 ee1a8d402e
			
		
	
	
	ee1a8d402e
	
	
	
		
			
			These changes from 30 individual branches for the most part update device tree files, but there are also a few source code changes that have crept in this time, usually in order to atomically move over a driver from using hardcoded data to DT probing. A number of platforms change their DT files to use the C preprocessor, which is causing a bit of churn, but that is hopefully only this once. There are a few conflicts with the other branches unfortunately: * in exynos5440.dtsi and kirkwood-6281.dtsi, device nodes are added from multiple branches. Need to be careful to have the right set of closing braces as git gets this one wrong. * In kirkwood.dtsi, one 'ranges' line got split into two lines, while another line got added. Order of the lines does not matter. * in sama5d3.dtsi, some cleanup was merged the wrong way, causing a bogus conflict. We want the 'dmas' and 'dma-names' properties to get added here. * Two lines got removed independently in arch/arm/mach-mxs/mach-mxs.c * Contents get added independently in arch/arm/mach-omap2/cclock33xx_data.c -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.12 (GNU/Linux) iQIVAwUAUdLnpGCrR//JCVInAQI50RAAsXbH1SGvjKJemXhRkFloPDYpCbgdDUFr ChUbjNV1xsY/jaNCfMa5/Qo7lgz/Ot7BpJef9fZn7ret+dc7nchqe/4iIkAokAUh E4ao9D1dP5aAA0ihdbSQHCZtR/0SUR81h6BoOVuo/1mvEiBaFbWAeYe8/6LJd9II OU1w9bDmjfZWYFUXs+j2VF76ueZQ+kz69XDKZUGtkqN76m1AL8lGDurj5jxvyllF VJns8d9q2nr2q9PferfajK6rkOIPaTpwKblxZHUgobCyOitZaiZM0NgF733TsNM6 HXmhDhkcn7T81+SiHVfigJ/nxo9UgU4zNJCODF3WZIwGIj3FbxvCOpdCYi2NhCO8 oLcgDk57tpoKpB3gvAmYVQHP9FIepFa/WAWyPIADA7PkpYrwgc4v+cLEHXpd8SRv viLLIa5QuNdMeaK+Md9OKmKZFd7uFD9jiMtmdm6IpEVDDjMgoteb2XSoEtNebmtY MfbW4okn118a2dFKKaPTKcXVW/a5FRp2JGfB0A58RQHaJWj3JsY1bFn/xWPEpTOA IWB/HHMln0LYTL2AXN9HcaL1jnGI1Wq5eWBurX+cXQ/ij1A6jfoRKYglx7AQqOHj iWcGYtKLLJCgiWFnLSwcljZhfoYr0/z7rhns6yo7/vhN0riy+M84OgN4HbAmUzc1 Bgy9PnJTNo8= =8PtJ -----END PGP SIGNATURE----- Merge tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC device tree changes from Arnd Bergmann: "These changes from 30 individual branches for the most part update device tree files, but there are also a few source code changes that have crept in this time, usually in order to atomically move over a driver from using hardcoded data to DT probing. A number of platforms change their DT files to use the C preprocessor, which is causing a bit of churn, but that is hopefully only this once" * tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (372 commits) ARM: at91: dt: rm9200ek: add spi support ARM: at91: dt: rm9200: add spi support ARM: at91/DT: at91sam9n12: add SPI DMA client infos ARM: at91/DT: sama5d3: add SPI DMA client infos ARM: at91/DT: fix SPI compatibility string ARM: Kirkwood: Fix the internal register ranges translation ARM: dts: bcm281xx: change comment to C89 style ARM: mmc: bcm281xx SDHCI driver (dt mods) ARM: nomadik: add the new clocks to the device tree clk: nomadik: implement the Nomadik clocks properly ARM: dts: omap5-uevm: Provide USB Host PHY clock frequency ARM: dts: omap4-panda: Fix DVI EDID reads ARM: dts: omap4-panda: Add USB Host support arm: mvebu: enable mini-PCIe connectors on Armada 370 RD ARM: shmobile: irqpin: add a DT property to enable masking on parent ARM: dts: AM43x EPOS EVM support ARM: dts: OMAP5: Add bandgap DT entry ARM: dts: AM33XX: Add pinmux configuration for CPSW to am335x EVM ARM: dts: AM33XX: Add pinmux configuration for CPSW to EVMsk ARM: dts: AM33XX: Add pinmux configuration for CPSW to beaglebone ...
		
