 3b2b36e5f0
			
		
	
	
	3b2b36e5f0
	
	
	
		
			
			The ADV7511 supports interlaced modes fine, there's no need to reject them. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
		
			
				
	
	
		
			1007 lines
		
	
	
	
		
			27 KiB
			
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			1007 lines
		
	
	
	
		
			27 KiB
			
		
	
	
	
		
			C
		
	
	
	
	
	
| /*
 | |
|  * Analog Devices ADV7511 HDMI transmitter driver
 | |
|  *
 | |
|  * Copyright 2012 Analog Devices Inc.
 | |
|  *
 | |
|  * Licensed under the GPL-2.
 | |
|  */
 | |
| 
 | |
| #include <linux/device.h>
 | |
| #include <linux/gpio/consumer.h>
 | |
| #include <linux/i2c.h>
 | |
| #include <linux/module.h>
 | |
| #include <linux/regmap.h>
 | |
| #include <linux/slab.h>
 | |
| 
 | |
| #include <drm/drmP.h>
 | |
| #include <drm/drm_crtc_helper.h>
 | |
| #include <drm/drm_edid.h>
 | |
| #include <drm/drm_encoder_slave.h>
 | |
| 
 | |
| #include "adv7511.h"
 | |
| 
 | |
| struct adv7511 {
 | |
| 	struct i2c_client *i2c_main;
 | |
| 	struct i2c_client *i2c_edid;
 | |
| 
 | |
| 	struct regmap *regmap;
 | |
| 	struct regmap *packet_memory_regmap;
 | |
| 	enum drm_connector_status status;
 | |
| 	int dpms_mode;
 | |
| 
 | |
| 	unsigned int f_tmds;
 | |
| 
 | |
| 	unsigned int current_edid_segment;
 | |
| 	uint8_t edid_buf[256];
 | |
| 
 | |
| 	wait_queue_head_t wq;
 | |
| 	struct drm_encoder *encoder;
 | |
| 
 | |
| 	bool embedded_sync;
 | |
| 	enum adv7511_sync_polarity vsync_polarity;
 | |
| 	enum adv7511_sync_polarity hsync_polarity;
 | |
| 	bool rgb;
 | |
| 
 | |
| 	struct edid *edid;
 | |
| 
 | |
| 	struct gpio_desc *gpio_pd;
 | |
| };
 | |
| 
 | |
| static struct adv7511 *encoder_to_adv7511(struct drm_encoder *encoder)
 | |
| {
 | |
| 	return to_encoder_slave(encoder)->slave_priv;
 | |
| }
 | |
| 
 | |
| /* ADI recommended values for proper operation. */
 | |
| static const struct reg_default adv7511_fixed_registers[] = {
 | |
| 	{ 0x98, 0x03 },
 | |
| 	{ 0x9a, 0xe0 },
 | |
| 	{ 0x9c, 0x30 },
 | |
| 	{ 0x9d, 0x61 },
 | |
| 	{ 0xa2, 0xa4 },
 | |
| 	{ 0xa3, 0xa4 },
 | |
| 	{ 0xe0, 0xd0 },
 | |
| 	{ 0xf9, 0x00 },
 | |
| 	{ 0x55, 0x02 },
 | |
| };
 | |
| 
 | |
| /* -----------------------------------------------------------------------------
 | |
|  * Register access
 | |
|  */
 | |
| 
 | |
| static const uint8_t adv7511_register_defaults[] = {
 | |
| 	0x12, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 00 */
 | |
| 	0x00, 0x00, 0x01, 0x0e, 0xbc, 0x18, 0x01, 0x13,
 | |
| 	0x25, 0x37, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 10 */
 | |
| 	0x46, 0x62, 0x04, 0xa8, 0x00, 0x00, 0x1c, 0x84,
 | |
| 	0x1c, 0xbf, 0x04, 0xa8, 0x1e, 0x70, 0x02, 0x1e, /* 20 */
 | |
| 	0x00, 0x00, 0x04, 0xa8, 0x08, 0x12, 0x1b, 0xac,
 | |
| 	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 30 */
 | |
| 	0x00, 0x00, 0x00, 0x80, 0x00, 0x00, 0x00, 0xb0,
 | |
| 	0x00, 0x50, 0x90, 0x7e, 0x79, 0x70, 0x00, 0x00, /* 40 */
 | |
| 	0x00, 0xa8, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00,
 | |
| 	0x00, 0x00, 0x02, 0x0d, 0x00, 0x00, 0x00, 0x00, /* 50 */
 | |
| 	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 | |
| 	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 60 */
 | |
| 	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 | |
| 	0x01, 0x0a, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 70 */
 | |
| 	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 | |
| 	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 80 */
 | |
| 	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 | |
| 	0x00, 0x00, 0x00, 0x00, 0xc0, 0x00, 0x00, 0x00, /* 90 */
 | |
| 	0x0b, 0x02, 0x00, 0x18, 0x5a, 0x60, 0x00, 0x00,
 | |
| 	0x00, 0x00, 0x80, 0x80, 0x08, 0x04, 0x00, 0x00, /* a0 */
 | |
| 	0x00, 0x00, 0x00, 0x40, 0x00, 0x00, 0x40, 0x14,
 | |
| 	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* b0 */
 | |
| 	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 | |
| 	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* c0 */
 | |
| 	0x00, 0x03, 0x00, 0x00, 0x02, 0x00, 0x01, 0x04,
 | |
| 	0x30, 0xff, 0x80, 0x80, 0x80, 0x00, 0x00, 0x00, /* d0 */
 | |
| 	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x01,
 | |
| 	0x80, 0x75, 0x00, 0x00, 0x60, 0x00, 0x00, 0x00, /* e0 */
 | |
| 	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 | |
| 	0x00, 0x00, 0x00, 0x00, 0x00, 0x75, 0x11, 0x00, /* f0 */
 | |
| 	0x00, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 | |
