 67158cebde
			
		
	
	
	67158cebde
	
	
	
		
			
			The device is very similar to (0x0fe6, 0x8101), And works well with dm9601 driver. Signed-off-by: Shahar Havivi <shaharh@redhat.com> Acked-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
		
			
				
	
	
		
			690 lines
		
	
	
	
		
			16 KiB
			
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			690 lines
		
	
	
	
		
			16 KiB
			
		
	
	
	
		
			C
		
	
	
	
	
	
| /*
 | |
|  * Davicom DM9601 USB 1.1 10/100Mbps ethernet devices
 | |
|  *
 | |
|  * Peter Korsgaard <jacmet@sunsite.dk>
 | |
|  *
 | |
|  * This file is licensed under the terms of the GNU General Public License
 | |
|  * version 2.  This program is licensed "as is" without any warranty of any
 | |
|  * kind, whether express or implied.
 | |
|  */
 | |
| 
 | |
| //#define DEBUG
 | |
| 
 | |
| #include <linux/module.h>
 | |
| #include <linux/sched.h>
 | |
| #include <linux/stddef.h>
 | |
| #include <linux/init.h>
 | |
| #include <linux/netdevice.h>
 | |
| #include <linux/etherdevice.h>
 | |
| #include <linux/ethtool.h>
 | |
| #include <linux/mii.h>
 | |
| #include <linux/usb.h>
 | |
| #include <linux/crc32.h>
 | |
| #include <linux/usb/usbnet.h>
 | |
| #include <linux/slab.h>
 | |
| 
 | |
| /* datasheet:
 | |
|  http://ptm2.cc.utu.fi/ftp/network/cards/DM9601/From_NET/DM9601-DS-P01-930914.pdf
 | |
| */
 | |
| 
 | |
| /* control requests */
 | |
| #define DM_READ_REGS	0x00
 | |
| #define DM_WRITE_REGS	0x01
 | |
| #define DM_READ_MEMS	0x02
 | |
| #define DM_WRITE_REG	0x03
 | |
| #define DM_WRITE_MEMS	0x05
 | |
| #define DM_WRITE_MEM	0x07
 | |
| 
 | |
| /* registers */
 | |
| #define DM_NET_CTRL	0x00
 | |
| #define DM_RX_CTRL	0x05
 | |
| #define DM_SHARED_CTRL	0x0b
 | |
| #define DM_SHARED_ADDR	0x0c
 | |
| #define DM_SHARED_DATA	0x0d	/* low + high */
 | |
| #define DM_PHY_ADDR	0x10	/* 6 bytes */
 | |
| #define DM_MCAST_ADDR	0x16	/* 8 bytes */
 | |
| #define DM_GPR_CTRL	0x1e
 | |
| #define DM_GPR_DATA	0x1f
 | |
| 
 | |
| #define DM_MAX_MCAST	64
 | |
| #define DM_MCAST_SIZE	8
 | |
| #define DM_EEPROM_LEN	256
 | |
| #define DM_TX_OVERHEAD	2	/* 2 byte header */
 | |
| #define DM_RX_OVERHEAD	7	/* 3 byte header + 4 byte crc tail */
 | |
| #define DM_TIMEOUT	1000
 | |
| 
 | |
| 
 | |
| static int dm_read(struct usbnet *dev, u8 reg, u16 length, void *data)
 | |
| {
 | |
| 	void *buf;
 | |
| 	int err = -ENOMEM;
 | |
| 
 | |
| 	netdev_dbg(dev->net, "dm_read() reg=0x%02x length=%d\n", reg, length);
 | |
| 
 | |
| 	buf = kmalloc(length, GFP_KERNEL);
 | |
| 	if (!buf)
 | |
| 		goto out;
 | |
| 
 | |
| 	err = usb_control_msg(dev->udev,
 | |
| 			      usb_rcvctrlpipe(dev->udev, 0),
 | |
| 			      DM_READ_REGS,
 | |
| 			      USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
