 72fca4a4b3
			
		
	
	
	72fca4a4b3
	
	
	
		
			
			Previously the alarm event was not propagated into the RTC subsystem. By adding a call to rtc_update_irq, this fixes a timeout problem with the hwclock utility. Signed-off-by: Jan Luebbe <jlu@pengutronix.de> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
		
			
				
	
	
		
			734 lines
		
	
	
	
		
			18 KiB
			
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			734 lines
		
	
	
	
		
			18 KiB
			
		
	
	
	
		
			C
		
	
	
	
	
	
| /*
 | |
|  * Intersil ISL1208 rtc class driver
 | |
|  *
 | |
|  * Copyright 2005,2006 Hebert Valerio Riedel <hvr@gnu.org>
 | |
|  *
 | |
|  *  This program is free software; you can redistribute  it and/or modify it
 | |
|  *  under  the terms of  the GNU General  Public License as published by the
 | |
|  *  Free Software Foundation;  either version 2 of the  License, or (at your
 | |
|  *  option) any later version.
 | |
|  *
 | |
|  */
 | |
| 
 | |
| #include <linux/module.h>
 | |
| #include <linux/i2c.h>
 | |
| #include <linux/bcd.h>
 | |
| #include <linux/rtc.h>
 | |
| 
 | |
| #define DRV_VERSION "0.3"
 | |
| 
 | |
| /* Register map */
 | |
| /* rtc section */
 | |
| #define ISL1208_REG_SC  0x00
 | |
| #define ISL1208_REG_MN  0x01
 | |
| #define ISL1208_REG_HR  0x02
 | |
| #define ISL1208_REG_HR_MIL     (1<<7)	/* 24h/12h mode */
 | |
| #define ISL1208_REG_HR_PM      (1<<5)	/* PM/AM bit in 12h mode */
 | |
| #define ISL1208_REG_DT  0x03
 | |
| #define ISL1208_REG_MO  0x04
 | |
| #define ISL1208_REG_YR  0x05
 | |
| #define ISL1208_REG_DW  0x06
 | |
| #define ISL1208_RTC_SECTION_LEN 7
 | |
| 
 | |
| /* control/status section */
 | |
| #define ISL1208_REG_SR  0x07
 | |
| #define ISL1208_REG_SR_ARST    (1<<7)	/* auto reset */
 | |
| #define ISL1208_REG_SR_XTOSCB  (1<<6)	/* crystal oscillator */
 | |
| #define ISL1208_REG_SR_WRTC    (1<<4)	/* write rtc */
 | |
| #define ISL1208_REG_SR_ALM     (1<<2)	/* alarm */
 | |
| #define ISL1208_REG_SR_BAT     (1<<1)	/* battery */
 | |
| #define ISL1208_REG_SR_RTCF    (1<<0)	/* rtc fail */
 | |
| #define ISL1208_REG_INT 0x08
 | |
| #define ISL1208_REG_INT_ALME   (1<<6)   /* alarm enable */
 | |
| #define ISL1208_REG_INT_IM     (1<<7)   /* interrupt/alarm mode */
 | |
| #define ISL1208_REG_09  0x09	/* reserved */
 | |
| #define ISL1208_REG_ATR 0x0a
 | |
| #define ISL1208_REG_DTR 0x0b
 | |
| 
 | |
| /* alarm section */
 | |
| #define ISL1208_REG_SCA 0x0c
 | |
| #define ISL1208_REG_MNA 0x0d
 | |
| #define ISL1208_REG_HRA 0x0e
 | |
| #define ISL1208_REG_DTA 0x0f
 | |
| #define ISL1208_REG_MOA 0x10
 | |
| #define ISL1208_REG_DWA 0x11
 | |
| #define ISL1208_ALARM_SECTION_LEN 6
 | |
| 
 | |
| /* user section */
 | |
| #define ISL1208_REG_USR1 0x12
 | |
| #define ISL1208_REG_USR2 0x13
 | |
| #define ISL1208_USR_SECTION_LEN 2
 | |
| 
 | |
| static struct i2c_driver isl1208_driver;
 | |
| 
 | |
| /* block read */
 | |
| static int
 | |
| isl1208_i2c_read_regs(struct i2c_client *client, u8 reg, u8 buf[],
