 765a3f4fed
			
		
	
	
	765a3f4fed
	
	
	
		
			
			The following pattern is currently not well supported by RCU: 1. Make data element inaccessible to RCU readers. 2. Do work that probably lasts for more than one grace period. 3. Do something to make sure RCU readers in flight before #1 above have completed. Here are some things that could currently be done: a. Do a synchronize_rcu() unconditionally at either #1 or #3 above. This works, but imposes needless work and latency. b. Post an RCU callback at #1 above that does a wakeup, then wait for the wakeup at #3. This works well, but likely results in an extra unneeded grace period. Open-coding this is also a bit more semi-tricky code than would be good. This commit therefore adds get_state_synchronize_rcu() and cond_synchronize_rcu() APIs. Call get_state_synchronize_rcu() at #1 above and pass its return value to cond_synchronize_rcu() at #3 above. This results in a call to synchronize_rcu() if no grace period has elapsed between #1 and #3, but requires only a load, comparison, and memory barrier if a full grace period did elapse. Requested-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Peter Zijlstra <peterz@infradead.org>
		
			
				
	
	
		
			3535 lines
		
	
	
	
		
			110 KiB
			
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			3535 lines
		
	
	
	
		
			110 KiB
			
		
	
	
	
		
			C
		
	
	
	
	
