 9baa3c34ac
			
		
	
	
	9baa3c34ac
	
	
	
		
			
			We should prefer `struct pci_device_id` over `DEFINE_PCI_DEVICE_TABLE` to meet kernel coding style guidelines. This issue was reported by checkpatch. A simplified version of the semantic patch that makes this change is as follows (http://coccinelle.lip6.fr/): // <smpl> @@ identifier i; declarer name DEFINE_PCI_DEVICE_TABLE; initializer z; @@ - DEFINE_PCI_DEVICE_TABLE(i) + const struct pci_device_id i[] = z; // </smpl> [bhelgaas: add semantic patch] Signed-off-by: Benoit Taine <benoit.taine@lip6.fr> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
		
			
				
	
	
		
			2914 lines
		
	
	
	
		
			77 KiB
			
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			2914 lines
		
	
	
	
		
			77 KiB
			
		
	
	
	
		
			C
		
	
	
	
	
	
| /*******************************************************************************
 | |
| 
 | |
|   Intel(R) 82576 Virtual Function Linux driver
 | |
|   Copyright(c) 2009 - 2012 Intel Corporation.
 | |
| 
 | |
|   This program is free software; you can redistribute it and/or modify it
 | |
|   under the terms and conditions of the GNU General Public License,
 | |
|   version 2, as published by the Free Software Foundation.
 | |
| 
 | |
|   This program is distributed in the hope it will be useful, but WITHOUT
 | |
|   ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
 | |
|   FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
 | |
|   more details.
 | |
| 
 | |
|   You should have received a copy of the GNU General Public License along with
 | |
|   this program; if not, write to the Free Software Foundation, Inc.,
 | |
|   51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
 | |
| 
 | |
|   The full GNU General Public License is included in this distribution in
 | |
|   the file called "COPYING".
 | |
| 
 | |
|   Contact Information:
 | |
|   e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
 | |
|   Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
 | |
| 
 | |
| *******************************************************************************/
 | |
| 
 | |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 | |
| 
 | |
| #include <linux/module.h>
 | |
| #include <linux/types.h>
 | |
| #include <linux/init.h>
 | |
| #include <linux/pci.h>
 | |
| #include <linux/vmalloc.h>
 | |
| #include <linux/pagemap.h>
 | |
| #include <linux/delay.h>
 | |
| #include <linux/netdevice.h>
 | |
| #include <linux/tcp.h>
 | |
| #include <linux/ipv6.h>
 | |
| #include <linux/slab.h>
 | |
| #include <net/checksum.h>
 | |
| #include <net/ip6_checksum.h>
 | |
| #include <linux/mii.h>
 | |
| #include <linux/ethtool.h>
 | |
| #include <linux/if_vlan.h>
 | |
| #include <linux/prefetch.h>
 | |
| 
 | |
| #include "igbvf.h"
 | |
| 
 | |
| #define DRV_VERSION "2.0.2-k"
 | |
| char igbvf_driver_name[] = "igbvf";
 | |
| const char igbvf_driver_version[] = DRV_VERSION;
 | |
| static const char igbvf_driver_string[] =
 | |
| 		  "Intel(R) Gigabit Virtual Function Network Driver";
 | |
| static const char igbvf_copyright[] =
 | |
| 		  "Copyright (c) 2009 - 2012 Intel Corporation.";
 | |
| 
 | |
| #define DEFAULT_MSG_ENABLE (NETIF_MSG_DRV|NETIF_MSG_PROBE|NETIF_MSG_LINK)
 | |
| static int debug = -1;
 | |
| module_param(debug, int, 0);
 | |
| MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)");
 | |
| 
 | |
| static int igbvf_poll(struct napi_struct *napi, int budget);
 | |
| static void igbvf_reset(struct igbvf_adapter *);
 | |
| static void igbvf_set_interrupt_capability(struct igbvf_adapter *);
 | |
| static void igbvf_reset_interrupt_capability(struct igbvf_adapter *);
 | |
| 
 | |
| static struct igbvf_info igbvf_vf_info = {
 | |
| 	.mac                    = e1000_vfadapt,
 | |
| 	.flags                  = 0,
 | |
| 	.pba                    = 10,
 | |
| 	.init_ops               = e1000_init_function_pointers_vf,
 | |
| };
 | |
| 
 | |
| static struct igbvf_info igbvf_i350_vf_info = {
 | |
| 	.mac			= e1000_vfadapt_i350,
 | |
| 	.flags			= 0,
 | |
| 	.pba			= 10,
 | |
| 	.init_ops		= e1000_init_function_pointers_vf,
 | |
| };
 | |
| 
 | |
| static const struct igbvf_info *igbvf_info_tbl[] = {
 | |
| 	[board_vf]              = &igbvf_vf_info,
 | |
| 	[board_i350_vf]		= &igbvf_i350_vf_info,
 | |
| };
 | |
| 
 | |
| /**
 | |
|  * igbvf_desc_unused - calculate if we have unused descriptors
 | |
|  **/
 | |
| static int igbvf_desc_unused(struct igbvf_ring *ring)
 | |
| {
 | |
| 	if (ring->next_to_clean > ring->next_to_use)
 | |
| 		return ring->next_to_clean - ring->next_to_use - 1;
 | |
| 
 | |
| 	return ring->count + ring->next_to_clean - ring->next_to_use - 1;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * igbvf_receive_skb - helper function to handle Rx indications
 | |
|  * @adapter: board private structure
 | |
|  * @status: descriptor status field as written by hardware
 | |
|  * @vlan: descriptor vlan field as written by hardware (no le/be conversion)
 | |
|  * @skb: pointer to sk_buff to be indicated to stack
 | |
|  **/
 | |
| static void igbvf_receive_skb(struct igbvf_adapter *adapter,
 | |
|                               struct net_device *netdev,
 | |
|                               struct sk_buff *skb,
 | |
|                               u32 status, u16 vlan)
 | |
| {
 | |
| 	u16 vid;
 | |
| 
 | |
| 	if (status & E1000_RXD_STAT_VP) {
 | |
| 		if ((adapter->flags & IGBVF_FLAG_RX_LB_VLAN_BSWAP) &&
 | |
| 		    (status & E1000_RXDEXT_STATERR_LB))
 | |
| 			vid = be16_to_cpu(vlan) & E1000_RXD_SPC_VLAN_MASK;
 | |
| 		else
 | |
| 			vid = le16_to_cpu(vlan) & E1000_RXD_SPC_VLAN_MASK;
 | |
| 		if (test_bit(vid, adapter->active_vlans))
 | |
| 			__vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), vid);
 | |
| 	}
 | |
| 
 | |
| 	napi_gro_receive(&adapter->rx_ring->napi, skb);
 | |
| }
 | |
| 
 | |
| static inline void igbvf_rx_checksum_adv(struct igbvf_adapter *adapter,
 | |
|                                          u32 status_err, struct sk_buff *skb)
 | |
| {
 | |
| 	skb_checksum_none_assert(skb);
 | |
| 
 | |
| 	/* Ignore Checksum bit is set or checksum is disabled through ethtool */
 | |
| 	if ((status_err & E1000_RXD_STAT_IXSM) ||
 | |
| 	    (adapter->flags & IGBVF_FLAG_RX_CSUM_DISABLED))
 | |
| 		return;
 | |
| 
 | |
| 	/* TCP/UDP checksum error bit is set */
 | |
| 	if (status_err &
 | |
| 	    (E1000_RXDEXT_STATERR_TCPE | E1000_RXDEXT_STATERR_IPE)) {
 | |
| 		/* let the stack verify checksum errors */
 | |
| 		adapter->hw_csum_err++;
 | |
| 		return;
 | |
| 	}
 | |
| 
 | |
| 	/* It must be a TCP or UDP packet with a valid checksum */
 | |
| 	if (status_err & (E1000_RXD_STAT_TCPCS | E1000_RXD_STAT_UDPCS))
 | |
| 		skb->ip_summed = CHECKSUM_UNNECESSARY;
 | |
| 
 | |
| 	adapter->hw_csum_good++;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * igbvf_alloc_rx_buffers - Replace used receive buffers; packet split
 | |
|  * @rx_ring: address of ring structure to repopulate
 | |
|  * @cleaned_count: number of buffers to repopulate
 | |
|  **/
 | |
| static void igbvf_alloc_rx_buffers(struct igbvf_ring *rx_ring,
 | |
|                                    int cleaned_count)
 | |
| {
 | |
| 	struct igbvf_adapter *adapter = rx_ring->adapter;
 | |
| 	struct net_device *netdev = adapter->netdev;
 | |
| 	struct pci_dev *pdev = adapter->pdev;
 | |
| 	union e1000_adv_rx_desc *rx_desc;
 | |
| 	struct igbvf_buffer *buffer_info;
 | |
| 	struct sk_buff *skb;
 | |
| 	unsigned int i;
 | |
| 	int bufsz;
 | |
| 
 | |
| 	i = rx_ring->next_to_use;
 | |
| 	buffer_info = &rx_ring->buffer_info[i];
 | |
| 
 | |
| 	if (adapter->rx_ps_hdr_size)
 | |
| 		bufsz = adapter->rx_ps_hdr_size;
 | |
| 	else
 | |
| 		bufsz = adapter->rx_buffer_len;
 | |
| 
 | |
| 	while (cleaned_count--) {
 | |
| 		rx_desc = IGBVF_RX_DESC_ADV(*rx_ring, i);
 | |
| 
 | |
| 		if (adapter->rx_ps_hdr_size && !buffer_info->page_dma) {
 | |
| 			if (!buffer_info->page) {
 | |
| 				buffer_info->page = alloc_page(GFP_ATOMIC);
 | |
| 				if (!buffer_info->page) {
 | |
| 					adapter->alloc_rx_buff_failed++;
 | |
| 					goto no_buffers;
 | |
| 				}
 | |
| 				buffer_info->page_offset = 0;
 | |
| 			} else {
 | |
| 				buffer_info->page_offset ^= PAGE_SIZE / 2;
 | |
| 			}
 | |
| 			buffer_info->page_dma =
 | |
| 				dma_map_page(&pdev->dev, buffer_info->page,
 | |
| 				             buffer_info->page_offset,
 | |
| 				             PAGE_SIZE / 2,
 | |
| 					     DMA_FROM_DEVICE);
 | |
| 			if (dma_mapping_error(&pdev->dev,
 | |
| 					      buffer_info->page_dma)) {
 | |
| 				__free_page(buffer_info->page);
 | |
| 				buffer_info->page = NULL;
 | |
| 				dev_err(&pdev->dev, "RX DMA map failed\n");
 | |
| 				break;
 | |
| 			}
 | |
| 		}
 | |
| 
 | |
| 		if (!buffer_info->skb) {
 | |
| 			skb = netdev_alloc_skb_ip_align(netdev, bufsz);
 | |
| 			if (!skb) {
 | |
| 				adapter->alloc_rx_buff_failed++;
 | |
| 				goto no_buffers;
 | |
| 			}
 | |
| 
 | |
| 			buffer_info->skb = skb;
 | |
| 			buffer_info->dma = dma_map_single(&pdev->dev, skb->data,
 | |
| 			                                  bufsz,
 | |
| 							  DMA_FROM_DEVICE);
 | |
| 			if (dma_mapping_error(&pdev->dev, buffer_info->dma)) {
 | |
| 				dev_kfree_skb(buffer_info->skb);
 | |
| 				buffer_info->skb = NULL;
 | |
| 				dev_err(&pdev->dev, "RX DMA map failed\n");
 | |
| 				goto no_buffers;
 | |
| 			}
 | |
| 		}
 | |
| 		/* Refresh the desc even if buffer_addrs didn't change because
 | |
| 		 * each write-back erases this info. */
 | |
| 		if (adapter->rx_ps_hdr_size) {
 | |
| 			rx_desc->read.pkt_addr =
 | |
| 			     cpu_to_le64(buffer_info->page_dma);
 | |
| 			rx_desc->read.hdr_addr = cpu_to_le64(buffer_info->dma);
 | |
| 		} else {
 | |
| 			rx_desc->read.pkt_addr =
 | |
| 			     cpu_to_le64(buffer_info->dma);
 | |
| 			rx_desc->read.hdr_addr = 0;
 | |
| 		}
 | |
| 
 | |
| 		i++;
 | |
| 		if (i == rx_ring->count)
 | |
| 			i = 0;
 | |
| 		buffer_info = &rx_ring->buffer_info[i];
 | |
| 	}
 | |
| 
 | |
| no_buffers:
 | |
| 	if (rx_ring->next_to_use != i) {
 | |
| 		rx_ring->next_to_use = i;
 | |
| 		if (i == 0)
 | |
| 			i = (rx_ring->count - 1);
 | |
| 		else
 | |
| 			i--;
 | |
| 
 | |
| 		/* Force memory writes to complete before letting h/w
 | |
| 		 * know there are new descriptors to fetch.  (Only
 | |
| 		 * applicable for weak-ordered memory model archs,
 | |
| 		 * such as IA-64). */
 | |
| 		wmb();
 | |
| 		writel(i, adapter->hw.hw_addr + rx_ring->tail);
 | |
| 	}
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * igbvf_clean_rx_irq - Send received data up the network stack; legacy
 | |
|  * @adapter: board private structure
 | |
|  *
 | |
|  * the return value indicates whether actual cleaning was done, there
 | |
|  * is no guarantee that everything was cleaned
 | |
|  **/
 | |
| static bool igbvf_clean_rx_irq(struct igbvf_adapter *adapter,
 | |
|                                int *work_done, int work_to_do)
 | |
| {
 | |
| 	struct igbvf_ring *rx_ring = adapter->rx_ring;
 | |
| 	struct net_device *netdev = adapter->netdev;
 | |
| 	struct pci_dev *pdev = adapter->pdev;
 | |
| 	union e1000_adv_rx_desc *rx_desc, *next_rxd;
 | |
| 	struct igbvf_buffer *buffer_info, *next_buffer;
 | |
| 	struct sk_buff *skb;
 | |
| 	bool cleaned = false;
 | |
| 	int cleaned_count = 0;
 | |
| 	unsigned int total_bytes = 0, total_packets = 0;
 | |
| 	unsigned int i;
 | |
| 	u32 length, hlen, staterr;
 | |
| 
 | |
| 	i = rx_ring->next_to_clean;
 | |
| 	rx_desc = IGBVF_RX_DESC_ADV(*rx_ring, i);
 | |
| 	staterr = le32_to_cpu(rx_desc->wb.upper.status_error);
 | |
| 
 | |
| 	while (staterr & E1000_RXD_STAT_DD) {
 | |
| 		if (*work_done >= work_to_do)
 | |
| 			break;
 | |
| 		(*work_done)++;
 | |
| 		rmb(); /* read descriptor and rx_buffer_info after status DD */
 | |
| 
 | |
| 		buffer_info = &rx_ring->buffer_info[i];
 | |
| 
 | |
| 		/* HW will not DMA in data larger than the given buffer, even
 | |
| 		 * if it parses the (NFS, of course) header to be larger.  In
 | |
| 		 * that case, it fills the header buffer and spills the rest
 | |
| 		 * into the page.
 | |
| 		 */
 | |
| 		hlen = (le16_to_cpu(rx_desc->wb.lower.lo_dword.hs_rss.hdr_info) &
 | |
| 		  E1000_RXDADV_HDRBUFLEN_MASK) >> E1000_RXDADV_HDRBUFLEN_SHIFT;
 | |
| 		if (hlen > adapter->rx_ps_hdr_size)
 | |
| 			hlen = adapter->rx_ps_hdr_size;
 | |
| 
 | |
| 		length = le16_to_cpu(rx_desc->wb.upper.length);
 | |
| 		cleaned = true;
 | |
| 		cleaned_count++;
 | |
| 
 | |
| 		skb = buffer_info->skb;
 | |
| 		prefetch(skb->data - NET_IP_ALIGN);
 | |
| 		buffer_info->skb = NULL;
 | |
| 		if (!adapter->rx_ps_hdr_size) {
 | |
| 			dma_unmap_single(&pdev->dev, buffer_info->dma,
 | |
| 			                 adapter->rx_buffer_len,
