- final bits (again) for the rotation support (Sonika Jindal) - support bl_power in the intel backlight (Jani) - vdd handling improvements from Ville - i830M fixes from Ville - piles of prep work all over to make skl enabling just plug in (Damien, Sonika) - rename DP training defines to reflect latest edp standards, this touches all drm drivers supporting DP (Sonika Jindal) - cache edids during single detect cycle to avoid re-reading it for e.g. audio, from Chris - move w/a for registers which are stored in the hw context to the context init code (Arun&Damien) - edp panel power sequencer fixes, helps chv a lot (Ville) - piles of other chv fixes all over - much more paranoid pageflip handling with stall detection and better recovery from Chris - small things all over, as usual * tag 'drm-intel-next-2014-09-05' of git://anongit.freedesktop.org/drm-intel: (114 commits) drm/i915: Update DRIVER_DATE to 20140905 drm/i915: Decouple the stuck pageflip on modeset drm/i915: Check for a stalled page flip after each vblank drm/i915: Introduce a for_each_plane() macro drm/i915: Rewrite ABS_DIFF() in a safer manner drm/i915: Add comments explaining the vdd on/off functions drm/i915: Move DP port disable to post_disable for pch platforms drm/i915: Enable DP port earlier drm/i915: Turn on panel power before doing aux transfers drm/i915: Be more careful when picking the initial power sequencer pipe drm/i915: Reset power sequencer pipe tracking when disp2d is off drm/i915: Track which port is using which pipe's power sequencer drm/i915: Fix edp vdd locking drm/i915: Reset the HEAD pointer for the ring after writing START drm/i915: Fix unsafe vma iteration in i915_drop_caches drm/i915: init sprites with univeral plane init function drm/i915: Check of !HAS_PCH_SPLIT() in PCH transcoder funcs drm/i915: Use HAS_GMCH_DISPLAY un underrun reporting code drm/i915: Use IS_BROADWELL() instead of IS_GEN8() in forcewake code drm/i915: Don't call gen8_fbc_sw_flush() on chv ...
		
			
				
	
	
		
			1374 lines
		
	
	
	
		
			41 KiB
			
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			1374 lines
		
	
	
	
		
			41 KiB
			
		
	
	
	
		
			C
		
	
	
	
	
