aa9f8328fc
These enums have been separate since the dawn of SAS, mainly because the latter is a procotol only enum and the former includes additional state for libsas. The dichotomy causes endless confusion about which one you should use where and leads to pointless warnings like this: drivers/scsi/mvsas/mv_sas.c: In function 'mvs_update_phyinfo': drivers/scsi/mvsas/mv_sas.c:1162:34: warning: comparison between 'enum sas_device_type' and 'enum sas_dev_type' [-Wenum-compare] Fix by eliminating one of them. The one kept is effectively the sas.h one, but call it sas_device_type and make sure the enums are all properly namespaced with the SAS_ prefix. Signed-off-by: James Bottomley <JBottomley@Parallels.com>
387 lines
14 KiB
C
387 lines
14 KiB
C
/*
|
|
* This file is provided under a dual BSD/GPLv2 license. When using or
|
|
* redistributing this file, you may do so under either license.
|
|
*
|
|
* GPL LICENSE SUMMARY
|
|
*
|
|
* Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of version 2 of the GNU General Public License as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful, but
|
|
* WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
* General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
|
|
* The full GNU General Public License is included in this distribution
|
|
* in the file called LICENSE.GPL.
|
|
*
|
|
* BSD LICENSE
|
|
*
|
|
* Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
*
|
|
* * Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* * Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in
|
|
* the documentation and/or other materials provided with the
|
|
* distribution.
|
|
* * Neither the name of Intel Corporation nor the names of its
|
|
* contributors may be used to endorse or promote products derived
|
|
* from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
|
|
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
|
|
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
|
|
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
|
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
#ifndef _ISCI_REMOTE_DEVICE_H_
|
|
#define _ISCI_REMOTE_DEVICE_H_
|
|
#include <scsi/libsas.h>
|
|
#include <linux/kref.h>
|
|
#include "scu_remote_node_context.h"
|
|
#include "remote_node_context.h"
|
|
#include "port.h"
|
|
|
|
enum sci_remote_device_not_ready_reason_code {
|
|
SCIC_REMOTE_DEVICE_NOT_READY_START_REQUESTED,
|
|
SCIC_REMOTE_DEVICE_NOT_READY_STOP_REQUESTED,
|
|
SCIC_REMOTE_DEVICE_NOT_READY_SATA_REQUEST_STARTED,
|
|
SCIC_REMOTE_DEVICE_NOT_READY_SATA_SDB_ERROR_FIS_RECEIVED,
|
|
SCIC_REMOTE_DEVICE_NOT_READY_SMP_REQUEST_STARTED,
|
|
SCIC_REMOTE_DEVICE_NOT_READY_REASON_CODE_MAX
|
|
};
|
|
|
|
/**
|
|
* isci_remote_device - isci representation of a sas expander / end point
|
|
* @device_port_width: hw setting for number of simultaneous connections
|
|
* @connection_rate: per-taskcontext connection rate for this device
|
|
* @working_request: SATA requests have no tag we for unaccelerated
|
|
* protocols we need a method to associate unsolicited
|
|
* frames with a pending request
|
|
*/
|
|
struct isci_remote_device {
|
|
#define IDEV_START_PENDING 0
|
|
#define IDEV_STOP_PENDING 1
|
|
#define IDEV_ALLOCATED 2
|
|
#define IDEV_GONE 3
|
|
#define IDEV_IO_READY 4
|
|
#define IDEV_IO_NCQERROR 5
|
|
#define IDEV_RNC_LLHANG_ENABLED 6
|
|
#define IDEV_ABORT_PATH_ACTIVE 7
|
|
#define IDEV_ABORT_PATH_RESUME_PENDING 8
|
|
unsigned long flags;
|
|
struct kref kref;
|
|
struct isci_port *isci_port;
|
|
struct domain_device *domain_dev;
|
|
struct list_head node;
|
|
struct sci_base_state_machine sm;
|
|
u32 device_port_width;
|
|
enum sas_linkrate connection_rate;
|
|
struct isci_port *owning_port;
|
|
struct sci_remote_node_context rnc;
|
|
/* XXX unify with device reference counting and delete */
|
|
u32 started_request_count;