	
| /*
 | |
|  * Read-Copy Update mechanism for mutual exclusion
 | |
|  *
 | |
|  * This program is free software; you can redistribute it and/or modify
 | |
|  * it under the terms of the GNU General Public License as published by
 | |
|  * the Free Software Foundation; either version 2 of the License, or
 | |
|  * (at your option) any later version.
 | |
|  *
 | |
|  * This program is distributed in the hope that it will be useful,
 | |
|  * but WITHOUT ANY WARRANTY; without even the implied warranty of
 | |
|  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 | |
|  * GNU General Public License for more details.
 | |
|  *
 | |
|  * You should have received a copy of the GNU General Public License
 | |
|  * along with this program; if not, you can access it online at
 | |
|  * http://www.gnu.org/licenses/gpl-2.0.html.
 | |
|  *
 | |
|  * Copyright IBM Corporation, 2008
 | |
|  *
 | |
|  * Authors: Dipankar Sarma <dipankar@in.ibm.com>
 | |
|  *	    Manfred Spraul <manfred@colorfullife.com>
 | |
|  *	    Paul E. McKenney <paulmck@linux.vnet.ibm.com> Hierarchical version
 | |
|  *
 | |
|  * Based on the original work by Paul McKenney <paulmck@us.ibm.com>
 | |
|  * and inputs from Rusty Russell, Andrea Arcangeli and Andi Kleen.
 | |
|  *
 | |
|  * For detailed explanation of Read-Copy Update mechanism see -
 | |
|  *	Documentation/RCU
 | |
|  */
 | |
| #include <linux/types.h>
 | |
| #include <linux/kernel.h>
 | |
| #include <linux/init.h>
 | |
| #include <linux/spinlock.h>
 | |
| #include <linux/smp.h>
 | |
| #include <linux/rcupdate.h>
 | |
| #include <linux/interrupt.h>
 | |
| #include <linux/sched.h>
 | |
| #include <linux/nmi.h>
 | |
| #include <linux/atomic.h>
 | |
| #include <linux/bitops.h>
 | |
| #include <linux/export.h>
 | |
| #include <linux/completion.h>
 | |
| #include <linux/moduleparam.h>
 | |
| #include <linux/module.h>
 | |
| #include <linux/percpu.h>
 | |
| #include <linux/notifier.h>
 | |
| #include <linux/cpu.h>
 | |
| #include <linux/mutex.h>
 | |
| #include <linux/time.h>
 | |
| #include <linux/kernel_stat.h>
 | |
| #include <linux/wait.h>
 | |
| #include <linux/kthread.h>
 | |
| #include <linux/prefetch.h>
 | |
| #include <linux/delay.h>
 | |
| #include <linux/stop_machine.h>
 | |
| #include <linux/random.h>
 | |
| #include <linux/ftrace_event.h>
 | |
| #include <linux/suspend.h>
 | |
| 
 | |
| #include "tree.h"
 | |
| #include "rcu.h"
 | |
| 
 | |
| MODULE_ALIAS("rcutree");
 | |
| #ifdef MODULE_PARAM_PREFIX
 | |
| #undef MODULE_PARAM_PREFIX
 | |
| #endif
 | |
| #define MODULE_PARAM_PREFIX "rcutree."
 | |
| 
 | |
| /* Data structures. */
 | |
| 
 | |
| static struct lock_class_key rcu_node_class[RCU_NUM_LVLS];
 | |
| static struct lock_class_key rcu_fqs_class[RCU_NUM_LVLS];
 | |
| 
 | |
| /*
 | |
|  * In order to export the rcu_state name to the tracing tools, it
 | |
|  * needs to be added in the __tracepoint_string section.
 | |
|  * This requires defining a separate variable tp_<sname>_varname
 | |
|  * that points to the string being used, and this will allow
 | |
|  * the tracing userspace tools to be able to decipher the string
 | |
|  * address to the matching string.
 | |
|  */
 | |
| #define RCU_STATE_INITIALIZER(sname, sabbr, cr) \
 | |
| static char sname##_varname[] = #sname; \
 | |
| static const char *tp_##sname##_varname __used __tracepoint_string = sname##_varname; \
 | |
| struct rcu_state sname##_state = { \
 | |
| 	.level = { &sname##_state.node[0] }, \
 | |
| 	.call = cr, \
 | |
| 	.fqs_state = RCU_GP_IDLE, \
 | |
| 	.gpnum = 0UL - 300UL, \
 | |
| 	.completed = 0UL - 300UL, \
 | |
| 	.orphan_lock = __RAW_SPIN_LOCK_UNLOCKED(&sname##_state.orphan_lock), \
 | |
| 	.orphan_nxttail = &sname##_state.orphan_nxtlist, \
 | |
| 	.orphan_donetail = &sname##_state.orphan_donelist, \
 | |
| 	.barrier_mutex = __MUTEX_INITIALIZER(sname##_state.barrier_mutex), \
 | |
| 	.onoff_mutex = __MUTEX_INITIALIZER(sname##_state.onoff_mutex), \
 | |
| 	.name = sname##_varname, \
 | |
| 	.abbr = sabbr, \
 | |
| }; \
 | |
| DEFINE_PER_CPU(struct rcu_data, sname##_data)
 | |
| 
 | |
| RCU_STATE_INITIALIZER(rcu_sched, 's', call_rcu_sched);
 | |
| RCU_STATE_INITIALIZER(rcu_bh, 'b', call_rcu_bh);
 | |
| 
 | |
| static struct rcu_state *rcu_state;
 | |
| LIST_HEAD(rcu_struct_flavors);
 | |
| 
 | |
| /* Increase (but not decrease) the CONFIG_RCU_FANOUT_LEAF at boot time. */
 | |
| static int rcu_fanout_leaf = CONFIG_RCU_FANOUT_LEAF;
 | |
| module_param(rcu_fanout_leaf, int, 0444);
 | |
| int rcu_num_lvls __read_mostly = RCU_NUM_LVLS;
 | |
| static int num_rcu_lvl[] = {  /* Number of rcu_nodes at specified level. */
 | |
| 	NUM_RCU_LVL_0,
 | |
| 	NUM_RCU_LVL_1,
 | |
| 	NUM_RCU_LVL_2,
 | |
| 	NUM_RCU_LVL_3,
 | |
| 	NUM_RCU_LVL_4,
 | |
| };
 | |
| int rcu_num_nodes __read_mostly = NUM_RCU_NODES; /* Total # rcu_nodes in use. */
 | |
| 
 | |
| /*
 | |
|  * The rcu_scheduler_active variable transitions from zero to one just
 | |
|  * before the first task is spawned.  So when this variable is zero, RCU
 | |
|  * can assume that there is but one task, allowing RCU to (for example)
 | |
|  * optimize synchronize_sched() to a simple barrier().  When this variable
 | |
|  * is one, RCU must actually do all the hard work required to detect real
 | |
|  * grace periods.  This variable is also used to suppress boot-time false
 | |
|  * positives from lockdep-RCU error checking.
 | |
|  */
 | |
| int rcu_scheduler_active __read_mostly;
 | |
| EXPORT_SYMBOL_GPL(rcu_scheduler_active);
 | |
| 
 | |
| /*
 | |
|  * The rcu_scheduler_fully_active variable transitions from zero to one
 | |
|  * during the early_initcall() processing, which is after the scheduler
 | |
|  * is capable of creating new tasks.  So RCU processing (for example,
 | |
|  * creating tasks for RCU priority boosting) must be delayed until after
 | |
|  * rcu_scheduler_fully_active transitions from zero to one.  We also
 | |
|  * currently delay invocation of any RCU callbacks until after this point.
 | |
|  *
 | |
|  * It might later prove better for people registering RCU callbacks during
 | |
|  * early boot to take responsibility for these callbacks, but one step at
 | |
|  * a time.
 | |
|  */
 | |
| static int rcu_scheduler_fully_active __read_mostly;
 | |
| 
 | |
| #ifdef CONFIG_RCU_BOOST
 | |
| 
 | |
| /*
 | |
|  * Control variables for per-CPU and per-rcu_node kthreads.  These
 | |
|  * handle all flavors of RCU.
 | |
|  */
 | |
| static DEFINE_PER_CPU(struct task_struct *, rcu_cpu_kthread_task);
 | |
| DEFINE_PER_CPU(unsigned int, rcu_cpu_kthread_status);
 | |
| DEFINE_PER_CPU(unsigned int, rcu_cpu_kthread_loops);
 | |
| DEFINE_PER_CPU(char, rcu_cpu_has_work);
 | |
| 
 | |
| #endif /* #ifdef CONFIG_RCU_BOOST */
 | |
| 
 | |
| static void rcu_boost_kthread_setaffinity(struct rcu_node *rnp, int outgoingcpu);
 | |
| static void invoke_rcu_core(void);
 | |
| static void invoke_rcu_callbacks(struct rcu_state *rsp, struct rcu_data *rdp);
 | |
| 
 | |
| /*
 | |
|  * Track the rcutorture test sequence number and the update version
 | |
|  * number within a given test.  The rcutorture_testseq is incremented
 | |
|  * on every rcutorture module load and unload, so has an odd value
 | |
|  * when a test is running.  The rcutorture_vernum is set to zero
 | |
|  * when rcutorture starts and is incremented on each rcutorture update.
 | |
|  * These variables enable correlating rcutorture output with the
 | |
|  * RCU tracing information.
 | |
|  */
 | |
| unsigned long rcutorture_testseq;
 | |
| unsigned long rcutorture_vernum;
 | |
| 
 | |
| /*
 | |
|  * Return true if an RCU grace period is in progress.  The ACCESS_ONCE()s
 | |
|  * permit this function to be invoked without holding the root rcu_node
 | |
|  * structure's ->lock, but of course results can be subject to change.
 | |
|  */
 | |
| static int rcu_gp_in_progress(struct rcu_state *rsp)
 | |
| {
 | |
| 	return ACCESS_ONCE(rsp->completed) != ACCESS_ONCE(rsp->gpnum);
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * Note a quiescent state.  Because we do not need to know
 | |
|  * how many quiescent states passed, just if there was at least
 | |
|  * one since the start of the grace period, this just sets a flag.
 | |
|  * The caller must have disabled preemption.
 | |
|  */
 | |
| void rcu_sched_qs(int cpu)
 | |
| {
 | |
| 	struct rcu_data *rdp = &per_cpu(rcu_sched_data, cpu);
 | |
| 
 | |
| 	if (rdp->passed_quiesce == 0)
 | |
| 		trace_rcu_grace_period(TPS("rcu_sched"), rdp->gpnum, TPS("cpuqs"));
 | |
| 	rdp->passed_quiesce = 1;
 | |
| }
 | |
| 
 | |
| void rcu_bh_qs(int cpu)
 | |
| {
 | |
| 	struct rcu_data *rdp = &per_cpu(rcu_bh_data, cpu);
 | |
| 
 | |
| 	if (rdp->passed_quiesce == 0)
 | |
| 		trace_rcu_grace_period(TPS("rcu_bh"), rdp->gpnum, TPS("cpuqs"));
 | |
| 	rdp->passed_quiesce = 1;
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * Note a context switch.  This is a quiescent state for RCU-sched,
 | |
|  * and requires special handling for preemptible RCU.
 | |
|  * The caller must have disabled preemption.
 | |
|  */
 | |
| void rcu_note_context_switch(int cpu)
 | |
| {
 | |
| 	trace_rcu_utilization(TPS("Start context switch"));
 | |
| 	rcu_sched_qs(cpu);
 | |
| 	rcu_preempt_note_context_switch(cpu);
 | |
| 	trace_rcu_utilization(TPS("End context switch"));
 | |
| }
 | |
| EXPORT_SYMBOL_GPL(rcu_note_context_switch);
 | |
| 
 | |
| static DEFINE_PER_CPU(struct rcu_dynticks, rcu_dynticks) = {
 | |
| 	.dynticks_nesting = DYNTICK_TASK_EXIT_IDLE,
 | |
| 	.dynticks = ATOMIC_INIT(1),
 | |
| #ifdef CONFIG_NO_HZ_FULL_SYSIDLE
 | |
| 	.dynticks_idle_nesting = DYNTICK_TASK_NEST_VALUE,
 | |
| 	.dynticks_idle = ATOMIC_INIT(1),
 | |
| #endif /* #ifdef CONFIG_NO_HZ_FULL_SYSIDLE */
 | |
| };
 | |
| 
 | |
| static long blimit = 10;	/* Maximum callbacks per rcu_do_batch. */
 | |
| static long qhimark = 10000;	/* If this many pending, ignore blimit. */
 | |
| static long qlowmark = 100;	/* Once only this many pending, use blimit. */
 | |
| 
 | |
| module_param(blimit, long, 0444);
 | |
| module_param(qhimark, long, 0444);
 | |
| module_param(qlowmark, long, 0444);
 | |
| 
 | |
| static ulong jiffies_till_first_fqs = ULONG_MAX;
 | |
| static ulong jiffies_till_next_fqs = ULONG_MAX;
 | |
| 
 | |
| module_param(jiffies_till_first_fqs, ulong, 0644);
 | |
| module_param(jiffies_till_next_fqs, ulong, 0644);
 | |
| 
 | |
| static void rcu_start_gp_advanced(struct rcu_state *rsp, struct rcu_node *rnp,
 | |
| 				  struct rcu_data *rdp);
 | |
| static void force_qs_rnp(struct rcu_state *rsp,
 | |
| 			 int (*f)(struct rcu_data *rsp, bool *isidle,
 | |
| 				  unsigned long *maxj),
 | |
| 			 bool *isidle, unsigned long *maxj);
 | |
| static void force_quiescent_state(struct rcu_state *rsp);
 | |
| static int rcu_pending(int cpu);
 | |
| 
 | |
| /*
 | |
|  * Return the number of RCU-sched batches processed thus far for debug & stats.
 | |
|  */
 | |
| long rcu_batches_completed_sched(void)
 | |
| {
 | |
| 	return rcu_sched_state.completed;
 | |
| }
 | |
| EXPORT_SYMBOL_GPL(rcu_batches_completed_sched);
 | |
| 
 | |
| /*
 | |
|  * Return the number of RCU BH batches processed thus far for debug & stats.
 | |
|  */
 | |
| long rcu_batches_completed_bh(void)
 | |
| {
 | |
| 	return rcu_bh_state.completed;
 | |
| }
 | |
| EXPORT_SYMBOL_GPL(rcu_batches_completed_bh);
 | |
| 
 | |
| /*
 | |
|  * Force a quiescent state for RCU BH.
 | |
|  */
 | |
| void rcu_bh_force_quiescent_state(void)
 | |
| {
 | |
| 	force_quiescent_state(&rcu_bh_state);
 | |
| }
 | |
| EXPORT_SYMBOL_GPL(rcu_bh_force_quiescent_state);
 | |
| 
 | |
| /*
 | |
|  * Record the number of times rcutorture tests have been initiated and
 | |
|  * terminated.  This information allows the debugfs tracing stats to be
 | |
|  * correlated to the rcutorture messages, even when the rcutorture module
 | |
|  * is being repeatedly loaded and unloaded.  In other words, we cannot
 | |
|  * store this state in rcutorture itself.
 | |
|  */
 | |
| void rcutorture_record_test_transition(void)
 | |
| {
 | |
| 	rcutorture_testseq++;
 | |
| 	rcutorture_vernum = 0;
 | |
| }
 | |
| EXPORT_SYMBOL_GPL(rcutorture_record_test_transition);
 | |
| 
 | |
| /*
 | |
|  * Record the number of writer passes through the current rcutorture test.
 | |
|  * This is also used to correlate debugfs tracing stats with the rcutorture
 | |
|  * messages.
 | |
|  */
 | |
| void rcutorture_record_progress(unsigned long vernum)
 | |
| {
 | |
| 	rcutorture_vernum++;
 | |
| }
 | |
| EXPORT_SYMBOL_GPL(rcutorture_record_progress);
 | |
| 
 | |
| /*
 | |
|  * Force a quiescent state for RCU-sched.
 | |
|  */
 | |
| void rcu_sched_force_quiescent_state(void)
 | |
| {
 | |
| 	force_quiescent_state(&rcu_sched_state);
 | |
| }
 | |
| EXPORT_SYMBOL_GPL(rcu_sched_force_quiescent_state);
 | |
| 
 | |
| /*
 | |
|  * Does the CPU have callbacks ready to be invoked?
 | |
|  */
 | |
| static int
 | |
| cpu_has_callbacks_ready_to_invoke(struct rcu_data *rdp)
 | |
| {
 | |
| 	return &rdp->nxtlist != rdp->nxttail[RCU_DONE_TAIL] &&
 | |
| 	       rdp->nxttail[RCU_DONE_TAIL] != NULL;
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * Does the current CPU require a not-yet-started grace period?
 | |
|  * The caller must have disabled interrupts to prevent races with
 | |
|  * normal callback registry.
 | |
|  */
 | |
| static int
 | |
| cpu_needs_another_gp(struct rcu_state *rsp, struct rcu_data *rdp)
 | |
| {
 | |
| 	int i;
 | |
| 
 | |
| 	if (rcu_gp_in_progress(rsp))
 | |
| 		return 0;  /* No, a grace period is already in progress. */
 | |
| 	if (rcu_nocb_needs_gp(rsp))
 | |
| 		return 1;  /* Yes, a no-CBs CPU needs one. */
 | |
| 	if (!rdp->nxttail[RCU_NEXT_TAIL])
 | |
| 		return 0;  /* No, this is a no-CBs (or offline) CPU. */
 | |
| 	if (*rdp->nxttail[RCU_NEXT_READY_TAIL])
 | |
| 		return 1;  /* Yes, this CPU has newly registered callbacks. */
 | |
| 	for (i = RCU_WAIT_TAIL; i < RCU_NEXT_TAIL; i++)
 | |
| 		if (rdp->nxttail[i - 1] != rdp->nxttail[i] &&
 | |
| 		    ULONG_CMP_LT(ACCESS_ONCE(rsp->completed),
 | |
| 				 rdp->nxtcompleted[i]))
 | |
| 			return 1;  /* Yes, CBs for future grace period. */
 | |
| 	return 0; /* No grace period needed. */
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * Return the root node of the specified rcu_state structure.
 | |
|  */
 | |
| static struct rcu_node *rcu_get_root(struct rcu_state *rsp)
 | |
| {
 | |
| 	return &rsp->node[0];
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * rcu_eqs_enter_common - current CPU is moving towards extended quiescent state
 | |
|  *
 | |
|  * If the new value of the ->dynticks_nesting counter now is zero,
 | |
|  * we really have entered idle, and must do the appropriate accounting.
 | |
|  * The caller must have disabled interrupts.
 | |
|  */
 | |
| static void rcu_eqs_enter_common(struct rcu_dynticks *rdtp, long long oldval,
 | |
| 				bool user)
 | |
| {
 | |
| 	struct rcu_state *rsp;
 | |
| 	struct rcu_data *rdp;
 | |
| 
 | |
| 	trace_rcu_dyntick(TPS("Start"), oldval, rdtp->dynticks_nesting);
 | |
| 	if (!user && !is_idle_task(current)) {
 | |
| 		struct task_struct *idle __maybe_unused =
 | |
| 			idle_task(smp_processor_id());
 | |
| 
 | |
| 		trace_rcu_dyntick(TPS("Error on entry: not idle task"), oldval, 0);
 | |
| 		ftrace_dump(DUMP_ORIG);
 | |
| 		WARN_ONCE(1, "Current pid: %d comm: %s / Idle pid: %d comm: %s",
 | |
| 			  current->pid, current->comm,
 | |
| 			  idle->pid, idle->comm); /* must be idle task! */
 | |
| 	}
 | |
| 	for_each_rcu_flavor(rsp) {
 | |
| 		rdp = this_cpu_ptr(rsp->rda);
 | |
| 		do_nocb_deferred_wakeup(rdp);
 | |
| 	}
 | |
| 	rcu_prepare_for_idle(smp_processor_id());
 | |
| 	/* CPUs seeing atomic_inc() must see prior RCU read-side crit sects */
 | |
| 	smp_mb__before_atomic_inc();  /* See above. */
 | |
| 	atomic_inc(&rdtp->dynticks);
 | |
| 	smp_mb__after_atomic_inc();  /* Force ordering with next sojourn. */
 | |
| 	WARN_ON_ONCE(atomic_read(&rdtp->dynticks) & 0x1);
 | |
| 
 | |
| 	/*
 | |
| 	 * It is illegal to enter an extended quiescent state while
 | |
| 	 * in an RCU read-side critical section.
 | |
| 	 */
 | |
| 	rcu_lockdep_assert(!lock_is_held(&rcu_lock_map),
 | |
| 			   "Illegal idle entry in RCU read-side critical section.");
 | |
| 	rcu_lockdep_assert(!lock_is_held(&rcu_bh_lock_map),
 | |
| 			   "Illegal idle entry in RCU-bh read-side critical section.");
 | |
| 	rcu_lockdep_assert(!lock_is_held(&rcu_sched_lock_map),
 | |
| 			   "Illegal idle entry in RCU-sched read-side critical section.");
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * Enter an RCU extended quiescent state, which can be either the
 | |
|  * idle loop or adaptive-tickless usermode execution.
 | |
|  */
 | |
| static void rcu_eqs_enter(bool user)
 | |
| {
 | |
| 	long long oldval;
 | |
| 	struct rcu_dynticks *rdtp;
 | |
| 
 | |
| 	rdtp = this_cpu_ptr(&rcu_dynticks);
 | |
| 	oldval = rdtp->dynticks_nesting;
 | |
| 	WARN_ON_ONCE((oldval & DYNTICK_TASK_NEST_MASK) == 0);
 | |
| 	if ((oldval & DYNTICK_TASK_NEST_MASK) == DYNTICK_TASK_NEST_VALUE) {
 | |
| 		rdtp->dynticks_nesting = 0;
 | |
| 		rcu_eqs_enter_common(rdtp, oldval, user);
 | |
| 	} else {
 | |
| 		rdtp->dynticks_nesting -= DYNTICK_TASK_NEST_VALUE;
 | |
| 	}
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * rcu_idle_enter - inform RCU that current CPU is entering idle
 | |
|  *
 | |
|  * Enter idle mode, in other words, -leave- the mode in which RCU
 | |
|  * read-side critical sections can occur.  (Though RCU read-side
 | |
|  * critical sections can occur in irq handlers in idle, a possibility
 | |
|  * handled by irq_enter() and irq_exit().)
 | |
|  *
 | |
|  * We crowbar the ->dynticks_nesting field to zero to allow for
 | |
|  * the possibility of usermode upcalls having messed up our count
 | |
|  * of interrupt nesting level during the prior busy period.
 | |
|  */
 | |
| void rcu_idle_enter(void)
 | |
| {
 | |
| 	unsigned long flags;
 | |
| 
 | |
| 	local_irq_save(flags);
 | |
| 	rcu_eqs_enter(false);
 | |
| 	rcu_sysidle_enter(this_cpu_ptr(&rcu_dynticks), 0);
 | |
| 	local_irq_restore(flags);
 | |
| }
 | |
| EXPORT_SYMBOL_GPL(rcu_idle_enter);
 | |
| 
 | |
| #ifdef CONFIG_RCU_USER_QS
 | |
| /**
 | |
|  * rcu_user_enter - inform RCU that we are resuming userspace.
 | |
|  *
 | |
|  * Enter RCU idle mode right before resuming userspace.  No use of RCU
 | |
|  * is permitted between this call and rcu_user_exit(). This way the
 | |
|  * CPU doesn't need to maintain the tick for RCU maintenance purposes
 | |
|  * when the CPU runs in userspace.
 | |
|  */
 | |
| void rcu_user_enter(void)
 | |
| {
 | |
| 	rcu_eqs_enter(1);
 | |
| }
 | |
| #endif /* CONFIG_RCU_USER_QS */
 | |
| 
 | |
| /**
 | |
|  * rcu_irq_exit - inform RCU that current CPU is exiting irq towards idle
 | |
|  *
 | |
|  * Exit from an interrupt handler, which might possibly result in entering
 | |
|  * idle mode, in other words, leaving the mode in which read-side critical
 | |
|  * sections can occur.
 | |
|  *
 | |
|  * This code assumes that the idle loop never does anything that might
 | |
|  * result in unbalanced calls to irq_enter() and irq_exit().  If your
 | |
|  * architecture violates this assumption, RCU will give you what you
 | |
|  * deserve, good and hard.  But very infrequently and irreproducibly.
 | |
|  *
 | |
|  * Use things like work queues to work around this limitation.
 | |
|  *
 | |
|  * You have been warned.
 | |
|  */
 | |
| void rcu_irq_exit(void)
 | |
| {
 | |
| 	unsigned long flags;
 | |
| 	long long oldval;
 | |
| 	struct rcu_dynticks *rdtp;
 | |
| 
 | |
| 	local_irq_save(flags);
 | |
| 	rdtp = this_cpu_ptr(&rcu_dynticks);
 | |
| 	oldval = rdtp->dynticks_nesting;
 | |
| 	rdtp->dynticks_nesting--;
 | |
| 	WARN_ON_ONCE(rdtp->dynticks_nesting < 0);
 | |
| 	if (rdtp->dynticks_nesting)
 | |
