 9130addad2
			
		
	
	
	9130addad2
	
	
	
		
			
			Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
		
			
				
	
	
		
			422 lines
		
	
	
	
		
			10 KiB
			
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			422 lines
		
	
	
	
		
			10 KiB
			
		
	
	
	
		
			C
		
	
	
	
	
	
| /*
 | |
|  * at91_cf.c -- AT91 CompactFlash controller driver
 | |
|  *
 | |
|  * Copyright (C) 2005 David Brownell
 | |
|  *
 | |
|  * This program is free software; you can redistribute it and/or modify
 | |
|  * it under the terms of the GNU General Public License as published by
 | |
|  * the Free Software Foundation; either version 2 of the License, or
 | |
|  * (at your option) any later version.
 | |
|  */
 | |
| 
 | |
| #include <linux/module.h>
 | |
| #include <linux/kernel.h>
 | |
| #include <linux/platform_device.h>
 | |
| #include <linux/errno.h>
 | |
| #include <linux/init.h>
 | |
| #include <linux/interrupt.h>
 | |
| 
 | |
| #include <pcmcia/ss.h>
 | |
| 
 | |
| #include <mach/hardware.h>
 | |
| #include <asm/io.h>
 | |
| #include <asm/sizes.h>
 | |
| #include <asm/gpio.h>
 | |
| 
 | |
| #include <mach/board.h>
 | |
| #include <mach/at91rm9200_mc.h>
 | |
| 
 | |
| 
 | |
| /*
 | |
|  * A0..A10 work in each range; A23 indicates I/O space;  A25 is CFRNW;
 | |
|  * some other bit in {A24,A22..A11} is nREG to flag memory access
 | |
|  * (vs attributes).  So more than 2KB/region would just be waste.
 | |
|  * Note: These are offsets from the physical base address.
 | |
|  */
 | |
| #define	CF_ATTR_PHYS	(0)
 | |
| #define	CF_IO_PHYS	(1 << 23)
 | |
| #define	CF_MEM_PHYS	(0x017ff800)
 | |
| 
 | |
| /*--------------------------------------------------------------------------*/
 | |
| 
 | |
| static const char driver_name[] = "at91_cf";
 | |
| 
 | |
| struct at91_cf_socket {
 | |
| 	struct pcmcia_socket	socket;
 | |
| 
 | |
| 	unsigned		present:1;
 | |
| 
 | |
| 	struct platform_device	*pdev;
 | |
| 	struct at91_cf_data	*board;
 | |
| 
 | |
| 	unsigned long		phys_baseaddr;
 | |
| };
 | |
| 
 | |
| #define	SZ_2K			(2 * SZ_1K)
 | |
| 
 | |
| static inline int at91_cf_present(struct at91_cf_socket *cf)
 | |
| {
 | |
| 	return !gpio_get_value(cf->board->det_pin);
 | |
| }
 | |
| 
 | |
| /*--------------------------------------------------------------------------*/
 | |
| 
 | |
| static int at91_cf_ss_init(struct pcmcia_socket *s)
 | |
| {
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static irqreturn_t at91_cf_irq(int irq, void *_cf)
 | |
| {
 | |
| 	struct at91_cf_socket *cf = _cf;
 | |
| 
 | |
| 	if (irq == cf->board->det_pin) {
 | |
| 		unsigned present = at91_cf_present(cf);
 | |
| 
 | |
| 		/* kick pccard as needed */
 | |
| 		if (present != cf->present) {
 | |
| 			cf->present = present;
 | |
| 			pr_debug("%s: card %s\n", driver_name,
 | |
| 					present ? "present" : "gone");
 | |
| 			pcmcia_parse_events(&cf->socket, SS_DETECT);
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	return IRQ_HANDLED;
 | |
| }
 | |
| 
 | |
| static int at91_cf_get_status(struct pcmcia_socket *s, u_int *sp)
 | |
| {
 | |
| 	struct at91_cf_socket	*cf;
 | |
| 
 | |
| 	if (!sp)
 | |
| 		return -EINVAL;
 | |
| 
 | |
| 	cf = container_of(s, struct at91_cf_socket, socket);
 | |
| 
 | |
| 	/* NOTE: CF is always 3VCARD */
 | |
| 	if (at91_cf_present(cf)) {
 | |
| 		int rdy	= cf->board->irq_pin;	/* RDY/nIRQ */
 | |
| 		int vcc	= cf->board->vcc_pin;
 | |
| 
 | |
