This fixes a error handling scenario where clocks were not being disabled when QUP_OUTPUT_BLOCK_SIZE returns a size greater than the size of blk_sizes array. So this patch adds a statement to jump to the fail lable to release the clocks. Signed-off-by: Pramod Gurav <pramod.gurav@smartplayin.com> Acked-by: Ivan T. Ivanov <iivanov@mm-sol.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
		
			
				
	
	
		
			772 lines
		
	
	
	
		
			17 KiB
			
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			772 lines
		
	
	
	
		
			17 KiB
			
		
	
	
	
		
			C
		
	
	
	
	
	
/*
 | 
						|
 * Copyright (c) 2009-2013, The Linux Foundation. All rights reserved.
 | 
						|
 * Copyright (c) 2014, Sony Mobile Communications AB.
 | 
						|
 *
 | 
						|
 *
 | 
						|
 * This program is free software; you can redistribute it and/or modify
 | 
						|
 * it under the terms of the GNU General Public License version 2 and
 | 
						|
 * only version 2 as published by the Free Software Foundation.
 | 
						|
 *
 | 
						|
 * This program is distributed in the hope that it will be useful,
 | 
						|
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 | 
						|
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 | 
						|
 * GNU General Public License for more details.
 | 
						|
 *
 | 
						|
 */
 | 
						|
 | 
						|
#include <linux/clk.h>
 | 
						|
#include <linux/delay.h>
 | 
						|
#include <linux/err.h>
 | 
						|
#include <linux/i2c.h>
 | 
						|
#include <linux/interrupt.h>
 | 
						|
#include <linux/io.h>
 | 
						|
#include <linux/module.h>
 | 
						|
#include <linux/of.h>
 | 
						|
#include <linux/platform_device.h>
 | 
						|
#include <linux/pm_runtime.h>
 | 
						|
 | 
						|
/* QUP Registers */
 | 
						|
#define QUP_CONFIG		0x000
 | 
						|
#define QUP_STATE		0x004
 | 
						|
#define QUP_IO_MODE		0x008
 | 
						|
#define QUP_SW_RESET		0x00c
 | 
						|
#define QUP_OPERATIONAL		0x018
 | 
						|
#define QUP_ERROR_FLAGS		0x01c
 | 
						|
#define QUP_ERROR_FLAGS_EN	0x020
 | 
						|
#define QUP_HW_VERSION		0x030
 | 
						|
#define QUP_MX_OUTPUT_CNT	0x100
 | 
						|
#define QUP_OUT_FIFO_BASE	0x110
 | 
						|
#define QUP_MX_WRITE_CNT	0x150
 | 
						|
#define QUP_MX_INPUT_CNT	0x200
 | 
						|
#define QUP_MX_READ_CNT		0x208
 | 
						|
#define QUP_IN_FIFO_BASE	0x218
 | 
						|
#define QUP_I2C_CLK_CTL		0x400
 | 
						|
#define QUP_I2C_STATUS		0x404
 | 
						|
 | 
						|
/* QUP States and reset values */
 | 
						|
#define QUP_RESET_STATE		0
 | 
						|
#define QUP_RUN_STATE		1
 | 
						|
#define QUP_PAUSE_STATE		3
 | 
						|
#define QUP_STATE_MASK		3
 | 
						|
 | 
						|
#define QUP_STATE_VALID		BIT(2)
 | 
						|
#define QUP_I2C_MAST_GEN	BIT(4)
 | 
						|
 | 
						|
#define QUP_OPERATIONAL_RESET	0x000ff0
 | 
						|
#define QUP_I2C_STATUS_RESET	0xfffffc
 | 
						|
 | 
						|
/* QUP OPERATIONAL FLAGS */
 | 
						|
#define QUP_I2C_NACK_FLAG	BIT(3)
 | 
						|
#define QUP_OUT_NOT_EMPTY	BIT(4)
 | 
						|
#define QUP_IN_NOT_EMPTY	BIT(5)
 | 
						|
#define QUP_OUT_FULL		BIT(6)
 | 
						|
#define QUP_OUT_SVC_FLAG	BIT(8)
 | 
						|
#define QUP_IN_SVC_FLAG		BIT(9)
 | 
						|
#define QUP_MX_OUTPUT_DONE	BIT(10)
 | 
						|
#define QUP_MX_INPUT_DONE	BIT(11)
 | 
						|
 | 
						|
/* I2C mini core related values */
 | 
						|
#define QUP_CLOCK_AUTO_GATE	BIT(13)
 | 
						|
#define I2C_MINI_CORE		(2 << 8)
 | 
						|
#define I2C_N_VAL		15
