Clean the AdminQ rings
 | |
|  * @pf: board private structure
 | |
|  **/
 | |
| static void i40e_clean_adminq_subtask(struct i40e_pf *pf)
 | |
| {
 | |
| 	struct i40e_arq_event_info event;
 | |
| 	struct i40e_hw *hw = &pf->hw;
 | |
| 	u16 pending, i = 0;
 | |
| 	i40e_status ret;
 | |
| 	u16 opcode;
 | |
| 	u32 oldval;
 | |
| 	u32 val;
 | |
| 
 | |
| 	/* check for error indications */
 | |
| 	val = rd32(&pf->hw, pf->hw.aq.arq.len);
 | |
| 	oldval = val;
 | |
| 	if (val & I40E_PF_ARQLEN_ARQVFE_MASK) {
 | |
| 		dev_info(&pf->pdev->dev, "ARQ VF Error detected\n");
 | |
| 		val &= ~I40E_PF_ARQLEN_ARQVFE_MASK;
 | |
| 	}
 | |
| 	if (val & I40E_PF_ARQLEN_ARQOVFL_MASK) {
 | |
| 		dev_info(&pf->pdev->dev, "ARQ Overflow Error detected\n");
 | |
| 		val &= ~I40E_PF_ARQLEN_ARQOVFL_MASK;
 | |
| 	}
 | |
| 	if (val & I40E_PF_ARQLEN_ARQCRIT_MASK) {
 | |
| 		dev_info(&pf->pdev->dev, "ARQ Critical Error detected\n");
 | |
| 		val &= ~I40E_PF_ARQLEN_ARQCRIT_MASK;
 | |
| 	}
 | |
| 	if (oldval != val)
 | |
| 		wr32(&pf->hw, pf->hw.aq.arq.len, val);
 | |
| 
 | |
| 	val = rd32(&pf->hw, pf->hw.aq.asq.len);
 | |
| 	oldval = val;
 | |
| 	if (val & I40E_PF_ATQLEN_ATQVFE_MASK) {
 | |
| 		dev_info(&pf->pdev->dev, "ASQ VF Error detected\n");
 | |
| 		val &= ~I40E_PF_ATQLEN_ATQVFE_MASK;
 | |
| 	}
 | |
| 	if (val & I40E_PF_ATQLEN_ATQOVFL_MASK) {
 | |
| 		dev_info(&pf->pdev->dev, "ASQ Overflow Error detected\n");
 | |
| 		val &= ~I40E_PF_ATQLEN_ATQOVFL_MASK;
 | |
| 	}
 | |
| 	if (val & I40E_PF_ATQLEN_ATQCRIT_MASK) {
 | |
| 		dev_info(&pf->pdev->dev, "ASQ Critical Error detected\n");
 | |
| 		val &= ~I40E_PF_ATQLEN_ATQCRIT_MASK;
 | |
| 	}
 | |
| 	if (oldval != val)
 | |
| 		wr32(&pf->hw, pf->hw.aq.asq.len, val);
 | |
| 
 | |
| 	event.msg_size = I40E_MAX_AQ_BUF_SIZE;
 | |
| 	event.msg_buf = kzalloc(event.msg_size, GFP_KERNEL);
 | |
| 	if (!event.msg_buf)
 | |
| 		return;
 | |
| 
 | |
| 	do {
 | |
| 		event.msg_size = I40E_MAX_AQ_BUF_SIZE; /* reinit each time */
 | |
| 		ret = i40e_clean_arq_element(hw, &event, &pending);
 | |
| 		if (ret == I40E_ERR_ADMIN_QUEUE_NO_WORK)
 | |
| 			break;
 | |
| 		else if (ret) {
 | |
| 			dev_info(&pf->pdev->dev, "ARQ event error %d\n", ret);
 | |
| 			break;
 | |
| 		}
 | |
| 
 | |
| 		opcode = le16_to_cpu(event.desc.opcode);
 | |
| 		switch (opcode) {
 | |
| 
 | |
| 		case i40e_aqc_opc_get_link_status:
 | |
| 			i40e_handle_link_event(pf, &event);
 | |
| 			break;
 | |
| 		case i40e_aqc_opc_send_msg_to_pf:
 | |
| 			ret = i40e_vc_process_vf_msg(pf,
 | |
| 					le16_to_cpu(event.desc.retval),
 | |
| 					le32_to_cpu(event.desc.cookie_high),
 | |
| 					le32_to_cpu(event.desc.cookie_low),
 | |
| 					event.msg_buf,
 | |
| 					event.msg_size);
 | |
| 			break;
 | |
| 		case i40e_aqc_opc_lldp_update_mib:
 | |
| 			dev_dbg(&pf->pdev->dev, "ARQ: Update LLDP MIB event received\n");
 | |
| #ifdef CONFIG_I40E_DCB
 | |
| 			rtnl_lock();
 | |
| 			ret = i40e_handle_lldp_event(pf, &event);
 | |
| 			rtnl_unlock();
 | |
| #endif /* CONFIG_I40E_DCB */
 | |
| 			break;
 | |
| 		case i40e_aqc_opc_event_lan_overflow:
 | |
| 			dev_dbg(&pf->pdev->dev, "ARQ LAN queue overflow event received\n");
 | |
| 			i40e_handle_lan_overflow_event(pf, &event);
 | |
| 			break;
 | |
| 		case i40e_aqc_opc_send_msg_to_peer:
 | |
| 			dev_info(&pf->pdev->dev, "ARQ: Msg from other pf\n");
 | |
| 			break;
 | |
| 		default:
 | |
| 			dev_info(&pf->pdev->dev,
 | |
| 				 "ARQ Error: Unknown event 0x%04x received\n",
 | |
| 				 opcode);
 | |
| 			break;
 | |
| 		}
 | |
| 	} while (pending && (i++ < pf->adminq_work_limit));
 | |
| 
 | |
| 	clear_bit(__I40E_ADMINQ_EVENT_PENDING, &pf->state);
 | |
| 	/* re-enable Admin queue interrupt cause */
 | |
| 	val = rd32(hw, I40E_PFINT_ICR0_ENA);
 | |
| 	val |=  I40E_PFINT_ICR0_ENA_ADMINQ_MASK;
 | |
| 	wr32(hw, I40E_PFINT_ICR0_ENA, val);
 | |
| 	i40e_flush(hw);
 | |
| 
 | |
| 	kfree(event.msg_buf);
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_verify_eeprom - make sure eeprom is good to use
 | |
|  * @pf: board private structure
 | |
|  **/
 | |
| static void i40e_verify_eeprom(struct i40e_pf *pf)
 | |
| {
 | |
| 	int err;
 | |
| 
 | |
| 	err = i40e_diag_eeprom_test(&pf->hw);
 | |
| 	if (err) {
 | |
| 		/* retry in case of garbage read */
 | |
| 		err = i40e_diag_eeprom_test(&pf->hw);
 | |
| 		if (err) {
 | |
| 			dev_info(&pf->pdev->dev, "eeprom check failed (%d), Tx/Rx traffic disabled\n",
 | |
| 				 err);
 | |
| 			set_bit(__I40E_BAD_EEPROM, &pf->state);
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	if (!err && test_bit(__I40E_BAD_EEPROM, &pf->state)) {
 | |
| 		dev_info(&pf->pdev->dev, "eeprom check passed, Tx/Rx traffic enabled\n");
 | |
| 		clear_bit(__I40E_BAD_EEPROM, &pf->state);
 | |
| 	}
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_reconstitute_veb - rebuild the VEB and anything connected to it
 | |
|  * @veb: pointer to the VEB instance
 | |
|  *
 | |
|  * This is a recursive function that first builds the attached VSIs then
 | |
|  * recurses in to build the next layer of VEB.  We track the connections
 | |
|  * through our own index numbers because the seid's from the HW could
 | |
|  * change across the reset.
 | |
|  **/
 | |
| static int i40e_reconstitute_veb(struct i40e_veb *veb)
 | |
| {
 | |
| 	struct i40e_vsi *ctl_vsi = NULL;
 | |
| 	struct i40e_pf *pf = veb->pf;
 | |
| 	int v, veb_idx;
 | |
| 	int ret;
 | |
| 
 | |
| 	/* build VSI that owns this VEB, temporarily attached to base VEB */
 | |
| 	for (v = 0; v < pf->num_alloc_vsi && !ctl_vsi; v++) {
 | |
| 		if (pf->vsi[v] &&
 | |
| 		    pf->vsi[v]->veb_idx == veb->idx &&
 | |
| 		    pf->vsi[v]->flags & I40E_VSI_FLAG_VEB_OWNER) {
 | |
| 			ctl_vsi = pf->vsi[v];
 | |
| 			break;
 | |
| 		}
 | |
| 	}
 | |
| 	if (!ctl_vsi) {
 | |
| 		dev_info(&pf->pdev->dev,
 | |
| 			 "missing owner VSI for veb_idx %d\n", veb->idx);
 | |
| 		ret = -ENOENT;
 | |
| 		goto end_reconstitute;
 | |
| 	}
 | |
| 	if (ctl_vsi != pf->vsi[pf->lan_vsi])
 | |
| 		ctl_vsi->uplink_seid = pf->vsi[pf->lan_vsi]->uplink_seid;
 | |
| 	ret = i40e_add_vsi(ctl_vsi);
 | |
| 	if (ret) {
 | |
| 		dev_info(&pf->pdev->dev,
 | |
| 			 "rebuild of owner VSI failed: %d\n", ret);
 | |
| 		goto end_reconstitute;
 | |
| 	}
 | |
| 	i40e_vsi_reset_stats(ctl_vsi);
 | |
| 
 | |
| 	/* create the VEB in the switch and move the VSI onto the VEB */
 | |
| 	ret = i40e_add_veb(veb, ctl_vsi);
 | |
| 	if (ret)
 | |
| 		goto end_reconstitute;
 | |
| 
 | |
| 	/* create the remaining VSIs attached to this VEB */
 | |
| 	for (v = 0; v < pf->num_alloc_vsi; v++) {
 | |
| 		if (!pf->vsi[v] || pf->vsi[v] == ctl_vsi)
 | |
| 			continue;
 | |
| 
 | |
| 		if (pf->vsi[v]->veb_idx == veb->idx) {
 | |
| 			struct i40e_vsi *vsi = pf->vsi[v];
 | |
| 			vsi->uplink_seid = veb->seid;
 | |
| 			ret = i40e_add_vsi(vsi);
 | |
| 			if (ret) {
 | |
| 				dev_info(&pf->pdev->dev,
 | |
| 					 "rebuild of vsi_idx %d failed: %d\n",
 | |
| 					 v, ret);
 | |
| 				goto end_reconstitute;
 | |
| 			}
 | |
| 			i40e_vsi_reset_stats(vsi);
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	/* create any VEBs attached to this VEB - RECURSION */
 | |
| 	for (veb_idx = 0; veb_idx < I40E_MAX_VEB; veb_idx++) {
 | |
| 		if (pf->veb[veb_idx] && pf->veb[veb_idx]->veb_idx == veb->idx) {
 | |
| 			pf->veb[veb_idx]->uplink_seid = veb->seid;
 | |
| 			ret = i40e_reconstitute_veb(pf->veb[veb_idx]);
 | |
| 			if (ret)
 | |
| 				break;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| end_reconstitute:
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_get_capabilities - get info about the HW
 | |
|  * @pf: the PF struct
 | |
|  **/
 | |
| static int i40e_get_capabilities(struct i40e_pf *pf)
 | |
| {
 | |
| 	struct i40e_aqc_list_capabilities_element_resp *cap_buf;
 | |
| 	u16 data_size;
 | |
| 	int buf_len;
 | |
| 	int err;
 | |
| 
 | |
| 	buf_len = 40 * sizeof(struct i40e_aqc_list_capabilities_element_resp);
 | |
| 	do {
 | |
| 		cap_buf = kzalloc(buf_len, GFP_KERNEL);
 | |
| 		if (!cap_buf)
 | |
| 			return -ENOMEM;
 | |
| 
 | |
| 		/* this loads the data into the hw struct for us */
 | |
| 		err = i40e_aq_discover_capabilities(&pf->hw, cap_buf, buf_len,
 | |
| 					    &data_size,
 | |
| 					    i40e_aqc_opc_list_func_capabilities,
 | |
| 					    NULL);
 | |
| 		/* data loaded, buffer no longer needed */
 | |
| 		kfree(cap_buf);
 | |
| 
 | |
| 		if (pf->hw.aq.asq_last_status == I40E_AQ_RC_ENOMEM) {
 | |
| 			/* retry with a larger buffer */
 | |
| 			buf_len = data_size;
 | |
| 		} else if (pf->hw.aq.asq_last_status != I40E_AQ_RC_OK) {
 | |
| 			dev_info(&pf->pdev->dev,
 | |
| 				 "capability discovery failed: aq=%d\n",
 | |
| 				 pf->hw.aq.asq_last_status);
 | |
| 			return -ENODEV;
 | |
| 		}
 | |
| 	} while (err);
 | |
| 
 | |
| 	if (((pf->hw.aq.fw_maj_ver == 2) && (pf->hw.aq.fw_min_ver < 22)) ||
 | |
| 	    (pf->hw.aq.fw_maj_ver < 2)) {
 | |
| 		pf->hw.func_caps.num_msix_vectors++;
 | |
| 		pf->hw.func_caps.num_msix_vectors_vf++;
 | |
| 	}
 | |
| 
 | |
| 	if (pf->hw.debug_mask & I40E_DEBUG_USER)
 | |
| 		dev_info(&pf->pdev->dev,
 | |
| 			 "pf=%d, num_vfs=%d, msix_pf=%d, msix_vf=%d, fd_g=%d, fd_b=%d, pf_max_q=%d num_vsi=%d\n",
 | |
| 			 pf->hw.pf_id, pf->hw.func_caps.num_vfs,
 | |
| 			 pf->hw.func_caps.num_msix_vectors,
 | |
| 			 pf->hw.func_caps.num_msix_vectors_vf,
 | |
| 			 pf->hw.func_caps.fd_filters_guaranteed,
 | |
| 			 pf->hw.func_caps.fd_filters_best_effort,
 | |
| 			 pf->hw.func_caps.num_tx_qp,
 | |
| 			 pf->hw.func_caps.num_vsis);
 | |
| 
 | |
| #define DEF_NUM_VSI (1 + (pf->hw.func_caps.fcoe ? 1 : 0) \
 | |
| 		       + pf->hw.func_caps.num_vfs)
 | |
| 	if (pf->hw.revision_id == 0 && (DEF_NUM_VSI > pf->hw.func_caps.num_vsis)) {
 | |
| 		dev_info(&pf->pdev->dev,
 | |
| 			 "got num_vsis %d, setting num_vsis to %d\n",
 | |
| 			 pf->hw.func_caps.num_vsis, DEF_NUM_VSI);
 | |
| 		pf->hw.func_caps.num_vsis = DEF_NUM_VSI;
 | |
| 	}
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int i40e_vsi_clear(struct i40e_vsi *vsi);
 | |
| 
 | |
| /**
 | |
|  * i40e_fdir_sb_setup - initialize the Flow Director resources for Sideband
 | |
|  * @pf: board private structure
 | |
|  **/
 | |
| static void i40e_fdir_sb_setup(struct i40e_pf *pf)
 | |
| {
 | |
| 	struct i40e_vsi *vsi;
 | |
| 	int i;
 | |
| 
 | |
| 	/* quick workaround for an NVM issue that leaves a critical register
 | |
| 	 * uninitialized
 | |
| 	 */
 | |
| 	if (!rd32(&pf->hw, I40E_GLQF_HKEY(0))) {
 | |
| 		static const u32 hkey[] = {
 | |
| 			0xe640d33f, 0xcdfe98ab, 0x73fa7161, 0x0d7a7d36,
 | |
| 			0xeacb7d61, 0xaa4f05b6, 0x9c5c89ed, 0xfc425ddb,
 | |
| 			0xa4654832, 0xfc7461d4, 0x8f827619, 0xf5c63c21,
 | |
| 			0x95b3a76d};
 | |
| 
 | |
| 		for (i = 0; i <= I40E_GLQF_HKEY_MAX_INDEX; i++)
 | |
| 			wr32(&pf->hw, I40E_GLQF_HKEY(i), hkey[i]);
 | |
| 	}
 | |
| 
 | |
| 	if (!(pf->flags & I40E_FLAG_FD_SB_ENABLED))
 | |
| 		return;
 | |
| 
 | |
| 	/* find existing VSI and see if it needs configuring */
 | |
| 	vsi = NULL;
 | |
| 	for (i = 0; i < pf->num_alloc_vsi; i++) {
 | |
| 		if (pf->vsi[i] && pf->vsi[i]->type == I40E_VSI_FDIR) {
 | |
| 			vsi = pf->vsi[i];
 | |
| 			break;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	/* create a new VSI if none exists */
 | |
| 	if (!vsi) {
 | |
| 		vsi = i40e_vsi_setup(pf, I40E_VSI_FDIR,
 | |
| 				     pf->vsi[pf->lan_vsi]->seid, 0);
 | |
| 		if (!vsi) {
 | |
| 			dev_info(&pf->pdev->dev, "Couldn't create FDir VSI\n");
 | |
| 			pf->flags &= ~I40E_FLAG_FD_SB_ENABLED;
 | |
| 			return;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	i40e_vsi_setup_irqhandler(vsi, i40e_fdir_clean_ring);
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_fdir_teardown - release the Flow Director resources
 | |
|  * @pf: board private structure
 | |
|  **/
 | |
| static void i40e_fdir_teardown(struct i40e_pf *pf)
 | |
| {
 | |
| 	int i;
 | |
| 
 | |
| 	i40e_fdir_filter_exit(pf);
 | |
| 	for (i = 0; i < pf->num_alloc_vsi; i++) {
 | |
| 		if (pf->vsi[i] && pf->vsi[i]->type == I40E_VSI_FDIR) {
 | |
| 			i40e_vsi_release(pf->vsi[i]);
 | |
| 			break;
 | |
| 		}
 | |
| 	}
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_prep_for_reset - prep for the core to reset
 | |
|  * @pf: board private structure
 | |
|  *
 | |
|  * Close up the VFs and other things in prep for pf Reset.
 | |
|   **/
 | |
| static void i40e_prep_for_reset(struct i40e_pf *pf)
 | |
| {
 | |
| 	struct i40e_hw *hw = &pf->hw;
 | |
| 	i40e_status ret = 0;
 | |
| 	u32 v;
 | |
| 
 | |
| 	clear_bit(__I40E_RESET_INTR_RECEIVED, &pf->state);
 | |
| 	if (test_and_set_bit(__I40E_RESET_RECOVERY_PENDING, &pf->state))
 | |
| 		return;
 | |
| 
 | |
| 	dev_dbg(&pf->pdev->dev, "Tearing down internal switch for reset\n");
 | |
| 
 | |
| 	/* quiesce the VSIs and their queues that are not already DOWN */
 | |
| 	i40e_pf_quiesce_all_vsi(pf);
 | |
| 
 | |
| 	for (v = 0; v < pf->num_alloc_vsi; v++) {
 | |
| 		if (pf->vsi[v])
 | |
| 			pf->vsi[v]->seid = 0;
 | |
| 	}
 | |
| 
 | |
| 	i40e_shutdown_adminq(&pf->hw);
 | |
| 
 | |
| 	/* call shutdown HMC */
 | |
| 	if (hw->hmc.hmc_obj) {
 | |
| 		ret = i40e_shutdown_lan_hmc(hw);
 | |
| 		if (ret)
 | |
| 			dev_warn(&pf->pdev->dev,
 | |
| 				 "shutdown_lan_hmc failed: %d\n", ret);
 | |
| 	}
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_send_version - update firmware with driver version
 | |
|  * @pf: PF struct
 | |
|  */
 | |
| static void i40e_send_version(struct i40e_pf *pf)
 | |
| {
 | |
| 	struct i40e_driver_version dv;
 | |
| 
 | |
| 	dv.major_version = DRV_VERSION_MAJOR;
 | |
| 	dv.minor_version = DRV_VERSION_MINOR;
 | |
| 	dv.build_version = DRV_VERSION_BUILD;
 | |
| 	dv.subbuild_version = 0;
 | |
| 	strlcpy(dv.driver_string, DRV_VERSION, sizeof(dv.driver_string));
 | |
| 	i40e_aq_send_driver_version(&pf->hw, &dv, NULL);
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_reset_and_rebuild - reset and rebuild using a saved config
 | |
|  * @pf: board private structure
 | |
|  * @reinit: if the Main VSI needs to re-initialized.
 | |
|  **/
 | |
| static void i40e_reset_and_rebuild(struct i40e_pf *pf, bool reinit)
 | |
| {
 | |
| 	struct i40e_hw *hw = &pf->hw;
 | |
| 	i40e_status ret;
 | |
| 	u32 v;
 | |
| 
 | |
| 	/* Now we wait for GRST to settle out.
 | |
| 	 * We don't have to delete the VEBs or VSIs from the hw switch
 | |
| 	 * because the reset will make them disappear.
 | |
| 	 */
 | |
| 	ret = i40e_pf_reset(hw);
 | |
| 	if (ret) {
 | |
| 		dev_info(&pf->pdev->dev, "PF reset failed, %d\n", ret);
 | |
| 		goto end_core_reset;
 | |
| 	}
 | |
| 	pf->pfr_count++;
 | |
| 
 | |
| 	if (test_bit(__I40E_DOWN, &pf->state))
 | |
| 		goto end_core_reset;
 | |
| 	dev_dbg(&pf->pdev->dev, "Rebuilding internal switch\n");
 | |
| 
 | |
| 	/* rebuild the basics for the AdminQ, HMC, and initial HW switch */
 | |
| 	ret = i40e_init_adminq(&pf->hw);
 | |
| 	if (ret) {
 | |
| 		dev_info(&pf->pdev->dev, "Rebuild AdminQ failed, %d\n", ret);
 | |
| 		goto end_core_reset;
 | |
| 	}
 | |
| 
 | |
| 	/* re-verify the eeprom if we just had an EMP reset */
 | |
| 	if (test_bit(__I40E_EMP_RESET_REQUESTED, &pf->state)) {
 | |
| 		clear_bit(__I40E_EMP_RESET_REQUESTED, &pf->state);
 | |
| 		i40e_verify_eeprom(pf);
 | |
| 	}
 | |
| 
 | |
| 	i40e_clear_pxe_mode(hw);
 | |
| 	ret = i40e_get_capabilities(pf);
 | |
| 	if (ret) {
 | |
| 		dev_info(&pf->pdev->dev, "i40e_get_capabilities failed, %d\n",
 | |
| 			 ret);
 | |
| 		goto end_core_reset;
 | |
| 	}
 | |
| 
 | |
| 	ret = i40e_init_lan_hmc(hw, hw->func_caps.num_tx_qp,
 | |
| 				hw->func_caps.num_rx_qp,
 | |
| 				pf->fcoe_hmc_cntx_num, pf->fcoe_hmc_filt_num);
 | |
| 	if (ret) {
 | |
| 		dev_info(&pf->pdev->dev, "init_lan_hmc failed: %d\n", ret);
 | |
| 		goto end_core_reset;
 | |
| 	}
 | |
| 	ret = i40e_configure_lan_hmc(hw, I40E_HMC_MODEL_DIRECT_ONLY);
 | |
| 	if (ret) {
 | |
| 		dev_info(&pf->pdev->dev, "configure_lan_hmc failed: %d\n", ret);
 | |
| 		goto end_core_reset;
 | |
| 	}
 | |
| 
 | |
| #ifdef CONFIG_I40E_DCB
 | |
| 	ret = i40e_init_pf_dcb(pf);
 | |
| 	if (ret) {
 | |
| 		dev_info(&pf->pdev->dev, "init_pf_dcb failed: %d\n", ret);
 | |
| 		goto end_core_reset;
 | |
| 	}
 | |
| #endif /* CONFIG_I40E_DCB */
 | |
| #ifdef I40E_FCOE
 | |
| 	ret = i40e_init_pf_fcoe(pf);
 | |
| 	if (ret)
 | |
| 		dev_info(&pf->pdev->dev, "init_pf_fcoe failed: %d\n", ret);
 | |
| 
 | |
| #endif
 | |
| 	/* do basic switch setup */
 | |
| 	ret = i40e_setup_pf_switch(pf, reinit);
 | |
| 	if (ret)
 | |
| 		goto end_core_reset;
 | |
| 
 | |
| 	/* Rebuild the VSIs and VEBs that existed before reset.
 | |
| 	 * They are still in our local switch element arrays, so only
 | |
| 	 * need to rebuild the switch model in the HW.
 | |
| 	 *
 | |
| 	 * If there were VEBs but the reconstitution failed, we'll try
 | |
| 	 * try to recover minimal use by getting the basic PF VSI working.
 | |
| 	 */
 | |
| 	if (pf->vsi[pf->lan_vsi]->uplink_seid != pf->mac_seid) {
 | |
| 		dev_dbg(&pf->pdev->dev, "attempting to rebuild switch\n");
 | |
| 		/* find the one VEB connected to the MAC, and find orphans */
 | |
| 		for (v = 0; v < I40E_MAX_VEB; v++) {
 | |
| 			if (!pf->veb[v])
 | |
| 				continue;
 | |
| 
 | |
| 			if (pf->veb[v]->uplink_seid == pf->mac_seid ||
 | |
| 			    pf->veb[v]->uplink_seid == 0) {
 | |
| 				ret = i40e_reconstitute_veb(pf->veb[v]);
 | |
| 
 | |
| 				if (!ret)
 | |
| 					continue;
 | |
| 
 | |
| 				/* If Main VEB failed, we're in deep doodoo,
 | |
| 				 * so give up rebuilding the switch and set up
 | |
| 				 * for minimal rebuild of PF VSI.
