324 lines
		
	
	
	
		
			8.3 KiB
			
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			324 lines
		
	
	
	
		
			8.3 KiB
			
		
	
	
	
		
			C
		
	
	
	
	
	
/*
 | 
						|
 * (C) 2002 - 2003  Dominik Brodowski <linux@brodo.de>
 | 
						|
 *
 | 
						|
 *  Licensed under the terms of the GNU GPL License version 2.
 | 
						|
 *
 | 
						|
 *  BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous*
 | 
						|
 */
 | 
						|
 | 
						|
#include <linux/kernel.h>
 | 
						|
#include <linux/module.h>
 | 
						|
#include <linux/init.h>
 | 
						|
#include <linux/cpufreq.h>
 | 
						|
#include <linux/timex.h>
 | 
						|
 | 
						|
#include <asm/msr.h>
 | 
						|
#include <asm/processor.h>
 | 
						|
 | 
						|
static struct cpufreq_driver	longrun_driver;
 | 
						|
 | 
						|
/**
 | 
						|
 * longrun_{low,high}_freq is needed for the conversion of cpufreq kHz
 | 
						|
 * values into per cent values. In TMTA microcode, the following is valid:
 | 
						|
 * performance_pctg = (current_freq - low_freq)/(high_freq - low_freq)
 | 
						|
 */
 | 
						|
static unsigned int longrun_low_freq, longrun_high_freq;
 | 
						|
 | 
						|
 | 
						|
/**
 | 
						|
 * longrun_get_policy - get the current LongRun policy
 | 
						|
 * @policy: struct cpufreq_policy where current policy is written into
 | 
						|
 *
 | 
						|
 * Reads the current LongRun policy by access to MSR_TMTA_LONGRUN_FLAGS
 | 
						|
 * and MSR_TMTA_LONGRUN_CTRL
 | 
						|
 */
 | 
						|
static void __cpuinit longrun_get_policy(struct cpufreq_policy *policy)
 | 
						|
{
 | 
						|
	u32 msr_lo, msr_hi;
 | 
						|
 | 
						|
	rdmsr(MSR_TMTA_LONGRUN_FLAGS, msr_lo, msr_hi);
 | 
						|
	pr_debug("longrun flags are %x - %x\n", msr_lo, msr_hi);
 | 
						|
	if (msr_lo & 0x01)
 | 
						|
		policy->policy = CPUFREQ_POLICY_PERFORMANCE;
 | 
						|
	else
 | 
						|
		policy->policy = CPUFREQ_POLICY_POWERSAVE;
 | 
						|
 | 
						|
	rdmsr(MSR_TMTA_LONGRUN_CTRL, msr_lo, msr_hi);
 | 
						|
	pr_debug("longrun ctrl is %x - %x\n", msr_lo, msr_hi);
 | 
						|
	msr_lo &= 0x0000007F;
 | 
						|
	msr_hi &= 0x0000007F;
 | 
						|
 | 
						|
	if (longrun_high_freq <= longrun_low_freq) {
 | 
						|
		/* Assume degenerate Longrun table */
 | 
						|
		policy->min = policy->max = longrun_high_freq;
 | 
						|
	} else {
 | 
						|
		policy->min = longrun_low_freq + msr_lo *
 | 
						|
			((longrun_high_freq - longrun_low_freq) / 100);
 | 
						|
		policy->max = longrun_low_freq + msr_hi *
 | 
						|
			((longrun_high_freq - longrun_low_freq) / 100);
 | 
						|
	}
 | 
						|
	policy->cpu = 0;
 | 
						|
}
 | 
						|
 | 
						|
 | 
						|
/**
 | 
						|
 * longrun_set_policy - sets a new CPUFreq policy
 | 
						|
 * @policy: new policy
 | 
						|
 *
 | 
						|
 * Sets a new CPUFreq policy on LongRun-capable processors. This function
 | 
						|
 * has to be called with cpufreq_driver locked.
 | 
						|
 */
 | 
						|
static int longrun_set_policy(struct cpufreq_policy *policy)
 | 
						|
{
 | 
						|
	u32 msr_lo, msr_hi;
 | 
						|