 | 
						|
/* Most significant word offset in FIFO port */
 | 
						|
#define QUP_MSW_SHIFT		(I2C_N_VAL + 1)
 | 
						|
 | 
						|
/* Packing/Unpacking words in FIFOs, and IO modes */
 | 
						|
#define QUP_OUTPUT_BLK_MODE	(1 << 10)
 | 
						|
#define QUP_INPUT_BLK_MODE	(1 << 12)
 | 
						|
#define QUP_UNPACK_EN		BIT(14)
 | 
						|
#define QUP_PACK_EN		BIT(15)
 | 
						|
 | 
						|
#define QUP_REPACK_EN		(QUP_UNPACK_EN | QUP_PACK_EN)
 | 
						|
 | 
						|
#define QUP_OUTPUT_BLOCK_SIZE(x)(((x) >> 0) & 0x03)
 | 
						|
#define QUP_OUTPUT_FIFO_SIZE(x)	(((x) >> 2) & 0x07)
 | 
						|
#define QUP_INPUT_BLOCK_SIZE(x)	(((x) >> 5) & 0x03)
 | 
						|
#define QUP_INPUT_FIFO_SIZE(x)	(((x) >> 7) & 0x07)
 | 
						|
 | 
						|
/* QUP tags */
 | 
						|
#define QUP_TAG_START		(1 << 8)
 | 
						|
#define QUP_TAG_DATA		(2 << 8)
 | 
						|
#define QUP_TAG_STOP		(3 << 8)
 | 
						|
#define QUP_TAG_REC		(4 << 8)
 | 
						|
 | 
						|
/* Status, Error flags */
 | 
						|
#define I2C_STATUS_WR_BUFFER_FULL	BIT(0)
 | 
						|
#define I2C_STATUS_BUS_ACTIVE		BIT(8)
 | 
						|
#define I2C_STATUS_ERROR_MASK		0x38000fc
 | 
						|
#define QUP_STATUS_ERROR_FLAGS		0x7c
 | 
						|
 | 
						|
#define QUP_READ_LIMIT			256
 | 
						|
 | 
						|
struct qup_i2c_dev {
 | 
						|
	struct device		*dev;
 | 
						|
	void __iomem		*base;
 | 
						|
	int			irq;
 | 
						|
	struct clk		*clk;
 | 
						|
	struct clk		*pclk;
 | 
						|
	struct i2c_adapter	adap;
 | 
						|
 | 
						|
	int			clk_ctl;
 | 
						|
	int			out_fifo_sz;
 | 
						|
	int			in_fifo_sz;
 | 
						|
	int			out_blk_sz;
 | 
						|
	int			in_blk_sz;
 | 
						|
 | 
						|
	unsigned long		one_byte_t;
 | 
						|
 | 
						|
	struct i2c_msg		*msg;
 | 
						|
	/* Current posion in user message buffer */
 | 
						|
	int			pos;
 | 
						|
	/* I2C protocol errors */
 | 
						|
	u32			bus_err;
 | 
						|
	/* QUP core errors */
 | 
						|
	u32			qup_err;
 | 
						|
 | 
						|
	struct completion	xfer;
 | 
						|
};
 | 
						|
 | 
						|
static irqreturn_t qup_i2c_interrupt(int irq, void *dev)
 | 
						|
{
 | 
						|
	struct qup_i2c_dev *qup = dev;
 | 
						|
	u32 bus_err;
 | 
						|
	u32 qup_err;
 | 
						|
	u32 opflags;
 | 
						|
 | 
						|
	bus_err = readl(qup->base + QUP_I2C_STATUS);
 | 
						|
	qup_err = readl(qup->base + QUP_ERROR_FLAGS);
 | 
						|
	opflags = readl(qup->base + QUP_OPERATIONAL);
 | 
						|
 | 
						|
	if (!qup->msg) {
 | 
						|
		/* Clear Error interrupt */
 | 
						|
		writel(QUP_RESET_STATE, qup->base + QUP_STATE);
 | 
						|
		return IRQ_HANDLED;
 | 
						|
	}
 | 
						|
 | 
						|
	bus_err &= I2C_STATUS_ERROR_MASK;
 | 
						|
	qup_err &= QUP_STATUS_ERROR_FLAGS;
 | 
						|
 | 
						|
	if (qup_err) {
 | 
						|
		/* Clear Error interrupt */
 | 
						|
		writel(qup_err, qup->base + QUP_ERROR_FLAGS);
 | 
						|
		goto done;
 | 
						|
	}
 | 
						|
 | 
						|
	if (bus_err) {
 | 
						|
		/* Clear Error interrupt */
 | 
						|
		writel(QUP_RESET_STATE, qup->base + QUP_STATE);
 | 
						|
		goto done;
 | 
						|
	}
 | 
						|
 | 
						|
	if (opflags & QUP_IN_SVC_FLAG)
 | 
						|
		writel(QUP_IN_SVC_FLAG, qup->base + QUP_OPERATIONAL);
 | 
						|
 | 
						|
	if (opflags & QUP_OUT_SVC_FLAG)
 | 
						|
		writel(QUP_OUT_SVC_FLAG, qup->base + QUP_OPERATIONAL);
 | 
						|
 | 
						|
done:
 | 
						|
	qup->qup_err = qup_err;
 | 
						|
	qup->bus_err = bus_err;