| };
 | |
| 
 | |
| static bool adv7511_register_volatile(struct device *dev, unsigned int reg)
 | |
| {
 | |
| 	switch (reg) {
 | |
| 	case ADV7511_REG_CHIP_REVISION:
 | |
| 	case ADV7511_REG_SPDIF_FREQ:
 | |
| 	case ADV7511_REG_CTS_AUTOMATIC1:
 | |
| 	case ADV7511_REG_CTS_AUTOMATIC2:
 | |
| 	case ADV7511_REG_VIC_DETECTED:
 | |
| 	case ADV7511_REG_VIC_SEND:
 | |
| 	case ADV7511_REG_AUX_VIC_DETECTED:
 | |
| 	case ADV7511_REG_STATUS:
 | |
| 	case ADV7511_REG_GC(1):
 | |
| 	case ADV7511_REG_INT(0):
 | |
| 	case ADV7511_REG_INT(1):
 | |
| 	case ADV7511_REG_PLL_STATUS:
 | |
| 	case ADV7511_REG_AN(0):
 | |
| 	case ADV7511_REG_AN(1):
 | |
| 	case ADV7511_REG_AN(2):
 | |
| 	case ADV7511_REG_AN(3):
 | |
| 	case ADV7511_REG_AN(4):
 | |
| 	case ADV7511_REG_AN(5):
 | |
| 	case ADV7511_REG_AN(6):
 | |
| 	case ADV7511_REG_AN(7):
 | |
| 	case ADV7511_REG_HDCP_STATUS:
 | |
| 	case ADV7511_REG_BCAPS:
 | |
| 	case ADV7511_REG_BKSV(0):
 | |
| 	case ADV7511_REG_BKSV(1):
 | |
| 	case ADV7511_REG_BKSV(2):
 | |
| 	case ADV7511_REG_BKSV(3):
 | |
| 	case ADV7511_REG_BKSV(4):
 | |
| 	case ADV7511_REG_DDC_STATUS:
 | |
| 	case ADV7511_REG_BSTATUS(0):
 | |
| 	case ADV7511_REG_BSTATUS(1):
 | |
| 	case ADV7511_REG_CHIP_ID_HIGH:
 | |
| 	case ADV7511_REG_CHIP_ID_LOW:
 | |
| 		return true;
 | |
| 	}
 | |
| 
 | |
| 	return false;
 | |
| }
 | |
| 
 | |
| static const struct regmap_config adv7511_regmap_config = {
 | |
| 	.reg_bits = 8,
 | |
| 	.val_bits = 8,
 | |
| 
 | |
| 	.max_register = 0xff,
 | |
| 	.cache_type = REGCACHE_RBTREE,
 | |
| 	.reg_defaults_raw = adv7511_register_defaults,
 | |
| 	.num_reg_defaults_raw = ARRAY_SIZE(adv7511_register_defaults),
 | |
| 
 | |
| 	.volatile_reg = adv7511_register_volatile,
 | |
| };
 | |
| 
 | |
| /* -----------------------------------------------------------------------------
 | |
|  * Hardware configuration
 | |
|  */
 | |
| 
 | |
| static void adv7511_set_colormap(struct adv7511 *adv7511, bool enable,
 | |
| 				 const uint16_t *coeff,
 | |
| 				 unsigned int scaling_factor)
 | |
| {
 | |
| 	unsigned int i;
 | |
| 
 | |
| 	regmap_update_bits(adv7511->regmap, ADV7511_REG_CSC_UPPER(1),
 | |
| 			   ADV7511_CSC_UPDATE_MODE, ADV7511_CSC_UPDATE_MODE);
 | |
| 
 | |
| 	if (enable) {
 | |
| 		for (i = 0; i < 12; ++i) {
 | |
| 			regmap_update_bits(adv7511->regmap,
 | |
| 					   ADV7511_REG_CSC_UPPER(i),
 | |
| 					   0x1f, coeff[i] >> 8);
 | |
| 			regmap_write(adv7511->regmap,
 | |
| 				     ADV7511_REG_CSC_LOWER(i),
 | |
| 				     coeff[i] & 0xff);
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	if (enable)
 | |
| 		regmap_update_bits(adv7511->regmap, ADV7511_REG_CSC_UPPER(0),
 | |
| 				   0xe0, 0x80 | (scaling_factor << 5));
 | |
| 	else
 | |
| 		regmap_update_bits(adv7511->regmap, ADV7511_REG_CSC_UPPER(0),
 | |
| 				   0x80, 0x00);
 | |
| 
 | |
| 	regmap_update_bits(adv7511->regmap, ADV7511_REG_CSC_UPPER(1),
 | |
| 			   ADV7511_CSC_UPDATE_MODE, 0);
 | |
| }
 | |
| 
 | |
| static int adv7511_packet_enable(struct adv7511 *adv7511, unsigned int packet)
 | |
| {
 | |
| 	if (packet & 0xff)
 | |
| 		regmap_update_bits(adv7511->regmap, ADV7511_REG_PACKET_ENABLE0,
 | |
| 				   packet, 0xff);
 | |
| 
 | |
| 	if (packet & 0xff00) {
 | |
| 		packet >>= 8;
 | |
| 		regmap_update_bits(adv7511->regmap, ADV7511_REG_PACKET_ENABLE1,
 | |
| 				   packet, 0xff);
 | |
| 	}
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int adv7511_packet_disable(struct adv7511 *adv7511, unsigned int packet)
 | |
| {
 | |
| 	if (packet & 0xff)
 | |
| 		regmap_update_bits(adv7511->regmap, ADV7511_REG_PACKET_ENABLE0,
 | |
| 				   packet, 0x00);
 | |
| 
 | |
| 	if (packet & 0xff00) {
 | |
| 		packet >>= 8;
 | |
| 		regmap_update_bits(adv7511->regmap, ADV7511_REG_PACKET_ENABLE1,
 | |
| 				   packet, 0x00);
 | |
| 	}
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| /* Coefficients for adv7511 color space conversion */
 | |
| static const uint16_t adv7511_csc_ycbcr_to_rgb[] = {
 | |
| 	0x0734, 0x04ad, 0x0000, 0x1c1b,
 | |
| 	0x1ddc, 0x04ad, 0x1f24, 0x0135,
 | |
| 	0x0000, 0x04ad, 0x087c, 0x1b77,
 | |
| };
 | |
| 
 | |
| static void adv7511_set_config_csc(struct adv7511 *adv7511,
 | |
| 				   struct drm_connector *connector,
 | |
| 				   bool rgb)
 | |
| {
 | |
| 	struct adv7511_video_config config;
 | |
| 	bool output_format_422, output_format_ycbcr;
 | |
| 	unsigned int mode;
 | |
| 	uint8_t infoframe[17];
 | |
| 
 | |
| 	if (adv7511->edid)
