 90abdc3b97
			
		
	
	
	90abdc3b97
	
	
	
		
			
			Instead of io_req_t, drivers are now requested to fill out struct pcmcia_device *p_dev->resource[0,1] for up to two ioport ranges. After a call to pcmcia_request_io(), the ports found there are reserved, after calling pcmcia_request_configuration(), they may be used. CC: netdev@vger.kernel.org CC: linux-wireless@vger.kernel.org CC: linux-ide@vger.kernel.org CC: linux-usb@vger.kernel.org CC: laforge@gnumonks.org CC: linux-mtd@lists.infradead.org CC: alsa-devel@alsa-project.org CC: linux-serial@vger.kernel.org CC: Michael Buesch <mb@bu3sch.de> Acked-by: Marcel Holtmann <marcel@holtmann.org> (for drivers/bluetooth/) Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
		
			
				
	
	
		
			798 lines
		
	
	
	
		
			16 KiB
			
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			798 lines
		
	
	
	
		
			16 KiB
			
		
	
	
	
		
			C
		
	
	
	
	
	
| /*
 | |
|  *
 | |
|  *  Driver for the 3Com Bluetooth PCMCIA card
 | |
|  *
 | |
|  *  Copyright (C) 2001-2002  Marcel Holtmann <marcel@holtmann.org>
 | |
|  *                           Jose Orlando Pereira <jop@di.uminho.pt>
 | |
|  *
 | |
|  *
 | |
|  *  This program is free software; you can redistribute it and/or modify
 | |
|  *  it under the terms of the GNU General Public License version 2 as
 | |
|  *  published by the Free Software Foundation;
 | |
|  *
 | |
|  *  Software distributed under the License is distributed on an "AS
 | |
|  *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
 | |
|  *  implied. See the License for the specific language governing
 | |
|  *  rights and limitations under the License.
 | |
|  *
 | |
|  *  The initial developer of the original code is David A. Hinds
 | |
|  *  <dahinds@users.sourceforge.net>.  Portions created by David A. Hinds
 | |
|  *  are Copyright (C) 1999 David A. Hinds.  All Rights Reserved.
 | |
|  *
 | |
|  */
 | |
| 
 | |
| #include <linux/module.h>
 | |
| 
 | |
| #include <linux/kernel.h>
 | |
| #include <linux/init.h>
 | |
| #include <linux/slab.h>
 | |
| #include <linux/types.h>
 | |
| #include <linux/delay.h>
 | |
| #include <linux/errno.h>
 | |
| #include <linux/ptrace.h>
 | |
| #include <linux/ioport.h>
 | |
| #include <linux/spinlock.h>
 | |
| #include <linux/moduleparam.h>
 | |
| 
 | |
| #include <linux/skbuff.h>
 | |
| #include <linux/string.h>
 | |
| #include <linux/serial.h>
 | |
| #include <linux/serial_reg.h>
 | |
| #include <linux/bitops.h>
 | |
| #include <asm/system.h>
 | |
| #include <asm/io.h>
 | |
| 
 | |
| #include <linux/device.h>
 | |
| #include <linux/firmware.h>
 | |
| 
 | |
| #include <pcmcia/cs.h>
 | |
| #include <pcmcia/cistpl.h>
 | |
| #include <pcmcia/ciscode.h>
 | |
| #include <pcmcia/ds.h>
 | |
| #include <pcmcia/cisreg.h>
 | |
| 
 | |
| #include <net/bluetooth/bluetooth.h>
 | |
| #include <net/bluetooth/hci_core.h>
 | |
| 
 | |
| 
