 3396c7823e
			
		
	
	
	3396c7823e
	
	
	
		
			
			The reorganization of the driver layout in drivers/net left behind some stale paths in comments and in Kconfig help text. Bring them up to date. No actual change to any code takes place here. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> CC: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
		
			
				
	
	
		
			541 lines
		
	
	
	
		
			12 KiB
			
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			541 lines
		
	
	
	
		
			12 KiB
			
		
	
	
	
		
			C
		
	
	
	
	
	
| /*
 | |
|  * drivers/net/ethernet/ibm/emac/phy.c
 | |
|  *
 | |
|  * Driver for PowerPC 4xx on-chip ethernet controller, PHY support.
 | |
|  * Borrowed from sungem_phy.c, though I only kept the generic MII
 | |
|  * driver for now.
 | |
|  *
 | |
|  * This file should be shared with other drivers or eventually
 | |
|  * merged as the "low level" part of miilib
 | |
|  *
 | |
|  * Copyright 2007 Benjamin Herrenschmidt, IBM Corp.
 | |
|  *                <benh@kernel.crashing.org>
 | |
|  *
 | |
|  * Based on the arch/ppc version of the driver:
 | |
|  *
 | |
|  * (c) 2003, Benjamin Herrenscmidt (benh@kernel.crashing.org)
 | |
|  * (c) 2004-2005, Eugene Surovegin <ebs@ebshome.net>
 | |
|  *
 | |
|  */
 | |
| #include <linux/module.h>
 | |
| #include <linux/kernel.h>
 | |
| #include <linux/types.h>
 | |
| #include <linux/netdevice.h>
 | |
| #include <linux/mii.h>
 | |
| #include <linux/ethtool.h>
 | |
| #include <linux/delay.h>
 | |
| 
 | |
| #include "emac.h"
 | |
| #include "phy.h"
 | |
| 
 | |
| #define phy_read _phy_read
 | |
| #define phy_write _phy_write
 | |
| 
 | |
| static inline int _phy_read(struct mii_phy *phy, int reg)
 | |
| {
 | |
| 	return phy->mdio_read(phy->dev, phy->address, reg);
 | |
| }
 | |
| 
 | |
| static inline void _phy_write(struct mii_phy *phy, int reg, int val)
 | |
| {
 | |
| 	phy->mdio_write(phy->dev, phy->address, reg, val);
 | |
| }
 | |
| 
 | |
| static inline int gpcs_phy_read(struct mii_phy *phy, int reg)
 | |
| {
 | |
| 	return phy->mdio_read(phy->dev, phy->gpcs_address, reg);
 | |
| }
 | |
| 
 | |
| static inline void gpcs_phy_write(struct mii_phy *phy, int reg, int val)
 | |
| {
 | |
| 	phy->mdio_write(phy->dev, phy->gpcs_address, reg, val);
 | |
| }
 | |
| 
 | |
| int emac_mii_reset_phy(struct mii_phy *phy)
 | |
| {
 | |
| 	int val;
 | |
| 	int limit = 10000;
 | |
| 
 | |
| 	val = phy_read(phy, MII_BMCR);
 | |
| 	val &= ~(BMCR_ISOLATE | BMCR_ANENABLE);