 | |
| 		      unsigned len)
 | |
| {
 | |
| 	u8 reg_addr[1] = { reg };
 | |
| 	struct i2c_msg msgs[2] = {
 | |
| 		{
 | |
| 			.addr = client->addr,
 | |
| 			.len = sizeof(reg_addr),
 | |
| 			.buf = reg_addr
 | |
| 		},
 | |
| 		{
 | |
| 			.addr = client->addr,
 | |
| 			.flags = I2C_M_RD,
 | |
| 			.len = len,
 | |
| 			.buf = buf
 | |
| 		}
 | |
| 	};
 | |
| 	int ret;
 | |
| 
 | |
| 	BUG_ON(reg > ISL1208_REG_USR2);
 | |
| 	BUG_ON(reg + len > ISL1208_REG_USR2 + 1);
 | |
| 
 | |
| 	ret = i2c_transfer(client->adapter, msgs, 2);
 | |
| 	if (ret > 0)
 | |
| 		ret = 0;
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| /* block write */
 | |
| static int
 | |
| isl1208_i2c_set_regs(struct i2c_client *client, u8 reg, u8 const buf[],
 | |
| 		     unsigned len)
 | |
| {
 | |
| 	u8 i2c_buf[ISL1208_REG_USR2 + 2];
 | |
| 	struct i2c_msg msgs[1] = {
 | |
| 		{
 | |
| 			.addr = client->addr,
 | |
| 			.len = len + 1,
 | |
| 			.buf = i2c_buf
 | |
| 		}
 | |
| 	};
 | |
| 	int ret;
 | |
| 
 | |
| 	BUG_ON(reg > ISL1208_REG_USR2);
 | |
| 	BUG_ON(reg + len > ISL1208_REG_USR2 + 1);
 | |
| 
 | |
| 	i2c_buf[0] = reg;
 | |
| 	memcpy(&i2c_buf[1], &buf[0], len);
 | |
| 
 | |
| 	ret = i2c_transfer(client->adapter, msgs, 1);
 | |
| 	if (ret > 0)
 | |
| 		ret = 0;
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| /* simple check to see whether we have a isl1208 */
 | |
| static int
 | |
| isl1208_i2c_validate_client(struct i2c_client *client)
 | |
| {
 | |
| 	u8 regs[ISL1208_RTC_SECTION_LEN] = { 0, };
 | |
| 	u8 zero_mask[ISL1208_RTC_SECTION_LEN] = {
 | |
| 		0x80, 0x80, 0x40, 0xc0, 0xe0, 0x00, 0xf8
 | |
| 	};
 | |
| 	int i;
 | |
| 	int ret;
 | |
| 
 | |
| 	ret = isl1208_i2c_read_regs(client, 0, regs, ISL1208_RTC_SECTION_LEN);
 | |
| 	if (ret < 0)
 | |
| 		return ret;
 | |
| 
 | |
| 	for (i = 0; i < ISL1208_RTC_SECTION_LEN; ++i) {
 | |
| 		if (regs[i] & zero_mask[i])	/* check if bits are cleared */
 | |
| 			return -ENODEV;
 | |
| 	}
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int
 | |
| isl1208_i2c_get_sr(struct i2c_client *client)
 | |
| {
 | |
| 	int sr = i2c_smbus_read_byte_data(client, ISL1208_REG_SR);
 | |
| 	if (sr < 0)
 | |
| 		return -EIO;
 | |
| 
 | |
| 	return sr;
 | |
| }
 | |
| 
 | |
| static int
 | |
| isl1208_i2c_get_atr(struct i2c_client *client)
 | |
| {
 | |
| 	int atr = i2c_smbus_read_byte_data(client, ISL1208_REG_ATR);
 | |
| 	if (atr < 0)
 | |
| 		return atr;
 | |
| 
 | |
| 	/* The 6bit value in the ATR register controls the load
 | |
| 	 * capacitance C_load * in steps of 0.25pF
 | |
| 	 *
 | |
| 	 * bit (1<<5) of the ATR register is inverted
 | |
| 	 *
 | |
| 	 * C_load(ATR=0x20) =  4.50pF
 | |
| 	 * C_load(ATR=0x00) = 12.50pF
 | |
| 	 * C_load(ATR=0x1f) = 20.25pF
 | |
| 	 *
 | |
| 	 */
 | |
| 
 | |
| 	atr &= 0x3f;		/* mask out lsb */
 | |
| 	atr ^= 1 << 5;		/* invert 6th bit */
 | |
| 	atr += 2 * 9;		/* add offset of 4.5pF; unit[atr] = 0.25pF */
 | |
| 
 | |