	u32 pctg_lo, pctg_hi;
 | 
						|
 | 
						|
	if (!policy)
 | 
						|
		return -EINVAL;
 | 
						|
 | 
						|
	if (longrun_high_freq <= longrun_low_freq) {
 | 
						|
		/* Assume degenerate Longrun table */
 | 
						|
		pctg_lo = pctg_hi = 100;
 | 
						|
	} else {
 | 
						|
		pctg_lo = (policy->min - longrun_low_freq) /
 | 
						|
			((longrun_high_freq - longrun_low_freq) / 100);
 | 
						|
		pctg_hi = (policy->max - longrun_low_freq) /
 | 
						|
			((longrun_high_freq - longrun_low_freq) / 100);
 | 
						|
	}
 | 
						|
 | 
						|
	if (pctg_hi > 100)
 | 
						|
		pctg_hi = 100;
 | 
						|
	if (pctg_lo > pctg_hi)
 | 
						|
		pctg_lo = pctg_hi;
 | 
						|
 | 
						|
	/* performance or economy mode */
 | 
						|
	rdmsr(MSR_TMTA_LONGRUN_FLAGS, msr_lo, msr_hi);
 | 
						|
	msr_lo &= 0xFFFFFFFE;
 | 
						|
	switch (policy->policy) {
 | 
						|
	case CPUFREQ_POLICY_PERFORMANCE:
 | 
						|
		msr_lo |= 0x00000001;
 | 
						|
		break;
 | 
						|
	case CPUFREQ_POLICY_POWERSAVE:
 | 
						|
		break;
 | 
						|
	}
 | 
						|
	wrmsr(MSR_TMTA_LONGRUN_FLAGS, msr_lo, msr_hi);
 | 
						|
 | 
						|
	/* lower and upper boundary */
 | 
						|
	rdmsr(MSR_TMTA_LONGRUN_CTRL, msr_lo, msr_hi);
 | 
						|
	msr_lo &= 0xFFFFFF80;
 | 
						|
	msr_hi &= 0xFFFFFF80;
 | 
						|
	msr_lo |= pctg_lo;
 | 
						|
	msr_hi |= pctg_hi;
 | 
						|
	wrmsr(MSR_TMTA_LONGRUN_CTRL, msr_lo, msr_hi);
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
 | 
						|
/**
 | 
						|
 * longrun_verify_poliy - verifies a new CPUFreq policy
 | 
						|
 * @policy: the policy to verify
 | 
						|
 *
 | 
						|
 * Validates a new CPUFreq policy. This function has to be called with
 | 
						|
 * cpufreq_driver locked.
 | 
						|
 */
 | 
						|
static int longrun_verify_policy(struct cpufreq_policy *policy)
 | 
						|
{
 | 
						|
	if (!policy)
 | 
						|
		return -EINVAL;
 | 
						|
 | 
						|
	policy->cpu = 0;
 | 
						|
	cpufreq_verify_within_limits(policy,
 | 
						|
		policy->cpuinfo.min_freq,
 | 
						|
		policy->cpuinfo.max_freq);
 | 
						|
 | 
						|
	if ((policy->policy != CPUFREQ_POLICY_POWERSAVE) &&
 | 
						|
	    (policy->policy != CPUFREQ_POLICY_PERFORMANCE))
 | 
						|
		return -EINVAL;
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static unsigned int longrun_get(unsigned int cpu)
 | 
						|
{
 | 
						|
	u32 eax, ebx, ecx, edx;
 | 
						|
 | 
						|
	if (cpu)
 | 
						|
		return 0;
 | 
						|
 | 
						|
	cpuid(0x80860007, &eax, &ebx, &ecx, &edx);
 | 
						|
	pr_debug("cpuid eax is %u\n", eax);
 | 
						|
 | 
						|
	return eax * 1000;
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 * longrun_determine_freqs - determines the lowest and highest possible core frequency
 | 
						|
 * @low_freq: an int to put the lowest frequency into
 | 
						|
 * @high_freq: an int to put the highest frequency into
 | 
						|
 *
 | 
						|
 * Determines the lowest and highest possible core frequencies on this CPU.
 | 
						|
 * This is necessary to calculate the performance percentage according to
 | 
						|
