wm5110 rev D is the first chip to use headphone detection IP 2, specify such and make a small correction as the impedance value is actually read in 0.5 ohm increments now. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
		
			
				
	
	
		
			1479 lines
		
	
	
	
		
			37 KiB
			
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			1479 lines
		
	
	
	
		
			37 KiB
			
		
	
	
	
		
			C
		
	
	
	
	
	
/*
 | 
						|
 * extcon-arizona.c - Extcon driver Wolfson Arizona devices
 | 
						|
 *
 | 
						|
 *  Copyright (C) 2012 Wolfson Microelectronics plc
 | 
						|
 *
 | 
						|
 * This program is free software; you can redistribute it and/or modify
 | 
						|
 * it under the terms of the GNU General Public License as published by
 | 
						|
 * the Free Software Foundation; either version 2 of the License, or
 | 
						|
 * (at your option) any later version.
 | 
						|
 *
 | 
						|
 * This program is distributed in the hope that it will be useful,
 | 
						|
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 | 
						|
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 | 
						|
 * GNU General Public License for more details.
 | 
						|
 */
 | 
						|
 | 
						|
#include <linux/kernel.h>
 | 
						|
#include <linux/module.h>
 | 
						|
#include <linux/i2c.h>
 | 
						|
#include <linux/slab.h>
 | 
						|
#include <linux/interrupt.h>
 | 
						|
#include <linux/err.h>
 | 
						|
#include <linux/gpio.h>
 | 
						|
#include <linux/input.h>
 | 
						|
#include <linux/platform_device.h>
 | 
						|
#include <linux/pm_runtime.h>
 | 
						|
#include <linux/regulator/consumer.h>
 | 
						|
#include <linux/extcon.h>
 | 
						|
 | 
						|
#include <sound/soc.h>
 | 
						|
 | 
						|
#include <linux/mfd/arizona/core.h>
 | 
						|
#include <linux/mfd/arizona/pdata.h>
 | 
						|
#include <linux/mfd/arizona/registers.h>
 | 
						|
 | 
						|
#define ARIZONA_MAX_MICD_RANGE 8
 | 
						|
 | 
						|
#define ARIZONA_ACCDET_MODE_MIC 0
 | 
						|
#define ARIZONA_ACCDET_MODE_HPL 1
 | 
						|
#define ARIZONA_ACCDET_MODE_HPR 2
 | 
						|
 | 
						|
#define ARIZONA_HPDET_MAX 10000
 | 
						|
 | 
						|
#define HPDET_DEBOUNCE 500
 | 
						|
#define DEFAULT_MICD_TIMEOUT 2000
 | 
						|
 | 
						|
#define MICD_LVL_1_TO_7 (ARIZONA_MICD_LVL_1 | ARIZONA_MICD_LVL_2 | \
 | 
						|
			 ARIZONA_MICD_LVL_3 | ARIZONA_MICD_LVL_4 | \
 | 
						|
			 ARIZONA_MICD_LVL_5 | ARIZONA_MICD_LVL_6 | \
 | 
						|
			 ARIZONA_MICD_LVL_7)
 | 
						|
 | 
						|
#define MICD_LVL_0_TO_7 (ARIZONA_MICD_LVL_0 | MICD_LVL_1_TO_7)
 | 
						|
 | 
						|
#define MICD_LVL_0_TO_8 (MICD_LVL_0_TO_7 | ARIZONA_MICD_LVL_8)
 | 
						|
 | 
						|
struct arizona_extcon_info {
 | 
						|
	struct device *dev;
 | 
						|
	struct arizona *arizona;
 | 
						|
	struct mutex lock;
 | 
						|
	struct regulator *micvdd;
 | 
						|
	struct input_dev *input;
 | 
						|
 | 
						|
	u16 last_jackdet;
 | 
						|
 | 
						|
	int micd_mode;
 | 
						|
	const struct arizona_micd_config *micd_modes;
 | 
						|
	int micd_num_modes;
 | 
						|
 | 
						|
	const struct arizona_micd_range *micd_ranges;
 | 
						|
	int num_micd_ranges;
 | 
						|
 | 
						|
	int micd_timeout;
 | 
						|
 | 
						|
	bool micd_reva;
 | 
						|
	bool micd_clamp;
 | 
						|
 | 
						|
	struct delayed_work hpdet_work;
 | 
						|
	struct delayed_work micd_detect_work;
 | 
						|
	struct delayed_work micd_timeout_work;
 | 
						|
 | 
						|
	bool hpdet_active;
 | 
						|
	bool hpdet_done;
 | 
						|
	bool hpdet_retried;
 | 
						|
 | 
						|
	int num_hpdet_res;
 | 
						|
	unsigned int hpdet_res[3];
 | 
						|
 | 
						|
	bool mic;
 | 
						|
	bool detecting;
 | 
						|
	int jack_flips;
 | 
						|
 | 
						|
	int hpdet_ip;
 | 
						|
 | 
						|
	struct extcon_dev edev;
 | 
						|
};
 | 
						|
 | 
						|
static const struct arizona_micd_config micd_default_modes[] = {
 | 
						|
	{ ARIZONA_ACCDET_SRC, 1, 0 },
 | 
						|
	{ 0,                  2, 1 },
 | 
						|
};
 | 
						|
 | 
						|
static const struct arizona_micd_range micd_default_ranges[] = {
 | 
						|
	{ .max =  11, .key = BTN_0 },
 | 
						|
	{ .max =  28, .key = BTN_1 },
 | 
						|
	{ .max =  54, .key = BTN_2 },
 | 
						|
	{ .max = 100, .key = BTN_3 },
 | 
						|
	{ .max = 186, .key = BTN_4 },
 | 
						|
	{ .max = 430, .key = BTN_5 },
 | 
						|
};
 | 
						|
 | 
						|
static const int arizona_micd_levels[] = {
 | 
						|
	3, 6, 8, 11, 13, 16, 18, 21, 23, 26, 28, 31, 34, 36, 39, 41, 44, 46,
 | 
						|
	49, 52, 54, 57, 60, 62, 65, 67, 70, 73, 75, 78, 81, 83, 89, 94, 100,
 | 
						|
	105, 111, 116, 122, 127, 139, 150, 161, 173, 186, 196, 209, 220, 245,
 | 
						|
	270, 295, 321, 348, 375, 402, 430, 489, 550, 614, 681, 752, 903, 1071,
 | 
						|
	1257,
 | 
						|
};
 | 
						|
 | 
						|
#define ARIZONA_CABLE_MECHANICAL 0
 | 
						|
#define ARIZONA_CABLE_MICROPHONE 1
 | 
						|
#define ARIZONA_CABLE_HEADPHONE  2
 | 
						|
#define ARIZONA_CABLE_LINEOUT    3
 | 
						|
 | 
						|
static const char *arizona_cable[] = {
 | 
						|
	"Mechanical",
 | 
						|
	"Microphone",
 | 
						|
	"Headphone",
 | 
						|
	"Line-out",
 | 
						|
	NULL,
 | 
						|
};
 | 
						|
 | 
						|
static void arizona_start_hpdet_acc_id(struct arizona_extcon_info *info);
 | 
						|
 | 
						|
static void arizona_extcon_do_magic(struct arizona_extcon_info *info,
 | 
						|
				    unsigned int magic)
 | 
						|
{
 | 
						|
	struct arizona *arizona = info->arizona;
 | 
						|
	int ret;
 | 
						|
 | 
						|
	mutex_lock(&arizona->dapm->card->dapm_mutex);
 | 
						|
 | 
						|
	arizona->hpdet_magic = magic;
 | 
						|
 | 
						|
	/* Keep the HP output stages disabled while doing the magic */
 | 
						|
	if (magic) {
 | 
						|
		ret = regmap_update_bits(arizona->regmap,
 | 
						|
					 ARIZONA_OUTPUT_ENABLES_1,
 | 
						|
					 ARIZONA_OUT1L_ENA |
 | 
						|
					 ARIZONA_OUT1R_ENA, 0);
 | 
						|
		if (ret != 0)
 | 
						|
			dev_warn(arizona->dev,
 | 
						|
				"Failed to disable headphone outputs: %d\n",
 | 
						|
				 ret);
 | 
						|
	}
 | 
						|
 | 
						|
	ret = regmap_update_bits(arizona->regmap, 0x225, 0x4000,
 | 
						|
				 magic);
 | 
						|
	if (ret != 0)
 | 
						|
		dev_warn(arizona->dev, "Failed to do magic: %d\n",
 | 
						|
				 ret);
 | 
						|
 | 
						|
	ret = regmap_update_bits(arizona->regmap, 0x226, 0x4000,
 | 
						|
				 magic);
 | 
						|
	if (ret != 0)
 | 
						|
		dev_warn(arizona->dev, "Failed to do magic: %d\n",
 | 
						|
			 ret);
 | 
						|
 | 
						|
	/* Restore the desired state while not doing the magic */
 | 
						|
	if (!magic) {
 | 
						|
		ret = regmap_update_bits(arizona->regmap,
 | 
						|
					 ARIZONA_OUTPUT_ENABLES_1,
 | 
						|
					 ARIZONA_OUT1L_ENA |
 | 
						|
					 ARIZONA_OUT1R_ENA, arizona->hp_ena);
 | 
						|
		if (ret != 0)
 | 
						|
			dev_warn(arizona->dev,
 | 
						|
				 "Failed to restore headphone outputs: %d\n",