 | |
| 					 DMA_FROM_DEVICE);
 | |
| 			buffer_info->dma = 0;
 | |
| 			skb_put(skb, length);
 | |
| 			goto send_up;
 | |
| 		}
 | |
| 
 | |
| 		if (!skb_shinfo(skb)->nr_frags) {
 | |
| 			dma_unmap_single(&pdev->dev, buffer_info->dma,
 | |
| 			                 adapter->rx_ps_hdr_size,
 | |
| 					 DMA_FROM_DEVICE);
 | |
| 			skb_put(skb, hlen);
 | |
| 		}
 | |
| 
 | |
| 		if (length) {
 | |
| 			dma_unmap_page(&pdev->dev, buffer_info->page_dma,
 | |
| 			               PAGE_SIZE / 2,
 | |
| 				       DMA_FROM_DEVICE);
 | |
| 			buffer_info->page_dma = 0;
 | |
| 
 | |
| 			skb_fill_page_desc(skb, skb_shinfo(skb)->nr_frags,
 | |
| 			                   buffer_info->page,
 | |
| 			                   buffer_info->page_offset,
 | |
| 			                   length);
 | |
| 
 | |
| 			if ((adapter->rx_buffer_len > (PAGE_SIZE / 2)) ||
 | |
| 			    (page_count(buffer_info->page) != 1))
 | |
| 				buffer_info->page = NULL;
 | |
| 			else
 | |
| 				get_page(buffer_info->page);
 | |
| 
 | |
| 			skb->len += length;
 | |
| 			skb->data_len += length;
 | |
| 			skb->truesize += PAGE_SIZE / 2;
 | |
| 		}
 | |
| send_up:
 | |
| 		i++;
 | |
| 		if (i == rx_ring->count)
 | |
| 			i = 0;
 | |
| 		next_rxd = IGBVF_RX_DESC_ADV(*rx_ring, i);
 | |
| 		prefetch(next_rxd);
 | |
| 		next_buffer = &rx_ring->buffer_info[i];
 | |
| 
 | |
| 		if (!(staterr & E1000_RXD_STAT_EOP)) {
 | |
| 			buffer_info->skb = next_buffer->skb;
 | |
| 			buffer_info->dma = next_buffer->dma;
 | |
| 			next_buffer->skb = skb;
 | |
| 			next_buffer->dma = 0;
 | |
| 			goto next_desc;
 | |
| 		}
 | |
| 
 | |
| 		if (staterr & E1000_RXDEXT_ERR_FRAME_ERR_MASK) {
 | |
| 			dev_kfree_skb_irq(skb);
 | |
| 			goto next_desc;
 | |
| 		}
 | |
| 
 | |
| 		total_bytes += skb->len;
 | |
| 		total_packets++;
 | |
| 
 | |
| 		igbvf_rx_checksum_adv(adapter, staterr, skb);
 | |
| 
 | |
| 		skb->protocol = eth_type_trans(skb, netdev);
 | |
| 
 | |
| 		igbvf_receive_skb(adapter, netdev, skb, staterr,
 | |
| 		                  rx_desc->wb.upper.vlan);
 | |
| 
 | |
| next_desc:
 | |
| 		rx_desc->wb.upper.status_error = 0;
 | |
| 
 | |
| 		/* return some buffers to hardware, one at a time is too slow */
 | |
| 		if (cleaned_count >= IGBVF_RX_BUFFER_WRITE) {
 | |
| 			igbvf_alloc_rx_buffers(rx_ring, cleaned_count);
 | |
| 			cleaned_count = 0;
 | |
| 		}
 | |
| 
 | |
| 		/* use prefetched values */
 | |
| 		rx_desc = next_rxd;
 | |
| 		buffer_info = next_buffer;
 | |
| 
 | |
| 		staterr = le32_to_cpu(rx_desc->wb.upper.status_error);
 | |
| 	}
 | |
| 
 | |
| 	rx_ring->next_to_clean = i;
 | |
| 	cleaned_count = igbvf_desc_unused(rx_ring);
 | |
| 
 | |
| 	if (cleaned_count)
 | |
| 		igbvf_alloc_rx_buffers(rx_ring, cleaned_count);
 | |
| 
 | |
| 	adapter->total_rx_packets += total_packets;
 | |
| 	adapter->total_rx_bytes += total_bytes;
 | |
| 	adapter->net_stats.rx_bytes += total_bytes;
 | |
| 	adapter->net_stats.rx_packets += total_packets;
 | |
| 	return cleaned;
 | |
| }
 | |
| 
 | |
| static void igbvf_put_txbuf(struct igbvf_adapter *adapter,
 | |
|                             struct igbvf_buffer *buffer_info)
 | |
| {
 | |
| 	if (buffer_info->dma) {
 | |
| 		if (buffer_info->mapped_as_page)
 | |
| 			dma_unmap_page(&adapter->pdev->dev,
 | |
| 				       buffer_info->dma,
 | |
| 				       buffer_info->length,
 | |
| 				       DMA_TO_DEVICE);
 | |
| 		else
 | |
| 			dma_unmap_single(&adapter->pdev->dev,
 | |
| 					 buffer_info->dma,
 | |
| 					 buffer_info->length,
 | |
| 					 DMA_TO_DEVICE);
 | |
| 		buffer_info->dma = 0;
 | |
| 	}
 | |
| 	if (buffer_info->skb) {
 | |
| 		dev_kfree_skb_any(buffer_info->skb);
 | |
| 		buffer_info->skb = NULL;
 | |
| 	}
 | |
| 	buffer_info->time_stamp = 0;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * igbvf_setup_tx_resources - allocate Tx resources (Descriptors)
 | |
|  * @adapter: board private structure
 | |
|  *
 | |
|  * Return 0 on success, negative on failure
 | |
|  **/
 | |
| int igbvf_setup_tx_resources(struct igbvf_adapter *adapter,
 | |
|                              struct igbvf_ring *tx_ring)
 | |
| {
 | |
| 	struct pci_dev *pdev = adapter->pdev;
 | |
| 	int size;
 | |
| 
 | |
| 	size = sizeof(struct igbvf_buffer) * tx_ring->count;
 | |
| 	tx_ring->buffer_info = vzalloc(size);
 | |
| 	if (!tx_ring->buffer_info)
 | |
| 		goto err;
 | |
| 
 | |
| 	/* round up to nearest 4K */
 | |
| 	tx_ring->size = tx_ring->count * sizeof(union e1000_adv_tx_desc);
 | |
| 	tx_ring->size = ALIGN(tx_ring->size, 4096);
 | |
| 
 | |
| 	tx_ring->desc = dma_alloc_coherent(&pdev->dev, tx_ring->size,
 | |
| 					   &tx_ring->dma, GFP_KERNEL);
 | |
| 	if (!tx_ring->desc)
 | |
| 		goto err;
 | |
| 
 | |
| 	tx_ring->adapter = adapter;
 | |
| 	tx_ring->next_to_use = 0;
 | |
| 	tx_ring->next_to_clean = 0;
 | |
| 
 | |
| 	return 0;
 | |
| err:
 | |
| 	vfree(tx_ring->buffer_info);
 | |
| 	dev_err(&adapter->pdev->dev,
 | |
| 	        "Unable to allocate memory for the transmit descriptor ring\n");
 | |
| 	return -ENOMEM;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * igbvf_setup_rx_resources - allocate Rx resources (Descriptors)
 | |
|  * @adapter: board private structure
 | |
|  *
 | |
|  * Returns 0 on success, negative on failure
 | |
|  **/
 | |
| int igbvf_setup_rx_resources(struct igbvf_adapter *adapter,
 | |
| 			     struct igbvf_ring *rx_ring)
 | |
| {
 | |
| 	struct pci_dev *pdev = adapter->pdev;
 | |
| 	int size, desc_len;
 | |
| 
 | |
| 	size = sizeof(struct igbvf_buffer) * rx_ring->count;
 | |
| 	rx_ring->buffer_info = vzalloc(size);
 | |
| 	if (!rx_ring->buffer_info)
 | |
| 		goto err;
 | |
| 
 | |
| 	desc_len = sizeof(union e1000_adv_rx_desc);
 | |
| 
 | |
| 	/* Round up to nearest 4K */
 | |
| 	rx_ring->size = rx_ring->count * desc_len;
 | |
| 	rx_ring->size = ALIGN(rx_ring->size, 4096);
 | |
| 
 | |
| 	rx_ring->desc = dma_alloc_coherent(&pdev->dev, rx_ring->size,
 | |
| 					   &rx_ring->dma, GFP_KERNEL);
 | |
| 	if (!rx_ring->desc)
 | |
| 		goto err;
 | |
| 
 | |
| 	rx_ring->next_to_clean = 0;
 | |
| 	rx_ring->next_to_use = 0;
 | |
| 
 | |
| 	rx_ring->adapter = adapter;
 | |
| 
 | |
| 	return 0;
 | |
| 
 | |
| err:
 | |
| 	vfree(rx_ring->buffer_info);
 | |
| 	rx_ring->buffer_info = NULL;
 | |
| 	dev_err(&adapter->pdev->dev,
 | |
| 	        "Unable to allocate memory for the receive descriptor ring\n");
 | |
| 	return -ENOMEM;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * igbvf_clean_tx_ring - Free Tx Buffers
 | |
|  * @tx_ring: ring to be cleaned
 | |
|  **/
 | |
| static void igbvf_clean_tx_ring(struct igbvf_ring *tx_ring)
 | |
| {
 | |
| 	struct igbvf_adapter *adapter = tx_ring->adapter;
 | |
| 	struct igbvf_buffer *buffer_info;
 | |
| 	unsigned long size;
 | |
| 	unsigned int i;
 | |
| 
 | |
| 	if (!tx_ring->buffer_info)
 | |
| 		return;
 | |
| 
 | |
| 	/* Free all the Tx ring sk_buffs */
 | |
| 	for (i = 0; i < tx_ring->count; i++) {
 | |
| 		buffer_info = &tx_ring->buffer_info[i];
 | |
| 		igbvf_put_txbuf(adapter, buffer_info);
 | |
| 	}
 | |
| 
 | |
| 	size = sizeof(struct igbvf_buffer) * tx_ring->count;
 | |
| 	memset(tx_ring->buffer_info, 0, size);
 | |
| 
 | |
| 	/* Zero out the descriptor ring */
 | |
| 	memset(tx_ring->desc, 0, tx_ring->size);
 | |
| 
 | |
| 	tx_ring->next_to_use = 0;
 | |
| 	tx_ring->next_to_clean = 0;
 | |
| 
 | |
| 	writel(0, adapter->hw.hw_addr + tx_ring->head);
 | |
| 	writel(0, adapter->hw.hw_addr + tx_ring->tail);
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * igbvf_free_tx_resources - Free Tx Resources per Queue
 | |
|  * @tx_ring: ring to free resources from
 | |
|  *
 | |
|  * Free all transmit software resources
 | |
|  **/
 | |
| void igbvf_free_tx_resources(struct igbvf_ring *tx_ring)
 | |
| {
 | |
| 	struct pci_dev *pdev = tx_ring->adapter->pdev;
 | |
| 
 | |
| 	igbvf_clean_tx_ring(tx_ring);
 | |
| 
 | |
| 	vfree(tx_ring->buffer_info);
 | |
| 	tx_ring->buffer_info = NULL;
 | |
| 
 | |
| 	dma_free_coherent(&pdev->dev, tx_ring->size, tx_ring->desc,
 | |
| 			  tx_ring->dma);
 | |
| 
 | |
| 	tx_ring->desc = NULL;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * igbvf_clean_rx_ring - Free Rx Buffers per Queue
 | |
|  * @adapter: board private structure
 | |
|  **/
 | |
| static void igbvf_clean_rx_ring(struct igbvf_ring *rx_ring)
 | |
| {
 | |
| 	struct igbvf_adapter *adapter = rx_ring->adapter;
 | |
| 	struct igbvf_buffer *buffer_info;
 | |
| 	struct pci_dev *pdev = adapter->pdev;
 | |
| 	unsigned long size;
 | |
| 	unsigned int i;
 | |
| 
 | |
| 	if (!rx_ring->buffer_info)
 | |
| 		return;
 | |
| 
 | |
| 	/* Free all the Rx ring sk_buffs */
 | |
| 	for (i = 0; i < rx_ring->count; i++) {
 | |
| 		buffer_info = &rx_ring->buffer_info[i];
 | |
| 		if (buffer_info->dma) {
 | |
| 			if (adapter->rx_ps_hdr_size){
 | |
| 				dma_unmap_single(&pdev->dev, buffer_info->dma,
 | |
| 				                 adapter->rx_ps_hdr_size,
 | |
| 						 DMA_FROM_DEVICE);
 | |
| 			} else {
 | |
| 				dma_unmap_single(&pdev->dev, buffer_info->dma,
 | |
| 				                 adapter->rx_buffer_len,
 | |
| 						 DMA_FROM_DEVICE);
 | |
| 			}
 | |
| 			buffer_info->dma = 0;
 | |
| 		}
 | |
| 
 | |
| 		if (buffer_info->skb) {
 | |
| 			dev_kfree_skb(buffer_info->skb);
 | |
| 			buffer_info->skb = NULL;
 | |
| 		}
 | |
| 
 | |
| 		if (buffer_info->page) {
 | |
| 			if (buffer_info->page_dma)
 | |
| 				dma_unmap_page(&pdev->dev,
 | |
| 					       buffer_info->page_dma,
 | |
| 				               PAGE_SIZE / 2,
 | |
| 					       DMA_FROM_DEVICE);
 | |
| 			put_page(buffer_info->page);
 | |
| 			buffer_info->page = NULL;
 | |
| 			buffer_info->page_dma = 0;
 | |
| 			buffer_info->page_offset = 0;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	size = sizeof(struct igbvf_buffer) * rx_ring->count;
 | |
| 	memset(rx_ring->buffer_info, 0, size);
 | |
| 
 | |
| 	/* Zero out the descriptor ring */
 | |
| 	memset(rx_ring->desc, 0, rx_ring->size);
 | |
| 
 | |
| 	rx_ring->next_to_clean = 0;
 | |
| 	rx_ring->next_to_use = 0;
 | |
| 
 | |
| 	writel(0, adapter->hw.hw_addr + rx_ring->head);
 | |
| 	writel(0, adapter->hw.hw_addr + rx_ring->tail);
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * igbvf_free_rx_resources - Free Rx Resources
 | |
|  * @rx_ring: ring to clean the resources from
 | |
|  *
 | |
|  * Free all receive software resources
 | |
|  **/
 | |
| 
 | |
| void igbvf_free_rx_resources(struct igbvf_ring *rx_ring)
 | |
| {
 | |
| 	struct pci_dev *pdev = rx_ring->adapter->pdev;
 | |
| 
 | |
| 	igbvf_clean_rx_ring(rx_ring);
 | |
| 
 | |
| 	vfree(rx_ring->buffer_info);
 | |
| 	rx_ring->buffer_info = NULL;
 | |
| 
 | |
| 	dma_free_coherent(&pdev->dev, rx_ring->size, rx_ring->desc,
 | |
| 	                  rx_ring->dma);
 | |
| 	rx_ring->desc = NULL;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * igbvf_update_itr - update the dynamic ITR value based on statistics
 | |
|  * @adapter: pointer to adapter
 | |
|  * @itr_setting: current adapter->itr
 | |
|  * @packets: the number of packets during this measurement interval
 | |
|  * @bytes: the number of bytes during this measurement interval
 | |
|  *
 | |
|  *      Stores a new ITR value based on packets and byte
 | |
|  *      counts during the last interrupt.  The advantage of per interrupt
 | |
|  *      computation is faster updates and more accurate ITR for the current
 | |
|  *      traffic pattern.  Constants in this function were computed
 | |
|  *      based on theoretical maximum wire speed and thresholds were set based
 | |
|  *      on testing data as well as attempting to minimize response time
 | |
|  *      while increasing bulk throughput.
 | |
|  **/
 | |
| static enum latency_range igbvf_update_itr(struct igbvf_adapter *adapter,
 | |
| 					   enum latency_range itr_setting,
 | |
| 					   int packets, int bytes)
 | |
| {
 | |
| 	enum latency_range retval = itr_setting;
 | |
| 
 | |
| 	if (packets == 0)
 | |
| 		goto update_itr_done;
 | |
| 
 | |
| 	switch (itr_setting) {
 | |
| 	case lowest_latency:
 | |
| 		/* handle TSO and jumbo frames */
 | |
| 		if (bytes/packets > 8000)
 | |
| 			retval = bulk_latency;
 | |
| 		else if ((packets < 5) && (bytes > 512))
 | |
| 			retval = low_latency;
 | |
| 		break;
 | |
| 	case low_latency:  /* 50 usec aka 20000 ints/s */
 | |
| 		if (bytes > 10000) {
 | |
| 			/* this if handles the TSO accounting */
 | |
| 			if (bytes/packets > 8000)
 | |
| 				retval = bulk_latency;
 | |
| 			else if ((packets < 10) || ((bytes/packets) > 1200))
 | |
| 				retval = bulk_latency;
 | |
| 			else if ((packets > 35))
 | |
| 				retval = lowest_latency;
 | |
| 		} else if (bytes/packets > 2000) {
 | |
| 			retval = bulk_latency;
 | |
