None of these files are actually using any __init type directives and hence don't need to include <linux/init.h>. Most are just a left over from __devinit and __cpuinit removal, or simply due to code getting copied from one driver to the next. This covers everything under drivers/net except for wireless, which has been submitted separately. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
		
			
				
	
	
		
			559 lines
		
	
	
	
		
			13 KiB
			
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			559 lines
		
	
	
	
		
			13 KiB
			
		
	
	
	
		
			C
		
	
	
	
	
	
/*
 | 
						|
 * CoreChip-sz SR9700 one chip USB 1.1 Ethernet Devices
 | 
						|
 *
 | 
						|
 * Author : Liu Junliang <liujunliang_ljl@163.com>
 | 
						|
 *
 | 
						|
 * Based on dm9601.c
 | 
						|
 *
 | 
						|
 * This file is licensed under the terms of the GNU General Public License
 | 
						|
 * version 2.  This program is licensed "as is" without any warranty of any
 | 
						|
 * kind, whether express or implied.
 | 
						|
 */
 | 
						|
 | 
						|
#include <linux/module.h>
 | 
						|
#include <linux/sched.h>
 | 
						|
#include <linux/stddef.h>
 | 
						|
#include <linux/netdevice.h>
 | 
						|
#include <linux/etherdevice.h>
 | 
						|
#include <linux/ethtool.h>
 | 
						|
#include <linux/mii.h>
 | 
						|
#include <linux/usb.h>
 | 
						|
#include <linux/crc32.h>
 | 
						|
#include <linux/usb/usbnet.h>
 | 
						|
 | 
						|
#include "sr9700.h"
 | 
						|
 | 
						|
static int sr_read(struct usbnet *dev, u8 reg, u16 length, void *data)
 | 
						|
{
 | 
						|
	int err;
 | 
						|
 | 
						|
	err = usbnet_read_cmd(dev, SR_RD_REGS, SR_REQ_RD_REG, 0, reg, data,
 | 
						|
			      length);
 | 
						|
	if ((err != length) && (err >= 0))
 | 
						|
		err = -EINVAL;
 | 
						|
	return err;
 | 
						|
}
 | 
						|
 | 
						|
static int sr_write(struct usbnet *dev, u8 reg, u16 length, void *data)
 | 
						|
{
 | 
						|
	int err;
 | 
						|
 | 
						|
	err = usbnet_write_cmd(dev, SR_WR_REGS, SR_REQ_WR_REG, 0, reg, data,
 | 
						|
			       length);
 | 
						|
	if ((err >= 0) && (err < length))
 | 
						|
		err = -EINVAL;
 | 
						|
	return err;
 | 
						|
}
 | 
						|
 | 
						|
static int sr_read_reg(struct usbnet *dev, u8 reg, u8 *value)
 | 
						|
{
 | 
						|
	return sr_read(dev, reg, 1, value);
 | 
						|
}
 | 
						|
 | 
						|
static int sr_write_reg(struct usbnet *dev, u8 reg, u8 value)
 | 
						|
{
 | 
						|
	return usbnet_write_cmd(dev, SR_WR_REGS, SR_REQ_WR_REG,
 | 
						|
				value, reg, NULL, 0);
 | 
						|
}
 | 
						|
 | 
						|
static void sr_write_async(struct usbnet *dev, u8 reg, u16 length, void *data)
 | 
						|
{
 | 
						|
	usbnet_write_cmd_async(dev, SR_WR_REGS, SR_REQ_WR_REG,
 | 
						|
			       0, reg, data, length);
 | 
						|
}
 | 
						|
 | 
						|
static void sr_write_reg_async(struct usbnet *dev, u8 reg, u8 value)
