fda9b7afa7
Eeprom read functions are of bool type and not int. Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
328 lines
8.8 KiB
C
328 lines
8.8 KiB
C
/*
|
|
* Copyright (c) 2008-2009 Atheros Communications Inc.
|
|
*
|
|
* Permission to use, copy, modify, and/or distribute this software for any
|
|
* purpose with or without fee is hereby granted, provided that the above
|
|
* copyright notice and this permission notice appear in all copies.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
|
|
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
|
|
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
|
|
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
|
|
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
|
|
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
|
|
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
|
|
*/
|
|
|
|
#include <linux/nl80211.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/pci-aspm.h>
|
|
#include "../ath.h"
|
|
#include "ath5k.h"
|
|
#include "debug.h"
|
|
#include "base.h"
|
|
#include "reg.h"
|
|
|
|
/* Known PCI ids */
|
|
static DEFINE_PCI_DEVICE_TABLE(ath5k_pci_id_table) = {
|
|
{ PCI_VDEVICE(ATHEROS, 0x0207) }, /* 5210 early */
|
|
{ PCI_VDEVICE(ATHEROS, 0x0007) }, /* 5210 */
|
|
{ PCI_VDEVICE(ATHEROS, 0x0011) }, /* 5311 - this is on AHB bus !*/
|
|
{ PCI_VDEVICE(ATHEROS, 0x0012) }, /* 5211 */
|
|
{ PCI_VDEVICE(ATHEROS, 0x0013) }, /* 5212 */
|
|
{ PCI_VDEVICE(3COM_2, 0x0013) }, /* 3com 5212 */
|
|
{ PCI_VDEVICE(3COM, 0x0013) }, /* 3com 3CRDAG675 5212 */
|
|
{ PCI_VDEVICE(ATHEROS, 0x1014) }, /* IBM minipci 5212 */
|
|
{ PCI_VDEVICE(ATHEROS, 0x0014) }, /* 5212 combatible */
|
|
{ PCI_VDEVICE(ATHEROS, 0x0015) }, /* 5212 combatible */
|
|
{ PCI_VDEVICE(ATHEROS, 0x0016) }, /* 5212 combatible */
|
|
{ PCI_VDEVICE(ATHEROS, 0x0017) }, /* 5212 combatible */
|
|
{ PCI_VDEVICE(ATHEROS, 0x0018) }, /* 5212 combatible */
|
|
{ PCI_VDEVICE(ATHEROS, 0x0019) }, /* 5212 combatible */
|
|
{ PCI_VDEVICE(ATHEROS, 0x001a) }, /* 2413 Griffin-lite */
|
|
{ PCI_VDEVICE(ATHEROS, 0x001b) }, /* 5413 Eagle */
|
|
{ PCI_VDEVICE(ATHEROS, 0x001c) }, /* PCI-E cards */
|
|
{ PCI_VDEVICE(ATHEROS, 0x001d) }, /* 2417 Nala */
|
|
{ 0 }
|
|
};
|
|
MODULE_DEVICE_TABLE(pci, ath5k_pci_id_table);
|
|
|
|
/* return bus cachesize in 4B word units */
|
|
static void ath5k_pci_read_cachesize(struct ath_common *common, int *csz)
|
|
{
|
|
struct ath5k_softc *sc = (struct ath5k_softc *) common->priv;
|
|
u8 u8tmp;
|
|
|
|
pci_read_config_byte(sc->pdev, PCI_CACHE_LINE_SIZE, &u8tmp);
|
|
*csz = (int)u8tmp;
|
|
|
|
/*
|
|
* This check was put in to avoid "unplesant" consequences if
|
|
* the bootrom has not fully initialized all PCI devices.
