 61ab9efddf
			
		
	
	
	61ab9efddf
	
	
	
		
			
			After this patch:
[   32.985530] hso: drivers/net/usb/hso.c: Option Wireless
[   33.000452] hso 2-1.4:1.7: Not our interface
[   33.001849] usbcore: registered new interface driver hso
root@qt5022:~# ls /dev/ttyHS*
/dev/ttyHS0  /dev/ttyHS1  /dev/ttyHS2  /dev/ttyHS3  /dev/ttyHS4
/dev/ttyHS5
root@qt5022:~# lsusb -d 0af0: -vvv
Bus 002 Device 003: ID 0af0:9200 Option
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass          255 Vendor Specific Class
  bDeviceSubClass       255 Vendor Specific Subclass
  bDeviceProtocol       255 Vendor Specific Protocol
  bMaxPacketSize0        64
  idVendor           0x0af0 Option
  idProduct          0x9200
  bcdDevice            0.00
  iManufacturer           3 Option N.V.
  iProduct                2 Globetrotter HSUPA Modem
  iSerial                 0
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength          200
    bNumInterfaces          8
    bConfigurationValue     1
    iConfiguration          1 Option Configuration
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower              100mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass    255 Vendor Specific Subclass
      bInterfaceProtocol    255 Vendor Specific Protocol
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval              32
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x01  EP 1 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval              32
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        1
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass    255 Vendor Specific Subclass
      bInterfaceProtocol    255 Vendor Specific Protocol
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x82  EP 2 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval              32
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x02  EP 2 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval              32
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        2
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass    255 Vendor Specific Subclass
      bInterfaceProtocol    255 Vendor Specific Protocol
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x83  EP 3 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval              32
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x03  EP 3 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval              32
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        3
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass    255 Vendor Specific Subclass
      bInterfaceProtocol    255 Vendor Specific Protocol
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x84  EP 4 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval              32
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x04  EP 4 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval              32
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        4
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass    255 Vendor Specific Subclass
      bInterfaceProtocol    255 Vendor Specific Protocol
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x85  EP 5 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval              32
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x05  EP 5 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval              32
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        5
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass    255 Vendor Specific Subclass
      bInterfaceProtocol    255 Vendor Specific Protocol
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x06  EP 6 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval              32
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x86  EP 6 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval              32
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        6
      bAlternateSetting       0
      bNumEndpoints           3
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass    255 Vendor Specific Subclass
      bInterfaceProtocol    255 Vendor Specific Protocol
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x87  EP 7 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               5
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x88  EP 8 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval              32
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x07  EP 7 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval              32
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        7
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass         8 Mass Storage
      bInterfaceSubClass      6 SCSI
      bInterfaceProtocol     80 Bulk-Only
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x08  EP 8 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               1
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x89  EP 9 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               1
Device Qualifier (for other device speed):
  bLength                10
  bDescriptorType         6
  bcdUSB               2.00
  bDeviceClass          255 Vendor Specific Class
  bDeviceSubClass       255 Vendor Specific Subclass
  bDeviceProtocol       255 Vendor Specific Protocol
  bMaxPacketSize0        64
  bNumConfigurations      1
Device Status:     0x0001
  Self Powered
Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Acked-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
		
	
			
		
			
				
	
	
		
			3327 lines
		
	
	
	
		
			83 KiB
			
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			3327 lines
		
	
	
	
		
			83 KiB
			
		
	
	
	
		
			C
		
	
	
	
	
