 1685e633b3
			
		
	
	
	1685e633b3
	
	
	
		
			
			* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6:
  pcmcia: avoid buffer overflow in pcmcia_setup_isa_irq
  pcmcia: do not request windows if you don't need to
  pcmcia: insert PCMCIA device resources into resource tree
  pcmcia: export resource information to sysfs
  pcmcia: use struct resource for PCMCIA devices, part 2
  pcmcia: remove memreq_t
  pcmcia: move local definitions out of include/pcmcia/cs.h
  pcmcia: do not use io_req_t when calling pcmcia_request_io()
  pcmcia: do not use io_req_t after call to pcmcia_request_io()
  pcmcia: use struct resource for PCMCIA devices
  pcmcia: clean up cs.h
  pcmcia: use pcmica_{read,write}_config_byte
  pcmcia: remove cs_types.h
  pcmcia: remove unused flag, simplify headers
  pcmcia: remove obsolete CS_EVENT_ definitions
  pcmcia: split up central event handler
  pcmcia: simplify event callback
  pcmcia: remove obsolete ioctl
Conflicts in:
 - drivers/staging/comedi/drivers/*
 - drivers/staging/wlags49_h2/wl_cs.c
due to dev_info_t and whitespace changes
		
	
			
		
			
				
	
	
		
			679 lines
		
	
	
	
		
			14 KiB
			
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			679 lines
		
	
	
	
		
			14 KiB
			
		
	
	
	
		
			C
		
	
	
	
	