 | |
| 			      0, reg, buf, length, USB_CTRL_SET_TIMEOUT);
 | |
| 	if (err == length)
 | |
| 		memcpy(data, buf, length);
 | |
| 	else if (err >= 0)
 | |
| 		err = -EINVAL;
 | |
| 	kfree(buf);
 | |
| 
 | |
|  out:
 | |
| 	return err;
 | |
| }
 | |
| 
 | |
| static int dm_read_reg(struct usbnet *dev, u8 reg, u8 *value)
 | |
| {
 | |
| 	return dm_read(dev, reg, 1, value);
 | |
| }
 | |
| 
 | |
| static int dm_write(struct usbnet *dev, u8 reg, u16 length, void *data)
 | |
| {
 | |
| 	void *buf = NULL;
 | |
| 	int err = -ENOMEM;
 | |
| 
 | |
| 	netdev_dbg(dev->net, "dm_write() reg=0x%02x, length=%d\n", reg, length);
 | |
| 
 | |
| 	if (data) {
 | |
| 		buf = kmemdup(data, length, GFP_KERNEL);
 | |
| 		if (!buf)
 | |
| 			goto out;
 | |
| 	}
 | |
| 
 | |
| 	err = usb_control_msg(dev->udev,
 | |
| 			      usb_sndctrlpipe(dev->udev, 0),
 | |
| 			      DM_WRITE_REGS,
 | |
| 			      USB_DIR_OUT | USB_TYPE_VENDOR |USB_RECIP_DEVICE,
 | |
| 			      0, reg, buf, length, USB_CTRL_SET_TIMEOUT);
 | |
| 	kfree(buf);
 | |
| 	if (err >= 0 && err < length)
 | |
| 		err = -EINVAL;
 | |
|  out:
 | |
| 	return err;
 | |
| }
 | |
| 
 | |
| static int dm_write_reg(struct usbnet *dev, u8 reg, u8 value)
 | |
| {
 | |
| 	netdev_dbg(dev->net, "dm_write_reg() reg=0x%02x, value=0x%02x\n",
 | |
| 		   reg, value);
 | |
| 	return usb_control_msg(dev->udev,
 | |
| 			       usb_sndctrlpipe(dev->udev, 0),
 | |
| 			       DM_WRITE_REG,
 | |
| 			       USB_DIR_OUT | USB_TYPE_VENDOR |USB_RECIP_DEVICE,
 | |
| 			       value, reg, NULL, 0, USB_CTRL_SET_TIMEOUT);
 | |
| }
 | |
| 
 | |
| static void dm_write_async_callback(struct urb *urb)
 | |
| {
 | |
| 	struct usb_ctrlrequest *req = (struct usb_ctrlrequest *)urb->context;
 | |
| 	int status = urb->status;
 | |
| 
 | |
| 	if (status < 0)
 | |
| 		printk(KERN_DEBUG "dm_write_async_callback() failed with %d\n",
 | |
| 		       status);
 | |
| 
 | |
| 	kfree(req);
 | |
| 	usb_free_urb(urb);
 | |
| }
 | |
| 
 | |
| static void dm_write_async_helper(struct usbnet *dev, u8 reg, u8 value,
 | |
| 				  u16 length, void *data)
 | |
| {
 | |
| 	struct usb_ctrlrequest *req;
 | |
| 	struct urb *urb;
 | |
| 	int status;
 | |
| 
 | |
| 	urb = usb_alloc_urb(0, GFP_ATOMIC);
 | |
| 	if (!urb) {
 | |
| 		netdev_err(dev->net, "Error allocating URB in dm_write_async_helper!\n");
 | |
| 		return;
 | |
| 	}
 | |
| 
 | |
| 	req = kmalloc(sizeof(struct usb_ctrlrequest), GFP_ATOMIC);
 | |
| 	if (!req) {
 | |
| 		netdev_err(dev->net, "Failed to allocate memory for control request\n");
 | |
| 		usb_free_urb(urb);
 | |
| 		return;
 | |
| 	}
 | |
| 
 | |
| 	req->bRequestType = USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE;
 | |