	
| /******************************************************************************
 | |
|  *
 | |
|  * Driver for Option High Speed Mobile Devices.
 | |
|  *
 | |
|  *  Copyright (C) 2008 Option International
 | |
|  *                     Filip Aben <f.aben@option.com>
 | |
|  *                     Denis Joseph Barrow <d.barow@option.com>
 | |
|  *                     Jan Dumon <j.dumon@option.com>
 | |
|  *  Copyright (C) 2007 Andrew Bird (Sphere Systems Ltd)
 | |
|  *  			<ajb@spheresystems.co.uk>
 | |
|  *  Copyright (C) 2008 Greg Kroah-Hartman <gregkh@suse.de>
 | |
|  *  Copyright (C) 2008 Novell, Inc.
 | |
|  *
 | |
|  *  This program is free software; you can redistribute it and/or modify
 | |
|  *  it under the terms of the GNU General Public License version 2 as
 | |
|  *  published by the Free Software Foundation.
 | |
|  *
 | |
|  *  This program is distributed in the hope that it will be useful,
 | |
|  *  but WITHOUT ANY WARRANTY; without even the implied warranty of
 | |
|  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 | |
|  *  GNU General Public License for more details.
 | |
|  *
 | |
|  *  You should have received a copy of the GNU General Public License
 | |
|  *  along with this program; if not, write to the Free Software
 | |
|  *  Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301,
 | |
|  *  USA
 | |
|  *
 | |
|  *
 | |
|  *****************************************************************************/
 | |
| 
 | |
| /******************************************************************************
 | |
|  *
 | |
|  * Description of the device:
 | |
|  *
 | |
|  * Interface 0:	Contains the IP network interface on the bulk end points.
 | |
|  *		The multiplexed serial ports are using the interrupt and
 | |
|  *		control endpoints.
 | |
|  *		Interrupt contains a bitmap telling which multiplexed
 | |
|  *		serialport needs servicing.
 | |
|  *
 | |
|  * Interface 1:	Diagnostics port, uses bulk only, do not submit urbs until the
 | |
|  *		port is opened, as this have a huge impact on the network port
 | |
|  *		throughput.
 | |
|  *
 | |
|  * Interface 2:	Standard modem interface - circuit switched interface, this
 | |
|  *		can be used to make a standard ppp connection however it
 | |
|  *              should not be used in conjunction with the IP network interface
 | |
|  *              enabled for USB performance reasons i.e. if using this set
 | |
|  *              ideally disable_net=1.
 | |
|  *
 | |
|  *****************************************************************************/
 | |
| 
 | |
| #include <linux/sched.h>
 | |
| #include <linux/slab.h>
 | |
| #include <linux/init.h>
 | |
| #include <linux/delay.h>
 | |
| #include <linux/netdevice.h>
 | |
| #include <linux/module.h>
 | |
| #include <linux/ethtool.h>
 | |
| #include <linux/usb.h>
 | |
| #include <linux/timer.h>
 | |
| #include <linux/tty.h>
 | |
| #include <linux/tty_driver.h>
 | |
| #include <linux/tty_flip.h>
 | |
| #include <linux/kmod.h>
 | |
| #include <linux/rfkill.h>
 | |
| #include <linux/ip.h>
 | |
| #include <linux/uaccess.h>
 | |
| #include <linux/usb/cdc.h>
 | |
| #include <net/arp.h>
 | |
| #include <asm/byteorder.h>
 | |
| #include <linux/serial_core.h>
 | |
| #include <linux/serial.h>
 | |
| 
 | |
| 
 | |
| #define MOD_AUTHOR			"Option Wireless"
 | |
| #define MOD_DESCRIPTION			"USB High Speed Option driver"
 | |
| #define MOD_LICENSE			"GPL"
 | |
| 
 | |
| #define HSO_MAX_NET_DEVICES		10
 | |
| #define HSO__MAX_MTU			2048
 | |
| #define DEFAULT_MTU			1500
 | |
| #define DEFAULT_MRU			1500
 | |
| 
 | |
| #define CTRL_URB_RX_SIZE		1024
 | |
| #define CTRL_URB_TX_SIZE		64
 | |
| 
 | |
| #define BULK_URB_RX_SIZE		4096
 | |
| #define BULK_URB_TX_SIZE		8192
 | |
| 
 | |
| #define MUX_BULK_RX_BUF_SIZE		HSO__MAX_MTU
 | |
| #define MUX_BULK_TX_BUF_SIZE		HSO__MAX_MTU
 | |
| #define MUX_BULK_RX_BUF_COUNT		4
 | |
| #define USB_TYPE_OPTION_VENDOR		0x20
 | |
| 
 | |
| /* These definitions are used with the struct hso_net flags element */
 | |
| /* - use *_bit operations on it. (bit indices not values.) */
 | |
| #define HSO_NET_RUNNING			0
 | |
| 
 | |
| #define	HSO_NET_TX_TIMEOUT		(HZ*10)
 | |
| 
 | |
| #define HSO_SERIAL_MAGIC		0x48534f31
 | |
| 
 | |
| /* Number of ttys to handle */
 | |
| #define HSO_SERIAL_TTY_MINORS		256
 | |
| 
 | |
| #define MAX_RX_URBS			2
 | |
| 
 | |
| /*****************************************************************************/
 | |
| /* Debugging functions                                                       */
 | |
| /*****************************************************************************/
 | |
| #define D__(lvl_, fmt, arg...)				\
 | |
| 	do {						\
 | |
| 		printk(lvl_ "[%d:%s]: " fmt "\n",	\
 | |
| 		       __LINE__, __func__, ## arg);	\
 | |
| 	} while (0)
 | |
| 
 | |
| #define D_(lvl, args...)				\
 | |
| 	do {						\
 | |
| 		if (lvl & debug)			\
 | |
| 			D__(KERN_INFO, args);		\
 | |
| 	} while (0)
 | |
| 
 | |
| #define D1(args...)	D_(0x01, ##args)
 | |
| #define D2(args...)	D_(0x02, ##args)
 | |
| #define D3(args...)	D_(0x04, ##args)
 | |
| #define D4(args...)	D_(0x08, ##args)
 | |
| #define D5(args...)	D_(0x10, ##args)
 | |
| 
 | |
| /*****************************************************************************/
 | |
| /* Enumerators                                                               */
 | |
| /*****************************************************************************/
 | |
| enum pkt_parse_state {
 | |
| 	WAIT_IP,
 | |
| 	WAIT_DATA,
 | |
| 	WAIT_SYNC
 | |
| };
 | |
| 
 | |
| /*****************************************************************************/
 | |
| /* Structs                                                                   */
 | |
| /*****************************************************************************/
 | |
| 
 | |
| struct hso_shared_int {
 | |
| 	struct usb_endpoint_descriptor *intr_endp;
 | |
| 	void *shared_intr_buf;
 | |
| 	struct urb *shared_intr_urb;
 | |
| 	struct usb_device *usb;
 | |
| 	int use_count;
 | |
| 	int ref_count;
 | |
| 	struct mutex shared_int_lock;
 | |
| };
 | |
| 
 | |
| struct hso_net {
 | |
| 	struct hso_device *parent;
 | |
| 	struct net_device *net;
 | |
| 	struct rfkill *rfkill;
 | |
| 
 | |
| 	struct usb_endpoint_descriptor *in_endp;
 | |
| 	struct usb_endpoint_descriptor *out_endp;
 | |
| 
 | |
| 	struct urb *mux_bulk_rx_urb_pool[MUX_BULK_RX_BUF_COUNT];
 | |
| 	struct urb *mux_bulk_tx_urb;
 | |
| 	void *mux_bulk_rx_buf_pool[MUX_BULK_RX_BUF_COUNT];
 | |
| 	void *mux_bulk_tx_buf;
 | |
| 
 | |
| 	struct sk_buff *skb_rx_buf;
 | |
| 	struct sk_buff *skb_tx_buf;
 | |
| 
 | |
| 	enum pkt_parse_state rx_parse_state;
 | |
| 	spinlock_t net_lock;
 | |
| 
 | |
| 	unsigned short rx_buf_size;
 | |
| 	unsigned short rx_buf_missing;
 | |
| 	struct iphdr rx_ip_hdr;
 | |
| 
 | |
| 	unsigned long flags;
 | |
| };
 | |
| 
 | |
| enum rx_ctrl_state{
 | |
| 	RX_IDLE,
 | |
| 	RX_SENT,
 | |
| 	RX_PENDING
 | |
| };
 | |
| 
 | |
| #define BM_REQUEST_TYPE (0xa1)
 | |
| #define B_NOTIFICATION  (0x20)
 | |
| #define W_VALUE         (0x0)
 | |
| #define W_LENGTH        (0x2)
 | |
| 
 | |
| #define B_OVERRUN       (0x1<<6)
 | |
| #define B_PARITY        (0x1<<5)
 | |
| #define B_FRAMING       (0x1<<4)
 | |
| #define B_RING_SIGNAL   (0x1<<3)
 | |
| #define B_BREAK         (0x1<<2)
 | |
| #define B_TX_CARRIER    (0x1<<1)
 | |
| #define B_RX_CARRIER    (0x1<<0)
 | |
| 
 | |
| struct hso_serial_state_notification {
 | |
| 	u8 bmRequestType;
 | |
| 	u8 bNotification;
 | |
| 	u16 wValue;
 | |
| 	u16 wIndex;
 | |
| 	u16 wLength;
 | |
| 	u16 UART_state_bitmap;
 | |
| } __packed;
 | |
| 
 | |
| struct hso_tiocmget {
 | |
| 	struct mutex mutex;
 | |
| 	wait_queue_head_t waitq;
 | |
| 	int    intr_completed;
 | |
| 	struct usb_endpoint_descriptor *endp;
 | |
| 	struct urb *urb;
 | |
| 	struct hso_serial_state_notification serial_state_notification;
 | |
| 	u16    prev_UART_state_bitmap;
 | |
| 	struct uart_icount icount;
 | |
| };
 | |
| 
 | |
| 
 | |
| struct hso_serial {
 | |
| 	struct hso_device *parent;
 | |
| 	int magic;
 | |
| 	u8 minor;
 | |
| 
 | |
| 	struct hso_shared_int *shared_int;
 | |
| 
 | |
| 	/* rx/tx urb could be either a bulk urb or a control urb depending
 | |
| 	   on which serial port it is used on. */
 | |
| 	struct urb *rx_urb[MAX_RX_URBS];
 | |
| 	u8 num_rx_urbs;
 | |
| 	u8 *rx_data[MAX_RX_URBS];
 | |
| 	u16 rx_data_length;	/* should contain allocated length */
 | |
| 
 | |
| 	struct urb *tx_urb;
 | |
| 	u8 *tx_data;
 | |
| 	u8 *tx_buffer;
 | |
| 	u16 tx_data_length;	/* should contain allocated length */
 | |
| 	u16 tx_data_count;
 | |
| 	u16 tx_buffer_count;
 | |
| 	struct usb_ctrlrequest ctrl_req_tx;
 | |
| 	struct usb_ctrlrequest ctrl_req_rx;
 | |
| 
 | |
| 	struct usb_endpoint_descriptor *in_endp;
 | |
| 	struct usb_endpoint_descriptor *out_endp;
 | |
| 
 | |
| 	enum rx_ctrl_state rx_state;
 | |
| 	u8 rts_state;
 | |
| 	u8 dtr_state;
 | |
| 	unsigned tx_urb_used:1;
 | |
| 
 | |
| 	struct tty_port port;
 | |
| 	/* from usb_serial_port */
 | |
| 	spinlock_t serial_lock;
 | |
| 
 | |
| 	int (*write_data) (struct hso_serial *serial);
 | |
| 	struct hso_tiocmget  *tiocmget;
 | |
| 	/* Hacks required to get flow control
 | |
| 	 * working on the serial receive buffers
 | |
| 	 * so as not to drop characters on the floor.
 | |
| 	 */
 | |
| 	int  curr_rx_urb_idx;
 | |
| 	u8   rx_urb_filled[MAX_RX_URBS];
 | |
| 	struct tasklet_struct unthrottle_tasklet;
 | |
| };
 | |
| 
 | |
| struct hso_device {
 | |
| 	union {
 | |
| 		struct hso_serial *dev_serial;
 | |
| 		struct hso_net *dev_net;
 | |
| 	} port_data;
 | |
| 
 | |
| 	u32 port_spec;
 | |
| 
 | |
| 	u8 is_active;
 | |
| 	u8 usb_gone;
 | |
| 	struct work_struct async_get_intf;
 | |
| 	struct work_struct async_put_intf;
 | |
| 	struct work_struct reset_device;
 | |
| 
 | |
| 	struct usb_device *usb;
 | |
| 	struct usb_interface *interface;
 | |
| 
 | |
| 	struct device *dev;
 | |
| 	struct kref ref;
 | |
| 	struct mutex mutex;
 | |
| };
 | |
| 
 | |
| /* Type of interface */
 | |
| #define HSO_INTF_MASK		0xFF00
 | |
| #define	HSO_INTF_MUX		0x0100
 | |
| #define	HSO_INTF_BULK   	0x0200
 | |
| 
 | |
| /* Type of port */
 | |
| #define HSO_PORT_MASK		0xFF
 | |
| #define HSO_PORT_NO_PORT	0x0
 | |
| #define	HSO_PORT_CONTROL	0x1
 | |
| #define	HSO_PORT_APP		0x2
 | |
| #define	HSO_PORT_GPS		0x3
 | |
| #define	HSO_PORT_PCSC		0x4
 | |
| #define	HSO_PORT_APP2		0x5
 | |
| #define HSO_PORT_GPS_CONTROL	0x6
 | |
| #define HSO_PORT_MSD		0x7
 | |
| #define HSO_PORT_VOICE		0x8
 | |
| #define HSO_PORT_DIAG2		0x9
 | |
| #define	HSO_PORT_DIAG		0x10
 | |
| #define	HSO_PORT_MODEM		0x11
 | |
| #define	HSO_PORT_NETWORK	0x12
 | |
| 
 | |
| /* Additional device info */
 | |
| #define HSO_INFO_MASK		0xFF000000
 | |
| #define HSO_INFO_CRC_BUG	0x01000000
 | |
| 
 | |
| /*****************************************************************************/
 | |
| /* Prototypes                                                                */
 | |
| /*****************************************************************************/
 | |
| /* Serial driver functions */
 | |
| static int hso_serial_tiocmset(struct tty_struct *tty,
 | |
| 			       unsigned int set, unsigned int clear);
 | |
| static void ctrl_callback(struct urb *urb);
 | |
| static int put_rxbuf_data(struct urb *urb, struct hso_serial *serial);
 | |
| static void hso_kick_transmit(struct hso_serial *serial);
 | |
| /* Helper functions */
 | |
| static int hso_mux_submit_intr_urb(struct hso_shared_int *mux_int,
 | |
| 				   struct usb_device *usb, gfp_t gfp);
 | |
| static void handle_usb_error(int status, const char *function,
 | |
| 			     struct hso_device *hso_dev);
 | |
| static struct usb_endpoint_descriptor *hso_get_ep(struct usb_interface *intf,
 | |
| 						  int type, int dir);
 | |
| static int hso_get_mux_ports(struct usb_interface *intf, unsigned char *ports);
 | |
| static void hso_free_interface(struct usb_interface *intf);
 | |
| static int hso_start_serial_device(struct hso_device *hso_dev, gfp_t flags);
 | |
| static int hso_stop_serial_device(struct hso_device *hso_dev);
 | |
| static int hso_start_net_device(struct hso_device *hso_dev);
 | |
| static void hso_free_shared_int(struct hso_shared_int *shared_int);
 | |
| static int hso_stop_net_device(struct hso_device *hso_dev);
 | |
| static void hso_serial_ref_free(struct kref *ref);
 | |
| static void hso_std_serial_read_bulk_callback(struct urb *urb);
 | |
| static int hso_mux_serial_read(struct hso_serial *serial);
 | |
| static void async_get_intf(struct work_struct *data);
 | |
| static void async_put_intf(struct work_struct *data);
 | |
| static int hso_put_activity(struct hso_device *hso_dev);
 | |
| static int hso_get_activity(struct hso_device *hso_dev);
 | |
| static void tiocmget_intr_callback(struct urb *urb);
 | |
| static void reset_device(struct work_struct *data);
 | |
| /*****************************************************************************/
 | |
| /* Helping functions                                                         */
 | |
| /*****************************************************************************/
 | |
| 
 | |
| /* #define DEBUG */
 | |
| 
 | |
| static inline struct hso_net *dev2net(struct hso_device *hso_dev)
 | |
| {
 | |
| 	return hso_dev->port_data.dev_net;
 | |
| }
 | |
| 
 | |
| static inline struct hso_serial *dev2ser(struct hso_device *hso_dev)
 | |
| {
 | |
| 	return hso_dev->port_data.dev_serial;
 | |
| }
 | |
| 
 | |
| /* Debugging functions */
 | |
| #ifdef DEBUG
 | |
| static void dbg_dump(int line_count, const char *func_name, unsigned char *buf,
 | |
| 		     unsigned int len)
 | |
| {
 | |
| 	static char name[255];
 | |
| 
 | |
| 	sprintf(name, "hso[%d:%s]", line_count, func_name);
 | |
| 	print_hex_dump_bytes(name, DUMP_PREFIX_NONE, buf, len);
 | |
| }
 | |
| 
 | |
| #define DUMP(buf_, len_)	\
 | |
| 	dbg_dump(__LINE__, __func__, (unsigned char *)buf_, len_)
 | |
| 
 | |
| #define DUMP1(buf_, len_)			\
 | |
| 	do {					\
 | |
| 		if (0x01 & debug)		\
 | |
| 			DUMP(buf_, len_);	\
 | |
| 	} while (0)
 | |
| #else
 | |
| #define DUMP(buf_, len_)
 | |
| #define DUMP1(buf_, len_)
 | |
| #endif
 | |
| 
 | |
| /* module parameters */
 | |
| static int debug;
 | |
| static int tty_major;
 | |
| static int disable_net;
 | |
| 
 | |
| /* driver info */
 | |
| static const char driver_name[] = "hso";
 | |
| static const char tty_filename[] = "ttyHS";
 | |
| static const char *version = __FILE__ ": " MOD_AUTHOR;
 | |
| /* the usb driver itself (registered in hso_init) */
 | |
| static struct usb_driver hso_driver;
 | |
| /* serial structures */
 | |
| static struct tty_driver *tty_drv;
 | |
| static struct hso_device *serial_table[HSO_SERIAL_TTY_MINORS];
 | |
| static struct hso_device *network_table[HSO_MAX_NET_DEVICES];
 | |
| static spinlock_t serial_table_lock;
 | |
| 
 | |
| static const s32 default_port_spec[] = {
 | |