 | |
| 				 * If orphan failed, we'll report the error
 | |
| 				 * but try to keep going.
 | |
| 				 */
 | |
| 				if (pf->veb[v]->uplink_seid == pf->mac_seid) {
 | |
| 					dev_info(&pf->pdev->dev,
 | |
| 						 "rebuild of switch failed: %d, will try to set up simple PF connection\n",
 | |
| 						 ret);
 | |
| 					pf->vsi[pf->lan_vsi]->uplink_seid
 | |
| 								= pf->mac_seid;
 | |
| 					break;
 | |
| 				} else if (pf->veb[v]->uplink_seid == 0) {
 | |
| 					dev_info(&pf->pdev->dev,
 | |
| 						 "rebuild of orphan VEB failed: %d\n",
 | |
| 						 ret);
 | |
| 				}
 | |
| 			}
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	if (pf->vsi[pf->lan_vsi]->uplink_seid == pf->mac_seid) {
 | |
| 		dev_dbg(&pf->pdev->dev, "attempting to rebuild PF VSI\n");
 | |
| 		/* no VEB, so rebuild only the Main VSI */
 | |
| 		ret = i40e_add_vsi(pf->vsi[pf->lan_vsi]);
 | |
| 		if (ret) {
 | |
| 			dev_info(&pf->pdev->dev,
 | |
| 				 "rebuild of Main VSI failed: %d\n", ret);
 | |
| 			goto end_core_reset;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	/* reinit the misc interrupt */
 | |
| 	if (pf->flags & I40E_FLAG_MSIX_ENABLED)
 | |
| 		ret = i40e_setup_misc_vector(pf);
 | |
| 
 | |
| 	/* restart the VSIs that were rebuilt and running before the reset */
 | |
| 	i40e_pf_unquiesce_all_vsi(pf);
 | |
| 
 | |
| 	if (pf->num_alloc_vfs) {
 | |
| 		for (v = 0; v < pf->num_alloc_vfs; v++)
 | |
| 			i40e_reset_vf(&pf->vf[v], true);
 | |
| 	}
 | |
| 
 | |
| 	/* tell the firmware that we're starting */
 | |
| 	i40e_send_version(pf);
 | |
| 
 | |
| end_core_reset:
 | |
| 	clear_bit(__I40E_RESET_RECOVERY_PENDING, &pf->state);
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_handle_reset_warning - prep for the pf to reset, reset and rebuild
 | |
|  * @pf: board private structure
 | |
|  *
 | |
|  * Close up the VFs and other things in prep for a Core Reset,
 | |
|  * then get ready to rebuild the world.
 | |
|  **/
 | |
| static void i40e_handle_reset_warning(struct i40e_pf *pf)
 | |
| {
 | |
| 	i40e_prep_for_reset(pf);
 | |
| 	i40e_reset_and_rebuild(pf, false);
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_handle_mdd_event
 | |
|  * @pf: pointer to the pf structure
 | |
|  *
 | |
|  * Called from the MDD irq handler to identify possibly malicious vfs
 | |
|  **/
 | |
| static void i40e_handle_mdd_event(struct i40e_pf *pf)
 | |
| {
 | |
| 	struct i40e_hw *hw = &pf->hw;
 | |
| 	bool mdd_detected = false;
 | |
| 	bool pf_mdd_detected = false;
 | |
| 	struct i40e_vf *vf;
 | |
| 	u32 reg;
 | |
| 	int i;
 | |
| 
 | |
| 	if (!test_bit(__I40E_MDD_EVENT_PENDING, &pf->state))
 | |
| 		return;
 | |
| 
 | |
| 	/* find what triggered the MDD event */
 | |
| 	reg = rd32(hw, I40E_GL_MDET_TX);
 | |
| 	if (reg & I40E_GL_MDET_TX_VALID_MASK) {
 | |
| 		u8 pf_num = (reg & I40E_GL_MDET_TX_PF_NUM_MASK) >>
 | |
| 				I40E_GL_MDET_TX_PF_NUM_SHIFT;
 | |
| 		u8 vf_num = (reg & I40E_GL_MDET_TX_VF_NUM_MASK) >>
 | |
| 				I40E_GL_MDET_TX_VF_NUM_SHIFT;
 | |
| 		u8 event = (reg & I40E_GL_MDET_TX_EVENT_SHIFT) >>
 | |
| 				I40E_GL_MDET_TX_EVENT_SHIFT;
 | |
| 		u8 queue = (reg & I40E_GL_MDET_TX_QUEUE_MASK) >>
 | |
| 				I40E_GL_MDET_TX_QUEUE_SHIFT;
 | |
| 		dev_info(&pf->pdev->dev,
 | |
| 			 "Malicious Driver Detection event 0x%02x on TX queue %d pf number 0x%02x vf number 0x%02x\n",
 | |
| 			 event, queue, pf_num, vf_num);
 | |
| 		wr32(hw, I40E_GL_MDET_TX, 0xffffffff);
 | |
| 		mdd_detected = true;
 | |
| 	}
 | |
| 	reg = rd32(hw, I40E_GL_MDET_RX);
 | |
| 	if (reg & I40E_GL_MDET_RX_VALID_MASK) {
 | |
| 		u8 func = (reg & I40E_GL_MDET_RX_FUNCTION_MASK) >>
 | |
| 				I40E_GL_MDET_RX_FUNCTION_SHIFT;
 | |
| 		u8 event = (reg & I40E_GL_MDET_RX_EVENT_SHIFT) >>
 | |
| 				I40E_GL_MDET_RX_EVENT_SHIFT;
 | |
| 		u8 queue = (reg & I40E_GL_MDET_RX_QUEUE_MASK) >>
 | |
| 				I40E_GL_MDET_RX_QUEUE_SHIFT;
 | |
| 		dev_info(&pf->pdev->dev,
 | |
| 			 "Malicious Driver Detection event 0x%02x on RX queue %d of function 0x%02x\n",
 | |
| 			 event, queue, func);
 | |
| 		wr32(hw, I40E_GL_MDET_RX, 0xffffffff);
 | |
| 		mdd_detected = true;
 | |
| 	}
 | |
| 
 | |
| 	if (mdd_detected) {
 | |
| 		reg = rd32(hw, I40E_PF_MDET_TX);
 | |
| 		if (reg & I40E_PF_MDET_TX_VALID_MASK) {
 | |
| 			wr32(hw, I40E_PF_MDET_TX, 0xFFFF);
 | |
| 			dev_info(&pf->pdev->dev,
 | |
| 				 "MDD TX event is for this function 0x%08x, requesting PF reset.\n",
 | |
| 				 reg);
 | |
| 			pf_mdd_detected = true;
 | |
| 		}
 | |
| 		reg = rd32(hw, I40E_PF_MDET_RX);
 | |
| 		if (reg & I40E_PF_MDET_RX_VALID_MASK) {
 | |
| 			wr32(hw, I40E_PF_MDET_RX, 0xFFFF);
 | |
| 			dev_info(&pf->pdev->dev,
 | |
| 				 "MDD RX event is for this function 0x%08x, requesting PF reset.\n",
 | |
| 				 reg);
 | |
| 			pf_mdd_detected = true;
 | |
| 		}
 | |
| 		/* Queue belongs to the PF, initiate a reset */
 | |
| 		if (pf_mdd_detected) {
 | |
| 			set_bit(__I40E_PF_RESET_REQUESTED, &pf->state);
 | |
| 			i40e_service_event_schedule(pf);
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	/* see if one of the VFs needs its hand slapped */
 | |
| 	for (i = 0; i < pf->num_alloc_vfs && mdd_detected; i++) {
 | |
| 		vf = &(pf->vf[i]);
 | |
| 		reg = rd32(hw, I40E_VP_MDET_TX(i));
 | |
| 		if (reg & I40E_VP_MDET_TX_VALID_MASK) {
 | |
| 			wr32(hw, I40E_VP_MDET_TX(i), 0xFFFF);
 | |
| 			vf->num_mdd_events++;
 | |
| 			dev_info(&pf->pdev->dev, "MDD TX event on VF %d\n", i);
 | |
| 		}
 | |
| 
 | |
| 		reg = rd32(hw, I40E_VP_MDET_RX(i));
 | |
| 		if (reg & I40E_VP_MDET_RX_VALID_MASK) {
 | |
| 			wr32(hw, I40E_VP_MDET_RX(i), 0xFFFF);
 | |
| 			vf->num_mdd_events++;
 | |
| 			dev_info(&pf->pdev->dev, "MDD RX event on VF %d\n", i);
 | |
| 		}
 | |
| 
 | |
| 		if (vf->num_mdd_events > I40E_DEFAULT_NUM_MDD_EVENTS_ALLOWED) {
 | |
| 			dev_info(&pf->pdev->dev,
 | |
| 				 "Too many MDD events on VF %d, disabled\n", i);
 | |
| 			dev_info(&pf->pdev->dev,
 | |
| 				 "Use PF Control I/F to re-enable the VF\n");
 | |
| 			set_bit(I40E_VF_STAT_DISABLED, &vf->vf_states);
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	/* re-enable mdd interrupt cause */
 | |
| 	clear_bit(__I40E_MDD_EVENT_PENDING, &pf->state);
 | |
| 	reg = rd32(hw, I40E_PFINT_ICR0_ENA);
 | |
| 	reg |=  I40E_PFINT_ICR0_ENA_MAL_DETECT_MASK;
 | |
| 	wr32(hw, I40E_PFINT_ICR0_ENA, reg);
 | |
| 	i40e_flush(hw);
 | |
| }
 | |
| 
 | |
| #ifdef CONFIG_I40E_VXLAN
 | |
| /**
 | |
|  * i40e_sync_vxlan_filters_subtask - Sync the VSI filter list with HW
 | |
|  * @pf: board private structure
 | |
|  **/
 | |
| static void i40e_sync_vxlan_filters_subtask(struct i40e_pf *pf)
 | |
| {
 | |
| 	struct i40e_hw *hw = &pf->hw;
 | |
| 	i40e_status ret;
 | |
| 	u8 filter_index;
 | |
| 	__be16 port;
 | |
| 	int i;
 | |
| 
 | |
| 	if (!(pf->flags & I40E_FLAG_VXLAN_FILTER_SYNC))
 | |
| 		return;
 | |
| 
 | |
| 	pf->flags &= ~I40E_FLAG_VXLAN_FILTER_SYNC;
 | |
| 
 | |
| 	for (i = 0; i < I40E_MAX_PF_UDP_OFFLOAD_PORTS; i++) {
 | |
| 		if (pf->pending_vxlan_bitmap & (1 << i)) {
 | |
| 			pf->pending_vxlan_bitmap &= ~(1 << i);
 | |
| 			port = pf->vxlan_ports[i];
 | |
| 			ret = port ?
 | |
| 			      i40e_aq_add_udp_tunnel(hw, ntohs(port),
 | |
| 						     I40E_AQC_TUNNEL_TYPE_VXLAN,
 | |
| 						     &filter_index, NULL)
 | |
| 			      : i40e_aq_del_udp_tunnel(hw, i, NULL);
 | |
| 
 | |
| 			if (ret) {
 | |
| 				dev_info(&pf->pdev->dev, "Failed to execute AQ command for %s port %d with index %d\n",
 | |
| 					 port ? "adding" : "deleting",
 | |
| 					 ntohs(port), port ? i : i);
 | |
| 
 | |
| 				pf->vxlan_ports[i] = 0;
 | |
| 			} else {
 | |
| 				dev_info(&pf->pdev->dev, "%s port %d with AQ command with index %d\n",
 | |
| 					 port ? "Added" : "Deleted",
 | |
| 					 ntohs(port), port ? i : filter_index);
 | |
| 			}
 | |
| 		}
 | |
| 	}
 | |
| }
 | |
| 
 | |
| #endif
 | |
| /**
 | |
|  * i40e_service_task - Run the driver's async subtasks
 | |
|  * @work: pointer to work_struct containing our data
 | |
|  **/
 | |
| static void i40e_service_task(struct work_struct *work)
 | |
| {
 | |
| 	struct i40e_pf *pf = container_of(work,
 | |
| 					  struct i40e_pf,
 | |
| 					  service_task);
 | |
| 	unsigned long start_time = jiffies;
 | |
| 
 | |
| 	/* don't bother with service tasks if a reset is in progress */
 | |
| 	if (test_bit(__I40E_RESET_RECOVERY_PENDING, &pf->state)) {
 | |
| 		i40e_service_event_complete(pf);
 | |
| 		return;
 | |
| 	}
 | |
| 
 | |
| 	i40e_reset_subtask(pf);
 | |
| 	i40e_handle_mdd_event(pf);
 | |
| 	i40e_vc_process_vflr_event(pf);
 | |
| 	i40e_watchdog_subtask(pf);
 | |
| 	i40e_fdir_reinit_subtask(pf);
 | |
| 	i40e_check_hang_subtask(pf);
 | |
| 	i40e_sync_filters_subtask(pf);
 | |
| #ifdef CONFIG_I40E_VXLAN
 | |
| 	i40e_sync_vxlan_filters_subtask(pf);
 | |
| #endif
 | |
| 	i40e_clean_adminq_subtask(pf);
 | |
| 
 | |
| 	i40e_service_event_complete(pf);
 | |
| 
 | |
| 	/* If the tasks have taken longer than one timer cycle or there
 | |
| 	 * is more work to be done, reschedule the service task now
 | |
| 	 * rather than wait for the timer to tick again.
 | |
| 	 */
 | |
| 	if (time_after(jiffies, (start_time + pf->service_timer_period)) ||
 | |
| 	    test_bit(__I40E_ADMINQ_EVENT_PENDING, &pf->state)		 ||
 | |
| 	    test_bit(__I40E_MDD_EVENT_PENDING, &pf->state)		 ||
 | |
| 	    test_bit(__I40E_VFLR_EVENT_PENDING, &pf->state))
 | |
| 		i40e_service_event_schedule(pf);
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_service_timer - timer callback
 | |
|  * @data: pointer to PF struct
 | |
|  **/
 | |
| static void i40e_service_timer(unsigned long data)
 | |
| {
 | |
| 	struct i40e_pf *pf = (struct i40e_pf *)data;
 | |
| 
 | |
| 	mod_timer(&pf->service_timer,
 | |
| 		  round_jiffies(jiffies + pf->service_timer_period));
 | |
| 	i40e_service_event_schedule(pf);
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_set_num_rings_in_vsi - Determine number of rings in the VSI
 | |
|  * @vsi: the VSI being configured
 | |
|  **/
 | |
| static int i40e_set_num_rings_in_vsi(struct i40e_vsi *vsi)
 | |
| {
 | |
| 	struct i40e_pf *pf = vsi->back;
 | |
| 
 | |
| 	switch (vsi->type) {
 | |
| 	case I40E_VSI_MAIN:
 | |
| 		vsi->alloc_queue_pairs = pf->num_lan_qps;
 | |
| 		vsi->num_desc = ALIGN(I40E_DEFAULT_NUM_DESCRIPTORS,
 | |
| 				      I40E_REQ_DESCRIPTOR_MULTIPLE);
 | |
| 		if (pf->flags & I40E_FLAG_MSIX_ENABLED)
 | |
| 			vsi->num_q_vectors = pf->num_lan_msix;
 | |
| 		else
 | |
| 			vsi->num_q_vectors = 1;
 | |
| 
 | |
| 		break;
 | |
| 
 | |
| 	case I40E_VSI_FDIR:
 | |
| 		vsi->alloc_queue_pairs = 1;
 | |
| 		vsi->num_desc = ALIGN(I40E_FDIR_RING_COUNT,
 | |
| 				      I40E_REQ_DESCRIPTOR_MULTIPLE);
 | |
| 		vsi->num_q_vectors = 1;
 | |
| 		break;
 | |
| 
 | |
| 	case I40E_VSI_VMDQ2:
 | |
| 		vsi->alloc_queue_pairs = pf->num_vmdq_qps;
 | |
| 		vsi->num_desc = ALIGN(I40E_DEFAULT_NUM_DESCRIPTORS,
 | |
| 				      I40E_REQ_DESCRIPTOR_MULTIPLE);
 | |
| 		vsi->num_q_vectors = pf->num_vmdq_msix;
 | |
| 		break;
 | |
| 
 | |
| 	case I40E_VSI_SRIOV:
 | |
| 		vsi->alloc_queue_pairs = pf->num_vf_qps;
 | |
| 		vsi->num_desc = ALIGN(I40E_DEFAULT_NUM_DESCRIPTORS,
 | |
| 				      I40E_REQ_DESCRIPTOR_MULTIPLE);
 | |
| 		break;
 | |
| 
 | |
| #ifdef I40E_FCOE
 | |
| 	case I40E_VSI_FCOE:
 | |
| 		vsi->alloc_queue_pairs = pf->num_fcoe_qps;
 | |
| 		vsi->num_desc = ALIGN(I40E_DEFAULT_NUM_DESCRIPTORS,
 | |
| 				      I40E_REQ_DESCRIPTOR_MULTIPLE);
 | |
| 		vsi->num_q_vectors = pf->num_fcoe_msix;
 | |
| 		break;
 | |
| 
 | |
| #endif /* I40E_FCOE */
 | |
| 	default:
 | |
| 		WARN_ON(1);
 | |
| 		return -ENODATA;
 | |
| 	}
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_vsi_alloc_arrays - Allocate queue and vector pointer arrays for the vsi
 | |
|  * @type: VSI pointer
 | |
|  * @alloc_qvectors: a bool to specify if q_vectors need to be allocated.
 | |
|  *
 | |
|  * On error: returns error code (negative)
 | |
|  * On success: returns 0
 | |
|  **/
 | |
| static int i40e_vsi_alloc_arrays(struct i40e_vsi *vsi, bool alloc_qvectors)
 | |
| {
 | |
| 	int size;
 | |
| 	int ret = 0;
 | |
| 
 | |
| 	/* allocate memory for both Tx and Rx ring pointers */
 | |
| 	size = sizeof(struct i40e_ring *) * vsi->alloc_queue_pairs * 2;
 | |
| 	vsi->tx_rings = kzalloc(size, GFP_KERNEL);
 | |
| 	if (!vsi->tx_rings)
 | |
| 		return -ENOMEM;
 | |
| 	vsi->rx_rings = &vsi->tx_rings[vsi->alloc_queue_pairs];
 | |
| 
 | |
| 	if (alloc_qvectors) {
 | |
| 		/* allocate memory for q_vector pointers */
 | |
| 		size = sizeof(struct i40e_q_vector *) * vsi->num_q_vectors;
 | |
| 		vsi->q_vectors = kzalloc(size, GFP_KERNEL);
 | |
| 		if (!vsi->q_vectors) {
 | |
| 			ret = -ENOMEM;
 | |
| 			goto err_vectors;
 | |
| 		}
 | |
| 	}
 | |
| 	return ret;
 | |
| 
 | |
| err_vectors:
 | |
| 	kfree(vsi->tx_rings);
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_vsi_mem_alloc - Allocates the next available struct vsi in the PF
 | |
|  * @pf: board private structure
 | |
|  * @type: type of VSI
 | |
|  *
 | |
|  * On error: returns error code (negative)
 | |
|  * On success: returns vsi index in PF (positive)
 | |
|  **/
 | |
| static int i40e_vsi_mem_alloc(struct i40e_pf *pf, enum i40e_vsi_type type)
 | |
| {
 | |
| 	int ret = -ENODEV;
 | |
| 	struct i40e_vsi *vsi;
 | |
| 	int vsi_idx;
 | |
| 	int i;
 | |
| 
 | |
| 	/* Need to protect the allocation of the VSIs at the PF level */
 | |
| 	mutex_lock(&pf->switch_mutex);
 | |
| 
 | |
| 	/* VSI list may be fragmented if VSI creation/destruction has
 | |
| 	 * been happening.  We can afford to do a quick scan to look
 | |
| 	 * for any free VSIs in the list.
 | |
| 	 *
 | |
| 	 * find next empty vsi slot, looping back around if necessary
 | |
| 	 */
 | |
| 	i = pf->next_vsi;
 | |
| 	while (i < pf->num_alloc_vsi && pf->vsi[i])
 | |
| 		i++;
 | |
| 	if (i >= pf->num_alloc_vsi) {
 | |
| 		i = 0;
 | |
| 		while (i < pf->next_vsi && pf->vsi[i])
 | |
| 			i++;
 | |
| 	}
 | |
| 
 | |
| 	if (i < pf->num_alloc_vsi && !pf->vsi[i]) {
 | |
| 		vsi_idx = i;             /* Found one! */
 | |
| 	} else {
 | |
| 		ret = -ENODEV;
 | |
| 		goto unlock_pf;  /* out of VSI slots! */
 | |
| 	}
 | |
| 	pf->next_vsi = ++i;
 | |
| 
 | |
| 	vsi = kzalloc(sizeof(*vsi), GFP_KERNEL);
 | |
| 	if (!vsi) {
 | |
| 		ret = -ENOMEM;
 | |
| 		goto unlock_pf;
 | |
| 	}
 | |
| 	vsi->type = type;
 | |
| 	vsi->back = pf;
 | |
| 	set_bit(__I40E_DOWN, &vsi->state);
 | |
| 	vsi->flags = 0;
 | |
| 	vsi->idx = vsi_idx;
 | |
| 	vsi->rx_itr_setting = pf->rx_itr_default;
 | |
| 	vsi->tx_itr_setting = pf->tx_itr_default;
 | |
| 	vsi->netdev_registered = false;
 | |
| 	vsi->work_limit = I40E_DEFAULT_IRQ_WORK;
 | |
| 	INIT_LIST_HEAD(&vsi->mac_filter_list);
 | |
| 	vsi->irqs_ready = false;
 | |
| 
 | |
| 	ret = i40e_set_num_rings_in_vsi(vsi);
 | |
| 	if (ret)
 | |
| 		goto err_rings;
 | |
| 
 | |
| 	ret = i40e_vsi_alloc_arrays(vsi, true);
 | |
| 	if (ret)
 | |
| 		goto err_rings;
 | |
| 
 | |
| 	/* Setup default MSIX irq handler for VSI */
 | |
| 	i40e_vsi_setup_irqhandler(vsi, i40e_msix_clean_rings);
 | |
| 
 | |
| 	pf->vsi[vsi_idx] = vsi;
 | |
| 	ret = vsi_idx;
 | |
| 	goto unlock_pf;
 | |
| 
 | |
| err_rings:
 | |
| 	pf->next_vsi = i - 1;
 | |
| 	kfree(vsi);
 | |
| unlock_pf:
 | |
| 	mutex_unlock(&pf->switch_mutex);
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_vsi_free_arrays - Free queue and vector pointer arrays for the VSI
 | |
|  * @type: VSI pointer
 | |
|  * @free_qvectors: a bool to specify if q_vectors need to be freed.