 | 
						|
				 ret);
 | 
						|
	}
 | 
						|
 | 
						|
	mutex_unlock(&arizona->dapm->card->dapm_mutex);
 | 
						|
}
 | 
						|
 | 
						|
static void arizona_extcon_set_mode(struct arizona_extcon_info *info, int mode)
 | 
						|
{
 | 
						|
	struct arizona *arizona = info->arizona;
 | 
						|
 | 
						|
	mode %= info->micd_num_modes;
 | 
						|
 | 
						|
	if (arizona->pdata.micd_pol_gpio > 0)
 | 
						|
		gpio_set_value_cansleep(arizona->pdata.micd_pol_gpio,
 | 
						|
					info->micd_modes[mode].gpio);
 | 
						|
	regmap_update_bits(arizona->regmap, ARIZONA_MIC_DETECT_1,
 | 
						|
			   ARIZONA_MICD_BIAS_SRC_MASK,
 | 
						|
			   info->micd_modes[mode].bias <<
 | 
						|
			   ARIZONA_MICD_BIAS_SRC_SHIFT);
 | 
						|
	regmap_update_bits(arizona->regmap, ARIZONA_ACCESSORY_DETECT_MODE_1,
 | 
						|
			   ARIZONA_ACCDET_SRC, info->micd_modes[mode].src);
 | 
						|
 | 
						|
	info->micd_mode = mode;
 | 
						|
 | 
						|
	dev_dbg(arizona->dev, "Set jack polarity to %d\n", mode);
 | 
						|
}
 | 
						|
 | 
						|
static const char *arizona_extcon_get_micbias(struct arizona_extcon_info *info)
 | 
						|
{
 | 
						|
	switch (info->micd_modes[0].bias) {
 | 
						|
	case 1:
 | 
						|
		return "MICBIAS1";
 | 
						|
	case 2:
 | 
						|
		return "MICBIAS2";
 | 
						|
	case 3:
 | 
						|
		return "MICBIAS3";
 | 
						|
	default:
 | 
						|
		return "MICVDD";
 | 
						|
	}
 | 
						|
}
 | 
						|
 | 
						|
static void arizona_extcon_pulse_micbias(struct arizona_extcon_info *info)
 | 
						|
{
 | 
						|
	struct arizona *arizona = info->arizona;
 | 
						|
	const char *widget = arizona_extcon_get_micbias(info);
 | 
						|
	struct snd_soc_dapm_context *dapm = arizona->dapm;
 | 
						|
	int ret;
 | 
						|
 | 
						|
	mutex_lock(&dapm->card->dapm_mutex);
 | 
						|
 | 
						|
	ret = snd_soc_dapm_force_enable_pin(dapm, widget);
 | 
						|
	if (ret != 0)
 | 
						|
		dev_warn(arizona->dev, "Failed to enable %s: %d\n",
 | 
						|
			 widget, ret);
 | 
						|
 | 
						|
	mutex_unlock(&dapm->card->dapm_mutex);
 | 
						|
 | 
						|
	snd_soc_dapm_sync(dapm);
 | 
						|
 | 
						|
	if (!arizona->pdata.micd_force_micbias) {
 | 
						|
		mutex_lock(&dapm->card->dapm_mutex);
 | 
						|
 | 
						|
		ret = snd_soc_dapm_disable_pin(arizona->dapm, widget);
 | 
						|
		if (ret != 0)
 | 
						|
			dev_warn(arizona->dev, "Failed to disable %s: %d\n",
 | 
						|
				 widget, ret);
 | 
						|
 | 
						|
		mutex_unlock(&dapm->card->dapm_mutex);
 | 
						|
 | 
						|
		snd_soc_dapm_sync(dapm);
 | 
						|
	}
 | 
						|
}
 | 
						|
 | 
						|
static void arizona_start_mic(struct arizona_extcon_info *info)
 | 
						|
{
 | 
						|
	struct arizona *arizona = info->arizona;
 | 
						|
	bool change;
 | 
						|
	int ret;
 | 
						|
 | 
						|
	/* Microphone detection can't use idle mode */
 | 
						|
	pm_runtime_get(info->dev);
 | 
						|
 | 
						|
	if (info->detecting) {
 | 
						|
		ret = regulator_allow_bypass(info->micvdd, false);
 | 
						|
		if (ret != 0) {
 | 
						|
			dev_err(arizona->dev,
 | 
						|
				"Failed to regulate MICVDD: %d\n",
 | 
						|
				ret);
 | 
						|
		}
 | 
						|
	}
 | 
						|
 | 
						|
	ret = regulator_enable(info->micvdd);
 | 
						|
	if (ret != 0) {
 | 
						|
		dev_err(arizona->dev, "Failed to enable MICVDD: %d\n",
 | 
						|
			ret);
 | 
						|
	}
 | 
						|
 | 
						|
	if (info->micd_reva) {
 | 
						|
		regmap_write(arizona->regmap, 0x80, 0x3);
 | 
						|
		regmap_write(arizona->regmap, 0x294, 0);
 | 
						|
		regmap_write(arizona->regmap, 0x80, 0x0);
 | 
						|
	}
 | 
						|
 | 
						|
	regmap_update_bits(arizona->regmap,
 | 
						|
			   ARIZONA_ACCESSORY_DETECT_MODE_1,
 | 
						|
			   ARIZONA_ACCDET_MODE_MASK, ARIZONA_ACCDET_MODE_MIC);
 | 
						|
 | 
						|
	arizona_extcon_pulse_micbias(info);
 | 
						|
 | 
						|
	regmap_update_bits_check(arizona->regmap, ARIZONA_MIC_DETECT_1,
 | 
						|
				 ARIZONA_MICD_ENA, ARIZONA_MICD_ENA,
 | 
						|
				 &change);
 | 
						|
	if (!change) {
 | 
						|
		regulator_disable(info->micvdd);
 | 
						|
		pm_runtime_put_autosuspend(info->dev);
 | 
						|
	}
 | 
						|
}
 | 
						|
 | 
						|
static void arizona_stop_mic(struct arizona_extcon_info *info)
 | 
						|
{
 | 
						|
	struct arizona *arizona = info->arizona;
 | 
						|
	const char *widget = arizona_extcon_get_micbias(info);
 | 
						|
	struct snd_soc_dapm_context *dapm = arizona->dapm;
 | 
						|
	bool change;
 | 
						|
	int ret;
 | 
						|
 | 
						|
	regmap_update_bits_check(arizona->regmap, ARIZONA_MIC_DETECT_1,
 | 
						|
				 ARIZONA_MICD_ENA, 0,
 | 
						|
				 &change);
 | 
						|
 | 
						|
	mutex_lock(&dapm->card->dapm_mutex);
 | 
						|
 | 
						|
	ret = snd_soc_dapm_disable_pin(dapm, widget);
 | 
						|
	if (ret != 0)
 | 
						|
		dev_warn(arizona->dev,
 | 
						|
			 "Failed to disable %s: %d\n",
 | 
						|
			 widget, ret);
 | 
						|
 | 
						|
	mutex_unlock(&dapm->card->dapm_mutex);
 | 
						|
 | 
						|
	snd_soc_dapm_sync(dapm);
 | 
						|
 | 
						|
	if (info->micd_reva) {
 | 
						|
		regmap_write(arizona->regmap, 0x80, 0x3);
 | 
						|
		regmap_write(arizona->regmap, 0x294, 2);
 | 
						|
		regmap_write(arizona->regmap, 0x80, 0x0);
 | 
						|
	}
 | 
						|
 | 
						|
	ret = regulator_allow_bypass(info->micvdd, true);
 | 
						|
	if (ret != 0) {
 | 
						|
		dev_err(arizona->dev, "Failed to bypass MICVDD: %d\n",
 | 
						|
			ret);
 | 
						|
	}
 | 
						|
 | 
						|
	if (change) {
 | 
						|
		regulator_disable(info->micvdd);
 | 
						|
		pm_runtime_mark_last_busy(info->dev);
 | 
						|
		pm_runtime_put_autosuspend(info->dev);
 | 
						|
	}
 | 
						|
}
 | 
						|
 | 
						|
static struct {
 | 
						|
	unsigned int factor_a;
 | 
						|
	unsigned int factor_b;
 | 
						|
} arizona_hpdet_b_ranges[] = {
 | 
						|
	{  5528,   362464 },
 | 
						|
	{ 11084,  6186851 },
 | 
						|
	{ 11065, 65460395 },
 | 
						|
};
 | 
						|
 | 
						|
static struct {
 | 
						|
	int min;
 | 
						|
	int max;
 | 
						|
} arizona_hpdet_c_ranges[] = {
 | 
						|
	{ 0,       30 },
 | 
						|
	{ 8,      100 },
 | 
						|
	{ 100,   1000 },
 | 
						|
	{ 1000, 10000 },
 | 
						|
};
 | 
						|
 | 
						|
static int arizona_hpdet_read(struct arizona_extcon_info *info)
 | 
						|
{
 | 
						|
	struct arizona *arizona = info->arizona;
 | 
						|
	unsigned int val, range;
 | 
						|
	int ret;
 | 
						|
 | 
						|
	ret = regmap_read(arizona->regmap, ARIZONA_HEADPHONE_DETECT_2, &val);
 | 
						|
	if (ret != 0) {
 | 
						|
		dev_err(arizona->dev, "Failed to read HPDET status: %d\n",
 | 
						|
			ret);
 | 
						|
		return ret;
 | 
						|
	}
 | 
						|
 | 
						|
	switch (info->hpdet_ip) {
 | 
						|
	case 0:
 | 
						|
		if (!(val & ARIZONA_HP_DONE)) {
 | 
						|
			dev_err(arizona->dev, "HPDET did not complete: %x\n",
 | 
						|
				val);
 | 
						|
			return -EAGAIN;