| 		trace_rcu_dyntick(TPS("--="), oldval, rdtp->dynticks_nesting);
 | |
| 	else
 | |
| 		rcu_eqs_enter_common(rdtp, oldval, true);
 | |
| 	rcu_sysidle_enter(rdtp, 1);
 | |
| 	local_irq_restore(flags);
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * rcu_eqs_exit_common - current CPU moving away from extended quiescent state
 | |
|  *
 | |
|  * If the new value of the ->dynticks_nesting counter was previously zero,
 | |
|  * we really have exited idle, and must do the appropriate accounting.
 | |
|  * The caller must have disabled interrupts.
 | |
|  */
 | |
| static void rcu_eqs_exit_common(struct rcu_dynticks *rdtp, long long oldval,
 | |
| 			       int user)
 | |
| {
 | |
| 	smp_mb__before_atomic_inc();  /* Force ordering w/previous sojourn. */
 | |
| 	atomic_inc(&rdtp->dynticks);
 | |
| 	/* CPUs seeing atomic_inc() must see later RCU read-side crit sects */
 | |
| 	smp_mb__after_atomic_inc();  /* See above. */
 | |
| 	WARN_ON_ONCE(!(atomic_read(&rdtp->dynticks) & 0x1));
 | |
| 	rcu_cleanup_after_idle(smp_processor_id());
 | |
| 	trace_rcu_dyntick(TPS("End"), oldval, rdtp->dynticks_nesting);
 | |
| 	if (!user && !is_idle_task(current)) {
 | |
| 		struct task_struct *idle __maybe_unused =
 | |
| 			idle_task(smp_processor_id());
 | |
| 
 | |
| 		trace_rcu_dyntick(TPS("Error on exit: not idle task"),
 | |
| 				  oldval, rdtp->dynticks_nesting);
 | |
| 		ftrace_dump(DUMP_ORIG);
 | |
| 		WARN_ONCE(1, "Current pid: %d comm: %s / Idle pid: %d comm: %s",
 | |
| 			  current->pid, current->comm,
 | |
| 			  idle->pid, idle->comm); /* must be idle task! */
 | |
| 	}
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * Exit an RCU extended quiescent state, which can be either the
 | |
|  * idle loop or adaptive-tickless usermode execution.
 | |
|  */
 | |
| static void rcu_eqs_exit(bool user)
 | |
| {
 | |
| 	struct rcu_dynticks *rdtp;
 | |
| 	long long oldval;
 | |
| 
 | |
| 	rdtp = this_cpu_ptr(&rcu_dynticks);
 | |
| 	oldval = rdtp->dynticks_nesting;
 | |
| 	WARN_ON_ONCE(oldval < 0);
 | |
| 	if (oldval & DYNTICK_TASK_NEST_MASK) {
 | |
| 		rdtp->dynticks_nesting += DYNTICK_TASK_NEST_VALUE;
 | |
| 	} else {
 | |
| 		rdtp->dynticks_nesting = DYNTICK_TASK_EXIT_IDLE;
 | |
| 		rcu_eqs_exit_common(rdtp, oldval, user);
 | |
| 	}
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * rcu_idle_exit - inform RCU that current CPU is leaving idle
 | |
|  *
 | |
|  * Exit idle mode, in other words, -enter- the mode in which RCU
 | |
|  * read-side critical sections can occur.
 | |
|  *
 | |
|  * We crowbar the ->dynticks_nesting field to DYNTICK_TASK_NEST to
 | |
|  * allow for the possibility of usermode upcalls messing up our count
 | |
|  * of interrupt nesting level during the busy period that is just
 | |
|  * now starting.
 | |
|  */
 | |
| void rcu_idle_exit(void)
 | |
| {
 | |
| 	unsigned long flags;
 | |
| 
 | |
| 	local_irq_save(flags);
 | |
| 	rcu_eqs_exit(false);
 | |
| 	rcu_sysidle_exit(this_cpu_ptr(&rcu_dynticks), 0);
 | |
| 	local_irq_restore(flags);
 | |
| }
 | |
| EXPORT_SYMBOL_GPL(rcu_idle_exit);
 | |
| 
 | |
| #ifdef CONFIG_RCU_USER_QS
 | |
| /**
 | |
|  * rcu_user_exit - inform RCU that we are exiting userspace.
 | |
|  *
 | |
|  * Exit RCU idle mode while entering the kernel because it can
 | |
|  * run a RCU read side critical section anytime.
 | |
|  */
 | |
| void rcu_user_exit(void)
 | |
| {
 | |
| 	rcu_eqs_exit(1);
 | |
| }
 | |
| #endif /* CONFIG_RCU_USER_QS */
 | |
| 
 | |
| /**
 | |
|  * rcu_irq_enter - inform RCU that current CPU is entering irq away from idle
 | |
|  *
 | |
|  * Enter an interrupt handler, which might possibly result in exiting
 | |
|  * idle mode, in other words, entering the mode in which read-side critical
 | |
|  * sections can occur.
 | |
|  *
 | |
|  * Note that the Linux kernel is fully capable of entering an interrupt
 | |
|  * handler that it never exits, for example when doing upcalls to
 | |
|  * user mode!  This code assumes that the idle loop never does upcalls to
 | |
|  * user mode.  If your architecture does do upcalls from the idle loop (or
 | |
|  * does anything else that results in unbalanced calls to the irq_enter()
 | |
|  * and irq_exit() functions), RCU will give you what you deserve, good
 | |
|  * and hard.  But very infrequently and irreproducibly.
 | |
|  *
 | |
|  * Use things like work queues to work around this limitation.
 | |
|  *
 | |
|  * You have been warned.
 | |
|  */
 | |
| void rcu_irq_enter(void)
 | |
| {
 | |
| 	unsigned long flags;
 | |
| 	struct rcu_dynticks *rdtp;
 | |
| 	long long oldval;
 | |
| 
 | |
| 	local_irq_save(flags);
 | |
| 	rdtp = this_cpu_ptr(&rcu_dynticks);
 | |
| 	oldval = rdtp->dynticks_nesting;
 | |
| 	rdtp->dynticks_nesting++;
 | |
| 	WARN_ON_ONCE(rdtp->dynticks_nesting == 0);
 | |
| 	if (oldval)
 | |
| 		trace_rcu_dyntick(TPS("++="), oldval, rdtp->dynticks_nesting);
 | |
| 	else
 | |
| 		rcu_eqs_exit_common(rdtp, oldval, true);
 | |
| 	rcu_sysidle_exit(rdtp, 1);
 | |
| 	local_irq_restore(flags);
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * rcu_nmi_enter - inform RCU of entry to NMI context
 | |
|  *
 | |
|  * If the CPU was idle with dynamic ticks active, and there is no
 | |
|  * irq handler running, this updates rdtp->dynticks_nmi to let the
 | |
|  * RCU grace-period handling know that the CPU is active.
 | |
|  */
 | |
| void rcu_nmi_enter(void)
 | |
| {
 | |
| 	struct rcu_dynticks *rdtp = this_cpu_ptr(&rcu_dynticks);
 | |
| 
 | |
| 	if (rdtp->dynticks_nmi_nesting == 0 &&
 | |
| 	    (atomic_read(&rdtp->dynticks) & 0x1))
 | |
| 		return;
 | |
| 	rdtp->dynticks_nmi_nesting++;
 | |
| 	smp_mb__before_atomic_inc();  /* Force delay from prior write. */
 | |
| 	atomic_inc(&rdtp->dynticks);
 | |
| 	/* CPUs seeing atomic_inc() must see later RCU read-side crit sects */
 | |
| 	smp_mb__after_atomic_inc();  /* See above. */
 | |
| 	WARN_ON_ONCE(!(atomic_read(&rdtp->dynticks) & 0x1));
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * rcu_nmi_exit - inform RCU of exit from NMI context
 | |
|  *
 | |
|  * If the CPU was idle with dynamic ticks active, and there is no
 | |
|  * irq handler running, this updates rdtp->dynticks_nmi to let the
 | |
|  * RCU grace-period handling know that the CPU is no longer active.
 | |
|  */
 | |
| void rcu_nmi_exit(void)
 | |
| {
 | |
| 	struct rcu_dynticks *rdtp = this_cpu_ptr(&rcu_dynticks);
 | |
| 
 | |
| 	if (rdtp->dynticks_nmi_nesting == 0 ||
 | |
| 	    --rdtp->dynticks_nmi_nesting != 0)
 | |
| 		return;
 | |
| 	/* CPUs seeing atomic_inc() must see prior RCU read-side crit sects */
 | |
| 	smp_mb__before_atomic_inc();  /* See above. */
 | |
| 	atomic_inc(&rdtp->dynticks);
 | |
| 	smp_mb__after_atomic_inc();  /* Force delay to next write. */
 | |
| 	WARN_ON_ONCE(atomic_read(&rdtp->dynticks) & 0x1);
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * __rcu_is_watching - are RCU read-side critical sections safe?
 | |
|  *
 | |
|  * Return true if RCU is watching the running CPU, which means that
 | |
|  * this CPU can safely enter RCU read-side critical sections.  Unlike
 | |
|  * rcu_is_watching(), the caller of __rcu_is_watching() must have at
 | |
|  * least disabled preemption.
 | |
|  */
 | |
| bool notrace __rcu_is_watching(void)
 | |
| {
 | |
| 	return atomic_read(this_cpu_ptr(&rcu_dynticks.dynticks)) & 0x1;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * rcu_is_watching - see if RCU thinks that the current CPU is idle
 | |
|  *
 | |
|  * If the current CPU is in its idle loop and is neither in an interrupt
 | |
|  * or NMI handler, return true.
 | |
|  */
 | |
| bool notrace rcu_is_watching(void)
 | |
| {
 | |
| 	int ret;
 | |
| 
 | |
| 	preempt_disable();
 | |
| 	ret = __rcu_is_watching();
 | |
| 	preempt_enable();
 | |
| 	return ret;
 | |
| }
 | |
| EXPORT_SYMBOL_GPL(rcu_is_watching);
 | |
| 
 | |
| #if defined(CONFIG_PROVE_RCU) && defined(CONFIG_HOTPLUG_CPU)
 | |
| 
 | |
| /*
 | |
|  * Is the current CPU online?  Disable preemption to avoid false positives
 | |
|  * that could otherwise happen due to the current CPU number being sampled,
 | |
|  * this task being preempted, its old CPU being taken offline, resuming
 | |
|  * on some other CPU, then determining that its old CPU is now offline.
 | |
|  * It is OK to use RCU on an offline processor during initial boot, hence
 | |
|  * the check for rcu_scheduler_fully_active.  Note also that it is OK
 | |
|  * for a CPU coming online to use RCU for one jiffy prior to marking itself
 | |
|  * online in the cpu_online_mask.  Similarly, it is OK for a CPU going
 | |
|  * offline to continue to use RCU for one jiffy after marking itself
 | |
|  * offline in the cpu_online_mask.  This leniency is necessary given the
 | |
|  * non-atomic nature of the online and offline processing, for example,
 | |
|  * the fact that a CPU enters the scheduler after completing the CPU_DYING
 | |
|  * notifiers.
 | |
|  *
 | |
|  * This is also why RCU internally marks CPUs online during the
 | |
|  * CPU_UP_PREPARE phase and offline during the CPU_DEAD phase.
 | |
|  *
 | |
|  * Disable checking if in an NMI handler because we cannot safely report
 | |
|  * errors from NMI handlers anyway.
 | |
|  */
 | |
| bool rcu_lockdep_current_cpu_online(void)
 | |
| {
 | |
| 	struct rcu_data *rdp;
 | |
| 	struct rcu_node *rnp;
 | |
| 	bool ret;
 | |
| 
 | |
| 	if (in_nmi())
 | |
| 		return true;
 | |
| 	preempt_disable();
 | |
| 	rdp = this_cpu_ptr(&rcu_sched_data);
 | |
| 	rnp = rdp->mynode;
 | |
| 	ret = (rdp->grpmask & rnp->qsmaskinit) ||
 | |
| 	      !rcu_scheduler_fully_active;
 | |
| 	preempt_enable();
 | |
| 	return ret;
 | |
| }
 | |
| EXPORT_SYMBOL_GPL(rcu_lockdep_current_cpu_online);
 | |
| 
 | |
| #endif /* #if defined(CONFIG_PROVE_RCU) && defined(CONFIG_HOTPLUG_CPU) */
 | |
| 
 | |
| /**
 | |
|  * rcu_is_cpu_rrupt_from_idle - see if idle or immediately interrupted from idle
 | |
|  *
 | |
|  * If the current CPU is idle or running at a first-level (not nested)
 | |
|  * interrupt from idle, return true.  The caller must have at least
 | |
|  * disabled preemption.
 | |
|  */
 | |
| static int rcu_is_cpu_rrupt_from_idle(void)
 | |
| {
 | |
| 	return __this_cpu_read(rcu_dynticks.dynticks_nesting) <= 1;
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * Snapshot the specified CPU's dynticks counter so that we can later
 | |
|  * credit them with an implicit quiescent state.  Return 1 if this CPU
 | |
|  * is in dynticks idle mode, which is an extended quiescent state.
 | |
|  */
 | |
| static int dyntick_save_progress_counter(struct rcu_data *rdp,
 | |
| 					 bool *isidle, unsigned long *maxj)
 | |
| {
 | |
| 	rdp->dynticks_snap = atomic_add_return(0, &rdp->dynticks->dynticks);
 | |
| 	rcu_sysidle_check_cpu(rdp, isidle, maxj);
 | |
| 	return (rdp->dynticks_snap & 0x1) == 0;
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * This function really isn't for public consumption, but RCU is special in
 | |
|  * that context switches can allow the state machine to make progress.
 | |
|  */
 | |
| extern void resched_cpu(int cpu);
 | |
| 
 | |
| /*
 | |
|  * Return true if the specified CPU has passed through a quiescent
 | |
|  * state by virtue of being in or having passed through an dynticks
 | |
|  * idle state since the last call to dyntick_save_progress_counter()
 | |
|  * for this same CPU, or by virtue of having been offline.
 | |
|  */
 | |
| static int rcu_implicit_dynticks_qs(struct rcu_data *rdp,
 | |
| 				    bool *isidle, unsigned long *maxj)
 | |
| {
 | |
| 	unsigned int curr;
 | |
| 	unsigned int snap;
 | |
| 
 | |
| 	curr = (unsigned int)atomic_add_return(0, &rdp->dynticks->dynticks);
 | |
| 	snap = (unsigned int)rdp->dynticks_snap;
 | |
| 
 | |
| 	/*
 | |
| 	 * If the CPU passed through or entered a dynticks idle phase with
 | |
| 	 * no active irq/NMI handlers, then we can safely pretend that the CPU
 | |
| 	 * already acknowledged the request to pass through a quiescent
 | |
| 	 * state.  Either way, that CPU cannot possibly be in an RCU
 | |
| 	 * read-side critical section that started before the beginning
 | |
| 	 * of the current RCU grace period.
 | |
| 	 */
 | |
| 	if ((curr & 0x1) == 0 || UINT_CMP_GE(curr, snap + 2)) {
 | |
| 		trace_rcu_fqs(rdp->rsp->name, rdp->gpnum, rdp->cpu, TPS("dti"));
 | |
| 		rdp->dynticks_fqs++;
 | |
| 		return 1;
 | |
| 	}
 | |
| 
 | |
| 	/*
 | |
| 	 * Check for the CPU being offline, but only if the grace period
 | |
| 	 * is old enough.  We don't need to worry about the CPU changing
 | |
| 	 * state: If we see it offline even once, it has been through a
 | |
| 	 * quiescent state.
 | |
| 	 *
 | |
| 	 * The reason for insisting that the grace period be at least
 | |
| 	 * one jiffy old is that CPUs that are not quite online and that
 | |
| 	 * have just gone offline can still execute RCU read-side critical
 | |
| 	 * sections.
 | |
| 	 */
 | |
| 	if (ULONG_CMP_GE(rdp->rsp->gp_start + 2, jiffies))
 | |
| 		return 0;  /* Grace period is not old enough. */
 | |
| 	barrier();
 | |
| 	if (cpu_is_offline(rdp->cpu)) {
 | |
| 		trace_rcu_fqs(rdp->rsp->name, rdp->gpnum, rdp->cpu, TPS("ofl"));
 | |
| 		rdp->offline_fqs++;
 | |
| 		return 1;
 | |
| 	}
 | |
| 
 | |
| 	/*
 | |
| 	 * There is a possibility that a CPU in adaptive-ticks state
 | |
| 	 * might run in the kernel with the scheduling-clock tick disabled
 | |
| 	 * for an extended time period.  Invoke rcu_kick_nohz_cpu() to
 | |
| 	 * force the CPU to restart the scheduling-clock tick in this
 | |
| 	 * CPU is in this state.
 | |
| 	 */
 | |
| 	rcu_kick_nohz_cpu(rdp->cpu);
 | |
| 
 | |
| 	/*
 | |
| 	 * Alternatively, the CPU might be running in the kernel
 | |
| 	 * for an extended period of time without a quiescent state.
 | |
| 	 * Attempt to force the CPU through the scheduler to gain the
 | |
| 	 * needed quiescent state, but only if the grace period has gone
 | |
| 	 * on for an uncommonly long time.  If there are many stuck CPUs,
 | |
| 	 * we will beat on the first one until it gets unstuck, then move
 | |
| 	 * to the next.  Only do this for the primary flavor of RCU.
 | |
| 	 */
 | |
| 	if (rdp->rsp == rcu_state &&
 | |
| 	    ULONG_CMP_GE(jiffies, rdp->rsp->jiffies_resched)) {
 | |
| 		rdp->rsp->jiffies_resched += 5;
 | |
| 		resched_cpu(rdp->cpu);
 | |
| 	}
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static void record_gp_stall_check_time(struct rcu_state *rsp)
 | |
| {
 | |
| 	unsigned long j = jiffies;
 | |
| 	unsigned long j1;
 | |
| 
 | |
| 	rsp->gp_start = j;
 | |
| 	smp_wmb(); /* Record start time before stall time. */
 | |
| 	j1 = rcu_jiffies_till_stall_check();
 | |
| 	rsp->jiffies_stall = j + j1;
 | |
| 	rsp->jiffies_resched = j + j1 / 2;
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * Dump stacks of all tasks running on stalled CPUs.  This is a fallback
 | |
|  * for architectures that do not implement trigger_all_cpu_backtrace().
 | |
|  * The NMI-triggered stack traces are more accurate because they are
 | |
|  * printed by the target CPU.
 | |
|  */
 | |
| static void rcu_dump_cpu_stacks(struct rcu_state *rsp)
 | |
| {
 | |
| 	int cpu;
 | |
| 	unsigned long flags;
 | |
| 	struct rcu_node *rnp;
 | |
| 
 | |
| 	rcu_for_each_leaf_node(rsp, rnp) {
 | |
| 		raw_spin_lock_irqsave(&rnp->lock, flags);
 | |
| 		if (rnp->qsmask != 0) {
 | |
| 			for (cpu = 0; cpu <= rnp->grphi - rnp->grplo; cpu++)
 | |
| 				if (rnp->qsmask & (1UL << cpu))
 | |
| 					dump_cpu_task(rnp->grplo + cpu);
 | |
| 		}
 | |
| 		raw_spin_unlock_irqrestore(&rnp->lock, flags);
 | |
| 	}
 | |
| }
 | |
| 
 | |
| static void print_other_cpu_stall(struct rcu_state *rsp)
 | |
| {
 | |
| 	int cpu;
 | |
| 	long delta;
 | |
| 	unsigned long flags;
 | |
| 	int ndetected = 0;
 | |
| 	struct rcu_node *rnp = rcu_get_root(rsp);
 | |
| 	long totqlen = 0;
 | |
| 
 | |
| 	/* Only let one CPU complain about others per time interval. */
 | |
| 
 | |
| 	raw_spin_lock_irqsave(&rnp->lock, flags);
 | |
| 	delta = jiffies - rsp->jiffies_stall;
 | |
| 	if (delta < RCU_STALL_RAT_DELAY || !rcu_gp_in_progress(rsp)) {
 | |
| 		raw_spin_unlock_irqrestore(&rnp->lock, flags);
 | |
| 		return;
 | |
| 	}
 | |
| 	rsp->jiffies_stall = jiffies + 3 * rcu_jiffies_till_stall_check() + 3;
 | |
| 	raw_spin_unlock_irqrestore(&rnp->lock, flags);
 | |
| 
 | |
| 	/*
 | |
| 	 * OK, time to rat on our buddy...
 | |
| 	 * See Documentation/RCU/stallwarn.txt for info on how to debug
 | |
| 	 * RCU CPU stall warnings.
 | |
| 	 */
 | |
| 	pr_err("INFO: %s detected stalls on CPUs/tasks:",
 | |
| 	       rsp->name);
 | |
| 	print_cpu_stall_info_begin();
 | |
| 	rcu_for_each_leaf_node(rsp, rnp) {
 | |
| 		raw_spin_lock_irqsave(&rnp->lock, flags);
 | |
| 		ndetected += rcu_print_task_stall(rnp);
 | |
| 		if (rnp->qsmask != 0) {
 | |
| 			for (cpu = 0; cpu <= rnp->grphi - rnp->grplo; cpu++)
 | |
| 				if (rnp->qsmask & (1UL << cpu)) {
 | |
| 					print_cpu_stall_info(rsp,
 | |
| 							     rnp->grplo + cpu);
 | |
| 					ndetected++;
 | |
| 				}
 | |
| 		}
 | |
| 		raw_spin_unlock_irqrestore(&rnp->lock, flags);
 | |
| 	}
 | |
| 
 | |
| 	/*
 | |
| 	 * Now rat on any tasks that got kicked up to the root rcu_node
 | |
| 	 * due to CPU offlining.
 | |
| 	 */
 | |
| 	rnp = rcu_get_root(rsp);
 | |
| 	raw_spin_lock_irqsave(&rnp->lock, flags);
 | |
| 	ndetected += rcu_print_task_stall(rnp);
 | |
| 	raw_spin_unlock_irqrestore(&rnp->lock, flags);
 | |
| 
 | |
| 	print_cpu_stall_info_end();
 | |
| 	for_each_possible_cpu(cpu)
 | |
| 		totqlen += per_cpu_ptr(rsp->rda, cpu)->qlen;
 | |
| 	pr_cont("(detected by %d, t=%ld jiffies, g=%lu, c=%lu, q=%lu)\n",
 | |
| 	       smp_processor_id(), (long)(jiffies - rsp->gp_start),
 | |
| 	       rsp->gpnum, rsp->completed, totqlen);
 | |
| 	if (ndetected == 0)
 | |
| 		pr_err("INFO: Stall ended before state dump start\n");
 | |
| 	else if (!trigger_all_cpu_backtrace())
 | |
| 		rcu_dump_cpu_stacks(rsp);
 | |
| 
 | |
| 	/* Complain about tasks blocking the grace period. */
 | |
| 
 | |
| 	rcu_print_detail_task_stall(rsp);
 | |
| 
 | |
| 	force_quiescent_state(rsp);  /* Kick them all. */
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * This function really isn't for public consumption, but RCU is special in
 | |
|  * that context switches can allow the state machine to make progress.
 | |
|  */
 | |
| extern void resched_cpu(int cpu);
 | |
| 
 | |
| static void print_cpu_stall(struct rcu_state *rsp)
 | |
| {
 | |
| 	int cpu;
 | |
| 	unsigned long flags;
 | |
| 	struct rcu_node *rnp = rcu_get_root(rsp);
 | |
| 	long totqlen = 0;
 | |
| 
 | |
| 	/*
 | |
| 	 * OK, time to rat on ourselves...
 | |
| 	 * See Documentation/RCU/stallwarn.txt for info on how to debug
 | |
| 	 * RCU CPU stall warnings.
 | |
| 	 */
 | |
| 	pr_err("INFO: %s self-detected stall on CPU", rsp->name);
 | |
| 	print_cpu_stall_info_begin();
 | |
| 	print_cpu_stall_info(rsp, smp_processor_id());
 | |
| 	print_cpu_stall_info_end();
 | |
| 	for_each_possible_cpu(cpu)
 | |
| 		totqlen += per_cpu_ptr(rsp->rda, cpu)->qlen;
 | |
| 	pr_cont(" (t=%lu jiffies g=%lu c=%lu q=%lu)\n",
 | |
| 		jiffies - rsp->gp_start, rsp->gpnum, rsp->completed, totqlen);
 | |
| 	if (!trigger_all_cpu_backtrace())
 | |
| 		dump_stack();
 | |
| 
 | |
| 	raw_spin_lock_irqsave(&rnp->lock, flags);
 | |
| 	if (ULONG_CMP_GE(jiffies, rsp->jiffies_stall))
 | |
| 		rsp->jiffies_stall = jiffies +
 | |
| 				     3 * rcu_jiffies_till_stall_check() + 3;
 | |
| 	raw_spin_unlock_irqrestore(&rnp->lock, flags);
 | |
| 
 | |
| 	/*
 | |
| 	 * Attempt to revive the RCU machinery by forcing a context switch.
 | |
| 	 *
 | |
| 	 * A context switch would normally allow the RCU state machine to make
 | |
| 	 * progress and it could be we're stuck in kernel space without context
 | |
| 	 * switches for an entirely unreasonable amount of time.
 | |
| 	 */
 | |
| 	resched_cpu(smp_processor_id());
 | |
| }
 | |
| 