 | |
|  *
 | |
|  * On error: returns error code (negative)
 | |
|  * On success: returns 0
 | |
|  **/
 | |
| static void i40e_vsi_free_arrays(struct i40e_vsi *vsi, bool free_qvectors)
 | |
| {
 | |
| 	/* free the ring and vector containers */
 | |
| 	if (free_qvectors) {
 | |
| 		kfree(vsi->q_vectors);
 | |
| 		vsi->q_vectors = NULL;
 | |
| 	}
 | |
| 	kfree(vsi->tx_rings);
 | |
| 	vsi->tx_rings = NULL;
 | |
| 	vsi->rx_rings = NULL;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_vsi_clear - Deallocate the VSI provided
 | |
|  * @vsi: the VSI being un-configured
 | |
|  **/
 | |
| static int i40e_vsi_clear(struct i40e_vsi *vsi)
 | |
| {
 | |
| 	struct i40e_pf *pf;
 | |
| 
 | |
| 	if (!vsi)
 | |
| 		return 0;
 | |
| 
 | |
| 	if (!vsi->back)
 | |
| 		goto free_vsi;
 | |
| 	pf = vsi->back;
 | |
| 
 | |
| 	mutex_lock(&pf->switch_mutex);
 | |
| 	if (!pf->vsi[vsi->idx]) {
 | |
| 		dev_err(&pf->pdev->dev, "pf->vsi[%d] is NULL, just free vsi[%d](%p,type %d)\n",
 | |
| 			vsi->idx, vsi->idx, vsi, vsi->type);
 | |
| 		goto unlock_vsi;
 | |
| 	}
 | |
| 
 | |
| 	if (pf->vsi[vsi->idx] != vsi) {
 | |
| 		dev_err(&pf->pdev->dev,
 | |
| 			"pf->vsi[%d](%p, type %d) != vsi[%d](%p,type %d): no free!\n",
 | |
| 			pf->vsi[vsi->idx]->idx,
 | |
| 			pf->vsi[vsi->idx],
 | |
| 			pf->vsi[vsi->idx]->type,
 | |
| 			vsi->idx, vsi, vsi->type);
 | |
| 		goto unlock_vsi;
 | |
| 	}
 | |
| 
 | |
| 	/* updates the pf for this cleared vsi */
 | |
| 	i40e_put_lump(pf->qp_pile, vsi->base_queue, vsi->idx);
 | |
| 	i40e_put_lump(pf->irq_pile, vsi->base_vector, vsi->idx);
 | |
| 
 | |
| 	i40e_vsi_free_arrays(vsi, true);
 | |
| 
 | |
| 	pf->vsi[vsi->idx] = NULL;
 | |
| 	if (vsi->idx < pf->next_vsi)
 | |
| 		pf->next_vsi = vsi->idx;
 | |
| 
 | |
| unlock_vsi:
 | |
| 	mutex_unlock(&pf->switch_mutex);
 | |
| free_vsi:
 | |
| 	kfree(vsi);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_vsi_clear_rings - Deallocates the Rx and Tx rings for the provided VSI
 | |
|  * @vsi: the VSI being cleaned
 | |
|  **/
 | |
| static void i40e_vsi_clear_rings(struct i40e_vsi *vsi)
 | |
| {
 | |
| 	int i;
 | |
| 
 | |
| 	if (vsi->tx_rings && vsi->tx_rings[0]) {
 | |
| 		for (i = 0; i < vsi->alloc_queue_pairs; i++) {
 | |
| 			kfree_rcu(vsi->tx_rings[i], rcu);
 | |
| 			vsi->tx_rings[i] = NULL;
 | |
| 			vsi->rx_rings[i] = NULL;
 | |
| 		}
 | |
| 	}
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_alloc_rings - Allocates the Rx and Tx rings for the provided VSI
 | |
|  * @vsi: the VSI being configured
 | |
|  **/
 | |
| static int i40e_alloc_rings(struct i40e_vsi *vsi)
 | |
| {
 | |
| 	struct i40e_ring *tx_ring, *rx_ring;
 | |
| 	struct i40e_pf *pf = vsi->back;
 | |
| 	int i;
 | |
| 
 | |
| 	/* Set basic values in the rings to be used later during open() */
 | |
| 	for (i = 0; i < vsi->alloc_queue_pairs; i++) {
 | |
| 		/* allocate space for both Tx and Rx in one shot */
 | |
| 		tx_ring = kzalloc(sizeof(struct i40e_ring) * 2, GFP_KERNEL);
 | |
| 		if (!tx_ring)
 | |
| 			goto err_out;
 | |
| 
 | |
| 		tx_ring->queue_index = i;
 | |
| 		tx_ring->reg_idx = vsi->base_queue + i;
 | |
| 		tx_ring->ring_active = false;
 | |
| 		tx_ring->vsi = vsi;
 | |
| 		tx_ring->netdev = vsi->netdev;
 | |
| 		tx_ring->dev = &pf->pdev->dev;
 | |
| 		tx_ring->count = vsi->num_desc;
 | |
| 		tx_ring->size = 0;
 | |
| 		tx_ring->dcb_tc = 0;
 | |
| 		vsi->tx_rings[i] = tx_ring;
 | |
| 
 | |
| 		rx_ring = &tx_ring[1];
 | |
| 		rx_ring->queue_index = i;
 | |
| 		rx_ring->reg_idx = vsi->base_queue + i;
 | |
| 		rx_ring->ring_active = false;
 | |
| 		rx_ring->vsi = vsi;
 | |
| 		rx_ring->netdev = vsi->netdev;
 | |
| 		rx_ring->dev = &pf->pdev->dev;
 | |
| 		rx_ring->count = vsi->num_desc;
 | |
| 		rx_ring->size = 0;
 | |
| 		rx_ring->dcb_tc = 0;
 | |
| 		if (pf->flags & I40E_FLAG_16BYTE_RX_DESC_ENABLED)
 | |
| 			set_ring_16byte_desc_enabled(rx_ring);
 | |
| 		else
 | |
| 			clear_ring_16byte_desc_enabled(rx_ring);
 | |
| 		vsi->rx_rings[i] = rx_ring;
 | |
| 	}
 | |
| 
 | |
| 	return 0;
 | |
| 
 | |
| err_out:
 | |
| 	i40e_vsi_clear_rings(vsi);
 | |
| 	return -ENOMEM;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_reserve_msix_vectors - Reserve MSI-X vectors in the kernel
 | |
|  * @pf: board private structure
 | |
|  * @vectors: the number of MSI-X vectors to request
 | |
|  *
 | |
|  * Returns the number of vectors reserved, or error
 | |
|  **/
 | |
| static int i40e_reserve_msix_vectors(struct i40e_pf *pf, int vectors)
 | |
| {
 | |
| 	vectors = pci_enable_msix_range(pf->pdev, pf->msix_entries,
 | |
| 					I40E_MIN_MSIX, vectors);
 | |
| 	if (vectors < 0) {
 | |
| 		dev_info(&pf->pdev->dev,
 | |
| 			 "MSI-X vector reservation failed: %d\n", vectors);
 | |
| 		vectors = 0;
 | |
| 	}
 | |
| 
 | |
| 	return vectors;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_init_msix - Setup the MSIX capability
 | |
|  * @pf: board private structure
 | |
|  *
 | |
|  * Work with the OS to set up the MSIX vectors needed.
 | |
|  *
 | |
|  * Returns 0 on success, negative on failure
 | |
|  **/
 | |
| static int i40e_init_msix(struct i40e_pf *pf)
 | |
| {
 | |
| 	i40e_status err = 0;
 | |
| 	struct i40e_hw *hw = &pf->hw;
 | |
| 	int v_budget, i;
 | |
| 	int vec;
 | |
| 
 | |
| 	if (!(pf->flags & I40E_FLAG_MSIX_ENABLED))
 | |
| 		return -ENODEV;
 | |
| 
 | |
| 	/* The number of vectors we'll request will be comprised of:
 | |
| 	 *   - Add 1 for "other" cause for Admin Queue events, etc.
 | |
| 	 *   - The number of LAN queue pairs
 | |
| 	 *	- Queues being used for RSS.
 | |
| 	 *		We don't need as many as max_rss_size vectors.
 | |
| 	 *		use rss_size instead in the calculation since that
 | |
| 	 *		is governed by number of cpus in the system.
 | |
| 	 *	- assumes symmetric Tx/Rx pairing
 | |
| 	 *   - The number of VMDq pairs
 | |
| #ifdef I40E_FCOE
 | |
| 	 *   - The number of FCOE qps.
 | |
| #endif
 | |
| 	 * Once we count this up, try the request.
 | |
| 	 *
 | |
| 	 * If we can't get what we want, we'll simplify to nearly nothing
 | |
| 	 * and try again.  If that still fails, we punt.
 | |
| 	 */
 | |
| 	pf->num_lan_msix = pf->num_lan_qps - (pf->rss_size_max - pf->rss_size);
 | |
| 	pf->num_vmdq_msix = pf->num_vmdq_qps;
 | |
| 	v_budget = 1 + pf->num_lan_msix;
 | |
| 	v_budget += (pf->num_vmdq_vsis * pf->num_vmdq_msix);
 | |
| 	if (pf->flags & I40E_FLAG_FD_SB_ENABLED)
 | |
| 		v_budget++;
 | |
| 
 | |
| #ifdef I40E_FCOE
 | |
| 	if (pf->flags & I40E_FLAG_FCOE_ENABLED) {
 | |
| 		pf->num_fcoe_msix = pf->num_fcoe_qps;
 | |
| 		v_budget += pf->num_fcoe_msix;
 | |
| 	}
 | |
| 
 | |
| #endif
 | |
| 	/* Scale down if necessary, and the rings will share vectors */
 | |
| 	v_budget = min_t(int, v_budget, hw->func_caps.num_msix_vectors);
 | |
| 
 | |
| 	pf->msix_entries = kcalloc(v_budget, sizeof(struct msix_entry),
 | |
| 				   GFP_KERNEL);
 | |
| 	if (!pf->msix_entries)
 | |
| 		return -ENOMEM;
 | |
| 
 | |
| 	for (i = 0; i < v_budget; i++)
 | |
| 		pf->msix_entries[i].entry = i;
 | |
| 	vec = i40e_reserve_msix_vectors(pf, v_budget);
 | |
| 
 | |
| 	if (vec != v_budget) {
 | |
| 		/* If we have limited resources, we will start with no vectors
 | |
| 		 * for the special features and then allocate vectors to some
 | |
| 		 * of these features based on the policy and at the end disable
 | |
| 		 * the features that did not get any vectors.
 | |
| 		 */
 | |
| #ifdef I40E_FCOE
 | |
| 		pf->num_fcoe_qps = 0;
 | |
| 		pf->num_fcoe_msix = 0;
 | |
| #endif
 | |
| 		pf->num_vmdq_msix = 0;
 | |
| 	}
 | |
| 
 | |
| 	if (vec < I40E_MIN_MSIX) {
 | |
| 		pf->flags &= ~I40E_FLAG_MSIX_ENABLED;
 | |
| 		kfree(pf->msix_entries);
 | |
| 		pf->msix_entries = NULL;
 | |
| 		return -ENODEV;
 | |
| 
 | |
| 	} else if (vec == I40E_MIN_MSIX) {
 | |
| 		/* Adjust for minimal MSIX use */
 | |
| 		pf->num_vmdq_vsis = 0;
 | |
| 		pf->num_vmdq_qps = 0;
 | |
| 		pf->num_lan_qps = 1;
 | |
| 		pf->num_lan_msix = 1;
 | |
| 
 | |
| 	} else if (vec != v_budget) {
 | |
| 		/* reserve the misc vector */
 | |
| 		vec--;
 | |
| 
 | |
| 		/* Scale vector usage down */
 | |
| 		pf->num_vmdq_msix = 1;    /* force VMDqs to only one vector */
 | |
| 		pf->num_vmdq_vsis = 1;
 | |
| 
 | |
| 		/* partition out the remaining vectors */
 | |
| 		switch (vec) {
 | |
| 		case 2:
 | |
| 			pf->num_lan_msix = 1;
 | |
| 			break;
 | |
| 		case 3:
 | |
| #ifdef I40E_FCOE
 | |
| 			/* give one vector to FCoE */
 | |
| 			if (pf->flags & I40E_FLAG_FCOE_ENABLED) {
 | |
| 				pf->num_lan_msix = 1;
 | |
| 				pf->num_fcoe_msix = 1;
 | |
| 			}
 | |
| #else
 | |
| 			pf->num_lan_msix = 2;
 | |
| #endif
 | |
| 			break;
 | |
| 		default:
 | |
| #ifdef I40E_FCOE
 | |
| 			/* give one vector to FCoE */
 | |
| 			if (pf->flags & I40E_FLAG_FCOE_ENABLED) {
 | |
| 				pf->num_fcoe_msix = 1;
 | |
| 				vec--;
 | |
| 			}
 | |
| #endif
 | |
| 			pf->num_lan_msix = min_t(int, (vec / 2),
 | |
| 						 pf->num_lan_qps);
 | |
| 			pf->num_vmdq_vsis = min_t(int, (vec - pf->num_lan_msix),
 | |
| 						  I40E_DEFAULT_NUM_VMDQ_VSI);
 | |
| 			break;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	if ((pf->flags & I40E_FLAG_VMDQ_ENABLED) &&
 | |
| 	    (pf->num_vmdq_msix == 0)) {
 | |
| 		dev_info(&pf->pdev->dev, "VMDq disabled, not enough MSI-X vectors\n");
 | |
| 		pf->flags &= ~I40E_FLAG_VMDQ_ENABLED;
 | |
| 	}
 | |
| #ifdef I40E_FCOE
 | |
| 
 | |
| 	if ((pf->flags & I40E_FLAG_FCOE_ENABLED) && (pf->num_fcoe_msix == 0)) {
 | |
| 		dev_info(&pf->pdev->dev, "FCOE disabled, not enough MSI-X vectors\n");
 | |
| 		pf->flags &= ~I40E_FLAG_FCOE_ENABLED;
 | |
| 	}
 | |
| #endif
 | |
| 	return err;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_vsi_alloc_q_vector - Allocate memory for a single interrupt vector
 | |
|  * @vsi: the VSI being configured
 | |
|  * @v_idx: index of the vector in the vsi struct
 | |
|  *
 | |
|  * We allocate one q_vector.  If allocation fails we return -ENOMEM.
 | |
|  **/
 | |
| static int i40e_vsi_alloc_q_vector(struct i40e_vsi *vsi, int v_idx)
 | |
| {
 | |
| 	struct i40e_q_vector *q_vector;
 | |
| 
 | |
| 	/* allocate q_vector */
 | |
| 	q_vector = kzalloc(sizeof(struct i40e_q_vector), GFP_KERNEL);
 | |
| 	if (!q_vector)
 | |
| 		return -ENOMEM;
 | |
| 
 | |
| 	q_vector->vsi = vsi;
 | |
| 	q_vector->v_idx = v_idx;
 | |
| 	cpumask_set_cpu(v_idx, &q_vector->affinity_mask);
 | |
| 	if (vsi->netdev)
 | |
| 		netif_napi_add(vsi->netdev, &q_vector->napi,
 | |
| 			       i40e_napi_poll, NAPI_POLL_WEIGHT);
 | |
| 
 | |
| 	q_vector->rx.latency_range = I40E_LOW_LATENCY;
 | |
| 	q_vector->tx.latency_range = I40E_LOW_LATENCY;
 | |
| 
 | |
| 	/* tie q_vector and vsi together */
 | |
| 	vsi->q_vectors[v_idx] = q_vector;
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_vsi_alloc_q_vectors - Allocate memory for interrupt vectors
 | |
|  * @vsi: the VSI being configured
 | |
|  *
 | |
|  * We allocate one q_vector per queue interrupt.  If allocation fails we
 | |
|  * return -ENOMEM.
 | |
|  **/
 | |
| static int i40e_vsi_alloc_q_vectors(struct i40e_vsi *vsi)
 | |
| {
 | |
| 	struct i40e_pf *pf = vsi->back;
 | |
| 	int v_idx, num_q_vectors;
 | |
| 	int err;
 | |
| 
 | |
| 	/* if not MSIX, give the one vector only to the LAN VSI */
 | |
| 	if (pf->flags & I40E_FLAG_MSIX_ENABLED)
 | |
| 		num_q_vectors = vsi->num_q_vectors;
 | |
| 	else if (vsi == pf->vsi[pf->lan_vsi])
 | |
| 		num_q_vectors = 1;
 | |
| 	else
 | |
| 		return -EINVAL;
 | |
| 
 | |
| 	for (v_idx = 0; v_idx < num_q_vectors; v_idx++) {
 | |
| 		err = i40e_vsi_alloc_q_vector(vsi, v_idx);
 | |
| 		if (err)
 | |
| 			goto err_out;
 | |
| 	}
 | |
| 
 | |
| 	return 0;
 | |
| 
 | |
| err_out:
 | |
| 	while (v_idx--)
 | |
| 		i40e_free_q_vector(vsi, v_idx);
 | |
| 
 | |
| 	return err;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_init_interrupt_scheme - Determine proper interrupt scheme
 | |
|  * @pf: board private structure to initialize
 | |
|  **/
 | |
| static void i40e_init_interrupt_scheme(struct i40e_pf *pf)
 | |
| {
 | |
| 	int err = 0;
 | |
| 
 | |
| 	if (pf->flags & I40E_FLAG_MSIX_ENABLED) {
 | |
| 		err = i40e_init_msix(pf);
 | |
| 		if (err) {
 | |
| 			pf->flags &= ~(I40E_FLAG_MSIX_ENABLED	|
 | |
| #ifdef I40E_FCOE
 | |
| 				       I40E_FLAG_FCOE_ENABLED	|
 | |
| #endif
 | |
| 				       I40E_FLAG_RSS_ENABLED	|
 | |
| 				       I40E_FLAG_DCB_CAPABLE	|
 | |
| 				       I40E_FLAG_SRIOV_ENABLED	|
 | |
| 				       I40E_FLAG_FD_SB_ENABLED	|
 | |
| 				       I40E_FLAG_FD_ATR_ENABLED	|
 | |
| 				       I40E_FLAG_VMDQ_ENABLED);
 | |
| 
 | |
| 			/* rework the queue expectations without MSIX */
 | |
| 			i40e_determine_queue_usage(pf);
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	if (!(pf->flags & I40E_FLAG_MSIX_ENABLED) &&
 | |
| 	    (pf->flags & I40E_FLAG_MSI_ENABLED)) {
 | |
| 		dev_info(&pf->pdev->dev, "MSI-X not available, trying MSI\n");
 | |
| 		err = pci_enable_msi(pf->pdev);
 | |
| 		if (err) {
 | |
| 			dev_info(&pf->pdev->dev, "MSI init failed - %d\n", err);
 | |
| 			pf->flags &= ~I40E_FLAG_MSI_ENABLED;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	if (!(pf->flags & (I40E_FLAG_MSIX_ENABLED | I40E_FLAG_MSI_ENABLED)))
 | |
| 		dev_info(&pf->pdev->dev, "MSI-X and MSI not available, falling back to Legacy IRQ\n");
 | |
| 
 | |
| 	/* track first vector for misc interrupts */
 | |
| 	err = i40e_get_lump(pf, pf->irq_pile, 1, I40E_PILE_VALID_BIT-1);
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_setup_misc_vector - Setup the misc vector to handle non queue events
 | |
|  * @pf: board private structure
 | |
|  *
 | |
|  * This sets up the handler for MSIX 0, which is used to manage the
 | |
|  * non-queue interrupts, e.g. AdminQ and errors.  This is not used
 | |
|  * when in MSI or Legacy interrupt mode.
 | |
|  **/
 | |
| static int i40e_setup_misc_vector(struct i40e_pf *pf)
 | |
| {
 | |
| 	struct i40e_hw *hw = &pf->hw;
 | |
| 	int err = 0;
 | |
| 
 | |
| 	/* Only request the irq if this is the first time through, and
 | |
| 	 * not when we're rebuilding after a Reset
 | |
| 	 */
 | |
| 	if (!test_bit(__I40E_RESET_RECOVERY_PENDING, &pf->state)) {
 | |
| 		err = request_irq(pf->msix_entries[0].vector,
 | |
| 				  i40e_intr, 0, pf->misc_int_name, pf);
 | |
| 		if (err) {
 | |
| 			dev_info(&pf->pdev->dev,
 | |
| 				 "request_irq for %s failed: %d\n",
 | |
| 				 pf->misc_int_name, err);
 | |
| 			return -EFAULT;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	i40e_enable_misc_int_causes(hw);
 | |
| 
 | |
| 	/* associate no queues to the misc vector */
 | |
| 	wr32(hw, I40E_PFINT_LNKLST0, I40E_QUEUE_END_OF_LIST);
 | |
| 	wr32(hw, I40E_PFINT_ITR0(I40E_RX_ITR), I40E_ITR_8K);
 | |
| 
 | |
| 	i40e_flush(hw);
 | |
| 
 | |
| 	i40e_irq_dynamic_enable_icr0(pf);
 | |
| 
 | |
| 	return err;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_config_rss - Prepare for RSS if used
 | |
|  * @pf: board private structure
 | |
|  **/
 | |
| static int i40e_config_rss(struct i40e_pf *pf)
 | |
| {
 | |
| 	/* Set of random keys generated using kernel random number generator */
 | |
| 	static const u32 seed[I40E_PFQF_HKEY_MAX_INDEX + 1] = {0x41b01687,
 | |
| 				0x183cfd8c, 0xce880440, 0x580cbc3c, 0x35897377,
 | |
| 				0x328b25e1, 0x4fa98922, 0xb7d90c14, 0xd5bad70d,
 | |
| 				0xcd15a2c1, 0xe8580225, 0x4a1e9d11, 0xfe5731be};
 | |
| 	struct i40e_hw *hw = &pf->hw;
 | |
| 	u32 lut = 0;
 | |
| 	int i, j;
 | |
| 	u64 hena;
 | |
| 	u32 reg_val;
 | |
| 
 | |
| 	/* Fill out hash function seed */
 | |
| 	for (i = 0; i <= I40E_PFQF_HKEY_MAX_INDEX; i++)
 | |
| 		wr32(hw, I40E_PFQF_HKEY(i), seed[i]);
 | |
| 
 | |
| 	/* By default we enable TCP/UDP with IPv4/IPv6 ptypes */
 | |
| 	hena = (u64)rd32(hw, I40E_PFQF_HENA(0)) |
 | |
| 		((u64)rd32(hw, I40E_PFQF_HENA(1)) << 32);
 | |
| 	hena |= I40E_DEFAULT_RSS_HENA;
 | |
| 	wr32(hw, I40E_PFQF_HENA(0), (u32)hena);
 | |
| 	wr32(hw, I40E_PFQF_HENA(1), (u32)(hena >> 32));
 | |
| 
 | |
| 	/* Check capability and Set table size and register per hw expectation*/
 | |
| 	reg_val = rd32(hw, I40E_PFQF_CTL_0);
 | |
| 	if (hw->func_caps.rss_table_size == 512) {
 | |
| 		reg_val |= I40E_PFQF_CTL_0_HASHLUTSIZE_512;
 | |
| 		pf->rss_table_size = 512;
 | |
| 	} else {
 | |
| 		pf->rss_table_size = 128;
 | |
| 		reg_val &= ~I40E_PFQF_CTL_0_HASHLUTSIZE_512;
 | |
| 	}
 | |
| 	wr32(hw, I40E_PFQF_CTL_0, reg_val);
 | |
| 
 | |
| 	/* Populate the LUT with max no. of queues in round robin fashion */
 | |
| 	for (i = 0, j = 0; i < pf->rss_table_size; i++, j++) {
 | |
| 
 | |
| 		/* The assumption is that lan qp count will be the highest
 | |
| 		 * qp count for any PF VSI that needs RSS.
 | |
| 		 * If multiple VSIs need RSS support, all the qp counts
 | |
| 		 * for those VSIs should be a power of 2 for RSS to work.
 | |
| 		 * If LAN VSI is the only consumer for RSS then this requirement
 | |
| 		 * is not necessary.
 | |
| 		 */
 | |
| 		if (j == pf->rss_size)
 | |
| 			j = 0;
 | |
| 		/* lut = 4-byte sliding window of 4 lut entries */
 | |
| 		lut = (lut << 8) | (j &
 | |
| 			 ((0x1 << pf->hw.func_caps.rss_table_entry_width) - 1));
 | |
| 		/* On i = 3, we have 4 entries in lut; write to the register */
 | |
| 		if ((i & 3) == 3)
 | |
| 			wr32(hw, I40E_PFQF_HLUT(i >> 2), lut);
 | |
| 	}
 | |
| 	i40e_flush(hw);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_reconfig_rss_queues - change number of queues for rss and rebuild
 | |
|  * @pf: board private structure
 | |
|  * @queue_count: the requested queue count for rss.
 | |
|  *
 | |
|  * returns 0 if rss is not enabled, if enabled returns the final rss queue
 | |
|  * count which may be different from the requested queue count.
 | |
|  **/
 | |
| int i40e_reconfig_rss_queues(struct i40e_pf *pf, int queue_count)
 | |
| {
 | |
| 	if (!(pf->flags & I40E_FLAG_RSS_ENABLED))
 | |
| 		return 0;
 | |
| 
 | |
| 	queue_count = min_t(int, queue_count, pf->rss_size_max);
 | |
| 
 | |
| 	if (queue_count != pf->rss_size) {
 | |
| 		i40e_prep_for_reset(pf);
 | |
| 
 | |
| 		pf->rss_size = queue_count;
 | |
| 
 | |
| 		i40e_reset_and_rebuild(pf, true);
 | |
| 		i40e_config_rss(pf);
 | |
| 	}
 | |
| 	dev_info(&pf->pdev->dev, "RSS count:  %d\n", pf->rss_size);
 | |
| 	return pf->rss_size;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_sw_init - Initialize general software structures (struct i40e_pf)
 | |
|  * @pf: board private structure to initialize
 | |
|  *
 | |
|  * i40e_sw_init initializes the Adapter private data structure.
 | |
|  * Fields are initialized based on PCI device information and
 | |
|  * OS network device settings (MTU size).
