This patch makes the ab8500 mixed signal chip expose the same interface for register access as the ab3100, ab3550 and ab5500 chip. The ab8500_read() and ab8500_write() is removed and replaced with abx500_get_register_interruptible() and abx500_set_register_interruptible(). Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
		
			
				
	
	
		
			366 lines
		
	
	
	
		
			9.2 KiB
			
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			366 lines
		
	
	
	
		
			9.2 KiB
			
		
	
	
	
		
			C
		
	
	
	
	
	
/*
 | 
						|
 * Copyright (C) ST-Ericsson SA 2010
 | 
						|
 *
 | 
						|
 * License terms: GNU General Public License (GPL) version 2
 | 
						|
 * Author: Virupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com>
 | 
						|
 *
 | 
						|
 * RTC clock driver for the RTC part of the AB8500 Power management chip.
 | 
						|
 * Based on RTC clock driver for the AB3100 Analog Baseband Chip by
 | 
						|
 * Linus Walleij <linus.walleij@stericsson.com>
 | 
						|
 */
 | 
						|
 | 
						|
#include <linux/module.h>
 | 
						|
#include <linux/kernel.h>
 | 
						|
#include <linux/init.h>
 | 
						|
#include <linux/platform_device.h>
 | 
						|
#include <linux/rtc.h>
 | 
						|
#include <linux/mfd/abx500.h>
 | 
						|
#include <linux/mfd/ab8500.h>
 | 
						|
#include <linux/delay.h>
 | 
						|
 | 
						|
#define AB8500_RTC_SOFF_STAT_REG	0x00
 | 
						|
#define AB8500_RTC_CC_CONF_REG		0x01
 | 
						|
#define AB8500_RTC_READ_REQ_REG		0x02
 | 
						|
#define AB8500_RTC_WATCH_TSECMID_REG	0x03
 | 
						|
#define AB8500_RTC_WATCH_TSECHI_REG	0x04
 | 
						|
#define AB8500_RTC_WATCH_TMIN_LOW_REG	0x05
 | 
						|
#define AB8500_RTC_WATCH_TMIN_MID_REG	0x06
 | 
						|
#define AB8500_RTC_WATCH_TMIN_HI_REG	0x07
 | 
						|
#define AB8500_RTC_ALRM_MIN_LOW_REG	0x08
 | 
						|
#define AB8500_RTC_ALRM_MIN_MID_REG	0x09
 | 
						|
#define AB8500_RTC_ALRM_MIN_HI_REG	0x0A
 | 
						|
#define AB8500_RTC_STAT_REG		0x0B
 | 
						|
#define AB8500_RTC_BKUP_CHG_REG		0x0C
 | 
						|
#define AB8500_RTC_FORCE_BKUP_REG	0x0D
 | 
						|
#define AB8500_RTC_CALIB_REG		0x0E
 | 
						|
#define AB8500_RTC_SWITCH_STAT_REG	0x0F
 | 
						|
 | 
						|
/* RtcReadRequest bits */
 | 
						|
#define RTC_READ_REQUEST		0x01
 | 
						|
#define RTC_WRITE_REQUEST		0x02
 | 
						|
 | 
						|
/* RtcCtrl bits */
 | 
						|
#define RTC_ALARM_ENA			0x04
 | 
						|
#define RTC_STATUS_DATA			0x01
 | 
						|
 | 
						|
#define COUNTS_PER_SEC			(0xF000 / 60)
 | 
						|
#define AB8500_RTC_EPOCH		2000
 | 
						|
 | 
						|
static const u8 ab8500_rtc_time_regs[] = {
 | 
						|
	AB8500_RTC_WATCH_TMIN_HI_REG, AB8500_RTC_WATCH_TMIN_MID_REG,
 | 
						|
	AB8500_RTC_WATCH_TMIN_LOW_REG, AB8500_RTC_WATCH_TSECHI_REG,
 | 
						|
	AB8500_RTC_WATCH_TSECMID_REG
 | 
						|
};
 | 
						|
 | 
						|
