 046e7d685b
			
		
	
	
	046e7d685b
	
	
	
		
			
			This update contains a fairly wide range of changes all over in sound
 subdirectory, mainly because of UAPI header moves by David and __dev*
 annotation removals by Bill.  Other highlights are:
 
 - Introduced the support for wallclock timestamps in ALSA PCM core
 
 - Add the poll loop implementation for HD-audio jack detection
 
 - Yet more VGA-switcheroo fixes for HD-audio
 
 - New VIA HD-audio codec support
 
 - More fixes on resource management in USB audio and MIDI drivers
 
 - More quirks for USB-audio ASUS Xonar U3, Reloop Play,  Focusrite,
   Roland VG-99, etc
 
 - Add support for FastTrack C400 usb-audio
 
 - Clean ups in many drivers regarding firmware loading
 
 - Add PSC724 Ultiimate Edge support to ice1712
 
 - A few hdspm driver updates
 
 - New Stanton SCS.1d/1m FireWire driver
 
 - Standardisation of the logging in ASoC codes
 
 - DT and dmaengine support for ASoC Atmel
 
 - Support for Wolfson ADSP cores
 
 - New drivers for Freescale/iVeia P1022 and Maxim MAX98090
 
 - Lots of other ASoC driver fixes and developments
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iQIcBAABAgAGBQJQyYh9AAoJEGwxgFQ9KSmk95UP+wcVXRynWulCVwEnVjjWv/UM
 2fIsD0RkWO4WoqEVCNCHzW27pvFC36uqLx5vtas4CoJ2CX8ufQsPqWTx6K3MY/DQ
 /VJT8CI2EKPQY1Q0PySVo2nBqwcUXWWoZE47t1ZowR6cxtmgrS8lLxYJvkbfEOHF
 PS8WItACqH5F5VPxGFkhPwR2OTLfaYt7ilKx82vgxSzdMAel8q/I9uS/MUv8KV+1
 1s5yBvlW5eyDXKpQbP/KiMJLJ/zk1MRAKK2HftAk8pNt+Xy160NvXhbILDWKC4uT
 QBRPqyIe8BmL3VlXpw3mn7nbeU7rSfc/Rbrnm2+Yb54/Wtj4PnV6Z6bg7HO610im
 e/tBNHoaL7qn1iNYSC3heW11rToksd03/LK0GREvkX3Bl21T+Naaun/DY/PGIfMQ
 nOXy7uVo6sVdZnN2MTWof9qeMYBSlrwQVsMde6kbYadNcXnuqUqCOx41kiAdE8t5
 jfZy5QR+uDjdJgDv8/CuiCYxSjjTUfO1tdSV/VjsTK17Gfw3DWTJpeznVnoIALbZ
 81HXYxb+uGZ8xDr0WXGkydlnPvB6bnWu2vvfrLBkioA/p60EDNCtgKo1y3NzQGh8
 P2qILNhXIRrS2EoAScQOb6F1RPsvbDN9PbihnkShX3r7DXyeynr9jgPy3L2vf0bR
 xyu0jtQiqYb34ss7qqdz
 =IIsz
 -----END PGP SIGNATURE-----
Merge tag 'sound-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
 "This update contains a fairly wide range of changes all over in sound
  subdirectory, mainly because of UAPI header moves by David and __dev*
  annotation removals by Bill.  Other highlights are:
   - Introduced the support for wallclock timestamps in ALSA PCM core
   - Add the poll loop implementation for HD-audio jack detection
   - Yet more VGA-switcheroo fixes for HD-audio
   - New VIA HD-audio codec support
   - More fixes on resource management in USB audio and MIDI drivers
   - More quirks for USB-audio ASUS Xonar U3, Reloop Play, Focusrite,
     Roland VG-99, etc
   - Add support for FastTrack C400 usb-audio
   - Clean ups in many drivers regarding firmware loading
   - Add PSC724 Ultiimate Edge support to ice1712
   - A few hdspm driver updates
   - New Stanton SCS.1d/1m FireWire driver
   - Standardisation of the logging in ASoC codes
   - DT and dmaengine support for ASoC Atmel
   - Support for Wolfson ADSP cores
   - New drivers for Freescale/iVeia P1022 and Maxim MAX98090
   - Lots of other ASoC driver fixes and developments"
Fix up trivial conflicts.  And go out on a limb and assume the dts file
'status' field of one of the conflicting things was supposed to be
"disabled", not "disable" like in pretty much all other cases.
* tag 'sound-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (341 commits)
  ALSA: hda - Move runtime PM check to runtime_idle callback
  ALSA: hda - Add stereo-dmic fixup for Acer Aspire One 522
  ALSA: hda - Avoid doubly suspend after vga switcheroo
  ALSA: usb-audio: Enable S/PDIF on the ASUS Xonar U3
  ALSA: hda - Check validity of CORB/RIRB WP reads
  ALSA: hda - use usleep_range in link reset and change timeout check
  ALSA: HDA: VIA: Add support for codec VT1808.
  ALSA: HDA: VIA Add support for codec VT1705CF.
  ASoC: codecs: remove __dev* attributes
  ASoC: utils: remove __dev* attributes
  ASoC: ux500: remove __dev* attributes
  ASoC: txx9: remove __dev* attributes
  ASoC: tegra: remove __dev* attributes
  ASoC: spear: remove __dev* attributes
  ASoC: sh: remove __dev* attributes
  ASoC: s6000: remove __dev* attributes
  ASoC: OMAP: remove __dev* attributes
  ASoC: nuc900: remove __dev* attributes
  ASoC: mxs: remove __dev* attributes
  ASoC: kirkwood: remove __dev* attributes
  ...
		
	
			
		
			
				
	
	
		
			1543 lines
		
	
	
	
		
			39 KiB
			
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			1543 lines
		
	
	
	
		
			39 KiB
			
		
	
	
	
		
			C
		
	
	
	
	