 | 
						|
{
 | 
						|
	usbnet_write_cmd_async(dev, SR_WR_REGS, SR_REQ_WR_REG,
 | 
						|
			       value, reg, NULL, 0);
 | 
						|
}
 | 
						|
 | 
						|
static int wait_phy_eeprom_ready(struct usbnet *dev, int phy)
 | 
						|
{
 | 
						|
	int i;
 | 
						|
 | 
						|
	for (i = 0; i < SR_SHARE_TIMEOUT; i++) {
 | 
						|
		u8 tmp = 0;
 | 
						|
		int ret;
 | 
						|
 | 
						|
		udelay(1);
 | 
						|
		ret = sr_read_reg(dev, EPCR, &tmp);
 | 
						|
		if (ret < 0)
 | 
						|
			return ret;
 | 
						|
 | 
						|
		/* ready */
 | 
						|
		if (!(tmp & EPCR_ERRE))
 | 
						|
			return 0;
 | 
						|
	}
 | 
						|
 | 
						|
	netdev_err(dev->net, "%s write timed out!\n", phy ? "phy" : "eeprom");
 | 
						|
 | 
						|
	return -EIO;
 | 
						|
}
 | 
						|
 | 
						|
static int sr_share_read_word(struct usbnet *dev, int phy, u8 reg,
 | 
						|
			      __le16 *value)
 | 
						|
{
 | 
						|
	int ret;
 | 
						|
 | 
						|
	mutex_lock(&dev->phy_mutex);
 | 
						|
 | 
						|
	sr_write_reg(dev, EPAR, phy ? (reg | EPAR_PHY_ADR) : reg);
 | 
						|
	sr_write_reg(dev, EPCR, phy ? (EPCR_EPOS | EPCR_ERPRR) : EPCR_ERPRR);
 | 
						|
 | 
						|
	ret = wait_phy_eeprom_ready(dev, phy);
 | 
						|
	if (ret < 0)
 | 
						|
		goto out_unlock;
 | 
						|
 | 
						|
	sr_write_reg(dev, EPCR, 0x0);
 | 
						|
	ret = sr_read(dev, EPDR, 2, value);
 | 
						|
 | 
						|
	netdev_dbg(dev->net, "read shared %d 0x%02x returned 0x%04x, %d\n",
 | 
						|
		   phy, reg, *value, ret);
 | 
						|
 | 
						|
out_unlock:
 | 
						|
	mutex_unlock(&dev->phy_mutex);
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
 | 
						|
static int sr_share_write_word(struct usbnet *dev, int phy, u8 reg,
 | 
						|
			       __le16 value)
 | 
						|
{
 | 
						|
	int ret;
 | 
						|
 | 
						|
	mutex_lock(&dev->phy_mutex);
 | 
						|
 | 
						|
	ret = sr_write(dev, EPDR, 2, &value);
 | 
						|
	if (ret < 0)
 | 
						|
		goto out_unlock;
 | 
						|
 | 
						|
	sr_write_reg(dev, EPAR, phy ? (reg | EPAR_PHY_ADR) : reg);
 | 
						|
	sr_write_reg(dev, EPCR, phy ? (EPCR_WEP | EPCR_EPOS | EPCR_ERPRW) :
 | 
						|
		    (EPCR_WEP | EPCR_ERPRW));
 | 
						|
 | 
						|
	ret = wait_phy_eeprom_ready(dev, phy);
 | 
						|
	if (ret < 0)
 | 
						|
		goto out_unlock;
 | 
						|
 | 
						|
	sr_write_reg(dev, EPCR, 0x0);
 | 
						|
 | 
						|
out_unlock:
 | 
						|
	mutex_unlock(&dev->phy_mutex);
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
 | 
						|
static int sr_read_eeprom_word(struct usbnet *dev, u8 offset, void *value)
 | 
						|
{
 | 
						|
	return sr_share_read_word(dev, 0, offset, value);
 | 
						|
}
 | 
						|
 | 
						|
static int sr9700_get_eeprom_len(struct net_device *netdev)
 | 
						|
{
 | 
						|
	return SR_EEPROM_LEN;
 | 
						|
}
 | 
						|
 | 
						|
static int sr9700_get_eeprom(struct net_device *netdev,