 | |
| 		config.hdmi_mode = drm_detect_hdmi_monitor(adv7511->edid);
 | |
| 	else
 | |
| 		config.hdmi_mode = false;
 | |
| 
 | |
| 	hdmi_avi_infoframe_init(&config.avi_infoframe);
 | |
| 
 | |
| 	config.avi_infoframe.scan_mode = HDMI_SCAN_MODE_UNDERSCAN;
 | |
| 
 | |
| 	if (rgb) {
 | |
| 		config.csc_enable = false;
 | |
| 		config.avi_infoframe.colorspace = HDMI_COLORSPACE_RGB;
 | |
| 	} else {
 | |
| 		config.csc_scaling_factor = ADV7511_CSC_SCALING_4;
 | |
| 		config.csc_coefficents = adv7511_csc_ycbcr_to_rgb;
 | |
| 
 | |
| 		if ((connector->display_info.color_formats &
 | |
| 		     DRM_COLOR_FORMAT_YCRCB422) &&
 | |
| 		    config.hdmi_mode) {
 | |
| 			config.csc_enable = false;
 | |
| 			config.avi_infoframe.colorspace =
 | |
| 				HDMI_COLORSPACE_YUV422;
 | |
| 		} else {
 | |
| 			config.csc_enable = true;
 | |
| 			config.avi_infoframe.colorspace = HDMI_COLORSPACE_RGB;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	if (config.hdmi_mode) {
 | |
| 		mode = ADV7511_HDMI_CFG_MODE_HDMI;
 | |
| 
 | |
| 		switch (config.avi_infoframe.colorspace) {
 | |
| 		case HDMI_COLORSPACE_YUV444:
 | |
| 			output_format_422 = false;
 | |
| 			output_format_ycbcr = true;
 | |
| 			break;
 | |
| 		case HDMI_COLORSPACE_YUV422:
 | |
| 			output_format_422 = true;
 | |
| 			output_format_ycbcr = true;
 | |
| 			break;
 | |
| 		default:
 | |
| 			output_format_422 = false;
 | |
| 			output_format_ycbcr = false;
 | |
| 			break;
 | |
| 		}
 | |
| 	} else {
 | |
| 		mode = ADV7511_HDMI_CFG_MODE_DVI;
 | |
| 		output_format_422 = false;
 | |
| 		output_format_ycbcr = false;
 | |
| 	}
 | |
| 
 | |
| 	adv7511_packet_disable(adv7511, ADV7511_PACKET_ENABLE_AVI_INFOFRAME);
 | |
| 
 | |
| 	adv7511_set_colormap(adv7511, config.csc_enable,
 | |
| 			     config.csc_coefficents,
 | |
| 			     config.csc_scaling_factor);
 | |
| 
 | |
| 	regmap_update_bits(adv7511->regmap, ADV7511_REG_VIDEO_INPUT_CFG1, 0x81,
 | |
| 			   (output_format_422 << 7) | output_format_ycbcr);
 | |
| 
 | |
| 	regmap_update_bits(adv7511->regmap, ADV7511_REG_HDCP_HDMI_CFG,
 | |
| 			   ADV7511_HDMI_CFG_MODE_MASK, mode);
 | |
| 
 | |
| 	hdmi_avi_infoframe_pack(&config.avi_infoframe, infoframe,
 | |
| 				sizeof(infoframe));
 | |
| 
 | |
| 	/* The AVI infoframe id is not configurable */
 | |
| 	regmap_bulk_write(adv7511->regmap, ADV7511_REG_AVI_INFOFRAME_VERSION,
 | |
| 			  infoframe + 1, sizeof(infoframe) - 1);
 | |
| 
 | |
| 	adv7511_packet_enable(adv7511, ADV7511_PACKET_ENABLE_AVI_INFOFRAME);
 | |
| }
 | |
| 
 | |
| static void adv7511_set_link_config(struct adv7511 *adv7511,
 | |
| 				    const struct adv7511_link_config *config)
 | |
| {
 | |
| 	/*
 | |
| 	 * The input style values documented in the datasheet don't match the
 | |
| 	 * hardware register field values :-(
 | |
| 	 */
 | |
| 	static const unsigned int input_styles[4] = { 0, 2, 1, 3 };
 | |
| 
 | |
| 	unsigned int clock_delay;
 | |
| 	unsigned int color_depth;
 | |
| 	unsigned int input_id;
 | |
| 
 | |
| 	clock_delay = (config->clock_delay + 1200) / 400;
 | |
| 	color_depth = config->input_color_depth == 8 ? 3
 | |
| 		    : (config->input_color_depth == 10 ? 1 : 2);
 | |
| 
 | |
| 	/* TODO Support input ID 6 */
 | |
| 	if (config->input_colorspace != HDMI_COLORSPACE_YUV422)
 | |
| 		input_id = config->input_clock == ADV7511_INPUT_CLOCK_DDR
 | |
| 			 ? 5 : 0;
 | |
| 	else if (config->input_clock == ADV7511_INPUT_CLOCK_DDR)
 | |
| 		input_id = config->embedded_sync ? 8 : 7;
 | |
| 	else if (config->input_clock == ADV7511_INPUT_CLOCK_2X)
 | |
| 		input_id = config->embedded_sync ? 4 : 3;
 | |
| 	else
 | |
| 		input_id = config->embedded_sync ? 2 : 1;
 | |
| 
 | |
| 	regmap_update_bits(adv7511->regmap, ADV7511_REG_I2C_FREQ_ID_CFG, 0xf,
 | |
| 			   input_id);
 | |
| 	regmap_update_bits(adv7511->regmap, ADV7511_REG_VIDEO_INPUT_CFG1, 0x7e,
 | |
| 			   (color_depth << 4) |
 | |
| 			   (input_styles[config->input_style] << 2));
 | |
| 	regmap_write(adv7511->regmap, ADV7511_REG_VIDEO_INPUT_CFG2,
 | |
| 		     config->input_justification << 3);
 | |
| 	regmap_write(adv7511->regmap, ADV7511_REG_TIMING_GEN_SEQ,
 | |
| 		     config->sync_pulse << 2);
 | |
| 
 | |
| 	regmap_write(adv7511->regmap, 0xba, clock_delay << 5);
 | |
| 
 | |
| 	adv7511->embedded_sync = config->embedded_sync;
 | |
| 	adv7511->hsync_polarity = config->hsync_polarity;
 | |
| 	adv7511->vsync_polarity = config->vsync_polarity;
 | |