 | |
| 
 | |
| /* ======================== Module parameters ======================== */
 | |
| 
 | |
| 
 | |
| MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
 | |
| MODULE_DESCRIPTION("Bluetooth driver for the 3Com Bluetooth PCMCIA card");
 | |
| MODULE_LICENSE("GPL");
 | |
| MODULE_FIRMWARE("BT3CPCC.bin");
 | |
| 
 | |
| 
 | |
| 
 | |
| /* ======================== Local structures ======================== */
 | |
| 
 | |
| 
 | |
| typedef struct bt3c_info_t {
 | |
| 	struct pcmcia_device *p_dev;
 | |
| 
 | |
| 	struct hci_dev *hdev;
 | |
| 
 | |
| 	spinlock_t lock;		/* For serializing operations */
 | |
| 
 | |
| 	struct sk_buff_head txq;
 | |
| 	unsigned long tx_state;
 | |
| 
 | |
| 	unsigned long rx_state;
 | |
| 	unsigned long rx_count;
 | |
| 	struct sk_buff *rx_skb;
 | |
| } bt3c_info_t;
 | |
| 
 | |
| 
 | |
| static int bt3c_config(struct pcmcia_device *link);
 | |
| static void bt3c_release(struct pcmcia_device *link);
 | |
| 
 | |
| static void bt3c_detach(struct pcmcia_device *p_dev);
 | |
| 
 | |
| 
 | |
| /* Transmit states  */
 | |
| #define XMIT_SENDING  1
 | |
| #define XMIT_WAKEUP   2
 | |
| #define XMIT_WAITING  8
 | |
| 
 | |
| /* Receiver states */
 | |
| #define RECV_WAIT_PACKET_TYPE   0
 | |
| #define RECV_WAIT_EVENT_HEADER  1
 | |
| #define RECV_WAIT_ACL_HEADER    2
 | |
| #define RECV_WAIT_SCO_HEADER    3
 | |
| #define RECV_WAIT_DATA          4
 | |
| 
 | |
| 
 | |
| 
 | |
| /* ======================== Special I/O functions ======================== */
 | |
| 
 | |
| 
 | |
| #define DATA_L   0
 | |
| #define DATA_H   1
 | |
| #define ADDR_L   2
 | |
| #define ADDR_H   3
 | |
| #define CONTROL  4
 | |
| 
 | |
| 
 | |
| static inline void bt3c_address(unsigned int iobase, unsigned short addr)
 | |
| {
 | |
| 	outb(addr & 0xff, iobase + ADDR_L);
 | |
| 	outb((addr >> 8) & 0xff, iobase + ADDR_H);
 | |
| }
 | |
| 
 | |
| 
 | |
| static inline void bt3c_put(unsigned int iobase, unsigned short value)
 | |
| {
 | |
| 	outb(value & 0xff, iobase + DATA_L);
 | |
| 	outb((value >> 8) & 0xff, iobase + DATA_H);
 | |
| }
 | |
| 
 | |
| 
 | |
| static inline void bt3c_io_write(unsigned int iobase, unsigned short addr, unsigned short value)
 | |
| {
 | |
| 	bt3c_address(iobase, addr);
 | |
| 	bt3c_put(iobase, value);
 | |
| }
 | |
| 
 | |
| 
 | |
| static inline unsigned short bt3c_get(unsigned int iobase)
 | |
| {
 | |
| 	unsigned short value = inb(iobase + DATA_L);
 | |
| 
 | |
| 	value |= inb(iobase + DATA_H) << 8;
 | |
| 
 | |
| 	return value;
 | |
| }
 | |
| 
 | |
| 
 | |
| static inline unsigned short bt3c_read(unsigned int iobase, unsigned short addr)
 | |
| {
 | |
| 	bt3c_address(iobase, addr);
 | |
| 
 | |
| 	return bt3c_get(iobase);
 | |
| }
 | |
| 
 | |
| 
 | |
| 
 | |
| /* ======================== Interrupt handling ======================== */
 | |
| 
 | |
| 
 | |