 | 
						|
	complete(&qup->xfer);
 | 
						|
	return IRQ_HANDLED;
 | 
						|
}
 | 
						|
 | 
						|
static int qup_i2c_poll_state_mask(struct qup_i2c_dev *qup,
 | 
						|
				   u32 req_state, u32 req_mask)
 | 
						|
{
 | 
						|
	int retries = 1;
 | 
						|
	u32 state;
 | 
						|
 | 
						|
	/*
 | 
						|
	 * State transition takes 3 AHB clocks cycles + 3 I2C master clock
 | 
						|
	 * cycles. So retry once after a 1uS delay.
 | 
						|
	 */
 | 
						|
	do {
 | 
						|
		state = readl(qup->base + QUP_STATE);
 | 
						|
 | 
						|
		if (state & QUP_STATE_VALID &&
 | 
						|
		    (state & req_mask) == req_state)
 | 
						|
			return 0;
 | 
						|
 | 
						|
		udelay(1);
 | 
						|
	} while (retries--);
 | 
						|
 | 
						|
	return -ETIMEDOUT;
 | 
						|
}
 | 
						|
 | 
						|
static int qup_i2c_poll_state(struct qup_i2c_dev *qup, u32 req_state)
 | 
						|
{
 | 
						|
	return qup_i2c_poll_state_mask(qup, req_state, QUP_STATE_MASK);
 | 
						|
}
 | 
						|
 | 
						|
static int qup_i2c_poll_state_valid(struct qup_i2c_dev *qup)
 | 
						|
{
 | 
						|
	return qup_i2c_poll_state_mask(qup, 0, 0);
 | 
						|
}
 | 
						|
 | 
						|
static int qup_i2c_poll_state_i2c_master(struct qup_i2c_dev *qup)
 | 
						|
{
 | 
						|
	return qup_i2c_poll_state_mask(qup, QUP_I2C_MAST_GEN, QUP_I2C_MAST_GEN);
 | 
						|
}
 | 
						|
 | 
						|
static int qup_i2c_change_state(struct qup_i2c_dev *qup, u32 state)
 | 
						|
{
 | 
						|
	if (qup_i2c_poll_state_valid(qup) != 0)
 | 
						|
		return -EIO;
 | 
						|
 | 
						|
	writel(state, qup->base + QUP_STATE);
 | 
						|
 | 
						|
	if (qup_i2c_poll_state(qup, state) != 0)
 | 
						|
		return -EIO;
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int qup_i2c_wait_writeready(struct qup_i2c_dev *qup)
 | 
						|
{
 | 
						|
	unsigned long timeout;
 | 
						|
	u32 opflags;
 | 
						|
	u32 status;
 | 
						|
 | 
						|
	timeout = jiffies + HZ;
 | 
						|
 | 
						|
	for (;;) {
 | 
						|
		opflags = readl(qup->base + QUP_OPERATIONAL);
 | 
						|
		status = readl(qup->base + QUP_I2C_STATUS);
 | 
						|
 | 
						|
		if (!(opflags & QUP_OUT_NOT_EMPTY) &&
 | 
						|
		    !(status & I2C_STATUS_BUS_ACTIVE))
 | 
						|
			return 0;
 | 
						|
 | 
						|
		if (time_after(jiffies, timeout))
 | 
						|
			return -ETIMEDOUT;
 | 
						|
 | 
						|
		usleep_range(qup->one_byte_t, qup->one_byte_t * 2);
 | 
						|
	}
 | 
						|
}
 | 
						|
 | 
						|
static void qup_i2c_set_write_mode(struct qup_i2c_dev *qup, struct i2c_msg *msg)
 | 
						|
{
 | 
						|
	/* Number of entries to shift out, including the start */
 | 
						|
	int total = msg->len + 1;
 | 
						|
 | 
						|
	if (total < qup->out_fifo_sz) {
 | 
						|
		/* FIFO mode */
 | 
						|
		writel(QUP_REPACK_EN, qup->base + QUP_IO_MODE);
 | 
						|
		writel(total, qup->base + QUP_MX_WRITE_CNT);
 | 
						|
	} else {
 | 
						|
		/* BLOCK mode (transfer data on chunks) */
 | 
						|
		writel(QUP_OUTPUT_BLK_MODE | QUP_REPACK_EN,
 | 
						|
		       qup->base + QUP_IO_MODE);
 | 
						|
		writel(total, qup->base + QUP_MX_OUTPUT_CNT);
 | 
						|
	}
 | 
						|
}
 | 
						|
 | 
						|
static void qup_i2c_issue_write(struct qup_i2c_dev *qup, struct i2c_msg *msg)
 | 
						|
{
 | 
						|
	u32 addr = msg->addr << 1;
 | 
						|
	u32 qup_tag;
 | 
						|
	u32 opflags;
 | 
						|
	int idx;
 | 
						|
	u32 val;
 | 