	
| /*
 | |
|  * arch/arm/mach-at91/at91sam9263_devices.c
 | |
|  *
 | |
|  *  Copyright (C) 2007 Atmel Corporation.
 | |
|  *
 | |
|  * This program is free software; you can redistribute it and/or modify
 | |
|  * it under the terms of the GNU General Public License as published by
 | |
|  * the Free Software Foundation; either version 2 of the License, or
 | |
|  * (at your option) any later version.
 | |
|  *
 | |
|  */
 | |
| #include <asm/mach/arch.h>
 | |
| #include <asm/mach/map.h>
 | |
| 
 | |
| #include <linux/dma-mapping.h>
 | |
| #include <linux/gpio.h>
 | |
| #include <linux/platform_device.h>
 | |
| #include <linux/i2c-gpio.h>
 | |
| 
 | |
| #include <linux/fb.h>
 | |
| #include <video/atmel_lcdc.h>
 | |
| 
 | |
| #include <mach/at91sam9263.h>
 | |
| #include <mach/at91sam9263_matrix.h>
 | |
| #include <mach/at91_matrix.h>
 | |
| #include <mach/at91sam9_smc.h>
 | |
| 
 | |
| #include "board.h"
 | |
| #include "generic.h"
 | |
| 
 | |
| 
 | |
| /* --------------------------------------------------------------------
 | |
|  *  USB Host
 | |
|  * -------------------------------------------------------------------- */
 | |
| 
 | |
| #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
 | |
| static u64 ohci_dmamask = DMA_BIT_MASK(32);
 | |
| static struct at91_usbh_data usbh_data;
 | |
| 
 | |
| static struct resource usbh_resources[] = {
 | |
| 	[0] = {
 | |
| 		.start	= AT91SAM9263_UHP_BASE,
 | |
| 		.end	= AT91SAM9263_UHP_BASE + SZ_1M - 1,
 | |
| 		.flags	= IORESOURCE_MEM,
 | |
| 	},
 | |
| 	[1] = {
 | |
| 		.start	= NR_IRQS_LEGACY + AT91SAM9263_ID_UHP,
 | |
| 		.end	= NR_IRQS_LEGACY + AT91SAM9263_ID_UHP,
 | |
| 		.flags	= IORESOURCE_IRQ,
 | |
| 	},
 | |
| };
 | |
| 
 | |
| static struct platform_device at91_usbh_device = {
 | |
| 	.name		= "at91_ohci",
 | |
| 	.id		= -1,
 | |
| 	.dev		= {
 | |
| 				.dma_mask		= &ohci_dmamask,
 | |
| 				.coherent_dma_mask	= DMA_BIT_MASK(32),
 | |
| 				.platform_data		= &usbh_data,
 | |
| 	},
 | |
| 	.resource	= usbh_resources,
 | |
| 	.num_resources	= ARRAY_SIZE(usbh_resources),
 | |
| };
 | |
| 
 | |
| void __init at91_add_device_usbh(struct at91_usbh_data *data)
 | |
| {
 | |
| 	int i;
 | |
| 
 | |
| 	if (!data)
 | |
| 		return;
 | |
| 
 | |
| 	/* Enable VBus control for UHP ports */
 | |
| 	for (i = 0; i < data->ports; i++) {
 | |
| 		if (gpio_is_valid(data->vbus_pin[i]))
 | |
| 			at91_set_gpio_output(data->vbus_pin[i],
 | |
| 					     data->vbus_pin_active_low[i]);
 | |
| 	}
 | |
| 
 | |
| 	/* Enable overcurrent notification */
 | |
| 	for (i = 0; i < data->ports; i++) {
 | |
| 		if (gpio_is_valid(data->overcurrent_pin[i]))
 | |
| 			at91_set_gpio_input(data->overcurrent_pin[i], 1);
 | |
| 	}
 | |
| 
 | |
| 	usbh_data = *data;
 | |
| 	platform_device_register(&at91_usbh_device);
 | |
| }
 | |
| #else
 | |
| void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
 | |
| #endif
 | |
| 
 | |
| 
 | |
| /* --------------------------------------------------------------------
 | |
|  *  USB Device (Gadget)
 | |
|  * -------------------------------------------------------------------- */
 | |
| 
 | |
| #if defined(CONFIG_USB_AT91) || defined(CONFIG_USB_AT91_MODULE)
 | |
| static struct at91_udc_data udc_data;
 | |
| 
 | |
| static struct resource udc_resources[] = {
 | |
| 	[0] = {
 | |
| 		.start	= AT91SAM9263_BASE_UDP,
 | |
| 		.end	= AT91SAM9263_BASE_UDP + SZ_16K - 1,
 | |
| 		.flags	= IORESOURCE_MEM,
 | |
| 	},
 | |
| 	[1] = {
 | |
| 		.start	= NR_IRQS_LEGACY + AT91SAM9263_ID_UDP,
 | |
| 		.end	= NR_IRQS_LEGACY + AT91SAM9263_ID_UDP,
 | |
| 		.flags	= IORESOURCE_IRQ,
 | |
| 	},
 | |
| };
 | |
| 
 | |
| static struct platform_device at91_udc_device = {
 | |
| 	.name		= "at91_udc",
 | |
| 	.id		= -1,
 | |
| 	.dev		= {
 | |
| 				.platform_data		= &udc_data,
 | |
| 	},
 | |
| 	.resource	= udc_resources,
 | |
| 	.num_resources	= ARRAY_SIZE(udc_resources),
 | |
| };
 | |
| 
 | |
| void __init at91_add_device_udc(struct at91_udc_data *data)
 | |
| {
 | |
| 	if (!data)
 | |
| 		return;
 | |
| 
 | |
| 	if (gpio_is_valid(data->vbus_pin)) {
 | |
| 		at91_set_gpio_input(data->vbus_pin, 0);
 | |
| 		at91_set_deglitch(data->vbus_pin, 1);
 | |
| 	}
 | |
| 
 | |
| 	/* Pullup pin is handled internally by USB device peripheral */
 | |
| 
 | |
| 	udc_data = *data;
 | |
| 	platform_device_register(&at91_udc_device);
 | |
| }
 | |
| #else
 | |
| void __init at91_add_device_udc(struct at91_udc_data *data) {}
 | |
| #endif
 | |
| 
 | |
| 
 | |
| /* --------------------------------------------------------------------
 | |
|  *  Ethernet
 | |
|  * -------------------------------------------------------------------- */
 | |
| 
 | |
| #if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE)
 | |
| static u64 eth_dmamask = DMA_BIT_MASK(32);
 | |
| static struct macb_platform_data eth_data;
 | |
| 
 | |
| static struct resource eth_resources[] = {
 | |
| 	[0] = {
 | |
| 		.start	= AT91SAM9263_BASE_EMAC,
 | |
| 		.end	= AT91SAM9263_BASE_EMAC + SZ_16K - 1,
 | |
| 		.flags	= IORESOURCE_MEM,
 | |
| 	},
 | |
| 	[1] = {
 | |
| 		.start	= NR_IRQS_LEGACY + AT91SAM9263_ID_EMAC,
 | |
| 		.end	= NR_IRQS_LEGACY + AT91SAM9263_ID_EMAC,
 | |
| 		.flags	= IORESOURCE_IRQ,
 | |
| 	},
 | |
| };
 | |
| 
 | |
| static struct platform_device at91sam9263_eth_device = {
 | |
| 	.name		= "macb",
 | |
| 	.id		= -1,
 | |
| 	.dev		= {
 | |
| 				.dma_mask		= ð_dmamask,
 | |
| 				.coherent_dma_mask	= DMA_BIT_MASK(32),
 | |
| 				.platform_data		= ð_data,
 | |
| 	},
 | |
| 	.resource	= eth_resources,
 | |
| 	.num_resources	= ARRAY_SIZE(eth_resources),
 | |
| };
 | |
| 
 | |
| void __init at91_add_device_eth(struct macb_platform_data *data)
 | |
| {
 | |
| 	if (!data)
 | |
| 		return;
 | |
| 
 | |
| 	if (gpio_is_valid(data->phy_irq_pin)) {
 | |
| 		at91_set_gpio_input(data->phy_irq_pin, 0);
 | |
| 		at91_set_deglitch(data->phy_irq_pin, 1);
 | |
| 	}
 | |
| 
 | |
| 	/* Pins used for MII and RMII */
 | |
| 	at91_set_A_periph(AT91_PIN_PE21, 0);	/* ETXCK_EREFCK */
 | |
| 	at91_set_B_periph(AT91_PIN_PC25, 0);	/* ERXDV */
 | |
| 	at91_set_A_periph(AT91_PIN_PE25, 0);	/* ERX0 */
 | |
| 	at91_set_A_periph(AT91_PIN_PE26, 0);	/* ERX1 */
 | |
| 	at91_set_A_periph(AT91_PIN_PE27, 0);	/* ERXER */
 | |
| 	at91_set_A_periph(AT91_PIN_PE28, 0);	/* ETXEN */
 | |
| 	at91_set_A_periph(AT91_PIN_PE23, 0);	/* ETX0 */
 | |
| 	at91_set_A_periph(AT91_PIN_PE24, 0);	/* ETX1 */
 | |
| 	at91_set_A_periph(AT91_PIN_PE30, 0);	/* EMDIO */
 | |
| 	at91_set_A_periph(AT91_PIN_PE29, 0);	/* EMDC */
 | |
| 
 | |
| 	if (!data->is_rmii) {
 | |
| 		at91_set_A_periph(AT91_PIN_PE22, 0);	/* ECRS */
 | |
| 		at91_set_B_periph(AT91_PIN_PC26, 0);	/* ECOL */
 | |
| 		at91_set_B_periph(AT91_PIN_PC22, 0);	/* ERX2 */
 | |
| 		at91_set_B_periph(AT91_PIN_PC23, 0);	/* ERX3 */
 | |
| 		at91_set_B_periph(AT91_PIN_PC27, 0);	/* ERXCK */
 | |
| 		at91_set_B_periph(AT91_PIN_PC20, 0);	/* ETX2 */
 | |
| 		at91_set_B_periph(AT91_PIN_PC21, 0);	/* ETX3 */
 | |
| 		at91_set_B_periph(AT91_PIN_PC24, 0);	/* ETXER */
 | |
| 	}
 | |
| 
 | |
| 	eth_data = *data;
 | |
| 	platform_device_register(&at91sam9263_eth_device);
 | |
| }
 | |
| #else
 | |
| void __init at91_add_device_eth(struct macb_platform_data *data) {}
 | |
| #endif
 | |
| 
 | |
| 
 | |
| /* --------------------------------------------------------------------