 | |
| 	val |= BMCR_RESET;
 | |
| 	phy_write(phy, MII_BMCR, val);
 | |
| 
 | |
| 	udelay(300);
 | |
| 
 | |
| 	while (--limit) {
 | |
| 		val = phy_read(phy, MII_BMCR);
 | |
| 		if (val >= 0 && (val & BMCR_RESET) == 0)
 | |
| 			break;
 | |
| 		udelay(10);
 | |
| 	}
 | |
| 	if ((val & BMCR_ISOLATE) && limit > 0)
 | |
| 		phy_write(phy, MII_BMCR, val & ~BMCR_ISOLATE);
 | |
| 
 | |
| 	return limit <= 0;
 | |
| }
 | |
| 
 | |
| int emac_mii_reset_gpcs(struct mii_phy *phy)
 | |
| {
 | |
| 	int val;
 | |
| 	int limit = 10000;
 | |
| 
 | |
| 	val = gpcs_phy_read(phy, MII_BMCR);
 | |
| 	val &= ~(BMCR_ISOLATE | BMCR_ANENABLE);
 | |
| 	val |= BMCR_RESET;
 | |
| 	gpcs_phy_write(phy, MII_BMCR, val);
 | |
| 
 | |
| 	udelay(300);
 | |
| 
 | |
| 	while (--limit) {
 | |
| 		val = gpcs_phy_read(phy, MII_BMCR);
 | |
| 		if (val >= 0 && (val & BMCR_RESET) == 0)
 | |
| 			break;
 | |
| 		udelay(10);
 | |
| 	}
 | |
| 	if ((val & BMCR_ISOLATE) && limit > 0)
 | |
| 		gpcs_phy_write(phy, MII_BMCR, val & ~BMCR_ISOLATE);
 | |
| 
 | |
| 	if (limit > 0 && phy->mode == PHY_MODE_SGMII) {
 | |
| 		/* Configure GPCS interface to recommended setting for SGMII */
 | |
| 		gpcs_phy_write(phy, 0x04, 0x8120); /* AsymPause, FDX */
 | |
| 		gpcs_phy_write(phy, 0x07, 0x2801); /* msg_pg, toggle */
 | |
| 		gpcs_phy_write(phy, 0x00, 0x0140); /* 1Gbps, FDX     */
 | |
| 	}
 | |
| 
 | |
| 	return limit <= 0;
 | |
| }
 | |
| 
 | |
| static int genmii_setup_aneg(struct mii_phy *phy, u32 advertise)
 | |
| {
 | |
| 	int ctl, adv;
 | |
| 
 | |
| 	phy->autoneg = AUTONEG_ENABLE;
 | |
| 	phy->speed = SPEED_10;
 | |
| 	phy->duplex = DUPLEX_HALF;
 | |
| 	phy->pause = phy->asym_pause = 0;
 | |
| 	phy->advertising = advertise;
 | |
| 
 | |
| 	ctl = phy_read(phy, MII_BMCR);
 | |
| 	if (ctl < 0)
 | |
| 		return ctl;
 | |
| 	ctl &= ~(BMCR_FULLDPLX | BMCR_SPEED100 | BMCR_SPEED1000 | BMCR_ANENABLE);
 | |
| 
 | |
| 	/* First clear the PHY */
 | |
| 	phy_write(phy, MII_BMCR, ctl);
 | |
| 
 | |
| 	/* Setup standard advertise */
 | |
| 	adv = phy_read(phy, MII_ADVERTISE);
 | |
| 	if (adv < 0)
 | |
| 		return adv;
 | |
| 	adv &= ~(ADVERTISE_ALL | ADVERTISE_100BASE4 | ADVERTISE_PAUSE_CAP |
 | |
| 		 ADVERTISE_PAUSE_ASYM);
 | |
| 	if (advertise & ADVERTISED_10baseT_Half)
 | |
| 		adv |= ADVERTISE_10HALF;
 | |
| 	if (advertise & ADVERTISED_10baseT_Full)
 | |
| 		adv |= ADVERTISE_10FULL;
 | |
| 	if (advertise & ADVERTISED_100baseT_Half)
 | |
| 		adv |= ADVERTISE_100HALF;