	
/*
 | 
						|
 * Copyright © 2006-2010 Intel Corporation
 | 
						|
 * Copyright (c) 2006 Dave Airlie <airlied@linux.ie>
 | 
						|
 *
 | 
						|
 * Permission is hereby granted, free of charge, to any person obtaining a
 | 
						|
 * copy of this software and associated documentation files (the "Software"),
 | 
						|
 * to deal in the Software without restriction, including without limitation
 | 
						|
 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
 | 
						|
 * and/or sell copies of the Software, and to permit persons to whom the
 | 
						|
 * Software is furnished to do so, subject to the following conditions:
 | 
						|
 *
 | 
						|
 * The above copyright notice and this permission notice (including the next
 | 
						|
 * paragraph) shall be included in all copies or substantial portions of the
 | 
						|
 * Software.
 | 
						|
 *
 | 
						|
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 | 
						|
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 | 
						|
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
 | 
						|
 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 | 
						|
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
 | 
						|
 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
 | 
						|
 * DEALINGS IN THE SOFTWARE.
 | 
						|
 *
 | 
						|
 * Authors:
 | 
						|
 *	Eric Anholt <eric@anholt.net>
 | 
						|
 *      Dave Airlie <airlied@linux.ie>
 | 
						|
 *      Jesse Barnes <jesse.barnes@intel.com>
 | 
						|
 *      Chris Wilson <chris@chris-wilson.co.uk>
 | 
						|
 */
 | 
						|
 | 
						|
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 | 
						|
 | 
						|
#include <linux/moduleparam.h>
 | 
						|
#include "intel_drv.h"
 | 
						|
 | 
						|
void
 | 
						|
intel_fixed_panel_mode(const struct drm_display_mode *fixed_mode,
 | 
						|
		       struct drm_display_mode *adjusted_mode)
 | 
						|
{
 | 
						|
	drm_mode_copy(adjusted_mode, fixed_mode);
 | 
						|
 | 
						|
	drm_mode_set_crtcinfo(adjusted_mode, 0);
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 * intel_find_panel_downclock - find the reduced downclock for LVDS in EDID
 | 
						|
 * @dev: drm device
 | 
						|
 * @fixed_mode : panel native mode
 | 
						|
 * @connector: LVDS/eDP connector
 | 
						|
 *
 | 
						|
 * Return downclock_avail
 | 
						|
 * Find the reduced downclock for LVDS/eDP in EDID.
 | 
						|
 */
 | 
						|
struct drm_display_mode *
 | 
						|
intel_find_panel_downclock(struct drm_device *dev,
 | 
						|
			struct drm_display_mode *fixed_mode,
 | 
						|
			struct drm_connector *connector)
 | 
						|
{
 | 
						|
	struct drm_display_mode *scan, *tmp_mode;
 | 
						|
	int temp_downclock;
 | 
						|
 | 
						|
	temp_downclock = fixed_mode->clock;
 | 
						|
	tmp_mode = NULL;
 | 
						|
 | 
						|
	list_for_each_entry(scan, &connector->probed_modes, head) {
 | 
						|
		/*
 | 
						|
		 * If one mode has the same resolution with the fixed_panel
 | 
						|
		 * mode while they have the different refresh rate, it means
 | 
						|
		 * that the reduced downclock is found. In such
 | 
						|
		 * case we can set the different FPx0/1 to dynamically select
 | 
						|
		 * between low and high frequency.
 | 
						|
		 */
 | 
						|
		if (scan->hdisplay == fixed_mode->hdisplay &&
 | 
						|
		    scan->hsync_start == fixed_mode->hsync_start &&
 | 
						|
		    scan->hsync_end == fixed_mode->hsync_end &&
 | 
						|
		    scan->htotal == fixed_mode->htotal &&
 | 
						|
		    scan->vdisplay == fixed_mode->vdisplay &&
 | 
						|
		    scan->vsync_start == fixed_mode->vsync_start &&
 | 
						|
		    scan->vsync_end == fixed_mode->vsync_end &&
 | 
						|
		    scan->vtotal == fixed_mode->vtotal) {
 | 
						|
			if (scan->clock < temp_downclock) {
 | 
						|
				/*
 | 
						|
				 * The downclock is already found. But we
 | 
						|
				 * expect to find the lower downclock.
 | 
						|
				 */
 | 
						|
				temp_downclock = scan->clock;
 | 
						|
				tmp_mode = scan;
 | 
						|
			}
 | 
						|
		}
 | 
						|
	}
 | 
						|
 | 
						|
	if (temp_downclock < fixed_mode->clock)
 | 
						|
		return drm_mode_duplicate(dev, tmp_mode);
 | 
						|
	else
 | 
						|
		return NULL;
 | 
						|
}
 | 
						|
 | 
						|
/* adjusted_mode has been preset to be the panel's fixed mode */
 | 
						|
void
 | 
						|
intel_pch_panel_fitting(struct intel_crtc *intel_crtc,
 | 
						|
			struct intel_crtc_config *pipe_config,
 | 
						|
			int fitting_mode)
 | 
						|
{
 | 
						|
	struct drm_display_mode *adjusted_mode;
 | 
						|
	int x, y, width, height;
 | 
						|
 | 
						|
	adjusted_mode = &pipe_config->adjusted_mode;
 | 
						|
 | 
						|
	x = y = width = height = 0;
 | 
						|
 | 
						|
	/* Native modes don't need fitting */
 | 
						|
	if (adjusted_mode->hdisplay == pipe_config->pipe_src_w &&
 | 
						|
	    adjusted_mode->vdisplay == pipe_config->pipe_src_h)
 | 
						|
		goto done;
 | 
						|
 | 
						|
	switch (fitting_mode) {
 | 
						|
	case DRM_MODE_SCALE_CENTER:
 | 
						|
		width = pipe_config->pipe_src_w;
 | 
						|
		height = pipe_config->pipe_src_h;
 | 
						|
		x = (adjusted_mode->hdisplay - width + 1)/2;
 | 
						|
		y = (adjusted_mode->vdisplay - height + 1)/2;
 | 
						|
		break;
 | 
						|
 | 
						|
	case DRM_MODE_SCALE_ASPECT:
 | 
						|
		/* Scale but preserve the aspect ratio */
 | 
						|
		{
 | 
						|
			u32 scaled_width = adjusted_mode->hdisplay
 | 
						|
				* pipe_config->pipe_src_h;
 | 
						|
			u32 scaled_height = pipe_config->pipe_src_w
 | 
						|
				* adjusted_mode->vdisplay;
 | 
						|
			if (scaled_width > scaled_height) { /* pillar */
 | 
						|
				width = scaled_height / pipe_config->pipe_src_h;
 | 
						|
				if (width & 1)
 | 
						|
					width++;
 | 
						|
				x = (adjusted_mode->hdisplay - width + 1) / 2;
 | 
						|
				y = 0;
 | 
						|
				height = adjusted_mode->vdisplay;
 | 
						|
			} else if (scaled_width < scaled_height) { /* letter */
 | 
						|
				height = scaled_width / pipe_config->pipe_src_w;
 | 
						|
				if (height & 1)
 | 
						|
				    height++;
 | 
						|
				y = (adjusted_mode->vdisplay - height + 1) / 2;
 | 
						|
				x = 0;
 | 
						|
				width = adjusted_mode->hdisplay;
 | 
						|
			} else {
 | 
						|
				x = y = 0;
 | 
						|
				width = adjusted_mode->hdisplay;
 | 
						|
				height = adjusted_mode->vdisplay;
 | 
						|
			}
 | 
						|
		}
 | 
						|
		break;
 | 
						|
 | 
						|
	case DRM_MODE_SCALE_FULLSCREEN:
 | 
						|
		x = y = 0;
 | 
						|
		width = adjusted_mode->hdisplay;
 | 
						|
		height = adjusted_mode->vdisplay;
 | 
						|
		break;
 | 
						|
 | 
						|
	default:
 | 
						|
		WARN(1, "bad panel fit mode: %d\n", fitting_mode);
 | 
						|
		return;
 | 
						|
	}
 | 
						|
 | 
						|
done:
 | 
						|
	pipe_config->pch_pfit.pos = (x << 16) | y;
 | 
						|
	pipe_config->pch_pfit.size = (width << 16) | height;
 | 
						|
	pipe_config->pch_pfit.enabled = pipe_config->pch_pfit.size != 0;
 | 
						|
}
 | 
						|
 | 
						|
static void
 | 
						|
centre_horizontally(struct drm_display_mode *mode,
 | 
						|
		    int width)
 | 
						|
{
 | 
						|
	u32 border, sync_pos, blank_width, sync_width;
 | 
						|
 | 
						|
	/* keep the hsync and hblank widths constant */
 | 
						|
	sync_width = mode->crtc_hsync_end - mode->crtc_hsync_start;
 | 
						|
	blank_width = mode->crtc_hblank_end - mode->crtc_hblank_start;
 | 
						|
	sync_pos = (blank_width - sync_width + 1) / 2;
 | 
						|
 | 
						|
	border = (mode->hdisplay - width + 1) / 2;
 | 
						|
	border += border & 1; /* make the border even */
 | 
						|
 | 
						|
	mode->crtc_hdisplay = width;
 | 
						|
	mode->crtc_hblank_start = width + border;
 | 
						|
	mode->crtc_hblank_end = mode->crtc_hblank_start + blank_width;
 | 
						|
 | 
						|
	mode->crtc_hsync_start = mode->crtc_hblank_start + sync_pos;
 | 
						|
	mode->crtc_hsync_end = mode->crtc_hsync_start + sync_width;
 | 
						|
}
 | 
						|
 | 
						|
static void
 | 
						|
centre_vertically(struct drm_display_mode *mode,
 | 
						|
		  int height)
 | 
						|
{
 | 