 | 
						|
			     struct ethtool_eeprom *eeprom, u8 *data)
 | 
						|
{
 | 
						|
	struct usbnet *dev = netdev_priv(netdev);
 | 
						|
	__le16 *buf = (__le16 *)data;
 | 
						|
	int ret = 0;
 | 
						|
	int i;
 | 
						|
 | 
						|
	/* access is 16bit */
 | 
						|
	if ((eeprom->offset & 0x01) || (eeprom->len & 0x01))
 | 
						|
		return -EINVAL;
 | 
						|
 | 
						|
	for (i = 0; i < eeprom->len / 2; i++) {
 | 
						|
		ret = sr_read_eeprom_word(dev, eeprom->offset / 2 + i, buf + i);
 | 
						|
		if (ret < 0)
 | 
						|
			break;
 | 
						|
	}
 | 
						|
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
 | 
						|
static int sr_mdio_read(struct net_device *netdev, int phy_id, int loc)
 | 
						|
{
 | 
						|
	struct usbnet *dev = netdev_priv(netdev);
 | 
						|
	__le16 res;
 | 
						|
	int rc = 0;
 | 
						|
 | 
						|
	if (phy_id) {
 | 
						|
		netdev_dbg(netdev, "Only internal phy supported\n");
 | 
						|
		return 0;
 | 
						|
	}
 | 
						|
 | 
						|
	/* Access NSR_LINKST bit for link status instead of MII_BMSR */
 | 
						|
	if (loc == MII_BMSR) {
 | 
						|
		u8 value;
 | 
						|
 | 
						|
		sr_read_reg(dev, NSR, &value);
 | 
						|
		if (value & NSR_LINKST)
 | 
						|
			rc = 1;
 | 
						|
	}
 | 
						|
	sr_share_read_word(dev, 1, loc, &res);
 | 
						|
	if (rc == 1)
 | 
						|
		res = le16_to_cpu(res) | BMSR_LSTATUS;
 | 
						|
	else
 | 
						|
		res = le16_to_cpu(res) & ~BMSR_LSTATUS;
 | 
						|
 | 
						|
	netdev_dbg(netdev, "sr_mdio_read() phy_id=0x%02x, loc=0x%02x, returns=0x%04x\n",
 | 
						|
		   phy_id, loc, res);
 | 
						|
 | 
						|
	return res;
 | 
						|
}
 | 
						|
 | 
						|
static void sr_mdio_write(struct net_device *netdev, int phy_id, int loc,
 | 
						|
			  int val)
 | 
						|
{
 | 
						|
	struct usbnet *dev = netdev_priv(netdev);
 | 
						|
	__le16 res = cpu_to_le16(val);
 | 
						|
 | 
						|
	if (phy_id) {
 | 
						|
		netdev_dbg(netdev, "Only internal phy supported\n");
 | 
						|
		return;
 | 
						|
	}
 | 
						|
 | 
						|
	netdev_dbg(netdev, "sr_mdio_write() phy_id=0x%02x, loc=0x%02x, val=0x%04x\n",
 | 
						|
		   phy_id, loc, val);
 | 
						|
 | 
						|
	sr_share_write_word(dev, 1, loc, res);
 | 
						|
}
 | 
						|
 | 
						|
static u32 sr9700_get_link(struct net_device *netdev)
 | 
						|
{
 | 
						|
	struct usbnet *dev = netdev_priv(netdev);
 | 
						|
	u8 value = 0;
 | 
						|
	int rc = 0;
 | 
						|
 | 
						|
	/* Get the Link Status directly */
 | 
						|
	sr_read_reg(dev, NSR, &value);
 | 
						|
	if (value & NSR_LINKST)
 | 
						|
		rc = 1;
 | 
						|
 | 
						|
	return rc;
 | 
						|
}
 | 
						|
 | 
						|
static int sr9700_ioctl(struct net_device *netdev, struct ifreq *rq, int cmd)
 | 
						|
{
 | 
						|
	struct usbnet *dev = netdev_priv(netdev);
 | 
						|
 | 
						|