 | |
|  **/
 | |
| static int i40e_sw_init(struct i40e_pf *pf)
 | |
| {
 | |
| 	int err = 0;
 | |
| 	int size;
 | |
| 
 | |
| 	pf->msg_enable = netif_msg_init(I40E_DEFAULT_MSG_ENABLE,
 | |
| 				(NETIF_MSG_DRV|NETIF_MSG_PROBE|NETIF_MSG_LINK));
 | |
| 	pf->hw.debug_mask = pf->msg_enable | I40E_DEBUG_DIAG;
 | |
| 	if (debug != -1 && debug != I40E_DEFAULT_MSG_ENABLE) {
 | |
| 		if (I40E_DEBUG_USER & debug)
 | |
| 			pf->hw.debug_mask = debug;
 | |
| 		pf->msg_enable = netif_msg_init((debug & ~I40E_DEBUG_USER),
 | |
| 						I40E_DEFAULT_MSG_ENABLE);
 | |
| 	}
 | |
| 
 | |
| 	/* Set default capability flags */
 | |
| 	pf->flags = I40E_FLAG_RX_CSUM_ENABLED |
 | |
| 		    I40E_FLAG_MSI_ENABLED     |
 | |
| 		    I40E_FLAG_MSIX_ENABLED    |
 | |
| 		    I40E_FLAG_RX_1BUF_ENABLED;
 | |
| 
 | |
| 	/* Set default ITR */
 | |
| 	pf->rx_itr_default = I40E_ITR_DYNAMIC | I40E_ITR_RX_DEF;
 | |
| 	pf->tx_itr_default = I40E_ITR_DYNAMIC | I40E_ITR_TX_DEF;
 | |
| 
 | |
| 	/* Depending on PF configurations, it is possible that the RSS
 | |
| 	 * maximum might end up larger than the available queues
 | |
| 	 */
 | |
| 	pf->rss_size_max = 0x1 << pf->hw.func_caps.rss_table_entry_width;
 | |
| 	pf->rss_size = 1;
 | |
| 	pf->rss_size_max = min_t(int, pf->rss_size_max,
 | |
| 				 pf->hw.func_caps.num_tx_qp);
 | |
| 	if (pf->hw.func_caps.rss) {
 | |
| 		pf->flags |= I40E_FLAG_RSS_ENABLED;
 | |
| 		pf->rss_size = min_t(int, pf->rss_size_max, num_online_cpus());
 | |
| 	}
 | |
| 
 | |
| 	/* MFP mode enabled */
 | |
| 	if (pf->hw.func_caps.npar_enable || pf->hw.func_caps.mfp_mode_1) {
 | |
| 		pf->flags |= I40E_FLAG_MFP_ENABLED;
 | |
| 		dev_info(&pf->pdev->dev, "MFP mode Enabled\n");
 | |
| 	}
 | |
| 
 | |
| 	/* FW/NVM is not yet fixed in this regard */
 | |
| 	if ((pf->hw.func_caps.fd_filters_guaranteed > 0) ||
 | |
| 	    (pf->hw.func_caps.fd_filters_best_effort > 0)) {
 | |
| 		pf->flags |= I40E_FLAG_FD_ATR_ENABLED;
 | |
| 		pf->atr_sample_rate = I40E_DEFAULT_ATR_SAMPLE_RATE;
 | |
| 		/* Setup a counter for fd_atr per pf */
 | |
| 		pf->fd_atr_cnt_idx = I40E_FD_ATR_STAT_IDX(pf->hw.pf_id);
 | |
| 		if (!(pf->flags & I40E_FLAG_MFP_ENABLED)) {
 | |
| 			pf->flags |= I40E_FLAG_FD_SB_ENABLED;
 | |
| 			/* Setup a counter for fd_sb per pf */
 | |
| 			pf->fd_sb_cnt_idx = I40E_FD_SB_STAT_IDX(pf->hw.pf_id);
 | |
| 		} else {
 | |
| 			dev_info(&pf->pdev->dev,
 | |
| 				 "Flow Director Sideband mode Disabled in MFP mode\n");
 | |
| 		}
 | |
| 		pf->fdir_pf_filter_count =
 | |
| 				 pf->hw.func_caps.fd_filters_guaranteed;
 | |
| 		pf->hw.fdir_shared_filter_count =
 | |
| 				 pf->hw.func_caps.fd_filters_best_effort;
 | |
| 	}
 | |
| 
 | |
| 	if (pf->hw.func_caps.vmdq) {
 | |
| 		pf->flags |= I40E_FLAG_VMDQ_ENABLED;
 | |
| 		pf->num_vmdq_vsis = I40E_DEFAULT_NUM_VMDQ_VSI;
 | |
| 		pf->num_vmdq_qps = I40E_DEFAULT_QUEUES_PER_VMDQ;
 | |
| 	}
 | |
| 
 | |
| #ifdef I40E_FCOE
 | |
| 	err = i40e_init_pf_fcoe(pf);
 | |
| 	if (err)
 | |
| 		dev_info(&pf->pdev->dev, "init_pf_fcoe failed: %d\n", err);
 | |
| 
 | |
| #endif /* I40E_FCOE */
 | |
| #ifdef CONFIG_PCI_IOV
 | |
| 	if (pf->hw.func_caps.num_vfs) {
 | |
| 		pf->num_vf_qps = I40E_DEFAULT_QUEUES_PER_VF;
 | |
| 		pf->flags |= I40E_FLAG_SRIOV_ENABLED;
 | |
| 		pf->num_req_vfs = min_t(int,
 | |
| 					pf->hw.func_caps.num_vfs,
 | |
| 					I40E_MAX_VF_COUNT);
 | |
| 	}
 | |
| #endif /* CONFIG_PCI_IOV */
 | |
| 	pf->eeprom_version = 0xDEAD;
 | |
| 	pf->lan_veb = I40E_NO_VEB;
 | |
| 	pf->lan_vsi = I40E_NO_VSI;
 | |
| 
 | |
| 	/* set up queue assignment tracking */
 | |
| 	size = sizeof(struct i40e_lump_tracking)
 | |
| 		+ (sizeof(u16) * pf->hw.func_caps.num_tx_qp);
 | |
| 	pf->qp_pile = kzalloc(size, GFP_KERNEL);
 | |
| 	if (!pf->qp_pile) {
 | |
| 		err = -ENOMEM;
 | |
| 		goto sw_init_done;
 | |
| 	}
 | |
| 	pf->qp_pile->num_entries = pf->hw.func_caps.num_tx_qp;
 | |
| 	pf->qp_pile->search_hint = 0;
 | |
| 
 | |
| 	/* set up vector assignment tracking */
 | |
| 	size = sizeof(struct i40e_lump_tracking)
 | |
| 		+ (sizeof(u16) * pf->hw.func_caps.num_msix_vectors);
 | |
| 	pf->irq_pile = kzalloc(size, GFP_KERNEL);
 | |
| 	if (!pf->irq_pile) {
 | |
| 		kfree(pf->qp_pile);
 | |
| 		err = -ENOMEM;
 | |
| 		goto sw_init_done;
 | |
| 	}
 | |
| 	pf->irq_pile->num_entries = pf->hw.func_caps.num_msix_vectors;
 | |
| 	pf->irq_pile->search_hint = 0;
 | |
| 
 | |
| 	pf->tx_timeout_recovery_level = 1;
 | |
| 
 | |
| 	mutex_init(&pf->switch_mutex);
 | |
| 
 | |
| sw_init_done:
 | |
| 	return err;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_set_ntuple - set the ntuple feature flag and take action
 | |
|  * @pf: board private structure to initialize
 | |
|  * @features: the feature set that the stack is suggesting
 | |
|  *
 | |
|  * returns a bool to indicate if reset needs to happen
 | |
|  **/
 | |
| bool i40e_set_ntuple(struct i40e_pf *pf, netdev_features_t features)
 | |
| {
 | |
| 	bool need_reset = false;
 | |
| 
 | |
| 	/* Check if Flow Director n-tuple support was enabled or disabled.  If
 | |
| 	 * the state changed, we need to reset.
 | |
| 	 */
 | |
| 	if (features & NETIF_F_NTUPLE) {
 | |
| 		/* Enable filters and mark for reset */
 | |
| 		if (!(pf->flags & I40E_FLAG_FD_SB_ENABLED))
 | |
| 			need_reset = true;
 | |
| 		pf->flags |= I40E_FLAG_FD_SB_ENABLED;
 | |
| 	} else {
 | |
| 		/* turn off filters, mark for reset and clear SW filter list */
 | |
| 		if (pf->flags & I40E_FLAG_FD_SB_ENABLED) {
 | |
| 			need_reset = true;
 | |
| 			i40e_fdir_filter_exit(pf);
 | |
| 		}
 | |
| 		pf->flags &= ~I40E_FLAG_FD_SB_ENABLED;
 | |
| 		pf->auto_disable_flags &= ~I40E_FLAG_FD_SB_ENABLED;
 | |
| 		/* if ATR was auto disabled it can be re-enabled. */
 | |
| 		if ((pf->flags & I40E_FLAG_FD_ATR_ENABLED) &&
 | |
| 		    (pf->auto_disable_flags & I40E_FLAG_FD_ATR_ENABLED))
 | |
| 			pf->auto_disable_flags &= ~I40E_FLAG_FD_ATR_ENABLED;
 | |
| 	}
 | |
| 	return need_reset;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_set_features - set the netdev feature flags
 | |
|  * @netdev: ptr to the netdev being adjusted
 | |
|  * @features: the feature set that the stack is suggesting
 | |
|  **/
 | |
| static int i40e_set_features(struct net_device *netdev,
 | |
| 			     netdev_features_t features)
 | |
| {
 | |
| 	struct i40e_netdev_priv *np = netdev_priv(netdev);
 | |
| 	struct i40e_vsi *vsi = np->vsi;
 | |
| 	struct i40e_pf *pf = vsi->back;
 | |
| 	bool need_reset;
 | |
| 
 | |
| 	if (features & NETIF_F_HW_VLAN_CTAG_RX)
 | |
| 		i40e_vlan_stripping_enable(vsi);
 | |
| 	else
 | |
| 		i40e_vlan_stripping_disable(vsi);
 | |
| 
 | |
| 	need_reset = i40e_set_ntuple(pf, features);
 | |
| 
 | |
| 	if (need_reset)
 | |
| 		i40e_do_reset(pf, (1 << __I40E_PF_RESET_REQUESTED));
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| #ifdef CONFIG_I40E_VXLAN
 | |
| /**
 | |
|  * i40e_get_vxlan_port_idx - Lookup a possibly offloaded for Rx UDP port
 | |
|  * @pf: board private structure
 | |
|  * @port: The UDP port to look up
 | |
|  *
 | |
|  * Returns the index number or I40E_MAX_PF_UDP_OFFLOAD_PORTS if port not found
 | |
|  **/
 | |
| static u8 i40e_get_vxlan_port_idx(struct i40e_pf *pf, __be16 port)
 | |
| {
 | |
| 	u8 i;
 | |
| 
 | |
| 	for (i = 0; i < I40E_MAX_PF_UDP_OFFLOAD_PORTS; i++) {
 | |
| 		if (pf->vxlan_ports[i] == port)
 | |
| 			return i;
 | |
| 	}
 | |
| 
 | |
| 	return i;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_add_vxlan_port - Get notifications about VXLAN ports that come up
 | |
|  * @netdev: This physical port's netdev
 | |
|  * @sa_family: Socket Family that VXLAN is notifying us about
 | |
|  * @port: New UDP port number that VXLAN started listening to
 | |
|  **/
 | |
| static void i40e_add_vxlan_port(struct net_device *netdev,
 | |
| 				sa_family_t sa_family, __be16 port)
 | |
| {
 | |
| 	struct i40e_netdev_priv *np = netdev_priv(netdev);
 | |
| 	struct i40e_vsi *vsi = np->vsi;
 | |
| 	struct i40e_pf *pf = vsi->back;
 | |
| 	u8 next_idx;
 | |
| 	u8 idx;
 | |
| 
 | |
| 	if (sa_family == AF_INET6)
 | |
| 		return;
 | |
| 
 | |
| 	idx = i40e_get_vxlan_port_idx(pf, port);
 | |
| 
 | |
| 	/* Check if port already exists */
 | |
| 	if (idx < I40E_MAX_PF_UDP_OFFLOAD_PORTS) {
 | |
| 		netdev_info(netdev, "Port %d already offloaded\n", ntohs(port));
 | |
| 		return;
 | |
| 	}
 | |
| 
 | |
| 	/* Now check if there is space to add the new port */
 | |
| 	next_idx = i40e_get_vxlan_port_idx(pf, 0);
 | |
| 
 | |
| 	if (next_idx == I40E_MAX_PF_UDP_OFFLOAD_PORTS) {
 | |
| 		netdev_info(netdev, "Maximum number of UDP ports reached, not adding port %d\n",
 | |
| 			    ntohs(port));
 | |
| 		return;
 | |
| 	}
 | |
| 
 | |
| 	/* New port: add it and mark its index in the bitmap */
 | |
| 	pf->vxlan_ports[next_idx] = port;
 | |
| 	pf->pending_vxlan_bitmap |= (1 << next_idx);
 | |
| 
 | |
| 	pf->flags |= I40E_FLAG_VXLAN_FILTER_SYNC;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_del_vxlan_port - Get notifications about VXLAN ports that go away
 | |
|  * @netdev: This physical port's netdev
 | |
|  * @sa_family: Socket Family that VXLAN is notifying us about
 | |
|  * @port: UDP port number that VXLAN stopped listening to
 | |
|  **/
 | |
| static void i40e_del_vxlan_port(struct net_device *netdev,
 | |
| 				sa_family_t sa_family, __be16 port)
 | |
| {
 | |
| 	struct i40e_netdev_priv *np = netdev_priv(netdev);
 | |
| 	struct i40e_vsi *vsi = np->vsi;
 | |
| 	struct i40e_pf *pf = vsi->back;
 | |
| 	u8 idx;
 | |
| 
 | |
| 	if (sa_family == AF_INET6)
 | |
| 		return;
 | |
| 
 | |
| 	idx = i40e_get_vxlan_port_idx(pf, port);
 | |
| 
 | |
| 	/* Check if port already exists */
 | |
| 	if (idx < I40E_MAX_PF_UDP_OFFLOAD_PORTS) {
 | |
| 		/* if port exists, set it to 0 (mark for deletion)
 | |
| 		 * and make it pending
 | |
| 		 */
 | |
| 		pf->vxlan_ports[idx] = 0;
 | |
| 
 | |
| 		pf->pending_vxlan_bitmap |= (1 << idx);
 | |
| 
 | |
| 		pf->flags |= I40E_FLAG_VXLAN_FILTER_SYNC;
 | |
| 	} else {
 | |
| 		netdev_warn(netdev, "Port %d was not found, not deleting\n",
 | |
| 			    ntohs(port));
 | |
| 	}
 | |
| }
 | |
| 
 | |
| #endif
 | |
| static int i40e_get_phys_port_id(struct net_device *netdev,
 | |
| 				 struct netdev_phys_port_id *ppid)
 | |
| {
 | |
| 	struct i40e_netdev_priv *np = netdev_priv(netdev);
 | |
| 	struct i40e_pf *pf = np->vsi->back;
 | |
| 	struct i40e_hw *hw = &pf->hw;
 | |
| 
 | |
| 	if (!(pf->flags & I40E_FLAG_PORT_ID_VALID))
 | |
| 		return -EOPNOTSUPP;
 | |
| 
 | |
| 	ppid->id_len = min_t(int, sizeof(hw->mac.port_addr), sizeof(ppid->id));
 | |
| 	memcpy(ppid->id, hw->mac.port_addr, ppid->id_len);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| #ifdef HAVE_FDB_OPS
 | |
| #ifdef USE_CONST_DEV_UC_CHAR
 | |
| static int i40e_ndo_fdb_add(struct ndmsg *ndm, struct nlattr *tb[],
 | |
| 			    struct net_device *dev,
 | |
| 			    const unsigned char *addr,
 | |
| 			    u16 flags)
 | |
| #else
 | |
| static int i40e_ndo_fdb_add(struct ndmsg *ndm,
 | |
| 			    struct net_device *dev,
 | |
| 			    unsigned char *addr,
 | |
| 			    u16 flags)
 | |
| #endif
 | |
| {
 | |
| 	struct i40e_netdev_priv *np = netdev_priv(dev);
 | |
| 	struct i40e_pf *pf = np->vsi->back;
 | |
| 	int err = 0;
 | |
| 
 | |
| 	if (!(pf->flags & I40E_FLAG_SRIOV_ENABLED))
 | |
| 		return -EOPNOTSUPP;
 | |
| 
 | |
| 	/* Hardware does not support aging addresses so if a
 | |
| 	 * ndm_state is given only allow permanent addresses
 | |
| 	 */
 | |
| 	if (ndm->ndm_state && !(ndm->ndm_state & NUD_PERMANENT)) {
 | |
| 		netdev_info(dev, "FDB only supports static addresses\n");
 | |
| 		return -EINVAL;
 | |
| 	}
 | |
| 
 | |
| 	if (is_unicast_ether_addr(addr) || is_link_local_ether_addr(addr))
 | |
| 		err = dev_uc_add_excl(dev, addr);
 | |
| 	else if (is_multicast_ether_addr(addr))
 | |
| 		err = dev_mc_add_excl(dev, addr);
 | |
| 	else
 | |
| 		err = -EINVAL;
 | |
| 
 | |
| 	/* Only return duplicate errors if NLM_F_EXCL is set */
 | |
| 	if (err == -EEXIST && !(flags & NLM_F_EXCL))
 | |
| 		err = 0;
 | |
| 
 | |
| 	return err;
 | |
| }
 | |
| 
 | |
| #ifndef USE_DEFAULT_FDB_DEL_DUMP
 | |
| #ifdef USE_CONST_DEV_UC_CHAR
 | |
| static int i40e_ndo_fdb_del(struct ndmsg *ndm,
 | |
| 			    struct net_device *dev,
 | |
| 			    const unsigned char *addr)
 | |
| #else
 | |
| static int i40e_ndo_fdb_del(struct ndmsg *ndm,
 | |
| 			    struct net_device *dev,
 | |
| 			    unsigned char *addr)
 | |
| #endif
 | |
| {
 | |
| 	struct i40e_netdev_priv *np = netdev_priv(dev);
 | |
| 	struct i40e_pf *pf = np->vsi->back;
 | |
| 	int err = -EOPNOTSUPP;
 | |
| 
 | |
| 	if (ndm->ndm_state & NUD_PERMANENT) {
 | |
| 		netdev_info(dev, "FDB only supports static addresses\n");
 | |
| 		return -EINVAL;
 | |
| 	}
 | |
| 
 | |
| 	if (pf->flags & I40E_FLAG_SRIOV_ENABLED) {
 | |
| 		if (is_unicast_ether_addr(addr))
 | |
| 			err = dev_uc_del(dev, addr);
 | |
| 		else if (is_multicast_ether_addr(addr))
 | |
| 			err = dev_mc_del(dev, addr);
 | |
| 		else
 | |
| 			err = -EINVAL;
 | |
| 	}
 | |
| 
 | |
| 	return err;
 | |
| }
 | |
| 
 | |
| static int i40e_ndo_fdb_dump(struct sk_buff *skb,
 | |
| 			     struct netlink_callback *cb,
 | |
| 			     struct net_device *dev,
 | |
| 			     struct net_device *filter_dev,
 | |
| 			     int idx)
 | |
| {
 | |
| 	struct i40e_netdev_priv *np = netdev_priv(dev);
 | |
| 	struct i40e_pf *pf = np->vsi->back;
 | |
| 
 | |
| 	if (pf->flags & I40E_FLAG_SRIOV_ENABLED)
 | |
| 		idx = ndo_dflt_fdb_dump(skb, cb, dev, filter_dev, idx);
 | |
| 
 | |
| 	return idx;
 | |
| }
 | |
| 
 | |
| #endif /* USE_DEFAULT_FDB_DEL_DUMP */
 | |
| #endif /* HAVE_FDB_OPS */
 | |
| static const struct net_device_ops i40e_netdev_ops = {
 | |
| 	.ndo_open		= i40e_open,
 | |
| 	.ndo_stop		= i40e_close,
 | |
| 	.ndo_start_xmit		= i40e_lan_xmit_frame,
 | |
| 	.ndo_get_stats64	= i40e_get_netdev_stats_struct,
 | |
| 	.ndo_set_rx_mode	= i40e_set_rx_mode,
 | |
| 	.ndo_validate_addr	= eth_validate_addr,
 | |
| 	.ndo_set_mac_address	= i40e_set_mac,
 | |
| 	.ndo_change_mtu		= i40e_change_mtu,
 | |
| 	.ndo_do_ioctl		= i40e_ioctl,
 | |
| 	.ndo_tx_timeout		= i40e_tx_timeout,
 | |
| 	.ndo_vlan_rx_add_vid	= i40e_vlan_rx_add_vid,
 | |
| 	.ndo_vlan_rx_kill_vid	= i40e_vlan_rx_kill_vid,
 | |
| #ifdef CONFIG_NET_POLL_CONTROLLER
 | |
| 	.ndo_poll_controller	= i40e_netpoll,
 | |
| #endif
 | |
| 	.ndo_setup_tc		= i40e_setup_tc,
 | |
| #ifdef I40E_FCOE
 | |
| 	.ndo_fcoe_enable	= i40e_fcoe_enable,
 | |
| 	.ndo_fcoe_disable	= i40e_fcoe_disable,
 | |
| #endif
 | |
| 	.ndo_set_features	= i40e_set_features,
 | |
| 	.ndo_set_vf_mac		= i40e_ndo_set_vf_mac,
 | |
| 	.ndo_set_vf_vlan	= i40e_ndo_set_vf_port_vlan,
 | |
| 	.ndo_set_vf_rate	= i40e_ndo_set_vf_bw,
 | |
| 	.ndo_get_vf_config	= i40e_ndo_get_vf_config,
 | |
| 	.ndo_set_vf_link_state	= i40e_ndo_set_vf_link_state,
 | |
| 	.ndo_set_vf_spoofchk	= i40e_ndo_set_vf_spoofck,
 | |
| #ifdef CONFIG_I40E_VXLAN
 | |
| 	.ndo_add_vxlan_port	= i40e_add_vxlan_port,
 | |
| 	.ndo_del_vxlan_port	= i40e_del_vxlan_port,
 | |
| #endif
 | |
| 	.ndo_get_phys_port_id	= i40e_get_phys_port_id,
 | |
| #ifdef HAVE_FDB_OPS
 | |
| 	.ndo_fdb_add		= i40e_ndo_fdb_add,
 | |
| #ifndef USE_DEFAULT_FDB_DEL_DUMP
 | |
| 	.ndo_fdb_del		= i40e_ndo_fdb_del,
 | |
| 	.ndo_fdb_dump		= i40e_ndo_fdb_dump,
 | |
| #endif
 | |
| #endif
 | |
| };
 | |
| 
 | |
| /**
 | |
|  * i40e_config_netdev - Setup the netdev flags
 | |
|  * @vsi: the VSI being configured
 | |
|  *
 | |
|  * Returns 0 on success, negative value on failure
 | |
|  **/
 | |
| static int i40e_config_netdev(struct i40e_vsi *vsi)
 | |
| {
 | |
| 	u8 brdcast[ETH_ALEN] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff};
 | |
| 	struct i40e_pf *pf = vsi->back;
 | |
| 	struct i40e_hw *hw = &pf->hw;
 | |
| 	struct i40e_netdev_priv *np;
 | |
| 	struct net_device *netdev;
 | |
| 	u8 mac_addr[ETH_ALEN];
 | |
| 	int etherdev_size;
 | |
| 
 | |
| 	etherdev_size = sizeof(struct i40e_netdev_priv);
 | |
| 	netdev = alloc_etherdev_mq(etherdev_size, vsi->alloc_queue_pairs);
 | |
| 	if (!netdev)
 | |
| 		return -ENOMEM;
 | |
| 
 | |
| 	vsi->netdev = netdev;
 | |
| 	np = netdev_priv(netdev);
 | |
| 	np->vsi = vsi;
 | |
| 
 | |
| 	netdev->hw_enc_features |= NETIF_F_IP_CSUM	 |
 | |
| 				  NETIF_F_GSO_UDP_TUNNEL |
 | |
| 				  NETIF_F_TSO;
 | |
| 
 | |
| 	netdev->features = NETIF_F_SG		       |
 | |
| 			   NETIF_F_IP_CSUM	       |
 | |
| 			   NETIF_F_SCTP_CSUM	       |
 | |
| 			   NETIF_F_HIGHDMA	       |
 | |
| 			   NETIF_F_GSO_UDP_TUNNEL      |
 | |
| 			   NETIF_F_HW_VLAN_CTAG_TX     |
 | |
| 			   NETIF_F_HW_VLAN_CTAG_RX     |
 | |
| 			   NETIF_F_HW_VLAN_CTAG_FILTER |
 | |
| 			   NETIF_F_IPV6_CSUM	       |
 | |
| 			   NETIF_F_TSO		       |
 | |
| 			   NETIF_F_TSO_ECN	       |
 | |
| 			   NETIF_F_TSO6		       |
 | |
| 			   NETIF_F_RXCSUM	       |
 | |
| 			   NETIF_F_RXHASH	       |
 | |
| 			   0;
 | |
| 
 | |
| 	if (!(pf->flags & I40E_FLAG_MFP_ENABLED))
 | |
| 		netdev->features |= NETIF_F_NTUPLE;
 | |
| 
 | |
| 	/* copy netdev features into list of user selectable features */
 | |
| 	netdev->hw_features |= netdev->features;
 | |
| 
 | |
| 	if (vsi->type == I40E_VSI_MAIN) {
 | |
| 		SET_NETDEV_DEV(netdev, &pf->pdev->dev);
 | |
| 		ether_addr_copy(mac_addr, hw->mac.perm_addr);
 | |
| 		/* The following two steps are necessary to prevent reception
 | |
| 		 * of tagged packets - by default the NVM loads a MAC-VLAN
 | |
| 		 * filter that will accept any tagged packet.  This is to
 | |
| 		 * prevent that during normal operations until a specific
 | |
| 		 * VLAN tag filter has been set.