 | |
| 	if (advertise & ADVERTISED_100baseT_Full)
 | |
| 		adv |= ADVERTISE_100FULL;
 | |
| 	if (advertise & ADVERTISED_Pause)
 | |
| 		adv |= ADVERTISE_PAUSE_CAP;
 | |
| 	if (advertise & ADVERTISED_Asym_Pause)
 | |
| 		adv |= ADVERTISE_PAUSE_ASYM;
 | |
| 	phy_write(phy, MII_ADVERTISE, adv);
 | |
| 
 | |
| 	if (phy->features &
 | |
| 	    (SUPPORTED_1000baseT_Full | SUPPORTED_1000baseT_Half)) {
 | |
| 		adv = phy_read(phy, MII_CTRL1000);
 | |
| 		if (adv < 0)
 | |
| 			return adv;
 | |
| 		adv &= ~(ADVERTISE_1000FULL | ADVERTISE_1000HALF);
 | |
| 		if (advertise & ADVERTISED_1000baseT_Full)
 | |
| 			adv |= ADVERTISE_1000FULL;
 | |
| 		if (advertise & ADVERTISED_1000baseT_Half)
 | |
| 			adv |= ADVERTISE_1000HALF;
 | |
| 		phy_write(phy, MII_CTRL1000, adv);
 | |
| 	}
 | |
| 
 | |
| 	/* Start/Restart aneg */
 | |
| 	ctl = phy_read(phy, MII_BMCR);
 | |
| 	ctl |= (BMCR_ANENABLE | BMCR_ANRESTART);
 | |
| 	phy_write(phy, MII_BMCR, ctl);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int genmii_setup_forced(struct mii_phy *phy, int speed, int fd)
 | |
| {
 | |
| 	int ctl;
 | |
| 
 | |
| 	phy->autoneg = AUTONEG_DISABLE;
 | |
| 	phy->speed = speed;
 | |
| 	phy->duplex = fd;
 | |
| 	phy->pause = phy->asym_pause = 0;
 | |
| 
 | |
| 	ctl = phy_read(phy, MII_BMCR);
 | |
| 	if (ctl < 0)
 | |
| 		return ctl;
 | |
| 	ctl &= ~(BMCR_FULLDPLX | BMCR_SPEED100 | BMCR_SPEED1000 | BMCR_ANENABLE);
 | |
| 
 | |
| 	/* First clear the PHY */
 | |
| 	phy_write(phy, MII_BMCR, ctl | BMCR_RESET);
 | |
| 
 | |
| 	/* Select speed & duplex */
 | |
| 	switch (speed) {
 | |
| 	case SPEED_10:
 | |
| 		break;
 | |
| 	case SPEED_100:
 | |
| 		ctl |= BMCR_SPEED100;
 | |
| 		break;
 | |
| 	case SPEED_1000:
 | |
| 		ctl |= BMCR_SPEED1000;
 | |
| 		break;
 | |
| 	default:
 | |
| 		return -EINVAL;
 | |
| 	}
 | |
| 	if (fd == DUPLEX_FULL)
 | |
| 		ctl |= BMCR_FULLDPLX;
 | |
| 	phy_write(phy, MII_BMCR, ctl);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int genmii_poll_link(struct mii_phy *phy)
 | |
| {
 | |
| 	int status;
 | |
| 
 | |
| 	/* Clear latched value with dummy read */
 | |
| 	phy_read(phy, MII_BMSR);
 | |
| 	status = phy_read(phy, MII_BMSR);
 | |
| 	if (status < 0 || (status & BMSR_LSTATUS) == 0)
 | |
| 		return 0;
 | |
| 	if (phy->autoneg == AUTONEG_ENABLE && !(status & BMSR_ANEGCOMPLETE))
 | |
| 		return 0;
 | |
| 	return 1;
 | |
| }
 | |
| 
 | |
| static int genmii_read_link(struct mii_phy *phy)
 | |
| {
 | |
