d9f66c1a46
This fixes a regression introduced in
3b57ca0f80.
The data[6] byte contains either 1 or -1 depending on the whether the
mouse wheel on older wacom tablets is moved down (1) or up (-1). The
patch introduced in the above commit changed the cast from (signed char)
to (signed). When cast as a signed integer and negated, the value of -1
(stored in the byte as 0xff) became -255 rather than 1. This patch
reverts the cast to a (signed char) and also removes an unnecessary
(signed) cast, as all the values operated on are bitmasked.
Signed-off-by: Mike Auty <ikelos@gentoo.org>
Reviewed-by: Ping Cheng <pingc@wacom.com>
Cc; stable@kernel.org
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
1291 lines
45 KiB
C
1291 lines
45 KiB
C
/*
|
|
* drivers/input/tablet/wacom_wac.c
|
|
*
|
|
* USB Wacom tablet support - Wacom specific code
|
|
*
|
|
*/
|
|
|
|
/*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*/
|
|
|
|
#include "wacom_wac.h"
|
|
#include "wacom.h"
|
|
|
|
static int wacom_penpartner_irq(struct wacom_wac *wacom)
|
|
{
|
|
unsigned char *data = wacom->data;
|
|
struct input_dev *input = wacom->input;
|
|
|
|
switch (data[0]) {
|
|
case 1:
|
|
if (data[5] & 0x80) {
|
|
wacom->tool[0] = (data[5] & 0x20) ? BTN_TOOL_RUBBER : BTN_TOOL_PEN;
|
|
wacom->id[0] = (data[5] & 0x20) ? ERASER_DEVICE_ID : STYLUS_DEVICE_ID;
|
|
input_report_key(input, wacom->tool[0], 1);
|
|
input_report_abs(input, ABS_MISC, wacom->id[0]); /* report tool id */
|
|
input_report_abs(input, ABS_X, get_unaligned_le16(&data[1]));
|
|
input_report_abs(input, ABS_Y, get_unaligned_le16(&data[3]));
|
|
input_report_abs(input, ABS_PRESSURE, (signed char)data[6] + 127);
|
|
input_report_key(input, BTN_TOUCH, ((signed char)data[6] > -127));
|
|
input_report_key(input, BTN_STYLUS, (data[5] & 0x40));
|
|
} else {
|
|
input_report_key(input, wacom->tool[0], 0);
|
|
input_report_abs(input, ABS_MISC, 0); /* report tool id */
|
|
input_report_abs(input, ABS_PRESSURE, -1);
|
|
input_report_key(input, BTN_TOUCH, 0);
|
|
}
|
|
break;
|
|
|
|
case 2:
|
|
input_report_key(input, BTN_TOOL_PEN, 1);
|
|
input_report_abs(input, ABS_MISC, STYLUS_DEVICE_ID); /* report tool id */
|
|
input_report_abs(input, ABS_X, get_unaligned_le16(&data[1]));
|
|
input_report_abs(input, ABS_Y, get_unaligned_le16(&data[3]));
|
|
input_report_abs(input, ABS_PRESSURE, (signed char)data[6] + 127);
|
|
input_report_key(input, BTN_TOUCH, ((signed char)data[6] > -80) && !(data[5] & 0x20));
|
|
input_report_key(input, BTN_STYLUS, (data[5] & 0x40));
|
|
break;
|
|
|
|
default:
|
|
printk(KERN_INFO "wacom_penpartner_irq: received unknown report #%d\n", data[0]);
|
|
return 0;
|
|
}
|
|
|
|
return 1;
|
|
}
|
|
|
|
static int wacom_pl_irq(struct wacom_wac *wacom)
|
|
{
|
|
struct wacom_features *features = &wacom->features;
|
|
unsigned char *data = wacom->data;
|
|
struct input_dev *input = wacom->input;
|
|
int prox, pressure;
|
|
|
|
if (data[0] != WACOM_REPORT_PENABLED) {
|
|
dbg("wacom_pl_irq: received unknown report #%d", data[0]);
|
|
return 0;
|
|
}
|
|
|
|
prox = data[1] & 0x40;
|
|
|
|
if (prox) {
|
|
wacom->id[0] = ERASER_DEVICE_ID;
|
|
pressure = (signed char)((data[7] << 1) | ((data[4] >> 2) & 1));
|
|
if (features->pressure_max > 255)
|
|
pressure = (pressure << 1) | ((data[4] >> 6) & 1);
|
|
pressure += (features->pressure_max + 1) / 2;
|
|
|
|
/*
|
|
* if going from out of proximity into proximity select between the eraser
|
|
* and the pen based on the state of the stylus2 button, choose eraser if
|
|
* pressed else choose pen. if not a proximity change from out to in, send
|
|
* an out of proximity for previous tool then a in for new tool.
|
|
*/
|
|
if (!wacom->tool[0]) {
|
|
/* Eraser bit set for DTF */
|
|
if (data[1] & 0x10)
|
|
wacom->tool[1] = BTN_TOOL_RUBBER;
|
|
else
|
|
/* Going into proximity select tool */
|
|
wacom->tool[1] = (data[4] & 0x20) ? BTN_TOOL_RUBBER : BTN_TOOL_PEN;
|
|
} else {
|
|
/* was entered with stylus2 pressed */
|
|
if (wacom->tool[1] == BTN_TOOL_RUBBER && !(data[4] & 0x20)) {
|
|
/* report out proximity for previous tool */
|
|
input_report_key(input, wacom->tool[1], 0);
|
|
input_sync(input);
|
|
wacom->tool[1] = BTN_TOOL_PEN;
|
|
return 0;
|
|
}
|
|
}
|
|
if (wacom->tool[1] != BTN_TOOL_RUBBER) {
|
|
/* Unknown tool selected default to pen tool */
|
|
wacom->tool[1] = BTN_TOOL_PEN;
|
|
wacom->id[0] = STYLUS_DEVICE_ID;
|
|
}
|
|
input_report_key(input, wacom->tool[1], prox); /* report in proximity for tool */
|
|
input_report_abs(input, ABS_MISC, wacom->id[0]); /* report tool id */
|
|
input_report_abs(input, ABS_X, data[3] | (data[2] << 7) | ((data[1] & 0x03) << 14));
|
|
input_report_abs(input, ABS_Y, data[6] | (data[5] << 7) | ((data[4] & 0x03) << 14));
|
|
input_report_abs(input, ABS_PRESSURE, pressure);
|
|
|
|
input_report_key(input, BTN_TOUCH, data[4] & 0x08);
|
|
input_report_key(input, BTN_STYLUS, data[4] & 0x10);
|
|
/* Only allow the stylus2 button to be reported for the pen tool. */
|
|
input_report_key(input, BTN_STYLUS2, (wacom->tool[1] == BTN_TOOL_PEN) && (data[4] & 0x20));
|
|
} else {
|
|
/* report proximity-out of a (valid) tool */
|
|
if (wacom->tool[1] != BTN_TOOL_RUBBER) {
|
|
/* Unknown tool selected default to pen tool */
|
|
wacom->tool[1] = BTN_TOOL_PEN;
|
|
}
|
|
input_report_key(input, wacom->tool[1], prox);
|
|
}
|
|
|
|
wacom->tool[0] = prox; /* Save proximity state */
|
|
return 1;
|
|
}
|
|
|
|
static int wacom_ptu_irq(struct wacom_wac *wacom)
|
|
{
|
|
unsigned char *data = wacom->data;
|
|
struct input_dev *input = wacom->input;
|
|
|
|
if (data[0] != WACOM_REPORT_PENABLED) {
|
|
printk(KERN_INFO "wacom_ptu_irq: received unknown report #%d\n", data[0]);
|
|
return 0;
|
|
}
|
|
|
|
if (data[1] & 0x04) {
|
|
input_report_key(input, BTN_TOOL_RUBBER, data[1] & 0x20);
|
|
input_report_key(input, BTN_TOUCH, data[1] & 0x08);
|
|
wacom->id[0] = ERASER_DEVICE_ID;
|
|
} else {
|
|
input_report_key(input, BTN_TOOL_PEN, data[1] & 0x20);
|
|
input_report_key(input, BTN_TOUCH, data[1] & 0x01);
|
|
wacom->id[0] = STYLUS_DEVICE_ID;
|
|
}
|
|
input_report_abs(input, ABS_MISC, wacom->id[0]); /* report tool id */
|
|
input_report_abs(input, ABS_X, le16_to_cpup((__le16 *)&data[2]));
|
|
input_report_abs(input, ABS_Y, le16_to_cpup((__le16 *)&data[4]));