| static int bt3c_write(unsigned int iobase, int fifo_size, __u8 *buf, int len)
 | |
| {
 | |
| 	int actual = 0;
 | |
| 
 | |
| 	bt3c_address(iobase, 0x7080);
 | |
| 
 | |
| 	/* Fill FIFO with current frame */
 | |
| 	while (actual < len) {
 | |
| 		/* Transmit next byte */
 | |
| 		bt3c_put(iobase, buf[actual]);
 | |
| 		actual++;
 | |
| 	}
 | |
| 
 | |
| 	bt3c_io_write(iobase, 0x7005, actual);
 | |
| 
 | |
| 	return actual;
 | |
| }
 | |
| 
 | |
| 
 | |
| static void bt3c_write_wakeup(bt3c_info_t *info)
 | |
| {
 | |
| 	if (!info) {
 | |
| 		BT_ERR("Unknown device");
 | |
| 		return;
 | |
| 	}
 | |
| 
 | |
| 	if (test_and_set_bit(XMIT_SENDING, &(info->tx_state)))
 | |
| 		return;
 | |
| 
 | |
| 	do {
 | |
| 		register unsigned int iobase = info->p_dev->resource[0]->start;
 | |
| 		register struct sk_buff *skb;
 | |
| 		register int len;
 | |
| 
 | |
| 		if (!pcmcia_dev_present(info->p_dev))
 | |
| 			break;
 | |
| 
 | |
| 
 | |
| 		if (!(skb = skb_dequeue(&(info->txq)))) {
 | |
| 			clear_bit(XMIT_SENDING, &(info->tx_state));
 | |
| 			break;
 | |
| 		}
 | |
| 
 | |
| 		/* Send frame */
 | |
| 		len = bt3c_write(iobase, 256, skb->data, skb->len);
 | |
| 
 | |
| 		if (len != skb->len) {
 | |
| 			BT_ERR("Very strange");
 | |
| 		}
 | |
| 
 | |
| 		kfree_skb(skb);
 | |
| 
 | |
| 		info->hdev->stat.byte_tx += len;
 | |
| 
 | |
| 	} while (0);
 | |
| }
 | |
| 
 | |
| 
 | |
| static void bt3c_receive(bt3c_info_t *info)
 | |
| {
 | |
| 	unsigned int iobase;
 | |
| 	int size = 0, avail;
 | |
| 
 | |
| 	if (!info) {
 | |
| 		BT_ERR("Unknown device");
 | |
| 		return;
 | |
| 	}
 | |
| 
 | |
| 	iobase = info->p_dev->resource[0]->start;
 | |
| 
 | |
| 	avail = bt3c_read(iobase, 0x7006);
 | |
| 	//printk("bt3c_cs: receiving %d bytes\n", avail);
 | |
| 
 | |
| 	bt3c_address(iobase, 0x7480);
 | |
| 	while (size < avail) {
 | |
| 		size++;
 | |
| 		info->hdev->stat.byte_rx++;
 | |
| 
 | |
| 		/* Allocate packet */
 | |
| 		if (info->rx_skb == NULL) {
 | |
| 			info->rx_state = RECV_WAIT_PACKET_TYPE;
 | |
| 			info->rx_count = 0;
 | |
| 			if (!(info->rx_skb = bt_skb_alloc(HCI_MAX_FRAME_SIZE, GFP_ATOMIC))) {
 | |
| 				BT_ERR("Can't allocate mem for new packet");
 | |
| 				return;
 | |
| 			}
 | |
| 		}
 | |
| 
 | |
| 
 | |
| 		if (info->rx_state == RECV_WAIT_PACKET_TYPE) {
 | |
| 
 | |
| 			info->rx_skb->dev = (void *) info->hdev;
 | |
| 			bt_cb(info->rx_skb)->pkt_type = inb(iobase + DATA_L);
 | |
| 			inb(iobase + DATA_H);
 | |
| 			//printk("bt3c: PACKET_TYPE=%02x\n", bt_cb(info->rx_skb)->pkt_type);
 | |
| 
 | |
| 			switch (bt_cb(info->rx_skb)->pkt_type) {
 | |
| 
 | |
| 			case HCI_EVENT_PKT:
 | |
| 				info->rx_state = RECV_WAIT_EVENT_HEADER;
 | |
| 				info->rx_count = HCI_EVENT_HDR_SIZE;
 | |
| 				break;
 | |
| 
 | |
| 			case HCI_ACLDATA_PKT:
 | |
| 				info->rx_state = RECV_WAIT_ACL_HEADER;
 | |
| 				info->rx_count = HCI_ACL_HDR_SIZE;
 | |