| 	HSO_INTF_MUX | HSO_PORT_NETWORK,
 | |
| 	HSO_INTF_BULK | HSO_PORT_DIAG,
 | |
| 	HSO_INTF_BULK | HSO_PORT_MODEM,
 | |
| 	0
 | |
| };
 | |
| 
 | |
| static const s32 icon321_port_spec[] = {
 | |
| 	HSO_INTF_MUX | HSO_PORT_NETWORK,
 | |
| 	HSO_INTF_BULK | HSO_PORT_DIAG2,
 | |
| 	HSO_INTF_BULK | HSO_PORT_MODEM,
 | |
| 	HSO_INTF_BULK | HSO_PORT_DIAG,
 | |
| 	0
 | |
| };
 | |
| 
 | |
| #define default_port_device(vendor, product)	\
 | |
| 	USB_DEVICE(vendor, product),	\
 | |
| 		.driver_info = (kernel_ulong_t)default_port_spec
 | |
| 
 | |
| #define icon321_port_device(vendor, product)	\
 | |
| 	USB_DEVICE(vendor, product),	\
 | |
| 		.driver_info = (kernel_ulong_t)icon321_port_spec
 | |
| 
 | |
| /* list of devices we support */
 | |
| static const struct usb_device_id hso_ids[] = {
 | |
| 	{default_port_device(0x0af0, 0x6711)},
 | |
| 	{default_port_device(0x0af0, 0x6731)},
 | |
| 	{default_port_device(0x0af0, 0x6751)},
 | |
| 	{default_port_device(0x0af0, 0x6771)},
 | |
| 	{default_port_device(0x0af0, 0x6791)},
 | |
| 	{default_port_device(0x0af0, 0x6811)},
 | |
| 	{default_port_device(0x0af0, 0x6911)},
 | |
| 	{default_port_device(0x0af0, 0x6951)},
 | |
| 	{default_port_device(0x0af0, 0x6971)},
 | |
| 	{default_port_device(0x0af0, 0x7011)},
 | |
| 	{default_port_device(0x0af0, 0x7031)},
 | |
| 	{default_port_device(0x0af0, 0x7051)},
 | |
| 	{default_port_device(0x0af0, 0x7071)},
 | |
| 	{default_port_device(0x0af0, 0x7111)},
 | |
| 	{default_port_device(0x0af0, 0x7211)},
 | |
| 	{default_port_device(0x0af0, 0x7251)},
 | |
| 	{default_port_device(0x0af0, 0x7271)},
 | |
| 	{default_port_device(0x0af0, 0x7311)},
 | |
| 	{default_port_device(0x0af0, 0xc031)},	/* Icon-Edge */
 | |
| 	{icon321_port_device(0x0af0, 0xd013)},	/* Module HSxPA */
 | |
| 	{icon321_port_device(0x0af0, 0xd031)},	/* Icon-321 */
 | |
| 	{icon321_port_device(0x0af0, 0xd033)},	/* Icon-322 */
 | |
| 	{USB_DEVICE(0x0af0, 0x7301)},		/* GE40x */
 | |
| 	{USB_DEVICE(0x0af0, 0x7361)},		/* GE40x */
 | |
| 	{USB_DEVICE(0x0af0, 0x7381)},		/* GE40x */
 | |
| 	{USB_DEVICE(0x0af0, 0x7401)},		/* GI 0401 */
 | |
| 	{USB_DEVICE(0x0af0, 0x7501)},		/* GTM 382 */
 | |
| 	{USB_DEVICE(0x0af0, 0x7601)},		/* GE40x */
 | |
| 	{USB_DEVICE(0x0af0, 0x7701)},
 | |
| 	{USB_DEVICE(0x0af0, 0x7706)},
 | |
| 	{USB_DEVICE(0x0af0, 0x7801)},
 | |
| 	{USB_DEVICE(0x0af0, 0x7901)},
 | |
| 	{USB_DEVICE(0x0af0, 0x7A01)},
 | |
| 	{USB_DEVICE(0x0af0, 0x7A05)},
 | |
| 	{USB_DEVICE(0x0af0, 0x8200)},
 | |
| 	{USB_DEVICE(0x0af0, 0x8201)},
 | |
| 	{USB_DEVICE(0x0af0, 0x8300)},
 | |
| 	{USB_DEVICE(0x0af0, 0x8302)},
 | |
| 	{USB_DEVICE(0x0af0, 0x8304)},
 | |
| 	{USB_DEVICE(0x0af0, 0x8400)},
 | |
| 	{USB_DEVICE(0x0af0, 0x8600)},
 | |
| 	{USB_DEVICE(0x0af0, 0x8800)},
 | |
| 	{USB_DEVICE(0x0af0, 0x8900)},
 | |
| 	{USB_DEVICE(0x0af0, 0x9000)},
 | |
| 	{USB_DEVICE(0x0af0, 0x9200)},		/* Option GTM671WFS */
 | |
| 	{USB_DEVICE(0x0af0, 0xd035)},
 | |
| 	{USB_DEVICE(0x0af0, 0xd055)},
 | |
| 	{USB_DEVICE(0x0af0, 0xd155)},
 | |
| 	{USB_DEVICE(0x0af0, 0xd255)},
 | |
| 	{USB_DEVICE(0x0af0, 0xd057)},
 | |
| 	{USB_DEVICE(0x0af0, 0xd157)},
 | |
| 	{USB_DEVICE(0x0af0, 0xd257)},
 | |
| 	{USB_DEVICE(0x0af0, 0xd357)},
 | |
| 	{USB_DEVICE(0x0af0, 0xd058)},
 | |
| 	{USB_DEVICE(0x0af0, 0xc100)},
 | |
| 	{}
 | |
| };
 | |
| MODULE_DEVICE_TABLE(usb, hso_ids);
 | |
| 
 | |
| /* Sysfs attribute */
 | |
| static ssize_t hso_sysfs_show_porttype(struct device *dev,
 | |
| 				       struct device_attribute *attr,
 | |
| 				       char *buf)
 | |
| {
 | |
| 	struct hso_device *hso_dev = dev_get_drvdata(dev);
 | |
| 	char *port_name;
 | |
| 
 | |
| 	if (!hso_dev)
 | |
| 		return 0;
 | |
| 
 | |
| 	switch (hso_dev->port_spec & HSO_PORT_MASK) {
 | |
| 	case HSO_PORT_CONTROL:
 | |
| 		port_name = "Control";
 | |
| 		break;
 | |
| 	case HSO_PORT_APP:
 | |
| 		port_name = "Application";
 | |
| 		break;
 | |
| 	case HSO_PORT_APP2:
 | |
| 		port_name = "Application2";
 | |
| 		break;
 | |
| 	case HSO_PORT_GPS:
 | |
| 		port_name = "GPS";
 | |
| 		break;
 | |
| 	case HSO_PORT_GPS_CONTROL:
 | |
| 		port_name = "GPS Control";
 | |
| 		break;
 | |
| 	case HSO_PORT_PCSC:
 | |
| 		port_name = "PCSC";
 | |
| 		break;
 | |
| 	case HSO_PORT_DIAG:
 | |
| 		port_name = "Diagnostic";
 | |
| 		break;
 | |
| 	case HSO_PORT_DIAG2:
 | |
| 		port_name = "Diagnostic2";
 | |
| 		break;
 | |
| 	case HSO_PORT_MODEM:
 | |
| 		port_name = "Modem";
 | |
| 		break;
 | |
| 	case HSO_PORT_NETWORK:
 | |
| 		port_name = "Network";
 | |
| 		break;
 | |
| 	default:
 | |
| 		port_name = "Unknown";
 | |
| 		break;
 | |
| 	}
 | |
| 
 | |
| 	return sprintf(buf, "%s\n", port_name);
 | |
| }
 | |
| static DEVICE_ATTR(hsotype, S_IRUGO, hso_sysfs_show_porttype, NULL);
 | |
| 
 | |
| static int hso_urb_to_index(struct hso_serial *serial, struct urb *urb)
 | |
| {
 | |
| 	int idx;
 | |
| 
 | |
| 	for (idx = 0; idx < serial->num_rx_urbs; idx++)
 | |
| 		if (serial->rx_urb[idx] == urb)
 | |
| 			return idx;
 | |
| 	dev_err(serial->parent->dev, "hso_urb_to_index failed\n");
 | |
| 	return -1;
 | |
| }
 | |
| 
 | |
| /* converts mux value to a port spec value */
 | |
| static u32 hso_mux_to_port(int mux)
 | |
| {
 | |
| 	u32 result;
 | |
| 
 | |
| 	switch (mux) {
 | |
| 	case 0x1:
 | |
| 		result = HSO_PORT_CONTROL;
 | |
| 		break;
 | |
| 	case 0x2:
 | |
| 		result = HSO_PORT_APP;
 | |
| 		break;
 | |
| 	case 0x4:
 | |
| 		result = HSO_PORT_PCSC;
 | |
| 		break;
 | |
| 	case 0x8:
 | |
| 		result = HSO_PORT_GPS;
 | |
| 		break;
 | |
| 	case 0x10:
 | |
| 		result = HSO_PORT_APP2;
 | |
| 		break;
 | |
| 	default:
 | |
| 		result = HSO_PORT_NO_PORT;
 | |
| 	}
 | |
| 	return result;
 | |
| }
 | |
| 
 | |
| /* converts port spec value to a mux value */
 | |
| static u32 hso_port_to_mux(int port)
 | |
| {
 | |
| 	u32 result;
 | |
| 
 | |
| 	switch (port & HSO_PORT_MASK) {
 | |
| 	case HSO_PORT_CONTROL:
 | |
| 		result = 0x0;
 | |
| 		break;
 | |
| 	case HSO_PORT_APP:
 | |
| 		result = 0x1;
 | |
| 		break;
 | |
| 	case HSO_PORT_PCSC:
 | |
| 		result = 0x2;
 | |
| 		break;
 | |
| 	case HSO_PORT_GPS:
 | |
| 		result = 0x3;
 | |
| 		break;
 | |
| 	case HSO_PORT_APP2:
 | |
| 		result = 0x4;
 | |
| 		break;
 | |
| 	default:
 | |
| 		result = 0x0;
 | |
| 	}
 | |
| 	return result;
 | |
| }
 | |
| 
 | |
| static struct hso_serial *get_serial_by_shared_int_and_type(
 | |
| 					struct hso_shared_int *shared_int,
 | |
| 					int mux)
 | |
| {
 | |
| 	int i, port;
 | |
| 
 | |
| 	port = hso_mux_to_port(mux);
 | |
| 
 | |
| 	for (i = 0; i < HSO_SERIAL_TTY_MINORS; i++) {
 | |
| 		if (serial_table[i] &&
 | |
| 		    (dev2ser(serial_table[i])->shared_int == shared_int) &&
 | |
| 		    ((serial_table[i]->port_spec & HSO_PORT_MASK) == port)) {
 | |
| 			return dev2ser(serial_table[i]);
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	return NULL;
 | |
| }
 | |
| 
 | |
| static struct hso_serial *get_serial_by_index(unsigned index)
 | |
| {
 | |
| 	struct hso_serial *serial = NULL;
 | |
| 	unsigned long flags;
 | |
| 
 | |
| 	spin_lock_irqsave(&serial_table_lock, flags);
 | |
| 	if (serial_table[index])
 | |
| 		serial = dev2ser(serial_table[index]);
 | |
| 	spin_unlock_irqrestore(&serial_table_lock, flags);
 | |
| 
 | |
| 	return serial;
 | |
| }
 | |
| 
 | |
| static int get_free_serial_index(void)
 | |
| {
 | |
| 	int index;
 | |
| 	unsigned long flags;
 | |
| 
 | |
| 	spin_lock_irqsave(&serial_table_lock, flags);
 | |
| 	for (index = 0; index < HSO_SERIAL_TTY_MINORS; index++) {
 | |
| 		if (serial_table[index] == NULL) {
 | |
| 			spin_unlock_irqrestore(&serial_table_lock, flags);
 | |
| 			return index;
 | |
| 		}
 | |
| 	}
 | |
| 	spin_unlock_irqrestore(&serial_table_lock, flags);
 | |
| 
 | |
| 	printk(KERN_ERR "%s: no free serial devices in table\n", __func__);
 | |
| 	return -1;
 | |
| }
 | |
| 
 | |
| static void set_serial_by_index(unsigned index, struct hso_serial *serial)
 | |
| {
 | |
| 	unsigned long flags;
 | |
| 
 | |
| 	spin_lock_irqsave(&serial_table_lock, flags);
 | |
| 	if (serial)
 | |
| 		serial_table[index] = serial->parent;
 | |
| 	else
 | |
| 		serial_table[index] = NULL;
 | |
| 	spin_unlock_irqrestore(&serial_table_lock, flags);
 | |
| }
 | |
| 
 | |
| static void handle_usb_error(int status, const char *function,
 | |
| 			     struct hso_device *hso_dev)
 | |
| {
 | |
| 	char *explanation;
 | |
| 
 | |
| 	switch (status) {
 | |
| 	case -ENODEV:
 | |
| 		explanation = "no device";
 | |
| 		break;
 | |
| 	case -ENOENT:
 | |
| 		explanation = "endpoint not enabled";
 | |
| 		break;
 | |
| 	case -EPIPE:
 | |
| 		explanation = "endpoint stalled";
 | |
| 		break;
 | |
| 	case -ENOSPC:
 | |
| 		explanation = "not enough bandwidth";
 | |
| 		break;
 | |
| 	case -ESHUTDOWN:
 | |
| 		explanation = "device disabled";
 | |
| 		break;
 | |
| 	case -EHOSTUNREACH:
 | |
| 		explanation = "device suspended";
 | |
| 		break;
 | |
| 	case -EINVAL:
 | |
| 	case -EAGAIN:
 | |
| 	case -EFBIG:
 | |
| 	case -EMSGSIZE:
 | |
| 		explanation = "internal error";
 | |
| 		break;
 | |
| 	case -EILSEQ:
 | |
| 	case -EPROTO:
 | |
| 	case -ETIME:
 | |
| 	case -ETIMEDOUT:
 | |
| 		explanation = "protocol error";
 | |
| 		if (hso_dev)
 | |
| 			schedule_work(&hso_dev->reset_device);
 | |
| 		break;
 | |
| 	default:
 | |
| 		explanation = "unknown status";
 | |
| 		break;
 | |
| 	}
 | |
| 
 | |
| 	/* log a meaningful explanation of an USB status */
 | |
| 	D1("%s: received USB status - %s (%d)", function, explanation, status);
 | |
| }
 | |
| 
 | |
| /* Network interface functions */
 | |
| 
 | |
| /* called when net interface is brought up by ifconfig */
 | |
| static int hso_net_open(struct net_device *net)
 | |
| {
 | |
| 	struct hso_net *odev = netdev_priv(net);
 | |
| 	unsigned long flags = 0;
 | |
| 
 | |
| 	if (!odev) {
 | |
| 		dev_err(&net->dev, "No net device !\n");
 | |
| 		return -ENODEV;
 | |
| 	}
 | |
| 
 | |
| 	odev->skb_tx_buf = NULL;
 | |
| 
 | |
| 	/* setup environment */
 | |
| 	spin_lock_irqsave(&odev->net_lock, flags);
 | |
| 	odev->rx_parse_state = WAIT_IP;
 | |
| 	odev->rx_buf_size = 0;
 | |
| 	odev->rx_buf_missing = sizeof(struct iphdr);
 | |
| 	spin_unlock_irqrestore(&odev->net_lock, flags);
 | |
| 
 | |
| 	/* We are up and running. */
 | |
| 	set_bit(HSO_NET_RUNNING, &odev->flags);
 | |
| 	hso_start_net_device(odev->parent);
 | |
| 
 | |
| 	/* Tell the kernel we are ready to start receiving from it */
 | |
| 	netif_start_queue(net);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| /* called when interface is brought down by ifconfig */
 | |
| static int hso_net_close(struct net_device *net)
 | |
| {
 | |
| 	struct hso_net *odev = netdev_priv(net);
 | |
| 
 | |
| 	/* we don't need the queue anymore */
 | |
| 	netif_stop_queue(net);
 | |
| 	/* no longer running */
 | |
| 	clear_bit(HSO_NET_RUNNING, &odev->flags);
 | |
| 
 | |
| 	hso_stop_net_device(odev->parent);
 | |
| 
 | |
| 	/* done */
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| /* USB tells is xmit done, we should start the netqueue again */
 | |
| static void write_bulk_callback(struct urb *urb)
 | |
| {
 | |
| 	struct hso_net *odev = urb->context;
 | |
| 	int status = urb->status;
 | |
| 
 | |
| 	/* Sanity check */
 | |
| 	if (!odev || !test_bit(HSO_NET_RUNNING, &odev->flags)) {
 | |
| 		dev_err(&urb->dev->dev, "%s: device not running\n", __func__);
 | |
| 		return;
 | |
| 	}
 | |
| 
 | |
| 	/* Do we still have a valid kernel network device? */
 | |
| 	if (!netif_device_present(odev->net)) {
 | |
| 		dev_err(&urb->dev->dev, "%s: net device not present\n",
 | |
| 			__func__);
 | |
| 		return;
 | |
| 	}
 | |
| 
 | |
| 	/* log status, but don't act on it, we don't need to resubmit anything
 | |
| 	 * anyhow */
 | |
| 	if (status)
 | |
| 		handle_usb_error(status, __func__, odev->parent);
 | |
| 
 | |
| 	hso_put_activity(odev->parent);
 | |
| 
 | |
| 	/* Tell the network interface we are ready for another frame */
 | |
| 	netif_wake_queue(odev->net);
 | |
| }
 | |
| 
 | |
| /* called by kernel when we need to transmit a packet */
 | |
| static netdev_tx_t hso_net_start_xmit(struct sk_buff *skb,
 | |
| 					    struct net_device *net)
 | |
| {
 | |
| 	struct hso_net *odev = netdev_priv(net);
 | |
| 	int result;
 | |
| 
 | |
| 	/* Tell the kernel, "No more frames 'til we are done with this one." */
 | |
| 	netif_stop_queue(net);
 | |
| 	if (hso_get_activity(odev->parent) == -EAGAIN) {
 | |
| 		odev->skb_tx_buf = skb;
 | |
| 		return NETDEV_TX_OK;
 | |
| 	}
 | |
| 
 | |
| 	/* log if asked */
 | |
| 	DUMP1(skb->data, skb->len);
 | |
| 	/* Copy it from kernel memory to OUR memory */
 | |
| 	memcpy(odev->mux_bulk_tx_buf, skb->data, skb->len);
 | |
| 	D1("len: %d/%d", skb->len, MUX_BULK_TX_BUF_SIZE);
 | |
| 
 | |
| 	/* Fill in the URB for shipping it out. */
 | |
| 	usb_fill_bulk_urb(odev->mux_bulk_tx_urb,
 | |
| 			  odev->parent->usb,
 | |
| 			  usb_sndbulkpipe(odev->parent->usb,
 | |
| 					  odev->out_endp->
 | |
| 					  bEndpointAddress & 0x7F),
 | |
| 			  odev->mux_bulk_tx_buf, skb->len, write_bulk_callback,
 | |
| 			  odev);
 | |
| 
 | |
| 	/* Deal with the Zero Length packet problem, I hope */
 | |
| 	odev->mux_bulk_tx_urb->transfer_flags |= URB_ZERO_PACKET;
 | |
| 
 | |
| 	/* Send the URB on its merry way. */
 | |
| 	result = usb_submit_urb(odev->mux_bulk_tx_urb, GFP_ATOMIC);
 | |
| 	if (result) {
 | |
| 		dev_warn(&odev->parent->interface->dev,
 | |
| 			"failed mux_bulk_tx_urb %d\n", result);
 | |
| 		net->stats.tx_errors++;
 | |
| 		netif_start_queue(net);
 | |
| 	} else {
 | |
| 		net->stats.tx_packets++;
 | |
| 		net->stats.tx_bytes += skb->len;
 | |
| 	}
 | |
| 	dev_kfree_skb(skb);
 | |
| 	/* we're done */
 | |
| 	return NETDEV_TX_OK;
 | |
| }
 | |
| 
 | |
| static const struct ethtool_ops ops = {
 | |
| 	.get_link = ethtool_op_get_link
 | |
| };
 | |
| 
 | |
| /* called when a packet did not ack after watchdogtimeout */
 | |
| static void hso_net_tx_timeout(struct net_device *net)
 | |
| {
 | |
| 	struct hso_net *odev = netdev_priv(net);
 | |
| 
 | |
| 	if (!odev)
 | |
| 		return;
 | |
| 
 | |
| 	/* Tell syslog we are hosed. */
 | |
| 	dev_warn(&net->dev, "Tx timed out.\n");
 | |
| 
 | |
| 	/* Tear the waiting frame off the list */
 | |
| 	if (odev->mux_bulk_tx_urb &&
 | |
| 	    (odev->mux_bulk_tx_urb->status == -EINPROGRESS))
 | |
| 		usb_unlink_urb(odev->mux_bulk_tx_urb);
 | |
| 
 | |
| 	/* Update statistics */
 | |
| 	net->stats.tx_errors++;
 | |
| }
 | |
| 
 | |
| /* make a real packet from the received USB buffer */
 | |
| static void packetizeRx(struct hso_net *odev, unsigned char *ip_pkt,
 | |
| 			unsigned int count, unsigned char is_eop)
 | |
| {
 | |
| 	unsigned short temp_bytes;
 | |
| 	unsigned short buffer_offset = 0;
 | |
| 	unsigned short frame_len;
 | |
| 	unsigned char *tmp_rx_buf;
 | |
| 
 | |
| 	/* log if needed */
 | |
| 	D1("Rx %d bytes", count);
 | |
| 	DUMP(ip_pkt, min(128, (int)count));
 | |
| 
 | |
| 	while (count) {
 | |
| 		switch (odev->rx_parse_state) {
 | |
| 		case WAIT_IP:
 | |