static const u8 ab8500_rtc_alarm_regs[] = {
 | 
						|
	AB8500_RTC_ALRM_MIN_HI_REG, AB8500_RTC_ALRM_MIN_MID_REG,
 | 
						|
	AB8500_RTC_ALRM_MIN_LOW_REG
 | 
						|
};
 | 
						|
 | 
						|
/* Calculate the seconds from 1970 to 01-01-2000 00:00:00 */
 | 
						|
static unsigned long get_elapsed_seconds(int year)
 | 
						|
{
 | 
						|
	unsigned long secs;
 | 
						|
	struct rtc_time tm = {
 | 
						|
		.tm_year = year - 1900,
 | 
						|
		.tm_mday = 1,
 | 
						|
	};
 | 
						|
 | 
						|
	/*
 | 
						|
	 * This function calculates secs from 1970 and not from
 | 
						|
	 * 1900, even if we supply the offset from year 1900.
 | 
						|
	 */
 | 
						|
	rtc_tm_to_time(&tm, &secs);
 | 
						|
	return secs;
 | 
						|
}
 | 
						|
 | 
						|
static int ab8500_rtc_read_time(struct device *dev, struct rtc_time *tm)
 | 
						|
{
 | 
						|
	unsigned long timeout = jiffies + HZ;
 | 
						|
	int retval, i;
 | 
						|
	unsigned long mins, secs;
 | 
						|
	unsigned char buf[ARRAY_SIZE(ab8500_rtc_time_regs)];
 | 
						|
	u8 value;
 | 
						|
 | 
						|
	/* Request a data read */
 | 
						|
	retval = abx500_set_register_interruptible(dev,
 | 
						|
		AB8500_RTC, AB8500_RTC_READ_REQ_REG, RTC_READ_REQUEST);
 | 
						|
	if (retval < 0)
 | 
						|
		return retval;
 | 
						|
 | 
						|
	/* Early AB8500 chips will not clear the rtc read request bit */
 | 
						|
	if (abx500_get_chip_id(dev) == 0) {
 | 
						|
		msleep(1);
 | 
						|
	} else {
 | 
						|
		/* Wait for some cycles after enabling the rtc read in ab8500 */
 | 
						|
		while (time_before(jiffies, timeout)) {
 | 
						|
			retval = abx500_get_register_interruptible(dev,
 | 
						|
				AB8500_RTC, AB8500_RTC_READ_REQ_REG, &value);
 | 
						|
			if (retval < 0)
 | 
						|
				return retval;
 | 
						|
 | 
						|
			if (!(value & RTC_READ_REQUEST))
 | 
						|
				break;
 | 
						|
 | 
						|
			msleep(1);
 | 
						|
		}
 | 
						|
	}
 | 
						|
 | 
						|
	/* Read the Watchtime registers */
 | 
						|
	for (i = 0; i < ARRAY_SIZE(ab8500_rtc_time_regs); i++) {
 | 
						|
		retval = abx500_get_register_interruptible(dev,
 | 
						|
			AB8500_RTC, ab8500_rtc_time_regs[i], &value);
 | 
						|
		if (retval < 0)
 | 
						|
			return retval;
 | 
						|
		buf[i] = value;
 | 
						|
	}
 | 
						|
 | 
						|
	mins = (buf[0] << 16) | (buf[1] << 8) | buf[2];
 | 
						|
 | 
						|
	secs =	(buf[3] << 8) | buf[4];
 | 
						|
	secs =	secs / COUNTS_PER_SEC;
 | 
						|
	secs =	secs + (mins * 60);
 | 
						|
 | 
						|
	/* Add back the initially subtracted number of seconds */
 | 
						|
	secs += get_elapsed_seconds(AB8500_RTC_EPOCH);
 | 
						|
 | 
						|
	rtc_time_to_tm(secs, tm);
 | 
						|
	return rtc_valid_tm(tm);
 | 
						|
}
 | 
						|
 | 
						|
static int ab8500_rtc_set_time(struct device *dev, struct rtc_time *tm)
