 2dc1158137
			
		
	
	
	2dc1158137
	
	
	
		
			
			of_device is just an alias for platform_device, so remove it entirely. Also replace to_of_device() with to_platform_device() and update comment blocks. This patch was initially generated from the following semantic patch, and then edited by hand to pick up the bits that coccinelle didn't catch. @@ @@ -struct of_device +struct platform_device Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Reviewed-by: David S. Miller <davem@davemloft.net>
		
			
				
	
	
		
			237 lines
		
	
	
	
		
			6.2 KiB
			
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			237 lines
		
	
	
	
		
			6.2 KiB
			
		
	
	
	
		
			C
		
	
	
	
	
	
| /*
 | |
|  * Driver for SJA1000 CAN controllers on the OpenFirmware platform bus
 | |
|  *
 | |
|  * Copyright (C) 2008-2009 Wolfgang Grandegger <wg@grandegger.com>
 | |
|  *
 | |
|  * This program is free software; you can redistribute it and/or modify
 | |
|  * it under the terms of the version 2 of the GNU General Public License
 | |
|  * as published by the Free Software Foundation
 | |
|  *
 | |
|  * This program is distributed in the hope that it will be useful,
 | |
|  * but WITHOUT ANY WARRANTY; without even the implied warranty of
 | |
|  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
 | |
|  * GNU General Public License for more details.
 | |
|  *
 | |
|  * You should have received a copy of the GNU General Public License
 | |
|  * along with this program; if not, write to the Free Software Foundation,
 | |
|  * Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
 | |
|  */
 | |
| 
 | |
| /* This is a generic driver for SJA1000 chips on the OpenFirmware platform
 | |
|  * bus found on embedded PowerPC systems. You need a SJA1000 CAN node
 | |
|  * definition in your flattened device tree source (DTS) file similar to:
 | |
|  *
 | |
|  *   can@3,100 {
 | |
|  *           compatible = "nxp,sja1000";
 | |
|  *           reg = <3 0x100 0x80>;
 | |
|  *           interrupts = <2 0>;
 | |
|  *           interrupt-parent = <&mpic>;
 | |
|  *           nxp,external-clock-frequency = <16000000>;
 | |
|  *   };
 | |
|  *
 | |
|  * See "Documentation/powerpc/dts-bindings/can/sja1000.txt" for further
 | |
|  * information.
 | |
|  */
 | |
| 
 | |
| #include <linux/kernel.h>
 | |
| #include <linux/module.h>
 | |
| #include <linux/interrupt.h>
 | |
| #include <linux/netdevice.h>
 | |
| #include <linux/delay.h>
 | |
| #include <linux/can/dev.h>
 | |
| 
 | |
| #include <linux/of_platform.h>
 | |
| #include <asm/prom.h>
 | |
| 
 | |
| #include "sja1000.h"
 | |
| 
 | |
| #define DRV_NAME "sja1000_of_platform"
 | |
| 
 | |
| MODULE_AUTHOR("Wolfgang Grandegger <wg@grandegger.com>");
 | |
| MODULE_DESCRIPTION("Socket-CAN driver for SJA1000 on the OF platform bus");
 | |
| MODULE_LICENSE("GPL v2");
 | |
| 
 | |
| #define SJA1000_OFP_CAN_CLOCK  (16000000 / 2)