	return generic_mii_ioctl(&dev->mii, if_mii(rq), cmd, NULL);
 | 
						|
}
 | 
						|
 | 
						|
static const struct ethtool_ops sr9700_ethtool_ops = {
 | 
						|
	.get_drvinfo	= usbnet_get_drvinfo,
 | 
						|
	.get_link	= sr9700_get_link,
 | 
						|
	.get_msglevel	= usbnet_get_msglevel,
 | 
						|
	.set_msglevel	= usbnet_set_msglevel,
 | 
						|
	.get_eeprom_len	= sr9700_get_eeprom_len,
 | 
						|
	.get_eeprom	= sr9700_get_eeprom,
 | 
						|
	.get_settings	= usbnet_get_settings,
 | 
						|
	.set_settings	= usbnet_set_settings,
 | 
						|
	.nway_reset	= usbnet_nway_reset,
 | 
						|
};
 | 
						|
 | 
						|
static void sr9700_set_multicast(struct net_device *netdev)
 | 
						|
{
 | 
						|
	struct usbnet *dev = netdev_priv(netdev);
 | 
						|
	/* We use the 20 byte dev->data for our 8 byte filter buffer
 | 
						|
	 * to avoid allocating memory that is tricky to free later
 | 
						|
	 */
 | 
						|
	u8 *hashes = (u8 *)&dev->data;
 | 
						|
	/* rx_ctl setting : enable, disable_long, disable_crc */
 | 
						|
	u8 rx_ctl = RCR_RXEN | RCR_DIS_CRC | RCR_DIS_LONG;
 | 
						|
 | 
						|
	memset(hashes, 0x00, SR_MCAST_SIZE);
 | 
						|
	/* broadcast address */
 | 
						|
	hashes[SR_MCAST_SIZE - 1] |= SR_MCAST_ADDR_FLAG;
 | 
						|
	if (netdev->flags & IFF_PROMISC) {
 | 
						|
		rx_ctl |= RCR_PRMSC;
 | 
						|
	} else if (netdev->flags & IFF_ALLMULTI ||
 | 
						|
		   netdev_mc_count(netdev) > SR_MCAST_MAX) {
 | 
						|
		rx_ctl |= RCR_RUNT;
 | 
						|
	} else if (!netdev_mc_empty(netdev)) {
 | 
						|
		struct netdev_hw_addr *ha;
 | 
						|
 | 
						|
		netdev_for_each_mc_addr(ha, netdev) {
 | 
						|
			u32 crc = ether_crc(ETH_ALEN, ha->addr) >> 26;
 | 
						|
			hashes[crc >> 3] |= 1 << (crc & 0x7);
 | 
						|
		}
 | 
						|
	}
 | 
						|
 | 
						|
	sr_write_async(dev, MAR, SR_MCAST_SIZE, hashes);
 | 
						|
	sr_write_reg_async(dev, RCR, rx_ctl);
 | 
						|
}
 | 
						|
 | 
						|
static int sr9700_set_mac_address(struct net_device *netdev, void *p)
 | 
						|
{
 | 
						|
	struct usbnet *dev = netdev_priv(netdev);
 | 
						|
	struct sockaddr *addr = p;
 | 
						|
 | 
						|
	if (!is_valid_ether_addr(addr->sa_data)) {
 | 
						|
		netdev_err(netdev, "not setting invalid mac address %pM\n",
 | 
						|
			   addr->sa_data);
 | 
						|
		return -EINVAL;
 | 
						|
	}
 | 
						|
 | 
						|
	memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
 | 
						|
	sr_write_async(dev, PAR, 6, netdev->dev_addr);
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static const struct net_device_ops sr9700_netdev_ops = {
 | 
						|
	.ndo_open		= usbnet_open,
 | 
						|
	.ndo_stop		= usbnet_stop,
 | 
						|
	.ndo_start_xmit		= usbnet_start_xmit,
 | 
						|
	.ndo_tx_timeout		= usbnet_tx_timeout,
 | 
						|
	.ndo_change_mtu		= usbnet_change_mtu,
 | 
						|
	.ndo_validate_addr	= eth_validate_addr,
 | 
						|
	.ndo_do_ioctl		= sr9700_ioctl,