| 			/* waiting for IP header. */
 | |
| 			/* wanted bytes - size of ip header */
 | |
| 			temp_bytes =
 | |
| 			    (count <
 | |
| 			     odev->rx_buf_missing) ? count : odev->
 | |
| 			    rx_buf_missing;
 | |
| 
 | |
| 			memcpy(((unsigned char *)(&odev->rx_ip_hdr)) +
 | |
| 			       odev->rx_buf_size, ip_pkt + buffer_offset,
 | |
| 			       temp_bytes);
 | |
| 
 | |
| 			odev->rx_buf_size += temp_bytes;
 | |
| 			buffer_offset += temp_bytes;
 | |
| 			odev->rx_buf_missing -= temp_bytes;
 | |
| 			count -= temp_bytes;
 | |
| 
 | |
| 			if (!odev->rx_buf_missing) {
 | |
| 				/* header is complete allocate an sk_buffer and
 | |
| 				 * continue to WAIT_DATA */
 | |
| 				frame_len = ntohs(odev->rx_ip_hdr.tot_len);
 | |
| 
 | |
| 				if ((frame_len > DEFAULT_MRU) ||
 | |
| 				    (frame_len < sizeof(struct iphdr))) {
 | |
| 					dev_err(&odev->net->dev,
 | |
| 						"Invalid frame (%d) length\n",
 | |
| 						frame_len);
 | |
| 					odev->rx_parse_state = WAIT_SYNC;
 | |
| 					continue;
 | |
| 				}
 | |
| 				/* Allocate an sk_buff */
 | |
| 				odev->skb_rx_buf = netdev_alloc_skb(odev->net,
 | |
| 								    frame_len);
 | |
| 				if (!odev->skb_rx_buf) {
 | |
| 					/* We got no receive buffer. */
 | |
| 					D1("could not allocate memory");
 | |
| 					odev->rx_parse_state = WAIT_SYNC;
 | |
| 					return;
 | |
| 				}
 | |
| 
 | |
| 				/* Copy what we got so far. make room for iphdr
 | |
| 				 * after tail. */
 | |
| 				tmp_rx_buf =
 | |
| 				    skb_put(odev->skb_rx_buf,
 | |
| 					    sizeof(struct iphdr));
 | |
| 				memcpy(tmp_rx_buf, (char *)&(odev->rx_ip_hdr),
 | |
| 				       sizeof(struct iphdr));
 | |
| 
 | |
| 				/* ETH_HLEN */
 | |
| 				odev->rx_buf_size = sizeof(struct iphdr);
 | |
| 
 | |
| 				/* Filip actually use .tot_len */
 | |
| 				odev->rx_buf_missing =
 | |
| 				    frame_len - sizeof(struct iphdr);
 | |
| 				odev->rx_parse_state = WAIT_DATA;
 | |
| 			}
 | |
| 			break;
 | |
| 
 | |
| 		case WAIT_DATA:
 | |
| 			temp_bytes = (count < odev->rx_buf_missing)
 | |
| 					? count : odev->rx_buf_missing;
 | |
| 
 | |
| 			/* Copy the rest of the bytes that are left in the
 | |
| 			 * buffer into the waiting sk_buf. */
 | |
| 			/* Make room for temp_bytes after tail. */
 | |
| 			tmp_rx_buf = skb_put(odev->skb_rx_buf, temp_bytes);
 | |
| 			memcpy(tmp_rx_buf, ip_pkt + buffer_offset, temp_bytes);
 | |
| 
 | |
| 			odev->rx_buf_missing -= temp_bytes;
 | |
| 			count -= temp_bytes;
 | |
| 			buffer_offset += temp_bytes;
 | |
| 			odev->rx_buf_size += temp_bytes;
 | |
| 			if (!odev->rx_buf_missing) {
 | |
| 				/* Packet is complete. Inject into stack. */
 | |
| 				/* We have IP packet here */
 | |
| 				odev->skb_rx_buf->protocol = cpu_to_be16(ETH_P_IP);
 | |
| 				skb_reset_mac_header(odev->skb_rx_buf);
 | |
| 
 | |
| 				/* Ship it off to the kernel */
 | |
| 				netif_rx(odev->skb_rx_buf);
 | |
| 				/* No longer our buffer. */
 | |
| 				odev->skb_rx_buf = NULL;
 | |
| 
 | |
| 				/* update out statistics */
 | |
| 				odev->net->stats.rx_packets++;
 | |
| 
 | |
| 				odev->net->stats.rx_bytes += odev->rx_buf_size;
 | |
| 
 | |
| 				odev->rx_buf_size = 0;
 | |
| 				odev->rx_buf_missing = sizeof(struct iphdr);
 | |
| 				odev->rx_parse_state = WAIT_IP;
 | |
| 			}
 | |
| 			break;
 | |
| 
 | |
| 		case WAIT_SYNC:
 | |
| 			D1(" W_S");
 | |
| 			count = 0;
 | |
| 			break;
 | |
| 		default:
 | |
| 			D1(" ");
 | |
| 			count--;
 | |
| 			break;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	/* Recovery mechanism for WAIT_SYNC state. */
 | |
| 	if (is_eop) {
 | |
| 		if (odev->rx_parse_state == WAIT_SYNC) {
 | |
| 			odev->rx_parse_state = WAIT_IP;
 | |
| 			odev->rx_buf_size = 0;
 | |
| 			odev->rx_buf_missing = sizeof(struct iphdr);
 | |
| 		}
 | |
| 	}
 | |
| }
 | |
| 
 | |
| static void fix_crc_bug(struct urb *urb, __le16 max_packet_size)
 | |
| {
 | |
| 	static const u8 crc_check[4] = { 0xDE, 0xAD, 0xBE, 0xEF };
 | |
| 	u32 rest = urb->actual_length % le16_to_cpu(max_packet_size);
 | |
| 
 | |
| 	if (((rest == 5) || (rest == 6)) &&
 | |
| 	    !memcmp(((u8 *)urb->transfer_buffer) + urb->actual_length - 4,
 | |
| 		    crc_check, 4)) {
 | |
| 		urb->actual_length -= 4;
 | |
| 	}
 | |
| }
 | |
| 
 | |
| /* Moving data from usb to kernel (in interrupt state) */
 | |
| static void read_bulk_callback(struct urb *urb)
 | |
| {
 | |
| 	struct hso_net *odev = urb->context;
 | |
| 	struct net_device *net;
 | |
| 	int result;
 | |
| 	int status = urb->status;
 | |
| 
 | |
| 	/* is al ok?  (Filip: Who's Al ?) */
 | |
| 	if (status) {
 | |
| 		handle_usb_error(status, __func__, odev->parent);
 | |
| 		return;
 | |
| 	}
 | |
| 
 | |
| 	/* Sanity check */
 | |
| 	if (!odev || !test_bit(HSO_NET_RUNNING, &odev->flags)) {
 | |
| 		D1("BULK IN callback but driver is not active!");
 | |
| 		return;
 | |
| 	}
 | |
| 	usb_mark_last_busy(urb->dev);
 | |
| 
 | |
| 	net = odev->net;
 | |
| 
 | |
| 	if (!netif_device_present(net)) {
 | |
| 		/* Somebody killed our network interface... */
 | |
| 		return;
 | |
| 	}
 | |
| 
 | |
| 	if (odev->parent->port_spec & HSO_INFO_CRC_BUG)
 | |
| 		fix_crc_bug(urb, odev->in_endp->wMaxPacketSize);
 | |
| 
 | |
| 	/* do we even have a packet? */
 | |
| 	if (urb->actual_length) {
 | |
| 		/* Handle the IP stream, add header and push it onto network
 | |
| 		 * stack if the packet is complete. */
 | |
| 		spin_lock(&odev->net_lock);
 | |
| 		packetizeRx(odev, urb->transfer_buffer, urb->actual_length,
 | |
| 			    (urb->transfer_buffer_length >
 | |
| 			     urb->actual_length) ? 1 : 0);
 | |
| 		spin_unlock(&odev->net_lock);
 | |
| 	}
 | |
| 
 | |
| 	/* We are done with this URB, resubmit it. Prep the USB to wait for
 | |
| 	 * another frame. Reuse same as received. */
 | |
| 	usb_fill_bulk_urb(urb,
 | |
| 			  odev->parent->usb,
 | |
| 			  usb_rcvbulkpipe(odev->parent->usb,
 | |
| 					  odev->in_endp->
 | |
| 					  bEndpointAddress & 0x7F),
 | |
| 			  urb->transfer_buffer, MUX_BULK_RX_BUF_SIZE,
 | |
| 			  read_bulk_callback, odev);
 | |
| 
 | |
| 	/* Give this to the USB subsystem so it can tell us when more data
 | |
| 	 * arrives. */
 | |
| 	result = usb_submit_urb(urb, GFP_ATOMIC);
 | |
| 	if (result)
 | |
| 		dev_warn(&odev->parent->interface->dev,
 | |
| 			 "%s failed submit mux_bulk_rx_urb %d\n", __func__,
 | |
| 			 result);
 | |
| }
 | |
| 
 | |
| /* Serial driver functions */
 | |
| 
 | |
| static void hso_init_termios(struct ktermios *termios)
 | |
| {
 | |
| 	/*
 | |
| 	 * The default requirements for this device are:
 | |
| 	 */
 | |
| 	termios->c_iflag &=
 | |
| 		~(IGNBRK	/* disable ignore break */
 | |
| 		| BRKINT	/* disable break causes interrupt */
 | |
| 		| PARMRK	/* disable mark parity errors */
 | |
| 		| ISTRIP	/* disable clear high bit of input characters */
 | |
| 		| INLCR		/* disable translate NL to CR */
 | |
| 		| IGNCR		/* disable ignore CR */
 | |
| 		| ICRNL		/* disable translate CR to NL */
 | |
| 		| IXON);	/* disable enable XON/XOFF flow control */
 | |
| 
 | |
| 	/* disable postprocess output characters */
 | |
| 	termios->c_oflag &= ~OPOST;
 | |
| 
 | |
| 	termios->c_lflag &=
 | |
| 		~(ECHO		/* disable echo input characters */
 | |
| 		| ECHONL	/* disable echo new line */
 | |
| 		| ICANON	/* disable erase, kill, werase, and rprnt
 | |
| 				   special characters */
 | |
| 		| ISIG		/* disable interrupt, quit, and suspend special
 | |
| 				   characters */
 | |
| 		| IEXTEN);	/* disable non-POSIX special characters */
 | |
| 
 | |
| 	termios->c_cflag &=
 | |
| 		~(CSIZE		/* no size */
 | |
| 		| PARENB	/* disable parity bit */
 | |
| 		| CBAUD		/* clear current baud rate */
 | |
| 		| CBAUDEX);	/* clear current buad rate */
 | |
| 
 | |
| 	termios->c_cflag |= CS8;	/* character size 8 bits */
 | |
| 
 | |
| 	/* baud rate 115200 */
 | |
| 	tty_termios_encode_baud_rate(termios, 115200, 115200);
 | |
| }
 | |
| 
 | |
| static void _hso_serial_set_termios(struct tty_struct *tty,
 | |
| 				    struct ktermios *old)
 | |
| {
 | |
| 	struct hso_serial *serial = tty->driver_data;
 | |
| 
 | |
| 	if (!serial) {
 | |
| 		printk(KERN_ERR "%s: no tty structures", __func__);
 | |
| 		return;
 | |
| 	}
 | |
| 
 | |
| 	D4("port %d", serial->minor);
 | |
| 
 | |
| 	/*
 | |
| 	 *	Fix up unsupported bits
 | |
| 	 */
 | |
| 	tty->termios.c_iflag &= ~IXON; /* disable enable XON/XOFF flow control */
 | |
| 
 | |
| 	tty->termios.c_cflag &=
 | |
| 		~(CSIZE		/* no size */
 | |
| 		| PARENB	/* disable parity bit */
 | |
| 		| CBAUD		/* clear current baud rate */
 | |
| 		| CBAUDEX);	/* clear current buad rate */
 | |
| 
 | |
| 	tty->termios.c_cflag |= CS8;	/* character size 8 bits */
 | |
| 
 | |
| 	/* baud rate 115200 */
 | |
| 	tty_encode_baud_rate(tty, 115200, 115200);
 | |
| }
 | |
| 
 | |
| static void hso_resubmit_rx_bulk_urb(struct hso_serial *serial, struct urb *urb)
 | |
| {
 | |
| 	int result;
 | |
| 	/* We are done with this URB, resubmit it. Prep the USB to wait for
 | |
| 	 * another frame */
 | |
| 	usb_fill_bulk_urb(urb, serial->parent->usb,
 | |
| 			  usb_rcvbulkpipe(serial->parent->usb,
 | |
| 					  serial->in_endp->
 | |
| 					  bEndpointAddress & 0x7F),
 | |
| 			  urb->transfer_buffer, serial->rx_data_length,
 | |
| 			  hso_std_serial_read_bulk_callback, serial);
 | |
| 	/* Give this to the USB subsystem so it can tell us when more data
 | |
| 	 * arrives. */
 | |
| 	result = usb_submit_urb(urb, GFP_ATOMIC);
 | |
| 	if (result) {
 | |
| 		dev_err(&urb->dev->dev, "%s failed submit serial rx_urb %d\n",
 | |
| 			__func__, result);
 | |
| 	}
 | |
| }
 | |
| 
 | |
| 
 | |
| 
 | |
| 
 | |
| static void put_rxbuf_data_and_resubmit_bulk_urb(struct hso_serial *serial)
 | |
| {
 | |
| 	int count;
 | |
| 	struct urb *curr_urb;
 | |
| 
 | |
| 	while (serial->rx_urb_filled[serial->curr_rx_urb_idx]) {
 | |
| 		curr_urb = serial->rx_urb[serial->curr_rx_urb_idx];
 | |
| 		count = put_rxbuf_data(curr_urb, serial);
 | |
| 		if (count == -1)
 | |
| 			return;
 | |
| 		if (count == 0) {
 | |
| 			serial->curr_rx_urb_idx++;
 | |
| 			if (serial->curr_rx_urb_idx >= serial->num_rx_urbs)
 | |
| 				serial->curr_rx_urb_idx = 0;
 | |
| 			hso_resubmit_rx_bulk_urb(serial, curr_urb);
 | |
| 		}
 | |
| 	}
 | |
| }
 | |
| 
 | |
| static void put_rxbuf_data_and_resubmit_ctrl_urb(struct hso_serial *serial)
 | |
| {
 | |
| 	int count = 0;
 | |
| 	struct urb *urb;
 | |
| 
 | |
| 	urb = serial->rx_urb[0];
 | |
| 	if (serial->port.count > 0) {
 | |
| 		count = put_rxbuf_data(urb, serial);
 | |
| 		if (count == -1)
 | |
| 			return;
 | |
| 	}
 | |
| 	/* Re issue a read as long as we receive data. */
 | |
| 
 | |
| 	if (count == 0 && ((urb->actual_length != 0) ||
 | |
| 			   (serial->rx_state == RX_PENDING))) {
 | |
| 		serial->rx_state = RX_SENT;
 | |
| 		hso_mux_serial_read(serial);
 | |
| 	} else
 | |
| 		serial->rx_state = RX_IDLE;
 | |
| }
 | |
| 
 | |
| 
 | |
| /* read callback for Diag and CS port */
 | |
| static void hso_std_serial_read_bulk_callback(struct urb *urb)
 | |
| {
 | |
| 	struct hso_serial *serial = urb->context;
 | |
| 	int status = urb->status;
 | |
| 
 | |
| 	D4("\n--- Got serial_read_bulk callback %02x ---", status);
 | |
| 
 | |
| 	/* sanity check */
 | |
| 	if (!serial) {
 | |
| 		D1("serial == NULL");
 | |
| 		return;
 | |
| 	}
 | |
| 	if (status) {
 | |
| 		handle_usb_error(status, __func__, serial->parent);
 | |
| 		return;
 | |
| 	}
 | |
| 
 | |
| 	D1("Actual length = %d\n", urb->actual_length);
 | |
| 	DUMP1(urb->transfer_buffer, urb->actual_length);
 | |
| 
 | |
| 	/* Anyone listening? */
 | |
| 	if (serial->port.count == 0)
 | |
| 		return;
 | |
| 
 | |
| 	if (serial->parent->port_spec & HSO_INFO_CRC_BUG)
 | |
| 		fix_crc_bug(urb, serial->in_endp->wMaxPacketSize);
 | |
| 	/* Valid data, handle RX data */
 | |
| 	spin_lock(&serial->serial_lock);
 | |
| 	serial->rx_urb_filled[hso_urb_to_index(serial, urb)] = 1;
 | |
| 	put_rxbuf_data_and_resubmit_bulk_urb(serial);
 | |
| 	spin_unlock(&serial->serial_lock);
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * This needs to be a tasklet otherwise we will
 | |
|  * end up recursively calling this function.
 | |
|  */
 | |
| static void hso_unthrottle_tasklet(struct hso_serial *serial)
 | |
| {
 | |
| 	unsigned long flags;
 | |
| 
 | |
| 	spin_lock_irqsave(&serial->serial_lock, flags);
 | |
| 	if ((serial->parent->port_spec & HSO_INTF_MUX))
 | |
| 		put_rxbuf_data_and_resubmit_ctrl_urb(serial);
 | |
| 	else
 | |
| 		put_rxbuf_data_and_resubmit_bulk_urb(serial);
 | |
| 	spin_unlock_irqrestore(&serial->serial_lock, flags);
 | |
| }
 | |
| 
 | |
| static	void hso_unthrottle(struct tty_struct *tty)
 | |
| {
 | |
| 	struct hso_serial *serial = tty->driver_data;
 | |
| 
 | |
| 	tasklet_hi_schedule(&serial->unthrottle_tasklet);
 | |
| }
 | |
| 
 | |
| /* open the requested serial port */
 | |
| static int hso_serial_open(struct tty_struct *tty, struct file *filp)
 | |
| {
 | |
| 	struct hso_serial *serial = get_serial_by_index(tty->index);
 | |
| 	int result;
 | |
| 
 | |
| 	/* sanity check */
 | |
| 	if (serial == NULL || serial->magic != HSO_SERIAL_MAGIC) {
 | |
| 		WARN_ON(1);
 | |
| 		tty->driver_data = NULL;
 | |
| 		D1("Failed to open port");
 | |
| 		return -ENODEV;
 | |
| 	}
 | |
| 
 | |
| 	mutex_lock(&serial->parent->mutex);
 | |
| 	result = usb_autopm_get_interface(serial->parent->interface);
 | |
| 	if (result < 0)
 | |
| 		goto err_out;
 | |
| 
 | |
| 	D1("Opening %d", serial->minor);
 | |
| 	kref_get(&serial->parent->ref);
 | |
| 
 | |
| 	/* setup */
 | |
| 	tty->driver_data = serial;
 | |
| 	tty_port_tty_set(&serial->port, tty);
 | |
| 
 | |
| 	/* check for port already opened, if not set the termios */
 | |
| 	serial->port.count++;
 | |
| 	if (serial->port.count == 1) {
 | |
| 		serial->rx_state = RX_IDLE;
 | |
| 		/* Force default termio settings */
 | |
| 		_hso_serial_set_termios(tty, NULL);
 | |
| 		tasklet_init(&serial->unthrottle_tasklet,
 | |
| 			     (void (*)(unsigned long))hso_unthrottle_tasklet,
 | |
| 			     (unsigned long)serial);
 | |
| 		result = hso_start_serial_device(serial->parent, GFP_KERNEL);
 | |
| 		if (result) {
 | |
| 			hso_stop_serial_device(serial->parent);
 | |
| 			serial->port.count--;
 | |
| 			kref_put(&serial->parent->ref, hso_serial_ref_free);
 | |
| 		}
 | |
| 	} else {
 | |
| 		D1("Port was already open");
 | |
| 	}
 | |
| 
 | |
| 	usb_autopm_put_interface(serial->parent->interface);
 | |
| 
 | |
| 	/* done */
 | |
| 	if (result)
 | |
| 		hso_serial_tiocmset(tty, TIOCM_RTS | TIOCM_DTR, 0);
 | |
| err_out:
 | |
| 	mutex_unlock(&serial->parent->mutex);
 | |
| 	return result;
 | |
| }
 | |
| 
 | |
| /* close the requested serial port */
 | |
| static void hso_serial_close(struct tty_struct *tty, struct file *filp)
 | |
| {
 | |
| 	struct hso_serial *serial = tty->driver_data;
 | |
| 	u8 usb_gone;
 | |
| 
 | |
| 	D1("Closing serial port");
 | |
| 
 | |
| 	/* Open failed, no close cleanup required */
 | |
| 	if (serial == NULL)
 | |
| 		return;