			
				
	
	
		
			433 lines
		
	
	
	
		
			12 KiB
			
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			433 lines
		
	
	
	
		
			12 KiB
			
		
	
	
	
		
			C
		
	
	
	
	
	
| /*
 | |
|  *  Chip-specific setup code for the AT91SAM9G45 family
 | |
|  *
 | |
|  *  Copyright (C) 2009 Atmel Corporation.
 | |
|  *
 | |
|  * This program is free software; you can redistribute it and/or modify
 | |
|  * it under the terms of the GNU General Public License as published by
 | |
|  * the Free Software Foundation; either version 2 of the License, or
 | |
|  * (at your option) any later version.
 | |
|  *
 | |
|  */
 | |
| 
 | |
| #include <linux/module.h>
 | |
| #include <linux/dma-mapping.h>
 | |
| 
 | |
| #include <asm/irq.h>
 | |
| #include <asm/mach/arch.h>
 | |
| #include <asm/mach/map.h>
 | |
| #include <asm/system_misc.h>
 | |
| #include <mach/at91sam9g45.h>
 | |
| #include <mach/at91_pmc.h>
 | |
| #include <mach/cpu.h>
 | |
| 
 | |
| #include "at91_aic.h"
 | |
| #include "soc.h"
 | |
| #include "generic.h"
 | |
| #include "clock.h"
 | |
| #include "sam9_smc.h"
 | |
| 
 | |
| /* --------------------------------------------------------------------
 | |
|  *  Clocks
 | |
|  * -------------------------------------------------------------------- */
 | |
| 
 | |
| /*
 | |
|  * The peripheral clocks.
 | |
|  */
 | |
| static struct clk pioA_clk = {
 | |
| 	.name		= "pioA_clk",
 | |
| 	.pmc_mask	= 1 << AT91SAM9G45_ID_PIOA,
 | |
| 	.type		= CLK_TYPE_PERIPHERAL,
 | |
| };
 | |
| static struct clk pioB_clk = {
 | |
| 	.name		= "pioB_clk",
 | |
| 	.pmc_mask	= 1 << AT91SAM9G45_ID_PIOB,
 | |
| 	.type		= CLK_TYPE_PERIPHERAL,
 | |
| };
 | |
| static struct clk pioC_clk = {
 | |
| 	.name		= "pioC_clk",
 | |
| 	.pmc_mask	= 1 << AT91SAM9G45_ID_PIOC,
 | |
| 	.type		= CLK_TYPE_PERIPHERAL,
 | |
| };
 | |
| static struct clk pioDE_clk = {
 | |
| 	.name		= "pioDE_clk",
 | |
| 	.pmc_mask	= 1 << AT91SAM9G45_ID_PIODE,
 | |
| 	.type		= CLK_TYPE_PERIPHERAL,
 | |
| };
 | |
| static struct clk trng_clk = {
 | |
| 	.name		= "trng_clk",
 | |
| 	.pmc_mask	= 1 << AT91SAM9G45_ID_TRNG,
 | |
| 	.type		= CLK_TYPE_PERIPHERAL,
 | |
| };
 | |
| static struct clk usart0_clk = {
 | |
| 	.name		= "usart0_clk",
 | |
| 	.pmc_mask	= 1 << AT91SAM9G45_ID_US0,
 | |
| 	.type		= CLK_TYPE_PERIPHERAL,
 | |
| };
 | |
| static struct clk usart1_clk = {
 | |
| 	.name		= "usart1_clk",
 | |
| 	.pmc_mask	= 1 << AT91SAM9G45_ID_US1,
 | |
| 	.type		= CLK_TYPE_PERIPHERAL,
 | |
| };
 | |
| static struct clk usart2_clk = {
 | |
| 	.name		= "usart2_clk",
 | |
| 	.pmc_mask	= 1 << AT91SAM9G45_ID_US2,
 | |
| 	.type		= CLK_TYPE_PERIPHERAL,
 | |
| };
 | |
| static struct clk usart3_clk = {