| 	adv7511->rgb = config->input_colorspace == HDMI_COLORSPACE_RGB;
 | |
| }
 | |
| 
 | |
| /* -----------------------------------------------------------------------------
 | |
|  * Interrupt and hotplug detection
 | |
|  */
 | |
| 
 | |
| static bool adv7511_hpd(struct adv7511 *adv7511)
 | |
| {
 | |
| 	unsigned int irq0;
 | |
| 	int ret;
 | |
| 
 | |
| 	ret = regmap_read(adv7511->regmap, ADV7511_REG_INT(0), &irq0);
 | |
| 	if (ret < 0)
 | |
| 		return false;
 | |
| 
 | |
| 	if (irq0 & ADV7511_INT0_HDP) {
 | |
| 		regmap_write(adv7511->regmap, ADV7511_REG_INT(0),
 | |
| 			     ADV7511_INT0_HDP);
 | |
| 		return true;
 | |
| 	}
 | |
| 
 | |
| 	return false;
 | |
| }
 | |
| 
 | |
| static irqreturn_t adv7511_irq_handler(int irq, void *devid)
 | |
| {
 | |
| 	struct adv7511 *adv7511 = devid;
 | |
| 
 | |
| 	if (adv7511_hpd(adv7511))
 | |
| 		drm_helper_hpd_irq_event(adv7511->encoder->dev);
 | |
| 
 | |
| 	wake_up_all(&adv7511->wq);
 | |
| 
 | |
| 	return IRQ_HANDLED;
 | |
| }
 | |
| 
 | |
| static unsigned int adv7511_is_interrupt_pending(struct adv7511 *adv7511,
 | |
| 						 unsigned int irq)
 | |
| {
 | |
| 	unsigned int irq0, irq1;
 | |
| 	unsigned int pending;
 | |
| 	int ret;
 | |
| 
 | |
| 	ret = regmap_read(adv7511->regmap, ADV7511_REG_INT(0), &irq0);
 | |
| 	if (ret < 0)
 | |
| 		return 0;
 | |
| 	ret = regmap_read(adv7511->regmap, ADV7511_REG_INT(1), &irq1);
 | |
| 	if (ret < 0)
 | |
| 		return 0;
 | |
| 
 | |
| 	pending = (irq1 << 8) | irq0;
 | |
| 
 | |
| 	return pending & irq;
 | |
| }
 | |
| 
 | |
| static int adv7511_wait_for_interrupt(struct adv7511 *adv7511, int irq,
 | |
| 				      int timeout)
 | |
| {
 | |
| 	unsigned int pending;
 | |
| 	int ret;
 | |
| 
 | |
| 	if (adv7511->i2c_main->irq) {
 | |
| 		ret = wait_event_interruptible_timeout(adv7511->wq,
 | |
| 				adv7511_is_interrupt_pending(adv7511, irq),
 | |
| 				msecs_to_jiffies(timeout));
 | |
| 		if (ret <= 0)
 | |
| 			return 0;
 | |
| 		pending = adv7511_is_interrupt_pending(adv7511, irq);
 | |
| 	} else {
 | |
| 		if (timeout < 25)
 | |
| 			timeout = 25;
 | |
| 		do {
 | |
| 			pending = adv7511_is_interrupt_pending(adv7511, irq);
 | |
| 			if (pending)
 | |
| 				break;
 | |
| 			msleep(25);
 | |
| 			timeout -= 25;
 | |
| 		} while (timeout >= 25);
 | |
| 	}
 | |
| 
 | |
| 	return pending;
 | |
| }
 | |
| 
 | |
| /* -----------------------------------------------------------------------------
 | |
|  * EDID retrieval
 | |
|  */
 | |
| 
 | |
| static int adv7511_get_edid_block(void *data, u8 *buf, unsigned int block,
 | |
| 				  size_t len)
 | |
| {
 | |
| 	struct adv7511 *adv7511 = data;
 | |
| 	struct i2c_msg xfer[2];
 | |
| 	uint8_t offset;
 | |
| 	unsigned int i;
 | |
| 	int ret;
 | |
| 
 | |
| 	if (len > 128)
 | |
| 		return -EINVAL;
 | |
| 
 | |
| 	if (adv7511->current_edid_segment != block / 2) {
 | |
| 		unsigned int status;
 | |
| 
 | |
| 		ret = regmap_read(adv7511->regmap, ADV7511_REG_DDC_STATUS,
 | |
| 				  &status);
 | |
| 		if (ret < 0)
 | |
| 			return ret;
 | |
| 
 | |
| 		if (status != 2) {
 | |
| 			regmap_write(adv7511->regmap, ADV7511_REG_EDID_SEGMENT,
 | |
| 				     block);
 | |
| 			ret = adv7511_wait_for_interrupt(adv7511,
 | |
| 					ADV7511_INT0_EDID_READY |
 | |
| 					ADV7511_INT1_DDC_ERROR, 200);
 | |
| 
 | |
| 			if (!(ret & ADV7511_INT0_EDID_READY))
 | |
| 				return -EIO;
 | |
| 		}
 | |
| 
 | |
| 		regmap_write(adv7511->regmap, ADV7511_REG_INT(0),
 | |
| 			     ADV7511_INT0_EDID_READY | ADV7511_INT1_DDC_ERROR);
 | |
| 
 | |
| 		/* Break this apart, hopefully more I2C controllers will
 | |
| 		 * support 64 byte transfers than 256 byte transfers
 | |
| 		 */
 | |
| 
 | |
| 		xfer[0].addr = adv7511->i2c_edid->addr;
 | |
| 		xfer[0].flags = 0;
 | |
| 		xfer[0].len = 1;
 | |
| 		xfer[0].buf = &offset;
 | |
| 		xfer[1].addr = adv7511->i2c_edid->addr;
 | |
| 		xfer[1].flags = I2C_M_RD;
 | |
| 		xfer[1].len = 64;
 | |
| 		xfer[1].buf = adv7511->edid_buf;
 | |
| 
 | |
| 		offset = 0;
 | |
| 
 | |
| 		for (i = 0; i < 4; ++i) {
 | |
| 			ret = i2c_transfer(adv7511->i2c_edid->adapter, xfer,
 | |
| 					   ARRAY_SIZE(xfer));
 | |
| 			if (ret < 0)
 | |
| 				return ret;
 | |
| 			else if (ret != 2)
 | |
| 				return -EIO;
 | |
| 
 | |
| 			xfer[1].buf += 64;
 | |
| 			offset += 64;
 | |
| 		}
 | |
| 
 | |
| 		adv7511->current_edid_segment = block / 2;
 | |
| 	}
 | |
| 
 | |
| 	if (block % 2 == 0)
 | |
| 		memcpy(buf, adv7511->edid_buf, len);