|
|
input_report_abs(input, ABS_PRESSURE, le16_to_cpup((__le16 *)&data[6]));
|
|
input_report_key(input, BTN_STYLUS, data[1] & 0x02);
|
|
input_report_key(input, BTN_STYLUS2, data[1] & 0x10);
|
|
return 1;
|
|
}
|
|
|
|
static int wacom_dtu_irq(struct wacom_wac *wacom)
|
|
{
|
|
struct wacom_features *features = &wacom->features;
|
|
char *data = wacom->data;
|
|
struct input_dev *input = wacom->input;
|
|
int prox = data[1] & 0x20, pressure;
|
|
|
|
dbg("wacom_dtu_irq: received report #%d", data[0]);
|
|
|
|
if (prox) {
|
|
/* Going into proximity select tool */
|
|
wacom->tool[0] = (data[1] & 0x0c) ? BTN_TOOL_RUBBER : BTN_TOOL_PEN;
|
|
if (wacom->tool[0] == BTN_TOOL_PEN)
|
|
wacom->id[0] = STYLUS_DEVICE_ID;
|
|
else
|
|
wacom->id[0] = ERASER_DEVICE_ID;
|
|
}
|
|
input_report_key(input, BTN_STYLUS, data[1] & 0x02);
|
|
input_report_key(input, BTN_STYLUS2, data[1] & 0x10);
|
|
input_report_abs(input, ABS_X, le16_to_cpup((__le16 *)&data[2]));
|
|
input_report_abs(input, ABS_Y, le16_to_cpup((__le16 *)&data[4]));
|
|
pressure = ((data[7] & 0x01) << 8) | data[6];
|
|
if (pressure < 0)
|
|
pressure = features->pressure_max + pressure + 1;
|
|
input_report_abs(input, ABS_PRESSURE, pressure);
|
|
input_report_key(input, BTN_TOUCH, data[1] & 0x05);
|
|
if (!prox) /* out-prox */
|
|
wacom->id[0] = 0;
|
|
input_report_key(input, wacom->tool[0], prox);
|
|
input_report_abs(input, ABS_MISC, wacom->id[0]);
|
|
return 1;
|
|
}
|
|
|
|
static int wacom_graphire_irq(struct wacom_wac *wacom)
|
|
{
|
|
struct wacom_features *features = &wacom->features;
|
|
unsigned char *data = wacom->data;
|
|
struct input_dev *input = wacom->input;
|
|
int prox;
|
|
int rw = 0;
|
|
int retval = 0;
|
|
|
|
if (data[0] != WACOM_REPORT_PENABLED) {
|
|
dbg("wacom_graphire_irq: received unknown report #%d", data[0]);
|
|
goto exit;
|
|
}
|
|
|
|
prox = data[1] & 0x80;
|
|
if (prox || wacom->id[0]) {
|
|
if (prox) {
|
|
switch ((data[1] >> 5) & 3) {
|
|
|
|
case 0: /* Pen */
|
|
wacom->tool[0] = BTN_TOOL_PEN;
|
|
wacom->id[0] = STYLUS_DEVICE_ID;
|
|
break;
|
|
|
|
case 1: /* Rubber */
|
|
wacom->tool[0] = BTN_TOOL_RUBBER;
|
|
wacom->id[0] = ERASER_DEVICE_ID;
|
|
break;
|
|
|
|
case 2: /* Mouse with wheel */
|
|
input_report_key(input, BTN_MIDDLE, data[1] & 0x04);
|
|
/* fall through */
|
|
|
|
case 3: /* Mouse without wheel */
|
|
wacom->tool[0] = BTN_TOOL_MOUSE;
|
|
wacom->id[0] = CURSOR_DEVICE_ID;
|
|
break;
|
|
}
|
|
}
|
|
input_report_abs(input, ABS_X, le16_to_cpup((__le16 *)&data[2]));
|
|
input_report_abs(input, ABS_Y, le16_to_cpup((__le16 *)&data[4]));
|
|
if (wacom->tool[0] != BTN_TOOL_MOUSE) {
|
|
input_report_abs(input, ABS_PRESSURE, data[6] | ((data[7] & 0x01) << 8));
|
|
input_report_key(input, BTN_TOUCH, data[1] & 0x01);
|
|
input_report_key(input, BTN_STYLUS, data[1] & 0x02);
|
|
input_report_key(input, BTN_STYLUS2, data[1] & 0x04);
|
|
} else {
|
|
input_report_key(input, BTN_LEFT, data[1] & 0x01);
|
|
input_report_key(input, BTN_RIGHT, data[1] & 0x02);
|
|
if (features->type == WACOM_G4 ||
|
|
features->type == WACOM_MO) {
|
|
input_report_abs(input, ABS_DISTANCE, data[6] & 0x3f);
|
|
rw = (data[7] & 0x04) - (data[7] & 0x03);
|
|
} else {
|
|
input_report_abs(input, ABS_DISTANCE, data[7] & 0x3f);
|
|
rw = -(signed char)data[6];
|
|
}
|
|
input_report_rel(input, REL_WHEEL, rw);
|
|
}
|
|
|
|
if (!prox)
|
|
wacom->id[0] = 0;
|
|
input_report_abs(input, ABS_MISC, wacom->id[0]); /* report tool id */
|
|
input_report_key(input, wacom->tool[0], prox);
|
|
input_sync(input); /* sync last event */
|
|
}
|
|
|
|
/* send pad data */
|
|
switch (features->type) {
|
|
case WACOM_G4:
|
|
prox = data[7] & 0xf8;
|
|
if (prox || wacom->id[1]) {
|
|
wacom->id[1] = PAD_DEVICE_ID;
|
|
input_report_key(input, BTN_0, (data[7] & 0x40));
|
|
input_report_key(input, BTN_4, (data[7] & 0x80));
|
|
rw = ((data[7] & 0x18) >> 3) - ((data[7] & 0x20) >> 3);
|
|
input_report_rel(input, REL_WHEEL, rw);
|
|
input_report_key(input, BTN_TOOL_FINGER, 0xf0);
|
|
if (!prox)
|
|
wacom->id[1] = 0;
|
|
input_report_abs(input, ABS_MISC, wacom->id[1]);
|
|
input_event(input, EV_MSC, MSC_SERIAL, 0xf0);
|
|
retval = 1;
|
|
}
|
|
break;
|
|
|
|
case WACOM_MO:
|
|
prox = (data[7] & 0xf8) || data[8];
|
|
if (prox || wacom->id[1]) {
|
|
wacom->id[1] = PAD_DEVICE_ID;
|
|
input_report_key(input, BTN_0, (data[7] & 0x08));
|
|
input_report_key(input, BTN_1, (data[7] & 0x20));
|
|
input_report_key(input, BTN_4, (data[7] & 0x10));
|
|
input_report_key(input, BTN_5, (data[7] & 0x40));
|
|
input_report_abs(input, ABS_WHEEL, (data[8] & 0x7f));
|
|
input_report_key(input, BTN_TOOL_FINGER, 0xf0);
|
|
if (!prox)
|
|
wacom->id[1] = 0;
|
|
input_report_abs(input, ABS_MISC, wacom->id[1]);
|
|
input_event(input, EV_MSC, MSC_SERIAL, 0xf0);
|
|
}
|
|
retval = 1;
|
|
break;
|
|
}
|
|
exit:
|
|
return retval;
|
|
}
|
|
|
|
static int wacom_intuos_inout(struct wacom_wac *wacom)
|
|
{
|
|
struct wacom_features *features = &wacom->features;
|
|
unsigned char *data = wacom->data;
|
|
struct input_dev *input = wacom->input;
|
|
int idx = 0;
|
|
|
|
/* tool number */
|
|
if (features->type == INTUOS)
|
|
idx = data[1] & 0x01;
|
|
|
|
/* Enter report */
|
|
if ((data[1] & 0xfc) == 0xc0) {
|
|
/* serial number of the tool */
|
|
wacom->serial[idx] = ((data[3] & 0x0f) << 28) +
|
|
(data[4] << 20) + (data[5] << 12) +
|
|
(data[6] << 4) + (data[7] >> 4);
|
|
|
|
wacom->id[idx] = (data[2] << 4) | (data[3] >> 4) |
|
|
((data[7] & 0x0f) << 20) | ((data[8] & 0xf0) << 12);
|
|
|
|
switch (wacom->id[idx] & 0xfffff) {
|
|
case 0x812: /* Inking pen */
|
|
case 0x801: /* Intuos3 Inking pen */
|
|
case 0x20802: /* Intuos4 Inking Pen */
|
|
case 0x012:
|
|
wacom->tool[idx] = BTN_TOOL_PENCIL;
|
|
break;
|
|
|
|
case 0x822: /* Pen */
|
|
case 0x842:
|
|
case 0x852:
|
|
case 0x823: /* Intuos3 Grip Pen */
|
|
case 0x813: /* Intuos3 Classic Pen */
|
|
case 0x885: /* Intuos3 Marker Pen */
|
|
case 0x802: /* Intuos4 General Pen */
|
|
case 0x804: /* Intuos4 Marker Pen */
|
|
case 0x40802: /* Intuos4 Classic Pen */
|
|
case 0x022:
|
|
wacom->tool[idx] = BTN_TOOL_PEN;
|
|
break;
|
|
|
|
case 0x832: /* Stroke pen */
|
|
case 0x032:
|
|
wacom->tool[idx] = BTN_TOOL_BRUSH;
|
|
break;
|
|
|
|
case 0x007: /* Mouse 4D and 2D */
|
|