| 				break;
 | |
| 
 | |
| 			case HCI_SCODATA_PKT:
 | |
| 				info->rx_state = RECV_WAIT_SCO_HEADER;
 | |
| 				info->rx_count = HCI_SCO_HDR_SIZE;
 | |
| 				break;
 | |
| 
 | |
| 			default:
 | |
| 				/* Unknown packet */
 | |
| 				BT_ERR("Unknown HCI packet with type 0x%02x received", bt_cb(info->rx_skb)->pkt_type);
 | |
| 				info->hdev->stat.err_rx++;
 | |
| 				clear_bit(HCI_RUNNING, &(info->hdev->flags));
 | |
| 
 | |
| 				kfree_skb(info->rx_skb);
 | |
| 				info->rx_skb = NULL;
 | |
| 				break;
 | |
| 
 | |
| 			}
 | |
| 
 | |
| 		} else {
 | |
| 
 | |
| 			__u8 x = inb(iobase + DATA_L);
 | |
| 
 | |
| 			*skb_put(info->rx_skb, 1) = x;
 | |
| 			inb(iobase + DATA_H);
 | |
| 			info->rx_count--;
 | |
| 
 | |
| 			if (info->rx_count == 0) {
 | |
| 
 | |
| 				int dlen;
 | |
| 				struct hci_event_hdr *eh;
 | |
| 				struct hci_acl_hdr *ah;
 | |
| 				struct hci_sco_hdr *sh;
 | |
| 
 | |
| 				switch (info->rx_state) {
 | |
| 
 | |
| 				case RECV_WAIT_EVENT_HEADER:
 | |
| 					eh = hci_event_hdr(info->rx_skb);
 | |
| 					info->rx_state = RECV_WAIT_DATA;
 | |
| 					info->rx_count = eh->plen;
 | |
| 					break;
 | |
| 
 | |
| 				case RECV_WAIT_ACL_HEADER:
 | |
| 					ah = hci_acl_hdr(info->rx_skb);
 | |
| 					dlen = __le16_to_cpu(ah->dlen);
 | |
| 					info->rx_state = RECV_WAIT_DATA;
 | |
| 					info->rx_count = dlen;
 | |
| 					break;
 | |
| 
 | |
| 				case RECV_WAIT_SCO_HEADER:
 | |
| 					sh = hci_sco_hdr(info->rx_skb);
 | |
| 					info->rx_state = RECV_WAIT_DATA;
 | |
| 					info->rx_count = sh->dlen;
 | |
| 					break;
 | |
| 
 | |
| 				case RECV_WAIT_DATA:
 | |
| 					hci_recv_frame(info->rx_skb);
 | |
| 					info->rx_skb = NULL;
 | |
| 					break;
 | |
| 
 | |
| 				}
 | |
| 
 | |
| 			}
 | |
| 
 | |
| 		}
 | |
| 
 | |
| 	}
 | |
| 
 | |
| 	bt3c_io_write(iobase, 0x7006, 0x0000);
 | |
| }
 | |
| 
 | |
| 
 | |
| static irqreturn_t bt3c_interrupt(int irq, void *dev_inst)
 | |
| {
 | |
| 	bt3c_info_t *info = dev_inst;
 | |
| 	unsigned int iobase;
 | |
| 	int iir;
 | |
| 	irqreturn_t r = IRQ_NONE;
 | |
| 
 | |
| 	if (!info || !info->hdev)
 | |
| 		/* our irq handler is shared */
 | |
| 		return IRQ_NONE;
 | |
| 
 | |
| 	iobase = info->p_dev->resource[0]->start;
 | |
| 
 | |
| 	spin_lock(&(info->lock));
 | |
| 
 | |
| 	iir = inb(iobase + CONTROL);
 | |
| 	if (iir & 0x80) {
 | |
| 		int stat = bt3c_read(iobase, 0x7001);
 | |
| 
 | |
| 		if ((stat & 0xff) == 0x7f) {
 | |
| 			BT_ERR("Very strange (stat=0x%04x)", stat);
 | |
| 		} else if ((stat & 0xff) != 0xff) {
 | |
| 			if (stat & 0x0020) {
 | |
| 				int status = bt3c_read(iobase, 0x7002) & 0x10;
 | |
| 				BT_INFO("%s: Antenna %s", info->hdev->name,
 | |
| 							status ? "out" : "in");
 | |
| 			}
 | |
| 			if (stat & 0x0001)
 | |
| 				bt3c_receive(info);
 | |
| 			if (stat & 0x0002) {
 | |
| 				//BT_ERR("Ack (stat=0x%04x)", stat);
 | |