 | 
						|
		}
 | 
						|
 | 
						|
		val &= ARIZONA_HP_LVL_MASK;
 | 
						|
		break;
 | 
						|
 | 
						|
	case 1:
 | 
						|
		if (!(val & ARIZONA_HP_DONE_B)) {
 | 
						|
			dev_err(arizona->dev, "HPDET did not complete: %x\n",
 | 
						|
				val);
 | 
						|
			return -EAGAIN;
 | 
						|
		}
 | 
						|
 | 
						|
		ret = regmap_read(arizona->regmap, ARIZONA_HP_DACVAL, &val);
 | 
						|
		if (ret != 0) {
 | 
						|
			dev_err(arizona->dev, "Failed to read HP value: %d\n",
 | 
						|
				ret);
 | 
						|
			return -EAGAIN;
 | 
						|
		}
 | 
						|
 | 
						|
		regmap_read(arizona->regmap, ARIZONA_HEADPHONE_DETECT_1,
 | 
						|
			    &range);
 | 
						|
		range = (range & ARIZONA_HP_IMPEDANCE_RANGE_MASK)
 | 
						|
			   >> ARIZONA_HP_IMPEDANCE_RANGE_SHIFT;
 | 
						|
 | 
						|
		if (range < ARRAY_SIZE(arizona_hpdet_b_ranges) - 1 &&
 | 
						|
		    (val < 100 || val >= 0x3fb)) {
 | 
						|
			range++;
 | 
						|
			dev_dbg(arizona->dev, "Moving to HPDET range %d\n",
 | 
						|
				range);
 | 
						|
			regmap_update_bits(arizona->regmap,
 | 
						|
					   ARIZONA_HEADPHONE_DETECT_1,
 | 
						|
					   ARIZONA_HP_IMPEDANCE_RANGE_MASK,
 | 
						|
					   range <<
 | 
						|
					   ARIZONA_HP_IMPEDANCE_RANGE_SHIFT);
 | 
						|
			return -EAGAIN;
 | 
						|
		}
 | 
						|
 | 
						|
		/* If we go out of range report top of range */
 | 
						|
		if (val < 100 || val >= 0x3fb) {
 | 
						|
			dev_dbg(arizona->dev, "Measurement out of range\n");
 | 
						|
			return ARIZONA_HPDET_MAX;
 | 
						|
		}
 | 
						|
 | 
						|
		dev_dbg(arizona->dev, "HPDET read %d in range %d\n",
 | 
						|
			val, range);
 | 
						|
 | 
						|
		val = arizona_hpdet_b_ranges[range].factor_b
 | 
						|
			/ ((val * 100) -
 | 
						|
			   arizona_hpdet_b_ranges[range].factor_a);
 | 
						|
		break;
 | 
						|
 | 
						|
	default:
 | 
						|
		dev_warn(arizona->dev, "Unknown HPDET IP revision %d\n",
 | 
						|
			 info->hpdet_ip);
 | 
						|
	case 2:
 | 
						|
		if (!(val & ARIZONA_HP_DONE_B)) {
 | 
						|
			dev_err(arizona->dev, "HPDET did not complete: %x\n",
 | 
						|
				val);
 | 
						|
			return -EAGAIN;
 | 
						|
		}
 | 
						|
 | 
						|
		val &= ARIZONA_HP_LVL_B_MASK;
 | 
						|
		/* Convert to ohms, the value is in 0.5 ohm increments */
 | 
						|
		val /= 2;
 | 
						|
 | 
						|
		regmap_read(arizona->regmap, ARIZONA_HEADPHONE_DETECT_1,
 | 
						|
			    &range);
 | 
						|
		range = (range & ARIZONA_HP_IMPEDANCE_RANGE_MASK)
 | 
						|
			   >> ARIZONA_HP_IMPEDANCE_RANGE_SHIFT;
 | 
						|
 | 
						|
		/* Skip up a range, or report? */
 | 
						|
		if (range < ARRAY_SIZE(arizona_hpdet_c_ranges) - 1 &&
 | 
						|
		    (val >= arizona_hpdet_c_ranges[range].max)) {
 | 
						|
			range++;
 | 
						|
			dev_dbg(arizona->dev, "Moving to HPDET range %d-%d\n",
 | 
						|
				arizona_hpdet_c_ranges[range].min,
 | 
						|
				arizona_hpdet_c_ranges[range].max);
 | 
						|
			regmap_update_bits(arizona->regmap,
 | 
						|
					   ARIZONA_HEADPHONE_DETECT_1,
 | 
						|
					   ARIZONA_HP_IMPEDANCE_RANGE_MASK,
 | 
						|
					   range <<
 | 
						|
					   ARIZONA_HP_IMPEDANCE_RANGE_SHIFT);
 | 
						|
			return -EAGAIN;
 | 
						|
		}
 | 
						|
 | 
						|
		if (range && (val < arizona_hpdet_c_ranges[range].min)) {
 | 
						|
			dev_dbg(arizona->dev, "Reporting range boundary %d\n",
 | 
						|
				arizona_hpdet_c_ranges[range].min);
 | 
						|
			val = arizona_hpdet_c_ranges[range].min;
 | 
						|
		}
 | 
						|
	}
 | 
						|
 | 
						|
	dev_dbg(arizona->dev, "HP impedance %d ohms\n", val);
 | 
						|
	return val;
 | 
						|
}
 | 
						|
 | 
						|
static int arizona_hpdet_do_id(struct arizona_extcon_info *info, int *reading,
 | 
						|
			       bool *mic)
 | 
						|
{
 | 
						|
	struct arizona *arizona = info->arizona;
 | 
						|
	int id_gpio = arizona->pdata.hpdet_id_gpio;
 | 
						|
 | 
						|
	/*
 | 
						|
	 * If we're using HPDET for accessory identification we need
 | 
						|
	 * to take multiple measurements, step through them in sequence.
 | 
						|
	 */
 | 
						|
	if (arizona->pdata.hpdet_acc_id) {
 | 
						|
		info->hpdet_res[info->num_hpdet_res++] = *reading;
 | 
						|
 | 
						|
		/* Only check the mic directly if we didn't already ID it */
 | 
						|
		if (id_gpio && info->num_hpdet_res == 1) {
 | 
						|
			dev_dbg(arizona->dev, "Measuring mic\n");
 | 
						|
 | 
						|
			regmap_update_bits(arizona->regmap,
 | 
						|
					   ARIZONA_ACCESSORY_DETECT_MODE_1,
 | 
						|
					   ARIZONA_ACCDET_MODE_MASK |
 | 
						|
					   ARIZONA_ACCDET_SRC,
 | 
						|
					   ARIZONA_ACCDET_MODE_HPR |
 | 
						|
					   info->micd_modes[0].src);
 | 
						|
 | 
						|
			gpio_set_value_cansleep(id_gpio, 1);
 | 
						|
 | 
						|
			regmap_update_bits(arizona->regmap,
 | 
						|
					   ARIZONA_HEADPHONE_DETECT_1,
 | 
						|
					   ARIZONA_HP_POLL, ARIZONA_HP_POLL);
 | 
						|
			return -EAGAIN;
 | 
						|
		}
 | 
						|
 | 
						|
		/* OK, got both.  Now, compare... */
 | 
						|
		dev_dbg(arizona->dev, "HPDET measured %d %d\n",
 | 
						|
			info->hpdet_res[0], info->hpdet_res[1]);
 | 
						|
 | 
						|
		/* Take the headphone impedance for the main report */
 | 
						|
		*reading = info->hpdet_res[0];
 | 
						|
 | 
						|
		/* Sometimes we get false readings due to slow insert */
 | 
						|
		if (*reading >= ARIZONA_HPDET_MAX && !info->hpdet_retried) {
 | 
						|
			dev_dbg(arizona->dev, "Retrying high impedance\n");
 | 
						|
			info->num_hpdet_res = 0;
 | 
						|
			info->hpdet_retried = true;
 | 
						|
			arizona_start_hpdet_acc_id(info);
 | 
						|
			pm_runtime_put(info->dev);
 | 
						|
			return -EAGAIN;
 | 
						|
		}
 | 
						|
 | 
						|
		/*
 | 
						|
		 * If we measure the mic as high impedance
 | 
						|
		 */
 | 
						|
		if (!id_gpio || info->hpdet_res[1] > 50) {
 | 
						|
			dev_dbg(arizona->dev, "Detected mic\n");
 | 
						|
			*mic = true;
 | 
						|
			info->detecting = true;
 | 
						|
		} else {
 | 
						|
			dev_dbg(arizona->dev, "Detected headphone\n");
 | 
						|
		}
 | 
						|
 | 
						|
		/* Make sure everything is reset back to the real polarity */
 | 
						|
		regmap_update_bits(arizona->regmap,
 | 
						|
				   ARIZONA_ACCESSORY_DETECT_MODE_1,
 | 
						|
				   ARIZONA_ACCDET_SRC,
 | 
						|
				   info->micd_modes[0].src);
 | 
						|
	}
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static irqreturn_t arizona_hpdet_irq(int irq, void *data)
 | 
						|
{
 | 
						|
	struct arizona_extcon_info *info = data;
 | 
						|
	struct arizona *arizona = info->arizona;
 | 
						|
	int id_gpio = arizona->pdata.hpdet_id_gpio;
 | 
						|
	int report = ARIZONA_CABLE_HEADPHONE;
 | 
						|
	int ret, reading;
 | 
						|
	bool mic = false;
 | 
						|
 | 
						|
	mutex_lock(&info->lock);
 | 
						|
 | 
						|
	/* If we got a spurious IRQ for some reason then ignore it */
 | 
						|