 | |
| 	.name		= "usart3_clk",
 | |
| 	.pmc_mask	= 1 << AT91SAM9G45_ID_US3,
 | |
| 	.type		= CLK_TYPE_PERIPHERAL,
 | |
| };
 | |
| static struct clk mmc0_clk = {
 | |
| 	.name		= "mci0_clk",
 | |
| 	.pmc_mask	= 1 << AT91SAM9G45_ID_MCI0,
 | |
| 	.type		= CLK_TYPE_PERIPHERAL,
 | |
| };
 | |
| static struct clk twi0_clk = {
 | |
| 	.name		= "twi0_clk",
 | |
| 	.pmc_mask	= 1 << AT91SAM9G45_ID_TWI0,
 | |
| 	.type		= CLK_TYPE_PERIPHERAL,
 | |
| };
 | |
| static struct clk twi1_clk = {
 | |
| 	.name		= "twi1_clk",
 | |
| 	.pmc_mask	= 1 << AT91SAM9G45_ID_TWI1,
 | |
| 	.type		= CLK_TYPE_PERIPHERAL,
 | |
| };
 | |
| static struct clk spi0_clk = {
 | |
| 	.name		= "spi0_clk",
 | |
| 	.pmc_mask	= 1 << AT91SAM9G45_ID_SPI0,
 | |
| 	.type		= CLK_TYPE_PERIPHERAL,
 | |
| };
 | |
| static struct clk spi1_clk = {
 | |
| 	.name		= "spi1_clk",
 | |
| 	.pmc_mask	= 1 << AT91SAM9G45_ID_SPI1,
 | |
| 	.type		= CLK_TYPE_PERIPHERAL,
 | |
| };
 | |
| static struct clk ssc0_clk = {
 | |
| 	.name		= "ssc0_clk",
 | |
| 	.pmc_mask	= 1 << AT91SAM9G45_ID_SSC0,
 | |
| 	.type		= CLK_TYPE_PERIPHERAL,
 | |
| };
 | |
| static struct clk ssc1_clk = {
 | |
| 	.name		= "ssc1_clk",
 | |
| 	.pmc_mask	= 1 << AT91SAM9G45_ID_SSC1,
 | |
| 	.type		= CLK_TYPE_PERIPHERAL,
 | |
| };
 | |
| static struct clk tcb0_clk = {
 | |
| 	.name		= "tcb0_clk",
 | |
| 	.pmc_mask	= 1 << AT91SAM9G45_ID_TCB,
 | |
| 	.type		= CLK_TYPE_PERIPHERAL,
 | |
| };
 | |
| static struct clk pwm_clk = {
 | |
| 	.name		= "pwm_clk",
 | |
| 	.pmc_mask	= 1 << AT91SAM9G45_ID_PWMC,
 | |
| 	.type		= CLK_TYPE_PERIPHERAL,
 | |
| };
 | |
| static struct clk tsc_clk = {
 | |
| 	.name		= "tsc_clk",
 | |
| 	.pmc_mask	= 1 << AT91SAM9G45_ID_TSC,
 | |
| 	.type		= CLK_TYPE_PERIPHERAL,
 | |
| };
 | |
| static struct clk dma_clk = {
 | |
| 	.name		= "dma_clk",
 | |
| 	.pmc_mask	= 1 << AT91SAM9G45_ID_DMA,
 | |
| 	.type		= CLK_TYPE_PERIPHERAL,
 | |
| };
 | |
| static struct clk uhphs_clk = {
 | |
| 	.name		= "uhphs_clk",
 | |
| 	.pmc_mask	= 1 << AT91SAM9G45_ID_UHPHS,
 | |
| 	.type		= CLK_TYPE_PERIPHERAL,
 | |
| };
 | |
| static struct clk lcdc_clk = {
 | |
| 	.name		= "lcdc_clk",
 | |
| 	.pmc_mask	= 1 << AT91SAM9G45_ID_LCDC,
 | |
| 	.type		= CLK_TYPE_PERIPHERAL,
 | |
| };
 | |
| static struct clk ac97_clk = {
 | |
| 	.name		= "ac97_clk",
 | |
| 	.pmc_mask	= 1 << AT91SAM9G45_ID_AC97C,
 | |
| 	.type		= CLK_TYPE_PERIPHERAL,
 | |
| };
 | |
| static struct clk macb_clk = {
 | |
| 	.name		= "pclk",
 | |
| 	.pmc_mask	= 1 << AT91SAM9G45_ID_EMAC,
 | |
| 	.type		= CLK_TYPE_PERIPHERAL,
 | |
| };
 | |
| static struct clk isi_clk = {
 | |
| 	.name		= "isi_clk",
 | |
| 	.pmc_mask	= 1 << AT91SAM9G45_ID_ISI,