| 		*sp = SS_DETECT | SS_3VCARD;
 | |
| 		if (!rdy || gpio_get_value(rdy))
 | |
| 			*sp |= SS_READY;
 | |
| 		if (!vcc || gpio_get_value(vcc))
 | |
| 			*sp |= SS_POWERON;
 | |
| 	} else
 | |
| 		*sp = 0;
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int
 | |
| at91_cf_set_socket(struct pcmcia_socket *sock, struct socket_state_t *s)
 | |
| {
 | |
| 	struct at91_cf_socket	*cf;
 | |
| 
 | |
| 	cf = container_of(sock, struct at91_cf_socket, socket);
 | |
| 
 | |
| 	/* switch Vcc if needed and possible */
 | |
| 	if (cf->board->vcc_pin) {
 | |
| 		switch (s->Vcc) {
 | |
| 			case 0:
 | |
| 				gpio_set_value(cf->board->vcc_pin, 0);
 | |
| 				break;
 | |
| 			case 33:
 | |
| 				gpio_set_value(cf->board->vcc_pin, 1);
 | |
| 				break;
 | |
| 			default:
 | |
| 				return -EINVAL;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	/* toggle reset if needed */
 | |
| 	gpio_set_value(cf->board->rst_pin, s->flags & SS_RESET);
 | |
| 
 | |
| 	pr_debug("%s: Vcc %d, io_irq %d, flags %04x csc %04x\n",
 | |
| 		driver_name, s->Vcc, s->io_irq, s->flags, s->csc_mask);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int at91_cf_ss_suspend(struct pcmcia_socket *s)
 | |
| {
 | |
| 	return at91_cf_set_socket(s, &dead_socket);
 | |
| }
 | |
| 
 | |
| /* we already mapped the I/O region */
 | |
| static int at91_cf_set_io_map(struct pcmcia_socket *s, struct pccard_io_map *io)
 | |
| {
 | |
| 	struct at91_cf_socket	*cf;
 | |
| 	u32			csr;
 | |
| 
 | |
| 	cf = container_of(s, struct at91_cf_socket, socket);
 | |
| 	io->flags &= (MAP_ACTIVE | MAP_16BIT | MAP_AUTOSZ);
 | |
| 
 | |
| 	/*
 | |
| 	 * Use 16 bit accesses unless/until we need 8-bit i/o space.
 | |
| 	 */
 | |
| 	csr = at91_sys_read(AT91_SMC_CSR(cf->board->chipselect)) & ~AT91_SMC_DBW;
 | |
| 
 | |
| 	/*
 | |
| 	 * NOTE: this CF controller ignores IOIS16, so we can't really do
 | |
| 	 * MAP_AUTOSZ.  The 16bit mode allows single byte access on either
 | |
| 	 * D0-D7 (even addr) or D8-D15 (odd), so it's close enough for many
 | |
| 	 * purposes (and handles ide-cs).
 | |
| 	 *
 | |
| 	 * The 8bit mode is needed for odd byte access on D0-D7.  It seems
 | |
| 	 * some cards only like that way to get at the odd byte, despite
 | |
| 	 * CF 3.0 spec table 35 also giving the D8-D15 option.
 | |
| 	 */
 | |
| 	if (!(io->flags & (MAP_16BIT | MAP_AUTOSZ))) {
 | |
| 		csr |= AT91_SMC_DBW_8;
 | |
| 		pr_debug("%s: 8bit i/o bus\n", driver_name);
 | |
| 	} else {
 | |
| 		csr |= AT91_SMC_DBW_16;
 | |
| 		pr_debug("%s: 16bit i/o bus\n", driver_name);
 | |
| 	}
 | |
| 	at91_sys_write(AT91_SMC_CSR(cf->board->chipselect), csr);
 | |
| 
 | |
| 	io->start = cf->socket.io_offset;
 | |
| 	io->stop = io->start + SZ_2K - 1;
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| /* pcmcia layer maps/unmaps mem regions */
 | |
| static int
 | |
| at91_cf_set_mem_map(struct pcmcia_socket *s, struct pccard_mem_map *map)
 | |
| {
 | |
| 	struct at91_cf_socket	*cf;
 | |
| 
 | |
| 	if (map->card_start)
 | |
| 		return -EINVAL;
 | |
| 
 | |
| 	cf = container_of(s, struct at91_cf_socket, socket);
 | |
| 
 | |
| 	map->flags &= (MAP_ACTIVE | MAP_ATTRIB | MAP_16BIT);
 | |
| 	if (map->flags & MAP_ATTRIB)
 | |
| 		map->static_start = cf->phys_baseaddr + CF_ATTR_PHYS;
 | |
| 	else
 | |
| 		map->static_start = cf->phys_baseaddr + CF_MEM_PHYS;
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static struct pccard_operations at91_cf_ops = {
 | |