 | |
| 	else
 | |
| 		memcpy(buf, adv7511->edid_buf + 128, len);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| /* -----------------------------------------------------------------------------
 | |
|  * Encoder operations
 | |
|  */
 | |
| 
 | |
| static int adv7511_get_modes(struct drm_encoder *encoder,
 | |
| 			     struct drm_connector *connector)
 | |
| {
 | |
| 	struct adv7511 *adv7511 = encoder_to_adv7511(encoder);
 | |
| 	struct edid *edid;
 | |
| 	unsigned int count;
 | |
| 
 | |
| 	/* Reading the EDID only works if the device is powered */
 | |
| 	if (adv7511->dpms_mode != DRM_MODE_DPMS_ON) {
 | |
| 		regmap_write(adv7511->regmap, ADV7511_REG_INT(0),
 | |
| 			     ADV7511_INT0_EDID_READY | ADV7511_INT1_DDC_ERROR);
 | |
| 		regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER,
 | |
| 				   ADV7511_POWER_POWER_DOWN, 0);
 | |
| 		adv7511->current_edid_segment = -1;
 | |
| 	}
 | |
| 
 | |
| 	edid = drm_do_get_edid(connector, adv7511_get_edid_block, adv7511);
 | |
| 
 | |
| 	if (adv7511->dpms_mode != DRM_MODE_DPMS_ON)
 | |
| 		regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER,
 | |
| 				   ADV7511_POWER_POWER_DOWN,
 | |
| 				   ADV7511_POWER_POWER_DOWN);
 | |
| 
 | |
| 	kfree(adv7511->edid);
 | |
| 	adv7511->edid = edid;
 | |
| 	if (!edid)
 | |
| 		return 0;
 | |
| 
 | |
| 	drm_mode_connector_update_edid_property(connector, edid);
 | |
| 	count = drm_add_edid_modes(connector, edid);
 | |
| 
 | |
| 	adv7511_set_config_csc(adv7511, connector, adv7511->rgb);
 | |
| 
 | |
| 	return count;
 | |
| }
 | |
| 
 | |
| static void adv7511_encoder_dpms(struct drm_encoder *encoder, int mode)
 | |
| {
 | |
| 	struct adv7511 *adv7511 = encoder_to_adv7511(encoder);
 | |
| 
 | |
| 	switch (mode) {
 | |
| 	case DRM_MODE_DPMS_ON:
 | |
| 		adv7511->current_edid_segment = -1;
 | |
| 
 | |
| 		regmap_write(adv7511->regmap, ADV7511_REG_INT(0),
 | |
| 			     ADV7511_INT0_EDID_READY | ADV7511_INT1_DDC_ERROR);
 | |
| 		regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER,
 | |
| 				   ADV7511_POWER_POWER_DOWN, 0);
 | |
| 		/*
 | |
| 		 * Per spec it is allowed to pulse the HDP signal to indicate
 | |
| 		 * that the EDID information has changed. Some monitors do this
 | |
| 		 * when they wakeup from standby or are enabled. When the HDP
 | |
| 		 * goes low the adv7511 is reset and the outputs are disabled
 | |
| 		 * which might cause the monitor to go to standby again. To
 | |
| 		 * avoid this we ignore the HDP pin for the first few seconds
 | |
| 		 * after enabeling the output.
 | |
| 		 */
 | |
| 		regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER2,
 | |
| 				   ADV7511_REG_POWER2_HDP_SRC_MASK,
 | |
| 				   ADV7511_REG_POWER2_HDP_SRC_NONE);
 | |
| 		/* Most of the registers are reset during power down or
 | |
| 		 * when HPD is low
 | |
| 		 */
 | |
| 		regcache_sync(adv7511->regmap);
 | |
| 		break;
 | |
| 	default:
 | |
| 		/* TODO: setup additional power down modes */
 | |
| 		regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER,
 | |
| 				   ADV7511_POWER_POWER_DOWN,
 | |
| 				   ADV7511_POWER_POWER_DOWN);
 | |
| 		regcache_mark_dirty(adv7511->regmap);
 | |
| 		break;
 | |
| 	}
 | |
| 
 | |
| 	adv7511->dpms_mode = mode;
 | |
| }
 | |
| 
 | |
| static enum drm_connector_status
 | |
| adv7511_encoder_detect(struct drm_encoder *encoder,
 | |
| 		       struct drm_connector *connector)
 | |
| {
 | |
| 	struct adv7511 *adv7511 = encoder_to_adv7511(encoder);
 | |
| 	enum drm_connector_status status;
 | |
| 	unsigned int val;
 | |
| 	bool hpd;
 | |
| 	int ret;
 | |
| 
 | |
| 	ret = regmap_read(adv7511->regmap, ADV7511_REG_STATUS, &val);
 | |
| 	if (ret < 0)
 | |
| 		return connector_status_disconnected;
 | |
| 
 | |
| 	if (val & ADV7511_STATUS_HPD)
 | |
| 		status = connector_status_connected;
 | |
| 	else
 | |
| 		status = connector_status_disconnected;
 | |
| 
 | |
| 	hpd = adv7511_hpd(adv7511);
 | |
| 
 | |
| 	/* The chip resets itself when the cable is disconnected, so in case
 | |
| 	 * there is a pending HPD interrupt and the cable is connected there was
 | |
| 	 * at least one transition from disconnected to connected and the chip
 | |
| 	 * has to be reinitialized. */
 | |
| 	if (status == connector_status_connected && hpd &&
 | |
| 	    adv7511->dpms_mode == DRM_MODE_DPMS_ON) {
 | |
| 		regcache_mark_dirty(adv7511->regmap);
 | |
| 		adv7511_encoder_dpms(encoder, adv7511->dpms_mode);
