Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
		
			
				
	
	
		
			92 lines
		
	
	
	
		
			3.6 KiB
			
		
	
	
	
		
			Text
		
	
	
	
	
	
			
		
		
	
	
			92 lines
		
	
	
	
		
			3.6 KiB
			
		
	
	
	
		
			Text
		
	
	
	
	
	
Kernel driver abituguru
 | 
						|
=======================
 | 
						|
 | 
						|
Supported chips:
 | 
						|
  * Abit uGuru revision 1 & 2 (Hardware Monitor part only)
 | 
						|
    Prefix: 'abituguru'
 | 
						|
    Addresses scanned: ISA 0x0E0
 | 
						|
    Datasheet: Not available, this driver is based on reverse engineering.
 | 
						|
	A "Datasheet" has been written based on the reverse engineering it
 | 
						|
	should be available in the same dir as this file under the name
 | 
						|
	abituguru-datasheet.
 | 
						|
    Note:
 | 
						|
	The uGuru is a microcontroller with onboard firmware which programs
 | 
						|
	it to behave as a hwmon IC. There are many different revisions of the
 | 
						|
	firmware and thus effectivly many different revisions of the uGuru.
 | 
						|
	Below is an incomplete list with which revisions are used for which
 | 
						|
	Motherboards:
 | 
						|
	uGuru 1.00    ~ 1.24    (AI7, KV8-MAX3, AN7) (1)
 | 
						|
	uGuru 2.0.0.0 ~ 2.0.4.2 (KV8-PRO)
 | 
						|
	uGuru 2.1.0.0 ~ 2.1.2.8 (AS8, AV8, AA8, AG8, AA8XE, AX8)
 | 
						|
	uGuru 2.2.0.0 ~ 2.2.0.6 (AA8 Fatal1ty)
 | 
						|
	uGuru 2.3.0.0 ~ 2.3.0.9 (AN8)
 | 
						|
	uGuru 3.0.0.0 ~ 3.0.x.x (AW8, AL8, AT8, NI8 SLI, AT8 32X, AN8 32X,
 | 
						|
				 AW9D-MAX) (2)
 | 
						|
	1) For revisions 2 and 3 uGuru's the driver can autodetect the
 | 
						|
	   sensortype (Volt or Temp) for bank1 sensors, for revision 1 uGuru's
 | 
						|
	   this doesnot always work. For these uGuru's the autodection can
 | 
						|
	   be overriden with the bank1_types module param. For all 3 known
 | 
						|
	   revison 1 motherboards the correct use of this param is:
 | 
						|
	   bank1_types=1,1,0,0,0,0,0,2,0,0,0,0,2,0,0,1
 | 
						|
	   You may also need to specify the fan_sensors option for these boards
 | 
						|
	   fan_sensors=5
 | 
						|
	2) There is a separate abituguru3 driver for these motherboards,
 | 
						|
	   the abituguru (without the 3 !) driver will not work on these
 | 
						|
	   motherboards (and visa versa)!
 | 
						|
 | 
						|
Authors:
 | 
						|
	Hans de Goede <j.w.r.degoede@hhs.nl>,
 | 
						|
	(Initial reverse engineering done by Olle Sandberg
 | 
						|
	 <ollebull@gmail.com>)
 | 
						|
 | 
						|
 | 
						|
Module Parameters
 | 
						|
-----------------
 | 
						|
 | 
						|
* force: bool		Force detection. Note this parameter only causes the
 | 
						|
			detection to be skipped, and thus the insmod to
 | 
						|
			succeed. If the uGuru can't be read the actual hwmon
 | 
						|
			driver will not load and thus no hwmon device will get
 | 
						|
			registered.
 | 
						|
* bank1_types: int[]	Bank1 sensortype autodetection override:
 | 
						|
			  -1 autodetect (default)
 | 
						|
			   0 volt sensor
 | 
						|
			   1 temp sensor
 | 
						|
			   2 not connected
 | 
						|
* fan_sensors: int	Tell the driver how many fan speed sensors there are
 | 
						|
			on your motherboard. Default: 0 (autodetect).
 | 
						|
* pwms: int		Tell the driver how many fan speed controls (fan
 | 
						|
			pwms) your motherboard has. Default: 0 (autodetect).
 | 
						|
* verbose: int		How verbose should the driver be? (0-3):
 | 
						|
			   0 normal output
 | 
						|
			   1 + verbose error reporting
 | 
						|
			   2 + sensors type probing info (default)
 | 
						|
			   3 + retryable error reporting
 | 
						|
			Default: 2 (the driver is still in the testing phase)
 | 
						|
 | 
						|
Notice if you need any of the first three options above please insmod the
 | 
						|
driver with verbose set to 3 and mail me <j.w.r.degoede@hhs.nl> the output of:
 | 
						|
dmesg | grep abituguru
 | 
						|
 | 
						|
 | 
						|
Description
 | 
						|
-----------
 | 
						|
 | 
						|
This driver supports the hardware monitoring features of the first and
 | 
						|
second revision of the Abit uGuru chip found on Abit uGuru featuring
 | 
						|
motherboards (most modern Abit motherboards).
 | 
						|
 | 
						|
The first and second revision of the uGuru chip in reality is a Winbond
 | 
						|
W83L950D in disguise (despite Abit claiming it is "a new microprocessor
 | 
						|
designed by the ABIT Engineers"). Unfortunately this doesn't help since the
 | 
						|
W83L950D is a generic microcontroller with a custom Abit application running
 | 
						|
on it.
 | 
						|
 | 
						|
Despite Abit not releasing any information regarding the uGuru, Olle
 | 
						|
Sandberg <ollebull@gmail.com> has managed to reverse engineer the sensor part
 | 
						|
of the uGuru. Without his work this driver would not have been possible.
 | 
						|
 | 
						|
Known Issues
 | 
						|
------------
 | 
						|
 | 
						|
The voltage and frequency control parts of the Abit uGuru are not supported.
 |