 d1f3b65d2d
			
		
	
	
	d1f3b65d2d
	
	
	
		
			
			Loading cs553x_nand with Hynix H27U1G8F2BTR NAND flash causes this bug: kernel BUG at drivers/mtd/nand/nand_base.c:3345! invalid opcode: 0000 [#1] Modules linked in: cs553x_nand(+) vfat fat usb_storage ehci_hcd usbcore usb_comr Pid: 436, comm: modprobe Not tainted 3.6.7 #1 EIP: 0060:[<c118d205>] EFLAGS: 00010296 CPU: 0 EIP is at nand_scan_tail+0x64c/0x69c EAX: 00000034 EBX: cea6ed98 ECX: 00000000 EDX: 00000000 ESI: cea6ec00 EDI: cea6ec00 EBP: 20000000 ESP: cdd17e48 DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068 CR0: 8005003b CR2: 0804e119 CR3: 0d850000 CR4: 00000090 DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 DR6: ffff0ff0 DR7: 00000400 Process modprobe (pid: 436, ti=cdd16000 task=cdd1c320 task.ti=cdd16000) Stack: c12e962c c118f7ef 00000003 cea6ed98 d014b25c 20000000 fffff007 00000001 00000000 cdd53b00 d014b000 c1001021 cdd53b00 d01493c0 cdd53b00 cdd53b00 d01493c0 c1047f83 d014b4a0 00000000 cdd17f9c ce4be454 cdd17f48 cdd1c320 Call Trace: [<c118f7ef>] ? nand_scan+0x1b/0x4d [<d014b25c>] ? init_module+0x25c/0x2de [cs553x_nand] [<d014b000>] ? 0xd014afff [<c1001021>] ? do_one_initcall+0x21/0x111 [<c1047f83>] ? sys_init_module+0xe4/0x1261 [<c1031207>] ? task_work_run+0x36/0x43 [<c1265ced>] ? syscall_call+0x7/0xb Code: fa ff ff c7 86 d8 00 00 00 01 00 00 00 e9 5f fc ff ff 68 f8 26 2e c1 e8 a7 EIP: [<c118d205>] nand_scan_tail+0x64c/0x69c SS:ESP 0068:cdd17e48 Initialising ecc.strength before the call to nand_scan() fixes this. Signed-off-by: Nathan Williams <nathan@traverse.com.au> Cc: stable@vger.kernel.org [3.4+] Acked-by: Brian Norris <computersforpeace@gmail.com> Acked-by: Mike Dunn <mikedunn@newsguy.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
		
			
				
	
	
		
			359 lines
		
	
	
	
		
			9.6 KiB
			
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			359 lines
		
	
	
	
		
			9.6 KiB
			
		
	
	
	
		
			C
		
	
	
	
	