 | 
						|
{
 | 
						|
	int retval, i;
 | 
						|
	unsigned char buf[ARRAY_SIZE(ab8500_rtc_time_regs)];
 | 
						|
	unsigned long no_secs, no_mins, secs = 0;
 | 
						|
 | 
						|
	if (tm->tm_year < (AB8500_RTC_EPOCH - 1900)) {
 | 
						|
		dev_dbg(dev, "year should be equal to or greater than %d\n",
 | 
						|
				AB8500_RTC_EPOCH);
 | 
						|
		return -EINVAL;
 | 
						|
	}
 | 
						|
 | 
						|
	/* Get the number of seconds since 1970 */
 | 
						|
	rtc_tm_to_time(tm, &secs);
 | 
						|
 | 
						|
	/*
 | 
						|
	 * Convert it to the number of seconds since 01-01-2000 00:00:00, since
 | 
						|
	 * we only have a small counter in the RTC.
 | 
						|
	 */
 | 
						|
	secs -= get_elapsed_seconds(AB8500_RTC_EPOCH);
 | 
						|
 | 
						|
	no_mins = secs / 60;
 | 
						|
 | 
						|
	no_secs = secs % 60;
 | 
						|
	/* Make the seconds count as per the RTC resolution */
 | 
						|
	no_secs = no_secs * COUNTS_PER_SEC;
 | 
						|
 | 
						|
	buf[4] = no_secs & 0xFF;
 | 
						|
	buf[3] = (no_secs >> 8) & 0xFF;
 | 
						|
 | 
						|
	buf[2] = no_mins & 0xFF;
 | 
						|
	buf[1] = (no_mins >> 8) & 0xFF;
 | 
						|
	buf[0] = (no_mins >> 16) & 0xFF;
 | 
						|
 | 
						|
	for (i = 0; i < ARRAY_SIZE(ab8500_rtc_time_regs); i++) {
 | 
						|
		retval = abx500_set_register_interruptible(dev, AB8500_RTC,
 | 
						|
			ab8500_rtc_time_regs[i], buf[i]);
 | 
						|
		if (retval < 0)
 | 
						|
			return retval;
 | 
						|
	}
 | 
						|
 | 
						|
	/* Request a data write */
 | 
						|
	return abx500_set_register_interruptible(dev, AB8500_RTC,
 | 
						|
		AB8500_RTC_READ_REQ_REG, RTC_WRITE_REQUEST);
 | 
						|
}
 | 
						|
 | 
						|
static int ab8500_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
 | 
						|
{
 | 
						|
	int retval, i;
 | 
						|
	u8 rtc_ctrl, value;
 | 
						|
	unsigned char buf[ARRAY_SIZE(ab8500_rtc_alarm_regs)];
 | 
						|
	unsigned long secs, mins;
 | 
						|
 | 
						|
	/* Check if the alarm is enabled or not */
 | 
						|
	retval = abx500_get_register_interruptible(dev, AB8500_RTC,
 | 
						|
		AB8500_RTC_STAT_REG, &rtc_ctrl);
 | 
						|
	if (retval < 0)
 | 
						|
		return retval;
 | 
						|
 | 
						|
	if (rtc_ctrl & RTC_ALARM_ENA)
 | 
						|
		alarm->enabled = 1;
 | 
						|
	else
 | 
						|
		alarm->enabled = 0;
 | 
						|
 | 
						|
	alarm->pending = 0;
 | 
						|
 | 
						|
	for (i = 0; i < ARRAY_SIZE(ab8500_rtc_alarm_regs); i++) {
 | 
						|
		retval = abx500_get_register_interruptible(dev, AB8500_RTC,
 | 
						|
			ab8500_rtc_alarm_regs[i], &value);
 | 
						|
		if (retval < 0)
 | 
						|
			return retval;
 | 
						|
		buf[i] = value;
 | 
						|
	}
 | 
						|
 | 
						|
	mins = (buf[0] << 16) | (buf[1] << 8) | (buf[2]);
 | 
						|
	secs = mins * 60;
 | 
						|
 | 
						|