| 	req->bRequest = length ? DM_WRITE_REGS : DM_WRITE_REG;
 | |
| 	req->wValue = cpu_to_le16(value);
 | |
| 	req->wIndex = cpu_to_le16(reg);
 | |
| 	req->wLength = cpu_to_le16(length);
 | |
| 
 | |
| 	usb_fill_control_urb(urb, dev->udev,
 | |
| 			     usb_sndctrlpipe(dev->udev, 0),
 | |
| 			     (void *)req, data, length,
 | |
| 			     dm_write_async_callback, req);
 | |
| 
 | |
| 	status = usb_submit_urb(urb, GFP_ATOMIC);
 | |
| 	if (status < 0) {
 | |
| 		netdev_err(dev->net, "Error submitting the control message: status=%d\n",
 | |
| 			   status);
 | |
| 		kfree(req);
 | |
| 		usb_free_urb(urb);
 | |
| 	}
 | |
| }
 | |
| 
 | |
| static void dm_write_async(struct usbnet *dev, u8 reg, u16 length, void *data)
 | |
| {
 | |
| 	netdev_dbg(dev->net, "dm_write_async() reg=0x%02x length=%d\n", reg, length);
 | |
| 
 | |
| 	dm_write_async_helper(dev, reg, 0, length, data);
 | |
| }
 | |
| 
 | |
| static void dm_write_reg_async(struct usbnet *dev, u8 reg, u8 value)
 | |
| {
 | |
| 	netdev_dbg(dev->net, "dm_write_reg_async() reg=0x%02x value=0x%02x\n",
 | |
| 		   reg, value);
 | |
| 
 | |
| 	dm_write_async_helper(dev, reg, value, 0, NULL);
 | |
| }
 | |
| 
 | |
| static int dm_read_shared_word(struct usbnet *dev, int phy, u8 reg, __le16 *value)
 | |
| {
 | |
| 	int ret, i;
 | |
| 
 | |
| 	mutex_lock(&dev->phy_mutex);
 | |
| 
 | |
| 	dm_write_reg(dev, DM_SHARED_ADDR, phy ? (reg | 0x40) : reg);
 | |
| 	dm_write_reg(dev, DM_SHARED_CTRL, phy ? 0xc : 0x4);
 | |
| 
 | |
| 	for (i = 0; i < DM_TIMEOUT; i++) {
 | |
| 		u8 tmp;
 | |
| 
 | |
| 		udelay(1);
 | |
| 		ret = dm_read_reg(dev, DM_SHARED_CTRL, &tmp);
 | |
| 		if (ret < 0)
 | |
| 			goto out;
 | |
| 
 | |
| 		/* ready */
 | |
| 		if ((tmp & 1) == 0)
 | |
| 			break;
 | |
| 	}
 | |
| 
 | |
| 	if (i == DM_TIMEOUT) {
 | |
| 		netdev_err(dev->net, "%s read timed out!\n", phy ? "phy" : "eeprom");
 | |
| 		ret = -EIO;
 | |
| 		goto out;
 | |
| 	}
 | |
| 
 | |
| 	dm_write_reg(dev, DM_SHARED_CTRL, 0x0);
 | |
| 	ret = dm_read(dev, DM_SHARED_DATA, 2, value);
 | |
| 
 | |
| 	netdev_dbg(dev->net, "read shared %d 0x%02x returned 0x%04x, %d\n",
 | |
| 		   phy, reg, *value, ret);
 | |
| 
 | |
|  out:
 | |
| 	mutex_unlock(&dev->phy_mutex);
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| static int dm_write_shared_word(struct usbnet *dev, int phy, u8 reg, __le16 value)
 | |
| {
 | |
| 	int ret, i;
 | |
| 
 | |
| 	mutex_lock(&dev->phy_mutex);
 | |
| 
 | |
| 	ret = dm_write(dev, DM_SHARED_DATA, 2, &value);
 | |
| 	if (ret < 0)
 | |
| 		goto out;
 | |
| 
 | |
| 	dm_write_reg(dev, DM_SHARED_ADDR, phy ? (reg | 0x40) : reg);
 | |
| 	dm_write_reg(dev, DM_SHARED_CTRL, phy ? 0x1a : 0x12);
 | |
| 
 | |
| 	for (i = 0; i < DM_TIMEOUT; i++) {
 | |