	
| /*
 | |
|  *
 | |
|  *  A driver for Nokia Connectivity Card DTL-1 devices
 | |
|  *
 | |
|  *  Copyright (C) 2001-2002  Marcel Holtmann <marcel@holtmann.org>
 | |
|  *
 | |
|  *
 | |
|  *  This program is free software; you can redistribute it and/or modify
 | |
|  *  it under the terms of the GNU General Public License version 2 as
 | |
|  *  published by the Free Software Foundation;
 | |
|  *
 | |
|  *  Software distributed under the License is distributed on an "AS
 | |
|  *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
 | |
|  *  implied. See the License for the specific language governing
 | |
|  *  rights and limitations under the License.
 | |
|  *
 | |
|  *  The initial developer of the original code is David A. Hinds
 | |
|  *  <dahinds@users.sourceforge.net>.  Portions created by David A. Hinds
 | |
|  *  are Copyright (C) 1999 David A. Hinds.  All Rights Reserved.
 | |
|  *
 | |
|  */
 | |
| 
 | |
| #include <linux/module.h>
 | |
| 
 | |
| #include <linux/kernel.h>
 | |
| #include <linux/init.h>
 | |
| #include <linux/slab.h>
 | |
| #include <linux/types.h>
 | |
| #include <linux/delay.h>
 | |
| #include <linux/errno.h>
 | |
| #include <linux/ptrace.h>
 | |
| #include <linux/ioport.h>
 | |
| #include <linux/spinlock.h>
 | |
| #include <linux/moduleparam.h>
 | |
| 
 | |
| #include <linux/skbuff.h>
 | |
| #include <linux/string.h>
 | |
| #include <linux/serial.h>
 | |
| #include <linux/serial_reg.h>
 | |
| #include <linux/bitops.h>
 | |
| #include <asm/system.h>
 | |
| #include <asm/io.h>
 | |
| 
 | |
| #include <pcmcia/cs.h>
 | |
| #include <pcmcia/cistpl.h>
 | |
| #include <pcmcia/ciscode.h>
 | |
| #include <pcmcia/ds.h>
 | |
| #include <pcmcia/cisreg.h>
 | |
| 
 | |
| #include <net/bluetooth/bluetooth.h>
 | |
| #include <net/bluetooth/hci_core.h>
 | |
| 
 | |
| 
 | |
| 
 | |
| /* ======================== Module parameters ======================== */
 | |
| 
 | |
| 
 | |
| MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
 | |
| MODULE_DESCRIPTION("Bluetooth driver for Nokia Connectivity Card DTL-1");
 | |
| MODULE_LICENSE("GPL");
 | |
| 
 | |
| 
 | |
| 
 | |
| /* ======================== Local structures ======================== */
 | |
| 
 | |
| 
 | |
| typedef struct dtl1_info_t {
 | |
| 	struct pcmcia_device *p_dev;
 | |
| 
 | |
| 	struct hci_dev *hdev;
 | |
| 
 | |
| 	spinlock_t lock;		/* For serializing operations */
 | |
| 
 | |
| 	unsigned long flowmask;		/* HCI flow mask */
 | |
| 	int ri_latch;
 | |
| 
 | |
| 	struct sk_buff_head txq;
 | |
| 	unsigned long tx_state;
 | |
| 
 | |
| 	unsigned long rx_state;
 | |
| 	unsigned long rx_count;
 | |
| 	struct sk_buff *rx_skb;
 | |
| } dtl1_info_t;
 | |
| 
 | |
| 
 | |
| static int dtl1_config(struct pcmcia_device *link);
 | |
| static void dtl1_release(struct pcmcia_device *link);
 | |
| 
 | |
| static void dtl1_detach(struct pcmcia_device *p_dev);
 | |
| 
 | |
| 
 | |
| /* Transmit states  */
 | |
| #define XMIT_SENDING  1
 | |
| #define XMIT_WAKEUP   2
 | |
| #define XMIT_WAITING  8
 | |
| 
 | |
| /* Receiver States */
 | |
| #define RECV_WAIT_NSH   0
 | |
| #define RECV_WAIT_DATA  1
 | |
| 