 | |
| 		 */
 | |
| 		i40e_rm_default_mac_filter(vsi, mac_addr);
 | |
| 		i40e_add_filter(vsi, mac_addr, I40E_VLAN_ANY, false, true);
 | |
| 	} else {
 | |
| 		/* relate the VSI_VMDQ name to the VSI_MAIN name */
 | |
| 		snprintf(netdev->name, IFNAMSIZ, "%sv%%d",
 | |
| 			 pf->vsi[pf->lan_vsi]->netdev->name);
 | |
| 		random_ether_addr(mac_addr);
 | |
| 		i40e_add_filter(vsi, mac_addr, I40E_VLAN_ANY, false, false);
 | |
| 	}
 | |
| 	i40e_add_filter(vsi, brdcast, I40E_VLAN_ANY, false, false);
 | |
| 
 | |
| 	ether_addr_copy(netdev->dev_addr, mac_addr);
 | |
| 	ether_addr_copy(netdev->perm_addr, mac_addr);
 | |
| 	/* vlan gets same features (except vlan offload)
 | |
| 	 * after any tweaks for specific VSI types
 | |
| 	 */
 | |
| 	netdev->vlan_features = netdev->features & ~(NETIF_F_HW_VLAN_CTAG_TX |
 | |
| 						     NETIF_F_HW_VLAN_CTAG_RX |
 | |
| 						   NETIF_F_HW_VLAN_CTAG_FILTER);
 | |
| 	netdev->priv_flags |= IFF_UNICAST_FLT;
 | |
| 	netdev->priv_flags |= IFF_SUPP_NOFCS;
 | |
| 	/* Setup netdev TC information */
 | |
| 	i40e_vsi_config_netdev_tc(vsi, vsi->tc_config.enabled_tc);
 | |
| 
 | |
| 	netdev->netdev_ops = &i40e_netdev_ops;
 | |
| 	netdev->watchdog_timeo = 5 * HZ;
 | |
| 	i40e_set_ethtool_ops(netdev);
 | |
| #ifdef I40E_FCOE
 | |
| 	i40e_fcoe_config_netdev(netdev, vsi);
 | |
| #endif
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_vsi_delete - Delete a VSI from the switch
 | |
|  * @vsi: the VSI being removed
 | |
|  *
 | |
|  * Returns 0 on success, negative value on failure
 | |
|  **/
 | |
| static void i40e_vsi_delete(struct i40e_vsi *vsi)
 | |
| {
 | |
| 	/* remove default VSI is not allowed */
 | |
| 	if (vsi == vsi->back->vsi[vsi->back->lan_vsi])
 | |
| 		return;
 | |
| 
 | |
| 	i40e_aq_delete_element(&vsi->back->hw, vsi->seid, NULL);
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_add_vsi - Add a VSI to the switch
 | |
|  * @vsi: the VSI being configured
 | |
|  *
 | |
|  * This initializes a VSI context depending on the VSI type to be added and
 | |
|  * passes it down to the add_vsi aq command.
 | |
|  **/
 | |
| static int i40e_add_vsi(struct i40e_vsi *vsi)
 | |
| {
 | |
| 	int ret = -ENODEV;
 | |
| 	struct i40e_mac_filter *f, *ftmp;
 | |
| 	struct i40e_pf *pf = vsi->back;
 | |
| 	struct i40e_hw *hw = &pf->hw;
 | |
| 	struct i40e_vsi_context ctxt;
 | |
| 	u8 enabled_tc = 0x1; /* TC0 enabled */
 | |
| 	int f_count = 0;
 | |
| 
 | |
| 	memset(&ctxt, 0, sizeof(ctxt));
 | |
| 	switch (vsi->type) {
 | |
| 	case I40E_VSI_MAIN:
 | |
| 		/* The PF's main VSI is already setup as part of the
 | |
| 		 * device initialization, so we'll not bother with
 | |
| 		 * the add_vsi call, but we will retrieve the current
 | |
| 		 * VSI context.
 | |
| 		 */
 | |
| 		ctxt.seid = pf->main_vsi_seid;
 | |
| 		ctxt.pf_num = pf->hw.pf_id;
 | |
| 		ctxt.vf_num = 0;
 | |
| 		ret = i40e_aq_get_vsi_params(&pf->hw, &ctxt, NULL);
 | |
| 		ctxt.flags = I40E_AQ_VSI_TYPE_PF;
 | |
| 		if (ret) {
 | |
| 			dev_info(&pf->pdev->dev,
 | |
| 				 "couldn't get pf vsi config, err %d, aq_err %d\n",
 | |
| 				 ret, pf->hw.aq.asq_last_status);
 | |
| 			return -ENOENT;
 | |
| 		}
 | |
| 		memcpy(&vsi->info, &ctxt.info, sizeof(ctxt.info));
 | |
| 		vsi->info.valid_sections = 0;
 | |
| 
 | |
| 		vsi->seid = ctxt.seid;
 | |
| 		vsi->id = ctxt.vsi_number;
 | |
| 
 | |
| 		enabled_tc = i40e_pf_get_tc_map(pf);
 | |
| 
 | |
| 		/* MFP mode setup queue map and update VSI */
 | |
| 		if (pf->flags & I40E_FLAG_MFP_ENABLED) {
 | |
| 			memset(&ctxt, 0, sizeof(ctxt));
 | |
| 			ctxt.seid = pf->main_vsi_seid;
 | |
| 			ctxt.pf_num = pf->hw.pf_id;
 | |
| 			ctxt.vf_num = 0;
 | |
| 			i40e_vsi_setup_queue_map(vsi, &ctxt, enabled_tc, false);
 | |
| 			ret = i40e_aq_update_vsi_params(hw, &ctxt, NULL);
 | |
| 			if (ret) {
 | |
| 				dev_info(&pf->pdev->dev,
 | |
| 					 "update vsi failed, aq_err=%d\n",
 | |
| 					 pf->hw.aq.asq_last_status);
 | |
| 				ret = -ENOENT;
 | |
| 				goto err;
 | |
| 			}
 | |
| 			/* update the local VSI info queue map */
 | |
| 			i40e_vsi_update_queue_map(vsi, &ctxt);
 | |
| 			vsi->info.valid_sections = 0;
 | |
| 		} else {
 | |
| 			/* Default/Main VSI is only enabled for TC0
 | |
| 			 * reconfigure it to enable all TCs that are
 | |
| 			 * available on the port in SFP mode.
 | |
| 			 */
 | |
| 			ret = i40e_vsi_config_tc(vsi, enabled_tc);
 | |
| 			if (ret) {
 | |
| 				dev_info(&pf->pdev->dev,
 | |
| 					 "failed to configure TCs for main VSI tc_map 0x%08x, err %d, aq_err %d\n",
 | |
| 					 enabled_tc, ret,
 | |
| 					 pf->hw.aq.asq_last_status);
 | |
| 				ret = -ENOENT;
 | |
| 			}
 | |
| 		}
 | |
| 		break;
 | |
| 
 | |
| 	case I40E_VSI_FDIR:
 | |
| 		ctxt.pf_num = hw->pf_id;
 | |
| 		ctxt.vf_num = 0;
 | |
| 		ctxt.uplink_seid = vsi->uplink_seid;
 | |
| 		ctxt.connection_type = 0x1;     /* regular data port */
 | |
| 		ctxt.flags = I40E_AQ_VSI_TYPE_PF;
 | |
| 		i40e_vsi_setup_queue_map(vsi, &ctxt, enabled_tc, true);
 | |
| 		break;
 | |
| 
 | |
| 	case I40E_VSI_VMDQ2:
 | |
| 		ctxt.pf_num = hw->pf_id;
 | |
| 		ctxt.vf_num = 0;
 | |
| 		ctxt.uplink_seid = vsi->uplink_seid;
 | |
| 		ctxt.connection_type = 0x1;     /* regular data port */
 | |
| 		ctxt.flags = I40E_AQ_VSI_TYPE_VMDQ2;
 | |
| 
 | |
| 		ctxt.info.valid_sections |= cpu_to_le16(I40E_AQ_VSI_PROP_SWITCH_VALID);
 | |
| 
 | |
| 		/* This VSI is connected to VEB so the switch_id
 | |
| 		 * should be set to zero by default.
 | |
| 		 */
 | |
| 		ctxt.info.switch_id = 0;
 | |
| 		ctxt.info.switch_id |= cpu_to_le16(I40E_AQ_VSI_SW_ID_FLAG_ALLOW_LB);
 | |
| 
 | |
| 		/* Setup the VSI tx/rx queue map for TC0 only for now */
 | |
| 		i40e_vsi_setup_queue_map(vsi, &ctxt, enabled_tc, true);
 | |
| 		break;
 | |
| 
 | |
| 	case I40E_VSI_SRIOV:
 | |
| 		ctxt.pf_num = hw->pf_id;
 | |
| 		ctxt.vf_num = vsi->vf_id + hw->func_caps.vf_base_id;
 | |
| 		ctxt.uplink_seid = vsi->uplink_seid;
 | |
| 		ctxt.connection_type = 0x1;     /* regular data port */
 | |
| 		ctxt.flags = I40E_AQ_VSI_TYPE_VF;
 | |
| 
 | |
| 		ctxt.info.valid_sections |= cpu_to_le16(I40E_AQ_VSI_PROP_SWITCH_VALID);
 | |
| 
 | |
| 		/* This VSI is connected to VEB so the switch_id
 | |
| 		 * should be set to zero by default.
 | |
| 		 */
 | |
| 		ctxt.info.switch_id = cpu_to_le16(I40E_AQ_VSI_SW_ID_FLAG_ALLOW_LB);
 | |
| 
 | |
| 		ctxt.info.valid_sections |= cpu_to_le16(I40E_AQ_VSI_PROP_VLAN_VALID);
 | |
| 		ctxt.info.port_vlan_flags |= I40E_AQ_VSI_PVLAN_MODE_ALL;
 | |
| 		if (pf->vf[vsi->vf_id].spoofchk) {
 | |
| 			ctxt.info.valid_sections |=
 | |
| 				cpu_to_le16(I40E_AQ_VSI_PROP_SECURITY_VALID);
 | |
| 			ctxt.info.sec_flags |=
 | |
| 				(I40E_AQ_VSI_SEC_FLAG_ENABLE_VLAN_CHK |
 | |
| 				 I40E_AQ_VSI_SEC_FLAG_ENABLE_MAC_CHK);
 | |
| 		}
 | |
| 		/* Setup the VSI tx/rx queue map for TC0 only for now */
 | |
| 		i40e_vsi_setup_queue_map(vsi, &ctxt, enabled_tc, true);
 | |
| 		break;
 | |
| 
 | |
| #ifdef I40E_FCOE
 | |
| 	case I40E_VSI_FCOE:
 | |
| 		ret = i40e_fcoe_vsi_init(vsi, &ctxt);
 | |
| 		if (ret) {
 | |
| 			dev_info(&pf->pdev->dev, "failed to initialize FCoE VSI\n");
 | |
| 			return ret;
 | |
| 		}
 | |
| 		break;
 | |
| 
 | |
| #endif /* I40E_FCOE */
 | |
| 	default:
 | |
| 		return -ENODEV;
 | |
| 	}
 | |
| 
 | |
| 	if (vsi->type != I40E_VSI_MAIN) {
 | |
| 		ret = i40e_aq_add_vsi(hw, &ctxt, NULL);
 | |
| 		if (ret) {
 | |
| 			dev_info(&vsi->back->pdev->dev,
 | |
| 				 "add vsi failed, aq_err=%d\n",
 | |
| 				 vsi->back->hw.aq.asq_last_status);
 | |
| 			ret = -ENOENT;
 | |
| 			goto err;
 | |
| 		}
 | |
| 		memcpy(&vsi->info, &ctxt.info, sizeof(ctxt.info));
 | |
| 		vsi->info.valid_sections = 0;
 | |
| 		vsi->seid = ctxt.seid;
 | |
| 		vsi->id = ctxt.vsi_number;
 | |
| 	}
 | |
| 
 | |
| 	/* If macvlan filters already exist, force them to get loaded */
 | |
| 	list_for_each_entry_safe(f, ftmp, &vsi->mac_filter_list, list) {
 | |
| 		f->changed = true;
 | |
| 		f_count++;
 | |
| 
 | |
| 		if (f->is_laa && vsi->type == I40E_VSI_MAIN) {
 | |
| 			i40e_aq_mac_address_write(&vsi->back->hw,
 | |
| 						  I40E_AQC_WRITE_TYPE_LAA_WOL,
 | |
| 						  f->macaddr, NULL);
 | |
| 		}
 | |
| 	}
 | |
| 	if (f_count) {
 | |
| 		vsi->flags |= I40E_VSI_FLAG_FILTER_CHANGED;
 | |
| 		pf->flags |= I40E_FLAG_FILTER_SYNC;
 | |
| 	}
 | |
| 
 | |
| 	/* Update VSI BW information */
 | |
| 	ret = i40e_vsi_get_bw_info(vsi);
 | |
| 	if (ret) {
 | |
| 		dev_info(&pf->pdev->dev,
 | |
| 			 "couldn't get vsi bw info, err %d, aq_err %d\n",
 | |
| 			 ret, pf->hw.aq.asq_last_status);
 | |
| 		/* VSI is already added so not tearing that up */
 | |
| 		ret = 0;
 | |
| 	}
 | |
| 
 | |
| err:
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_vsi_release - Delete a VSI and free its resources
 | |
|  * @vsi: the VSI being removed
 | |
|  *
 | |
|  * Returns 0 on success or < 0 on error
 | |
|  **/
 | |
| int i40e_vsi_release(struct i40e_vsi *vsi)
 | |
| {
 | |
| 	struct i40e_mac_filter *f, *ftmp;
 | |
| 	struct i40e_veb *veb = NULL;
 | |
| 	struct i40e_pf *pf;
 | |
| 	u16 uplink_seid;
 | |
| 	int i, n;
 | |
| 
 | |
| 	pf = vsi->back;
 | |
| 
 | |
| 	/* release of a VEB-owner or last VSI is not allowed */
 | |
| 	if (vsi->flags & I40E_VSI_FLAG_VEB_OWNER) {
 | |
| 		dev_info(&pf->pdev->dev, "VSI %d has existing VEB %d\n",
 | |
| 			 vsi->seid, vsi->uplink_seid);
 | |
| 		return -ENODEV;
 | |
| 	}
 | |
| 	if (vsi == pf->vsi[pf->lan_vsi] &&
 | |
| 	    !test_bit(__I40E_DOWN, &pf->state)) {
 | |
| 		dev_info(&pf->pdev->dev, "Can't remove PF VSI\n");
 | |
| 		return -ENODEV;
 | |
| 	}
 | |
| 
 | |
| 	uplink_seid = vsi->uplink_seid;
 | |
| 	if (vsi->type != I40E_VSI_SRIOV) {
 | |
| 		if (vsi->netdev_registered) {
 | |
| 			vsi->netdev_registered = false;
 | |
| 			if (vsi->netdev) {
 | |
| 				/* results in a call to i40e_close() */
 | |
| 				unregister_netdev(vsi->netdev);
 | |
| 			}
 | |
| 		} else {
 | |
| 			i40e_vsi_close(vsi);
 | |
| 		}
 | |
| 		i40e_vsi_disable_irq(vsi);
 | |
| 	}
 | |
| 
 | |
| 	list_for_each_entry_safe(f, ftmp, &vsi->mac_filter_list, list)
 | |
| 		i40e_del_filter(vsi, f->macaddr, f->vlan,
 | |
| 				f->is_vf, f->is_netdev);
 | |
| 	i40e_sync_vsi_filters(vsi);
 | |
| 
 | |
| 	i40e_vsi_delete(vsi);
 | |
| 	i40e_vsi_free_q_vectors(vsi);
 | |
| 	if (vsi->netdev) {
 | |
| 		free_netdev(vsi->netdev);
 | |
| 		vsi->netdev = NULL;
 | |
| 	}
 | |
| 	i40e_vsi_clear_rings(vsi);
 | |
| 	i40e_vsi_clear(vsi);
 | |
| 
 | |
| 	/* If this was the last thing on the VEB, except for the
 | |
| 	 * controlling VSI, remove the VEB, which puts the controlling
 | |
| 	 * VSI onto the next level down in the switch.
 | |
| 	 *
 | |
| 	 * Well, okay, there's one more exception here: don't remove
 | |
| 	 * the orphan VEBs yet.  We'll wait for an explicit remove request
 | |
| 	 * from up the network stack.
 | |
| 	 */
 | |
| 	for (n = 0, i = 0; i < pf->num_alloc_vsi; i++) {
 | |
| 		if (pf->vsi[i] &&
 | |
| 		    pf->vsi[i]->uplink_seid == uplink_seid &&
 | |
| 		    (pf->vsi[i]->flags & I40E_VSI_FLAG_VEB_OWNER) == 0) {
 | |
| 			n++;      /* count the VSIs */
 | |
| 		}
 | |
| 	}
 | |
| 	for (i = 0; i < I40E_MAX_VEB; i++) {
 | |
| 		if (!pf->veb[i])
 | |
| 			continue;
 | |
| 		if (pf->veb[i]->uplink_seid == uplink_seid)
 | |
| 			n++;     /* count the VEBs */
 | |
| 		if (pf->veb[i]->seid == uplink_seid)
 | |
| 			veb = pf->veb[i];
 | |
| 	}
 | |
| 	if (n == 0 && veb && veb->uplink_seid != 0)
 | |
| 		i40e_veb_release(veb);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_vsi_setup_vectors - Set up the q_vectors for the given VSI
 | |
|  * @vsi: ptr to the VSI
 | |
|  *
 | |
|  * This should only be called after i40e_vsi_mem_alloc() which allocates the
 | |
|  * corresponding SW VSI structure and initializes num_queue_pairs for the
 | |
|  * newly allocated VSI.
 | |
|  *
 | |
|  * Returns 0 on success or negative on failure
 | |
|  **/
 | |
| static int i40e_vsi_setup_vectors(struct i40e_vsi *vsi)
 | |
| {
 | |
| 	int ret = -ENOENT;
 | |
| 	struct i40e_pf *pf = vsi->back;
 | |
| 
 | |
| 	if (vsi->q_vectors[0]) {
 | |
| 		dev_info(&pf->pdev->dev, "VSI %d has existing q_vectors\n",
 | |
| 			 vsi->seid);
 | |
| 		return -EEXIST;
 | |
| 	}
 | |
| 
 | |
| 	if (vsi->base_vector) {
 | |
| 		dev_info(&pf->pdev->dev, "VSI %d has non-zero base vector %d\n",
 | |
| 			 vsi->seid, vsi->base_vector);
 | |
| 		return -EEXIST;
 | |
| 	}
 | |
| 
 | |
| 	ret = i40e_vsi_alloc_q_vectors(vsi);
 | |
| 	if (ret) {
 | |
| 		dev_info(&pf->pdev->dev,
 | |
| 			 "failed to allocate %d q_vector for VSI %d, ret=%d\n",
 | |
| 			 vsi->num_q_vectors, vsi->seid, ret);
 | |
| 		vsi->num_q_vectors = 0;
 | |
| 		goto vector_setup_out;
 | |
| 	}
 | |
| 
 | |
| 	if (vsi->num_q_vectors)
 | |
| 		vsi->base_vector = i40e_get_lump(pf, pf->irq_pile,
 | |
| 						 vsi->num_q_vectors, vsi->idx);
 | |
| 	if (vsi->base_vector < 0) {
 | |
| 		dev_info(&pf->pdev->dev,
 | |
| 			 "failed to get queue tracking for VSI %d, err=%d\n",
 | |
| 			 vsi->seid, vsi->base_vector);
 | |
| 		i40e_vsi_free_q_vectors(vsi);
 | |
| 		ret = -ENOENT;
 | |
| 		goto vector_setup_out;
 | |
| 	}
 | |
| 
 | |
| vector_setup_out:
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_vsi_reinit_setup - return and reallocate resources for a VSI
 | |
|  * @vsi: pointer to the vsi.
 | |
|  *
 | |
|  * This re-allocates a vsi's queue resources.
 | |
|  *
 | |
|  * Returns pointer to the successfully allocated and configured VSI sw struct
 | |
|  * on success, otherwise returns NULL on failure.
 | |
|  **/
 | |
| static struct i40e_vsi *i40e_vsi_reinit_setup(struct i40e_vsi *vsi)
 | |
| {
 | |
| 	struct i40e_pf *pf = vsi->back;
 | |
| 	u8 enabled_tc;
 | |
| 	int ret;
 | |
| 
 | |
| 	i40e_put_lump(pf->qp_pile, vsi->base_queue, vsi->idx);
 | |
| 	i40e_vsi_clear_rings(vsi);
 | |
| 
 | |
| 	i40e_vsi_free_arrays(vsi, false);
 | |
| 	i40e_set_num_rings_in_vsi(vsi);
 | |
| 	ret = i40e_vsi_alloc_arrays(vsi, false);
 | |
| 	if (ret)
 | |
| 		goto err_vsi;
 | |
| 
 | |
| 	ret = i40e_get_lump(pf, pf->qp_pile, vsi->alloc_queue_pairs, vsi->idx);
 | |
| 	if (ret < 0) {
 | |
| 		dev_info(&pf->pdev->dev, "VSI %d get_lump failed %d\n",
 | |
| 			 vsi->seid, ret);
 | |
| 		goto err_vsi;
 | |
| 	}
 | |
| 	vsi->base_queue = ret;
 | |
| 
 | |
| 	/* Update the FW view of the VSI. Force a reset of TC and queue
 | |
| 	 * layout configurations.
 | |
| 	 */
 | |
| 	enabled_tc = pf->vsi[pf->lan_vsi]->tc_config.enabled_tc;
 | |
| 	pf->vsi[pf->lan_vsi]->tc_config.enabled_tc = 0;
 | |
| 	pf->vsi[pf->lan_vsi]->seid = pf->main_vsi_seid;
 | |
| 	i40e_vsi_config_tc(pf->vsi[pf->lan_vsi], enabled_tc);
 | |
| 
 | |
| 	/* assign it some queues */
 | |
| 	ret = i40e_alloc_rings(vsi);
 | |
| 	if (ret)
 | |
| 		goto err_rings;
 | |
| 
 | |
| 	/* map all of the rings to the q_vectors */
 | |
| 	i40e_vsi_map_rings_to_vectors(vsi);
 | |
| 	return vsi;
 | |
| 
 | |
| err_rings:
 | |
| 	i40e_vsi_free_q_vectors(vsi);
 | |
| 	if (vsi->netdev_registered) {
 | |
| 		vsi->netdev_registered = false;
 | |
| 		unregister_netdev(vsi->netdev);
 | |
| 		free_netdev(vsi->netdev);
 | |
| 		vsi->netdev = NULL;
 | |
| 	}
 | |
| 	i40e_aq_delete_element(&pf->hw, vsi->seid, NULL);
 | |
| err_vsi:
 | |
| 	i40e_vsi_clear(vsi);
 | |
| 	return NULL;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_vsi_setup - Set up a VSI by a given type
 | |
|  * @pf: board private structure
 | |
|  * @type: VSI type
 | |
|  * @uplink_seid: the switch element to link to
 | |
|  * @param1: usage depends upon VSI type. For VF types, indicates VF id
 | |
|  *
 | |
|  * This allocates the sw VSI structure and its queue resources, then add a VSI
 | |
|  * to the identified VEB.
 | |
|  *
 | |
|  * Returns pointer to the successfully allocated and configure VSI sw struct on
 | |
|  * success, otherwise returns NULL on failure.