| 				clear_bit(XMIT_SENDING, &(info->tx_state));
 | |
| 				bt3c_write_wakeup(info);
 | |
| 			}
 | |
| 
 | |
| 			bt3c_io_write(iobase, 0x7001, 0x0000);
 | |
| 
 | |
| 			outb(iir, iobase + CONTROL);
 | |
| 		}
 | |
| 		r = IRQ_HANDLED;
 | |
| 	}
 | |
| 
 | |
| 	spin_unlock(&(info->lock));
 | |
| 
 | |
| 	return r;
 | |
| }
 | |
| 
 | |
| 
 | |
| 
 | |
| /* ======================== HCI interface ======================== */
 | |
| 
 | |
| 
 | |
| static int bt3c_hci_flush(struct hci_dev *hdev)
 | |
| {
 | |
| 	bt3c_info_t *info = (bt3c_info_t *)(hdev->driver_data);
 | |
| 
 | |
| 	/* Drop TX queue */
 | |
| 	skb_queue_purge(&(info->txq));
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| 
 | |
| static int bt3c_hci_open(struct hci_dev *hdev)
 | |
| {
 | |
| 	set_bit(HCI_RUNNING, &(hdev->flags));
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| 
 | |
| static int bt3c_hci_close(struct hci_dev *hdev)
 | |
| {
 | |
| 	if (!test_and_clear_bit(HCI_RUNNING, &(hdev->flags)))
 | |
| 		return 0;
 | |
| 
 | |
| 	bt3c_hci_flush(hdev);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| 
 | |
| static int bt3c_hci_send_frame(struct sk_buff *skb)
 | |
| {
 | |
| 	bt3c_info_t *info;
 | |
| 	struct hci_dev *hdev = (struct hci_dev *)(skb->dev);
 | |
| 	unsigned long flags;
 | |
| 
 | |
| 	if (!hdev) {
 | |
| 		BT_ERR("Frame for unknown HCI device (hdev=NULL)");
 | |
| 		return -ENODEV;
 | |
| 	}
 | |
| 
 | |
| 	info = (bt3c_info_t *) (hdev->driver_data);
 | |
| 
 | |
| 	switch (bt_cb(skb)->pkt_type) {
 | |
| 	case HCI_COMMAND_PKT:
 | |
| 		hdev->stat.cmd_tx++;
 | |
| 		break;
 | |
| 	case HCI_ACLDATA_PKT:
 | |
| 		hdev->stat.acl_tx++;
 | |
| 		break;
 | |
| 	case HCI_SCODATA_PKT:
 | |
| 		hdev->stat.sco_tx++;
 | |
| 		break;
 | |
| 	};
 | |
| 
 | |
| 	/* Prepend skb with frame type */
 | |
| 	memcpy(skb_push(skb, 1), &bt_cb(skb)->pkt_type, 1);
 | |
| 	skb_queue_tail(&(info->txq), skb);
 | |
| 
 | |
| 	spin_lock_irqsave(&(info->lock), flags);
 | |
| 
 | |
| 	bt3c_write_wakeup(info);
 | |
| 
 | |
| 	spin_unlock_irqrestore(&(info->lock), flags);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| 
 | |
| static void bt3c_hci_destruct(struct hci_dev *hdev)
 | |
| {
 | |
| }
 | |
| 
 | |
| 
 | |
| static int bt3c_hci_ioctl(struct hci_dev *hdev, unsigned int cmd, unsigned long arg)
 | |
| {
 | |
| 	return -ENOIOCTLCMD;
 | |
| }
 | |
| 
 | |
| 
 | |
| 
 | |
| /* ======================== Card services HCI interaction ======================== */
 | |
| 
 | |
| 
 | |
| static int bt3c_load_firmware(bt3c_info_t *info, const unsigned char *firmware,
 | |
| 			      int count)
 | |
| {
 | |
| 	char *ptr = (char *) firmware;
 | |
| 	char b[9];
 | |
| 	unsigned int iobase, size, addr, fcs, tmp;
 | |
| 	int i, err = 0;
 | |
| 
 | |
| 	iobase = info->p_dev->resource[0]->start;
 | |
| 
 | |
| 	/* Reset */
 | |
| 	bt3c_io_write(iobase, 0x8040, 0x0404);