case 0x09c:
|
|
case 0x094:
|
|
case 0x017: /* Intuos3 2D Mouse */
|
|
case 0x806: /* Intuos4 Mouse */
|
|
wacom->tool[idx] = BTN_TOOL_MOUSE;
|
|
break;
|
|
|
|
case 0x096: /* Lens cursor */
|
|
case 0x097: /* Intuos3 Lens cursor */
|
|
case 0x006: /* Intuos4 Lens cursor */
|
|
wacom->tool[idx] = BTN_TOOL_LENS;
|
|
break;
|
|
|
|
case 0x82a: /* Eraser */
|
|
case 0x85a:
|
|
case 0x91a:
|
|
case 0xd1a:
|
|
case 0x0fa:
|
|
case 0x82b: /* Intuos3 Grip Pen Eraser */
|
|
case 0x81b: /* Intuos3 Classic Pen Eraser */
|
|
case 0x91b: /* Intuos3 Airbrush Eraser */
|
|
case 0x80c: /* Intuos4 Marker Pen Eraser */
|
|
case 0x80a: /* Intuos4 General Pen Eraser */
|
|
case 0x4080a: /* Intuos4 Classic Pen Eraser */
|
|
case 0x90a: /* Intuos4 Airbrush Eraser */
|
|
wacom->tool[idx] = BTN_TOOL_RUBBER;
|
|
break;
|
|
|
|
case 0xd12:
|
|
case 0x912:
|
|
case 0x112:
|
|
case 0x913: /* Intuos3 Airbrush */
|
|
case 0x902: /* Intuos4 Airbrush */
|
|
wacom->tool[idx] = BTN_TOOL_AIRBRUSH;
|
|
break;
|
|
|
|
default: /* Unknown tool */
|
|
wacom->tool[idx] = BTN_TOOL_PEN;
|
|
break;
|
|
}
|
|
return 1;
|
|
}
|
|
|
|
/* older I4 styli don't work with new Cintiqs */
|
|
if (!((wacom->id[idx] >> 20) & 0x01) &&
|
|
(features->type == WACOM_21UX2))
|
|
return 1;
|
|
|
|
/* Exit report */
|
|
if ((data[1] & 0xfe) == 0x80) {
|
|
/*
|
|
* Reset all states otherwise we lose the initial states
|
|
* when in-prox next time
|
|
*/
|
|
input_report_abs(input, ABS_X, 0);
|
|
input_report_abs(input, ABS_Y, 0);
|
|
input_report_abs(input, ABS_DISTANCE, 0);
|
|
input_report_abs(input, ABS_TILT_X, 0);
|
|
input_report_abs(input, ABS_TILT_Y, 0);
|
|
if (wacom->tool[idx] >= BTN_TOOL_MOUSE) {
|
|
input_report_key(input, BTN_LEFT, 0);
|
|
input_report_key(input, BTN_MIDDLE, 0);
|
|
input_report_key(input, BTN_RIGHT, 0);
|
|
input_report_key(input, BTN_SIDE, 0);
|
|
input_report_key(input, BTN_EXTRA, 0);
|
|
input_report_abs(input, ABS_THROTTLE, 0);
|
|
input_report_abs(input, ABS_RZ, 0);
|
|
} else {
|
|
input_report_abs(input, ABS_PRESSURE, 0);
|
|
input_report_key(input, BTN_STYLUS, 0);
|
|
input_report_key(input, BTN_STYLUS2, 0);
|
|
input_report_key(input, BTN_TOUCH, 0);
|
|
input_report_abs(input, ABS_WHEEL, 0);
|
|
if (features->type >= INTUOS3S)
|
|
input_report_abs(input, ABS_Z, 0);
|
|
}
|
|
input_report_key(input, wacom->tool[idx], 0);
|
|
input_report_abs(input, ABS_MISC, 0); /* reset tool id */
|
|
input_event(input, EV_MSC, MSC_SERIAL, wacom->serial[idx]);
|
|
wacom->id[idx] = 0;
|
|
return 2;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static void wacom_intuos_general(struct wacom_wac *wacom)
|
|
{
|
|
struct wacom_features *features = &wacom->features;
|
|
unsigned char *data = wacom->data;
|
|
struct input_dev *input = wacom->input;
|
|
unsigned int t;
|
|
|
|
/* general pen packet */
|
|
if ((data[1] & 0xb8) == 0xa0) {
|
|
t = (data[6] << 2) | ((data[7] >> 6) & 3);
|
|
if (features->type >= INTUOS4S && features->type <= INTUOS4L)
|
|
t = (t << 1) | (data[1] & 1);
|
|
input_report_abs(input, ABS_PRESSURE, t);
|
|
input_report_abs(input, ABS_TILT_X,
|
|
((data[7] << 1) & 0x7e) | (data[8] >> 7));
|
|
input_report_abs(input, ABS_TILT_Y, data[8] & 0x7f);
|
|
input_report_key(input, BTN_STYLUS, data[1] & 2);
|
|
input_report_key(input, BTN_STYLUS2, data[1] & 4);
|
|
input_report_key(input, BTN_TOUCH, t > 10);
|
|
}
|
|
|
|
/* airbrush second packet */
|
|
if ((data[1] & 0xbc) == 0xb4) {
|
|
input_report_abs(input, ABS_WHEEL,
|
|
(data[6] << 2) | ((data[7] >> 6) & 3));
|
|
input_report_abs(input, ABS_TILT_X,
|
|
((data[7] << 1) & 0x7e) | (data[8] >> 7));
|
|
input_report_abs(input, ABS_TILT_Y, data[8] & 0x7f);
|
|
}
|
|
}
|
|
|
|
static int wacom_intuos_irq(struct wacom_wac *wacom)
|
|
{
|
|
struct wacom_features *features = &wacom->features;
|
|
unsigned char *data = wacom->data;
|
|
struct input_dev *input = wacom->input;
|
|
unsigned int t;
|
|
int idx = 0, result;
|
|
|
|
if (data[0] != WACOM_REPORT_PENABLED && data[0] != WACOM_REPORT_INTUOSREAD
|
|
&& data[0] != WACOM_REPORT_INTUOSWRITE && data[0] != WACOM_REPORT_INTUOSPAD) {
|
|
dbg("wacom_intuos_irq: received unknown report #%d", data[0]);
|
|
return 0;
|
|
}
|
|
|
|
/* tool number */
|
|
if (features->type == INTUOS)
|
|
idx = data[1] & 0x01;
|
|
|
|
/* pad packets. Works as a second tool and is always in prox */
|
|
if (data[0] == WACOM_REPORT_INTUOSPAD) {
|
|
/* initiate the pad as a device */
|
|
if (wacom->tool[1] != BTN_TOOL_FINGER)
|
|
wacom->tool[1] = BTN_TOOL_FINGER;
|
|
|
|
if (features->type >= INTUOS4S && features->type <= INTUOS4L) {
|
|
input_report_key(input, BTN_0, (data[2] & 0x01));
|
|
input_report_key(input, BTN_1, (data[3] & 0x01));
|
|
input_report_key(input, BTN_2, (data[3] & 0x02));
|
|
input_report_key(input, BTN_3, (data[3] & 0x04));
|
|
input_report_key(input, BTN_4, (data[3] & 0x08));
|
|
input_report_key(input, BTN_5, (data[3] & 0x10));
|
|
input_report_key(input, BTN_6, (data[3] & 0x20));
|
|
if (data[1] & 0x80) {
|
|
input_report_abs(input, ABS_WHEEL, (data[1] & 0x7f));
|
|
} else {
|
|
/* Out of proximity, clear wheel value. */
|
|
input_report_abs(input, ABS_WHEEL, 0);
|
|
}
|
|
if (features->type != INTUOS4S) {
|
|
input_report_key(input, BTN_7, (data[3] & 0x40));
|
|
input_report_key(input, BTN_8, (data[3] & 0x80));
|
|
}
|
|
if (data[1] | (data[2] & 0x01) | data[3]) {
|
|
input_report_key(input, wacom->tool[1], 1);
|
|
input_report_abs(input, ABS_MISC, PAD_DEVICE_ID);
|
|
} else {
|
|
input_report_key(input, wacom->tool[1], 0);
|
|
input_report_abs(input, ABS_MISC, 0);
|
|
}
|
|
} else {
|
|
if (features->type == WACOM_21UX2) {
|
|
input_report_key(input, BTN_0, (data[5] & 0x01));
|
|
input_report_key(input, BTN_1, (data[6] & 0x01));
|
|
input_report_key(input, BTN_2, (data[6] & 0x02));
|
|
input_report_key(input, BTN_3, (data[6] & 0x04));
|
|
input_report_key(input, BTN_4, (data[6] & 0x08));
|
|
input_report_key(input, BTN_5, (data[6] & 0x10));
|
|
input_report_key(input, BTN_6, (data[6] & 0x20));
|
|
input_report_key(input, BTN_7, (data[6] & 0x40));
|
|
input_report_key(input, BTN_8, (data[6] & 0x80));
|
|
input_report_key(input, BTN_9, (data[7] & 0x01));
|
|
input_report_key(input, BTN_A, (data[8] & 0x01));
|
|
input_report_key(input, BTN_B, (data[8] & 0x02));