 | |
| 
 | |
| #define SJA1000_OFP_OCR        OCR_TX0_PULLDOWN
 | |
| #define SJA1000_OFP_CDR        (CDR_CBP | CDR_CLK_OFF)
 | |
| 
 | |
| static u8 sja1000_ofp_read_reg(const struct sja1000_priv *priv, int reg)
 | |
| {
 | |
| 	return in_8(priv->reg_base + reg);
 | |
| }
 | |
| 
 | |
| static void sja1000_ofp_write_reg(const struct sja1000_priv *priv,
 | |
| 				  int reg, u8 val)
 | |
| {
 | |
| 	out_8(priv->reg_base + reg, val);
 | |
| }
 | |
| 
 | |
| static int __devexit sja1000_ofp_remove(struct platform_device *ofdev)
 | |
| {
 | |
| 	struct net_device *dev = dev_get_drvdata(&ofdev->dev);
 | |
| 	struct sja1000_priv *priv = netdev_priv(dev);
 | |
| 	struct device_node *np = ofdev->dev.of_node;
 | |
| 	struct resource res;
 | |
| 
 | |
| 	dev_set_drvdata(&ofdev->dev, NULL);
 | |
| 
 | |
| 	unregister_sja1000dev(dev);
 | |
| 	free_sja1000dev(dev);
 | |
| 	iounmap(priv->reg_base);
 | |
| 	irq_dispose_mapping(dev->irq);
 | |
| 
 | |
| 	of_address_to_resource(np, 0, &res);
 | |
| 	release_mem_region(res.start, resource_size(&res));
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int __devinit sja1000_ofp_probe(struct platform_device *ofdev,
 | |
| 				       const struct of_device_id *id)
 | |
| {
 | |
| 	struct device_node *np = ofdev->dev.of_node;
 | |
| 	struct net_device *dev;
 | |
| 	struct sja1000_priv *priv;
 | |
| 	struct resource res;
 | |
| 	const u32 *prop;
 | |
| 	int err, irq, res_size, prop_size;
 | |
| 	void __iomem *base;
 | |
| 
 | |
| 	err = of_address_to_resource(np, 0, &res);
 | |
| 	if (err) {
 | |
| 		dev_err(&ofdev->dev, "invalid address\n");
 | |
| 		return err;
 | |
| 	}
 | |
| 
 | |
| 	res_size = resource_size(&res);
 | |
| 
 | |
| 	if (!request_mem_region(res.start, res_size, DRV_NAME)) {
 | |
| 		dev_err(&ofdev->dev, "couldn't request %#llx..%#llx\n",
 | |
| 			(unsigned long long)res.start,
 | |
| 			(unsigned long long)res.end);
 | |
| 		return -EBUSY;
 | |
| 	}
 | |
| 
 | |
| 	base = ioremap_nocache(res.start, res_size);
 | |
| 	if (!base) {
 | |
| 		dev_err(&ofdev->dev, "couldn't ioremap %#llx..%#llx\n",
 | |
| 			(unsigned long long)res.start,
 | |
| 			(unsigned long long)res.end);
 | |
| 		err = -ENOMEM;
 | |
| 		goto exit_release_mem;
 | |
| 	}
 | |
| 
 | |
| 	irq = irq_of_parse_and_map(np, 0);
 | |
| 	if (irq == NO_IRQ) {
 | |
| 		dev_err(&ofdev->dev, "no irq found\n");
 | |
| 		err = -ENODEV;
 | |
| 		goto exit_unmap_mem;
 | |
| 	}
 | |
| 
 | |
| 	dev = alloc_sja1000dev(0);
 | |
| 	if (!dev) {
 | |
| 		err = -ENOMEM;
 | |
| 		goto exit_dispose_irq;
 | |
| 	}
 | |
| 
 | |
| 	priv = netdev_priv(dev);
 | |
| 
 | |
| 	priv->read_reg = sja1000_ofp_read_reg;
 | |
| 	priv->write_reg = sja1000_ofp_write_reg;
 | |
| 
 | |
| 	prop = of_get_property(np, "nxp,external-clock-frequency", &prop_size);
 | |
| 	if (prop && (prop_size ==  sizeof(u32)))
 | |
| 		priv->can.clock.freq = *prop / 2;
 | |