 | |
| 	bt3c_io_write(iobase, 0x8040, 0x0400);
 | |
| 
 | |
| 	udelay(1);
 | |
| 
 | |
| 	bt3c_io_write(iobase, 0x8040, 0x0404);
 | |
| 
 | |
| 	udelay(17);
 | |
| 
 | |
| 	/* Load */
 | |
| 	while (count) {
 | |
| 		if (ptr[0] != 'S') {
 | |
| 			BT_ERR("Bad address in firmware");
 | |
| 			err = -EFAULT;
 | |
| 			goto error;
 | |
| 		}
 | |
| 
 | |
| 		memset(b, 0, sizeof(b));
 | |
| 		memcpy(b, ptr + 2, 2);
 | |
| 		size = simple_strtoul(b, NULL, 16);
 | |
| 
 | |
| 		memset(b, 0, sizeof(b));
 | |
| 		memcpy(b, ptr + 4, 8);
 | |
| 		addr = simple_strtoul(b, NULL, 16);
 | |
| 
 | |
| 		memset(b, 0, sizeof(b));
 | |
| 		memcpy(b, ptr + (size * 2) + 2, 2);
 | |
| 		fcs = simple_strtoul(b, NULL, 16);
 | |
| 
 | |
| 		memset(b, 0, sizeof(b));
 | |
| 		for (tmp = 0, i = 0; i < size; i++) {
 | |
| 			memcpy(b, ptr + (i * 2) + 2, 2);
 | |
| 			tmp += simple_strtol(b, NULL, 16);
 | |
| 		}
 | |
| 
 | |
| 		if (((tmp + fcs) & 0xff) != 0xff) {
 | |
| 			BT_ERR("Checksum error in firmware");
 | |
| 			err = -EILSEQ;
 | |
| 			goto error;
 | |
| 		}
 | |
| 
 | |
| 		if (ptr[1] == '3') {
 | |
| 			bt3c_address(iobase, addr);
 | |
| 
 | |
| 			memset(b, 0, sizeof(b));
 | |
| 			for (i = 0; i < (size - 4) / 2; i++) {
 | |
| 				memcpy(b, ptr + (i * 4) + 12, 4);
 | |
| 				tmp = simple_strtoul(b, NULL, 16);
 | |
| 				bt3c_put(iobase, tmp);
 | |
| 			}
 | |
| 		}
 | |
| 
 | |
| 		ptr   += (size * 2) + 6;
 | |
| 		count -= (size * 2) + 6;
 | |
| 	}
 | |
| 
 | |
| 	udelay(17);
 | |
| 
 | |
| 	/* Boot */
 | |
| 	bt3c_address(iobase, 0x3000);
 | |
| 	outb(inb(iobase + CONTROL) | 0x40, iobase + CONTROL);
 | |
| 
 | |
| error:
 | |
| 	udelay(17);
 | |
| 
 | |
| 	/* Clear */
 | |
| 	bt3c_io_write(iobase, 0x7006, 0x0000);
 | |
| 	bt3c_io_write(iobase, 0x7005, 0x0000);
 | |
| 	bt3c_io_write(iobase, 0x7001, 0x0000);
 | |
| 
 | |
| 	return err;
 | |
| }
 | |
| 
 | |
| 
 | |
| static int bt3c_open(bt3c_info_t *info)
 | |
| {
 | |
| 	const struct firmware *firmware;
 | |
| 	struct hci_dev *hdev;
 | |
| 	int err;
 | |
| 
 | |
| 	spin_lock_init(&(info->lock));
 | |
| 
 | |
| 	skb_queue_head_init(&(info->txq));
 | |
| 
 | |
| 	info->rx_state = RECV_WAIT_PACKET_TYPE;
 | |
| 	info->rx_count = 0;
 | |
| 	info->rx_skb = NULL;
 | |
| 
 | |
| 	/* Initialize HCI device */
 | |
| 	hdev = hci_alloc_dev();
 | |
| 	if (!hdev) {
 | |
| 		BT_ERR("Can't allocate HCI device");
 | |
| 		return -ENOMEM;
 | |
| 	}
 | |
| 
 | |
| 	info->hdev = hdev;
 | |
| 
 | |
| 	hdev->bus = HCI_PCCARD;
 | |
| 	hdev->driver_data = info;
 | |
| 	SET_HCIDEV_DEV(hdev, &info->p_dev->dev);
 | |
| 
 | |
| 	hdev->open     = bt3c_hci_open;
 | |
| 	hdev->close    = bt3c_hci_close;
 | |
| 	hdev->flush    = bt3c_hci_flush;
 | |
| 	hdev->send     = bt3c_hci_send_frame;
 | |
| 	hdev->destruct = bt3c_hci_destruct;
 | |
| 	hdev->ioctl    = bt3c_hci_ioctl;
 | |
| 
 | |