 * TMTA rules:
 | 
						|
 * performance_pctg = (target_freq - low_freq)/(high_freq - low_freq)
 | 
						|
 */
 | 
						|
static int __cpuinit longrun_determine_freqs(unsigned int *low_freq,
 | 
						|
						      unsigned int *high_freq)
 | 
						|
{
 | 
						|
	u32 msr_lo, msr_hi;
 | 
						|
	u32 save_lo, save_hi;
 | 
						|
	u32 eax, ebx, ecx, edx;
 | 
						|
	u32 try_hi;
 | 
						|
	struct cpuinfo_x86 *c = &cpu_data(0);
 | 
						|
 | 
						|
	if (!low_freq || !high_freq)
 | 
						|
		return -EINVAL;
 | 
						|
 | 
						|
	if (cpu_has(c, X86_FEATURE_LRTI)) {
 | 
						|
		/* if the LongRun Table Interface is present, the
 | 
						|
		 * detection is a bit easier:
 | 
						|
		 * For minimum frequency, read out the maximum
 | 
						|
		 * level (msr_hi), write that into "currently
 | 
						|
		 * selected level", and read out the frequency.
 | 
						|
		 * For maximum frequency, read out level zero.
 | 
						|
		 */
 | 
						|
		/* minimum */
 | 
						|
		rdmsr(MSR_TMTA_LRTI_READOUT, msr_lo, msr_hi);
 | 
						|
		wrmsr(MSR_TMTA_LRTI_READOUT, msr_hi, msr_hi);
 | 
						|
		rdmsr(MSR_TMTA_LRTI_VOLT_MHZ, msr_lo, msr_hi);
 | 
						|
		*low_freq = msr_lo * 1000; /* to kHz */
 | 
						|
 | 
						|
		/* maximum */
 | 
						|
		wrmsr(MSR_TMTA_LRTI_READOUT, 0, msr_hi);
 | 
						|
		rdmsr(MSR_TMTA_LRTI_VOLT_MHZ, msr_lo, msr_hi);
 | 
						|
		*high_freq = msr_lo * 1000; /* to kHz */
 | 
						|
 | 
						|
		pr_debug("longrun table interface told %u - %u kHz\n",
 | 
						|
				*low_freq, *high_freq);
 | 
						|
 | 
						|
		if (*low_freq > *high_freq)
 | 
						|
			*low_freq = *high_freq;
 | 
						|
		return 0;
 | 
						|
	}
 | 
						|
 | 
						|
	/* set the upper border to the value determined during TSC init */
 | 
						|
	*high_freq = (cpu_khz / 1000);
 | 
						|
	*high_freq = *high_freq * 1000;
 | 
						|
	pr_debug("high frequency is %u kHz\n", *high_freq);
 | 
						|
 | 
						|
	/* get current borders */
 | 
						|
	rdmsr(MSR_TMTA_LONGRUN_CTRL, msr_lo, msr_hi);
 | 
						|
	save_lo = msr_lo & 0x0000007F;
 | 
						|
	save_hi = msr_hi & 0x0000007F;
 | 
						|
 | 
						|
	/* if current perf_pctg is larger than 90%, we need to decrease the
 | 
						|
	 * upper limit to make the calculation more accurate.
 | 
						|
	 */
 | 
						|
	cpuid(0x80860007, &eax, &ebx, &ecx, &edx);
 | 
						|
	/* try decreasing in 10% steps, some processors react only
 | 
						|
	 * on some barrier values */
 | 
						|
	for (try_hi = 80; try_hi > 0 && ecx > 90; try_hi -= 10) {
 | 
						|
		/* set to 0 to try_hi perf_pctg */
 | 
						|
		msr_lo &= 0xFFFFFF80;
 | 
						|
		msr_hi &= 0xFFFFFF80;
 | 
						|
		msr_hi |= try_hi;
 | 
						|
		wrmsr(MSR_TMTA_LONGRUN_CTRL, msr_lo, msr_hi);
 | 
						|
 | 
						|
		/* read out current core MHz and current perf_pctg */
 | 
						|
		cpuid(0x80860007, &eax, &ebx, &ecx, &edx);
 | 
						|
 | 
						|
		/* restore values */
 | 
						|
		wrmsr(MSR_TMTA_LONGRUN_CTRL, save_lo, save_hi);
 | 
						|
	}
 | 
						|
	pr_debug("percentage is %u %%, freq is %u MHz\n", ecx, eax);
