 fc52692c49
			
		
	
	
	fc52692c49
	
	
	
		
			
			CONFIG_HOTPLUG is going away as an option. As a result, the __dev* markings need to be removed. This change removes the use of __devinit, __devexit_p, and __devexit from these drivers. Based on patches originally written by Bill Pemberton, but redone by me in order to handle some of the coding style issues better, by hand. Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
		
			
				
	
	
		
			378 lines
		
	
	
	
		
			8.9 KiB
			
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			378 lines
		
	
	
	
		
			8.9 KiB
			
		
	
	
	
		
			C
		
	
	
	
	
	
| /*
 | |
|  * AD7887 SPI ADC driver
 | |
|  *
 | |
|  * Copyright 2010-2011 Analog Devices Inc.
 | |
|  *
 | |
|  * Licensed under the GPL-2.
 | |
|  */
 | |
| 
 | |
| #include <linux/device.h>
 | |
| #include <linux/kernel.h>
 | |
| #include <linux/slab.h>
 | |
| #include <linux/sysfs.h>
 | |
| #include <linux/spi/spi.h>
 | |
| #include <linux/regulator/consumer.h>
 | |
| #include <linux/err.h>
 | |
| #include <linux/module.h>
 | |
| #include <linux/interrupt.h>
 | |
| 
 | |
| #include <linux/iio/iio.h>
 | |
| #include <linux/iio/sysfs.h>
 | |
| #include <linux/iio/buffer.h>
 | |
| 
 | |
| #include <linux/iio/trigger_consumer.h>
 | |
| #include <linux/iio/triggered_buffer.h>
 | |
| 
 | |
| #include <linux/platform_data/ad7887.h>
 | |
| 
 | |
| #define AD7887_REF_DIS		(1 << 5) /* on-chip reference disable */
 | |
| #define AD7887_DUAL		(1 << 4) /* dual-channel mode */
 | |
| #define AD7887_CH_AIN1		(1 << 3) /* convert on channel 1, DUAL=1 */
 | |
| #define AD7887_CH_AIN0		(0 << 3) /* convert on channel 0, DUAL=0,1 */
 | |
| #define AD7887_PM_MODE1		(0)	 /* CS based shutdown */
 | |
| #define AD7887_PM_MODE2		(1)	 /* full on */
 | |
| #define AD7887_PM_MODE3		(2)	 /* auto shutdown after conversion */
 | |
| #define AD7887_PM_MODE4		(3)	 /* standby mode */
 | |
| 
 | |
| enum ad7887_channels {
 | |
| 	AD7887_CH0,
 | |
| 	AD7887_CH0_CH1,
 | |
| 	AD7887_CH1,
 | |
| };
 | |
| 
 | |
| #define RES_MASK(bits)	((1 << (bits)) - 1)
 | |
| 
 | |
| /**
 | |
|  * struct ad7887_chip_info - chip specifc information
 | |
|  * @int_vref_mv:	the internal reference voltage
 | |
|  * @channel:		channel specification
 | |
|  */
 | |
| struct ad7887_chip_info {
 | |
| 	u16				int_vref_mv;
 | |
| 	struct iio_chan_spec		channel[3];
 | |
| };
 | |
| 
 | |
| struct ad7887_state {
 | |
| 	struct spi_device		*spi;
 | |
| 	const struct ad7887_chip_info	*chip_info;
 | |
| 	struct regulator		*reg;
 | |
| 	struct spi_transfer		xfer[4];
 | |
| 	struct spi_message		msg[3];
 | |
| 	struct spi_message		*ring_msg;
 | |
| 	unsigned char			tx_cmd_buf[4];
 | |
| 
 | |
| 	/*
 | |
| 	 * DMA (thus cache coherency maintenance) requires the
 | |
| 	 * transfer buffers to live in their own cache lines.
 | |
| 	 * Buffer needs to be large enough to hold two 16 bit samples and a
 | |
| 	 * 64 bit aligned 64 bit timestamp.
 | |
| 	 */
 | |
| 	unsigned char data[ALIGN(4, sizeof(s64)) + sizeof(s64)]
 | |
| 		____cacheline_aligned;
 | |
| };
 | |
| 
 | |
| enum ad7887_supported_device_ids {