	/* Add back the initially subtracted number of seconds */
 | 
						|
	secs += get_elapsed_seconds(AB8500_RTC_EPOCH);
 | 
						|
 | 
						|
	rtc_time_to_tm(secs, &alarm->time);
 | 
						|
 | 
						|
	return rtc_valid_tm(&alarm->time);
 | 
						|
}
 | 
						|
 | 
						|
static int ab8500_rtc_irq_enable(struct device *dev, unsigned int enabled)
 | 
						|
{
 | 
						|
	return abx500_mask_and_set_register_interruptible(dev, AB8500_RTC,
 | 
						|
		AB8500_RTC_STAT_REG, RTC_ALARM_ENA,
 | 
						|
		enabled ? RTC_ALARM_ENA : 0);
 | 
						|
}
 | 
						|
 | 
						|
static int ab8500_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
 | 
						|
{
 | 
						|
	int retval, i;
 | 
						|
	unsigned char buf[ARRAY_SIZE(ab8500_rtc_alarm_regs)];
 | 
						|
	unsigned long mins, secs = 0;
 | 
						|
 | 
						|
	if (alarm->time.tm_year < (AB8500_RTC_EPOCH - 1900)) {
 | 
						|
		dev_dbg(dev, "year should be equal to or greater than %d\n",
 | 
						|
				AB8500_RTC_EPOCH);
 | 
						|
		return -EINVAL;
 | 
						|
	}
 | 
						|
 | 
						|
	/* Get the number of seconds since 1970 */
 | 
						|
	rtc_tm_to_time(&alarm->time, &secs);
 | 
						|
 | 
						|
	/*
 | 
						|
	 * Convert it to the number of seconds since 01-01-2000 00:00:00, since
 | 
						|
	 * we only have a small counter in the RTC.
 | 
						|
	 */
 | 
						|
	secs -= get_elapsed_seconds(AB8500_RTC_EPOCH);
 | 
						|
 | 
						|
	mins = secs / 60;
 | 
						|
 | 
						|
	buf[2] = mins & 0xFF;
 | 
						|
	buf[1] = (mins >> 8) & 0xFF;
 | 
						|
	buf[0] = (mins >> 16) & 0xFF;
 | 
						|
 | 
						|
	/* Set the alarm time */
 | 
						|
	for (i = 0; i < ARRAY_SIZE(ab8500_rtc_alarm_regs); i++) {
 | 
						|
		retval = abx500_set_register_interruptible(dev, AB8500_RTC,
 | 
						|
			ab8500_rtc_alarm_regs[i], buf[i]);
 | 
						|
		if (retval < 0)
 | 
						|
			return retval;
 | 
						|
	}
 | 
						|
 | 
						|
	return ab8500_rtc_irq_enable(dev, alarm->enabled);
 | 
						|
}
 | 
						|
 | 
						|
static irqreturn_t rtc_alarm_handler(int irq, void *data)
 | 
						|
{
 | 
						|
	struct rtc_device *rtc = data;
 | 
						|
	unsigned long events = RTC_IRQF | RTC_AF;
 | 
						|
 | 
						|
	dev_dbg(&rtc->dev, "%s\n", __func__);
 | 
						|
	rtc_update_irq(rtc, 1, events);
 | 
						|
 | 
						|
	return IRQ_HANDLED;
 | 
						|
}
 | 
						|
 | 
						|
static const struct rtc_class_ops ab8500_rtc_ops = {
 | 
						|
	.read_time		= ab8500_rtc_read_time,
 | 
						|
	.set_time		= ab8500_rtc_set_time,
 | 
						|
	.read_alarm		= ab8500_rtc_read_alarm,
 | 
						|
	.set_alarm		= ab8500_rtc_set_alarm,
 | 
						|
	.alarm_irq_enable	= ab8500_rtc_irq_enable,
 | 
						|
};
 | 
						|
 | 
						|
static int __devinit ab8500_rtc_probe(struct platform_device *pdev)
 | 
						|
{
 | 
						|
	int err;
 | 
						|