						|
	u32 border, sync_pos, blank_width, sync_width;
 | 
						|
 | 
						|
	/* keep the vsync and vblank widths constant */
 | 
						|
	sync_width = mode->crtc_vsync_end - mode->crtc_vsync_start;
 | 
						|
	blank_width = mode->crtc_vblank_end - mode->crtc_vblank_start;
 | 
						|
	sync_pos = (blank_width - sync_width + 1) / 2;
 | 
						|
 | 
						|
	border = (mode->vdisplay - height + 1) / 2;
 | 
						|
 | 
						|
	mode->crtc_vdisplay = height;
 | 
						|
	mode->crtc_vblank_start = height + border;
 | 
						|
	mode->crtc_vblank_end = mode->crtc_vblank_start + blank_width;
 | 
						|
 | 
						|
	mode->crtc_vsync_start = mode->crtc_vblank_start + sync_pos;
 | 
						|
	mode->crtc_vsync_end = mode->crtc_vsync_start + sync_width;
 | 
						|
}
 | 
						|
 | 
						|
static inline u32 panel_fitter_scaling(u32 source, u32 target)
 | 
						|
{
 | 
						|
	/*
 | 
						|
	 * Floating point operation is not supported. So the FACTOR
 | 
						|
	 * is defined, which can avoid the floating point computation
 | 
						|
	 * when calculating the panel ratio.
 | 
						|
	 */
 | 
						|
#define ACCURACY 12
 | 
						|
#define FACTOR (1 << ACCURACY)
 | 
						|
	u32 ratio = source * FACTOR / target;
 | 
						|
	return (FACTOR * ratio + FACTOR/2) / FACTOR;
 | 
						|
}
 | 
						|
 | 
						|
static void i965_scale_aspect(struct intel_crtc_config *pipe_config,
 | 
						|
			      u32 *pfit_control)
 | 
						|
{
 | 
						|
	struct drm_display_mode *adjusted_mode = &pipe_config->adjusted_mode;
 | 
						|
	u32 scaled_width = adjusted_mode->hdisplay *
 | 
						|
		pipe_config->pipe_src_h;
 | 
						|
	u32 scaled_height = pipe_config->pipe_src_w *
 | 
						|
		adjusted_mode->vdisplay;
 | 
						|
 | 
						|
	/* 965+ is easy, it does everything in hw */
 | 
						|
	if (scaled_width > scaled_height)
 | 
						|
		*pfit_control |= PFIT_ENABLE |
 | 
						|
			PFIT_SCALING_PILLAR;
 | 
						|
	else if (scaled_width < scaled_height)
 | 
						|
		*pfit_control |= PFIT_ENABLE |
 | 
						|
			PFIT_SCALING_LETTER;
 | 
						|
	else if (adjusted_mode->hdisplay != pipe_config->pipe_src_w)
 | 
						|
		*pfit_control |= PFIT_ENABLE | PFIT_SCALING_AUTO;
 | 
						|
}
 | 
						|
 | 
						|
static void i9xx_scale_aspect(struct intel_crtc_config *pipe_config,
 | 
						|
			      u32 *pfit_control, u32 *pfit_pgm_ratios,
 | 
						|
			      u32 *border)
 | 
						|
{
 | 
						|
	struct drm_display_mode *adjusted_mode = &pipe_config->adjusted_mode;
 | 
						|
	u32 scaled_width = adjusted_mode->hdisplay *
 | 
						|
		pipe_config->pipe_src_h;
 | 
						|
	u32 scaled_height = pipe_config->pipe_src_w *
 | 
						|
		adjusted_mode->vdisplay;
 | 
						|
	u32 bits;
 | 
						|
 | 
						|
	/*
 | 
						|
	 * For earlier chips we have to calculate the scaling
 | 
						|
	 * ratio by hand and program it into the
 | 
						|
	 * PFIT_PGM_RATIO register
 | 
						|
	 */
 | 
						|
	if (scaled_width > scaled_height) { /* pillar */
 | 
						|
		centre_horizontally(adjusted_mode,
 | 
						|
				    scaled_height /
 | 
						|
				    pipe_config->pipe_src_h);
 | 
						|
 | 
						|
		*border = LVDS_BORDER_ENABLE;
 | 
						|
		if (pipe_config->pipe_src_h != adjusted_mode->vdisplay) {
 | 
						|
			bits = panel_fitter_scaling(pipe_config->pipe_src_h,
 | 
						|
						    adjusted_mode->vdisplay);
 | 
						|
 | 
						|
			*pfit_pgm_ratios |= (bits << PFIT_HORIZ_SCALE_SHIFT |
 | 
						|
					     bits << PFIT_VERT_SCALE_SHIFT);
 | 
						|
			*pfit_control |= (PFIT_ENABLE |
 | 
						|
					  VERT_INTERP_BILINEAR |
 | 
						|
					  HORIZ_INTERP_BILINEAR);
 | 
						|
		}
 | 
						|
	} else if (scaled_width < scaled_height) { /* letter */
 | 
						|
		centre_vertically(adjusted_mode,
 | 
						|
				  scaled_width /
 | 
						|
				  pipe_config->pipe_src_w);
 | 
						|
 | 
						|
		*border = LVDS_BORDER_ENABLE;
 | 
						|
		if (pipe_config->pipe_src_w != adjusted_mode->hdisplay) {
 | 
						|
			bits = panel_fitter_scaling(pipe_config->pipe_src_w,
 | 
						|
						    adjusted_mode->hdisplay);
 | 
						|
 | 
						|
			*pfit_pgm_ratios |= (bits << PFIT_HORIZ_SCALE_SHIFT |
 | 
						|
					     bits << PFIT_VERT_SCALE_SHIFT);
 | 
						|
			*pfit_control |= (PFIT_ENABLE |
 | 
						|
					  VERT_INTERP_BILINEAR |
 | 
						|
					  HORIZ_INTERP_BILINEAR);
 | 
						|
		}
 | 
						|
	} else {
 | 
						|
		/* Aspects match, Let hw scale both directions */
 | 
						|
		*pfit_control |= (PFIT_ENABLE |
 | 
						|
				  VERT_AUTO_SCALE | HORIZ_AUTO_SCALE |
 | 
						|
				  VERT_INTERP_BILINEAR |
 | 
						|
				  HORIZ_INTERP_BILINEAR);
 | 
						|
	}
 | 
						|
}
 | 
						|
 | 
						|
void intel_gmch_panel_fitting(struct intel_crtc *intel_crtc,
 | 
						|
			      struct intel_crtc_config *pipe_config,
 | 
						|
			      int fitting_mode)
 | 
						|
{
 | 
						|
	struct drm_device *dev = intel_crtc->base.dev;
 | 
						|
	u32 pfit_control = 0, pfit_pgm_ratios = 0, border = 0;
 | 
						|
	struct drm_display_mode *adjusted_mode;
 | 
						|
 | 
						|
	adjusted_mode = &pipe_config->adjusted_mode;
 | 
						|
 | 
						|
	/* Native modes don't need fitting */
 | 
						|
	if (adjusted_mode->hdisplay == pipe_config->pipe_src_w &&
 | 
						|
	    adjusted_mode->vdisplay == pipe_config->pipe_src_h)
 | 
						|
		goto out;
 | 
						|
 | 
						|
	switch (fitting_mode) {
 | 
						|
	case DRM_MODE_SCALE_CENTER:
 | 
						|
		/*
 | 
						|
		 * For centered modes, we have to calculate border widths &
 | 
						|
		 * heights and modify the values programmed into the CRTC.
 | 
						|
		 */
 | 
						|
		centre_horizontally(adjusted_mode, pipe_config->pipe_src_w);
 | 
						|
		centre_vertically(adjusted_mode, pipe_config->pipe_src_h);
 | 
						|
		border = LVDS_BORDER_ENABLE;
 | 
						|
		break;
 | 
						|
	case DRM_MODE_SCALE_ASPECT:
 | 
						|
		/* Scale but preserve the aspect ratio */
 | 
						|
		if (INTEL_INFO(dev)->gen >= 4)
 | 
						|
			i965_scale_aspect(pipe_config, &pfit_control);
 | 
						|
		else
 | 
						|
			i9xx_scale_aspect(pipe_config, &pfit_control,
 | 
						|
					  &pfit_pgm_ratios, &border);
 | 
						|
		break;
 | 
						|
	case DRM_MODE_SCALE_FULLSCREEN:
 | 
						|
		/*
 | 
						|
		 * Full scaling, even if it changes the aspect ratio.
 | 
						|
		 * Fortunately this is all done for us in hw.
 | 
						|
		 */
 | 
						|
		if (pipe_config->pipe_src_h != adjusted_mode->vdisplay ||
 | 
						|
		    pipe_config->pipe_src_w != adjusted_mode->hdisplay) {
 | 
						|
			pfit_control |= PFIT_ENABLE;
 | 
						|
			if (INTEL_INFO(dev)->gen >= 4)
 | 
						|
				pfit_control |= PFIT_SCALING_AUTO;
 | 
						|
			else
 | 
						|
				pfit_control |= (VERT_AUTO_SCALE |
 | 
						|
						 VERT_INTERP_BILINEAR |
 | 
						|
						 HORIZ_AUTO_SCALE |
 | 
						|
						 HORIZ_INTERP_BILINEAR);
 | 
						|
		}
 | 
						|
		break;
 | 
						|
	default:
 | 
						|
		WARN(1, "bad panel fit mode: %d\n", fitting_mode);
 | 
						|
		return;
 | 
						|
	}
 | 
						|
 | 
						|
	/* 965+ wants fuzzy fitting */
 | 
						|
	/* FIXME: handle multiple panels by failing gracefully */
 | 
						|
	if (INTEL_INFO(dev)->gen >= 4)
 | 
						|
		pfit_control |= ((intel_crtc->pipe << PFIT_PIPE_SHIFT) |
 | 
						|
				 PFIT_FILTER_FUZZY);
 | 
						|
 | 
						|
out:
 | 
						|
	if ((pfit_control & PFIT_ENABLE) == 0) {
 | 
						|
		pfit_control = 0;
 | 
						|
		pfit_pgm_ratios = 0;
 | 
						|
	}
 | 
						|
 | 
						|
	/* Make sure pre-965 set dither correctly for 18bpp panels. */
 | 
						|
	if (INTEL_INFO(dev)->gen < 4 && pipe_config->pipe_bpp == 18)
 | 
						|
		pfit_control |= PANEL_8TO6_DITHER_ENABLE;
 | 
						|
 | 
						|
	pipe_config->gmch_pfit.control = pfit_control;
 | 
						|
	pipe_config->gmch_pfit.pgm_ratios = pfit_pgm_ratios;
 | 
						|
	pipe_config->gmch_pfit.lvds_border_bits = border;
 | 
						|
}
 | 
						|
 | 
						|
enum drm_connector_status
 | 
						|
intel_panel_detect(struct drm_device *dev)
 | 
						|
{
 | 
						|
	struct drm_i915_private *dev_priv = dev->dev_private;
 | 
						|
 | 
						|
	/* Assume that the BIOS does not lie through the OpRegion... */
 | 
						|
