 810b7e060c
			
		
	
	
	810b7e060c
	
	
	
		
			
			CONFIG_HOTPLUG is going away as an option so __devexit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
		
			
				
	
	
		
			439 lines
		
	
	
	
		
			9.8 KiB
			
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			439 lines
		
	
	
	
		
			9.8 KiB
			
		
	
	
	
		
			C
		
	
	
	
	
	
| /*
 | |
|  * sst25l.c
 | |
|  *
 | |
|  * Driver for SST25L SPI Flash chips
 | |
|  *
 | |
|  * Copyright © 2009 Bluewater Systems Ltd
 | |
|  * Author: Andre Renaud <andre@bluewatersys.com>
 | |
|  * Author: Ryan Mallon
 | |
|  *
 | |
|  * Based on m25p80.c
 | |
|  *
 | |
|  * This code is free software; you can redistribute it and/or modify
 | |
|  * it under the terms of the GNU General Public License version 2 as
 | |
|  * published by the Free Software Foundation.
 | |
|  *
 | |
|  */
 | |
| 
 | |
| #include <linux/init.h>
 | |
| #include <linux/module.h>
 | |
| #include <linux/device.h>
 | |
| #include <linux/mutex.h>
 | |
| #include <linux/interrupt.h>
 | |
| #include <linux/slab.h>
 | |
| #include <linux/sched.h>
 | |
| 
 | |
| #include <linux/mtd/mtd.h>
 | |
| #include <linux/mtd/partitions.h>
 | |
| 
 | |
| #include <linux/spi/spi.h>
 | |
| #include <linux/spi/flash.h>
 | |
| 
 | |
| /* Erases can take up to 3 seconds! */
 | |
| #define MAX_READY_WAIT_JIFFIES	msecs_to_jiffies(3000)
 | |
| 
 | |
| #define SST25L_CMD_WRSR		0x01	/* Write status register */
 | |
| #define SST25L_CMD_WRDI		0x04	/* Write disable */
 | |
| #define SST25L_CMD_RDSR		0x05	/* Read status register */
 | |
| #define SST25L_CMD_WREN		0x06	/* Write enable */
 | |
| #define SST25L_CMD_READ		0x03	/* High speed read */
 | |
| 
 | |
| #define SST25L_CMD_EWSR		0x50	/* Enable write status register */
 | |
| #define SST25L_CMD_SECTOR_ERASE	0x20	/* Erase sector */
 | |
| #define SST25L_CMD_READ_ID	0x90	/* Read device ID */
 | |
| #define SST25L_CMD_AAI_PROGRAM	0xaf	/* Auto address increment */
 | |
| 
 | |
| #define SST25L_STATUS_BUSY	(1 << 0)	/* Chip is busy */
 | |
| #define SST25L_STATUS_WREN	(1 << 1)	/* Write enabled */
 | |
| #define SST25L_STATUS_BP0	(1 << 2)	/* Block protection 0 */
 | |
| #define SST25L_STATUS_BP1	(1 << 3)	/* Block protection 1 */
 | |
| 
 | |
| struct sst25l_flash {
 | |
| 	struct spi_device	*spi;
 | |
| 	struct mutex		lock;
 | |
| 	struct mtd_info		mtd;
 | |
| };
 | |
| 
 | |
| struct flash_info {
 | |
| 	const char		*name;
 | |
| 	uint16_t		device_id;
 | |
| 	unsigned		page_size;
 | |
| 	unsigned		nr_pages;
 | |
| 	unsigned		erase_size;
 | |
| };
 | |
| 
 | |
| #define to_sst25l_flash(x) container_of(x, struct sst25l_flash, mtd)
 | |
| 
 | |
| static struct flash_info sst25l_flash_info[] = {
 | |