| 	return atr;
 | |
| }
 | |
| 
 | |
| static int
 | |
| isl1208_i2c_get_dtr(struct i2c_client *client)
 | |
| {
 | |
| 	int dtr = i2c_smbus_read_byte_data(client, ISL1208_REG_DTR);
 | |
| 	if (dtr < 0)
 | |
| 		return -EIO;
 | |
| 
 | |
| 	/* dtr encodes adjustments of {-60,-40,-20,0,20,40,60} ppm */
 | |
| 	dtr = ((dtr & 0x3) * 20) * (dtr & (1 << 2) ? -1 : 1);
 | |
| 
 | |
| 	return dtr;
 | |
| }
 | |
| 
 | |
| static int
 | |
| isl1208_i2c_get_usr(struct i2c_client *client)
 | |
| {
 | |
| 	u8 buf[ISL1208_USR_SECTION_LEN] = { 0, };
 | |
| 	int ret;
 | |
| 
 | |
| 	ret = isl1208_i2c_read_regs(client, ISL1208_REG_USR1, buf,
 | |
| 				    ISL1208_USR_SECTION_LEN);
 | |
| 	if (ret < 0)
 | |
| 		return ret;
 | |
| 
 | |
| 	return (buf[1] << 8) | buf[0];
 | |
| }
 | |
| 
 | |
| static int
 | |
| isl1208_i2c_set_usr(struct i2c_client *client, u16 usr)
 | |
| {
 | |
| 	u8 buf[ISL1208_USR_SECTION_LEN];
 | |
| 
 | |
| 	buf[0] = usr & 0xff;
 | |
| 	buf[1] = (usr >> 8) & 0xff;
 | |
| 
 | |
| 	return isl1208_i2c_set_regs(client, ISL1208_REG_USR1, buf,
 | |
| 				    ISL1208_USR_SECTION_LEN);
 | |
| }
 | |
| 
 | |
| static int
 | |
| isl1208_rtc_toggle_alarm(struct i2c_client *client, int enable)
 | |
| {
 | |
| 	int icr = i2c_smbus_read_byte_data(client, ISL1208_REG_INT);
 | |
| 
 | |
| 	if (icr < 0) {
 | |
| 		dev_err(&client->dev, "%s: reading INT failed\n", __func__);
 | |
| 		return icr;
 | |
| 	}
 | |
| 
 | |
| 	if (enable)
 | |
| 		icr |= ISL1208_REG_INT_ALME | ISL1208_REG_INT_IM;
 | |
| 	else
 | |
| 		icr &= ~(ISL1208_REG_INT_ALME | ISL1208_REG_INT_IM);
 | |
| 
 | |
| 	icr = i2c_smbus_write_byte_data(client, ISL1208_REG_INT, icr);
 | |
| 	if (icr < 0) {
 | |
| 		dev_err(&client->dev, "%s: writing INT failed\n", __func__);
 | |
| 		return icr;
 | |
| 	}
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int
 | |
| isl1208_rtc_proc(struct device *dev, struct seq_file *seq)
 | |
| {
 | |
| 	struct i2c_client *const client = to_i2c_client(dev);
 | |
| 	int sr, dtr, atr, usr;
 | |
| 
 | |
| 	sr = isl1208_i2c_get_sr(client);
 | |
| 	if (sr < 0) {
 | |
| 		dev_err(&client->dev, "%s: reading SR failed\n", __func__);
 | |
| 		return sr;
 | |
| 	}
 | |
| 
 | |
| 	seq_printf(seq, "status_reg\t:%s%s%s%s%s%s (0x%.2x)\n",
 | |
| 		   (sr & ISL1208_REG_SR_RTCF) ? " RTCF" : "",
 | |
| 		   (sr & ISL1208_REG_SR_BAT) ? " BAT" : "",
 | |
| 		   (sr & ISL1208_REG_SR_ALM) ? " ALM" : "",
 | |
| 		   (sr & ISL1208_REG_SR_WRTC) ? " WRTC" : "",
 | |
| 		   (sr & ISL1208_REG_SR_XTOSCB) ? " XTOSCB" : "",
 | |
| 		   (sr & ISL1208_REG_SR_ARST) ? " ARST" : "", sr);
 | |
| 
 | |
| 	seq_printf(seq, "batt_status\t: %s\n",
 | |
| 		   (sr & ISL1208_REG_SR_RTCF) ? "bad" : "okay");
 | |
| 
 | |
| 	dtr = isl1208_i2c_get_dtr(client);
 | |
| 	if (dtr >= 0 - 1)
 | |
| 		seq_printf(seq, "digital_trim\t: %d ppm\n", dtr);
 | |
| 
 | |
| 	atr = isl1208_i2c_get_atr(client);
 | |
| 	if (atr >= 0)
 | |
| 		seq_printf(seq, "analog_trim\t: %d.%.2d pF\n",