 | |
| 	.type		= CLK_TYPE_PERIPHERAL,
 | |
| };
 | |
| static struct clk udphs_clk = {
 | |
| 	.name		= "udphs_clk",
 | |
| 	.pmc_mask	= 1 << AT91SAM9G45_ID_UDPHS,
 | |
| 	.type		= CLK_TYPE_PERIPHERAL,
 | |
| };
 | |
| static struct clk mmc1_clk = {
 | |
| 	.name		= "mci1_clk",
 | |
| 	.pmc_mask	= 1 << AT91SAM9G45_ID_MCI1,
 | |
| 	.type		= CLK_TYPE_PERIPHERAL,
 | |
| };
 | |
| 
 | |
| /* Video decoder clock - Only for sam9m10/sam9m11 */
 | |
| static struct clk vdec_clk = {
 | |
| 	.name		= "vdec_clk",
 | |
| 	.pmc_mask	= 1 << AT91SAM9G45_ID_VDEC,
 | |
| 	.type		= CLK_TYPE_PERIPHERAL,
 | |
| };
 | |
| 
 | |
| static struct clk adc_op_clk = {
 | |
| 	.name		= "adc_op_clk",
 | |
| 	.type		= CLK_TYPE_PERIPHERAL,
 | |
| 	.rate_hz	= 13200000,
 | |
| };
 | |
| 
 | |
| /* AES/TDES/SHA clock - Only for sam9m11/sam9g56 */
 | |
| static struct clk aestdessha_clk = {
 | |
| 	.name		= "aestdessha_clk",
 | |
| 	.pmc_mask	= 1 << AT91SAM9G45_ID_AESTDESSHA,
 | |
| 	.type		= CLK_TYPE_PERIPHERAL,
 | |
| };
 | |
| 
 | |
| static struct clk *periph_clocks[] __initdata = {
 | |
| 	&pioA_clk,
 | |
| 	&pioB_clk,
 | |
| 	&pioC_clk,
 | |
| 	&pioDE_clk,
 | |
| 	&trng_clk,
 | |
| 	&usart0_clk,
 | |
| 	&usart1_clk,
 | |
| 	&usart2_clk,
 | |
| 	&usart3_clk,
 | |
| 	&mmc0_clk,
 | |
| 	&twi0_clk,
 | |
| 	&twi1_clk,
 | |
| 	&spi0_clk,
 | |
| 	&spi1_clk,
 | |
| 	&ssc0_clk,
 | |
| 	&ssc1_clk,
 | |
| 	&tcb0_clk,
 | |
| 	&pwm_clk,
 | |
| 	&tsc_clk,
 | |
| 	&dma_clk,
 | |
| 	&uhphs_clk,
 | |
| 	&lcdc_clk,
 | |
| 	&ac97_clk,
 | |
| 	&macb_clk,
 | |
| 	&isi_clk,
 | |
| 	&udphs_clk,
 | |
| 	&mmc1_clk,
 | |
| 	&adc_op_clk,
 | |
| 	&aestdessha_clk,
 | |
| 	// irq0
 | |
| };
 | |
| 
 | |
| static struct clk_lookup periph_clocks_lookups[] = {
 | |
| 	/* One additional fake clock for macb_hclk */
 | |
| 	CLKDEV_CON_ID("hclk", &macb_clk),
 | |
| 	/* One additional fake clock for ohci */
 | |
| 	CLKDEV_CON_ID("ohci_clk", &uhphs_clk),
 | |
| 	CLKDEV_CON_DEV_ID("hclk", "at91sam9g45-lcdfb.0", &lcdc_clk),
 | |
| 	CLKDEV_CON_DEV_ID("hclk", "at91sam9g45es-lcdfb.0", &lcdc_clk),
 | |
| 	CLKDEV_CON_DEV_ID("ehci_clk", "atmel-ehci", &uhphs_clk),
 | |
| 	CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc", &utmi_clk),
 | |
| 	CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc", &udphs_clk),
 | |
| 	CLKDEV_CON_DEV_ID("mci_clk", "atmel_mci.0", &mmc0_clk),
 | |
| 	CLKDEV_CON_DEV_ID("mci_clk", "atmel_mci.1", &mmc1_clk),
 | |
| 	CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk),
 | |
| 	CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk),
 | |
| 	CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tcb0_clk),
 | |