| 	{"sst25lf020a", 0xbf43, 256, 1024, 4096},
 | |
| 	{"sst25lf040a",	0xbf44,	256, 2048, 4096},
 | |
| };
 | |
| 
 | |
| static int sst25l_status(struct sst25l_flash *flash, int *status)
 | |
| {
 | |
| 	struct spi_message m;
 | |
| 	struct spi_transfer t;
 | |
| 	unsigned char cmd_resp[2];
 | |
| 	int err;
 | |
| 
 | |
| 	spi_message_init(&m);
 | |
| 	memset(&t, 0, sizeof(struct spi_transfer));
 | |
| 
 | |
| 	cmd_resp[0] = SST25L_CMD_RDSR;
 | |
| 	cmd_resp[1] = 0xff;
 | |
| 	t.tx_buf = cmd_resp;
 | |
| 	t.rx_buf = cmd_resp;
 | |
| 	t.len = sizeof(cmd_resp);
 | |
| 	spi_message_add_tail(&t, &m);
 | |
| 	err = spi_sync(flash->spi, &m);
 | |
| 	if (err < 0)
 | |
| 		return err;
 | |
| 
 | |
| 	*status = cmd_resp[1];
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int sst25l_write_enable(struct sst25l_flash *flash, int enable)
 | |
| {
 | |
| 	unsigned char command[2];
 | |
| 	int status, err;
 | |
| 
 | |
| 	command[0] = enable ? SST25L_CMD_WREN : SST25L_CMD_WRDI;
 | |
| 	err = spi_write(flash->spi, command, 1);
 | |
| 	if (err)
 | |
| 		return err;
 | |
| 
 | |
| 	command[0] = SST25L_CMD_EWSR;
 | |
| 	err = spi_write(flash->spi, command, 1);
 | |
| 	if (err)
 | |
| 		return err;
 | |
| 
 | |
| 	command[0] = SST25L_CMD_WRSR;
 | |
| 	command[1] = enable ? 0 : SST25L_STATUS_BP0 | SST25L_STATUS_BP1;
 | |
| 	err = spi_write(flash->spi, command, 2);
 | |
| 	if (err)
 | |
| 		return err;
 | |
| 
 | |
| 	if (enable) {
 | |
| 		err = sst25l_status(flash, &status);
 | |
| 		if (err)
 | |
| 			return err;
 | |
| 		if (!(status & SST25L_STATUS_WREN))
 | |
| 			return -EROFS;
 | |
| 	}
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int sst25l_wait_till_ready(struct sst25l_flash *flash)
 | |
| {
 | |
| 	unsigned long deadline;
 | |
| 	int status, err;
 | |
| 
 | |
| 	deadline = jiffies + MAX_READY_WAIT_JIFFIES;
 | |
| 	do {
 | |
| 		err = sst25l_status(flash, &status);
 | |
| 		if (err)
 | |
| 			return err;
 | |
| 		if (!(status & SST25L_STATUS_BUSY))
 | |
| 			return 0;
 | |
| 
 | |
| 		cond_resched();
 | |
| 	} while (!time_after_eq(jiffies, deadline));
 | |
| 
 | |
| 	return -ETIMEDOUT;
 | |
| }
 | |
| 
 | |
| static int sst25l_erase_sector(struct sst25l_flash *flash, uint32_t offset)
 | |
| {
 | |
| 	unsigned char command[4];
 | |
| 	int err;
 | |
| 
 | |
| 	err = sst25l_write_enable(flash, 1);
 | |
| 	if (err)
 | |
| 		return err;
 | |
| 
 | |
| 	command[0] = SST25L_CMD_SECTOR_ERASE;
 | |
| 	command[1] = offset >> 16;
 | |
| 	command[2] = offset >> 8;
 | |
| 	command[3] = offset;
 | |
| 	err = spi_write(flash->spi, command, 4);
 | |
| 	if (err)
 | |
| 		return err;
 | |
| 
 | |
| 	err = sst25l_wait_till_ready(flash);
 | |
| 	if (err)
 | |
| 		return err;
 | |
| 