| 		u8 tmp;
 | |
| 
 | |
| 		udelay(1);
 | |
| 		ret = dm_read_reg(dev, DM_SHARED_CTRL, &tmp);
 | |
| 		if (ret < 0)
 | |
| 			goto out;
 | |
| 
 | |
| 		/* ready */
 | |
| 		if ((tmp & 1) == 0)
 | |
| 			break;
 | |
| 	}
 | |
| 
 | |
| 	if (i == DM_TIMEOUT) {
 | |
| 		netdev_err(dev->net, "%s write timed out!\n", phy ? "phy" : "eeprom");
 | |
| 		ret = -EIO;
 | |
| 		goto out;
 | |
| 	}
 | |
| 
 | |
| 	dm_write_reg(dev, DM_SHARED_CTRL, 0x0);
 | |
| 
 | |
| out:
 | |
| 	mutex_unlock(&dev->phy_mutex);
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| static int dm_read_eeprom_word(struct usbnet *dev, u8 offset, void *value)
 | |
| {
 | |
| 	return dm_read_shared_word(dev, 0, offset, value);
 | |
| }
 | |
| 
 | |
| 
 | |
| 
 | |
| static int dm9601_get_eeprom_len(struct net_device *dev)
 | |
| {
 | |
| 	return DM_EEPROM_LEN;
 | |
| }
 | |
| 
 | |
| static int dm9601_get_eeprom(struct net_device *net,
 | |
| 			     struct ethtool_eeprom *eeprom, u8 * data)
 | |
| {
 | |
| 	struct usbnet *dev = netdev_priv(net);
 | |
| 	__le16 *ebuf = (__le16 *) data;
 | |
| 	int i;
 | |
| 
 | |
| 	/* access is 16bit */
 | |
| 	if ((eeprom->offset % 2) || (eeprom->len % 2))
 | |
| 		return -EINVAL;
 | |
| 
 | |
| 	for (i = 0; i < eeprom->len / 2; i++) {
 | |
| 		if (dm_read_eeprom_word(dev, eeprom->offset / 2 + i,
 | |
| 					&ebuf[i]) < 0)
 | |
| 			return -EINVAL;
 | |
| 	}
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int dm9601_mdio_read(struct net_device *netdev, int phy_id, int loc)
 | |
| {
 | |
| 	struct usbnet *dev = netdev_priv(netdev);
 | |
| 
 | |
| 	__le16 res;
 | |
| 
 | |
| 	if (phy_id) {
 | |
| 		netdev_dbg(dev->net, "Only internal phy supported\n");
 | |
| 		return 0;
 | |
| 	}
 | |
| 
 | |
| 	dm_read_shared_word(dev, 1, loc, &res);
 | |
| 
 | |
| 	netdev_dbg(dev->net,
 | |
| 		   "dm9601_mdio_read() phy_id=0x%02x, loc=0x%02x, returns=0x%04x\n",
 | |
| 		   phy_id, loc, le16_to_cpu(res));
 | |
| 
 | |
| 	return le16_to_cpu(res);
 | |
| }
 | |
| 
 | |
| static void dm9601_mdio_write(struct net_device *netdev, int phy_id, int loc,
 | |
| 			      int val)
 | |
| {
 | |
| 	struct usbnet *dev = netdev_priv(netdev);
 | |
| 	__le16 res = cpu_to_le16(val);
 | |
| 
 | |
| 	if (phy_id) {
 | |
| 		netdev_dbg(dev->net, "Only internal phy supported\n");
 | |
| 		return;
 | |
| 	}
 | |
| 
 | |
| 	netdev_dbg(dev->net, "dm9601_mdio_write() phy_id=0x%02x, loc=0x%02x, val=0x%04x\n",
 | |
| 		   phy_id, loc, val);
 | |
| 
 | |
| 	dm_write_shared_word(dev, 1, loc, res);
 | |
| }
 | |
| 
 | |
| static void dm9601_get_drvinfo(struct net_device *net,
 | |
| 			       struct ethtool_drvinfo *info)
 | |
| {
 | |
| 	/* Inherit standard device info */
 | |
| 	usbnet_get_drvinfo(net, info);
