A hwmon driver for the National Semiconductor LM95245 dual temperature sensors chip. Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
		
			
				
	
	
		
			543 lines
		
	
	
	
		
			14 KiB
			
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			543 lines
		
	
	
	
		
			14 KiB
			
		
	
	
	
		
			C
		
	
	
	
	
	
/*
 | 
						|
 * Copyright (C) 2011 Alexander Stein <alexander.stein@systec-electronic.com>
 | 
						|
 *
 | 
						|
 * The LM95245 is a sensor chip made by National Semiconductors.
 | 
						|
 * It reports up to two temperatures (its own plus an external one).
 | 
						|
 * Complete datasheet can be obtained from National's website at:
 | 
						|
 *   http://www.national.com/ds.cgi/LM/LM95245.pdf
 | 
						|
 *
 | 
						|
 * This driver is based on lm95241.c
 | 
						|
 *
 | 
						|
 * This program is free software; you can redistribute it and/or modify
 | 
						|
 * it under the terms of the GNU General Public License as published by
 | 
						|
 * the Free Software Foundation; either version 2 of the License, or
 | 
						|
 * (at your option) any later version.
 | 
						|
 *
 | 
						|
 * This program is distributed in the hope that it will be useful,
 | 
						|
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 | 
						|
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 | 
						|
 * GNU General Public License for more details.
 | 
						|
 *
 | 
						|
 * You should have received a copy of the GNU General Public License
 | 
						|
 * along with this program; if not, write to the Free Software
 | 
						|
 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 | 
						|
 */
 | 
						|
 | 
						|
#include <linux/module.h>
 | 
						|
#include <linux/init.h>
 | 
						|
#include <linux/slab.h>
 | 
						|
#include <linux/jiffies.h>
 | 
						|
#include <linux/i2c.h>
 | 
						|
#include <linux/hwmon.h>
 | 
						|
#include <linux/hwmon-sysfs.h>
 | 
						|
#include <linux/err.h>
 | 
						|
#include <linux/mutex.h>
 | 
						|
#include <linux/sysfs.h>
 | 
						|
 | 
						|
#define DEVNAME "lm95245"
 | 
						|
 | 
						|
static const unsigned short normal_i2c[] = {
 | 
						|
	0x18, 0x19, 0x29, 0x4c, 0x4d, I2C_CLIENT_END };
 | 
						|
 | 
						|
/* LM95245 registers */
 | 
						|
/* general registers */
 | 
						|
#define LM95245_REG_RW_CONFIG1		0x03
 | 
						|
#define LM95245_REG_RW_CONVERS_RATE	0x04
 | 
						|
#define LM95245_REG_W_ONE_SHOT		0x0F
 | 
						|
 | 
						|
/* diode configuration */
 | 
						|
#define LM95245_REG_RW_CONFIG2		0xBF
 | 
						|
#define LM95245_REG_RW_REMOTE_OFFH	0x11
 | 
						|
#define LM95245_REG_RW_REMOTE_OFFL	0x12
 | 
						|
 | 
						|
/* status registers */
 | 
						|
#define LM95245_REG_R_STATUS1		0x02
 | 
						|
#define LM95245_REG_R_STATUS2		0x33
 | 
						|
 | 
						|
/* limit registers */
 | 
						|
#define LM95245_REG_RW_REMOTE_OS_LIMIT		0x07
 | 
						|
#define LM95245_REG_RW_LOCAL_OS_TCRIT_LIMIT	0x20
 | 
						|