| 	.init			= at91_cf_ss_init,
 | |
| 	.suspend		= at91_cf_ss_suspend,
 | |
| 	.get_status		= at91_cf_get_status,
 | |
| 	.set_socket		= at91_cf_set_socket,
 | |
| 	.set_io_map		= at91_cf_set_io_map,
 | |
| 	.set_mem_map		= at91_cf_set_mem_map,
 | |
| };
 | |
| 
 | |
| /*--------------------------------------------------------------------------*/
 | |
| 
 | |
| static int __init at91_cf_probe(struct platform_device *pdev)
 | |
| {
 | |
| 	struct at91_cf_socket	*cf;
 | |
| 	struct at91_cf_data	*board = pdev->dev.platform_data;
 | |
| 	struct resource		*io;
 | |
| 	int			status;
 | |
| 
 | |
| 	if (!board || !board->det_pin || !board->rst_pin)
 | |
| 		return -ENODEV;
 | |
| 
 | |
| 	io = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 | |
| 	if (!io)
 | |
| 		return -ENODEV;
 | |
| 
 | |
| 	cf = kzalloc(sizeof *cf, GFP_KERNEL);
 | |
| 	if (!cf)
 | |
| 		return -ENOMEM;
 | |
| 
 | |
| 	cf->board = board;
 | |
| 	cf->pdev = pdev;
 | |
| 	cf->phys_baseaddr = io->start;
 | |
| 	platform_set_drvdata(pdev, cf);
 | |
| 
 | |
| 	/* must be a GPIO; ergo must trigger on both edges */
 | |
| 	status = gpio_request(board->det_pin, "cf_det");
 | |
| 	if (status < 0)
 | |
| 		goto fail0;
 | |
| 	status = request_irq(board->det_pin, at91_cf_irq, 0, driver_name, cf);
 | |
| 	if (status < 0)
 | |
| 		goto fail00;
 | |
| 	device_init_wakeup(&pdev->dev, 1);
 | |
| 
 | |
| 	status = gpio_request(board->rst_pin, "cf_rst");
 | |
| 	if (status < 0)
 | |
| 		goto fail0a;
 | |
| 
 | |
| 	if (board->vcc_pin) {
 | |
| 		status = gpio_request(board->vcc_pin, "cf_vcc");
 | |
| 		if (status < 0)
 | |
| 			goto fail0b;
 | |
| 	}
 | |
| 
 | |
| 	/*
 | |
| 	 * The card driver will request this irq later as needed.
 | |
| 	 * but it causes lots of "irqNN: nobody cared" messages
 | |
| 	 * unless we report that we handle everything (sigh).
 | |
| 	 * (Note:  DK board doesn't wire the IRQ pin...)
 | |
| 	 */
 | |
| 	if (board->irq_pin) {
 | |
| 		status = gpio_request(board->irq_pin, "cf_irq");
 | |
| 		if (status < 0)
 | |
| 			goto fail0c;
 | |
| 		status = request_irq(board->irq_pin, at91_cf_irq,
 | |
| 				IRQF_SHARED, driver_name, cf);
 | |
| 		if (status < 0)
 | |
| 			goto fail0d;
 | |
| 		cf->socket.pci_irq = board->irq_pin;
 | |
| 	} else
 | |
| 		cf->socket.pci_irq = nr_irqs + 1;
 | |
| 
 | |
| 	/* pcmcia layer only remaps "real" memory not iospace */
 | |
| 	cf->socket.io_offset = (unsigned long)
 | |
| 			ioremap(cf->phys_baseaddr + CF_IO_PHYS, SZ_2K);
 | |
| 	if (!cf->socket.io_offset) {
 | |
| 		status = -ENXIO;
 | |
| 		goto fail1;
 | |
| 	}
 | |
| 
 | |
| 	/* reserve chip-select regions */
 | |
| 	if (!request_mem_region(io->start, io->end + 1 - io->start,
 | |
| 				driver_name)) {
 | |
| 		status = -ENXIO;
 | |
| 		goto fail1;
 | |
| 	}
 | |
| 
 | |
| 	pr_info("%s: irqs det #%d, io #%d\n", driver_name,
 | |
| 		board->det_pin, board->irq_pin);
 | |
| 
 | |
| 	cf->socket.owner = THIS_MODULE;
 | |
| 	cf->socket.dev.parent = &pdev->dev;
 | |
| 	cf->socket.ops = &at91_cf_ops;
 | |
| 	cf->socket.resource_ops = &pccard_static_ops;
 | |
| 	cf->socket.features = SS_CAP_PCCARD | SS_CAP_STATIC_MAP
 | |
| 				| SS_CAP_MEM_ALIGN;
 | |
| 	cf->socket.map_size = SZ_2K;
 | |
| 	cf->socket.io[0].res = io;
 | |
| 
 | |
| 	status = pcmcia_register_socket(&cf->socket);
 | |
| 	if (status < 0)
 | |
| 		goto fail2;
 | |
| 
 | |
| 	return 0;
 | |
| 
 | |
| fail2:
 | |
