435699db6a
This patch cleans up arch/arm/mach-omap2/clkt_clksel.c. It: - makes several functions static that are not called outside the file; - adds documentation; - makes some code paths easier to read (hopefully), by breaking up compound statements and removing redundant checks; - converts some pr_err()s that indicate clock tree data problems into WARN()s, so they are more likely to be noticed; - and moves omap2_clk_round_rate() back into mach-omap2/clock.c, its proper home, since it is not clksel-specific. Signed-off-by: Paul Walmsley <paul@pwsan.com>
151 lines
4.8 KiB
C
151 lines
4.8 KiB
C
/*
|
|
* linux/arch/arm/mach-omap2/clock.h
|
|
*
|
|
* Copyright (C) 2005-2009 Texas Instruments, Inc.
|
|
* Copyright (C) 2004-2009 Nokia Corporation
|
|
*
|
|
* Contacts:
|
|
* Richard Woodruff <r-woodruff2@ti.com>
|
|
* Paul Walmsley
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK_H
|
|
#define __ARCH_ARM_MACH_OMAP2_CLOCK_H
|
|
|
|
#include <plat/clock.h>
|
|
|
|
/* The maximum error between a target DPLL rate and the rounded rate in Hz */
|
|
#define DEFAULT_DPLL_RATE_TOLERANCE 50000
|
|
|
|
/* CM_CLKSEL2_PLL.CORE_CLK_SRC bits (2XXX) */
|
|
#define CORE_CLK_SRC_32K 0x0
|
|
#define CORE_CLK_SRC_DPLL 0x1
|
|
#define CORE_CLK_SRC_DPLL_X2 0x2
|
|
|
|
/* OMAP2xxx CM_CLKEN_PLL.EN_DPLL bits - for omap2_get_dpll_rate() */
|
|
#define OMAP2XXX_EN_DPLL_LPBYPASS 0x1
|
|
#define OMAP2XXX_EN_DPLL_FRBYPASS 0x2
|
|
#define OMAP2XXX_EN_DPLL_LOCKED 0x3
|
|
|
|
/* OMAP3xxx CM_CLKEN_PLL*.EN_*_DPLL bits - for omap2_get_dpll_rate() */
|
|
#define OMAP3XXX_EN_DPLL_LPBYPASS 0x5
|
|
#define OMAP3XXX_EN_DPLL_FRBYPASS 0x6
|
|
#define OMAP3XXX_EN_DPLL_LOCKED 0x7
|
|
|
|
/* OMAP4xxx CM_CLKMODE_DPLL*.EN_*_DPLL bits - for omap2_get_dpll_rate() */
|
|
#define OMAP4XXX_EN_DPLL_MNBYPASS 0x4
|
|
#define OMAP4XXX_EN_DPLL_LPBYPASS 0x5
|
|
#define OMAP4XXX_EN_DPLL_FRBYPASS 0x6
|
|
#define OMAP4XXX_EN_DPLL_LOCKED 0x7
|
|
|
|
/* CM_CLKEN_PLL*.EN* bit values - not all are available for every DPLL */
|
|
#define DPLL_LOW_POWER_STOP 0x1
|
|
#define DPLL_LOW_POWER_BYPASS 0x5
|
|
#define DPLL_LOCKED 0x7
|
|
|
|
/* DPLL Type and DCO Selection Flags */
|
|
#define DPLL_J_TYPE 0x1
|
|
#define DPLL_NO_DCO_SEL 0x2
|
|
|
|
int omap2_clk_enable(struct clk *clk);
|
|
void omap2_clk_disable(struct clk *clk);
|
|
long omap2_clk_round_rate(struct clk *clk, unsigned long rate);
|
|
int omap2_clk_set_rate(struct clk *clk, unsigned long rate);
|
|
int omap2_clk_set_parent(struct clk *clk, struct clk *new_parent);
|
|
int omap2_dpll_set_rate_tolerance(struct clk *clk, unsigned int tolerance);
|
|
long omap2_dpll_round_rate(struct clk *clk, unsigned long target_rate);
|
|
unsigned long omap3_dpll_recalc(struct clk *clk);
|
|
unsigned long omap3_clkoutx2_recalc(struct clk *clk);
|
|
void omap3_dpll_allow_idle(struct clk *clk);
|
|
void omap3_dpll_deny_idle(struct clk *clk);
|
|
u32 omap3_dpll_autoidle_read(struct clk *clk);
|
|