 | |
| 	info->eedump_len = DM_EEPROM_LEN;
 | |
| }
 | |
| 
 | |
| static u32 dm9601_get_link(struct net_device *net)
 | |
| {
 | |
| 	struct usbnet *dev = netdev_priv(net);
 | |
| 
 | |
| 	return mii_link_ok(&dev->mii);
 | |
| }
 | |
| 
 | |
| static int dm9601_ioctl(struct net_device *net, struct ifreq *rq, int cmd)
 | |
| {
 | |
| 	struct usbnet *dev = netdev_priv(net);
 | |
| 
 | |
| 	return generic_mii_ioctl(&dev->mii, if_mii(rq), cmd, NULL);
 | |
| }
 | |
| 
 | |
| static const struct ethtool_ops dm9601_ethtool_ops = {
 | |
| 	.get_drvinfo	= dm9601_get_drvinfo,
 | |
| 	.get_link	= dm9601_get_link,
 | |
| 	.get_msglevel	= usbnet_get_msglevel,
 | |
| 	.set_msglevel	= usbnet_set_msglevel,
 | |
| 	.get_eeprom_len	= dm9601_get_eeprom_len,
 | |
| 	.get_eeprom	= dm9601_get_eeprom,
 | |
| 	.get_settings	= usbnet_get_settings,
 | |
| 	.set_settings	= usbnet_set_settings,
 | |
| 	.nway_reset	= usbnet_nway_reset,
 | |
| };
 | |
| 
 | |
| static void dm9601_set_multicast(struct net_device *net)
 | |
| {
 | |
| 	struct usbnet *dev = netdev_priv(net);
 | |
| 	/* We use the 20 byte dev->data for our 8 byte filter buffer
 | |
| 	 * to avoid allocating memory that is tricky to free later */
 | |
| 	u8 *hashes = (u8 *) & dev->data;
 | |
| 	u8 rx_ctl = 0x31;
 | |
| 
 | |
| 	memset(hashes, 0x00, DM_MCAST_SIZE);
 | |
| 	hashes[DM_MCAST_SIZE - 1] |= 0x80;	/* broadcast address */
 | |
| 
 | |
| 	if (net->flags & IFF_PROMISC) {
 | |
| 		rx_ctl |= 0x02;
 | |
| 	} else if (net->flags & IFF_ALLMULTI ||
 | |
| 		   netdev_mc_count(net) > DM_MAX_MCAST) {
 | |
| 		rx_ctl |= 0x04;
 | |
| 	} else if (!netdev_mc_empty(net)) {
 | |
| 		struct netdev_hw_addr *ha;
 | |
| 
 | |
| 		netdev_for_each_mc_addr(ha, net) {
 | |
| 			u32 crc = ether_crc(ETH_ALEN, ha->addr) >> 26;
 | |
| 			hashes[crc >> 3] |= 1 << (crc & 0x7);
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	dm_write_async(dev, DM_MCAST_ADDR, DM_MCAST_SIZE, hashes);
 | |
| 	dm_write_reg_async(dev, DM_RX_CTRL, rx_ctl);
 | |
| }
 | |
| 
 | |
| static void __dm9601_set_mac_address(struct usbnet *dev)
 | |
| {
 | |
| 	dm_write_async(dev, DM_PHY_ADDR, ETH_ALEN, dev->net->dev_addr);
 | |
| }
 | |
| 
 | |
| static int dm9601_set_mac_address(struct net_device *net, void *p)
 | |
| {
 | |
| 	struct sockaddr *addr = p;
 | |
| 	struct usbnet *dev = netdev_priv(net);
 | |
| 
 | |
| 	if (!is_valid_ether_addr(addr->sa_data)) {
 | |
| 		dev_err(&net->dev, "not setting invalid mac address %pM\n",
 | |
| 								addr->sa_data);
 | |
| 		return -EINVAL;
 | |
| 	}
 | |
| 
 | |
| 	memcpy(net->dev_addr, addr->sa_data, net->addr_len);
 | |
| 	__dm9601_set_mac_address(dev);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static const struct net_device_ops dm9601_netdev_ops = {
