40aad3c1a9
The device_type property is deprecated for the flattened device tree and the value "ethernet-phy" has never been defined as having a useful meaning. Neither the kernel nor u-boot depend on it. It should never have appeared in PHY bindings. This patch removes all references to "ethernet-phy" as a device_type value from the documentation and the .dts files. This patch was generated mechanically with the following command and then verified by looking at the diff. sed -i '/"ethernet-phy"/d' `git grep -l '"ethernet-phy"'` Signed-off-by: Grant Likely <grant.likely@linaro.org> Acked-by: Srinivas Kandagatla <srinivas.kandagatla@st.com> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
371 lines
8.8 KiB
Text
371 lines
8.8 KiB
Text
/*
|
|
* MPC832x RDB Device Tree Source
|
|
*
|
|
* Copyright 2007 Freescale Semiconductor Inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*/
|
|
|
|
/dts-v1/;
|
|
|
|
/ {
|
|
model = "MPC8323ERDB";
|
|
compatible = "MPC8323ERDB", "MPC832xRDB", "MPC83xxRDB";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
aliases {
|
|
ethernet0 = &enet1;
|
|
ethernet1 = &enet0;
|
|
serial0 = &serial0;
|
|
serial1 = &serial1;
|
|
pci0 = &pci0;
|
|
};
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
PowerPC,8323@0 {
|
|
device_type = "cpu";
|
|
reg = <0x0>;
|
|
d-cache-line-size = <0x20>; // 32 bytes
|
|
i-cache-line-size = <0x20>; // 32 bytes
|
|
d-cache-size = <16384>; // L1, 16K
|
|
i-cache-size = <16384>; // L1, 16K
|
|
timebase-frequency = <0>;
|
|
bus-frequency = <0>;
|
|
clock-frequency = <0>;
|
|
};
|
|
};
|
|
|
|
memory {
|
|
device_type = "memory";
|
|
reg = <0x00000000 0x04000000>;
|
|
};
|
|
|
|
soc8323@e0000000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
device_type = "soc";
|
|
compatible = "simple-bus";
|
|
ranges = <0x0 0xe0000000 0x00100000>;
|
|
reg = <0xe0000000 0x00000200>;
|
|
bus-frequency = <0>;
|
|
|
|
wdt@200 {
|
|
device_type = "watchdog";
|
|
compatible = "mpc83xx_wdt";
|
|
reg = <0x200 0x100>;
|
|
};
|
|
|
|
pmc: power@b00 {
|
|
compatible = "fsl,mpc8323-pmc", "fsl,mpc8349-pmc";
|
|
reg = <0xb00 0x100 0xa00 0x100>;
|
|
interrupts = <80 0x8>;
|
|
interrupt-parent = <&ipic>;
|
|
};
|
|
|
|
i2c@3000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
cell-index = <0>;
|
|
compatible = "fsl-i2c";
|
|
reg = <0x3000 0x100>;
|
|
interrupts = <14 0x8>;
|
|
interrupt-parent = <&ipic>;
|
|
dfsrr;
|
|
};
|
|
|
|
serial0: serial@4500 {
|
|
cell-index = <0>;
|
|
device_type = "serial";
|
|
compatible = "fsl,ns16550", "ns16550";
|
|
reg = <0x4500 0x100>;
|
|
clock-frequency = <0>;
|
|
interrupts = <9 0x8>;
|
|
interrupt-parent = <&ipic>;
|
|
};
|
|
|
|
serial1: serial@4600 {
|
|
cell-index = <1>;
|
|
device_type = "serial";
|
|
compatible = "fsl,ns16550", "ns16550";
|
|
reg = <0x4600 0x100>;
|
|
clock-frequency = <0>;
|
|
interrupts = <10 0x8>;
|
|
interrupt-parent = <&ipic>;
|
|
};
|
|
|
|
dma@82a8 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "fsl,mpc8323-dma", "fsl,elo-dma";
|
|
reg = <0x82a8 4>;
|
|
ranges = <0 0x8100 0x1a8>;
|
|
interrupt-parent = <&ipic>;
|
|
interrupts = <71 8>;
|
|
cell-index = <0>;
|
|
dma-channel@0 {
|
|
compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
|
|
reg = <0 0x80>;
|
|