|
|
struct isci_request *working_request;
|
|
u32 not_ready_reason;
|
|
scics_sds_remote_node_context_callback abort_resume_cb;
|
|
void *abort_resume_cbparam;
|
|
};
|
|
|
|
#define ISCI_REMOTE_DEVICE_START_TIMEOUT 5000
|
|
|
|
/* device reference routines must be called under sci_lock */
|
|
static inline struct isci_remote_device *isci_get_device(
|
|
struct isci_remote_device *idev)
|
|
{
|
|
if (idev)
|
|
kref_get(&idev->kref);
|
|
return idev;
|
|
}
|
|
|
|
static inline struct isci_remote_device *isci_lookup_device(struct domain_device *dev)
|
|
{
|
|
struct isci_remote_device *idev = dev->lldd_dev;
|
|
|
|
if (idev && !test_bit(IDEV_GONE, &idev->flags)) {
|
|
kref_get(&idev->kref);
|
|
return idev;
|
|
}
|
|
|
|
return NULL;
|
|
}
|
|
|
|
void isci_remote_device_release(struct kref *kref);
|
|
static inline void isci_put_device(struct isci_remote_device *idev)
|
|
{
|
|
if (idev)
|
|
kref_put(&idev->kref, isci_remote_device_release);
|
|
}
|
|
|
|
enum sci_status isci_remote_device_stop(struct isci_host *ihost,
|
|
struct isci_remote_device *idev);
|
|
void isci_remote_device_nuke_requests(struct isci_host *ihost,
|
|
struct isci_remote_device *idev);
|
|
void isci_remote_device_gone(struct domain_device *domain_dev);
|
|
int isci_remote_device_found(struct domain_device *domain_dev);
|
|
|
|
/**
|
|
* sci_remote_device_stop() - This method will stop both transmission and
|
|
* reception of link activity for the supplied remote device. This method
|
|
* disables normal IO requests from flowing through to the remote device.
|
|
* @remote_device: This parameter specifies the device to be stopped.
|
|
* @timeout: This parameter specifies the number of milliseconds in which the
|
|
* stop operation should complete.
|
|
*
|
|
* An indication of whether the device was successfully stopped. SCI_SUCCESS
|
|
* This value is returned if the transmission and reception for the device was
|
|
* successfully stopped.
|
|
*/
|
|
enum sci_status sci_remote_device_stop(
|
|
struct isci_remote_device *idev,
|
|
u32 timeout);
|
|
|
|
/**
|
|
* sci_remote_device_reset() - This method will reset the device making it
|
|
* ready for operation. This method must be called anytime the device is
|
|
* reset either through a SMP phy control or a port hard reset request.
|
|
* @remote_device: This parameter specifies the device to be reset.
|
|
*
|
|
* This method does not actually cause the device hardware to be reset. This
|
|
* method resets the software object so that it will be operational after a
|
|
* device hardware reset completes. An indication of whether the device reset
|
|
* was accepted. SCI_SUCCESS This value is returned if the device reset is
|
|
* started.
|
|
*/
|
|
enum sci_status sci_remote_device_reset(
|
|
struct isci_remote_device *idev);
|
|
|
|
/**
|
|
* sci_remote_device_reset_complete() - This method informs the device object
|
|
* that the reset operation is complete and the device can resume operation
|
|
* again.
|
|
* @remote_device: This parameter specifies the device which is to be informed
|
|
* of the reset complete operation.
|
|
*
|
|
* An indication that the device is resuming operation. SCI_SUCCESS the device
|
|
* is resuming operation.
|
|
*/
|
|
enum sci_status sci_remote_device_reset_complete(
|
|
struct isci_remote_device *idev);
|
|
|
|
/**
|
|
* enum sci_remote_device_states - This enumeration depicts all the states
|
|
* for the common remote device state machine.
|
|
* @SCI_DEV_INITIAL: Simply the initial state for the base remote device
|
|
* state machine.
|
|
*
|
|
* @SCI_DEV_STOPPED: This state indicates that the remote device has
|
|
* successfully been stopped. In this state no new IO operations are
|
|
* permitted. This state is entered from the INITIAL state. This state
|
|
* is entered from the STOPPING state.