 | |
|  **/
 | |
| struct i40e_vsi *i40e_vsi_setup(struct i40e_pf *pf, u8 type,
 | |
| 				u16 uplink_seid, u32 param1)
 | |
| {
 | |
| 	struct i40e_vsi *vsi = NULL;
 | |
| 	struct i40e_veb *veb = NULL;
 | |
| 	int ret, i;
 | |
| 	int v_idx;
 | |
| 
 | |
| 	/* The requested uplink_seid must be either
 | |
| 	 *     - the PF's port seid
 | |
| 	 *              no VEB is needed because this is the PF
 | |
| 	 *              or this is a Flow Director special case VSI
 | |
| 	 *     - seid of an existing VEB
 | |
| 	 *     - seid of a VSI that owns an existing VEB
 | |
| 	 *     - seid of a VSI that doesn't own a VEB
 | |
| 	 *              a new VEB is created and the VSI becomes the owner
 | |
| 	 *     - seid of the PF VSI, which is what creates the first VEB
 | |
| 	 *              this is a special case of the previous
 | |
| 	 *
 | |
| 	 * Find which uplink_seid we were given and create a new VEB if needed
 | |
| 	 */
 | |
| 	for (i = 0; i < I40E_MAX_VEB; i++) {
 | |
| 		if (pf->veb[i] && pf->veb[i]->seid == uplink_seid) {
 | |
| 			veb = pf->veb[i];
 | |
| 			break;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	if (!veb && uplink_seid != pf->mac_seid) {
 | |
| 
 | |
| 		for (i = 0; i < pf->num_alloc_vsi; i++) {
 | |
| 			if (pf->vsi[i] && pf->vsi[i]->seid == uplink_seid) {
 | |
| 				vsi = pf->vsi[i];
 | |
| 				break;
 | |
| 			}
 | |
| 		}
 | |
| 		if (!vsi) {
 | |
| 			dev_info(&pf->pdev->dev, "no such uplink_seid %d\n",
 | |
| 				 uplink_seid);
 | |
| 			return NULL;
 | |
| 		}
 | |
| 
 | |
| 		if (vsi->uplink_seid == pf->mac_seid)
 | |
| 			veb = i40e_veb_setup(pf, 0, pf->mac_seid, vsi->seid,
 | |
| 					     vsi->tc_config.enabled_tc);
 | |
| 		else if ((vsi->flags & I40E_VSI_FLAG_VEB_OWNER) == 0)
 | |
| 			veb = i40e_veb_setup(pf, 0, vsi->uplink_seid, vsi->seid,
 | |
| 					     vsi->tc_config.enabled_tc);
 | |
| 
 | |
| 		for (i = 0; i < I40E_MAX_VEB && !veb; i++) {
 | |
| 			if (pf->veb[i] && pf->veb[i]->seid == vsi->uplink_seid)
 | |
| 				veb = pf->veb[i];
 | |
| 		}
 | |
| 		if (!veb) {
 | |
| 			dev_info(&pf->pdev->dev, "couldn't add VEB\n");
 | |
| 			return NULL;
 | |
| 		}
 | |
| 
 | |
| 		vsi->flags |= I40E_VSI_FLAG_VEB_OWNER;
 | |
| 		uplink_seid = veb->seid;
 | |
| 	}
 | |
| 
 | |
| 	/* get vsi sw struct */
 | |
| 	v_idx = i40e_vsi_mem_alloc(pf, type);
 | |
| 	if (v_idx < 0)
 | |
| 		goto err_alloc;
 | |
| 	vsi = pf->vsi[v_idx];
 | |
| 	if (!vsi)
 | |
| 		goto err_alloc;
 | |
| 	vsi->type = type;
 | |
| 	vsi->veb_idx = (veb ? veb->idx : I40E_NO_VEB);
 | |
| 
 | |
| 	if (type == I40E_VSI_MAIN)
 | |
| 		pf->lan_vsi = v_idx;
 | |
| 	else if (type == I40E_VSI_SRIOV)
 | |
| 		vsi->vf_id = param1;
 | |
| 	/* assign it some queues */
 | |
| 	ret = i40e_get_lump(pf, pf->qp_pile, vsi->alloc_queue_pairs,
 | |
| 				vsi->idx);
 | |
| 	if (ret < 0) {
 | |
| 		dev_info(&pf->pdev->dev, "VSI %d get_lump failed %d\n",
 | |
| 			 vsi->seid, ret);
 | |
| 		goto err_vsi;
 | |
| 	}
 | |
| 	vsi->base_queue = ret;
 | |
| 
 | |
| 	/* get a VSI from the hardware */
 | |
| 	vsi->uplink_seid = uplink_seid;
 | |
| 	ret = i40e_add_vsi(vsi);
 | |
| 	if (ret)
 | |
| 		goto err_vsi;
 | |
| 
 | |
| 	switch (vsi->type) {
 | |
| 	/* setup the netdev if needed */
 | |
| 	case I40E_VSI_MAIN:
 | |
| 	case I40E_VSI_VMDQ2:
 | |
| 	case I40E_VSI_FCOE:
 | |
| 		ret = i40e_config_netdev(vsi);
 | |
| 		if (ret)
 | |
| 			goto err_netdev;
 | |
| 		ret = register_netdev(vsi->netdev);
 | |
| 		if (ret)
 | |
| 			goto err_netdev;
 | |
| 		vsi->netdev_registered = true;
 | |
| 		netif_carrier_off(vsi->netdev);
 | |
| #ifdef CONFIG_I40E_DCB
 | |
| 		/* Setup DCB netlink interface */
 | |
| 		i40e_dcbnl_setup(vsi);
 | |
| #endif /* CONFIG_I40E_DCB */
 | |
| 		/* fall through */
 | |
| 
 | |
| 	case I40E_VSI_FDIR:
 | |
| 		/* set up vectors and rings if needed */
 | |
| 		ret = i40e_vsi_setup_vectors(vsi);
 | |
| 		if (ret)
 | |
| 			goto err_msix;
 | |
| 
 | |
| 		ret = i40e_alloc_rings(vsi);
 | |
| 		if (ret)
 | |
| 			goto err_rings;
 | |
| 
 | |
| 		/* map all of the rings to the q_vectors */
 | |
| 		i40e_vsi_map_rings_to_vectors(vsi);
 | |
| 
 | |
| 		i40e_vsi_reset_stats(vsi);
 | |
| 		break;
 | |
| 
 | |
| 	default:
 | |
| 		/* no netdev or rings for the other VSI types */
 | |
| 		break;
 | |
| 	}
 | |
| 
 | |
| 	return vsi;
 | |
| 
 | |
| err_rings:
 | |
| 	i40e_vsi_free_q_vectors(vsi);
 | |
| err_msix:
 | |
| 	if (vsi->netdev_registered) {
 | |
| 		vsi->netdev_registered = false;
 | |
| 		unregister_netdev(vsi->netdev);
 | |
| 		free_netdev(vsi->netdev);
 | |
| 		vsi->netdev = NULL;
 | |
| 	}
 | |
| err_netdev:
 | |
| 	i40e_aq_delete_element(&pf->hw, vsi->seid, NULL);
 | |
| err_vsi:
 | |
| 	i40e_vsi_clear(vsi);
 | |
| err_alloc:
 | |
| 	return NULL;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_veb_get_bw_info - Query VEB BW information
 | |
|  * @veb: the veb to query
 | |
|  *
 | |
|  * Query the Tx scheduler BW configuration data for given VEB
 | |
|  **/
 | |
| static int i40e_veb_get_bw_info(struct i40e_veb *veb)
 | |
| {
 | |
| 	struct i40e_aqc_query_switching_comp_ets_config_resp ets_data;
 | |
| 	struct i40e_aqc_query_switching_comp_bw_config_resp bw_data;
 | |
| 	struct i40e_pf *pf = veb->pf;
 | |
| 	struct i40e_hw *hw = &pf->hw;
 | |
| 	u32 tc_bw_max;
 | |
| 	int ret = 0;
 | |
| 	int i;
 | |
| 
 | |
| 	ret = i40e_aq_query_switch_comp_bw_config(hw, veb->seid,
 | |
| 						  &bw_data, NULL);
 | |
| 	if (ret) {
 | |
| 		dev_info(&pf->pdev->dev,
 | |
| 			 "query veb bw config failed, aq_err=%d\n",
 | |
| 			 hw->aq.asq_last_status);
 | |
| 		goto out;
 | |
| 	}
 | |
| 
 | |
| 	ret = i40e_aq_query_switch_comp_ets_config(hw, veb->seid,
 | |
| 						   &ets_data, NULL);
 | |
| 	if (ret) {
 | |
| 		dev_info(&pf->pdev->dev,
 | |
| 			 "query veb bw ets config failed, aq_err=%d\n",
 | |
| 			 hw->aq.asq_last_status);
 | |
| 		goto out;
 | |
| 	}
 | |
| 
 | |
| 	veb->bw_limit = le16_to_cpu(ets_data.port_bw_limit);
 | |
| 	veb->bw_max_quanta = ets_data.tc_bw_max;
 | |
| 	veb->is_abs_credits = bw_data.absolute_credits_enable;
 | |
| 	tc_bw_max = le16_to_cpu(bw_data.tc_bw_max[0]) |
 | |
| 		    (le16_to_cpu(bw_data.tc_bw_max[1]) << 16);
 | |
| 	for (i = 0; i < I40E_MAX_TRAFFIC_CLASS; i++) {
 | |
| 		veb->bw_tc_share_credits[i] = bw_data.tc_bw_share_credits[i];
 | |
| 		veb->bw_tc_limit_credits[i] =
 | |
| 					le16_to_cpu(bw_data.tc_bw_limits[i]);
 | |
| 		veb->bw_tc_max_quanta[i] = ((tc_bw_max >> (i*4)) & 0x7);
 | |
| 	}
 | |
| 
 | |
| out:
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_veb_mem_alloc - Allocates the next available struct veb in the PF
 | |
|  * @pf: board private structure
 | |
|  *
 | |
|  * On error: returns error code (negative)
 | |
|  * On success: returns vsi index in PF (positive)
 | |
|  **/
 | |
| static int i40e_veb_mem_alloc(struct i40e_pf *pf)
 | |
| {
 | |
| 	int ret = -ENOENT;
 | |
| 	struct i40e_veb *veb;
 | |
| 	int i;
 | |
| 
 | |
| 	/* Need to protect the allocation of switch elements at the PF level */
 | |
| 	mutex_lock(&pf->switch_mutex);
 | |
| 
 | |
| 	/* VEB list may be fragmented if VEB creation/destruction has
 | |
| 	 * been happening.  We can afford to do a quick scan to look
 | |
| 	 * for any free slots in the list.
 | |
| 	 *
 | |
| 	 * find next empty veb slot, looping back around if necessary
 | |
| 	 */
 | |
| 	i = 0;
 | |
| 	while ((i < I40E_MAX_VEB) && (pf->veb[i] != NULL))
 | |
| 		i++;
 | |
| 	if (i >= I40E_MAX_VEB) {
 | |
| 		ret = -ENOMEM;
 | |
| 		goto err_alloc_veb;  /* out of VEB slots! */
 | |
| 	}
 | |
| 
 | |
| 	veb = kzalloc(sizeof(*veb), GFP_KERNEL);
 | |
| 	if (!veb) {
 | |
| 		ret = -ENOMEM;
 | |
| 		goto err_alloc_veb;
 | |
| 	}
 | |
| 	veb->pf = pf;
 | |
| 	veb->idx = i;
 | |
| 	veb->enabled_tc = 1;
 | |
| 
 | |
| 	pf->veb[i] = veb;
 | |
| 	ret = i;
 | |
| err_alloc_veb:
 | |
| 	mutex_unlock(&pf->switch_mutex);
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_switch_branch_release - Delete a branch of the switch tree
 | |
|  * @branch: where to start deleting
 | |
|  *
 | |
|  * This uses recursion to find the tips of the branch to be
 | |
|  * removed, deleting until we get back to and can delete this VEB.
 | |
|  **/
 | |
| static void i40e_switch_branch_release(struct i40e_veb *branch)
 | |
| {
 | |
| 	struct i40e_pf *pf = branch->pf;
 | |
| 	u16 branch_seid = branch->seid;
 | |
| 	u16 veb_idx = branch->idx;
 | |
| 	int i;
 | |
| 
 | |
| 	/* release any VEBs on this VEB - RECURSION */
 | |
| 	for (i = 0; i < I40E_MAX_VEB; i++) {
 | |
| 		if (!pf->veb[i])
 | |
| 			continue;
 | |
| 		if (pf->veb[i]->uplink_seid == branch->seid)
 | |
| 			i40e_switch_branch_release(pf->veb[i]);
 | |
| 	}
 | |
| 
 | |
| 	/* Release the VSIs on this VEB, but not the owner VSI.
 | |
| 	 *
 | |
| 	 * NOTE: Removing the last VSI on a VEB has the SIDE EFFECT of removing
 | |
| 	 *       the VEB itself, so don't use (*branch) after this loop.
 | |
| 	 */
 | |
| 	for (i = 0; i < pf->num_alloc_vsi; i++) {
 | |
| 		if (!pf->vsi[i])
 | |
| 			continue;
 | |
| 		if (pf->vsi[i]->uplink_seid == branch_seid &&
 | |
| 		   (pf->vsi[i]->flags & I40E_VSI_FLAG_VEB_OWNER) == 0) {
 | |
| 			i40e_vsi_release(pf->vsi[i]);
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	/* There's one corner case where the VEB might not have been
 | |
| 	 * removed, so double check it here and remove it if needed.
 | |
| 	 * This case happens if the veb was created from the debugfs
 | |
| 	 * commands and no VSIs were added to it.
 | |
| 	 */
 | |
| 	if (pf->veb[veb_idx])
 | |
| 		i40e_veb_release(pf->veb[veb_idx]);
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_veb_clear - remove veb struct
 | |
|  * @veb: the veb to remove
 | |
|  **/
 | |
| static void i40e_veb_clear(struct i40e_veb *veb)
 | |
| {
 | |
| 	if (!veb)
 | |
| 		return;
 | |
| 
 | |
| 	if (veb->pf) {
 | |
| 		struct i40e_pf *pf = veb->pf;
 | |
| 
 | |
| 		mutex_lock(&pf->switch_mutex);
 | |
| 		if (pf->veb[veb->idx] == veb)
 | |
| 			pf->veb[veb->idx] = NULL;
 | |
| 		mutex_unlock(&pf->switch_mutex);
 | |
| 	}
 | |
| 
 | |
| 	kfree(veb);
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_veb_release - Delete a VEB and free its resources
 | |
|  * @veb: the VEB being removed
 | |
|  **/
 | |
| void i40e_veb_release(struct i40e_veb *veb)
 | |
| {
 | |
| 	struct i40e_vsi *vsi = NULL;
 | |
| 	struct i40e_pf *pf;
 | |
| 	int i, n = 0;
 | |
| 
 | |
| 	pf = veb->pf;
 | |
| 
 | |
| 	/* find the remaining VSI and check for extras */
 | |
| 	for (i = 0; i < pf->num_alloc_vsi; i++) {
 | |
| 		if (pf->vsi[i] && pf->vsi[i]->uplink_seid == veb->seid) {
 | |
| 			n++;
 | |
| 			vsi = pf->vsi[i];
 | |
| 		}
 | |
| 	}
 | |
| 	if (n != 1) {
 | |
| 		dev_info(&pf->pdev->dev,
 | |
| 			 "can't remove VEB %d with %d VSIs left\n",
 | |
| 			 veb->seid, n);
 | |
| 		return;
 | |
| 	}
 | |
| 
 | |
| 	/* move the remaining VSI to uplink veb */
 | |
| 	vsi->flags &= ~I40E_VSI_FLAG_VEB_OWNER;
 | |
| 	if (veb->uplink_seid) {
 | |
| 		vsi->uplink_seid = veb->uplink_seid;
 | |
| 		if (veb->uplink_seid == pf->mac_seid)
 | |
| 			vsi->veb_idx = I40E_NO_VEB;
 | |
| 		else
 | |
| 			vsi->veb_idx = veb->veb_idx;
 | |
| 	} else {
 | |
| 		/* floating VEB */
 | |
| 		vsi->uplink_seid = pf->vsi[pf->lan_vsi]->uplink_seid;
 | |
| 		vsi->veb_idx = pf->vsi[pf->lan_vsi]->veb_idx;
 | |
| 	}
 | |
| 
 | |
| 	i40e_aq_delete_element(&pf->hw, veb->seid, NULL);
 | |
| 	i40e_veb_clear(veb);
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_add_veb - create the VEB in the switch
 | |
|  * @veb: the VEB to be instantiated
 | |
|  * @vsi: the controlling VSI
 | |
|  **/
 | |
| static int i40e_add_veb(struct i40e_veb *veb, struct i40e_vsi *vsi)
 | |
| {
 | |
| 	bool is_default = false;
 | |
| 	bool is_cloud = false;
 | |
| 	int ret;
 | |
| 
 | |
| 	/* get a VEB from the hardware */
 | |
| 	ret = i40e_aq_add_veb(&veb->pf->hw, veb->uplink_seid, vsi->seid,
 | |
| 			      veb->enabled_tc, is_default,
 | |
| 			      is_cloud, &veb->seid, NULL);
 | |
| 	if (ret) {
 | |
| 		dev_info(&veb->pf->pdev->dev,
 | |
| 			 "couldn't add VEB, err %d, aq_err %d\n",
 | |
| 			 ret, veb->pf->hw.aq.asq_last_status);
 | |
| 		return -EPERM;
 | |
| 	}
 | |
| 
 | |
| 	/* get statistics counter */
 | |
| 	ret = i40e_aq_get_veb_parameters(&veb->pf->hw, veb->seid, NULL, NULL,
 | |
| 					 &veb->stats_idx, NULL, NULL, NULL);
 | |
| 	if (ret) {
 | |
| 		dev_info(&veb->pf->pdev->dev,
 | |
| 			 "couldn't get VEB statistics idx, err %d, aq_err %d\n",
 | |
| 			 ret, veb->pf->hw.aq.asq_last_status);
 | |
| 		return -EPERM;
 | |
| 	}
 | |
| 	ret = i40e_veb_get_bw_info(veb);
 | |
| 	if (ret) {
 | |
| 		dev_info(&veb->pf->pdev->dev,
 | |
| 			 "couldn't get VEB bw info, err %d, aq_err %d\n",
 | |
| 			 ret, veb->pf->hw.aq.asq_last_status);
 | |
| 		i40e_aq_delete_element(&veb->pf->hw, veb->seid, NULL);
 | |
| 		return -ENOENT;
 | |
| 	}
 | |
| 
 | |
| 	vsi->uplink_seid = veb->seid;
 | |
| 	vsi->veb_idx = veb->idx;
 | |
| 	vsi->flags |= I40E_VSI_FLAG_VEB_OWNER;
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_veb_setup - Set up a VEB
 | |
|  * @pf: board private structure
 | |
|  * @flags: VEB setup flags
 | |
|  * @uplink_seid: the switch element to link to
 | |
|  * @vsi_seid: the initial VSI seid
 | |
|  * @enabled_tc: Enabled TC bit-map
 | |
|  *
 | |
|  * This allocates the sw VEB structure and links it into the switch
 | |
|  * It is possible and legal for this to be a duplicate of an already
 | |
|  * existing VEB.  It is also possible for both uplink and vsi seids
 | |
|  * to be zero, in order to create a floating VEB.
 | |
|  *
 | |
|  * Returns pointer to the successfully allocated VEB sw struct on
 | |
|  * success, otherwise returns NULL on failure.
 | |
|  **/
 | |
| struct i40e_veb *i40e_veb_setup(struct i40e_pf *pf, u16 flags,
 | |
| 				u16 uplink_seid, u16 vsi_seid,
 | |
| 				u8 enabled_tc)
 | |
| {
 | |
| 	struct i40e_veb *veb, *uplink_veb = NULL;
 | |
| 	int vsi_idx, veb_idx;
 | |
| 	int ret;
 | |
| 
 | |
| 	/* if one seid is 0, the other must be 0 to create a floating relay */
 | |
| 	if ((uplink_seid == 0 || vsi_seid == 0) &&
 | |
| 	    (uplink_seid + vsi_seid != 0)) {
 | |
| 		dev_info(&pf->pdev->dev,
 | |
| 			 "one, not both seid's are 0: uplink=%d vsi=%d\n",
 | |
| 			 uplink_seid, vsi_seid);
 | |
| 		return NULL;
 | |
| 	}
 | |
| 
 | |
| 	/* make sure there is such a vsi and uplink */
 | |
| 	for (vsi_idx = 0; vsi_idx < pf->num_alloc_vsi; vsi_idx++)
 | |
| 		if (pf->vsi[vsi_idx] && pf->vsi[vsi_idx]->seid == vsi_seid)
 | |
| 			break;
 | |
| 	if (vsi_idx >= pf->num_alloc_vsi && vsi_seid != 0) {
 | |
| 		dev_info(&pf->pdev->dev, "vsi seid %d not found\n",
 | |
| 			 vsi_seid);
 | |
| 		return NULL;
 | |
| 	}
 | |
| 
 | |
| 	if (uplink_seid && uplink_seid != pf->mac_seid) {
 | |
| 		for (veb_idx = 0; veb_idx < I40E_MAX_VEB; veb_idx++) {
 | |
| 			if (pf->veb[veb_idx] &&
 | |
| 			    pf->veb[veb_idx]->seid == uplink_seid) {
 | |
| 				uplink_veb = pf->veb[veb_idx];
 | |
| 				break;
 | |
| 			}
 | |
| 		}
 | |
| 		if (!uplink_veb) {
 | |
| 			dev_info(&pf->pdev->dev,
 | |
| 				 "uplink seid %d not found\n", uplink_seid);
 | |
| 			return NULL;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	/* get veb sw struct */
 | |
| 	veb_idx = i40e_veb_mem_alloc(pf);
 | |
| 	if (veb_idx < 0)
 | |
| 		goto err_alloc;
 | |
| 	veb = pf->veb[veb_idx];
 | |
| 	veb->flags = flags;
 | |
| 	veb->uplink_seid = uplink_seid;
 | |
| 	veb->veb_idx = (uplink_veb ? uplink_veb->idx : I40E_NO_VEB);
 | |
| 	veb->enabled_tc = (enabled_tc ? enabled_tc : 0x1);
 | |
| 
 | |
| 	/* create the VEB in the switch */
 | |
| 	ret = i40e_add_veb(veb, pf->vsi[vsi_idx]);
 | |
| 	if (ret)
 | |
| 		goto err_veb;
 | |
| 	if (vsi_idx == pf->lan_vsi)
 | |
| 		pf->lan_veb = veb->idx;
 | |
| 
 | |
| 	return veb;
 | |
| 
 | |
| err_veb:
 | |
| 	i40e_veb_clear(veb);
 | |
| err_alloc:
 | |
| 	return NULL;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_setup_pf_switch_element - set pf vars based on switch type
 | |
|  * @pf: board private structure
 | |
|  * @ele: element we are building info from
 | |
|  * @num_reported: total number of elements
 | |
|  * @printconfig: should we print the contents
 | |
|  *
 | |
|  * helper function to assist in extracting a few useful SEID values.
 | |
|  **/
 | |
| static void i40e_setup_pf_switch_element(struct i40e_pf *pf,
 | |
| 				struct i40e_aqc_switch_config_element_resp *ele,
 | |
| 				u16 num_reported, bool printconfig)
 | |
| {
 | |
| 	u16 downlink_seid = le16_to_cpu(ele->downlink_seid);
 | |
| 	u16 uplink_seid = le16_to_cpu(ele->uplink_seid);
 | |
| 	u8 element_type = ele->element_type;
 | |
| 	u16 seid = le16_to_cpu(ele->seid);
 | |
| 
 | |
| 	if (printconfig)
 | |
| 		dev_info(&pf->pdev->dev,
 | |
| 			 "type=%d seid=%d uplink=%d downlink=%d\n",
 | |
| 			 element_type, seid, uplink_seid, downlink_seid);
 | |
| 
 | |
| 	switch (element_type) {
 | |
| 	case I40E_SWITCH_ELEMENT_TYPE_MAC:
 | |
| 		pf->mac_seid = seid;
 | |
| 		break;
 | |
| 	case I40E_SWITCH_ELEMENT_TYPE_VEB:
 | |
| 		/* Main VEB? */
 | |
| 		if (uplink_seid != pf->mac_seid)
 | |
| 			break;
 | |
| 		if (pf->lan_veb == I40E_NO_VEB) {
 | |
| 			int v;
 | |
| 
 | |
| 			/* find existing or else empty VEB */
 | |
| 			for (v = 0; v < I40E_MAX_VEB; v++) {
 | |
| 				if (pf->veb[v] && (pf->veb[v]->seid == seid)) {
 | |
| 					pf->lan_veb = v;
 | |
| 					break;
 | |
| 				}
 | |
| 			}
 | |
| 			if (pf->lan_veb == I40E_NO_VEB) {
 | |
| 				v = i40e_veb_mem_alloc(pf);
 | |
| 				if (v < 0)
 | |
| 					break;
 | |
| 				pf->lan_veb = v;
 | |
| 			}
 | |
| 		}
 | |
| 
 | |
| 		pf->veb[pf->lan_veb]->seid = seid;
 | |
| 		pf->veb[pf->lan_veb]->uplink_seid = pf->mac_seid;
 | |
| 		pf->veb[pf->lan_veb]->pf = pf;
 | |
| 		pf->veb[pf->lan_veb]->veb_idx = I40E_NO_VEB;
 | |
| 		break;
 | |
| 	case I40E_SWITCH_ELEMENT_TYPE_VSI:
 | |
| 		if (num_reported != 1)
 | |
| 			break;
 | |
| 		/* This is immediately after a reset so we can assume this is
 | |
| 		 * the PF's VSI
 | |
| 		 */
 | |
| 		pf->mac_seid = uplink_seid;
 | |
| 		pf->pf_seid = downlink_seid;
 | |
| 		pf->main_vsi_seid = seid;
 | |
| 		if (printconfig)
 | |
| 			dev_info(&pf->pdev->dev,
 | |
| 				 "pf_seid=%d main_vsi_seid=%d\n",
 | |
| 				 pf->pf_seid, pf->main_vsi_seid);
 | |
| 		break;
 | |
| 	case I40E_SWITCH_ELEMENT_TYPE_PF:
 | |
| 	case I40E_SWITCH_ELEMENT_TYPE_VF:
 | |
| 	case I40E_SWITCH_ELEMENT_TYPE_EMP:
 | |
| 	case I40E_SWITCH_ELEMENT_TYPE_BMC:
 | |
| 	case I40E_SWITCH_ELEMENT_TYPE_PE:
 | |
| 	case I40E_SWITCH_ELEMENT_TYPE_PA:
 | |
| 		/* ignore these for now */
 | |
| 		break;
 | |
| 	default:
 | |
| 		dev_info(&pf->pdev->dev, "unknown element type=%d seid=%d\n",
 | |
| 			 element_type, seid);
 | |
| 		break;
 | |
| 	}
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_fetch_switch_configuration - Get switch config from firmware
 | |
|  * @pf: board private structure
 | |
|  * @printconfig: should we print the contents
 | |
|  *
 | |
|  * Get the current switch configuration from the device and
 | |
|  * extract a few useful SEID values.