 | |
| 	return sst25l_write_enable(flash, 0);
 | |
| }
 | |
| 
 | |
| static int sst25l_erase(struct mtd_info *mtd, struct erase_info *instr)
 | |
| {
 | |
| 	struct sst25l_flash *flash = to_sst25l_flash(mtd);
 | |
| 	uint32_t addr, end;
 | |
| 	int err;
 | |
| 
 | |
| 	/* Sanity checks */
 | |
| 	if ((uint32_t)instr->len % mtd->erasesize)
 | |
| 		return -EINVAL;
 | |
| 
 | |
| 	if ((uint32_t)instr->addr % mtd->erasesize)
 | |
| 		return -EINVAL;
 | |
| 
 | |
| 	addr = instr->addr;
 | |
| 	end = addr + instr->len;
 | |
| 
 | |
| 	mutex_lock(&flash->lock);
 | |
| 
 | |
| 	err = sst25l_wait_till_ready(flash);
 | |
| 	if (err) {
 | |
| 		mutex_unlock(&flash->lock);
 | |
| 		return err;
 | |
| 	}
 | |
| 
 | |
| 	while (addr < end) {
 | |
| 		err = sst25l_erase_sector(flash, addr);
 | |
| 		if (err) {
 | |
| 			mutex_unlock(&flash->lock);
 | |
| 			instr->state = MTD_ERASE_FAILED;
 | |
| 			dev_err(&flash->spi->dev, "Erase failed\n");
 | |
| 			return err;
 | |
| 		}
 | |
| 
 | |
| 		addr += mtd->erasesize;
 | |
| 	}
 | |
| 
 | |
| 	mutex_unlock(&flash->lock);
 | |
| 
 | |
| 	instr->state = MTD_ERASE_DONE;
 | |
| 	mtd_erase_callback(instr);
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int sst25l_read(struct mtd_info *mtd, loff_t from, size_t len,
 | |
| 		       size_t *retlen, unsigned char *buf)
 | |
| {
 | |
| 	struct sst25l_flash *flash = to_sst25l_flash(mtd);
 | |
| 	struct spi_transfer transfer[2];
 | |
| 	struct spi_message message;
 | |
| 	unsigned char command[4];
 | |
| 	int ret;
 | |
| 
 | |
| 	spi_message_init(&message);
 | |
| 	memset(&transfer, 0, sizeof(transfer));
 | |
| 
 | |
| 	command[0] = SST25L_CMD_READ;
 | |
| 	command[1] = from >> 16;
 | |
| 	command[2] = from >> 8;
 | |
| 	command[3] = from;
 | |
| 
 | |
| 	transfer[0].tx_buf = command;
 | |
| 	transfer[0].len = sizeof(command);
 | |
| 	spi_message_add_tail(&transfer[0], &message);
 | |
| 
 | |
| 	transfer[1].rx_buf = buf;
 | |
| 	transfer[1].len = len;
 | |
| 	spi_message_add_tail(&transfer[1], &message);
 | |
| 
 | |
| 	mutex_lock(&flash->lock);
 | |
| 
 | |
| 	/* Wait for previous write/erase to complete */
 | |
| 	ret = sst25l_wait_till_ready(flash);
 | |
| 	if (ret) {
 | |
| 		mutex_unlock(&flash->lock);
 | |
| 		return ret;
 | |
| 	}
 | |
| 
 | |
| 	spi_sync(flash->spi, &message);
 | |
| 
 | |
| 	if (retlen && message.actual_length > sizeof(command))
 | |
| 		*retlen += message.actual_length - sizeof(command);
 | |
| 
 | |
| 	mutex_unlock(&flash->lock);
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int sst25l_write(struct mtd_info *mtd, loff_t to, size_t len,
 | |
| 			size_t *retlen, const unsigned char *buf)
 | |
| {
 | |
| 	struct sst25l_flash *flash = to_sst25l_flash(mtd);