| 	else
 | |
| 		priv->can.clock.freq = SJA1000_OFP_CAN_CLOCK; /* default */
 | |
| 
 | |
| 	prop = of_get_property(np, "nxp,tx-output-mode", &prop_size);
 | |
| 	if (prop && (prop_size == sizeof(u32)))
 | |
| 		priv->ocr |= *prop & OCR_MODE_MASK;
 | |
| 	else
 | |
| 		priv->ocr |= OCR_MODE_NORMAL; /* default */
 | |
| 
 | |
| 	prop = of_get_property(np, "nxp,tx-output-config", &prop_size);
 | |
| 	if (prop && (prop_size == sizeof(u32)))
 | |
| 		priv->ocr |= (*prop << OCR_TX_SHIFT) & OCR_TX_MASK;
 | |
| 	else
 | |
| 		priv->ocr |= OCR_TX0_PULLDOWN; /* default */
 | |
| 
 | |
| 	prop = of_get_property(np, "nxp,clock-out-frequency", &prop_size);
 | |
| 	if (prop && (prop_size == sizeof(u32)) && *prop) {
 | |
| 		u32 divider = priv->can.clock.freq * 2 / *prop;
 | |
| 
 | |
| 		if (divider > 1)
 | |
| 			priv->cdr |= divider / 2 - 1;
 | |
| 		else
 | |
| 			priv->cdr |= CDR_CLKOUT_MASK;
 | |
| 	} else {
 | |
| 		priv->cdr |= CDR_CLK_OFF; /* default */
 | |
| 	}
 | |
| 
 | |
| 	prop = of_get_property(np, "nxp,no-comparator-bypass", NULL);
 | |
| 	if (!prop)
 | |
| 		priv->cdr |= CDR_CBP; /* default */
 | |
| 
 | |
| 	priv->irq_flags = IRQF_SHARED;
 | |
| 	priv->reg_base = base;
 | |
| 
 | |
| 	dev->irq = irq;
 | |
| 
 | |
| 	dev_info(&ofdev->dev,
 | |
| 		 "reg_base=0x%p irq=%d clock=%d ocr=0x%02x cdr=0x%02x\n",
 | |
| 		 priv->reg_base, dev->irq, priv->can.clock.freq,
 | |
| 		 priv->ocr, priv->cdr);
 | |
| 
 | |
| 	dev_set_drvdata(&ofdev->dev, dev);
 | |
| 	SET_NETDEV_DEV(dev, &ofdev->dev);
 | |
| 
 | |
| 	err = register_sja1000dev(dev);
 | |
| 	if (err) {
 | |
| 		dev_err(&ofdev->dev, "registering %s failed (err=%d)\n",
 | |
| 			DRV_NAME, err);
 | |
| 		goto exit_free_sja1000;
 | |
| 	}
 | |
| 
 | |
| 	return 0;
 | |
| 
 | |
| exit_free_sja1000:
 | |
| 	free_sja1000dev(dev);
 | |
| exit_dispose_irq:
 | |
| 	irq_dispose_mapping(irq);
 | |
| exit_unmap_mem:
 | |
| 	iounmap(base);
 | |
| exit_release_mem:
 | |
| 	release_mem_region(res.start, res_size);
 | |
| 
 | |
| 	return err;
 | |
| }
 | |
| 
 | |
| static struct of_device_id __devinitdata sja1000_ofp_table[] = {
 | |
| 	{.compatible = "nxp,sja1000"},
 | |
| 	{},
 | |
| };
 | |
| MODULE_DEVICE_TABLE(of, sja1000_ofp_table);
 | |
| 
 | |
| static struct of_platform_driver sja1000_ofp_driver = {
 | |
| 	.driver = {
 | |
| 		.owner = THIS_MODULE,
 | |
| 		.name = DRV_NAME,
 | |
| 		.of_match_table = sja1000_ofp_table,
 | |
| 	},
 | |
| 	.probe = sja1000_ofp_probe,
 | |
| 	.remove = __devexit_p(sja1000_ofp_remove),
 | |
| };
 | |
| 
 | |
| static int __init sja1000_ofp_init(void)
 | |
| {
 | |
| 	return of_register_platform_driver(&sja1000_ofp_driver);
 | |
| }
 | |
| module_init(sja1000_ofp_init);
 | |
| 
 | |
| static void __exit sja1000_ofp_exit(void)
 | |
| {
 | |
| 	return of_unregister_platform_driver(&sja1000_ofp_driver);
 | |
| };
 | |
| module_exit(sja1000_ofp_exit);
 |