						|
 | 
						|
	if (qup->pos == 0) {
 | 
						|
		val = QUP_TAG_START | addr;
 | 
						|
		idx = 1;
 | 
						|
	} else {
 | 
						|
		val = 0;
 | 
						|
		idx = 0;
 | 
						|
	}
 | 
						|
 | 
						|
	while (qup->pos < msg->len) {
 | 
						|
		/* Check that there's space in the FIFO for our pair */
 | 
						|
		opflags = readl(qup->base + QUP_OPERATIONAL);
 | 
						|
		if (opflags & QUP_OUT_FULL)
 | 
						|
			break;
 | 
						|
 | 
						|
		if (qup->pos == msg->len - 1)
 | 
						|
			qup_tag = QUP_TAG_STOP;
 | 
						|
		else
 | 
						|
			qup_tag = QUP_TAG_DATA;
 | 
						|
 | 
						|
		if (idx & 1)
 | 
						|
			val |= (qup_tag | msg->buf[qup->pos]) << QUP_MSW_SHIFT;
 | 
						|
		else
 | 
						|
			val = qup_tag | msg->buf[qup->pos];
 | 
						|
 | 
						|
		/* Write out the pair and the last odd value */
 | 
						|
		if (idx & 1 || qup->pos == msg->len - 1)
 | 
						|
			writel(val, qup->base + QUP_OUT_FIFO_BASE);
 | 
						|
 | 
						|
		qup->pos++;
 | 
						|
		idx++;
 | 
						|
	}
 | 
						|
}
 | 
						|
 | 
						|
static int qup_i2c_write_one(struct qup_i2c_dev *qup, struct i2c_msg *msg)
 | 
						|
{
 | 
						|
	unsigned long left;
 | 
						|
	int ret;
 | 
						|
 | 
						|
	qup->msg = msg;
 | 
						|
	qup->pos = 0;
 | 
						|
 | 
						|
	enable_irq(qup->irq);
 | 
						|
 | 
						|
	qup_i2c_set_write_mode(qup, msg);
 | 
						|
 | 
						|
	ret = qup_i2c_change_state(qup, QUP_RUN_STATE);
 | 
						|
	if (ret)
 | 
						|
		goto err;
 | 
						|
 | 
						|
	writel(qup->clk_ctl, qup->base + QUP_I2C_CLK_CTL);
 | 
						|
 | 
						|
	do {
 | 
						|
		ret = qup_i2c_change_state(qup, QUP_PAUSE_STATE);
 | 
						|
		if (ret)
 | 
						|
			goto err;
 | 
						|
 | 
						|
		qup_i2c_issue_write(qup, msg);
 | 
						|
 | 
						|
		ret = qup_i2c_change_state(qup, QUP_RUN_STATE);
 | 
						|
		if (ret)
 | 
						|
			goto err;
 | 
						|
 | 
						|
		left = wait_for_completion_timeout(&qup->xfer, HZ);
 | 
						|
		if (!left) {
 | 
						|
			writel(1, qup->base + QUP_SW_RESET);
 | 
						|
			ret = -ETIMEDOUT;
 | 
						|
			goto err;
 | 
						|
		}
 | 
						|
 | 
						|
		if (qup->bus_err || qup->qup_err) {
 | 
						|
			if (qup->bus_err & QUP_I2C_NACK_FLAG)
 | 
						|
				dev_err(qup->dev, "NACK from %x\n", msg->addr);
 | 
						|
			ret = -EIO;
 | 
						|
			goto err;
 | 
						|
		}
 | 
						|
	} while (qup->pos < msg->len);
 | 
						|
 | 
						|
	/* Wait for the outstanding data in the fifo to drain */
 | 
						|
	ret = qup_i2c_wait_writeready(qup);
 | 
						|
 | 
						|
err:
 | 
						|
	disable_irq(qup->irq);
 | 
						|
	qup->msg = NULL;
 | 
						|
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
 | 
						|
static void qup_i2c_set_read_mode(struct qup_i2c_dev *qup, int len)
 | 
						|
{
 | 
						|
	if (len < qup->in_fifo_sz) {
 | 
						|
		/* FIFO mode */
 | 
						|
		writel(QUP_REPACK_EN, qup->base + QUP_IO_MODE);
 | 
						|
		writel(len, qup->base + QUP_MX_READ_CNT);
 | 
						|
	} else {
 | 
						|
		/* BLOCK mode (transfer data on chunks) */
 | 
						|
		writel(QUP_INPUT_BLK_MODE | QUP_REPACK_EN,
 | 
						|
		       qup->base + QUP_IO_MODE);
 | 
						|
		writel(len, qup->base + QUP_MX_INPUT_CNT);
 | 
						|
	}
 | 
						|
}
 | 
						|
 | 
						|
static void qup_i2c_issue_read(struct qup_i2c_dev *qup, struct i2c_msg *msg)
 | 
						|
{
 | 
						|
	u32 addr, len, val;
 | 
						|
 | 