|
|
* Sometimes the cache line size register is not set
|
|
*/
|
|
|
|
if (*csz == 0)
|
|
*csz = L1_CACHE_BYTES >> 2; /* Use the default size */
|
|
}
|
|
|
|
/*
|
|
* Read from eeprom
|
|
*/
|
|
static bool
|
|
ath5k_pci_eeprom_read(struct ath_common *common, u32 offset, u16 *data)
|
|
{
|
|
struct ath5k_hw *ah = (struct ath5k_hw *) common->ah;
|
|
u32 status, timeout;
|
|
|
|
/*
|
|
* Initialize EEPROM access
|
|
*/
|
|
if (ah->ah_version == AR5K_AR5210) {
|
|
AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG, AR5K_PCICFG_EEAE);
|
|
(void)ath5k_hw_reg_read(ah, AR5K_EEPROM_BASE + (4 * offset));
|
|
} else {
|
|
ath5k_hw_reg_write(ah, offset, AR5K_EEPROM_BASE);
|
|
AR5K_REG_ENABLE_BITS(ah, AR5K_EEPROM_CMD,
|
|
AR5K_EEPROM_CMD_READ);
|
|
}
|
|
|
|
for (timeout = AR5K_TUNE_REGISTER_TIMEOUT; timeout > 0; timeout--) {
|
|
status = ath5k_hw_reg_read(ah, AR5K_EEPROM_STATUS);
|
|
if (status & AR5K_EEPROM_STAT_RDDONE) {
|
|
if (status & AR5K_EEPROM_STAT_RDERR)
|
|
return false;
|
|
*data = (u16)(ath5k_hw_reg_read(ah, AR5K_EEPROM_DATA) &
|
|
0xffff);
|
|
return true;
|
|
}
|
|
udelay(15);
|
|
}
|
|
|
|
return false;
|
|
}
|
|
|
|
int ath5k_hw_read_srev(struct ath5k_hw *ah)
|
|
{
|
|
ah->ah_mac_srev = ath5k_hw_reg_read(ah, AR5K_SREV);
|
|
return 0;
|
|
}
|
|
|
|
/* Common ath_bus_opts structure */
|
|
static const struct ath_bus_ops ath_pci_bus_ops = {
|
|
.ath_bus_type = ATH_PCI,
|
|
.read_cachesize = ath5k_pci_read_cachesize,
|
|
.eeprom_read = ath5k_pci_eeprom_read,
|
|
};
|
|
|
|
/********************\
|
|
* PCI Initialization *
|
|
\********************/
|
|
|
|
static int __devinit
|
|
ath5k_pci_probe(struct pci_dev *pdev,
|
|
const struct pci_device_id *id)
|
|
{
|
|
void __iomem *mem;
|
|
struct ath5k_softc *sc;
|
|
struct ieee80211_hw *hw;
|
|
int ret;
|
|
u8 csz;
|
|
|
|
/*
|
|
* L0s needs to be disabled on all ath5k cards.
|
|
*
|
|
* For distributions shipping with CONFIG_PCIEASPM (this will be enabled
|
|
* by default in the future in 2.6.36) this will also mean both L1 and
|
|
* L0s will be disabled when a pre 1.1 PCIe device is detected. We do
|
|
* know L1 works correctly even for all ath5k pre 1.1 PCIe devices
|
|
* though but cannot currently undue the effect of a blacklist, for
|
|
* details you can read pcie_aspm_sanity_check() and see how it adjusts
|
|
* the device link capability.
|
|
*
|
|
* It may be possible in the future to implement some PCI API to allow
|
|
* drivers to override blacklists for pre 1.1 PCIe but for now it is
|
|
* best to accept that both L0s and L1 will be disabled completely for
|
|
* distributions shipping with CONFIG_PCIEASPM rather than having this
|
|
* issue present. Motivation for adding this new API will be to help
|
|
* with power consumption for some of these devices.
|
|
*/
|
|
pci_disable_link_state(pdev, PCIE_LINK_STATE_L0S);
|
|
|
|
ret = pci_enable_device(pdev);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "can't enable device\n");
|
|
goto err;
|
|
}
|
|
|
|
/* XXX 32-bit addressing only */
|
|
ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "32-bit DMA not available\n");
|
|
goto err_dis;
|
|
}
|
|
|
|
/*
|
|
* Cache line size is used to size and align various
|
|
* structures used to communicate with the hardware.
|
|
*/
|
|
pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &csz);
|
|
if (csz == 0) {
|
|
/*
|
|
* Linux 2.4.18 (at least) writes the cache line size
|
|
* register as a 16-bit wide register which is wrong.
|
|
* We must have this setup properly for rx buffer
|
|
* DMA to work so force a reasonable value here if it
|
|
* comes up zero.
|
|
*/
|
|
csz = L1_CACHE_BYTES >> 2;
|
|
pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE, csz);
|
|
}
|
|
/*
|
|
* The default setting of latency timer yields poor results,
|
|
* set it to the value used by other systems. It may be worth
|
|
* tweaking this setting more.
|
|
*/
|
|
pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0xa8);
|
|
|
|
/* Enable bus mastering */
|
|
pci_set_master(pdev);
|
|
|
|
/*
|
|
* Disable the RETRY_TIMEOUT register (0x41) to keep
|
|
* PCI Tx retries from interfering with C3 CPU state.