	if (!i915.panel_ignore_lid && dev_priv->opregion.lid_state) {
 | 
						|
		return ioread32(dev_priv->opregion.lid_state) & 0x1 ?
 | 
						|
			connector_status_connected :
 | 
						|
			connector_status_disconnected;
 | 
						|
	}
 | 
						|
 | 
						|
	switch (i915.panel_ignore_lid) {
 | 
						|
	case -2:
 | 
						|
		return connector_status_connected;
 | 
						|
	case -1:
 | 
						|
		return connector_status_disconnected;
 | 
						|
	default:
 | 
						|
		return connector_status_unknown;
 | 
						|
	}
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 * scale - scale values from one range to another
 | 
						|
 *
 | 
						|
 * @source_val: value in range [@source_min..@source_max]
 | 
						|
 *
 | 
						|
 * Return @source_val in range [@source_min..@source_max] scaled to range
 | 
						|
 * [@target_min..@target_max].
 | 
						|
 */
 | 
						|
static uint32_t scale(uint32_t source_val,
 | 
						|
		      uint32_t source_min, uint32_t source_max,
 | 
						|
		      uint32_t target_min, uint32_t target_max)
 | 
						|
{
 | 
						|
	uint64_t target_val;
 | 
						|
 | 
						|
	WARN_ON(source_min > source_max);
 | 
						|
	WARN_ON(target_min > target_max);
 | 
						|
 | 
						|
	/* defensive */
 | 
						|
	source_val = clamp(source_val, source_min, source_max);
 | 
						|
 | 
						|
	/* avoid overflows */
 | 
						|
	target_val = (uint64_t)(source_val - source_min) *
 | 
						|
		(target_max - target_min);
 | 
						|
	do_div(target_val, source_max - source_min);
 | 
						|
	target_val += target_min;
 | 
						|
 | 
						|
	return target_val;
 | 
						|
}
 | 
						|
 | 
						|
/* Scale user_level in range [0..user_max] to [hw_min..hw_max]. */
 | 
						|
static inline u32 scale_user_to_hw(struct intel_connector *connector,
 | 
						|
				   u32 user_level, u32 user_max)
 | 
						|
{
 | 
						|
	struct intel_panel *panel = &connector->panel;
 | 
						|
 | 
						|
	return scale(user_level, 0, user_max,
 | 
						|
		     panel->backlight.min, panel->backlight.max);
 | 
						|
}
 | 
						|
 | 
						|
/* Scale user_level in range [0..user_max] to [0..hw_max], clamping the result
 | 
						|
 * to [hw_min..hw_max]. */
 | 
						|
static inline u32 clamp_user_to_hw(struct intel_connector *connector,
 | 
						|
				   u32 user_level, u32 user_max)
 | 
						|
{
 | 
						|
	struct intel_panel *panel = &connector->panel;
 | 
						|
	u32 hw_level;
 | 
						|
 | 
						|
	hw_level = scale(user_level, 0, user_max, 0, panel->backlight.max);
 | 
						|
	hw_level = clamp(hw_level, panel->backlight.min, panel->backlight.max);
 | 
						|
 | 
						|
	return hw_level;
 | 
						|
}
 | 
						|
 | 
						|
/* Scale hw_level in range [hw_min..hw_max] to [0..user_max]. */
 | 
						|
static inline u32 scale_hw_to_user(struct intel_connector *connector,
 | 
						|
				   u32 hw_level, u32 user_max)
 | 
						|
{
 | 
						|
	struct intel_panel *panel = &connector->panel;
 | 
						|
 | 
						|
	return scale(hw_level, panel->backlight.min, panel->backlight.max,
 | 
						|
		     0, user_max);
 | 
						|
}
 | 
						|
 | 
						|
static u32 intel_panel_compute_brightness(struct intel_connector *connector,
 | 
						|
					  u32 val)
 | 
						|
{
 | 
						|
	struct drm_device *dev = connector->base.dev;
 | 
						|
	struct drm_i915_private *dev_priv = dev->dev_private;
 | 
						|
	struct intel_panel *panel = &connector->panel;
 | 
						|
 | 
						|
	WARN_ON(panel->backlight.max == 0);
 | 
						|
 | 
						|
	if (i915.invert_brightness < 0)
 | 
						|
		return val;
 | 
						|
 | 
						|
	if (i915.invert_brightness > 0 ||
 | 
						|
	    dev_priv->quirks & QUIRK_INVERT_BRIGHTNESS) {
 | 
						|
		return panel->backlight.max - val;
 | 
						|
	}
 | 
						|
 | 
						|
	return val;
 | 
						|
}
 | 
						|
 | 
						|
static u32 bdw_get_backlight(struct intel_connector *connector)
 | 
						|
{
 | 
						|
	struct drm_device *dev = connector->base.dev;
 | 
						|
	struct drm_i915_private *dev_priv = dev->dev_private;
 | 
						|
 | 
						|
	return I915_READ(BLC_PWM_PCH_CTL2) & BACKLIGHT_DUTY_CYCLE_MASK;
 | 
						|
}
 | 
						|
 | 
						|
static u32 pch_get_backlight(struct intel_connector *connector)
 | 
						|
{
 | 
						|
	struct drm_device *dev = connector->base.dev;
 | 
						|
	struct drm_i915_private *dev_priv = dev->dev_private;
 | 
						|
 | 
						|
	return I915_READ(BLC_PWM_CPU_CTL) & BACKLIGHT_DUTY_CYCLE_MASK;
 | 
						|
}
 | 
						|
 | 
						|
static u32 i9xx_get_backlight(struct intel_connector *connector)
 | 
						|
{
 | 
						|
	struct drm_device *dev = connector->base.dev;
 | 
						|
	struct drm_i915_private *dev_priv = dev->dev_private;
 | 
						|
	struct intel_panel *panel = &connector->panel;
 | 
						|
	u32 val;
 | 
						|
 | 
						|
	val = I915_READ(BLC_PWM_CTL) & BACKLIGHT_DUTY_CYCLE_MASK;
 | 
						|
	if (INTEL_INFO(dev)->gen < 4)
 | 
						|
		val >>= 1;
 | 
						|
 | 
						|
	if (panel->backlight.combination_mode) {
 | 
						|
		u8 lbpc;
 | 
						|
 | 
						|
		pci_read_config_byte(dev->pdev, PCI_LBPC, &lbpc);
 | 
						|
		val *= lbpc;
 | 
						|
	}
 | 
						|
 | 
						|
	return val;
 | 
						|
}
 | 
						|
 | 
						|
static u32 _vlv_get_backlight(struct drm_device *dev, enum pipe pipe)
 | 
						|
{
 | 
						|
	struct drm_i915_private *dev_priv = dev->dev_private;
 | 
						|
 | 
						|
	return I915_READ(VLV_BLC_PWM_CTL(pipe)) & BACKLIGHT_DUTY_CYCLE_MASK;
 | 
						|
}
 | 
						|
 | 
						|
static u32 vlv_get_backlight(struct intel_connector *connector)
 | 
						|
{
 | 
						|
	struct drm_device *dev = connector->base.dev;
 | 
						|
	enum pipe pipe = intel_get_pipe_from_connector(connector);
 | 
						|
 | 
						|
	return _vlv_get_backlight(dev, pipe);
 | 
						|
}
 | 
						|
 | 
						|
static u32 intel_panel_get_backlight(struct intel_connector *connector)
 | 
						|
{
 | 
						|
	struct drm_device *dev = connector->base.dev;
 | 
						|
	struct drm_i915_private *dev_priv = dev->dev_private;
 | 
						|
	u32 val;
 | 
						|
	unsigned long flags;
 | 
						|
 | 
						|
	spin_lock_irqsave(&dev_priv->backlight_lock, flags);
 | 
						|
 | 
						|
	val = dev_priv->display.get_backlight(connector);
 | 
						|
	val = intel_panel_compute_brightness(connector, val);
 | 
						|
 | 
						|
	spin_unlock_irqrestore(&dev_priv->backlight_lock, flags);
 | 
						|
 | 
						|
	DRM_DEBUG_DRIVER("get backlight PWM = %d\n", val);
 | 
						|
	return val;
 | 
						|
}
 | 
						|
 | 
						|
static void bdw_set_backlight(struct intel_connector *connector, u32 level)
 | 
						|
{
 | 
						|
	struct drm_device *dev = connector->base.dev;
 | 
						|
	struct drm_i915_private *dev_priv = dev->dev_private;
 | 
						|
	u32 val = I915_READ(BLC_PWM_PCH_CTL2) & ~BACKLIGHT_DUTY_CYCLE_MASK;
 | 
						|
	I915_WRITE(BLC_PWM_PCH_CTL2, val | level);
 | 
						|
}
 | 
						|
 | 
						|
static void pch_set_backlight(struct intel_connector *connector, u32 level)
 | 
						|
{
 | 
						|
	struct drm_device *dev = connector->base.dev;
 | 
						|
	struct drm_i915_private *dev_priv = dev->dev_private;
 | 
						|
	u32 tmp;
 | 
						|
 | 
						|
	tmp = I915_READ(BLC_PWM_CPU_CTL) & ~BACKLIGHT_DUTY_CYCLE_MASK;
 | 
						|
	I915_WRITE(BLC_PWM_CPU_CTL, tmp | level);
 | 
						|
}
 | 
						|
 | 
						|
static void i9xx_set_backlight(struct intel_connector *connector, u32 level)
 | 
						|
{
 | 
						|
	struct drm_device *dev = connector->base.dev;
 | 
						|
	struct drm_i915_private *dev_priv = dev->dev_private;
 | 
						|
	struct intel_panel *panel = &connector->panel;
 | 
						|
	u32 tmp, mask;
 | 
						|
 | 
						|
	WARN_ON(panel->backlight.max == 0);
 | 
						|
 | 
						|
	if (panel->backlight.combination_mode) {
 | 
						|
		u8 lbpc;
 | 
						|
 | 
						|
		lbpc = level * 0xfe / panel->backlight.max + 1;
 | 
						|
		level /= lbpc;
 | 
						|
		pci_write_config_byte(dev->pdev, PCI_LBPC, lbpc);
 | 
						|
	}
 | 
						|
 | 
						|
	if (IS_GEN4(dev)) {
 | 
						|
		mask = BACKLIGHT_DUTY_CYCLE_MASK;
 | 
						|
	} else {
 | 
						|
		level <<= 1;
 | 
						|
		mask = BACKLIGHT_DUTY_CYCLE_MASK_PNV;
 | 
						|
	}
 | 
						|
 | 
						|
	tmp = I915_READ(BLC_PWM_CTL) & ~mask;