 | |
| 		adv7511_get_modes(encoder, connector);
 | |
| 		if (adv7511->status == connector_status_connected)
 | |
| 			status = connector_status_disconnected;
 | |
| 	} else {
 | |
| 		/* Renable HDP sensing */
 | |
| 		regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER2,
 | |
| 				   ADV7511_REG_POWER2_HDP_SRC_MASK,
 | |
| 				   ADV7511_REG_POWER2_HDP_SRC_BOTH);
 | |
| 	}
 | |
| 
 | |
| 	adv7511->status = status;
 | |
| 	return status;
 | |
| }
 | |
| 
 | |
| static int adv7511_encoder_mode_valid(struct drm_encoder *encoder,
 | |
| 				      struct drm_display_mode *mode)
 | |
| {
 | |
| 	if (mode->clock > 165000)
 | |
| 		return MODE_CLOCK_HIGH;
 | |
| 
 | |
| 	return MODE_OK;
 | |
| }
 | |
| 
 | |
| static void adv7511_encoder_mode_set(struct drm_encoder *encoder,
 | |
| 				     struct drm_display_mode *mode,
 | |
| 				     struct drm_display_mode *adj_mode)
 | |
| {
 | |
| 	struct adv7511 *adv7511 = encoder_to_adv7511(encoder);
 | |
| 	unsigned int low_refresh_rate;
 | |
| 	unsigned int hsync_polarity = 0;
 | |
| 	unsigned int vsync_polarity = 0;
 | |
| 
 | |
| 	if (adv7511->embedded_sync) {
 | |
| 		unsigned int hsync_offset, hsync_len;
 | |
| 		unsigned int vsync_offset, vsync_len;
 | |
| 
 | |
| 		hsync_offset = adj_mode->crtc_hsync_start -
 | |
| 			       adj_mode->crtc_hdisplay;
 | |
| 		vsync_offset = adj_mode->crtc_vsync_start -
 | |
| 			       adj_mode->crtc_vdisplay;
 | |
| 		hsync_len = adj_mode->crtc_hsync_end -
 | |
| 			    adj_mode->crtc_hsync_start;
 | |
| 		vsync_len = adj_mode->crtc_vsync_end -
 | |
| 			    adj_mode->crtc_vsync_start;
 | |
| 
 | |
| 		/* The hardware vsync generator has a off-by-one bug */
 | |
| 		vsync_offset += 1;
 | |
| 
 | |
| 		regmap_write(adv7511->regmap, ADV7511_REG_HSYNC_PLACEMENT_MSB,
 | |
| 			     ((hsync_offset >> 10) & 0x7) << 5);
 | |
| 		regmap_write(adv7511->regmap, ADV7511_REG_SYNC_DECODER(0),
 | |
| 			     (hsync_offset >> 2) & 0xff);
 | |
| 		regmap_write(adv7511->regmap, ADV7511_REG_SYNC_DECODER(1),
 | |
| 			     ((hsync_offset & 0x3) << 6) |
 | |
| 			     ((hsync_len >> 4) & 0x3f));
 | |
| 		regmap_write(adv7511->regmap, ADV7511_REG_SYNC_DECODER(2),
 | |
| 			     ((hsync_len & 0xf) << 4) |
 | |
| 			     ((vsync_offset >> 6) & 0xf));
 | |
| 		regmap_write(adv7511->regmap, ADV7511_REG_SYNC_DECODER(3),
 | |
| 			     ((vsync_offset & 0x3f) << 2) |
 | |
| 			     ((vsync_len >> 8) & 0x3));
 | |
| 		regmap_write(adv7511->regmap, ADV7511_REG_SYNC_DECODER(4),
 | |
| 			     vsync_len & 0xff);
 | |
| 
 | |
| 		hsync_polarity = !(adj_mode->flags & DRM_MODE_FLAG_PHSYNC);
 | |
| 		vsync_polarity = !(adj_mode->flags & DRM_MODE_FLAG_PVSYNC);
 | |
| 	} else {
 | |
| 		enum adv7511_sync_polarity mode_hsync_polarity;
 | |
| 		enum adv7511_sync_polarity mode_vsync_polarity;
 | |
| 
 | |
| 		/**
 | |
| 		 * If the input signal is always low or always high we want to
 | |
| 		 * invert or let it passthrough depending on the polarity of the
 | |
| 		 * current mode.
 | |
| 		 **/
 | |
| 		if (adj_mode->flags & DRM_MODE_FLAG_NHSYNC)
 | |
| 			mode_hsync_polarity = ADV7511_SYNC_POLARITY_LOW;
 | |
| 		else
 | |
| 			mode_hsync_polarity = ADV7511_SYNC_POLARITY_HIGH;
 | |
| 
 | |
| 		if (adj_mode->flags & DRM_MODE_FLAG_NVSYNC)
 | |
| 			mode_vsync_polarity = ADV7511_SYNC_POLARITY_LOW;
 | |
| 		else
 | |
| 			mode_vsync_polarity = ADV7511_SYNC_POLARITY_HIGH;
 | |
| 
 | |
| 		if (adv7511->hsync_polarity != mode_hsync_polarity &&
 | |
| 		    adv7511->hsync_polarity !=
 | |
| 		    ADV7511_SYNC_POLARITY_PASSTHROUGH)
 | |
| 			hsync_polarity = 1;
 | |
| 
 | |
| 		if (adv7511->vsync_polarity != mode_vsync_polarity &&
 | |
| 		    adv7511->vsync_polarity !=
 | |
| 		    ADV7511_SYNC_POLARITY_PASSTHROUGH)
 | |
| 			vsync_polarity = 1;
 | |
| 	}
 | |
| 
 | |
| 	if (mode->vrefresh <= 24000)
 | |
| 		low_refresh_rate = ADV7511_LOW_REFRESH_RATE_24HZ;
 | |
| 	else if (mode->vrefresh <= 25000)
 | |
| 		low_refresh_rate = ADV7511_LOW_REFRESH_RATE_25HZ;
 | |
| 	else if (mode->vrefresh <= 30000)
 | |
| 		low_refresh_rate = ADV7511_LOW_REFRESH_RATE_30HZ;
 | |
| 	else
 | |
| 		low_refresh_rate = ADV7511_LOW_REFRESH_RATE_NONE;
 | |
| 
 | |
| 	regmap_update_bits(adv7511->regmap, 0xfb,
 | |
| 		0x6, low_refresh_rate << 1);
 | |
| 	regmap_update_bits(adv7511->regmap, 0x17,
 | |
| 		0x60, (vsync_polarity << 6) | (hsync_polarity << 5));
 | |
| 
 | |
| 	/*
 | |