 | |
| 	int i, j, ret, bytes, copied = 0;
 | |
| 	unsigned char command[5];
 | |
| 
 | |
| 	if ((uint32_t)to % mtd->writesize)
 | |
| 		return -EINVAL;
 | |
| 
 | |
| 	mutex_lock(&flash->lock);
 | |
| 
 | |
| 	ret = sst25l_write_enable(flash, 1);
 | |
| 	if (ret)
 | |
| 		goto out;
 | |
| 
 | |
| 	for (i = 0; i < len; i += mtd->writesize) {
 | |
| 		ret = sst25l_wait_till_ready(flash);
 | |
| 		if (ret)
 | |
| 			goto out;
 | |
| 
 | |
| 		/* Write the first byte of the page */
 | |
| 		command[0] = SST25L_CMD_AAI_PROGRAM;
 | |
| 		command[1] = (to + i) >> 16;
 | |
| 		command[2] = (to + i) >> 8;
 | |
| 		command[3] = (to + i);
 | |
| 		command[4] = buf[i];
 | |
| 		ret = spi_write(flash->spi, command, 5);
 | |
| 		if (ret < 0)
 | |
| 			goto out;
 | |
| 		copied++;
 | |
| 
 | |
| 		/*
 | |
| 		 * Write the remaining bytes using auto address
 | |
| 		 * increment mode
 | |
| 		 */
 | |
| 		bytes = min_t(uint32_t, mtd->writesize, len - i);
 | |
| 		for (j = 1; j < bytes; j++, copied++) {
 | |
| 			ret = sst25l_wait_till_ready(flash);
 | |
| 			if (ret)
 | |
| 				goto out;
 | |
| 
 | |
| 			command[1] = buf[i + j];
 | |
| 			ret = spi_write(flash->spi, command, 2);
 | |
| 			if (ret)
 | |
| 				goto out;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| out:
 | |
| 	ret = sst25l_write_enable(flash, 0);
 | |
| 
 | |
| 	if (retlen)
 | |
| 		*retlen = copied;
 | |
| 
 | |
| 	mutex_unlock(&flash->lock);
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| static struct flash_info *sst25l_match_device(struct spi_device *spi)
 | |
| {
 | |
| 	struct flash_info *flash_info = NULL;
 | |
| 	struct spi_message m;
 | |
| 	struct spi_transfer t;
 | |
| 	unsigned char cmd_resp[6];
 | |
| 	int i, err;
 | |
| 	uint16_t id;
 | |
| 
 | |
| 	spi_message_init(&m);
 | |
| 	memset(&t, 0, sizeof(struct spi_transfer));
 | |
| 
 | |
| 	cmd_resp[0] = SST25L_CMD_READ_ID;
 | |
| 	cmd_resp[1] = 0;
 | |
| 	cmd_resp[2] = 0;
 | |
| 	cmd_resp[3] = 0;
 | |
| 	cmd_resp[4] = 0xff;
 | |
| 	cmd_resp[5] = 0xff;
 | |
| 	t.tx_buf = cmd_resp;
 | |
| 	t.rx_buf = cmd_resp;
 | |
| 	t.len = sizeof(cmd_resp);
 | |
| 	spi_message_add_tail(&t, &m);
 | |
| 	err = spi_sync(spi, &m);
 | |
| 	if (err < 0) {
 | |
| 		dev_err(&spi->dev, "error reading device id\n");
 | |
| 		return NULL;
 | |
| 	}
 | |
| 
 | |
| 	id = (cmd_resp[4] << 8) | cmd_resp[5];
 | |
| 
 | |
| 	for (i = 0; i < ARRAY_SIZE(sst25l_flash_info); i++)
 | |
| 		if (sst25l_flash_info[i].device_id == id)
 | |
| 			flash_info = &sst25l_flash_info[i];
 | |
| 
 | |
| 	if (!flash_info)
 | |
| 		dev_err(&spi->dev, "unknown id %.4x\n", id);
 | |
| 
 | |
| 	return flash_info;
 | |
| }
 | |
| 
 | |