	if (!info->hpdet_active) {
 | 
						|
		dev_warn(arizona->dev, "Spurious HPDET IRQ\n");
 | 
						|
		mutex_unlock(&info->lock);
 | 
						|
		return IRQ_NONE;
 | 
						|
	}
 | 
						|
 | 
						|
	/* If the cable was removed while measuring ignore the result */
 | 
						|
	ret = extcon_get_cable_state_(&info->edev, ARIZONA_CABLE_MECHANICAL);
 | 
						|
	if (ret < 0) {
 | 
						|
		dev_err(arizona->dev, "Failed to check cable state: %d\n",
 | 
						|
			ret);
 | 
						|
		goto out;
 | 
						|
	} else if (!ret) {
 | 
						|
		dev_dbg(arizona->dev, "Ignoring HPDET for removed cable\n");
 | 
						|
		goto done;
 | 
						|
	}
 | 
						|
 | 
						|
	ret = arizona_hpdet_read(info);
 | 
						|
	if (ret == -EAGAIN)
 | 
						|
		goto out;
 | 
						|
	else if (ret < 0)
 | 
						|
		goto done;
 | 
						|
	reading = ret;
 | 
						|
 | 
						|
	/* Reset back to starting range */
 | 
						|
	regmap_update_bits(arizona->regmap,
 | 
						|
			   ARIZONA_HEADPHONE_DETECT_1,
 | 
						|
			   ARIZONA_HP_IMPEDANCE_RANGE_MASK | ARIZONA_HP_POLL,
 | 
						|
			   0);
 | 
						|
 | 
						|
	ret = arizona_hpdet_do_id(info, &reading, &mic);
 | 
						|
	if (ret == -EAGAIN)
 | 
						|
		goto out;
 | 
						|
	else if (ret < 0)
 | 
						|
		goto done;
 | 
						|
 | 
						|
	/* Report high impedence cables as line outputs */
 | 
						|
	if (reading >= 5000)
 | 
						|
		report = ARIZONA_CABLE_LINEOUT;
 | 
						|
	else
 | 
						|
		report = ARIZONA_CABLE_HEADPHONE;
 | 
						|
 | 
						|
	ret = extcon_set_cable_state_(&info->edev, report, true);
 | 
						|
	if (ret != 0)
 | 
						|
		dev_err(arizona->dev, "Failed to report HP/line: %d\n",
 | 
						|
			ret);
 | 
						|
 | 
						|
done:
 | 
						|
	/* Reset back to starting range */
 | 
						|
	regmap_update_bits(arizona->regmap,
 | 
						|
			   ARIZONA_HEADPHONE_DETECT_1,
 | 
						|
			   ARIZONA_HP_IMPEDANCE_RANGE_MASK | ARIZONA_HP_POLL,
 | 
						|
			   0);
 | 
						|
 | 
						|
	arizona_extcon_do_magic(info, 0);
 | 
						|
 | 
						|
	if (id_gpio)
 | 
						|
		gpio_set_value_cansleep(id_gpio, 0);
 | 
						|
 | 
						|
	/* Revert back to MICDET mode */
 | 
						|
	regmap_update_bits(arizona->regmap,
 | 
						|
			   ARIZONA_ACCESSORY_DETECT_MODE_1,
 | 
						|
			   ARIZONA_ACCDET_MODE_MASK, ARIZONA_ACCDET_MODE_MIC);
 | 
						|
 | 
						|
	/* If we have a mic then reenable MICDET */
 | 
						|
	if (mic || info->mic)
 | 
						|
		arizona_start_mic(info);
 | 
						|
 | 
						|
	if (info->hpdet_active) {
 | 
						|
		pm_runtime_put_autosuspend(info->dev);
 | 
						|
		info->hpdet_active = false;
 | 
						|
	}
 | 
						|
 | 
						|
	info->hpdet_done = true;
 | 
						|
 | 
						|
out:
 | 
						|
	mutex_unlock(&info->lock);
 | 
						|
 | 
						|
	return IRQ_HANDLED;
 | 
						|
}
 | 
						|
 | 
						|
static void arizona_identify_headphone(struct arizona_extcon_info *info)
 | 
						|
{
 | 
						|
	struct arizona *arizona = info->arizona;
 | 
						|
	int ret;
 | 
						|
 | 
						|
	if (info->hpdet_done)
 | 
						|
		return;
 | 
						|
 | 
						|
	dev_dbg(arizona->dev, "Starting HPDET\n");
 | 
						|
 | 
						|
	/* Make sure we keep the device enabled during the measurement */
 | 
						|
	pm_runtime_get(info->dev);
 | 
						|
 | 
						|
	info->hpdet_active = true;
 | 
						|
 | 
						|
	if (info->mic)
 | 
						|
		arizona_stop_mic(info);
 | 
						|
 | 
						|
	arizona_extcon_do_magic(info, 0x4000);
 | 
						|
 | 
						|
	ret = regmap_update_bits(arizona->regmap,
 | 
						|
				 ARIZONA_ACCESSORY_DETECT_MODE_1,
 | 
						|
				 ARIZONA_ACCDET_MODE_MASK,
 | 
						|
				 ARIZONA_ACCDET_MODE_HPL);
 | 
						|
	if (ret != 0) {
 | 
						|
		dev_err(arizona->dev, "Failed to set HPDETL mode: %d\n", ret);
 | 
						|
		goto err;
 | 
						|
	}
 | 
						|
 | 
						|
	ret = regmap_update_bits(arizona->regmap, ARIZONA_HEADPHONE_DETECT_1,
 | 
						|
				 ARIZONA_HP_POLL, ARIZONA_HP_POLL);
 | 
						|
	if (ret != 0) {
 | 
						|
		dev_err(arizona->dev, "Can't start HPDETL measurement: %d\n",
 | 
						|
			ret);
 | 
						|
		goto err;
 | 
						|
	}
 | 
						|
 | 
						|
	return;
 | 
						|
 | 
						|
err:
 | 
						|
	regmap_update_bits(arizona->regmap, ARIZONA_ACCESSORY_DETECT_MODE_1,
 | 
						|
			   ARIZONA_ACCDET_MODE_MASK, ARIZONA_ACCDET_MODE_MIC);
 | 
						|
 | 
						|
	/* Just report headphone */
 | 
						|
	ret = extcon_update_state(&info->edev,
 | 
						|
				  1 << ARIZONA_CABLE_HEADPHONE,
 | 
						|
				  1 << ARIZONA_CABLE_HEADPHONE);
 | 
						|
	if (ret != 0)
 | 
						|
		dev_err(arizona->dev, "Failed to report headphone: %d\n", ret);
 | 
						|
 | 
						|
	if (info->mic)
 | 
						|
		arizona_start_mic(info);
 | 
						|
 | 
						|
	info->hpdet_active = false;
 | 
						|
}
 | 
						|
 | 
						|
static void arizona_start_hpdet_acc_id(struct arizona_extcon_info *info)
 | 
						|
{
 | 
						|
	struct arizona *arizona = info->arizona;
 | 
						|
	int hp_reading = 32;
 | 
						|
	bool mic;
 | 
						|
	int ret;
 | 
						|
 | 
						|
	dev_dbg(arizona->dev, "Starting identification via HPDET\n");
 | 
						|
 | 
						|
	/* Make sure we keep the device enabled during the measurement */
 | 
						|
	pm_runtime_get_sync(info->dev);
 | 
						|
 | 
						|
	info->hpdet_active = true;
 | 
						|
 | 
						|
	arizona_extcon_do_magic(info, 0x4000);
 | 
						|
 | 
						|
	ret = regmap_update_bits(arizona->regmap,
 | 
						|
				 ARIZONA_ACCESSORY_DETECT_MODE_1,
 | 
						|
				 ARIZONA_ACCDET_SRC | ARIZONA_ACCDET_MODE_MASK,
 | 
						|
				 info->micd_modes[0].src |
 | 
						|
				 ARIZONA_ACCDET_MODE_HPL);
 | 
						|
	if (ret != 0) {
 | 
						|
		dev_err(arizona->dev, "Failed to set HPDETL mode: %d\n", ret);
 | 
						|
		goto err;
 | 
						|
	}
 | 
						|
 | 
						|
	if (arizona->pdata.hpdet_acc_id_line) {
 | 
						|
		ret = regmap_update_bits(arizona->regmap,
 | 
						|
					 ARIZONA_HEADPHONE_DETECT_1,
 | 
						|
					 ARIZONA_HP_POLL, ARIZONA_HP_POLL);
 | 
						|
		if (ret != 0) {
 | 
						|
			dev_err(arizona->dev,
 | 
						|
				"Can't start HPDETL measurement: %d\n",
 | 
						|
				ret);
 | 
						|
			goto err;
 | 
						|
		}
 | 
						|
	} else {
 | 
						|
		arizona_hpdet_do_id(info, &hp_reading, &mic);
 | 
						|
	}
 | 
						|
 | 
						|
	return;
 | 
						|
 | 
						|
err:
 | 
						|
	regmap_update_bits(arizona->regmap, ARIZONA_ACCESSORY_DETECT_MODE_1,
 | 
						|
			   ARIZONA_ACCDET_MODE_MASK, ARIZONA_ACCDET_MODE_MIC);
 | 
						|
 | 
						|
	/* Just report headphone */
 | 
						|
	ret = extcon_update_state(&info->edev,
 | 
						|
				  1 << ARIZONA_CABLE_HEADPHONE,
 | 
						|
				  1 << ARIZONA_CABLE_HEADPHONE);
 | 
						|
	if (ret != 0)
 | 
						|
		dev_err(arizona->dev, "Failed to report headphone: %d\n", ret);
 | 
						|
 | 
						|
	info->hpdet_active = false;
 | 
						|
}
 | 
						|
 | 
						|
static void arizona_micd_timeout_work(struct work_struct *work)
 | 
						|
{
 | 
						|