 | |
| 	.ndo_open		= usbnet_open,
 | |
| 	.ndo_stop		= usbnet_stop,
 | |
| 	.ndo_start_xmit		= usbnet_start_xmit,
 | |
| 	.ndo_tx_timeout		= usbnet_tx_timeout,
 | |
| 	.ndo_change_mtu		= usbnet_change_mtu,
 | |
| 	.ndo_validate_addr	= eth_validate_addr,
 | |
| 	.ndo_do_ioctl 		= dm9601_ioctl,
 | |
| 	.ndo_set_multicast_list = dm9601_set_multicast,
 | |
| 	.ndo_set_mac_address	= dm9601_set_mac_address,
 | |
| };
 | |
| 
 | |
| static int dm9601_bind(struct usbnet *dev, struct usb_interface *intf)
 | |
| {
 | |
| 	int ret;
 | |
| 	u8 mac[ETH_ALEN];
 | |
| 
 | |
| 	ret = usbnet_get_endpoints(dev, intf);
 | |
| 	if (ret)
 | |
| 		goto out;
 | |
| 
 | |
| 	dev->net->netdev_ops = &dm9601_netdev_ops;
 | |
| 	dev->net->ethtool_ops = &dm9601_ethtool_ops;
 | |
| 	dev->net->hard_header_len += DM_TX_OVERHEAD;
 | |
| 	dev->hard_mtu = dev->net->mtu + dev->net->hard_header_len;
 | |
| 	dev->rx_urb_size = dev->net->mtu + ETH_HLEN + DM_RX_OVERHEAD;
 | |
| 
 | |
| 	dev->mii.dev = dev->net;
 | |
| 	dev->mii.mdio_read = dm9601_mdio_read;
 | |
| 	dev->mii.mdio_write = dm9601_mdio_write;
 | |
| 	dev->mii.phy_id_mask = 0x1f;
 | |
| 	dev->mii.reg_num_mask = 0x1f;
 | |
| 
 | |
| 	/* reset */
 | |
| 	dm_write_reg(dev, DM_NET_CTRL, 1);
 | |
| 	udelay(20);
 | |
| 
 | |
| 	/* read MAC */
 | |
| 	if (dm_read(dev, DM_PHY_ADDR, ETH_ALEN, mac) < 0) {
 | |
| 		printk(KERN_ERR "Error reading MAC address\n");
 | |
| 		ret = -ENODEV;
 | |
| 		goto out;
 | |
| 	}
 | |
| 
 | |
| 	/*
 | |
| 	 * Overwrite the auto-generated address only with good ones.
 | |
| 	 */
 | |
| 	if (is_valid_ether_addr(mac))
 | |
| 		memcpy(dev->net->dev_addr, mac, ETH_ALEN);
 | |
| 	else {
 | |
| 		printk(KERN_WARNING
 | |
| 			"dm9601: No valid MAC address in EEPROM, using %pM\n",
 | |
| 			dev->net->dev_addr);
 | |
| 		__dm9601_set_mac_address(dev);
 | |
| 	}
 | |
| 
 | |
| 	/* power up phy */
 | |
| 	dm_write_reg(dev, DM_GPR_CTRL, 1);
 | |
| 	dm_write_reg(dev, DM_GPR_DATA, 0);
 | |
| 
 | |
| 	/* receive broadcast packets */
 | |
| 	dm9601_set_multicast(dev->net);
 | |
| 
 | |
| 	dm9601_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR, BMCR_RESET);
 | |
| 	dm9601_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE,
 | |
| 			  ADVERTISE_ALL | ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP);
 | |
| 	mii_nway_restart(&dev->mii);
 | |
| 
 | |
| out:
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| static int dm9601_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
 | |
| {
 | |
| 	u8 status;
 | |
| 	int len;
 | |
| 
 | |
| 	/* format:
 | |
| 	   b1: rx status
 | |
| 	   b2: packet length (incl crc) low
 | |
| 	   b3: packet length (incl crc) high
 | |