	
| /*
 | |
|  * drivers/mtd/nand/cs553x_nand.c
 | |
|  *
 | |
|  * (C) 2005, 2006 Red Hat Inc.
 | |
|  *
 | |
|  * Author: David Woodhouse <dwmw2@infradead.org>
 | |
|  *	   Tom Sylla <tom.sylla@amd.com>
 | |
|  *
 | |
|  * This program is free software; you can redistribute it and/or modify
 | |
|  * it under the terms of the GNU General Public License version 2 as
 | |
|  * published by the Free Software Foundation.
 | |
|  *
 | |
|  *  Overview:
 | |
|  *   This is a device driver for the NAND flash controller found on
 | |
|  *   the AMD CS5535/CS5536 companion chipsets for the Geode processor.
 | |
|  *   mtd-id for command line partitioning is cs553x_nand_cs[0-3]
 | |
|  *   where 0-3 reflects the chip select for NAND.
 | |
|  *
 | |
|  */
 | |
| 
 | |
| #include <linux/kernel.h>
 | |
| #include <linux/slab.h>
 | |
| #include <linux/init.h>
 | |
| #include <linux/module.h>
 | |
| #include <linux/delay.h>
 | |
| #include <linux/mtd/mtd.h>
 | |
| #include <linux/mtd/nand.h>
 | |
| #include <linux/mtd/nand_ecc.h>
 | |
| #include <linux/mtd/partitions.h>
 | |
| 
 | |
| #include <asm/msr.h>
 | |
| #include <asm/io.h>
 | |
| 
 | |
| #define NR_CS553X_CONTROLLERS	4
 | |
| 
 | |
| #define MSR_DIVIL_GLD_CAP	0x51400000	/* DIVIL capabilitiies */
 | |
| #define CAP_CS5535		0x2df000ULL
 | |
| #define CAP_CS5536		0x5df500ULL
 | |
| 
 | |
| /* NAND Timing MSRs */
 | |
| #define MSR_NANDF_DATA		0x5140001b	/* NAND Flash Data Timing MSR */
 | |
| #define MSR_NANDF_CTL		0x5140001c	/* NAND Flash Control Timing */
 | |
| #define MSR_NANDF_RSVD		0x5140001d	/* Reserved */
 | |
| 
 | |
| /* NAND BAR MSRs */
 | |
| #define MSR_DIVIL_LBAR_FLSH0	0x51400010	/* Flash Chip Select 0 */
 | |
| #define MSR_DIVIL_LBAR_FLSH1	0x51400011	/* Flash Chip Select 1 */
 | |
| #define MSR_DIVIL_LBAR_FLSH2	0x51400012	/* Flash Chip Select 2 */
 | |
| #define MSR_DIVIL_LBAR_FLSH3	0x51400013	/* Flash Chip Select 3 */
 | |
| 	/* Each made up of... */
 | |
| #define FLSH_LBAR_EN		(1ULL<<32)
 | |
| #define FLSH_NOR_NAND		(1ULL<<33)	/* 1 for NAND */
 | |
| #define FLSH_MEM_IO		(1ULL<<34)	/* 1 for MMIO */
 | |
| 	/* I/O BARs have BASE_ADDR in bits 15:4, IO_MASK in 47:36 */
 | |
| 	/* MMIO BARs have BASE_ADDR in bits 31:12, MEM_MASK in 63:44 */
 | |
| 
 | |
| /* Pin function selection MSR (IDE vs. flash on the IDE pins) */
 | |
| #define MSR_DIVIL_BALL_OPTS	0x51400015
 | |
| #define PIN_OPT_IDE		(1<<0)	/* 0 for flash, 1 for IDE */
 | |
| 
 | |
| /* Registers within the NAND flash controller BAR -- memory mapped */
 | |
| #define MM_NAND_DATA		0x00	/* 0 to 0x7ff, in fact */
 | |
| #define MM_NAND_CTL		0x800	/* Any even address 0x800-0x80e */
 | |
| #define MM_NAND_IO		0x801	/* Any odd address 0x801-0x80f */
 | |
| #define MM_NAND_STS		0x810
 | |
| #define MM_NAND_ECC_LSB		0x811
 | |
| #define MM_NAND_ECC_MSB		0x812
 | |
| #define MM_NAND_ECC_COL		0x813
 | |
| #define MM_NAND_LAC		0x814
 | |
| #define MM_NAND_ECC_CTL		0x815
 | |
| 
 | |
| /* Registers within the NAND flash controller BAR -- I/O mapped */
 | |
| #define IO_NAND_DATA		0x00	/* 0 to 3, in fact */
 | |