| 	hdev->owner = THIS_MODULE;
 | |
| 
 | |
| 	/* Load firmware */
 | |
| 	err = request_firmware(&firmware, "BT3CPCC.bin", &info->p_dev->dev);
 | |
| 	if (err < 0) {
 | |
| 		BT_ERR("Firmware request failed");
 | |
| 		goto error;
 | |
| 	}
 | |
| 
 | |
| 	err = bt3c_load_firmware(info, firmware->data, firmware->size);
 | |
| 
 | |
| 	release_firmware(firmware);
 | |
| 
 | |
| 	if (err < 0) {
 | |
| 		BT_ERR("Firmware loading failed");
 | |
| 		goto error;
 | |
| 	}
 | |
| 
 | |
| 	/* Timeout before it is safe to send the first HCI packet */
 | |
| 	msleep(1000);
 | |
| 
 | |
| 	/* Register HCI device */
 | |
| 	err = hci_register_dev(hdev);
 | |
| 	if (err < 0) {
 | |
| 		BT_ERR("Can't register HCI device");
 | |
| 		goto error;
 | |
| 	}
 | |
| 
 | |
| 	return 0;
 | |
| 
 | |
| error:
 | |
| 	info->hdev = NULL;
 | |
| 	hci_free_dev(hdev);
 | |
| 	return err;
 | |
| }
 | |
| 
 | |
| 
 | |
| static int bt3c_close(bt3c_info_t *info)
 | |
| {
 | |
| 	struct hci_dev *hdev = info->hdev;
 | |
| 
 | |
| 	if (!hdev)
 | |
| 		return -ENODEV;
 | |
| 
 | |
| 	bt3c_hci_close(hdev);
 | |
| 
 | |
| 	if (hci_unregister_dev(hdev) < 0)
 | |
| 		BT_ERR("Can't unregister HCI device %s", hdev->name);
 | |
| 
 | |
| 	hci_free_dev(hdev);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int bt3c_probe(struct pcmcia_device *link)
 | |
| {
 | |
| 	bt3c_info_t *info;
 | |
| 
 | |
| 	/* Create new info device */
 | |
| 	info = kzalloc(sizeof(*info), GFP_KERNEL);
 | |
| 	if (!info)
 | |
| 		return -ENOMEM;
 | |
| 
 | |
| 	info->p_dev = link;
 | |
| 	link->priv = info;
 | |
| 
 | |
| 	link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
 | |
| 	link->resource[0]->end = 8;
 | |
| 
 | |
| 	link->conf.Attributes = CONF_ENABLE_IRQ;
 | |
| 	link->conf.IntType = INT_MEMORY_AND_IO;
 | |
| 
 | |
| 	return bt3c_config(link);
 | |
| }
 | |
| 
 | |
| 
 | |
| static void bt3c_detach(struct pcmcia_device *link)
 | |
| {
 | |
| 	bt3c_info_t *info = link->priv;
 | |
| 
 | |
| 	bt3c_release(link);
 | |
| 	kfree(info);
 | |
| }
 | |
| 
 | |
| static int bt3c_check_config(struct pcmcia_device *p_dev,
 | |
| 			     cistpl_cftable_entry_t *cf,
 | |
| 			     cistpl_cftable_entry_t *dflt,
 | |
| 			     unsigned int vcc,
 | |
| 			     void *priv_data)
 | |
| {
 | |
| 	unsigned long try = (unsigned long) priv_data;
 | |
| 
 | |
| 	p_dev->io_lines = (try == 0) ? 16 : cf->io.flags & CISTPL_IO_LINES_MASK;
 | |
| 
 | |
| 	if (cf->vpp1.present & (1 << CISTPL_POWER_VNOM))
 | |
| 		p_dev->conf.Vpp = cf->vpp1.param[CISTPL_POWER_VNOM] / 10000;
 | |
| 	if ((cf->io.nwin > 0) && (cf->io.win[0].len == 8) &&
 | |
| 	    (cf->io.win[0].base != 0)) {
 | |
| 		p_dev->resource[0]->start = cf->io.win[0].base;
 | |
| 		if (!pcmcia_request_io(p_dev))
 | |
| 			return 0;
 | |
| 	}
 | |
| 	return -ENODEV;
 | |
| }
 | |
| 
 | |
| static int bt3c_check_config_notpicky(struct pcmcia_device *p_dev,