	struct arizona_extcon_info *info = container_of(work,
 | 
						|
						struct arizona_extcon_info,
 | 
						|
						micd_timeout_work.work);
 | 
						|
 | 
						|
	mutex_lock(&info->lock);
 | 
						|
 | 
						|
	dev_dbg(info->arizona->dev, "MICD timed out, reporting HP\n");
 | 
						|
	arizona_identify_headphone(info);
 | 
						|
 | 
						|
	info->detecting = false;
 | 
						|
 | 
						|
	arizona_stop_mic(info);
 | 
						|
 | 
						|
	mutex_unlock(&info->lock);
 | 
						|
}
 | 
						|
 | 
						|
static void arizona_micd_detect(struct work_struct *work)
 | 
						|
{
 | 
						|
	struct arizona_extcon_info *info = container_of(work,
 | 
						|
						struct arizona_extcon_info,
 | 
						|
						micd_detect_work.work);
 | 
						|
	struct arizona *arizona = info->arizona;
 | 
						|
	unsigned int val = 0, lvl;
 | 
						|
	int ret, i, key;
 | 
						|
 | 
						|
	cancel_delayed_work_sync(&info->micd_timeout_work);
 | 
						|
 | 
						|
	mutex_lock(&info->lock);
 | 
						|
 | 
						|
	/* If the cable was removed while measuring ignore the result */
 | 
						|
	ret = extcon_get_cable_state_(&info->edev, ARIZONA_CABLE_MECHANICAL);
 | 
						|
	if (ret < 0) {
 | 
						|
		dev_err(arizona->dev, "Failed to check cable state: %d\n",
 | 
						|
				ret);
 | 
						|
		mutex_unlock(&info->lock);
 | 
						|
		return;
 | 
						|
	} else if (!ret) {
 | 
						|
		dev_dbg(arizona->dev, "Ignoring MICDET for removed cable\n");
 | 
						|
		mutex_unlock(&info->lock);
 | 
						|
		return;
 | 
						|
	}
 | 
						|
 | 
						|
	for (i = 0; i < 10 && !(val & MICD_LVL_0_TO_8); i++) {
 | 
						|
		ret = regmap_read(arizona->regmap, ARIZONA_MIC_DETECT_3, &val);
 | 
						|
		if (ret != 0) {
 | 
						|
			dev_err(arizona->dev,
 | 
						|
				"Failed to read MICDET: %d\n", ret);
 | 
						|
			mutex_unlock(&info->lock);
 | 
						|
			return;
 | 
						|
		}
 | 
						|
 | 
						|
		dev_dbg(arizona->dev, "MICDET: %x\n", val);
 | 
						|
 | 
						|
		if (!(val & ARIZONA_MICD_VALID)) {
 | 
						|
			dev_warn(arizona->dev,
 | 
						|
				 "Microphone detection state invalid\n");
 | 
						|
			mutex_unlock(&info->lock);
 | 
						|
			return;
 | 
						|
		}
 | 
						|
	}
 | 
						|
 | 
						|
	if (i == 10 && !(val & MICD_LVL_0_TO_8)) {
 | 
						|
		dev_err(arizona->dev, "Failed to get valid MICDET value\n");
 | 
						|
		mutex_unlock(&info->lock);
 | 
						|
		return;
 | 
						|
	}
 | 
						|
 | 
						|
	/* Due to jack detect this should never happen */
 | 
						|
	if (!(val & ARIZONA_MICD_STS)) {
 | 
						|
		dev_warn(arizona->dev, "Detected open circuit\n");
 | 
						|
		info->detecting = false;
 | 
						|
		goto handled;
 | 
						|
	}
 | 
						|
 | 
						|
	/* If we got a high impedence we should have a headset, report it. */
 | 
						|
	if (info->detecting && (val & ARIZONA_MICD_LVL_8)) {
 | 
						|
		arizona_identify_headphone(info);
 | 
						|
 | 
						|
		ret = extcon_update_state(&info->edev,
 | 
						|
					  1 << ARIZONA_CABLE_MICROPHONE,
 | 
						|
					  1 << ARIZONA_CABLE_MICROPHONE);
 | 
						|
 | 
						|
		if (ret != 0)
 | 
						|
			dev_err(arizona->dev, "Headset report failed: %d\n",
 | 
						|
				ret);
 | 
						|
 | 
						|
		/* Don't need to regulate for button detection */
 | 
						|
		ret = regulator_allow_bypass(info->micvdd, false);
 | 
						|
		if (ret != 0) {
 | 
						|
			dev_err(arizona->dev, "Failed to bypass MICVDD: %d\n",
 | 
						|
				ret);
 | 
						|
		}
 | 
						|
 | 
						|
		info->mic = true;
 | 
						|
		info->detecting = false;
 | 
						|
		goto handled;
 | 
						|
	}
 | 
						|
 | 
						|
	/* If we detected a lower impedence during initial startup
 | 
						|
	 * then we probably have the wrong polarity, flip it.  Don't
 | 
						|
	 * do this for the lowest impedences to speed up detection of
 | 
						|
	 * plain headphones.  If both polarities report a low
 | 
						|
	 * impedence then give up and report headphones.
 | 
						|
	 */
 | 
						|
	if (info->detecting && (val & MICD_LVL_1_TO_7)) {
 | 
						|
		if (info->jack_flips >= info->micd_num_modes * 10) {
 | 
						|
			dev_dbg(arizona->dev, "Detected HP/line\n");
 | 
						|
			arizona_identify_headphone(info);
 | 
						|
 | 
						|
			info->detecting = false;
 | 
						|
 | 
						|
			arizona_stop_mic(info);
 | 
						|
		} else {
 | 
						|
			info->micd_mode++;
 | 
						|
			if (info->micd_mode == info->micd_num_modes)
 | 
						|
				info->micd_mode = 0;
 | 
						|
			arizona_extcon_set_mode(info, info->micd_mode);
 | 
						|
 | 
						|
			info->jack_flips++;
 | 
						|
		}
 | 
						|
 | 
						|
		goto handled;
 | 
						|
	}
 | 
						|
 | 
						|
	/*
 | 
						|
	 * If we're still detecting and we detect a short then we've
 | 
						|
	 * got a headphone.  Otherwise it's a button press.
 | 
						|
	 */
 | 
						|
	if (val & MICD_LVL_0_TO_7) {
 | 
						|
		if (info->mic) {
 | 
						|
			dev_dbg(arizona->dev, "Mic button detected\n");
 | 
						|
 | 
						|
			lvl = val & ARIZONA_MICD_LVL_MASK;
 | 
						|
			lvl >>= ARIZONA_MICD_LVL_SHIFT;
 | 
						|
 | 
						|
			for (i = 0; i < info->num_micd_ranges; i++)
 | 
						|
				input_report_key(info->input,
 | 
						|
						 info->micd_ranges[i].key, 0);
 | 
						|
 | 
						|
			WARN_ON(!lvl);
 | 
						|
			WARN_ON(ffs(lvl) - 1 >= info->num_micd_ranges);
 | 
						|
			if (lvl && ffs(lvl) - 1 < info->num_micd_ranges) {
 | 
						|
				key = info->micd_ranges[ffs(lvl) - 1].key;
 | 
						|
				input_report_key(info->input, key, 1);
 | 
						|
				input_sync(info->input);
 | 
						|
			}
 | 
						|
 | 
						|
		} else if (info->detecting) {
 | 
						|
			dev_dbg(arizona->dev, "Headphone detected\n");
 | 
						|
			info->detecting = false;
 | 
						|
			arizona_stop_mic(info);
 | 
						|
 | 
						|
			arizona_identify_headphone(info);
 | 
						|
		} else {
 | 
						|
			dev_warn(arizona->dev, "Button with no mic: %x\n",
 | 
						|
				 val);
 | 
						|
		}
 | 
						|
	} else {
 | 
						|
		dev_dbg(arizona->dev, "Mic button released\n");
 | 
						|
		for (i = 0; i < info->num_micd_ranges; i++)
 | 
						|
			input_report_key(info->input,
 | 
						|
					 info->micd_ranges[i].key, 0);
 | 
						|
		input_sync(info->input);
 | 
						|
		arizona_extcon_pulse_micbias(info);
 | 
						|
	}
 | 
						|
 | 
						|
handled:
 | 
						|
	if (info->detecting)
 | 
						|
		queue_delayed_work(system_power_efficient_wq,
 | 
						|
				   &info->micd_timeout_work,
 | 
						|
				   msecs_to_jiffies(info->micd_timeout));
 | 
						|
 | 
						|
	pm_runtime_mark_last_busy(info->dev);
 | 
						|
	mutex_unlock(&info->lock);
 | 
						|
}
 | 
						|
 | 
						|
static irqreturn_t arizona_micdet(int irq, void *data)
 | 
						|
{
 | 
						|
	struct arizona_extcon_info *info = data;
 | 
						|
	struct arizona *arizona = info->arizona;
 | 
						|
	int debounce = arizona->pdata.micd_detect_debounce;
 | 
						|
 | 
						|