#define LM95245_REG_RW_REMOTE_TCRIT_LIMIT	0x19
 | 
						|
#define LM95245_REG_RW_COMMON_HYSTERESIS	0x21
 | 
						|
 | 
						|
/* temperature signed */
 | 
						|
#define LM95245_REG_R_LOCAL_TEMPH_S	0x00
 | 
						|
#define LM95245_REG_R_LOCAL_TEMPL_S	0x30
 | 
						|
#define LM95245_REG_R_REMOTE_TEMPH_S	0x01
 | 
						|
#define LM95245_REG_R_REMOTE_TEMPL_S	0x10
 | 
						|
/* temperature unsigned */
 | 
						|
#define LM95245_REG_R_REMOTE_TEMPH_U	0x31
 | 
						|
#define LM95245_REG_R_REMOTE_TEMPL_U	0x32
 | 
						|
 | 
						|
/* id registers */
 | 
						|
#define LM95245_REG_R_MAN_ID		0xFE
 | 
						|
#define LM95245_REG_R_CHIP_ID		0xFF
 | 
						|
 | 
						|
/* LM95245 specific bitfields */
 | 
						|
#define CFG_STOP		0x40
 | 
						|
#define CFG_REMOTE_TCRIT_MASK	0x10
 | 
						|
#define CFG_REMOTE_OS_MASK	0x08
 | 
						|
#define CFG_LOCAL_TCRIT_MASK	0x04
 | 
						|
#define CFG_LOCAL_OS_MASK	0x02
 | 
						|
 | 
						|
#define CFG2_OS_A0		0x40
 | 
						|
#define CFG2_DIODE_FAULT_OS	0x20
 | 
						|
#define CFG2_DIODE_FAULT_TCRIT	0x10
 | 
						|
#define CFG2_REMOTE_TT		0x08
 | 
						|
#define CFG2_REMOTE_FILTER_DIS	0x00
 | 
						|
#define CFG2_REMOTE_FILTER_EN	0x06
 | 
						|
 | 
						|
/* conversation rate in ms */
 | 
						|
#define RATE_CR0063	0x00
 | 
						|
#define RATE_CR0364	0x01
 | 
						|
#define RATE_CR1000	0x02
 | 
						|
#define RATE_CR2500	0x03
 | 
						|
 | 
						|
#define STATUS1_DIODE_FAULT	0x04
 | 
						|
#define STATUS1_RTCRIT		0x02
 | 
						|
#define STATUS1_LOC		0x01
 | 
						|
 | 
						|
#define MANUFACTURER_ID		0x01
 | 
						|
#define DEFAULT_REVISION	0xB3
 | 
						|
 | 
						|
static const u8 lm95245_reg_address[] = {
 | 
						|
	LM95245_REG_R_LOCAL_TEMPH_S,
 | 
						|
	LM95245_REG_R_LOCAL_TEMPL_S,
 | 
						|
	LM95245_REG_R_REMOTE_TEMPH_S,
 | 
						|
	LM95245_REG_R_REMOTE_TEMPL_S,
 | 
						|
	LM95245_REG_R_REMOTE_TEMPH_U,
 | 
						|
	LM95245_REG_R_REMOTE_TEMPL_U,
 | 
						|
	LM95245_REG_RW_LOCAL_OS_TCRIT_LIMIT,
 | 
						|
	LM95245_REG_RW_REMOTE_TCRIT_LIMIT,
 | 
						|
	LM95245_REG_RW_COMMON_HYSTERESIS,
 | 
						|
	LM95245_REG_R_STATUS1,
 | 
						|
};
 | 
						|
 | 
						|
/* Client data (each client gets its own) */
 | 
						|
struct lm95245_data {
 | 
						|
	struct device *hwmon_dev;
 | 
						|
	struct mutex update_lock;
 | 
						|
	unsigned long last_updated;	/* in jiffies */
 | 
						|
	unsigned long interval;	/* in msecs */
 | 
						|
	bool valid;		/* zero until following fields are valid */
 | 
						|
	/* registers values */
 | 
						|
	u8 regs[ARRAY_SIZE(lm95245_reg_address)];
 | 
						|
	u8 config1, config2;
 | 
						|
};
 | 
						|
 | 
						|
/* Conversions */
 | 
						|
static int temp_from_reg_unsigned(u8 val_h, u8 val_l)
 | 
						|
{
 | 
						|
	return val_h * 1000 + val_l * 1000 / 256;
 | 
						|
}
 | 
						|
 | 
						|
static int temp_from_reg_signed(u8 val_h, u8 val_l)
 | 
						|
{
 | 
						|
	if (val_h & 0x80)
 | 
						|