| 	   b4..n-4: packet data
 | |
| 	   bn-3..bn: ethernet crc
 | |
| 	 */
 | |
| 
 | |
| 	if (unlikely(skb->len < DM_RX_OVERHEAD)) {
 | |
| 		dev_err(&dev->udev->dev, "unexpected tiny rx frame\n");
 | |
| 		return 0;
 | |
| 	}
 | |
| 
 | |
| 	status = skb->data[0];
 | |
| 	len = (skb->data[1] | (skb->data[2] << 8)) - 4;
 | |
| 
 | |
| 	if (unlikely(status & 0xbf)) {
 | |
| 		if (status & 0x01) dev->net->stats.rx_fifo_errors++;
 | |
| 		if (status & 0x02) dev->net->stats.rx_crc_errors++;
 | |
| 		if (status & 0x04) dev->net->stats.rx_frame_errors++;
 | |
| 		if (status & 0x20) dev->net->stats.rx_missed_errors++;
 | |
| 		if (status & 0x90) dev->net->stats.rx_length_errors++;
 | |
| 		return 0;
 | |
| 	}
 | |
| 
 | |
| 	skb_pull(skb, 3);
 | |
| 	skb_trim(skb, len);
 | |
| 
 | |
| 	return 1;
 | |
| }
 | |
| 
 | |
| static struct sk_buff *dm9601_tx_fixup(struct usbnet *dev, struct sk_buff *skb,
 | |
| 				       gfp_t flags)
 | |
| {
 | |
| 	int len;
 | |
| 
 | |
| 	/* format:
 | |
| 	   b1: packet length low
 | |
| 	   b2: packet length high
 | |
| 	   b3..n: packet data
 | |
| 	*/
 | |
| 
 | |
| 	len = skb->len;
 | |
| 
 | |
| 	if (skb_headroom(skb) < DM_TX_OVERHEAD) {
 | |
| 		struct sk_buff *skb2;
 | |
| 
 | |
| 		skb2 = skb_copy_expand(skb, DM_TX_OVERHEAD, 0, flags);
 | |
| 		dev_kfree_skb_any(skb);
 | |
| 		skb = skb2;
 | |
| 		if (!skb)
 | |
| 			return NULL;
 | |
| 	}
 | |
| 
 | |
| 	__skb_push(skb, DM_TX_OVERHEAD);
 | |
| 
 | |
| 	/* usbnet adds padding if length is a multiple of packet size
 | |
| 	   if so, adjust length value in header */
 | |
| 	if ((skb->len % dev->maxpacket) == 0)
 | |
| 		len++;
 | |
| 
 | |
| 	skb->data[0] = len;
 | |
| 	skb->data[1] = len >> 8;
 | |
| 
 | |
| 	return skb;
 | |
| }
 | |
| 
 | |
| static void dm9601_status(struct usbnet *dev, struct urb *urb)
 | |
| {
 | |
| 	int link;
 | |
| 	u8 *buf;
 | |
| 
 | |
| 	/* format:
 | |
| 	   b0: net status
 | |
| 	   b1: tx status 1
 | |
| 	   b2: tx status 2
 | |
| 	   b3: rx status
 | |
| 	   b4: rx overflow
 | |
| 	   b5: rx count
 | |
| 	   b6: tx count
 | |
| 	   b7: gpr
 | |
| 	*/
 | |
| 
 | |
| 	if (urb->actual_length < 8)
 | |
| 		return;
 | |
| 
 | |
| 	buf = urb->transfer_buffer;
 | |
| 
 | |
| 	link = !!(buf[0] & 0x40);
 | |
| 	if (netif_carrier_ok(dev->net) != link) {
 | |
| 		if (link) {
 | |
| 			netif_carrier_on(dev->net);
 | |
| 			usbnet_defer_kevent (dev, EVENT_LINK_RESET);
 | |
| 		}
 | |
| 		else
 | |
| 			netif_carrier_off(dev->net);
 | |
| 		netdev_dbg(dev->net, "Link Status is: %d\n", link);
 | |
| 	}
 | |
| }
 | |
| 
 | |
| static int dm9601_link_reset(struct usbnet *dev)
 | |
| {
 | |
| 	struct ethtool_cmd ecmd;
 | |
| 
 | |
| 	mii_check_media(&dev->mii, 1, 1);
 | |