|
|
input_report_key(input, BTN_C, (data[8] & 0x04));
|
|
input_report_key(input, BTN_X, (data[8] & 0x08));
|
|
input_report_key(input, BTN_Y, (data[8] & 0x10));
|
|
input_report_key(input, BTN_Z, (data[8] & 0x20));
|
|
input_report_key(input, BTN_BASE, (data[8] & 0x40));
|
|
input_report_key(input, BTN_BASE2, (data[8] & 0x80));
|
|
} else {
|
|
input_report_key(input, BTN_0, (data[5] & 0x01));
|
|
input_report_key(input, BTN_1, (data[5] & 0x02));
|
|
input_report_key(input, BTN_2, (data[5] & 0x04));
|
|
input_report_key(input, BTN_3, (data[5] & 0x08));
|
|
input_report_key(input, BTN_4, (data[6] & 0x01));
|
|
input_report_key(input, BTN_5, (data[6] & 0x02));
|
|
input_report_key(input, BTN_6, (data[6] & 0x04));
|
|
input_report_key(input, BTN_7, (data[6] & 0x08));
|
|
input_report_key(input, BTN_8, (data[5] & 0x10));
|
|
input_report_key(input, BTN_9, (data[6] & 0x10));
|
|
}
|
|
input_report_abs(input, ABS_RX, ((data[1] & 0x1f) << 8) | data[2]);
|
|
input_report_abs(input, ABS_RY, ((data[3] & 0x1f) << 8) | data[4]);
|
|
|
|
if ((data[5] & 0x1f) | data[6] | (data[1] & 0x1f) |
|
|
data[2] | (data[3] & 0x1f) | data[4] | data[8] |
|
|
(data[7] & 0x01)) {
|
|
input_report_key(input, wacom->tool[1], 1);
|
|
input_report_abs(input, ABS_MISC, PAD_DEVICE_ID);
|
|
} else {
|
|
input_report_key(input, wacom->tool[1], 0);
|
|
input_report_abs(input, ABS_MISC, 0);
|
|
}
|
|
}
|
|
input_event(input, EV_MSC, MSC_SERIAL, 0xffffffff);
|
|
return 1;
|
|
}
|
|
|
|
/* process in/out prox events */
|
|
result = wacom_intuos_inout(wacom);
|
|
if (result)
|
|
return result - 1;
|
|
|
|
/* don't proceed if we don't know the ID */
|
|
if (!wacom->id[idx])
|
|
return 0;
|
|
|
|
/* Only large Intuos support Lense Cursor */
|
|
if (wacom->tool[idx] == BTN_TOOL_LENS &&
|
|
(features->type == INTUOS3 ||
|
|
features->type == INTUOS3S ||
|
|
features->type == INTUOS4 ||
|
|
features->type == INTUOS4S)) {
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Cintiq doesn't send data when RDY bit isn't set */
|
|
if (features->type == CINTIQ && !(data[1] & 0x40))
|
|
return 0;
|
|
|
|
if (features->type >= INTUOS3S) {
|
|
input_report_abs(input, ABS_X, (data[2] << 9) | (data[3] << 1) | ((data[9] >> 1) & 1));
|
|
input_report_abs(input, ABS_Y, (data[4] << 9) | (data[5] << 1) | (data[9] & 1));
|
|
input_report_abs(input, ABS_DISTANCE, ((data[9] >> 2) & 0x3f));
|
|
} else {
|
|
input_report_abs(input, ABS_X, be16_to_cpup((__be16 *)&data[2]));
|
|
input_report_abs(input, ABS_Y, be16_to_cpup((__be16 *)&data[4]));
|
|
input_report_abs(input, ABS_DISTANCE, ((data[9] >> 3) & 0x1f));
|
|
}
|
|
|
|
/* process general packets */
|
|
wacom_intuos_general(wacom);
|
|
|
|
/* 4D mouse, 2D mouse, marker pen rotation, tilt mouse, or Lens cursor packets */
|
|
if ((data[1] & 0xbc) == 0xa8 || (data[1] & 0xbe) == 0xb0 || (data[1] & 0xbc) == 0xac) {
|
|
|
|
if (data[1] & 0x02) {
|
|
/* Rotation packet */
|
|
if (features->type >= INTUOS3S) {
|
|
/* I3 marker pen rotation */
|
|
t = (data[6] << 3) | ((data[7] >> 5) & 7);
|
|
t = (data[7] & 0x20) ? ((t > 900) ? ((t-1) / 2 - 1350) :
|
|
((t-1) / 2 + 450)) : (450 - t / 2) ;
|
|
input_report_abs(input, ABS_Z, t);
|
|
} else {
|
|
/* 4D mouse rotation packet */
|
|
t = (data[6] << 3) | ((data[7] >> 5) & 7);
|
|
input_report_abs(input, ABS_RZ, (data[7] & 0x20) ?
|
|
((t - 1) / 2) : -t / 2);
|
|
}
|
|
|
|
} else if (!(data[1] & 0x10) && features->type < INTUOS3S) {
|
|
/* 4D mouse packet */
|
|
input_report_key(input, BTN_LEFT, data[8] & 0x01);
|
|
input_report_key(input, BTN_MIDDLE, data[8] & 0x02);
|
|
input_report_key(input, BTN_RIGHT, data[8] & 0x04);
|
|
|
|
input_report_key(input, BTN_SIDE, data[8] & 0x20);
|
|
input_report_key(input, BTN_EXTRA, data[8] & 0x10);
|
|
t = (data[6] << 2) | ((data[7] >> 6) & 3);
|
|
input_report_abs(input, ABS_THROTTLE, (data[8] & 0x08) ? -t : t);
|
|
|
|
} else if (wacom->tool[idx] == BTN_TOOL_MOUSE) {
|
|
/* I4 mouse */
|
|
if (features->type >= INTUOS4S && features->type <= INTUOS4L) {
|
|
input_report_key(input, BTN_LEFT, data[6] & 0x01);
|
|
input_report_key(input, BTN_MIDDLE, data[6] & 0x02);
|
|
input_report_key(input, BTN_RIGHT, data[6] & 0x04);
|
|
input_report_rel(input, REL_WHEEL, ((data[7] & 0x80) >> 7)
|
|
- ((data[7] & 0x40) >> 6));
|
|
input_report_key(input, BTN_SIDE, data[6] & 0x08);
|
|
input_report_key(input, BTN_EXTRA, data[6] & 0x10);
|
|
|
|
input_report_abs(input, ABS_TILT_X,
|
|
((data[7] << 1) & 0x7e) | (data[8] >> 7));
|
|
input_report_abs(input, ABS_TILT_Y, data[8] & 0x7f);
|
|
} else {
|
|
/* 2D mouse packet */
|
|
input_report_key(input, BTN_LEFT, data[8] & 0x04);
|
|
input_report_key(input, BTN_MIDDLE, data[8] & 0x08);
|
|
input_report_key(input, BTN_RIGHT, data[8] & 0x10);
|
|
input_report_rel(input, REL_WHEEL, (data[8] & 0x01)
|
|
- ((data[8] & 0x02) >> 1));
|
|
|
|
/* I3 2D mouse side buttons */
|
|
if (features->type >= INTUOS3S && features->type <= INTUOS3L) {
|
|
input_report_key(input, BTN_SIDE, data[8] & 0x40);
|
|
input_report_key(input, BTN_EXTRA, data[8] & 0x20);
|
|
}
|
|
}
|
|
} else if ((features->type < INTUOS3S || features->type == INTUOS3L ||
|
|
features->type == INTUOS4L) &&
|
|
wacom->tool[idx] == BTN_TOOL_LENS) {
|
|
/* Lens cursor packets */
|
|
input_report_key(input, BTN_LEFT, data[8] & 0x01);
|
|
input_report_key(input, BTN_MIDDLE, data[8] & 0x02);
|
|
input_report_key(input, BTN_RIGHT, data[8] & 0x04);
|
|
input_report_key(input, BTN_SIDE, data[8] & 0x10);
|
|
input_report_key(input, BTN_EXTRA, data[8] & 0x08);
|
|
}
|
|
}
|
|
|
|
input_report_abs(input, ABS_MISC, wacom->id[idx]); /* report tool id */
|
|
input_report_key(input, wacom->tool[idx], 1);
|
|
input_event(input, EV_MSC, MSC_SERIAL, wacom->serial[idx]);
|
|
return 1;
|
|
}
|
|
|
|
|
|
static void wacom_tpc_finger_in(struct wacom_wac *wacom, char *data, int idx)
|
|
{
|
|
struct input_dev *input = wacom->input;
|
|
int finger = idx + 1;
|
|
int x = le16_to_cpup((__le16 *)&data[finger * 2]) & 0x7fff;
|
|
int y = le16_to_cpup((__le16 *)&data[4 + finger * 2]) & 0x7fff;
|
|
|
|
/*
|
|
* Work around input core suppressing "duplicate" events since
|
|
* we are abusing ABS_X/ABS_Y to transmit multi-finger data.
|
|
* This should go away once we switch to true multitouch
|
|
* protocol.