| 	 * TODO Test first order 4:2:2 to 4:4:4 up conversion method, which is
 | |
| 	 * supposed to give better results.
 | |
| 	 */
 | |
| 
 | |
| 	adv7511->f_tmds = mode->clock;
 | |
| }
 | |
| 
 | |
| static struct drm_encoder_slave_funcs adv7511_encoder_funcs = {
 | |
| 	.dpms = adv7511_encoder_dpms,
 | |
| 	.mode_valid = adv7511_encoder_mode_valid,
 | |
| 	.mode_set = adv7511_encoder_mode_set,
 | |
| 	.detect = adv7511_encoder_detect,
 | |
| 	.get_modes = adv7511_get_modes,
 | |
| };
 | |
| 
 | |
| /* -----------------------------------------------------------------------------
 | |
|  * Probe & remove
 | |
|  */
 | |
| 
 | |
| static int adv7511_parse_dt(struct device_node *np,
 | |
| 			    struct adv7511_link_config *config)
 | |
| {
 | |
| 	const char *str;
 | |
| 	int ret;
 | |
| 
 | |
| 	memset(config, 0, sizeof(*config));
 | |
| 
 | |
| 	of_property_read_u32(np, "adi,input-depth", &config->input_color_depth);
 | |
| 	if (config->input_color_depth != 8 && config->input_color_depth != 10 &&
 | |
| 	    config->input_color_depth != 12)
 | |
| 		return -EINVAL;
 | |
| 
 | |
| 	ret = of_property_read_string(np, "adi,input-colorspace", &str);
 | |
| 	if (ret < 0)
 | |
| 		return ret;
 | |
| 
 | |
| 	if (!strcmp(str, "rgb"))
 | |
| 		config->input_colorspace = HDMI_COLORSPACE_RGB;
 | |
| 	else if (!strcmp(str, "yuv422"))
 | |
| 		config->input_colorspace = HDMI_COLORSPACE_YUV422;
 | |
| 	else if (!strcmp(str, "yuv444"))
 | |
| 		config->input_colorspace = HDMI_COLORSPACE_YUV444;
 | |
| 	else
 | |
| 		return -EINVAL;
 | |
| 
 | |
| 	ret = of_property_read_string(np, "adi,input-clock", &str);
 | |
| 	if (ret < 0)
 | |
| 		return ret;
 | |
| 
 | |
| 	if (!strcmp(str, "1x"))
 | |
| 		config->input_clock = ADV7511_INPUT_CLOCK_1X;
 | |
| 	else if (!strcmp(str, "2x"))
 | |
| 		config->input_clock = ADV7511_INPUT_CLOCK_2X;
 | |
| 	else if (!strcmp(str, "ddr"))
 | |
| 		config->input_clock = ADV7511_INPUT_CLOCK_DDR;
 | |
| 	else
 | |
| 		return -EINVAL;
 | |
| 
 | |
| 	if (config->input_colorspace == HDMI_COLORSPACE_YUV422 ||
 | |
| 	    config->input_clock != ADV7511_INPUT_CLOCK_1X) {
 | |
| 		ret = of_property_read_u32(np, "adi,input-style",
 | |
| 					   &config->input_style);
 | |
| 		if (ret)
 | |
| 			return ret;
 | |
| 
 | |
| 		if (config->input_style < 1 || config->input_style > 3)
 | |
| 			return -EINVAL;
 | |
| 
 | |
| 		ret = of_property_read_string(np, "adi,input-justification",
 | |
| 					      &str);
 | |
| 		if (ret < 0)
 | |
| 			return ret;
 | |
| 
 | |
| 		if (!strcmp(str, "left"))
 | |
| 			config->input_justification =
 | |
| 				ADV7511_INPUT_JUSTIFICATION_LEFT;
 | |
| 		else if (!strcmp(str, "evenly"))
 | |
| 			config->input_justification =
 | |
| 				ADV7511_INPUT_JUSTIFICATION_EVENLY;
 | |
| 		else if (!strcmp(str, "right"))
 | |
| 			config->input_justification =
 | |
| 				ADV7511_INPUT_JUSTIFICATION_RIGHT;
 | |
| 		else
 | |
| 			return -EINVAL;
 | |
| 
 | |
| 	} else {
 | |
| 		config->input_style = 1;
 | |
| 		config->input_justification = ADV7511_INPUT_JUSTIFICATION_LEFT;
 | |
| 	}
 | |
| 
 | |
| 	of_property_read_u32(np, "adi,clock-delay", &config->clock_delay);
 | |
| 	if (config->clock_delay < -1200 || config->clock_delay > 1600)
 | |
| 		return -EINVAL;
 | |
| 
 | |
| 	config->embedded_sync = of_property_read_bool(np, "adi,embedded-sync");
 | |
| 
 | |
| 	/* Hardcode the sync pulse configurations for now. */
 | |
| 	config->sync_pulse = ADV7511_INPUT_SYNC_PULSE_NONE;
 | |
| 	config->vsync_polarity = ADV7511_SYNC_POLARITY_PASSTHROUGH;
 | |
| 	config->hsync_polarity = ADV7511_SYNC_POLARITY_PASSTHROUGH;
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static const int edid_i2c_addr = 0x7e;
 | |
| static const int packet_i2c_addr = 0x70;
 | |
| static const int cec_i2c_addr = 0x78;
 | |
| 
 | |
| static int adv7511_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
 | |
| {
 | |
| 	struct adv7511_link_config link_config;
 | |
| 	struct adv7511 *adv7511;
 | |
| 	struct device *dev = &i2c->dev;
 | |
| 	unsigned int val;
 | |
| 	int ret;
 | |
| 
 | |
| 	if (!dev->of_node)
 | |
| 		return -EINVAL;
 | |
| 
 | |
| 	adv7511 = devm_kzalloc(dev, sizeof(*adv7511), GFP_KERNEL);
 | |
| 	if (!adv7511)
 | |
| 		return -ENOMEM;
 | |
| 
 | |
| 	adv7511->dpms_mode = DRM_MODE_DPMS_OFF;
 | |
| 	adv7511->status = connector_status_disconnected;
 | |
| 
 | |
| 	ret = adv7511_parse_dt(dev->of_node, &link_config);
 | |
| 	if (ret)
 | |
| 		return ret;