| 		} else if (packets <= 2 && bytes < 512) {
 | |
| 			retval = lowest_latency;
 | |
| 		}
 | |
| 		break;
 | |
| 	case bulk_latency: /* 250 usec aka 4000 ints/s */
 | |
| 		if (bytes > 25000) {
 | |
| 			if (packets > 35)
 | |
| 				retval = low_latency;
 | |
| 		} else if (bytes < 6000) {
 | |
| 			retval = low_latency;
 | |
| 		}
 | |
| 		break;
 | |
| 	default:
 | |
| 		break;
 | |
| 	}
 | |
| 
 | |
| update_itr_done:
 | |
| 	return retval;
 | |
| }
 | |
| 
 | |
| static int igbvf_range_to_itr(enum latency_range current_range)
 | |
| {
 | |
| 	int new_itr;
 | |
| 
 | |
| 	switch (current_range) {
 | |
| 	/* counts and packets in update_itr are dependent on these numbers */
 | |
| 	case lowest_latency:
 | |
| 		new_itr = IGBVF_70K_ITR;
 | |
| 		break;
 | |
| 	case low_latency:
 | |
| 		new_itr = IGBVF_20K_ITR;
 | |
| 		break;
 | |
| 	case bulk_latency:
 | |
| 		new_itr = IGBVF_4K_ITR;
 | |
| 		break;
 | |
| 	default:
 | |
| 		new_itr = IGBVF_START_ITR;
 | |
| 		break;
 | |
| 	}
 | |
| 	return new_itr;
 | |
| }
 | |
| 
 | |
| static void igbvf_set_itr(struct igbvf_adapter *adapter)
 | |
| {
 | |
| 	u32 new_itr;
 | |
| 
 | |
| 	adapter->tx_ring->itr_range =
 | |
| 			igbvf_update_itr(adapter,
 | |
| 					 adapter->tx_ring->itr_val,
 | |
| 					 adapter->total_tx_packets,
 | |
| 					 adapter->total_tx_bytes);
 | |
| 
 | |
| 	/* conservative mode (itr 3) eliminates the lowest_latency setting */
 | |
| 	if (adapter->requested_itr == 3 &&
 | |
| 	    adapter->tx_ring->itr_range == lowest_latency)
 | |
| 		adapter->tx_ring->itr_range = low_latency;
 | |
| 
 | |
| 	new_itr = igbvf_range_to_itr(adapter->tx_ring->itr_range);
 | |
| 
 | |
| 
 | |
| 	if (new_itr != adapter->tx_ring->itr_val) {
 | |
| 		u32 current_itr = adapter->tx_ring->itr_val;
 | |
| 		/*
 | |
| 		 * this attempts to bias the interrupt rate towards Bulk
 | |
| 		 * by adding intermediate steps when interrupt rate is
 | |
| 		 * increasing
 | |
| 		 */
 | |
| 		new_itr = new_itr > current_itr ?
 | |
| 			     min(current_itr + (new_itr >> 2), new_itr) :
 | |
| 			     new_itr;
 | |
| 		adapter->tx_ring->itr_val = new_itr;
 | |
| 
 | |
| 		adapter->tx_ring->set_itr = 1;
 | |
| 	}
 | |
| 
 | |
| 	adapter->rx_ring->itr_range =
 | |
| 			igbvf_update_itr(adapter, adapter->rx_ring->itr_val,
 | |
| 					 adapter->total_rx_packets,
 | |
| 					 adapter->total_rx_bytes);
 | |
| 	if (adapter->requested_itr == 3 &&
 | |
| 	    adapter->rx_ring->itr_range == lowest_latency)
 | |
| 		adapter->rx_ring->itr_range = low_latency;
 | |
| 
 | |
| 	new_itr = igbvf_range_to_itr(adapter->rx_ring->itr_range);
 | |
| 
 | |
| 	if (new_itr != adapter->rx_ring->itr_val) {
 | |
| 		u32 current_itr = adapter->rx_ring->itr_val;
 | |
| 		new_itr = new_itr > current_itr ?
 | |
| 			     min(current_itr + (new_itr >> 2), new_itr) :
 | |
| 			     new_itr;
 | |
| 		adapter->rx_ring->itr_val = new_itr;
 | |
| 
 | |
| 		adapter->rx_ring->set_itr = 1;
 | |
| 	}
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * igbvf_clean_tx_irq - Reclaim resources after transmit completes
 | |
|  * @adapter: board private structure
 | |
|  *
 | |
|  * returns true if ring is completely cleaned
 | |
|  **/
 | |
| static bool igbvf_clean_tx_irq(struct igbvf_ring *tx_ring)
 | |
| {
 | |
| 	struct igbvf_adapter *adapter = tx_ring->adapter;
 | |
| 	struct net_device *netdev = adapter->netdev;
 | |
| 	struct igbvf_buffer *buffer_info;
 | |
| 	struct sk_buff *skb;
 | |
| 	union e1000_adv_tx_desc *tx_desc, *eop_desc;
 | |
| 	unsigned int total_bytes = 0, total_packets = 0;
 | |
| 	unsigned int i, count = 0;
 | |
| 	bool cleaned = false;
 | |
| 
 | |
| 	i = tx_ring->next_to_clean;
 | |
| 	buffer_info = &tx_ring->buffer_info[i];
 | |
| 	eop_desc = buffer_info->next_to_watch;
 | |
| 
 | |
| 	do {
 | |
| 		/* if next_to_watch is not set then there is no work pending */
 | |
| 		if (!eop_desc)
 | |
| 			break;
 | |
| 
 | |
| 		/* prevent any other reads prior to eop_desc */
 | |
| 		read_barrier_depends();
 | |
| 
 | |
| 		/* if DD is not set pending work has not been completed */
 | |
| 		if (!(eop_desc->wb.status & cpu_to_le32(E1000_TXD_STAT_DD)))
 | |
| 			break;
 | |
| 
 | |
| 		/* clear next_to_watch to prevent false hangs */
 | |
| 		buffer_info->next_to_watch = NULL;
 | |
| 
 | |
| 		for (cleaned = false; !cleaned; count++) {
 | |
| 			tx_desc = IGBVF_TX_DESC_ADV(*tx_ring, i);
 | |
| 			cleaned = (tx_desc == eop_desc);
 | |
| 			skb = buffer_info->skb;
 | |
| 
 | |
| 			if (skb) {
 | |
| 				unsigned int segs, bytecount;
 | |
| 
 | |
| 				/* gso_segs is currently only valid for tcp */
 | |
| 				segs = skb_shinfo(skb)->gso_segs ?: 1;
 | |
| 				/* multiply data chunks by size of headers */
 | |
| 				bytecount = ((segs - 1) * skb_headlen(skb)) +
 | |
| 				            skb->len;
 | |
| 				total_packets += segs;
 | |
| 				total_bytes += bytecount;
 | |
| 			}
 | |
| 
 | |
| 			igbvf_put_txbuf(adapter, buffer_info);
 | |
| 			tx_desc->wb.status = 0;
 | |
| 
 | |
| 			i++;
 | |
| 			if (i == tx_ring->count)
 | |
| 				i = 0;
 | |
| 
 | |
| 			buffer_info = &tx_ring->buffer_info[i];
 | |
| 		}
 | |
| 
 | |
| 		eop_desc = buffer_info->next_to_watch;
 | |
| 	} while (count < tx_ring->count);
 | |
| 
 | |
| 	tx_ring->next_to_clean = i;
 | |
| 
 | |
| 	if (unlikely(count &&
 | |
| 	             netif_carrier_ok(netdev) &&
 | |
| 	             igbvf_desc_unused(tx_ring) >= IGBVF_TX_QUEUE_WAKE)) {
 | |
| 		/* Make sure that anybody stopping the queue after this
 | |
| 		 * sees the new next_to_clean.
 | |
| 		 */
 | |
| 		smp_mb();
 | |
| 		if (netif_queue_stopped(netdev) &&
 | |
| 		    !(test_bit(__IGBVF_DOWN, &adapter->state))) {
 | |
| 			netif_wake_queue(netdev);
 | |
| 			++adapter->restart_queue;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	adapter->net_stats.tx_bytes += total_bytes;
 | |
| 	adapter->net_stats.tx_packets += total_packets;
 | |
| 	return count < tx_ring->count;
 | |
| }
 | |
| 
 | |
| static irqreturn_t igbvf_msix_other(int irq, void *data)
 | |
| {
 | |
| 	struct net_device *netdev = data;
 | |
| 	struct igbvf_adapter *adapter = netdev_priv(netdev);
 | |
| 	struct e1000_hw *hw = &adapter->hw;
 | |
| 
 | |
| 	adapter->int_counter1++;
 | |
| 
 | |
| 	netif_carrier_off(netdev);
 | |
| 	hw->mac.get_link_status = 1;
 | |
| 	if (!test_bit(__IGBVF_DOWN, &adapter->state))
 | |
| 		mod_timer(&adapter->watchdog_timer, jiffies + 1);
 | |
| 
 | |
| 	ew32(EIMS, adapter->eims_other);
 | |
| 
 | |
| 	return IRQ_HANDLED;
 | |
| }
 | |
| 
 | |
| static irqreturn_t igbvf_intr_msix_tx(int irq, void *data)
 | |
| {
 | |
| 	struct net_device *netdev = data;
 | |
| 	struct igbvf_adapter *adapter = netdev_priv(netdev);
 | |
| 	struct e1000_hw *hw = &adapter->hw;
 | |
| 	struct igbvf_ring *tx_ring = adapter->tx_ring;
 | |
| 
 | |
| 	if (tx_ring->set_itr) {
 | |
| 		writel(tx_ring->itr_val,
 | |
| 		       adapter->hw.hw_addr + tx_ring->itr_register);
 | |
| 		adapter->tx_ring->set_itr = 0;
 | |
| 	}
 | |
| 
 | |
| 	adapter->total_tx_bytes = 0;
 | |
| 	adapter->total_tx_packets = 0;
 | |
| 
 | |
| 	/* auto mask will automatically reenable the interrupt when we write
 | |
| 	 * EICS */
 | |
| 	if (!igbvf_clean_tx_irq(tx_ring))
 | |
| 		/* Ring was not completely cleaned, so fire another interrupt */
 | |
| 		ew32(EICS, tx_ring->eims_value);
 | |
| 	else
 | |
| 		ew32(EIMS, tx_ring->eims_value);
 | |
| 
 | |
| 	return IRQ_HANDLED;
 | |
| }
 | |
| 
 | |
| static irqreturn_t igbvf_intr_msix_rx(int irq, void *data)
 | |
| {
 | |
| 	struct net_device *netdev = data;
 | |
| 	struct igbvf_adapter *adapter = netdev_priv(netdev);
 | |
| 
 | |
| 	adapter->int_counter0++;
 | |
| 
 | |
| 	/* Write the ITR value calculated at the end of the
 | |
| 	 * previous interrupt.
 | |
| 	 */
 | |
| 	if (adapter->rx_ring->set_itr) {
 | |
| 		writel(adapter->rx_ring->itr_val,
 | |
| 		       adapter->hw.hw_addr + adapter->rx_ring->itr_register);
 | |
| 		adapter->rx_ring->set_itr = 0;
 | |
| 	}
 | |
| 
 | |
| 	if (napi_schedule_prep(&adapter->rx_ring->napi)) {
 | |
| 		adapter->total_rx_bytes = 0;
 | |
| 		adapter->total_rx_packets = 0;
 | |
| 		__napi_schedule(&adapter->rx_ring->napi);
 | |
| 	}
 | |
| 
 | |
| 	return IRQ_HANDLED;
 | |
| }
 | |
| 
 | |
| #define IGBVF_NO_QUEUE -1
 | |
| 
 | |
| static void igbvf_assign_vector(struct igbvf_adapter *adapter, int rx_queue,
 | |
|                                 int tx_queue, int msix_vector)
 | |
| {
 | |
| 	struct e1000_hw *hw = &adapter->hw;
 | |
| 	u32 ivar, index;
 | |
| 
 | |
| 	/* 82576 uses a table-based method for assigning vectors.
 | |
| 	   Each queue has a single entry in the table to which we write
 | |
| 	   a vector number along with a "valid" bit.  Sadly, the layout
 | |
| 	   of the table is somewhat counterintuitive. */
 | |
| 	if (rx_queue > IGBVF_NO_QUEUE) {
 | |
| 		index = (rx_queue >> 1);
 | |
| 		ivar = array_er32(IVAR0, index);
 | |
| 		if (rx_queue & 0x1) {
 | |
| 			/* vector goes into third byte of register */
 | |
| 			ivar = ivar & 0xFF00FFFF;
 | |
| 			ivar |= (msix_vector | E1000_IVAR_VALID) << 16;
 | |
| 		} else {
 | |
| 			/* vector goes into low byte of register */
 | |
| 			ivar = ivar & 0xFFFFFF00;
 | |
| 			ivar |= msix_vector | E1000_IVAR_VALID;
 | |
| 		}
 | |
| 		adapter->rx_ring[rx_queue].eims_value = 1 << msix_vector;
 | |
| 		array_ew32(IVAR0, index, ivar);
 | |
| 	}
 | |
| 	if (tx_queue > IGBVF_NO_QUEUE) {
 | |
| 		index = (tx_queue >> 1);
 | |
| 		ivar = array_er32(IVAR0, index);
 | |
| 		if (tx_queue & 0x1) {
 | |
| 			/* vector goes into high byte of register */
 | |
| 			ivar = ivar & 0x00FFFFFF;
 | |
| 			ivar |= (msix_vector | E1000_IVAR_VALID) << 24;
 | |
| 		} else {
 | |
| 			/* vector goes into second byte of register */
 | |
| 			ivar = ivar & 0xFFFF00FF;
 | |
| 			ivar |= (msix_vector | E1000_IVAR_VALID) << 8;
 | |
| 		}
 | |
| 		adapter->tx_ring[tx_queue].eims_value = 1 << msix_vector;
 | |
| 		array_ew32(IVAR0, index, ivar);
 | |
| 	}
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * igbvf_configure_msix - Configure MSI-X hardware
 | |
|  *
 | |
|  * igbvf_configure_msix sets up the hardware to properly
 | |
|  * generate MSI-X interrupts.
 | |
|  **/
 | |
| static void igbvf_configure_msix(struct igbvf_adapter *adapter)
 | |
| {
 | |
| 	u32 tmp;
 | |
| 	struct e1000_hw *hw = &adapter->hw;
 | |
| 	struct igbvf_ring *tx_ring = adapter->tx_ring;
 | |
| 	struct igbvf_ring *rx_ring = adapter->rx_ring;
 | |
| 	int vector = 0;
 | |
| 
 | |
| 	adapter->eims_enable_mask = 0;
 | |
| 
 | |
| 	igbvf_assign_vector(adapter, IGBVF_NO_QUEUE, 0, vector++);
 | |
| 	adapter->eims_enable_mask |= tx_ring->eims_value;
 | |
| 	writel(tx_ring->itr_val, hw->hw_addr + tx_ring->itr_register);
 | |
| 	igbvf_assign_vector(adapter, 0, IGBVF_NO_QUEUE, vector++);
 | |
| 	adapter->eims_enable_mask |= rx_ring->eims_value;
 | |
| 	writel(rx_ring->itr_val, hw->hw_addr + rx_ring->itr_register);
 | |
| 
 | |
| 	/* set vector for other causes, i.e. link changes */
 | |
| 
 | |
| 	tmp = (vector++ | E1000_IVAR_VALID);
 | |
| 
 | |
| 	ew32(IVAR_MISC, tmp);
 | |
| 
 | |
| 	adapter->eims_enable_mask = (1 << (vector)) - 1;
 | |
| 	adapter->eims_other = 1 << (vector - 1);
 | |
| 	e1e_flush();
 | |
| }
 | |
| 
 | |
| static void igbvf_reset_interrupt_capability(struct igbvf_adapter *adapter)
 | |
| {
 | |
| 	if (adapter->msix_entries) {
 | |
| 		pci_disable_msix(adapter->pdev);
 | |
| 		kfree(adapter->msix_entries);
 | |
| 		adapter->msix_entries = NULL;
 | |
| 	}
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * igbvf_set_interrupt_capability - set MSI or MSI-X if supported
 | |
|  *
 | |
|  * Attempt to configure interrupts using the best available
 | |
|  * capabilities of the hardware and kernel.
 | |
|  **/
 | |
| static void igbvf_set_interrupt_capability(struct igbvf_adapter *adapter)
 | |
| {
 | |
| 	int err = -ENOMEM;
 | |
| 	int i;
 | |
| 
 | |
| 	/* we allocate 3 vectors, 1 for tx, 1 for rx, one for pf messages */
 | |
| 	adapter->msix_entries = kcalloc(3, sizeof(struct msix_entry),
 | |
| 	                                GFP_KERNEL);
 | |
| 	if (adapter->msix_entries) {
 | |
| 		for (i = 0; i < 3; i++)
 | |
| 			adapter->msix_entries[i].entry = i;
 | |
| 
 | |
| 		err = pci_enable_msix_range(adapter->pdev,
 | |
| 		                            adapter->msix_entries, 3, 3);
 | |
| 	}
 | |
| 
 | |
| 	if (err < 0) {
 | |
| 		/* MSI-X failed */
 | |
| 		dev_err(&adapter->pdev->dev,
 | |
| 		        "Failed to initialize MSI-X interrupts.\n");
 | |
| 		igbvf_reset_interrupt_capability(adapter);
 | |
| 	}
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * igbvf_request_msix - Initialize MSI-X interrupts
 | |
|  *
 | |