|
|
*/
|
|
if (wacom->last_finger != finger) {
|
|
if (x == input_abs_get_val(input, ABS_X))
|
|
x++;
|
|
|
|
if (y == input_abs_get_val(input, ABS_Y))
|
|
y++;
|
|
}
|
|
|
|
input_report_abs(input, ABS_X, x);
|
|
input_report_abs(input, ABS_Y, y);
|
|
input_report_abs(input, ABS_MISC, wacom->id[0]);
|
|
input_report_key(input, wacom->tool[finger], 1);
|
|
if (!idx)
|
|
input_report_key(input, BTN_TOUCH, 1);
|
|
input_event(input, EV_MSC, MSC_SERIAL, finger);
|
|
input_sync(input);
|
|
|
|
wacom->last_finger = finger;
|
|
}
|
|
|
|
static void wacom_tpc_touch_out(struct wacom_wac *wacom, int idx)
|
|
{
|
|
struct input_dev *input = wacom->input;
|
|
int finger = idx + 1;
|
|
|
|
input_report_abs(input, ABS_X, 0);
|
|
input_report_abs(input, ABS_Y, 0);
|
|
input_report_abs(input, ABS_MISC, 0);
|
|
input_report_key(input, wacom->tool[finger], 0);
|
|
if (!idx)
|
|
input_report_key(input, BTN_TOUCH, 0);
|
|
input_event(input, EV_MSC, MSC_SERIAL, finger);
|
|
input_sync(input);
|
|
}
|
|
|
|
static void wacom_tpc_touch_in(struct wacom_wac *wacom, size_t len)
|
|
{
|
|
char *data = wacom->data;
|
|
struct input_dev *input = wacom->input;
|
|
|
|
wacom->tool[1] = BTN_TOOL_DOUBLETAP;
|
|
wacom->id[0] = TOUCH_DEVICE_ID;
|
|
wacom->tool[2] = BTN_TOOL_TRIPLETAP;
|
|
|
|
if (len != WACOM_PKGLEN_TPC1FG) {
|
|
|
|
switch (data[0]) {
|
|
|
|
case WACOM_REPORT_TPC1FG:
|
|
input_report_abs(input, ABS_X, le16_to_cpup((__le16 *)&data[2]));
|
|
input_report_abs(input, ABS_Y, le16_to_cpup((__le16 *)&data[4]));
|
|
input_report_abs(input, ABS_PRESSURE, le16_to_cpup((__le16 *)&data[6]));
|
|
input_report_key(input, BTN_TOUCH, le16_to_cpup((__le16 *)&data[6]));
|
|
input_report_abs(input, ABS_MISC, wacom->id[0]);
|
|
input_report_key(input, wacom->tool[1], 1);
|
|
input_sync(input);
|
|
break;
|
|
|
|
case WACOM_REPORT_TPC2FG:
|
|
if (data[1] & 0x01)
|
|
wacom_tpc_finger_in(wacom, data, 0);
|
|
else if (wacom->id[1] & 0x01)
|
|
wacom_tpc_touch_out(wacom, 0);
|
|
|
|
if (data[1] & 0x02)
|
|
wacom_tpc_finger_in(wacom, data, 1);
|
|
else if (wacom->id[1] & 0x02)
|
|
wacom_tpc_touch_out(wacom, 1);
|
|
break;
|
|
}
|
|
} else {
|
|
input_report_abs(input, ABS_X, get_unaligned_le16(&data[1]));
|
|
input_report_abs(input, ABS_Y, get_unaligned_le16(&data[3]));
|
|
input_report_key(input, BTN_TOUCH, 1);
|
|
input_report_abs(input, ABS_MISC, wacom->id[1]);
|
|
input_report_key(input, wacom->tool[1], 1);
|
|
input_sync(input);
|
|
}
|
|
}
|
|
|
|
static int wacom_tpc_irq(struct wacom_wac *wacom, size_t len)
|
|
{
|
|
struct wacom_features *features = &wacom->features;
|
|
char *data = wacom->data;
|
|
struct input_dev *input = wacom->input;
|
|
int prox = 0, pressure;
|
|
int retval = 0;
|
|
|
|
dbg("wacom_tpc_irq: received report #%d", data[0]);
|
|
|
|
if (len == WACOM_PKGLEN_TPC1FG || /* single touch */
|
|
data[0] == WACOM_REPORT_TPC1FG || /* single touch */
|
|
data[0] == WACOM_REPORT_TPC2FG) { /* 2FG touch */
|
|
|
|
if (wacom->shared->stylus_in_proximity) {
|
|
if (wacom->id[1] & 0x01)
|
|
wacom_tpc_touch_out(wacom, 0);
|
|
|
|
if (wacom->id[1] & 0x02)
|
|
wacom_tpc_touch_out(wacom, 1);
|
|
|
|
wacom->id[1] = 0;
|
|
return 0;
|
|
}
|
|
|
|
if (len == WACOM_PKGLEN_TPC1FG) { /* with touch */
|
|
prox = data[0] & 0x01;
|
|
} else { /* with capacity */
|
|
if (data[0] == WACOM_REPORT_TPC1FG)
|
|
/* single touch */
|
|
prox = data[1] & 0x01;
|
|
else
|
|
/* 2FG touch data */
|
|
prox = data[1] & 0x03;
|
|
}
|
|
|
|
if (prox) {
|
|
if (!wacom->id[1])
|
|
wacom->last_finger = 1;
|
|
wacom_tpc_touch_in(wacom, len);
|
|
} else {
|
|
if (data[0] == WACOM_REPORT_TPC2FG) {
|
|
/* 2FGT out-prox */
|
|
if (wacom->id[1] & 0x01)
|
|
wacom_tpc_touch_out(wacom, 0);
|
|
|
|
if (wacom->id[1] & 0x02)
|
|
wacom_tpc_touch_out(wacom, 1);
|
|
} else
|
|
/* one finger touch */
|
|
wacom_tpc_touch_out(wacom, 0);
|
|
|
|
wacom->id[0] = 0;
|
|
}
|
|
/* keep prox bit to send proper out-prox event */
|
|
wacom->id[1] = prox;
|
|
} else if (data[0] == WACOM_REPORT_PENABLED) { /* Penabled */
|
|
prox = data[1] & 0x20;
|
|
|
|
if (!wacom->shared->stylus_in_proximity) { /* first in prox */
|
|
/* Going into proximity select tool */
|
|
wacom->tool[0] = (data[1] & 0x0c) ? BTN_TOOL_RUBBER : BTN_TOOL_PEN;
|
|
if (wacom->tool[0] == BTN_TOOL_PEN)
|
|
wacom->id[0] = STYLUS_DEVICE_ID;
|
|
else
|
|
wacom->id[0] = ERASER_DEVICE_ID;
|
|
|
|
wacom->shared->stylus_in_proximity = true;
|
|
}
|
|
input_report_key(input, BTN_STYLUS, data[1] & 0x02);
|
|
input_report_key(input, BTN_STYLUS2, data[1] & 0x10);
|
|
input_report_abs(input, ABS_X, le16_to_cpup((__le16 *)&data[2]));
|
|
input_report_abs(input, ABS_Y, le16_to_cpup((__le16 *)&data[4]));
|
|
pressure = ((data[7] & 0x01) << 8) | data[6];
|
|
if (pressure < 0)
|
|
pressure = features->pressure_max + pressure + 1;
|
|
input_report_abs(input, ABS_PRESSURE, pressure);
|
|
input_report_key(input, BTN_TOUCH, data[1] & 0x05);
|
|
if (!prox) { /* out-prox */
|
|
wacom->id[0] = 0;
|
|
wacom->shared->stylus_in_proximity = false;
|
|
}
|
|
input_report_key(input, wacom->tool[0], prox);
|
|
input_report_abs(input, ABS_MISC, wacom->id[0]);
|
|
retval = 1;
|
|
}
|
|
return retval;
|
|
}
|
|
|
|
void wacom_wac_irq(struct wacom_wac *wacom_wac, size_t len)
|
|
{
|
|
bool sync;
|
|
|
|
switch (wacom_wac->features.type) {
|
|
case PENPARTNER:
|
|
sync = wacom_penpartner_irq(wacom_wac);
|
|
break;
|
|
|
|
case PL:
|
|
sync = wacom_pl_irq(wacom_wac);
|
|
break;
|
|
|
|
case WACOM_G4:
|
|
case GRAPHIRE:
|
|
case WACOM_MO:
|
|
sync = wacom_graphire_irq(wacom_wac);
|
|
break;
|
|
|
|
case PTU:
|
|
sync = wacom_ptu_irq(wacom_wac);
|
|
break;
|
|
|
|
case DTU:
|
|
sync = wacom_dtu_irq(wacom_wac);
|
|
break;
|
|
|
|
case INTUOS:
|
|
case INTUOS3S:
|
|
case INTUOS3:
|
|
case INTUOS3L:
|
|
case INTUOS4S:
|
|
case INTUOS4:
|
|
case INTUOS4L:
|
|
case CINTIQ:
|
|
case WACOM_BEE:
|
|
case WACOM_21UX2:
|
|
sync = wacom_intuos_irq(wacom_wac);