 | |
| 			   atr >> 2, (atr & 0x3) * 25);
 | |
| 
 | |
| 	usr = isl1208_i2c_get_usr(client);
 | |
| 	if (usr >= 0)
 | |
| 		seq_printf(seq, "user_data\t: 0x%.4x\n", usr);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int
 | |
| isl1208_i2c_read_time(struct i2c_client *client, struct rtc_time *tm)
 | |
| {
 | |
| 	int sr;
 | |
| 	u8 regs[ISL1208_RTC_SECTION_LEN] = { 0, };
 | |
| 
 | |
| 	sr = isl1208_i2c_get_sr(client);
 | |
| 	if (sr < 0) {
 | |
| 		dev_err(&client->dev, "%s: reading SR failed\n", __func__);
 | |
| 		return -EIO;
 | |
| 	}
 | |
| 
 | |
| 	sr = isl1208_i2c_read_regs(client, 0, regs, ISL1208_RTC_SECTION_LEN);
 | |
| 	if (sr < 0) {
 | |
| 		dev_err(&client->dev, "%s: reading RTC section failed\n",
 | |
| 			__func__);
 | |
| 		return sr;
 | |
| 	}
 | |
| 
 | |
| 	tm->tm_sec = bcd2bin(regs[ISL1208_REG_SC]);
 | |
| 	tm->tm_min = bcd2bin(regs[ISL1208_REG_MN]);
 | |
| 
 | |
| 	/* HR field has a more complex interpretation */
 | |
| 	{
 | |
| 		const u8 _hr = regs[ISL1208_REG_HR];
 | |
| 		if (_hr & ISL1208_REG_HR_MIL)	/* 24h format */
 | |
| 			tm->tm_hour = bcd2bin(_hr & 0x3f);
 | |
| 		else {
 | |
| 			/* 12h format */
 | |
| 			tm->tm_hour = bcd2bin(_hr & 0x1f);
 | |
| 			if (_hr & ISL1208_REG_HR_PM)	/* PM flag set */
 | |
| 				tm->tm_hour += 12;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	tm->tm_mday = bcd2bin(regs[ISL1208_REG_DT]);
 | |
| 	tm->tm_mon = bcd2bin(regs[ISL1208_REG_MO]) - 1;	/* rtc starts at 1 */
 | |
| 	tm->tm_year = bcd2bin(regs[ISL1208_REG_YR]) + 100;
 | |
| 	tm->tm_wday = bcd2bin(regs[ISL1208_REG_DW]);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int
 | |
| isl1208_i2c_read_alarm(struct i2c_client *client, struct rtc_wkalrm *alarm)
 | |
| {
 | |
| 	struct rtc_time *const tm = &alarm->time;
 | |
| 	u8 regs[ISL1208_ALARM_SECTION_LEN] = { 0, };
 | |
| 	int icr, yr, sr = isl1208_i2c_get_sr(client);
 | |
| 
 | |
| 	if (sr < 0) {
 | |
| 		dev_err(&client->dev, "%s: reading SR failed\n", __func__);
 | |
| 		return sr;
 | |
| 	}
 | |
| 
 | |
| 	sr = isl1208_i2c_read_regs(client, ISL1208_REG_SCA, regs,
 | |
| 				   ISL1208_ALARM_SECTION_LEN);
 | |
| 	if (sr < 0) {
 | |
| 		dev_err(&client->dev, "%s: reading alarm section failed\n",
 | |
| 			__func__);
 | |
| 		return sr;
 | |
| 	}
 | |
| 
 | |
| 	/* MSB of each alarm register is an enable bit */
 | |
| 	tm->tm_sec = bcd2bin(regs[ISL1208_REG_SCA - ISL1208_REG_SCA] & 0x7f);
 | |
| 	tm->tm_min = bcd2bin(regs[ISL1208_REG_MNA - ISL1208_REG_SCA] & 0x7f);
 | |
| 	tm->tm_hour = bcd2bin(regs[ISL1208_REG_HRA - ISL1208_REG_SCA] & 0x3f);
 | |
| 	tm->tm_mday = bcd2bin(regs[ISL1208_REG_DTA - ISL1208_REG_SCA] & 0x3f);
 | |
| 	tm->tm_mon =
 | |
| 		bcd2bin(regs[ISL1208_REG_MOA - ISL1208_REG_SCA] & 0x1f) - 1;
 | |
| 	tm->tm_wday = bcd2bin(regs[ISL1208_REG_DWA - ISL1208_REG_SCA] & 0x03);
 | |
| 
 | |
| 	/* The alarm doesn't store the year so get it from the rtc section */
 | |
| 	yr = i2c_smbus_read_byte_data(client, ISL1208_REG_YR);