 | |
| 	ID_AD7887
 | |
| };
 | |
| 
 | |
| static int ad7887_ring_preenable(struct iio_dev *indio_dev)
 | |
| {
 | |
| 	struct ad7887_state *st = iio_priv(indio_dev);
 | |
| 	int ret;
 | |
| 
 | |
| 	ret = iio_sw_buffer_preenable(indio_dev);
 | |
| 	if (ret < 0)
 | |
| 		return ret;
 | |
| 
 | |
| 	/* We know this is a single long so can 'cheat' */
 | |
| 	switch (*indio_dev->active_scan_mask) {
 | |
| 	case (1 << 0):
 | |
| 		st->ring_msg = &st->msg[AD7887_CH0];
 | |
| 		break;
 | |
| 	case (1 << 1):
 | |
| 		st->ring_msg = &st->msg[AD7887_CH1];
 | |
| 		/* Dummy read: push CH1 setting down to hardware */
 | |
| 		spi_sync(st->spi, st->ring_msg);
 | |
| 		break;
 | |
| 	case ((1 << 1) | (1 << 0)):
 | |
| 		st->ring_msg = &st->msg[AD7887_CH0_CH1];
 | |
| 		break;
 | |
| 	}
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int ad7887_ring_postdisable(struct iio_dev *indio_dev)
 | |
| {
 | |
| 	struct ad7887_state *st = iio_priv(indio_dev);
 | |
| 
 | |
| 	/* dummy read: restore default CH0 settin */
 | |
| 	return spi_sync(st->spi, &st->msg[AD7887_CH0]);
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * ad7887_trigger_handler() bh of trigger launched polling to ring buffer
 | |
|  *
 | |
|  * Currently there is no option in this driver to disable the saving of
 | |
|  * timestamps within the ring.
 | |
|  **/
 | |
| static irqreturn_t ad7887_trigger_handler(int irq, void *p)
 | |
| {
 | |
| 	struct iio_poll_func *pf = p;
 | |
| 	struct iio_dev *indio_dev = pf->indio_dev;
 | |
| 	struct ad7887_state *st = iio_priv(indio_dev);
 | |
| 	s64 time_ns;
 | |
| 	int b_sent;
 | |
| 
 | |
| 	b_sent = spi_sync(st->spi, st->ring_msg);
 | |
| 	if (b_sent)
 | |
| 		goto done;
 | |
| 
 | |
| 	time_ns = iio_get_time_ns();
 | |
| 
 | |
| 	if (indio_dev->scan_timestamp)
 | |
| 		memcpy(st->data + indio_dev->scan_bytes - sizeof(s64),
 | |
| 		       &time_ns, sizeof(time_ns));
 | |
| 
 | |
| 	iio_push_to_buffers(indio_dev, st->data);
 | |
| done:
 | |
| 	iio_trigger_notify_done(indio_dev->trig);
 | |
| 
 | |
| 	return IRQ_HANDLED;
 | |
| }
 | |
| 
 | |
| static const struct iio_buffer_setup_ops ad7887_ring_setup_ops = {
 | |
| 	.preenable = &ad7887_ring_preenable,
 | |
| 	.postenable = &iio_triggered_buffer_postenable,
 | |
| 	.predisable = &iio_triggered_buffer_predisable,
 | |
| 	.postdisable = &ad7887_ring_postdisable,
 | |
| };
 | |
| 
 | |
| static int ad7887_scan_direct(struct ad7887_state *st, unsigned ch)
 | |
| {
 | |
| 	int ret = spi_sync(st->spi, &st->msg[ch]);
 | |
| 	if (ret)
 | |
| 		return ret;
 | |
| 
 | |
| 	return (st->data[(ch * 2)] << 8) | st->data[(ch * 2) + 1];
 | |
| }
 | |
| 
 | |
| static int ad7887_read_raw(struct iio_dev *indio_dev,
 | |
| 			   struct iio_chan_spec const *chan,
 | |
| 			   int *val,
 | |
| 			   int *val2,
 | |
| 			   long m)
 | |
| {
 | |
| 	int ret;
 | |
| 	struct ad7887_state *st = iio_priv(indio_dev);
 | |
| 
 | |
| 	switch (m) {
 | |
| 	case IIO_CHAN_INFO_RAW:
 | |
| 		mutex_lock(&indio_dev->mlock);
 | |
| 		if (iio_buffer_enabled(indio_dev))
 | |
| 			ret = -EBUSY;
 | |
| 		else
 | |
