1da177e4c3
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
92 lines
3 KiB
Text
92 lines
3 KiB
Text
|
|
Intro
|
|
=====
|
|
|
|
people start bugging me about this with questions, looks like I
|
|
should write up some documentation for this beast. That way I
|
|
don't have to answer that much mails I hope. Yes, I'm lazy...
|
|
|
|
|
|
You might have noticed that the bt878 grabber cards have actually
|
|
_two_ PCI functions:
|
|
|
|
$ lspci
|
|
[ ... ]
|
|
00:0a.0 Multimedia video controller: Brooktree Corporation Bt878 (rev 02)
|
|
00:0a.1 Multimedia controller: Brooktree Corporation Bt878 (rev 02)
|
|
[ ... ]
|
|
|
|
The first does video, it is backward compatible to the bt848. The second
|
|
does audio. btaudio is a driver for the second function. It's a sound
|
|
driver which can be used for recording sound (and _only_ recording, no
|
|
playback). As most TV cards come with a short cable which can be plugged
|
|
into your sound card's line-in you probably don't need this driver if all
|
|
you want to do is just watching TV...
|
|
|
|
|
|
Driver Status
|
|
=============
|
|
|
|
Still somewhat experimental. The driver should work stable, i.e. it
|
|
should'nt crash your box. It might not work as expected, have bugs,
|
|
not being fully OSS API compilant, ...
|
|
|
|
Latest versions are available from http://bytesex.org/bttv/, the
|
|
driver is in the bttv tarball. Kernel patches might be available too,
|
|
have a look at http://bytesex.org/bttv/listing.html.
|
|
|
|
The chip knows two different modes. btaudio registers two dsp
|
|
devices, one for each mode. They can not be used at the same time.
|
|
|
|
|
|
Digital audio mode
|
|
==================
|
|
|
|
The chip gives you 16 bit stereo sound. The sample rate depends on
|
|
the external source which feeds the bt878 with digital sound via I2S
|
|
interface. There is a insmod option (rate) to tell the driver which
|
|
sample rate the hardware uses (32000 is the default).
|
|
|
|
One possible source for digital sound is the msp34xx audio processor
|
|
chip which provides digital sound via I2S with 32 kHz sample rate. My
|
|
Hauppauge board works this way.
|
|
|
|
The Osprey-200 reportly gives you digital sound with 44100 Hz sample
|
|
rate. It is also possible that you get no sound at all.
|
|
|
|
|
|
analog mode (A/D)
|
|
=================
|
|
|
|
You can tell the driver to use this mode with the insmod option "analog=1".
|
|
The chip has three analog inputs. Consequently you'll get a mixer device
|
|
to control these.
|
|
|
|
The analog mode supports mono only. Both 8 + 16 bit. Both are _signed_
|
|
int, which is uncommon for the 8 bit case. Sample rate range is 119 kHz
|
|
to 448 kHz. Yes, the number of digits is correct. The driver supports
|
|
downsampling by powers of two, so you can ask for more usual sample rates
|
|
like 44 kHz too.
|
|
|
|
With my Hauppauge I get noisy sound on the second input (mapped to line2
|
|
by the mixer device). Others get a useable signal on line1.
|
|
|
|
|
|
some examples
|
|
=============
|
|
|
|
* read audio data from btaudio (dsp2), send to es1730 (dsp,dsp1):
|
|
$ sox -w -r 32000 -t ossdsp /dev/dsp2 -t ossdsp /dev/dsp
|
|
|
|
* read audio data from btaudio, send to esound daemon (which might be
|
|
running on another host):
|
|
$ sox -c 2 -w -r 32000 -t ossdsp /dev/dsp2 -t sw - | esdcat -r 32000
|
|
$ sox -c 1 -w -r 32000 -t ossdsp /dev/dsp2 -t sw - | esdcat -m -r 32000
|
|
|
|
|
|
Have fun,
|
|
|
|
Gerd
|
|
|
|
--
|
|
Gerd Knorr <kraxel@bytesex.org>
|