 | |
| 
 | |
| 	/*
 | |
| 	 * The power down GPIO is optional. If present, toggle it from active to
 | |
| 	 * inactive to wake up the encoder.
 | |
| 	 */
 | |
| 	adv7511->gpio_pd = devm_gpiod_get_optional(dev, "pd", GPIOD_OUT_HIGH);
 | |
| 	if (IS_ERR(adv7511->gpio_pd))
 | |
| 		return PTR_ERR(adv7511->gpio_pd);
 | |
| 
 | |
| 	if (adv7511->gpio_pd) {
 | |
| 		mdelay(5);
 | |
| 		gpiod_set_value_cansleep(adv7511->gpio_pd, 0);
 | |
| 	}
 | |
| 
 | |
| 	adv7511->regmap = devm_regmap_init_i2c(i2c, &adv7511_regmap_config);
 | |
| 	if (IS_ERR(adv7511->regmap))
 | |
| 		return PTR_ERR(adv7511->regmap);
 | |
| 
 | |
| 	ret = regmap_read(adv7511->regmap, ADV7511_REG_CHIP_REVISION, &val);
 | |
| 	if (ret)
 | |
| 		return ret;
 | |
| 	dev_dbg(dev, "Rev. %d\n", val);
 | |
| 
 | |
| 	ret = regmap_register_patch(adv7511->regmap, adv7511_fixed_registers,
 | |
| 				    ARRAY_SIZE(adv7511_fixed_registers));
 | |
| 	if (ret)
 | |
| 		return ret;
 | |
| 
 | |
| 	regmap_write(adv7511->regmap, ADV7511_REG_EDID_I2C_ADDR, edid_i2c_addr);
 | |
| 	regmap_write(adv7511->regmap, ADV7511_REG_PACKET_I2C_ADDR,
 | |
| 		     packet_i2c_addr);
 | |
| 	regmap_write(adv7511->regmap, ADV7511_REG_CEC_I2C_ADDR, cec_i2c_addr);
 | |
| 	adv7511_packet_disable(adv7511, 0xffff);
 | |
| 
 | |
| 	adv7511->i2c_main = i2c;
 | |
| 	adv7511->i2c_edid = i2c_new_dummy(i2c->adapter, edid_i2c_addr >> 1);
 | |
| 	if (!adv7511->i2c_edid)
 | |
| 		return -ENOMEM;
 | |
| 
 | |
| 	if (i2c->irq) {
 | |
| 		init_waitqueue_head(&adv7511->wq);
 | |
| 
 | |
| 		ret = devm_request_threaded_irq(dev, i2c->irq, NULL,
 | |
| 						adv7511_irq_handler,
 | |
| 						IRQF_ONESHOT, dev_name(dev),
 | |
| 						adv7511);
 | |
| 		if (ret)
 | |
| 			goto err_i2c_unregister_device;
 | |
| 	}
 | |
| 
 | |
| 	/* CEC is unused for now */
 | |
| 	regmap_write(adv7511->regmap, ADV7511_REG_CEC_CTRL,
 | |
| 		     ADV7511_CEC_CTRL_POWER_DOWN);
 | |
| 
 | |
| 	regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER,
 | |
| 			   ADV7511_POWER_POWER_DOWN, ADV7511_POWER_POWER_DOWN);
 | |
| 
 | |
| 	adv7511->current_edid_segment = -1;
 | |
| 
 | |
| 	i2c_set_clientdata(i2c, adv7511);
 | |
| 
 | |
| 	adv7511_set_link_config(adv7511, &link_config);
 | |
| 
 | |
| 	return 0;
 | |
| 
 | |
| err_i2c_unregister_device:
 | |
| 	i2c_unregister_device(adv7511->i2c_edid);
 | |
| 
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| static int adv7511_remove(struct i2c_client *i2c)
 | |
| {
 | |
| 	struct adv7511 *adv7511 = i2c_get_clientdata(i2c);
 | |
| 
 | |
| 	i2c_unregister_device(adv7511->i2c_edid);
 | |
| 
 | |
| 	kfree(adv7511->edid);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int adv7511_encoder_init(struct i2c_client *i2c, struct drm_device *dev,
 | |
| 				struct drm_encoder_slave *encoder)
 | |
| {
 | |
| 
 | |
| 	struct adv7511 *adv7511 = i2c_get_clientdata(i2c);
 | |
| 
 | |
| 	encoder->slave_priv = adv7511;
 | |
| 	encoder->slave_funcs = &adv7511_encoder_funcs;
 | |
| 
 | |
| 	adv7511->encoder = &encoder->base;
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static const struct i2c_device_id adv7511_i2c_ids[] = {
 | |
| 	{ "adv7511", 0 },
 | |
| 	{ "adv7511w", 0 },
 | |
| 	{ "adv7513", 0 },
 | |
| 	{ }
 | |
| };
 | |
| MODULE_DEVICE_TABLE(i2c, adv7511_i2c_ids);
 | |
| 
 | |
| static const struct of_device_id adv7511_of_ids[] = {
 | |
| 	{ .compatible = "adi,adv7511", },
 | |
| 	{ .compatible = "adi,adv7511w", },
 | |
| 	{ .compatible = "adi,adv7513", },
 | |
| 	{ }
 | |
| };
 | |
| MODULE_DEVICE_TABLE(of, adv7511_of_ids);
 | |
| 
 | |
| static struct drm_i2c_encoder_driver adv7511_driver = {
 | |
| 	.i2c_driver = {
 | |
| 		.driver = {
 | |
| 			.name = "adv7511",
 | |
| 			.of_match_table = adv7511_of_ids,
 | |
| 		},
 | |
| 		.id_table = adv7511_i2c_ids,
 | |
| 		.probe = adv7511_probe,
 | |
| 		.remove = adv7511_remove,
 | |
| 	},
 | |
| 
 | |
| 	.encoder_init = adv7511_encoder_init,
 | |
| };
 | |
| 
 | |
| static int __init adv7511_init(void)
 | |
| {
 | |
| 	return drm_i2c_encoder_register(THIS_MODULE, &adv7511_driver);
 | |
| }
 | |
| module_init(adv7511_init);
 | |
| 
 | |
| static void __exit adv7511_exit(void)
 | |
| {
 | |
| 	drm_i2c_encoder_unregister(&adv7511_driver);
 | |
| }
 | |
| module_exit(adv7511_exit);
 | |
| 
 | |
| MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
 | |
| MODULE_DESCRIPTION("ADV7511 HDMI transmitter driver");
 | |
| MODULE_LICENSE("GPL");
 |