| #define IO_NAND_CTL		0x04
 | |
| #define IO_NAND_IO		0x05
 | |
| #define IO_NAND_STS		0x06
 | |
| #define IO_NAND_ECC_CTL		0x08
 | |
| #define IO_NAND_ECC_LSB		0x09
 | |
| #define IO_NAND_ECC_MSB		0x0a
 | |
| #define IO_NAND_ECC_COL		0x0b
 | |
| #define IO_NAND_LAC		0x0c
 | |
| 
 | |
| #define CS_NAND_CTL_DIST_EN	(1<<4)	/* Enable NAND Distract interrupt */
 | |
| #define CS_NAND_CTL_RDY_INT_MASK	(1<<3)	/* Enable RDY/BUSY# interrupt */
 | |
| #define CS_NAND_CTL_ALE		(1<<2)
 | |
| #define CS_NAND_CTL_CLE		(1<<1)
 | |
| #define CS_NAND_CTL_CE		(1<<0)	/* Keep low; 1 to reset */
 | |
| 
 | |
| #define CS_NAND_STS_FLASH_RDY	(1<<3)
 | |
| #define CS_NAND_CTLR_BUSY	(1<<2)
 | |
| #define CS_NAND_CMD_COMP	(1<<1)
 | |
| #define CS_NAND_DIST_ST		(1<<0)
 | |
| 
 | |
| #define CS_NAND_ECC_PARITY	(1<<2)
 | |
| #define CS_NAND_ECC_CLRECC	(1<<1)
 | |
| #define CS_NAND_ECC_ENECC	(1<<0)
 | |
| 
 | |
| static void cs553x_read_buf(struct mtd_info *mtd, u_char *buf, int len)
 | |
| {
 | |
| 	struct nand_chip *this = mtd->priv;
 | |
| 
 | |
| 	while (unlikely(len > 0x800)) {
 | |
| 		memcpy_fromio(buf, this->IO_ADDR_R, 0x800);
 | |
| 		buf += 0x800;
 | |
| 		len -= 0x800;
 | |
| 	}
 | |
| 	memcpy_fromio(buf, this->IO_ADDR_R, len);
 | |
| }
 | |
| 
 | |
| static void cs553x_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
 | |
| {
 | |
| 	struct nand_chip *this = mtd->priv;
 | |
| 
 | |
| 	while (unlikely(len > 0x800)) {
 | |
| 		memcpy_toio(this->IO_ADDR_R, buf, 0x800);
 | |
| 		buf += 0x800;
 | |
| 		len -= 0x800;
 | |
| 	}
 | |
| 	memcpy_toio(this->IO_ADDR_R, buf, len);
 | |
| }
 | |
| 
 | |
| static unsigned char cs553x_read_byte(struct mtd_info *mtd)
 | |
| {
 | |
| 	struct nand_chip *this = mtd->priv;
 | |
| 	return readb(this->IO_ADDR_R);
 | |
| }
 | |
| 
 | |
| static void cs553x_write_byte(struct mtd_info *mtd, u_char byte)
 | |
| {
 | |
| 	struct nand_chip *this = mtd->priv;
 | |
| 	int i = 100000;
 | |
| 
 | |
| 	while (i && readb(this->IO_ADDR_R + MM_NAND_STS) & CS_NAND_CTLR_BUSY) {
 | |
| 		udelay(1);
 | |
| 		i--;
 | |
| 	}
 | |
| 	writeb(byte, this->IO_ADDR_W + 0x801);
 | |
| }
 | |
| 
 | |
| static void cs553x_hwcontrol(struct mtd_info *mtd, int cmd,
 | |
| 			     unsigned int ctrl)
 | |
| {
 | |
| 	struct nand_chip *this = mtd->priv;
 | |
| 	void __iomem *mmio_base = this->IO_ADDR_R;
 | |
| 	if (ctrl & NAND_CTRL_CHANGE) {
 | |
| 		unsigned char ctl = (ctrl & ~NAND_CTRL_CHANGE ) ^ 0x01;
 | |
| 		writeb(ctl, mmio_base + MM_NAND_CTL);
 | |
| 	}
 | |
| 	if (cmd != NAND_CMD_NONE)
 | |
| 		cs553x_write_byte(mtd, cmd);
 | |
| }
 | |
| 
 | |
| static int cs553x_device_ready(struct mtd_info *mtd)
 | |
| {
 | |
| 	struct nand_chip *this = mtd->priv;
 | |
| 	void __iomem *mmio_base = this->IO_ADDR_R;
 | |
| 	unsigned char foo = readb(mmio_base + MM_NAND_STS);
 | |
| 
 | |
| 	return (foo & CS_NAND_STS_FLASH_RDY) && !(foo & CS_NAND_CTLR_BUSY);
 | |
| }
 | |
| 
 | |
| static void cs_enable_hwecc(struct mtd_info *mtd, int mode)
 | |
| {
 | |
| 	struct nand_chip *this = mtd->priv;
 | |
| 	void __iomem *mmio_base = this->IO_ADDR_R;
 | |
| 
 | |