 | |
| 
 | |
| typedef struct {
 | |
| 	u8 type;
 | |
| 	u8 zero;
 | |
| 	u16 len;
 | |
| } __packed nsh_t;	/* Nokia Specific Header */
 | |
| 
 | |
| #define NSHL  4				/* Nokia Specific Header Length */
 | |
| 
 | |
| 
 | |
| 
 | |
| /* ======================== Interrupt handling ======================== */
 | |
| 
 | |
| 
 | |
| static int dtl1_write(unsigned int iobase, int fifo_size, __u8 *buf, int len)
 | |
| {
 | |
| 	int actual = 0;
 | |
| 
 | |
| 	/* Tx FIFO should be empty */
 | |
| 	if (!(inb(iobase + UART_LSR) & UART_LSR_THRE))
 | |
| 		return 0;
 | |
| 
 | |
| 	/* Fill FIFO with current frame */
 | |
| 	while ((fifo_size-- > 0) && (actual < len)) {
 | |
| 		/* Transmit next byte */
 | |
| 		outb(buf[actual], iobase + UART_TX);
 | |
| 		actual++;
 | |
| 	}
 | |
| 
 | |
| 	return actual;
 | |
| }
 | |
| 
 | |
| 
 | |
| static void dtl1_write_wakeup(dtl1_info_t *info)
 | |
| {
 | |
| 	if (!info) {
 | |
| 		BT_ERR("Unknown device");
 | |
| 		return;
 | |
| 	}
 | |
| 
 | |
| 	if (test_bit(XMIT_WAITING, &(info->tx_state))) {
 | |
| 		set_bit(XMIT_WAKEUP, &(info->tx_state));
 | |
| 		return;
 | |
| 	}
 | |
| 
 | |
| 	if (test_and_set_bit(XMIT_SENDING, &(info->tx_state))) {
 | |
| 		set_bit(XMIT_WAKEUP, &(info->tx_state));
 | |
| 		return;
 | |
| 	}
 | |
| 
 | |
| 	do {
 | |
| 		register unsigned int iobase = info->p_dev->resource[0]->start;
 | |
| 		register struct sk_buff *skb;
 | |
| 		register int len;
 | |
| 
 | |
| 		clear_bit(XMIT_WAKEUP, &(info->tx_state));
 | |
| 
 | |
| 		if (!pcmcia_dev_present(info->p_dev))
 | |
| 			return;
 | |
| 
 | |
| 		if (!(skb = skb_dequeue(&(info->txq))))
 | |
| 			break;
 | |
| 
 | |
| 		/* Send frame */
 | |
| 		len = dtl1_write(iobase, 32, skb->data, skb->len);
 | |
| 
 | |
| 		if (len == skb->len) {
 | |
| 			set_bit(XMIT_WAITING, &(info->tx_state));
 | |
| 			kfree_skb(skb);
 | |
| 		} else {
 | |
| 			skb_pull(skb, len);
 | |
| 			skb_queue_head(&(info->txq), skb);
 | |
| 		}
 | |
| 
 | |
| 		info->hdev->stat.byte_tx += len;
 | |
| 
 | |
| 	} while (test_bit(XMIT_WAKEUP, &(info->tx_state)));
 | |
| 
 | |
| 	clear_bit(XMIT_SENDING, &(info->tx_state));
 | |
| }
 | |
| 
 | |
| 
 | |
| static void dtl1_control(dtl1_info_t *info, struct sk_buff *skb)
 | |
| {
 | |
| 	u8 flowmask = *(u8 *)skb->data;
 | |
| 	int i;
 | |
| 
 | |
| 	printk(KERN_INFO "Bluetooth: Nokia control data =");
 | |
| 	for (i = 0; i < skb->len; i++) {
 | |
| 		printk(" %02x", skb->data[i]);
 | |
| 	}
 | |
| 	printk("\n");
 | |
| 
 | |
| 	/* transition to active state */
 | |
| 	if (((info->flowmask & 0x07) == 0) && ((flowmask & 0x07) != 0)) {
 | |
| 		clear_bit(XMIT_WAITING, &(info->tx_state));
 | |
| 		dtl1_write_wakeup(info);
 | |
| 	}
 | |
| 
 | |
| 	info->flowmask = flowmask;
 | |
| 
 | |
| 	kfree_skb(skb);
 | |
| }
 | |
| 
 | |
| 
 | |
| static void dtl1_receive(dtl1_info_t *info)
 | |
| {
 | |
| 	unsigned int iobase;
 | |
| 	nsh_t *nsh;
 | |
| 	int boguscount = 0;
 | |
| 
 | |
| 	if (!info) {
 | |
| 		BT_ERR("Unknown device");
 | |
| 		return;
 | |
| 	}
 | |
| 
 | |
| 	iobase = info->p_dev->resource[0]->start;
 | |
| 
 | |
| 	do {
 | |
| 		info->hdev->stat.byte_rx++;