 | |
| static void check_cpu_stall(struct rcu_state *rsp, struct rcu_data *rdp)
 | |
| {
 | |
| 	unsigned long completed;
 | |
| 	unsigned long gpnum;
 | |
| 	unsigned long gps;
 | |
| 	unsigned long j;
 | |
| 	unsigned long js;
 | |
| 	struct rcu_node *rnp;
 | |
| 
 | |
| 	if (rcu_cpu_stall_suppress || !rcu_gp_in_progress(rsp))
 | |
| 		return;
 | |
| 	j = jiffies;
 | |
| 
 | |
| 	/*
 | |
| 	 * Lots of memory barriers to reject false positives.
 | |
| 	 *
 | |
| 	 * The idea is to pick up rsp->gpnum, then rsp->jiffies_stall,
 | |
| 	 * then rsp->gp_start, and finally rsp->completed.  These values
 | |
| 	 * are updated in the opposite order with memory barriers (or
 | |
| 	 * equivalent) during grace-period initialization and cleanup.
 | |
| 	 * Now, a false positive can occur if we get an new value of
 | |
| 	 * rsp->gp_start and a old value of rsp->jiffies_stall.  But given
 | |
| 	 * the memory barriers, the only way that this can happen is if one
 | |
| 	 * grace period ends and another starts between these two fetches.
 | |
| 	 * Detect this by comparing rsp->completed with the previous fetch
 | |
| 	 * from rsp->gpnum.
 | |
| 	 *
 | |
| 	 * Given this check, comparisons of jiffies, rsp->jiffies_stall,
 | |
| 	 * and rsp->gp_start suffice to forestall false positives.
 | |
| 	 */
 | |
| 	gpnum = ACCESS_ONCE(rsp->gpnum);
 | |
| 	smp_rmb(); /* Pick up ->gpnum first... */
 | |
| 	js = ACCESS_ONCE(rsp->jiffies_stall);
 | |
| 	smp_rmb(); /* ...then ->jiffies_stall before the rest... */
 | |
| 	gps = ACCESS_ONCE(rsp->gp_start);
 | |
| 	smp_rmb(); /* ...and finally ->gp_start before ->completed. */
 | |
| 	completed = ACCESS_ONCE(rsp->completed);
 | |
| 	if (ULONG_CMP_GE(completed, gpnum) ||
 | |
| 	    ULONG_CMP_LT(j, js) ||
 | |
| 	    ULONG_CMP_GE(gps, js))
 | |
| 		return; /* No stall or GP completed since entering function. */
 | |
| 	rnp = rdp->mynode;
 | |
| 	if (rcu_gp_in_progress(rsp) &&
 | |
| 	    (ACCESS_ONCE(rnp->qsmask) & rdp->grpmask)) {
 | |
| 
 | |
| 		/* We haven't checked in, so go dump stack. */
 | |
| 		print_cpu_stall(rsp);
 | |
| 
 | |
| 	} else if (rcu_gp_in_progress(rsp) &&
 | |
| 		   ULONG_CMP_GE(j, js + RCU_STALL_RAT_DELAY)) {
 | |
| 
 | |
| 		/* They had a few time units to dump stack, so complain. */
 | |
| 		print_other_cpu_stall(rsp);
 | |
| 	}
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * rcu_cpu_stall_reset - prevent further stall warnings in current grace period
 | |
|  *
 | |
|  * Set the stall-warning timeout way off into the future, thus preventing
 | |
|  * any RCU CPU stall-warning messages from appearing in the current set of
 | |
|  * RCU grace periods.
 | |
|  *
 | |
|  * The caller must disable hard irqs.
 | |
|  */
 | |
| void rcu_cpu_stall_reset(void)
 | |
| {
 | |
| 	struct rcu_state *rsp;
 | |
| 
 | |
| 	for_each_rcu_flavor(rsp)
 | |
| 		rsp->jiffies_stall = jiffies + ULONG_MAX / 2;
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * Initialize the specified rcu_data structure's callback list to empty.
 | |
|  */
 | |
| static void init_callback_list(struct rcu_data *rdp)
 | |
| {
 | |
| 	int i;
 | |
| 
 | |
| 	if (init_nocb_callback_list(rdp))
 | |
| 		return;
 | |
| 	rdp->nxtlist = NULL;
 | |
| 	for (i = 0; i < RCU_NEXT_SIZE; i++)
 | |
| 		rdp->nxttail[i] = &rdp->nxtlist;
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * Determine the value that ->completed will have at the end of the
 | |
|  * next subsequent grace period.  This is used to tag callbacks so that
 | |
|  * a CPU can invoke callbacks in a timely fashion even if that CPU has
 | |
|  * been dyntick-idle for an extended period with callbacks under the
 | |
|  * influence of RCU_FAST_NO_HZ.
 | |
|  *
 | |
|  * The caller must hold rnp->lock with interrupts disabled.
 | |
|  */
 | |
| static unsigned long rcu_cbs_completed(struct rcu_state *rsp,
 | |
| 				       struct rcu_node *rnp)
 | |
| {
 | |
| 	/*
 | |
| 	 * If RCU is idle, we just wait for the next grace period.
 | |
| 	 * But we can only be sure that RCU is idle if we are looking
 | |
| 	 * at the root rcu_node structure -- otherwise, a new grace
 | |
| 	 * period might have started, but just not yet gotten around
 | |
| 	 * to initializing the current non-root rcu_node structure.
 | |
| 	 */
 | |
| 	if (rcu_get_root(rsp) == rnp && rnp->gpnum == rnp->completed)
 | |
| 		return rnp->completed + 1;
 | |
| 
 | |
| 	/*
 | |
| 	 * Otherwise, wait for a possible partial grace period and
 | |
| 	 * then the subsequent full grace period.
 | |
| 	 */
 | |
| 	return rnp->completed + 2;
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * Trace-event helper function for rcu_start_future_gp() and
 | |
|  * rcu_nocb_wait_gp().
 | |
|  */
 | |
| static void trace_rcu_future_gp(struct rcu_node *rnp, struct rcu_data *rdp,
 | |
| 				unsigned long c, const char *s)
 | |
| {
 | |
| 	trace_rcu_future_grace_period(rdp->rsp->name, rnp->gpnum,
 | |
| 				      rnp->completed, c, rnp->level,
 | |
| 				      rnp->grplo, rnp->grphi, s);
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * Start some future grace period, as needed to handle newly arrived
 | |
|  * callbacks.  The required future grace periods are recorded in each
 | |
|  * rcu_node structure's ->need_future_gp field.
 | |
|  *
 | |
|  * The caller must hold the specified rcu_node structure's ->lock.
 | |
|  */
 | |
| static unsigned long __maybe_unused
 | |
| rcu_start_future_gp(struct rcu_node *rnp, struct rcu_data *rdp)
 | |
| {
 | |
| 	unsigned long c;
 | |
| 	int i;
 | |
| 	struct rcu_node *rnp_root = rcu_get_root(rdp->rsp);
 | |
| 
 | |
| 	/*
 | |
| 	 * Pick up grace-period number for new callbacks.  If this
 | |
| 	 * grace period is already marked as needed, return to the caller.
 | |
| 	 */
 | |
| 	c = rcu_cbs_completed(rdp->rsp, rnp);
 | |
| 	trace_rcu_future_gp(rnp, rdp, c, TPS("Startleaf"));
 | |
| 	if (rnp->need_future_gp[c & 0x1]) {
 | |
| 		trace_rcu_future_gp(rnp, rdp, c, TPS("Prestartleaf"));
 | |
| 		return c;
 | |
| 	}
 | |
| 
 | |
| 	/*
 | |
| 	 * If either this rcu_node structure or the root rcu_node structure
 | |
| 	 * believe that a grace period is in progress, then we must wait
 | |
| 	 * for the one following, which is in "c".  Because our request
 | |
| 	 * will be noticed at the end of the current grace period, we don't
 | |
| 	 * need to explicitly start one.
 | |
| 	 */
 | |
| 	if (rnp->gpnum != rnp->completed ||
 | |
| 	    ACCESS_ONCE(rnp->gpnum) != ACCESS_ONCE(rnp->completed)) {
 | |
| 		rnp->need_future_gp[c & 0x1]++;
 | |
| 		trace_rcu_future_gp(rnp, rdp, c, TPS("Startedleaf"));
 | |
| 		return c;
 | |
| 	}
 | |
| 
 | |
| 	/*
 | |
| 	 * There might be no grace period in progress.  If we don't already
 | |
| 	 * hold it, acquire the root rcu_node structure's lock in order to
 | |
| 	 * start one (if needed).
 | |
| 	 */
 | |
| 	if (rnp != rnp_root) {
 | |
| 		raw_spin_lock(&rnp_root->lock);
 | |
| 		smp_mb__after_unlock_lock();
 | |
| 	}
 | |
| 
 | |
| 	/*
 | |
| 	 * Get a new grace-period number.  If there really is no grace
 | |
| 	 * period in progress, it will be smaller than the one we obtained
 | |
| 	 * earlier.  Adjust callbacks as needed.  Note that even no-CBs
 | |
| 	 * CPUs have a ->nxtcompleted[] array, so no no-CBs checks needed.
 | |
| 	 */
 | |
| 	c = rcu_cbs_completed(rdp->rsp, rnp_root);
 | |
| 	for (i = RCU_DONE_TAIL; i < RCU_NEXT_TAIL; i++)
 | |
| 		if (ULONG_CMP_LT(c, rdp->nxtcompleted[i]))
 | |
| 			rdp->nxtcompleted[i] = c;
 | |
| 
 | |
| 	/*
 | |
| 	 * If the needed for the required grace period is already
 | |
| 	 * recorded, trace and leave.
 | |
| 	 */
 | |
| 	if (rnp_root->need_future_gp[c & 0x1]) {
 | |
| 		trace_rcu_future_gp(rnp, rdp, c, TPS("Prestartedroot"));
 | |
| 		goto unlock_out;
 | |
| 	}
 | |
| 
 | |
| 	/* Record the need for the future grace period. */
 | |
| 	rnp_root->need_future_gp[c & 0x1]++;
 | |
| 
 | |
| 	/* If a grace period is not already in progress, start one. */
 | |
| 	if (rnp_root->gpnum != rnp_root->completed) {
 | |
| 		trace_rcu_future_gp(rnp, rdp, c, TPS("Startedleafroot"));
 | |
| 	} else {
 | |
| 		trace_rcu_future_gp(rnp, rdp, c, TPS("Startedroot"));
 | |
| 		rcu_start_gp_advanced(rdp->rsp, rnp_root, rdp);
 | |
| 	}
 | |
| unlock_out:
 | |
| 	if (rnp != rnp_root)
 | |
| 		raw_spin_unlock(&rnp_root->lock);
 | |
| 	return c;
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * Clean up any old requests for the just-ended grace period.  Also return
 | |
|  * whether any additional grace periods have been requested.  Also invoke
 | |
|  * rcu_nocb_gp_cleanup() in order to wake up any no-callbacks kthreads
 | |
|  * waiting for this grace period to complete.
 | |
|  */
 | |
| static int rcu_future_gp_cleanup(struct rcu_state *rsp, struct rcu_node *rnp)
 | |
| {
 | |
| 	int c = rnp->completed;
 | |
| 	int needmore;
 | |
| 	struct rcu_data *rdp = this_cpu_ptr(rsp->rda);
 | |
| 
 | |
| 	rcu_nocb_gp_cleanup(rsp, rnp);
 | |
| 	rnp->need_future_gp[c & 0x1] = 0;
 | |
| 	needmore = rnp->need_future_gp[(c + 1) & 0x1];
 | |
| 	trace_rcu_future_gp(rnp, rdp, c,
 | |
| 			    needmore ? TPS("CleanupMore") : TPS("Cleanup"));
 | |
| 	return needmore;
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * If there is room, assign a ->completed number to any callbacks on
 | |
|  * this CPU that have not already been assigned.  Also accelerate any
 | |
|  * callbacks that were previously assigned a ->completed number that has
 | |
|  * since proven to be too conservative, which can happen if callbacks get
 | |
|  * assigned a ->completed number while RCU is idle, but with reference to
 | |
|  * a non-root rcu_node structure.  This function is idempotent, so it does
 | |
|  * not hurt to call it repeatedly.
 | |
|  *
 | |
|  * The caller must hold rnp->lock with interrupts disabled.
 | |
|  */
 | |
| static void rcu_accelerate_cbs(struct rcu_state *rsp, struct rcu_node *rnp,
 | |
| 			       struct rcu_data *rdp)
 | |
| {
 | |
| 	unsigned long c;
 | |
| 	int i;
 | |
| 
 | |
| 	/* If the CPU has no callbacks, nothing to do. */
 | |
| 	if (!rdp->nxttail[RCU_NEXT_TAIL] || !*rdp->nxttail[RCU_DONE_TAIL])
 | |
| 		return;
 | |
| 
 | |
| 	/*
 | |
| 	 * Starting from the sublist containing the callbacks most
 | |
| 	 * recently assigned a ->completed number and working down, find the
 | |
| 	 * first sublist that is not assignable to an upcoming grace period.
 | |
| 	 * Such a sublist has something in it (first two tests) and has
 | |
| 	 * a ->completed number assigned that will complete sooner than
 | |
| 	 * the ->completed number for newly arrived callbacks (last test).
 | |
| 	 *
 | |
| 	 * The key point is that any later sublist can be assigned the
 | |
| 	 * same ->completed number as the newly arrived callbacks, which
 | |
| 	 * means that the callbacks in any of these later sublist can be
 | |
| 	 * grouped into a single sublist, whether or not they have already
 | |
| 	 * been assigned a ->completed number.
 | |
| 	 */
 | |
| 	c = rcu_cbs_completed(rsp, rnp);
 | |
| 	for (i = RCU_NEXT_TAIL - 1; i > RCU_DONE_TAIL; i--)
 | |
| 		if (rdp->nxttail[i] != rdp->nxttail[i - 1] &&
 | |
| 		    !ULONG_CMP_GE(rdp->nxtcompleted[i], c))
 | |
| 			break;
 | |
| 
 | |
| 	/*
 | |
| 	 * If there are no sublist for unassigned callbacks, leave.
 | |
| 	 * At the same time, advance "i" one sublist, so that "i" will
 | |
| 	 * index into the sublist where all the remaining callbacks should
 | |
| 	 * be grouped into.
 | |
| 	 */
 | |
| 	if (++i >= RCU_NEXT_TAIL)
 | |
| 		return;
 | |
| 
 | |
| 	/*
 | |
| 	 * Assign all subsequent callbacks' ->completed number to the next
 | |
| 	 * full grace period and group them all in the sublist initially
 | |
| 	 * indexed by "i".
 | |
| 	 */
 | |
| 	for (; i <= RCU_NEXT_TAIL; i++) {
 | |
| 		rdp->nxttail[i] = rdp->nxttail[RCU_NEXT_TAIL];
 | |
| 		rdp->nxtcompleted[i] = c;
 | |
| 	}
 | |
| 	/* Record any needed additional grace periods. */
 | |
| 	rcu_start_future_gp(rnp, rdp);
 | |
| 
 | |
| 	/* Trace depending on how much we were able to accelerate. */
 | |
| 	if (!*rdp->nxttail[RCU_WAIT_TAIL])
 | |
| 		trace_rcu_grace_period(rsp->name, rdp->gpnum, TPS("AccWaitCB"));
 | |
| 	else
 | |
| 		trace_rcu_grace_period(rsp->name, rdp->gpnum, TPS("AccReadyCB"));
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * Move any callbacks whose grace period has completed to the
 | |
|  * RCU_DONE_TAIL sublist, then compact the remaining sublists and
 | |
|  * assign ->completed numbers to any callbacks in the RCU_NEXT_TAIL
 | |
|  * sublist.  This function is idempotent, so it does not hurt to
 | |
|  * invoke it repeatedly.  As long as it is not invoked -too- often...
 | |
|  *
 | |
|  * The caller must hold rnp->lock with interrupts disabled.
 | |
|  */
 | |
| static void rcu_advance_cbs(struct rcu_state *rsp, struct rcu_node *rnp,
 | |
| 			    struct rcu_data *rdp)
 | |
| {
 | |
| 	int i, j;
 | |
| 
 | |
| 	/* If the CPU has no callbacks, nothing to do. */
 | |
| 	if (!rdp->nxttail[RCU_NEXT_TAIL] || !*rdp->nxttail[RCU_DONE_TAIL])
 | |
| 		return;
 | |
| 
 | |
| 	/*
 | |
| 	 * Find all callbacks whose ->completed numbers indicate that they
 | |
| 	 * are ready to invoke, and put them into the RCU_DONE_TAIL sublist.
 | |
| 	 */
 | |
| 	for (i = RCU_WAIT_TAIL; i < RCU_NEXT_TAIL; i++) {
 | |
| 		if (ULONG_CMP_LT(rnp->completed, rdp->nxtcompleted[i]))
 | |
| 			break;
 | |
| 		rdp->nxttail[RCU_DONE_TAIL] = rdp->nxttail[i];
 | |
| 	}
 | |
| 	/* Clean up any sublist tail pointers that were misordered above. */
 | |
| 	for (j = RCU_WAIT_TAIL; j < i; j++)
 | |
| 		rdp->nxttail[j] = rdp->nxttail[RCU_DONE_TAIL];
 | |
| 
 | |
| 	/* Copy down callbacks to fill in empty sublists. */
 | |
| 	for (j = RCU_WAIT_TAIL; i < RCU_NEXT_TAIL; i++, j++) {
 | |
| 		if (rdp->nxttail[j] == rdp->nxttail[RCU_NEXT_TAIL])
 | |
| 			break;
 | |
| 		rdp->nxttail[j] = rdp->nxttail[i];
 | |
| 		rdp->nxtcompleted[j] = rdp->nxtcompleted[i];
 | |
| 	}
 | |
| 
 | |
| 	/* Classify any remaining callbacks. */
 | |
| 	rcu_accelerate_cbs(rsp, rnp, rdp);
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * Update CPU-local rcu_data state to record the beginnings and ends of
 | |
|  * grace periods.  The caller must hold the ->lock of the leaf rcu_node
 | |
|  * structure corresponding to the current CPU, and must have irqs disabled.
 | |
|  */
 | |
| static void __note_gp_changes(struct rcu_state *rsp, struct rcu_node *rnp, struct rcu_data *rdp)
 | |
| {
 | |
| 	/* Handle the ends of any preceding grace periods first. */
 | |
| 	if (rdp->completed == rnp->completed) {
 | |
| 
 | |
| 		/* No grace period end, so just accelerate recent callbacks. */
 | |
| 		rcu_accelerate_cbs(rsp, rnp, rdp);
 | |
| 
 | |
| 	} else {
 | |
| 
 | |
| 		/* Advance callbacks. */
 | |
| 		rcu_advance_cbs(rsp, rnp, rdp);
 | |
| 
 | |
| 		/* Remember that we saw this grace-period completion. */
 | |
| 		rdp->completed = rnp->completed;
 | |
| 		trace_rcu_grace_period(rsp->name, rdp->gpnum, TPS("cpuend"));
 | |
| 	}
 | |
| 
 | |
| 	if (rdp->gpnum != rnp->gpnum) {
 | |
| 		/*
 | |
| 		 * If the current grace period is waiting for this CPU,
 | |
| 		 * set up to detect a quiescent state, otherwise don't
 | |
| 		 * go looking for one.
 | |
| 		 */
 | |
| 		rdp->gpnum = rnp->gpnum;
 | |
| 		trace_rcu_grace_period(rsp->name, rdp->gpnum, TPS("cpustart"));
 | |
| 		rdp->passed_quiesce = 0;
 | |
| 		rdp->qs_pending = !!(rnp->qsmask & rdp->grpmask);
 | |
| 		zero_cpu_stall_ticks(rdp);
 | |
| 	}
 | |
| }
 | |
| 
 | |
| static void note_gp_changes(struct rcu_state *rsp, struct rcu_data *rdp)
 | |
| {
 | |
| 	unsigned long flags;
 | |
| 	struct rcu_node *rnp;
 | |
| 
 | |
| 	local_irq_save(flags);
 | |
| 	rnp = rdp->mynode;
 | |
| 	if ((rdp->gpnum == ACCESS_ONCE(rnp->gpnum) &&
 | |
| 	     rdp->completed == ACCESS_ONCE(rnp->completed)) || /* w/out lock. */
 | |
| 	    !raw_spin_trylock(&rnp->lock)) { /* irqs already off, so later. */
 | |
| 		local_irq_restore(flags);
 | |
| 		return;
 | |
| 	}
 | |
| 	smp_mb__after_unlock_lock();
 | |
| 	__note_gp_changes(rsp, rnp, rdp);
 | |
| 	raw_spin_unlock_irqrestore(&rnp->lock, flags);
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * Initialize a new grace period.  Return 0 if no grace period required.
 | |
|  */
 | |
| static int rcu_gp_init(struct rcu_state *rsp)
 | |
| {
 | |
| 	struct rcu_data *rdp;
 | |
| 	struct rcu_node *rnp = rcu_get_root(rsp);
 | |
| 
 | |
| 	rcu_bind_gp_kthread();
 | |
| 	raw_spin_lock_irq(&rnp->lock);
 | |
| 	smp_mb__after_unlock_lock();
 | |
| 	if (rsp->gp_flags == 0) {
 | |
| 		/* Spurious wakeup, tell caller to go back to sleep.  */
 | |
| 		raw_spin_unlock_irq(&rnp->lock);
 | |
| 		return 0;
 | |
| 	}
 | |
| 	rsp->gp_flags = 0; /* Clear all flags: New grace period. */
 | |
| 
 | |
| 	if (WARN_ON_ONCE(rcu_gp_in_progress(rsp))) {
 | |
| 		/*
 | |
| 		 * Grace period already in progress, don't start another.
 | |
| 		 * Not supposed to be able to happen.
 | |
| 		 */
 | |
| 		raw_spin_unlock_irq(&rnp->lock);
 | |
| 		return 0;
 | |
| 	}
 | |
| 
 | |
| 	/* Advance to a new grace period and initialize state. */
 | |
| 	record_gp_stall_check_time(rsp);
 | |
| 	/* Record GP times before starting GP, hence smp_store_release(). */
 | |
| 	smp_store_release(&rsp->gpnum, rsp->gpnum + 1);
 | |
| 	trace_rcu_grace_period(rsp->name, rsp->gpnum, TPS("start"));
 | |
| 	raw_spin_unlock_irq(&rnp->lock);
 | |
| 
 | |
| 	/* Exclude any concurrent CPU-hotplug operations. */
 | |
| 	mutex_lock(&rsp->onoff_mutex);
 | |
| 	smp_mb__after_unlock_lock(); /* ->gpnum increment before GP! */
 | |
| 
 | |
| 	/*
 | |
| 	 * Set the quiescent-state-needed bits in all the rcu_node
 | |
| 	 * structures for all currently online CPUs in breadth-first order,
 | |
| 	 * starting from the root rcu_node structure, relying on the layout
 | |
| 	 * of the tree within the rsp->node[] array.  Note that other CPUs
 | |
| 	 * will access only the leaves of the hierarchy, thus seeing that no
 | |
| 	 * grace period is in progress, at least until the corresponding
 | |
| 	 * leaf node has been initialized.  In addition, we have excluded
 | |
| 	 * CPU-hotplug operations.
 | |
| 	 *
 | |
| 	 * The grace period cannot complete until the initialization
 | |
| 	 * process finishes, because this kthread handles both.
 | |
| 	 */
 | |
| 	rcu_for_each_node_breadth_first(rsp, rnp) {
 | |
| 		raw_spin_lock_irq(&rnp->lock);
 | |
| 		smp_mb__after_unlock_lock();
 | |
| 		rdp = this_cpu_ptr(rsp->rda);
 | |
| 		rcu_preempt_check_blocked_tasks(rnp);
 | |
| 		rnp->qsmask = rnp->qsmaskinit;
 | |
| 		ACCESS_ONCE(rnp->gpnum) = rsp->gpnum;
 | |
| 		WARN_ON_ONCE(rnp->completed != rsp->completed);
 | |
| 		ACCESS_ONCE(rnp->completed) = rsp->completed;
 | |
| 		if (rnp == rdp->mynode)
 | |
| 			__note_gp_changes(rsp, rnp, rdp);
 | |
| 		rcu_preempt_boost_start_gp(rnp);
 | |
| 		trace_rcu_grace_period_init(rsp->name, rnp->gpnum,
 | |
| 					    rnp->level, rnp->grplo,
 | |
| 					    rnp->grphi, rnp->qsmask);
 | |
| 		raw_spin_unlock_irq(&rnp->lock);
 | |
| #ifdef CONFIG_PROVE_RCU_DELAY
 | |
| 		if ((prandom_u32() % (rcu_num_nodes + 1)) == 0 &&
 | |
| 		    system_state == SYSTEM_RUNNING)
 | |
| 			udelay(200);
 | |
| #endif /* #ifdef CONFIG_PROVE_RCU_DELAY */
 | |
| 		cond_resched();
 | |
| 	}
 | |
| 
 | |
| 	mutex_unlock(&rsp->onoff_mutex);
 | |
| 	return 1;
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * Do one round of quiescent-state forcing.
 | |
|  */
 | |
| static int rcu_gp_fqs(struct rcu_state *rsp, int fqs_state_in)
 | |
| {
 | |
| 	int fqs_state = fqs_state_in;
 | |
| 	bool isidle = false;
 | |
| 	unsigned long maxj;
 | |
| 	struct rcu_node *rnp = rcu_get_root(rsp);
 | |
| 
 | |
| 	rsp->n_force_qs++;
 | |
| 	if (fqs_state == RCU_SAVE_DYNTICK) {
 | |
| 		/* Collect dyntick-idle snapshots. */
 | |
| 		if (is_sysidle_rcu_state(rsp)) {