	cancel_delayed_work_sync(&info->micd_detect_work);
 | 
						|
	cancel_delayed_work_sync(&info->micd_timeout_work);
 | 
						|
 | 
						|
	mutex_lock(&info->lock);
 | 
						|
	if (!info->detecting)
 | 
						|
		debounce = 0;
 | 
						|
	mutex_unlock(&info->lock);
 | 
						|
 | 
						|
	if (debounce)
 | 
						|
		queue_delayed_work(system_power_efficient_wq,
 | 
						|
				   &info->micd_detect_work,
 | 
						|
				   msecs_to_jiffies(debounce));
 | 
						|
	else
 | 
						|
		arizona_micd_detect(&info->micd_detect_work.work);
 | 
						|
 | 
						|
	return IRQ_HANDLED;
 | 
						|
}
 | 
						|
 | 
						|
static void arizona_hpdet_work(struct work_struct *work)
 | 
						|
{
 | 
						|
	struct arizona_extcon_info *info = container_of(work,
 | 
						|
						struct arizona_extcon_info,
 | 
						|
						hpdet_work.work);
 | 
						|
 | 
						|
	mutex_lock(&info->lock);
 | 
						|
	arizona_start_hpdet_acc_id(info);
 | 
						|
	mutex_unlock(&info->lock);
 | 
						|
}
 | 
						|
 | 
						|
static irqreturn_t arizona_jackdet(int irq, void *data)
 | 
						|
{
 | 
						|
	struct arizona_extcon_info *info = data;
 | 
						|
	struct arizona *arizona = info->arizona;
 | 
						|
	unsigned int val, present, mask;
 | 
						|
	bool cancelled_hp, cancelled_mic;
 | 
						|
	int ret, i;
 | 
						|
 | 
						|
	cancelled_hp = cancel_delayed_work_sync(&info->hpdet_work);
 | 
						|
	cancelled_mic = cancel_delayed_work_sync(&info->micd_timeout_work);
 | 
						|
 | 
						|
	pm_runtime_get_sync(info->dev);
 | 
						|
 | 
						|
	mutex_lock(&info->lock);
 | 
						|
 | 
						|
	if (arizona->pdata.jd_gpio5) {
 | 
						|
		mask = ARIZONA_MICD_CLAMP_STS;
 | 
						|
		present = 0;
 | 
						|
	} else {
 | 
						|
		mask = ARIZONA_JD1_STS;
 | 
						|
		present = ARIZONA_JD1_STS;
 | 
						|
	}
 | 
						|
 | 
						|
	ret = regmap_read(arizona->regmap, ARIZONA_AOD_IRQ_RAW_STATUS, &val);
 | 
						|
	if (ret != 0) {
 | 
						|
		dev_err(arizona->dev, "Failed to read jackdet status: %d\n",
 | 
						|
			ret);
 | 
						|
		mutex_unlock(&info->lock);
 | 
						|
		pm_runtime_put_autosuspend(info->dev);
 | 
						|
		return IRQ_NONE;
 | 
						|
	}
 | 
						|
 | 
						|
	val &= mask;
 | 
						|
	if (val == info->last_jackdet) {
 | 
						|
		dev_dbg(arizona->dev, "Suppressing duplicate JACKDET\n");
 | 
						|
		if (cancelled_hp)
 | 
						|
			queue_delayed_work(system_power_efficient_wq,
 | 
						|
					   &info->hpdet_work,
 | 
						|
					   msecs_to_jiffies(HPDET_DEBOUNCE));
 | 
						|
 | 
						|
		if (cancelled_mic) {
 | 
						|
			int micd_timeout = info->micd_timeout;
 | 
						|
 | 
						|
			queue_delayed_work(system_power_efficient_wq,
 | 
						|
					   &info->micd_timeout_work,
 | 
						|
					   msecs_to_jiffies(micd_timeout));
 | 
						|
		}
 | 
						|
 | 
						|
		goto out;
 | 
						|
	}
 | 
						|
	info->last_jackdet = val;
 | 
						|
 | 
						|
	if (info->last_jackdet == present) {
 | 
						|
		dev_dbg(arizona->dev, "Detected jack\n");
 | 
						|
		ret = extcon_set_cable_state_(&info->edev,
 | 
						|
					      ARIZONA_CABLE_MECHANICAL, true);
 | 
						|
 | 
						|
		if (ret != 0)
 | 
						|
			dev_err(arizona->dev, "Mechanical report failed: %d\n",
 | 
						|
				ret);
 | 
						|
 | 
						|
		if (!arizona->pdata.hpdet_acc_id) {
 | 
						|
			info->detecting = true;
 | 
						|
			info->mic = false;
 | 
						|
			info->jack_flips = 0;
 | 
						|
 | 
						|
			arizona_start_mic(info);
 | 
						|
		} else {
 | 
						|
			queue_delayed_work(system_power_efficient_wq,
 | 
						|
					   &info->hpdet_work,
 | 
						|
					   msecs_to_jiffies(HPDET_DEBOUNCE));
 | 
						|
		}
 | 
						|
 | 
						|
		regmap_update_bits(arizona->regmap,
 | 
						|
				   ARIZONA_JACK_DETECT_DEBOUNCE,
 | 
						|
				   ARIZONA_MICD_CLAMP_DB | ARIZONA_JD1_DB, 0);
 | 
						|
	} else {
 | 
						|
		dev_dbg(arizona->dev, "Detected jack removal\n");
 | 
						|
 | 
						|
		arizona_stop_mic(info);
 | 
						|
 | 
						|
		info->num_hpdet_res = 0;
 | 
						|
		for (i = 0; i < ARRAY_SIZE(info->hpdet_res); i++)
 | 
						|
			info->hpdet_res[i] = 0;
 | 
						|
		info->mic = false;
 | 
						|
		info->hpdet_done = false;
 | 
						|
		info->hpdet_retried = false;
 | 
						|
 | 
						|
		for (i = 0; i < info->num_micd_ranges; i++)
 | 
						|
			input_report_key(info->input,
 | 
						|
					 info->micd_ranges[i].key, 0);
 | 
						|
		input_sync(info->input);
 | 
						|
 | 
						|
		ret = extcon_update_state(&info->edev, 0xffffffff, 0);
 | 
						|
		if (ret != 0)
 | 
						|
			dev_err(arizona->dev, "Removal report failed: %d\n",
 | 
						|
				ret);
 | 
						|
 | 
						|
		regmap_update_bits(arizona->regmap,
 | 
						|
				   ARIZONA_JACK_DETECT_DEBOUNCE,
 | 
						|
				   ARIZONA_MICD_CLAMP_DB | ARIZONA_JD1_DB,
 | 
						|
				   ARIZONA_MICD_CLAMP_DB | ARIZONA_JD1_DB);
 | 
						|
	}
 | 
						|
 | 
						|
	if (arizona->pdata.micd_timeout)
 | 
						|
		info->micd_timeout = arizona->pdata.micd_timeout;
 | 
						|
	else
 | 
						|
		info->micd_timeout = DEFAULT_MICD_TIMEOUT;
 | 
						|
 | 
						|
out:
 | 
						|
	/* Clear trig_sts to make sure DCVDD is not forced up */
 | 
						|
	regmap_write(arizona->regmap, ARIZONA_AOD_WKUP_AND_TRIG,
 | 
						|
		     ARIZONA_MICD_CLAMP_FALL_TRIG_STS |
 | 
						|
		     ARIZONA_MICD_CLAMP_RISE_TRIG_STS |
 | 
						|
		     ARIZONA_JD1_FALL_TRIG_STS |
 | 
						|
		     ARIZONA_JD1_RISE_TRIG_STS);
 | 
						|
 | 
						|
	mutex_unlock(&info->lock);
 | 
						|
 | 
						|
	pm_runtime_mark_last_busy(info->dev);
 | 
						|
	pm_runtime_put_autosuspend(info->dev);
 | 
						|
 | 
						|
	return IRQ_HANDLED;
 | 
						|
}
 | 
						|
 | 
						|
/* Map a level onto a slot in the register bank */
 | 
						|
static void arizona_micd_set_level(struct arizona *arizona, int index,
 | 
						|
				   unsigned int level)
 | 
						|
{
 | 
						|
	int reg;
 | 
						|
	unsigned int mask;
 | 
						|
 | 
						|
	reg = ARIZONA_MIC_DETECT_LEVEL_4 - (index / 2);
 | 
						|
 | 
						|
	if (!(index % 2)) {
 | 
						|
		mask = 0x3f00;
 | 
						|
		level <<= 8;
 | 
						|
	} else {
 | 
						|
		mask = 0x3f;
 | 
						|
	}
 | 
						|
 | 
						|
	/* Program the level itself */
 | 
						|
	regmap_update_bits(arizona->regmap, reg, mask, level);
 | 
						|
}
 | 
						|
 | 
						|
static int arizona_extcon_probe(struct platform_device *pdev)
 | 
						|
{
 | 
						|
	struct arizona *arizona = dev_get_drvdata(pdev->dev.parent);
 | 
						|
	struct arizona_pdata *pdata = &arizona->pdata;
 | 
						|
	struct arizona_extcon_info *info;
 | 
						|
	unsigned int val;
 | 
						|
	int jack_irq_fall, jack_irq_rise;
 | 
						|
	int ret, mode, i, j;
 | 
						|
 | 
						|
	if (!arizona->dapm || !arizona->dapm->card)
 | 
						|
		return -EPROBE_DEFER;
 | 
						|
 | 
						|
	info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
 | 
						|
	if (!info) {
 | 
						|
		dev_err(&pdev->dev, "Failed to allocate memory\n");