 | 
						|
	I915_WRITE(BLC_PWM_CTL, tmp | level);
 | 
						|
}
 | 
						|
 | 
						|
static void vlv_set_backlight(struct intel_connector *connector, u32 level)
 | 
						|
{
 | 
						|
	struct drm_device *dev = connector->base.dev;
 | 
						|
	struct drm_i915_private *dev_priv = dev->dev_private;
 | 
						|
	enum pipe pipe = intel_get_pipe_from_connector(connector);
 | 
						|
	u32 tmp;
 | 
						|
 | 
						|
	tmp = I915_READ(VLV_BLC_PWM_CTL(pipe)) & ~BACKLIGHT_DUTY_CYCLE_MASK;
 | 
						|
	I915_WRITE(VLV_BLC_PWM_CTL(pipe), tmp | level);
 | 
						|
}
 | 
						|
 | 
						|
static void
 | 
						|
intel_panel_actually_set_backlight(struct intel_connector *connector, u32 level)
 | 
						|
{
 | 
						|
	struct drm_device *dev = connector->base.dev;
 | 
						|
	struct drm_i915_private *dev_priv = dev->dev_private;
 | 
						|
 | 
						|
	DRM_DEBUG_DRIVER("set backlight PWM = %d\n", level);
 | 
						|
 | 
						|
	level = intel_panel_compute_brightness(connector, level);
 | 
						|
	dev_priv->display.set_backlight(connector, level);
 | 
						|
}
 | 
						|
 | 
						|
/* set backlight brightness to level in range [0..max], scaling wrt hw min */
 | 
						|
static void intel_panel_set_backlight(struct intel_connector *connector,
 | 
						|
				      u32 user_level, u32 user_max)
 | 
						|
{
 | 
						|
	struct drm_device *dev = connector->base.dev;
 | 
						|
	struct drm_i915_private *dev_priv = dev->dev_private;
 | 
						|
	struct intel_panel *panel = &connector->panel;
 | 
						|
	enum pipe pipe = intel_get_pipe_from_connector(connector);
 | 
						|
	u32 hw_level;
 | 
						|
	unsigned long flags;
 | 
						|
 | 
						|
	if (!panel->backlight.present || pipe == INVALID_PIPE)
 | 
						|
		return;
 | 
						|
 | 
						|
	spin_lock_irqsave(&dev_priv->backlight_lock, flags);
 | 
						|
 | 
						|
	WARN_ON(panel->backlight.max == 0);
 | 
						|
 | 
						|
	hw_level = scale_user_to_hw(connector, user_level, user_max);
 | 
						|
	panel->backlight.level = hw_level;
 | 
						|
 | 
						|
	if (panel->backlight.enabled)
 | 
						|
		intel_panel_actually_set_backlight(connector, hw_level);
 | 
						|
 | 
						|
	spin_unlock_irqrestore(&dev_priv->backlight_lock, flags);
 | 
						|
}
 | 
						|
 | 
						|
/* set backlight brightness to level in range [0..max], assuming hw min is
 | 
						|
 * respected.
 | 
						|
 */
 | 
						|
void intel_panel_set_backlight_acpi(struct intel_connector *connector,
 | 
						|
				    u32 user_level, u32 user_max)
 | 
						|
{
 | 
						|
	struct drm_device *dev = connector->base.dev;
 | 
						|
	struct drm_i915_private *dev_priv = dev->dev_private;
 | 
						|
	struct intel_panel *panel = &connector->panel;
 | 
						|
	enum pipe pipe = intel_get_pipe_from_connector(connector);
 | 
						|
	u32 hw_level;
 | 
						|
	unsigned long flags;
 | 
						|
 | 
						|
	if (!panel->backlight.present || pipe == INVALID_PIPE)
 | 
						|
		return;
 | 
						|
 | 
						|
	spin_lock_irqsave(&dev_priv->backlight_lock, flags);
 | 
						|
 | 
						|
	WARN_ON(panel->backlight.max == 0);
 | 
						|
 | 
						|
	hw_level = clamp_user_to_hw(connector, user_level, user_max);
 | 
						|
	panel->backlight.level = hw_level;
 | 
						|
 | 
						|
	if (panel->backlight.device)
 | 
						|
		panel->backlight.device->props.brightness =
 | 
						|
			scale_hw_to_user(connector,
 | 
						|
					 panel->backlight.level,
 | 
						|
					 panel->backlight.device->props.max_brightness);
 | 
						|
 | 
						|
	if (panel->backlight.enabled)
 | 
						|
		intel_panel_actually_set_backlight(connector, hw_level);
 | 
						|
 | 
						|
	spin_unlock_irqrestore(&dev_priv->backlight_lock, flags);
 | 
						|
}
 | 
						|
 | 
						|
static void pch_disable_backlight(struct intel_connector *connector)
 | 
						|
{
 | 
						|
	struct drm_device *dev = connector->base.dev;
 | 
						|
	struct drm_i915_private *dev_priv = dev->dev_private;
 | 
						|
	u32 tmp;
 | 
						|
 | 
						|
	intel_panel_actually_set_backlight(connector, 0);
 | 
						|
 | 
						|
	tmp = I915_READ(BLC_PWM_CPU_CTL2);
 | 
						|
	I915_WRITE(BLC_PWM_CPU_CTL2, tmp & ~BLM_PWM_ENABLE);
 | 
						|
 | 
						|
	tmp = I915_READ(BLC_PWM_PCH_CTL1);
 | 
						|
	I915_WRITE(BLC_PWM_PCH_CTL1, tmp & ~BLM_PCH_PWM_ENABLE);
 | 
						|
}
 | 
						|
 | 
						|
static void i9xx_disable_backlight(struct intel_connector *connector)
 | 
						|
{
 | 
						|
	intel_panel_actually_set_backlight(connector, 0);
 | 
						|
}
 | 
						|
 | 
						|
static void i965_disable_backlight(struct intel_connector *connector)
 | 
						|
{
 | 
						|
	struct drm_device *dev = connector->base.dev;
 | 
						|
	struct drm_i915_private *dev_priv = dev->dev_private;
 | 
						|
	u32 tmp;
 | 
						|
 | 
						|
	intel_panel_actually_set_backlight(connector, 0);
 | 
						|
 | 
						|
	tmp = I915_READ(BLC_PWM_CTL2);
 | 
						|
	I915_WRITE(BLC_PWM_CTL2, tmp & ~BLM_PWM_ENABLE);
 | 
						|
}
 | 
						|
 | 
						|
static void vlv_disable_backlight(struct intel_connector *connector)
 | 
						|
{
 | 
						|
	struct drm_device *dev = connector->base.dev;
 | 
						|
	struct drm_i915_private *dev_priv = dev->dev_private;
 | 
						|
	enum pipe pipe = intel_get_pipe_from_connector(connector);
 | 
						|
	u32 tmp;
 | 
						|
 | 
						|
	intel_panel_actually_set_backlight(connector, 0);
 | 
						|
 | 
						|
	tmp = I915_READ(VLV_BLC_PWM_CTL2(pipe));
 | 
						|
	I915_WRITE(VLV_BLC_PWM_CTL2(pipe), tmp & ~BLM_PWM_ENABLE);
 | 
						|
}
 | 
						|
 | 
						|
void intel_panel_disable_backlight(struct intel_connector *connector)
 | 
						|
{
 | 
						|
	struct drm_device *dev = connector->base.dev;
 | 
						|
	struct drm_i915_private *dev_priv = dev->dev_private;
 | 
						|
	struct intel_panel *panel = &connector->panel;
 | 
						|
	enum pipe pipe = intel_get_pipe_from_connector(connector);
 | 
						|
	unsigned long flags;
 | 
						|
 | 
						|
	if (!panel->backlight.present || pipe == INVALID_PIPE)
 | 
						|
		return;
 | 
						|
 | 
						|
	/*
 | 
						|
	 * Do not disable backlight on the vgaswitcheroo path. When switching
 | 
						|
	 * away from i915, the other client may depend on i915 to handle the
 | 
						|
	 * backlight. This will leave the backlight on unnecessarily when
 | 
						|
	 * another client is not activated.
 | 
						|
	 */
 | 
						|
	if (dev->switch_power_state == DRM_SWITCH_POWER_CHANGING) {
 | 
						|
		DRM_DEBUG_DRIVER("Skipping backlight disable on vga switch\n");
 | 
						|
		return;
 | 
						|
	}
 | 
						|
 | 
						|
	spin_lock_irqsave(&dev_priv->backlight_lock, flags);
 | 
						|
 | 
						|
	if (panel->backlight.device)
 | 
						|
		panel->backlight.device->props.power = FB_BLANK_POWERDOWN;
 | 
						|
	panel->backlight.enabled = false;
 | 
						|
	dev_priv->display.disable_backlight(connector);
 | 
						|
 | 
						|
	spin_unlock_irqrestore(&dev_priv->backlight_lock, flags);
 | 
						|
}
 | 
						|
 | 
						|
static void bdw_enable_backlight(struct intel_connector *connector)
 | 
						|
{
 | 
						|
	struct drm_device *dev = connector->base.dev;
 | 
						|
	struct drm_i915_private *dev_priv = dev->dev_private;
 | 
						|
	struct intel_panel *panel = &connector->panel;
 | 
						|
	u32 pch_ctl1, pch_ctl2;
 | 
						|
 | 
						|
	pch_ctl1 = I915_READ(BLC_PWM_PCH_CTL1);
 | 
						|
	if (pch_ctl1 & BLM_PCH_PWM_ENABLE) {
 | 
						|
		DRM_DEBUG_KMS("pch backlight already enabled\n");
 | 
						|
		pch_ctl1 &= ~BLM_PCH_PWM_ENABLE;
 | 
						|
		I915_WRITE(BLC_PWM_PCH_CTL1, pch_ctl1);
 | 
						|
	}
 | 
						|
 | 
						|
	pch_ctl2 = panel->backlight.max << 16;
 | 
						|
	I915_WRITE(BLC_PWM_PCH_CTL2, pch_ctl2);
 | 
						|
 | 
						|
	pch_ctl1 = 0;
 | 
						|
	if (panel->backlight.active_low_pwm)
 | 
						|
		pch_ctl1 |= BLM_PCH_POLARITY;
 | 
						|
 | 
						|
	/* BDW always uses the pch pwm controls. */
 | 
						|
	pch_ctl1 |= BLM_PCH_OVERRIDE_ENABLE;
 | 
						|
 | 
						|
	I915_WRITE(BLC_PWM_PCH_CTL1, pch_ctl1);
 | 
						|
	POSTING_READ(BLC_PWM_PCH_CTL1);
 | 
						|
	I915_WRITE(BLC_PWM_PCH_CTL1, pch_ctl1 | BLM_PCH_PWM_ENABLE);
 | 
						|
 | 
						|
	/* This won't stick until the above enable. */
 | 