 | |
|  **/
 | |
| int i40e_fetch_switch_configuration(struct i40e_pf *pf, bool printconfig)
 | |
| {
 | |
| 	struct i40e_aqc_get_switch_config_resp *sw_config;
 | |
| 	u16 next_seid = 0;
 | |
| 	int ret = 0;
 | |
| 	u8 *aq_buf;
 | |
| 	int i;
 | |
| 
 | |
| 	aq_buf = kzalloc(I40E_AQ_LARGE_BUF, GFP_KERNEL);
 | |
| 	if (!aq_buf)
 | |
| 		return -ENOMEM;
 | |
| 
 | |
| 	sw_config = (struct i40e_aqc_get_switch_config_resp *)aq_buf;
 | |
| 	do {
 | |
| 		u16 num_reported, num_total;
 | |
| 
 | |
| 		ret = i40e_aq_get_switch_config(&pf->hw, sw_config,
 | |
| 						I40E_AQ_LARGE_BUF,
 | |
| 						&next_seid, NULL);
 | |
| 		if (ret) {
 | |
| 			dev_info(&pf->pdev->dev,
 | |
| 				 "get switch config failed %d aq_err=%x\n",
 | |
| 				 ret, pf->hw.aq.asq_last_status);
 | |
| 			kfree(aq_buf);
 | |
| 			return -ENOENT;
 | |
| 		}
 | |
| 
 | |
| 		num_reported = le16_to_cpu(sw_config->header.num_reported);
 | |
| 		num_total = le16_to_cpu(sw_config->header.num_total);
 | |
| 
 | |
| 		if (printconfig)
 | |
| 			dev_info(&pf->pdev->dev,
 | |
| 				 "header: %d reported %d total\n",
 | |
| 				 num_reported, num_total);
 | |
| 
 | |
| 		for (i = 0; i < num_reported; i++) {
 | |
| 			struct i40e_aqc_switch_config_element_resp *ele =
 | |
| 				&sw_config->element[i];
 | |
| 
 | |
| 			i40e_setup_pf_switch_element(pf, ele, num_reported,
 | |
| 						     printconfig);
 | |
| 		}
 | |
| 	} while (next_seid != 0);
 | |
| 
 | |
| 	kfree(aq_buf);
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_setup_pf_switch - Setup the HW switch on startup or after reset
 | |
|  * @pf: board private structure
 | |
|  * @reinit: if the Main VSI needs to re-initialized.
 | |
|  *
 | |
|  * Returns 0 on success, negative value on failure
 | |
|  **/
 | |
| static int i40e_setup_pf_switch(struct i40e_pf *pf, bool reinit)
 | |
| {
 | |
| 	int ret;
 | |
| 
 | |
| 	/* find out what's out there already */
 | |
| 	ret = i40e_fetch_switch_configuration(pf, false);
 | |
| 	if (ret) {
 | |
| 		dev_info(&pf->pdev->dev,
 | |
| 			 "couldn't fetch switch config, err %d, aq_err %d\n",
 | |
| 			 ret, pf->hw.aq.asq_last_status);
 | |
| 		return ret;
 | |
| 	}
 | |
| 	i40e_pf_reset_stats(pf);
 | |
| 
 | |
| 	/* first time setup */
 | |
| 	if (pf->lan_vsi == I40E_NO_VSI || reinit) {
 | |
| 		struct i40e_vsi *vsi = NULL;
 | |
| 		u16 uplink_seid;
 | |
| 
 | |
| 		/* Set up the PF VSI associated with the PF's main VSI
 | |
| 		 * that is already in the HW switch
 | |
| 		 */
 | |
| 		if (pf->lan_veb != I40E_NO_VEB && pf->veb[pf->lan_veb])
 | |
| 			uplink_seid = pf->veb[pf->lan_veb]->seid;
 | |
| 		else
 | |
| 			uplink_seid = pf->mac_seid;
 | |
| 		if (pf->lan_vsi == I40E_NO_VSI)
 | |
| 			vsi = i40e_vsi_setup(pf, I40E_VSI_MAIN, uplink_seid, 0);
 | |
| 		else if (reinit)
 | |
| 			vsi = i40e_vsi_reinit_setup(pf->vsi[pf->lan_vsi]);
 | |
| 		if (!vsi) {
 | |
| 			dev_info(&pf->pdev->dev, "setup of MAIN VSI failed\n");
 | |
| 			i40e_fdir_teardown(pf);
 | |
| 			return -EAGAIN;
 | |
| 		}
 | |
| 	} else {
 | |
| 		/* force a reset of TC and queue layout configurations */
 | |
| 		u8 enabled_tc = pf->vsi[pf->lan_vsi]->tc_config.enabled_tc;
 | |
| 		pf->vsi[pf->lan_vsi]->tc_config.enabled_tc = 0;
 | |
| 		pf->vsi[pf->lan_vsi]->seid = pf->main_vsi_seid;
 | |
| 		i40e_vsi_config_tc(pf->vsi[pf->lan_vsi], enabled_tc);
 | |
| 	}
 | |
| 	i40e_vlan_stripping_disable(pf->vsi[pf->lan_vsi]);
 | |
| 
 | |
| 	i40e_fdir_sb_setup(pf);
 | |
| 
 | |
| 	/* Setup static PF queue filter control settings */
 | |
| 	ret = i40e_setup_pf_filter_control(pf);
 | |
| 	if (ret) {
 | |
| 		dev_info(&pf->pdev->dev, "setup_pf_filter_control failed: %d\n",
 | |
| 			 ret);
 | |
| 		/* Failure here should not stop continuing other steps */
 | |
| 	}
 | |
| 
 | |
| 	/* enable RSS in the HW, even for only one queue, as the stack can use
 | |
| 	 * the hash
 | |
| 	 */
 | |
| 	if ((pf->flags & I40E_FLAG_RSS_ENABLED))
 | |
| 		i40e_config_rss(pf);
 | |
| 
 | |
| 	/* fill in link information and enable LSE reporting */
 | |
| 	i40e_update_link_info(&pf->hw, true);
 | |
| 	i40e_link_event(pf);
 | |
| 
 | |
| 	/* Initialize user-specific link properties */
 | |
| 	pf->fc_autoneg_status = ((pf->hw.phy.link_info.an_info &
 | |
| 				  I40E_AQ_AN_COMPLETED) ? true : false);
 | |
| 
 | |
| 	i40e_ptp_init(pf);
 | |
| 
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_determine_queue_usage - Work out queue distribution
 | |
|  * @pf: board private structure
 | |
|  **/
 | |
| static void i40e_determine_queue_usage(struct i40e_pf *pf)
 | |
| {
 | |
| 	int queues_left;
 | |
| 
 | |
| 	pf->num_lan_qps = 0;
 | |
| #ifdef I40E_FCOE
 | |
| 	pf->num_fcoe_qps = 0;
 | |
| #endif
 | |
| 
 | |
| 	/* Find the max queues to be put into basic use.  We'll always be
 | |
| 	 * using TC0, whether or not DCB is running, and TC0 will get the
 | |
| 	 * big RSS set.
 | |
| 	 */
 | |
| 	queues_left = pf->hw.func_caps.num_tx_qp;
 | |
| 
 | |
| 	if ((queues_left == 1) ||
 | |
| 	    !(pf->flags & I40E_FLAG_MSIX_ENABLED)) {
 | |
| 		/* one qp for PF, no queues for anything else */
 | |
| 		queues_left = 0;
 | |
| 		pf->rss_size = pf->num_lan_qps = 1;
 | |
| 
 | |
| 		/* make sure all the fancies are disabled */
 | |
| 		pf->flags &= ~(I40E_FLAG_RSS_ENABLED	|
 | |
| #ifdef I40E_FCOE
 | |
| 			       I40E_FLAG_FCOE_ENABLED	|
 | |
| #endif
 | |
| 			       I40E_FLAG_FD_SB_ENABLED	|
 | |
| 			       I40E_FLAG_FD_ATR_ENABLED	|
 | |
| 			       I40E_FLAG_DCB_CAPABLE	|
 | |
| 			       I40E_FLAG_SRIOV_ENABLED	|
 | |
| 			       I40E_FLAG_VMDQ_ENABLED);
 | |
| 	} else if (!(pf->flags & (I40E_FLAG_RSS_ENABLED |
 | |
| 				  I40E_FLAG_FD_SB_ENABLED |
 | |
| 				  I40E_FLAG_FD_ATR_ENABLED |
 | |
| 				  I40E_FLAG_DCB_CAPABLE))) {
 | |
| 		/* one qp for PF */
 | |
| 		pf->rss_size = pf->num_lan_qps = 1;
 | |
| 		queues_left -= pf->num_lan_qps;
 | |
| 
 | |
| 		pf->flags &= ~(I40E_FLAG_RSS_ENABLED	|
 | |
| #ifdef I40E_FCOE
 | |
| 			       I40E_FLAG_FCOE_ENABLED	|
 | |
| #endif
 | |
| 			       I40E_FLAG_FD_SB_ENABLED	|
 | |
| 			       I40E_FLAG_FD_ATR_ENABLED	|
 | |
| 			       I40E_FLAG_DCB_ENABLED	|
 | |
| 			       I40E_FLAG_VMDQ_ENABLED);
 | |
| 	} else {
 | |
| 		/* Not enough queues for all TCs */
 | |
| 		if ((pf->flags & I40E_FLAG_DCB_CAPABLE) &&
 | |
| 		    (queues_left < I40E_MAX_TRAFFIC_CLASS)) {
 | |
| 			pf->flags &= ~I40E_FLAG_DCB_CAPABLE;
 | |
| 			dev_info(&pf->pdev->dev, "not enough queues for DCB. DCB is disabled.\n");
 | |
| 		}
 | |
| 		pf->num_lan_qps = pf->rss_size_max;
 | |
| 		queues_left -= pf->num_lan_qps;
 | |
| 	}
 | |
| 
 | |
| #ifdef I40E_FCOE
 | |
| 	if (pf->flags & I40E_FLAG_FCOE_ENABLED) {
 | |
| 		if (I40E_DEFAULT_FCOE <= queues_left) {
 | |
| 			pf->num_fcoe_qps = I40E_DEFAULT_FCOE;
 | |
| 		} else if (I40E_MINIMUM_FCOE <= queues_left) {
 | |
| 			pf->num_fcoe_qps = I40E_MINIMUM_FCOE;
 | |
| 		} else {
 | |
| 			pf->num_fcoe_qps = 0;
 | |
| 			pf->flags &= ~I40E_FLAG_FCOE_ENABLED;
 | |
| 			dev_info(&pf->pdev->dev, "not enough queues for FCoE. FCoE feature will be disabled\n");
 | |
| 		}
 | |
| 
 | |
| 		queues_left -= pf->num_fcoe_qps;
 | |
| 	}
 | |
| 
 | |
| #endif
 | |
| 	if (pf->flags & I40E_FLAG_FD_SB_ENABLED) {
 | |
| 		if (queues_left > 1) {
 | |
| 			queues_left -= 1; /* save 1 queue for FD */
 | |
| 		} else {
 | |
| 			pf->flags &= ~I40E_FLAG_FD_SB_ENABLED;
 | |
| 			dev_info(&pf->pdev->dev, "not enough queues for Flow Director. Flow Director feature is disabled\n");
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	if ((pf->flags & I40E_FLAG_SRIOV_ENABLED) &&
 | |
| 	    pf->num_vf_qps && pf->num_req_vfs && queues_left) {
 | |
| 		pf->num_req_vfs = min_t(int, pf->num_req_vfs,
 | |
| 					(queues_left / pf->num_vf_qps));
 | |
| 		queues_left -= (pf->num_req_vfs * pf->num_vf_qps);
 | |
| 	}
 | |
| 
 | |
| 	if ((pf->flags & I40E_FLAG_VMDQ_ENABLED) &&
 | |
| 	    pf->num_vmdq_vsis && pf->num_vmdq_qps && queues_left) {
 | |
| 		pf->num_vmdq_vsis = min_t(int, pf->num_vmdq_vsis,
 | |
| 					  (queues_left / pf->num_vmdq_qps));
 | |
| 		queues_left -= (pf->num_vmdq_vsis * pf->num_vmdq_qps);
 | |
| 	}
 | |
| 
 | |
| 	pf->queues_left = queues_left;
 | |
| #ifdef I40E_FCOE
 | |
| 	dev_info(&pf->pdev->dev, "fcoe queues = %d\n", pf->num_fcoe_qps);
 | |
| #endif
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_setup_pf_filter_control - Setup PF static filter control
 | |
|  * @pf: PF to be setup
 | |
|  *
 | |
|  * i40e_setup_pf_filter_control sets up a pf's initial filter control
 | |
|  * settings. If PE/FCoE are enabled then it will also set the per PF
 | |
|  * based filter sizes required for them. It also enables Flow director,
 | |
|  * ethertype and macvlan type filter settings for the pf.
 | |
|  *
 | |
|  * Returns 0 on success, negative on failure
 | |
|  **/
 | |
| static int i40e_setup_pf_filter_control(struct i40e_pf *pf)
 | |
| {
 | |
| 	struct i40e_filter_control_settings *settings = &pf->filter_settings;
 | |
| 
 | |
| 	settings->hash_lut_size = I40E_HASH_LUT_SIZE_128;
 | |
| 
 | |
| 	/* Flow Director is enabled */
 | |
| 	if (pf->flags & (I40E_FLAG_FD_SB_ENABLED | I40E_FLAG_FD_ATR_ENABLED))
 | |
| 		settings->enable_fdir = true;
 | |
| 
 | |
| 	/* Ethtype and MACVLAN filters enabled for PF */
 | |
| 	settings->enable_ethtype = true;
 | |
| 	settings->enable_macvlan = true;
 | |
| 
 | |
| 	if (i40e_set_filter_control(&pf->hw, settings))
 | |
| 		return -ENOENT;
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| #define INFO_STRING_LEN 255
 | |
| static void i40e_print_features(struct i40e_pf *pf)
 | |
| {
 | |
| 	struct i40e_hw *hw = &pf->hw;
 | |
| 	char *buf, *string;
 | |
| 
 | |
| 	string = kzalloc(INFO_STRING_LEN, GFP_KERNEL);
 | |
| 	if (!string) {
 | |
| 		dev_err(&pf->pdev->dev, "Features string allocation failed\n");
 | |
| 		return;
 | |
| 	}
 | |
| 
 | |
| 	buf = string;
 | |
| 
 | |
| 	buf += sprintf(string, "Features: PF-id[%d] ", hw->pf_id);
 | |
| #ifdef CONFIG_PCI_IOV
 | |
| 	buf += sprintf(buf, "VFs: %d ", pf->num_req_vfs);
 | |
| #endif
 | |
| 	buf += sprintf(buf, "VSIs: %d QP: %d ", pf->hw.func_caps.num_vsis,
 | |
| 		       pf->vsi[pf->lan_vsi]->num_queue_pairs);
 | |
| 
 | |
| 	if (pf->flags & I40E_FLAG_RSS_ENABLED)
 | |
| 		buf += sprintf(buf, "RSS ");
 | |
| 	if (pf->flags & I40E_FLAG_FD_ATR_ENABLED)
 | |
| 		buf += sprintf(buf, "FD_ATR ");
 | |
| 	if (pf->flags & I40E_FLAG_FD_SB_ENABLED) {
 | |
| 		buf += sprintf(buf, "FD_SB ");
 | |
| 		buf += sprintf(buf, "NTUPLE ");
 | |
| 	}
 | |
| 	if (pf->flags & I40E_FLAG_DCB_CAPABLE)
 | |
| 		buf += sprintf(buf, "DCB ");
 | |
| 	if (pf->flags & I40E_FLAG_PTP)
 | |
| 		buf += sprintf(buf, "PTP ");
 | |
| #ifdef I40E_FCOE
 | |
| 	if (pf->flags & I40E_FLAG_FCOE_ENABLED)
 | |
| 		buf += sprintf(buf, "FCOE ");
 | |
| #endif
 | |
| 
 | |
| 	BUG_ON(buf > (string + INFO_STRING_LEN));
 | |
| 	dev_info(&pf->pdev->dev, "%s\n", string);
 | |
| 	kfree(string);
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_probe - Device initialization routine
 | |
|  * @pdev: PCI device information struct
 | |
|  * @ent: entry in i40e_pci_tbl
 | |
|  *
 | |
|  * i40e_probe initializes a pf identified by a pci_dev structure.
 | |
|  * The OS initialization, configuring of the pf private structure,
 | |
|  * and a hardware reset occur.
 | |
|  *
 | |
|  * Returns 0 on success, negative on failure
 | |
|  **/
 | |
| static int i40e_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 | |
| {
 | |
| 	struct i40e_pf *pf;
 | |
| 	struct i40e_hw *hw;
 | |
| 	static u16 pfs_found;
 | |
| 	u16 link_status;
 | |
| 	int err = 0;
 | |
| 	u32 len;
 | |
| 	u32 i;
 | |
| 
 | |
| 	err = pci_enable_device_mem(pdev);
 | |
| 	if (err)
 | |
| 		return err;
 | |
| 
 | |
| 	/* set up for high or low dma */
 | |
| 	err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64));
 | |
| 	if (err) {
 | |
| 		err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
 | |
| 		if (err) {
 | |
| 			dev_err(&pdev->dev,
 | |
| 				"DMA configuration failed: 0x%x\n", err);
 | |
| 			goto err_dma;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	/* set up pci connections */
 | |
| 	err = pci_request_selected_regions(pdev, pci_select_bars(pdev,
 | |
| 					   IORESOURCE_MEM), i40e_driver_name);
 | |
| 	if (err) {
 | |
| 		dev_info(&pdev->dev,
 | |
| 			 "pci_request_selected_regions failed %d\n", err);
 | |
| 		goto err_pci_reg;
 | |
| 	}
 | |
| 
 | |
| 	pci_enable_pcie_error_reporting(pdev);
 | |
| 	pci_set_master(pdev);
 | |
| 
 | |
| 	/* Now that we have a PCI connection, we need to do the
 | |
| 	 * low level device setup.  This is primarily setting up
 | |
| 	 * the Admin Queue structures and then querying for the
 | |
| 	 * device's current profile information.
 | |
| 	 */
 | |
| 	pf = kzalloc(sizeof(*pf), GFP_KERNEL);
 | |
| 	if (!pf) {
 | |
| 		err = -ENOMEM;
 | |
| 		goto err_pf_alloc;
 | |
| 	}
 | |
| 	pf->next_vsi = 0;
 | |
| 	pf->pdev = pdev;
 | |
| 	set_bit(__I40E_DOWN, &pf->state);
 | |
| 
 | |
| 	hw = &pf->hw;
 | |
| 	hw->back = pf;
 | |
| 	hw->hw_addr = ioremap(pci_resource_start(pdev, 0),
 | |
| 			      pci_resource_len(pdev, 0));
 | |
| 	if (!hw->hw_addr) {
 | |
| 		err = -EIO;
 | |
| 		dev_info(&pdev->dev, "ioremap(0x%04x, 0x%04x) failed: 0x%x\n",
 | |
| 			 (unsigned int)pci_resource_start(pdev, 0),
 | |
| 			 (unsigned int)pci_resource_len(pdev, 0), err);
 | |
| 		goto err_ioremap;
 | |
| 	}
 | |
| 	hw->vendor_id = pdev->vendor;
 | |
| 	hw->device_id = pdev->device;
 | |
| 	pci_read_config_byte(pdev, PCI_REVISION_ID, &hw->revision_id);
 | |
| 	hw->subsystem_vendor_id = pdev->subsystem_vendor;
 | |
| 	hw->subsystem_device_id = pdev->subsystem_device;
 | |
| 	hw->bus.device = PCI_SLOT(pdev->devfn);
 | |
| 	hw->bus.func = PCI_FUNC(pdev->devfn);
 | |
| 	pf->instance = pfs_found;
 | |
| 
 | |
| 	/* do a special CORER for clearing PXE mode once at init */
 | |
| 	if (hw->revision_id == 0 &&
 | |
| 	    (rd32(hw, I40E_GLLAN_RCTL_0) & I40E_GLLAN_RCTL_0_PXE_MODE_MASK)) {
 | |
| 		wr32(hw, I40E_GLGEN_RTRIG, I40E_GLGEN_RTRIG_CORER_MASK);
 | |
| 		i40e_flush(hw);
 | |
| 		msleep(200);
 | |
| 		pf->corer_count++;
 | |
| 
 | |
| 		i40e_clear_pxe_mode(hw);
 | |
| 	}
 | |
| 
 | |
| 	/* Reset here to make sure all is clean and to define PF 'n' */
 | |
| 	i40e_clear_hw(hw);
 | |
| 	err = i40e_pf_reset(hw);
 | |
| 	if (err) {
 | |
| 		dev_info(&pdev->dev, "Initial pf_reset failed: %d\n", err);
 | |
| 		goto err_pf_reset;
 | |
| 	}
 | |
| 	pf->pfr_count++;
 | |
| 
 | |
| 	hw->aq.num_arq_entries = I40E_AQ_LEN;
 | |
| 	hw->aq.num_asq_entries = I40E_AQ_LEN;
 | |
| 	hw->aq.arq_buf_size = I40E_MAX_AQ_BUF_SIZE;
 | |
| 	hw->aq.asq_buf_size = I40E_MAX_AQ_BUF_SIZE;
 | |
| 	pf->adminq_work_limit = I40E_AQ_WORK_LIMIT;
 | |
| 	snprintf(pf->misc_int_name, sizeof(pf->misc_int_name) - 1,
 | |
| 		 "%s-pf%d:misc",
 | |
| 		 dev_driver_string(&pf->pdev->dev), pf->hw.pf_id);
 | |
| 
 | |
| 	err = i40e_init_shared_code(hw);
 | |
| 	if (err) {
 | |
| 		dev_info(&pdev->dev, "init_shared_code failed: %d\n", err);
 | |
| 		goto err_pf_reset;
 | |
| 	}
 | |
| 
 | |
| 	/* set up a default setting for link flow control */
 | |
| 	pf->hw.fc.requested_mode = I40E_FC_NONE;
 | |
| 
 | |
| 	err = i40e_init_adminq(hw);
 | |
| 	dev_info(&pdev->dev, "%s\n", i40e_fw_version_str(hw));
 | |
| 	if (err) {
 | |
| 		dev_info(&pdev->dev,
 | |
| 			 "The driver for the device stopped because the NVM image is newer than expected. You must install the most recent version of the network driver.\n");
 | |
| 		goto err_pf_reset;
 | |
| 	}
 | |
| 
 | |
| 	if (hw->aq.api_maj_ver == I40E_FW_API_VERSION_MAJOR &&
 | |
| 	    hw->aq.api_min_ver > I40E_FW_API_VERSION_MINOR)
 | |
| 		dev_info(&pdev->dev,
 | |
| 			 "The driver for the device detected a newer version of the NVM image than expected. Please install the most recent version of the network driver.\n");
 | |
| 	else if (hw->aq.api_maj_ver < I40E_FW_API_VERSION_MAJOR ||
 | |
| 		 hw->aq.api_min_ver < (I40E_FW_API_VERSION_MINOR - 1))
 | |
| 		dev_info(&pdev->dev,
 | |
| 			 "The driver for the device detected an older version of the NVM image than expected. Please update the NVM image.\n");
 | |
| 
 | |
| 
 | |
| 	i40e_verify_eeprom(pf);
 | |
| 
 | |
| 	/* Rev 0 hardware was never productized */
 | |
| 	if (hw->revision_id < 1)
 | |
| 		dev_warn(&pdev->dev, "This device is a pre-production adapter/LOM. Please be aware there may be issues with your hardware. If you are experiencing problems please contact your Intel or hardware representative who provided you with this hardware.\n");
 | |
| 
 | |
| 	i40e_clear_pxe_mode(hw);
 | |
| 	err = i40e_get_capabilities(pf);
 | |
| 	if (err)
 | |
| 		goto err_adminq_setup;
 | |
| 
 | |
| 	err = i40e_sw_init(pf);
 | |
| 	if (err) {
 | |
| 		dev_info(&pdev->dev, "sw_init failed: %d\n", err);
 | |
| 		goto err_sw_init;
 | |
| 	}
 | |
| 
 | |
| 	err = i40e_init_lan_hmc(hw, hw->func_caps.num_tx_qp,
 | |
| 				hw->func_caps.num_rx_qp,
 | |
| 				pf->fcoe_hmc_cntx_num, pf->fcoe_hmc_filt_num);
 | |
| 	if (err) {
 | |
| 		dev_info(&pdev->dev, "init_lan_hmc failed: %d\n", err);
 | |
| 		goto err_init_lan_hmc;
 | |
| 	}
 | |
| 
 | |
| 	err = i40e_configure_lan_hmc(hw, I40E_HMC_MODEL_DIRECT_ONLY);
 | |
| 	if (err) {
 | |
| 		dev_info(&pdev->dev, "configure_lan_hmc failed: %d\n", err);
 | |
| 		err = -ENOENT;
 | |
| 		goto err_configure_lan_hmc;
 | |
| 	}
 | |
| 
 | |
| 	i40e_get_mac_addr(hw, hw->mac.addr);
 | |
| 	if (!is_valid_ether_addr(hw->mac.addr)) {
 | |
| 		dev_info(&pdev->dev, "invalid MAC address %pM\n", hw->mac.addr);
 | |
| 		err = -EIO;
 | |
| 		goto err_mac_addr;
 | |
| 	}
 | |
| 	dev_info(&pdev->dev, "MAC address: %pM\n", hw->mac.addr);
 | |
| 	ether_addr_copy(hw->mac.perm_addr, hw->mac.addr);
 | |
| 	i40e_get_port_mac_addr(hw, hw->mac.port_addr);
 | |
| 	if (is_valid_ether_addr(hw->mac.port_addr))
 | |
| 		pf->flags |= I40E_FLAG_PORT_ID_VALID;
 | |
| #ifdef I40E_FCOE
 | |
| 	err = i40e_get_san_mac_addr(hw, hw->mac.san_addr);
 | |
| 	if (err)
 | |
| 		dev_info(&pdev->dev,
 | |
| 			 "(non-fatal) SAN MAC retrieval failed: %d\n", err);
 | |
| 	if (!is_valid_ether_addr(hw->mac.san_addr)) {
 | |
| 		dev_warn(&pdev->dev, "invalid SAN MAC address %pM, falling back to LAN MAC\n",
 | |
| 			 hw->mac.san_addr);
 | |
| 		ether_addr_copy(hw->mac.san_addr, hw->mac.addr);
 | |
| 	}
 | |
| 	dev_info(&pf->pdev->dev, "SAN MAC: %pM\n", hw->mac.san_addr);
 | |
| #endif /* I40E_FCOE */
 | |
| 
 | |
| 	pci_set_drvdata(pdev, pf);
 | |
| 	pci_save_state(pdev);
 | |
| #ifdef CONFIG_I40E_DCB
 | |
| 	err = i40e_init_pf_dcb(pf);
 | |
| 	if (err) {
 | |
| 		dev_info(&pdev->dev, "init_pf_dcb failed: %d\n", err);
 | |
| 		pf->flags &= ~I40E_FLAG_DCB_CAPABLE;
 | |
| 		/* Continue without DCB enabled */
 | |
| 	}
 | |
| #endif /* CONFIG_I40E_DCB */
 | |
| 
 | |
| 	/* set up periodic task facility */
 | |
| 	setup_timer(&pf->service_timer, i40e_service_timer, (unsigned long)pf);
 | |
| 	pf->service_timer_period = HZ;
 | |
| 
 | |
| 	INIT_WORK(&pf->service_task, i40e_service_task);
 | |
| 	clear_bit(__I40E_SERVICE_SCHED, &pf->state);
 | |
| 	pf->flags |= I40E_FLAG_NEED_LINK_UPDATE;
 | |
| 	pf->link_check_timeout = jiffies;
 | |
| 
 | |
| 	/* WoL defaults to disabled */
 | |
| 	pf->wol_en = false;
 | |
| 	device_set_wakeup_enable(&pf->pdev->dev, pf->wol_en);
 | |
| 
 | |
| 	/* set up the main switch operations */
 | |
| 	i40e_determine_queue_usage(pf);
 | |
| 	i40e_init_interrupt_scheme(pf);
 | |
| 
 | |
| 	/* The number of VSIs reported by the FW is the minimum guaranteed
 | |
| 	 * to us; HW supports far more and we share the remaining pool with
 | |
| 	 * the other PFs. We allocate space for more than the guarantee with
 | |
| 	 * the understanding that we might not get them all later.