 | |
| 
 | |
| 	mutex_lock(&serial->parent->mutex);
 | |
| 	usb_gone = serial->parent->usb_gone;
 | |
| 
 | |
| 	if (!usb_gone)
 | |
| 		usb_autopm_get_interface(serial->parent->interface);
 | |
| 
 | |
| 	/* reset the rts and dtr */
 | |
| 	/* do the actual close */
 | |
| 	serial->port.count--;
 | |
| 
 | |
| 	if (serial->port.count <= 0) {
 | |
| 		serial->port.count = 0;
 | |
| 		tty_port_tty_set(&serial->port, NULL);
 | |
| 		if (!usb_gone)
 | |
| 			hso_stop_serial_device(serial->parent);
 | |
| 		tasklet_kill(&serial->unthrottle_tasklet);
 | |
| 	}
 | |
| 
 | |
| 	if (!usb_gone)
 | |
| 		usb_autopm_put_interface(serial->parent->interface);
 | |
| 
 | |
| 	mutex_unlock(&serial->parent->mutex);
 | |
| 
 | |
| 	kref_put(&serial->parent->ref, hso_serial_ref_free);
 | |
| }
 | |
| 
 | |
| /* close the requested serial port */
 | |
| static int hso_serial_write(struct tty_struct *tty, const unsigned char *buf,
 | |
| 			    int count)
 | |
| {
 | |
| 	struct hso_serial *serial = tty->driver_data;
 | |
| 	int space, tx_bytes;
 | |
| 	unsigned long flags;
 | |
| 
 | |
| 	/* sanity check */
 | |
| 	if (serial == NULL) {
 | |
| 		printk(KERN_ERR "%s: serial is NULL\n", __func__);
 | |
| 		return -ENODEV;
 | |
| 	}
 | |
| 
 | |
| 	spin_lock_irqsave(&serial->serial_lock, flags);
 | |
| 
 | |
| 	space = serial->tx_data_length - serial->tx_buffer_count;
 | |
| 	tx_bytes = (count < space) ? count : space;
 | |
| 
 | |
| 	if (!tx_bytes)
 | |
| 		goto out;
 | |
| 
 | |
| 	memcpy(serial->tx_buffer + serial->tx_buffer_count, buf, tx_bytes);
 | |
| 	serial->tx_buffer_count += tx_bytes;
 | |
| 
 | |
| out:
 | |
| 	spin_unlock_irqrestore(&serial->serial_lock, flags);
 | |
| 
 | |
| 	hso_kick_transmit(serial);
 | |
| 	/* done */
 | |
| 	return tx_bytes;
 | |
| }
 | |
| 
 | |
| /* how much room is there for writing */
 | |
| static int hso_serial_write_room(struct tty_struct *tty)
 | |
| {
 | |
| 	struct hso_serial *serial = tty->driver_data;
 | |
| 	int room;
 | |
| 	unsigned long flags;
 | |
| 
 | |
| 	spin_lock_irqsave(&serial->serial_lock, flags);
 | |
| 	room = serial->tx_data_length - serial->tx_buffer_count;
 | |
| 	spin_unlock_irqrestore(&serial->serial_lock, flags);
 | |
| 
 | |
| 	/* return free room */
 | |
| 	return room;
 | |
| }
 | |
| 
 | |
| /* setup the term */
 | |
| static void hso_serial_set_termios(struct tty_struct *tty, struct ktermios *old)
 | |
| {
 | |
| 	struct hso_serial *serial = tty->driver_data;
 | |
| 	unsigned long flags;
 | |
| 
 | |
| 	if (old)
 | |
| 		D5("Termios called with: cflags new[%d] - old[%d]",
 | |
| 		   tty->termios.c_cflag, old->c_cflag);
 | |
| 
 | |
| 	/* the actual setup */
 | |
| 	spin_lock_irqsave(&serial->serial_lock, flags);
 | |
| 	if (serial->port.count)
 | |
| 		_hso_serial_set_termios(tty, old);
 | |
| 	else
 | |
| 		tty->termios = *old;
 | |
| 	spin_unlock_irqrestore(&serial->serial_lock, flags);
 | |
| 
 | |
| 	/* done */
 | |
| }
 | |
| 
 | |
| /* how many characters in the buffer */
 | |
| static int hso_serial_chars_in_buffer(struct tty_struct *tty)
 | |
| {
 | |
| 	struct hso_serial *serial = tty->driver_data;
 | |
| 	int chars;
 | |
| 	unsigned long flags;
 | |
| 
 | |
| 	/* sanity check */
 | |
| 	if (serial == NULL)
 | |
| 		return 0;
 | |
| 
 | |
| 	spin_lock_irqsave(&serial->serial_lock, flags);
 | |
| 	chars = serial->tx_buffer_count;
 | |
| 	spin_unlock_irqrestore(&serial->serial_lock, flags);
 | |
| 
 | |
| 	return chars;
 | |
| }
 | |
| static int tiocmget_submit_urb(struct hso_serial *serial,
 | |
| 			       struct hso_tiocmget *tiocmget,
 | |
| 			       struct usb_device *usb)
 | |
| {
 | |
| 	int result;
 | |
| 
 | |
| 	if (serial->parent->usb_gone)
 | |
| 		return -ENODEV;
 | |
| 	usb_fill_int_urb(tiocmget->urb, usb,
 | |
| 			 usb_rcvintpipe(usb,
 | |
| 					tiocmget->endp->
 | |
| 					bEndpointAddress & 0x7F),
 | |
| 			 &tiocmget->serial_state_notification,
 | |
| 			 sizeof(struct hso_serial_state_notification),
 | |
| 			 tiocmget_intr_callback, serial,
 | |
| 			 tiocmget->endp->bInterval);
 | |
| 	result = usb_submit_urb(tiocmget->urb, GFP_ATOMIC);
 | |
| 	if (result) {
 | |
| 		dev_warn(&usb->dev, "%s usb_submit_urb failed %d\n", __func__,
 | |
| 			 result);
 | |
| 	}
 | |
| 	return result;
 | |
| 
 | |
| }
 | |
| 
 | |
| static void tiocmget_intr_callback(struct urb *urb)
 | |
| {
 | |
| 	struct hso_serial *serial = urb->context;
 | |
| 	struct hso_tiocmget *tiocmget;
 | |
| 	int status = urb->status;
 | |
| 	u16 UART_state_bitmap, prev_UART_state_bitmap;
 | |
| 	struct uart_icount *icount;
 | |
| 	struct hso_serial_state_notification *serial_state_notification;
 | |
| 	struct usb_device *usb;
 | |
| 	int if_num;
 | |
| 
 | |
| 	/* Sanity checks */
 | |
| 	if (!serial)
 | |
| 		return;
 | |
| 	if (status) {
 | |
| 		handle_usb_error(status, __func__, serial->parent);
 | |
| 		return;
 | |
| 	}
 | |
| 
 | |
| 	/* tiocmget is only supported on HSO_PORT_MODEM */
 | |
| 	tiocmget = serial->tiocmget;
 | |
| 	if (!tiocmget)
 | |
| 		return;
 | |
| 	BUG_ON((serial->parent->port_spec & HSO_PORT_MASK) != HSO_PORT_MODEM);
 | |
| 
 | |
| 	usb = serial->parent->usb;
 | |
| 	if_num = serial->parent->interface->altsetting->desc.bInterfaceNumber;
 | |
| 
 | |
| 	/* wIndex should be the USB interface number of the port to which the
 | |
| 	 * notification applies, which should always be the Modem port.
 | |
| 	 */
 | |
| 	serial_state_notification = &tiocmget->serial_state_notification;
 | |
| 	if (serial_state_notification->bmRequestType != BM_REQUEST_TYPE ||
 | |
| 	    serial_state_notification->bNotification != B_NOTIFICATION ||
 | |
| 	    le16_to_cpu(serial_state_notification->wValue) != W_VALUE ||
 | |
| 	    le16_to_cpu(serial_state_notification->wIndex) != if_num ||
 | |
| 	    le16_to_cpu(serial_state_notification->wLength) != W_LENGTH) {
 | |
| 		dev_warn(&usb->dev,
 | |
| 			 "hso received invalid serial state notification\n");
 | |
| 		DUMP(serial_state_notification,
 | |
| 		     sizeof(struct hso_serial_state_notification));
 | |
| 	} else {
 | |
| 
 | |
| 		UART_state_bitmap = le16_to_cpu(serial_state_notification->
 | |
| 						UART_state_bitmap);
 | |
| 		prev_UART_state_bitmap = tiocmget->prev_UART_state_bitmap;
 | |
| 		icount = &tiocmget->icount;
 | |
| 		spin_lock(&serial->serial_lock);
 | |
| 		if ((UART_state_bitmap & B_OVERRUN) !=
 | |
| 		   (prev_UART_state_bitmap & B_OVERRUN))
 | |
| 			icount->parity++;
 | |
| 		if ((UART_state_bitmap & B_PARITY) !=
 | |
| 		   (prev_UART_state_bitmap & B_PARITY))
 | |
| 			icount->parity++;
 | |
| 		if ((UART_state_bitmap & B_FRAMING) !=
 | |
| 		   (prev_UART_state_bitmap & B_FRAMING))
 | |
| 			icount->frame++;
 | |
| 		if ((UART_state_bitmap & B_RING_SIGNAL) &&
 | |
| 		   !(prev_UART_state_bitmap & B_RING_SIGNAL))
 | |
| 			icount->rng++;
 | |
| 		if ((UART_state_bitmap & B_BREAK) !=
 | |
| 		   (prev_UART_state_bitmap & B_BREAK))
 | |
| 			icount->brk++;
 | |
| 		if ((UART_state_bitmap & B_TX_CARRIER) !=
 | |
| 		   (prev_UART_state_bitmap & B_TX_CARRIER))
 | |
| 			icount->dsr++;
 | |
| 		if ((UART_state_bitmap & B_RX_CARRIER) !=
 | |
| 		   (prev_UART_state_bitmap & B_RX_CARRIER))
 | |
| 			icount->dcd++;
 | |
| 		tiocmget->prev_UART_state_bitmap = UART_state_bitmap;
 | |
| 		spin_unlock(&serial->serial_lock);
 | |
| 		tiocmget->intr_completed = 1;
 | |
| 		wake_up_interruptible(&tiocmget->waitq);
 | |
| 	}
 | |
| 	memset(serial_state_notification, 0,
 | |
| 	       sizeof(struct hso_serial_state_notification));
 | |
| 	tiocmget_submit_urb(serial,
 | |
| 			    tiocmget,
 | |
| 			    serial->parent->usb);
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * next few functions largely stolen from drivers/serial/serial_core.c
 | |
|  */
 | |
| /* Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change
 | |
|  * - mask passed in arg for lines of interest
 | |
|  *   (use |'ed TIOCM_RNG/DSR/CD/CTS for masking)
 | |
|  * Caller should use TIOCGICOUNT to see which one it was
 | |
|  */
 | |
| static int
 | |
| hso_wait_modem_status(struct hso_serial *serial, unsigned long arg)
 | |
| {
 | |
| 	DECLARE_WAITQUEUE(wait, current);
 | |
| 	struct uart_icount cprev, cnow;
 | |
| 	struct hso_tiocmget  *tiocmget;
 | |
| 	int ret;
 | |
| 
 | |
| 	tiocmget = serial->tiocmget;
 | |
| 	if (!tiocmget)
 | |
| 		return -ENOENT;
 | |
| 	/*
 | |
| 	 * note the counters on entry
 | |
| 	 */
 | |
| 	spin_lock_irq(&serial->serial_lock);
 | |
| 	memcpy(&cprev, &tiocmget->icount, sizeof(struct uart_icount));
 | |
| 	spin_unlock_irq(&serial->serial_lock);
 | |
| 	add_wait_queue(&tiocmget->waitq, &wait);
 | |
| 	for (;;) {
 | |
| 		spin_lock_irq(&serial->serial_lock);
 | |
| 		memcpy(&cnow, &tiocmget->icount, sizeof(struct uart_icount));
 | |
| 		spin_unlock_irq(&serial->serial_lock);
 | |
| 		set_current_state(TASK_INTERRUPTIBLE);
 | |
| 		if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) ||
 | |
| 		    ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) ||
 | |
| 		    ((arg & TIOCM_CD)  && (cnow.dcd != cprev.dcd))) {
 | |
| 			ret = 0;
 | |
| 			break;
 | |
| 		}
 | |
| 		schedule();
 | |
| 		/* see if a signal did it */
 | |
| 		if (signal_pending(current)) {
 | |
| 			ret = -ERESTARTSYS;
 | |
| 			break;
 | |
| 		}
 | |
| 		cprev = cnow;
 | |
| 	}
 | |
| 	current->state = TASK_RUNNING;
 | |
| 	remove_wait_queue(&tiocmget->waitq, &wait);
 | |
| 
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
 | |
|  * Return: write counters to the user passed counter struct
 | |
|  * NB: both 1->0 and 0->1 transitions are counted except for
 | |
|  *     RI where only 0->1 is counted.
 | |
|  */
 | |
| static int hso_get_count(struct tty_struct *tty,
 | |
| 		  struct serial_icounter_struct *icount)
 | |
| {
 | |
| 	struct uart_icount cnow;
 | |
| 	struct hso_serial *serial = tty->driver_data;
 | |
| 	struct hso_tiocmget  *tiocmget = serial->tiocmget;
 | |
| 
 | |
| 	memset(icount, 0, sizeof(struct serial_icounter_struct));
 | |
| 
 | |
| 	if (!tiocmget)
 | |
| 		 return -ENOENT;
 | |
| 	spin_lock_irq(&serial->serial_lock);
 | |
| 	memcpy(&cnow, &tiocmget->icount, sizeof(struct uart_icount));
 | |
| 	spin_unlock_irq(&serial->serial_lock);
 | |
| 
 | |
| 	icount->cts         = cnow.cts;
 | |
| 	icount->dsr         = cnow.dsr;
 | |
| 	icount->rng         = cnow.rng;
 | |
| 	icount->dcd         = cnow.dcd;
 | |
| 	icount->rx          = cnow.rx;
 | |
| 	icount->tx          = cnow.tx;
 | |
| 	icount->frame       = cnow.frame;
 | |
| 	icount->overrun     = cnow.overrun;
 | |
| 	icount->parity      = cnow.parity;
 | |
| 	icount->brk         = cnow.brk;
 | |
| 	icount->buf_overrun = cnow.buf_overrun;
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| 
 | |
| static int hso_serial_tiocmget(struct tty_struct *tty)
 | |
| {
 | |
| 	int retval;
 | |
| 	struct hso_serial *serial = tty->driver_data;
 | |
| 	struct hso_tiocmget  *tiocmget;
 | |
| 	u16 UART_state_bitmap;
 | |
| 
 | |
| 	/* sanity check */
 | |
| 	if (!serial) {
 | |
| 		D1("no tty structures");
 | |
| 		return -EINVAL;
 | |
| 	}
 | |
| 	spin_lock_irq(&serial->serial_lock);
 | |
| 	retval = ((serial->rts_state) ? TIOCM_RTS : 0) |
 | |
| 	    ((serial->dtr_state) ? TIOCM_DTR : 0);
 | |
| 	tiocmget = serial->tiocmget;
 | |
| 	if (tiocmget) {
 | |
| 
 | |
| 		UART_state_bitmap = le16_to_cpu(
 | |
| 			tiocmget->prev_UART_state_bitmap);
 | |
| 		if (UART_state_bitmap & B_RING_SIGNAL)
 | |
| 			retval |=  TIOCM_RNG;
 | |
| 		if (UART_state_bitmap & B_RX_CARRIER)
 | |
| 			retval |=  TIOCM_CD;
 | |
| 		if (UART_state_bitmap & B_TX_CARRIER)
 | |
| 			retval |=  TIOCM_DSR;
 | |
| 	}
 | |
| 	spin_unlock_irq(&serial->serial_lock);
 | |
| 	return retval;
 | |
| }
 | |
| 
 | |
| static int hso_serial_tiocmset(struct tty_struct *tty,
 | |
| 			       unsigned int set, unsigned int clear)
 | |
| {
 | |
| 	int val = 0;
 | |
| 	unsigned long flags;
 | |
| 	int if_num;
 | |
| 	struct hso_serial *serial = tty->driver_data;
 | |
| 
 | |
| 	/* sanity check */
 | |
| 	if (!serial) {
 | |
| 		D1("no tty structures");
 | |
| 		return -EINVAL;
 | |
| 	}
 | |
| 
 | |
| 	if ((serial->parent->port_spec & HSO_PORT_MASK) != HSO_PORT_MODEM)
 | |
| 		return -EINVAL;
 | |
| 
 | |
| 	if_num = serial->parent->interface->altsetting->desc.bInterfaceNumber;
 | |
| 
 | |
| 	spin_lock_irqsave(&serial->serial_lock, flags);
 | |
| 	if (set & TIOCM_RTS)
 | |
| 		serial->rts_state = 1;
 | |
| 	if (set & TIOCM_DTR)
 | |
| 		serial->dtr_state = 1;
 | |
| 
 | |
| 	if (clear & TIOCM_RTS)
 | |
| 		serial->rts_state = 0;
 | |
| 	if (clear & TIOCM_DTR)
 | |
| 		serial->dtr_state = 0;
 | |
| 
 | |
| 	if (serial->dtr_state)
 | |
| 		val |= 0x01;
 | |
| 	if (serial->rts_state)
 | |
| 		val |= 0x02;
 | |
| 
 | |
| 	spin_unlock_irqrestore(&serial->serial_lock, flags);
 | |
| 
 | |
| 	return usb_control_msg(serial->parent->usb,
 | |
| 			       usb_rcvctrlpipe(serial->parent->usb, 0), 0x22,
 | |
| 			       0x21, val, if_num, NULL, 0,
 | |
| 			       USB_CTRL_SET_TIMEOUT);
 | |
| }
 | |
| 
 | |
| static int hso_serial_ioctl(struct tty_struct *tty,
 | |
| 			    unsigned int cmd, unsigned long arg)
 | |
| {
 | |
| 	struct hso_serial *serial = tty->driver_data;
 | |
| 	int ret = 0;
 | |
| 	D4("IOCTL cmd: %d, arg: %ld", cmd, arg);
 | |
| 
 | |
| 	if (!serial)
 | |
| 		return -ENODEV;
 | |
| 	switch (cmd) {
 | |
| 	case TIOCMIWAIT:
 | |
| 		ret = hso_wait_modem_status(serial, arg);
 | |
| 		break;
 | |
| 	default:
 | |
| 		ret = -ENOIOCTLCMD;
 | |
| 		break;
 | |
| 	}
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| 
 | |
| /* starts a transmit */
 | |
| static void hso_kick_transmit(struct hso_serial *serial)
 | |
| {
 | |
| 	u8 *temp;
 | |
| 	unsigned long flags;
 | |
| 	int res;
 | |
| 
 | |
| 	spin_lock_irqsave(&serial->serial_lock, flags);
 | |
| 	if (!serial->tx_buffer_count)
 | |
| 		goto out;
 | |
| 
 | |
| 	if (serial->tx_urb_used)
 | |
| 		goto out;
 | |
| 
 | |
| 	/* Wakeup USB interface if necessary */
 | |
| 	if (hso_get_activity(serial->parent) == -EAGAIN)
 | |
| 		goto out;
 | |
| 
 | |
| 	/* Switch pointers around to avoid memcpy */
 | |
| 	temp = serial->tx_buffer;
 | |
| 	serial->tx_buffer = serial->tx_data;
 | |
| 	serial->tx_data = temp;
 | |
| 	serial->tx_data_count = serial->tx_buffer_count;
 | |
| 	serial->tx_buffer_count = 0;
 | |
| 
 | |
| 	/* If temp is set, it means we switched buffers */
 | |
| 	if (temp && serial->write_data) {
 | |
| 		res = serial->write_data(serial);
 | |
| 		if (res >= 0)
 | |
| 			serial->tx_urb_used = 1;
 | |
| 	}
 | |
| out:
 | |
| 	spin_unlock_irqrestore(&serial->serial_lock, flags);
 | |
| }
 | |
| 
 | |
| /* make a request (for reading and writing data to muxed serial port) */
 | |
| static int mux_device_request(struct hso_serial *serial, u8 type, u16 port,
 | |
| 			      struct urb *ctrl_urb,
 | |
| 			      struct usb_ctrlrequest *ctrl_req,
 | |
| 			      u8 *ctrl_urb_data, u32 size)
 | |
| {
 | |
| 	int result;
 | |
| 	int pipe;
 | |
| 
 | |