						|
	addr = (msg->addr << 1) | 1;
 | 
						|
 | 
						|
	/* 0 is used to specify a length 256 (QUP_READ_LIMIT) */
 | 
						|
	len = (msg->len == QUP_READ_LIMIT) ? 0 : msg->len;
 | 
						|
 | 
						|
	val = ((QUP_TAG_REC | len) << QUP_MSW_SHIFT) | QUP_TAG_START | addr;
 | 
						|
	writel(val, qup->base + QUP_OUT_FIFO_BASE);
 | 
						|
}
 | 
						|
 | 
						|
 | 
						|
static void qup_i2c_read_fifo(struct qup_i2c_dev *qup, struct i2c_msg *msg)
 | 
						|
{
 | 
						|
	u32 opflags;
 | 
						|
	u32 val = 0;
 | 
						|
	int idx;
 | 
						|
 | 
						|
	for (idx = 0; qup->pos < msg->len; idx++) {
 | 
						|
		if ((idx & 1) == 0) {
 | 
						|
			/* Check that FIFO have data */
 | 
						|
			opflags = readl(qup->base + QUP_OPERATIONAL);
 | 
						|
			if (!(opflags & QUP_IN_NOT_EMPTY))
 | 
						|
				break;
 | 
						|
 | 
						|
			/* Reading 2 words at time */
 | 
						|
			val = readl(qup->base + QUP_IN_FIFO_BASE);
 | 
						|
 | 
						|
			msg->buf[qup->pos++] = val & 0xFF;
 | 
						|
		} else {
 | 
						|
			msg->buf[qup->pos++] = val >> QUP_MSW_SHIFT;
 | 
						|
		}
 | 
						|
	}
 | 
						|
}
 | 
						|
 | 
						|
static int qup_i2c_read_one(struct qup_i2c_dev *qup, struct i2c_msg *msg)
 | 
						|
{
 | 
						|
	unsigned long left;
 | 
						|
	int ret;
 | 
						|
 | 
						|
	/*
 | 
						|
	 * The QUP block will issue a NACK and STOP on the bus when reaching
 | 
						|
	 * the end of the read, the length of the read is specified as one byte
 | 
						|
	 * which limits the possible read to 256 (QUP_READ_LIMIT) bytes.
 | 
						|
	 */
 | 
						|
	if (msg->len > QUP_READ_LIMIT) {
 | 
						|
		dev_err(qup->dev, "HW not capable of reads over %d bytes\n",
 | 
						|
			QUP_READ_LIMIT);
 | 
						|
		return -EINVAL;
 | 
						|
	}
 | 
						|
 | 
						|
	qup->msg = msg;
 | 
						|
	qup->pos  = 0;
 | 
						|
 | 
						|
	enable_irq(qup->irq);
 | 
						|
 | 
						|
	qup_i2c_set_read_mode(qup, msg->len);
 | 
						|
 | 
						|
	ret = qup_i2c_change_state(qup, QUP_RUN_STATE);
 | 
						|
	if (ret)
 | 
						|
		goto err;
 | 
						|
 | 
						|
	writel(qup->clk_ctl, qup->base + QUP_I2C_CLK_CTL);
 | 
						|
 | 
						|
	ret = qup_i2c_change_state(qup, QUP_PAUSE_STATE);
 | 
						|
	if (ret)
 | 
						|
		goto err;
 | 
						|
 | 
						|
	qup_i2c_issue_read(qup, msg);
 | 
						|
 | 
						|
	ret = qup_i2c_change_state(qup, QUP_RUN_STATE);
 | 
						|
	if (ret)
 | 
						|
		goto err;
 | 
						|
 | 
						|
	do {
 | 
						|
		left = wait_for_completion_timeout(&qup->xfer, HZ);
 | 
						|
		if (!left) {
 | 
						|
			writel(1, qup->base + QUP_SW_RESET);
 | 
						|
			ret = -ETIMEDOUT;
 | 
						|
			goto err;
 | 
						|
		}
 | 
						|
 | 
						|
		if (qup->bus_err || qup->qup_err) {
 | 
						|
			if (qup->bus_err & QUP_I2C_NACK_FLAG)
 | 
						|
				dev_err(qup->dev, "NACK from %x\n", msg->addr);
 | 
						|
			ret = -EIO;
 | 
						|
			goto err;
 | 
						|
		}
 | 
						|
 | 
						|
		qup_i2c_read_fifo(qup, msg);
 | 
						|
	} while (qup->pos < msg->len);
 | 
						|
 | 
						|
err:
 | 
						|
	disable_irq(qup->irq);
 | 
						|
	qup->msg = NULL;
 | 
						|
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
 | 
						|
static int qup_i2c_xfer(struct i2c_adapter *adap,
 | 
						|
			struct i2c_msg msgs[],
 | 
						|
			int num)
 | 
						|
{
 | 
						|
	struct qup_i2c_dev *qup = i2c_get_adapdata(adap);
 | 
						|