| 	CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.1", &tcb0_clk),
 | |
| 	CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9g10.0", &twi0_clk),
 | |
| 	CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9g10.1", &twi1_clk),
 | |
| 	CLKDEV_CON_DEV_ID("pclk", "at91sam9g45_ssc.0", &ssc0_clk),
 | |
| 	CLKDEV_CON_DEV_ID("pclk", "at91sam9g45_ssc.1", &ssc1_clk),
 | |
| 	CLKDEV_CON_DEV_ID("pclk", "fff9c000.ssc", &ssc0_clk),
 | |
| 	CLKDEV_CON_DEV_ID("pclk", "fffa0000.ssc", &ssc1_clk),
 | |
| 	CLKDEV_CON_DEV_ID(NULL, "atmel-trng", &trng_clk),
 | |
| 	CLKDEV_CON_DEV_ID(NULL, "atmel_sha", &aestdessha_clk),
 | |
| 	CLKDEV_CON_DEV_ID(NULL, "atmel_tdes", &aestdessha_clk),
 | |
| 	CLKDEV_CON_DEV_ID(NULL, "atmel_aes", &aestdessha_clk),
 | |
| 	/* more usart lookup table for DT entries */
 | |
| 	CLKDEV_CON_DEV_ID("usart", "ffffee00.serial", &mck),
 | |
| 	CLKDEV_CON_DEV_ID("usart", "fff8c000.serial", &usart0_clk),
 | |
| 	CLKDEV_CON_DEV_ID("usart", "fff90000.serial", &usart1_clk),
 | |
| 	CLKDEV_CON_DEV_ID("usart", "fff94000.serial", &usart2_clk),
 | |
| 	CLKDEV_CON_DEV_ID("usart", "fff98000.serial", &usart3_clk),
 | |
| 	/* more tc lookup table for DT entries */
 | |
| 	CLKDEV_CON_DEV_ID("t0_clk", "fff7c000.timer", &tcb0_clk),
 | |
| 	CLKDEV_CON_DEV_ID("t0_clk", "fffd4000.timer", &tcb0_clk),
 | |
| 	CLKDEV_CON_DEV_ID("hclk", "700000.ohci", &uhphs_clk),
 | |
| 	CLKDEV_CON_DEV_ID("ehci_clk", "800000.ehci", &uhphs_clk),
 | |
| 	CLKDEV_CON_DEV_ID("mci_clk", "fff80000.mmc", &mmc0_clk),
 | |
| 	CLKDEV_CON_DEV_ID("mci_clk", "fffd0000.mmc", &mmc1_clk),
 | |
| 	CLKDEV_CON_DEV_ID(NULL, "fff84000.i2c", &twi0_clk),
 | |
| 	CLKDEV_CON_DEV_ID(NULL, "fff88000.i2c", &twi1_clk),
 | |
| 	CLKDEV_CON_DEV_ID("spi_clk", "fffa4000.spi", &spi0_clk),
 | |
| 	CLKDEV_CON_DEV_ID("spi_clk", "fffa8000.spi", &spi1_clk),
 | |
| 	CLKDEV_CON_DEV_ID("hclk", "600000.gadget", &utmi_clk),
 | |
| 	CLKDEV_CON_DEV_ID("pclk", "600000.gadget", &udphs_clk),
 | |
| 	/* fake hclk clock */
 | |
| 	CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &uhphs_clk),
 | |
| 	CLKDEV_CON_DEV_ID(NULL, "fffff200.gpio", &pioA_clk),
 | |
| 	CLKDEV_CON_DEV_ID(NULL, "fffff400.gpio", &pioB_clk),
 | |
| 	CLKDEV_CON_DEV_ID(NULL, "fffff600.gpio", &pioC_clk),
 | |
| 	CLKDEV_CON_DEV_ID(NULL, "fffff800.gpio", &pioDE_clk),
 | |
| 	CLKDEV_CON_DEV_ID(NULL, "fffffa00.gpio", &pioDE_clk),
 | |
| 
 | |
| 	CLKDEV_CON_ID("pioA", &pioA_clk),
 | |
| 	CLKDEV_CON_ID("pioB", &pioB_clk),
 | |
| 	CLKDEV_CON_ID("pioC", &pioC_clk),
 | |
| 	CLKDEV_CON_ID("pioD", &pioDE_clk),
 | |
| 	CLKDEV_CON_ID("pioE", &pioDE_clk),
 | |
| 	/* Fake adc clock */
 | |
| 	CLKDEV_CON_ID("adc_clk", &tsc_clk),
 | |
| };
 | |
| 
 | |