| 	mii_ethtool_gset(&dev->mii, &ecmd);
 | |
| 
 | |
| 	netdev_dbg(dev->net, "link_reset() speed: %d duplex: %d\n",
 | |
| 		   ecmd.speed, ecmd.duplex);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static const struct driver_info dm9601_info = {
 | |
| 	.description	= "Davicom DM9601 USB Ethernet",
 | |
| 	.flags		= FLAG_ETHER | FLAG_LINK_INTR,
 | |
| 	.bind		= dm9601_bind,
 | |
| 	.rx_fixup	= dm9601_rx_fixup,
 | |
| 	.tx_fixup	= dm9601_tx_fixup,
 | |
| 	.status		= dm9601_status,
 | |
| 	.link_reset	= dm9601_link_reset,
 | |
| 	.reset		= dm9601_link_reset,
 | |
| };
 | |
| 
 | |
| static const struct usb_device_id products[] = {
 | |
| 	{
 | |
| 	 USB_DEVICE(0x07aa, 0x9601),	/* Corega FEther USB-TXC */
 | |
| 	 .driver_info = (unsigned long)&dm9601_info,
 | |
| 	 },
 | |
| 	{
 | |
| 	 USB_DEVICE(0x0a46, 0x9601),	/* Davicom USB-100 */
 | |
| 	 .driver_info = (unsigned long)&dm9601_info,
 | |
| 	 },
 | |
| 	{
 | |
| 	 USB_DEVICE(0x0a46, 0x6688),	/* ZT6688 USB NIC */
 | |
| 	 .driver_info = (unsigned long)&dm9601_info,
 | |
| 	 },
 | |
| 	{
 | |
| 	 USB_DEVICE(0x0a46, 0x0268),	/* ShanTou ST268 USB NIC */
 | |
| 	 .driver_info = (unsigned long)&dm9601_info,
 | |
| 	 },
 | |
| 	{
 | |
| 	 USB_DEVICE(0x0a46, 0x8515),	/* ADMtek ADM8515 USB NIC */
 | |
| 	 .driver_info = (unsigned long)&dm9601_info,
 | |
| 	 },
 | |
| 	{
 | |
| 	USB_DEVICE(0x0a47, 0x9601),	/* Hirose USB-100 */
 | |
| 	.driver_info = (unsigned long)&dm9601_info,
 | |
| 	 },
 | |
| 	{
 | |
| 	USB_DEVICE(0x0fe6, 0x8101),	/* DM9601 USB to Fast Ethernet Adapter */
 | |
| 	.driver_info = (unsigned long)&dm9601_info,
 | |
| 	 },
 | |
| 	{
 | |
| 	 USB_DEVICE(0x0fe6, 0x9700),	/* DM9601 USB to Fast Ethernet Adapter */
 | |
| 	 .driver_info = (unsigned long)&dm9601_info,
 | |
| 	 },
 | |
| 	{
 | |
| 	 USB_DEVICE(0x0a46, 0x9000),	/* DM9000E */
 | |
| 	 .driver_info = (unsigned long)&dm9601_info,
 | |
| 	 },
 | |
| 	{},			// END
 | |
| };
 | |
| 
 | |
| MODULE_DEVICE_TABLE(usb, products);
 | |
| 
 | |
| static struct usb_driver dm9601_driver = {
 | |
| 	.name = "dm9601",
 | |
| 	.id_table = products,
 | |
| 	.probe = usbnet_probe,
 | |
| 	.disconnect = usbnet_disconnect,
 | |
| 	.suspend = usbnet_suspend,
 | |
| 	.resume = usbnet_resume,
 | |
| };
 | |
| 
 | |
| static int __init dm9601_init(void)
 | |
| {
 | |
| 	return usb_register(&dm9601_driver);
 | |
| }
 | |
| 
 | |
| static void __exit dm9601_exit(void)
 | |
| {
 | |
| 	usb_deregister(&dm9601_driver);
 | |
| }
 | |
| 
 | |
| module_init(dm9601_init);
 | |
| module_exit(dm9601_exit);
 | |
| 
 | |
| MODULE_AUTHOR("Peter Korsgaard <jacmet@sunsite.dk>");
 | |
| MODULE_DESCRIPTION("Davicom DM9601 USB 1.1 ethernet devices");
 | |
| MODULE_LICENSE("GPL");
 |