Pull DMA mask updates from Russell King:
"This series cleans up the handling of DMA masks in a lot of drivers,
fixing some bugs as we go.
Some of the more serious errors include:
- drivers which only set their coherent DMA mask if the attempt to
set the streaming mask fails.
- drivers which test for a NULL dma mask pointer, and then set the
dma mask pointer to a location in their module .data section -
which will cause problems if the module is reloaded.
To counter these, I have introduced two helper functions:
- dma_set_mask_and_coherent() takes care of setting both the
streaming and coherent masks at the same time, with the correct
error handling as specified by the API.
- dma_coerce_mask_and_coherent() which resolves the problem of
drivers forcefully setting DMA masks. This is more a marker for
future work to further clean these locations up - the code which
creates the devices really should be initialising these, but to fix
that in one go along with this change could potentially be very
disruptive.
The last thing this series does is prise away some of Linux's addition
to "DMA addresses are physical addresses and RAM always starts at
zero". We have ARM LPAE systems where all system memory is above 4GB
physical, hence having DMA masks interpreted by (eg) the block layers
as describing physical addresses in the range 0..DMAMASK fails on
these platforms. Santosh Shilimkar addresses this in this series; the
patches were copied to the appropriate people multiple times but were
ignored.
Fixing this also gets rid of some ARM weirdness in the setup of the
max*pfn variables, and brings ARM into line with every other Linux
architecture as far as those go"
* 'for-linus-dma-masks' of git://git.linaro.org/people/rmk/linux-arm: (52 commits)
ARM: 7805/1: mm: change max*pfn to include the physical offset of memory
ARM: 7797/1: mmc: Use dma_max_pfn(dev) helper for bounce_limit calculations
ARM: 7796/1: scsi: Use dma_max_pfn(dev) helper for bounce_limit calculations
ARM: 7795/1: mm: dma-mapping: Add dma_max_pfn(dev) helper function
ARM: 7794/1: block: Rename parameter dma_mask to max_addr for blk_queue_bounce_limit()
ARM: DMA-API: better handing of DMA masks for coherent allocations
ARM: 7857/1: dma: imx-sdma: setup dma mask
DMA-API: firmware/google/gsmi.c: avoid direct access to DMA masks
DMA-API: dcdbas: update DMA mask handing
DMA-API: dma: edma.c: no need to explicitly initialize DMA masks
DMA-API: usb: musb: use platform_device_register_full() to avoid directly messing with dma masks
DMA-API: crypto: remove last references to 'static struct device *dev'
DMA-API: crypto: fix ixp4xx crypto platform device support
DMA-API: others: use dma_set_coherent_mask()
DMA-API: staging: use dma_set_coherent_mask()
DMA-API: usb: use new dma_coerce_mask_and_coherent()
DMA-API: usb: use dma_set_coherent_mask()
DMA-API: parport: parport_pc.c: use dma_coerce_mask_and_coherent()
DMA-API: net: octeon: use dma_coerce_mask_and_coherent()
DMA-API: net: nxp/lpc_eth: use dma_coerce_mask_and_coherent()
...
300 lines
7.2 KiB
C
300 lines
7.2 KiB
C
/*
|
|
* SAMSUNG EXYNOS USB HOST EHCI Controller
|
|
*
|
|
* Copyright (C) 2011 Samsung Electronics Co.Ltd
|
|
* Author: Jingoo Han <jg1.han@samsung.com>
|
|
* Author: Joonyoung Shim <jy0922.shim@samsung.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/io.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_gpio.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/usb/phy.h>
|
|
#include <linux/usb/samsung_usb_phy.h>
|
|
#include <linux/usb.h>
|
|
#include <linux/usb/hcd.h>
|
|
#include <linux/usb/otg.h>
|
|
|
|
#include "ehci.h"
|
|
|
|
#define DRIVER_DESC "EHCI EXYNOS driver"
|
|
|
|
#define EHCI_INSNREG00(base) (base + 0x90)
|
|
#define EHCI_INSNREG00_ENA_INCR16 (0x1 << 25)
|
|
#define EHCI_INSNREG00_ENA_INCR8 (0x1 << 24)
|
|
#define EHCI_INSNREG00_ENA_INCR4 (0x1 << 23)
|
|
#define EHCI_INSNREG00_ENA_INCRX_ALIGN (0x1 << 22)
|
|
#define EHCI_INSNREG00_ENABLE_DMA_BURST \
|
|
(EHCI_INSNREG00_ENA_INCR16 | EHCI_INSNREG00_ENA_INCR8 | \
|
|
EHCI_INSNREG00_ENA_INCR4 | EHCI_INSNREG00_ENA_INCRX_ALIGN)
|
|
|
|
static const char hcd_name[] = "ehci-exynos";
|
|
static struct hc_driver __read_mostly exynos_ehci_hc_driver;
|
|
|
|
struct exynos_ehci_hcd {
|
|
struct clk *clk;
|
|
struct usb_phy *phy;
|
|
struct usb_otg *otg;
|
|
};
|
|
|
|
#define to_exynos_ehci(hcd) (struct exynos_ehci_hcd *)(hcd_to_ehci(hcd)->priv)
|
|
|
|
static void exynos_setup_vbus_gpio(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
int err;
|
|
int gpio;
|
|
|
|
if (!dev->of_node)
|
|
return;
|
|
|
|
gpio = of_get_named_gpio(dev->of_node, "samsung,vbus-gpio", 0);
|
|
if (!gpio_is_valid(gpio))
|
|
return;
|
|
|
|
err = devm_gpio_request_one(dev, gpio, GPIOF_OUT_INIT_HIGH,
|
|
"ehci_vbus_gpio");
|
|
if (err)
|
|
dev_err(dev, "can't request ehci vbus gpio %d", gpio);
|
|
}
|
|
|
|
static int exynos_ehci_probe(struct platform_device *pdev)
|
|
{
|
|
struct exynos_ehci_hcd *exynos_ehci;
|
|
struct usb_hcd *hcd;
|
|
struct ehci_hcd *ehci;
|
|
struct resource *res;
|
|
struct usb_phy *phy;
|
|
int irq;
|
|
int err;
|
|
|
|
/*
|
|
* Right now device-tree probed devices don't get dma_mask set.