| 	/* Sanity check */
 | |
| 	if (!serial || !ctrl_urb || !ctrl_req) {
 | |
| 		printk(KERN_ERR "%s: Wrong arguments\n", __func__);
 | |
| 		return -EINVAL;
 | |
| 	}
 | |
| 
 | |
| 	/* initialize */
 | |
| 	ctrl_req->wValue = 0;
 | |
| 	ctrl_req->wIndex = cpu_to_le16(hso_port_to_mux(port));
 | |
| 	ctrl_req->wLength = cpu_to_le16(size);
 | |
| 
 | |
| 	if (type == USB_CDC_GET_ENCAPSULATED_RESPONSE) {
 | |
| 		/* Reading command */
 | |
| 		ctrl_req->bRequestType = USB_DIR_IN |
 | |
| 					 USB_TYPE_OPTION_VENDOR |
 | |
| 					 USB_RECIP_INTERFACE;
 | |
| 		ctrl_req->bRequest = USB_CDC_GET_ENCAPSULATED_RESPONSE;
 | |
| 		pipe = usb_rcvctrlpipe(serial->parent->usb, 0);
 | |
| 	} else {
 | |
| 		/* Writing command */
 | |
| 		ctrl_req->bRequestType = USB_DIR_OUT |
 | |
| 					 USB_TYPE_OPTION_VENDOR |
 | |
| 					 USB_RECIP_INTERFACE;
 | |
| 		ctrl_req->bRequest = USB_CDC_SEND_ENCAPSULATED_COMMAND;
 | |
| 		pipe = usb_sndctrlpipe(serial->parent->usb, 0);
 | |
| 	}
 | |
| 	/* syslog */
 | |
| 	D2("%s command (%02x) len: %d, port: %d",
 | |
| 	   type == USB_CDC_GET_ENCAPSULATED_RESPONSE ? "Read" : "Write",
 | |
| 	   ctrl_req->bRequestType, ctrl_req->wLength, port);
 | |
| 
 | |
| 	/* Load ctrl urb */
 | |
| 	ctrl_urb->transfer_flags = 0;
 | |
| 	usb_fill_control_urb(ctrl_urb,
 | |
| 			     serial->parent->usb,
 | |
| 			     pipe,
 | |
| 			     (u8 *) ctrl_req,
 | |
| 			     ctrl_urb_data, size, ctrl_callback, serial);
 | |
| 	/* Send it on merry way */
 | |
| 	result = usb_submit_urb(ctrl_urb, GFP_ATOMIC);
 | |
| 	if (result) {
 | |
| 		dev_err(&ctrl_urb->dev->dev,
 | |
| 			"%s failed submit ctrl_urb %d type %d\n", __func__,
 | |
| 			result, type);
 | |
| 		return result;
 | |
| 	}
 | |
| 
 | |
| 	/* done */
 | |
| 	return size;
 | |
| }
 | |
| 
 | |
| /* called by intr_callback when read occurs */
 | |
| static int hso_mux_serial_read(struct hso_serial *serial)
 | |
| {
 | |
| 	if (!serial)
 | |
| 		return -EINVAL;
 | |
| 
 | |
| 	/* clean data */
 | |
| 	memset(serial->rx_data[0], 0, CTRL_URB_RX_SIZE);
 | |
| 	/* make the request */
 | |
| 
 | |
| 	if (serial->num_rx_urbs != 1) {
 | |
| 		dev_err(&serial->parent->interface->dev,
 | |
| 			"ERROR: mux'd reads with multiple buffers "
 | |
| 			"not possible\n");
 | |
| 		return 0;
 | |
| 	}
 | |
| 	return mux_device_request(serial,
 | |
| 				  USB_CDC_GET_ENCAPSULATED_RESPONSE,
 | |
| 				  serial->parent->port_spec & HSO_PORT_MASK,
 | |
| 				  serial->rx_urb[0],
 | |
| 				  &serial->ctrl_req_rx,
 | |
| 				  serial->rx_data[0], serial->rx_data_length);
 | |
| }
 | |
| 
 | |
| /* used for muxed serial port callback (muxed serial read) */
 | |
| static void intr_callback(struct urb *urb)
 | |
| {
 | |
| 	struct hso_shared_int *shared_int = urb->context;
 | |
| 	struct hso_serial *serial;
 | |
| 	unsigned char *port_req;
 | |
| 	int status = urb->status;
 | |
| 	int i;
 | |
| 
 | |
| 	usb_mark_last_busy(urb->dev);
 | |
| 
 | |
| 	/* sanity check */
 | |
| 	if (!shared_int)
 | |
| 		return;
 | |
| 
 | |
| 	/* status check */
 | |
| 	if (status) {
 | |
| 		handle_usb_error(status, __func__, NULL);
 | |
| 		return;
 | |
| 	}
 | |
| 	D4("\n--- Got intr callback 0x%02X ---", status);
 | |
| 
 | |
| 	/* what request? */
 | |
| 	port_req = urb->transfer_buffer;
 | |
| 	D4(" port_req = 0x%.2X\n", *port_req);
 | |
| 	/* loop over all muxed ports to find the one sending this */
 | |
| 	for (i = 0; i < 8; i++) {
 | |
| 		/* max 8 channels on MUX */
 | |
| 		if (*port_req & (1 << i)) {
 | |
| 			serial = get_serial_by_shared_int_and_type(shared_int,
 | |
| 								   (1 << i));
 | |
| 			if (serial != NULL) {
 | |
| 				D1("Pending read interrupt on port %d\n", i);
 | |
| 				spin_lock(&serial->serial_lock);
 | |
| 				if (serial->rx_state == RX_IDLE &&
 | |
| 					serial->port.count > 0) {
 | |
| 					/* Setup and send a ctrl req read on
 | |
| 					 * port i */
 | |
| 					if (!serial->rx_urb_filled[0]) {
 | |
| 						serial->rx_state = RX_SENT;
 | |
| 						hso_mux_serial_read(serial);
 | |
| 					} else
 | |
| 						serial->rx_state = RX_PENDING;
 | |
| 				} else {
 | |
| 					D1("Already a read pending on "
 | |
| 					   "port %d or port not open\n", i);
 | |
| 				}
 | |
| 				spin_unlock(&serial->serial_lock);
 | |
| 			}
 | |
| 		}
 | |
| 	}
 | |
| 	/* Resubmit interrupt urb */
 | |
| 	hso_mux_submit_intr_urb(shared_int, urb->dev, GFP_ATOMIC);
 | |
| }
 | |
| 
 | |
| /* called for writing to muxed serial port */
 | |
| static int hso_mux_serial_write_data(struct hso_serial *serial)
 | |
| {
 | |
| 	if (NULL == serial)
 | |
| 		return -EINVAL;
 | |
| 
 | |
| 	return mux_device_request(serial,
 | |
| 				  USB_CDC_SEND_ENCAPSULATED_COMMAND,
 | |
| 				  serial->parent->port_spec & HSO_PORT_MASK,
 | |
| 				  serial->tx_urb,
 | |
| 				  &serial->ctrl_req_tx,
 | |
| 				  serial->tx_data, serial->tx_data_count);
 | |
| }
 | |
| 
 | |
| /* write callback for Diag and CS port */
 | |
| static void hso_std_serial_write_bulk_callback(struct urb *urb)
 | |
| {
 | |
| 	struct hso_serial *serial = urb->context;
 | |
| 	int status = urb->status;
 | |
| 
 | |
| 	/* sanity check */
 | |
| 	if (!serial) {
 | |
| 		D1("serial == NULL");
 | |
| 		return;
 | |
| 	}
 | |
| 
 | |
| 	spin_lock(&serial->serial_lock);
 | |
| 	serial->tx_urb_used = 0;
 | |
| 	spin_unlock(&serial->serial_lock);
 | |
| 	if (status) {
 | |
| 		handle_usb_error(status, __func__, serial->parent);
 | |
| 		return;
 | |
| 	}
 | |
| 	hso_put_activity(serial->parent);
 | |
| 	tty_port_tty_wakeup(&serial->port);
 | |
| 	hso_kick_transmit(serial);
 | |
| 
 | |
| 	D1(" ");
 | |
| }
 | |
| 
 | |
| /* called for writing diag or CS serial port */
 | |
| static int hso_std_serial_write_data(struct hso_serial *serial)
 | |
| {
 | |
| 	int count = serial->tx_data_count;
 | |
| 	int result;
 | |
| 
 | |
| 	usb_fill_bulk_urb(serial->tx_urb,
 | |
| 			  serial->parent->usb,
 | |
| 			  usb_sndbulkpipe(serial->parent->usb,
 | |
| 					  serial->out_endp->
 | |
| 					  bEndpointAddress & 0x7F),
 | |
| 			  serial->tx_data, serial->tx_data_count,
 | |
| 			  hso_std_serial_write_bulk_callback, serial);
 | |
| 
 | |
| 	result = usb_submit_urb(serial->tx_urb, GFP_ATOMIC);
 | |
| 	if (result) {
 | |
| 		dev_warn(&serial->parent->usb->dev,
 | |
| 			 "Failed to submit urb - res %d\n", result);
 | |
| 		return result;
 | |
| 	}
 | |
| 
 | |
| 	return count;
 | |
| }
 | |
| 
 | |
| /* callback after read or write on muxed serial port */
 | |
| static void ctrl_callback(struct urb *urb)
 | |
| {
 | |
| 	struct hso_serial *serial = urb->context;
 | |
| 	struct usb_ctrlrequest *req;
 | |
| 	int status = urb->status;
 | |
| 
 | |
| 	/* sanity check */
 | |
| 	if (!serial)
 | |
| 		return;
 | |
| 
 | |
| 	spin_lock(&serial->serial_lock);
 | |
| 	serial->tx_urb_used = 0;
 | |
| 	spin_unlock(&serial->serial_lock);
 | |
| 	if (status) {
 | |
| 		handle_usb_error(status, __func__, serial->parent);
 | |
| 		return;
 | |
| 	}
 | |
| 
 | |
| 	/* what request? */
 | |
| 	req = (struct usb_ctrlrequest *)(urb->setup_packet);
 | |
| 	D4("\n--- Got muxed ctrl callback 0x%02X ---", status);
 | |
| 	D4("Actual length of urb = %d\n", urb->actual_length);
 | |
| 	DUMP1(urb->transfer_buffer, urb->actual_length);
 | |
| 
 | |
| 	if (req->bRequestType ==
 | |
| 	    (USB_DIR_IN | USB_TYPE_OPTION_VENDOR | USB_RECIP_INTERFACE)) {
 | |
| 		/* response to a read command */
 | |
| 		serial->rx_urb_filled[0] = 1;
 | |
| 		spin_lock(&serial->serial_lock);
 | |
| 		put_rxbuf_data_and_resubmit_ctrl_urb(serial);
 | |
| 		spin_unlock(&serial->serial_lock);
 | |
| 	} else {
 | |
| 		hso_put_activity(serial->parent);
 | |
| 		tty_port_tty_wakeup(&serial->port);
 | |
| 		/* response to a write command */
 | |
| 		hso_kick_transmit(serial);
 | |
| 	}
 | |
| }
 | |
| 
 | |
| /* handle RX data for serial port */
 | |
| static int put_rxbuf_data(struct urb *urb, struct hso_serial *serial)
 | |
| {
 | |
| 	struct tty_struct *tty;
 | |
| 	int count;
 | |
| 
 | |
| 	/* Sanity check */
 | |
| 	if (urb == NULL || serial == NULL) {
 | |
| 		D1("serial = NULL");
 | |
| 		return -2;
 | |
| 	}
 | |
| 
 | |
| 	tty = tty_port_tty_get(&serial->port);
 | |
| 
 | |
| 	if (tty && test_bit(TTY_THROTTLED, &tty->flags)) {
 | |
| 		tty_kref_put(tty);
 | |
| 		return -1;
 | |
| 	}
 | |
| 
 | |
| 	/* Push data to tty */
 | |
| 	D1("data to push to tty");
 | |
| 	count = tty_buffer_request_room(&serial->port, urb->actual_length);
 | |
| 	if (count >= urb->actual_length) {
 | |
| 		tty_insert_flip_string(&serial->port, urb->transfer_buffer,
 | |
| 				       urb->actual_length);
 | |
| 		tty_flip_buffer_push(&serial->port);
 | |
| 	} else {
 | |
| 		dev_warn(&serial->parent->usb->dev,
 | |
| 			 "dropping data, %d bytes lost\n", urb->actual_length);
 | |
| 	}
 | |
| 
 | |
| 	tty_kref_put(tty);
 | |
| 
 | |
| 	serial->rx_urb_filled[hso_urb_to_index(serial, urb)] = 0;
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| 
 | |
| /* Base driver functions */
 | |
| 
 | |
| static void hso_log_port(struct hso_device *hso_dev)
 | |
| {
 | |
| 	char *port_type;
 | |
| 	char port_dev[20];
 | |
| 
 | |
| 	switch (hso_dev->port_spec & HSO_PORT_MASK) {
 | |
| 	case HSO_PORT_CONTROL:
 | |
| 		port_type = "Control";
 | |
| 		break;
 | |
| 	case HSO_PORT_APP:
 | |
| 		port_type = "Application";
 | |
| 		break;
 | |
| 	case HSO_PORT_GPS:
 | |
| 		port_type = "GPS";
 | |
| 		break;
 | |
| 	case HSO_PORT_GPS_CONTROL:
 | |
| 		port_type = "GPS control";
 | |
| 		break;
 | |
| 	case HSO_PORT_APP2:
 | |
| 		port_type = "Application2";
 | |
| 		break;
 | |
| 	case HSO_PORT_PCSC:
 | |
| 		port_type = "PCSC";
 | |
| 		break;
 | |
| 	case HSO_PORT_DIAG:
 | |
| 		port_type = "Diagnostic";
 | |
| 		break;
 | |
| 	case HSO_PORT_DIAG2:
 | |
| 		port_type = "Diagnostic2";
 | |
| 		break;
 | |
| 	case HSO_PORT_MODEM:
 | |
| 		port_type = "Modem";
 | |
| 		break;
 | |
| 	case HSO_PORT_NETWORK:
 | |
| 		port_type = "Network";
 | |
| 		break;
 | |
| 	default:
 | |
| 		port_type = "Unknown";
 | |
| 		break;
 | |
| 	}
 | |
| 	if ((hso_dev->port_spec & HSO_PORT_MASK) == HSO_PORT_NETWORK) {
 | |
| 		sprintf(port_dev, "%s", dev2net(hso_dev)->net->name);
 | |
| 	} else
 | |
| 		sprintf(port_dev, "/dev/%s%d", tty_filename,
 | |
| 			dev2ser(hso_dev)->minor);
 | |
| 
 | |
| 	dev_dbg(&hso_dev->interface->dev, "HSO: Found %s port %s\n",
 | |
| 		port_type, port_dev);
 | |
| }
 | |
| 
 | |
| static int hso_start_net_device(struct hso_device *hso_dev)
 | |
| {
 | |
| 	int i, result = 0;
 | |
| 	struct hso_net *hso_net = dev2net(hso_dev);
 | |
| 
 | |
| 	if (!hso_net)
 | |
| 		return -ENODEV;
 | |
| 
 | |
| 	/* send URBs for all read buffers */
 | |
| 	for (i = 0; i < MUX_BULK_RX_BUF_COUNT; i++) {
 | |
| 
 | |
| 		/* Prep a receive URB */
 | |
| 		usb_fill_bulk_urb(hso_net->mux_bulk_rx_urb_pool[i],
 | |
| 				  hso_dev->usb,
 | |
| 				  usb_rcvbulkpipe(hso_dev->usb,
 | |
| 						  hso_net->in_endp->
 | |
| 						  bEndpointAddress & 0x7F),
 | |
| 				  hso_net->mux_bulk_rx_buf_pool[i],
 | |
| 				  MUX_BULK_RX_BUF_SIZE, read_bulk_callback,
 | |
| 				  hso_net);
 | |
| 
 | |
| 		/* Put it out there so the device can send us stuff */
 | |
| 		result = usb_submit_urb(hso_net->mux_bulk_rx_urb_pool[i],
 | |
| 					GFP_NOIO);
 | |
| 		if (result)
 | |
| 			dev_warn(&hso_dev->usb->dev,
 | |
| 				"%s failed mux_bulk_rx_urb[%d] %d\n", __func__,
 | |
| 				i, result);
 | |
| 	}
 | |
| 
 | |
| 	return result;
 | |
| }
 | |
| 
 | |
| static int hso_stop_net_device(struct hso_device *hso_dev)
 | |
| {
 | |
| 	int i;
 | |
| 	struct hso_net *hso_net = dev2net(hso_dev);
 | |
| 
 | |
| 	if (!hso_net)
 | |
| 		return -ENODEV;
 | |
| 
 | |
| 	for (i = 0; i < MUX_BULK_RX_BUF_COUNT; i++) {
 | |
| 		if (hso_net->mux_bulk_rx_urb_pool[i])
 | |
| 			usb_kill_urb(hso_net->mux_bulk_rx_urb_pool[i]);
 | |
| 
 | |
| 	}
 | |
| 	if (hso_net->mux_bulk_tx_urb)
 | |
| 		usb_kill_urb(hso_net->mux_bulk_tx_urb);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int hso_start_serial_device(struct hso_device *hso_dev, gfp_t flags)
 | |
| {
 | |
| 	int i, result = 0;
 | |
| 	struct hso_serial *serial = dev2ser(hso_dev);
 | |
| 
 | |
| 	if (!serial)
 | |
| 		return -ENODEV;
 | |
| 
 | |
| 	/* If it is not the MUX port fill in and submit a bulk urb (already
 | |
| 	 * allocated in hso_serial_start) */
 | |
| 	if (!(serial->parent->port_spec & HSO_INTF_MUX)) {
 | |
| 		for (i = 0; i < serial->num_rx_urbs; i++) {
 | |
| 			usb_fill_bulk_urb(serial->rx_urb[i],
 | |
| 					  serial->parent->usb,
 | |
| 					  usb_rcvbulkpipe(serial->parent->usb,
 | |
| 							  serial->in_endp->
 | |
| 							  bEndpointAddress &
 | |
| 							  0x7F),
 | |
| 					  serial->rx_data[i],
 | |
| 					  serial->rx_data_length,
 | |
| 					  hso_std_serial_read_bulk_callback,
 | |
| 					  serial);
 | |
| 			result = usb_submit_urb(serial->rx_urb[i], flags);
 | |
| 			if (result) {
 | |
| 				dev_warn(&serial->parent->usb->dev,
 | |
| 					 "Failed to submit urb - res %d\n",
 | |
| 					 result);
 | |
| 				break;
 | |
| 			}
 | |
| 		}
 | |
| 	} else {
 | |
| 		mutex_lock(&serial->shared_int->shared_int_lock);
 | |
| 		if (!serial->shared_int->use_count) {
 | |
| 			result =
 | |
| 			    hso_mux_submit_intr_urb(serial->shared_int,
 | |
| 						    hso_dev->usb, flags);
 | |
| 		}
 | |
| 		serial->shared_int->use_count++;
 | |
| 		mutex_unlock(&serial->shared_int->shared_int_lock);
 | |
| 	}
 | |
| 	if (serial->tiocmget)
 | |
| 		tiocmget_submit_urb(serial,
 | |
| 				    serial->tiocmget,
 | |
| 				    serial->parent->usb);
 | |
| 	return result;
 | |
| }
 | |
| 
 | |
| static int hso_stop_serial_device(struct hso_device *hso_dev)
 | |
| {
 | |
| 	int i;
 | |
| 	struct hso_serial *serial = dev2ser(hso_dev);
 | |
| 	struct hso_tiocmget  *tiocmget;
 | |
| 
 | |
| 	if (!serial)
 | |
| 		return -ENODEV;
 | |
| 
 | |
| 	for (i = 0; i < serial->num_rx_urbs; i++) {
 | |
| 		if (serial->rx_urb[i]) {
 | |
| 				usb_kill_urb(serial->rx_urb[i]);
 | |
| 				serial->rx_urb_filled[i] = 0;
 | |
| 		}
 | |
| 	}
 | |
| 	serial->curr_rx_urb_idx = 0;
 | |
| 
 | |
| 	if (serial->tx_urb)
 | |
| 		usb_kill_urb(serial->tx_urb);
 | |
| 
 | |
| 	if (serial->shared_int) {
 | |
| 		mutex_lock(&serial->shared_int->shared_int_lock);
 | |
| 		if (serial->shared_int->use_count &&
 | |
| 		    (--serial->shared_int->use_count == 0)) {
 | |
| 			struct urb *urb;
 | |
| 
 | |
| 			urb = serial->shared_int->shared_intr_urb;
 | |
| 			if (urb)
 | |
| 				usb_kill_urb(urb);
 | |
| 		}
 | |
| 		mutex_unlock(&serial->shared_int->shared_int_lock);
 | |
| 	}
 | |
| 	tiocmget = serial->tiocmget;
 | |
| 	if (tiocmget) {
 | |
| 		wake_up_interruptible(&tiocmget->waitq);
 | |
| 		usb_kill_urb(tiocmget->urb);
 | |
| 	}
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static void hso_serial_common_free(struct hso_serial *serial)
 | |
| {
 | |
| 	int i;
 | |
| 
 | |
| 	if (serial->parent->dev)
 | |
| 		device_remove_file(serial->parent->dev, &dev_attr_hsotype);