	int ret, idx;
 | 
						|
 | 
						|
	ret = pm_runtime_get_sync(qup->dev);
 | 
						|
	if (ret < 0)
 | 
						|
		goto out;
 | 
						|
 | 
						|
	writel(1, qup->base + QUP_SW_RESET);
 | 
						|
	ret = qup_i2c_poll_state(qup, QUP_RESET_STATE);
 | 
						|
	if (ret)
 | 
						|
		goto out;
 | 
						|
 | 
						|
	/* Configure QUP as I2C mini core */
 | 
						|
	writel(I2C_MINI_CORE | I2C_N_VAL, qup->base + QUP_CONFIG);
 | 
						|
 | 
						|
	for (idx = 0; idx < num; idx++) {
 | 
						|
		if (msgs[idx].len == 0) {
 | 
						|
			ret = -EINVAL;
 | 
						|
			goto out;
 | 
						|
		}
 | 
						|
 | 
						|
		if (qup_i2c_poll_state_i2c_master(qup)) {
 | 
						|
			ret = -EIO;
 | 
						|
			goto out;
 | 
						|
		}
 | 
						|
 | 
						|
		if (msgs[idx].flags & I2C_M_RD)
 | 
						|
			ret = qup_i2c_read_one(qup, &msgs[idx]);
 | 
						|
		else
 | 
						|
			ret = qup_i2c_write_one(qup, &msgs[idx]);
 | 
						|
 | 
						|
		if (ret)
 | 
						|
			break;
 | 
						|
 | 
						|
		ret = qup_i2c_change_state(qup, QUP_RESET_STATE);
 | 
						|
		if (ret)
 | 
						|
			break;
 | 
						|
	}
 | 
						|
 | 
						|
	if (ret == 0)
 | 
						|
		ret = num;
 | 
						|
out:
 | 
						|
 | 
						|
	pm_runtime_mark_last_busy(qup->dev);
 | 
						|
	pm_runtime_put_autosuspend(qup->dev);
 | 
						|
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
 | 
						|
static u32 qup_i2c_func(struct i2c_adapter *adap)
 | 
						|
{
 | 
						|
	return I2C_FUNC_I2C | (I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK);
 | 
						|
}
 | 
						|
 | 
						|
static const struct i2c_algorithm qup_i2c_algo = {
 | 
						|
	.master_xfer	= qup_i2c_xfer,
 | 
						|
	.functionality	= qup_i2c_func,
 | 
						|
};
 | 
						|
 | 
						|
static void qup_i2c_enable_clocks(struct qup_i2c_dev *qup)
 | 
						|
{
 | 
						|
	clk_prepare_enable(qup->clk);
 | 
						|
	clk_prepare_enable(qup->pclk);
 | 
						|
}
 | 
						|
 | 
						|
static void qup_i2c_disable_clocks(struct qup_i2c_dev *qup)
 | 
						|
{
 | 
						|
	u32 config;
 | 
						|
 | 
						|
	qup_i2c_change_state(qup, QUP_RESET_STATE);
 | 
						|
	clk_disable_unprepare(qup->clk);
 | 
						|
	config = readl(qup->base + QUP_CONFIG);
 | 
						|
	config |= QUP_CLOCK_AUTO_GATE;
 | 
						|
	writel(config, qup->base + QUP_CONFIG);
 | 
						|
	clk_disable_unprepare(qup->pclk);
 | 
						|
}
 | 
						|
 | 
						|
static int qup_i2c_probe(struct platform_device *pdev)
 | 
						|
{
 | 
						|
	static const int blk_sizes[] = {4, 16, 32};
 | 
						|
	struct device_node *node = pdev->dev.of_node;
 | 
						|
	struct qup_i2c_dev *qup;
 | 
						|
	unsigned long one_bit_t;
 | 
						|
	struct resource *res;
 | 
						|
	u32 io_mode, hw_ver, size;
 | 
						|
	int ret, fs_div, hs_div;
 | 
						|
	int src_clk_freq;
 | 
						|
	u32 clk_freq = 100000;
 | 
						|
 | 
						|
	qup = devm_kzalloc(&pdev->dev, sizeof(*qup), GFP_KERNEL);
 | 
						|
	if (!qup)
 | 
						|
		return -ENOMEM;
 | 
						|
 | 
						|
	qup->dev = &pdev->dev;
 | 
						|
	init_completion(&qup->xfer);
 | 
						|
	platform_set_drvdata(pdev, qup);
 | 
						|
 | 
						|
	of_property_read_u32(node, "clock-frequency", &clk_freq);
 | 
						|
 | 
						|
	/* We support frequencies up to FAST Mode (400KHz) */
 | 
						|
	if (!clk_freq || clk_freq > 400000) {
 | 
						|
		dev_err(qup->dev, "clock frequency not supported %d\n",
 | 
						|
			clk_freq);
 | 