| 	release_mem_region(io->start, io->end + 1 - io->start);
 | |
| fail1:
 | |
| 	if (cf->socket.io_offset)
 | |
| 		iounmap((void __iomem *) cf->socket.io_offset);
 | |
| 	if (board->irq_pin) {
 | |
| 		free_irq(board->irq_pin, cf);
 | |
| fail0d:
 | |
| 		gpio_free(board->irq_pin);
 | |
| 	}
 | |
| fail0c:
 | |
| 	if (board->vcc_pin)
 | |
| 		gpio_free(board->vcc_pin);
 | |
| fail0b:
 | |
| 	gpio_free(board->rst_pin);
 | |
| fail0a:
 | |
| 	device_init_wakeup(&pdev->dev, 0);
 | |
| 	free_irq(board->det_pin, cf);
 | |
| fail00:
 | |
| 	gpio_free(board->det_pin);
 | |
| fail0:
 | |
| 	kfree(cf);
 | |
| 	return status;
 | |
| }
 | |
| 
 | |
| static int __exit at91_cf_remove(struct platform_device *pdev)
 | |
| {
 | |
| 	struct at91_cf_socket	*cf = platform_get_drvdata(pdev);
 | |
| 	struct at91_cf_data	*board = cf->board;
 | |
| 	struct resource		*io = cf->socket.io[0].res;
 | |
| 
 | |
| 	pcmcia_unregister_socket(&cf->socket);
 | |
| 	release_mem_region(io->start, io->end + 1 - io->start);
 | |
| 	iounmap((void __iomem *) cf->socket.io_offset);
 | |
| 	if (board->irq_pin) {
 | |
| 		free_irq(board->irq_pin, cf);
 | |
| 		gpio_free(board->irq_pin);
 | |
| 	}
 | |
| 	if (board->vcc_pin)
 | |
| 		gpio_free(board->vcc_pin);
 | |
| 	gpio_free(board->rst_pin);
 | |
| 	device_init_wakeup(&pdev->dev, 0);
 | |
| 	free_irq(board->det_pin, cf);
 | |
| 	gpio_free(board->det_pin);
 | |
| 	kfree(cf);
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| #ifdef	CONFIG_PM
 | |
| 
 | |
| static int at91_cf_suspend(struct platform_device *pdev, pm_message_t mesg)
 | |
| {
 | |
| 	struct at91_cf_socket	*cf = platform_get_drvdata(pdev);
 | |
| 	struct at91_cf_data	*board = cf->board;
 | |
| 
 | |
| 	pcmcia_socket_dev_suspend(&pdev->dev, mesg);
 | |
| 	if (device_may_wakeup(&pdev->dev)) {
 | |
| 		enable_irq_wake(board->det_pin);
 | |
| 		if (board->irq_pin)
 | |
| 			enable_irq_wake(board->irq_pin);
 | |
| 	}
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int at91_cf_resume(struct platform_device *pdev)
 | |
| {
 | |
| 	struct at91_cf_socket	*cf = platform_get_drvdata(pdev);
 | |
| 	struct at91_cf_data	*board = cf->board;
 | |
| 
 | |
| 	if (device_may_wakeup(&pdev->dev)) {
 | |
| 		disable_irq_wake(board->det_pin);
 | |
| 		if (board->irq_pin)
 | |
| 			disable_irq_wake(board->irq_pin);
 | |
| 	}
 | |
| 
 | |
| 	pcmcia_socket_dev_resume(&pdev->dev);
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| #else
 | |
| #define	at91_cf_suspend		NULL
 | |
| #define	at91_cf_resume		NULL
 | |
| #endif
 | |
| 
 | |
| static struct platform_driver at91_cf_driver = {
 | |
| 	.driver = {
 | |
| 		.name		= (char *) driver_name,
 | |
| 		.owner		= THIS_MODULE,
 | |
| 	},
 | |
| 	.remove		= __exit_p(at91_cf_remove),
 | |
| 	.suspend	= at91_cf_suspend,
 | |
| 	.resume		= at91_cf_resume,
 | |
| };
 | |
| 
 | |
| /*--------------------------------------------------------------------------*/
 | |
| 
 | |
| static int __init at91_cf_init(void)
 | |
| {
 | |
| 	return platform_driver_probe(&at91_cf_driver, at91_cf_probe);
 | |
| }
 | |
| module_init(at91_cf_init);
 | |
| 
 | |
| static void __exit at91_cf_exit(void)
 | |
| {
 | |
| 	platform_driver_unregister(&at91_cf_driver);
 | |
| }
 | |
| module_exit(at91_cf_exit);
 | |
| 
 | |
| MODULE_DESCRIPTION("AT91 Compact Flash Driver");
 | |
| MODULE_AUTHOR("David Brownell");
 | |
| MODULE_LICENSE("GPL");
 | |
| MODULE_ALIAS("platform:at91_cf");
 |