 | 
						|
	.ndo_set_rx_mode	= sr9700_set_multicast,
 | 
						|
	.ndo_set_mac_address	= sr9700_set_mac_address,
 | 
						|
};
 | 
						|
 | 
						|
static int sr9700_bind(struct usbnet *dev, struct usb_interface *intf)
 | 
						|
{
 | 
						|
	struct net_device *netdev;
 | 
						|
	struct mii_if_info *mii;
 | 
						|
	int ret;
 | 
						|
 | 
						|
	ret = usbnet_get_endpoints(dev, intf);
 | 
						|
	if (ret)
 | 
						|
		goto out;
 | 
						|
 | 
						|
	netdev = dev->net;
 | 
						|
 | 
						|
	netdev->netdev_ops = &sr9700_netdev_ops;
 | 
						|
	netdev->ethtool_ops = &sr9700_ethtool_ops;
 | 
						|
	netdev->hard_header_len += SR_TX_OVERHEAD;
 | 
						|
	dev->hard_mtu = netdev->mtu + netdev->hard_header_len;
 | 
						|
	/* bulkin buffer is preferably not less than 3K */
 | 
						|
	dev->rx_urb_size = 3072;
 | 
						|
 | 
						|
	mii = &dev->mii;
 | 
						|
	mii->dev = netdev;
 | 
						|
	mii->mdio_read = sr_mdio_read;
 | 
						|
	mii->mdio_write = sr_mdio_write;
 | 
						|
	mii->phy_id_mask = 0x1f;
 | 
						|
	mii->reg_num_mask = 0x1f;
 | 
						|
 | 
						|
	sr_write_reg(dev, NCR, NCR_RST);
 | 
						|
	udelay(20);
 | 
						|
 | 
						|
	/* read MAC
 | 
						|
	 * After Chip Power on, the Chip will reload the MAC from
 | 
						|
	 * EEPROM automatically to PAR. In case there is no EEPROM externally,
 | 
						|
	 * a default MAC address is stored in PAR for making chip work properly.
 | 
						|
	 */
 | 
						|
	if (sr_read(dev, PAR, ETH_ALEN, netdev->dev_addr) < 0) {
 | 
						|
		netdev_err(netdev, "Error reading MAC address\n");
 | 
						|
		ret = -ENODEV;
 | 
						|
		goto out;
 | 
						|
	}
 | 
						|
 | 
						|
	/* power up and reset phy */
 | 
						|
	sr_write_reg(dev, PRR, PRR_PHY_RST);
 | 
						|
	/* at least 10ms, here 20ms for safe */
 | 
						|
	mdelay(20);
 | 
						|
	sr_write_reg(dev, PRR, 0);
 | 
						|
	/* at least 1ms, here 2ms for reading right register */
 | 
						|
	udelay(2 * 1000);
 | 
						|
 | 
						|
	/* receive broadcast packets */
 | 
						|
	sr9700_set_multicast(netdev);
 | 
						|
 | 
						|
	sr_mdio_write(netdev, mii->phy_id, MII_BMCR, BMCR_RESET);
 | 
						|
	sr_mdio_write(netdev, mii->phy_id, MII_ADVERTISE, ADVERTISE_ALL |
 | 
						|
		      ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP);
 | 
						|
	mii_nway_restart(mii);
 | 
						|
 | 
						|
out:
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
 | 
						|
static int sr9700_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
 | 
						|
{
 | 
						|
	struct sk_buff *sr_skb;
 | 
						|
	int len;
 | 
						|
 | 
						|
	/* skb content (packets) format :
 | 
						|
	 *                    p0            p1            p2    ......    pm
 | 
						|
	 *                 /      \
 | 
						|
	 *            /                \
 | 
						|
	 *        /                            \
 | 
						|