cell-index = <0>;
|
|
interrupt-parent = <&ipic>;
|
|
interrupts = <71 8>;
|
|
};
|
|
dma-channel@80 {
|
|
compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
|
|
reg = <0x80 0x80>;
|
|
cell-index = <1>;
|
|
interrupt-parent = <&ipic>;
|
|
interrupts = <71 8>;
|
|
};
|
|
dma-channel@100 {
|
|
compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
|
|
reg = <0x100 0x80>;
|
|
cell-index = <2>;
|
|
interrupt-parent = <&ipic>;
|
|
interrupts = <71 8>;
|
|
};
|
|
dma-channel@180 {
|
|
compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
|
|
reg = <0x180 0x28>;
|
|
cell-index = <3>;
|
|
interrupt-parent = <&ipic>;
|
|
interrupts = <71 8>;
|
|
};
|
|
};
|
|
|
|
crypto@30000 {
|
|
compatible = "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0";
|
|
reg = <0x30000 0x10000>;
|
|
interrupts = <11 0x8>;
|
|
interrupt-parent = <&ipic>;
|
|
fsl,num-channels = <1>;
|
|
fsl,channel-fifo-len = <24>;
|
|
fsl,exec-units-mask = <0x4c>;
|
|
fsl,descriptor-types-mask = <0x0122003f>;
|
|
sleep = <&pmc 0x03000000>;
|
|
};
|
|
|
|
ipic:pic@700 {
|
|
interrupt-controller;
|
|
#address-cells = <0>;
|
|
#interrupt-cells = <2>;
|
|
reg = <0x700 0x100>;
|
|
device_type = "ipic";
|
|
};
|
|
|
|
par_io@1400 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
reg = <0x1400 0x100>;
|
|
ranges = <3 0x1448 0x18>;
|
|
compatible = "fsl,mpc8323-qe-pario";
|
|
device_type = "par_io";
|
|
num-ports = <7>;
|
|
|
|
qe_pio_d: gpio-controller@1448 {
|
|
#gpio-cells = <2>;
|
|
compatible = "fsl,mpc8323-qe-pario-bank";
|
|
reg = <3 0x18>;
|
|
gpio-controller;
|
|
};
|
|
|
|
ucc2pio:ucc_pin@02 {
|
|
pio-map = <
|
|
/* port pin dir open_drain assignment has_irq */
|
|
3 4 3 0 2 0 /* MDIO */
|
|
3 5 1 0 2 0 /* MDC */
|
|
3 21 2 0 1 0 /* RX_CLK (CLK16) */
|
|
3 23 2 0 1 0 /* TX_CLK (CLK3) */
|
|
0 18 1 0 1 0 /* TxD0 */
|
|
0 19 1 0 1 0 /* TxD1 */
|
|
0 20 1 0 1 0 /* TxD2 */
|
|
0 21 1 0 1 0 /* TxD3 */
|
|
0 22 2 0 1 0 /* RxD0 */
|
|
0 23 2 0 1 0 /* RxD1 */
|
|
0 24 2 0 1 0 /* RxD2 */
|
|
0 25 2 0 1 0 /* RxD3 */
|
|
0 26 2 0 1 0 /* RX_ER */
|
|
0 27 1 0 1 0 /* TX_ER */
|
|
0 28 2 0 1 0 /* RX_DV */
|
|
0 29 2 0 1 0 /* COL */
|
|
0 30 1 0 1 0 /* TX_EN */
|
|
0 31 2 0 1 0>; /* CRS */
|
|
};
|
|
ucc3pio:ucc_pin@03 {
|
|
pio-map = <
|
|
/* port pin dir open_drain assignment has_irq */
|
|
0 13 2 0 1 0 /* RX_CLK (CLK9) */
|
|
3 24 2 0 1 0 /* TX_CLK (CLK10) */
|
|
1 0 1 0 1 0 /* TxD0 */
|
|
1 1 1 0 1 0 /* TxD1 */
|
|
1 2 1 0 1 0 /* TxD2 */
|
|
1 3 1 0 1 0 /* TxD3 */
|
|
1 4 2 0 1 0 /* RxD0 */
|
|
1 5 2 0 1 0 /* RxD1 */
|
|
1 6 2 0 1 0 /* RxD2 */
|
|
1 7 2 0 1 0 /* RxD3 */
|
|
1 8 2 0 1 0 /* RX_ER */
|
|
1 9 1 0 1 0 /* TX_ER */
|
|
1 10 2 0 1 0 /* RX_DV */
|
|
1 11 2 0 1 0 /* COL */
|
|
1 12 1 0 1 0 /* TX_EN */
|
|
1 13 2 0 1 0>; /* CRS */
|
|
};
|
|
};
|
|
};
|
|
|
|
qe@e0100000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
device_type = "qe";
|
|
compatible = "fsl,qe";
|
|
ranges = <0x0 0xe0100000 0x00100000>;
|
|
reg = <0xe0100000 0x480>;
|
|
brg-frequency = <0>;
|
|
bus-frequency = <198000000>;
|
|
fsl,qe-num-riscs = <1>;
|
|
fsl,qe-num-snums = <28>;
|
|
|
|
muram@10000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "fsl,qe-muram", "fsl,cpm-muram";
|
|
ranges = <0x0 0x00010000 0x00004000>;
|
|
|
|