|
|
* Since shared usb code relies on it, set it here for now.
|
|
* Once we move to full device tree support this will vanish off.
|
|
*/
|
|
err = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
|
|
if (err)
|
|
return err;
|
|
|
|
exynos_setup_vbus_gpio(pdev);
|
|
|
|
hcd = usb_create_hcd(&exynos_ehci_hc_driver,
|
|
&pdev->dev, dev_name(&pdev->dev));
|
|
if (!hcd) {
|
|
dev_err(&pdev->dev, "Unable to create HCD\n");
|
|
return -ENOMEM;
|
|
}
|
|
exynos_ehci = to_exynos_ehci(hcd);
|
|
|
|
if (of_device_is_compatible(pdev->dev.of_node,
|
|
"samsung,exynos5440-ehci"))
|
|
goto skip_phy;
|
|
|
|
phy = devm_usb_get_phy(&pdev->dev, USB_PHY_TYPE_USB2);
|
|
if (IS_ERR(phy)) {
|
|
usb_put_hcd(hcd);
|
|
dev_warn(&pdev->dev, "no platform data or transceiver defined\n");
|
|
return -EPROBE_DEFER;
|
|
} else {
|
|
exynos_ehci->phy = phy;
|
|
exynos_ehci->otg = phy->otg;
|
|
}
|
|
|
|
skip_phy:
|
|
|
|
exynos_ehci->clk = devm_clk_get(&pdev->dev, "usbhost");
|
|
|
|
if (IS_ERR(exynos_ehci->clk)) {
|
|
dev_err(&pdev->dev, "Failed to get usbhost clock\n");
|
|
err = PTR_ERR(exynos_ehci->clk);
|
|
goto fail_clk;
|
|
}
|
|
|
|
err = clk_prepare_enable(exynos_ehci->clk);
|
|
if (err)
|
|
goto fail_clk;
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
if (!res) {
|
|
dev_err(&pdev->dev, "Failed to get I/O memory\n");
|
|
err = -ENXIO;
|
|
goto fail_io;
|
|
}
|
|
|
|
hcd->rsrc_start = res->start;
|
|
hcd->rsrc_len = resource_size(res);
|
|
hcd->regs = devm_ioremap(&pdev->dev, res->start, hcd->rsrc_len);
|
|
if (!hcd->regs) {
|
|
dev_err(&pdev->dev, "Failed to remap I/O memory\n");
|
|
err = -ENOMEM;
|
|
goto fail_io;
|
|
}
|
|
|
|
irq = platform_get_irq(pdev, 0);
|
|
if (!irq) {
|
|
dev_err(&pdev->dev, "Failed to get IRQ\n");
|
|
err = -ENODEV;
|
|
goto fail_io;
|
|
}
|
|
|
|
if (exynos_ehci->otg)
|
|
exynos_ehci->otg->set_host(exynos_ehci->otg, &hcd->self);
|
|
|
|
if (exynos_ehci->phy)
|
|
usb_phy_init(exynos_ehci->phy);
|
|
|
|
ehci = hcd_to_ehci(hcd);
|
|
ehci->caps = hcd->regs;
|
|
|
|
/* DMA burst Enable */
|
|
writel(EHCI_INSNREG00_ENABLE_DMA_BURST, EHCI_INSNREG00(hcd->regs));
|
|
|
|
err = usb_add_hcd(hcd, irq, IRQF_SHARED);
|
|
if (err) {
|
|
dev_err(&pdev->dev, "Failed to add USB HCD\n");
|
|
goto fail_add_hcd;
|
|
}
|
|
|
|
platform_set_drvdata(pdev, hcd);
|
|
|
|
return 0;
|
|
|
|
fail_add_hcd:
|
|
if (exynos_ehci->phy)
|
|
usb_phy_shutdown(exynos_ehci->phy);
|
|
fail_io:
|
|
clk_disable_unprepare(exynos_ehci->clk);
|
|
fail_clk:
|
|
usb_put_hcd(hcd);
|
|
return err;
|
|
}
|
|
|
|
static int exynos_ehci_remove(struct platform_device *pdev)
|
|
{
|
|
struct usb_hcd *hcd = platform_get_drvdata(pdev);
|
|
struct exynos_ehci_hcd *exynos_ehci = to_exynos_ehci(hcd);
|
|
|
|
usb_remove_hcd(hcd);
|
|
|
|
if (exynos_ehci->otg)
|
|
exynos_ehci->otg->set_host(exynos_ehci->otg, &hcd->self);
|
|
|
|
if (exynos_ehci->phy)