|
|
*
|
|
* @SCI_DEV_STARTING: This state indicates the the remote device is in
|
|
* the process of becoming ready (i.e. starting). In this state no new
|
|
* IO operations are permitted. This state is entered from the STOPPED
|
|
* state.
|
|
*
|
|
* @SCI_DEV_READY: This state indicates the remote device is now ready.
|
|
* Thus, the user is able to perform IO operations on the remote device.
|
|
* This state is entered from the STARTING state.
|
|
*
|
|
* @SCI_STP_DEV_IDLE: This is the idle substate for the stp remote
|
|
* device. When there are no active IO for the device it is is in this
|
|
* state.
|
|
*
|
|
* @SCI_STP_DEV_CMD: This is the command state for for the STP remote
|
|
* device. This state is entered when the device is processing a
|
|
* non-NCQ command. The device object will fail any new start IO
|
|
* requests until this command is complete.
|
|
*
|
|
* @SCI_STP_DEV_NCQ: This is the NCQ state for the STP remote device.
|
|
* This state is entered when the device is processing an NCQ reuqest.
|
|
* It will remain in this state so long as there is one or more NCQ
|
|
* requests being processed.
|
|
*
|
|
* @SCI_STP_DEV_NCQ_ERROR: This is the NCQ error state for the STP
|
|
* remote device. This state is entered when an SDB error FIS is
|
|
* received by the device object while in the NCQ state. The device
|
|
* object will only accept a READ LOG command while in this state.
|
|
*
|
|
* @SCI_STP_DEV_ATAPI_ERROR: This is the ATAPI error state for the STP
|
|
* ATAPI remote device. This state is entered when ATAPI device sends
|
|
* error status FIS without data while the device object is in CMD
|
|
* state. A suspension event is expected in this state. The device
|
|
* object will resume right away.
|
|
*
|
|
* @SCI_STP_DEV_AWAIT_RESET: This is the READY substate indicates the
|
|
* device is waiting for the RESET task coming to be recovered from
|
|
* certain hardware specific error.
|
|
*
|
|
* @SCI_SMP_DEV_IDLE: This is the ready operational substate for the
|
|
* remote device. This is the normal operational state for a remote
|
|
* device.
|
|
*
|
|
* @SCI_SMP_DEV_CMD: This is the suspended state for the remote device.
|
|
* This is the state that the device is placed in when a RNC suspend is
|
|
* received by the SCU hardware.
|
|
*
|
|
* @SCI_DEV_STOPPING: This state indicates that the remote device is in
|
|
* the process of stopping. In this state no new IO operations are
|
|
* permitted, but existing IO operations are allowed to complete. This
|
|
* state is entered from the READY state. This state is entered from
|
|
* the FAILED state.
|
|
*
|
|
* @SCI_DEV_FAILED: This state indicates that the remote device has
|
|
* failed. In this state no new IO operations are permitted. This
|
|
* state is entered from the INITIALIZING state. This state is entered
|
|
* from the READY state.
|
|
*
|
|
* @SCI_DEV_RESETTING: This state indicates the device is being reset.
|
|
* In this state no new IO operations are permitted. This state is
|
|
* entered from the READY state.
|
|
*
|
|
* @SCI_DEV_FINAL: Simply the final state for the base remote device
|
|
* state machine.