| 	if (phy->autoneg == AUTONEG_ENABLE) {
 | |
| 		int glpa = 0;
 | |
| 		int lpa = phy_read(phy, MII_LPA) & phy_read(phy, MII_ADVERTISE);
 | |
| 		if (lpa < 0)
 | |
| 			return lpa;
 | |
| 
 | |
| 		if (phy->features &
 | |
| 		    (SUPPORTED_1000baseT_Full | SUPPORTED_1000baseT_Half)) {
 | |
| 			int adv = phy_read(phy, MII_CTRL1000);
 | |
| 			glpa = phy_read(phy, MII_STAT1000);
 | |
| 
 | |
| 			if (glpa < 0 || adv < 0)
 | |
| 				return adv;
 | |
| 
 | |
| 			glpa &= adv << 2;
 | |
| 		}
 | |
| 
 | |
| 		phy->speed = SPEED_10;
 | |
| 		phy->duplex = DUPLEX_HALF;
 | |
| 		phy->pause = phy->asym_pause = 0;
 | |
| 
 | |
| 		if (glpa & (LPA_1000FULL | LPA_1000HALF)) {
 | |
| 			phy->speed = SPEED_1000;
 | |
| 			if (glpa & LPA_1000FULL)
 | |
| 				phy->duplex = DUPLEX_FULL;
 | |
| 		} else if (lpa & (LPA_100FULL | LPA_100HALF)) {
 | |
| 			phy->speed = SPEED_100;
 | |
| 			if (lpa & LPA_100FULL)
 | |
| 				phy->duplex = DUPLEX_FULL;
 | |
| 		} else if (lpa & LPA_10FULL)
 | |
| 			phy->duplex = DUPLEX_FULL;
 | |
| 
 | |
| 		if (phy->duplex == DUPLEX_FULL) {
 | |
| 			phy->pause = lpa & LPA_PAUSE_CAP ? 1 : 0;
 | |
| 			phy->asym_pause = lpa & LPA_PAUSE_ASYM ? 1 : 0;
 | |
| 		}
 | |
| 	} else {
 | |
| 		int bmcr = phy_read(phy, MII_BMCR);
 | |
| 		if (bmcr < 0)
 | |
| 			return bmcr;
 | |
| 
 | |
| 		if (bmcr & BMCR_FULLDPLX)
 | |
| 			phy->duplex = DUPLEX_FULL;
 | |
| 		else
 | |
| 			phy->duplex = DUPLEX_HALF;
 | |
| 		if (bmcr & BMCR_SPEED1000)
 | |
| 			phy->speed = SPEED_1000;
 | |
| 		else if (bmcr & BMCR_SPEED100)
 | |
| 			phy->speed = SPEED_100;
 | |
| 		else
 | |
| 			phy->speed = SPEED_10;
 | |
| 
 | |
| 		phy->pause = phy->asym_pause = 0;
 | |
| 	}
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| /* Generic implementation for most 10/100/1000 PHYs */
 | |
| static struct mii_phy_ops generic_phy_ops = {
 | |
| 	.setup_aneg	= genmii_setup_aneg,
 | |
| 	.setup_forced	= genmii_setup_forced,
 | |
| 	.poll_link	= genmii_poll_link,
 | |
| 	.read_link	= genmii_read_link
 | |
| };
 | |
| 
 | |
| static struct mii_phy_def genmii_phy_def = {
 | |
| 	.phy_id		= 0x00000000,
 | |
| 	.phy_id_mask	= 0x00000000,
 | |
| 	.name		= "Generic MII",
 | |
| 	.ops		= &generic_phy_ops
 | |
| };
 | |
| 
 | |
| /* CIS8201 */
 | |
| #define MII_CIS8201_10BTCSR	0x16
 | |
| #define  TENBTCSR_ECHO_DISABLE	0x2000
 | |
| #define MII_CIS8201_EPCR	0x17
 | |
| #define  EPCR_MODE_MASK		0x3000
 | |
| #define  EPCR_GMII_MODE		0x0000
 | |