 | |
| 			isidle = 1;
 | |
| 			maxj = jiffies - ULONG_MAX / 4;
 | |
| 		}
 | |
| 		force_qs_rnp(rsp, dyntick_save_progress_counter,
 | |
| 			     &isidle, &maxj);
 | |
| 		rcu_sysidle_report_gp(rsp, isidle, maxj);
 | |
| 		fqs_state = RCU_FORCE_QS;
 | |
| 	} else {
 | |
| 		/* Handle dyntick-idle and offline CPUs. */
 | |
| 		isidle = 0;
 | |
| 		force_qs_rnp(rsp, rcu_implicit_dynticks_qs, &isidle, &maxj);
 | |
| 	}
 | |
| 	/* Clear flag to prevent immediate re-entry. */
 | |
| 	if (ACCESS_ONCE(rsp->gp_flags) & RCU_GP_FLAG_FQS) {
 | |
| 		raw_spin_lock_irq(&rnp->lock);
 | |
| 		smp_mb__after_unlock_lock();
 | |
| 		rsp->gp_flags &= ~RCU_GP_FLAG_FQS;
 | |
| 		raw_spin_unlock_irq(&rnp->lock);
 | |
| 	}
 | |
| 	return fqs_state;
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * Clean up after the old grace period.
 | |
|  */
 | |
| static void rcu_gp_cleanup(struct rcu_state *rsp)
 | |
| {
 | |
| 	unsigned long gp_duration;
 | |
| 	int nocb = 0;
 | |
| 	struct rcu_data *rdp;
 | |
| 	struct rcu_node *rnp = rcu_get_root(rsp);
 | |
| 
 | |
| 	raw_spin_lock_irq(&rnp->lock);
 | |
| 	smp_mb__after_unlock_lock();
 | |
| 	gp_duration = jiffies - rsp->gp_start;
 | |
| 	if (gp_duration > rsp->gp_max)
 | |
| 		rsp->gp_max = gp_duration;
 | |
| 
 | |
| 	/*
 | |
| 	 * We know the grace period is complete, but to everyone else
 | |
| 	 * it appears to still be ongoing.  But it is also the case
 | |
| 	 * that to everyone else it looks like there is nothing that
 | |
| 	 * they can do to advance the grace period.  It is therefore
 | |
| 	 * safe for us to drop the lock in order to mark the grace
 | |
| 	 * period as completed in all of the rcu_node structures.
 | |
| 	 */
 | |
| 	raw_spin_unlock_irq(&rnp->lock);
 | |
| 
 | |
| 	/*
 | |
| 	 * Propagate new ->completed value to rcu_node structures so
 | |
| 	 * that other CPUs don't have to wait until the start of the next
 | |
| 	 * grace period to process their callbacks.  This also avoids
 | |
| 	 * some nasty RCU grace-period initialization races by forcing
 | |
| 	 * the end of the current grace period to be completely recorded in
 | |
| 	 * all of the rcu_node structures before the beginning of the next
 | |
| 	 * grace period is recorded in any of the rcu_node structures.
 | |
| 	 */
 | |
| 	rcu_for_each_node_breadth_first(rsp, rnp) {
 | |
| 		raw_spin_lock_irq(&rnp->lock);
 | |
| 		smp_mb__after_unlock_lock();
 | |
| 		ACCESS_ONCE(rnp->completed) = rsp->gpnum;
 | |
| 		rdp = this_cpu_ptr(rsp->rda);
 | |
| 		if (rnp == rdp->mynode)
 | |
| 			__note_gp_changes(rsp, rnp, rdp);
 | |
| 		/* smp_mb() provided by prior unlock-lock pair. */
 | |
| 		nocb += rcu_future_gp_cleanup(rsp, rnp);
 | |
| 		raw_spin_unlock_irq(&rnp->lock);
 | |
| 		cond_resched();
 | |
| 	}
 | |
| 	rnp = rcu_get_root(rsp);
 | |
| 	raw_spin_lock_irq(&rnp->lock);
 | |
| 	smp_mb__after_unlock_lock(); /* Order GP before ->completed update. */
 | |
| 	rcu_nocb_gp_set(rnp, nocb);
 | |
| 
 | |
| 	/* Declare grace period done. */
 | |
| 	ACCESS_ONCE(rsp->completed) = rsp->gpnum;
 | |
| 	trace_rcu_grace_period(rsp->name, rsp->completed, TPS("end"));
 | |
| 	rsp->fqs_state = RCU_GP_IDLE;
 | |
| 	rdp = this_cpu_ptr(rsp->rda);
 | |
| 	rcu_advance_cbs(rsp, rnp, rdp);  /* Reduce false positives below. */
 | |
| 	if (cpu_needs_another_gp(rsp, rdp)) {
 | |
| 		rsp->gp_flags = RCU_GP_FLAG_INIT;
 | |
| 		trace_rcu_grace_period(rsp->name,
 | |
| 				       ACCESS_ONCE(rsp->gpnum),
 | |
| 				       TPS("newreq"));
 | |
| 	}
 | |
| 	raw_spin_unlock_irq(&rnp->lock);
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * Body of kthread that handles grace periods.
 | |
|  */
 | |
| static int __noreturn rcu_gp_kthread(void *arg)
 | |
| {
 | |
| 	int fqs_state;
 | |
| 	int gf;
 | |
| 	unsigned long j;
 | |
| 	int ret;
 | |
| 	struct rcu_state *rsp = arg;
 | |
| 	struct rcu_node *rnp = rcu_get_root(rsp);
 | |
| 
 | |
| 	for (;;) {
 | |
| 
 | |
| 		/* Handle grace-period start. */
 | |
| 		for (;;) {
 | |
| 			trace_rcu_grace_period(rsp->name,
 | |
| 					       ACCESS_ONCE(rsp->gpnum),
 | |
| 					       TPS("reqwait"));
 | |
| 			wait_event_interruptible(rsp->gp_wq,
 | |
| 						 ACCESS_ONCE(rsp->gp_flags) &
 | |
| 						 RCU_GP_FLAG_INIT);
 | |
| 			/* Locking provides needed memory barrier. */
 | |
| 			if (rcu_gp_init(rsp))
 | |
| 				break;
 | |
| 			cond_resched();
 | |
| 			flush_signals(current);
 | |
| 			trace_rcu_grace_period(rsp->name,
 | |
| 					       ACCESS_ONCE(rsp->gpnum),
 | |
| 					       TPS("reqwaitsig"));
 | |
| 		}
 | |
| 
 | |
| 		/* Handle quiescent-state forcing. */
 | |
| 		fqs_state = RCU_SAVE_DYNTICK;
 | |
| 		j = jiffies_till_first_fqs;
 | |
| 		if (j > HZ) {
 | |
| 			j = HZ;
 | |
| 			jiffies_till_first_fqs = HZ;
 | |
| 		}
 | |
| 		ret = 0;
 | |
| 		for (;;) {
 | |
| 			if (!ret)
 | |
| 				rsp->jiffies_force_qs = jiffies + j;
 | |
| 			trace_rcu_grace_period(rsp->name,
 | |
| 					       ACCESS_ONCE(rsp->gpnum),
 | |
| 					       TPS("fqswait"));
 | |
| 			ret = wait_event_interruptible_timeout(rsp->gp_wq,
 | |
| 					((gf = ACCESS_ONCE(rsp->gp_flags)) &
 | |
| 					 RCU_GP_FLAG_FQS) ||
 | |
| 					(!ACCESS_ONCE(rnp->qsmask) &&
 | |
| 					 !rcu_preempt_blocked_readers_cgp(rnp)),
 | |
| 					j);
 | |
| 			/* Locking provides needed memory barriers. */
 | |
| 			/* If grace period done, leave loop. */
 | |
| 			if (!ACCESS_ONCE(rnp->qsmask) &&
 | |
| 			    !rcu_preempt_blocked_readers_cgp(rnp))
 | |
| 				break;
 | |
| 			/* If time for quiescent-state forcing, do it. */
 | |
| 			if (ULONG_CMP_GE(jiffies, rsp->jiffies_force_qs) ||
 | |
| 			    (gf & RCU_GP_FLAG_FQS)) {
 | |
| 				trace_rcu_grace_period(rsp->name,
 | |
| 						       ACCESS_ONCE(rsp->gpnum),
 | |
| 						       TPS("fqsstart"));
 | |
| 				fqs_state = rcu_gp_fqs(rsp, fqs_state);
 | |
| 				trace_rcu_grace_period(rsp->name,
 | |
| 						       ACCESS_ONCE(rsp->gpnum),
 | |
| 						       TPS("fqsend"));
 | |
| 				cond_resched();
 | |
| 			} else {
 | |
| 				/* Deal with stray signal. */
 | |
| 				cond_resched();
 | |
| 				flush_signals(current);
 | |
| 				trace_rcu_grace_period(rsp->name,
 | |
| 						       ACCESS_ONCE(rsp->gpnum),
 | |
| 						       TPS("fqswaitsig"));
 | |
| 			}
 | |
| 			j = jiffies_till_next_fqs;
 | |
| 			if (j > HZ) {
 | |
| 				j = HZ;
 | |
| 				jiffies_till_next_fqs = HZ;
 | |
| 			} else if (j < 1) {
 | |
| 				j = 1;
 | |
| 				jiffies_till_next_fqs = 1;
 | |
| 			}
 | |
| 		}
 | |
| 
 | |
| 		/* Handle grace-period end. */
 | |
| 		rcu_gp_cleanup(rsp);
 | |
| 	}
 | |
| }
 | |
| 
 | |
| static void rsp_wakeup(struct irq_work *work)
 | |
| {
 | |
| 	struct rcu_state *rsp = container_of(work, struct rcu_state, wakeup_work);
 | |
| 
 | |
| 	/* Wake up rcu_gp_kthread() to start the grace period. */
 | |
| 	wake_up(&rsp->gp_wq);
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * Start a new RCU grace period if warranted, re-initializing the hierarchy
 | |
|  * in preparation for detecting the next grace period.  The caller must hold
 | |
|  * the root node's ->lock and hard irqs must be disabled.
 | |
|  *
 | |
|  * Note that it is legal for a dying CPU (which is marked as offline) to
 | |
|  * invoke this function.  This can happen when the dying CPU reports its
 | |
|  * quiescent state.
 | |
|  */
 | |
| static void
 | |
| rcu_start_gp_advanced(struct rcu_state *rsp, struct rcu_node *rnp,
 | |
| 		      struct rcu_data *rdp)
 | |
| {
 | |
| 	if (!rsp->gp_kthread || !cpu_needs_another_gp(rsp, rdp)) {
 | |
| 		/*
 | |
| 		 * Either we have not yet spawned the grace-period
 | |
| 		 * task, this CPU does not need another grace period,
 | |
| 		 * or a grace period is already in progress.
 | |
| 		 * Either way, don't start a new grace period.
 | |
| 		 */
 | |
| 		return;
 | |
| 	}
 | |
| 	rsp->gp_flags = RCU_GP_FLAG_INIT;
 | |
| 	trace_rcu_grace_period(rsp->name, ACCESS_ONCE(rsp->gpnum),
 | |
| 			       TPS("newreq"));
 | |
| 
 | |
| 	/*
 | |
| 	 * We can't do wakeups while holding the rnp->lock, as that
 | |
| 	 * could cause possible deadlocks with the rq->lock. Defer
 | |
| 	 * the wakeup to interrupt context.  And don't bother waking
 | |
| 	 * up the running kthread.
 | |
| 	 */
 | |
| 	if (current != rsp->gp_kthread)
 | |
| 		irq_work_queue(&rsp->wakeup_work);
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * Similar to rcu_start_gp_advanced(), but also advance the calling CPU's
 | |
|  * callbacks.  Note that rcu_start_gp_advanced() cannot do this because it
 | |
|  * is invoked indirectly from rcu_advance_cbs(), which would result in
 | |
|  * endless recursion -- or would do so if it wasn't for the self-deadlock
 | |
|  * that is encountered beforehand.
 | |
|  */
 | |
| static void
 | |
| rcu_start_gp(struct rcu_state *rsp)
 | |
| {
 | |
| 	struct rcu_data *rdp = this_cpu_ptr(rsp->rda);
 | |
| 	struct rcu_node *rnp = rcu_get_root(rsp);
 | |
| 
 | |
| 	/*
 | |
| 	 * If there is no grace period in progress right now, any
 | |
| 	 * callbacks we have up to this point will be satisfied by the
 | |
| 	 * next grace period.  Also, advancing the callbacks reduces the
 | |
| 	 * probability of false positives from cpu_needs_another_gp()
 | |
| 	 * resulting in pointless grace periods.  So, advance callbacks
 | |
| 	 * then start the grace period!
 | |
| 	 */
 | |
| 	rcu_advance_cbs(rsp, rnp, rdp);
 | |
| 	rcu_start_gp_advanced(rsp, rnp, rdp);
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * Report a full set of quiescent states to the specified rcu_state
 | |
|  * data structure.  This involves cleaning up after the prior grace
 | |
|  * period and letting rcu_start_gp() start up the next grace period
 | |
|  * if one is needed.  Note that the caller must hold rnp->lock, which
 | |
|  * is released before return.
 | |
|  */
 | |
| static void rcu_report_qs_rsp(struct rcu_state *rsp, unsigned long flags)
 | |
| 	__releases(rcu_get_root(rsp)->lock)
 | |
| {
 | |
| 	WARN_ON_ONCE(!rcu_gp_in_progress(rsp));
 | |
| 	raw_spin_unlock_irqrestore(&rcu_get_root(rsp)->lock, flags);
 | |
| 	wake_up(&rsp->gp_wq);  /* Memory barrier implied by wake_up() path. */
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * Similar to rcu_report_qs_rdp(), for which it is a helper function.
 | |
|  * Allows quiescent states for a group of CPUs to be reported at one go
 | |
|  * to the specified rcu_node structure, though all the CPUs in the group
 | |
|  * must be represented by the same rcu_node structure (which need not be
 | |
|  * a leaf rcu_node structure, though it often will be).  That structure's
 | |
|  * lock must be held upon entry, and it is released before return.
 | |
|  */
 | |
| static void
 | |
| rcu_report_qs_rnp(unsigned long mask, struct rcu_state *rsp,
 | |
| 		  struct rcu_node *rnp, unsigned long flags)
 | |
| 	__releases(rnp->lock)
 | |
| {
 | |
| 	struct rcu_node *rnp_c;
 | |
| 
 | |
| 	/* Walk up the rcu_node hierarchy. */
 | |
| 	for (;;) {
 | |
| 		if (!(rnp->qsmask & mask)) {
 | |
| 
 | |
| 			/* Our bit has already been cleared, so done. */
 | |
| 			raw_spin_unlock_irqrestore(&rnp->lock, flags);
 | |
| 			return;
 | |
| 		}
 | |
| 		rnp->qsmask &= ~mask;
 | |
| 		trace_rcu_quiescent_state_report(rsp->name, rnp->gpnum,
 | |
| 						 mask, rnp->qsmask, rnp->level,
 | |
| 						 rnp->grplo, rnp->grphi,
 | |
| 						 !!rnp->gp_tasks);
 | |
| 		if (rnp->qsmask != 0 || rcu_preempt_blocked_readers_cgp(rnp)) {
 | |
| 
 | |
| 			/* Other bits still set at this level, so done. */
 | |
| 			raw_spin_unlock_irqrestore(&rnp->lock, flags);
 | |
| 			return;
 | |
| 		}
 | |
| 		mask = rnp->grpmask;
 | |
| 		if (rnp->parent == NULL) {
 | |
| 
 | |
| 			/* No more levels.  Exit loop holding root lock. */
 | |
| 
 | |
| 			break;
 | |
| 		}
 | |
| 		raw_spin_unlock_irqrestore(&rnp->lock, flags);
 | |
| 		rnp_c = rnp;
 | |
| 		rnp = rnp->parent;
 | |
| 		raw_spin_lock_irqsave(&rnp->lock, flags);
 | |
| 		smp_mb__after_unlock_lock();
 | |
| 		WARN_ON_ONCE(rnp_c->qsmask);
 | |
| 	}
 | |
| 
 | |
| 	/*
 | |
| 	 * Get here if we are the last CPU to pass through a quiescent
 | |
| 	 * state for this grace period.  Invoke rcu_report_qs_rsp()
 | |
| 	 * to clean up and start the next grace period if one is needed.
 | |
| 	 */
 | |
| 	rcu_report_qs_rsp(rsp, flags); /* releases rnp->lock. */
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * Record a quiescent state for the specified CPU to that CPU's rcu_data
 | |
|  * structure.  This must be either called from the specified CPU, or
 | |
|  * called when the specified CPU is known to be offline (and when it is
 | |
|  * also known that no other CPU is concurrently trying to help the offline
 | |
|  * CPU).  The lastcomp argument is used to make sure we are still in the
 | |
|  * grace period of interest.  We don't want to end the current grace period
 | |
|  * based on quiescent states detected in an earlier grace period!
 | |
|  */
 | |
| static void
 | |
| rcu_report_qs_rdp(int cpu, struct rcu_state *rsp, struct rcu_data *rdp)
 | |
| {
 | |
| 	unsigned long flags;
 | |
| 	unsigned long mask;
 | |
| 	struct rcu_node *rnp;
 | |
| 
 | |
| 	rnp = rdp->mynode;
 | |
| 	raw_spin_lock_irqsave(&rnp->lock, flags);
 | |
| 	smp_mb__after_unlock_lock();
 | |
| 	if (rdp->passed_quiesce == 0 || rdp->gpnum != rnp->gpnum ||
 | |
| 	    rnp->completed == rnp->gpnum) {
 | |
| 
 | |
| 		/*
 | |
| 		 * The grace period in which this quiescent state was
 | |
| 		 * recorded has ended, so don't report it upwards.
 | |
| 		 * We will instead need a new quiescent state that lies
 | |
| 		 * within the current grace period.
 | |
| 		 */
 | |
| 		rdp->passed_quiesce = 0;	/* need qs for new gp. */
 | |
| 		raw_spin_unlock_irqrestore(&rnp->lock, flags);
 | |
| 		return;
 | |
| 	}
 | |
| 	mask = rdp->grpmask;
 | |
| 	if ((rnp->qsmask & mask) == 0) {
 | |
| 		raw_spin_unlock_irqrestore(&rnp->lock, flags);
 | |
| 	} else {
 | |
| 		rdp->qs_pending = 0;
 | |
| 
 | |
| 		/*
 | |
| 		 * This GP can't end until cpu checks in, so all of our
 | |
| 		 * callbacks can be processed during the next GP.
 | |
| 		 */
 | |
| 		rcu_accelerate_cbs(rsp, rnp, rdp);
 | |
| 
 | |
| 		rcu_report_qs_rnp(mask, rsp, rnp, flags); /* rlses rnp->lock */
 | |
| 	}
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * Check to see if there is a new grace period of which this CPU
 | |
|  * is not yet aware, and if so, set up local rcu_data state for it.
 | |
|  * Otherwise, see if this CPU has just passed through its first
 | |
|  * quiescent state for this grace period, and record that fact if so.
 | |
|  */
 | |
| static void
 | |
| rcu_check_quiescent_state(struct rcu_state *rsp, struct rcu_data *rdp)
 | |
| {
 | |
| 	/* Check for grace-period ends and beginnings. */
 | |
| 	note_gp_changes(rsp, rdp);
 | |
| 
 | |
| 	/*
 | |
| 	 * Does this CPU still need to do its part for current grace period?
 | |
| 	 * If no, return and let the other CPUs do their part as well.
 | |
| 	 */
 | |
| 	if (!rdp->qs_pending)
 | |
| 		return;
 | |
| 
 | |
| 	/*
 | |
| 	 * Was there a quiescent state since the beginning of the grace
 | |
| 	 * period? If no, then exit and wait for the next call.
 | |
| 	 */
 | |
| 	if (!rdp->passed_quiesce)
 | |
| 		return;
 | |
| 
 | |
| 	/*
 | |
| 	 * Tell RCU we are done (but rcu_report_qs_rdp() will be the
 | |
| 	 * judge of that).
 | |
| 	 */
 | |
| 	rcu_report_qs_rdp(rdp->cpu, rsp, rdp);
 | |
| }
 | |
| 
 | |
| #ifdef CONFIG_HOTPLUG_CPU
 | |
| 
 | |
| /*
 | |
|  * Send the specified CPU's RCU callbacks to the orphanage.  The
 | |
|  * specified CPU must be offline, and the caller must hold the
 | |
|  * ->orphan_lock.
 | |
|  */
 | |
| static void
 | |
| rcu_send_cbs_to_orphanage(int cpu, struct rcu_state *rsp,
 | |
| 			  struct rcu_node *rnp, struct rcu_data *rdp)
 | |
| {
 | |
| 	/* No-CBs CPUs do not have orphanable callbacks. */
 | |
| 	if (rcu_is_nocb_cpu(rdp->cpu))
 | |
| 		return;
 | |
| 
 | |
| 	/*
 | |
| 	 * Orphan the callbacks.  First adjust the counts.  This is safe
 | |
| 	 * because _rcu_barrier() excludes CPU-hotplug operations, so it
 | |
| 	 * cannot be running now.  Thus no memory barrier is required.
 | |
| 	 */
 | |
| 	if (rdp->nxtlist != NULL) {
 | |
| 		rsp->qlen_lazy += rdp->qlen_lazy;
 | |
| 		rsp->qlen += rdp->qlen;
 | |
| 		rdp->n_cbs_orphaned += rdp->qlen;
 | |
| 		rdp->qlen_lazy = 0;
 | |
| 		ACCESS_ONCE(rdp->qlen) = 0;
 | |
| 	}
 | |
| 
 | |
| 	/*
 | |
| 	 * Next, move those callbacks still needing a grace period to
 | |
| 	 * the orphanage, where some other CPU will pick them up.
 | |
| 	 * Some of the callbacks might have gone partway through a grace
 | |
| 	 * period, but that is too bad.  They get to start over because we
 | |
| 	 * cannot assume that grace periods are synchronized across CPUs.
 | |
| 	 * We don't bother updating the ->nxttail[] array yet, instead
 | |
| 	 * we just reset the whole thing later on.
 | |
| 	 */
 | |
| 	if (*rdp->nxttail[RCU_DONE_TAIL] != NULL) {
 | |
| 		*rsp->orphan_nxttail = *rdp->nxttail[RCU_DONE_TAIL];
 | |
| 		rsp->orphan_nxttail = rdp->nxttail[RCU_NEXT_TAIL];
 | |
| 		*rdp->nxttail[RCU_DONE_TAIL] = NULL;
 | |
| 	}
 | |
| 
 | |
| 	/*
 | |
| 	 * Then move the ready-to-invoke callbacks to the orphanage,
 | |
| 	 * where some other CPU will pick them up.  These will not be
 | |
| 	 * required to pass though another grace period: They are done.
 | |
| 	 */
 | |
| 	if (rdp->nxtlist != NULL) {
 | |
| 		*rsp->orphan_donetail = rdp->nxtlist;
 | |
| 		rsp->orphan_donetail = rdp->nxttail[RCU_DONE_TAIL];
 | |
| 	}
 | |
| 
 | |
| 	/* Finally, initialize the rcu_data structure's list to empty.  */
 | |
| 	init_callback_list(rdp);
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * Adopt the RCU callbacks from the specified rcu_state structure's
 | |
|  * orphanage.  The caller must hold the ->orphan_lock.
 | |
|  */
 | |
| static void rcu_adopt_orphan_cbs(struct rcu_state *rsp, unsigned long flags)
 | |
| {
 | |
| 	int i;
 | |
| 	struct rcu_data *rdp = __this_cpu_ptr(rsp->rda);
 | |
| 
 | |
| 	/* No-CBs CPUs are handled specially. */
 | |
| 	if (rcu_nocb_adopt_orphan_cbs(rsp, rdp, flags))
 | |
| 		return;
 | |
| 
 | |
| 	/* Do the accounting first. */
 | |
| 	rdp->qlen_lazy += rsp->qlen_lazy;
 | |
| 	rdp->qlen += rsp->qlen;
 | |
| 	rdp->n_cbs_adopted += rsp->qlen;
 | |
| 	if (rsp->qlen_lazy != rsp->qlen)
 | |
| 		rcu_idle_count_callbacks_posted();
 | |
| 	rsp->qlen_lazy = 0;
 | |
| 	rsp->qlen = 0;
 | |
| 
 | |
| 	/*
 | |
| 	 * We do not need a memory barrier here because the only way we
 | |
| 	 * can get here if there is an rcu_barrier() in flight is if
 | |
| 	 * we are the task doing the rcu_barrier().
 | |
| 	 */
 | |
| 
 | |
| 	/* First adopt the ready-to-invoke callbacks. */
 | |
| 	if (rsp->orphan_donelist != NULL) {
 | |
| 		*rsp->orphan_donetail = *rdp->nxttail[RCU_DONE_TAIL];
 | |
| 		*rdp->nxttail[RCU_DONE_TAIL] = rsp->orphan_donelist;
 | |
| 		for (i = RCU_NEXT_SIZE - 1; i >= RCU_DONE_TAIL; i--)
 | |
| 			if (rdp->nxttail[i] == rdp->nxttail[RCU_DONE_TAIL])
 | |
| 				rdp->nxttail[i] = rsp->orphan_donetail;
 | |
| 		rsp->orphan_donelist = NULL;
 | |
| 		rsp->orphan_donetail = &rsp->orphan_donelist;
 | |
| 	}
 | |
| 
 | |
| 	/* And then adopt the callbacks that still need a grace period. */
 | |
| 	if (rsp->orphan_nxtlist != NULL) {
 | |
| 		*rdp->nxttail[RCU_NEXT_TAIL] = rsp->orphan_nxtlist;
 | |
| 		rdp->nxttail[RCU_NEXT_TAIL] = rsp->orphan_nxttail;
 | |
| 		rsp->orphan_nxtlist = NULL;
 | |
| 		rsp->orphan_nxttail = &rsp->orphan_nxtlist;
 | |
| 	}
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * Trace the fact that this CPU is going offline.
 | |
|  */
 | |
| static void rcu_cleanup_dying_cpu(struct rcu_state *rsp)
 | |
| {
 | |
| 	RCU_TRACE(unsigned long mask);
 | |
| 	RCU_TRACE(struct rcu_data *rdp = this_cpu_ptr(rsp->rda));
 | |