						|
	intel_panel_actually_set_backlight(connector, panel->backlight.level);
 | 
						|
}
 | 
						|
 | 
						|
static void pch_enable_backlight(struct intel_connector *connector)
 | 
						|
{
 | 
						|
	struct drm_device *dev = connector->base.dev;
 | 
						|
	struct drm_i915_private *dev_priv = dev->dev_private;
 | 
						|
	struct intel_panel *panel = &connector->panel;
 | 
						|
	enum pipe pipe = intel_get_pipe_from_connector(connector);
 | 
						|
	enum transcoder cpu_transcoder =
 | 
						|
		intel_pipe_to_cpu_transcoder(dev_priv, pipe);
 | 
						|
	u32 cpu_ctl2, pch_ctl1, pch_ctl2;
 | 
						|
 | 
						|
	cpu_ctl2 = I915_READ(BLC_PWM_CPU_CTL2);
 | 
						|
	if (cpu_ctl2 & BLM_PWM_ENABLE) {
 | 
						|
		DRM_DEBUG_KMS("cpu backlight already enabled\n");
 | 
						|
		cpu_ctl2 &= ~BLM_PWM_ENABLE;
 | 
						|
		I915_WRITE(BLC_PWM_CPU_CTL2, cpu_ctl2);
 | 
						|
	}
 | 
						|
 | 
						|
	pch_ctl1 = I915_READ(BLC_PWM_PCH_CTL1);
 | 
						|
	if (pch_ctl1 & BLM_PCH_PWM_ENABLE) {
 | 
						|
		DRM_DEBUG_KMS("pch backlight already enabled\n");
 | 
						|
		pch_ctl1 &= ~BLM_PCH_PWM_ENABLE;
 | 
						|
		I915_WRITE(BLC_PWM_PCH_CTL1, pch_ctl1);
 | 
						|
	}
 | 
						|
 | 
						|
	if (cpu_transcoder == TRANSCODER_EDP)
 | 
						|
		cpu_ctl2 = BLM_TRANSCODER_EDP;
 | 
						|
	else
 | 
						|
		cpu_ctl2 = BLM_PIPE(cpu_transcoder);
 | 
						|
	I915_WRITE(BLC_PWM_CPU_CTL2, cpu_ctl2);
 | 
						|
	POSTING_READ(BLC_PWM_CPU_CTL2);
 | 
						|
	I915_WRITE(BLC_PWM_CPU_CTL2, cpu_ctl2 | BLM_PWM_ENABLE);
 | 
						|
 | 
						|
	/* This won't stick until the above enable. */
 | 
						|
	intel_panel_actually_set_backlight(connector, panel->backlight.level);
 | 
						|
 | 
						|
	pch_ctl2 = panel->backlight.max << 16;
 | 
						|
	I915_WRITE(BLC_PWM_PCH_CTL2, pch_ctl2);
 | 
						|
 | 
						|
	pch_ctl1 = 0;
 | 
						|
	if (panel->backlight.active_low_pwm)
 | 
						|
		pch_ctl1 |= BLM_PCH_POLARITY;
 | 
						|
 | 
						|
	I915_WRITE(BLC_PWM_PCH_CTL1, pch_ctl1);
 | 
						|
	POSTING_READ(BLC_PWM_PCH_CTL1);
 | 
						|
	I915_WRITE(BLC_PWM_PCH_CTL1, pch_ctl1 | BLM_PCH_PWM_ENABLE);
 | 
						|
}
 | 
						|
 | 
						|
static void i9xx_enable_backlight(struct intel_connector *connector)
 | 
						|
{
 | 
						|
	struct drm_device *dev = connector->base.dev;
 | 
						|
	struct drm_i915_private *dev_priv = dev->dev_private;
 | 
						|
	struct intel_panel *panel = &connector->panel;
 | 
						|
	u32 ctl, freq;
 | 
						|
 | 
						|
	ctl = I915_READ(BLC_PWM_CTL);
 | 
						|
	if (ctl & BACKLIGHT_DUTY_CYCLE_MASK_PNV) {
 | 
						|
		DRM_DEBUG_KMS("backlight already enabled\n");
 | 
						|
		I915_WRITE(BLC_PWM_CTL, 0);
 | 
						|
	}
 | 
						|
 | 
						|
	freq = panel->backlight.max;
 | 
						|
	if (panel->backlight.combination_mode)
 | 
						|
		freq /= 0xff;
 | 
						|
 | 
						|
	ctl = freq << 17;
 | 
						|
	if (panel->backlight.combination_mode)
 | 
						|
		ctl |= BLM_LEGACY_MODE;
 | 
						|
	if (IS_PINEVIEW(dev) && panel->backlight.active_low_pwm)
 | 
						|
		ctl |= BLM_POLARITY_PNV;
 | 
						|
 | 
						|
	I915_WRITE(BLC_PWM_CTL, ctl);
 | 
						|
	POSTING_READ(BLC_PWM_CTL);
 | 
						|
 | 
						|
	/* XXX: combine this into above write? */
 | 
						|
	intel_panel_actually_set_backlight(connector, panel->backlight.level);
 | 
						|
}
 | 
						|
 | 
						|
static void i965_enable_backlight(struct intel_connector *connector)
 | 
						|
{
 | 
						|
	struct drm_device *dev = connector->base.dev;
 | 
						|
	struct drm_i915_private *dev_priv = dev->dev_private;
 | 
						|
	struct intel_panel *panel = &connector->panel;
 | 
						|
	enum pipe pipe = intel_get_pipe_from_connector(connector);
 | 
						|
	u32 ctl, ctl2, freq;
 | 
						|
 | 
						|
	ctl2 = I915_READ(BLC_PWM_CTL2);
 | 
						|
	if (ctl2 & BLM_PWM_ENABLE) {
 | 
						|
		DRM_DEBUG_KMS("backlight already enabled\n");
 | 
						|
		ctl2 &= ~BLM_PWM_ENABLE;
 | 
						|
		I915_WRITE(BLC_PWM_CTL2, ctl2);
 | 
						|
	}
 | 
						|
 | 
						|
	freq = panel->backlight.max;
 | 
						|
	if (panel->backlight.combination_mode)
 | 
						|
		freq /= 0xff;
 | 
						|
 | 
						|
	ctl = freq << 16;
 | 
						|
	I915_WRITE(BLC_PWM_CTL, ctl);
 | 
						|
 | 
						|
	ctl2 = BLM_PIPE(pipe);
 | 
						|
	if (panel->backlight.combination_mode)
 | 
						|
		ctl2 |= BLM_COMBINATION_MODE;
 | 
						|
	if (panel->backlight.active_low_pwm)
 | 
						|
		ctl2 |= BLM_POLARITY_I965;
 | 
						|
	I915_WRITE(BLC_PWM_CTL2, ctl2);
 | 
						|
	POSTING_READ(BLC_PWM_CTL2);
 | 
						|
	I915_WRITE(BLC_PWM_CTL2, ctl2 | BLM_PWM_ENABLE);
 | 
						|
 | 
						|
	intel_panel_actually_set_backlight(connector, panel->backlight.level);
 | 
						|
}
 | 
						|
 | 
						|
static void vlv_enable_backlight(struct intel_connector *connector)
 | 
						|
{
 | 
						|
	struct drm_device *dev = connector->base.dev;
 | 
						|
	struct drm_i915_private *dev_priv = dev->dev_private;
 | 
						|
	struct intel_panel *panel = &connector->panel;
 | 
						|
	enum pipe pipe = intel_get_pipe_from_connector(connector);
 | 
						|
	u32 ctl, ctl2;
 | 
						|
 | 
						|
	ctl2 = I915_READ(VLV_BLC_PWM_CTL2(pipe));
 | 
						|
	if (ctl2 & BLM_PWM_ENABLE) {
 | 
						|
		DRM_DEBUG_KMS("backlight already enabled\n");
 | 
						|
		ctl2 &= ~BLM_PWM_ENABLE;
 | 
						|
		I915_WRITE(VLV_BLC_PWM_CTL2(pipe), ctl2);
 | 
						|
	}
 | 
						|
 | 
						|
	ctl = panel->backlight.max << 16;
 | 
						|
	I915_WRITE(VLV_BLC_PWM_CTL(pipe), ctl);
 | 
						|
 | 
						|
	/* XXX: combine this into above write? */
 | 
						|
	intel_panel_actually_set_backlight(connector, panel->backlight.level);
 | 
						|
 | 
						|
	ctl2 = 0;
 | 
						|
	if (panel->backlight.active_low_pwm)
 | 
						|
		ctl2 |= BLM_POLARITY_I965;
 | 
						|
	I915_WRITE(VLV_BLC_PWM_CTL2(pipe), ctl2);
 | 
						|
	POSTING_READ(VLV_BLC_PWM_CTL2(pipe));
 | 
						|
	I915_WRITE(VLV_BLC_PWM_CTL2(pipe), ctl2 | BLM_PWM_ENABLE);
 | 
						|
}
 | 
						|
 | 
						|
void intel_panel_enable_backlight(struct intel_connector *connector)
 | 
						|
{
 | 
						|
	struct drm_device *dev = connector->base.dev;
 | 
						|
	struct drm_i915_private *dev_priv = dev->dev_private;
 | 
						|
	struct intel_panel *panel = &connector->panel;
 | 
						|
	enum pipe pipe = intel_get_pipe_from_connector(connector);
 | 
						|
	unsigned long flags;
 | 
						|
 | 
						|
	if (!panel->backlight.present || pipe == INVALID_PIPE)
 | 
						|
		return;
 | 
						|
 | 
						|
	DRM_DEBUG_KMS("pipe %c\n", pipe_name(pipe));
 | 
						|
 | 
						|
	spin_lock_irqsave(&dev_priv->backlight_lock, flags);
 | 
						|
 | 
						|
	WARN_ON(panel->backlight.max == 0);
 | 
						|
 | 
						|
	if (panel->backlight.level == 0) {
 | 
						|
		panel->backlight.level = panel->backlight.max;
 | 
						|
		if (panel->backlight.device)
 | 
						|
			panel->backlight.device->props.brightness =
 | 
						|
				scale_hw_to_user(connector,
 | 
						|
						 panel->backlight.level,
 | 
						|
						 panel->backlight.device->props.max_brightness);
 | 
						|
	}
 | 
						|
 | 
						|
	dev_priv->display.enable_backlight(connector);
 | 
						|
	panel->backlight.enabled = true;
 | 
						|
	if (panel->backlight.device)
 | 
						|
		panel->backlight.device->props.power = FB_BLANK_UNBLANK;
 | 
						|
 | 
						|
	spin_unlock_irqrestore(&dev_priv->backlight_lock, flags);
 | 
						|
}
 | 
						|
 | 
						|
#if IS_ENABLED(CONFIG_BACKLIGHT_CLASS_DEVICE)
 | 
						|
static int intel_backlight_device_update_status(struct backlight_device *bd)
 | 
						|
{
 | 
						|
	struct intel_connector *connector = bl_get_data(bd);
 | 
						|
	struct intel_panel *panel = &connector->panel;
 | 
						|
	struct drm_device *dev = connector->base.dev;
 | 
						|
 | 
						|
	drm_modeset_lock(&dev->mode_config.connection_mutex, NULL);
 | 
						|
	DRM_DEBUG_KMS("updating intel_backlight, brightness=%d/%d\n",
 | 
						|
		      bd->props.brightness, bd->props.max_brightness);
 | 
						|
	intel_panel_set_backlight(connector, bd->props.brightness,
 | 
						|
				  bd->props.max_brightness);
 | 
						|
 | 
						|
	/*
 | 
						|
	 * Allow flipping bl_power as a sub-state of enabled. Sadly the
 | 
						|