		return (val_h - 0x100) * 1000;
 | 
						|
	return temp_from_reg_unsigned(val_h, val_l);
 | 
						|
}
 | 
						|
 | 
						|
static struct lm95245_data *lm95245_update_device(struct device *dev)
 | 
						|
{
 | 
						|
	struct i2c_client *client = to_i2c_client(dev);
 | 
						|
	struct lm95245_data *data = i2c_get_clientdata(client);
 | 
						|
 | 
						|
	mutex_lock(&data->update_lock);
 | 
						|
 | 
						|
	if (time_after(jiffies, data->last_updated
 | 
						|
		+ msecs_to_jiffies(data->interval)) || !data->valid) {
 | 
						|
		int i;
 | 
						|
 | 
						|
		dev_dbg(&client->dev, "Updating lm95245 data.\n");
 | 
						|
		for (i = 0; i < ARRAY_SIZE(lm95245_reg_address); i++)
 | 
						|
			data->regs[i]
 | 
						|
			  = i2c_smbus_read_byte_data(client,
 | 
						|
						     lm95245_reg_address[i]);
 | 
						|
		data->last_updated = jiffies;
 | 
						|
		data->valid = 1;
 | 
						|
	}
 | 
						|
 | 
						|
	mutex_unlock(&data->update_lock);
 | 
						|
 | 
						|
	return data;
 | 
						|
}
 | 
						|
 | 
						|
static unsigned long lm95245_read_conversion_rate(struct i2c_client *client)
 | 
						|
{
 | 
						|
	int rate;
 | 
						|
	unsigned long interval;
 | 
						|
 | 
						|
	rate = i2c_smbus_read_byte_data(client, LM95245_REG_RW_CONVERS_RATE);
 | 
						|
 | 
						|
	switch (rate) {
 | 
						|
	case RATE_CR0063:
 | 
						|
		interval = 63;
 | 
						|
		break;
 | 
						|
	case RATE_CR0364:
 | 
						|
		interval = 364;
 | 
						|
		break;
 | 
						|
	case RATE_CR1000:
 | 
						|
		interval = 1000;
 | 
						|
		break;
 | 
						|
	case RATE_CR2500:
 | 
						|
	default:
 | 
						|
		interval = 2500;
 | 
						|
		break;
 | 
						|
	}
 | 
						|
 | 
						|
	return interval;
 | 
						|
}
 | 
						|
 | 
						|
static unsigned long lm95245_set_conversion_rate(struct i2c_client *client,
 | 
						|
			unsigned long interval)
 | 
						|
{
 | 
						|
	int rate;
 | 
						|
 | 
						|
	if (interval <= 63) {
 | 
						|
		interval = 63;
 | 
						|
		rate = RATE_CR0063;
 | 
						|
	} else if (interval <= 364) {
 | 
						|
		interval = 364;
 | 
						|
		rate = RATE_CR0364;
 | 
						|
	} else if (interval <= 1000) {
 | 
						|
		interval = 1000;
 | 
						|
		rate = RATE_CR1000;
 | 
						|
	} else {
 | 
						|
		interval = 2500;
 | 
						|
		rate = RATE_CR2500;
 | 
						|
	}
 | 
						|
 | 
						|
	i2c_smbus_write_byte_data(client, LM95245_REG_RW_CONVERS_RATE, rate);
 | 
						|
 | 
						|
	return interval;
 | 
						|
}
 | 
						|
 | 
						|
/* Sysfs stuff */
 | 
						|
static ssize_t show_input(struct device *dev, struct device_attribute *attr,
 | 
						|
			  char *buf)
 | 
						|
{
 | 
						|
	struct lm95245_data *data = lm95245_update_device(dev);
 | 
						|
	int temp;
 | 
						|
	int index = to_sensor_dev_attr(attr)->index;
 | 
						|
 | 
						|
	/*
 | 
						|
	 * Index 0 (Local temp) is always signed
 | 
						|
	 * Index 2 (Remote temp) has both signed and unsigned data