| 	RCU_TRACE(struct rcu_node *rnp = rdp->mynode);
 | |
| 
 | |
| 	RCU_TRACE(mask = rdp->grpmask);
 | |
| 	trace_rcu_grace_period(rsp->name,
 | |
| 			       rnp->gpnum + 1 - !!(rnp->qsmask & mask),
 | |
| 			       TPS("cpuofl"));
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * The CPU has been completely removed, and some other CPU is reporting
 | |
|  * this fact from process context.  Do the remainder of the cleanup,
 | |
|  * including orphaning the outgoing CPU's RCU callbacks, and also
 | |
|  * adopting them.  There can only be one CPU hotplug operation at a time,
 | |
|  * so no other CPU can be attempting to update rcu_cpu_kthread_task.
 | |
|  */
 | |
| static void rcu_cleanup_dead_cpu(int cpu, struct rcu_state *rsp)
 | |
| {
 | |
| 	unsigned long flags;
 | |
| 	unsigned long mask;
 | |
| 	int need_report = 0;
 | |
| 	struct rcu_data *rdp = per_cpu_ptr(rsp->rda, cpu);
 | |
| 	struct rcu_node *rnp = rdp->mynode;  /* Outgoing CPU's rdp & rnp. */
 | |
| 
 | |
| 	/* Adjust any no-longer-needed kthreads. */
 | |
| 	rcu_boost_kthread_setaffinity(rnp, -1);
 | |
| 
 | |
| 	/* Remove the dead CPU from the bitmasks in the rcu_node hierarchy. */
 | |
| 
 | |
| 	/* Exclude any attempts to start a new grace period. */
 | |
| 	mutex_lock(&rsp->onoff_mutex);
 | |
| 	raw_spin_lock_irqsave(&rsp->orphan_lock, flags);
 | |
| 
 | |
| 	/* Orphan the dead CPU's callbacks, and adopt them if appropriate. */
 | |
| 	rcu_send_cbs_to_orphanage(cpu, rsp, rnp, rdp);
 | |
| 	rcu_adopt_orphan_cbs(rsp, flags);
 | |
| 
 | |
| 	/* Remove the outgoing CPU from the masks in the rcu_node hierarchy. */
 | |
| 	mask = rdp->grpmask;	/* rnp->grplo is constant. */
 | |
| 	do {
 | |
| 		raw_spin_lock(&rnp->lock);	/* irqs already disabled. */
 | |
| 		smp_mb__after_unlock_lock();
 | |
| 		rnp->qsmaskinit &= ~mask;
 | |
| 		if (rnp->qsmaskinit != 0) {
 | |
| 			if (rnp != rdp->mynode)
 | |
| 				raw_spin_unlock(&rnp->lock); /* irqs remain disabled. */
 | |
| 			break;
 | |
| 		}
 | |
| 		if (rnp == rdp->mynode)
 | |
| 			need_report = rcu_preempt_offline_tasks(rsp, rnp, rdp);
 | |
| 		else
 | |
| 			raw_spin_unlock(&rnp->lock); /* irqs remain disabled. */
 | |
| 		mask = rnp->grpmask;
 | |
| 		rnp = rnp->parent;
 | |
| 	} while (rnp != NULL);
 | |
| 
 | |
| 	/*
 | |
| 	 * We still hold the leaf rcu_node structure lock here, and
 | |
| 	 * irqs are still disabled.  The reason for this subterfuge is
 | |
| 	 * because invoking rcu_report_unblock_qs_rnp() with ->orphan_lock
 | |
| 	 * held leads to deadlock.
 | |
| 	 */
 | |
| 	raw_spin_unlock(&rsp->orphan_lock); /* irqs remain disabled. */
 | |
| 	rnp = rdp->mynode;
 | |
| 	if (need_report & RCU_OFL_TASKS_NORM_GP)
 | |
| 		rcu_report_unblock_qs_rnp(rnp, flags);
 | |
| 	else
 | |
| 		raw_spin_unlock_irqrestore(&rnp->lock, flags);
 | |
| 	if (need_report & RCU_OFL_TASKS_EXP_GP)
 | |
| 		rcu_report_exp_rnp(rsp, rnp, true);
 | |
| 	WARN_ONCE(rdp->qlen != 0 || rdp->nxtlist != NULL,
 | |
| 		  "rcu_cleanup_dead_cpu: Callbacks on offline CPU %d: qlen=%lu, nxtlist=%p\n",
 | |
| 		  cpu, rdp->qlen, rdp->nxtlist);
 | |
| 	init_callback_list(rdp);
 | |
| 	/* Disallow further callbacks on this CPU. */
 | |
| 	rdp->nxttail[RCU_NEXT_TAIL] = NULL;
 | |
| 	mutex_unlock(&rsp->onoff_mutex);
 | |
| }
 | |
| 
 | |
| #else /* #ifdef CONFIG_HOTPLUG_CPU */
 | |
| 
 | |
| static void rcu_cleanup_dying_cpu(struct rcu_state *rsp)
 | |
| {
 | |
| }
 | |
| 
 | |
| static void rcu_cleanup_dead_cpu(int cpu, struct rcu_state *rsp)
 | |
| {
 | |
| }
 | |
| 
 | |
| #endif /* #else #ifdef CONFIG_HOTPLUG_CPU */
 | |
| 
 | |
| /*
 | |
|  * Invoke any RCU callbacks that have made it to the end of their grace
 | |
|  * period.  Thottle as specified by rdp->blimit.
 | |
|  */
 | |
| static void rcu_do_batch(struct rcu_state *rsp, struct rcu_data *rdp)
 | |
| {
 | |
| 	unsigned long flags;
 | |
| 	struct rcu_head *next, *list, **tail;
 | |
| 	long bl, count, count_lazy;
 | |
| 	int i;
 | |
| 
 | |
| 	/* If no callbacks are ready, just return. */
 | |
| 	if (!cpu_has_callbacks_ready_to_invoke(rdp)) {
 | |
| 		trace_rcu_batch_start(rsp->name, rdp->qlen_lazy, rdp->qlen, 0);
 | |
| 		trace_rcu_batch_end(rsp->name, 0, !!ACCESS_ONCE(rdp->nxtlist),
 | |
| 				    need_resched(), is_idle_task(current),
 | |
| 				    rcu_is_callbacks_kthread());
 | |
| 		return;
 | |
| 	}
 | |
| 
 | |
| 	/*
 | |
| 	 * Extract the list of ready callbacks, disabling to prevent
 | |
| 	 * races with call_rcu() from interrupt handlers.
 | |
| 	 */
 | |
| 	local_irq_save(flags);
 | |
| 	WARN_ON_ONCE(cpu_is_offline(smp_processor_id()));
 | |
| 	bl = rdp->blimit;
 | |
| 	trace_rcu_batch_start(rsp->name, rdp->qlen_lazy, rdp->qlen, bl);
 | |
| 	list = rdp->nxtlist;
 | |
| 	rdp->nxtlist = *rdp->nxttail[RCU_DONE_TAIL];
 | |
| 	*rdp->nxttail[RCU_DONE_TAIL] = NULL;
 | |
| 	tail = rdp->nxttail[RCU_DONE_TAIL];
 | |
| 	for (i = RCU_NEXT_SIZE - 1; i >= 0; i--)
 | |
| 		if (rdp->nxttail[i] == rdp->nxttail[RCU_DONE_TAIL])
 | |
| 			rdp->nxttail[i] = &rdp->nxtlist;
 | |
| 	local_irq_restore(flags);
 | |
| 
 | |
| 	/* Invoke callbacks. */
 | |
| 	count = count_lazy = 0;
 | |
| 	while (list) {
 | |
| 		next = list->next;
 | |
| 		prefetch(next);
 | |
| 		debug_rcu_head_unqueue(list);
 | |
| 		if (__rcu_reclaim(rsp->name, list))
 | |
| 			count_lazy++;
 | |
| 		list = next;
 | |
| 		/* Stop only if limit reached and CPU has something to do. */
 | |
| 		if (++count >= bl &&
 | |
| 		    (need_resched() ||
 | |
| 		     (!is_idle_task(current) && !rcu_is_callbacks_kthread())))
 | |
| 			break;
 | |
| 	}
 | |
| 
 | |
| 	local_irq_save(flags);
 | |
| 	trace_rcu_batch_end(rsp->name, count, !!list, need_resched(),
 | |
| 			    is_idle_task(current),
 | |
| 			    rcu_is_callbacks_kthread());
 | |
| 
 | |
| 	/* Update count, and requeue any remaining callbacks. */
 | |
| 	if (list != NULL) {
 | |
| 		*tail = rdp->nxtlist;
 | |
| 		rdp->nxtlist = list;
 | |
| 		for (i = 0; i < RCU_NEXT_SIZE; i++)
 | |
| 			if (&rdp->nxtlist == rdp->nxttail[i])
 | |
| 				rdp->nxttail[i] = tail;
 | |
| 			else
 | |
| 				break;
 | |
| 	}
 | |
| 	smp_mb(); /* List handling before counting for rcu_barrier(). */
 | |
| 	rdp->qlen_lazy -= count_lazy;
 | |
| 	ACCESS_ONCE(rdp->qlen) -= count;
 | |
| 	rdp->n_cbs_invoked += count;
 | |
| 
 | |
| 	/* Reinstate batch limit if we have worked down the excess. */
 | |
| 	if (rdp->blimit == LONG_MAX && rdp->qlen <= qlowmark)
 | |
| 		rdp->blimit = blimit;
 | |
| 
 | |
| 	/* Reset ->qlen_last_fqs_check trigger if enough CBs have drained. */
 | |
| 	if (rdp->qlen == 0 && rdp->qlen_last_fqs_check != 0) {
 | |
| 		rdp->qlen_last_fqs_check = 0;
 | |
| 		rdp->n_force_qs_snap = rsp->n_force_qs;
 | |
| 	} else if (rdp->qlen < rdp->qlen_last_fqs_check - qhimark)
 | |
| 		rdp->qlen_last_fqs_check = rdp->qlen;
 | |
| 	WARN_ON_ONCE((rdp->nxtlist == NULL) != (rdp->qlen == 0));
 | |
| 
 | |
| 	local_irq_restore(flags);
 | |
| 
 | |
| 	/* Re-invoke RCU core processing if there are callbacks remaining. */
 | |
| 	if (cpu_has_callbacks_ready_to_invoke(rdp))
 | |
| 		invoke_rcu_core();
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * Check to see if this CPU is in a non-context-switch quiescent state
 | |
|  * (user mode or idle loop for rcu, non-softirq execution for rcu_bh).
 | |
|  * Also schedule RCU core processing.
 | |
|  *
 | |
|  * This function must be called from hardirq context.  It is normally
 | |
|  * invoked from the scheduling-clock interrupt.  If rcu_pending returns
 | |
|  * false, there is no point in invoking rcu_check_callbacks().
 | |
|  */
 | |
| void rcu_check_callbacks(int cpu, int user)
 | |
| {
 | |
| 	trace_rcu_utilization(TPS("Start scheduler-tick"));
 | |
| 	increment_cpu_stall_ticks();
 | |
| 	if (user || rcu_is_cpu_rrupt_from_idle()) {
 | |
| 
 | |
| 		/*
 | |
| 		 * Get here if this CPU took its interrupt from user
 | |
| 		 * mode or from the idle loop, and if this is not a
 | |
| 		 * nested interrupt.  In this case, the CPU is in
 | |
| 		 * a quiescent state, so note it.
 | |
| 		 *
 | |
| 		 * No memory barrier is required here because both
 | |
| 		 * rcu_sched_qs() and rcu_bh_qs() reference only CPU-local
 | |
| 		 * variables that other CPUs neither access nor modify,
 | |
| 		 * at least not while the corresponding CPU is online.
 | |
| 		 */
 | |
| 
 | |
| 		rcu_sched_qs(cpu);
 | |
| 		rcu_bh_qs(cpu);
 | |
| 
 | |
| 	} else if (!in_softirq()) {
 | |
| 
 | |
| 		/*
 | |
| 		 * Get here if this CPU did not take its interrupt from
 | |
| 		 * softirq, in other words, if it is not interrupting
 | |
| 		 * a rcu_bh read-side critical section.  This is an _bh
 | |
| 		 * critical section, so note it.
 | |
| 		 */
 | |
| 
 | |
| 		rcu_bh_qs(cpu);
 | |
| 	}
 | |
| 	rcu_preempt_check_callbacks(cpu);
 | |
| 	if (rcu_pending(cpu))
 | |
| 		invoke_rcu_core();
 | |
| 	trace_rcu_utilization(TPS("End scheduler-tick"));
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * Scan the leaf rcu_node structures, processing dyntick state for any that
 | |
|  * have not yet encountered a quiescent state, using the function specified.
 | |
|  * Also initiate boosting for any threads blocked on the root rcu_node.
 | |
|  *
 | |
|  * The caller must have suppressed start of new grace periods.
 | |
|  */
 | |
| static void force_qs_rnp(struct rcu_state *rsp,
 | |
| 			 int (*f)(struct rcu_data *rsp, bool *isidle,
 | |
| 				  unsigned long *maxj),
 | |
| 			 bool *isidle, unsigned long *maxj)
 | |
| {
 | |
| 	unsigned long bit;
 | |
| 	int cpu;
 | |
| 	unsigned long flags;
 | |
| 	unsigned long mask;
 | |
| 	struct rcu_node *rnp;
 | |
| 
 | |
| 	rcu_for_each_leaf_node(rsp, rnp) {
 | |
| 		cond_resched();
 | |
| 		mask = 0;
 | |
| 		raw_spin_lock_irqsave(&rnp->lock, flags);
 | |
| 		smp_mb__after_unlock_lock();
 | |
| 		if (!rcu_gp_in_progress(rsp)) {
 | |
| 			raw_spin_unlock_irqrestore(&rnp->lock, flags);
 | |
| 			return;
 | |
| 		}
 | |
| 		if (rnp->qsmask == 0) {
 | |
| 			rcu_initiate_boost(rnp, flags); /* releases rnp->lock */
 | |
| 			continue;
 | |
| 		}
 | |
| 		cpu = rnp->grplo;
 | |
| 		bit = 1;
 | |
| 		for (; cpu <= rnp->grphi; cpu++, bit <<= 1) {
 | |
| 			if ((rnp->qsmask & bit) != 0) {
 | |
| 				if ((rnp->qsmaskinit & bit) != 0)
 | |
| 					*isidle = 0;
 | |
| 				if (f(per_cpu_ptr(rsp->rda, cpu), isidle, maxj))
 | |
| 					mask |= bit;
 | |
| 			}
 | |
| 		}
 | |
| 		if (mask != 0) {
 | |
| 
 | |
| 			/* rcu_report_qs_rnp() releases rnp->lock. */
 | |
| 			rcu_report_qs_rnp(mask, rsp, rnp, flags);
 | |
| 			continue;
 | |
| 		}
 | |
| 		raw_spin_unlock_irqrestore(&rnp->lock, flags);
 | |
| 	}
 | |
| 	rnp = rcu_get_root(rsp);
 | |
| 	if (rnp->qsmask == 0) {
 | |
| 		raw_spin_lock_irqsave(&rnp->lock, flags);
 | |
| 		smp_mb__after_unlock_lock();
 | |
| 		rcu_initiate_boost(rnp, flags); /* releases rnp->lock. */
 | |
| 	}
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * Force quiescent states on reluctant CPUs, and also detect which
 | |
|  * CPUs are in dyntick-idle mode.
 | |
|  */
 | |
| static void force_quiescent_state(struct rcu_state *rsp)
 | |
| {
 | |
| 	unsigned long flags;
 | |
| 	bool ret;
 | |
| 	struct rcu_node *rnp;
 | |
| 	struct rcu_node *rnp_old = NULL;
 | |
| 
 | |
| 	/* Funnel through hierarchy to reduce memory contention. */
 | |
| 	rnp = per_cpu_ptr(rsp->rda, raw_smp_processor_id())->mynode;
 | |
| 	for (; rnp != NULL; rnp = rnp->parent) {
 | |
| 		ret = (ACCESS_ONCE(rsp->gp_flags) & RCU_GP_FLAG_FQS) ||
 | |
| 		      !raw_spin_trylock(&rnp->fqslock);
 | |
| 		if (rnp_old != NULL)
 | |
| 			raw_spin_unlock(&rnp_old->fqslock);
 | |
| 		if (ret) {
 | |
| 			ACCESS_ONCE(rsp->n_force_qs_lh)++;
 | |
| 			return;
 | |
| 		}
 | |
| 		rnp_old = rnp;
 | |
| 	}
 | |
| 	/* rnp_old == rcu_get_root(rsp), rnp == NULL. */
 | |
| 
 | |
| 	/* Reached the root of the rcu_node tree, acquire lock. */
 | |
| 	raw_spin_lock_irqsave(&rnp_old->lock, flags);
 | |
| 	smp_mb__after_unlock_lock();
 | |
| 	raw_spin_unlock(&rnp_old->fqslock);
 | |
| 	if (ACCESS_ONCE(rsp->gp_flags) & RCU_GP_FLAG_FQS) {
 | |
| 		ACCESS_ONCE(rsp->n_force_qs_lh)++;
 | |
| 		raw_spin_unlock_irqrestore(&rnp_old->lock, flags);
 | |
| 		return;  /* Someone beat us to it. */
 | |
| 	}
 | |
| 	rsp->gp_flags |= RCU_GP_FLAG_FQS;
 | |
| 	raw_spin_unlock_irqrestore(&rnp_old->lock, flags);
 | |
| 	wake_up(&rsp->gp_wq);  /* Memory barrier implied by wake_up() path. */
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * This does the RCU core processing work for the specified rcu_state
 | |
|  * and rcu_data structures.  This may be called only from the CPU to
 | |
|  * whom the rdp belongs.
 | |
|  */
 | |
| static void
 | |
| __rcu_process_callbacks(struct rcu_state *rsp)
 | |
| {
 | |
| 	unsigned long flags;
 | |
| 	struct rcu_data *rdp = __this_cpu_ptr(rsp->rda);
 | |
| 
 | |
| 	WARN_ON_ONCE(rdp->beenonline == 0);
 | |
| 
 | |
| 	/* Update RCU state based on any recent quiescent states. */
 | |
| 	rcu_check_quiescent_state(rsp, rdp);
 | |
| 
 | |
| 	/* Does this CPU require a not-yet-started grace period? */
 | |
| 	local_irq_save(flags);
 | |
| 	if (cpu_needs_another_gp(rsp, rdp)) {
 | |
| 		raw_spin_lock(&rcu_get_root(rsp)->lock); /* irqs disabled. */
 | |
| 		rcu_start_gp(rsp);
 | |
| 		raw_spin_unlock_irqrestore(&rcu_get_root(rsp)->lock, flags);
 | |
| 	} else {
 | |
| 		local_irq_restore(flags);
 | |
| 	}
 | |
| 
 | |
| 	/* If there are callbacks ready, invoke them. */
 | |
| 	if (cpu_has_callbacks_ready_to_invoke(rdp))
 | |
| 		invoke_rcu_callbacks(rsp, rdp);
 | |
| 
 | |
| 	/* Do any needed deferred wakeups of rcuo kthreads. */
 | |
| 	do_nocb_deferred_wakeup(rdp);
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * Do RCU core processing for the current CPU.
 | |
|  */
 | |
| static void rcu_process_callbacks(struct softirq_action *unused)
 | |
| {
 | |
| 	struct rcu_state *rsp;
 | |
| 
 | |
| 	if (cpu_is_offline(smp_processor_id()))
 | |
| 		return;
 | |
| 	trace_rcu_utilization(TPS("Start RCU core"));
 | |
| 	for_each_rcu_flavor(rsp)
 | |
| 		__rcu_process_callbacks(rsp);
 | |
| 	trace_rcu_utilization(TPS("End RCU core"));
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * Schedule RCU callback invocation.  If the specified type of RCU
 | |
|  * does not support RCU priority boosting, just do a direct call,
 | |
|  * otherwise wake up the per-CPU kernel kthread.  Note that because we
 | |
|  * are running on the current CPU with interrupts disabled, the
 | |
|  * rcu_cpu_kthread_task cannot disappear out from under us.
 | |
|  */
 | |
| static void invoke_rcu_callbacks(struct rcu_state *rsp, struct rcu_data *rdp)
 | |
| {
 | |
| 	if (unlikely(!ACCESS_ONCE(rcu_scheduler_fully_active)))
 | |
| 		return;
 | |
| 	if (likely(!rsp->boost)) {
 | |
| 		rcu_do_batch(rsp, rdp);
 | |
| 		return;
 | |
| 	}
 | |
| 	invoke_rcu_callbacks_kthread();
 | |
| }
 | |
| 
 | |
| static void invoke_rcu_core(void)
 | |
| {
 | |
| 	if (cpu_online(smp_processor_id()))
 | |
| 		raise_softirq(RCU_SOFTIRQ);
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * Handle any core-RCU processing required by a call_rcu() invocation.
 | |
|  */
 | |
| static void __call_rcu_core(struct rcu_state *rsp, struct rcu_data *rdp,
 | |
| 			    struct rcu_head *head, unsigned long flags)
 | |
| {
 | |
| 	/*
 | |
| 	 * If called from an extended quiescent state, invoke the RCU
 | |
| 	 * core in order to force a re-evaluation of RCU's idleness.
 | |
| 	 */
 | |
| 	if (!rcu_is_watching() && cpu_online(smp_processor_id()))
 | |
| 		invoke_rcu_core();
 | |
| 
 | |
| 	/* If interrupts were disabled or CPU offline, don't invoke RCU core. */
 | |
| 	if (irqs_disabled_flags(flags) || cpu_is_offline(smp_processor_id()))
 | |
| 		return;
 | |
| 
 | |
| 	/*
 | |
| 	 * Force the grace period if too many callbacks or too long waiting.
 | |
| 	 * Enforce hysteresis, and don't invoke force_quiescent_state()
 | |
| 	 * if some other CPU has recently done so.  Also, don't bother
 | |
| 	 * invoking force_quiescent_state() if the newly enqueued callback
 | |
| 	 * is the only one waiting for a grace period to complete.
 | |
| 	 */
 | |
| 	if (unlikely(rdp->qlen > rdp->qlen_last_fqs_check + qhimark)) {
 | |
| 
 | |
| 		/* Are we ignoring a completed grace period? */
 | |
| 		note_gp_changes(rsp, rdp);
 | |
| 
 | |
| 		/* Start a new grace period if one not already started. */
 | |
| 		if (!rcu_gp_in_progress(rsp)) {
 | |
| 			struct rcu_node *rnp_root = rcu_get_root(rsp);
 | |
| 
 | |
| 			raw_spin_lock(&rnp_root->lock);
 | |
| 			smp_mb__after_unlock_lock();
 | |
| 			rcu_start_gp(rsp);
 | |
| 			raw_spin_unlock(&rnp_root->lock);
 | |
| 		} else {
 | |
| 			/* Give the grace period a kick. */
 | |
| 			rdp->blimit = LONG_MAX;
 | |
| 			if (rsp->n_force_qs == rdp->n_force_qs_snap &&
 | |
| 			    *rdp->nxttail[RCU_DONE_TAIL] != head)
 | |
| 				force_quiescent_state(rsp);
 | |
| 			rdp->n_force_qs_snap = rsp->n_force_qs;
 | |
| 			rdp->qlen_last_fqs_check = rdp->qlen;
 | |
| 		}
 | |
| 	}
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * RCU callback function to leak a callback.
 | |
|  */
 | |
| static void rcu_leak_callback(struct rcu_head *rhp)
 | |
| {
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * Helper function for call_rcu() and friends.  The cpu argument will
 | |
|  * normally be -1, indicating "currently running CPU".  It may specify
 | |
|  * a CPU only if that CPU is a no-CBs CPU.  Currently, only _rcu_barrier()
 | |
|  * is expected to specify a CPU.
 | |
|  */
 | |
| static void
 | |
| __call_rcu(struct rcu_head *head, void (*func)(struct rcu_head *rcu),
 | |
| 	   struct rcu_state *rsp, int cpu, bool lazy)
 | |
| {
 | |
| 	unsigned long flags;
 | |
| 	struct rcu_data *rdp;
 | |
| 
 | |
| 	WARN_ON_ONCE((unsigned long)head & 0x3); /* Misaligned rcu_head! */
 | |
| 	if (debug_rcu_head_queue(head)) {
 | |
| 		/* Probable double call_rcu(), so leak the callback. */
 | |
| 		ACCESS_ONCE(head->func) = rcu_leak_callback;
 | |
| 		WARN_ONCE(1, "__call_rcu(): Leaked duplicate callback\n");
 | |
| 		return;
 | |
| 	}
 | |
| 	head->func = func;
 | |
| 	head->next = NULL;
 | |
| 
 | |
| 	/*
 | |
| 	 * Opportunistically note grace-period endings and beginnings.
 | |
| 	 * Note that we might see a beginning right after we see an
 | |
| 	 * end, but never vice versa, since this CPU has to pass through
 | |
| 	 * a quiescent state betweentimes.
 | |
| 	 */
 | |
| 	local_irq_save(flags);
 | |
| 	rdp = this_cpu_ptr(rsp->rda);
 | |
| 
 | |
| 	/* Add the callback to our list. */
 | |
| 	if (unlikely(rdp->nxttail[RCU_NEXT_TAIL] == NULL) || cpu != -1) {
 | |
| 		int offline;
 | |
| 
 | |
| 		if (cpu != -1)
 | |
| 			rdp = per_cpu_ptr(rsp->rda, cpu);
 | |
| 		offline = !__call_rcu_nocb(rdp, head, lazy, flags);
 | |
| 		WARN_ON_ONCE(offline);
 | |
| 		/* _call_rcu() is illegal on offline CPU; leak the callback. */
 | |
| 		local_irq_restore(flags);
 | |
| 		return;
 | |
| 	}
 | |
| 	ACCESS_ONCE(rdp->qlen)++;
 | |
| 	if (lazy)
 | |
| 		rdp->qlen_lazy++;
 | |
| 	else
 | |
| 		rcu_idle_count_callbacks_posted();
 | |
| 	smp_mb();  /* Count before adding callback for rcu_barrier(). */
 | |
| 	*rdp->nxttail[RCU_NEXT_TAIL] = head;
 | |
| 	rdp->nxttail[RCU_NEXT_TAIL] = &head->next;
 | |
| 
 | |
| 	if (__is_kfree_rcu_offset((unsigned long)func))
 | |
| 		trace_rcu_kfree_callback(rsp->name, head, (unsigned long)func,
 | |
| 					 rdp->qlen_lazy, rdp->qlen);
 | |
| 	else
 | |
| 		trace_rcu_callback(rsp->name, head, rdp->qlen_lazy, rdp->qlen);
 | |
| 
 | |
| 	/* Go handle any RCU core processing required. */
 | |
| 	__call_rcu_core(rsp, rdp, head, flags);
 | |
| 	local_irq_restore(flags);
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * Queue an RCU-sched callback for invocation after a grace period.
 | |
|  */
 | |
| void call_rcu_sched(struct rcu_head *head, void (*func)(struct rcu_head *rcu))