 | |
|  *  MMC / SD
 | |
|  * -------------------------------------------------------------------- */
 | |
| 
 | |
| #if IS_ENABLED(CONFIG_MMC_ATMELMCI)
 | |
| static u64 mmc_dmamask = DMA_BIT_MASK(32);
 | |
| static struct mci_platform_data mmc0_data, mmc1_data;
 | |
| 
 | |
| static struct resource mmc0_resources[] = {
 | |
| 	[0] = {
 | |
| 		.start	= AT91SAM9263_BASE_MCI0,
 | |
| 		.end	= AT91SAM9263_BASE_MCI0 + SZ_16K - 1,
 | |
| 		.flags	= IORESOURCE_MEM,
 | |
| 	},
 | |
| 	[1] = {
 | |
| 		.start	= NR_IRQS_LEGACY + AT91SAM9263_ID_MCI0,
 | |
| 		.end	= NR_IRQS_LEGACY + AT91SAM9263_ID_MCI0,
 | |
| 		.flags	= IORESOURCE_IRQ,
 | |
| 	},
 | |
| };
 | |
| 
 | |
| static struct platform_device at91sam9263_mmc0_device = {
 | |
| 	.name		= "atmel_mci",
 | |
| 	.id		= 0,
 | |
| 	.dev		= {
 | |
| 				.dma_mask		= &mmc_dmamask,
 | |
| 				.coherent_dma_mask	= DMA_BIT_MASK(32),
 | |
| 				.platform_data		= &mmc0_data,
 | |
| 	},
 | |
| 	.resource	= mmc0_resources,
 | |
| 	.num_resources	= ARRAY_SIZE(mmc0_resources),
 | |
| };
 | |
| 
 | |
| static struct resource mmc1_resources[] = {
 | |
| 	[0] = {
 | |
| 		.start	= AT91SAM9263_BASE_MCI1,
 | |
| 		.end	= AT91SAM9263_BASE_MCI1 + SZ_16K - 1,
 | |
| 		.flags	= IORESOURCE_MEM,
 | |
| 	},
 | |
| 	[1] = {
 | |
| 		.start	= NR_IRQS_LEGACY + AT91SAM9263_ID_MCI1,
 | |
| 		.end	= NR_IRQS_LEGACY + AT91SAM9263_ID_MCI1,
 | |
| 		.flags	= IORESOURCE_IRQ,
 | |
| 	},
 | |
| };
 | |
| 
 | |
| static struct platform_device at91sam9263_mmc1_device = {
 | |
| 	.name		= "atmel_mci",
 | |
| 	.id		= 1,
 | |
| 	.dev		= {
 | |
| 				.dma_mask		= &mmc_dmamask,
 | |
| 				.coherent_dma_mask	= DMA_BIT_MASK(32),
 | |
| 				.platform_data		= &mmc1_data,
 | |
| 	},
 | |
| 	.resource	= mmc1_resources,
 | |
| 	.num_resources	= ARRAY_SIZE(mmc1_resources),
 | |
| };
 | |
| 
 | |
| void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data)
 | |
| {
 | |
| 	unsigned int i;
 | |
| 	unsigned int slot_count = 0;
 | |
| 
 | |
| 	if (!data)
 | |
| 		return;
 | |
| 
 | |
| 	for (i = 0; i < ATMCI_MAX_NR_SLOTS; i++) {
 | |
| 
 | |
| 		if (!data->slot[i].bus_width)
 | |
| 			continue;
 | |
| 
 | |
| 		/* input/irq */
 | |
| 		if (gpio_is_valid(data->slot[i].detect_pin)) {
 | |
| 			at91_set_gpio_input(data->slot[i].detect_pin,
 | |
| 					1);
 | |
| 			at91_set_deglitch(data->slot[i].detect_pin,
 | |
| 					1);
 | |
| 		}
 | |
| 		if (gpio_is_valid(data->slot[i].wp_pin))
 | |
| 			at91_set_gpio_input(data->slot[i].wp_pin, 1);
 | |
| 
 | |
| 		if (mmc_id == 0) {				/* MCI0 */
 | |
| 			switch (i) {
 | |
| 			case 0:					/* slot A */
 | |
| 				/* CMD */
 | |
| 				at91_set_A_periph(AT91_PIN_PA1, 1);
 | |
| 				/* DAT0, maybe DAT1..DAT3 */
 | |
| 				at91_set_A_periph(AT91_PIN_PA0, 1);
 | |
| 				if (data->slot[i].bus_width == 4) {
 | |
| 					at91_set_A_periph(AT91_PIN_PA3, 1);
 | |
| 					at91_set_A_periph(AT91_PIN_PA4, 1);
 | |
| 					at91_set_A_periph(AT91_PIN_PA5, 1);
 | |
| 				}
 | |
| 				slot_count++;
 | |
| 				break;
 | |
| 			case 1:					/* slot B */
 | |
| 				/* CMD */
 | |
| 				at91_set_A_periph(AT91_PIN_PA16, 1);
 | |
| 				/* DAT0, maybe DAT1..DAT3 */
 | |
| 				at91_set_A_periph(AT91_PIN_PA17, 1);
 | |
| 				if (data->slot[i].bus_width == 4) {
 | |
| 					at91_set_A_periph(AT91_PIN_PA18, 1);
 | |
| 					at91_set_A_periph(AT91_PIN_PA19, 1);
 | |
| 					at91_set_A_periph(AT91_PIN_PA20, 1);
 | |
| 				}
 | |
| 				slot_count++;
 | |
| 				break;
 | |
| 			default:
 | |
| 				printk(KERN_ERR
 | |
| 				       "AT91: SD/MMC slot %d not available\n", i);
 | |
| 				break;
 | |
| 			}
 | |
| 			if (slot_count) {
 | |
| 				/* CLK */
 | |
| 				at91_set_A_periph(AT91_PIN_PA12, 0);
 | |
| 
 | |
| 				mmc0_data = *data;
 | |
| 				platform_device_register(&at91sam9263_mmc0_device);
 | |
| 			}
 | |
| 		} else if (mmc_id == 1) {			/* MCI1 */
 | |
| 			switch (i) {
 | |
| 			case 0:					/* slot A */
 | |
| 				/* CMD */
 | |
| 				at91_set_A_periph(AT91_PIN_PA7, 1);
 | |
| 				/* DAT0, maybe DAT1..DAT3 */
 | |
| 				at91_set_A_periph(AT91_PIN_PA8, 1);
 | |
| 				if (data->slot[i].bus_width == 4) {
 | |
| 					at91_set_A_periph(AT91_PIN_PA9, 1);
 | |
| 					at91_set_A_periph(AT91_PIN_PA10, 1);
 | |
| 					at91_set_A_periph(AT91_PIN_PA11, 1);
 | |
| 				}
 | |
| 				slot_count++;
 | |
| 				break;
 | |
| 			case 1:					/* slot B */
 | |
| 				/* CMD */
 | |
| 				at91_set_A_periph(AT91_PIN_PA21, 1);
 | |
| 				/* DAT0, maybe DAT1..DAT3 */
 | |
| 				at91_set_A_periph(AT91_PIN_PA22, 1);
 | |
| 				if (data->slot[i].bus_width == 4) {
 | |
| 					at91_set_A_periph(AT91_PIN_PA23, 1);
 | |
| 					at91_set_A_periph(AT91_PIN_PA24, 1);
 | |
| 					at91_set_A_periph(AT91_PIN_PA25, 1);
 | |
| 				}
 | |
| 				slot_count++;
 | |
| 				break;
 | |
| 			default:
 | |
| 				printk(KERN_ERR
 | |
| 				       "AT91: SD/MMC slot %d not available\n", i);
 | |
| 				break;
 | |
| 			}
 | |
| 			if (slot_count) {
 | |
| 				/* CLK */
 | |
| 				at91_set_A_periph(AT91_PIN_PA6, 0);
 | |
| 
 | |
| 				mmc1_data = *data;
 | |
| 				platform_device_register(&at91sam9263_mmc1_device);
 | |
| 			}
 | |
| 		}
 | |
| 	}
 | |
| }
 | |
| #else
 | |
| void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data) {}
 | |
| #endif
 | |
| 
 | |
| /* --------------------------------------------------------------------
 | |
|  *  Compact Flash (PCMCIA or IDE)
 | |
|  * -------------------------------------------------------------------- */
 | |
| 
 | |
| #if defined(CONFIG_PATA_AT91) || defined(CONFIG_PATA_AT91_MODULE) || \
 | |
| 	defined(CONFIG_AT91_CF) || defined(CONFIG_AT91_CF_MODULE)
 | |
| 
 | |
| static struct at91_cf_data cf0_data;
 | |
| 
 | |
| static struct resource cf0_resources[] = {
 | |
| 	[0] = {
 | |
| 		.start	= AT91_CHIPSELECT_4,
 | |
| 		.end	= AT91_CHIPSELECT_4 + SZ_256M - 1,
 | |
| 		.flags	= IORESOURCE_MEM | IORESOURCE_MEM_8AND16BIT,
 | |
| 	}
 | |
| };
 | |
| 
 | |
| static struct platform_device cf0_device = {
 | |
| 	.id		= 0,
 | |
| 	.dev		= {
 | |
| 				.platform_data	= &cf0_data,
 | |
| 	},
 | |
| 	.resource	= cf0_resources,
 | |
| 	.num_resources	= ARRAY_SIZE(cf0_resources),
 | |
| };
 | |
| 
 | |
| static struct at91_cf_data cf1_data;
 | |
| 
 | |
| static struct resource cf1_resources[] = {
 | |
| 	[0] = {
 | |
| 		.start	= AT91_CHIPSELECT_5,
 | |
| 		.end	= AT91_CHIPSELECT_5 + SZ_256M - 1,
 | |
| 		.flags	= IORESOURCE_MEM | IORESOURCE_MEM_8AND16BIT,
 | |
| 	}
 | |
| };
 | |
| 
 | |
| static struct platform_device cf1_device = {
 | |
| 	.id		= 1,
 | |
| 	.dev		= {
 | |
| 				.platform_data	= &cf1_data,
 | |
| 	},
 | |
| 	.resource	= cf1_resources,
 | |
| 	.num_resources	= ARRAY_SIZE(cf1_resources),
 | |
| };
 | |
| 
 | |
| void __init at91_add_device_cf(struct at91_cf_data *data)
 | |
| {
 | |
| 	unsigned long ebi0_csa;
 | |
| 	struct platform_device *pdev;
 | |
| 
 | |
| 	if (!data)
 | |
| 		return;
 | |
| 
 | |
| 	/*
 | |
| 	 * assign CS4 or CS5 to SMC with Compact Flash logic support,
 | |
| 	 * we assume SMC timings are configured by board code,
 | |
| 	 * except True IDE where timings are controlled by driver
 | |
| 	 */
 | |
| 	ebi0_csa = at91_matrix_read(AT91_MATRIX_EBI0CSA);
 | |
| 	switch (data->chipselect) {
 | |
| 	case 4:
 | |
| 		at91_set_A_periph(AT91_PIN_PD6, 0);  /* EBI0_NCS4/CFCS0 */
 | |