 | |
| 
 | |
| 	tty_unregister_device(tty_drv, serial->minor);
 | |
| 
 | |
| 	for (i = 0; i < serial->num_rx_urbs; i++) {
 | |
| 		/* unlink and free RX URB */
 | |
| 		usb_free_urb(serial->rx_urb[i]);
 | |
| 		/* free the RX buffer */
 | |
| 		kfree(serial->rx_data[i]);
 | |
| 	}
 | |
| 
 | |
| 	/* unlink and free TX URB */
 | |
| 	usb_free_urb(serial->tx_urb);
 | |
| 	kfree(serial->tx_data);
 | |
| 	tty_port_destroy(&serial->port);
 | |
| }
 | |
| 
 | |
| static int hso_serial_common_create(struct hso_serial *serial, int num_urbs,
 | |
| 				    int rx_size, int tx_size)
 | |
| {
 | |
| 	struct device *dev;
 | |
| 	int minor;
 | |
| 	int i;
 | |
| 
 | |
| 	tty_port_init(&serial->port);
 | |
| 
 | |
| 	minor = get_free_serial_index();
 | |
| 	if (minor < 0)
 | |
| 		goto exit;
 | |
| 
 | |
| 	/* register our minor number */
 | |
| 	serial->parent->dev = tty_port_register_device(&serial->port, tty_drv,
 | |
| 			minor, &serial->parent->interface->dev);
 | |
| 	dev = serial->parent->dev;
 | |
| 	dev_set_drvdata(dev, serial->parent);
 | |
| 	i = device_create_file(dev, &dev_attr_hsotype);
 | |
| 
 | |
| 	/* fill in specific data for later use */
 | |
| 	serial->minor = minor;
 | |
| 	serial->magic = HSO_SERIAL_MAGIC;
 | |
| 	spin_lock_init(&serial->serial_lock);
 | |
| 	serial->num_rx_urbs = num_urbs;
 | |
| 
 | |
| 	/* RX, allocate urb and initialize */
 | |
| 
 | |
| 	/* prepare our RX buffer */
 | |
| 	serial->rx_data_length = rx_size;
 | |
| 	for (i = 0; i < serial->num_rx_urbs; i++) {
 | |
| 		serial->rx_urb[i] = usb_alloc_urb(0, GFP_KERNEL);
 | |
| 		if (!serial->rx_urb[i]) {
 | |
| 			dev_err(dev, "Could not allocate urb?\n");
 | |
| 			goto exit;
 | |
| 		}
 | |
| 		serial->rx_urb[i]->transfer_buffer = NULL;
 | |
| 		serial->rx_urb[i]->transfer_buffer_length = 0;
 | |
| 		serial->rx_data[i] = kzalloc(serial->rx_data_length,
 | |
| 					     GFP_KERNEL);
 | |
| 		if (!serial->rx_data[i])
 | |
| 			goto exit;
 | |
| 	}
 | |
| 
 | |
| 	/* TX, allocate urb and initialize */
 | |
| 	serial->tx_urb = usb_alloc_urb(0, GFP_KERNEL);
 | |
| 	if (!serial->tx_urb) {
 | |
| 		dev_err(dev, "Could not allocate urb?\n");
 | |
| 		goto exit;
 | |
| 	}
 | |
| 	serial->tx_urb->transfer_buffer = NULL;
 | |
| 	serial->tx_urb->transfer_buffer_length = 0;
 | |
| 	/* prepare our TX buffer */
 | |
| 	serial->tx_data_count = 0;
 | |
| 	serial->tx_buffer_count = 0;
 | |
| 	serial->tx_data_length = tx_size;
 | |
| 	serial->tx_data = kzalloc(serial->tx_data_length, GFP_KERNEL);
 | |
| 	if (!serial->tx_data)
 | |
| 		goto exit;
 | |
| 
 | |
| 	serial->tx_buffer = kzalloc(serial->tx_data_length, GFP_KERNEL);
 | |
| 	if (!serial->tx_buffer)
 | |
| 		goto exit;
 | |
| 
 | |
| 	return 0;
 | |
| exit:
 | |
| 	hso_serial_common_free(serial);
 | |
| 	return -1;
 | |
| }
 | |
| 
 | |
| /* Creates a general hso device */
 | |
| static struct hso_device *hso_create_device(struct usb_interface *intf,
 | |
| 					    int port_spec)
 | |
| {
 | |
| 	struct hso_device *hso_dev;
 | |
| 
 | |
| 	hso_dev = kzalloc(sizeof(*hso_dev), GFP_ATOMIC);
 | |
| 	if (!hso_dev)
 | |
| 		return NULL;
 | |
| 
 | |
| 	hso_dev->port_spec = port_spec;
 | |
| 	hso_dev->usb = interface_to_usbdev(intf);
 | |
| 	hso_dev->interface = intf;
 | |
| 	kref_init(&hso_dev->ref);
 | |
| 	mutex_init(&hso_dev->mutex);
 | |
| 
 | |
| 	INIT_WORK(&hso_dev->async_get_intf, async_get_intf);
 | |
| 	INIT_WORK(&hso_dev->async_put_intf, async_put_intf);
 | |
| 	INIT_WORK(&hso_dev->reset_device, reset_device);
 | |
| 
 | |
| 	return hso_dev;
 | |
| }
 | |
| 
 | |
| /* Removes a network device in the network device table */
 | |
| static int remove_net_device(struct hso_device *hso_dev)
 | |
| {
 | |
| 	int i;
 | |
| 
 | |
| 	for (i = 0; i < HSO_MAX_NET_DEVICES; i++) {
 | |
| 		if (network_table[i] == hso_dev) {
 | |
| 			network_table[i] = NULL;
 | |
| 			break;
 | |
| 		}
 | |
| 	}
 | |
| 	if (i == HSO_MAX_NET_DEVICES)
 | |
| 		return -1;
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| /* Frees our network device */
 | |
| static void hso_free_net_device(struct hso_device *hso_dev)
 | |
| {
 | |
| 	int i;
 | |
| 	struct hso_net *hso_net = dev2net(hso_dev);
 | |
| 
 | |
| 	if (!hso_net)
 | |
| 		return;
 | |
| 
 | |
| 	remove_net_device(hso_net->parent);
 | |
| 
 | |
| 	if (hso_net->net)
 | |
| 		unregister_netdev(hso_net->net);
 | |
| 
 | |
| 	/* start freeing */
 | |
| 	for (i = 0; i < MUX_BULK_RX_BUF_COUNT; i++) {
 | |
| 		usb_free_urb(hso_net->mux_bulk_rx_urb_pool[i]);
 | |
| 		kfree(hso_net->mux_bulk_rx_buf_pool[i]);
 | |
| 		hso_net->mux_bulk_rx_buf_pool[i] = NULL;
 | |
| 	}
 | |
| 	usb_free_urb(hso_net->mux_bulk_tx_urb);
 | |
| 	kfree(hso_net->mux_bulk_tx_buf);
 | |
| 	hso_net->mux_bulk_tx_buf = NULL;
 | |
| 
 | |
| 	if (hso_net->net)
 | |
| 		free_netdev(hso_net->net);
 | |
| 
 | |
| 	kfree(hso_dev);
 | |
| }
 | |
| 
 | |
| static const struct net_device_ops hso_netdev_ops = {
 | |
| 	.ndo_open	= hso_net_open,
 | |
| 	.ndo_stop	= hso_net_close,
 | |
| 	.ndo_start_xmit = hso_net_start_xmit,
 | |
| 	.ndo_tx_timeout = hso_net_tx_timeout,
 | |
| };
 | |
| 
 | |
| /* initialize the network interface */
 | |
| static void hso_net_init(struct net_device *net)
 | |
| {
 | |
| 	struct hso_net *hso_net = netdev_priv(net);
 | |
| 
 | |
| 	D1("sizeof hso_net is %d", (int)sizeof(*hso_net));
 | |
| 
 | |
| 	/* fill in the other fields */
 | |
| 	net->netdev_ops = &hso_netdev_ops;
 | |
| 	net->watchdog_timeo = HSO_NET_TX_TIMEOUT;
 | |
| 	net->flags = IFF_POINTOPOINT | IFF_NOARP | IFF_MULTICAST;
 | |
| 	net->type = ARPHRD_NONE;
 | |
| 	net->mtu = DEFAULT_MTU - 14;
 | |
| 	net->tx_queue_len = 10;
 | |
| 	net->ethtool_ops = &ops;
 | |
| 
 | |
| 	/* and initialize the semaphore */
 | |
| 	spin_lock_init(&hso_net->net_lock);
 | |
| }
 | |
| 
 | |
| /* Adds a network device in the network device table */
 | |
| static int add_net_device(struct hso_device *hso_dev)
 | |
| {
 | |
| 	int i;
 | |
| 
 | |
| 	for (i = 0; i < HSO_MAX_NET_DEVICES; i++) {
 | |
| 		if (network_table[i] == NULL) {
 | |
| 			network_table[i] = hso_dev;
 | |
| 			break;
 | |
| 		}
 | |
| 	}
 | |
| 	if (i == HSO_MAX_NET_DEVICES)
 | |
| 		return -1;
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int hso_rfkill_set_block(void *data, bool blocked)
 | |
| {
 | |
| 	struct hso_device *hso_dev = data;
 | |
| 	int enabled = !blocked;
 | |
| 	int rv;
 | |
| 
 | |
| 	mutex_lock(&hso_dev->mutex);
 | |
| 	if (hso_dev->usb_gone)
 | |
| 		rv = 0;
 | |
| 	else
 | |
| 		rv = usb_control_msg(hso_dev->usb, usb_rcvctrlpipe(hso_dev->usb, 0),
 | |
| 				       enabled ? 0x82 : 0x81, 0x40, 0, 0, NULL, 0,
 | |
| 				       USB_CTRL_SET_TIMEOUT);
 | |
| 	mutex_unlock(&hso_dev->mutex);
 | |
| 	return rv;
 | |
| }
 | |
| 
 | |
| static const struct rfkill_ops hso_rfkill_ops = {
 | |
| 	.set_block = hso_rfkill_set_block,
 | |
| };
 | |
| 
 | |
| /* Creates and sets up everything for rfkill */
 | |
| static void hso_create_rfkill(struct hso_device *hso_dev,
 | |
| 			     struct usb_interface *interface)
 | |
| {
 | |
| 	struct hso_net *hso_net = dev2net(hso_dev);
 | |
| 	struct device *dev = &hso_net->net->dev;
 | |
| 	char *rfkn;
 | |
| 
 | |
| 	rfkn = kzalloc(20, GFP_KERNEL);
 | |
| 	if (!rfkn)
 | |
| 		dev_err(dev, "%s - Out of memory\n", __func__);
 | |
| 
 | |
| 	snprintf(rfkn, 20, "hso-%d",
 | |
| 		 interface->altsetting->desc.bInterfaceNumber);
 | |
| 
 | |
| 	hso_net->rfkill = rfkill_alloc(rfkn,
 | |
| 				       &interface_to_usbdev(interface)->dev,
 | |
| 				       RFKILL_TYPE_WWAN,
 | |
| 				       &hso_rfkill_ops, hso_dev);
 | |
| 	if (!hso_net->rfkill) {
 | |
| 		dev_err(dev, "%s - Out of memory\n", __func__);
 | |
| 		kfree(rfkn);
 | |
| 		return;
 | |
| 	}
 | |
| 	if (rfkill_register(hso_net->rfkill) < 0) {
 | |
| 		rfkill_destroy(hso_net->rfkill);
 | |
| 		kfree(rfkn);
 | |
| 		hso_net->rfkill = NULL;
 | |
| 		dev_err(dev, "%s - Failed to register rfkill\n", __func__);
 | |
| 		return;
 | |
| 	}
 | |
| }
 | |
| 
 | |
| static struct device_type hso_type = {
 | |
| 	.name	= "wwan",
 | |
| };
 | |
| 
 | |
| /* Creates our network device */
 | |
| static struct hso_device *hso_create_net_device(struct usb_interface *interface,
 | |
| 						int port_spec)
 | |
| {
 | |
| 	int result, i;
 | |
| 	struct net_device *net;
 | |
| 	struct hso_net *hso_net;
 | |
| 	struct hso_device *hso_dev;
 | |
| 
 | |
| 	hso_dev = hso_create_device(interface, port_spec);
 | |
| 	if (!hso_dev)
 | |
| 		return NULL;
 | |
| 
 | |
| 	/* allocate our network device, then we can put in our private data */
 | |
| 	/* call hso_net_init to do the basic initialization */
 | |
| 	net = alloc_netdev(sizeof(struct hso_net), "hso%d", NET_NAME_UNKNOWN,
 | |
| 			   hso_net_init);
 | |
| 	if (!net) {
 | |
| 		dev_err(&interface->dev, "Unable to create ethernet device\n");
 | |
| 		goto exit;
 | |
| 	}
 | |
| 
 | |
| 	hso_net = netdev_priv(net);
 | |
| 
 | |
| 	hso_dev->port_data.dev_net = hso_net;
 | |
| 	hso_net->net = net;
 | |
| 	hso_net->parent = hso_dev;
 | |
| 
 | |
| 	hso_net->in_endp = hso_get_ep(interface, USB_ENDPOINT_XFER_BULK,
 | |
| 				      USB_DIR_IN);
 | |
| 	if (!hso_net->in_endp) {
 | |
| 		dev_err(&interface->dev, "Can't find BULK IN endpoint\n");
 | |
| 		goto exit;
 | |
| 	}
 | |
| 	hso_net->out_endp = hso_get_ep(interface, USB_ENDPOINT_XFER_BULK,
 | |
| 				       USB_DIR_OUT);
 | |
| 	if (!hso_net->out_endp) {
 | |
| 		dev_err(&interface->dev, "Can't find BULK OUT endpoint\n");
 | |
| 		goto exit;
 | |
| 	}
 | |
| 	SET_NETDEV_DEV(net, &interface->dev);
 | |
| 	SET_NETDEV_DEVTYPE(net, &hso_type);
 | |
| 
 | |
| 	/* registering our net device */
 | |
| 	result = register_netdev(net);
 | |
| 	if (result) {
 | |
| 		dev_err(&interface->dev, "Failed to register device\n");
 | |
| 		goto exit;
 | |
| 	}
 | |
| 
 | |
| 	/* start allocating */
 | |
| 	for (i = 0; i < MUX_BULK_RX_BUF_COUNT; i++) {
 | |
| 		hso_net->mux_bulk_rx_urb_pool[i] = usb_alloc_urb(0, GFP_KERNEL);
 | |
| 		if (!hso_net->mux_bulk_rx_urb_pool[i]) {
 | |
| 			dev_err(&interface->dev, "Could not allocate rx urb\n");
 | |
| 			goto exit;
 | |
| 		}
 | |
| 		hso_net->mux_bulk_rx_buf_pool[i] = kzalloc(MUX_BULK_RX_BUF_SIZE,
 | |
| 							   GFP_KERNEL);
 | |
| 		if (!hso_net->mux_bulk_rx_buf_pool[i])
 | |
| 			goto exit;
 | |
| 	}
 | |
| 	hso_net->mux_bulk_tx_urb = usb_alloc_urb(0, GFP_KERNEL);
 | |
| 	if (!hso_net->mux_bulk_tx_urb) {
 | |
| 		dev_err(&interface->dev, "Could not allocate tx urb\n");
 | |
| 		goto exit;
 | |
| 	}
 | |
| 	hso_net->mux_bulk_tx_buf = kzalloc(MUX_BULK_TX_BUF_SIZE, GFP_KERNEL);
 | |
| 	if (!hso_net->mux_bulk_tx_buf)
 | |
| 		goto exit;
 | |
| 
 | |
| 	add_net_device(hso_dev);
 | |
| 
 | |
| 	hso_log_port(hso_dev);
 | |
| 
 | |
| 	hso_create_rfkill(hso_dev, interface);
 | |
| 
 | |
| 	return hso_dev;
 | |
| exit:
 | |
| 	hso_free_net_device(hso_dev);
 | |
| 	return NULL;
 | |
| }
 | |
| 
 | |
| static void hso_free_tiomget(struct hso_serial *serial)
 | |
| {
 | |
| 	struct hso_tiocmget *tiocmget;
 | |
| 	if (!serial)
 | |
| 		return;
 | |
| 	tiocmget = serial->tiocmget;
 | |
| 	if (tiocmget) {
 | |
| 		usb_free_urb(tiocmget->urb);
 | |
| 		tiocmget->urb = NULL;
 | |
| 		serial->tiocmget = NULL;
 | |
| 		kfree(tiocmget);
 | |
| 	}
 | |
| }
 | |
| 
 | |
| /* Frees an AT channel ( goes for both mux and non-mux ) */
 | |
| static void hso_free_serial_device(struct hso_device *hso_dev)
 | |
| {
 | |
| 	struct hso_serial *serial = dev2ser(hso_dev);
 | |
| 
 | |
| 	if (!serial)
 | |
| 		return;
 | |
| 	set_serial_by_index(serial->minor, NULL);
 | |
| 
 | |
| 	hso_serial_common_free(serial);
 | |
| 
 | |
| 	if (serial->shared_int) {
 | |
| 		mutex_lock(&serial->shared_int->shared_int_lock);
 | |
| 		if (--serial->shared_int->ref_count == 0)
 | |
| 			hso_free_shared_int(serial->shared_int);
 | |
| 		else
 | |
| 			mutex_unlock(&serial->shared_int->shared_int_lock);
 | |
| 	}
 | |
| 	hso_free_tiomget(serial);
 | |
| 	kfree(serial);
 | |
| 	kfree(hso_dev);
 | |
| }
 | |
| 
 | |
| /* Creates a bulk AT channel */
 | |
| static struct hso_device *hso_create_bulk_serial_device(
 | |
| 			struct usb_interface *interface, int port)
 | |
| {
 | |
| 	struct hso_device *hso_dev;
 | |
| 	struct hso_serial *serial;
 | |
| 	int num_urbs;
 | |
| 	struct hso_tiocmget *tiocmget;
 | |
| 
 | |
| 	hso_dev = hso_create_device(interface, port);
 | |
| 	if (!hso_dev)
 | |
| 		return NULL;
 | |
| 
 | |
| 	serial = kzalloc(sizeof(*serial), GFP_KERNEL);
 | |
| 	if (!serial)
 | |
| 		goto exit;
 | |
| 
 | |
| 	serial->parent = hso_dev;
 | |
| 	hso_dev->port_data.dev_serial = serial;
 | |
| 
 | |
| 	if ((port & HSO_PORT_MASK) == HSO_PORT_MODEM) {
 | |
| 		num_urbs = 2;
 | |
| 		serial->tiocmget = kzalloc(sizeof(struct hso_tiocmget),
 | |
| 					   GFP_KERNEL);
 | |
| 		/* it isn't going to break our heart if serial->tiocmget
 | |
| 		 *  allocation fails don't bother checking this.
 | |
| 		 */
 | |
| 		if (serial->tiocmget) {
 | |
| 			tiocmget = serial->tiocmget;
 | |
| 			tiocmget->urb = usb_alloc_urb(0, GFP_KERNEL);
 | |
| 			if (tiocmget->urb) {
 | |
| 				mutex_init(&tiocmget->mutex);
 | |
| 				init_waitqueue_head(&tiocmget->waitq);
 | |
| 				tiocmget->endp = hso_get_ep(
 | |
| 					interface,
 | |
| 					USB_ENDPOINT_XFER_INT,
 | |
| 					USB_DIR_IN);
 | |
| 			} else
 | |
| 				hso_free_tiomget(serial);
 | |
| 		}
 | |
| 	}
 | |
| 	else
 | |
| 		num_urbs = 1;
 | |
| 
 | |
| 	if (hso_serial_common_create(serial, num_urbs, BULK_URB_RX_SIZE,
 | |
| 				     BULK_URB_TX_SIZE))
 | |
| 		goto exit;
 | |
| 
 | |
| 	serial->in_endp = hso_get_ep(interface, USB_ENDPOINT_XFER_BULK,
 | |
| 				     USB_DIR_IN);
 | |
| 	if (!serial->in_endp) {
 | |
| 		dev_err(&interface->dev, "Failed to find BULK IN ep\n");
 | |
| 		goto exit2;
 | |
| 	}
 | |
| 
 | |
| 	if (!
 | |
| 	    (serial->out_endp =
 | |
| 	     hso_get_ep(interface, USB_ENDPOINT_XFER_BULK, USB_DIR_OUT))) {
 | |
| 		dev_err(&interface->dev, "Failed to find BULK IN ep\n");
 | |
| 		goto exit2;
 | |
| 	}
 | |
| 
 | |
| 	serial->write_data = hso_std_serial_write_data;
 | |
| 
 | |
| 	/* and record this serial */
 | |
| 	set_serial_by_index(serial->minor, serial);
 | |
| 
 | |
| 	/* setup the proc dirs and files if needed */
 | |
| 	hso_log_port(hso_dev);
 | |
| 
 | |
| 	/* done, return it */
 | |
| 	return hso_dev;
 | |
| 
 | |
| exit2:
 | |
| 	hso_serial_common_free(serial);
 | |
| exit:
 | |
| 	hso_free_tiomget(serial);
 | |
| 	kfree(serial);
 | |
| 	kfree(hso_dev);
 | |
| 	return NULL;
 | |
| }
 | |
| 
 | |
| /* Creates a multiplexed AT channel */
 | |
| static
 | |
| struct hso_device *hso_create_mux_serial_device(struct usb_interface *interface,
 | |
| 						int port,
 | |
| 						struct hso_shared_int *mux)
 | |
| {
 | |
| 	struct hso_device *hso_dev;
 | |
| 	struct hso_serial *serial;
 | |
| 	int port_spec;
 | |
| 
 | |
| 	port_spec = HSO_INTF_MUX;
 | |
| 	port_spec &= ~HSO_PORT_MASK;
 | |
| 
 | |
| 	port_spec |= hso_mux_to_port(port);
 | |