 | |
| 				      cistpl_cftable_entry_t *cf,
 | |
| 				      cistpl_cftable_entry_t *dflt,
 | |
| 				      unsigned int vcc,
 | |
| 				      void *priv_data)
 | |
| {
 | |
| 	static unsigned int base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 };
 | |
| 	int j;
 | |
| 
 | |
| 	if ((cf->io.nwin > 0) && ((cf->io.flags & CISTPL_IO_LINES_MASK) <= 3)) {
 | |
| 		for (j = 0; j < 5; j++) {
 | |
| 			p_dev->resource[0]->start = base[j];
 | |
| 			p_dev->io_lines = base[j] ? 16 : 3;
 | |
| 			if (!pcmcia_request_io(p_dev))
 | |
| 				return 0;
 | |
| 		}
 | |
| 	}
 | |
| 	return -ENODEV;
 | |
| }
 | |
| 
 | |
| static int bt3c_config(struct pcmcia_device *link)
 | |
| {
 | |
| 	bt3c_info_t *info = link->priv;
 | |
| 	int i;
 | |
| 	unsigned long try;
 | |
| 
 | |
| 	/* First pass: look for a config entry that looks normal.
 | |
| 	   Two tries: without IO aliases, then with aliases */
 | |
| 	for (try = 0; try < 2; try++)
 | |
| 		if (!pcmcia_loop_config(link, bt3c_check_config, (void *) try))
 | |
| 			goto found_port;
 | |
| 
 | |
| 	/* Second pass: try to find an entry that isn't picky about
 | |
| 	   its base address, then try to grab any standard serial port
 | |
| 	   address, and finally try to get any free port. */
 | |
| 	if (!pcmcia_loop_config(link, bt3c_check_config_notpicky, NULL))
 | |
| 		goto found_port;
 | |
| 
 | |
| 	BT_ERR("No usable port range found");
 | |
| 	goto failed;
 | |
| 
 | |
| found_port:
 | |
| 	i = pcmcia_request_irq(link, &bt3c_interrupt);
 | |
| 	if (i != 0)
 | |
| 		goto failed;
 | |
| 
 | |
| 	i = pcmcia_request_configuration(link, &link->conf);
 | |
| 	if (i != 0)
 | |
| 		goto failed;
 | |
| 
 | |
| 	if (bt3c_open(info) != 0)
 | |
| 		goto failed;
 | |
| 
 | |
| 	return 0;
 | |
| 
 | |
| failed:
 | |
| 	bt3c_release(link);
 | |
| 	return -ENODEV;
 | |
| }
 | |
| 
 | |
| 
 | |
| static void bt3c_release(struct pcmcia_device *link)
 | |
| {
 | |
| 	bt3c_info_t *info = link->priv;
 | |
| 
 | |
| 	bt3c_close(info);
 | |
| 
 | |
| 	pcmcia_disable_device(link);
 | |
| }
 | |
| 
 | |
| 
 | |
| static struct pcmcia_device_id bt3c_ids[] = {
 | |
| 	PCMCIA_DEVICE_PROD_ID13("3COM", "Bluetooth PC Card", 0xefce0a31, 0xd4ce9b02),
 | |
| 	PCMCIA_DEVICE_NULL
 | |
| };
 | |
| MODULE_DEVICE_TABLE(pcmcia, bt3c_ids);
 | |
| 
 | |
| static struct pcmcia_driver bt3c_driver = {
 | |
| 	.owner		= THIS_MODULE,
 | |
| 	.drv		= {
 | |
| 		.name	= "bt3c_cs",
 | |
| 	},
 | |
| 	.probe		= bt3c_probe,
 | |
| 	.remove		= bt3c_detach,
 | |
| 	.id_table	= bt3c_ids,
 | |
| };
 | |
| 
 | |
| static int __init init_bt3c_cs(void)
 | |
| {
 | |
| 	return pcmcia_register_driver(&bt3c_driver);
 | |
| }
 | |
| 
 | |
| 
 | |
| static void __exit exit_bt3c_cs(void)
 | |
| {
 | |
| 	pcmcia_unregister_driver(&bt3c_driver);
 | |
| }
 | |
| 
 | |
| module_init(init_bt3c_cs);
 | |
| module_exit(exit_bt3c_cs);
 |