 | |
| {
 | |
| 	__call_rcu(head, func, &rcu_sched_state, -1, 0);
 | |
| }
 | |
| EXPORT_SYMBOL_GPL(call_rcu_sched);
 | |
| 
 | |
| /*
 | |
|  * Queue an RCU callback for invocation after a quicker grace period.
 | |
|  */
 | |
| void call_rcu_bh(struct rcu_head *head, void (*func)(struct rcu_head *rcu))
 | |
| {
 | |
| 	__call_rcu(head, func, &rcu_bh_state, -1, 0);
 | |
| }
 | |
| EXPORT_SYMBOL_GPL(call_rcu_bh);
 | |
| 
 | |
| /*
 | |
|  * Because a context switch is a grace period for RCU-sched and RCU-bh,
 | |
|  * any blocking grace-period wait automatically implies a grace period
 | |
|  * if there is only one CPU online at any point time during execution
 | |
|  * of either synchronize_sched() or synchronize_rcu_bh().  It is OK to
 | |
|  * occasionally incorrectly indicate that there are multiple CPUs online
 | |
|  * when there was in fact only one the whole time, as this just adds
 | |
|  * some overhead: RCU still operates correctly.
 | |
|  */
 | |
| static inline int rcu_blocking_is_gp(void)
 | |
| {
 | |
| 	int ret;
 | |
| 
 | |
| 	might_sleep();  /* Check for RCU read-side critical section. */
 | |
| 	preempt_disable();
 | |
| 	ret = num_online_cpus() <= 1;
 | |
| 	preempt_enable();
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * synchronize_sched - wait until an rcu-sched grace period has elapsed.
 | |
|  *
 | |
|  * Control will return to the caller some time after a full rcu-sched
 | |
|  * grace period has elapsed, in other words after all currently executing
 | |
|  * rcu-sched read-side critical sections have completed.   These read-side
 | |
|  * critical sections are delimited by rcu_read_lock_sched() and
 | |
|  * rcu_read_unlock_sched(), and may be nested.  Note that preempt_disable(),
 | |
|  * local_irq_disable(), and so on may be used in place of
 | |
|  * rcu_read_lock_sched().
 | |
|  *
 | |
|  * This means that all preempt_disable code sequences, including NMI and
 | |
|  * non-threaded hardware-interrupt handlers, in progress on entry will
 | |
|  * have completed before this primitive returns.  However, this does not
 | |
|  * guarantee that softirq handlers will have completed, since in some
 | |
|  * kernels, these handlers can run in process context, and can block.
 | |
|  *
 | |
|  * Note that this guarantee implies further memory-ordering guarantees.
 | |
|  * On systems with more than one CPU, when synchronize_sched() returns,
 | |
|  * each CPU is guaranteed to have executed a full memory barrier since the
 | |
|  * end of its last RCU-sched read-side critical section whose beginning
 | |
|  * preceded the call to synchronize_sched().  In addition, each CPU having
 | |
|  * an RCU read-side critical section that extends beyond the return from
 | |
|  * synchronize_sched() is guaranteed to have executed a full memory barrier
 | |
|  * after the beginning of synchronize_sched() and before the beginning of
 | |
|  * that RCU read-side critical section.  Note that these guarantees include
 | |
|  * CPUs that are offline, idle, or executing in user mode, as well as CPUs
 | |
|  * that are executing in the kernel.
 | |
|  *
 | |
|  * Furthermore, if CPU A invoked synchronize_sched(), which returned
 | |
|  * to its caller on CPU B, then both CPU A and CPU B are guaranteed
 | |
|  * to have executed a full memory barrier during the execution of
 | |
|  * synchronize_sched() -- even if CPU A and CPU B are the same CPU (but
 | |
|  * again only if the system has more than one CPU).
 | |
|  *
 | |
|  * This primitive provides the guarantees made by the (now removed)
 | |
|  * synchronize_kernel() API.  In contrast, synchronize_rcu() only
 | |
|  * guarantees that rcu_read_lock() sections will have completed.
 | |
|  * In "classic RCU", these two guarantees happen to be one and
 | |
|  * the same, but can differ in realtime RCU implementations.
 | |
|  */
 | |
| void synchronize_sched(void)
 | |
| {
 | |
| 	rcu_lockdep_assert(!lock_is_held(&rcu_bh_lock_map) &&
 | |
| 			   !lock_is_held(&rcu_lock_map) &&
 | |
| 			   !lock_is_held(&rcu_sched_lock_map),
 | |
| 			   "Illegal synchronize_sched() in RCU-sched read-side critical section");
 | |
| 	if (rcu_blocking_is_gp())
 | |
| 		return;
 | |
| 	if (rcu_expedited)
 | |
| 		synchronize_sched_expedited();
 | |
| 	else
 | |
| 		wait_rcu_gp(call_rcu_sched);
 | |
| }
 | |
| EXPORT_SYMBOL_GPL(synchronize_sched);
 | |
| 
 | |
| /**
 | |
|  * synchronize_rcu_bh - wait until an rcu_bh grace period has elapsed.
 | |
|  *
 | |
|  * Control will return to the caller some time after a full rcu_bh grace
 | |
|  * period has elapsed, in other words after all currently executing rcu_bh
 | |
|  * read-side critical sections have completed.  RCU read-side critical
 | |
|  * sections are delimited by rcu_read_lock_bh() and rcu_read_unlock_bh(),
 | |
|  * and may be nested.
 | |
|  *
 | |
|  * See the description of synchronize_sched() for more detailed information
 | |
|  * on memory ordering guarantees.
 | |
|  */
 | |
| void synchronize_rcu_bh(void)
 | |
| {
 | |
| 	rcu_lockdep_assert(!lock_is_held(&rcu_bh_lock_map) &&
 | |
| 			   !lock_is_held(&rcu_lock_map) &&
 | |
| 			   !lock_is_held(&rcu_sched_lock_map),
 | |
| 			   "Illegal synchronize_rcu_bh() in RCU-bh read-side critical section");
 | |
| 	if (rcu_blocking_is_gp())
 | |
| 		return;
 | |
| 	if (rcu_expedited)
 | |
| 		synchronize_rcu_bh_expedited();
 | |
| 	else
 | |
| 		wait_rcu_gp(call_rcu_bh);
 | |
| }
 | |
| EXPORT_SYMBOL_GPL(synchronize_rcu_bh);
 | |
| 
 | |
| /**
 | |
|  * get_state_synchronize_rcu - Snapshot current RCU state
 | |
|  *
 | |
|  * Returns a cookie that is used by a later call to cond_synchronize_rcu()
 | |
|  * to determine whether or not a full grace period has elapsed in the
 | |
|  * meantime.
 | |
|  */
 | |
| unsigned long get_state_synchronize_rcu(void)
 | |
| {
 | |
| 	/*
 | |
| 	 * Any prior manipulation of RCU-protected data must happen
 | |
| 	 * before the load from ->gpnum.
 | |
| 	 */
 | |
| 	smp_mb();  /* ^^^ */
 | |
| 
 | |
| 	/*
 | |
| 	 * Make sure this load happens before the purportedly
 | |
| 	 * time-consuming work between get_state_synchronize_rcu()
 | |
| 	 * and cond_synchronize_rcu().
 | |
| 	 */
 | |
| 	return smp_load_acquire(&rcu_state->gpnum);
 | |
| }
 | |
| EXPORT_SYMBOL_GPL(get_state_synchronize_rcu);
 | |
| 
 | |
| /**
 | |
|  * cond_synchronize_rcu - Conditionally wait for an RCU grace period
 | |
|  *
 | |
|  * @oldstate: return value from earlier call to get_state_synchronize_rcu()
 | |
|  *
 | |
|  * If a full RCU grace period has elapsed since the earlier call to
 | |
|  * get_state_synchronize_rcu(), just return.  Otherwise, invoke
 | |
|  * synchronize_rcu() to wait for a full grace period.
 | |
|  *
 | |
|  * Yes, this function does not take counter wrap into account.  But
 | |
|  * counter wrap is harmless.  If the counter wraps, we have waited for
 | |
|  * more than 2 billion grace periods (and way more on a 64-bit system!),
 | |
|  * so waiting for one additional grace period should be just fine.
 | |
|  */
 | |
| void cond_synchronize_rcu(unsigned long oldstate)
 | |
| {
 | |
| 	unsigned long newstate;
 | |
| 
 | |
| 	/*
 | |
| 	 * Ensure that this load happens before any RCU-destructive
 | |
| 	 * actions the caller might carry out after we return.
 | |
| 	 */
 | |
| 	newstate = smp_load_acquire(&rcu_state->completed);
 | |
| 	if (ULONG_CMP_GE(oldstate, newstate))
 | |
| 		synchronize_rcu();
 | |
| }
 | |
| EXPORT_SYMBOL_GPL(cond_synchronize_rcu);
 | |
| 
 | |
| static int synchronize_sched_expedited_cpu_stop(void *data)
 | |
| {
 | |
| 	/*
 | |
| 	 * There must be a full memory barrier on each affected CPU
 | |
| 	 * between the time that try_stop_cpus() is called and the
 | |
| 	 * time that it returns.
 | |
| 	 *
 | |
| 	 * In the current initial implementation of cpu_stop, the
 | |
| 	 * above condition is already met when the control reaches
 | |
| 	 * this point and the following smp_mb() is not strictly
 | |
| 	 * necessary.  Do smp_mb() anyway for documentation and
 | |
| 	 * robustness against future implementation changes.
 | |
| 	 */
 | |
| 	smp_mb(); /* See above comment block. */
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * synchronize_sched_expedited - Brute-force RCU-sched grace period
 | |
|  *
 | |
|  * Wait for an RCU-sched grace period to elapse, but use a "big hammer"
 | |
|  * approach to force the grace period to end quickly.  This consumes
 | |
|  * significant time on all CPUs and is unfriendly to real-time workloads,
 | |
|  * so is thus not recommended for any sort of common-case code.  In fact,
 | |
|  * if you are using synchronize_sched_expedited() in a loop, please
 | |
|  * restructure your code to batch your updates, and then use a single
 | |
|  * synchronize_sched() instead.
 | |
|  *
 | |
|  * Note that it is illegal to call this function while holding any lock
 | |
|  * that is acquired by a CPU-hotplug notifier.  And yes, it is also illegal
 | |
|  * to call this function from a CPU-hotplug notifier.  Failing to observe
 | |
|  * these restriction will result in deadlock.
 | |
|  *
 | |
|  * This implementation can be thought of as an application of ticket
 | |
|  * locking to RCU, with sync_sched_expedited_started and
 | |
|  * sync_sched_expedited_done taking on the roles of the halves
 | |
|  * of the ticket-lock word.  Each task atomically increments
 | |
|  * sync_sched_expedited_started upon entry, snapshotting the old value,
 | |
|  * then attempts to stop all the CPUs.  If this succeeds, then each
 | |
|  * CPU will have executed a context switch, resulting in an RCU-sched
 | |
|  * grace period.  We are then done, so we use atomic_cmpxchg() to
 | |
|  * update sync_sched_expedited_done to match our snapshot -- but
 | |
|  * only if someone else has not already advanced past our snapshot.
 | |
|  *
 | |
|  * On the other hand, if try_stop_cpus() fails, we check the value
 | |
|  * of sync_sched_expedited_done.  If it has advanced past our
 | |
|  * initial snapshot, then someone else must have forced a grace period
 | |
|  * some time after we took our snapshot.  In this case, our work is
 | |
|  * done for us, and we can simply return.  Otherwise, we try again,
 | |
|  * but keep our initial snapshot for purposes of checking for someone
 | |
|  * doing our work for us.
 | |
|  *
 | |
|  * If we fail too many times in a row, we fall back to synchronize_sched().
 | |
|  */
 | |
| void synchronize_sched_expedited(void)
 | |
| {
 | |
| 	long firstsnap, s, snap;
 | |
| 	int trycount = 0;
 | |
| 	struct rcu_state *rsp = &rcu_sched_state;
 | |
| 
 | |
| 	/*
 | |
| 	 * If we are in danger of counter wrap, just do synchronize_sched().
 | |
| 	 * By allowing sync_sched_expedited_started to advance no more than
 | |
| 	 * ULONG_MAX/8 ahead of sync_sched_expedited_done, we are ensuring
 | |
| 	 * that more than 3.5 billion CPUs would be required to force a
 | |
| 	 * counter wrap on a 32-bit system.  Quite a few more CPUs would of
 | |
| 	 * course be required on a 64-bit system.
 | |
| 	 */
 | |
| 	if (ULONG_CMP_GE((ulong)atomic_long_read(&rsp->expedited_start),
 | |
| 			 (ulong)atomic_long_read(&rsp->expedited_done) +
 | |
| 			 ULONG_MAX / 8)) {
 | |
| 		synchronize_sched();
 | |
| 		atomic_long_inc(&rsp->expedited_wrap);
 | |
| 		return;
 | |
| 	}
 | |
| 
 | |
| 	/*
 | |
| 	 * Take a ticket.  Note that atomic_inc_return() implies a
 | |
| 	 * full memory barrier.
 | |
| 	 */
 | |
| 	snap = atomic_long_inc_return(&rsp->expedited_start);
 | |
| 	firstsnap = snap;
 | |
| 	get_online_cpus();
 | |
| 	WARN_ON_ONCE(cpu_is_offline(raw_smp_processor_id()));
 | |
| 
 | |
| 	/*
 | |
| 	 * Each pass through the following loop attempts to force a
 | |
| 	 * context switch on each CPU.
 | |
| 	 */
 | |
| 	while (try_stop_cpus(cpu_online_mask,
 | |
| 			     synchronize_sched_expedited_cpu_stop,
 | |
| 			     NULL) == -EAGAIN) {
 | |
| 		put_online_cpus();
 | |
| 		atomic_long_inc(&rsp->expedited_tryfail);
 | |
| 
 | |
| 		/* Check to see if someone else did our work for us. */
 | |
| 		s = atomic_long_read(&rsp->expedited_done);
 | |
| 		if (ULONG_CMP_GE((ulong)s, (ulong)firstsnap)) {
 | |
| 			/* ensure test happens before caller kfree */
 | |
| 			smp_mb__before_atomic_inc(); /* ^^^ */
 | |
| 			atomic_long_inc(&rsp->expedited_workdone1);
 | |
| 			return;
 | |
| 		}
 | |
| 
 | |
| 		/* No joy, try again later.  Or just synchronize_sched(). */
 | |
| 		if (trycount++ < 10) {
 | |
| 			udelay(trycount * num_online_cpus());
 | |
| 		} else {
 | |
| 			wait_rcu_gp(call_rcu_sched);
 | |
| 			atomic_long_inc(&rsp->expedited_normal);
 | |
| 			return;
 | |
| 		}
 | |
| 
 | |
| 		/* Recheck to see if someone else did our work for us. */
 | |
| 		s = atomic_long_read(&rsp->expedited_done);
 | |
| 		if (ULONG_CMP_GE((ulong)s, (ulong)firstsnap)) {
 | |
| 			/* ensure test happens before caller kfree */
 | |
| 			smp_mb__before_atomic_inc(); /* ^^^ */
 | |
| 			atomic_long_inc(&rsp->expedited_workdone2);
 | |
| 			return;
 | |
| 		}
 | |
| 
 | |
| 		/*
 | |
| 		 * Refetching sync_sched_expedited_started allows later
 | |
| 		 * callers to piggyback on our grace period.  We retry
 | |
| 		 * after they started, so our grace period works for them,
 | |
| 		 * and they started after our first try, so their grace
 | |
| 		 * period works for us.
 | |
| 		 */
 | |
| 		get_online_cpus();
 | |
| 		snap = atomic_long_read(&rsp->expedited_start);
 | |
| 		smp_mb(); /* ensure read is before try_stop_cpus(). */
 | |
| 	}
 | |
| 	atomic_long_inc(&rsp->expedited_stoppedcpus);
 | |
| 
 | |
| 	/*
 | |
| 	 * Everyone up to our most recent fetch is covered by our grace
 | |
| 	 * period.  Update the counter, but only if our work is still
 | |
| 	 * relevant -- which it won't be if someone who started later
 | |
| 	 * than we did already did their update.
 | |
| 	 */
 | |
| 	do {
 | |
| 		atomic_long_inc(&rsp->expedited_done_tries);
 | |
| 		s = atomic_long_read(&rsp->expedited_done);
 | |
| 		if (ULONG_CMP_GE((ulong)s, (ulong)snap)) {
 | |
| 			/* ensure test happens before caller kfree */
 | |
| 			smp_mb__before_atomic_inc(); /* ^^^ */
 | |
| 			atomic_long_inc(&rsp->expedited_done_lost);
 | |
| 			break;
 | |
| 		}
 | |
| 	} while (atomic_long_cmpxchg(&rsp->expedited_done, s, snap) != s);
 | |
| 	atomic_long_inc(&rsp->expedited_done_exit);
 | |
| 
 | |
| 	put_online_cpus();
 | |
| }
 | |
| EXPORT_SYMBOL_GPL(synchronize_sched_expedited);
 | |
| 
 | |
| /*
 | |
|  * Check to see if there is any immediate RCU-related work to be done
 | |
|  * by the current CPU, for the specified type of RCU, returning 1 if so.
 | |
|  * The checks are in order of increasing expense: checks that can be
 | |
|  * carried out against CPU-local state are performed first.  However,
 | |
|  * we must check for CPU stalls first, else we might not get a chance.
 | |
|  */
 | |
| static int __rcu_pending(struct rcu_state *rsp, struct rcu_data *rdp)
 | |
| {
 | |
| 	struct rcu_node *rnp = rdp->mynode;
 | |
| 
 | |
| 	rdp->n_rcu_pending++;
 | |
| 
 | |
| 	/* Check for CPU stalls, if enabled. */
 | |
| 	check_cpu_stall(rsp, rdp);
 | |
| 
 | |
| 	/* Is this CPU a NO_HZ_FULL CPU that should ignore RCU? */
 | |
| 	if (rcu_nohz_full_cpu(rsp))
 | |
| 		return 0;
 | |
| 
 | |
| 	/* Is the RCU core waiting for a quiescent state from this CPU? */
 | |
| 	if (rcu_scheduler_fully_active &&
 | |
| 	    rdp->qs_pending && !rdp->passed_quiesce) {
 | |
| 		rdp->n_rp_qs_pending++;
 | |
| 	} else if (rdp->qs_pending && rdp->passed_quiesce) {
 | |
| 		rdp->n_rp_report_qs++;
 | |
| 		return 1;
 | |
| 	}
 | |
| 
 | |
| 	/* Does this CPU have callbacks ready to invoke? */
 | |
| 	if (cpu_has_callbacks_ready_to_invoke(rdp)) {
 | |
| 		rdp->n_rp_cb_ready++;
 | |
| 		return 1;
 | |
| 	}
 | |
| 
 | |
| 	/* Has RCU gone idle with this CPU needing another grace period? */
 | |
| 	if (cpu_needs_another_gp(rsp, rdp)) {
 | |
| 		rdp->n_rp_cpu_needs_gp++;
 | |
| 		return 1;
 | |
| 	}
 | |
| 
 | |
| 	/* Has another RCU grace period completed?  */
 | |
| 	if (ACCESS_ONCE(rnp->completed) != rdp->completed) { /* outside lock */
 | |
| 		rdp->n_rp_gp_completed++;
 | |
| 		return 1;
 | |
| 	}
 | |
| 
 | |
| 	/* Has a new RCU grace period started? */
 | |
| 	if (ACCESS_ONCE(rnp->gpnum) != rdp->gpnum) { /* outside lock */
 | |
| 		rdp->n_rp_gp_started++;
 | |
| 		return 1;
 | |
| 	}
 | |
| 
 | |
| 	/* Does this CPU need a deferred NOCB wakeup? */
 | |
| 	if (rcu_nocb_need_deferred_wakeup(rdp)) {
 | |
| 		rdp->n_rp_nocb_defer_wakeup++;
 | |
| 		return 1;
 | |
| 	}
 | |
| 
 | |
| 	/* nothing to do */
 | |
| 	rdp->n_rp_need_nothing++;
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * Check to see if there is any immediate RCU-related work to be done
 | |
|  * by the current CPU, returning 1 if so.  This function is part of the
 | |
|  * RCU implementation; it is -not- an exported member of the RCU API.
 | |
|  */
 | |
| static int rcu_pending(int cpu)
 | |
| {
 | |
| 	struct rcu_state *rsp;
 | |
| 
 | |
| 	for_each_rcu_flavor(rsp)
 | |
| 		if (__rcu_pending(rsp, per_cpu_ptr(rsp->rda, cpu)))
 | |
| 			return 1;
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * Return true if the specified CPU has any callback.  If all_lazy is
 | |
|  * non-NULL, store an indication of whether all callbacks are lazy.
 | |
|  * (If there are no callbacks, all of them are deemed to be lazy.)
 | |
|  */
 | |
| static int __maybe_unused rcu_cpu_has_callbacks(int cpu, bool *all_lazy)
 | |
| {
 | |
| 	bool al = true;
 | |
| 	bool hc = false;
 | |
| 	struct rcu_data *rdp;
 | |
| 	struct rcu_state *rsp;
 | |
| 
 | |
| 	for_each_rcu_flavor(rsp) {
 | |
| 		rdp = per_cpu_ptr(rsp->rda, cpu);
 | |
| 		if (!rdp->nxtlist)
 | |
| 			continue;
 | |
| 		hc = true;
 | |
| 		if (rdp->qlen != rdp->qlen_lazy || !all_lazy) {
 | |
| 			al = false;
 | |
| 			break;
 | |
| 		}
 | |
| 	}
 | |
| 	if (all_lazy)
 | |
| 		*all_lazy = al;
 | |
| 	return hc;
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * Helper function for _rcu_barrier() tracing.  If tracing is disabled,
 | |
|  * the compiler is expected to optimize this away.
 | |
|  */
 | |
| static void _rcu_barrier_trace(struct rcu_state *rsp, const char *s,
 | |
| 			       int cpu, unsigned long done)
 | |
| {
 | |
| 	trace_rcu_barrier(rsp->name, s, cpu,
 | |
| 			  atomic_read(&rsp->barrier_cpu_count), done);
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * RCU callback function for _rcu_barrier().  If we are last, wake
 | |
|  * up the task executing _rcu_barrier().
 | |
|  */
 | |
| static void rcu_barrier_callback(struct rcu_head *rhp)
 | |
| {
 | |
| 	struct rcu_data *rdp = container_of(rhp, struct rcu_data, barrier_head);
 | |
| 	struct rcu_state *rsp = rdp->rsp;
 | |
| 
 | |
| 	if (atomic_dec_and_test(&rsp->barrier_cpu_count)) {
 | |
| 		_rcu_barrier_trace(rsp, "LastCB", -1, rsp->n_barrier_done);
 | |
| 		complete(&rsp->barrier_completion);
 | |
| 	} else {
 | |
| 		_rcu_barrier_trace(rsp, "CB", -1, rsp->n_barrier_done);
 | |
| 	}
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * Called with preemption disabled, and from cross-cpu IRQ context.
 | |
|  */
 | |
| static void rcu_barrier_func(void *type)
 | |
| {
 | |
| 	struct rcu_state *rsp = type;
 | |
| 	struct rcu_data *rdp = __this_cpu_ptr(rsp->rda);
 | |
| 
 | |
| 	_rcu_barrier_trace(rsp, "IRQ", -1, rsp->n_barrier_done);
 | |
| 	atomic_inc(&rsp->barrier_cpu_count);
 | |
| 	rsp->call(&rdp->barrier_head, rcu_barrier_callback);
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * Orchestrate the specified type of RCU barrier, waiting for all
 | |
|  * RCU callbacks of the specified type to complete.
 | |
|  */
 | |
| static void _rcu_barrier(struct rcu_state *rsp)
 | |
| {
 | |
| 	int cpu;
 | |
| 	struct rcu_data *rdp;
 | |