|
|
usb_phy_shutdown(exynos_ehci->phy);
|
|
|
|
clk_disable_unprepare(exynos_ehci->clk);
|
|
|
|
usb_put_hcd(hcd);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
static int exynos_ehci_suspend(struct device *dev)
|
|
{
|
|
struct usb_hcd *hcd = dev_get_drvdata(dev);
|
|
struct exynos_ehci_hcd *exynos_ehci = to_exynos_ehci(hcd);
|
|
|
|
bool do_wakeup = device_may_wakeup(dev);
|
|
int rc;
|
|
|
|
rc = ehci_suspend(hcd, do_wakeup);
|
|
|
|
if (exynos_ehci->otg)
|
|
exynos_ehci->otg->set_host(exynos_ehci->otg, &hcd->self);
|
|
|
|
if (exynos_ehci->phy)
|
|
usb_phy_shutdown(exynos_ehci->phy);
|
|
|
|
clk_disable_unprepare(exynos_ehci->clk);
|
|
|
|
return rc;
|
|
}
|
|
|
|
static int exynos_ehci_resume(struct device *dev)
|
|
{
|
|
struct usb_hcd *hcd = dev_get_drvdata(dev);
|
|
struct exynos_ehci_hcd *exynos_ehci = to_exynos_ehci(hcd);
|
|
|
|
clk_prepare_enable(exynos_ehci->clk);
|
|
|
|
if (exynos_ehci->otg)
|
|
exynos_ehci->otg->set_host(exynos_ehci->otg, &hcd->self);
|
|
|
|
if (exynos_ehci->phy)
|
|
usb_phy_init(exynos_ehci->phy);
|
|
|
|
/* DMA burst Enable */
|
|
writel(EHCI_INSNREG00_ENABLE_DMA_BURST, EHCI_INSNREG00(hcd->regs));
|
|
|
|
ehci_resume(hcd, false);
|
|
return 0;
|
|
}
|
|
#else
|
|
#define exynos_ehci_suspend NULL
|
|
#define exynos_ehci_resume NULL
|
|
#endif
|
|
|
|
static const struct dev_pm_ops exynos_ehci_pm_ops = {
|
|
.suspend = exynos_ehci_suspend,
|
|
.resume = exynos_ehci_resume,
|
|
};
|
|
|
|
#ifdef CONFIG_OF
|
|
static const struct of_device_id exynos_ehci_match[] = {
|
|
{ .compatible = "samsung,exynos4210-ehci" },
|
|
{ .compatible = "samsung,exynos5440-ehci" },
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, exynos_ehci_match);
|
|
#endif
|
|
|
|
static struct platform_driver exynos_ehci_driver = {
|
|
.probe = exynos_ehci_probe,
|
|
.remove = exynos_ehci_remove,
|
|
.shutdown = usb_hcd_platform_shutdown,
|
|
.driver = {
|
|
.name = "exynos-ehci",
|
|
.owner = THIS_MODULE,
|
|
.pm = &exynos_ehci_pm_ops,
|
|
.of_match_table = of_match_ptr(exynos_ehci_match),
|
|
}
|
|
};
|
|
static const struct ehci_driver_overrides exynos_overrides __initdata = {
|
|
.extra_priv_size = sizeof(struct exynos_ehci_hcd),
|
|
};
|
|
|
|
static int __init ehci_exynos_init(void)
|
|
{
|
|
if (usb_disabled())
|
|
return -ENODEV;
|
|
|
|
pr_info("%s: " DRIVER_DESC "\n", hcd_name);
|
|
ehci_init_driver(&exynos_ehci_hc_driver, &exynos_overrides);
|
|
return platform_driver_register(&exynos_ehci_driver);
|
|
}
|
|
module_init(ehci_exynos_init);
|
|
|
|
static void __exit ehci_exynos_cleanup(void)
|
|
{
|
|
platform_driver_unregister(&exynos_ehci_driver);
|
|
}
|
|
module_exit(ehci_exynos_cleanup);
|
|
|
|
MODULE_DESCRIPTION(DRIVER_DESC);
|
|
MODULE_ALIAS("platform:exynos-ehci");
|
|
MODULE_AUTHOR("Jingoo Han");
|
|
MODULE_AUTHOR("Joonyoung Shim");
|
|
MODULE_LICENSE("GPL v2");
|