 | |
| 
 | |
| 		/* Allocate packet */
 | |
| 		if (info->rx_skb == NULL)
 | |
| 			if (!(info->rx_skb = bt_skb_alloc(HCI_MAX_FRAME_SIZE, GFP_ATOMIC))) {
 | |
| 				BT_ERR("Can't allocate mem for new packet");
 | |
| 				info->rx_state = RECV_WAIT_NSH;
 | |
| 				info->rx_count = NSHL;
 | |
| 				return;
 | |
| 			}
 | |
| 
 | |
| 		*skb_put(info->rx_skb, 1) = inb(iobase + UART_RX);
 | |
| 		nsh = (nsh_t *)info->rx_skb->data;
 | |
| 
 | |
| 		info->rx_count--;
 | |
| 
 | |
| 		if (info->rx_count == 0) {
 | |
| 
 | |
| 			switch (info->rx_state) {
 | |
| 			case RECV_WAIT_NSH:
 | |
| 				info->rx_state = RECV_WAIT_DATA;
 | |
| 				info->rx_count = nsh->len + (nsh->len & 0x0001);
 | |
| 				break;
 | |
| 			case RECV_WAIT_DATA:
 | |
| 				bt_cb(info->rx_skb)->pkt_type = nsh->type;
 | |
| 
 | |
| 				/* remove PAD byte if it exists */
 | |
| 				if (nsh->len & 0x0001) {
 | |
| 					info->rx_skb->tail--;
 | |
| 					info->rx_skb->len--;
 | |
| 				}
 | |
| 
 | |
| 				/* remove NSH */
 | |
| 				skb_pull(info->rx_skb, NSHL);
 | |
| 
 | |
| 				switch (bt_cb(info->rx_skb)->pkt_type) {
 | |
| 				case 0x80:
 | |
| 					/* control data for the Nokia Card */
 | |
| 					dtl1_control(info, info->rx_skb);
 | |
| 					break;
 | |
| 				case 0x82:
 | |
| 				case 0x83:
 | |
| 				case 0x84:
 | |
| 					/* send frame to the HCI layer */
 | |
| 					info->rx_skb->dev = (void *) info->hdev;
 | |
| 					bt_cb(info->rx_skb)->pkt_type &= 0x0f;
 | |
| 					hci_recv_frame(info->rx_skb);
 | |
| 					break;
 | |
| 				default:
 | |
| 					/* unknown packet */
 | |
| 					BT_ERR("Unknown HCI packet with type 0x%02x received", bt_cb(info->rx_skb)->pkt_type);
 | |
| 					kfree_skb(info->rx_skb);
 | |
| 					break;
 | |
| 				}
 | |
| 
 | |
| 				info->rx_state = RECV_WAIT_NSH;
 | |
| 				info->rx_count = NSHL;
 | |
| 				info->rx_skb = NULL;
 | |
| 				break;
 | |
| 			}
 | |
| 
 | |
| 		}
 | |
| 
 | |
| 		/* Make sure we don't stay here too long */
 | |
| 		if (boguscount++ > 32)
 | |
| 			break;
 | |
| 
 | |
| 	} while (inb(iobase + UART_LSR) & UART_LSR_DR);
 | |
| }
 | |
| 
 | |
| 
 | |
| static irqreturn_t dtl1_interrupt(int irq, void *dev_inst)
 | |
| {
 | |
| 	dtl1_info_t *info = dev_inst;
 | |
| 	unsigned int iobase;
 | |
| 	unsigned char msr;
 | |
| 	int boguscount = 0;
 | |
| 	int iir, lsr;
 | |
| 	irqreturn_t r = IRQ_NONE;
 | |
| 
 | |
| 	if (!info || !info->hdev)
 | |
| 		/* our irq handler is shared */
 | |
| 		return IRQ_NONE;
 | |
| 
 | |
| 	iobase = info->p_dev->resource[0]->start;
 | |
| 
 | |
| 	spin_lock(&(info->lock));
 | |
| 
 | |
| 	iir = inb(iobase + UART_IIR) & UART_IIR_ID;
 | |
| 	while (iir) {
 | |
| 
 | |
| 		r = IRQ_HANDLED;
 | |
| 		/* Clear interrupt */
 | |
| 		lsr = inb(iobase + UART_LSR);
 | |
| 
 | |
| 		switch (iir) {
 | |
| 		case UART_IIR_RLSI:
 | |
| 			BT_ERR("RLSI");
 | |
| 			break;
 | |
| 		case UART_IIR_RDI:
 | |
| 			/* Receive interrupt */
 | |
| 			dtl1_receive(info);
 | |
| 			break;
 | |
| 		case UART_IIR_THRI:
 | |
| 			if (lsr & UART_LSR_THRE) {
 | |
| 				/* Transmitter ready for data */
 | |
| 				dtl1_write_wakeup(info);
 | |
| 			}