| static struct clk_lookup usart_clocks_lookups[] = {
 | |
| 	CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck),
 | |
| 	CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk),
 | |
| 	CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk),
 | |
| 	CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk),
 | |
| 	CLKDEV_CON_DEV_ID("usart", "atmel_usart.4", &usart3_clk),
 | |
| };
 | |
| 
 | |
| /*
 | |
|  * The two programmable clocks.
 | |
|  * You must configure pin multiplexing to bring these signals out.
 | |
|  */
 | |
| static struct clk pck0 = {
 | |
| 	.name		= "pck0",
 | |
| 	.pmc_mask	= AT91_PMC_PCK0,
 | |
| 	.type		= CLK_TYPE_PROGRAMMABLE,
 | |
| 	.id		= 0,
 | |
| };
 | |
| static struct clk pck1 = {
 | |
| 	.name		= "pck1",
 | |
| 	.pmc_mask	= AT91_PMC_PCK1,
 | |
| 	.type		= CLK_TYPE_PROGRAMMABLE,
 | |
| 	.id		= 1,
 | |
| };
 | |
| 
 | |
| static void __init at91sam9g45_register_clocks(void)
 | |
| {
 | |
| 	int i;
 | |
| 
 | |
| 	for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
 | |
| 		clk_register(periph_clocks[i]);
 | |
| 
 | |
| 	clkdev_add_table(periph_clocks_lookups,
 | |
| 			 ARRAY_SIZE(periph_clocks_lookups));
 | |
| 	clkdev_add_table(usart_clocks_lookups,
 | |
| 			 ARRAY_SIZE(usart_clocks_lookups));
 | |
| 
 | |
| 	if (cpu_is_at91sam9m10() || cpu_is_at91sam9m11())
 | |
| 		clk_register(&vdec_clk);
 | |
| 
 | |
| 	clk_register(&pck0);
 | |
| 	clk_register(&pck1);
 | |
| }
 | |
| 
 | |
| /* --------------------------------------------------------------------
 | |
|  *  GPIO
 | |
|  * -------------------------------------------------------------------- */
 | |
| 
 | |
| static struct at91_gpio_bank at91sam9g45_gpio[] __initdata = {
 | |
| 	{
 | |
| 		.id		= AT91SAM9G45_ID_PIOA,
 | |
| 		.regbase	= AT91SAM9G45_BASE_PIOA,
 | |
| 	}, {
 | |
| 		.id		= AT91SAM9G45_ID_PIOB,
 | |
| 		.regbase	= AT91SAM9G45_BASE_PIOB,
 | |
| 	}, {
 | |
| 		.id		= AT91SAM9G45_ID_PIOC,
 | |
| 		.regbase	= AT91SAM9G45_BASE_PIOC,
 | |
| 	}, {
 | |
| 		.id		= AT91SAM9G45_ID_PIODE,
 | |
| 		.regbase	= AT91SAM9G45_BASE_PIOD,
 | |
| 	}, {
 | |
| 		.id		= AT91SAM9G45_ID_PIODE,
 | |
| 		.regbase	= AT91SAM9G45_BASE_PIOE,
 | |
| 	}
 | |
| };
 | |
| 
 | |
| /* --------------------------------------------------------------------
 | |
|  *  AT91SAM9G45 processor initialization
 | |
|  * -------------------------------------------------------------------- */
 | |
| 
 | |
| static void __init at91sam9g45_map_io(void)
 | |
| {
 | |
| 	at91_init_sram(0, AT91SAM9G45_SRAM_BASE, AT91SAM9G45_SRAM_SIZE);
 | |
| }
 | |
| 
 | |
| static void __init at91sam9g45_ioremap_registers(void)
 | |
| {
 | |