 | 
						|
	 * use signed calculation for remote if signed bit is set
 | 
						|
	 */
 | 
						|
	if (index == 0 || data->regs[index] & 0x80)
 | 
						|
		temp = temp_from_reg_signed(data->regs[index],
 | 
						|
			    data->regs[index + 1]);
 | 
						|
	else
 | 
						|
		temp = temp_from_reg_unsigned(data->regs[index + 2],
 | 
						|
			    data->regs[index + 3]);
 | 
						|
 | 
						|
	return snprintf(buf, PAGE_SIZE - 1, "%d\n", temp);
 | 
						|
}
 | 
						|
 | 
						|
static ssize_t show_limit(struct device *dev, struct device_attribute *attr,
 | 
						|
			 char *buf)
 | 
						|
{
 | 
						|
	struct lm95245_data *data = lm95245_update_device(dev);
 | 
						|
	int index = to_sensor_dev_attr(attr)->index;
 | 
						|
 | 
						|
	return snprintf(buf, PAGE_SIZE - 1, "%d\n",
 | 
						|
			data->regs[index] * 1000);
 | 
						|
}
 | 
						|
 | 
						|
static ssize_t set_limit(struct device *dev, struct device_attribute *attr,
 | 
						|
			const char *buf, size_t count)
 | 
						|
{
 | 
						|
	struct i2c_client *client = to_i2c_client(dev);
 | 
						|
	struct lm95245_data *data = i2c_get_clientdata(client);
 | 
						|
	int index = to_sensor_dev_attr(attr)->index;
 | 
						|
	unsigned long val;
 | 
						|
 | 
						|
	if (strict_strtoul(buf, 10, &val) < 0)
 | 
						|
		return -EINVAL;
 | 
						|
 | 
						|
	val /= 1000;
 | 
						|
 | 
						|
	val = SENSORS_LIMIT(val, 0, (index == 6 ? 127 : 255));
 | 
						|
 | 
						|
	mutex_lock(&data->update_lock);
 | 
						|
 | 
						|
	data->valid = 0;
 | 
						|
 | 
						|
	i2c_smbus_write_byte_data(client, lm95245_reg_address[index], val);
 | 
						|
 | 
						|
	mutex_unlock(&data->update_lock);
 | 
						|
 | 
						|
	return count;
 | 
						|
}
 | 
						|
 | 
						|
static ssize_t set_crit_hyst(struct device *dev, struct device_attribute *attr,
 | 
						|
			const char *buf, size_t count)
 | 
						|
{
 | 
						|
	struct i2c_client *client = to_i2c_client(dev);
 | 
						|
	struct lm95245_data *data = i2c_get_clientdata(client);
 | 
						|
	unsigned long val;
 | 
						|
 | 
						|
	if (strict_strtoul(buf, 10, &val) < 0)
 | 
						|
		return -EINVAL;
 | 
						|
 | 
						|
	val /= 1000;
 | 
						|
 | 
						|
	val = SENSORS_LIMIT(val, 0, 31);
 | 
						|
 | 
						|
	mutex_lock(&data->update_lock);
 | 
						|
 | 
						|
	data->valid = 0;
 | 
						|
 | 
						|
	/* shared crit hysteresis */
 | 
						|
	i2c_smbus_write_byte_data(client, LM95245_REG_RW_COMMON_HYSTERESIS,
 | 
						|
		val);
 | 
						|
 | 
						|
	mutex_unlock(&data->update_lock);
 | 
						|
 | 
						|
	return count;
 | 
						|
}
 | 
						|
 | 
						|
static ssize_t show_type(struct device *dev, struct device_attribute *attr,
 | 
						|
			 char *buf)
 | 
						|
{
 | 
						|
	struct i2c_client *client = to_i2c_client(dev);
 | 
						|
	struct lm95245_data *data = i2c_get_clientdata(client);
 | 
						|
 | 
						|