						|
		return -EINVAL;
 | 
						|
	}
 | 
						|
 | 
						|
	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 | 
						|
	qup->base = devm_ioremap_resource(qup->dev, res);
 | 
						|
	if (IS_ERR(qup->base))
 | 
						|
		return PTR_ERR(qup->base);
 | 
						|
 | 
						|
	qup->irq = platform_get_irq(pdev, 0);
 | 
						|
	if (qup->irq < 0) {
 | 
						|
		dev_err(qup->dev, "No IRQ defined\n");
 | 
						|
		return qup->irq;
 | 
						|
	}
 | 
						|
 | 
						|
	qup->clk = devm_clk_get(qup->dev, "core");
 | 
						|
	if (IS_ERR(qup->clk)) {
 | 
						|
		dev_err(qup->dev, "Could not get core clock\n");
 | 
						|
		return PTR_ERR(qup->clk);
 | 
						|
	}
 | 
						|
 | 
						|
	qup->pclk = devm_clk_get(qup->dev, "iface");
 | 
						|
	if (IS_ERR(qup->pclk)) {
 | 
						|
		dev_err(qup->dev, "Could not get iface clock\n");
 | 
						|
		return PTR_ERR(qup->pclk);
 | 
						|
	}
 | 
						|
 | 
						|
	qup_i2c_enable_clocks(qup);
 | 
						|
 | 
						|
	/*
 | 
						|
	 * Bootloaders might leave a pending interrupt on certain QUP's,
 | 
						|
	 * so we reset the core before registering for interrupts.
 | 
						|
	 */
 | 
						|
	writel(1, qup->base + QUP_SW_RESET);
 | 
						|
	ret = qup_i2c_poll_state_valid(qup);
 | 
						|
	if (ret)
 | 
						|
		goto fail;
 | 
						|
 | 
						|
	ret = devm_request_irq(qup->dev, qup->irq, qup_i2c_interrupt,
 | 
						|
			       IRQF_TRIGGER_HIGH, "i2c_qup", qup);
 | 
						|
	if (ret) {
 | 
						|
		dev_err(qup->dev, "Request %d IRQ failed\n", qup->irq);
 | 
						|
		goto fail;
 | 
						|
	}
 | 
						|
	disable_irq(qup->irq);
 | 
						|
 | 
						|
	hw_ver = readl(qup->base + QUP_HW_VERSION);
 | 
						|
	dev_dbg(qup->dev, "Revision %x\n", hw_ver);
 | 
						|
 | 
						|
	io_mode = readl(qup->base + QUP_IO_MODE);
 | 
						|
 | 
						|
	/*
 | 
						|
	 * The block/fifo size w.r.t. 'actual data' is 1/2 due to 'tag'
 | 
						|
	 * associated with each byte written/received
 | 
						|
	 */
 | 
						|
	size = QUP_OUTPUT_BLOCK_SIZE(io_mode);
 | 
						|
	if (size >= ARRAY_SIZE(blk_sizes)) {
 | 
						|
		ret = -EIO;
 | 
						|
		goto fail;
 | 
						|
	}
 | 
						|
	qup->out_blk_sz = blk_sizes[size] / 2;
 | 
						|
 | 
						|
	size = QUP_INPUT_BLOCK_SIZE(io_mode);
 | 
						|
	if (size >= ARRAY_SIZE(blk_sizes)) {
 | 
						|
		ret = -EIO;
 | 
						|
		goto fail;
 | 
						|
	}
 | 
						|
	qup->in_blk_sz = blk_sizes[size] / 2;
 | 
						|
 | 
						|
	size = QUP_OUTPUT_FIFO_SIZE(io_mode);
 | 
						|
	qup->out_fifo_sz = qup->out_blk_sz * (2 << size);
 | 
						|
 | 
						|
	size = QUP_INPUT_FIFO_SIZE(io_mode);
 | 
						|
	qup->in_fifo_sz = qup->in_blk_sz * (2 << size);
 | 
						|
 | 
						|
	src_clk_freq = clk_get_rate(qup->clk);
 | 
						|
	fs_div = ((src_clk_freq / clk_freq) / 2) - 3;
 | 
						|
	hs_div = 3;
 | 
						|
	qup->clk_ctl = (hs_div << 8) | (fs_div & 0xff);
 | 
						|
 | 
						|
	/*
 | 
						|
	 * Time it takes for a byte to be clocked out on the bus.
 | 
						|
	 * Each byte takes 9 clock cycles (8 bits + 1 ack).
 | 
						|
	 */
 | 
						|
	one_bit_t = (USEC_PER_SEC / clk_freq) + 1;
 | 
						|
	qup->one_byte_t = one_bit_t * 9;
 | 
						|
 | 
						|
	dev_dbg(qup->dev, "IN:block:%d, fifo:%d, OUT:block:%d, fifo:%d\n",
 | 
						|
		qup->in_blk_sz, qup->in_fifo_sz,
 | 
						|
		qup->out_blk_sz, qup->out_fifo_sz);
 | 
						|
 | 
						|
	i2c_set_adapdata(&qup->adap, qup);
 | 