|  * igbvf_request_msix allocates MSI-X vectors and requests interrupts from the
 | |
|  * kernel.
 | |
|  **/
 | |
| static int igbvf_request_msix(struct igbvf_adapter *adapter)
 | |
| {
 | |
| 	struct net_device *netdev = adapter->netdev;
 | |
| 	int err = 0, vector = 0;
 | |
| 
 | |
| 	if (strlen(netdev->name) < (IFNAMSIZ - 5)) {
 | |
| 		sprintf(adapter->tx_ring->name, "%s-tx-0", netdev->name);
 | |
| 		sprintf(adapter->rx_ring->name, "%s-rx-0", netdev->name);
 | |
| 	} else {
 | |
| 		memcpy(adapter->tx_ring->name, netdev->name, IFNAMSIZ);
 | |
| 		memcpy(adapter->rx_ring->name, netdev->name, IFNAMSIZ);
 | |
| 	}
 | |
| 
 | |
| 	err = request_irq(adapter->msix_entries[vector].vector,
 | |
| 	                  igbvf_intr_msix_tx, 0, adapter->tx_ring->name,
 | |
| 	                  netdev);
 | |
| 	if (err)
 | |
| 		goto out;
 | |
| 
 | |
| 	adapter->tx_ring->itr_register = E1000_EITR(vector);
 | |
| 	adapter->tx_ring->itr_val = adapter->current_itr;
 | |
| 	vector++;
 | |
| 
 | |
| 	err = request_irq(adapter->msix_entries[vector].vector,
 | |
| 	                  igbvf_intr_msix_rx, 0, adapter->rx_ring->name,
 | |
| 	                  netdev);
 | |
| 	if (err)
 | |
| 		goto out;
 | |
| 
 | |
| 	adapter->rx_ring->itr_register = E1000_EITR(vector);
 | |
| 	adapter->rx_ring->itr_val = adapter->current_itr;
 | |
| 	vector++;
 | |
| 
 | |
| 	err = request_irq(adapter->msix_entries[vector].vector,
 | |
| 	                  igbvf_msix_other, 0, netdev->name, netdev);
 | |
| 	if (err)
 | |
| 		goto out;
 | |
| 
 | |
| 	igbvf_configure_msix(adapter);
 | |
| 	return 0;
 | |
| out:
 | |
| 	return err;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * igbvf_alloc_queues - Allocate memory for all rings
 | |
|  * @adapter: board private structure to initialize
 | |
|  **/
 | |
| static int igbvf_alloc_queues(struct igbvf_adapter *adapter)
 | |
| {
 | |
| 	struct net_device *netdev = adapter->netdev;
 | |
| 
 | |
| 	adapter->tx_ring = kzalloc(sizeof(struct igbvf_ring), GFP_KERNEL);
 | |
| 	if (!adapter->tx_ring)
 | |
| 		return -ENOMEM;
 | |
| 
 | |
| 	adapter->rx_ring = kzalloc(sizeof(struct igbvf_ring), GFP_KERNEL);
 | |
| 	if (!adapter->rx_ring) {
 | |
| 		kfree(adapter->tx_ring);
 | |
| 		return -ENOMEM;
 | |
| 	}
 | |
| 
 | |
| 	netif_napi_add(netdev, &adapter->rx_ring->napi, igbvf_poll, 64);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * igbvf_request_irq - initialize interrupts
 | |
|  *
 | |
|  * Attempts to configure interrupts using the best available
 | |
|  * capabilities of the hardware and kernel.
 | |
|  **/
 | |
| static int igbvf_request_irq(struct igbvf_adapter *adapter)
 | |
| {
 | |
| 	int err = -1;
 | |
| 
 | |
| 	/* igbvf supports msi-x only */
 | |
| 	if (adapter->msix_entries)
 | |
| 		err = igbvf_request_msix(adapter);
 | |
| 
 | |
| 	if (!err)
 | |
| 		return err;
 | |
| 
 | |
| 	dev_err(&adapter->pdev->dev,
 | |
| 	        "Unable to allocate interrupt, Error: %d\n", err);
 | |
| 
 | |
| 	return err;
 | |
| }
 | |
| 
 | |
| static void igbvf_free_irq(struct igbvf_adapter *adapter)
 | |
| {
 | |
| 	struct net_device *netdev = adapter->netdev;
 | |
| 	int vector;
 | |
| 
 | |
| 	if (adapter->msix_entries) {
 | |
| 		for (vector = 0; vector < 3; vector++)
 | |
| 			free_irq(adapter->msix_entries[vector].vector, netdev);
 | |
| 	}
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * igbvf_irq_disable - Mask off interrupt generation on the NIC
 | |
|  **/
 | |
| static void igbvf_irq_disable(struct igbvf_adapter *adapter)
 | |
| {
 | |
| 	struct e1000_hw *hw = &adapter->hw;
 | |
| 
 | |
| 	ew32(EIMC, ~0);
 | |
| 
 | |
| 	if (adapter->msix_entries)
 | |
| 		ew32(EIAC, 0);
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * igbvf_irq_enable - Enable default interrupt generation settings
 | |
|  **/
 | |
| static void igbvf_irq_enable(struct igbvf_adapter *adapter)
 | |
| {
 | |
| 	struct e1000_hw *hw = &adapter->hw;
 | |
| 
 | |
| 	ew32(EIAC, adapter->eims_enable_mask);
 | |
| 	ew32(EIAM, adapter->eims_enable_mask);
 | |
| 	ew32(EIMS, adapter->eims_enable_mask);
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * igbvf_poll - NAPI Rx polling callback
 | |
|  * @napi: struct associated with this polling callback
 | |
|  * @budget: amount of packets driver is allowed to process this poll
 | |
|  **/
 | |
| static int igbvf_poll(struct napi_struct *napi, int budget)
 | |
| {
 | |
| 	struct igbvf_ring *rx_ring = container_of(napi, struct igbvf_ring, napi);
 | |
| 	struct igbvf_adapter *adapter = rx_ring->adapter;
 | |
| 	struct e1000_hw *hw = &adapter->hw;
 | |
| 	int work_done = 0;
 | |
| 
 | |
| 	igbvf_clean_rx_irq(adapter, &work_done, budget);
 | |
| 
 | |
| 	/* If not enough Rx work done, exit the polling mode */
 | |
| 	if (work_done < budget) {
 | |
| 		napi_complete(napi);
 | |
| 
 | |
| 		if (adapter->requested_itr & 3)
 | |
| 			igbvf_set_itr(adapter);
 | |
| 
 | |
| 		if (!test_bit(__IGBVF_DOWN, &adapter->state))
 | |
| 			ew32(EIMS, adapter->rx_ring->eims_value);
 | |
| 	}
 | |
| 
 | |
| 	return work_done;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * igbvf_set_rlpml - set receive large packet maximum length
 | |
|  * @adapter: board private structure
 | |
|  *
 | |
|  * Configure the maximum size of packets that will be received
 | |
|  */
 | |
| static void igbvf_set_rlpml(struct igbvf_adapter *adapter)
 | |
| {
 | |
| 	int max_frame_size;
 | |
| 	struct e1000_hw *hw = &adapter->hw;
 | |
| 
 | |
| 	max_frame_size = adapter->max_frame_size + VLAN_TAG_SIZE;
 | |
| 	e1000_rlpml_set_vf(hw, max_frame_size);
 | |
| }
 | |
| 
 | |
| static int igbvf_vlan_rx_add_vid(struct net_device *netdev,
 | |
| 				 __be16 proto, u16 vid)
 | |
| {
 | |
| 	struct igbvf_adapter *adapter = netdev_priv(netdev);
 | |
| 	struct e1000_hw *hw = &adapter->hw;
 | |
| 
 | |
| 	if (hw->mac.ops.set_vfta(hw, vid, true)) {
 | |
| 		dev_err(&adapter->pdev->dev, "Failed to add vlan id %d\n", vid);
 | |
| 		return -EINVAL;
 | |
| 	}
 | |
| 	set_bit(vid, adapter->active_vlans);
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int igbvf_vlan_rx_kill_vid(struct net_device *netdev,
 | |
| 				  __be16 proto, u16 vid)
 | |
| {
 | |
| 	struct igbvf_adapter *adapter = netdev_priv(netdev);
 | |
| 	struct e1000_hw *hw = &adapter->hw;
 | |
| 
 | |
| 	if (hw->mac.ops.set_vfta(hw, vid, false)) {
 | |
| 		dev_err(&adapter->pdev->dev,
 | |
| 		        "Failed to remove vlan id %d\n", vid);
 | |
| 		return -EINVAL;
 | |
| 	}
 | |
| 	clear_bit(vid, adapter->active_vlans);
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static void igbvf_restore_vlan(struct igbvf_adapter *adapter)
 | |
| {
 | |
| 	u16 vid;
 | |
| 
 | |
| 	for_each_set_bit(vid, adapter->active_vlans, VLAN_N_VID)
 | |
| 		igbvf_vlan_rx_add_vid(adapter->netdev, htons(ETH_P_8021Q), vid);
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * igbvf_configure_tx - Configure Transmit Unit after Reset
 | |
|  * @adapter: board private structure
 | |
|  *
 | |
|  * Configure the Tx unit of the MAC after a reset.
 | |
|  **/
 | |
| static void igbvf_configure_tx(struct igbvf_adapter *adapter)
 | |
| {
 | |
| 	struct e1000_hw *hw = &adapter->hw;
 | |
| 	struct igbvf_ring *tx_ring = adapter->tx_ring;
 | |
| 	u64 tdba;
 | |
| 	u32 txdctl, dca_txctrl;
 | |
| 
 | |
| 	/* disable transmits */
 | |
| 	txdctl = er32(TXDCTL(0));
 | |
| 	ew32(TXDCTL(0), txdctl & ~E1000_TXDCTL_QUEUE_ENABLE);
 | |
| 	e1e_flush();
 | |
| 	msleep(10);
 | |
| 
 | |
| 	/* Setup the HW Tx Head and Tail descriptor pointers */
 | |
| 	ew32(TDLEN(0), tx_ring->count * sizeof(union e1000_adv_tx_desc));
 | |
| 	tdba = tx_ring->dma;
 | |
| 	ew32(TDBAL(0), (tdba & DMA_BIT_MASK(32)));
 | |
| 	ew32(TDBAH(0), (tdba >> 32));
 | |
| 	ew32(TDH(0), 0);
 | |
| 	ew32(TDT(0), 0);
 | |
| 	tx_ring->head = E1000_TDH(0);
 | |
| 	tx_ring->tail = E1000_TDT(0);
 | |
| 
 | |
| 	/* Turn off Relaxed Ordering on head write-backs.  The writebacks
 | |
| 	 * MUST be delivered in order or it will completely screw up
 | |
| 	 * our bookeeping.
 | |
| 	 */
 | |
| 	dca_txctrl = er32(DCA_TXCTRL(0));
 | |
| 	dca_txctrl &= ~E1000_DCA_TXCTRL_TX_WB_RO_EN;
 | |
| 	ew32(DCA_TXCTRL(0), dca_txctrl);
 | |
| 
 | |
| 	/* enable transmits */
 | |
| 	txdctl |= E1000_TXDCTL_QUEUE_ENABLE;
 | |
| 	ew32(TXDCTL(0), txdctl);
 | |
| 
 | |
| 	/* Setup Transmit Descriptor Settings for eop descriptor */
 | |
| 	adapter->txd_cmd = E1000_ADVTXD_DCMD_EOP | E1000_ADVTXD_DCMD_IFCS;
 | |
| 
 | |
| 	/* enable Report Status bit */
 | |
| 	adapter->txd_cmd |= E1000_ADVTXD_DCMD_RS;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * igbvf_setup_srrctl - configure the receive control registers
 | |
|  * @adapter: Board private structure
 | |
|  **/
 | |
| static void igbvf_setup_srrctl(struct igbvf_adapter *adapter)
 | |
| {
 | |
| 	struct e1000_hw *hw = &adapter->hw;
 | |
| 	u32 srrctl = 0;
 | |
| 
 | |
| 	srrctl &= ~(E1000_SRRCTL_DESCTYPE_MASK |
 | |
| 	            E1000_SRRCTL_BSIZEHDR_MASK |
 | |
| 	            E1000_SRRCTL_BSIZEPKT_MASK);
 | |
| 
 | |
| 	/* Enable queue drop to avoid head of line blocking */
 | |
| 	srrctl |= E1000_SRRCTL_DROP_EN;
 | |
| 
 | |
| 	/* Setup buffer sizes */
 | |
| 	srrctl |= ALIGN(adapter->rx_buffer_len, 1024) >>
 | |
| 	          E1000_SRRCTL_BSIZEPKT_SHIFT;
 | |
| 
 | |
| 	if (adapter->rx_buffer_len < 2048) {
 | |
| 		adapter->rx_ps_hdr_size = 0;
 | |
| 		srrctl |= E1000_SRRCTL_DESCTYPE_ADV_ONEBUF;
 | |
| 	} else {
 | |
| 		adapter->rx_ps_hdr_size = 128;
 | |
| 		srrctl |= adapter->rx_ps_hdr_size <<
 | |
| 		          E1000_SRRCTL_BSIZEHDRSIZE_SHIFT;
 | |
| 		srrctl |= E1000_SRRCTL_DESCTYPE_HDR_SPLIT_ALWAYS;
 | |
| 	}
 | |
| 
 | |
| 	ew32(SRRCTL(0), srrctl);
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * igbvf_configure_rx - Configure Receive Unit after Reset
 | |
|  * @adapter: board private structure
 | |
|  *
 | |
|  * Configure the Rx unit of the MAC after a reset.
 | |
|  **/
 | |
| static void igbvf_configure_rx(struct igbvf_adapter *adapter)
 | |
| {
 | |
| 	struct e1000_hw *hw = &adapter->hw;
 | |
| 	struct igbvf_ring *rx_ring = adapter->rx_ring;
 | |
| 	u64 rdba;
 | |
| 	u32 rdlen, rxdctl;
 | |
| 
 | |
| 	/* disable receives */
 | |
| 	rxdctl = er32(RXDCTL(0));
 | |
| 	ew32(RXDCTL(0), rxdctl & ~E1000_RXDCTL_QUEUE_ENABLE);
 | |
| 	e1e_flush();
 | |
| 	msleep(10);
 | |
| 
 | |
| 	rdlen = rx_ring->count * sizeof(union e1000_adv_rx_desc);
 | |
| 
 | |
| 	/*
 | |
| 	 * Setup the HW Rx Head and Tail Descriptor Pointers and
 | |
| 	 * the Base and Length of the Rx Descriptor Ring
 | |
| 	 */
 | |
| 	rdba = rx_ring->dma;
 | |
| 	ew32(RDBAL(0), (rdba & DMA_BIT_MASK(32)));
 | |
| 	ew32(RDBAH(0), (rdba >> 32));
 | |
| 	ew32(RDLEN(0), rx_ring->count * sizeof(union e1000_adv_rx_desc));
 | |
| 	rx_ring->head = E1000_RDH(0);
 | |
| 	rx_ring->tail = E1000_RDT(0);
 | |
| 	ew32(RDH(0), 0);
 | |
| 	ew32(RDT(0), 0);
 | |
| 
 | |
| 	rxdctl |= E1000_RXDCTL_QUEUE_ENABLE;
 | |
| 	rxdctl &= 0xFFF00000;
 | |
| 	rxdctl |= IGBVF_RX_PTHRESH;
 | |
| 	rxdctl |= IGBVF_RX_HTHRESH << 8;
 | |
| 	rxdctl |= IGBVF_RX_WTHRESH << 16;
 | |
| 
 | |
| 	igbvf_set_rlpml(adapter);
 | |
| 
 | |
| 	/* enable receives */
 | |
| 	ew32(RXDCTL(0), rxdctl);
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * igbvf_set_multi - Multicast and Promiscuous mode set
 | |
|  * @netdev: network interface device structure
 | |
|  *
 | |
|  * The set_multi entry point is called whenever the multicast address
 | |
|  * list or the network interface flags are updated.  This routine is
 | |
|  * responsible for configuring the hardware for proper multicast,
 | |
|  * promiscuous mode, and all-multi behavior.
 | |
|  **/
 | |
| static void igbvf_set_multi(struct net_device *netdev)
 | |
| {
 | |
| 	struct igbvf_adapter *adapter = netdev_priv(netdev);
 | |
| 	struct e1000_hw *hw = &adapter->hw;
 | |
| 	struct netdev_hw_addr *ha;
 | |
| 	u8  *mta_list = NULL;
 | |
| 	int i;
 | |
| 
 | |
| 	if (!netdev_mc_empty(netdev)) {
 | |
| 		mta_list = kmalloc_array(netdev_mc_count(netdev), ETH_ALEN,
 | |
| 					 GFP_ATOMIC);
 | |
| 		if (!mta_list)
 | |
| 			return;
 | |
| 	}
 | |
| 
 | |
| 	/* prepare a packed array of only addresses. */
 | |
| 	i = 0;
 | |
| 	netdev_for_each_mc_addr(ha, netdev)
 | |
| 		memcpy(mta_list + (i++ * ETH_ALEN), ha->addr, ETH_ALEN);
 | |
| 
 | |
| 	hw->mac.ops.update_mc_addr_list(hw, mta_list, i, 0, 0);
 | |
| 	kfree(mta_list);
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * igbvf_configure - configure the hardware for Rx and Tx
 | |
|  * @adapter: private board structure
 | |
|  **/
 | |
| static void igbvf_configure(struct igbvf_adapter *adapter)
 | |
| {
 | |
| 	igbvf_set_multi(adapter->netdev);
 | |
| 