 | |
| 	if (yr < 0) {
 | |
| 		dev_err(&client->dev, "%s: reading RTC YR failed\n", __func__);
 | |
| 		return yr;
 | |
| 	}
 | |
| 	tm->tm_year = bcd2bin(yr) + 100;
 | |
| 
 | |
| 	icr = i2c_smbus_read_byte_data(client, ISL1208_REG_INT);
 | |
| 	if (icr < 0) {
 | |
| 		dev_err(&client->dev, "%s: reading INT failed\n", __func__);
 | |
| 		return icr;
 | |
| 	}
 | |
| 	alarm->enabled = !!(icr & ISL1208_REG_INT_ALME);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int
 | |
| isl1208_i2c_set_alarm(struct i2c_client *client, struct rtc_wkalrm *alarm)
 | |
| {
 | |
| 	struct rtc_time *alarm_tm = &alarm->time;
 | |
| 	u8 regs[ISL1208_ALARM_SECTION_LEN] = { 0, };
 | |
| 	const int offs = ISL1208_REG_SCA;
 | |
| 	unsigned long rtc_secs, alarm_secs;
 | |
| 	struct rtc_time rtc_tm;
 | |
| 	int err, enable;
 | |
| 
 | |
| 	err = isl1208_i2c_read_time(client, &rtc_tm);
 | |
| 	if (err)
 | |
| 		return err;
 | |
| 	err = rtc_tm_to_time(&rtc_tm, &rtc_secs);
 | |
| 	if (err)
 | |
| 		return err;
 | |
| 	err = rtc_tm_to_time(alarm_tm, &alarm_secs);
 | |
| 	if (err)
 | |
| 		return err;
 | |
| 
 | |
| 	/* If the alarm time is before the current time disable the alarm */
 | |
| 	if (!alarm->enabled || alarm_secs <= rtc_secs)
 | |
| 		enable = 0x00;
 | |
| 	else
 | |
| 		enable = 0x80;
 | |
| 
 | |
| 	/* Program the alarm and enable it for each setting */
 | |
| 	regs[ISL1208_REG_SCA - offs] = bin2bcd(alarm_tm->tm_sec) | enable;
 | |
| 	regs[ISL1208_REG_MNA - offs] = bin2bcd(alarm_tm->tm_min) | enable;
 | |
| 	regs[ISL1208_REG_HRA - offs] = bin2bcd(alarm_tm->tm_hour) |
 | |
| 		ISL1208_REG_HR_MIL | enable;
 | |
| 
 | |
| 	regs[ISL1208_REG_DTA - offs] = bin2bcd(alarm_tm->tm_mday) | enable;
 | |
| 	regs[ISL1208_REG_MOA - offs] = bin2bcd(alarm_tm->tm_mon + 1) | enable;
 | |
| 	regs[ISL1208_REG_DWA - offs] = bin2bcd(alarm_tm->tm_wday & 7) | enable;
 | |
| 
 | |
| 	/* write ALARM registers */
 | |
| 	err = isl1208_i2c_set_regs(client, offs, regs,
 | |
| 				  ISL1208_ALARM_SECTION_LEN);
 | |
| 	if (err < 0) {
 | |
| 		dev_err(&client->dev, "%s: writing ALARM section failed\n",
 | |
| 			__func__);
 | |
| 		return err;
 | |
| 	}
 | |
| 
 | |
| 	err = isl1208_rtc_toggle_alarm(client, enable);
 | |
| 	if (err)
 | |
| 		return err;
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int
 | |
| isl1208_rtc_read_time(struct device *dev, struct rtc_time *tm)
 | |
| {
 | |
| 	return isl1208_i2c_read_time(to_i2c_client(dev), tm);
 | |
| }
 | |
| 
 | |
| static int
 | |
| isl1208_i2c_set_time(struct i2c_client *client, struct rtc_time const *tm)
 | |
| {
 | |
| 	int sr;
 | |
| 	u8 regs[ISL1208_RTC_SECTION_LEN] = { 0, };
 | |
| 
 | |
| 	/* The clock has an 8 bit wide bcd-coded register (they never learn)
 | |
| 	 * for the year. tm_year is an offset from 1900 and we are interested
 | |
| 	 * in the 2000-2099 range, so any value less than 100 is invalid.
 | |
| 	 */
 | |
| 	if (tm->tm_year < 100)
 | |
| 		return -EINVAL;