	 * backlight class device does not make it easy to to differentiate
 | 
						|
	 * between callbacks for brightness and bl_power, so our backlight_power
 | 
						|
	 * callback needs to take this into account.
 | 
						|
	 */
 | 
						|
	if (panel->backlight.enabled) {
 | 
						|
		if (panel->backlight_power) {
 | 
						|
			bool enable = bd->props.power == FB_BLANK_UNBLANK &&
 | 
						|
				bd->props.brightness != 0;
 | 
						|
			panel->backlight_power(connector, enable);
 | 
						|
		}
 | 
						|
	} else {
 | 
						|
		bd->props.power = FB_BLANK_POWERDOWN;
 | 
						|
	}
 | 
						|
 | 
						|
	drm_modeset_unlock(&dev->mode_config.connection_mutex);
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int intel_backlight_device_get_brightness(struct backlight_device *bd)
 | 
						|
{
 | 
						|
	struct intel_connector *connector = bl_get_data(bd);
 | 
						|
	struct drm_device *dev = connector->base.dev;
 | 
						|
	struct drm_i915_private *dev_priv = dev->dev_private;
 | 
						|
	u32 hw_level;
 | 
						|
	int ret;
 | 
						|
 | 
						|
	intel_runtime_pm_get(dev_priv);
 | 
						|
	drm_modeset_lock(&dev->mode_config.connection_mutex, NULL);
 | 
						|
 | 
						|
	hw_level = intel_panel_get_backlight(connector);
 | 
						|
	ret = scale_hw_to_user(connector, hw_level, bd->props.max_brightness);
 | 
						|
 | 
						|
	drm_modeset_unlock(&dev->mode_config.connection_mutex);
 | 
						|
	intel_runtime_pm_put(dev_priv);
 | 
						|
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
 | 
						|
static const struct backlight_ops intel_backlight_device_ops = {
 | 
						|
	.update_status = intel_backlight_device_update_status,
 | 
						|
	.get_brightness = intel_backlight_device_get_brightness,
 | 
						|
};
 | 
						|
 | 
						|
static int intel_backlight_device_register(struct intel_connector *connector)
 | 
						|
{
 | 
						|
	struct intel_panel *panel = &connector->panel;
 | 
						|
	struct backlight_properties props;
 | 
						|
 | 
						|
	if (WARN_ON(panel->backlight.device))
 | 
						|
		return -ENODEV;
 | 
						|
 | 
						|
	WARN_ON(panel->backlight.max == 0);
 | 
						|
 | 
						|
	memset(&props, 0, sizeof(props));
 | 
						|
	props.type = BACKLIGHT_RAW;
 | 
						|
 | 
						|
	/*
 | 
						|
	 * Note: Everything should work even if the backlight device max
 | 
						|
	 * presented to the userspace is arbitrarily chosen.
 | 
						|
	 */
 | 
						|
	props.max_brightness = panel->backlight.max;
 | 
						|
	props.brightness = scale_hw_to_user(connector,
 | 
						|
					    panel->backlight.level,
 | 
						|
					    props.max_brightness);
 | 
						|
 | 
						|
	if (panel->backlight.enabled)
 | 
						|
		props.power = FB_BLANK_UNBLANK;
 | 
						|
	else
 | 
						|
		props.power = FB_BLANK_POWERDOWN;
 | 
						|
 | 
						|
	/*
 | 
						|
	 * Note: using the same name independent of the connector prevents
 | 
						|
	 * registration of multiple backlight devices in the driver.
 | 
						|
	 */
 | 
						|
	panel->backlight.device =
 | 
						|
		backlight_device_register("intel_backlight",
 | 
						|
					  connector->base.kdev,
 | 
						|
					  connector,
 | 
						|
					  &intel_backlight_device_ops, &props);
 | 
						|
 | 
						|
	if (IS_ERR(panel->backlight.device)) {
 | 
						|
		DRM_ERROR("Failed to register backlight: %ld\n",
 | 
						|
			  PTR_ERR(panel->backlight.device));
 | 
						|
		panel->backlight.device = NULL;
 | 
						|
		return -ENODEV;
 | 
						|
	}
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static void intel_backlight_device_unregister(struct intel_connector *connector)
 | 
						|
{
 | 
						|
	struct intel_panel *panel = &connector->panel;
 | 
						|
 | 
						|
	if (panel->backlight.device) {
 | 
						|
		backlight_device_unregister(panel->backlight.device);
 | 
						|
		panel->backlight.device = NULL;
 | 
						|
	}
 | 
						|
}
 | 
						|
#else /* CONFIG_BACKLIGHT_CLASS_DEVICE */
 | 
						|
static int intel_backlight_device_register(struct intel_connector *connector)
 | 
						|
{
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
static void intel_backlight_device_unregister(struct intel_connector *connector)
 | 
						|
{
 | 
						|
}
 | 
						|
#endif /* CONFIG_BACKLIGHT_CLASS_DEVICE */
 | 
						|
 | 
						|
/*
 | 
						|
 * Note: The setup hooks can't assume pipe is set!
 | 
						|
 *
 | 
						|
 * XXX: Query mode clock or hardware clock and program PWM modulation frequency
 | 
						|
 * appropriately when it's 0. Use VBT and/or sane defaults.
 | 
						|
 */
 | 
						|
static u32 get_backlight_min_vbt(struct intel_connector *connector)
 | 
						|
{
 | 
						|
	struct drm_device *dev = connector->base.dev;
 | 
						|
	struct drm_i915_private *dev_priv = dev->dev_private;
 | 
						|
	struct intel_panel *panel = &connector->panel;
 | 
						|
 | 
						|
	WARN_ON(panel->backlight.max == 0);
 | 
						|
 | 
						|
	/* vbt value is a coefficient in range [0..255] */
 | 
						|
	return scale(dev_priv->vbt.backlight.min_brightness, 0, 255,
 | 
						|
		     0, panel->backlight.max);
 | 
						|
}
 | 
						|
 | 
						|
static int bdw_setup_backlight(struct intel_connector *connector)
 | 
						|
{
 | 
						|
	struct drm_device *dev = connector->base.dev;
 | 
						|
	struct drm_i915_private *dev_priv = dev->dev_private;
 | 
						|
	struct intel_panel *panel = &connector->panel;
 | 
						|
	u32 pch_ctl1, pch_ctl2, val;
 | 
						|
 | 
						|
	pch_ctl1 = I915_READ(BLC_PWM_PCH_CTL1);
 | 
						|
	panel->backlight.active_low_pwm = pch_ctl1 & BLM_PCH_POLARITY;
 | 
						|
 | 
						|
	pch_ctl2 = I915_READ(BLC_PWM_PCH_CTL2);
 | 
						|
	panel->backlight.max = pch_ctl2 >> 16;
 | 
						|
	if (!panel->backlight.max)
 | 
						|
		return -ENODEV;
 | 
						|
 | 
						|
	panel->backlight.min = get_backlight_min_vbt(connector);
 | 
						|
 | 
						|
	val = bdw_get_backlight(connector);
 | 
						|
	panel->backlight.level = intel_panel_compute_brightness(connector, val);
 | 
						|
 | 
						|
	panel->backlight.enabled = (pch_ctl1 & BLM_PCH_PWM_ENABLE) &&
 | 
						|
		panel->backlight.level != 0;
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int pch_setup_backlight(struct intel_connector *connector)
 | 
						|
{
 | 
						|
	struct drm_device *dev = connector->base.dev;
 | 
						|
	struct drm_i915_private *dev_priv = dev->dev_private;
 | 
						|
	struct intel_panel *panel = &connector->panel;
 | 
						|
	u32 cpu_ctl2, pch_ctl1, pch_ctl2, val;
 | 
						|
 | 
						|
	pch_ctl1 = I915_READ(BLC_PWM_PCH_CTL1);
 | 
						|
	panel->backlight.active_low_pwm = pch_ctl1 & BLM_PCH_POLARITY;
 | 
						|
 | 
						|
	pch_ctl2 = I915_READ(BLC_PWM_PCH_CTL2);
 | 
						|
	panel->backlight.max = pch_ctl2 >> 16;
 | 
						|
	if (!panel->backlight.max)
 | 
						|
		return -ENODEV;
 | 
						|
 | 
						|
	panel->backlight.min = get_backlight_min_vbt(connector);
 | 
						|
 | 
						|
	val = pch_get_backlight(connector);
 | 
						|
	panel->backlight.level = intel_panel_compute_brightness(connector, val);
 | 
						|
 | 
						|
	cpu_ctl2 = I915_READ(BLC_PWM_CPU_CTL2);
 | 
						|
	panel->backlight.enabled = (cpu_ctl2 & BLM_PWM_ENABLE) &&
 | 
						|
		(pch_ctl1 & BLM_PCH_PWM_ENABLE) && panel->backlight.level != 0;
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int i9xx_setup_backlight(struct intel_connector *connector)
 | 
						|
{
 | 
						|
	struct drm_device *dev = connector->base.dev;
 | 
						|
	struct drm_i915_private *dev_priv = dev->dev_private;
 | 
						|
	struct intel_panel *panel = &connector->panel;
 | 
						|
	u32 ctl, val;
 | 
						|
 | 
						|
	ctl = I915_READ(BLC_PWM_CTL);
 | 
						|
 | 
						|
	if (IS_GEN2(dev) || IS_I915GM(dev) || IS_I945GM(dev))
 | 
						|
		panel->backlight.combination_mode = ctl & BLM_LEGACY_MODE;
 | 
						|
 | 
						|
	if (IS_PINEVIEW(dev))
 | 
						|
		panel->backlight.active_low_pwm = ctl & BLM_POLARITY_PNV;
 | 
						|
 | 
						|
	panel->backlight.max = ctl >> 17;
 | 
						|
	if (panel->backlight.combination_mode)
 | 
						|
		panel->backlight.max *= 0xff;
 | 
						|
 | 
						|
	if (!panel->backlight.max)
 | 
						|
		return -ENODEV;
 | 
						|
 | 
						|