 | |
| 	igbvf_restore_vlan(adapter);
 | |
| 
 | |
| 	igbvf_configure_tx(adapter);
 | |
| 	igbvf_setup_srrctl(adapter);
 | |
| 	igbvf_configure_rx(adapter);
 | |
| 	igbvf_alloc_rx_buffers(adapter->rx_ring,
 | |
| 	                       igbvf_desc_unused(adapter->rx_ring));
 | |
| }
 | |
| 
 | |
| /* igbvf_reset - bring the hardware into a known good state
 | |
|  *
 | |
|  * This function boots the hardware and enables some settings that
 | |
|  * require a configuration cycle of the hardware - those cannot be
 | |
|  * set/changed during runtime. After reset the device needs to be
 | |
|  * properly configured for Rx, Tx etc.
 | |
|  */
 | |
| static void igbvf_reset(struct igbvf_adapter *adapter)
 | |
| {
 | |
| 	struct e1000_mac_info *mac = &adapter->hw.mac;
 | |
| 	struct net_device *netdev = adapter->netdev;
 | |
| 	struct e1000_hw *hw = &adapter->hw;
 | |
| 
 | |
| 	/* Allow time for pending master requests to run */
 | |
| 	if (mac->ops.reset_hw(hw))
 | |
| 		dev_err(&adapter->pdev->dev, "PF still resetting\n");
 | |
| 
 | |
| 	mac->ops.init_hw(hw);
 | |
| 
 | |
| 	if (is_valid_ether_addr(adapter->hw.mac.addr)) {
 | |
| 		memcpy(netdev->dev_addr, adapter->hw.mac.addr,
 | |
| 		       netdev->addr_len);
 | |
| 		memcpy(netdev->perm_addr, adapter->hw.mac.addr,
 | |
| 		       netdev->addr_len);
 | |
| 	}
 | |
| 
 | |
| 	adapter->last_reset = jiffies;
 | |
| }
 | |
| 
 | |
| int igbvf_up(struct igbvf_adapter *adapter)
 | |
| {
 | |
| 	struct e1000_hw *hw = &adapter->hw;
 | |
| 
 | |
| 	/* hardware has been reset, we need to reload some things */
 | |
| 	igbvf_configure(adapter);
 | |
| 
 | |
| 	clear_bit(__IGBVF_DOWN, &adapter->state);
 | |
| 
 | |
| 	napi_enable(&adapter->rx_ring->napi);
 | |
| 	if (adapter->msix_entries)
 | |
| 		igbvf_configure_msix(adapter);
 | |
| 
 | |
| 	/* Clear any pending interrupts. */
 | |
| 	er32(EICR);
 | |
| 	igbvf_irq_enable(adapter);
 | |
| 
 | |
| 	/* start the watchdog */
 | |
| 	hw->mac.get_link_status = 1;
 | |
| 	mod_timer(&adapter->watchdog_timer, jiffies + 1);
 | |
| 
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| void igbvf_down(struct igbvf_adapter *adapter)
 | |
| {
 | |
| 	struct net_device *netdev = adapter->netdev;
 | |
| 	struct e1000_hw *hw = &adapter->hw;
 | |
| 	u32 rxdctl, txdctl;
 | |
| 
 | |
| 	/*
 | |
| 	 * signal that we're down so the interrupt handler does not
 | |
| 	 * reschedule our watchdog timer
 | |
| 	 */
 | |
| 	set_bit(__IGBVF_DOWN, &adapter->state);
 | |
| 
 | |
| 	/* disable receives in the hardware */
 | |
| 	rxdctl = er32(RXDCTL(0));
 | |
| 	ew32(RXDCTL(0), rxdctl & ~E1000_RXDCTL_QUEUE_ENABLE);
 | |
| 
 | |
| 	netif_stop_queue(netdev);
 | |
| 
 | |
| 	/* disable transmits in the hardware */
 | |
| 	txdctl = er32(TXDCTL(0));
 | |
| 	ew32(TXDCTL(0), txdctl & ~E1000_TXDCTL_QUEUE_ENABLE);
 | |
| 
 | |
| 	/* flush both disables and wait for them to finish */
 | |
| 	e1e_flush();
 | |
| 	msleep(10);
 | |
| 
 | |
| 	napi_disable(&adapter->rx_ring->napi);
 | |
| 
 | |
| 	igbvf_irq_disable(adapter);
 | |
| 
 | |
| 	del_timer_sync(&adapter->watchdog_timer);
 | |
| 
 | |
| 	netif_carrier_off(netdev);
 | |
| 
 | |
| 	/* record the stats before reset*/
 | |
| 	igbvf_update_stats(adapter);
 | |
| 
 | |
| 	adapter->link_speed = 0;
 | |
| 	adapter->link_duplex = 0;
 | |
| 
 | |
| 	igbvf_reset(adapter);
 | |
| 	igbvf_clean_tx_ring(adapter->tx_ring);
 | |
| 	igbvf_clean_rx_ring(adapter->rx_ring);
 | |
| }
 | |
| 
 | |
| void igbvf_reinit_locked(struct igbvf_adapter *adapter)
 | |
| {
 | |
| 	might_sleep();
 | |
| 	while (test_and_set_bit(__IGBVF_RESETTING, &adapter->state))
 | |
| 		msleep(1);
 | |
| 	igbvf_down(adapter);
 | |
| 	igbvf_up(adapter);
 | |
| 	clear_bit(__IGBVF_RESETTING, &adapter->state);
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * igbvf_sw_init - Initialize general software structures (struct igbvf_adapter)
 | |
|  * @adapter: board private structure to initialize
 | |
|  *
 | |
|  * igbvf_sw_init initializes the Adapter private data structure.
 | |
|  * Fields are initialized based on PCI device information and
 | |
|  * OS network device settings (MTU size).
 | |
|  **/
 | |
| static int igbvf_sw_init(struct igbvf_adapter *adapter)
 | |
| {
 | |
| 	struct net_device *netdev = adapter->netdev;
 | |
| 	s32 rc;
 | |
| 
 | |
| 	adapter->rx_buffer_len = ETH_FRAME_LEN + VLAN_HLEN + ETH_FCS_LEN;
 | |
| 	adapter->rx_ps_hdr_size = 0;
 | |
| 	adapter->max_frame_size = netdev->mtu + ETH_HLEN + ETH_FCS_LEN;
 | |
| 	adapter->min_frame_size = ETH_ZLEN + ETH_FCS_LEN;
 | |
| 
 | |
| 	adapter->tx_int_delay = 8;
 | |
| 	adapter->tx_abs_int_delay = 32;
 | |
| 	adapter->rx_int_delay = 0;
 | |
| 	adapter->rx_abs_int_delay = 8;
 | |
| 	adapter->requested_itr = 3;
 | |
| 	adapter->current_itr = IGBVF_START_ITR;
 | |
| 
 | |
| 	/* Set various function pointers */
 | |
| 	adapter->ei->init_ops(&adapter->hw);
 | |
| 
 | |
| 	rc = adapter->hw.mac.ops.init_params(&adapter->hw);
 | |
| 	if (rc)
 | |
| 		return rc;
 | |
| 
 | |
| 	rc = adapter->hw.mbx.ops.init_params(&adapter->hw);
 | |
| 	if (rc)
 | |
| 		return rc;
 | |
| 
 | |
| 	igbvf_set_interrupt_capability(adapter);
 | |
| 
 | |
| 	if (igbvf_alloc_queues(adapter))
 | |
| 		return -ENOMEM;
 | |
| 
 | |
| 	spin_lock_init(&adapter->tx_queue_lock);
 | |
| 
 | |
| 	/* Explicitly disable IRQ since the NIC can be in any state. */
 | |
| 	igbvf_irq_disable(adapter);
 | |
| 
 | |
| 	spin_lock_init(&adapter->stats_lock);
 | |
| 
 | |
| 	set_bit(__IGBVF_DOWN, &adapter->state);
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static void igbvf_initialize_last_counter_stats(struct igbvf_adapter *adapter)
 | |
| {
 | |
| 	struct e1000_hw *hw = &adapter->hw;
 | |
| 
 | |
| 	adapter->stats.last_gprc = er32(VFGPRC);
 | |
| 	adapter->stats.last_gorc = er32(VFGORC);
 | |
| 	adapter->stats.last_gptc = er32(VFGPTC);
 | |
| 	adapter->stats.last_gotc = er32(VFGOTC);
 | |
| 	adapter->stats.last_mprc = er32(VFMPRC);
 | |
| 	adapter->stats.last_gotlbc = er32(VFGOTLBC);
 | |
| 	adapter->stats.last_gptlbc = er32(VFGPTLBC);
 | |
| 	adapter->stats.last_gorlbc = er32(VFGORLBC);
 | |
| 	adapter->stats.last_gprlbc = er32(VFGPRLBC);
 | |
| 
 | |
| 	adapter->stats.base_gprc = er32(VFGPRC);
 | |
| 	adapter->stats.base_gorc = er32(VFGORC);
 | |
| 	adapter->stats.base_gptc = er32(VFGPTC);
 | |
| 	adapter->stats.base_gotc = er32(VFGOTC);
 | |
| 	adapter->stats.base_mprc = er32(VFMPRC);
 | |
| 	adapter->stats.base_gotlbc = er32(VFGOTLBC);
 | |
| 	adapter->stats.base_gptlbc = er32(VFGPTLBC);
 | |
| 	adapter->stats.base_gorlbc = er32(VFGORLBC);
 | |
| 	adapter->stats.base_gprlbc = er32(VFGPRLBC);
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * igbvf_open - Called when a network interface is made active
 | |
|  * @netdev: network interface device structure
 | |
|  *
 | |
|  * Returns 0 on success, negative value on failure
 | |
|  *
 | |
|  * The open entry point is called when a network interface is made
 | |
|  * active by the system (IFF_UP).  At this point all resources needed
 | |
|  * for transmit and receive operations are allocated, the interrupt
 | |
|  * handler is registered with the OS, the watchdog timer is started,
 | |
|  * and the stack is notified that the interface is ready.
 | |
|  **/
 | |
| static int igbvf_open(struct net_device *netdev)
 | |
| {
 | |
| 	struct igbvf_adapter *adapter = netdev_priv(netdev);
 | |
| 	struct e1000_hw *hw = &adapter->hw;
 | |
| 	int err;
 | |
| 
 | |
| 	/* disallow open during test */
 | |
| 	if (test_bit(__IGBVF_TESTING, &adapter->state))
 | |
| 		return -EBUSY;
 | |
| 
 | |
| 	/* allocate transmit descriptors */
 | |
| 	err = igbvf_setup_tx_resources(adapter, adapter->tx_ring);
 | |
| 	if (err)
 | |
| 		goto err_setup_tx;
 | |
| 
 | |
| 	/* allocate receive descriptors */
 | |
| 	err = igbvf_setup_rx_resources(adapter, adapter->rx_ring);
 | |
| 	if (err)
 | |
| 		goto err_setup_rx;
 | |
| 
 | |
| 	/*
 | |
| 	 * before we allocate an interrupt, we must be ready to handle it.
 | |
| 	 * Setting DEBUG_SHIRQ in the kernel makes it fire an interrupt
 | |
| 	 * as soon as we call pci_request_irq, so we have to setup our
 | |
| 	 * clean_rx handler before we do so.
 | |
| 	 */
 | |
| 	igbvf_configure(adapter);
 | |
| 
 | |
| 	err = igbvf_request_irq(adapter);
 | |
| 	if (err)
 | |
| 		goto err_req_irq;
 | |
| 
 | |
| 	/* From here on the code is the same as igbvf_up() */
 | |
| 	clear_bit(__IGBVF_DOWN, &adapter->state);
 | |
| 
 | |
| 	napi_enable(&adapter->rx_ring->napi);
 | |
| 
 | |
| 	/* clear any pending interrupts */
 | |
| 	er32(EICR);
 | |
| 
 | |
| 	igbvf_irq_enable(adapter);
 | |
| 
 | |
| 	/* start the watchdog */
 | |
| 	hw->mac.get_link_status = 1;
 | |
| 	mod_timer(&adapter->watchdog_timer, jiffies + 1);
 | |
| 
 | |
| 	return 0;
 | |
| 
 | |
| err_req_irq:
 | |
| 	igbvf_free_rx_resources(adapter->rx_ring);
 | |
| err_setup_rx:
 | |
| 	igbvf_free_tx_resources(adapter->tx_ring);
 | |
| err_setup_tx:
 | |
| 	igbvf_reset(adapter);
 | |
| 
 | |
| 	return err;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * igbvf_close - Disables a network interface
 | |
|  * @netdev: network interface device structure
 | |
|  *
 | |
|  * Returns 0, this is not allowed to fail
 | |
|  *
 | |
|  * The close entry point is called when an interface is de-activated
 | |
|  * by the OS.  The hardware is still under the drivers control, but
 | |
|  * needs to be disabled.  A global MAC reset is issued to stop the
 | |
|  * hardware, and all transmit and receive resources are freed.
 | |
|  **/
 | |
| static int igbvf_close(struct net_device *netdev)
 | |
| {
 | |
| 	struct igbvf_adapter *adapter = netdev_priv(netdev);
 | |
| 
 | |
| 	WARN_ON(test_bit(__IGBVF_RESETTING, &adapter->state));
 | |
| 	igbvf_down(adapter);
 | |
| 
 | |
| 	igbvf_free_irq(adapter);
 | |
| 
 | |
| 	igbvf_free_tx_resources(adapter->tx_ring);
 | |
| 	igbvf_free_rx_resources(adapter->rx_ring);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| /**
 | |
|  * igbvf_set_mac - Change the Ethernet Address of the NIC
 | |
|  * @netdev: network interface device structure
 | |
|  * @p: pointer to an address structure
 | |
|  *
 | |
|  * Returns 0 on success, negative on failure
 | |
|  **/
 | |
| static int igbvf_set_mac(struct net_device *netdev, void *p)
 | |
| {
 | |
| 	struct igbvf_adapter *adapter = netdev_priv(netdev);
 | |
| 	struct e1000_hw *hw = &adapter->hw;
 | |
| 	struct sockaddr *addr = p;
 | |
| 
 | |
| 	if (!is_valid_ether_addr(addr->sa_data))
 | |
| 		return -EADDRNOTAVAIL;
 | |
| 
 | |
| 	memcpy(hw->mac.addr, addr->sa_data, netdev->addr_len);
 | |
| 
 | |
| 	hw->mac.ops.rar_set(hw, hw->mac.addr, 0);
 | |
| 
 | |
| 	if (!ether_addr_equal(addr->sa_data, hw->mac.addr))
 | |
| 		return -EADDRNOTAVAIL;
 | |
| 
 | |
| 	memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| #define UPDATE_VF_COUNTER(reg, name)                                    \
 | |
| 	{                                                               \
 | |
| 		u32 current_counter = er32(reg);                        \
 | |
| 		if (current_counter < adapter->stats.last_##name)       \
 | |
| 			adapter->stats.name += 0x100000000LL;           \
 | |
| 		adapter->stats.last_##name = current_counter;           \
 | |
| 		adapter->stats.name &= 0xFFFFFFFF00000000LL;            \
 | |
| 		adapter->stats.name |= current_counter;                 \
 | |
| 	}
 | |
| 
 | |
| /**
 | |
|  * igbvf_update_stats - Update the board statistics counters
 | |
|  * @adapter: board private structure
 | |
| **/
 | |
| void igbvf_update_stats(struct igbvf_adapter *adapter)
 | |
| {
 | |
| 	struct e1000_hw *hw = &adapter->hw;
 | |
| 	struct pci_dev *pdev = adapter->pdev;
 | |
| 
 | |
| 	/*
 | |
| 	 * Prevent stats update while adapter is being reset, link is down
 | |
| 	 * or if the pci connection is down.
 | |
| 	 */
 | |
| 	if (adapter->link_speed == 0)
 | |
| 		return;
 | |
| 
 | |
| 	if (test_bit(__IGBVF_RESETTING, &adapter->state))
 | |
| 		return;
 | |
| 
 | |
| 	if (pci_channel_offline(pdev))
 | |
| 		return;
 | |
| 
 | |
| 	UPDATE_VF_COUNTER(VFGPRC, gprc);
 | |
| 	UPDATE_VF_COUNTER(VFGORC, gorc);
 | |
| 	UPDATE_VF_COUNTER(VFGPTC, gptc);
 | |
| 	UPDATE_VF_COUNTER(VFGOTC, gotc);
 | |
| 	UPDATE_VF_COUNTER(VFMPRC, mprc);
 | |
| 	UPDATE_VF_COUNTER(VFGOTLBC, gotlbc);
 | |
| 	UPDATE_VF_COUNTER(VFGPTLBC, gptlbc);
 | |
| 	UPDATE_VF_COUNTER(VFGORLBC, gorlbc);
 | |
| 	UPDATE_VF_COUNTER(VFGPRLBC, gprlbc);
 | |
| 
 | |
| 	/* Fill out the OS statistics structure */
 | |
| 	adapter->net_stats.multicast = adapter->stats.mprc;
 | |
| }
 | |
| 
 | |
| static void igbvf_print_link_info(struct igbvf_adapter *adapter)
 | |
| {
 | |