 | 
						|
 | 
						|
	/* performance_pctg = (current_freq - low_freq)/(high_freq - low_freq)
 | 
						|
	 * eqals
 | 
						|
	 * low_freq * (1 - perf_pctg) = (cur_freq - high_freq * perf_pctg)
 | 
						|
	 *
 | 
						|
	 * high_freq * perf_pctg is stored tempoarily into "ebx".
 | 
						|
	 */
 | 
						|
	ebx = (((cpu_khz / 1000) * ecx) / 100); /* to MHz */
 | 
						|
 | 
						|
	if ((ecx > 95) || (ecx == 0) || (eax < ebx))
 | 
						|
		return -EIO;
 | 
						|
 | 
						|
	edx = ((eax - ebx) * 100) / (100 - ecx);
 | 
						|
	*low_freq = edx * 1000; /* back to kHz */
 | 
						|
 | 
						|
	pr_debug("low frequency is %u kHz\n", *low_freq);
 | 
						|
 | 
						|
	if (*low_freq > *high_freq)
 | 
						|
		*low_freq = *high_freq;
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
 | 
						|
static int __cpuinit longrun_cpu_init(struct cpufreq_policy *policy)
 | 
						|
{
 | 
						|
	int result = 0;
 | 
						|
 | 
						|
	/* capability check */
 | 
						|
	if (policy->cpu != 0)
 | 
						|
		return -ENODEV;
 | 
						|
 | 
						|
	/* detect low and high frequency */
 | 
						|
	result = longrun_determine_freqs(&longrun_low_freq, &longrun_high_freq);
 | 
						|
	if (result)
 | 
						|
		return result;
 | 
						|
 | 
						|
	/* cpuinfo and default policy values */
 | 
						|
	policy->cpuinfo.min_freq = longrun_low_freq;
 | 
						|
	policy->cpuinfo.max_freq = longrun_high_freq;
 | 
						|
	policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
 | 
						|
	longrun_get_policy(policy);
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
 | 
						|
static struct cpufreq_driver longrun_driver = {
 | 
						|
	.flags		= CPUFREQ_CONST_LOOPS,
 | 
						|
	.verify		= longrun_verify_policy,
 | 
						|
	.setpolicy	= longrun_set_policy,
 | 
						|
	.get		= longrun_get,
 | 
						|
	.init		= longrun_cpu_init,
 | 
						|
	.name		= "longrun",
 | 
						|
	.owner		= THIS_MODULE,
 | 
						|
};
 | 
						|
 | 
						|
 | 
						|
/**
 | 
						|
 * longrun_init - initializes the Transmeta Crusoe LongRun CPUFreq driver
 | 
						|
 *
 | 
						|
 * Initializes the LongRun support.
 | 
						|
 */
 | 
						|
static int __init longrun_init(void)
 | 
						|
{
 | 
						|
	struct cpuinfo_x86 *c = &cpu_data(0);
 | 
						|
 | 
						|
	if (c->x86_vendor != X86_VENDOR_TRANSMETA ||
 | 
						|
	    !cpu_has(c, X86_FEATURE_LONGRUN))
 | 
						|
		return -ENODEV;
 | 
						|
 | 
						|
	return cpufreq_register_driver(&longrun_driver);
 | 
						|
}
 | 
						|
 | 
						|
 | 
						|
/**
 | 
						|
 * longrun_exit - unregisters LongRun support
 | 
						|
 */
 | 
						|
static void __exit longrun_exit(void)
 | 
						|
{
 | 
						|
	cpufreq_unregister_driver(&longrun_driver);
 | 
						|
}
 | 
						|
 | 
						|
 | 
						|
MODULE_AUTHOR("Dominik Brodowski <linux@brodo.de>");
 | 
						|
MODULE_DESCRIPTION("LongRun driver for Transmeta Crusoe and "
 | 
						|
		"Efficeon processors.");
 | 
						|
MODULE_LICENSE("GPL");
 | 
						|
 | 
						|
module_init(longrun_init);
 | 
						|
module_exit(longrun_exit);
 |