|
|
*/
|
|
#define REMOTE_DEV_STATES {\
|
|
C(DEV_INITIAL),\
|
|
C(DEV_STOPPED),\
|
|
C(DEV_STARTING),\
|
|
C(DEV_READY),\
|
|
C(STP_DEV_IDLE),\
|
|
C(STP_DEV_CMD),\
|
|
C(STP_DEV_NCQ),\
|
|
C(STP_DEV_NCQ_ERROR),\
|
|
C(STP_DEV_ATAPI_ERROR),\
|
|
C(STP_DEV_AWAIT_RESET),\
|
|
C(SMP_DEV_IDLE),\
|
|
C(SMP_DEV_CMD),\
|
|
C(DEV_STOPPING),\
|
|
C(DEV_FAILED),\
|
|
C(DEV_RESETTING),\
|
|
C(DEV_FINAL),\
|
|
}
|
|
#undef C
|
|
#define C(a) SCI_##a
|
|
enum sci_remote_device_states REMOTE_DEV_STATES;
|
|
#undef C
|
|
const char *dev_state_name(enum sci_remote_device_states state);
|
|
|
|
static inline struct isci_remote_device *rnc_to_dev(struct sci_remote_node_context *rnc)
|
|
{
|
|
struct isci_remote_device *idev;
|
|
|
|
idev = container_of(rnc, typeof(*idev), rnc);
|
|
|
|
return idev;
|
|
}
|
|
|
|
static inline bool dev_is_expander(struct domain_device *dev)
|
|
{
|
|
return dev->dev_type == SAS_EDGE_EXPANDER_DEVICE || dev->dev_type == SAS_FANOUT_EXPANDER_DEVICE;
|
|
}
|
|
|
|
static inline void sci_remote_device_decrement_request_count(struct isci_remote_device *idev)
|
|
{
|
|
/* XXX delete this voodoo when converting to the top-level device
|
|
* reference count
|
|
*/
|
|
if (WARN_ONCE(idev->started_request_count == 0,
|
|
"%s: tried to decrement started_request_count past 0!?",
|
|
__func__))
|
|
/* pass */;
|
|
else
|
|
idev->started_request_count--;
|
|
}
|
|
|
|
void isci_dev_set_hang_detection_timeout(struct isci_remote_device *idev, u32 timeout);
|
|
|
|
enum sci_status sci_remote_device_frame_handler(
|
|
struct isci_remote_device *idev,
|
|
u32 frame_index);
|
|
|
|
enum sci_status sci_remote_device_event_handler(
|
|
struct isci_remote_device *idev,
|
|
u32 event_code);
|
|
|
|
enum sci_status sci_remote_device_start_io(
|
|
struct isci_host *ihost,
|
|
struct isci_remote_device *idev,
|
|
struct isci_request *ireq);
|
|
|
|
enum sci_status sci_remote_device_start_task(
|
|
struct isci_host *ihost,
|
|
struct isci_remote_device *idev,
|
|
struct isci_request *ireq);
|
|
|
|
enum sci_status sci_remote_device_complete_io(
|
|
struct isci_host *ihost,
|
|
struct isci_remote_device *idev,
|
|
struct isci_request *ireq);
|
|
|
|
void sci_remote_device_post_request(
|
|
struct isci_remote_device *idev,
|
|
u32 request);
|
|
|
|
enum sci_status sci_remote_device_terminate_requests(
|
|
struct isci_remote_device *idev);
|
|
|
|
int isci_remote_device_is_safe_to_abort(
|
|
struct isci_remote_device *idev);
|
|
|
|
enum sci_status
|
|
sci_remote_device_abort_requests_pending_abort(
|
|
struct isci_remote_device *idev);
|
|
|
|
enum sci_status isci_remote_device_suspend(
|
|
struct isci_host *ihost,
|
|
struct isci_remote_device *idev);
|
|
|
|
enum sci_status sci_remote_device_resume(
|
|
struct isci_remote_device *idev,
|
|
scics_sds_remote_node_context_callback cb_fn,
|
|
void *cb_p);
|
|
|
|
enum sci_status isci_remote_device_resume_from_abort(
|
|
struct isci_host *ihost,
|
|
struct isci_remote_device *idev);
|
|
|
|
enum sci_status isci_remote_device_reset(
|
|
struct isci_host *ihost,
|
|
struct isci_remote_device *idev);
|
|
|
|
enum sci_status isci_remote_device_reset_complete(
|
|
struct isci_host *ihost,
|
|
struct isci_remote_device *idev);
|
|
|
|
enum sci_status isci_remote_device_suspend_terminate(
|
|
struct isci_host *ihost,
|
|
struct isci_remote_device *idev,
|
|
struct isci_request *ireq);
|
|
|
|
enum sci_status isci_remote_device_terminate_requests(
|
|
struct isci_host *ihost,
|
|
struct isci_remote_device *idev,
|
|
struct isci_request *ireq);
|
|
enum sci_status sci_remote_device_suspend(struct isci_remote_device *idev,
|
|
enum sci_remote_node_suspension_reasons reason);
|
|
#endif /* !defined(_ISCI_REMOTE_DEVICE_H_) */
|