| 	dev_info(&adapter->pdev->dev, "Link is Up %d Mbps %s Duplex\n",
 | |
| 		 adapter->link_speed,
 | |
| 		 adapter->link_duplex == FULL_DUPLEX ? "Full" : "Half");
 | |
| }
 | |
| 
 | |
| static bool igbvf_has_link(struct igbvf_adapter *adapter)
 | |
| {
 | |
| 	struct e1000_hw *hw = &adapter->hw;
 | |
| 	s32 ret_val = E1000_SUCCESS;
 | |
| 	bool link_active;
 | |
| 
 | |
| 	/* If interface is down, stay link down */
 | |
| 	if (test_bit(__IGBVF_DOWN, &adapter->state))
 | |
| 		return false;
 | |
| 
 | |
| 	ret_val = hw->mac.ops.check_for_link(hw);
 | |
| 	link_active = !hw->mac.get_link_status;
 | |
| 
 | |
| 	/* if check for link returns error we will need to reset */
 | |
| 	if (ret_val && time_after(jiffies, adapter->last_reset + (10 * HZ)))
 | |
| 		schedule_work(&adapter->reset_task);
 | |
| 
 | |
| 	return link_active;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * igbvf_watchdog - Timer Call-back
 | |
|  * @data: pointer to adapter cast into an unsigned long
 | |
|  **/
 | |
| static void igbvf_watchdog(unsigned long data)
 | |
| {
 | |
| 	struct igbvf_adapter *adapter = (struct igbvf_adapter *) data;
 | |
| 
 | |
| 	/* Do the rest outside of interrupt context */
 | |
| 	schedule_work(&adapter->watchdog_task);
 | |
| }
 | |
| 
 | |
| static void igbvf_watchdog_task(struct work_struct *work)
 | |
| {
 | |
| 	struct igbvf_adapter *adapter = container_of(work,
 | |
| 	                                             struct igbvf_adapter,
 | |
| 	                                             watchdog_task);
 | |
| 	struct net_device *netdev = adapter->netdev;
 | |
| 	struct e1000_mac_info *mac = &adapter->hw.mac;
 | |
| 	struct igbvf_ring *tx_ring = adapter->tx_ring;
 | |
| 	struct e1000_hw *hw = &adapter->hw;
 | |
| 	u32 link;
 | |
| 	int tx_pending = 0;
 | |
| 
 | |
| 	link = igbvf_has_link(adapter);
 | |
| 
 | |
| 	if (link) {
 | |
| 		if (!netif_carrier_ok(netdev)) {
 | |
| 			mac->ops.get_link_up_info(&adapter->hw,
 | |
| 			                          &adapter->link_speed,
 | |
| 			                          &adapter->link_duplex);
 | |
| 			igbvf_print_link_info(adapter);
 | |
| 
 | |
| 			netif_carrier_on(netdev);
 | |
| 			netif_wake_queue(netdev);
 | |
| 		}
 | |
| 	} else {
 | |
| 		if (netif_carrier_ok(netdev)) {
 | |
| 			adapter->link_speed = 0;
 | |
| 			adapter->link_duplex = 0;
 | |
| 			dev_info(&adapter->pdev->dev, "Link is Down\n");
 | |
| 			netif_carrier_off(netdev);
 | |
| 			netif_stop_queue(netdev);
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	if (netif_carrier_ok(netdev)) {
 | |
| 		igbvf_update_stats(adapter);
 | |
| 	} else {
 | |
| 		tx_pending = (igbvf_desc_unused(tx_ring) + 1 <
 | |
| 		              tx_ring->count);
 | |
| 		if (tx_pending) {
 | |
| 			/*
 | |
| 			 * We've lost link, so the controller stops DMA,
 | |
| 			 * but we've got queued Tx work that's never going
 | |
| 			 * to get done, so reset controller to flush Tx.
 | |
| 			 * (Do the reset outside of interrupt context).
 | |
| 			 */
 | |
| 			adapter->tx_timeout_count++;
 | |
| 			schedule_work(&adapter->reset_task);
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	/* Cause software interrupt to ensure Rx ring is cleaned */
 | |
| 	ew32(EICS, adapter->rx_ring->eims_value);
 | |
| 
 | |
| 	/* Reset the timer */
 | |
| 	if (!test_bit(__IGBVF_DOWN, &adapter->state))
 | |
| 		mod_timer(&adapter->watchdog_timer,
 | |
| 			  round_jiffies(jiffies + (2 * HZ)));
 | |
| }
 | |
| 
 | |
| #define IGBVF_TX_FLAGS_CSUM             0x00000001
 | |
| #define IGBVF_TX_FLAGS_VLAN             0x00000002
 | |
| #define IGBVF_TX_FLAGS_TSO              0x00000004
 | |
| #define IGBVF_TX_FLAGS_IPV4             0x00000008
 | |
| #define IGBVF_TX_FLAGS_VLAN_MASK        0xffff0000
 | |
| #define IGBVF_TX_FLAGS_VLAN_SHIFT       16
 | |
| 
 | |
| static int igbvf_tso(struct igbvf_adapter *adapter,
 | |
|                      struct igbvf_ring *tx_ring,
 | |
|                      struct sk_buff *skb, u32 tx_flags, u8 *hdr_len)
 | |
| {
 | |
| 	struct e1000_adv_tx_context_desc *context_desc;
 | |
| 	struct igbvf_buffer *buffer_info;
 | |
| 	u32 info = 0, tu_cmd = 0;
 | |
| 	u32 mss_l4len_idx, l4len;
 | |
| 	unsigned int i;
 | |
| 	int err;
 | |
| 
 | |
| 	*hdr_len = 0;
 | |
| 
 | |
| 	err = skb_cow_head(skb, 0);
 | |
| 	if (err < 0) {
 | |
| 		dev_err(&adapter->pdev->dev, "igbvf_tso returning an error\n");
 | |
| 		return err;
 | |
| 	}
 | |
| 
 | |
| 	l4len = tcp_hdrlen(skb);
 | |
| 	*hdr_len += l4len;
 | |
| 
 | |
| 	if (skb->protocol == htons(ETH_P_IP)) {
 | |
| 		struct iphdr *iph = ip_hdr(skb);
 | |
| 		iph->tot_len = 0;
 | |
| 		iph->check = 0;
 | |
| 		tcp_hdr(skb)->check = ~csum_tcpudp_magic(iph->saddr,
 | |
| 		                                         iph->daddr, 0,
 | |
| 		                                         IPPROTO_TCP,
 | |
| 		                                         0);
 | |
| 	} else if (skb_is_gso_v6(skb)) {
 | |
| 		ipv6_hdr(skb)->payload_len = 0;
 | |
| 		tcp_hdr(skb)->check = ~csum_ipv6_magic(&ipv6_hdr(skb)->saddr,
 | |
| 		                                       &ipv6_hdr(skb)->daddr,
 | |
| 		                                       0, IPPROTO_TCP, 0);
 | |
| 	}
 | |
| 
 | |
| 	i = tx_ring->next_to_use;
 | |
| 
 | |
| 	buffer_info = &tx_ring->buffer_info[i];
 | |
| 	context_desc = IGBVF_TX_CTXTDESC_ADV(*tx_ring, i);
 | |
| 	/* VLAN MACLEN IPLEN */
 | |
| 	if (tx_flags & IGBVF_TX_FLAGS_VLAN)
 | |
| 		info |= (tx_flags & IGBVF_TX_FLAGS_VLAN_MASK);
 | |
| 	info |= (skb_network_offset(skb) << E1000_ADVTXD_MACLEN_SHIFT);
 | |
| 	*hdr_len += skb_network_offset(skb);
 | |
| 	info |= (skb_transport_header(skb) - skb_network_header(skb));
 | |
| 	*hdr_len += (skb_transport_header(skb) - skb_network_header(skb));
 | |
| 	context_desc->vlan_macip_lens = cpu_to_le32(info);
 | |
| 
 | |
| 	/* ADV DTYP TUCMD MKRLOC/ISCSIHEDLEN */
 | |
| 	tu_cmd |= (E1000_TXD_CMD_DEXT | E1000_ADVTXD_DTYP_CTXT);
 | |
| 
 | |
| 	if (skb->protocol == htons(ETH_P_IP))
 | |
| 		tu_cmd |= E1000_ADVTXD_TUCMD_IPV4;
 | |
| 	tu_cmd |= E1000_ADVTXD_TUCMD_L4T_TCP;
 | |
| 
 | |
| 	context_desc->type_tucmd_mlhl = cpu_to_le32(tu_cmd);
 | |
| 
 | |
| 	/* MSS L4LEN IDX */
 | |
| 	mss_l4len_idx = (skb_shinfo(skb)->gso_size << E1000_ADVTXD_MSS_SHIFT);
 | |
| 	mss_l4len_idx |= (l4len << E1000_ADVTXD_L4LEN_SHIFT);
 | |
| 
 | |
| 	context_desc->mss_l4len_idx = cpu_to_le32(mss_l4len_idx);
 | |
| 	context_desc->seqnum_seed = 0;
 | |
| 
 | |
| 	buffer_info->time_stamp = jiffies;
 | |
| 	buffer_info->dma = 0;
 | |
| 	i++;
 | |
| 	if (i == tx_ring->count)
 | |
| 		i = 0;
 | |
| 
 | |
| 	tx_ring->next_to_use = i;
 | |
| 
 | |
| 	return true;
 | |
| }
 | |
| 
 | |
| static inline bool igbvf_tx_csum(struct igbvf_adapter *adapter,
 | |
|                                  struct igbvf_ring *tx_ring,
 | |
|                                  struct sk_buff *skb, u32 tx_flags)
 | |
| {
 | |
| 	struct e1000_adv_tx_context_desc *context_desc;
 | |
| 	unsigned int i;
 | |
| 	struct igbvf_buffer *buffer_info;
 | |
| 	u32 info = 0, tu_cmd = 0;
 | |
| 
 | |
| 	if ((skb->ip_summed == CHECKSUM_PARTIAL) ||
 | |
| 	    (tx_flags & IGBVF_TX_FLAGS_VLAN)) {
 | |
| 		i = tx_ring->next_to_use;
 | |
| 		buffer_info = &tx_ring->buffer_info[i];
 | |
| 		context_desc = IGBVF_TX_CTXTDESC_ADV(*tx_ring, i);
 | |
| 
 | |
| 		if (tx_flags & IGBVF_TX_FLAGS_VLAN)
 | |
| 			info |= (tx_flags & IGBVF_TX_FLAGS_VLAN_MASK);
 | |
| 
 | |
| 		info |= (skb_network_offset(skb) << E1000_ADVTXD_MACLEN_SHIFT);
 | |
| 		if (skb->ip_summed == CHECKSUM_PARTIAL)
 | |
| 			info |= (skb_transport_header(skb) -
 | |
| 			         skb_network_header(skb));
 | |
| 
 | |
| 
 | |
| 		context_desc->vlan_macip_lens = cpu_to_le32(info);
 | |
| 
 | |
| 		tu_cmd |= (E1000_TXD_CMD_DEXT | E1000_ADVTXD_DTYP_CTXT);
 | |
| 
 | |
| 		if (skb->ip_summed == CHECKSUM_PARTIAL) {
 | |
| 			switch (skb->protocol) {
 | |
| 			case htons(ETH_P_IP):
 | |
| 				tu_cmd |= E1000_ADVTXD_TUCMD_IPV4;
 | |
| 				if (ip_hdr(skb)->protocol == IPPROTO_TCP)
 | |
| 					tu_cmd |= E1000_ADVTXD_TUCMD_L4T_TCP;
 | |
| 				break;
 | |
| 			case htons(ETH_P_IPV6):
 | |
| 				if (ipv6_hdr(skb)->nexthdr == IPPROTO_TCP)
 | |
| 					tu_cmd |= E1000_ADVTXD_TUCMD_L4T_TCP;
 | |
| 				break;
 | |
| 			default:
 | |
| 				break;
 | |
| 			}
 | |
| 		}
 | |
| 
 | |
| 		context_desc->type_tucmd_mlhl = cpu_to_le32(tu_cmd);
 | |
| 		context_desc->seqnum_seed = 0;
 | |
| 		context_desc->mss_l4len_idx = 0;
 | |
| 
 | |
| 		buffer_info->time_stamp = jiffies;
 | |
| 		buffer_info->dma = 0;
 | |
| 		i++;
 | |
| 		if (i == tx_ring->count)
 | |
| 			i = 0;
 | |
| 		tx_ring->next_to_use = i;
 | |
| 
 | |
| 		return true;
 | |
| 	}
 | |
| 
 | |
| 	return false;
 | |
| }
 | |
| 
 | |
| static int igbvf_maybe_stop_tx(struct net_device *netdev, int size)
 | |
| {
 | |
| 	struct igbvf_adapter *adapter = netdev_priv(netdev);
 | |
| 
 | |
| 	/* there is enough descriptors then we don't need to worry  */
 | |
| 	if (igbvf_desc_unused(adapter->tx_ring) >= size)
 | |
| 		return 0;
 | |
| 
 | |
| 	netif_stop_queue(netdev);
 | |
| 
 | |
| 	smp_mb();
 | |
| 
 | |
| 	/* We need to check again just in case room has been made available */
 | |
| 	if (igbvf_desc_unused(adapter->tx_ring) < size)
 | |
| 		return -EBUSY;
 | |
| 
 | |
| 	netif_wake_queue(netdev);
 | |
| 
 | |
| 	++adapter->restart_queue;
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| #define IGBVF_MAX_TXD_PWR       16
 | |
| #define IGBVF_MAX_DATA_PER_TXD  (1 << IGBVF_MAX_TXD_PWR)
 | |
| 
 | |
| static inline int igbvf_tx_map_adv(struct igbvf_adapter *adapter,
 | |
|                                    struct igbvf_ring *tx_ring,
 | |
| 				   struct sk_buff *skb)
 | |
| {
 | |
| 	struct igbvf_buffer *buffer_info;
 | |
| 	struct pci_dev *pdev = adapter->pdev;
 | |
| 	unsigned int len = skb_headlen(skb);
 | |
| 	unsigned int count = 0, i;
 | |
| 	unsigned int f;
 | |
| 
 | |
| 	i = tx_ring->next_to_use;
 | |
| 
 | |
| 	buffer_info = &tx_ring->buffer_info[i];
 | |
| 	BUG_ON(len >= IGBVF_MAX_DATA_PER_TXD);
 | |
| 	buffer_info->length = len;
 | |
| 	/* set time_stamp *before* dma to help avoid a possible race */
 | |
| 	buffer_info->time_stamp = jiffies;
 | |
| 	buffer_info->mapped_as_page = false;
 | |
| 	buffer_info->dma = dma_map_single(&pdev->dev, skb->data, len,
 | |
| 					  DMA_TO_DEVICE);
 | |
| 	if (dma_mapping_error(&pdev->dev, buffer_info->dma))
 | |
| 		goto dma_error;
 | |
| 
 | |
| 
 | |
| 	for (f = 0; f < skb_shinfo(skb)->nr_frags; f++) {
 | |
| 		const struct skb_frag_struct *frag;
 | |
| 
 | |
| 		count++;
 | |
| 		i++;
 | |
| 		if (i == tx_ring->count)
 | |
| 			i = 0;
 | |
| 
 | |
| 		frag = &skb_shinfo(skb)->frags[f];
 | |
| 		len = skb_frag_size(frag);
 | |
| 
 | |
| 		buffer_info = &tx_ring->buffer_info[i];
 | |
| 		BUG_ON(len >= IGBVF_MAX_DATA_PER_TXD);
 | |
| 		buffer_info->length = len;
 | |
| 		buffer_info->time_stamp = jiffies;
 | |
| 		buffer_info->mapped_as_page = true;
 | |
| 		buffer_info->dma = skb_frag_dma_map(&pdev->dev, frag, 0, len,
 | |
| 						DMA_TO_DEVICE);
 | |
| 		if (dma_mapping_error(&pdev->dev, buffer_info->dma))
 | |
| 			goto dma_error;
 | |
| 	}
 | |
| 
 | |
| 	tx_ring->buffer_info[i].skb = skb;
 | |
| 
 | |
| 	return ++count;
 | |
| 
 | |
| dma_error:
 | |
| 	dev_err(&pdev->dev, "TX DMA map failed\n");
 | |
| 
 | |
| 	/* clear timestamp and dma mappings for failed buffer_info mapping */
 | |
| 	buffer_info->dma = 0;
 | |
| 	buffer_info->time_stamp = 0;
 | |
| 	buffer_info->length = 0;
 | |
| 	buffer_info->mapped_as_page = false;
 | |
| 	if (count)
 | |
| 		count--;
 | |
| 
 | |
| 	/* clear timestamp and dma mappings for remaining portion of packet */
 | |
| 	while (count--) {
 | |
| 		if (i==0)
 | |
| 			i += tx_ring->count;
 | |
| 		i--;
 | |
| 		buffer_info = &tx_ring->buffer_info[i];
 | |
| 		igbvf_put_txbuf(adapter, buffer_info);
 | |
| 	}
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static inline void igbvf_tx_queue_adv(struct igbvf_adapter *adapter,
 | |
|                                       struct igbvf_ring *tx_ring,
 | |
| 				      int tx_flags, int count,
 | |
| 				      unsigned int first, u32 paylen,
 | |
|                                       u8 hdr_len)
 | |
| {
 | |
| 	union e1000_adv_tx_desc *tx_desc = NULL;
 | |
| 	struct igbvf_buffer *buffer_info;
 | |
| 	u32 olinfo_status = 0, cmd_type_len;
 | |
| 	unsigned int i;
 | |
| 
 | |
| 	cmd_type_len = (E1000_ADVTXD_DTYP_DATA | E1000_ADVTXD_DCMD_IFCS |
 | |
| 	                E1000_ADVTXD_DCMD_DEXT);
 | |
| 
 | |
| 	if (tx_flags & IGBVF_TX_FLAGS_VLAN)
 | |
| 		cmd_type_len |= E1000_ADVTXD_DCMD_VLE;
 | |
| 
 | |
| 	if (tx_flags & IGBVF_TX_FLAGS_TSO) {
 | |