| 	unsigned long snap = ACCESS_ONCE(rsp->n_barrier_done);
 | |
| 	unsigned long snap_done;
 | |
| 
 | |
| 	_rcu_barrier_trace(rsp, "Begin", -1, snap);
 | |
| 
 | |
| 	/* Take mutex to serialize concurrent rcu_barrier() requests. */
 | |
| 	mutex_lock(&rsp->barrier_mutex);
 | |
| 
 | |
| 	/*
 | |
| 	 * Ensure that all prior references, including to ->n_barrier_done,
 | |
| 	 * are ordered before the _rcu_barrier() machinery.
 | |
| 	 */
 | |
| 	smp_mb();  /* See above block comment. */
 | |
| 
 | |
| 	/*
 | |
| 	 * Recheck ->n_barrier_done to see if others did our work for us.
 | |
| 	 * This means checking ->n_barrier_done for an even-to-odd-to-even
 | |
| 	 * transition.  The "if" expression below therefore rounds the old
 | |
| 	 * value up to the next even number and adds two before comparing.
 | |
| 	 */
 | |
| 	snap_done = rsp->n_barrier_done;
 | |
| 	_rcu_barrier_trace(rsp, "Check", -1, snap_done);
 | |
| 
 | |
| 	/*
 | |
| 	 * If the value in snap is odd, we needed to wait for the current
 | |
| 	 * rcu_barrier() to complete, then wait for the next one, in other
 | |
| 	 * words, we need the value of snap_done to be three larger than
 | |
| 	 * the value of snap.  On the other hand, if the value in snap is
 | |
| 	 * even, we only had to wait for the next rcu_barrier() to complete,
 | |
| 	 * in other words, we need the value of snap_done to be only two
 | |
| 	 * greater than the value of snap.  The "(snap + 3) & ~0x1" computes
 | |
| 	 * this for us (thank you, Linus!).
 | |
| 	 */
 | |
| 	if (ULONG_CMP_GE(snap_done, (snap + 3) & ~0x1)) {
 | |
| 		_rcu_barrier_trace(rsp, "EarlyExit", -1, snap_done);
 | |
| 		smp_mb(); /* caller's subsequent code after above check. */
 | |
| 		mutex_unlock(&rsp->barrier_mutex);
 | |
| 		return;
 | |
| 	}
 | |
| 
 | |
| 	/*
 | |
| 	 * Increment ->n_barrier_done to avoid duplicate work.  Use
 | |
| 	 * ACCESS_ONCE() to prevent the compiler from speculating
 | |
| 	 * the increment to precede the early-exit check.
 | |
| 	 */
 | |
| 	ACCESS_ONCE(rsp->n_barrier_done)++;
 | |
| 	WARN_ON_ONCE((rsp->n_barrier_done & 0x1) != 1);
 | |
| 	_rcu_barrier_trace(rsp, "Inc1", -1, rsp->n_barrier_done);
 | |
| 	smp_mb(); /* Order ->n_barrier_done increment with below mechanism. */
 | |
| 
 | |
| 	/*
 | |
| 	 * Initialize the count to one rather than to zero in order to
 | |
| 	 * avoid a too-soon return to zero in case of a short grace period
 | |
| 	 * (or preemption of this task).  Exclude CPU-hotplug operations
 | |
| 	 * to ensure that no offline CPU has callbacks queued.
 | |
| 	 */
 | |
| 	init_completion(&rsp->barrier_completion);
 | |
| 	atomic_set(&rsp->barrier_cpu_count, 1);
 | |
| 	get_online_cpus();
 | |
| 
 | |
| 	/*
 | |
| 	 * Force each CPU with callbacks to register a new callback.
 | |
| 	 * When that callback is invoked, we will know that all of the
 | |
| 	 * corresponding CPU's preceding callbacks have been invoked.
 | |
| 	 */
 | |
| 	for_each_possible_cpu(cpu) {
 | |
| 		if (!cpu_online(cpu) && !rcu_is_nocb_cpu(cpu))
 | |
| 			continue;
 | |
| 		rdp = per_cpu_ptr(rsp->rda, cpu);
 | |
| 		if (rcu_is_nocb_cpu(cpu)) {
 | |
| 			_rcu_barrier_trace(rsp, "OnlineNoCB", cpu,
 | |
| 					   rsp->n_barrier_done);
 | |
| 			atomic_inc(&rsp->barrier_cpu_count);
 | |
| 			__call_rcu(&rdp->barrier_head, rcu_barrier_callback,
 | |
| 				   rsp, cpu, 0);
 | |
| 		} else if (ACCESS_ONCE(rdp->qlen)) {
 | |
| 			_rcu_barrier_trace(rsp, "OnlineQ", cpu,
 | |
| 					   rsp->n_barrier_done);
 | |
| 			smp_call_function_single(cpu, rcu_barrier_func, rsp, 1);
 | |
| 		} else {
 | |
| 			_rcu_barrier_trace(rsp, "OnlineNQ", cpu,
 | |
| 					   rsp->n_barrier_done);
 | |
| 		}
 | |
| 	}
 | |
| 	put_online_cpus();
 | |
| 
 | |
| 	/*
 | |
| 	 * Now that we have an rcu_barrier_callback() callback on each
 | |
| 	 * CPU, and thus each counted, remove the initial count.
 | |
| 	 */
 | |
| 	if (atomic_dec_and_test(&rsp->barrier_cpu_count))
 | |
| 		complete(&rsp->barrier_completion);
 | |
| 
 | |
| 	/* Increment ->n_barrier_done to prevent duplicate work. */
 | |
| 	smp_mb(); /* Keep increment after above mechanism. */
 | |
| 	ACCESS_ONCE(rsp->n_barrier_done)++;
 | |
| 	WARN_ON_ONCE((rsp->n_barrier_done & 0x1) != 0);
 | |
| 	_rcu_barrier_trace(rsp, "Inc2", -1, rsp->n_barrier_done);
 | |
| 	smp_mb(); /* Keep increment before caller's subsequent code. */
 | |
| 
 | |
| 	/* Wait for all rcu_barrier_callback() callbacks to be invoked. */
 | |
| 	wait_for_completion(&rsp->barrier_completion);
 | |
| 
 | |
| 	/* Other rcu_barrier() invocations can now safely proceed. */
 | |
| 	mutex_unlock(&rsp->barrier_mutex);
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * rcu_barrier_bh - Wait until all in-flight call_rcu_bh() callbacks complete.
 | |
|  */
 | |
| void rcu_barrier_bh(void)
 | |
| {
 | |
| 	_rcu_barrier(&rcu_bh_state);
 | |
| }
 | |
| EXPORT_SYMBOL_GPL(rcu_barrier_bh);
 | |
| 
 | |
| /**
 | |
|  * rcu_barrier_sched - Wait for in-flight call_rcu_sched() callbacks.
 | |
|  */
 | |
| void rcu_barrier_sched(void)
 | |
| {
 | |
| 	_rcu_barrier(&rcu_sched_state);
 | |
| }
 | |
| EXPORT_SYMBOL_GPL(rcu_barrier_sched);
 | |
| 
 | |
| /*
 | |
|  * Do boot-time initialization of a CPU's per-CPU RCU data.
 | |
|  */
 | |
| static void __init
 | |
| rcu_boot_init_percpu_data(int cpu, struct rcu_state *rsp)
 | |
| {
 | |
| 	unsigned long flags;
 | |
| 	struct rcu_data *rdp = per_cpu_ptr(rsp->rda, cpu);
 | |
| 	struct rcu_node *rnp = rcu_get_root(rsp);
 | |
| 
 | |
| 	/* Set up local state, ensuring consistent view of global state. */
 | |
| 	raw_spin_lock_irqsave(&rnp->lock, flags);
 | |
| 	rdp->grpmask = 1UL << (cpu - rdp->mynode->grplo);
 | |
| 	init_callback_list(rdp);
 | |
| 	rdp->qlen_lazy = 0;
 | |
| 	ACCESS_ONCE(rdp->qlen) = 0;
 | |
| 	rdp->dynticks = &per_cpu(rcu_dynticks, cpu);
 | |
| 	WARN_ON_ONCE(rdp->dynticks->dynticks_nesting != DYNTICK_TASK_EXIT_IDLE);
 | |
| 	WARN_ON_ONCE(atomic_read(&rdp->dynticks->dynticks) != 1);
 | |
| 	rdp->cpu = cpu;
 | |
| 	rdp->rsp = rsp;
 | |
| 	rcu_boot_init_nocb_percpu_data(rdp);
 | |
| 	raw_spin_unlock_irqrestore(&rnp->lock, flags);
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * Initialize a CPU's per-CPU RCU data.  Note that only one online or
 | |
|  * offline event can be happening at a given time.  Note also that we
 | |
|  * can accept some slop in the rsp->completed access due to the fact
 | |
|  * that this CPU cannot possibly have any RCU callbacks in flight yet.
 | |
|  */
 | |
| static void
 | |
| rcu_init_percpu_data(int cpu, struct rcu_state *rsp, int preemptible)
 | |
| {
 | |
| 	unsigned long flags;
 | |
| 	unsigned long mask;
 | |
| 	struct rcu_data *rdp = per_cpu_ptr(rsp->rda, cpu);
 | |
| 	struct rcu_node *rnp = rcu_get_root(rsp);
 | |
| 
 | |
| 	/* Exclude new grace periods. */
 | |
| 	mutex_lock(&rsp->onoff_mutex);
 | |
| 
 | |
| 	/* Set up local state, ensuring consistent view of global state. */
 | |
| 	raw_spin_lock_irqsave(&rnp->lock, flags);
 | |
| 	rdp->beenonline = 1;	 /* We have now been online. */
 | |
| 	rdp->preemptible = preemptible;
 | |
| 	rdp->qlen_last_fqs_check = 0;
 | |
| 	rdp->n_force_qs_snap = rsp->n_force_qs;
 | |
| 	rdp->blimit = blimit;
 | |
| 	init_callback_list(rdp);  /* Re-enable callbacks on this CPU. */
 | |
| 	rdp->dynticks->dynticks_nesting = DYNTICK_TASK_EXIT_IDLE;
 | |
| 	rcu_sysidle_init_percpu_data(rdp->dynticks);
 | |
| 	atomic_set(&rdp->dynticks->dynticks,
 | |
| 		   (atomic_read(&rdp->dynticks->dynticks) & ~0x1) + 1);
 | |
| 	raw_spin_unlock(&rnp->lock);		/* irqs remain disabled. */
 | |
| 
 | |
| 	/* Add CPU to rcu_node bitmasks. */
 | |
| 	rnp = rdp->mynode;
 | |
| 	mask = rdp->grpmask;
 | |
| 	do {
 | |
| 		/* Exclude any attempts to start a new GP on small systems. */
 | |
| 		raw_spin_lock(&rnp->lock);	/* irqs already disabled. */
 | |
| 		rnp->qsmaskinit |= mask;
 | |
| 		mask = rnp->grpmask;
 | |
| 		if (rnp == rdp->mynode) {
 | |
| 			/*
 | |
| 			 * If there is a grace period in progress, we will
 | |
| 			 * set up to wait for it next time we run the
 | |
| 			 * RCU core code.
 | |
| 			 */
 | |
| 			rdp->gpnum = rnp->completed;
 | |
| 			rdp->completed = rnp->completed;
 | |
| 			rdp->passed_quiesce = 0;
 | |
| 			rdp->qs_pending = 0;
 | |
| 			trace_rcu_grace_period(rsp->name, rdp->gpnum, TPS("cpuonl"));
 | |
| 		}
 | |
| 		raw_spin_unlock(&rnp->lock); /* irqs already disabled. */
 | |
| 		rnp = rnp->parent;
 | |
| 	} while (rnp != NULL && !(rnp->qsmaskinit & mask));
 | |
| 	local_irq_restore(flags);
 | |
| 
 | |
| 	mutex_unlock(&rsp->onoff_mutex);
 | |
| }
 | |
| 
 | |
| static void rcu_prepare_cpu(int cpu)
 | |
| {
 | |
| 	struct rcu_state *rsp;
 | |
| 
 | |
| 	for_each_rcu_flavor(rsp)
 | |
| 		rcu_init_percpu_data(cpu, rsp,
 | |
| 				     strcmp(rsp->name, "rcu_preempt") == 0);
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * Handle CPU online/offline notification events.
 | |
|  */
 | |
| static int rcu_cpu_notify(struct notifier_block *self,
 | |
| 				    unsigned long action, void *hcpu)
 | |
| {
 | |
| 	long cpu = (long)hcpu;
 | |
| 	struct rcu_data *rdp = per_cpu_ptr(rcu_state->rda, cpu);
 | |
| 	struct rcu_node *rnp = rdp->mynode;
 | |
| 	struct rcu_state *rsp;
 | |
| 
 | |
| 	trace_rcu_utilization(TPS("Start CPU hotplug"));
 | |
| 	switch (action) {
 | |
| 	case CPU_UP_PREPARE:
 | |
| 	case CPU_UP_PREPARE_FROZEN:
 | |
| 		rcu_prepare_cpu(cpu);
 | |
| 		rcu_prepare_kthreads(cpu);
 | |
| 		break;
 | |
| 	case CPU_ONLINE:
 | |
| 	case CPU_DOWN_FAILED:
 | |
| 		rcu_boost_kthread_setaffinity(rnp, -1);
 | |
| 		break;
 | |
| 	case CPU_DOWN_PREPARE:
 | |
| 		rcu_boost_kthread_setaffinity(rnp, cpu);
 | |
| 		break;
 | |
| 	case CPU_DYING:
 | |
| 	case CPU_DYING_FROZEN:
 | |
| 		for_each_rcu_flavor(rsp)
 | |
| 			rcu_cleanup_dying_cpu(rsp);
 | |
| 		break;
 | |
| 	case CPU_DEAD:
 | |
| 	case CPU_DEAD_FROZEN:
 | |
| 	case CPU_UP_CANCELED:
 | |
| 	case CPU_UP_CANCELED_FROZEN:
 | |
| 		for_each_rcu_flavor(rsp)
 | |
| 			rcu_cleanup_dead_cpu(cpu, rsp);
 | |
| 		break;
 | |
| 	default:
 | |
| 		break;
 | |
| 	}
 | |
| 	trace_rcu_utilization(TPS("End CPU hotplug"));
 | |
| 	return NOTIFY_OK;
 | |
| }
 | |
| 
 | |
| static int rcu_pm_notify(struct notifier_block *self,
 | |
| 			 unsigned long action, void *hcpu)
 | |
| {
 | |
| 	switch (action) {
 | |
| 	case PM_HIBERNATION_PREPARE:
 | |
| 	case PM_SUSPEND_PREPARE:
 | |
| 		if (nr_cpu_ids <= 256) /* Expediting bad for large systems. */
 | |
| 			rcu_expedited = 1;
 | |
| 		break;
 | |
| 	case PM_POST_HIBERNATION:
 | |
| 	case PM_POST_SUSPEND:
 | |
| 		rcu_expedited = 0;
 | |
| 		break;
 | |
| 	default:
 | |
| 		break;
 | |
| 	}
 | |
| 	return NOTIFY_OK;
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * Spawn the kthread that handles this RCU flavor's grace periods.
 | |
|  */
 | |
| static int __init rcu_spawn_gp_kthread(void)
 | |
| {
 | |
| 	unsigned long flags;
 | |
| 	struct rcu_node *rnp;
 | |
| 	struct rcu_state *rsp;
 | |
| 	struct task_struct *t;
 | |
| 
 | |
| 	for_each_rcu_flavor(rsp) {
 | |
| 		t = kthread_run(rcu_gp_kthread, rsp, "%s", rsp->name);
 | |
| 		BUG_ON(IS_ERR(t));
 | |
| 		rnp = rcu_get_root(rsp);
 | |
| 		raw_spin_lock_irqsave(&rnp->lock, flags);
 | |
| 		rsp->gp_kthread = t;
 | |
| 		raw_spin_unlock_irqrestore(&rnp->lock, flags);
 | |
| 		rcu_spawn_nocb_kthreads(rsp);
 | |
| 	}
 | |
| 	return 0;
 | |
| }
 | |
| early_initcall(rcu_spawn_gp_kthread);
 | |
| 
 | |
| /*
 | |
|  * This function is invoked towards the end of the scheduler's initialization
 | |
|  * process.  Before this is called, the idle task might contain
 | |
|  * RCU read-side critical sections (during which time, this idle
 | |
|  * task is booting the system).  After this function is called, the
 | |
|  * idle tasks are prohibited from containing RCU read-side critical
 | |
|  * sections.  This function also enables RCU lockdep checking.
 | |
|  */
 | |
| void rcu_scheduler_starting(void)
 | |
| {
 | |
| 	WARN_ON(num_online_cpus() != 1);
 | |
| 	WARN_ON(nr_context_switches() > 0);
 | |
| 	rcu_scheduler_active = 1;
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * Compute the per-level fanout, either using the exact fanout specified
 | |
|  * or balancing the tree, depending on CONFIG_RCU_FANOUT_EXACT.
 | |
|  */
 | |
| #ifdef CONFIG_RCU_FANOUT_EXACT
 | |
| static void __init rcu_init_levelspread(struct rcu_state *rsp)
 | |
| {
 | |
| 	int i;
 | |
| 
 | |
| 	rsp->levelspread[rcu_num_lvls - 1] = rcu_fanout_leaf;
 | |
| 	for (i = rcu_num_lvls - 2; i >= 0; i--)
 | |
| 		rsp->levelspread[i] = CONFIG_RCU_FANOUT;
 | |
| }
 | |
| #else /* #ifdef CONFIG_RCU_FANOUT_EXACT */
 | |
| static void __init rcu_init_levelspread(struct rcu_state *rsp)
 | |
| {
 | |
| 	int ccur;
 | |
| 	int cprv;
 | |
| 	int i;
 | |
| 
 | |
| 	cprv = nr_cpu_ids;
 | |
| 	for (i = rcu_num_lvls - 1; i >= 0; i--) {
 | |
| 		ccur = rsp->levelcnt[i];
 | |
| 		rsp->levelspread[i] = (cprv + ccur - 1) / ccur;
 | |
| 		cprv = ccur;
 | |
| 	}
 | |
| }
 | |
| #endif /* #else #ifdef CONFIG_RCU_FANOUT_EXACT */
 | |
| 
 | |
| /*
 | |
|  * Helper function for rcu_init() that initializes one rcu_state structure.
 | |
|  */
 | |
| static void __init rcu_init_one(struct rcu_state *rsp,
 | |
| 		struct rcu_data __percpu *rda)
 | |
| {
 | |
| 	static char *buf[] = { "rcu_node_0",
 | |
| 			       "rcu_node_1",
 | |
| 			       "rcu_node_2",
 | |
| 			       "rcu_node_3" };  /* Match MAX_RCU_LVLS */
 | |
| 	static char *fqs[] = { "rcu_node_fqs_0",
 | |
| 			       "rcu_node_fqs_1",
 | |
| 			       "rcu_node_fqs_2",
 | |
| 			       "rcu_node_fqs_3" };  /* Match MAX_RCU_LVLS */
 | |
| 	int cpustride = 1;
 | |
| 	int i;
 | |
| 	int j;
 | |
| 	struct rcu_node *rnp;
 | |
| 
 | |
| 	BUILD_BUG_ON(MAX_RCU_LVLS > ARRAY_SIZE(buf));  /* Fix buf[] init! */
 | |
| 
 | |
| 	/* Silence gcc 4.8 warning about array index out of range. */
 | |
| 	if (rcu_num_lvls > RCU_NUM_LVLS)
 | |
| 		panic("rcu_init_one: rcu_num_lvls overflow");
 | |
| 
 | |
| 	/* Initialize the level-tracking arrays. */
 | |
| 
 | |
| 	for (i = 0; i < rcu_num_lvls; i++)
 | |
| 		rsp->levelcnt[i] = num_rcu_lvl[i];
 | |
| 	for (i = 1; i < rcu_num_lvls; i++)
 | |
| 		rsp->level[i] = rsp->level[i - 1] + rsp->levelcnt[i - 1];
 | |
| 	rcu_init_levelspread(rsp);
 | |
| 
 | |
| 	/* Initialize the elements themselves, starting from the leaves. */
 | |
| 
 | |
| 	for (i = rcu_num_lvls - 1; i >= 0; i--) {
 | |
| 		cpustride *= rsp->levelspread[i];
 | |
| 		rnp = rsp->level[i];
 | |
| 		for (j = 0; j < rsp->levelcnt[i]; j++, rnp++) {
 | |
| 			raw_spin_lock_init(&rnp->lock);
 | |
| 			lockdep_set_class_and_name(&rnp->lock,
 | |
| 						   &rcu_node_class[i], buf[i]);
 | |
| 			raw_spin_lock_init(&rnp->fqslock);
 | |
| 			lockdep_set_class_and_name(&rnp->fqslock,
 | |
| 						   &rcu_fqs_class[i], fqs[i]);
 | |
| 			rnp->gpnum = rsp->gpnum;
 | |
| 			rnp->completed = rsp->completed;
 | |
| 			rnp->qsmask = 0;
 | |
| 			rnp->qsmaskinit = 0;
 | |
| 			rnp->grplo = j * cpustride;
 | |
| 			rnp->grphi = (j + 1) * cpustride - 1;
 | |
| 			if (rnp->grphi >= NR_CPUS)
 | |
| 				rnp->grphi = NR_CPUS - 1;
 | |
| 			if (i == 0) {
 | |
| 				rnp->grpnum = 0;
 | |
| 				rnp->grpmask = 0;
 | |
| 				rnp->parent = NULL;
 | |
| 			} else {
 | |
| 				rnp->grpnum = j % rsp->levelspread[i - 1];
 | |
| 				rnp->grpmask = 1UL << rnp->grpnum;
 | |
| 				rnp->parent = rsp->level[i - 1] +
 | |
| 					      j / rsp->levelspread[i - 1];
 | |
| 			}
 | |
| 			rnp->level = i;
 | |
| 			INIT_LIST_HEAD(&rnp->blkd_tasks);
 | |
| 			rcu_init_one_nocb(rnp);
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	rsp->rda = rda;
 | |
| 	init_waitqueue_head(&rsp->gp_wq);
 | |
| 	init_irq_work(&rsp->wakeup_work, rsp_wakeup);
 | |
| 	rnp = rsp->level[rcu_num_lvls - 1];
 | |
| 	for_each_possible_cpu(i) {
 | |
| 		while (i > rnp->grphi)
 | |
| 			rnp++;
 | |
| 		per_cpu_ptr(rsp->rda, i)->mynode = rnp;
 | |
| 		rcu_boot_init_percpu_data(i, rsp);
 | |
| 	}
 | |
| 	list_add(&rsp->flavors, &rcu_struct_flavors);
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * Compute the rcu_node tree geometry from kernel parameters.  This cannot
 | |
|  * replace the definitions in tree.h because those are needed to size
 | |
|  * the ->node array in the rcu_state structure.
 | |
|  */
 | |
| static void __init rcu_init_geometry(void)
 | |
| {
 | |
| 	ulong d;
 | |
| 	int i;
 | |
| 	int j;
 | |
| 	int n = nr_cpu_ids;
 | |
| 	int rcu_capacity[MAX_RCU_LVLS + 1];
 | |
| 
 | |
| 	/*
 | |
| 	 * Initialize any unspecified boot parameters.
 | |
| 	 * The default values of jiffies_till_first_fqs and
 | |
| 	 * jiffies_till_next_fqs are set to the RCU_JIFFIES_TILL_FORCE_QS
 | |
| 	 * value, which is a function of HZ, then adding one for each
 | |
| 	 * RCU_JIFFIES_FQS_DIV CPUs that might be on the system.
 | |
| 	 */
 | |
| 	d = RCU_JIFFIES_TILL_FORCE_QS + nr_cpu_ids / RCU_JIFFIES_FQS_DIV;
 | |
| 	if (jiffies_till_first_fqs == ULONG_MAX)
 | |
| 		jiffies_till_first_fqs = d;
 | |
| 	if (jiffies_till_next_fqs == ULONG_MAX)
 | |
| 		jiffies_till_next_fqs = d;
 | |
| 
 | |
| 	/* If the compile-time values are accurate, just leave. */
 | |
| 	if (rcu_fanout_leaf == CONFIG_RCU_FANOUT_LEAF &&
 | |
| 	    nr_cpu_ids == NR_CPUS)
 | |
| 		return;
 | |
| 	pr_info("RCU: Adjusting geometry for rcu_fanout_leaf=%d, nr_cpu_ids=%d\n",
 | |
| 		rcu_fanout_leaf, nr_cpu_ids);
 | |
| 
 | |
| 	/*
 | |
| 	 * Compute number of nodes that can be handled an rcu_node tree
 | |
| 	 * with the given number of levels.  Setting rcu_capacity[0] makes
 | |
| 	 * some of the arithmetic easier.
 | |
| 	 */
 | |
| 	rcu_capacity[0] = 1;
 | |
| 	rcu_capacity[1] = rcu_fanout_leaf;
 | |
| 	for (i = 2; i <= MAX_RCU_LVLS; i++)
 | |
| 		rcu_capacity[i] = rcu_capacity[i - 1] * CONFIG_RCU_FANOUT;
 | |
| 
 | |
| 	/*
 | |
| 	 * The boot-time rcu_fanout_leaf parameter is only permitted
 | |
| 	 * to increase the leaf-level fanout, not decrease it.  Of course,
 | |
| 	 * the leaf-level fanout cannot exceed the number of bits in
 | |
| 	 * the rcu_node masks.  Finally, the tree must be able to accommodate
 | |
| 	 * the configured number of CPUs.  Complain and fall back to the
 | |
| 	 * compile-time values if these limits are exceeded.
 | |
| 	 */
 | |
| 	if (rcu_fanout_leaf < CONFIG_RCU_FANOUT_LEAF ||
 | |
| 	    rcu_fanout_leaf > sizeof(unsigned long) * 8 ||
 | |
| 	    n > rcu_capacity[MAX_RCU_LVLS]) {
 | |
| 		WARN_ON(1);
 | |
| 		return;
 | |
| 	}
 | |
| 
 | |
| 	/* Calculate the number of rcu_nodes at each level of the tree. */
 | |
| 	for (i = 1; i <= MAX_RCU_LVLS; i++)
 | |
| 		if (n <= rcu_capacity[i]) {
 | |
| 			for (j = 0; j <= i; j++)
 | |
| 				num_rcu_lvl[j] =
 | |
| 					DIV_ROUND_UP(n, rcu_capacity[i - j]);
 | |
| 			rcu_num_lvls = i;
 | |
| 			for (j = i + 1; j <= MAX_RCU_LVLS; j++)
 | |
| 				num_rcu_lvl[j] = 0;
 | |
| 			break;
 | |
| 		}
 | |
| 
 | |
| 	/* Calculate the total number of rcu_node structures. */
 | |
| 	rcu_num_nodes = 0;
 | |
| 	for (i = 0; i <= MAX_RCU_LVLS; i++)
 | |
| 		rcu_num_nodes += num_rcu_lvl[i];
 | |
| 	rcu_num_nodes -= n;
 | |
| }
 | |
| 
 | |
| void __init rcu_init(void)
 | |
| {
 | |
| 	int cpu;
 | |
| 
 | |
| 	rcu_bootup_announce();
 | |
| 	rcu_init_geometry();
 | |
| 	rcu_init_one(&rcu_bh_state, &rcu_bh_data);
 | |
| 	rcu_init_one(&rcu_sched_state, &rcu_sched_data);
 | |
| 	__rcu_init_preempt();
 | |
| 	open_softirq(RCU_SOFTIRQ, rcu_process_callbacks);
 | |
| 
 | |
| 	/*
 | |
| 	 * We don't need protection against CPU-hotplug here because
 | |
| 	 * this is called early in boot, before either interrupts
 | |
| 	 * or the scheduler are operational.
 | |
| 	 */
 | |
| 	cpu_notifier(rcu_cpu_notify, 0);
 | |
| 	pm_notifier(rcu_pm_notify, 0);
 | |
| 	for_each_online_cpu(cpu)
 | |
| 		rcu_cpu_notify(NULL, CPU_UP_PREPARE, (void *)(long)cpu);
 | |
| }
 | |
| 
 | |
| #include "tree_plugin.h"
 |