|
|
break;
|
|
|
|
case TABLETPC:
|
|
case TABLETPC2FG:
|
|
sync = wacom_tpc_irq(wacom_wac, len);
|
|
break;
|
|
|
|
default:
|
|
sync = false;
|
|
break;
|
|
}
|
|
|
|
if (sync)
|
|
input_sync(wacom_wac->input);
|
|
}
|
|
|
|
static void wacom_setup_intuos(struct wacom_wac *wacom_wac)
|
|
{
|
|
struct input_dev *input_dev = wacom_wac->input;
|
|
|
|
input_set_capability(input_dev, EV_MSC, MSC_SERIAL);
|
|
input_set_capability(input_dev, EV_REL, REL_WHEEL);
|
|
|
|
__set_bit(BTN_LEFT, input_dev->keybit);
|
|
__set_bit(BTN_RIGHT, input_dev->keybit);
|
|
__set_bit(BTN_MIDDLE, input_dev->keybit);
|
|
__set_bit(BTN_SIDE, input_dev->keybit);
|
|
__set_bit(BTN_EXTRA, input_dev->keybit);
|
|
|
|
__set_bit(BTN_TOOL_RUBBER, input_dev->keybit);
|
|
__set_bit(BTN_TOOL_PEN, input_dev->keybit);
|
|
__set_bit(BTN_TOOL_MOUSE, input_dev->keybit);
|
|
__set_bit(BTN_TOOL_BRUSH, input_dev->keybit);
|
|
__set_bit(BTN_TOOL_PENCIL, input_dev->keybit);
|
|
__set_bit(BTN_TOOL_AIRBRUSH, input_dev->keybit);
|
|
__set_bit(BTN_TOOL_LENS, input_dev->keybit);
|
|
__set_bit(BTN_STYLUS, input_dev->keybit);
|
|
__set_bit(BTN_STYLUS2, input_dev->keybit);
|
|
|
|
input_set_abs_params(input_dev, ABS_DISTANCE,
|
|
0, wacom_wac->features.distance_max, 0, 0);
|
|
input_set_abs_params(input_dev, ABS_WHEEL, 0, 1023, 0, 0);
|
|
input_set_abs_params(input_dev, ABS_TILT_X, 0, 127, 0, 0);
|
|
input_set_abs_params(input_dev, ABS_TILT_Y, 0, 127, 0, 0);
|
|
input_set_abs_params(input_dev, ABS_RZ, -900, 899, 0, 0);
|
|
input_set_abs_params(input_dev, ABS_THROTTLE, -1023, 1023, 0, 0);
|
|
}
|
|
|
|
void wacom_setup_input_capabilities(struct input_dev *input_dev,
|
|
struct wacom_wac *wacom_wac)
|
|
{
|
|
struct wacom_features *features = &wacom_wac->features;
|
|
int i;
|
|
|
|
input_dev->evbit[0] |= BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
|
|
|
|
__set_bit(BTN_TOUCH, input_dev->keybit);
|
|
|
|
input_set_abs_params(input_dev, ABS_X, 0, features->x_max, 4, 0);
|
|
input_set_abs_params(input_dev, ABS_Y, 0, features->y_max, 4, 0);
|
|
input_set_abs_params(input_dev, ABS_PRESSURE, 0, features->pressure_max, 0, 0);
|
|
|
|
__set_bit(ABS_MISC, input_dev->absbit);
|
|
|
|
switch (wacom_wac->features.type) {
|
|
case WACOM_MO:
|
|
__set_bit(BTN_1, input_dev->keybit);
|
|
__set_bit(BTN_5, input_dev->keybit);
|
|
|
|
input_set_abs_params(input_dev, ABS_WHEEL, 0, 71, 0, 0);
|
|
/* fall through */
|
|
|
|
case WACOM_G4:
|
|
input_set_capability(input_dev, EV_MSC, MSC_SERIAL);
|
|
|
|
__set_bit(BTN_TOOL_FINGER, input_dev->keybit);
|
|
__set_bit(BTN_0, input_dev->keybit);
|
|
__set_bit(BTN_4, input_dev->keybit);
|
|
/* fall through */
|
|
|
|
case GRAPHIRE:
|
|
input_set_capability(input_dev, EV_REL, REL_WHEEL);
|
|
|
|
__set_bit(BTN_LEFT, input_dev->keybit);
|
|
__set_bit(BTN_RIGHT, input_dev->keybit);
|
|
__set_bit(BTN_MIDDLE, input_dev->keybit);
|
|
|
|
__set_bit(BTN_TOOL_RUBBER, input_dev->keybit);
|
|
__set_bit(BTN_TOOL_PEN, input_dev->keybit);
|
|
__set_bit(BTN_TOOL_MOUSE, input_dev->keybit);
|
|
__set_bit(BTN_STYLUS, input_dev->keybit);
|
|
__set_bit(BTN_STYLUS2, input_dev->keybit);
|
|
break;
|
|
|
|
case WACOM_21UX2:
|
|
__set_bit(BTN_A, input_dev->keybit);
|
|
__set_bit(BTN_B, input_dev->keybit);
|
|
__set_bit(BTN_C, input_dev->keybit);
|
|
__set_bit(BTN_X, input_dev->keybit);
|
|
__set_bit(BTN_Y, input_dev->keybit);
|
|
__set_bit(BTN_Z, input_dev->keybit);
|
|
__set_bit(BTN_BASE, input_dev->keybit);
|
|
__set_bit(BTN_BASE2, input_dev->keybit);
|
|
/* fall through */
|
|
|
|
case WACOM_BEE:
|
|
__set_bit(BTN_8, input_dev->keybit);
|
|
__set_bit(BTN_9, input_dev->keybit);
|
|
/* fall through */
|
|
|
|
case INTUOS3:
|
|
case INTUOS3L:
|
|
case CINTIQ:
|
|
__set_bit(BTN_4, input_dev->keybit);
|
|
__set_bit(BTN_5, input_dev->keybit);
|
|
__set_bit(BTN_6, input_dev->keybit);
|
|
__set_bit(BTN_7, input_dev->keybit);
|
|
|
|
input_set_abs_params(input_dev, ABS_RY, 0, 4096, 0, 0);
|
|
/* fall through */
|
|
|
|
case INTUOS3S:
|
|
__set_bit(BTN_0, input_dev->keybit);
|
|
__set_bit(BTN_1, input_dev->keybit);
|
|
__set_bit(BTN_2, input_dev->keybit);
|
|
__set_bit(BTN_3, input_dev->keybit);
|
|
|
|
__set_bit(BTN_TOOL_FINGER, input_dev->keybit);
|
|
|
|
input_set_abs_params(input_dev, ABS_RX, 0, 4096, 0, 0);
|
|
input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0);
|
|
/* fall through */
|
|
|
|
case INTUOS:
|
|
wacom_setup_intuos(wacom_wac);
|
|
break;
|
|
|
|
case INTUOS4:
|
|
case INTUOS4L:
|
|
__set_bit(BTN_7, input_dev->keybit);
|
|
__set_bit(BTN_8, input_dev->keybit);
|
|
/* fall through */
|
|
|
|
case INTUOS4S:
|
|
for (i = 0; i < 7; i++)
|
|
__set_bit(BTN_0 + i, input_dev->keybit);
|
|
__set_bit(BTN_TOOL_FINGER, input_dev->keybit);
|
|
|
|
input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0);
|
|
wacom_setup_intuos(wacom_wac);
|
|
break;
|
|
|
|
case TABLETPC2FG:
|
|
if (features->device_type == BTN_TOOL_TRIPLETAP) {
|
|
__set_bit(BTN_TOOL_TRIPLETAP, input_dev->keybit);
|
|
input_set_capability(input_dev, EV_MSC, MSC_SERIAL);
|
|
}
|
|
/* fall through */
|
|
|
|
case TABLETPC:
|
|
if (features->device_type == BTN_TOOL_DOUBLETAP ||
|
|
features->device_type == BTN_TOOL_TRIPLETAP) {
|
|
input_set_abs_params(input_dev, ABS_RX, 0, features->x_phy, 0, 0);
|
|
input_set_abs_params(input_dev, ABS_RY, 0, features->y_phy, 0, 0);
|
|
__set_bit(BTN_TOOL_DOUBLETAP, input_dev->keybit);
|
|
}
|
|
|
|
if (features->device_type != BTN_TOOL_PEN)
|
|
break; /* no need to process stylus stuff */
|
|
|
|
/* fall through */
|
|
|
|
case PL:
|
|
case PTU:
|
|
case DTU:
|
|
__set_bit(BTN_TOOL_PEN, input_dev->keybit);
|
|
__set_bit(BTN_STYLUS, input_dev->keybit);
|
|
__set_bit(BTN_STYLUS2, input_dev->keybit);
|
|
/* fall through */
|
|
|
|
case PENPARTNER:
|
|
__set_bit(BTN_TOOL_RUBBER, input_dev->keybit);
|
|
break;
|
|
}
|
|
}
|
|
|
|
static const struct wacom_features wacom_features_0x00 =
|
|