| 		ebi0_csa |= AT91_MATRIX_EBI0_CS4A_SMC_CF1;
 | |
| 		cf0_data = *data;
 | |
| 		pdev = &cf0_device;
 | |
| 		break;
 | |
| 	case 5:
 | |
| 		at91_set_A_periph(AT91_PIN_PD7, 0);  /* EBI0_NCS5/CFCS1 */
 | |
| 		ebi0_csa |= AT91_MATRIX_EBI0_CS5A_SMC_CF2;
 | |
| 		cf1_data = *data;
 | |
| 		pdev = &cf1_device;
 | |
| 		break;
 | |
| 	default:
 | |
| 		printk(KERN_ERR "AT91 CF: bad chip-select requested (%u)\n",
 | |
| 		       data->chipselect);
 | |
| 		return;
 | |
| 	}
 | |
| 	at91_matrix_write(AT91_MATRIX_EBI0CSA, ebi0_csa);
 | |
| 
 | |
| 	if (gpio_is_valid(data->det_pin)) {
 | |
| 		at91_set_gpio_input(data->det_pin, 1);
 | |
| 		at91_set_deglitch(data->det_pin, 1);
 | |
| 	}
 | |
| 
 | |
| 	if (gpio_is_valid(data->irq_pin)) {
 | |
| 		at91_set_gpio_input(data->irq_pin, 1);
 | |
| 		at91_set_deglitch(data->irq_pin, 1);
 | |
| 	}
 | |
| 
 | |
| 	if (gpio_is_valid(data->vcc_pin))
 | |
| 		/* initially off */
 | |
| 		at91_set_gpio_output(data->vcc_pin, 0);
 | |
| 
 | |
| 	/* enable EBI controlled pins */
 | |
| 	at91_set_A_periph(AT91_PIN_PD5, 1);  /* NWAIT */
 | |
| 	at91_set_A_periph(AT91_PIN_PD8, 0);  /* CFCE1 */
 | |
| 	at91_set_A_periph(AT91_PIN_PD9, 0);  /* CFCE2 */
 | |
| 	at91_set_A_periph(AT91_PIN_PD14, 0); /* CFNRW */
 | |
| 
 | |
| 	pdev->name = (data->flags & AT91_CF_TRUE_IDE) ? "pata_at91" : "at91_cf";
 | |
| 	platform_device_register(pdev);
 | |
| }
 | |
| #else
 | |
| void __init at91_add_device_cf(struct at91_cf_data *data) {}
 | |
| #endif
 | |
| 
 | |
| /* --------------------------------------------------------------------
 | |
|  *  NAND / SmartMedia
 | |
|  * -------------------------------------------------------------------- */
 | |
| 
 | |
| #if defined(CONFIG_MTD_NAND_ATMEL) || defined(CONFIG_MTD_NAND_ATMEL_MODULE)
 | |
| static struct atmel_nand_data nand_data;
 | |
| 
 | |
| #define NAND_BASE	AT91_CHIPSELECT_3
 | |
| 
 | |
| static struct resource nand_resources[] = {
 | |
| 	[0] = {
 | |
| 		.start	= NAND_BASE,
 | |
| 		.end	= NAND_BASE + SZ_256M - 1,
 | |
| 		.flags	= IORESOURCE_MEM,
 | |
| 	},
 | |
| 	[1] = {
 | |
| 		.start	= AT91SAM9263_BASE_ECC0,
 | |
| 		.end	= AT91SAM9263_BASE_ECC0 + SZ_512 - 1,
 | |
| 		.flags	= IORESOURCE_MEM,
 | |
| 	}
 | |
| };
 | |
| 
 | |
| static struct platform_device at91sam9263_nand_device = {
 | |
| 	.name		= "atmel_nand",
 | |
| 	.id		= -1,
 | |
| 	.dev		= {
 | |
| 				.platform_data	= &nand_data,
 | |
| 	},
 | |
| 	.resource	= nand_resources,
 | |
| 	.num_resources	= ARRAY_SIZE(nand_resources),
 | |
| };
 | |
| 
 | |
| void __init at91_add_device_nand(struct atmel_nand_data *data)
 | |
| {
 | |
| 	unsigned long csa;
 | |
| 
 | |
| 	if (!data)
 | |
| 		return;
 | |
| 
 | |
| 	csa = at91_matrix_read(AT91_MATRIX_EBI0CSA);
 | |
| 	at91_matrix_write(AT91_MATRIX_EBI0CSA, csa | AT91_MATRIX_EBI0_CS3A_SMC_SMARTMEDIA);
 | |
| 
 | |
| 	/* enable pin */
 | |
| 	if (gpio_is_valid(data->enable_pin))
 | |
| 		at91_set_gpio_output(data->enable_pin, 1);
 | |
| 
 | |
| 	/* ready/busy pin */
 | |
| 	if (gpio_is_valid(data->rdy_pin))
 | |
| 		at91_set_gpio_input(data->rdy_pin, 1);
 | |
| 
 | |
| 	/* card detect pin */
 | |
| 	if (gpio_is_valid(data->det_pin))
 | |
| 		at91_set_gpio_input(data->det_pin, 1);
 | |
| 
 | |
| 	nand_data = *data;
 | |
| 	platform_device_register(&at91sam9263_nand_device);
 | |
| }
 | |
| #else
 | |
| void __init at91_add_device_nand(struct atmel_nand_data *data) {}
 | |
| #endif
 | |
| 
 | |
| 
 | |
| /* --------------------------------------------------------------------
 | |
|  *  TWI (i2c)
 | |
|  * -------------------------------------------------------------------- */
 | |
| 
 | |
| /*
 | |
|  * Prefer the GPIO code since the TWI controller isn't robust
 | |
|  * (gets overruns and underruns under load) and can only issue
 | |
|  * repeated STARTs in one scenario (the driver doesn't yet handle them).
 | |
|  */
 | |
| #if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
 | |
| 
 | |
| static struct i2c_gpio_platform_data pdata = {
 | |
| 	.sda_pin		= AT91_PIN_PB4,
 | |
| 	.sda_is_open_drain	= 1,
 | |
| 	.scl_pin		= AT91_PIN_PB5,
 | |
| 	.scl_is_open_drain	= 1,
 | |
| 	.udelay			= 2,		/* ~100 kHz */
 | |
| };
 | |
| 
 | |
| static struct platform_device at91sam9263_twi_device = {
 | |
| 	.name			= "i2c-gpio",
 | |
| 	.id			= 0,
 | |
| 	.dev.platform_data	= &pdata,
 | |
| };
 | |
| 
 | |
| void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
 | |
| {
 | |
| 	at91_set_GPIO_periph(AT91_PIN_PB4, 1);		/* TWD (SDA) */
 | |
| 	at91_set_multi_drive(AT91_PIN_PB4, 1);
 | |
| 
 | |
| 	at91_set_GPIO_periph(AT91_PIN_PB5, 1);		/* TWCK (SCL) */
 | |
| 	at91_set_multi_drive(AT91_PIN_PB5, 1);
 | |
| 
 | |
| 	i2c_register_board_info(0, devices, nr_devices);
 | |
| 	platform_device_register(&at91sam9263_twi_device);
 | |
| }
 | |
| 
 | |
| #elif defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
 | |
| 
 | |
| static struct resource twi_resources[] = {
 | |
| 	[0] = {
 | |
| 		.start	= AT91SAM9263_BASE_TWI,
 | |
| 		.end	= AT91SAM9263_BASE_TWI + SZ_16K - 1,
 | |
| 		.flags	= IORESOURCE_MEM,
 | |
| 	},
 | |
| 	[1] = {
 | |
| 		.start	= NR_IRQS_LEGACY + AT91SAM9263_ID_TWI,
 | |
| 		.end	= NR_IRQS_LEGACY + AT91SAM9263_ID_TWI,
 | |
| 		.flags	= IORESOURCE_IRQ,
 | |
| 	},
 | |
| };
 | |
| 
 | |
| static struct platform_device at91sam9263_twi_device = {
 | |
| 	.name		= "i2c-at91sam9260",
 | |
| 	.id		= 0,
 | |
| 	.resource	= twi_resources,
 | |
| 	.num_resources	= ARRAY_SIZE(twi_resources),
 | |
| };
 | |
| 
 | |
| void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
 | |
| {
 | |
| 	/* pins used for TWI interface */
 | |
| 	at91_set_A_periph(AT91_PIN_PB4, 0);		/* TWD */
 | |
| 	at91_set_multi_drive(AT91_PIN_PB4, 1);
 | |
| 
 | |
| 	at91_set_A_periph(AT91_PIN_PB5, 0);		/* TWCK */
 | |
| 	at91_set_multi_drive(AT91_PIN_PB5, 1);
 | |
| 
 | |
| 	i2c_register_board_info(0, devices, nr_devices);
 | |
| 	platform_device_register(&at91sam9263_twi_device);
 | |
| }
 | |
| #else
 | |
| void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) {}
 | |
| #endif
 | |
| 
 | |
| 
 | |
| /* --------------------------------------------------------------------
 | |
|  *  SPI
 | |
|  * -------------------------------------------------------------------- */
 | |
| 
 | |
| #if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
 | |
| static u64 spi_dmamask = DMA_BIT_MASK(32);
 | |
| 
 | |
| static struct resource spi0_resources[] = {
 | |
| 	[0] = {
 | |
| 		.start	= AT91SAM9263_BASE_SPI0,
 | |
| 		.end	= AT91SAM9263_BASE_SPI0 + SZ_16K - 1,
 | |
| 		.flags	= IORESOURCE_MEM,
 | |
| 	},
 | |
| 	[1] = {
 | |
| 		.start	= NR_IRQS_LEGACY + AT91SAM9263_ID_SPI0,
 | |
| 		.end	= NR_IRQS_LEGACY + AT91SAM9263_ID_SPI0,
 | |
| 		.flags	= IORESOURCE_IRQ,
 | |
| 	},
 | |
| };
 | |
| 
 | |
| static struct platform_device at91sam9263_spi0_device = {
 | |
| 	.name		= "atmel_spi",
 | |
| 	.id		= 0,
 | |
| 	.dev		= {
 | |
| 				.dma_mask		= &spi_dmamask,
 | |
| 				.coherent_dma_mask	= DMA_BIT_MASK(32),
 | |
| 	},
 | |
| 	.resource	= spi0_resources,
 | |
| 	.num_resources	= ARRAY_SIZE(spi0_resources),
 | |
| };
 | |
| 
 | |
| static const unsigned spi0_standard_cs[4] = { AT91_PIN_PA5, AT91_PIN_PA3, AT91_PIN_PA4, AT91_PIN_PB11 };
 | |
| 
 | |
| static struct resource spi1_resources[] = {
 | |