	 *  /                                        \
 | 
						|
	 * p0b0 p0b1 p0b2 p0b3 ...... p0b(n-4) p0b(n-3)...p0bn
 | 
						|
	 *
 | 
						|
	 * p0 : packet 0
 | 
						|
	 * p0b0 : packet 0 byte 0
 | 
						|
	 *
 | 
						|
	 * b0: rx status
 | 
						|
	 * b1: packet length (incl crc) low
 | 
						|
	 * b2: packet length (incl crc) high
 | 
						|
	 * b3..n-4: packet data
 | 
						|
	 * bn-3..bn: ethernet packet crc
 | 
						|
	 */
 | 
						|
	if (unlikely(skb->len < SR_RX_OVERHEAD)) {
 | 
						|
		netdev_err(dev->net, "unexpected tiny rx frame\n");
 | 
						|
		return 0;
 | 
						|
	}
 | 
						|
 | 
						|
	/* one skb may contains multiple packets */
 | 
						|
	while (skb->len > SR_RX_OVERHEAD) {
 | 
						|
		if (skb->data[0] != 0x40)
 | 
						|
			return 0;
 | 
						|
 | 
						|
		/* ignore the CRC length */
 | 
						|
		len = (skb->data[1] | (skb->data[2] << 8)) - 4;
 | 
						|
 | 
						|
		if (len > ETH_FRAME_LEN)
 | 
						|
			return 0;
 | 
						|
 | 
						|
		/* the last packet of current skb */
 | 
						|
		if (skb->len == (len + SR_RX_OVERHEAD))	{
 | 
						|
			skb_pull(skb, 3);
 | 
						|
			skb->len = len;
 | 
						|
			skb_set_tail_pointer(skb, len);
 | 
						|
			skb->truesize = len + sizeof(struct sk_buff);
 | 
						|
			return 2;
 | 
						|
		}
 | 
						|
 | 
						|
		/* skb_clone is used for address align */
 | 
						|
		sr_skb = skb_clone(skb, GFP_ATOMIC);
 | 
						|
		if (!sr_skb)
 | 
						|
			return 0;
 | 
						|
 | 
						|
		sr_skb->len = len;
 | 
						|
		sr_skb->data = skb->data + 3;
 | 
						|
		skb_set_tail_pointer(sr_skb, len);
 | 
						|
		sr_skb->truesize = len + sizeof(struct sk_buff);
 | 
						|
		usbnet_skb_return(dev, sr_skb);
 | 
						|
 | 
						|
		skb_pull(skb, len + SR_RX_OVERHEAD);
 | 
						|
	};
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static struct sk_buff *sr9700_tx_fixup(struct usbnet *dev, struct sk_buff *skb,
 | 
						|
				       gfp_t flags)
 | 
						|
{
 | 
						|
	int len;
 | 
						|
 | 
						|
	/* SR9700 can only send out one ethernet packet at once.
 | 
						|
	 *
 | 
						|
	 * b0 b1 b2 b3 ...... b(n-4) b(n-3)...bn
 | 
						|
	 *
 | 
						|
	 * b0: rx status
 | 
						|
	 * b1: packet length (incl crc) low
 | 
						|
	 * b2: packet length (incl crc) high
 | 
						|
	 * b3..n-4: packet data
 | 
						|
	 * bn-3..bn: ethernet packet crc
 | 
						|
	 */
 | 
						|
 | 
						|
	len = skb->len;
 | 
						|
 | 
						|
	if (skb_headroom(skb) < SR_TX_OVERHEAD) {
 | 
						|
		struct sk_buff *skb2;
 | 
						|
 | 
						|
		skb2 = skb_copy_expand(skb, SR_TX_OVERHEAD, 0, flags);
 | 
						|
		dev_kfree_skb_any(skb);
 | 
						|
		skb = skb2;
 | 
						|
		if (!skb)
 | 
						|
			return NULL;
 | 
						|
	}
 | 
						|
 | 
						|
	__skb_push(skb, SR_TX_OVERHEAD);
 | 
						|
 | 
						|
	/* usbnet adds padding if length is a multiple of packet size
