linux-pinenote/drivers/net/wireless/ath/ath9k
Felix Fietkau 4254bc1c4d ath9k_hw: fix a noise floor calibration related race condition
On AR5008-AR9002, other forms of calibration must not be started while
the noise floor calibration is running, as this can create invalid
readings which were sometimes not even recoverable by any further
calibration attempts.

This patch also ensures that the result of noise floor measurements
are processed faster and also allows the result of the initial
calibration on reset to make it into the NF history buffer

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-04 15:27:37 -04:00
..
ahb.c drivers/net/wireless: Use wiphy_<level> 2010-07-27 15:14:13 -04:00
ani.c ath9k: add new ANI implementation for AR9003 2010-06-14 15:39:29 -04:00
ani.h ath9k: add new ANI implementation for AR9003 2010-06-14 15:39:29 -04:00
ar5008_initvals.h ath9k_hw: reformat the ar5008, ar9001 and ar9002 initvals to match ar9003 2010-07-02 13:44:34 -04:00
ar5008_phy.c ath9k_hw: fix invalid extension channel noisefloor readings in HT20 2010-07-26 15:32:42 -04:00
ar9001_initvals.h ath9k_hw: sync initvals for ar9001 and ar9002 with Atheros 2010-07-02 13:44:35 -04:00
ar9002_calib.c ath9k_hw: fix a noise floor calibration related race condition 2010-08-04 15:27:37 -04:00
ar9002_hw.c ath9k_hw: remove initvals for hardware which was never sold 2010-07-14 13:52:46 -04:00
ar9002_initvals.h ath9k_hw: remove initvals for hardware which was never sold 2010-07-14 13:52:46 -04:00
ar9002_mac.c ath9k_hw: report the TID in the tx status on AR5008-AR9002 2010-07-12 16:05:38 -04:00
ar9002_phy.c ath9k_hw: fix invalid extension channel noisefloor readings in HT20 2010-07-26 15:32:42 -04:00
ar9002_phy.h ath9k_hw: sanitize noise floor values properly on all chips 2010-07-02 13:44:36 -04:00
ar9003_2p0_initvals.h ath9k_hw: update 5 GHz tx gain tables for femless and high power PA 2010-06-14 15:39:30 -04:00
ar9003_2p2_initvals.h ath9k_hw: update 5 GHz tx gain tables for femless and high power PA 2010-06-14 15:39:30 -04:00
ar9003_calib.c ath9k_hw: clean up per-channel calibration data 2010-08-04 15:27:37 -04:00
ar9003_eeprom.c ath9k_hw: fix antenna diversity on AR9285 2010-07-12 16:05:37 -04:00
ar9003_eeprom.h ath9k_hw: add support for parsing PA predistortion related EEPROM fields 2010-06-14 15:39:32 -04:00
ar9003_hw.c ath9k_hw: dynamically choose the SERDES array for low power 2010-06-23 15:14:03 -04:00
ar9003_mac.c ath9k_hw: Fix AR9003 MPDU delimeter CRC check for middle subframes 2010-07-16 14:03:42 -04:00
ar9003_mac.h ath9k_hw: report the TID in the tx status on AR5008-AR9002 2010-07-12 16:05:38 -04:00
ar9003_paprd.c ath9k_hw: clean up per-channel calibration data 2010-08-04 15:27:37 -04:00
ar9003_phy.c ath9k_hw: fix analog shift register writes on AR9003 2010-08-04 15:27:37 -04:00
ar9003_phy.h ath9k_hw: add register definitions related to PA predistortion 2010-06-14 15:39:32 -04:00
ath9k.h ath9k_hw: clean up per-channel calibration data 2010-08-04 15:27:37 -04:00
beacon.c ath9k: remove duplicate WMM AC definitions 2010-06-14 15:39:30 -04:00
btcoex.c
btcoex.h
calib.c ath9k_hw: fix a noise floor calibration related race condition 2010-08-04 15:27:37 -04:00
calib.h ath9k_hw: fix a noise floor calibration related race condition 2010-08-04 15:27:37 -04:00