| 			ret = ad7887_scan_direct(st, chan->address);
 | |
| 		mutex_unlock(&indio_dev->mlock);
 | |
| 
 | |
| 		if (ret < 0)
 | |
| 			return ret;
 | |
| 		*val = ret >> chan->scan_type.shift;
 | |
| 		*val &= RES_MASK(chan->scan_type.realbits);
 | |
| 		return IIO_VAL_INT;
 | |
| 	case IIO_CHAN_INFO_SCALE:
 | |
| 		if (st->reg) {
 | |
| 			*val = regulator_get_voltage(st->reg);
 | |
| 			if (*val < 0)
 | |
| 				return *val;
 | |
| 			*val /= 1000;
 | |
| 		} else {
 | |
| 			*val = st->chip_info->int_vref_mv;
 | |
| 		}
 | |
| 
 | |
| 		*val2 = chan->scan_type.realbits;
 | |
| 
 | |
| 		return IIO_VAL_FRACTIONAL_LOG2;
 | |
| 	}
 | |
| 	return -EINVAL;
 | |
| }
 | |
| 
 | |
| 
 | |
| static const struct ad7887_chip_info ad7887_chip_info_tbl[] = {
 | |
| 	/*
 | |
| 	 * More devices added in future
 | |
| 	 */
 | |
| 	[ID_AD7887] = {
 | |
| 		.channel[0] = {
 | |
| 			.type = IIO_VOLTAGE,
 | |
| 			.indexed = 1,
 | |
| 			.channel = 1,
 | |
| 			.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
 | |
| 			IIO_CHAN_INFO_SCALE_SHARED_BIT,
 | |
| 			.address = 1,
 | |
| 			.scan_index = 1,
 | |
| 			.scan_type = IIO_ST('u', 12, 16, 0),
 | |
| 		},
 | |
| 		.channel[1] = {
 | |
| 			.type = IIO_VOLTAGE,
 | |
| 			.indexed = 1,
 | |
| 			.channel = 0,
 | |
| 			.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
 | |
| 			IIO_CHAN_INFO_SCALE_SHARED_BIT,
 | |
| 			.address = 0,
 | |
| 			.scan_index = 0,
 | |
| 			.scan_type = IIO_ST('u', 12, 16, 0),
 | |
| 		},
 | |
| 		.channel[2] = IIO_CHAN_SOFT_TIMESTAMP(2),
 | |
| 		.int_vref_mv = 2500,
 | |
| 	},
 | |
| };
 | |
| 
 | |
| static const struct iio_info ad7887_info = {
 | |
| 	.read_raw = &ad7887_read_raw,
 | |
| 	.driver_module = THIS_MODULE,
 | |
| };
 | |
| 
 | |
| static int ad7887_probe(struct spi_device *spi)
 | |
| {
 | |
| 	struct ad7887_platform_data *pdata = spi->dev.platform_data;
 | |
| 	struct ad7887_state *st;
 | |
| 	struct iio_dev *indio_dev = iio_device_alloc(sizeof(*st));
 | |
| 	uint8_t mode;
 | |
| 	int ret;
 | |
| 
 | |
| 	if (indio_dev == NULL)
 | |
| 		return -ENOMEM;
 | |
| 
 | |
| 	st = iio_priv(indio_dev);
 | |
| 
 | |
| 	if (!pdata || !pdata->use_onchip_ref) {
 | |
| 		st->reg = regulator_get(&spi->dev, "vref");
 | |
| 		if (IS_ERR(st->reg)) {
 | |
| 			ret = PTR_ERR(st->reg);
 | |
| 			goto error_free;
 | |
| 		}
 | |
| 
 | |
| 		ret = regulator_enable(st->reg);
 | |
| 		if (ret)
 | |
| 			goto error_put_reg;
 | |
| 	}
 | |
| 
 | |
| 	st->chip_info =
 | |
| 		&ad7887_chip_info_tbl[spi_get_device_id(spi)->driver_data];
 | |
| 
 | |
| 	spi_set_drvdata(spi, indio_dev);
 | |
| 	st->spi = spi;
 | |
| 
 | |
| 	/* Estabilish that the iio_dev is a child of the spi device */
 | |
| 	indio_dev->dev.parent = &spi->dev;
 | |
| 	indio_dev->name = spi_get_device_id(spi)->name;
 | |
| 	indio_dev->info = &ad7887_info;
 | |
| 	indio_dev->modes = INDIO_DIRECT_MODE;
 | |
| 
 | |
| 	/* Setup default message */
 | |
| 
 | |
| 	mode = AD7887_PM_MODE4;
 | |
| 	if (!pdata || !pdata->use_onchip_ref)
 | |
| 		mode |= AD7887_REF_DIS;
 | |
| 	if (pdata && pdata->en_dual)
 | |
| 		mode |= AD7887_DUAL;
 | |
| 