int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned long rate);
|
|
int omap3_noncore_dpll_enable(struct clk *clk);
|
|
void omap3_noncore_dpll_disable(struct clk *clk);
|
|
|
|
#ifdef CONFIG_OMAP_RESET_CLOCKS
|
|
void omap2_clk_disable_unused(struct clk *clk);
|
|
#else
|
|
#define omap2_clk_disable_unused NULL
|
|
#endif
|
|
|
|
void omap2_init_clk_clkdm(struct clk *clk);
|
|
|
|
/* clkt_clksel.c public functions */
|
|
u32 omap2_clksel_round_rate_div(struct clk *clk, unsigned long target_rate,
|
|
u32 *new_div);
|
|
void omap2_init_clksel_parent(struct clk *clk);
|
|
unsigned long omap2_clksel_recalc(struct clk *clk);
|
|
long omap2_clksel_round_rate(struct clk *clk, unsigned long target_rate);
|
|
int omap2_clksel_set_rate(struct clk *clk, unsigned long rate);
|
|
int omap2_clksel_set_parent(struct clk *clk, struct clk *new_parent);
|
|
|
|
u32 omap2_get_dpll_rate(struct clk *clk);
|
|
void omap2_init_dpll_parent(struct clk *clk);
|
|
|
|
int omap2_wait_clock_ready(void __iomem *reg, u32 cval, const char *name);
|
|
|
|
|
|
#ifdef CONFIG_ARCH_OMAP2
|
|
void omap2xxx_clk_prepare_for_reboot(void);
|
|
#else
|
|
static inline void omap2xxx_clk_prepare_for_reboot(void)
|
|
{
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_ARCH_OMAP3
|
|
void omap3_clk_prepare_for_reboot(void);
|
|
#else
|
|
static inline void omap3_clk_prepare_for_reboot(void)
|
|
{
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_ARCH_OMAP4
|
|
void omap4_clk_prepare_for_reboot(void);
|
|
#else
|
|
static inline void omap4_clk_prepare_for_reboot(void)
|
|
{
|
|
}
|
|
#endif
|
|
|
|
int omap2_dflt_clk_enable(struct clk *clk);
|
|
void omap2_dflt_clk_disable(struct clk *clk);
|
|
void omap2_clk_dflt_find_companion(struct clk *clk, void __iomem **other_reg,
|
|
u8 *other_bit);
|
|
void omap2_clk_dflt_find_idlest(struct clk *clk, void __iomem **idlest_reg,
|
|
u8 *idlest_bit, u8 *idlest_val);
|
|
int omap2_clk_switch_mpurate_at_boot(const char *mpurate_ck_name);
|
|
void omap2_clk_print_new_rates(const char *hfclkin_ck_name,
|
|
const char *core_ck_name,
|
|
const char *mpu_ck_name);
|
|
|
|
extern u8 cpu_mask;
|
|
|
|
extern const struct clkops clkops_omap2_dflt_wait;
|
|
extern const struct clkops clkops_dummy;
|
|
extern const struct clkops clkops_omap2_dflt;
|
|
|
|
extern struct clk_functions omap2_clk_functions;
|
|
extern struct clk *vclk, *sclk;
|
|
|
|
extern const struct clksel_rate gpt_32k_rates[];
|
|
extern const struct clksel_rate gpt_sys_rates[];
|
|
extern const struct clksel_rate gfx_l3_rates[];
|
|
|
|
#if defined(CONFIG_ARCH_OMAP2) && defined(CONFIG_CPU_FREQ)
|
|
extern void omap2_clk_init_cpufreq_table(struct cpufreq_frequency_table **table);
|
|
extern void omap2_clk_exit_cpufreq_table(struct cpufreq_frequency_table **table);
|
|
#else
|
|
#define omap2_clk_init_cpufreq_table 0
|
|
#define omap2_clk_exit_cpufreq_table 0
|
|
#endif
|
|
|
|
extern const struct clkops clkops_omap3_noncore_dpll_ops;
|
|
|
|
#endif
|