{ "Wacom Penpartner", WACOM_PKGLEN_PENPRTN, 5040, 3780, 255, 0, PENPARTNER };
|
|
static const struct wacom_features wacom_features_0x10 =
|
|
{ "Wacom Graphire", WACOM_PKGLEN_GRAPHIRE, 10206, 7422, 511, 63, GRAPHIRE };
|
|
static const struct wacom_features wacom_features_0x11 =
|
|
{ "Wacom Graphire2 4x5", WACOM_PKGLEN_GRAPHIRE, 10206, 7422, 511, 63, GRAPHIRE };
|
|
static const struct wacom_features wacom_features_0x12 =
|
|
{ "Wacom Graphire2 5x7", WACOM_PKGLEN_GRAPHIRE, 13918, 10206, 511, 63, GRAPHIRE };
|
|
static const struct wacom_features wacom_features_0x13 =
|
|
{ "Wacom Graphire3", WACOM_PKGLEN_GRAPHIRE, 10208, 7424, 511, 63, GRAPHIRE };
|
|
static const struct wacom_features wacom_features_0x14 =
|
|
{ "Wacom Graphire3 6x8", WACOM_PKGLEN_GRAPHIRE, 16704, 12064, 511, 63, GRAPHIRE };
|
|
static const struct wacom_features wacom_features_0x15 =
|
|
{ "Wacom Graphire4 4x5", WACOM_PKGLEN_GRAPHIRE, 10208, 7424, 511, 63, WACOM_G4 };
|
|
static const struct wacom_features wacom_features_0x16 =
|
|
{ "Wacom Graphire4 6x8", WACOM_PKGLEN_GRAPHIRE, 16704, 12064, 511, 63, WACOM_G4 };
|
|
static const struct wacom_features wacom_features_0x17 =
|
|
{ "Wacom BambooFun 4x5", WACOM_PKGLEN_BBFUN, 14760, 9225, 511, 63, WACOM_MO };
|
|
static const struct wacom_features wacom_features_0x18 =
|
|
{ "Wacom BambooFun 6x8", WACOM_PKGLEN_BBFUN, 21648, 13530, 511, 63, WACOM_MO };
|
|
static const struct wacom_features wacom_features_0x19 =
|
|
{ "Wacom Bamboo1 Medium", WACOM_PKGLEN_GRAPHIRE, 16704, 12064, 511, 63, GRAPHIRE };
|
|
static const struct wacom_features wacom_features_0x60 =
|
|
{ "Wacom Volito", WACOM_PKGLEN_GRAPHIRE, 5104, 3712, 511, 63, GRAPHIRE };
|
|
static const struct wacom_features wacom_features_0x61 =
|
|
{ "Wacom PenStation2", WACOM_PKGLEN_GRAPHIRE, 3250, 2320, 255, 63, GRAPHIRE };
|
|
static const struct wacom_features wacom_features_0x62 =
|
|
{ "Wacom Volito2 4x5", WACOM_PKGLEN_GRAPHIRE, 5104, 3712, 511, 63, GRAPHIRE };
|
|
static const struct wacom_features wacom_features_0x63 =
|
|
{ "Wacom Volito2 2x3", WACOM_PKGLEN_GRAPHIRE, 3248, 2320, 511, 63, GRAPHIRE };
|
|
static const struct wacom_features wacom_features_0x64 =
|
|
{ "Wacom PenPartner2", WACOM_PKGLEN_GRAPHIRE, 3250, 2320, 511, 63, GRAPHIRE };
|
|
static const struct wacom_features wacom_features_0x65 =
|
|
{ "Wacom Bamboo", WACOM_PKGLEN_BBFUN, 14760, 9225, 511, 63, WACOM_MO };
|
|
static const struct wacom_features wacom_features_0x69 =
|
|
{ "Wacom Bamboo1", WACOM_PKGLEN_GRAPHIRE, 5104, 3712, 511, 63, GRAPHIRE };
|
|
static const struct wacom_features wacom_features_0x20 =
|
|
{ "Wacom Intuos 4x5", WACOM_PKGLEN_INTUOS, 12700, 10600, 1023, 31, INTUOS };
|
|
static const struct wacom_features wacom_features_0x21 =
|
|
{ "Wacom Intuos 6x8", WACOM_PKGLEN_INTUOS, 20320, 16240, 1023, 31, INTUOS };
|
|
static const struct wacom_features wacom_features_0x22 =
|
|
{ "Wacom Intuos 9x12", WACOM_PKGLEN_INTUOS, 30480, 24060, 1023, 31, INTUOS };
|
|
static const struct wacom_features wacom_features_0x23 =
|
|
{ "Wacom Intuos 12x12", WACOM_PKGLEN_INTUOS, 30480, 31680, 1023, 31, INTUOS };
|
|
static const struct wacom_features wacom_features_0x24 =
|
|
{ "Wacom Intuos 12x18", WACOM_PKGLEN_INTUOS, 45720, 31680, 1023, 31, INTUOS };
|
|
static const struct wacom_features wacom_features_0x30 =
|
|
{ "Wacom PL400", WACOM_PKGLEN_GRAPHIRE, 5408, 4056, 255, 0, PL };
|
|
static const struct wacom_features wacom_features_0x31 =
|
|
{ "Wacom PL500", WACOM_PKGLEN_GRAPHIRE, 6144, 4608, 255, 0, PL };
|
|
static const struct wacom_features wacom_features_0x32 =
|
|
{ "Wacom PL600", WACOM_PKGLEN_GRAPHIRE, 6126, 4604, 255, 0, PL };
|
|
static const struct wacom_features wacom_features_0x33 =
|
|
{ "Wacom PL600SX", WACOM_PKGLEN_GRAPHIRE, 6260, 5016, 255, 0, PL };
|
|
static const struct wacom_features wacom_features_0x34 =
|
|
{ "Wacom PL550", WACOM_PKGLEN_GRAPHIRE, 6144, 4608, 511, 0, PL };
|
|
static const struct wacom_features wacom_features_0x35 =
|
|
{ "Wacom PL800", WACOM_PKGLEN_GRAPHIRE, 7220, 5780, 511, 0, PL };
|
|
static const struct wacom_features wacom_features_0x37 =
|
|
{ "Wacom PL700", WACOM_PKGLEN_GRAPHIRE, 6758, 5406, 511, 0, PL };
|
|
static const struct wacom_features wacom_features_0x38 =
|
|
{ "Wacom PL510", WACOM_PKGLEN_GRAPHIRE, 6282, 4762, 511, 0, PL };
|
|
static const struct wacom_features wacom_features_0x39 =
|
|
{ "Wacom DTU710", WACOM_PKGLEN_GRAPHIRE, 34080, 27660, 511, 0, PL };
|
|
static const struct wacom_features wacom_features_0xC4 =
|
|
{ "Wacom DTF521", WACOM_PKGLEN_GRAPHIRE, 6282, 4762, 511, 0, PL };
|
|
static const struct wacom_features wacom_features_0xC0 =
|
|
{ "Wacom DTF720", WACOM_PKGLEN_GRAPHIRE, 6858, 5506, 511, 0, PL };
|
|
static const struct wacom_features wacom_features_0xC2 =
|
|
{ "Wacom DTF720a", WACOM_PKGLEN_GRAPHIRE, 6858, 5506, 511, 0, PL };
|
|
static const struct wacom_features wacom_features_0x03 =
|
|
{ "Wacom Cintiq Partner", WACOM_PKGLEN_GRAPHIRE, 20480, 15360, 511, 0, PTU };
|
|
static const struct wacom_features wacom_features_0x41 =
|
|
{ "Wacom Intuos2 4x5", WACOM_PKGLEN_INTUOS, 12700, 10600, 1023, 31, INTUOS };
|
|
static const struct wacom_features wacom_features_0x42 =
|
|
{ "Wacom Intuos2 6x8", WACOM_PKGLEN_INTUOS, 20320, 16240, 1023, 31, INTUOS };
|
|
static const struct wacom_features wacom_features_0x43 =
|
|
{ "Wacom Intuos2 9x12", WACOM_PKGLEN_INTUOS, 30480, 24060, 1023, 31, INTUOS };
|
|
static const struct wacom_features wacom_features_0x44 =
|
|
{ "Wacom Intuos2 12x12", WACOM_PKGLEN_INTUOS, 30480, 31680, 1023, 31, INTUOS };
|
|
static const struct wacom_features wacom_features_0x45 =
|
|
{ "Wacom Intuos2 12x18", WACOM_PKGLEN_INTUOS, 45720, 31680, 1023, 31, INTUOS };
|
|
static const struct wacom_features wacom_features_0xB0 =
|
|
{ "Wacom Intuos3 4x5", WACOM_PKGLEN_INTUOS, 25400, 20320, 1023, 63, INTUOS3S };
|
|
static const struct wacom_features wacom_features_0xB1 =
|
|