	panel->backlight.min = get_backlight_min_vbt(connector);
 | 
						|
 | 
						|
	val = i9xx_get_backlight(connector);
 | 
						|
	panel->backlight.level = intel_panel_compute_brightness(connector, val);
 | 
						|
 | 
						|
	panel->backlight.enabled = panel->backlight.level != 0;
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int i965_setup_backlight(struct intel_connector *connector)
 | 
						|
{
 | 
						|
	struct drm_device *dev = connector->base.dev;
 | 
						|
	struct drm_i915_private *dev_priv = dev->dev_private;
 | 
						|
	struct intel_panel *panel = &connector->panel;
 | 
						|
	u32 ctl, ctl2, val;
 | 
						|
 | 
						|
	ctl2 = I915_READ(BLC_PWM_CTL2);
 | 
						|
	panel->backlight.combination_mode = ctl2 & BLM_COMBINATION_MODE;
 | 
						|
	panel->backlight.active_low_pwm = ctl2 & BLM_POLARITY_I965;
 | 
						|
 | 
						|
	ctl = I915_READ(BLC_PWM_CTL);
 | 
						|
	panel->backlight.max = ctl >> 16;
 | 
						|
	if (panel->backlight.combination_mode)
 | 
						|
		panel->backlight.max *= 0xff;
 | 
						|
 | 
						|
	if (!panel->backlight.max)
 | 
						|
		return -ENODEV;
 | 
						|
 | 
						|
	panel->backlight.min = get_backlight_min_vbt(connector);
 | 
						|
 | 
						|
	val = i9xx_get_backlight(connector);
 | 
						|
	panel->backlight.level = intel_panel_compute_brightness(connector, val);
 | 
						|
 | 
						|
	panel->backlight.enabled = (ctl2 & BLM_PWM_ENABLE) &&
 | 
						|
		panel->backlight.level != 0;
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int vlv_setup_backlight(struct intel_connector *connector)
 | 
						|
{
 | 
						|
	struct drm_device *dev = connector->base.dev;
 | 
						|
	struct drm_i915_private *dev_priv = dev->dev_private;
 | 
						|
	struct intel_panel *panel = &connector->panel;
 | 
						|
	enum pipe pipe;
 | 
						|
	u32 ctl, ctl2, val;
 | 
						|
 | 
						|
	for_each_pipe(dev_priv, pipe) {
 | 
						|
		u32 cur_val = I915_READ(VLV_BLC_PWM_CTL(pipe));
 | 
						|
 | 
						|
		/* Skip if the modulation freq is already set */
 | 
						|
		if (cur_val & ~BACKLIGHT_DUTY_CYCLE_MASK)
 | 
						|
			continue;
 | 
						|
 | 
						|
		cur_val &= BACKLIGHT_DUTY_CYCLE_MASK;
 | 
						|
		I915_WRITE(VLV_BLC_PWM_CTL(pipe), (0xf42 << 16) |
 | 
						|
			   cur_val);
 | 
						|
	}
 | 
						|
 | 
						|
	ctl2 = I915_READ(VLV_BLC_PWM_CTL2(PIPE_A));
 | 
						|
	panel->backlight.active_low_pwm = ctl2 & BLM_POLARITY_I965;
 | 
						|
 | 
						|
	ctl = I915_READ(VLV_BLC_PWM_CTL(PIPE_A));
 | 
						|
	panel->backlight.max = ctl >> 16;
 | 
						|
	if (!panel->backlight.max)
 | 
						|
		return -ENODEV;
 | 
						|
 | 
						|
	panel->backlight.min = get_backlight_min_vbt(connector);
 | 
						|
 | 
						|
	val = _vlv_get_backlight(dev, PIPE_A);
 | 
						|
	panel->backlight.level = intel_panel_compute_brightness(connector, val);
 | 
						|
 | 
						|
	panel->backlight.enabled = (ctl2 & BLM_PWM_ENABLE) &&
 | 
						|
		panel->backlight.level != 0;
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
int intel_panel_setup_backlight(struct drm_connector *connector)
 | 
						|
{
 | 
						|
	struct drm_device *dev = connector->dev;
 | 
						|
	struct drm_i915_private *dev_priv = dev->dev_private;
 | 
						|
	struct intel_connector *intel_connector = to_intel_connector(connector);
 | 
						|
	struct intel_panel *panel = &intel_connector->panel;
 | 
						|
	unsigned long flags;
 | 
						|
	int ret;
 | 
						|
 | 
						|
	if (!dev_priv->vbt.backlight.present) {
 | 
						|
		if (dev_priv->quirks & QUIRK_BACKLIGHT_PRESENT) {
 | 
						|
			DRM_DEBUG_KMS("no backlight present per VBT, but present per quirk\n");
 | 
						|
		} else {
 | 
						|
			DRM_DEBUG_KMS("no backlight present per VBT\n");
 | 
						|
			return 0;
 | 
						|
		}
 | 
						|
	}
 | 
						|
 | 
						|
	/* set level and max in panel struct */
 | 
						|
	spin_lock_irqsave(&dev_priv->backlight_lock, flags);
 | 
						|
	ret = dev_priv->display.setup_backlight(intel_connector);
 | 
						|
	spin_unlock_irqrestore(&dev_priv->backlight_lock, flags);
 | 
						|
 | 
						|
	if (ret) {
 | 
						|
		DRM_DEBUG_KMS("failed to setup backlight for connector %s\n",
 | 
						|
			      connector->name);
 | 
						|
		return ret;
 | 
						|
	}
 | 
						|
 | 
						|
	intel_backlight_device_register(intel_connector);
 | 
						|
 | 
						|
	panel->backlight.present = true;
 | 
						|
 | 
						|
	DRM_DEBUG_KMS("backlight initialized, %s, brightness %u/%u, "
 | 
						|
		      "sysfs interface %sregistered\n",
 | 
						|
		      panel->backlight.enabled ? "enabled" : "disabled",
 | 
						|
		      panel->backlight.level, panel->backlight.max,
 | 
						|
		      panel->backlight.device ? "" : "not ");
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
void intel_panel_destroy_backlight(struct drm_connector *connector)
 | 
						|
{
 | 
						|
	struct intel_connector *intel_connector = to_intel_connector(connector);
 | 
						|
	struct intel_panel *panel = &intel_connector->panel;
 | 
						|
 | 
						|
	panel->backlight.present = false;
 | 
						|
	intel_backlight_device_unregister(intel_connector);
 | 
						|
}
 | 
						|
 | 
						|
/* Set up chip specific backlight functions */
 | 
						|
void intel_panel_init_backlight_funcs(struct drm_device *dev)
 | 
						|
{
 | 
						|
	struct drm_i915_private *dev_priv = dev->dev_private;
 | 
						|
 | 
						|
	if (IS_BROADWELL(dev)) {
 | 
						|
		dev_priv->display.setup_backlight = bdw_setup_backlight;
 | 
						|
		dev_priv->display.enable_backlight = bdw_enable_backlight;
 | 
						|
		dev_priv->display.disable_backlight = pch_disable_backlight;
 | 
						|
		dev_priv->display.set_backlight = bdw_set_backlight;
 | 
						|
		dev_priv->display.get_backlight = bdw_get_backlight;
 | 
						|
	} else if (HAS_PCH_SPLIT(dev)) {
 | 
						|
		dev_priv->display.setup_backlight = pch_setup_backlight;
 | 
						|
		dev_priv->display.enable_backlight = pch_enable_backlight;
 | 
						|
		dev_priv->display.disable_backlight = pch_disable_backlight;
 | 
						|
		dev_priv->display.set_backlight = pch_set_backlight;
 | 
						|
		dev_priv->display.get_backlight = pch_get_backlight;
 | 
						|
	} else if (IS_VALLEYVIEW(dev)) {
 | 
						|
		dev_priv->display.setup_backlight = vlv_setup_backlight;
 | 
						|
		dev_priv->display.enable_backlight = vlv_enable_backlight;
 | 
						|
		dev_priv->display.disable_backlight = vlv_disable_backlight;
 | 
						|
		dev_priv->display.set_backlight = vlv_set_backlight;
 | 
						|
		dev_priv->display.get_backlight = vlv_get_backlight;
 | 
						|
	} else if (IS_GEN4(dev)) {
 | 
						|
		dev_priv->display.setup_backlight = i965_setup_backlight;
 | 
						|
		dev_priv->display.enable_backlight = i965_enable_backlight;
 | 
						|
		dev_priv->display.disable_backlight = i965_disable_backlight;
 | 
						|
		dev_priv->display.set_backlight = i9xx_set_backlight;
 | 
						|
		dev_priv->display.get_backlight = i9xx_get_backlight;
 | 
						|
	} else {
 | 
						|
		dev_priv->display.setup_backlight = i9xx_setup_backlight;
 | 
						|
		dev_priv->display.enable_backlight = i9xx_enable_backlight;
 | 
						|
		dev_priv->display.disable_backlight = i9xx_disable_backlight;
 | 
						|
		dev_priv->display.set_backlight = i9xx_set_backlight;
 | 
						|
		dev_priv->display.get_backlight = i9xx_get_backlight;
 | 
						|
	}
 | 
						|
}
 | 
						|
 | 
						|
int intel_panel_init(struct intel_panel *panel,
 | 
						|
		     struct drm_display_mode *fixed_mode,
 | 
						|
		     struct drm_display_mode *downclock_mode)
 | 
						|
{
 | 
						|
	panel->fixed_mode = fixed_mode;
 | 
						|
	panel->downclock_mode = downclock_mode;
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
void intel_panel_fini(struct intel_panel *panel)
 | 
						|
{
 | 
						|
	struct intel_connector *intel_connector =
 | 
						|
		container_of(panel, struct intel_connector, panel);
 | 
						|
 | 
						|
	if (panel->fixed_mode)
 | 
						|
		drm_mode_destroy(intel_connector->base.dev, panel->fixed_mode);
 | 
						|
 | 
						|
	if (panel->downclock_mode)
 | 
						|
		drm_mode_destroy(intel_connector->base.dev,
 | 
						|
				panel->downclock_mode);
 | 
						|
}
 |