| 		cmd_type_len |= E1000_ADVTXD_DCMD_TSE;
 | |
| 
 | |
| 		/* insert tcp checksum */
 | |
| 		olinfo_status |= E1000_TXD_POPTS_TXSM << 8;
 | |
| 
 | |
| 		/* insert ip checksum */
 | |
| 		if (tx_flags & IGBVF_TX_FLAGS_IPV4)
 | |
| 			olinfo_status |= E1000_TXD_POPTS_IXSM << 8;
 | |
| 
 | |
| 	} else if (tx_flags & IGBVF_TX_FLAGS_CSUM) {
 | |
| 		olinfo_status |= E1000_TXD_POPTS_TXSM << 8;
 | |
| 	}
 | |
| 
 | |
| 	olinfo_status |= ((paylen - hdr_len) << E1000_ADVTXD_PAYLEN_SHIFT);
 | |
| 
 | |
| 	i = tx_ring->next_to_use;
 | |
| 	while (count--) {
 | |
| 		buffer_info = &tx_ring->buffer_info[i];
 | |
| 		tx_desc = IGBVF_TX_DESC_ADV(*tx_ring, i);
 | |
| 		tx_desc->read.buffer_addr = cpu_to_le64(buffer_info->dma);
 | |
| 		tx_desc->read.cmd_type_len =
 | |
| 		         cpu_to_le32(cmd_type_len | buffer_info->length);
 | |
| 		tx_desc->read.olinfo_status = cpu_to_le32(olinfo_status);
 | |
| 		i++;
 | |
| 		if (i == tx_ring->count)
 | |
| 			i = 0;
 | |
| 	}
 | |
| 
 | |
| 	tx_desc->read.cmd_type_len |= cpu_to_le32(adapter->txd_cmd);
 | |
| 	/* Force memory writes to complete before letting h/w
 | |
| 	 * know there are new descriptors to fetch.  (Only
 | |
| 	 * applicable for weak-ordered memory model archs,
 | |
| 	 * such as IA-64). */
 | |
| 	wmb();
 | |
| 
 | |
| 	tx_ring->buffer_info[first].next_to_watch = tx_desc;
 | |
| 	tx_ring->next_to_use = i;
 | |
| 	writel(i, adapter->hw.hw_addr + tx_ring->tail);
 | |
| 	/* we need this if more than one processor can write to our tail
 | |
| 	 * at a time, it syncronizes IO on IA64/Altix systems */
 | |
| 	mmiowb();
 | |
| }
 | |
| 
 | |
| static netdev_tx_t igbvf_xmit_frame_ring_adv(struct sk_buff *skb,
 | |
| 					     struct net_device *netdev,
 | |
| 					     struct igbvf_ring *tx_ring)
 | |
| {
 | |
| 	struct igbvf_adapter *adapter = netdev_priv(netdev);
 | |
| 	unsigned int first, tx_flags = 0;
 | |
| 	u8 hdr_len = 0;
 | |
| 	int count = 0;
 | |
| 	int tso = 0;
 | |
| 
 | |
| 	if (test_bit(__IGBVF_DOWN, &adapter->state)) {
 | |
| 		dev_kfree_skb_any(skb);
 | |
| 		return NETDEV_TX_OK;
 | |
| 	}
 | |
| 
 | |
| 	if (skb->len <= 0) {
 | |
| 		dev_kfree_skb_any(skb);
 | |
| 		return NETDEV_TX_OK;
 | |
| 	}
 | |
| 
 | |
| 	/*
 | |
| 	 * need: count + 4 desc gap to keep tail from touching
 | |
|          *       + 2 desc gap to keep tail from touching head,
 | |
|          *       + 1 desc for skb->data,
 | |
|          *       + 1 desc for context descriptor,
 | |
| 	 * head, otherwise try next time
 | |
| 	 */
 | |
| 	if (igbvf_maybe_stop_tx(netdev, skb_shinfo(skb)->nr_frags + 4)) {
 | |
| 		/* this is a hard error */
 | |
| 		return NETDEV_TX_BUSY;
 | |
| 	}
 | |
| 
 | |
| 	if (vlan_tx_tag_present(skb)) {
 | |
| 		tx_flags |= IGBVF_TX_FLAGS_VLAN;
 | |
| 		tx_flags |= (vlan_tx_tag_get(skb) << IGBVF_TX_FLAGS_VLAN_SHIFT);
 | |
| 	}
 | |
| 
 | |
| 	if (skb->protocol == htons(ETH_P_IP))
 | |
| 		tx_flags |= IGBVF_TX_FLAGS_IPV4;
 | |
| 
 | |
| 	first = tx_ring->next_to_use;
 | |
| 
 | |
| 	tso = skb_is_gso(skb) ?
 | |
| 		igbvf_tso(adapter, tx_ring, skb, tx_flags, &hdr_len) : 0;
 | |
| 	if (unlikely(tso < 0)) {
 | |
| 		dev_kfree_skb_any(skb);
 | |
| 		return NETDEV_TX_OK;
 | |
| 	}
 | |
| 
 | |
| 	if (tso)
 | |
| 		tx_flags |= IGBVF_TX_FLAGS_TSO;
 | |
| 	else if (igbvf_tx_csum(adapter, tx_ring, skb, tx_flags) &&
 | |
| 	         (skb->ip_summed == CHECKSUM_PARTIAL))
 | |
| 		tx_flags |= IGBVF_TX_FLAGS_CSUM;
 | |
| 
 | |
| 	/*
 | |
| 	 * count reflects descriptors mapped, if 0 then mapping error
 | |
| 	 * has occurred and we need to rewind the descriptor queue
 | |
| 	 */
 | |
| 	count = igbvf_tx_map_adv(adapter, tx_ring, skb);
 | |
| 
 | |
| 	if (count) {
 | |
| 		igbvf_tx_queue_adv(adapter, tx_ring, tx_flags, count,
 | |
| 				   first, skb->len, hdr_len);
 | |
| 		/* Make sure there is space in the ring for the next send. */
 | |
| 		igbvf_maybe_stop_tx(netdev, MAX_SKB_FRAGS + 4);
 | |
| 	} else {
 | |
| 		dev_kfree_skb_any(skb);
 | |
| 		tx_ring->buffer_info[first].time_stamp = 0;
 | |
| 		tx_ring->next_to_use = first;
 | |
| 	}
 | |
| 
 | |
| 	return NETDEV_TX_OK;
 | |
| }
 | |
| 
 | |
| static netdev_tx_t igbvf_xmit_frame(struct sk_buff *skb,
 | |
| 				    struct net_device *netdev)
 | |
| {
 | |
| 	struct igbvf_adapter *adapter = netdev_priv(netdev);
 | |
| 	struct igbvf_ring *tx_ring;
 | |
| 
 | |
| 	if (test_bit(__IGBVF_DOWN, &adapter->state)) {
 | |
| 		dev_kfree_skb_any(skb);
 | |
| 		return NETDEV_TX_OK;
 | |
| 	}
 | |
| 
 | |
| 	tx_ring = &adapter->tx_ring[0];
 | |
| 
 | |
| 	return igbvf_xmit_frame_ring_adv(skb, netdev, tx_ring);
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * igbvf_tx_timeout - Respond to a Tx Hang
 | |
|  * @netdev: network interface device structure
 | |
|  **/
 | |
| static void igbvf_tx_timeout(struct net_device *netdev)
 | |
| {
 | |
| 	struct igbvf_adapter *adapter = netdev_priv(netdev);
 | |
| 
 | |
| 	/* Do the reset outside of interrupt context */
 | |
| 	adapter->tx_timeout_count++;
 | |
| 	schedule_work(&adapter->reset_task);
 | |
| }
 | |
| 
 | |
| static void igbvf_reset_task(struct work_struct *work)
 | |
| {
 | |
| 	struct igbvf_adapter *adapter;
 | |
| 	adapter = container_of(work, struct igbvf_adapter, reset_task);
 | |
| 
 | |
| 	igbvf_reinit_locked(adapter);
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * igbvf_get_stats - Get System Network Statistics
 | |
|  * @netdev: network interface device structure
 | |
|  *
 | |
|  * Returns the address of the device statistics structure.
 | |
|  * The statistics are actually updated from the timer callback.
 | |
|  **/
 | |
| static struct net_device_stats *igbvf_get_stats(struct net_device *netdev)
 | |
| {
 | |
| 	struct igbvf_adapter *adapter = netdev_priv(netdev);
 | |
| 
 | |
| 	/* only return the current stats */
 | |
| 	return &adapter->net_stats;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * igbvf_change_mtu - Change the Maximum Transfer Unit
 | |
|  * @netdev: network interface device structure
 | |
|  * @new_mtu: new value for maximum frame size
 | |
|  *
 | |
|  * Returns 0 on success, negative on failure
 | |
|  **/
 | |
| static int igbvf_change_mtu(struct net_device *netdev, int new_mtu)
 | |
| {
 | |
| 	struct igbvf_adapter *adapter = netdev_priv(netdev);
 | |
| 	int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN;
 | |
| 
 | |
| 	if (new_mtu < 68 || new_mtu > INT_MAX - ETH_HLEN - ETH_FCS_LEN ||
 | |
| 	    max_frame > MAX_JUMBO_FRAME_SIZE)
 | |
| 		return -EINVAL;
 | |
| 
 | |
| #define MAX_STD_JUMBO_FRAME_SIZE 9234
 | |
| 	if (max_frame > MAX_STD_JUMBO_FRAME_SIZE) {
 | |
| 		dev_err(&adapter->pdev->dev, "MTU > 9216 not supported.\n");
 | |
| 		return -EINVAL;
 | |
| 	}
 | |
| 
 | |
| 	while (test_and_set_bit(__IGBVF_RESETTING, &adapter->state))
 | |
| 		msleep(1);
 | |
| 	/* igbvf_down has a dependency on max_frame_size */
 | |
| 	adapter->max_frame_size = max_frame;
 | |
| 	if (netif_running(netdev))
 | |
| 		igbvf_down(adapter);
 | |
| 
 | |
| 	/*
 | |
| 	 * NOTE: netdev_alloc_skb reserves 16 bytes, and typically NET_IP_ALIGN
 | |
| 	 * means we reserve 2 more, this pushes us to allocate from the next
 | |
| 	 * larger slab size.
 | |
| 	 * i.e. RXBUFFER_2048 --> size-4096 slab
 | |
| 	 * However with the new *_jumbo_rx* routines, jumbo receives will use
 | |
| 	 * fragmented skbs
 | |
| 	 */
 | |
| 
 | |
| 	if (max_frame <= 1024)
 | |
| 		adapter->rx_buffer_len = 1024;
 | |
| 	else if (max_frame <= 2048)
 | |
| 		adapter->rx_buffer_len = 2048;
 | |
| 	else
 | |
| #if (PAGE_SIZE / 2) > 16384
 | |
| 		adapter->rx_buffer_len = 16384;
 | |
| #else
 | |
| 		adapter->rx_buffer_len = PAGE_SIZE / 2;
 | |
| #endif
 | |
| 
 | |
| 
 | |
| 	/* adjust allocation if LPE protects us, and we aren't using SBP */
 | |
| 	if ((max_frame == ETH_FRAME_LEN + ETH_FCS_LEN) ||
 | |
| 	     (max_frame == ETH_FRAME_LEN + VLAN_HLEN + ETH_FCS_LEN))
 | |
| 		adapter->rx_buffer_len = ETH_FRAME_LEN + VLAN_HLEN +
 | |
| 		                         ETH_FCS_LEN;
 | |
| 
 | |
| 	dev_info(&adapter->pdev->dev, "changing MTU from %d to %d\n",
 | |
| 	         netdev->mtu, new_mtu);
 | |
| 	netdev->mtu = new_mtu;
 | |
| 
 | |
| 	if (netif_running(netdev))
 | |
| 		igbvf_up(adapter);
 | |
| 	else
 | |
| 		igbvf_reset(adapter);
 | |
| 
 | |
| 	clear_bit(__IGBVF_RESETTING, &adapter->state);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int igbvf_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
 | |
| {
 | |
| 	switch (cmd) {
 | |
| 	default:
 | |
| 		return -EOPNOTSUPP;
 | |
| 	}
 | |
| }
 | |
| 
 | |
| static int igbvf_suspend(struct pci_dev *pdev, pm_message_t state)
 | |
| {
 | |
| 	struct net_device *netdev = pci_get_drvdata(pdev);
 | |
| 	struct igbvf_adapter *adapter = netdev_priv(netdev);
 | |
| #ifdef CONFIG_PM
 | |
| 	int retval = 0;
 | |
| #endif
 | |
| 
 | |
| 	netif_device_detach(netdev);
 | |
| 
 | |
| 	if (netif_running(netdev)) {
 | |
| 		WARN_ON(test_bit(__IGBVF_RESETTING, &adapter->state));
 | |
| 		igbvf_down(adapter);
 | |
| 		igbvf_free_irq(adapter);
 | |
| 	}
 | |
| 
 | |
| #ifdef CONFIG_PM
 | |
| 	retval = pci_save_state(pdev);
 | |
| 	if (retval)
 | |
| 		return retval;
 | |
| #endif
 | |
| 
 | |
| 	pci_disable_device(pdev);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| #ifdef CONFIG_PM
 | |
| static int igbvf_resume(struct pci_dev *pdev)
 | |
| {
 | |
| 	struct net_device *netdev = pci_get_drvdata(pdev);
 | |
| 	struct igbvf_adapter *adapter = netdev_priv(netdev);
 | |
| 	u32 err;
 | |
| 
 | |
| 	pci_restore_state(pdev);
 | |
| 	err = pci_enable_device_mem(pdev);
 | |
| 	if (err) {
 | |
| 		dev_err(&pdev->dev, "Cannot enable PCI device from suspend\n");
 | |
| 		return err;
 | |
| 	}
 | |
| 
 | |
| 	pci_set_master(pdev);
 | |
| 
 | |
| 	if (netif_running(netdev)) {
 | |
| 		err = igbvf_request_irq(adapter);
 | |
| 		if (err)
 | |
| 			return err;
 | |
| 	}
 | |
| 
 | |
| 	igbvf_reset(adapter);
 | |
| 
 | |
| 	if (netif_running(netdev))
 | |
| 		igbvf_up(adapter);
 | |
| 
 | |
| 	netif_device_attach(netdev);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| #endif
 | |
| 
 | |
| static void igbvf_shutdown(struct pci_dev *pdev)
 | |
| {
 | |
| 	igbvf_suspend(pdev, PMSG_SUSPEND);
 | |
| }
 | |
| 
 | |
| #ifdef CONFIG_NET_POLL_CONTROLLER
 | |
| /*
 | |
|  * Polling 'interrupt' - used by things like netconsole to send skbs
 | |
|  * without having to re-enable interrupts. It's not called while
 | |
|  * the interrupt routine is executing.
 | |
|  */
 | |
| static void igbvf_netpoll(struct net_device *netdev)
 | |
| {
 | |
| 	struct igbvf_adapter *adapter = netdev_priv(netdev);
 | |
| 
 | |
| 	disable_irq(adapter->pdev->irq);
 | |
| 
 | |
| 	igbvf_clean_tx_irq(adapter->tx_ring);
 | |
| 
 | |
| 	enable_irq(adapter->pdev->irq);
 | |
| }
 | |
| #endif
 | |
| 
 | |
| /**
 | |
|  * igbvf_io_error_detected - called when PCI error is detected
 | |
|  * @pdev: Pointer to PCI device
 | |
|  * @state: The current pci connection state
 | |
|  *
 | |
|  * This function is called after a PCI bus error affecting
 | |
|  * this device has been detected.
 | |
|  */
 | |
| static pci_ers_result_t igbvf_io_error_detected(struct pci_dev *pdev,
 | |
|                                                 pci_channel_state_t state)
 | |
| {
 | |
| 	struct net_device *netdev = pci_get_drvdata(pdev);
 | |
| 	struct igbvf_adapter *adapter = netdev_priv(netdev);
 | |
| 
 | |
| 	netif_device_detach(netdev);
 | |
| 
 | |
| 	if (state == pci_channel_io_perm_failure)
 | |
| 		return PCI_ERS_RESULT_DISCONNECT;
 | |
| 
 | |
| 	if (netif_running(netdev))
 | |
| 		igbvf_down(adapter);
 | |
| 	pci_disable_device(pdev);
 | |
| 
 | |
| 	/* Request a slot slot reset. */
 | |
| 	return PCI_ERS_RESULT_NEED_RESET;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * igbvf_io_slot_reset - called after the pci bus has been reset.
 | |
|  * @pdev: Pointer to PCI device
 | |
|  *
 | |
|  * Restart the card from scratch, as if from a cold-boot. Implementation
 | |
|  * resembles the first-half of the igbvf_resume routine.
 | |
|  */
 | |
| static pci_ers_result_t igbvf_io_slot_reset(struct pci_dev *pdev)
 | |
| {
 | |
| 	struct net_device *netdev = pci_get_drvdata(pdev);
 | |
| 	struct igbvf_adapter *adapter = netdev_priv(netdev);
 | |
| 
 | |
| 	if (pci_enable_device_mem(pdev)) {
 | |
| 		dev_err(&pdev->dev,
 | |
| 			"Cannot re-enable PCI device after reset.\n");
 | |
| 		return PCI_ERS_RESULT_DISCONNECT;
 | |
| 	}
 | |
| 	pci_set_master(pdev);
 | |
| 
 | |
| 	igbvf_reset(adapter);
 | |
| 
 | |
| 	return PCI_ERS_RESULT_RECOVERED;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * igbvf_io_resume - called when traffic can start flowing again.