	return snprintf(buf, PAGE_SIZE - 1,
 | 
						|
		data->config2 & CFG2_REMOTE_TT ? "1\n" : "2\n");
 | 
						|
}
 | 
						|
 | 
						|
static ssize_t set_type(struct device *dev, struct device_attribute *attr,
 | 
						|
			const char *buf, size_t count)
 | 
						|
{
 | 
						|
	struct i2c_client *client = to_i2c_client(dev);
 | 
						|
	struct lm95245_data *data = i2c_get_clientdata(client);
 | 
						|
	unsigned long val;
 | 
						|
 | 
						|
	if (strict_strtoul(buf, 10, &val) < 0)
 | 
						|
		return -EINVAL;
 | 
						|
	if (val != 1 && val != 2)
 | 
						|
		return -EINVAL;
 | 
						|
 | 
						|
	mutex_lock(&data->update_lock);
 | 
						|
 | 
						|
	if (val == 1)
 | 
						|
		data->config2 |= CFG2_REMOTE_TT;
 | 
						|
	else
 | 
						|
		data->config2 &= ~CFG2_REMOTE_TT;
 | 
						|
 | 
						|
	data->valid = 0;
 | 
						|
 | 
						|
	i2c_smbus_write_byte_data(client, LM95245_REG_RW_CONFIG2,
 | 
						|
				  data->config2);
 | 
						|
 | 
						|
	mutex_unlock(&data->update_lock);
 | 
						|
 | 
						|
	return count;
 | 
						|
}
 | 
						|
 | 
						|
static ssize_t show_alarm(struct device *dev, struct device_attribute *attr,
 | 
						|
			 char *buf)
 | 
						|
{
 | 
						|
	struct lm95245_data *data = lm95245_update_device(dev);
 | 
						|
	int index = to_sensor_dev_attr(attr)->index;
 | 
						|
 | 
						|
	return snprintf(buf, PAGE_SIZE - 1, "%d\n",
 | 
						|
			!!(data->regs[9] & index));
 | 
						|
}
 | 
						|
 | 
						|
static ssize_t show_interval(struct device *dev, struct device_attribute *attr,
 | 
						|
			     char *buf)
 | 
						|
{
 | 
						|
	struct lm95245_data *data = lm95245_update_device(dev);
 | 
						|
 | 
						|
	return snprintf(buf, PAGE_SIZE - 1, "%lu\n", data->interval);
 | 
						|
}
 | 
						|
 | 
						|
static ssize_t set_interval(struct device *dev, struct device_attribute *attr,
 | 
						|
			    const char *buf, size_t count)
 | 
						|
{
 | 
						|
	struct i2c_client *client = to_i2c_client(dev);
 | 
						|
	struct lm95245_data *data = i2c_get_clientdata(client);
 | 
						|
	unsigned long val;
 | 
						|
 | 
						|
	if (strict_strtoul(buf, 10, &val) < 0)
 | 
						|
		return -EINVAL;
 | 
						|
 | 
						|
	mutex_lock(&data->update_lock);
 | 
						|
 | 
						|
	data->interval = lm95245_set_conversion_rate(client, val);
 | 
						|
 | 
						|
	mutex_unlock(&data->update_lock);
 | 
						|
 | 
						|
	return count;
 | 
						|
}
 | 
						|
 | 
						|
static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_input, NULL, 0);
 | 
						|
static SENSOR_DEVICE_ATTR(temp1_crit, S_IWUSR | S_IRUGO, show_limit,
 | 
						|
		set_limit, 6);
 | 
						|
static SENSOR_DEVICE_ATTR(temp1_crit_hyst, S_IWUSR | S_IRUGO, show_limit,
 | 
						|
		set_crit_hyst, 8);
 | 
						|
static SENSOR_DEVICE_ATTR(temp1_crit_alarm, S_IRUGO, show_alarm, NULL,
 | 
						|
		STATUS1_LOC);
 | 
						|
 | 
						|
static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_input, NULL, 2);