{ "Wacom Intuos3 6x8", WACOM_PKGLEN_INTUOS, 40640, 30480, 1023, 63, INTUOS3 };
|
|
static const struct wacom_features wacom_features_0xB2 =
|
|
{ "Wacom Intuos3 9x12", WACOM_PKGLEN_INTUOS, 60960, 45720, 1023, 63, INTUOS3 };
|
|
static const struct wacom_features wacom_features_0xB3 =
|
|
{ "Wacom Intuos3 12x12", WACOM_PKGLEN_INTUOS, 60960, 60960, 1023, 63, INTUOS3L };
|
|
static const struct wacom_features wacom_features_0xB4 =
|
|
{ "Wacom Intuos3 12x19", WACOM_PKGLEN_INTUOS, 97536, 60960, 1023, 63, INTUOS3L };
|
|
static const struct wacom_features wacom_features_0xB5 =
|
|
{ "Wacom Intuos3 6x11", WACOM_PKGLEN_INTUOS, 54204, 31750, 1023, 63, INTUOS3 };
|
|
static const struct wacom_features wacom_features_0xB7 =
|
|
{ "Wacom Intuos3 4x6", WACOM_PKGLEN_INTUOS, 31496, 19685, 1023, 63, INTUOS3S };
|
|
static const struct wacom_features wacom_features_0xB8 =
|
|
{ "Wacom Intuos4 4x6", WACOM_PKGLEN_INTUOS, 31496, 19685, 2047, 63, INTUOS4S };
|
|
static const struct wacom_features wacom_features_0xB9 =
|
|
{ "Wacom Intuos4 6x9", WACOM_PKGLEN_INTUOS, 44704, 27940, 2047, 63, INTUOS4 };
|
|
static const struct wacom_features wacom_features_0xBA =
|
|
{ "Wacom Intuos4 8x13", WACOM_PKGLEN_INTUOS, 65024, 40640, 2047, 63, INTUOS4L };
|
|
static const struct wacom_features wacom_features_0xBB =
|
|
{ "Wacom Intuos4 12x19", WACOM_PKGLEN_INTUOS, 97536, 60960, 2047, 63, INTUOS4L };
|
|
static const struct wacom_features wacom_features_0xBC =
|
|
{ "Wacom Intuos4 WL", WACOM_PKGLEN_INTUOS, 40840, 25400, 2047, 63, INTUOS4 };
|
|
static const struct wacom_features wacom_features_0x3F =
|
|
{ "Wacom Cintiq 21UX", WACOM_PKGLEN_INTUOS, 87200, 65600, 1023, 63, CINTIQ };
|
|
static const struct wacom_features wacom_features_0xC5 =
|
|
{ "Wacom Cintiq 20WSX", WACOM_PKGLEN_INTUOS, 86680, 54180, 1023, 63, WACOM_BEE };
|
|
static const struct wacom_features wacom_features_0xC6 =
|
|
{ "Wacom Cintiq 12WX", WACOM_PKGLEN_INTUOS, 53020, 33440, 1023, 63, WACOM_BEE };
|
|
static const struct wacom_features wacom_features_0xC7 =
|
|
{ "Wacom DTU1931", WACOM_PKGLEN_GRAPHIRE, 37832, 30305, 511, 0, PL };
|
|
static const struct wacom_features wacom_features_0xCE =
|
|
{ "Wacom DTU2231", WACOM_PKGLEN_GRAPHIRE, 47864, 27011, 511, 0, DTU };
|
|
static const struct wacom_features wacom_features_0xF0 =
|
|
{ "Wacom DTU1631", WACOM_PKGLEN_GRAPHIRE, 34623, 19553, 511, 0, DTU };
|
|
static const struct wacom_features wacom_features_0xCC =
|
|
{ "Wacom Cintiq 21UX2", WACOM_PKGLEN_INTUOS, 87200, 65600, 2047, 63, WACOM_21UX2 };
|
|
static const struct wacom_features wacom_features_0x90 =
|
|
{ "Wacom ISDv4 90", WACOM_PKGLEN_GRAPHIRE, 26202, 16325, 255, 0, TABLETPC };
|
|
static const struct wacom_features wacom_features_0x93 =
|
|
{ "Wacom ISDv4 93", WACOM_PKGLEN_GRAPHIRE, 26202, 16325, 255, 0, TABLETPC };
|
|
static const struct wacom_features wacom_features_0x9A =
|
|
{ "Wacom ISDv4 9A", WACOM_PKGLEN_GRAPHIRE, 26202, 16325, 255, 0, TABLETPC };
|
|
static const struct wacom_features wacom_features_0x9F =
|
|
{ "Wacom ISDv4 9F", WACOM_PKGLEN_GRAPHIRE, 26202, 16325, 255, 0, TABLETPC };
|
|
static const struct wacom_features wacom_features_0xE2 =
|
|
{ "Wacom ISDv4 E2", WACOM_PKGLEN_TPC2FG, 26202, 16325, 255, 0, TABLETPC2FG };
|
|
static const struct wacom_features wacom_features_0xE3 =
|
|
{ "Wacom ISDv4 E3", WACOM_PKGLEN_TPC2FG, 26202, 16325, 255, 0, TABLETPC2FG };
|
|
static const struct wacom_features wacom_features_0x47 =
|
|
{ "Wacom Intuos2 6x8", WACOM_PKGLEN_INTUOS, 20320, 16240, 1023, 31, INTUOS };
|
|
|
|
#define USB_DEVICE_WACOM(prod) \
|
|
USB_DEVICE(USB_VENDOR_ID_WACOM, prod), \
|
|
.driver_info = (kernel_ulong_t)&wacom_features_##prod
|
|
|
|
const struct usb_device_id wacom_ids[] = {
|
|
{ USB_DEVICE_WACOM(0x00) },
|
|
{ USB_DEVICE_WACOM(0x10) },
|
|
{ USB_DEVICE_WACOM(0x11) },
|
|
{ USB_DEVICE_WACOM(0x12) },
|
|
{ USB_DEVICE_WACOM(0x13) },
|
|
{ USB_DEVICE_WACOM(0x14) },
|
|
{ USB_DEVICE_WACOM(0x15) },
|
|
{ USB_DEVICE_WACOM(0x16) },
|
|
{ USB_DEVICE_WACOM(0x17) },
|
|
{ USB_DEVICE_WACOM(0x18) },
|
|
{ USB_DEVICE_WACOM(0x19) },
|
|
{ USB_DEVICE_WACOM(0x60) },
|
|
{ USB_DEVICE_WACOM(0x61) },
|
|
{ USB_DEVICE_WACOM(0x62) },
|
|
{ USB_DEVICE_WACOM(0x63) },
|
|
{ USB_DEVICE_WACOM(0x64) },
|
|
{ USB_DEVICE_WACOM(0x65) },
|
|
{ USB_DEVICE_WACOM(0x69) },
|
|
{ USB_DEVICE_WACOM(0x20) },
|
|
{ USB_DEVICE_WACOM(0x21) },
|
|
{ USB_DEVICE_WACOM(0x22) },
|
|
{ USB_DEVICE_WACOM(0x23) },
|
|
{ USB_DEVICE_WACOM(0x24) },
|
|
{ USB_DEVICE_WACOM(0x30) },
|
|
{ USB_DEVICE_WACOM(0x31) },
|
|
{ USB_DEVICE_WACOM(0x32) },
|
|
{ USB_DEVICE_WACOM(0x33) },
|
|
{ USB_DEVICE_WACOM(0x34) },
|
|
{ USB_DEVICE_WACOM(0x35) },
|
|
{ USB_DEVICE_WACOM(0x37) },
|
|
{ USB_DEVICE_WACOM(0x38) },
|
|
{ USB_DEVICE_WACOM(0x39) },
|
|
{ USB_DEVICE_WACOM(0xC4) },
|
|
{ USB_DEVICE_WACOM(0xC0) },
|
|
{ USB_DEVICE_WACOM(0xC2) },
|
|
{ USB_DEVICE_WACOM(0x03) },
|
|
{ USB_DEVICE_WACOM(0x41) },
|
|
{ USB_DEVICE_WACOM(0x42) },
|
|
{ USB_DEVICE_WACOM(0x43) },
|
|
{ USB_DEVICE_WACOM(0x44) },
|
|
{ USB_DEVICE_WACOM(0x45) },
|
|
{ USB_DEVICE_WACOM(0xB0) },
|
|
{ USB_DEVICE_WACOM(0xB1) },
|
|
{ USB_DEVICE_WACOM(0xB2) },
|
|
{ USB_DEVICE_WACOM(0xB3) },
|
|
{ USB_DEVICE_WACOM(0xB4) },
|
|
{ USB_DEVICE_WACOM(0xB5) },
|
|
{ USB_DEVICE_WACOM(0xB7) },
|
|
{ USB_DEVICE_WACOM(0xB8) },
|
|
{ USB_DEVICE_WACOM(0xB9) },
|
|
{ USB_DEVICE_WACOM(0xBA) },
|
|
{ USB_DEVICE_WACOM(0xBB) },
|
|
{ USB_DEVICE_WACOM(0xBC) },
|
|
{ USB_DEVICE_WACOM(0x3F) },
|
|
{ USB_DEVICE_WACOM(0xC5) },
|
|
{ USB_DEVICE_WACOM(0xC6) },
|
|
{ USB_DEVICE_WACOM(0xC7) },
|
|
{ USB_DEVICE_WACOM(0xCE) },
|
|
{ USB_DEVICE_WACOM(0xF0) },
|
|
{ USB_DEVICE_WACOM(0xCC) },
|
|
{ USB_DEVICE_WACOM(0x90) },
|
|
{ USB_DEVICE_WACOM(0x93) },
|
|
{ USB_DEVICE_WACOM(0x9A) },
|
|
{ USB_DEVICE_WACOM(0x9F) },
|
|
{ USB_DEVICE_WACOM(0xE2) },
|
|
{ USB_DEVICE_WACOM(0xE3) },
|
|
{ USB_DEVICE_WACOM(0x47) },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(usb, wacom_ids);
|