 | 
						|
		ret = -ENOMEM;
 | 
						|
		goto err;
 | 
						|
	}
 | 
						|
 | 
						|
	info->micvdd = devm_regulator_get(arizona->dev, "MICVDD");
 | 
						|
	if (IS_ERR(info->micvdd)) {
 | 
						|
		ret = PTR_ERR(info->micvdd);
 | 
						|
		dev_err(arizona->dev, "Failed to get MICVDD: %d\n", ret);
 | 
						|
		goto err;
 | 
						|
	}
 | 
						|
 | 
						|
	mutex_init(&info->lock);
 | 
						|
	info->arizona = arizona;
 | 
						|
	info->dev = &pdev->dev;
 | 
						|
	info->last_jackdet = ~(ARIZONA_MICD_CLAMP_STS | ARIZONA_JD1_STS);
 | 
						|
	INIT_DELAYED_WORK(&info->hpdet_work, arizona_hpdet_work);
 | 
						|
	INIT_DELAYED_WORK(&info->micd_detect_work, arizona_micd_detect);
 | 
						|
	INIT_DELAYED_WORK(&info->micd_timeout_work, arizona_micd_timeout_work);
 | 
						|
	platform_set_drvdata(pdev, info);
 | 
						|
 | 
						|
	switch (arizona->type) {
 | 
						|
	case WM5102:
 | 
						|
		switch (arizona->rev) {
 | 
						|
		case 0:
 | 
						|
			info->micd_reva = true;
 | 
						|
			break;
 | 
						|
		default:
 | 
						|
			info->micd_clamp = true;
 | 
						|
			info->hpdet_ip = 1;
 | 
						|
			break;
 | 
						|
		}
 | 
						|
		break;
 | 
						|
	case WM5110:
 | 
						|
		switch (arizona->rev) {
 | 
						|
		case 0 ... 2:
 | 
						|
			break;
 | 
						|
		default:
 | 
						|
			info->micd_clamp = true;
 | 
						|
			info->hpdet_ip = 2;
 | 
						|
			break;
 | 
						|
		}
 | 
						|
		break;
 | 
						|
	default:
 | 
						|
		break;
 | 
						|
	}
 | 
						|
 | 
						|
	info->edev.name = "Headset Jack";
 | 
						|
	info->edev.dev.parent = arizona->dev;
 | 
						|
	info->edev.supported_cable = arizona_cable;
 | 
						|
 | 
						|
	ret = extcon_dev_register(&info->edev);
 | 
						|
	if (ret < 0) {
 | 
						|
		dev_err(arizona->dev, "extcon_dev_register() failed: %d\n",
 | 
						|
			ret);
 | 
						|
		goto err;
 | 
						|
	}
 | 
						|
 | 
						|
	info->input = devm_input_allocate_device(&pdev->dev);
 | 
						|
	if (!info->input) {
 | 
						|
		dev_err(arizona->dev, "Can't allocate input dev\n");
 | 
						|
		ret = -ENOMEM;
 | 
						|
		goto err_register;
 | 
						|
	}
 | 
						|
 | 
						|
	info->input->name = "Headset";
 | 
						|
	info->input->phys = "arizona/extcon";
 | 
						|
	info->input->dev.parent = &pdev->dev;
 | 
						|
 | 
						|
	if (pdata->num_micd_configs) {
 | 
						|
		info->micd_modes = pdata->micd_configs;
 | 
						|
		info->micd_num_modes = pdata->num_micd_configs;
 | 
						|
	} else {
 | 
						|
		info->micd_modes = micd_default_modes;
 | 
						|
		info->micd_num_modes = ARRAY_SIZE(micd_default_modes);
 | 
						|
	}
 | 
						|
 | 
						|
	if (arizona->pdata.micd_pol_gpio > 0) {
 | 
						|
		if (info->micd_modes[0].gpio)
 | 
						|
			mode = GPIOF_OUT_INIT_HIGH;
 | 
						|
		else
 | 
						|
			mode = GPIOF_OUT_INIT_LOW;
 | 
						|
 | 
						|
		ret = devm_gpio_request_one(&pdev->dev,
 | 
						|
					    arizona->pdata.micd_pol_gpio,
 | 
						|
					    mode,
 | 
						|
					    "MICD polarity");
 | 
						|
		if (ret != 0) {
 | 
						|
			dev_err(arizona->dev, "Failed to request GPIO%d: %d\n",
 | 
						|
				arizona->pdata.micd_pol_gpio, ret);
 | 
						|
			goto err_register;
 | 
						|
		}
 | 
						|
	}
 | 
						|
 | 
						|
	if (arizona->pdata.hpdet_id_gpio > 0) {
 | 
						|
		ret = devm_gpio_request_one(&pdev->dev,
 | 
						|
					    arizona->pdata.hpdet_id_gpio,
 | 
						|
					    GPIOF_OUT_INIT_LOW,
 | 
						|
					    "HPDET");
 | 
						|
		if (ret != 0) {
 | 
						|
			dev_err(arizona->dev, "Failed to request GPIO%d: %d\n",
 | 
						|
				arizona->pdata.hpdet_id_gpio, ret);
 | 
						|
			goto err_register;
 | 
						|
		}
 | 
						|
	}
 | 
						|
 | 
						|
	if (arizona->pdata.micd_bias_start_time)
 | 
						|
		regmap_update_bits(arizona->regmap, ARIZONA_MIC_DETECT_1,
 | 
						|
				   ARIZONA_MICD_BIAS_STARTTIME_MASK,
 | 
						|
				   arizona->pdata.micd_bias_start_time
 | 
						|
				   << ARIZONA_MICD_BIAS_STARTTIME_SHIFT);
 | 
						|
 | 
						|
	if (arizona->pdata.micd_rate)
 | 
						|
		regmap_update_bits(arizona->regmap, ARIZONA_MIC_DETECT_1,
 | 
						|
				   ARIZONA_MICD_RATE_MASK,
 | 
						|
				   arizona->pdata.micd_rate
 | 
						|
				   << ARIZONA_MICD_RATE_SHIFT);
 | 
						|
 | 
						|
	if (arizona->pdata.micd_dbtime)
 | 
						|
		regmap_update_bits(arizona->regmap, ARIZONA_MIC_DETECT_1,
 | 
						|
				   ARIZONA_MICD_DBTIME_MASK,
 | 
						|
				   arizona->pdata.micd_dbtime
 | 
						|
				   << ARIZONA_MICD_DBTIME_SHIFT);
 | 
						|
 | 
						|
	BUILD_BUG_ON(ARRAY_SIZE(arizona_micd_levels) != 0x40);
 | 
						|
 | 
						|
	if (arizona->pdata.num_micd_ranges) {
 | 
						|
		info->micd_ranges = pdata->micd_ranges;
 | 
						|
		info->num_micd_ranges = pdata->num_micd_ranges;
 | 
						|
	} else {
 | 
						|
		info->micd_ranges = micd_default_ranges;
 | 
						|
		info->num_micd_ranges = ARRAY_SIZE(micd_default_ranges);
 | 
						|
	}
 | 
						|
 | 
						|
	if (arizona->pdata.num_micd_ranges > ARIZONA_MAX_MICD_RANGE) {
 | 
						|
		dev_err(arizona->dev, "Too many MICD ranges: %d\n",
 | 
						|
			arizona->pdata.num_micd_ranges);
 | 
						|
	}
 | 
						|
 | 
						|
	if (info->num_micd_ranges > 1) {
 | 
						|
		for (i = 1; i < info->num_micd_ranges; i++) {
 | 
						|
			if (info->micd_ranges[i - 1].max >
 | 
						|
			    info->micd_ranges[i].max) {
 | 
						|
				dev_err(arizona->dev,
 | 
						|
					"MICD ranges must be sorted\n");
 | 
						|
				ret = -EINVAL;
 | 
						|
				goto err_input;
 | 
						|
			}
 | 
						|
		}
 | 
						|
	}
 | 
						|
 | 
						|
	/* Disable all buttons by default */
 | 
						|
	regmap_update_bits(arizona->regmap, ARIZONA_MIC_DETECT_2,
 | 
						|
			   ARIZONA_MICD_LVL_SEL_MASK, 0x81);
 | 
						|
 | 
						|
	/* Set up all the buttons the user specified */
 | 
						|
	for (i = 0; i < info->num_micd_ranges; i++) {
 | 
						|
		for (j = 0; j < ARRAY_SIZE(arizona_micd_levels); j++)
 | 
						|
			if (arizona_micd_levels[j] >= info->micd_ranges[i].max)
 | 
						|
				break;
 | 
						|
 | 
						|
		if (j == ARRAY_SIZE(arizona_micd_levels)) {
 | 
						|
			dev_err(arizona->dev, "Unsupported MICD level %d\n",
 | 
						|
				info->micd_ranges[i].max);
 | 
						|
			ret = -EINVAL;
 | 
						|
			goto err_input;
 | 
						|
		}
 | 
						|
 | 
						|
		dev_dbg(arizona->dev, "%d ohms for MICD threshold %d\n",
 | 
						|
			arizona_micd_levels[j], i);
 | 
						|
 | 
						|
		arizona_micd_set_level(arizona, i, j);
 | 
						|
		input_set_capability(info->input, EV_KEY,
 | 
						|
				     info->micd_ranges[i].key);
 | 
						|
 | 
						|
		/* Enable reporting of that range */
 | 
						|
		regmap_update_bits(arizona->regmap, ARIZONA_MIC_DETECT_2,
 | 
						|
				   1 << i, 1 << i);
 | 
						|
	}
 | 
						|
 | 
						|
	/* Set all the remaining keys to a maximum */
 | 
						|
	for (; i < ARIZONA_MAX_MICD_RANGE; i++)
 | 
						|