 | |
| 			break;
 | |
| 		default:
 | |
| 			BT_ERR("Unhandled IIR=%#x", iir);
 | |
| 			break;
 | |
| 		}
 | |
| 
 | |
| 		/* Make sure we don't stay here too long */
 | |
| 		if (boguscount++ > 100)
 | |
| 			break;
 | |
| 
 | |
| 		iir = inb(iobase + UART_IIR) & UART_IIR_ID;
 | |
| 
 | |
| 	}
 | |
| 
 | |
| 	msr = inb(iobase + UART_MSR);
 | |
| 
 | |
| 	if (info->ri_latch ^ (msr & UART_MSR_RI)) {
 | |
| 		info->ri_latch = msr & UART_MSR_RI;
 | |
| 		clear_bit(XMIT_WAITING, &(info->tx_state));
 | |
| 		dtl1_write_wakeup(info);
 | |
| 		r = IRQ_HANDLED;
 | |
| 	}
 | |
| 
 | |
| 	spin_unlock(&(info->lock));
 | |
| 
 | |
| 	return r;
 | |
| }
 | |
| 
 | |
| 
 | |
| 
 | |
| /* ======================== HCI interface ======================== */
 | |
| 
 | |
| 
 | |
| static int dtl1_hci_open(struct hci_dev *hdev)
 | |
| {
 | |
| 	set_bit(HCI_RUNNING, &(hdev->flags));
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| 
 | |
| static int dtl1_hci_flush(struct hci_dev *hdev)
 | |
| {
 | |
| 	dtl1_info_t *info = (dtl1_info_t *)(hdev->driver_data);
 | |
| 
 | |
| 	/* Drop TX queue */
 | |
| 	skb_queue_purge(&(info->txq));
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| 
 | |
| static int dtl1_hci_close(struct hci_dev *hdev)
 | |
| {
 | |
| 	if (!test_and_clear_bit(HCI_RUNNING, &(hdev->flags)))
 | |
| 		return 0;
 | |
| 
 | |
| 	dtl1_hci_flush(hdev);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| 
 | |
| static int dtl1_hci_send_frame(struct sk_buff *skb)
 | |
| {
 | |
| 	dtl1_info_t *info;
 | |
| 	struct hci_dev *hdev = (struct hci_dev *)(skb->dev);
 | |
| 	struct sk_buff *s;
 | |
| 	nsh_t nsh;
 | |
| 
 | |
| 	if (!hdev) {
 | |
| 		BT_ERR("Frame for unknown HCI device (hdev=NULL)");
 | |
| 		return -ENODEV;
 | |
| 	}
 | |
| 
 | |
| 	info = (dtl1_info_t *)(hdev->driver_data);
 | |
| 
 | |
| 	switch (bt_cb(skb)->pkt_type) {
 | |
| 	case HCI_COMMAND_PKT:
 | |
| 		hdev->stat.cmd_tx++;
 | |
| 		nsh.type = 0x81;
 | |
| 		break;
 | |
| 	case HCI_ACLDATA_PKT:
 | |
| 		hdev->stat.acl_tx++;
 | |
| 		nsh.type = 0x82;
 | |
| 		break;
 | |
| 	case HCI_SCODATA_PKT:
 | |
| 		hdev->stat.sco_tx++;
 | |
| 		nsh.type = 0x83;
 | |
| 		break;
 | |
| 	default:
 | |
| 		return -EILSEQ;
 | |
| 	};
 | |
| 
 | |
| 	nsh.zero = 0;
 | |
| 	nsh.len = skb->len;
 | |
| 
 | |
| 	s = bt_skb_alloc(NSHL + skb->len + 1, GFP_ATOMIC);
 | |
| 	if (!s)
 | |
| 		return -ENOMEM;
 | |
| 
 | |
| 	skb_reserve(s, NSHL);
 | |
| 	skb_copy_from_linear_data(skb, skb_put(s, skb->len), skb->len);
 | |
| 	if (skb->len & 0x0001)
 | |
| 		*skb_put(s, 1) = 0;	/* PAD */
 | |
| 
 | |
| 	/* Prepend skb with Nokia frame header and queue */
 | |
| 	memcpy(skb_push(s, NSHL), &nsh, NSHL);
 | |
| 	skb_queue_tail(&(info->txq), s);
 | |
| 
 | |
| 	dtl1_write_wakeup(info);
 | |
| 
 | |
| 	kfree_skb(skb);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| 
 | |
| static void dtl1_hci_destruct(struct hci_dev *hdev)
 | |
| {
 | |
| }
 | |
| 
 | |
| 
 | |
| static int dtl1_hci_ioctl(struct hci_dev *hdev, unsigned int cmd,  unsigned long arg)
 | |
| {
 | |
| 	return -ENOIOCTLCMD;
 | |
| }
 | |
| 
 | |
| 
 | |
| 
 | |