| 	writeb(0x07, mmio_base + MM_NAND_ECC_CTL);
 | |
| }
 | |
| 
 | |
| static int cs_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u_char *ecc_code)
 | |
| {
 | |
| 	uint32_t ecc;
 | |
| 	struct nand_chip *this = mtd->priv;
 | |
| 	void __iomem *mmio_base = this->IO_ADDR_R;
 | |
| 
 | |
| 	ecc = readl(mmio_base + MM_NAND_STS);
 | |
| 
 | |
| 	ecc_code[1] = ecc >> 8;
 | |
| 	ecc_code[0] = ecc >> 16;
 | |
| 	ecc_code[2] = ecc >> 24;
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static struct mtd_info *cs553x_mtd[4];
 | |
| 
 | |
| static int __init cs553x_init_one(int cs, int mmio, unsigned long adr)
 | |
| {
 | |
| 	int err = 0;
 | |
| 	struct nand_chip *this;
 | |
| 	struct mtd_info *new_mtd;
 | |
| 
 | |
| 	printk(KERN_NOTICE "Probing CS553x NAND controller CS#%d at %sIO 0x%08lx\n", cs, mmio?"MM":"P", adr);
 | |
| 
 | |
| 	if (!mmio) {
 | |
| 		printk(KERN_NOTICE "PIO mode not yet implemented for CS553X NAND controller\n");
 | |
| 		return -ENXIO;
 | |
| 	}
 | |
| 
 | |
| 	/* Allocate memory for MTD device structure and private data */
 | |
| 	new_mtd = kmalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip), GFP_KERNEL);
 | |
| 	if (!new_mtd) {
 | |
| 		printk(KERN_WARNING "Unable to allocate CS553X NAND MTD device structure.\n");
 | |
| 		err = -ENOMEM;
 | |
| 		goto out;
 | |
| 	}
 | |
| 
 | |
| 	/* Get pointer to private data */
 | |
| 	this = (struct nand_chip *)(&new_mtd[1]);
 | |
| 
 | |
| 	/* Initialize structures */
 | |
| 	memset(new_mtd, 0, sizeof(struct mtd_info));
 | |
| 	memset(this, 0, sizeof(struct nand_chip));
 | |
| 
 | |
| 	/* Link the private data with the MTD structure */
 | |
| 	new_mtd->priv = this;
 | |
| 	new_mtd->owner = THIS_MODULE;
 | |
| 
 | |
| 	/* map physical address */
 | |
| 	this->IO_ADDR_R = this->IO_ADDR_W = ioremap(adr, 4096);
 | |
| 	if (!this->IO_ADDR_R) {
 | |
| 		printk(KERN_WARNING "ioremap cs553x NAND @0x%08lx failed\n", adr);
 | |
| 		err = -EIO;
 | |
| 		goto out_mtd;
 | |
| 	}
 | |
| 
 | |
| 	this->cmd_ctrl = cs553x_hwcontrol;
 | |
| 	this->dev_ready = cs553x_device_ready;
 | |
| 	this->read_byte = cs553x_read_byte;
 | |
| 	this->read_buf = cs553x_read_buf;
 | |
| 	this->write_buf = cs553x_write_buf;
 | |
| 
 | |
| 	this->chip_delay = 0;
 | |
| 
 | |
| 	this->ecc.mode = NAND_ECC_HW;
 | |
| 	this->ecc.size = 256;
 | |
| 	this->ecc.bytes = 3;
 | |
| 	this->ecc.hwctl  = cs_enable_hwecc;
 | |
| 	this->ecc.calculate = cs_calculate_ecc;
 | |
| 	this->ecc.correct  = nand_correct_data;
 | |
| 	this->ecc.strength = 1;
 | |
| 
 | |
| 	/* Enable the following for a flash based bad block table */
 | |
| 	this->bbt_options = NAND_BBT_USE_FLASH;
 | |
| 
 | |
| 	/* Scan to find existence of the device */
 | |
| 	if (nand_scan(new_mtd, 1)) {
 | |
| 		err = -ENXIO;
 | |
| 		goto out_ior;
 | |
| 	}
 | |
| 
 | |
| 	new_mtd->name = kasprintf(GFP_KERNEL, "cs553x_nand_cs%d", cs);
 | |
| 
 | |
| 	cs553x_mtd[cs] = new_mtd;
 | |
| 	goto out;
 | |
| 
 | |
| out_ior:
 | |
| 	iounmap(this->IO_ADDR_R);
 | |
| out_mtd:
 | |
| 	kfree(new_mtd);
 | |
| out:
 | |
| 	return err;
 | |
| }
 | |
| 
 | |