| 	[0] = {
 | |
| 		.start	= AT91SAM9263_BASE_SPI1,
 | |
| 		.end	= AT91SAM9263_BASE_SPI1 + SZ_16K - 1,
 | |
| 		.flags	= IORESOURCE_MEM,
 | |
| 	},
 | |
| 	[1] = {
 | |
| 		.start	= NR_IRQS_LEGACY + AT91SAM9263_ID_SPI1,
 | |
| 		.end	= NR_IRQS_LEGACY + AT91SAM9263_ID_SPI1,
 | |
| 		.flags	= IORESOURCE_IRQ,
 | |
| 	},
 | |
| };
 | |
| 
 | |
| static struct platform_device at91sam9263_spi1_device = {
 | |
| 	.name		= "atmel_spi",
 | |
| 	.id		= 1,
 | |
| 	.dev		= {
 | |
| 				.dma_mask		= &spi_dmamask,
 | |
| 				.coherent_dma_mask	= DMA_BIT_MASK(32),
 | |
| 	},
 | |
| 	.resource	= spi1_resources,
 | |
| 	.num_resources	= ARRAY_SIZE(spi1_resources),
 | |
| };
 | |
| 
 | |
| static const unsigned spi1_standard_cs[4] = { AT91_PIN_PB15, AT91_PIN_PB16, AT91_PIN_PB17, AT91_PIN_PB18 };
 | |
| 
 | |
| void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
 | |
| {
 | |
| 	int i;
 | |
| 	unsigned long cs_pin;
 | |
| 	short enable_spi0 = 0;
 | |
| 	short enable_spi1 = 0;
 | |
| 
 | |
| 	/* Choose SPI chip-selects */
 | |
| 	for (i = 0; i < nr_devices; i++) {
 | |
| 		if (devices[i].controller_data)
 | |
| 			cs_pin = (unsigned long) devices[i].controller_data;
 | |
| 		else if (devices[i].bus_num == 0)
 | |
| 			cs_pin = spi0_standard_cs[devices[i].chip_select];
 | |
| 		else
 | |
| 			cs_pin = spi1_standard_cs[devices[i].chip_select];
 | |
| 
 | |
| 		if (!gpio_is_valid(cs_pin))
 | |
| 			continue;
 | |
| 
 | |
| 		if (devices[i].bus_num == 0)
 | |
| 			enable_spi0 = 1;
 | |
| 		else
 | |
| 			enable_spi1 = 1;
 | |
| 
 | |
| 		/* enable chip-select pin */
 | |
| 		at91_set_gpio_output(cs_pin, 1);
 | |
| 
 | |
| 		/* pass chip-select pin to driver */
 | |
| 		devices[i].controller_data = (void *) cs_pin;
 | |
| 	}
 | |
| 
 | |
| 	spi_register_board_info(devices, nr_devices);
 | |
| 
 | |
| 	/* Configure SPI bus(es) */
 | |
| 	if (enable_spi0) {
 | |
| 		at91_set_B_periph(AT91_PIN_PA0, 0);	/* SPI0_MISO */
 | |
| 		at91_set_B_periph(AT91_PIN_PA1, 0);	/* SPI0_MOSI */
 | |
| 		at91_set_B_periph(AT91_PIN_PA2, 0);	/* SPI0_SPCK */
 | |
| 
 | |
| 		platform_device_register(&at91sam9263_spi0_device);
 | |
| 	}
 | |
| 	if (enable_spi1) {
 | |
| 		at91_set_A_periph(AT91_PIN_PB12, 0);	/* SPI1_MISO */
 | |
| 		at91_set_A_periph(AT91_PIN_PB13, 0);	/* SPI1_MOSI */
 | |
| 		at91_set_A_periph(AT91_PIN_PB14, 0);	/* SPI1_SPCK */
 | |
| 
 | |
| 		platform_device_register(&at91sam9263_spi1_device);
 | |
| 	}
 | |
| }
 | |
| #else
 | |
| void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {}
 | |
| #endif
 | |
| 
 | |
| 
 | |
| /* --------------------------------------------------------------------
 | |
|  *  AC97
 | |
|  * -------------------------------------------------------------------- */
 | |
| 
 | |
| #if defined(CONFIG_SND_ATMEL_AC97C) || defined(CONFIG_SND_ATMEL_AC97C_MODULE)
 | |
| static u64 ac97_dmamask = DMA_BIT_MASK(32);
 | |
| static struct ac97c_platform_data ac97_data;
 | |
| 
 | |
| static struct resource ac97_resources[] = {
 | |
| 	[0] = {
 | |
| 		.start	= AT91SAM9263_BASE_AC97C,
 | |
| 		.end	= AT91SAM9263_BASE_AC97C + SZ_16K - 1,
 | |
| 		.flags	= IORESOURCE_MEM,
 | |
| 	},
 | |
| 	[1] = {
 | |
| 		.start	= NR_IRQS_LEGACY + AT91SAM9263_ID_AC97C,
 | |
| 		.end	= NR_IRQS_LEGACY + AT91SAM9263_ID_AC97C,
 | |
| 		.flags	= IORESOURCE_IRQ,
 | |
| 	},
 | |
| };
 | |
| 
 | |
| static struct platform_device at91sam9263_ac97_device = {
 | |
| 	.name		= "atmel_ac97c",
 | |
| 	.id		= 0,
 | |
| 	.dev		= {
 | |
| 				.dma_mask		= &ac97_dmamask,
 | |
| 				.coherent_dma_mask	= DMA_BIT_MASK(32),
 | |
| 				.platform_data		= &ac97_data,
 | |
| 	},
 | |
| 	.resource	= ac97_resources,
 | |
| 	.num_resources	= ARRAY_SIZE(ac97_resources),
 | |
| };
 | |
| 
 | |
| void __init at91_add_device_ac97(struct ac97c_platform_data *data)
 | |
| {
 | |
| 	if (!data)
 | |
| 		return;
 | |
| 
 | |
| 	at91_set_A_periph(AT91_PIN_PB0, 0);	/* AC97FS */
 | |
| 	at91_set_A_periph(AT91_PIN_PB1, 0);	/* AC97CK */
 | |
| 	at91_set_A_periph(AT91_PIN_PB2, 0);	/* AC97TX */
 | |
| 	at91_set_A_periph(AT91_PIN_PB3, 0);	/* AC97RX */
 | |
| 
 | |
| 	/* reset */
 | |
| 	if (gpio_is_valid(data->reset_pin))
 | |
| 		at91_set_gpio_output(data->reset_pin, 0);
 | |
| 
 | |
| 	ac97_data = *data;
 | |
| 	platform_device_register(&at91sam9263_ac97_device);
 | |
| }
 | |
| #else
 | |
| void __init at91_add_device_ac97(struct ac97c_platform_data *data) {}
 | |
| #endif
 | |
| 
 | |
| /* --------------------------------------------------------------------
 | |
|  *  CAN Controller
 | |
|  * -------------------------------------------------------------------- */
 | |
| 
 | |
| #if defined(CONFIG_CAN_AT91) || defined(CONFIG_CAN_AT91_MODULE)
 | |
| static struct resource can_resources[] = {
 | |
| 	[0] = {
 | |
| 		.start	= AT91SAM9263_BASE_CAN,
 | |
| 		.end	= AT91SAM9263_BASE_CAN + SZ_16K - 1,
 | |
| 		.flags	= IORESOURCE_MEM,
 | |
| 	},
 | |
| 	[1] = {
 | |
| 		.start	= NR_IRQS_LEGACY + AT91SAM9263_ID_CAN,
 | |
| 		.end	= NR_IRQS_LEGACY + AT91SAM9263_ID_CAN,
 | |
| 		.flags	= IORESOURCE_IRQ,
 | |
| 	},
 | |
| };
 | |
| 
 | |
| static struct platform_device at91sam9263_can_device = {
 | |
| 	.name		= "at91_can",
 | |
| 	.id		= -1,
 | |
| 	.resource	= can_resources,
 | |
| 	.num_resources	= ARRAY_SIZE(can_resources),
 | |
| };
 | |
| 
 | |
| void __init at91_add_device_can(struct at91_can_data *data)
 | |
| {
 | |
| 	at91_set_A_periph(AT91_PIN_PA13, 0);	/* CANTX */
 | |
| 	at91_set_A_periph(AT91_PIN_PA14, 0);	/* CANRX */
 | |
| 	at91sam9263_can_device.dev.platform_data = data;
 | |
| 
 | |
| 	platform_device_register(&at91sam9263_can_device);
 | |
| }
 | |
| #else
 | |
| void __init at91_add_device_can(struct at91_can_data *data) {}
 | |
| #endif
 | |
| 
 | |
| /* --------------------------------------------------------------------
 | |
|  *  LCD Controller
 | |
|  * -------------------------------------------------------------------- */
 | |
| 
 | |
| #if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
 | |
| static u64 lcdc_dmamask = DMA_BIT_MASK(32);
 | |
| static struct atmel_lcdfb_info lcdc_data;
 | |
| 
 | |
| static struct resource lcdc_resources[] = {
 | |
| 	[0] = {
 | |
| 		.start	= AT91SAM9263_LCDC_BASE,
 | |
| 		.end	= AT91SAM9263_LCDC_BASE + SZ_4K - 1,
 | |
| 		.flags	= IORESOURCE_MEM,
 | |
| 	},
 | |
| 	[1] = {
 | |
| 		.start	= NR_IRQS_LEGACY + AT91SAM9263_ID_LCDC,
 | |
| 		.end	= NR_IRQS_LEGACY + AT91SAM9263_ID_LCDC,
 | |
| 		.flags	= IORESOURCE_IRQ,
 | |
| 	},
 | |
| };
 | |
| 
 | |
| static struct platform_device at91_lcdc_device = {
 | |
| 	.name		= "atmel_lcdfb",
 | |
| 	.id		= 0,
 | |
| 	.dev		= {
 | |
| 				.dma_mask		= &lcdc_dmamask,
 | |
| 				.coherent_dma_mask	= DMA_BIT_MASK(32),
 | |
| 				.platform_data		= &lcdc_data,
 | |
| 	},
 | |
| 	.resource	= lcdc_resources,
 | |
| 	.num_resources	= ARRAY_SIZE(lcdc_resources),
 | |
| };
 | |
| 
 | |
| void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data)
 | |
| {
 | |
| 	if (!data)
 | |
| 		return;
 | |
| 
 | |
| 	at91_set_A_periph(AT91_PIN_PC1, 0);	/* LCDHSYNC */
 | |
| 	at91_set_A_periph(AT91_PIN_PC2, 0);	/* LCDDOTCK */
 | |
| 	at91_set_A_periph(AT91_PIN_PC3, 0);	/* LCDDEN */
 | |
| 	at91_set_B_periph(AT91_PIN_PB9, 0);	/* LCDCC */
 | |
| 	at91_set_A_periph(AT91_PIN_PC6, 0);	/* LCDD2 */
 | |
