 5cbb3d216e
			
		
	
	
	5cbb3d216e
	
	
	
		
			
			Merge first patch-bomb from Andrew Morton: "Quite a lot of other stuff is banked up awaiting further next->mainline merging, but this batch contains: - Lots of random misc patches - OCFS2 - Most of MM - backlight updates - lib/ updates - printk updates - checkpatch updates - epoll tweaking - rtc updates - hfs - hfsplus - documentation - procfs - update gcov to gcc-4.7 format - IPC" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (269 commits) ipc, msg: fix message length check for negative values ipc/util.c: remove unnecessary work pending test devpts: plug the memory leak in kill_sb ./Makefile: export initial ramdisk compression config option init/Kconfig: add option to disable kernel compression drivers: w1: make w1_slave::flags long to avoid memory corruption drivers/w1/masters/ds1wm.cuse dev_get_platdata() drivers/memstick/core/ms_block.c: fix unreachable state in h_msb_read_page() drivers/memstick/core/mspro_block.c: fix attributes array allocation drivers/pps/clients/pps-gpio.c: remove redundant of_match_ptr kernel/panic.c: reduce 1 byte usage for print tainted buffer gcov: reuse kbasename helper kernel/gcov/fs.c: use pr_warn() kernel/module.c: use pr_foo() gcov: compile specific gcov implementation based on gcc version gcov: add support for gcc 4.7 gcov format gcov: move gcov structs definitions to a gcc version specific file kernel/taskstats.c: return -ENOMEM when alloc memory fails in add_del_listener() kernel/taskstats.c: add nla_nest_cancel() for failure processing between nla_nest_start() and nla_nest_end() kernel/sysctl_binary.c: use scnprintf() instead of snprintf() ...
		
			
				
	
	
		
			378 lines
		
	
	
	
		
			10 KiB
			
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			378 lines
		
	
	
	
		
			10 KiB
			
		
	
	
	
		
			C
		
	
	
	
	