| #define  EPCR_RGMII_MODE	0x1000
 | |
| #define  EPCR_TBI_MODE		0x2000
 | |
| #define  EPCR_RTBI_MODE		0x3000
 | |
| #define MII_CIS8201_ACSR	0x1c
 | |
| #define  ACSR_PIN_PRIO_SELECT	0x0004
 | |
| 
 | |
| static int cis8201_init(struct mii_phy *phy)
 | |
| {
 | |
| 	int epcr;
 | |
| 
 | |
| 	epcr = phy_read(phy, MII_CIS8201_EPCR);
 | |
| 	if (epcr < 0)
 | |
| 		return epcr;
 | |
| 
 | |
| 	epcr &= ~EPCR_MODE_MASK;
 | |
| 
 | |
| 	switch (phy->mode) {
 | |
| 	case PHY_MODE_TBI:
 | |
| 		epcr |= EPCR_TBI_MODE;
 | |
| 		break;
 | |
| 	case PHY_MODE_RTBI:
 | |
| 		epcr |= EPCR_RTBI_MODE;
 | |
| 		break;
 | |
| 	case PHY_MODE_GMII:
 | |
| 		epcr |= EPCR_GMII_MODE;
 | |
| 		break;
 | |
| 	case PHY_MODE_RGMII:
 | |
| 	default:
 | |
| 		epcr |= EPCR_RGMII_MODE;
 | |
| 	}
 | |
| 
 | |
| 	phy_write(phy, MII_CIS8201_EPCR, epcr);
 | |
| 
 | |
| 	/* MII regs override strap pins */
 | |
| 	phy_write(phy, MII_CIS8201_ACSR,
 | |
| 		  phy_read(phy, MII_CIS8201_ACSR) | ACSR_PIN_PRIO_SELECT);
 | |
| 
 | |
| 	/* Disable TX_EN -> CRS echo mode, otherwise 10/HDX doesn't work */
 | |
| 	phy_write(phy, MII_CIS8201_10BTCSR,
 | |
| 		  phy_read(phy, MII_CIS8201_10BTCSR) | TENBTCSR_ECHO_DISABLE);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static struct mii_phy_ops cis8201_phy_ops = {
 | |
| 	.init		= cis8201_init,
 | |
| 	.setup_aneg	= genmii_setup_aneg,
 | |
| 	.setup_forced	= genmii_setup_forced,
 | |
| 	.poll_link	= genmii_poll_link,
 | |
| 	.read_link	= genmii_read_link
 | |
| };
 | |
| 
 | |
| static struct mii_phy_def cis8201_phy_def = {
 | |
| 	.phy_id		= 0x000fc410,
 | |
| 	.phy_id_mask	= 0x000ffff0,
 | |
| 	.name		= "CIS8201 Gigabit Ethernet",
 | |
| 	.ops		= &cis8201_phy_ops
 | |
| };
 | |
| 
 | |
| static struct mii_phy_def bcm5248_phy_def = {
 | |
| 
 | |
| 	.phy_id		= 0x0143bc00,
 | |
| 	.phy_id_mask	= 0x0ffffff0,
 | |
| 	.name		= "BCM5248 10/100 SMII Ethernet",
 | |
| 	.ops		= &generic_phy_ops
 | |
| };
 | |
| 
 | |
| static int m88e1111_init(struct mii_phy *phy)
 | |
| {
 | |
| 	pr_debug("%s: Marvell 88E1111 Ethernet\n", __func__);
 | |
| 	phy_write(phy, 0x14, 0x0ce3);
 | |
| 	phy_write(phy, 0x18, 0x4101);
 | |
| 	phy_write(phy, 0x09, 0x0e00);
 | |
| 	phy_write(phy, 0x04, 0x01e1);
 | |
| 	phy_write(phy, 0x00, 0x9140);
 | |
| 	phy_write(phy, 0x00, 0x1140);
 | |
| 
 | |
| 	return  0;
 | |
| }
 | |
| 
 | |
| static int m88e1112_init(struct mii_phy *phy)
 | |
| {
 | |
| 	/*
 | |
| 	 * Marvell 88E1112 PHY needs to have the SGMII MAC