 | |
| 
 | |
| 	regs[ISL1208_REG_SC] = bin2bcd(tm->tm_sec);
 | |
| 	regs[ISL1208_REG_MN] = bin2bcd(tm->tm_min);
 | |
| 	regs[ISL1208_REG_HR] = bin2bcd(tm->tm_hour) | ISL1208_REG_HR_MIL;
 | |
| 
 | |
| 	regs[ISL1208_REG_DT] = bin2bcd(tm->tm_mday);
 | |
| 	regs[ISL1208_REG_MO] = bin2bcd(tm->tm_mon + 1);
 | |
| 	regs[ISL1208_REG_YR] = bin2bcd(tm->tm_year - 100);
 | |
| 
 | |
| 	regs[ISL1208_REG_DW] = bin2bcd(tm->tm_wday & 7);
 | |
| 
 | |
| 	sr = isl1208_i2c_get_sr(client);
 | |
| 	if (sr < 0) {
 | |
| 		dev_err(&client->dev, "%s: reading SR failed\n", __func__);
 | |
| 		return sr;
 | |
| 	}
 | |
| 
 | |
| 	/* set WRTC */
 | |
| 	sr = i2c_smbus_write_byte_data(client, ISL1208_REG_SR,
 | |
| 				       sr | ISL1208_REG_SR_WRTC);
 | |
| 	if (sr < 0) {
 | |
| 		dev_err(&client->dev, "%s: writing SR failed\n", __func__);
 | |
| 		return sr;
 | |
| 	}
 | |
| 
 | |
| 	/* write RTC registers */
 | |
| 	sr = isl1208_i2c_set_regs(client, 0, regs, ISL1208_RTC_SECTION_LEN);
 | |
| 	if (sr < 0) {
 | |
| 		dev_err(&client->dev, "%s: writing RTC section failed\n",
 | |
| 			__func__);
 | |
| 		return sr;
 | |
| 	}
 | |
| 
 | |
| 	/* clear WRTC again */
 | |
| 	sr = i2c_smbus_write_byte_data(client, ISL1208_REG_SR,
 | |
| 				       sr & ~ISL1208_REG_SR_WRTC);
 | |
| 	if (sr < 0) {
 | |
| 		dev_err(&client->dev, "%s: writing SR failed\n", __func__);
 | |
| 		return sr;
 | |
| 	}
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| 
 | |
| static int
 | |
| isl1208_rtc_set_time(struct device *dev, struct rtc_time *tm)
 | |
| {
 | |
| 	return isl1208_i2c_set_time(to_i2c_client(dev), tm);
 | |
| }
 | |
| 
 | |
| static int
 | |
| isl1208_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
 | |
| {
 | |
| 	return isl1208_i2c_read_alarm(to_i2c_client(dev), alarm);
 | |
| }
 | |
| 
 | |
| static int
 | |
| isl1208_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
 | |
| {
 | |
| 	return isl1208_i2c_set_alarm(to_i2c_client(dev), alarm);
 | |
| }
 | |
| 
 | |
| static irqreturn_t
 | |
| isl1208_rtc_interrupt(int irq, void *data)
 | |
| {
 | |
| 	unsigned long timeout = jiffies + msecs_to_jiffies(1000);
 | |
| 	struct i2c_client *client = data;
 | |
| 	struct rtc_device *rtc = i2c_get_clientdata(client);
 | |
| 	int handled = 0, sr, err;
 | |
| 
 | |
| 	/*
 | |
| 	 * I2C reads get NAK'ed if we read straight away after an interrupt?
 | |
| 	 * Using a mdelay/msleep didn't seem to help either, so we work around
 | |
| 	 * this by continually trying to read the register for a short time.
 | |
| 	 */
 | |
| 	while (1) {
 | |
| 		sr = isl1208_i2c_get_sr(client);
 | |
| 		if (sr >= 0)
 | |
| 			break;
 | |
| 
 | |
| 		if (time_after(jiffies, timeout)) {
 | |
| 			dev_err(&client->dev, "%s: reading SR failed\n",
 | |
| 				__func__);
 | |
| 			return sr;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	if (sr & ISL1208_REG_SR_ALM) {
 | |
| 		dev_dbg(&client->dev, "alarm!\n");
 | |
| 
 | |
| 		rtc_update_irq(rtc, 1, RTC_IRQF | RTC_AF);