| 	at91_set_A_periph(AT91_PIN_PC7, 0);	/* LCDD3 */
 | |
| 	at91_set_A_periph(AT91_PIN_PC8, 0);	/* LCDD4 */
 | |
| 	at91_set_A_periph(AT91_PIN_PC9, 0);	/* LCDD5 */
 | |
| 	at91_set_A_periph(AT91_PIN_PC10, 0);	/* LCDD6 */
 | |
| 	at91_set_A_periph(AT91_PIN_PC11, 0);	/* LCDD7 */
 | |
| 	at91_set_A_periph(AT91_PIN_PC14, 0);	/* LCDD10 */
 | |
| 	at91_set_A_periph(AT91_PIN_PC15, 0);	/* LCDD11 */
 | |
| 	at91_set_A_periph(AT91_PIN_PC16, 0);	/* LCDD12 */
 | |
| 	at91_set_B_periph(AT91_PIN_PC12, 0);	/* LCDD13 */
 | |
| 	at91_set_A_periph(AT91_PIN_PC18, 0);	/* LCDD14 */
 | |
| 	at91_set_A_periph(AT91_PIN_PC19, 0);	/* LCDD15 */
 | |
| 	at91_set_A_periph(AT91_PIN_PC22, 0);	/* LCDD18 */
 | |
| 	at91_set_A_periph(AT91_PIN_PC23, 0);	/* LCDD19 */
 | |
| 	at91_set_A_periph(AT91_PIN_PC24, 0);	/* LCDD20 */
 | |
| 	at91_set_B_periph(AT91_PIN_PC17, 0);	/* LCDD21 */
 | |
| 	at91_set_A_periph(AT91_PIN_PC26, 0);	/* LCDD22 */
 | |
| 	at91_set_A_periph(AT91_PIN_PC27, 0);	/* LCDD23 */
 | |
| 
 | |
| 	lcdc_data = *data;
 | |
| 	platform_device_register(&at91_lcdc_device);
 | |
| }
 | |
| #else
 | |
| void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) {}
 | |
| #endif
 | |
| 
 | |
| 
 | |
| /* --------------------------------------------------------------------
 | |
|  *  Image Sensor Interface
 | |
|  * -------------------------------------------------------------------- */
 | |
| 
 | |
| #if defined(CONFIG_VIDEO_AT91_ISI) || defined(CONFIG_VIDEO_AT91_ISI_MODULE)
 | |
| 
 | |
| struct resource isi_resources[] = {
 | |
| 	[0] = {
 | |
| 		.start	= AT91SAM9263_BASE_ISI,
 | |
| 		.end	= AT91SAM9263_BASE_ISI + SZ_16K - 1,
 | |
| 		.flags	= IORESOURCE_MEM,
 | |
| 	},
 | |
| 	[1] = {
 | |
| 		.start	= NR_IRQS_LEGACY + AT91SAM9263_ID_ISI,
 | |
| 		.end	= NR_IRQS_LEGACY + AT91SAM9263_ID_ISI,
 | |
| 		.flags	= IORESOURCE_IRQ,
 | |
| 	},
 | |
| };
 | |
| 
 | |
| static struct platform_device at91sam9263_isi_device = {
 | |
| 	.name		= "at91_isi",
 | |
| 	.id		= -1,
 | |
| 	.resource	= isi_resources,
 | |
| 	.num_resources	= ARRAY_SIZE(isi_resources),
 | |
| };
 | |
| 
 | |
| void __init at91_add_device_isi(struct isi_platform_data *data,
 | |
| 		bool use_pck_as_mck)
 | |
| {
 | |
| 	at91_set_A_periph(AT91_PIN_PE0, 0);	/* ISI_D0 */
 | |
| 	at91_set_A_periph(AT91_PIN_PE1, 0);	/* ISI_D1 */
 | |
| 	at91_set_A_periph(AT91_PIN_PE2, 0);	/* ISI_D2 */
 | |
| 	at91_set_A_periph(AT91_PIN_PE3, 0);	/* ISI_D3 */
 | |
| 	at91_set_A_periph(AT91_PIN_PE4, 0);	/* ISI_D4 */
 | |
| 	at91_set_A_periph(AT91_PIN_PE5, 0);	/* ISI_D5 */
 | |
| 	at91_set_A_periph(AT91_PIN_PE6, 0);	/* ISI_D6 */
 | |
| 	at91_set_A_periph(AT91_PIN_PE7, 0);	/* ISI_D7 */
 | |
| 	at91_set_A_periph(AT91_PIN_PE8, 0);	/* ISI_PCK */
 | |
| 	at91_set_A_periph(AT91_PIN_PE9, 0);	/* ISI_HSYNC */
 | |
| 	at91_set_A_periph(AT91_PIN_PE10, 0);	/* ISI_VSYNC */
 | |
| 	at91_set_B_periph(AT91_PIN_PE12, 0);	/* ISI_PD8 */
 | |
| 	at91_set_B_periph(AT91_PIN_PE13, 0);	/* ISI_PD9 */
 | |
| 	at91_set_B_periph(AT91_PIN_PE14, 0);	/* ISI_PD10 */
 | |
| 	at91_set_B_periph(AT91_PIN_PE15, 0);	/* ISI_PD11 */
 | |
| 
 | |
| 	if (use_pck_as_mck) {
 | |
| 		at91_set_B_periph(AT91_PIN_PE11, 0);	/* ISI_MCK (PCK3) */
 | |
| 
 | |
| 		/* TODO: register the PCK for ISI_MCK and set its parent */
 | |
| 	}
 | |
| }
 | |
| #else
 | |
| void __init at91_add_device_isi(struct isi_platform_data *data,
 | |
| 		bool use_pck_as_mck) {}
 | |
| #endif
 | |
| 
 | |
| 
 | |
| /* --------------------------------------------------------------------
 | |
|  *  Timer/Counter block
 | |
|  * -------------------------------------------------------------------- */
 | |
| 
 | |
| #ifdef CONFIG_ATMEL_TCLIB
 | |
| 
 | |
| static struct resource tcb_resources[] = {
 | |
| 	[0] = {
 | |
| 		.start	= AT91SAM9263_BASE_TCB0,
 | |
| 		.end	= AT91SAM9263_BASE_TCB0 + SZ_16K - 1,
 | |
| 		.flags	= IORESOURCE_MEM,
 | |
| 	},
 | |
| 	[1] = {
 | |
| 		.start	= NR_IRQS_LEGACY + AT91SAM9263_ID_TCB,
 | |
| 		.end	= NR_IRQS_LEGACY + AT91SAM9263_ID_TCB,
 | |
| 		.flags	= IORESOURCE_IRQ,
 | |
| 	},
 | |
| };
 | |
| 
 | |
| static struct platform_device at91sam9263_tcb_device = {
 | |
| 	.name		= "atmel_tcb",
 | |
| 	.id		= 0,
 | |
| 	.resource	= tcb_resources,
 | |
| 	.num_resources	= ARRAY_SIZE(tcb_resources),
 | |
| };
 | |
| 
 | |
| #if defined(CONFIG_OF)
 | |
| static struct of_device_id tcb_ids[] = {
 | |
| 	{ .compatible = "atmel,at91rm9200-tcb" },
 | |
| 	{ /*sentinel*/ }
 | |
| };
 | |
| #endif
 | |
| 
 | |
| static void __init at91_add_device_tc(void)
 | |
| {
 | |
| #if defined(CONFIG_OF)
 | |
| 	struct device_node *np;
 | |
| 
 | |
| 	np = of_find_matching_node(NULL, tcb_ids);
 | |
| 	if (np) {
 | |
| 		of_node_put(np);
 | |
| 		return;
 | |
| 	}
 | |
| #endif
 | |
| 
 | |
| 	platform_device_register(&at91sam9263_tcb_device);
 | |
| }
 | |
| #else
 | |
| static void __init at91_add_device_tc(void) { }
 | |
| #endif
 | |
| 
 | |
| 
 | |
| /* --------------------------------------------------------------------
 | |
|  *  RTT
 | |
|  * -------------------------------------------------------------------- */
 | |
| 
 | |
| static struct resource rtt0_resources[] = {
 | |
| 	{
 | |
| 		.start	= AT91SAM9263_BASE_RTT0,
 | |
| 		.end	= AT91SAM9263_BASE_RTT0 + SZ_16 - 1,
 | |
| 		.flags	= IORESOURCE_MEM,
 | |
| 	}, {
 | |
| 		.flags	= IORESOURCE_MEM,
 | |
| 	}, {
 | |
| 		.flags  = IORESOURCE_IRQ,
 | |
| 	}
 | |
| };
 | |
| 
 | |
| static struct platform_device at91sam9263_rtt0_device = {
 | |
| 	.name		= "at91_rtt",
 | |
| 	.id		= 0,
 | |
| 	.resource	= rtt0_resources,
 | |
| };
 | |
| 
 | |
| static struct resource rtt1_resources[] = {
 | |
| 	{
 | |
| 		.start	= AT91SAM9263_BASE_RTT1,
 | |
| 		.end	= AT91SAM9263_BASE_RTT1 + SZ_16 - 1,
 | |
| 		.flags	= IORESOURCE_MEM,
 | |
| 	}, {
 | |
| 		.flags	= IORESOURCE_MEM,
 | |
| 	}, {
 | |
| 		.flags  = IORESOURCE_IRQ,
 | |
| 	}
 | |
| };
 | |
| 
 | |
| static struct platform_device at91sam9263_rtt1_device = {
 | |
| 	.name		= "at91_rtt",
 | |
| 	.id		= 1,
 | |
| 	.resource	= rtt1_resources,
 | |
| };
 | |
| 
 | |
| #if IS_ENABLED(CONFIG_RTC_DRV_AT91SAM9)
 | |
| static void __init at91_add_device_rtt_rtc(void)
 | |
| {
 | |
| 	struct platform_device *pdev;
 | |
| 	struct resource *r;
 | |
| 
 | |
| 	switch (CONFIG_RTC_DRV_AT91SAM9_RTT) {
 | |
| 	case 0:
 | |
| 		/*
 | |
| 		 * The second resource is needed only for the chosen RTT:
 | |
| 		 * GPBR will serve as the storage for RTC time offset
 | |
| 		 */
 | |
| 		at91sam9263_rtt0_device.num_resources = 3;
 | |
| 		at91sam9263_rtt1_device.num_resources = 1;
 | |
| 		pdev = &at91sam9263_rtt0_device;
 | |
| 		r = rtt0_resources;
 | |
| 		break;
 | |
| 	case 1:
 | |
| 		at91sam9263_rtt0_device.num_resources = 1;
 | |
| 		at91sam9263_rtt1_device.num_resources = 3;
 | |
| 		pdev = &at91sam9263_rtt1_device;
 | |
| 		r = rtt1_resources;
 | |
| 		break;
 | |
| 	default:
 | |
| 		pr_err("at91sam9263: only supports 2 RTT (%d)\n",
 | |
| 		       CONFIG_RTC_DRV_AT91SAM9_RTT);
 | |
| 		return;
 | |
| 	}
 | |
| 
 | |
| 	pdev->name = "rtc-at91sam9";
 | |
| 	r[1].start = AT91SAM9263_BASE_GPBR + 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR;
 | |
| 	r[1].end = r[1].start + 3;
 | |
| 	r[2].start = NR_IRQS_LEGACY + AT91_ID_SYS;
 | |
| 	r[2].end = NR_IRQS_LEGACY + AT91_ID_SYS;
 | |
| }
 | |
| #else
 | |