 | |
| 	 * interace (page 2) properly configured to
 | |
| 	 * communicate with the 460EX/GT GPCS interface.
 | |
| 	 */
 | |
| 
 | |
| 	u16 reg_short;
 | |
| 
 | |
| 	pr_debug("%s: Marvell 88E1112 Ethernet\n", __func__);
 | |
| 
 | |
| 	/* Set access to Page 2 */
 | |
| 	phy_write(phy, 0x16, 0x0002);
 | |
| 
 | |
| 	phy_write(phy, 0x00, 0x0040); /* 1Gbps */
 | |
| 	reg_short = (u16)(phy_read(phy, 0x1a));
 | |
| 	reg_short |= 0x8000; /* bypass Auto-Negotiation */
 | |
| 	phy_write(phy, 0x1a, reg_short);
 | |
| 	emac_mii_reset_phy(phy); /* reset MAC interface */
 | |
| 
 | |
| 	/* Reset access to Page 0 */
 | |
| 	phy_write(phy, 0x16, 0x0000);
 | |
| 
 | |
| 	return  0;
 | |
| }
 | |
| 
 | |
| static int et1011c_init(struct mii_phy *phy)
 | |
| {
 | |
| 	u16 reg_short;
 | |
| 
 | |
| 	reg_short = (u16)(phy_read(phy, 0x16));
 | |
| 	reg_short &= ~(0x7);
 | |
| 	reg_short |= 0x6;	/* RGMII Trace Delay*/
 | |
| 	phy_write(phy, 0x16, reg_short);
 | |
| 
 | |
| 	reg_short = (u16)(phy_read(phy, 0x17));
 | |
| 	reg_short &= ~(0x40);
 | |
| 	phy_write(phy, 0x17, reg_short);
 | |
| 
 | |
| 	phy_write(phy, 0x1c, 0x74f0);
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static struct mii_phy_ops et1011c_phy_ops = {
 | |
| 	.init		= et1011c_init,
 | |
| 	.setup_aneg	= genmii_setup_aneg,
 | |
| 	.setup_forced	= genmii_setup_forced,
 | |
| 	.poll_link	= genmii_poll_link,
 | |
| 	.read_link	= genmii_read_link
 | |
| };
 | |
| 
 | |
| static struct mii_phy_def et1011c_phy_def = {
 | |
| 	.phy_id		= 0x0282f000,
 | |
| 	.phy_id_mask	= 0x0fffff00,
 | |
| 	.name		= "ET1011C Gigabit Ethernet",
 | |
| 	.ops		= &et1011c_phy_ops
 | |
| };
 | |
| 
 | |
| 
 | |
| 
 | |
| 
 | |
| 
 | |
| static struct mii_phy_ops m88e1111_phy_ops = {
 | |
| 	.init		= m88e1111_init,
 | |
| 	.setup_aneg	= genmii_setup_aneg,
 | |
| 	.setup_forced	= genmii_setup_forced,
 | |
| 	.poll_link	= genmii_poll_link,
 | |
| 	.read_link	= genmii_read_link
 | |
| };
 | |
| 
 | |
| static struct mii_phy_def m88e1111_phy_def = {
 | |
| 
 | |
| 	.phy_id		= 0x01410CC0,
 | |
| 	.phy_id_mask	= 0x0ffffff0,
 | |
| 	.name		= "Marvell 88E1111 Ethernet",
 | |
| 	.ops		= &m88e1111_phy_ops,
 | |
| };
 | |
| 
 | |
| static struct mii_phy_ops m88e1112_phy_ops = {
 | |
| 	.init		= m88e1112_init,
 | |
| 	.setup_aneg	= genmii_setup_aneg,
 | |
| 	.setup_forced	= genmii_setup_forced,
 | |
| 	.poll_link	= genmii_poll_link,
 | |
| 	.read_link	= genmii_read_link
 | |
| };