| 	at91_ioremap_shdwc(AT91SAM9G45_BASE_SHDWC);
 | |
| 	at91_ioremap_rstc(AT91SAM9G45_BASE_RSTC);
 | |
| 	at91_ioremap_ramc(0, AT91SAM9G45_BASE_DDRSDRC1, 512);
 | |
| 	at91_ioremap_ramc(1, AT91SAM9G45_BASE_DDRSDRC0, 512);
 | |
| 	at91sam926x_ioremap_pit(AT91SAM9G45_BASE_PIT);
 | |
| 	at91sam9_ioremap_smc(0, AT91SAM9G45_BASE_SMC);
 | |
| 	at91_ioremap_matrix(AT91SAM9G45_BASE_MATRIX);
 | |
| }
 | |
| 
 | |
| static void __init at91sam9g45_initialize(void)
 | |
| {
 | |
| 	arm_pm_idle = at91sam9_idle;
 | |
| 	arm_pm_restart = at91sam9g45_restart;
 | |
| 
 | |
| 	/* Register GPIO subsystem */
 | |
| 	at91_gpio_init(at91sam9g45_gpio, 5);
 | |
| }
 | |
| 
 | |
| /* --------------------------------------------------------------------
 | |
|  *  Interrupt initialization
 | |
|  * -------------------------------------------------------------------- */
 | |
| 
 | |
| /*
 | |
|  * The default interrupt priority levels (0 = lowest, 7 = highest).
 | |
|  */
 | |
| static unsigned int at91sam9g45_default_irq_priority[NR_AIC_IRQS] __initdata = {
 | |
| 	7,	/* Advanced Interrupt Controller (FIQ) */
 | |
| 	7,	/* System Peripherals */
 | |
| 	1,	/* Parallel IO Controller A */
 | |
| 	1,	/* Parallel IO Controller B */
 | |
| 	1,	/* Parallel IO Controller C */
 | |
| 	1,	/* Parallel IO Controller D and E */
 | |
| 	0,
 | |
| 	5,	/* USART 0 */
 | |
| 	5,	/* USART 1 */
 | |
| 	5,	/* USART 2 */
 | |
| 	5,	/* USART 3 */
 | |
| 	0,	/* Multimedia Card Interface 0 */
 | |
| 	6,	/* Two-Wire Interface 0 */
 | |
| 	6,	/* Two-Wire Interface 1 */
 | |
| 	5,	/* Serial Peripheral Interface 0 */
 | |
| 	5,	/* Serial Peripheral Interface 1 */
 | |
| 	4,	/* Serial Synchronous Controller 0 */
 | |
| 	4,	/* Serial Synchronous Controller 1 */
 | |
| 	0,	/* Timer Counter 0, 1, 2, 3, 4 and 5 */
 | |
| 	0,	/* Pulse Width Modulation Controller */
 | |
| 	0,	/* Touch Screen Controller */
 | |
| 	0,	/* DMA Controller */
 | |
| 	2,	/* USB Host High Speed port */
 | |
| 	3,	/* LDC Controller */
 | |
| 	5,	/* AC97 Controller */
 | |
| 	3,	/* Ethernet */
 | |
| 	0,	/* Image Sensor Interface */
 | |
| 	2,	/* USB Device High speed port */
 | |
| 	0,	/* AESTDESSHA Crypto HW Accelerators */
 | |
| 	0,	/* Multimedia Card Interface 1 */
 | |
| 	0,
 | |
| 	0,	/* Advanced Interrupt Controller (IRQ0) */
 | |
| };
 | |
| 
 | |
| AT91_SOC_START(at91sam9g45)
 | |
| 	.map_io = at91sam9g45_map_io,
 | |
| 	.default_irq_priority = at91sam9g45_default_irq_priority,
 | |
| 	.extern_irq = (1 << AT91SAM9G45_ID_IRQ0),
 | |
| 	.ioremap_registers = at91sam9g45_ioremap_registers,
 | |
| 	.register_clocks = at91sam9g45_register_clocks,
 | |
| 	.init = at91sam9g45_initialize,
 | |
| AT91_SOC_END
 |