 | |
| 	st->tx_cmd_buf[0] = AD7887_CH_AIN0 | mode;
 | |
| 
 | |
| 	st->xfer[0].rx_buf = &st->data[0];
 | |
| 	st->xfer[0].tx_buf = &st->tx_cmd_buf[0];
 | |
| 	st->xfer[0].len = 2;
 | |
| 
 | |
| 	spi_message_init(&st->msg[AD7887_CH0]);
 | |
| 	spi_message_add_tail(&st->xfer[0], &st->msg[AD7887_CH0]);
 | |
| 
 | |
| 	if (pdata && pdata->en_dual) {
 | |
| 		st->tx_cmd_buf[2] = AD7887_CH_AIN1 | mode;
 | |
| 
 | |
| 		st->xfer[1].rx_buf = &st->data[0];
 | |
| 		st->xfer[1].tx_buf = &st->tx_cmd_buf[2];
 | |
| 		st->xfer[1].len = 2;
 | |
| 
 | |
| 		st->xfer[2].rx_buf = &st->data[2];
 | |
| 		st->xfer[2].tx_buf = &st->tx_cmd_buf[0];
 | |
| 		st->xfer[2].len = 2;
 | |
| 
 | |
| 		spi_message_init(&st->msg[AD7887_CH0_CH1]);
 | |
| 		spi_message_add_tail(&st->xfer[1], &st->msg[AD7887_CH0_CH1]);
 | |
| 		spi_message_add_tail(&st->xfer[2], &st->msg[AD7887_CH0_CH1]);
 | |
| 
 | |
| 		st->xfer[3].rx_buf = &st->data[2];
 | |
| 		st->xfer[3].tx_buf = &st->tx_cmd_buf[2];
 | |
| 		st->xfer[3].len = 2;
 | |
| 
 | |
| 		spi_message_init(&st->msg[AD7887_CH1]);
 | |
| 		spi_message_add_tail(&st->xfer[3], &st->msg[AD7887_CH1]);
 | |
| 
 | |
| 		indio_dev->channels = st->chip_info->channel;
 | |
| 		indio_dev->num_channels = 3;
 | |
| 	} else {
 | |
| 		indio_dev->channels = &st->chip_info->channel[1];
 | |
| 		indio_dev->num_channels = 2;
 | |
| 	}
 | |
| 
 | |
| 	ret = iio_triggered_buffer_setup(indio_dev, &iio_pollfunc_store_time,
 | |
| 			&ad7887_trigger_handler, &ad7887_ring_setup_ops);
 | |
| 	if (ret)
 | |
| 		goto error_disable_reg;
 | |
| 
 | |
| 	ret = iio_device_register(indio_dev);
 | |
| 	if (ret)
 | |
| 		goto error_unregister_ring;
 | |
| 
 | |
| 	return 0;
 | |
| error_unregister_ring:
 | |
| 	iio_triggered_buffer_cleanup(indio_dev);
 | |
| error_disable_reg:
 | |
| 	if (st->reg)
 | |
| 		regulator_disable(st->reg);
 | |
| error_put_reg:
 | |
| 	if (st->reg)
 | |
| 		regulator_put(st->reg);
 | |
| error_free:
 | |
| 	iio_device_free(indio_dev);
 | |
| 
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| static int ad7887_remove(struct spi_device *spi)
 | |
| {
 | |
| 	struct iio_dev *indio_dev = spi_get_drvdata(spi);
 | |
| 	struct ad7887_state *st = iio_priv(indio_dev);
 | |
| 
 | |
| 	iio_device_unregister(indio_dev);
 | |
| 	iio_triggered_buffer_cleanup(indio_dev);
 | |
| 	if (st->reg) {
 | |
| 		regulator_disable(st->reg);
 | |
| 		regulator_put(st->reg);
 | |
| 	}
 | |
| 	iio_device_free(indio_dev);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static const struct spi_device_id ad7887_id[] = {
 | |
| 	{"ad7887", ID_AD7887},
 | |
| 	{}
 | |
| };
 | |
| MODULE_DEVICE_TABLE(spi, ad7887_id);
 | |
| 
 | |
| static struct spi_driver ad7887_driver = {
 | |
| 	.driver = {
 | |
| 		.name	= "ad7887",
 | |
| 		.owner	= THIS_MODULE,
 | |
| 	},
 | |
| 	.probe		= ad7887_probe,
 | |
| 	.remove		= ad7887_remove,
 | |
| 	.id_table	= ad7887_id,
 | |
| };
 | |
| module_spi_driver(ad7887_driver);
 | |
| 
 | |
| MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
 | |
| MODULE_DESCRIPTION("Analog Devices AD7887 ADC");
 | |
| MODULE_LICENSE("GPL v2");
 |