data-only@0 {
|
|
compatible = "fsl,qe-muram-data",
|
|
"fsl,cpm-muram-data";
|
|
reg = <0x0 0x4000>;
|
|
};
|
|
};
|
|
|
|
spi@4c0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
cell-index = <0>;
|
|
compatible = "fsl,spi";
|
|
reg = <0x4c0 0x40>;
|
|
interrupts = <2>;
|
|
interrupt-parent = <&qeic>;
|
|
gpios = <&qe_pio_d 13 0>;
|
|
mode = "cpu-qe";
|
|
|
|
mmc-slot@0 {
|
|
compatible = "fsl,mpc8323rdb-mmc-slot",
|
|
"mmc-spi-slot";
|
|
reg = <0>;
|
|
gpios = <&qe_pio_d 14 1
|
|
&qe_pio_d 15 0>;
|
|
voltage-ranges = <3300 3300>;
|
|
spi-max-frequency = <50000000>;
|
|
};
|
|
};
|
|
|
|
spi@500 {
|
|
cell-index = <1>;
|
|
compatible = "fsl,spi";
|
|
reg = <0x500 0x40>;
|
|
interrupts = <1>;
|
|
interrupt-parent = <&qeic>;
|
|
mode = "cpu";
|
|
};
|
|
|
|
enet0: ucc@3000 {
|
|
device_type = "network";
|
|
compatible = "ucc_geth";
|
|
cell-index = <2>;
|
|
reg = <0x3000 0x200>;
|
|
interrupts = <33>;
|
|
interrupt-parent = <&qeic>;
|
|
local-mac-address = [ 00 00 00 00 00 00 ];
|
|
rx-clock-name = "clk16";
|
|
tx-clock-name = "clk3";
|
|
phy-handle = <&phy00>;
|
|
pio-handle = <&ucc2pio>;
|
|
};
|
|
|
|
enet1: ucc@2200 {
|
|
device_type = "network";
|
|
compatible = "ucc_geth";
|
|
cell-index = <3>;
|
|
reg = <0x2200 0x200>;
|
|
interrupts = <34>;
|
|
interrupt-parent = <&qeic>;
|
|
local-mac-address = [ 00 00 00 00 00 00 ];
|
|
rx-clock-name = "clk9";
|
|
tx-clock-name = "clk10";
|
|
phy-handle = <&phy04>;
|
|
pio-handle = <&ucc3pio>;
|
|
};
|
|
|
|
mdio@3120 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x3120 0x18>;
|
|
compatible = "fsl,ucc-mdio";
|
|
|
|
phy00:ethernet-phy@00 {
|
|
interrupt-parent = <&ipic>;
|
|
interrupts = <0>;
|
|
reg = <0x0>;
|
|
};
|
|
phy04:ethernet-phy@04 {
|
|
interrupt-parent = <&ipic>;
|
|
interrupts = <0>;
|
|
reg = <0x4>;
|
|
};
|
|
};
|
|
|
|
qeic:interrupt-controller@80 {
|
|
interrupt-controller;
|
|
compatible = "fsl,qe-ic";
|
|
#address-cells = <0>;
|
|
#interrupt-cells = <1>;
|
|
reg = <0x80 0x80>;
|
|
big-endian;
|
|
interrupts = <32 0x8 33 0x8>; //high:32 low:33
|
|
interrupt-parent = <&ipic>;
|
|
};
|
|
};
|
|
|
|
pci0: pci@e0008500 {
|
|
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
|
|
interrupt-map = <
|
|
/* IDSEL 0x10 AD16 (USB) */
|
|
0x8000 0x0 0x0 0x1 &ipic 17 0x8
|
|
|
|
/* IDSEL 0x11 AD17 (Mini1)*/
|
|
0x8800 0x0 0x0 0x1 &ipic 18 0x8
|
|
0x8800 0x0 0x0 0x2 &ipic 19 0x8
|
|
0x8800 0x0 0x0 0x3 &ipic 20 0x8
|
|
0x8800 0x0 0x0 0x4 &ipic 48 0x8
|
|
|
|
/* IDSEL 0x12 AD18 (PCI/Mini2) */
|
|
0x9000 0x0 0x0 0x1 &ipic 19 0x8
|
|
0x9000 0x0 0x0 0x2 &ipic 20 0x8
|
|
0x9000 0x0 0x0 0x3 &ipic 48 0x8
|
|
0x9000 0x0 0x0 0x4 &ipic 17 0x8>;
|
|
|
|
interrupt-parent = <&ipic>;
|
|
interrupts = <66 0x8>;
|
|
bus-range = <0x0 0x0>;
|
|
ranges = <0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
|
|
0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
|
|
0x01000000 0x0 0xd0000000 0xd0000000 0x0 0x04000000>;
|
|
clock-frequency = <0>;
|
|
#interrupt-cells = <1>;
|
|
#size-cells = <2>;
|
|
#address-cells = <3>;
|
|
reg = <0xe0008500 0x100 /* internal registers */
|
|
0xe0008300 0x8>; /* config space access registers */
|
|
compatible = "fsl,mpc8349-pci";
|
|
device_type = "pci";
|
|
sleep = <&pmc 0x00010000>;
|
|
};
|
|
};
|