| static void __init at91_add_device_rtt_rtc(void)
 | |
| {
 | |
| 	/* Only one resource is needed: RTT not used as RTC */
 | |
| 	at91sam9263_rtt0_device.num_resources = 1;
 | |
| 	at91sam9263_rtt1_device.num_resources = 1;
 | |
| }
 | |
| #endif
 | |
| 
 | |
| static void __init at91_add_device_rtt(void)
 | |
| {
 | |
| 	at91_add_device_rtt_rtc();
 | |
| 	platform_device_register(&at91sam9263_rtt0_device);
 | |
| 	platform_device_register(&at91sam9263_rtt1_device);
 | |
| }
 | |
| 
 | |
| 
 | |
| /* --------------------------------------------------------------------
 | |
|  *  Watchdog
 | |
|  * -------------------------------------------------------------------- */
 | |
| 
 | |
| #if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE)
 | |
| static struct resource wdt_resources[] = {
 | |
| 	{
 | |
| 		.start	= AT91SAM9263_BASE_WDT,
 | |
| 		.end	= AT91SAM9263_BASE_WDT + SZ_16 - 1,
 | |
| 		.flags	= IORESOURCE_MEM,
 | |
| 	}
 | |
| };
 | |
| 
 | |
| static struct platform_device at91sam9263_wdt_device = {
 | |
| 	.name		= "at91_wdt",
 | |
| 	.id		= -1,
 | |
| 	.resource	= wdt_resources,
 | |
| 	.num_resources	= ARRAY_SIZE(wdt_resources),
 | |
| };
 | |
| 
 | |
| static void __init at91_add_device_watchdog(void)
 | |
| {
 | |
| 	platform_device_register(&at91sam9263_wdt_device);
 | |
| }
 | |
| #else
 | |
| static void __init at91_add_device_watchdog(void) {}
 | |
| #endif
 | |
| 
 | |
| 
 | |
| /* --------------------------------------------------------------------
 | |
|  *  PWM
 | |
|  * --------------------------------------------------------------------*/
 | |
| 
 | |
| #if defined(CONFIG_ATMEL_PWM)
 | |
| static u32 pwm_mask;
 | |
| 
 | |
| static struct resource pwm_resources[] = {
 | |
| 	[0] = {
 | |
| 		.start	= AT91SAM9263_BASE_PWMC,
 | |
| 		.end	= AT91SAM9263_BASE_PWMC + SZ_16K - 1,
 | |
| 		.flags	= IORESOURCE_MEM,
 | |
| 	},
 | |
| 	[1] = {
 | |
| 		.start	= NR_IRQS_LEGACY + AT91SAM9263_ID_PWMC,
 | |
| 		.end	= NR_IRQS_LEGACY + AT91SAM9263_ID_PWMC,
 | |
| 		.flags	= IORESOURCE_IRQ,
 | |
| 	},
 | |
| };
 | |
| 
 | |
| static struct platform_device at91sam9263_pwm0_device = {
 | |
| 	.name	= "atmel_pwm",
 | |
| 	.id	= -1,
 | |
| 	.dev	= {
 | |
| 		.platform_data		= &pwm_mask,
 | |
| 	},
 | |
| 	.resource	= pwm_resources,
 | |
| 	.num_resources	= ARRAY_SIZE(pwm_resources),
 | |
| };
 | |
| 
 | |
| void __init at91_add_device_pwm(u32 mask)
 | |
| {
 | |
| 	if (mask & (1 << AT91_PWM0))
 | |
| 		at91_set_B_periph(AT91_PIN_PB7, 1);	/* enable PWM0 */
 | |
| 
 | |
| 	if (mask & (1 << AT91_PWM1))
 | |
| 		at91_set_B_periph(AT91_PIN_PB8, 1);	/* enable PWM1 */
 | |
| 
 | |
| 	if (mask & (1 << AT91_PWM2))
 | |
| 		at91_set_B_periph(AT91_PIN_PC29, 1);	/* enable PWM2 */
 | |
| 
 | |
| 	if (mask & (1 << AT91_PWM3))
 | |
| 		at91_set_B_periph(AT91_PIN_PB29, 1);	/* enable PWM3 */
 | |
| 
 | |
| 	pwm_mask = mask;
 | |
| 
 | |
| 	platform_device_register(&at91sam9263_pwm0_device);
 | |
| }
 | |
| #else
 | |
| void __init at91_add_device_pwm(u32 mask) {}
 | |
| #endif
 | |
| 
 | |
| 
 | |
| /* --------------------------------------------------------------------
 | |
|  *  SSC -- Synchronous Serial Controller
 | |
|  * -------------------------------------------------------------------- */
 | |
| 
 | |
| #if defined(CONFIG_ATMEL_SSC) || defined(CONFIG_ATMEL_SSC_MODULE)
 | |
| static u64 ssc0_dmamask = DMA_BIT_MASK(32);
 | |
| 
 | |
| static struct resource ssc0_resources[] = {
 | |
| 	[0] = {
 | |
| 		.start	= AT91SAM9263_BASE_SSC0,
 | |
| 		.end	= AT91SAM9263_BASE_SSC0 + SZ_16K - 1,
 | |
| 		.flags	= IORESOURCE_MEM,
 | |
| 	},
 | |
| 	[1] = {
 | |
| 		.start	= NR_IRQS_LEGACY + AT91SAM9263_ID_SSC0,
 | |
| 		.end	= NR_IRQS_LEGACY + AT91SAM9263_ID_SSC0,
 | |
| 		.flags	= IORESOURCE_IRQ,
 | |
| 	},
 | |
| };
 | |
| 
 | |
| static struct platform_device at91sam9263_ssc0_device = {
 | |
| 	.name	= "at91rm9200_ssc",
 | |
| 	.id	= 0,
 | |
| 	.dev	= {
 | |
| 		.dma_mask		= &ssc0_dmamask,
 | |
| 		.coherent_dma_mask	= DMA_BIT_MASK(32),
 | |
| 	},
 | |
| 	.resource	= ssc0_resources,
 | |
| 	.num_resources	= ARRAY_SIZE(ssc0_resources),
 | |
| };
 | |
| 
 | |
| static inline void configure_ssc0_pins(unsigned pins)
 | |
| {
 | |
| 	if (pins & ATMEL_SSC_TF)
 | |
| 		at91_set_B_periph(AT91_PIN_PB0, 1);
 | |
| 	if (pins & ATMEL_SSC_TK)
 | |
| 		at91_set_B_periph(AT91_PIN_PB1, 1);
 | |
| 	if (pins & ATMEL_SSC_TD)
 | |
| 		at91_set_B_periph(AT91_PIN_PB2, 1);
 | |
| 	if (pins & ATMEL_SSC_RD)
 | |
| 		at91_set_B_periph(AT91_PIN_PB3, 1);
 | |
| 	if (pins & ATMEL_SSC_RK)
 | |
| 		at91_set_B_periph(AT91_PIN_PB4, 1);
 | |
| 	if (pins & ATMEL_SSC_RF)
 | |
| 		at91_set_B_periph(AT91_PIN_PB5, 1);
 | |
| }
 | |
| 
 | |
| static u64 ssc1_dmamask = DMA_BIT_MASK(32);
 | |
| 
 | |
| static struct resource ssc1_resources[] = {
 | |
| 	[0] = {
 | |
| 		.start	= AT91SAM9263_BASE_SSC1,
 | |
| 		.end	= AT91SAM9263_BASE_SSC1 + SZ_16K - 1,
 | |
| 		.flags	= IORESOURCE_MEM,
 | |
| 	},
 | |
| 	[1] = {
 | |
| 		.start	= NR_IRQS_LEGACY + AT91SAM9263_ID_SSC1,
 | |
| 		.end	= NR_IRQS_LEGACY + AT91SAM9263_ID_SSC1,
 | |
| 		.flags	= IORESOURCE_IRQ,
 | |
| 	},
 | |
| };
 | |
| 
 | |
| static struct platform_device at91sam9263_ssc1_device = {
 | |
| 	.name	= "at91rm9200_ssc",
 | |
| 	.id	= 1,
 | |
| 	.dev	= {
 | |
| 		.dma_mask		= &ssc1_dmamask,
 | |
| 		.coherent_dma_mask	= DMA_BIT_MASK(32),
 | |
| 	},
 | |
| 	.resource	= ssc1_resources,
 | |
| 	.num_resources	= ARRAY_SIZE(ssc1_resources),
 | |
| };
 | |
| 
 | |
| static inline void configure_ssc1_pins(unsigned pins)
 | |
| {
 | |
| 	if (pins & ATMEL_SSC_TF)
 | |
| 		at91_set_A_periph(AT91_PIN_PB6, 1);
 | |
| 	if (pins & ATMEL_SSC_TK)
 | |
| 		at91_set_A_periph(AT91_PIN_PB7, 1);
 | |
| 	if (pins & ATMEL_SSC_TD)
 | |
| 		at91_set_A_periph(AT91_PIN_PB8, 1);
 | |
| 	if (pins & ATMEL_SSC_RD)
 | |
| 		at91_set_A_periph(AT91_PIN_PB9, 1);
 | |
| 	if (pins & ATMEL_SSC_RK)
 | |
| 		at91_set_A_periph(AT91_PIN_PB10, 1);
 | |
| 	if (pins & ATMEL_SSC_RF)
 | |
| 		at91_set_A_periph(AT91_PIN_PB11, 1);
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * SSC controllers are accessed through library code, instead of any
 | |
|  * kind of all-singing/all-dancing driver.  For example one could be
 | |
|  * used by a particular I2S audio codec's driver, while another one
 | |
|  * on the same system might be used by a custom data capture driver.
 | |
|  */
 | |
| void __init at91_add_device_ssc(unsigned id, unsigned pins)
 | |
| {
 | |
| 	struct platform_device *pdev;
 | |
| 
 | |
| 	/*
 | |
| 	 * NOTE: caller is responsible for passing information matching
 | |
| 	 * "pins" to whatever will be using each particular controller.
 | |
| 	 */
 | |
| 	switch (id) {
 | |
| 	case AT91SAM9263_ID_SSC0:
 | |
| 		pdev = &at91sam9263_ssc0_device;
 | |
| 		configure_ssc0_pins(pins);
 | |
| 		break;
 | |
| 	case AT91SAM9263_ID_SSC1:
 | |
| 		pdev = &at91sam9263_ssc1_device;
 | |
| 		configure_ssc1_pins(pins);
 | |
| 		break;
 | |
| 	default:
 | |
| 		return;
 | |
| 	}
 | |
| 
 | |
| 	platform_device_register(pdev);
 | |
| }
 | |
| 
 | |
| #else
 | |
| void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
 | |
| #endif
 | |
| 
 | |
| 
 | |
| /* --------------------------------------------------------------------
 | |
|  *  UART
 | |