 | |
| 	 */
 | |
| 	if (pf->hw.func_caps.num_vsis < I40E_MIN_VSI_ALLOC)
 | |
| 		pf->num_alloc_vsi = I40E_MIN_VSI_ALLOC;
 | |
| 	else
 | |
| 		pf->num_alloc_vsi = pf->hw.func_caps.num_vsis;
 | |
| 
 | |
| 	/* Set up the *vsi struct and our local tracking of the MAIN PF vsi. */
 | |
| 	len = sizeof(struct i40e_vsi *) * pf->num_alloc_vsi;
 | |
| 	pf->vsi = kzalloc(len, GFP_KERNEL);
 | |
| 	if (!pf->vsi) {
 | |
| 		err = -ENOMEM;
 | |
| 		goto err_switch_setup;
 | |
| 	}
 | |
| 
 | |
| 	err = i40e_setup_pf_switch(pf, false);
 | |
| 	if (err) {
 | |
| 		dev_info(&pdev->dev, "setup_pf_switch failed: %d\n", err);
 | |
| 		goto err_vsis;
 | |
| 	}
 | |
| 	/* if FDIR VSI was set up, start it now */
 | |
| 	for (i = 0; i < pf->num_alloc_vsi; i++) {
 | |
| 		if (pf->vsi[i] && pf->vsi[i]->type == I40E_VSI_FDIR) {
 | |
| 			i40e_vsi_open(pf->vsi[i]);
 | |
| 			break;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	/* The main driver is (mostly) up and happy. We need to set this state
 | |
| 	 * before setting up the misc vector or we get a race and the vector
 | |
| 	 * ends up disabled forever.
 | |
| 	 */
 | |
| 	clear_bit(__I40E_DOWN, &pf->state);
 | |
| 
 | |
| 	/* In case of MSIX we are going to setup the misc vector right here
 | |
| 	 * to handle admin queue events etc. In case of legacy and MSI
 | |
| 	 * the misc functionality and queue processing is combined in
 | |
| 	 * the same vector and that gets setup at open.
 | |
| 	 */
 | |
| 	if (pf->flags & I40E_FLAG_MSIX_ENABLED) {
 | |
| 		err = i40e_setup_misc_vector(pf);
 | |
| 		if (err) {
 | |
| 			dev_info(&pdev->dev,
 | |
| 				 "setup of misc vector failed: %d\n", err);
 | |
| 			goto err_vsis;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| #ifdef CONFIG_PCI_IOV
 | |
| 	/* prep for VF support */
 | |
| 	if ((pf->flags & I40E_FLAG_SRIOV_ENABLED) &&
 | |
| 	    (pf->flags & I40E_FLAG_MSIX_ENABLED) &&
 | |
| 	    !test_bit(__I40E_BAD_EEPROM, &pf->state)) {
 | |
| 		u32 val;
 | |
| 
 | |
| 		/* disable link interrupts for VFs */
 | |
| 		val = rd32(hw, I40E_PFGEN_PORTMDIO_NUM);
 | |
| 		val &= ~I40E_PFGEN_PORTMDIO_NUM_VFLINK_STAT_ENA_MASK;
 | |
| 		wr32(hw, I40E_PFGEN_PORTMDIO_NUM, val);
 | |
| 		i40e_flush(hw);
 | |
| 
 | |
| 		if (pci_num_vf(pdev)) {
 | |
| 			dev_info(&pdev->dev,
 | |
| 				 "Active VFs found, allocating resources.\n");
 | |
| 			err = i40e_alloc_vfs(pf, pci_num_vf(pdev));
 | |
| 			if (err)
 | |
| 				dev_info(&pdev->dev,
 | |
| 					 "Error %d allocating resources for existing VFs\n",
 | |
| 					 err);
 | |
| 		}
 | |
| 	}
 | |
| #endif /* CONFIG_PCI_IOV */
 | |
| 
 | |
| 	pfs_found++;
 | |
| 
 | |
| 	i40e_dbg_pf_init(pf);
 | |
| 
 | |
| 	/* tell the firmware that we're starting */
 | |
| 	i40e_send_version(pf);
 | |
| 
 | |
| 	/* since everything's happy, start the service_task timer */
 | |
| 	mod_timer(&pf->service_timer,
 | |
| 		  round_jiffies(jiffies + pf->service_timer_period));
 | |
| 
 | |
| #ifdef I40E_FCOE
 | |
| 	/* create FCoE interface */
 | |
| 	i40e_fcoe_vsi_setup(pf);
 | |
| 
 | |
| #endif
 | |
| 	/* Get the negotiated link width and speed from PCI config space */
 | |
| 	pcie_capability_read_word(pf->pdev, PCI_EXP_LNKSTA, &link_status);
 | |
| 
 | |
| 	i40e_set_pci_config_data(hw, link_status);
 | |
| 
 | |
| 	dev_info(&pdev->dev, "PCI-Express: %s %s\n",
 | |
| 		(hw->bus.speed == i40e_bus_speed_8000 ? "Speed 8.0GT/s" :
 | |
| 		 hw->bus.speed == i40e_bus_speed_5000 ? "Speed 5.0GT/s" :
 | |
| 		 hw->bus.speed == i40e_bus_speed_2500 ? "Speed 2.5GT/s" :
 | |
| 		 "Unknown"),
 | |
| 		(hw->bus.width == i40e_bus_width_pcie_x8 ? "Width x8" :
 | |
| 		 hw->bus.width == i40e_bus_width_pcie_x4 ? "Width x4" :
 | |
| 		 hw->bus.width == i40e_bus_width_pcie_x2 ? "Width x2" :
 | |
| 		 hw->bus.width == i40e_bus_width_pcie_x1 ? "Width x1" :
 | |
| 		 "Unknown"));
 | |
| 
 | |
| 	if (hw->bus.width < i40e_bus_width_pcie_x8 ||
 | |
| 	    hw->bus.speed < i40e_bus_speed_8000) {
 | |
| 		dev_warn(&pdev->dev, "PCI-Express bandwidth available for this device may be insufficient for optimal performance.\n");
 | |
| 		dev_warn(&pdev->dev, "Please move the device to a different PCI-e link with more lanes and/or higher transfer rate.\n");
 | |
| 	}
 | |
| 
 | |
| 	/* print a string summarizing features */
 | |
| 	i40e_print_features(pf);
 | |
| 
 | |
| 	return 0;
 | |
| 
 | |
| 	/* Unwind what we've done if something failed in the setup */
 | |
| err_vsis:
 | |
| 	set_bit(__I40E_DOWN, &pf->state);
 | |
| 	i40e_clear_interrupt_scheme(pf);
 | |
| 	kfree(pf->vsi);
 | |
| err_switch_setup:
 | |
| 	i40e_reset_interrupt_capability(pf);
 | |
| 	del_timer_sync(&pf->service_timer);
 | |
| err_mac_addr:
 | |
| err_configure_lan_hmc:
 | |
| 	(void)i40e_shutdown_lan_hmc(hw);
 | |
| err_init_lan_hmc:
 | |
| 	kfree(pf->qp_pile);
 | |
| 	kfree(pf->irq_pile);
 | |
| err_sw_init:
 | |
| err_adminq_setup:
 | |
| 	(void)i40e_shutdown_adminq(hw);
 | |
| err_pf_reset:
 | |
| 	iounmap(hw->hw_addr);
 | |
| err_ioremap:
 | |
| 	kfree(pf);
 | |
| err_pf_alloc:
 | |
| 	pci_disable_pcie_error_reporting(pdev);
 | |
| 	pci_release_selected_regions(pdev,
 | |
| 				     pci_select_bars(pdev, IORESOURCE_MEM));
 | |
| err_pci_reg:
 | |
| err_dma:
 | |
| 	pci_disable_device(pdev);
 | |
| 	return err;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_remove - Device removal routine
 | |
|  * @pdev: PCI device information struct
 | |
|  *
 | |
|  * i40e_remove is called by the PCI subsystem to alert the driver
 | |
|  * that is should release a PCI device.  This could be caused by a
 | |
|  * Hot-Plug event, or because the driver is going to be removed from
 | |
|  * memory.
 | |
|  **/
 | |
| static void i40e_remove(struct pci_dev *pdev)
 | |
| {
 | |
| 	struct i40e_pf *pf = pci_get_drvdata(pdev);
 | |
| 	i40e_status ret_code;
 | |
| 	int i;
 | |
| 
 | |
| 	i40e_dbg_pf_exit(pf);
 | |
| 
 | |
| 	i40e_ptp_stop(pf);
 | |
| 
 | |
| 	/* no more scheduling of any task */
 | |
| 	set_bit(__I40E_DOWN, &pf->state);
 | |
| 	del_timer_sync(&pf->service_timer);
 | |
| 	cancel_work_sync(&pf->service_task);
 | |
| 
 | |
| 	if (pf->flags & I40E_FLAG_SRIOV_ENABLED) {
 | |
| 		i40e_free_vfs(pf);
 | |
| 		pf->flags &= ~I40E_FLAG_SRIOV_ENABLED;
 | |
| 	}
 | |
| 
 | |
| 	i40e_fdir_teardown(pf);
 | |
| 
 | |
| 	/* If there is a switch structure or any orphans, remove them.
 | |
| 	 * This will leave only the PF's VSI remaining.
 | |
| 	 */
 | |
| 	for (i = 0; i < I40E_MAX_VEB; i++) {
 | |
| 		if (!pf->veb[i])
 | |
| 			continue;
 | |
| 
 | |
| 		if (pf->veb[i]->uplink_seid == pf->mac_seid ||
 | |
| 		    pf->veb[i]->uplink_seid == 0)
 | |
| 			i40e_switch_branch_release(pf->veb[i]);
 | |
| 	}
 | |
| 
 | |
| 	/* Now we can shutdown the PF's VSI, just before we kill
 | |
| 	 * adminq and hmc.
 | |
| 	 */
 | |
| 	if (pf->vsi[pf->lan_vsi])
 | |
| 		i40e_vsi_release(pf->vsi[pf->lan_vsi]);
 | |
| 
 | |
| 	i40e_stop_misc_vector(pf);
 | |
| 	if (pf->flags & I40E_FLAG_MSIX_ENABLED) {
 | |
| 		synchronize_irq(pf->msix_entries[0].vector);
 | |
| 		free_irq(pf->msix_entries[0].vector, pf);
 | |
| 	}
 | |
| 
 | |
| 	/* shutdown and destroy the HMC */
 | |
| 	if (pf->hw.hmc.hmc_obj) {
 | |
| 		ret_code = i40e_shutdown_lan_hmc(&pf->hw);
 | |
| 		if (ret_code)
 | |
| 			dev_warn(&pdev->dev,
 | |
| 				 "Failed to destroy the HMC resources: %d\n",
 | |
| 				 ret_code);
 | |
| 	}
 | |
| 
 | |
| 	/* shutdown the adminq */
 | |
| 	ret_code = i40e_shutdown_adminq(&pf->hw);
 | |
| 	if (ret_code)
 | |
| 		dev_warn(&pdev->dev,
 | |
| 			 "Failed to destroy the Admin Queue resources: %d\n",
 | |
| 			 ret_code);
 | |
| 
 | |
| 	/* Clear all dynamic memory lists of rings, q_vectors, and VSIs */
 | |
| 	i40e_clear_interrupt_scheme(pf);
 | |
| 	for (i = 0; i < pf->num_alloc_vsi; i++) {
 | |
| 		if (pf->vsi[i]) {
 | |
| 			i40e_vsi_clear_rings(pf->vsi[i]);
 | |
| 			i40e_vsi_clear(pf->vsi[i]);
 | |
| 			pf->vsi[i] = NULL;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	for (i = 0; i < I40E_MAX_VEB; i++) {
 | |
| 		kfree(pf->veb[i]);
 | |
| 		pf->veb[i] = NULL;
 | |
| 	}
 | |
| 
 | |
| 	kfree(pf->qp_pile);
 | |
| 	kfree(pf->irq_pile);
 | |
| 	kfree(pf->vsi);
 | |
| 
 | |
| 	iounmap(pf->hw.hw_addr);
 | |
| 	kfree(pf);
 | |
| 	pci_release_selected_regions(pdev,
 | |
| 				     pci_select_bars(pdev, IORESOURCE_MEM));
 | |
| 
 | |
| 	pci_disable_pcie_error_reporting(pdev);
 | |
| 	pci_disable_device(pdev);
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_pci_error_detected - warning that something funky happened in PCI land
 | |
|  * @pdev: PCI device information struct
 | |
|  *
 | |
|  * Called to warn that something happened and the error handling steps
 | |
|  * are in progress.  Allows the driver to quiesce things, be ready for
 | |
|  * remediation.
 | |
|  **/
 | |
| static pci_ers_result_t i40e_pci_error_detected(struct pci_dev *pdev,
 | |
| 						enum pci_channel_state error)
 | |
| {
 | |
| 	struct i40e_pf *pf = pci_get_drvdata(pdev);
 | |
| 
 | |
| 	dev_info(&pdev->dev, "%s: error %d\n", __func__, error);
 | |
| 
 | |
| 	/* shutdown all operations */
 | |
| 	if (!test_bit(__I40E_SUSPENDED, &pf->state)) {
 | |
| 		rtnl_lock();
 | |
| 		i40e_prep_for_reset(pf);
 | |
| 		rtnl_unlock();
 | |
| 	}
 | |
| 
 | |
| 	/* Request a slot reset */
 | |
| 	return PCI_ERS_RESULT_NEED_RESET;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_pci_error_slot_reset - a PCI slot reset just happened
 | |
|  * @pdev: PCI device information struct
 | |
|  *
 | |
|  * Called to find if the driver can work with the device now that
 | |
|  * the pci slot has been reset.  If a basic connection seems good
 | |
|  * (registers are readable and have sane content) then return a
 | |
|  * happy little PCI_ERS_RESULT_xxx.
 | |
|  **/
 | |
| static pci_ers_result_t i40e_pci_error_slot_reset(struct pci_dev *pdev)
 | |
| {
 | |
| 	struct i40e_pf *pf = pci_get_drvdata(pdev);
 | |
| 	pci_ers_result_t result;
 | |
| 	int err;
 | |
| 	u32 reg;
 | |
| 
 | |
| 	dev_info(&pdev->dev, "%s\n", __func__);
 | |
| 	if (pci_enable_device_mem(pdev)) {
 | |
| 		dev_info(&pdev->dev,
 | |
| 			 "Cannot re-enable PCI device after reset.\n");
 | |
| 		result = PCI_ERS_RESULT_DISCONNECT;
 | |
| 	} else {
 | |
| 		pci_set_master(pdev);
 | |
| 		pci_restore_state(pdev);
 | |
| 		pci_save_state(pdev);
 | |
| 		pci_wake_from_d3(pdev, false);
 | |
| 
 | |
| 		reg = rd32(&pf->hw, I40E_GLGEN_RTRIG);
 | |
| 		if (reg == 0)
 | |
| 			result = PCI_ERS_RESULT_RECOVERED;
 | |
| 		else
 | |
| 			result = PCI_ERS_RESULT_DISCONNECT;
 | |
| 	}
 | |
| 
 | |
| 	err = pci_cleanup_aer_uncorrect_error_status(pdev);
 | |
| 	if (err) {
 | |
| 		dev_info(&pdev->dev,
 | |
| 			 "pci_cleanup_aer_uncorrect_error_status failed 0x%0x\n",
 | |
| 			 err);
 | |
| 		/* non-fatal, continue */
 | |
| 	}
 | |
| 
 | |
| 	return result;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_pci_error_resume - restart operations after PCI error recovery
 | |
|  * @pdev: PCI device information struct
 | |
|  *
 | |
|  * Called to allow the driver to bring things back up after PCI error
 | |
|  * and/or reset recovery has finished.
 | |
|  **/
 | |
| static void i40e_pci_error_resume(struct pci_dev *pdev)
 | |
| {
 | |
| 	struct i40e_pf *pf = pci_get_drvdata(pdev);
 | |
| 
 | |
| 	dev_info(&pdev->dev, "%s\n", __func__);
 | |
| 	if (test_bit(__I40E_SUSPENDED, &pf->state))
 | |
| 		return;
 | |
| 
 | |
| 	rtnl_lock();
 | |
| 	i40e_handle_reset_warning(pf);
 | |
| 	rtnl_lock();
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_shutdown - PCI callback for shutting down
 | |
|  * @pdev: PCI device information struct
 | |
|  **/
 | |
| static void i40e_shutdown(struct pci_dev *pdev)
 | |
| {
 | |
| 	struct i40e_pf *pf = pci_get_drvdata(pdev);
 | |
| 	struct i40e_hw *hw = &pf->hw;
 | |
| 
 | |
| 	set_bit(__I40E_SUSPENDED, &pf->state);
 | |
| 	set_bit(__I40E_DOWN, &pf->state);
 | |
| 	rtnl_lock();
 | |
| 	i40e_prep_for_reset(pf);
 | |
| 	rtnl_unlock();
 | |
| 
 | |
| 	wr32(hw, I40E_PFPM_APM, (pf->wol_en ? I40E_PFPM_APM_APME_MASK : 0));
 | |
| 	wr32(hw, I40E_PFPM_WUFC, (pf->wol_en ? I40E_PFPM_WUFC_MAG_MASK : 0));
 | |
| 
 | |
| 	if (system_state == SYSTEM_POWER_OFF) {
 | |
| 		pci_wake_from_d3(pdev, pf->wol_en);
 | |
| 		pci_set_power_state(pdev, PCI_D3hot);
 | |
| 	}
 | |
| }
 | |
| 
 | |
| #ifdef CONFIG_PM
 | |
| /**
 | |
|  * i40e_suspend - PCI callback for moving to D3
 | |
|  * @pdev: PCI device information struct
 | |
|  **/
 | |
| static int i40e_suspend(struct pci_dev *pdev, pm_message_t state)
 | |
| {
 | |
| 	struct i40e_pf *pf = pci_get_drvdata(pdev);
 | |
| 	struct i40e_hw *hw = &pf->hw;
 | |
| 
 | |
| 	set_bit(__I40E_SUSPENDED, &pf->state);
 | |
| 	set_bit(__I40E_DOWN, &pf->state);
 | |
| 	rtnl_lock();
 | |
| 	i40e_prep_for_reset(pf);
 | |
| 	rtnl_unlock();
 | |
| 
 | |
| 	wr32(hw, I40E_PFPM_APM, (pf->wol_en ? I40E_PFPM_APM_APME_MASK : 0));
 | |
| 	wr32(hw, I40E_PFPM_WUFC, (pf->wol_en ? I40E_PFPM_WUFC_MAG_MASK : 0));
 | |
| 
 | |
| 	pci_wake_from_d3(pdev, pf->wol_en);
 | |
| 	pci_set_power_state(pdev, PCI_D3hot);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * i40e_resume - PCI callback for waking up from D3
 | |
|  * @pdev: PCI device information struct
 | |
|  **/
 | |
| static int i40e_resume(struct pci_dev *pdev)
 | |
| {
 | |
| 	struct i40e_pf *pf = pci_get_drvdata(pdev);
 | |
| 	u32 err;
 | |
| 
 | |
| 	pci_set_power_state(pdev, PCI_D0);
 | |
| 	pci_restore_state(pdev);
 | |
| 	/* pci_restore_state() clears dev->state_saves, so
 | |
| 	 * call pci_save_state() again to restore it.
 | |
| 	 */
 | |
| 	pci_save_state(pdev);
 | |
| 
 | |
| 	err = pci_enable_device_mem(pdev);
 | |
| 	if (err) {
 | |
| 		dev_err(&pdev->dev,
 | |
| 			"%s: Cannot enable PCI device from suspend\n",
 | |
| 			__func__);
 | |
| 		return err;
 | |
| 	}
 | |
| 	pci_set_master(pdev);
 | |
| 
 | |
| 	/* no wakeup events while running */
 | |
| 	pci_wake_from_d3(pdev, false);
 | |
| 
 | |
| 	/* handling the reset will rebuild the device state */
 | |
| 	if (test_and_clear_bit(__I40E_SUSPENDED, &pf->state)) {
 | |
| 		clear_bit(__I40E_DOWN, &pf->state);
 | |
| 		rtnl_lock();
 | |
| 		i40e_reset_and_rebuild(pf, false);
 | |
| 		rtnl_unlock();
 | |
| 	}
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| #endif
 | |
| static const struct pci_error_handlers i40e_err_handler = {
 | |
| 	.error_detected = i40e_pci_error_detected,
 | |
| 	.slot_reset = i40e_pci_error_slot_reset,
 | |
| 	.resume = i40e_pci_error_resume,
 | |
| };
 | |
| 
 | |
| static struct pci_driver i40e_driver = {
 | |
| 	.name     = i40e_driver_name,
 | |
| 	.id_table = i40e_pci_tbl,
 | |
| 	.probe    = i40e_probe,
 | |
| 	.remove   = i40e_remove,
 | |
| #ifdef CONFIG_PM
 | |
| 	.suspend  = i40e_suspend,
 | |
| 	.resume   = i40e_resume,
 | |
| #endif
 | |
| 	.shutdown = i40e_shutdown,
 | |
| 	.err_handler = &i40e_err_handler,
 | |
| 	.sriov_configure = i40e_pci_sriov_configure,
 | |
| };
 | |
| 
 | |
| /**
 | |
|  * i40e_init_module - Driver registration routine
 | |
|  *
 | |
|  * i40e_init_module is the first routine called when the driver is
 | |
|  * loaded. All it does is register with the PCI subsystem.
 | |
|  **/
 | |
| static int __init i40e_init_module(void)
 | |
| {
 | |
| 	pr_info("%s: %s - version %s\n", i40e_driver_name,
 | |
| 		i40e_driver_string, i40e_driver_version_str);
 | |
| 	pr_info("%s: %s\n", i40e_driver_name, i40e_copyright);
 | |
| 	i40e_dbg_init();
 | |
| 	return pci_register_driver(&i40e_driver);
 | |
| }
 | |
| module_init(i40e_init_module);
 | |
| 
 | |
| /**
 | |
|  * i40e_exit_module - Driver exit cleanup routine
 | |
|  *
 | |
|  * i40e_exit_module is called just before the driver is removed
 | |
|  * from memory.
 | |
|  **/
 | |
| static void __exit i40e_exit_module(void)
 | |
| {
 | |
| 	pci_unregister_driver(&i40e_driver);
 | |
| 	i40e_dbg_exit();
 | |
| }
 | |
| module_exit(i40e_exit_module);
 |