common.c ath9k: fix crash with WEP in ad-hoc mode 2010-07-02 13:44:38 -04:00
common.h ath9k_common: Move count_streams to common module 2010-06-04 16:00:39 -04:00
debug.c ath9k: add a debugfs entry for ignoring CCA on the extension channel in HT40 2010-06-14 15:39:31 -04:00
debug.h ath9k: enable the baseband watchdog events for AR9003 2010-06-02 16:13:00 -04:00
eeprom.c ath9k_hw: Cleanup TX power calculation for AR9287 2010-06-03 14:10:46 -04:00
eeprom.h ath9k_hw: fix antenna diversity on AR9285 2010-07-12 16:05:37 -04:00
eeprom_4k.c ath9k: remove unneeded calculation of minimal calibration power 2010-07-14 13:52:45 -04:00
eeprom_9287.c ath9k: remove unneeded calculation of minimal calibration power 2010-07-14 13:52:45 -04:00
eeprom_def.c ath9k: remove unneeded calculation of minimal calibration power 2010-07-14 13:52:45 -04:00
gpio.c ath9k: Add a module parameter to disable led blinking. 2010-06-23 15:14:05 -04:00
hif_usb.c Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 2010-07-13 15:31:51 -04:00
hif_usb.h ath9k_htc: Add support for AR7010 2010-06-04 16:00:39 -04:00
htc.h ath9k_hw: clean up per-channel calibration data 2010-08-04 15:27:37 -04:00
htc_drv_beacon.c ath9k_htc: use common WMM AC definitions instead of ath9k ones 2010-06-14 15:39:30 -04:00
htc_drv_init.c ath9k_htc: Update supported product list 2010-06-18 15:05:12 -04:00
htc_drv_main.c ath9k_hw: clean up per-channel calibration data 2010-08-04 15:27:37 -04:00
htc_drv_txrx.c ath9k_htc: Fix ampdu_action callback 2010-06-15 16:02:22 -04:00
htc_hst.c ath9k_htc: Configure credit size for AR7010 2010-06-04 16:00:39 -04:00
htc_hst.h ath9k_htc: Fix array overflow 2010-05-12 16:39:06 -04:00
hw-ops.h ath9k: merge noisefloor load implementations 2010-07-12 16:05:39 -04:00
hw.c ath9k_hw: clean up per-channel calibration data 2010-08-04 15:27:37 -04:00
hw.h ath9k_hw: fix a noise floor calibration related race condition 2010-08-04 15:27:37 -04:00
init.c ath9k: fix panic while cleaning up virtaul wifis 2010-07-14 13:52:45 -04:00
Kconfig
mac.c ath9k_hw: avoid setting cwmin/cwmax to 0 for IBSS for AR9003 2010-06-15 16:02:22 -04:00
mac.h ath9k_hw: report the TID in the tx status on AR5008-AR9002 2010-07-12 16:05:38 -04:00
main.c ath9k_hw: clean up per-channel calibration data 2010-08-04 15:27:37 -04:00
Makefile ath9k_hw: add functions for controlling PA predistortion calibration 2010-06-14 15:39:32 -04:00
pci.c drivers/net/wireless: Use wiphy_<level> 2010-07-27 15:14:13 -04:00
phy.h ath9k_hw: add OFDM spur mitigation for AR9003 2010-04-16 15:43:38 -04:00
rc.c ath9k: remove unused base_index from rate table. 2010-07-27 14:59:59 -04:00
rc.h ath9k: remove unused base_index from rate table. 2010-07-27 14:59:59 -04:00
recv.c ath9k_hw: remove a useless function for setting the mac address 2010-06-14 15:39:31 -04:00
reg.h ath9k_htc: Add LED support for AR7010 2010-06-30 15:00:53 -04:00
virtual.c ath9k: Fix inconsistency between txq->stopped and the actual queue state 2010-07-26 15:32:41 -04:00
wmi.c ath9k: cleanup: remove unneeded null check 2010-06-02 16:13:33 -04:00
wmi.h ath9k_htc: Increase WMI timeout value 2010-04-26 14:21:20 -04:00
xmit.c ath9k_hw: clean up per-channel calibration data 2010-08-04 15:27:37 -04:00