	struct rtc_device *rtc;
 | 
						|
	u8 rtc_ctrl;
 | 
						|
	int irq;
 | 
						|
 | 
						|
	irq = platform_get_irq_byname(pdev, "ALARM");
 | 
						|
	if (irq < 0)
 | 
						|
		return irq;
 | 
						|
 | 
						|
	/* For RTC supply test */
 | 
						|
	err = abx500_mask_and_set_register_interruptible(&pdev->dev, AB8500_RTC,
 | 
						|
		AB8500_RTC_STAT_REG, RTC_STATUS_DATA, RTC_STATUS_DATA);
 | 
						|
	if (err < 0)
 | 
						|
		return err;
 | 
						|
 | 
						|
	/* Wait for reset by the PorRtc */
 | 
						|
	msleep(1);
 | 
						|
 | 
						|
	err = abx500_get_register_interruptible(&pdev->dev, AB8500_RTC,
 | 
						|
		AB8500_RTC_STAT_REG, &rtc_ctrl);
 | 
						|
	if (err < 0)
 | 
						|
		return err;
 | 
						|
 | 
						|
	/* Check if the RTC Supply fails */
 | 
						|
	if (!(rtc_ctrl & RTC_STATUS_DATA)) {
 | 
						|
		dev_err(&pdev->dev, "RTC supply failure\n");
 | 
						|
		return -ENODEV;
 | 
						|
	}
 | 
						|
 | 
						|
	rtc = rtc_device_register("ab8500-rtc", &pdev->dev, &ab8500_rtc_ops,
 | 
						|
			THIS_MODULE);
 | 
						|
	if (IS_ERR(rtc)) {
 | 
						|
		dev_err(&pdev->dev, "Registration failed\n");
 | 
						|
		err = PTR_ERR(rtc);
 | 
						|
		return err;
 | 
						|
	}
 | 
						|
 | 
						|
	err = request_threaded_irq(irq, NULL, rtc_alarm_handler, 0,
 | 
						|
				   "ab8500-rtc", rtc);
 | 
						|
	if (err < 0) {
 | 
						|
		rtc_device_unregister(rtc);
 | 
						|
		return err;
 | 
						|
	}
 | 
						|
 | 
						|
	platform_set_drvdata(pdev, rtc);
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int __devexit ab8500_rtc_remove(struct platform_device *pdev)
 | 
						|
{
 | 
						|
	struct rtc_device *rtc = platform_get_drvdata(pdev);
 | 
						|
	int irq = platform_get_irq_byname(pdev, "ALARM");
 | 
						|
 | 
						|
	free_irq(irq, rtc);
 | 
						|
	rtc_device_unregister(rtc);
 | 
						|
	platform_set_drvdata(pdev, NULL);
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static struct platform_driver ab8500_rtc_driver = {
 | 
						|
	.driver = {
 | 
						|
		.name = "ab8500-rtc",
 | 
						|
		.owner = THIS_MODULE,
 | 
						|
	},
 | 
						|
	.probe	= ab8500_rtc_probe,
 | 
						|
	.remove = __devexit_p(ab8500_rtc_remove),
 | 
						|
};
 | 
						|
 | 
						|
static int __init ab8500_rtc_init(void)
 | 
						|
{
 | 
						|
	return platform_driver_register(&ab8500_rtc_driver);
 | 
						|
}
 | 
						|
 | 
						|
static void __exit ab8500_rtc_exit(void)
 | 
						|
{
 | 
						|
	platform_driver_unregister(&ab8500_rtc_driver);
 | 
						|
}
 | 
						|
 | 
						|
module_init(ab8500_rtc_init);
 | 
						|
module_exit(ab8500_rtc_exit);
 | 
						|
MODULE_AUTHOR("Virupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com>");
 | 
						|
MODULE_DESCRIPTION("AB8500 RTC Driver");
 | 
						|
MODULE_LICENSE("GPL v2");
 |