 | 
						|
static SENSOR_DEVICE_ATTR(temp2_crit, S_IWUSR | S_IRUGO, show_limit,
 | 
						|
		set_limit, 7);
 | 
						|
static SENSOR_DEVICE_ATTR(temp2_crit_hyst, S_IWUSR | S_IRUGO, show_limit,
 | 
						|
		set_crit_hyst, 8);
 | 
						|
static SENSOR_DEVICE_ATTR(temp2_crit_alarm, S_IRUGO, show_alarm, NULL,
 | 
						|
		STATUS1_RTCRIT);
 | 
						|
static SENSOR_DEVICE_ATTR(temp2_type, S_IWUSR | S_IRUGO, show_type,
 | 
						|
		set_type, 0);
 | 
						|
static SENSOR_DEVICE_ATTR(temp2_fault, S_IRUGO, show_alarm, NULL,
 | 
						|
		STATUS1_DIODE_FAULT);
 | 
						|
 | 
						|
static DEVICE_ATTR(update_interval, S_IWUSR | S_IRUGO, show_interval,
 | 
						|
		set_interval);
 | 
						|
 | 
						|
static struct attribute *lm95245_attributes[] = {
 | 
						|
	&sensor_dev_attr_temp1_input.dev_attr.attr,
 | 
						|
	&sensor_dev_attr_temp1_crit.dev_attr.attr,
 | 
						|
	&sensor_dev_attr_temp1_crit_hyst.dev_attr.attr,
 | 
						|
	&sensor_dev_attr_temp1_crit_alarm.dev_attr.attr,
 | 
						|
	&sensor_dev_attr_temp2_input.dev_attr.attr,
 | 
						|
	&sensor_dev_attr_temp2_crit.dev_attr.attr,
 | 
						|
	&sensor_dev_attr_temp2_crit_hyst.dev_attr.attr,
 | 
						|
	&sensor_dev_attr_temp2_crit_alarm.dev_attr.attr,
 | 
						|
	&sensor_dev_attr_temp2_type.dev_attr.attr,
 | 
						|
	&sensor_dev_attr_temp2_fault.dev_attr.attr,
 | 
						|
	&dev_attr_update_interval.attr,
 | 
						|
	NULL
 | 
						|
};
 | 
						|
 | 
						|
static const struct attribute_group lm95245_group = {
 | 
						|
	.attrs = lm95245_attributes,
 | 
						|
};
 | 
						|
 | 
						|
/* Return 0 if detection is successful, -ENODEV otherwise */
 | 
						|
static int lm95245_detect(struct i2c_client *new_client,
 | 
						|
			  struct i2c_board_info *info)
 | 
						|
{
 | 
						|
	struct i2c_adapter *adapter = new_client->adapter;
 | 
						|
 | 
						|
	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
 | 
						|
		return -ENODEV;
 | 
						|
 | 
						|
	if (i2c_smbus_read_byte_data(new_client, LM95245_REG_R_MAN_ID)
 | 
						|
			!= MANUFACTURER_ID
 | 
						|
		|| i2c_smbus_read_byte_data(new_client, LM95245_REG_R_CHIP_ID)
 | 
						|
			!= DEFAULT_REVISION)
 | 
						|
		return -ENODEV;
 | 
						|
 | 
						|
	strlcpy(info->type, DEVNAME, I2C_NAME_SIZE);
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static void lm95245_init_client(struct i2c_client *client)
 | 
						|
{
 | 
						|
	struct lm95245_data *data = i2c_get_clientdata(client);
 | 
						|
 | 
						|
	data->valid = 0;
 | 
						|
	data->interval = lm95245_read_conversion_rate(client);
 | 
						|
 | 
						|
	data->config1 = i2c_smbus_read_byte_data(client,
 | 
						|
		LM95245_REG_RW_CONFIG1);
 | 
						|
	data->config2 = i2c_smbus_read_byte_data(client,
 | 
						|
		LM95245_REG_RW_CONFIG2);
 | 
						|
 | 
						|
	if (data->config1 & CFG_STOP) {
 | 
						|
		/* Clear the standby bit */
 | 
						|
		data->config1 &= ~CFG_STOP;
 | 