| /* ======================== Card services HCI interaction ======================== */
 | |
| 
 | |
| 
 | |
| static int dtl1_open(dtl1_info_t *info)
 | |
| {
 | |
| 	unsigned long flags;
 | |
| 	unsigned int iobase = info->p_dev->resource[0]->start;
 | |
| 	struct hci_dev *hdev;
 | |
| 
 | |
| 	spin_lock_init(&(info->lock));
 | |
| 
 | |
| 	skb_queue_head_init(&(info->txq));
 | |
| 
 | |
| 	info->rx_state = RECV_WAIT_NSH;
 | |
| 	info->rx_count = NSHL;
 | |
| 	info->rx_skb = NULL;
 | |
| 
 | |
| 	set_bit(XMIT_WAITING, &(info->tx_state));
 | |
| 
 | |
| 	/* Initialize HCI device */
 | |
| 	hdev = hci_alloc_dev();
 | |
| 	if (!hdev) {
 | |
| 		BT_ERR("Can't allocate HCI device");
 | |
| 		return -ENOMEM;
 | |
| 	}
 | |
| 
 | |
| 	info->hdev = hdev;
 | |
| 
 | |
| 	hdev->bus = HCI_PCCARD;
 | |
| 	hdev->driver_data = info;
 | |
| 	SET_HCIDEV_DEV(hdev, &info->p_dev->dev);
 | |
| 
 | |
| 	hdev->open     = dtl1_hci_open;
 | |
| 	hdev->close    = dtl1_hci_close;
 | |
| 	hdev->flush    = dtl1_hci_flush;
 | |
| 	hdev->send     = dtl1_hci_send_frame;
 | |
| 	hdev->destruct = dtl1_hci_destruct;
 | |
| 	hdev->ioctl    = dtl1_hci_ioctl;
 | |
| 
 | |
| 	hdev->owner = THIS_MODULE;
 | |
| 
 | |
| 	spin_lock_irqsave(&(info->lock), flags);
 | |
| 
 | |
| 	/* Reset UART */
 | |
| 	outb(0, iobase + UART_MCR);
 | |
| 
 | |
| 	/* Turn off interrupts */
 | |
| 	outb(0, iobase + UART_IER);
 | |
| 
 | |
| 	/* Initialize UART */
 | |
| 	outb(UART_LCR_WLEN8, iobase + UART_LCR);	/* Reset DLAB */
 | |
| 	outb((UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2), iobase + UART_MCR);
 | |
| 
 | |
| 	info->ri_latch = inb(info->p_dev->resource[0]->start + UART_MSR)
 | |
| 				& UART_MSR_RI;
 | |
| 
 | |
| 	/* Turn on interrupts */
 | |
| 	outb(UART_IER_RLSI | UART_IER_RDI | UART_IER_THRI, iobase + UART_IER);
 | |
| 
 | |
| 	spin_unlock_irqrestore(&(info->lock), flags);
 | |
| 
 | |
| 	/* Timeout before it is safe to send the first HCI packet */
 | |
| 	msleep(2000);
 | |
| 
 | |
| 	/* Register HCI device */
 | |
| 	if (hci_register_dev(hdev) < 0) {
 | |
| 		BT_ERR("Can't register HCI device");
 | |
| 		info->hdev = NULL;
 | |
| 		hci_free_dev(hdev);
 | |
| 		return -ENODEV;
 | |
| 	}
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| 
 | |
| static int dtl1_close(dtl1_info_t *info)
 | |
| {
 | |
| 	unsigned long flags;
 | |
| 	unsigned int iobase = info->p_dev->resource[0]->start;
 | |
| 	struct hci_dev *hdev = info->hdev;
 | |
| 
 | |
| 	if (!hdev)
 | |
| 		return -ENODEV;
 | |
| 
 | |
| 	dtl1_hci_close(hdev);
 | |
| 
 | |
| 	spin_lock_irqsave(&(info->lock), flags);
 | |
| 
 | |
| 	/* Reset UART */
 | |
| 	outb(0, iobase + UART_MCR);
 | |
| 
 | |
| 	/* Turn off interrupts */
 | |
| 	outb(0, iobase + UART_IER);
 | |
| 
 | |
| 	spin_unlock_irqrestore(&(info->lock), flags);
 | |
| 
 | |
| 	if (hci_unregister_dev(hdev) < 0)
 | |
| 		BT_ERR("Can't unregister HCI device %s", hdev->name);
 | |
| 
 | |
| 	hci_free_dev(hdev);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int dtl1_probe(struct pcmcia_device *link)
 | |
| {
 | |
| 	dtl1_info_t *info;
 | |
| 
 | |
| 	/* Create new info device */
 | |