| static int sst25l_probe(struct spi_device *spi)
 | |
| {
 | |
| 	struct flash_info *flash_info;
 | |
| 	struct sst25l_flash *flash;
 | |
| 	struct flash_platform_data *data;
 | |
| 	int ret;
 | |
| 
 | |
| 	flash_info = sst25l_match_device(spi);
 | |
| 	if (!flash_info)
 | |
| 		return -ENODEV;
 | |
| 
 | |
| 	flash = kzalloc(sizeof(struct sst25l_flash), GFP_KERNEL);
 | |
| 	if (!flash)
 | |
| 		return -ENOMEM;
 | |
| 
 | |
| 	flash->spi = spi;
 | |
| 	mutex_init(&flash->lock);
 | |
| 	dev_set_drvdata(&spi->dev, flash);
 | |
| 
 | |
| 	data = spi->dev.platform_data;
 | |
| 	if (data && data->name)
 | |
| 		flash->mtd.name = data->name;
 | |
| 	else
 | |
| 		flash->mtd.name = dev_name(&spi->dev);
 | |
| 
 | |
| 	flash->mtd.type		= MTD_NORFLASH;
 | |
| 	flash->mtd.flags	= MTD_CAP_NORFLASH;
 | |
| 	flash->mtd.erasesize	= flash_info->erase_size;
 | |
| 	flash->mtd.writesize	= flash_info->page_size;
 | |
| 	flash->mtd.writebufsize	= flash_info->page_size;
 | |
| 	flash->mtd.size		= flash_info->page_size * flash_info->nr_pages;
 | |
| 	flash->mtd._erase	= sst25l_erase;
 | |
| 	flash->mtd._read		= sst25l_read;
 | |
| 	flash->mtd._write 	= sst25l_write;
 | |
| 
 | |
| 	dev_info(&spi->dev, "%s (%lld KiB)\n", flash_info->name,
 | |
| 		 (long long)flash->mtd.size >> 10);
 | |
| 
 | |
| 	pr_debug("mtd .name = %s, .size = 0x%llx (%lldMiB) "
 | |
| 	      ".erasesize = 0x%.8x (%uKiB) .numeraseregions = %d\n",
 | |
| 	      flash->mtd.name,
 | |
| 	      (long long)flash->mtd.size, (long long)(flash->mtd.size >> 20),
 | |
| 	      flash->mtd.erasesize, flash->mtd.erasesize / 1024,
 | |
| 	      flash->mtd.numeraseregions);
 | |
| 
 | |
| 
 | |
| 	ret = mtd_device_parse_register(&flash->mtd, NULL, NULL,
 | |
| 					data ? data->parts : NULL,
 | |
| 					data ? data->nr_parts : 0);
 | |
| 	if (ret) {
 | |
| 		kfree(flash);
 | |
| 		dev_set_drvdata(&spi->dev, NULL);
 | |
| 		return -ENODEV;
 | |
| 	}
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int sst25l_remove(struct spi_device *spi)
 | |
| {
 | |
| 	struct sst25l_flash *flash = dev_get_drvdata(&spi->dev);
 | |
| 	int ret;
 | |
| 
 | |
| 	ret = mtd_device_unregister(&flash->mtd);
 | |
| 	if (ret == 0)
 | |
| 		kfree(flash);
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| static struct spi_driver sst25l_driver = {
 | |
| 	.driver = {
 | |
| 		.name	= "sst25l",
 | |
| 		.owner	= THIS_MODULE,
 | |
| 	},
 | |
| 	.probe		= sst25l_probe,
 | |
| 	.remove		= sst25l_remove,
 | |
| };
 | |
| 
 | |
| module_spi_driver(sst25l_driver);
 | |
| 
 | |
| MODULE_DESCRIPTION("MTD SPI driver for SST25L Flash chips");
 | |
| MODULE_AUTHOR("Andre Renaud <andre@bluewatersys.com>, "
 | |
| 	      "Ryan Mallon");
 | |
| MODULE_LICENSE("GPL");
 |