 | |
|  * @pdev: Pointer to PCI device
 | |
|  *
 | |
|  * This callback is called when the error recovery driver tells us that
 | |
|  * its OK to resume normal operation. Implementation resembles the
 | |
|  * second-half of the igbvf_resume routine.
 | |
|  */
 | |
| static void igbvf_io_resume(struct pci_dev *pdev)
 | |
| {
 | |
| 	struct net_device *netdev = pci_get_drvdata(pdev);
 | |
| 	struct igbvf_adapter *adapter = netdev_priv(netdev);
 | |
| 
 | |
| 	if (netif_running(netdev)) {
 | |
| 		if (igbvf_up(adapter)) {
 | |
| 			dev_err(&pdev->dev,
 | |
| 				"can't bring device back up after reset\n");
 | |
| 			return;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	netif_device_attach(netdev);
 | |
| }
 | |
| 
 | |
| static void igbvf_print_device_info(struct igbvf_adapter *adapter)
 | |
| {
 | |
| 	struct e1000_hw *hw = &adapter->hw;
 | |
| 	struct net_device *netdev = adapter->netdev;
 | |
| 	struct pci_dev *pdev = adapter->pdev;
 | |
| 
 | |
| 	if (hw->mac.type == e1000_vfadapt_i350)
 | |
| 		dev_info(&pdev->dev, "Intel(R) I350 Virtual Function\n");
 | |
| 	else
 | |
| 		dev_info(&pdev->dev, "Intel(R) 82576 Virtual Function\n");
 | |
| 	dev_info(&pdev->dev, "Address: %pM\n", netdev->dev_addr);
 | |
| }
 | |
| 
 | |
| static int igbvf_set_features(struct net_device *netdev,
 | |
| 	netdev_features_t features)
 | |
| {
 | |
| 	struct igbvf_adapter *adapter = netdev_priv(netdev);
 | |
| 
 | |
| 	if (features & NETIF_F_RXCSUM)
 | |
| 		adapter->flags &= ~IGBVF_FLAG_RX_CSUM_DISABLED;
 | |
| 	else
 | |
| 		adapter->flags |= IGBVF_FLAG_RX_CSUM_DISABLED;
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static const struct net_device_ops igbvf_netdev_ops = {
 | |
| 	.ndo_open                       = igbvf_open,
 | |
| 	.ndo_stop                       = igbvf_close,
 | |
| 	.ndo_start_xmit                 = igbvf_xmit_frame,
 | |
| 	.ndo_get_stats                  = igbvf_get_stats,
 | |
| 	.ndo_set_rx_mode		= igbvf_set_multi,
 | |
| 	.ndo_set_mac_address            = igbvf_set_mac,
 | |
| 	.ndo_change_mtu                 = igbvf_change_mtu,
 | |
| 	.ndo_do_ioctl                   = igbvf_ioctl,
 | |
| 	.ndo_tx_timeout                 = igbvf_tx_timeout,
 | |
| 	.ndo_vlan_rx_add_vid            = igbvf_vlan_rx_add_vid,
 | |
| 	.ndo_vlan_rx_kill_vid           = igbvf_vlan_rx_kill_vid,
 | |
| #ifdef CONFIG_NET_POLL_CONTROLLER
 | |
| 	.ndo_poll_controller            = igbvf_netpoll,
 | |
| #endif
 | |
| 	.ndo_set_features               = igbvf_set_features,
 | |
| };
 | |
| 
 | |
| /**
 | |
|  * igbvf_probe - Device Initialization Routine
 | |
|  * @pdev: PCI device information struct
 | |
|  * @ent: entry in igbvf_pci_tbl
 | |
|  *
 | |
|  * Returns 0 on success, negative on failure
 | |
|  *
 | |
|  * igbvf_probe initializes an adapter identified by a pci_dev structure.
 | |
|  * The OS initialization, configuring of the adapter private structure,
 | |
|  * and a hardware reset occur.
 | |
|  **/
 | |
| static int igbvf_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 | |
| {
 | |
| 	struct net_device *netdev;
 | |
| 	struct igbvf_adapter *adapter;
 | |
| 	struct e1000_hw *hw;
 | |
| 	const struct igbvf_info *ei = igbvf_info_tbl[ent->driver_data];
 | |
| 
 | |
| 	static int cards_found;
 | |
| 	int err, pci_using_dac;
 | |
| 
 | |
| 	err = pci_enable_device_mem(pdev);
 | |
| 	if (err)
 | |
| 		return err;
 | |
| 
 | |
| 	pci_using_dac = 0;
 | |
| 	err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64));
 | |
| 	if (!err) {
 | |
| 		pci_using_dac = 1;
 | |
| 	} else {
 | |
| 		err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
 | |
| 		if (err) {
 | |
| 			dev_err(&pdev->dev, "No usable DMA "
 | |
| 			        "configuration, aborting\n");
 | |
| 			goto err_dma;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	err = pci_request_regions(pdev, igbvf_driver_name);
 | |
| 	if (err)
 | |
| 		goto err_pci_reg;
 | |
| 
 | |
| 	pci_set_master(pdev);
 | |
| 
 | |
| 	err = -ENOMEM;
 | |
| 	netdev = alloc_etherdev(sizeof(struct igbvf_adapter));
 | |
| 	if (!netdev)
 | |
| 		goto err_alloc_etherdev;
 | |
| 
 | |
| 	SET_NETDEV_DEV(netdev, &pdev->dev);
 | |
| 
 | |
| 	pci_set_drvdata(pdev, netdev);
 | |
| 	adapter = netdev_priv(netdev);
 | |
| 	hw = &adapter->hw;
 | |
| 	adapter->netdev = netdev;
 | |
| 	adapter->pdev = pdev;
 | |
| 	adapter->ei = ei;
 | |
| 	adapter->pba = ei->pba;
 | |
| 	adapter->flags = ei->flags;
 | |
| 	adapter->hw.back = adapter;
 | |
| 	adapter->hw.mac.type = ei->mac;
 | |
| 	adapter->msg_enable = netif_msg_init(debug, DEFAULT_MSG_ENABLE);
 | |
| 
 | |
| 	/* PCI config space info */
 | |
| 
 | |
| 	hw->vendor_id = pdev->vendor;
 | |
| 	hw->device_id = pdev->device;
 | |
| 	hw->subsystem_vendor_id = pdev->subsystem_vendor;
 | |
| 	hw->subsystem_device_id = pdev->subsystem_device;
 | |
| 	hw->revision_id = pdev->revision;
 | |
| 
 | |
| 	err = -EIO;
 | |
| 	adapter->hw.hw_addr = ioremap(pci_resource_start(pdev, 0),
 | |
| 	                              pci_resource_len(pdev, 0));
 | |
| 
 | |
| 	if (!adapter->hw.hw_addr)
 | |
| 		goto err_ioremap;
 | |
| 
 | |
| 	if (ei->get_variants) {
 | |
| 		err = ei->get_variants(adapter);
 | |
| 		if (err)
 | |
| 			goto err_get_variants;
 | |
| 	}
 | |
| 
 | |
| 	/* setup adapter struct */
 | |
| 	err = igbvf_sw_init(adapter);
 | |
| 	if (err)
 | |
| 		goto err_sw_init;
 | |
| 
 | |
| 	/* construct the net_device struct */
 | |
| 	netdev->netdev_ops = &igbvf_netdev_ops;
 | |
| 
 | |
| 	igbvf_set_ethtool_ops(netdev);
 | |
| 	netdev->watchdog_timeo = 5 * HZ;
 | |
| 	strncpy(netdev->name, pci_name(pdev), sizeof(netdev->name) - 1);
 | |
| 
 | |
| 	adapter->bd_number = cards_found++;
 | |
| 
 | |
| 	netdev->hw_features = NETIF_F_SG |
 | |
| 	                   NETIF_F_IP_CSUM |
 | |
| 			   NETIF_F_IPV6_CSUM |
 | |
| 			   NETIF_F_TSO |
 | |
| 			   NETIF_F_TSO6 |
 | |
| 			   NETIF_F_RXCSUM;
 | |
| 
 | |
| 	netdev->features = netdev->hw_features |
 | |
| 	                   NETIF_F_HW_VLAN_CTAG_TX |
 | |
| 	                   NETIF_F_HW_VLAN_CTAG_RX |
 | |
| 	                   NETIF_F_HW_VLAN_CTAG_FILTER;
 | |
| 
 | |
| 	if (pci_using_dac)
 | |
| 		netdev->features |= NETIF_F_HIGHDMA;
 | |
| 
 | |
| 	netdev->vlan_features |= NETIF_F_TSO;
 | |
| 	netdev->vlan_features |= NETIF_F_TSO6;
 | |
| 	netdev->vlan_features |= NETIF_F_IP_CSUM;
 | |
| 	netdev->vlan_features |= NETIF_F_IPV6_CSUM;
 | |
| 	netdev->vlan_features |= NETIF_F_SG;
 | |
| 
 | |
| 	/*reset the controller to put the device in a known good state */
 | |
| 	err = hw->mac.ops.reset_hw(hw);
 | |
| 	if (err) {
 | |
| 		dev_info(&pdev->dev,
 | |
| 			 "PF still in reset state. Is the PF interface up?\n");
 | |
| 	} else {
 | |
| 		err = hw->mac.ops.read_mac_addr(hw);
 | |
| 		if (err)
 | |
| 			dev_info(&pdev->dev, "Error reading MAC address.\n");
 | |
| 		else if (is_zero_ether_addr(adapter->hw.mac.addr))
 | |
| 			dev_info(&pdev->dev, "MAC address not assigned by administrator.\n");
 | |
| 		memcpy(netdev->dev_addr, adapter->hw.mac.addr,
 | |
| 		       netdev->addr_len);
 | |
| 	}
 | |
| 
 | |
| 	if (!is_valid_ether_addr(netdev->dev_addr)) {
 | |
| 		dev_info(&pdev->dev, "Assigning random MAC address.\n");
 | |
| 		eth_hw_addr_random(netdev);
 | |
| 		memcpy(adapter->hw.mac.addr, netdev->dev_addr,
 | |
| 			netdev->addr_len);
 | |
| 	}
 | |
| 
 | |
| 	setup_timer(&adapter->watchdog_timer, &igbvf_watchdog,
 | |
| 	            (unsigned long) adapter);
 | |
| 
 | |
| 	INIT_WORK(&adapter->reset_task, igbvf_reset_task);
 | |
| 	INIT_WORK(&adapter->watchdog_task, igbvf_watchdog_task);
 | |
| 
 | |
| 	/* ring size defaults */
 | |
| 	adapter->rx_ring->count = 1024;
 | |
| 	adapter->tx_ring->count = 1024;
 | |
| 
 | |
| 	/* reset the hardware with the new settings */
 | |
| 	igbvf_reset(adapter);
 | |
| 
 | |
| 	/* set hardware-specific flags */
 | |
| 	if (adapter->hw.mac.type == e1000_vfadapt_i350)
 | |
| 		adapter->flags |= IGBVF_FLAG_RX_LB_VLAN_BSWAP;
 | |
| 
 | |
| 	strcpy(netdev->name, "eth%d");
 | |
| 	err = register_netdev(netdev);
 | |
| 	if (err)
 | |
| 		goto err_hw_init;
 | |
| 
 | |
| 	/* tell the stack to leave us alone until igbvf_open() is called */
 | |
| 	netif_carrier_off(netdev);
 | |
| 	netif_stop_queue(netdev);
 | |
| 
 | |
| 	igbvf_print_device_info(adapter);
 | |
| 
 | |
| 	igbvf_initialize_last_counter_stats(adapter);
 | |
| 
 | |
| 	return 0;
 | |
| 
 | |
| err_hw_init:
 | |
| 	kfree(adapter->tx_ring);
 | |
| 	kfree(adapter->rx_ring);
 | |
| err_sw_init:
 | |
| 	igbvf_reset_interrupt_capability(adapter);
 | |
| err_get_variants:
 | |
| 	iounmap(adapter->hw.hw_addr);
 | |
| err_ioremap:
 | |
| 	free_netdev(netdev);
 | |
| err_alloc_etherdev:
 | |
| 	pci_release_regions(pdev);
 | |
| err_pci_reg:
 | |
| err_dma:
 | |
| 	pci_disable_device(pdev);
 | |
| 	return err;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * igbvf_remove - Device Removal Routine
 | |
|  * @pdev: PCI device information struct
 | |
|  *
 | |
|  * igbvf_remove is called by the PCI subsystem to alert the driver
 | |
|  * that it should release a PCI device.  The could be caused by a
 | |
|  * Hot-Plug event, or because the driver is going to be removed from
 | |
|  * memory.
 | |
|  **/
 | |
| static void igbvf_remove(struct pci_dev *pdev)
 | |
| {
 | |
| 	struct net_device *netdev = pci_get_drvdata(pdev);
 | |
| 	struct igbvf_adapter *adapter = netdev_priv(netdev);
 | |
| 	struct e1000_hw *hw = &adapter->hw;
 | |
| 
 | |
| 	/*
 | |
| 	 * The watchdog timer may be rescheduled, so explicitly
 | |
| 	 * disable it from being rescheduled.
 | |
| 	 */
 | |
| 	set_bit(__IGBVF_DOWN, &adapter->state);
 | |
| 	del_timer_sync(&adapter->watchdog_timer);
 | |
| 
 | |
| 	cancel_work_sync(&adapter->reset_task);
 | |
| 	cancel_work_sync(&adapter->watchdog_task);
 | |
| 
 | |
| 	unregister_netdev(netdev);
 | |
| 
 | |
| 	igbvf_reset_interrupt_capability(adapter);
 | |
| 
 | |
| 	/*
 | |
| 	 * it is important to delete the napi struct prior to freeing the
 | |
| 	 * rx ring so that you do not end up with null pointer refs
 | |
| 	 */
 | |
| 	netif_napi_del(&adapter->rx_ring->napi);
 | |
| 	kfree(adapter->tx_ring);
 | |
| 	kfree(adapter->rx_ring);
 | |
| 
 | |
| 	iounmap(hw->hw_addr);
 | |
| 	if (hw->flash_address)
 | |
| 		iounmap(hw->flash_address);
 | |
| 	pci_release_regions(pdev);
 | |
| 
 | |
| 	free_netdev(netdev);
 | |
| 
 | |
| 	pci_disable_device(pdev);
 | |
| }
 | |
| 
 | |
| /* PCI Error Recovery (ERS) */
 | |
| static const struct pci_error_handlers igbvf_err_handler = {
 | |
| 	.error_detected = igbvf_io_error_detected,
 | |
| 	.slot_reset = igbvf_io_slot_reset,
 | |
| 	.resume = igbvf_io_resume,
 | |
| };
 | |
| 
 | |
| static const struct pci_device_id igbvf_pci_tbl[] = {
 | |
| 	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_VF), board_vf },
 | |
| 	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_I350_VF), board_i350_vf },
 | |
| 	{ } /* terminate list */
 | |
| };
 | |
| MODULE_DEVICE_TABLE(pci, igbvf_pci_tbl);
 | |
| 
 | |
| /* PCI Device API Driver */
 | |
| static struct pci_driver igbvf_driver = {
 | |
| 	.name     = igbvf_driver_name,
 | |
| 	.id_table = igbvf_pci_tbl,
 | |
| 	.probe    = igbvf_probe,
 | |
| 	.remove   = igbvf_remove,
 | |
| #ifdef CONFIG_PM
 | |
| 	/* Power Management Hooks */
 | |
| 	.suspend  = igbvf_suspend,
 | |
| 	.resume   = igbvf_resume,
 | |
| #endif
 | |
| 	.shutdown = igbvf_shutdown,
 | |
| 	.err_handler = &igbvf_err_handler
 | |
| };
 | |
| 
 | |
| /**
 | |
|  * igbvf_init_module - Driver Registration Routine
 | |
|  *
 | |
|  * igbvf_init_module is the first routine called when the driver is
 | |
|  * loaded. All it does is register with the PCI subsystem.
 | |
|  **/
 | |
| static int __init igbvf_init_module(void)
 | |
| {
 | |
| 	int ret;
 | |
| 	pr_info("%s - version %s\n", igbvf_driver_string, igbvf_driver_version);
 | |
| 	pr_info("%s\n", igbvf_copyright);
 | |
| 
 | |
| 	ret = pci_register_driver(&igbvf_driver);
 | |
| 
 | |
| 	return ret;
 | |
| }
 | |
| module_init(igbvf_init_module);
 | |
| 
 | |
| /**
 | |
|  * igbvf_exit_module - Driver Exit Cleanup Routine
 | |
|  *
 | |
|  * igbvf_exit_module is called just before the driver is removed
 | |
|  * from memory.
 | |
|  **/
 | |
| static void __exit igbvf_exit_module(void)
 | |
| {
 | |
| 	pci_unregister_driver(&igbvf_driver);
 | |
| }
 | |
| module_exit(igbvf_exit_module);
 | |
| 
 | |
| 
 | |
| MODULE_AUTHOR("Intel Corporation, <e1000-devel@lists.sourceforge.net>");
 | |
| MODULE_DESCRIPTION("Intel(R) Gigabit Virtual Function Network Driver");
 | |
| MODULE_LICENSE("GPL");
 | |
| MODULE_VERSION(DRV_VERSION);
 | |
| 
 | |
| /* netdev.c */
 |