 | |
| 
 | |
| 		/* Clear the alarm */
 | |
| 		sr &= ~ISL1208_REG_SR_ALM;
 | |
| 		sr = i2c_smbus_write_byte_data(client, ISL1208_REG_SR, sr);
 | |
| 		if (sr < 0)
 | |
| 			dev_err(&client->dev, "%s: writing SR failed\n",
 | |
| 				__func__);
 | |
| 		else
 | |
| 			handled = 1;
 | |
| 
 | |
| 		/* Disable the alarm */
 | |
| 		err = isl1208_rtc_toggle_alarm(client, 0);
 | |
| 		if (err)
 | |
| 			return err;
 | |
| 	}
 | |
| 
 | |
| 	return handled ? IRQ_HANDLED : IRQ_NONE;
 | |
| }
 | |
| 
 | |
| static const struct rtc_class_ops isl1208_rtc_ops = {
 | |
| 	.proc = isl1208_rtc_proc,
 | |
| 	.read_time = isl1208_rtc_read_time,
 | |
| 	.set_time = isl1208_rtc_set_time,
 | |
| 	.read_alarm = isl1208_rtc_read_alarm,
 | |
| 	.set_alarm = isl1208_rtc_set_alarm,
 | |
| };
 | |
| 
 | |
| /* sysfs interface */
 | |
| 
 | |
| static ssize_t
 | |
| isl1208_sysfs_show_atrim(struct device *dev,
 | |
| 			 struct device_attribute *attr, char *buf)
 | |
| {
 | |
| 	int atr = isl1208_i2c_get_atr(to_i2c_client(dev));
 | |
| 	if (atr < 0)
 | |
| 		return atr;
 | |
| 
 | |
| 	return sprintf(buf, "%d.%.2d pF\n", atr >> 2, (atr & 0x3) * 25);
 | |
| }
 | |
| 
 | |
| static DEVICE_ATTR(atrim, S_IRUGO, isl1208_sysfs_show_atrim, NULL);
 | |
| 
 | |
| static ssize_t
 | |
| isl1208_sysfs_show_dtrim(struct device *dev,
 | |
| 			 struct device_attribute *attr, char *buf)
 | |
| {
 | |
| 	int dtr = isl1208_i2c_get_dtr(to_i2c_client(dev));
 | |
| 	if (dtr < 0)
 | |
| 		return dtr;
 | |
| 
 | |
| 	return sprintf(buf, "%d ppm\n", dtr);
 | |
| }
 | |
| 
 | |
| static DEVICE_ATTR(dtrim, S_IRUGO, isl1208_sysfs_show_dtrim, NULL);
 | |
| 
 | |
| static ssize_t
 | |
| isl1208_sysfs_show_usr(struct device *dev,
 | |
| 		       struct device_attribute *attr, char *buf)
 | |
| {
 | |
| 	int usr = isl1208_i2c_get_usr(to_i2c_client(dev));
 | |
| 	if (usr < 0)
 | |
| 		return usr;
 | |
| 
 | |
| 	return sprintf(buf, "0x%.4x\n", usr);
 | |
| }
 | |
| 
 | |
| static ssize_t
 | |
| isl1208_sysfs_store_usr(struct device *dev,
 | |
| 			struct device_attribute *attr,
 | |
| 			const char *buf, size_t count)
 | |
| {
 | |
| 	int usr = -1;
 | |
| 
 | |
| 	if (buf[0] == '0' && (buf[1] == 'x' || buf[1] == 'X')) {
 | |
| 		if (sscanf(buf, "%x", &usr) != 1)
 | |
| 			return -EINVAL;
 | |
| 	} else {
 | |
| 		if (sscanf(buf, "%d", &usr) != 1)
 | |
| 			return -EINVAL;
 | |
| 	}
 | |
| 
 | |
| 	if (usr < 0 || usr > 0xffff)
 | |
| 		return -EINVAL;
 | |
| 
 | |
| 	return isl1208_i2c_set_usr(to_i2c_client(dev), usr) ? -EIO : count;
 | |
| }
 | |
| 
 | |
| static DEVICE_ATTR(usr, S_IRUGO | S_IWUSR, isl1208_sysfs_show_usr,
 | |
| 		   isl1208_sysfs_store_usr);
 | |
| 
 | |
| static struct attribute *isl1208_rtc_attrs[] = {
 | |
| 	&dev_attr_atrim.attr,
 | |
| 	&dev_attr_dtrim.attr,
 | |
| 	&dev_attr_usr.attr,
 | |
| 	NULL
 | |
| };
 | |
| 
 | |
| static const struct attribute_group isl1208_rtc_sysfs_files = {
 | |
| 	.attrs	= isl1208_rtc_attrs,