	
| /*
 | |
|  * High-level sync()-related operations
 | |
|  */
 | |
| 
 | |
| #include <linux/kernel.h>
 | |
| #include <linux/file.h>
 | |
| #include <linux/fs.h>
 | |
| #include <linux/slab.h>
 | |
| #include <linux/export.h>
 | |
| #include <linux/namei.h>
 | |
| #include <linux/sched.h>
 | |
| #include <linux/writeback.h>
 | |
| #include <linux/syscalls.h>
 | |
| #include <linux/linkage.h>
 | |
| #include <linux/pagemap.h>
 | |
| #include <linux/quotaops.h>
 | |
| #include <linux/backing-dev.h>
 | |
| #include "internal.h"
 | |
| 
 | |
| #define VALID_FLAGS (SYNC_FILE_RANGE_WAIT_BEFORE|SYNC_FILE_RANGE_WRITE| \
 | |
| 			SYNC_FILE_RANGE_WAIT_AFTER)
 | |
| 
 | |
| /*
 | |
|  * Do the filesystem syncing work. For simple filesystems
 | |
|  * writeback_inodes_sb(sb) just dirties buffers with inodes so we have to
 | |
|  * submit IO for these buffers via __sync_blockdev(). This also speeds up the
 | |
|  * wait == 1 case since in that case write_inode() functions do
 | |
|  * sync_dirty_buffer() and thus effectively write one block at a time.
 | |
|  */
 | |
| static int __sync_filesystem(struct super_block *sb, int wait,
 | |
| 			     unsigned long start)
 | |
| {
 | |
| 	if (wait)
 | |
| 		sync_inodes_sb(sb, start);
 | |
| 	else
 | |
| 		writeback_inodes_sb(sb, WB_REASON_SYNC);
 | |
| 
 | |
| 	if (sb->s_op->sync_fs)
 | |
| 		sb->s_op->sync_fs(sb, wait);
 | |
| 	return __sync_blockdev(sb->s_bdev, wait);
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * Write out and wait upon all dirty data associated with this
 | |
|  * superblock.  Filesystem data as well as the underlying block
 | |
|  * device.  Takes the superblock lock.
 | |
|  */
 | |
| int sync_filesystem(struct super_block *sb)
 | |
| {
 | |
| 	int ret;
 | |
| 	unsigned long start = jiffies;
 | |
| 
 | |
| 	/*
 | |
| 	 * We need to be protected against the filesystem going from
 | |
| 	 * r/o to r/w or vice versa.
 | |
| 	 */
 | |
| 	WARN_ON(!rwsem_is_locked(&sb->s_umount));
 | |
| 
 | |
| 	/*
 | |
| 	 * No point in syncing out anything if the filesystem is read-only.
 | |
| 	 */
 | |
| 	if (sb->s_flags & MS_RDONLY)
 | |
| 		return 0;
 | |
| 
 | |
| 	ret = __sync_filesystem(sb, 0, start);
 | |
| 	if (ret < 0)
 | |
| 		return ret;
 | |
| 	return __sync_filesystem(sb, 1, start);
 | |
| }
 | |
| EXPORT_SYMBOL_GPL(sync_filesystem);
 | |
| 
 | |
| static void sync_inodes_one_sb(struct super_block *sb, void *arg)
 | |
| {
 | |
| 	if (!(sb->s_flags & MS_RDONLY))
 | |
| 		sync_inodes_sb(sb, *((unsigned long *)arg));
 | |
| }
 | |
| 
 | |
| static void sync_fs_one_sb(struct super_block *sb, void *arg)
 | |
| {
 | |
| 	if (!(sb->s_flags & MS_RDONLY) && sb->s_op->sync_fs)
 | |
| 		sb->s_op->sync_fs(sb, *(int *)arg);
 | |
| }
 | |
| 
 | |
| static void fdatawrite_one_bdev(struct block_device *bdev, void *arg)
 | |
| {
 | |
| 	filemap_fdatawrite(bdev->bd_inode->i_mapping);
 | |
| }
 | |
| 
 | |
| static void fdatawait_one_bdev(struct block_device *bdev, void *arg)
 | |
| {
 | |
| 	filemap_fdatawait(bdev->bd_inode->i_mapping);
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * Sync everything. We start by waking flusher threads so that most of
 | |
|  * writeback runs on all devices in parallel. Then we sync all inodes reliably
 | |
|  * which effectively also waits for all flusher threads to finish doing