						|
		i2c_smbus_write_byte_data(client, LM95245_REG_RW_CONFIG1,
 | 
						|
			data->config1);
 | 
						|
	}
 | 
						|
}
 | 
						|
 | 
						|
static int lm95245_probe(struct i2c_client *new_client,
 | 
						|
			 const struct i2c_device_id *id)
 | 
						|
{
 | 
						|
	struct lm95245_data *data;
 | 
						|
	int err;
 | 
						|
 | 
						|
	data = kzalloc(sizeof(struct lm95245_data), GFP_KERNEL);
 | 
						|
	if (!data) {
 | 
						|
		err = -ENOMEM;
 | 
						|
		goto exit;
 | 
						|
	}
 | 
						|
 | 
						|
	i2c_set_clientdata(new_client, data);
 | 
						|
	mutex_init(&data->update_lock);
 | 
						|
 | 
						|
	/* Initialize the LM95245 chip */
 | 
						|
	lm95245_init_client(new_client);
 | 
						|
 | 
						|
	/* Register sysfs hooks */
 | 
						|
	err = sysfs_create_group(&new_client->dev.kobj, &lm95245_group);
 | 
						|
	if (err)
 | 
						|
		goto exit_free;
 | 
						|
 | 
						|
	data->hwmon_dev = hwmon_device_register(&new_client->dev);
 | 
						|
	if (IS_ERR(data->hwmon_dev)) {
 | 
						|
		err = PTR_ERR(data->hwmon_dev);
 | 
						|
		goto exit_remove_files;
 | 
						|
	}
 | 
						|
 | 
						|
	return 0;
 | 
						|
 | 
						|
exit_remove_files:
 | 
						|
	sysfs_remove_group(&new_client->dev.kobj, &lm95245_group);
 | 
						|
exit_free:
 | 
						|
	kfree(data);
 | 
						|
exit:
 | 
						|
	return err;
 | 
						|
}
 | 
						|
 | 
						|
static int lm95245_remove(struct i2c_client *client)
 | 
						|
{
 | 
						|
	struct lm95245_data *data = i2c_get_clientdata(client);
 | 
						|
 | 
						|
	hwmon_device_unregister(data->hwmon_dev);
 | 
						|
	sysfs_remove_group(&client->dev.kobj, &lm95245_group);
 | 
						|
 | 
						|
	kfree(data);
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
/* Driver data (common to all clients) */
 | 
						|
static const struct i2c_device_id lm95245_id[] = {
 | 
						|
	{ DEVNAME, 0 },
 | 
						|
	{ }
 | 
						|
};
 | 
						|
MODULE_DEVICE_TABLE(i2c, lm95245_id);
 | 
						|
 | 
						|
static struct i2c_driver lm95245_driver = {
 | 
						|
	.class		= I2C_CLASS_HWMON,
 | 
						|
	.driver = {
 | 
						|
		.name	= DEVNAME,
 | 
						|
	},
 | 
						|
	.probe		= lm95245_probe,
 | 
						|
	.remove		= lm95245_remove,
 | 
						|
	.id_table	= lm95245_id,
 | 
						|
	.detect		= lm95245_detect,
 | 
						|
	.address_list	= normal_i2c,
 | 
						|
};
 | 
						|
 | 
						|
static int __init sensors_lm95245_init(void)
 | 
						|
{
 | 
						|
	return i2c_add_driver(&lm95245_driver);
 | 
						|
}
 | 
						|
 | 
						|
static void __exit sensors_lm95245_exit(void)
 | 
						|
{
 | 
						|
	i2c_del_driver(&lm95245_driver);
 | 
						|
}
 | 
						|
 | 
						|
MODULE_AUTHOR("Alexander Stein <alexander.stein@systec-electronic.com>");
 | 
						|
MODULE_DESCRIPTION("LM95245 sensor driver");
 | 
						|
MODULE_LICENSE("GPL");
 | 
						|
 | 
						|
module_init(sensors_lm95245_init);
 | 
						|
module_exit(sensors_lm95245_exit);
 |