 | 
						|
	 * if so, adjust length value in header
 | 
						|
	 */
 | 
						|
	if ((skb->len % dev->maxpacket) == 0)
 | 
						|
		len++;
 | 
						|
 | 
						|
	skb->data[0] = len;
 | 
						|
	skb->data[1] = len >> 8;
 | 
						|
 | 
						|
	return skb;
 | 
						|
}
 | 
						|
 | 
						|
static void sr9700_status(struct usbnet *dev, struct urb *urb)
 | 
						|
{
 | 
						|
	int link;
 | 
						|
	u8 *buf;
 | 
						|
 | 
						|
	/* format:
 | 
						|
	   b0: net status
 | 
						|
	   b1: tx status 1
 | 
						|
	   b2: tx status 2
 | 
						|
	   b3: rx status
 | 
						|
	   b4: rx overflow
 | 
						|
	   b5: rx count
 | 
						|
	   b6: tx count
 | 
						|
	   b7: gpr
 | 
						|
	*/
 | 
						|
 | 
						|
	if (urb->actual_length < 8)
 | 
						|
		return;
 | 
						|
 | 
						|
	buf = urb->transfer_buffer;
 | 
						|
 | 
						|
	link = !!(buf[0] & 0x40);
 | 
						|
	if (netif_carrier_ok(dev->net) != link) {
 | 
						|
		usbnet_link_change(dev, link, 1);
 | 
						|
		netdev_dbg(dev->net, "Link Status is: %d\n", link);
 | 
						|
	}
 | 
						|
}
 | 
						|
 | 
						|
static int sr9700_link_reset(struct usbnet *dev)
 | 
						|
{
 | 
						|
	struct ethtool_cmd ecmd;
 | 
						|
 | 
						|
	mii_check_media(&dev->mii, 1, 1);
 | 
						|
	mii_ethtool_gset(&dev->mii, &ecmd);
 | 
						|
 | 
						|
	netdev_dbg(dev->net, "link_reset() speed: %d duplex: %d\n",
 | 
						|
		   ecmd.speed, ecmd.duplex);
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static const struct driver_info sr9700_driver_info = {
 | 
						|
	.description	= "CoreChip SR9700 USB Ethernet",
 | 
						|
	.flags		= FLAG_ETHER,
 | 
						|
	.bind		= sr9700_bind,
 | 
						|
	.rx_fixup	= sr9700_rx_fixup,
 | 
						|
	.tx_fixup	= sr9700_tx_fixup,
 | 
						|
	.status		= sr9700_status,
 | 
						|
	.link_reset	= sr9700_link_reset,
 | 
						|
	.reset		= sr9700_link_reset,
 | 
						|
};
 | 
						|
 | 
						|
static const struct usb_device_id products[] = {
 | 
						|
	{
 | 
						|
		USB_DEVICE(0x0fe6, 0x9700),	/* SR9700 device */
 | 
						|
		.driver_info = (unsigned long)&sr9700_driver_info,
 | 
						|
	},
 | 
						|
	{},			/* END */
 | 
						|
};
 | 
						|
 | 
						|
MODULE_DEVICE_TABLE(usb, products);
 | 
						|
 | 
						|
static struct usb_driver sr9700_usb_driver = {
 | 
						|
	.name		= "sr9700",
 | 
						|
	.id_table	= products,
 | 
						|
	.probe		= usbnet_probe,
 | 
						|
	.disconnect	= usbnet_disconnect,
 | 
						|
	.suspend	= usbnet_suspend,
 | 
						|
	.resume		= usbnet_resume,
 | 
						|
	.disable_hub_initiated_lpm = 1,
 | 
						|
};
 | 
						|
 | 
						|
module_usb_driver(sr9700_usb_driver);
 | 
						|
 | 
						|
MODULE_AUTHOR("liujl <liujunliang_ljl@163.com>");
 | 
						|
MODULE_DESCRIPTION("SR9700 one chip USB 1.1 USB to Ethernet device from http://www.corechip-sz.com/");
 | 
						|
MODULE_LICENSE("GPL");
 |