| static int is_geode(void)
 | |
| {
 | |
| 	/* These are the CPUs which will have a CS553[56] companion chip */
 | |
| 	if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD &&
 | |
| 	    boot_cpu_data.x86 == 5 &&
 | |
| 	    boot_cpu_data.x86_model == 10)
 | |
| 		return 1; /* Geode LX */
 | |
| 
 | |
| 	if ((boot_cpu_data.x86_vendor == X86_VENDOR_NSC ||
 | |
| 	     boot_cpu_data.x86_vendor == X86_VENDOR_CYRIX) &&
 | |
| 	    boot_cpu_data.x86 == 5 &&
 | |
| 	    boot_cpu_data.x86_model == 5)
 | |
| 		return 1; /* Geode GX (née GX2) */
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int __init cs553x_init(void)
 | |
| {
 | |
| 	int err = -ENXIO;
 | |
| 	int i;
 | |
| 	uint64_t val;
 | |
| 
 | |
| 	/* If the CPU isn't a Geode GX or LX, abort */
 | |
| 	if (!is_geode())
 | |
| 		return -ENXIO;
 | |
| 
 | |
| 	/* If it doesn't have the CS553[56], abort */
 | |
| 	rdmsrl(MSR_DIVIL_GLD_CAP, val);
 | |
| 	val &= ~0xFFULL;
 | |
| 	if (val != CAP_CS5535 && val != CAP_CS5536)
 | |
| 		return -ENXIO;
 | |
| 
 | |
| 	/* If it doesn't have the NAND controller enabled, abort */
 | |
| 	rdmsrl(MSR_DIVIL_BALL_OPTS, val);
 | |
| 	if (val & PIN_OPT_IDE) {
 | |
| 		printk(KERN_INFO "CS553x NAND controller: Flash I/O not enabled in MSR_DIVIL_BALL_OPTS.\n");
 | |
| 		return -ENXIO;
 | |
| 	}
 | |
| 
 | |
| 	for (i = 0; i < NR_CS553X_CONTROLLERS; i++) {
 | |
| 		rdmsrl(MSR_DIVIL_LBAR_FLSH0 + i, val);
 | |
| 
 | |
| 		if ((val & (FLSH_LBAR_EN|FLSH_NOR_NAND)) == (FLSH_LBAR_EN|FLSH_NOR_NAND))
 | |
| 			err = cs553x_init_one(i, !!(val & FLSH_MEM_IO), val & 0xFFFFFFFF);
 | |
| 	}
 | |
| 
 | |
| 	/* Register all devices together here. This means we can easily hack it to
 | |
| 	   do mtdconcat etc. if we want to. */
 | |
| 	for (i = 0; i < NR_CS553X_CONTROLLERS; i++) {
 | |
| 		if (cs553x_mtd[i]) {
 | |
| 			/* If any devices registered, return success. Else the last error. */
 | |
| 			mtd_device_parse_register(cs553x_mtd[i], NULL, NULL,
 | |
| 						  NULL, 0);
 | |
| 			err = 0;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	return err;
 | |
| }
 | |
| 
 | |
| module_init(cs553x_init);
 | |
| 
 | |
| static void __exit cs553x_cleanup(void)
 | |
| {
 | |
| 	int i;
 | |
| 
 | |
| 	for (i = 0; i < NR_CS553X_CONTROLLERS; i++) {
 | |
| 		struct mtd_info *mtd = cs553x_mtd[i];
 | |
| 		struct nand_chip *this;
 | |
| 		void __iomem *mmio_base;
 | |
| 
 | |
| 		if (!mtd)
 | |
| 			continue;
 | |
| 
 | |
| 		this = cs553x_mtd[i]->priv;
 | |
| 		mmio_base = this->IO_ADDR_R;
 | |
| 
 | |
| 		/* Release resources, unregister device */
 | |
| 		nand_release(cs553x_mtd[i]);
 | |
| 		kfree(cs553x_mtd[i]->name);
 | |
| 		cs553x_mtd[i] = NULL;
 | |
| 
 | |
| 		/* unmap physical address */
 | |
| 		iounmap(mmio_base);
 | |
| 
 | |
| 		/* Free the MTD device structure */
 | |
| 		kfree(mtd);
 | |
| 	}
 | |
| }
 | |
| 
 | |
| module_exit(cs553x_cleanup);
 | |
| 
 | |
| MODULE_LICENSE("GPL");
 | |
| MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org>");
 | |
| MODULE_DESCRIPTION("NAND controller driver for AMD CS5535/CS5536 companion chip");
 |