 | |
|  * writeback. At this point all data is on disk so metadata should be stable
 | |
|  * and we tell filesystems to sync their metadata via ->sync_fs() calls.
 | |
|  * Finally, we writeout all block devices because some filesystems (e.g. ext2)
 | |
|  * just write metadata (such as inodes or bitmaps) to block device page cache
 | |
|  * and do not sync it on their own in ->sync_fs().
 | |
|  */
 | |
| SYSCALL_DEFINE0(sync)
 | |
| {
 | |
| 	int nowait = 0, wait = 1;
 | |
| 	unsigned long start = jiffies;
 | |
| 
 | |
| 	wakeup_flusher_threads(0, WB_REASON_SYNC);
 | |
| 	iterate_supers(sync_inodes_one_sb, &start);
 | |
| 	iterate_supers(sync_fs_one_sb, &nowait);
 | |
| 	iterate_supers(sync_fs_one_sb, &wait);
 | |
| 	iterate_bdevs(fdatawrite_one_bdev, NULL);
 | |
| 	iterate_bdevs(fdatawait_one_bdev, NULL);
 | |
| 	if (unlikely(laptop_mode))
 | |
| 		laptop_sync_completion();
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static void do_sync_work(struct work_struct *work)
 | |
| {
 | |
| 	int nowait = 0;
 | |
| 
 | |
| 	/*
 | |
| 	 * Sync twice to reduce the possibility we skipped some inodes / pages
 | |
| 	 * because they were temporarily locked
 | |
| 	 */
 | |
| 	iterate_supers(sync_inodes_one_sb, &nowait);
 | |
| 	iterate_supers(sync_fs_one_sb, &nowait);
 | |
| 	iterate_bdevs(fdatawrite_one_bdev, NULL);
 | |
| 	iterate_supers(sync_inodes_one_sb, &nowait);
 | |
| 	iterate_supers(sync_fs_one_sb, &nowait);
 | |
| 	iterate_bdevs(fdatawrite_one_bdev, NULL);
 | |
| 	printk("Emergency Sync complete\n");
 | |
| 	kfree(work);
 | |
| }
 | |
| 
 | |
| void emergency_sync(void)
 | |
| {
 | |
| 	struct work_struct *work;
 | |
| 
 | |
| 	work = kmalloc(sizeof(*work), GFP_ATOMIC);
 | |
| 	if (work) {
 | |
| 		INIT_WORK(work, do_sync_work);
 | |
| 		schedule_work(work);
 | |
| 	}
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * sync a single super
 | |
|  */
 | |
| SYSCALL_DEFINE1(syncfs, int, fd)
 | |
| {
 | |
| 	struct fd f = fdget(fd);
 | |
| 	struct super_block *sb;
 | |
| 	int ret;
 | |
| 
 | |
| 	if (!f.file)
 | |
| 		return -EBADF;
 | |
| 	sb = f.file->f_dentry->d_sb;
 | |
| 
 | |
| 	down_read(&sb->s_umount);
 | |
| 	ret = sync_filesystem(sb);
 | |
| 	up_read(&sb->s_umount);
 | |
| 
 | |
| 	fdput(f);
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * vfs_fsync_range - helper to sync a range of data & metadata to disk
 | |
|  * @file:		file to sync
 | |
|  * @start:		offset in bytes of the beginning of data range to sync
 | |
|  * @end:		offset in bytes of the end of data range (inclusive)
 | |
|  * @datasync:		perform only datasync
 | |
|  *
 | |
|  * Write back data in range @start..@end and metadata for @file to disk.  If
 | |
|  * @datasync is set only metadata needed to access modified file data is
 | |
|  * written.
 | |
|  */
 | |
| int vfs_fsync_range(struct file *file, loff_t start, loff_t end, int datasync)
 | |
| {
 | |
| 	if (!file->f_op->fsync)
 | |
| 		return -EINVAL;
 | |
| 	return file->f_op->fsync(file, start, end, datasync);
 | |
| }
 | |
| EXPORT_SYMBOL(vfs_fsync_range);
 | |
| 
 | |
| /**
 | |
|  * vfs_fsync - perform a fsync or fdatasync on a file
 | |
|  * @file:		file to sync
 | |
|  * @datasync:		only perform a fdatasync operation
 | |
|  *
 | |