 | |
| 
 | |
| static struct mii_phy_def m88e1112_phy_def = {
 | |
| 	.phy_id		= 0x01410C90,
 | |
| 	.phy_id_mask	= 0x0ffffff0,
 | |
| 	.name		= "Marvell 88E1112 Ethernet",
 | |
| 	.ops		= &m88e1112_phy_ops,
 | |
| };
 | |
| 
 | |
| static struct mii_phy_def *mii_phy_table[] = {
 | |
| 	&et1011c_phy_def,
 | |
| 	&cis8201_phy_def,
 | |
| 	&bcm5248_phy_def,
 | |
| 	&m88e1111_phy_def,
 | |
| 	&m88e1112_phy_def,
 | |
| 	&genmii_phy_def,
 | |
| 	NULL
 | |
| };
 | |
| 
 | |
| int emac_mii_phy_probe(struct mii_phy *phy, int address)
 | |
| {
 | |
| 	struct mii_phy_def *def;
 | |
| 	int i;
 | |
| 	u32 id;
 | |
| 
 | |
| 	phy->autoneg = AUTONEG_DISABLE;
 | |
| 	phy->advertising = 0;
 | |
| 	phy->address = address;
 | |
| 	phy->speed = SPEED_10;
 | |
| 	phy->duplex = DUPLEX_HALF;
 | |
| 	phy->pause = phy->asym_pause = 0;
 | |
| 
 | |
| 	/* Take PHY out of isolate mode and reset it. */
 | |
| 	if (emac_mii_reset_phy(phy))
 | |
| 		return -ENODEV;
 | |
| 
 | |
| 	/* Read ID and find matching entry */
 | |
| 	id = (phy_read(phy, MII_PHYSID1) << 16) | phy_read(phy, MII_PHYSID2);
 | |
| 	for (i = 0; (def = mii_phy_table[i]) != NULL; i++)
 | |
| 		if ((id & def->phy_id_mask) == def->phy_id)
 | |
| 			break;
 | |
| 	/* Should never be NULL (we have a generic entry), but... */
 | |
| 	if (!def)
 | |
| 		return -ENODEV;
 | |
| 
 | |
| 	phy->def = def;
 | |
| 
 | |
| 	/* Determine PHY features if needed */
 | |
| 	phy->features = def->features;
 | |
| 	if (!phy->features) {
 | |
| 		u16 bmsr = phy_read(phy, MII_BMSR);
 | |
| 		if (bmsr & BMSR_ANEGCAPABLE)
 | |
| 			phy->features |= SUPPORTED_Autoneg;
 | |
| 		if (bmsr & BMSR_10HALF)
 | |
| 			phy->features |= SUPPORTED_10baseT_Half;
 | |
| 		if (bmsr & BMSR_10FULL)
 | |
| 			phy->features |= SUPPORTED_10baseT_Full;
 | |
| 		if (bmsr & BMSR_100HALF)
 | |
| 			phy->features |= SUPPORTED_100baseT_Half;
 | |
| 		if (bmsr & BMSR_100FULL)
 | |
| 			phy->features |= SUPPORTED_100baseT_Full;
 | |
| 		if (bmsr & BMSR_ESTATEN) {
 | |
| 			u16 esr = phy_read(phy, MII_ESTATUS);
 | |
| 			if (esr & ESTATUS_1000_TFULL)
 | |
| 				phy->features |= SUPPORTED_1000baseT_Full;
 | |
| 			if (esr & ESTATUS_1000_THALF)
 | |
| 				phy->features |= SUPPORTED_1000baseT_Half;
 | |
| 		}
 | |
| 		phy->features |= SUPPORTED_MII;
 | |
| 	}
 | |
| 
 | |
| 	/* Setup default advertising */
 | |
| 	phy->advertising = phy->features;
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| MODULE_LICENSE("GPL");
 |