| 	info = kzalloc(sizeof(*info), GFP_KERNEL);
 | |
| 	if (!info)
 | |
| 		return -ENOMEM;
 | |
| 
 | |
| 	info->p_dev = link;
 | |
| 	link->priv = info;
 | |
| 
 | |
| 	link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
 | |
| 	link->resource[0]->end = 8;
 | |
| 
 | |
| 	link->conf.Attributes = CONF_ENABLE_IRQ;
 | |
| 	link->conf.IntType = INT_MEMORY_AND_IO;
 | |
| 
 | |
| 	return dtl1_config(link);
 | |
| }
 | |
| 
 | |
| 
 | |
| static void dtl1_detach(struct pcmcia_device *link)
 | |
| {
 | |
| 	dtl1_info_t *info = link->priv;
 | |
| 
 | |
| 	dtl1_release(link);
 | |
| 
 | |
| 	kfree(info);
 | |
| }
 | |
| 
 | |
| static int dtl1_confcheck(struct pcmcia_device *p_dev,
 | |
| 			  cistpl_cftable_entry_t *cf,
 | |
| 			  cistpl_cftable_entry_t *dflt,
 | |
| 			  unsigned int vcc,
 | |
| 			  void *priv_data)
 | |
| {
 | |
| 	if ((cf->io.nwin != 1) || (cf->io.win[0].len <= 8))
 | |
| 		return -ENODEV;
 | |
| 
 | |
| 	p_dev->resource[0]->start = cf->io.win[0].base;
 | |
| 	p_dev->resource[0]->end = cf->io.win[0].len;	/*yo */
 | |
| 	p_dev->io_lines = cf->io.flags & CISTPL_IO_LINES_MASK;
 | |
| 	return pcmcia_request_io(p_dev);
 | |
| }
 | |
| 
 | |
| static int dtl1_config(struct pcmcia_device *link)
 | |
| {
 | |
| 	dtl1_info_t *info = link->priv;
 | |
| 	int i;
 | |
| 
 | |
| 	/* Look for a generic full-sized window */
 | |
| 	link->resource[0]->end = 8;
 | |
| 	if (pcmcia_loop_config(link, dtl1_confcheck, NULL) < 0)
 | |
| 		goto failed;
 | |
| 
 | |
| 	i = pcmcia_request_irq(link, dtl1_interrupt);
 | |
| 	if (i != 0)
 | |
| 		goto failed;
 | |
| 
 | |
| 	i = pcmcia_request_configuration(link, &link->conf);
 | |
| 	if (i != 0)
 | |
| 		goto failed;
 | |
| 
 | |
| 	if (dtl1_open(info) != 0)
 | |
| 		goto failed;
 | |
| 
 | |
| 	return 0;
 | |
| 
 | |
| failed:
 | |
| 	dtl1_release(link);
 | |
| 	return -ENODEV;
 | |
| }
 | |
| 
 | |
| 
 | |
| static void dtl1_release(struct pcmcia_device *link)
 | |
| {
 | |
| 	dtl1_info_t *info = link->priv;
 | |
| 
 | |
| 	dtl1_close(info);
 | |
| 
 | |
| 	pcmcia_disable_device(link);
 | |
| }
 | |
| 
 | |
| 
 | |
| static struct pcmcia_device_id dtl1_ids[] = {
 | |
| 	PCMCIA_DEVICE_PROD_ID12("Nokia Mobile Phones", "DTL-1", 0xe1bfdd64, 0xe168480d),
 | |
| 	PCMCIA_DEVICE_PROD_ID12("Nokia Mobile Phones", "DTL-4", 0xe1bfdd64, 0x9102bc82),
 | |
| 	PCMCIA_DEVICE_PROD_ID12("Socket", "CF", 0xb38bcc2e, 0x44ebf863),
 | |
| 	PCMCIA_DEVICE_PROD_ID12("Socket", "CF+ Personal Network Card", 0xb38bcc2e, 0xe732bae3),
 | |
| 	PCMCIA_DEVICE_NULL
 | |
| };
 | |
| MODULE_DEVICE_TABLE(pcmcia, dtl1_ids);
 | |
| 
 | |
| static struct pcmcia_driver dtl1_driver = {
 | |
| 	.owner		= THIS_MODULE,
 | |
| 	.drv		= {
 | |
| 		.name	= "dtl1_cs",
 | |
| 	},
 | |
| 	.probe		= dtl1_probe,
 | |
| 	.remove		= dtl1_detach,
 | |
| 	.id_table	= dtl1_ids,
 | |
| };
 | |
| 
 | |
| static int __init init_dtl1_cs(void)
 | |
| {
 | |
| 	return pcmcia_register_driver(&dtl1_driver);
 | |
| }
 | |
| 
 | |
| 
 | |
| static void __exit exit_dtl1_cs(void)
 | |
| {
 | |
| 	pcmcia_unregister_driver(&dtl1_driver);
 | |
| }
 | |
| 
 | |
| module_init(init_dtl1_cs);
 | |
| module_exit(exit_dtl1_cs);
 |