		arizona_micd_set_level(arizona, i, 0x3f);
 | 
						|
 | 
						|
	/*
 | 
						|
	 * If we have a clamp use it, activating in conjunction with
 | 
						|
	 * GPIO5 if that is connected for jack detect operation.
 | 
						|
	 */
 | 
						|
	if (info->micd_clamp) {
 | 
						|
		if (arizona->pdata.jd_gpio5) {
 | 
						|
			/* Put the GPIO into input mode with optional pull */
 | 
						|
			val = 0xc101;
 | 
						|
			if (arizona->pdata.jd_gpio5_nopull)
 | 
						|
				val &= ~ARIZONA_GPN_PU;
 | 
						|
 | 
						|
			regmap_write(arizona->regmap, ARIZONA_GPIO5_CTRL,
 | 
						|
				     val);
 | 
						|
 | 
						|
			regmap_update_bits(arizona->regmap,
 | 
						|
					   ARIZONA_MICD_CLAMP_CONTROL,
 | 
						|
					   ARIZONA_MICD_CLAMP_MODE_MASK, 0x9);
 | 
						|
		} else {
 | 
						|
			regmap_update_bits(arizona->regmap,
 | 
						|
					   ARIZONA_MICD_CLAMP_CONTROL,
 | 
						|
					   ARIZONA_MICD_CLAMP_MODE_MASK, 0x4);
 | 
						|
		}
 | 
						|
 | 
						|
		regmap_update_bits(arizona->regmap,
 | 
						|
				   ARIZONA_JACK_DETECT_DEBOUNCE,
 | 
						|
				   ARIZONA_MICD_CLAMP_DB,
 | 
						|
				   ARIZONA_MICD_CLAMP_DB);
 | 
						|
	}
 | 
						|
 | 
						|
	arizona_extcon_set_mode(info, 0);
 | 
						|
 | 
						|
	pm_runtime_enable(&pdev->dev);
 | 
						|
	pm_runtime_idle(&pdev->dev);
 | 
						|
	pm_runtime_get_sync(&pdev->dev);
 | 
						|
 | 
						|
	if (arizona->pdata.jd_gpio5) {
 | 
						|
		jack_irq_rise = ARIZONA_IRQ_MICD_CLAMP_RISE;
 | 
						|
		jack_irq_fall = ARIZONA_IRQ_MICD_CLAMP_FALL;
 | 
						|
	} else {
 | 
						|
		jack_irq_rise = ARIZONA_IRQ_JD_RISE;
 | 
						|
		jack_irq_fall = ARIZONA_IRQ_JD_FALL;
 | 
						|
	}
 | 
						|
 | 
						|
	ret = arizona_request_irq(arizona, jack_irq_rise,
 | 
						|
				  "JACKDET rise", arizona_jackdet, info);
 | 
						|
	if (ret != 0) {
 | 
						|
		dev_err(&pdev->dev, "Failed to get JACKDET rise IRQ: %d\n",
 | 
						|
			ret);
 | 
						|
		goto err_input;
 | 
						|
	}
 | 
						|
 | 
						|
	ret = arizona_set_irq_wake(arizona, jack_irq_rise, 1);
 | 
						|
	if (ret != 0) {
 | 
						|
		dev_err(&pdev->dev, "Failed to set JD rise IRQ wake: %d\n",
 | 
						|
			ret);
 | 
						|
		goto err_rise;
 | 
						|
	}
 | 
						|
 | 
						|
	ret = arizona_request_irq(arizona, jack_irq_fall,
 | 
						|
				  "JACKDET fall", arizona_jackdet, info);
 | 
						|
	if (ret != 0) {
 | 
						|
		dev_err(&pdev->dev, "Failed to get JD fall IRQ: %d\n", ret);
 | 
						|
		goto err_rise_wake;
 | 
						|
	}
 | 
						|
 | 
						|
	ret = arizona_set_irq_wake(arizona, jack_irq_fall, 1);
 | 
						|
	if (ret != 0) {
 | 
						|
		dev_err(&pdev->dev, "Failed to set JD fall IRQ wake: %d\n",
 | 
						|
			ret);
 | 
						|
		goto err_fall;
 | 
						|
	}
 | 
						|
 | 
						|
	ret = arizona_request_irq(arizona, ARIZONA_IRQ_MICDET,
 | 
						|
				  "MICDET", arizona_micdet, info);
 | 
						|
	if (ret != 0) {
 | 
						|
		dev_err(&pdev->dev, "Failed to get MICDET IRQ: %d\n", ret);
 | 
						|
		goto err_fall_wake;
 | 
						|
	}
 | 
						|
 | 
						|
	ret = arizona_request_irq(arizona, ARIZONA_IRQ_HPDET,
 | 
						|
				  "HPDET", arizona_hpdet_irq, info);
 | 
						|
	if (ret != 0) {
 | 
						|
		dev_err(&pdev->dev, "Failed to get HPDET IRQ: %d\n", ret);
 | 
						|
		goto err_micdet;
 | 
						|
	}
 | 
						|
 | 
						|
	arizona_clk32k_enable(arizona);
 | 
						|
	regmap_update_bits(arizona->regmap, ARIZONA_JACK_DETECT_DEBOUNCE,
 | 
						|
			   ARIZONA_JD1_DB, ARIZONA_JD1_DB);
 | 
						|
	regmap_update_bits(arizona->regmap, ARIZONA_JACK_DETECT_ANALOGUE,
 | 
						|
			   ARIZONA_JD1_ENA, ARIZONA_JD1_ENA);
 | 
						|
 | 
						|
	ret = regulator_allow_bypass(info->micvdd, true);
 | 
						|
	if (ret != 0)
 | 
						|
		dev_warn(arizona->dev, "Failed to set MICVDD to bypass: %d\n",
 | 
						|
			 ret);
 | 
						|
 | 
						|
	pm_runtime_put(&pdev->dev);
 | 
						|
 | 
						|
	ret = input_register_device(info->input);
 | 
						|
	if (ret) {
 | 
						|
		dev_err(&pdev->dev, "Can't register input device: %d\n", ret);
 | 
						|
		goto err_hpdet;
 | 
						|
	}
 | 
						|
 | 
						|
	return 0;
 | 
						|
 | 
						|
err_hpdet:
 | 
						|
	arizona_free_irq(arizona, ARIZONA_IRQ_HPDET, info);
 | 
						|
err_micdet:
 | 
						|
	arizona_free_irq(arizona, ARIZONA_IRQ_MICDET, info);
 | 
						|
err_fall_wake:
 | 
						|
	arizona_set_irq_wake(arizona, jack_irq_fall, 0);
 | 
						|
err_fall:
 | 
						|
	arizona_free_irq(arizona, jack_irq_fall, info);
 | 
						|
err_rise_wake:
 | 
						|
	arizona_set_irq_wake(arizona, jack_irq_rise, 0);
 | 
						|
err_rise:
 | 
						|
	arizona_free_irq(arizona, jack_irq_rise, info);
 | 
						|
err_input:
 | 
						|
err_register:
 | 
						|
	pm_runtime_disable(&pdev->dev);
 | 
						|
	extcon_dev_unregister(&info->edev);
 | 
						|
err:
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
 | 
						|
static int arizona_extcon_remove(struct platform_device *pdev)
 | 
						|
{
 | 
						|
	struct arizona_extcon_info *info = platform_get_drvdata(pdev);
 | 
						|
	struct arizona *arizona = info->arizona;
 | 
						|
	int jack_irq_rise, jack_irq_fall;
 | 
						|
 | 
						|
	pm_runtime_disable(&pdev->dev);
 | 
						|
 | 
						|
	regmap_update_bits(arizona->regmap,
 | 
						|
			   ARIZONA_MICD_CLAMP_CONTROL,
 | 
						|
			   ARIZONA_MICD_CLAMP_MODE_MASK, 0);
 | 
						|
 | 
						|
	if (arizona->pdata.jd_gpio5) {
 | 
						|
		jack_irq_rise = ARIZONA_IRQ_MICD_CLAMP_RISE;
 | 
						|
		jack_irq_fall = ARIZONA_IRQ_MICD_CLAMP_FALL;
 | 
						|
	} else {
 | 
						|
		jack_irq_rise = ARIZONA_IRQ_JD_RISE;
 | 
						|
		jack_irq_fall = ARIZONA_IRQ_JD_FALL;
 | 
						|
	}
 | 
						|
 | 
						|
	arizona_set_irq_wake(arizona, jack_irq_rise, 0);
 | 
						|
	arizona_set_irq_wake(arizona, jack_irq_fall, 0);
 | 
						|
	arizona_free_irq(arizona, ARIZONA_IRQ_HPDET, info);
 | 
						|
	arizona_free_irq(arizona, ARIZONA_IRQ_MICDET, info);
 | 
						|
	arizona_free_irq(arizona, jack_irq_rise, info);
 | 
						|
	arizona_free_irq(arizona, jack_irq_fall, info);
 | 
						|
	cancel_delayed_work_sync(&info->hpdet_work);
 | 
						|
	regmap_update_bits(arizona->regmap, ARIZONA_JACK_DETECT_ANALOGUE,
 | 
						|
			   ARIZONA_JD1_ENA, 0);
 | 
						|
	arizona_clk32k_disable(arizona);
 | 
						|
	extcon_dev_unregister(&info->edev);
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static struct platform_driver arizona_extcon_driver = {
 | 
						|
	.driver		= {
 | 
						|
		.name	= "arizona-extcon",
 | 
						|
		.owner	= THIS_MODULE,
 | 
						|
	},
 | 
						|
	.probe		= arizona_extcon_probe,
 | 
						|
	.remove		= arizona_extcon_remove,
 | 
						|
};
 | 
						|
 | 
						|
module_platform_driver(arizona_extcon_driver);
 | 
						|
 | 
						|
MODULE_DESCRIPTION("Arizona Extcon driver");
 | 
						|
MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
 | 
						|
MODULE_LICENSE("GPL");
 | 
						|
MODULE_ALIAS("platform:extcon-arizona");
 |