 | |
| };
 | |
| 
 | |
| static int
 | |
| isl1208_probe(struct i2c_client *client, const struct i2c_device_id *id)
 | |
| {
 | |
| 	int rc = 0;
 | |
| 	struct rtc_device *rtc;
 | |
| 
 | |
| 	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
 | |
| 		return -ENODEV;
 | |
| 
 | |
| 	if (isl1208_i2c_validate_client(client) < 0)
 | |
| 		return -ENODEV;
 | |
| 
 | |
| 	dev_info(&client->dev,
 | |
| 		 "chip found, driver version " DRV_VERSION "\n");
 | |
| 
 | |
| 	if (client->irq > 0) {
 | |
| 		rc = request_threaded_irq(client->irq, NULL,
 | |
| 					  isl1208_rtc_interrupt,
 | |
| 					  IRQF_SHARED,
 | |
| 					  isl1208_driver.driver.name, client);
 | |
| 		if (!rc) {
 | |
| 			device_init_wakeup(&client->dev, 1);
 | |
| 			enable_irq_wake(client->irq);
 | |
| 		} else {
 | |
| 			dev_err(&client->dev,
 | |
| 				"Unable to request irq %d, no alarm support\n",
 | |
| 				client->irq);
 | |
| 			client->irq = 0;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	rtc = rtc_device_register(isl1208_driver.driver.name,
 | |
| 				  &client->dev, &isl1208_rtc_ops,
 | |
| 				  THIS_MODULE);
 | |
| 	if (IS_ERR(rtc)) {
 | |
| 		rc = PTR_ERR(rtc);
 | |
| 		goto exit_free_irq;
 | |
| 	}
 | |
| 
 | |
| 	i2c_set_clientdata(client, rtc);
 | |
| 
 | |
| 	rc = isl1208_i2c_get_sr(client);
 | |
| 	if (rc < 0) {
 | |
| 		dev_err(&client->dev, "reading status failed\n");
 | |
| 		goto exit_unregister;
 | |
| 	}
 | |
| 
 | |
| 	if (rc & ISL1208_REG_SR_RTCF)
 | |
| 		dev_warn(&client->dev, "rtc power failure detected, "
 | |
| 			 "please set clock.\n");
 | |
| 
 | |
| 	rc = sysfs_create_group(&client->dev.kobj, &isl1208_rtc_sysfs_files);
 | |
| 	if (rc)
 | |
| 		goto exit_unregister;
 | |
| 
 | |
| 	return 0;
 | |
| 
 | |
| exit_unregister:
 | |
| 	rtc_device_unregister(rtc);
 | |
| exit_free_irq:
 | |
| 	if (client->irq)
 | |
| 		free_irq(client->irq, client);
 | |
| 
 | |
| 	return rc;
 | |
| }
 | |
| 
 | |
| static int
 | |
| isl1208_remove(struct i2c_client *client)
 | |
| {
 | |
| 	struct rtc_device *rtc = i2c_get_clientdata(client);
 | |
| 
 | |
| 	sysfs_remove_group(&client->dev.kobj, &isl1208_rtc_sysfs_files);
 | |
| 	rtc_device_unregister(rtc);
 | |
| 	if (client->irq)
 | |
| 		free_irq(client->irq, client);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static const struct i2c_device_id isl1208_id[] = {
 | |
| 	{ "isl1208", 0 },
 | |
| 	{ "isl1218", 0 },
 | |
| 	{ }
 | |
| };
 | |
| MODULE_DEVICE_TABLE(i2c, isl1208_id);
 | |
| 
 | |
| static struct i2c_driver isl1208_driver = {
 | |
| 	.driver = {
 | |
| 		   .name = "rtc-isl1208",
 | |
| 		   },
 | |
| 	.probe = isl1208_probe,
 | |
| 	.remove = isl1208_remove,
 | |
| 	.id_table = isl1208_id,
 | |
| };
 | |
| 
 | |
| module_i2c_driver(isl1208_driver);
 | |
| 
 | |
| MODULE_AUTHOR("Herbert Valerio Riedel <hvr@gnu.org>");
 | |
| MODULE_DESCRIPTION("Intersil ISL1208 RTC driver");
 | |
| MODULE_LICENSE("GPL");
 | |
| MODULE_VERSION(DRV_VERSION);
 |