|
|
*/
|
|
pci_write_config_byte(pdev, 0x41, 0);
|
|
|
|
ret = pci_request_region(pdev, 0, "ath5k");
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "cannot reserve PCI memory region\n");
|
|
goto err_dis;
|
|
}
|
|
|
|
mem = pci_iomap(pdev, 0, 0);
|
|
if (!mem) {
|
|
dev_err(&pdev->dev, "cannot remap PCI memory region\n") ;
|
|
ret = -EIO;
|
|
goto err_reg;
|
|
}
|
|
|
|
/*
|
|
* Allocate hw (mac80211 main struct)
|
|
* and hw->priv (driver private data)
|
|
*/
|
|
hw = ieee80211_alloc_hw(sizeof(*sc), &ath5k_hw_ops);
|
|
if (hw == NULL) {
|
|
dev_err(&pdev->dev, "cannot allocate ieee80211_hw\n");
|
|
ret = -ENOMEM;
|
|
goto err_map;
|
|
}
|
|
|
|
dev_info(&pdev->dev, "registered as '%s'\n", wiphy_name(hw->wiphy));
|
|
|
|
sc = hw->priv;
|
|
sc->hw = hw;
|
|
sc->pdev = pdev;
|
|
sc->dev = &pdev->dev;
|
|
sc->irq = pdev->irq;
|
|
sc->devid = id->device;
|
|
sc->iobase = mem; /* So we can unmap it on detach */
|
|
|
|
/* Initialize */
|
|
ret = ath5k_init_softc(sc, &ath_pci_bus_ops);
|
|
if (ret)
|
|
goto err_free;
|
|
|
|
/* Set private data */
|
|
pci_set_drvdata(pdev, hw);
|
|
|
|
return 0;
|
|
err_free:
|
|
ieee80211_free_hw(hw);
|
|
err_map:
|
|
pci_iounmap(pdev, mem);
|
|
err_reg:
|
|
pci_release_region(pdev, 0);
|
|
err_dis:
|
|
pci_disable_device(pdev);
|
|
err:
|
|
return ret;
|
|
}
|
|
|
|
static void __devexit
|
|
ath5k_pci_remove(struct pci_dev *pdev)
|
|
{
|
|
struct ieee80211_hw *hw = pci_get_drvdata(pdev);
|
|
struct ath5k_softc *sc = hw->priv;
|
|
|
|
ath5k_deinit_softc(sc);
|
|
pci_iounmap(pdev, sc->iobase);
|
|
pci_release_region(pdev, 0);
|
|
pci_disable_device(pdev);
|
|
ieee80211_free_hw(hw);
|
|
}
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static int ath5k_pci_suspend(struct device *dev)
|
|
{
|
|
struct ath5k_softc *sc = pci_get_drvdata(to_pci_dev(dev));
|
|
|
|
ath5k_led_off(sc);
|
|
return 0;
|
|
}
|
|
|
|
static int ath5k_pci_resume(struct device *dev)
|
|
{
|
|
struct pci_dev *pdev = to_pci_dev(dev);
|
|
struct ath5k_softc *sc = pci_get_drvdata(pdev);
|
|
|
|
/*
|
|
* Suspend/Resume resets the PCI configuration space, so we have to
|
|
* re-disable the RETRY_TIMEOUT register (0x41) to keep
|
|
* PCI Tx retries from interfering with C3 CPU state
|
|
*/
|
|
pci_write_config_byte(pdev, 0x41, 0);
|
|
|
|
ath5k_led_enable(sc);
|
|
return 0;
|
|
}
|
|
|
|
static SIMPLE_DEV_PM_OPS(ath5k_pm_ops, ath5k_pci_suspend, ath5k_pci_resume);
|
|
#define ATH5K_PM_OPS (&ath5k_pm_ops)
|
|
#else
|
|
#define ATH5K_PM_OPS NULL
|
|
#endif /* CONFIG_PM_SLEEP */
|
|
|
|
static struct pci_driver ath5k_pci_driver = {
|
|
.name = KBUILD_MODNAME,
|
|
.id_table = ath5k_pci_id_table,
|
|
.probe = ath5k_pci_probe,
|
|
.remove = __devexit_p(ath5k_pci_remove),
|
|
.driver.pm = ATH5K_PM_OPS,
|
|
};
|
|
|
|
/*
|
|
* Module init/exit functions
|
|
*/
|
|
static int __init
|
|
init_ath5k_pci(void)
|
|
{
|
|
int ret;
|
|
|
|
ret = pci_register_driver(&ath5k_pci_driver);
|
|
if (ret) {
|
|
printk(KERN_ERR "ath5k_pci: can't register pci driver\n");
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void __exit
|
|
exit_ath5k_pci(void)
|
|
{
|
|
pci_unregister_driver(&ath5k_pci_driver);
|
|
}
|
|
|
|
module_init(init_ath5k_pci);
|
|
module_exit(exit_ath5k_pci);
|