|  * Write back data and metadata for @file to disk.  If @datasync is
 | |
|  * set only metadata needed to access modified file data is written.
 | |
|  */
 | |
| int vfs_fsync(struct file *file, int datasync)
 | |
| {
 | |
| 	return vfs_fsync_range(file, 0, LLONG_MAX, datasync);
 | |
| }
 | |
| EXPORT_SYMBOL(vfs_fsync);
 | |
| 
 | |
| static int do_fsync(unsigned int fd, int datasync)
 | |
| {
 | |
| 	struct fd f = fdget(fd);
 | |
| 	int ret = -EBADF;
 | |
| 
 | |
| 	if (f.file) {
 | |
| 		ret = vfs_fsync(f.file, datasync);
 | |
| 		fdput(f);
 | |
| 	}
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| SYSCALL_DEFINE1(fsync, unsigned int, fd)
 | |
| {
 | |
| 	return do_fsync(fd, 0);
 | |
| }
 | |
| 
 | |
| SYSCALL_DEFINE1(fdatasync, unsigned int, fd)
 | |
| {
 | |
| 	return do_fsync(fd, 1);
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * generic_write_sync - perform syncing after a write if file / inode is sync
 | |
|  * @file:	file to which the write happened
 | |
|  * @pos:	offset where the write started
 | |
|  * @count:	length of the write
 | |
|  *
 | |
|  * This is just a simple wrapper about our general syncing function.
 | |
|  */
 | |
| int generic_write_sync(struct file *file, loff_t pos, loff_t count)
 | |
| {
 | |
| 	if (!(file->f_flags & O_DSYNC) && !IS_SYNC(file->f_mapping->host))
 | |
| 		return 0;
 | |
| 	return vfs_fsync_range(file, pos, pos + count - 1,
 | |
| 			       (file->f_flags & __O_SYNC) ? 0 : 1);
 | |
| }
 | |
| EXPORT_SYMBOL(generic_write_sync);
 | |
| 
 | |
| /*
 | |
|  * sys_sync_file_range() permits finely controlled syncing over a segment of
 | |
|  * a file in the range offset .. (offset+nbytes-1) inclusive.  If nbytes is
 | |
|  * zero then sys_sync_file_range() will operate from offset out to EOF.
 | |
|  *
 | |
|  * The flag bits are:
 | |
|  *
 | |
|  * SYNC_FILE_RANGE_WAIT_BEFORE: wait upon writeout of all pages in the range
 | |
|  * before performing the write.
 | |
|  *
 | |
|  * SYNC_FILE_RANGE_WRITE: initiate writeout of all those dirty pages in the
 | |
|  * range which are not presently under writeback. Note that this may block for
 | |
|  * significant periods due to exhaustion of disk request structures.
 | |
|  *
 | |
|  * SYNC_FILE_RANGE_WAIT_AFTER: wait upon writeout of all pages in the range
 | |
|  * after performing the write.
 | |
|  *
 | |
|  * Useful combinations of the flag bits are:
 | |
|  *
 | |
|  * SYNC_FILE_RANGE_WAIT_BEFORE|SYNC_FILE_RANGE_WRITE: ensures that all pages
 | |
|  * in the range which were dirty on entry to sys_sync_file_range() are placed
 | |
|  * under writeout.  This is a start-write-for-data-integrity operation.
 | |
|  *
 | |
|  * SYNC_FILE_RANGE_WRITE: start writeout of all dirty pages in the range which
 | |
|  * are not presently under writeout.  This is an asynchronous flush-to-disk
 | |
|  * operation.  Not suitable for data integrity operations.
 | |
|  *
 | |
|  * SYNC_FILE_RANGE_WAIT_BEFORE (or SYNC_FILE_RANGE_WAIT_AFTER): wait for
 | |
|  * completion of writeout of all pages in the range.  This will be used after an
 | |
|  * earlier SYNC_FILE_RANGE_WAIT_BEFORE|SYNC_FILE_RANGE_WRITE operation to wait
 | |
|  * for that operation to complete and to return the result.
 | |
|  *
 | |
|  * SYNC_FILE_RANGE_WAIT_BEFORE|SYNC_FILE_RANGE_WRITE|SYNC_FILE_RANGE_WAIT_AFTER:
 | |
|  * a traditional sync() operation.  This is a write-for-data-integrity operation
 | |
|  * which will ensure that all pages in the range which were dirty on entry to
 | |
|  * sys_sync_file_range() are committed to disk.
 | |
|  *
 | |
|  *
 | |
|  * SYNC_FILE_RANGE_WAIT_BEFORE and SYNC_FILE_RANGE_WAIT_AFTER will detect any
 | |
|  * I/O errors or ENOSPC conditions and will return those to the caller, after
 | |
|  * clearing the EIO and ENOSPC flags in the address_space.
 | |
|  *
 | |
|  * It should be noted that none of these operations write out the file's
 | |
|  * metadata.  So unless the application is strictly performing overwrites of
 | |
|  * already-instantiated disk blocks, there are no guarantees here that the data
 | |
|  * will be available after a crash.
 | |
|  */
 | |
| SYSCALL_DEFINE4(sync_file_range, int, fd, loff_t, offset, loff_t, nbytes,
 | |
| 				unsigned int, flags)
 | |
| {
 | |
| 	int ret;
 | |
| 	struct fd f;
 | |
| 	struct address_space *mapping;
 | |
| 	loff_t endbyte;			/* inclusive */
 | |
| 	umode_t i_mode;
 | |
| 
 | |
| 	ret = -EINVAL;
 | |
| 	if (flags & ~VALID_FLAGS)
 | |
| 		goto out;
 | |
| 
 | |
| 	endbyte = offset + nbytes;
 | |
| 
 | |
| 	if ((s64)offset < 0)
 | |
| 		goto out;
 | |
| 	if ((s64)endbyte < 0)
 | |
| 		goto out;
 | |
| 	if (endbyte < offset)
 | |
| 		goto out;
 | |
| 
 | |
| 	if (sizeof(pgoff_t) == 4) {
 | |
| 		if (offset >= (0x100000000ULL << PAGE_CACHE_SHIFT)) {
 | |
| 			/*
 | |
| 			 * The range starts outside a 32 bit machine's
 | |
| 			 * pagecache addressing capabilities.  Let it "succeed"
 | |
| 			 */
 | |
| 			ret = 0;
 | |
| 			goto out;
 | |
| 		}
 | |
| 		if (endbyte >= (0x100000000ULL << PAGE_CACHE_SHIFT)) {
 | |
| 			/*
 | |
| 			 * Out to EOF
 | |
| 			 */
 | |
| 			nbytes = 0;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	if (nbytes == 0)
 | |
| 		endbyte = LLONG_MAX;
 | |
| 	else
 | |
| 		endbyte--;		/* inclusive */
 | |
| 
 | |
| 	ret = -EBADF;
 | |
| 	f = fdget(fd);
 | |
| 	if (!f.file)
 | |
| 		goto out;
 | |
| 
 | |
| 	i_mode = file_inode(f.file)->i_mode;
 | |
| 	ret = -ESPIPE;
 | |
| 	if (!S_ISREG(i_mode) && !S_ISBLK(i_mode) && !S_ISDIR(i_mode) &&
 | |
| 			!S_ISLNK(i_mode))
 | |
| 		goto out_put;
 | |
| 
 | |
| 	mapping = f.file->f_mapping;
 | |
| 	if (!mapping) {
 | |
| 		ret = -EINVAL;
 | |
| 		goto out_put;
 | |
| 	}
 | |
| 
 | |
| 	ret = 0;
 | |
| 	if (flags & SYNC_FILE_RANGE_WAIT_BEFORE) {
 | |
| 		ret = filemap_fdatawait_range(mapping, offset, endbyte);
 | |
| 		if (ret < 0)
 | |
| 			goto out_put;
 | |
| 	}
 | |
| 
 | |
| 	if (flags & SYNC_FILE_RANGE_WRITE) {
 | |
| 		ret = filemap_fdatawrite_range(mapping, offset, endbyte);
 | |
| 		if (ret < 0)
 | |
| 			goto out_put;
 | |
| 	}
 | |
| 
 | |
| 	if (flags & SYNC_FILE_RANGE_WAIT_AFTER)
 | |
| 		ret = filemap_fdatawait_range(mapping, offset, endbyte);
 | |
| 
 | |
| out_put:
 | |
| 	fdput(f);
 | |
| out:
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| /* It would be nice if people remember that not all the world's an i386
 | |
|    when they introduce new system calls */
 | |
| SYSCALL_DEFINE4(sync_file_range2, int, fd, unsigned int, flags,
 | |
| 				 loff_t, offset, loff_t, nbytes)
 | |
| {
 | |
| 	return sys_sync_file_range(fd, offset, nbytes, flags);
 | |
| }
 |