|  * -------------------------------------------------------------------- */
 | |
| 
 | |
| #if defined(CONFIG_SERIAL_ATMEL)
 | |
| 
 | |
| static struct resource dbgu_resources[] = {
 | |
| 	[0] = {
 | |
| 		.start	= AT91SAM9263_BASE_DBGU,
 | |
| 		.end	= AT91SAM9263_BASE_DBGU + SZ_512 - 1,
 | |
| 		.flags	= IORESOURCE_MEM,
 | |
| 	},
 | |
| 	[1] = {
 | |
| 		.start	= NR_IRQS_LEGACY + AT91_ID_SYS,
 | |
| 		.end	= NR_IRQS_LEGACY + AT91_ID_SYS,
 | |
| 		.flags	= IORESOURCE_IRQ,
 | |
| 	},
 | |
| };
 | |
| 
 | |
| static struct atmel_uart_data dbgu_data = {
 | |
| 	.use_dma_tx	= 0,
 | |
| 	.use_dma_rx	= 0,		/* DBGU not capable of receive DMA */
 | |
| };
 | |
| 
 | |
| static u64 dbgu_dmamask = DMA_BIT_MASK(32);
 | |
| 
 | |
| static struct platform_device at91sam9263_dbgu_device = {
 | |
| 	.name		= "atmel_usart",
 | |
| 	.id		= 0,
 | |
| 	.dev		= {
 | |
| 				.dma_mask		= &dbgu_dmamask,
 | |
| 				.coherent_dma_mask	= DMA_BIT_MASK(32),
 | |
| 				.platform_data		= &dbgu_data,
 | |
| 	},
 | |
| 	.resource	= dbgu_resources,
 | |
| 	.num_resources	= ARRAY_SIZE(dbgu_resources),
 | |
| };
 | |
| 
 | |
| static inline void configure_dbgu_pins(void)
 | |
| {
 | |
| 	at91_set_A_periph(AT91_PIN_PC30, 0);		/* DRXD */
 | |
| 	at91_set_A_periph(AT91_PIN_PC31, 1);		/* DTXD */
 | |
| }
 | |
| 
 | |
| static struct resource uart0_resources[] = {
 | |
| 	[0] = {
 | |
| 		.start	= AT91SAM9263_BASE_US0,
 | |
| 		.end	= AT91SAM9263_BASE_US0 + SZ_16K - 1,
 | |
| 		.flags	= IORESOURCE_MEM,
 | |
| 	},
 | |
| 	[1] = {
 | |
| 		.start	= NR_IRQS_LEGACY + AT91SAM9263_ID_US0,
 | |
| 		.end	= NR_IRQS_LEGACY + AT91SAM9263_ID_US0,
 | |
| 		.flags	= IORESOURCE_IRQ,
 | |
| 	},
 | |
| };
 | |
| 
 | |
| static struct atmel_uart_data uart0_data = {
 | |
| 	.use_dma_tx	= 1,
 | |
| 	.use_dma_rx	= 1,
 | |
| };
 | |
| 
 | |
| static u64 uart0_dmamask = DMA_BIT_MASK(32);
 | |
| 
 | |
| static struct platform_device at91sam9263_uart0_device = {
 | |
| 	.name		= "atmel_usart",
 | |
| 	.id		= 1,
 | |
| 	.dev		= {
 | |
| 				.dma_mask		= &uart0_dmamask,
 | |
| 				.coherent_dma_mask	= DMA_BIT_MASK(32),
 | |
| 				.platform_data		= &uart0_data,
 | |
| 	},
 | |
| 	.resource	= uart0_resources,
 | |
| 	.num_resources	= ARRAY_SIZE(uart0_resources),
 | |
| };
 | |
| 
 | |
| static inline void configure_usart0_pins(unsigned pins)
 | |
| {
 | |
| 	at91_set_A_periph(AT91_PIN_PA26, 1);		/* TXD0 */
 | |
| 	at91_set_A_periph(AT91_PIN_PA27, 0);		/* RXD0 */
 | |
| 
 | |
| 	if (pins & ATMEL_UART_RTS)
 | |
| 		at91_set_A_periph(AT91_PIN_PA28, 0);	/* RTS0 */
 | |
| 	if (pins & ATMEL_UART_CTS)
 | |
| 		at91_set_A_periph(AT91_PIN_PA29, 0);	/* CTS0 */
 | |
| }
 | |
| 
 | |
| static struct resource uart1_resources[] = {
 | |
| 	[0] = {
 | |
| 		.start	= AT91SAM9263_BASE_US1,
 | |
| 		.end	= AT91SAM9263_BASE_US1 + SZ_16K - 1,
 | |
| 		.flags	= IORESOURCE_MEM,
 | |
| 	},
 | |
| 	[1] = {
 | |
| 		.start	= NR_IRQS_LEGACY + AT91SAM9263_ID_US1,
 | |
| 		.end	= NR_IRQS_LEGACY + AT91SAM9263_ID_US1,
 | |
| 		.flags	= IORESOURCE_IRQ,
 | |
| 	},
 | |
| };
 | |
| 
 | |
| static struct atmel_uart_data uart1_data = {
 | |
| 	.use_dma_tx	= 1,
 | |
| 	.use_dma_rx	= 1,
 | |
| };
 | |
| 
 | |
| static u64 uart1_dmamask = DMA_BIT_MASK(32);
 | |
| 
 | |
| static struct platform_device at91sam9263_uart1_device = {
 | |
| 	.name		= "atmel_usart",
 | |
| 	.id		= 2,
 | |
| 	.dev		= {
 | |
| 				.dma_mask		= &uart1_dmamask,
 | |
| 				.coherent_dma_mask	= DMA_BIT_MASK(32),
 | |
| 				.platform_data		= &uart1_data,
 | |
| 	},
 | |
| 	.resource	= uart1_resources,
 | |
| 	.num_resources	= ARRAY_SIZE(uart1_resources),
 | |
| };
 | |
| 
 | |
| static inline void configure_usart1_pins(unsigned pins)
 | |
| {
 | |
| 	at91_set_A_periph(AT91_PIN_PD0, 1);		/* TXD1 */
 | |
| 	at91_set_A_periph(AT91_PIN_PD1, 0);		/* RXD1 */
 | |
| 
 | |
| 	if (pins & ATMEL_UART_RTS)
 | |
| 		at91_set_B_periph(AT91_PIN_PD7, 0);	/* RTS1 */
 | |
| 	if (pins & ATMEL_UART_CTS)
 | |
| 		at91_set_B_periph(AT91_PIN_PD8, 0);	/* CTS1 */
 | |
| }
 | |
| 
 | |
| static struct resource uart2_resources[] = {
 | |
| 	[0] = {
 | |
| 		.start	= AT91SAM9263_BASE_US2,
 | |
| 		.end	= AT91SAM9263_BASE_US2 + SZ_16K - 1,
 | |
| 		.flags	= IORESOURCE_MEM,
 | |
| 	},
 | |
| 	[1] = {
 | |
| 		.start	= NR_IRQS_LEGACY + AT91SAM9263_ID_US2,
 | |
| 		.end	= NR_IRQS_LEGACY + AT91SAM9263_ID_US2,
 | |
| 		.flags	= IORESOURCE_IRQ,
 | |
| 	},
 | |
| };
 | |
| 
 | |
| static struct atmel_uart_data uart2_data = {
 | |
| 	.use_dma_tx	= 1,
 | |
| 	.use_dma_rx	= 1,
 | |
| };
 | |
| 
 | |
| static u64 uart2_dmamask = DMA_BIT_MASK(32);
 | |
| 
 | |
| static struct platform_device at91sam9263_uart2_device = {
 | |
| 	.name		= "atmel_usart",
 | |
| 	.id		= 3,
 | |
| 	.dev		= {
 | |
| 				.dma_mask		= &uart2_dmamask,
 | |
| 				.coherent_dma_mask	= DMA_BIT_MASK(32),
 | |
| 				.platform_data		= &uart2_data,
 | |
| 	},
 | |
| 	.resource	= uart2_resources,
 | |
| 	.num_resources	= ARRAY_SIZE(uart2_resources),
 | |
| };
 | |
| 
 | |
| static inline void configure_usart2_pins(unsigned pins)
 | |
| {
 | |
| 	at91_set_A_periph(AT91_PIN_PD2, 1);		/* TXD2 */
 | |
| 	at91_set_A_periph(AT91_PIN_PD3, 0);		/* RXD2 */
 | |
| 
 | |
| 	if (pins & ATMEL_UART_RTS)
 | |
| 		at91_set_B_periph(AT91_PIN_PD5, 0);	/* RTS2 */
 | |
| 	if (pins & ATMEL_UART_CTS)
 | |
| 		at91_set_B_periph(AT91_PIN_PD6, 0);	/* CTS2 */
 | |
| }
 | |
| 
 | |
| static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART];	/* the UARTs to use */
 | |
| 
 | |
| void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
 | |
| {
 | |
| 	struct platform_device *pdev;
 | |
| 	struct atmel_uart_data *pdata;
 | |
| 
 | |
| 	switch (id) {
 | |
| 		case 0:		/* DBGU */
 | |
| 			pdev = &at91sam9263_dbgu_device;
 | |
| 			configure_dbgu_pins();
 | |
| 			break;
 | |
| 		case AT91SAM9263_ID_US0:
 | |
| 			pdev = &at91sam9263_uart0_device;
 | |
| 			configure_usart0_pins(pins);
 | |
| 			break;
 | |
| 		case AT91SAM9263_ID_US1:
 | |
| 			pdev = &at91sam9263_uart1_device;
 | |
| 			configure_usart1_pins(pins);
 | |
| 			break;
 | |
| 		case AT91SAM9263_ID_US2:
 | |
| 			pdev = &at91sam9263_uart2_device;
 | |
| 			configure_usart2_pins(pins);
 | |
| 			break;
 | |
| 		default:
 | |
| 			return;
 | |
| 	}
 | |
| 	pdata = pdev->dev.platform_data;
 | |
| 	pdata->num = portnr;		/* update to mapped ID */
 | |
| 
 | |
| 	if (portnr < ATMEL_MAX_UART)
 | |
| 		at91_uarts[portnr] = pdev;
 | |
| }
 | |
| 
 | |
| void __init at91_add_device_serial(void)
 | |
| {
 | |
| 	int i;
 | |
| 
 | |
| 	for (i = 0; i < ATMEL_MAX_UART; i++) {
 | |
| 		if (at91_uarts[i])
 | |
| 			platform_device_register(at91_uarts[i]);
 | |
| 	}
 | |
| }
 | |
| #else
 | |
| void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
 | |
| void __init at91_add_device_serial(void) {}
 | |
| #endif
 | |
| 
 | |
| 
 | |
| /* -------------------------------------------------------------------- */
 | |
| /*
 | |
|  * These devices are always present and don't need any board-specific
 | |
|  * setup.
 | |
|  */
 | |
| static int __init at91_add_standard_devices(void)
 | |
| {
 | |
| 	if (of_have_populated_dt())
 | |
| 		return 0;
 | |
| 
 | |
| 	at91_add_device_rtt();
 | |
| 	at91_add_device_watchdog();
 | |
| 	at91_add_device_tc();
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| arch_initcall(at91_add_standard_devices);
 |