						|
	qup->adap.algo = &qup_i2c_algo;
 | 
						|
	qup->adap.dev.parent = qup->dev;
 | 
						|
	qup->adap.dev.of_node = pdev->dev.of_node;
 | 
						|
	strlcpy(qup->adap.name, "QUP I2C adapter", sizeof(qup->adap.name));
 | 
						|
 | 
						|
	ret = i2c_add_adapter(&qup->adap);
 | 
						|
	if (ret)
 | 
						|
		goto fail;
 | 
						|
 | 
						|
	pm_runtime_set_autosuspend_delay(qup->dev, MSEC_PER_SEC);
 | 
						|
	pm_runtime_use_autosuspend(qup->dev);
 | 
						|
	pm_runtime_set_active(qup->dev);
 | 
						|
	pm_runtime_enable(qup->dev);
 | 
						|
	return 0;
 | 
						|
 | 
						|
fail:
 | 
						|
	qup_i2c_disable_clocks(qup);
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
 | 
						|
static int qup_i2c_remove(struct platform_device *pdev)
 | 
						|
{
 | 
						|
	struct qup_i2c_dev *qup = platform_get_drvdata(pdev);
 | 
						|
 | 
						|
	disable_irq(qup->irq);
 | 
						|
	qup_i2c_disable_clocks(qup);
 | 
						|
	i2c_del_adapter(&qup->adap);
 | 
						|
	pm_runtime_disable(qup->dev);
 | 
						|
	pm_runtime_set_suspended(qup->dev);
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
#ifdef CONFIG_PM
 | 
						|
static int qup_i2c_pm_suspend_runtime(struct device *device)
 | 
						|
{
 | 
						|
	struct qup_i2c_dev *qup = dev_get_drvdata(device);
 | 
						|
 | 
						|
	dev_dbg(device, "pm_runtime: suspending...\n");
 | 
						|
	qup_i2c_disable_clocks(qup);
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int qup_i2c_pm_resume_runtime(struct device *device)
 | 
						|
{
 | 
						|
	struct qup_i2c_dev *qup = dev_get_drvdata(device);
 | 
						|
 | 
						|
	dev_dbg(device, "pm_runtime: resuming...\n");
 | 
						|
	qup_i2c_enable_clocks(qup);
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
#endif
 | 
						|
 | 
						|
#ifdef CONFIG_PM_SLEEP
 | 
						|
static int qup_i2c_suspend(struct device *device)
 | 
						|
{
 | 
						|
	qup_i2c_pm_suspend_runtime(device);
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int qup_i2c_resume(struct device *device)
 | 
						|
{
 | 
						|
	qup_i2c_pm_resume_runtime(device);
 | 
						|
	pm_runtime_mark_last_busy(device);
 | 
						|
	pm_request_autosuspend(device);
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
#endif
 | 
						|
 | 
						|
static const struct dev_pm_ops qup_i2c_qup_pm_ops = {
 | 
						|
	SET_SYSTEM_SLEEP_PM_OPS(
 | 
						|
		qup_i2c_suspend,
 | 
						|
		qup_i2c_resume)
 | 
						|
	SET_RUNTIME_PM_OPS(
 | 
						|
		qup_i2c_pm_suspend_runtime,
 | 
						|
		qup_i2c_pm_resume_runtime,
 | 
						|
		NULL)
 | 
						|
};
 | 
						|
 | 
						|
static const struct of_device_id qup_i2c_dt_match[] = {
 | 
						|
	{ .compatible = "qcom,i2c-qup-v1.1.1" },
 | 
						|
	{ .compatible = "qcom,i2c-qup-v2.1.1" },
 | 
						|
	{ .compatible = "qcom,i2c-qup-v2.2.1" },
 | 
						|
	{}
 | 
						|
};
 | 
						|
MODULE_DEVICE_TABLE(of, qup_i2c_dt_match);
 | 
						|
 | 
						|
static struct platform_driver qup_i2c_driver = {
 | 
						|
	.probe  = qup_i2c_probe,
 | 
						|
	.remove = qup_i2c_remove,
 | 
						|
	.driver = {
 | 
						|
		.name = "i2c_qup",
 | 
						|
		.owner = THIS_MODULE,
 | 
						|
		.pm = &qup_i2c_qup_pm_ops,
 | 
						|
		.of_match_table = qup_i2c_dt_match,
 | 
						|
	},
 | 
						|
};
 | 
						|
 | 
						|
module_platform_driver(qup_i2c_driver);
 | 
						|
 | 
						|
MODULE_LICENSE("GPL v2");
 | 
						|
MODULE_ALIAS("platform:i2c_qup");
 |