| 	if ((port_spec & HSO_PORT_MASK) == HSO_PORT_NO_PORT)
 | |
| 		return NULL;
 | |
| 
 | |
| 	hso_dev = hso_create_device(interface, port_spec);
 | |
| 	if (!hso_dev)
 | |
| 		return NULL;
 | |
| 
 | |
| 	serial = kzalloc(sizeof(*serial), GFP_KERNEL);
 | |
| 	if (!serial)
 | |
| 		goto exit;
 | |
| 
 | |
| 	hso_dev->port_data.dev_serial = serial;
 | |
| 	serial->parent = hso_dev;
 | |
| 
 | |
| 	if (hso_serial_common_create
 | |
| 	    (serial, 1, CTRL_URB_RX_SIZE, CTRL_URB_TX_SIZE))
 | |
| 		goto exit;
 | |
| 
 | |
| 	serial->tx_data_length--;
 | |
| 	serial->write_data = hso_mux_serial_write_data;
 | |
| 
 | |
| 	serial->shared_int = mux;
 | |
| 	mutex_lock(&serial->shared_int->shared_int_lock);
 | |
| 	serial->shared_int->ref_count++;
 | |
| 	mutex_unlock(&serial->shared_int->shared_int_lock);
 | |
| 
 | |
| 	/* and record this serial */
 | |
| 	set_serial_by_index(serial->minor, serial);
 | |
| 
 | |
| 	/* setup the proc dirs and files if needed */
 | |
| 	hso_log_port(hso_dev);
 | |
| 
 | |
| 	/* done, return it */
 | |
| 	return hso_dev;
 | |
| 
 | |
| exit:
 | |
| 	if (serial) {
 | |
| 		tty_unregister_device(tty_drv, serial->minor);
 | |
| 		kfree(serial);
 | |
| 	}
 | |
| 	if (hso_dev)
 | |
| 		kfree(hso_dev);
 | |
| 	return NULL;
 | |
| 
 | |
| }
 | |
| 
 | |
| static void hso_free_shared_int(struct hso_shared_int *mux)
 | |
| {
 | |
| 	usb_free_urb(mux->shared_intr_urb);
 | |
| 	kfree(mux->shared_intr_buf);
 | |
| 	mutex_unlock(&mux->shared_int_lock);
 | |
| 	kfree(mux);
 | |
| }
 | |
| 
 | |
| static
 | |
| struct hso_shared_int *hso_create_shared_int(struct usb_interface *interface)
 | |
| {
 | |
| 	struct hso_shared_int *mux = kzalloc(sizeof(*mux), GFP_KERNEL);
 | |
| 
 | |
| 	if (!mux)
 | |
| 		return NULL;
 | |
| 
 | |
| 	mux->intr_endp = hso_get_ep(interface, USB_ENDPOINT_XFER_INT,
 | |
| 				    USB_DIR_IN);
 | |
| 	if (!mux->intr_endp) {
 | |
| 		dev_err(&interface->dev, "Can't find INT IN endpoint\n");
 | |
| 		goto exit;
 | |
| 	}
 | |
| 
 | |
| 	mux->shared_intr_urb = usb_alloc_urb(0, GFP_KERNEL);
 | |
| 	if (!mux->shared_intr_urb) {
 | |
| 		dev_err(&interface->dev, "Could not allocate intr urb?\n");
 | |
| 		goto exit;
 | |
| 	}
 | |
| 	mux->shared_intr_buf =
 | |
| 		kzalloc(le16_to_cpu(mux->intr_endp->wMaxPacketSize),
 | |
| 			GFP_KERNEL);
 | |
| 	if (!mux->shared_intr_buf)
 | |
| 		goto exit;
 | |
| 
 | |
| 	mutex_init(&mux->shared_int_lock);
 | |
| 
 | |
| 	return mux;
 | |
| 
 | |
| exit:
 | |
| 	kfree(mux->shared_intr_buf);
 | |
| 	usb_free_urb(mux->shared_intr_urb);
 | |
| 	kfree(mux);
 | |
| 	return NULL;
 | |
| }
 | |
| 
 | |
| /* Gets the port spec for a certain interface */
 | |
| static int hso_get_config_data(struct usb_interface *interface)
 | |
| {
 | |
| 	struct usb_device *usbdev = interface_to_usbdev(interface);
 | |
| 	u8 *config_data = kmalloc(17, GFP_KERNEL);
 | |
| 	u32 if_num = interface->altsetting->desc.bInterfaceNumber;
 | |
| 	s32 result;
 | |
| 
 | |
| 	if (!config_data)
 | |
| 		return -ENOMEM;
 | |
| 	if (usb_control_msg(usbdev, usb_rcvctrlpipe(usbdev, 0),
 | |
| 			    0x86, 0xC0, 0, 0, config_data, 17,
 | |
| 			    USB_CTRL_SET_TIMEOUT) != 0x11) {
 | |
| 		kfree(config_data);
 | |
| 		return -EIO;
 | |
| 	}
 | |
| 
 | |
| 	switch (config_data[if_num]) {
 | |
| 	case 0x0:
 | |
| 		result = 0;
 | |
| 		break;
 | |
| 	case 0x1:
 | |
| 		result = HSO_PORT_DIAG;
 | |
| 		break;
 | |
| 	case 0x2:
 | |
| 		result = HSO_PORT_GPS;
 | |
| 		break;
 | |
| 	case 0x3:
 | |
| 		result = HSO_PORT_GPS_CONTROL;
 | |
| 		break;
 | |
| 	case 0x4:
 | |
| 		result = HSO_PORT_APP;
 | |
| 		break;
 | |
| 	case 0x5:
 | |
| 		result = HSO_PORT_APP2;
 | |
| 		break;
 | |
| 	case 0x6:
 | |
| 		result = HSO_PORT_CONTROL;
 | |
| 		break;
 | |
| 	case 0x7:
 | |
| 		result = HSO_PORT_NETWORK;
 | |
| 		break;
 | |
| 	case 0x8:
 | |
| 		result = HSO_PORT_MODEM;
 | |
| 		break;
 | |
| 	case 0x9:
 | |
| 		result = HSO_PORT_MSD;
 | |
| 		break;
 | |
| 	case 0xa:
 | |
| 		result = HSO_PORT_PCSC;
 | |
| 		break;
 | |
| 	case 0xb:
 | |
| 		result = HSO_PORT_VOICE;
 | |
| 		break;
 | |
| 	default:
 | |
| 		result = 0;
 | |
| 	}
 | |
| 
 | |
| 	if (result)
 | |
| 		result |= HSO_INTF_BULK;
 | |
| 
 | |
| 	if (config_data[16] & 0x1)
 | |
| 		result |= HSO_INFO_CRC_BUG;
 | |
| 
 | |
| 	kfree(config_data);
 | |
| 	return result;
 | |
| }
 | |
| 
 | |
| /* called once for each interface upon device insertion */
 | |
| static int hso_probe(struct usb_interface *interface,
 | |
| 		     const struct usb_device_id *id)
 | |
| {
 | |
| 	int mux, i, if_num, port_spec;
 | |
| 	unsigned char port_mask;
 | |
| 	struct hso_device *hso_dev = NULL;
 | |
| 	struct hso_shared_int *shared_int;
 | |
| 	struct hso_device *tmp_dev = NULL;
 | |
| 
 | |
| 	if (interface->cur_altsetting->desc.bInterfaceClass != 0xFF) {
 | |
| 		dev_err(&interface->dev, "Not our interface\n");
 | |
| 		return -ENODEV;
 | |
| 	}
 | |
| 
 | |
| 	if_num = interface->altsetting->desc.bInterfaceNumber;
 | |
| 
 | |
| 	/* Get the interface/port specification from either driver_info or from
 | |
| 	 * the device itself */
 | |
| 	if (id->driver_info)
 | |
| 		port_spec = ((u32 *)(id->driver_info))[if_num];
 | |
| 	else
 | |
| 		port_spec = hso_get_config_data(interface);
 | |
| 
 | |
| 	/* Check if we need to switch to alt interfaces prior to port
 | |
| 	 * configuration */
 | |
| 	if (interface->num_altsetting > 1)
 | |
| 		usb_set_interface(interface_to_usbdev(interface), if_num, 1);
 | |
| 	interface->needs_remote_wakeup = 1;
 | |
| 
 | |
| 	/* Allocate new hso device(s) */
 | |
| 	switch (port_spec & HSO_INTF_MASK) {
 | |
| 	case HSO_INTF_MUX:
 | |
| 		if ((port_spec & HSO_PORT_MASK) == HSO_PORT_NETWORK) {
 | |
| 			/* Create the network device */
 | |
| 			if (!disable_net) {
 | |
| 				hso_dev = hso_create_net_device(interface,
 | |
| 								port_spec);
 | |
| 				if (!hso_dev)
 | |
| 					goto exit;
 | |
| 				tmp_dev = hso_dev;
 | |
| 			}
 | |
| 		}
 | |
| 
 | |
| 		if (hso_get_mux_ports(interface, &port_mask))
 | |
| 			/* TODO: de-allocate everything */
 | |
| 			goto exit;
 | |
| 
 | |
| 		shared_int = hso_create_shared_int(interface);
 | |
| 		if (!shared_int)
 | |
| 			goto exit;
 | |
| 
 | |
| 		for (i = 1, mux = 0; i < 0x100; i = i << 1, mux++) {
 | |
| 			if (port_mask & i) {
 | |
| 				hso_dev = hso_create_mux_serial_device(
 | |
| 						interface, i, shared_int);
 | |
| 				if (!hso_dev)
 | |
| 					goto exit;
 | |
| 			}
 | |
| 		}
 | |
| 
 | |
| 		if (tmp_dev)
 | |
| 			hso_dev = tmp_dev;
 | |
| 		break;
 | |
| 
 | |
| 	case HSO_INTF_BULK:
 | |
| 		/* It's a regular bulk interface */
 | |
| 		if ((port_spec & HSO_PORT_MASK) == HSO_PORT_NETWORK) {
 | |
| 			if (!disable_net)
 | |
| 				hso_dev =
 | |
| 				    hso_create_net_device(interface, port_spec);
 | |
| 		} else {
 | |
| 			hso_dev =
 | |
| 			    hso_create_bulk_serial_device(interface, port_spec);
 | |
| 		}
 | |
| 		if (!hso_dev)
 | |
| 			goto exit;
 | |
| 		break;
 | |
| 	default:
 | |
| 		goto exit;
 | |
| 	}
 | |
| 
 | |
| 	/* save our data pointer in this device */
 | |
| 	usb_set_intfdata(interface, hso_dev);
 | |
| 
 | |
| 	/* done */
 | |
| 	return 0;
 | |
| exit:
 | |
| 	hso_free_interface(interface);
 | |
| 	return -ENODEV;
 | |
| }
 | |
| 
 | |
| /* device removed, cleaning up */
 | |
| static void hso_disconnect(struct usb_interface *interface)
 | |
| {
 | |
| 	hso_free_interface(interface);
 | |
| 
 | |
| 	/* remove reference of our private data */
 | |
| 	usb_set_intfdata(interface, NULL);
 | |
| }
 | |
| 
 | |
| static void async_get_intf(struct work_struct *data)
 | |
| {
 | |
| 	struct hso_device *hso_dev =
 | |
| 	    container_of(data, struct hso_device, async_get_intf);
 | |
| 	usb_autopm_get_interface(hso_dev->interface);
 | |
| }
 | |
| 
 | |
| static void async_put_intf(struct work_struct *data)
 | |
| {
 | |
| 	struct hso_device *hso_dev =
 | |
| 	    container_of(data, struct hso_device, async_put_intf);
 | |
| 	usb_autopm_put_interface(hso_dev->interface);
 | |
| }
 | |
| 
 | |
| static int hso_get_activity(struct hso_device *hso_dev)
 | |
| {
 | |
| 	if (hso_dev->usb->state == USB_STATE_SUSPENDED) {
 | |
| 		if (!hso_dev->is_active) {
 | |
| 			hso_dev->is_active = 1;
 | |
| 			schedule_work(&hso_dev->async_get_intf);
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	if (hso_dev->usb->state != USB_STATE_CONFIGURED)
 | |
| 		return -EAGAIN;
 | |
| 
 | |
| 	usb_mark_last_busy(hso_dev->usb);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int hso_put_activity(struct hso_device *hso_dev)
 | |
| {
 | |
| 	if (hso_dev->usb->state != USB_STATE_SUSPENDED) {
 | |
| 		if (hso_dev->is_active) {
 | |
| 			hso_dev->is_active = 0;
 | |
| 			schedule_work(&hso_dev->async_put_intf);
 | |
| 			return -EAGAIN;
 | |
| 		}
 | |
| 	}
 | |
| 	hso_dev->is_active = 0;
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| /* called by kernel when we need to suspend device */
 | |
| static int hso_suspend(struct usb_interface *iface, pm_message_t message)
 | |
| {
 | |
| 	int i, result;
 | |
| 
 | |
| 	/* Stop all serial ports */
 | |
| 	for (i = 0; i < HSO_SERIAL_TTY_MINORS; i++) {
 | |
| 		if (serial_table[i] && (serial_table[i]->interface == iface)) {
 | |
| 			result = hso_stop_serial_device(serial_table[i]);
 | |
| 			if (result)
 | |
| 				goto out;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	/* Stop all network ports */
 | |
| 	for (i = 0; i < HSO_MAX_NET_DEVICES; i++) {
 | |
| 		if (network_table[i] &&
 | |
| 		    (network_table[i]->interface == iface)) {
 | |
| 			result = hso_stop_net_device(network_table[i]);
 | |
| 			if (result)
 | |
| 				goto out;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| out:
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| /* called by kernel when we need to resume device */
 | |
| static int hso_resume(struct usb_interface *iface)
 | |
| {
 | |
| 	int i, result = 0;
 | |
| 	struct hso_net *hso_net;
 | |
| 
 | |
| 	/* Start all serial ports */
 | |
| 	for (i = 0; i < HSO_SERIAL_TTY_MINORS; i++) {
 | |
| 		if (serial_table[i] && (serial_table[i]->interface == iface)) {
 | |
| 			if (dev2ser(serial_table[i])->port.count) {
 | |
| 				result =
 | |
| 				    hso_start_serial_device(serial_table[i], GFP_NOIO);
 | |
| 				hso_kick_transmit(dev2ser(serial_table[i]));
 | |
| 				if (result)
 | |
| 					goto out;
 | |
| 			}
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	/* Start all network ports */
 | |
| 	for (i = 0; i < HSO_MAX_NET_DEVICES; i++) {
 | |
| 		if (network_table[i] &&
 | |
| 		    (network_table[i]->interface == iface)) {
 | |
| 			hso_net = dev2net(network_table[i]);
 | |
| 			if (hso_net->flags & IFF_UP) {
 | |
| 				/* First transmit any lingering data,
 | |
| 				   then restart the device. */
 | |
| 				if (hso_net->skb_tx_buf) {
 | |
| 					dev_dbg(&iface->dev,
 | |
| 						"Transmitting"
 | |
| 						" lingering data\n");
 | |
| 					hso_net_start_xmit(hso_net->skb_tx_buf,
 | |
| 							   hso_net->net);
 | |
| 					hso_net->skb_tx_buf = NULL;
 | |
| 				}
 | |
| 				result = hso_start_net_device(network_table[i]);
 | |
| 				if (result)
 | |
| 					goto out;
 | |
| 			}
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| out:
 | |
| 	return result;
 | |
| }
 | |
| 
 | |
| static void reset_device(struct work_struct *data)
 | |
| {
 | |
| 	struct hso_device *hso_dev =
 | |
| 	    container_of(data, struct hso_device, reset_device);
 | |
| 	struct usb_device *usb = hso_dev->usb;
 | |
| 	int result;
 | |
| 
 | |
| 	if (hso_dev->usb_gone) {
 | |
| 		D1("No reset during disconnect\n");
 | |
| 	} else {
 | |
| 		result = usb_lock_device_for_reset(usb, hso_dev->interface);
 | |
| 		if (result < 0)
 | |
| 			D1("unable to lock device for reset: %d\n", result);
 | |
| 		else {
 | |
| 			usb_reset_device(usb);
 | |
| 			usb_unlock_device(usb);
 | |
| 		}
 | |
| 	}
 | |
| }
 | |
| 
 | |
| static void hso_serial_ref_free(struct kref *ref)
 | |
| {
 | |
| 	struct hso_device *hso_dev = container_of(ref, struct hso_device, ref);
 | |
| 
 | |
| 	hso_free_serial_device(hso_dev);
 | |
| }
 | |
| 
 | |
| static void hso_free_interface(struct usb_interface *interface)
 | |
| {
 | |
| 	struct hso_serial *hso_dev;
 | |
| 	int i;
 | |
| 
 | |
| 	for (i = 0; i < HSO_SERIAL_TTY_MINORS; i++) {
 | |
| 		if (serial_table[i] &&
 | |
| 		    (serial_table[i]->interface == interface)) {
 | |
| 			hso_dev = dev2ser(serial_table[i]);
 | |
| 			tty_port_tty_hangup(&hso_dev->port, false);
 | |
| 			mutex_lock(&hso_dev->parent->mutex);
 | |
| 			hso_dev->parent->usb_gone = 1;
 | |
| 			mutex_unlock(&hso_dev->parent->mutex);
 | |
| 			kref_put(&serial_table[i]->ref, hso_serial_ref_free);
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	for (i = 0; i < HSO_MAX_NET_DEVICES; i++) {
 | |
| 		if (network_table[i] &&
 | |
| 		    (network_table[i]->interface == interface)) {
 | |
| 			struct rfkill *rfk = dev2net(network_table[i])->rfkill;
 | |
| 			/* hso_stop_net_device doesn't stop the net queue since
 | |
| 			 * traffic needs to start it again when suspended */
 | |
| 			netif_stop_queue(dev2net(network_table[i])->net);
 | |
| 			hso_stop_net_device(network_table[i]);
 | |
| 			cancel_work_sync(&network_table[i]->async_put_intf);
 | |
| 			cancel_work_sync(&network_table[i]->async_get_intf);
 | |
| 			if (rfk) {
 | |
| 				rfkill_unregister(rfk);
 | |
| 				rfkill_destroy(rfk);
 | |
| 			}
 | |
| 			hso_free_net_device(network_table[i]);
 | |
| 		}
 | |
| 	}
 | |
| }
 | |
| 
 | |
| /* Helper functions */
 | |
| 
 | |
| /* Get the endpoint ! */
 | |
| static struct usb_endpoint_descriptor *hso_get_ep(struct usb_interface *intf,
 | |
| 						  int type, int dir)
 | |
| {
 | |
| 	int i;
 | |
| 	struct usb_host_interface *iface = intf->cur_altsetting;
 | |
| 	struct usb_endpoint_descriptor *endp;
 | |
| 
 | |
| 	for (i = 0; i < iface->desc.bNumEndpoints; i++) {
 | |
| 		endp = &iface->endpoint[i].desc;
 | |
| 		if (((endp->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == dir) &&
 | |
| 		    (usb_endpoint_type(endp) == type))
 | |
| 			return endp;
 | |
| 	}
 | |
| 
 | |
| 	return NULL;
 | |
| }
 | |
| 
 | |
| /* Get the byte that describes which ports are enabled */
 | |
| static int hso_get_mux_ports(struct usb_interface *intf, unsigned char *ports)
 | |
| {
 | |
| 	int i;
 | |
| 	struct usb_host_interface *iface = intf->cur_altsetting;
 | |
| 
 | |
| 	if (iface->extralen == 3) {
 | |
| 		*ports = iface->extra[2];
 | |
| 		return 0;
 | |
| 	}
 | |
| 
 | |
| 	for (i = 0; i < iface->desc.bNumEndpoints; i++) {
 | |
| 		if (iface->endpoint[i].extralen == 3) {
 | |
| 			*ports = iface->endpoint[i].extra[2];
 | |
| 			return 0;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	return -1;
 | |
| }
 | |
| 
 | |
| /* interrupt urb needs to be submitted, used for serial read of muxed port */
 | |
| static int hso_mux_submit_intr_urb(struct hso_shared_int *shared_int,
 | |
| 				   struct usb_device *usb, gfp_t gfp)
 | |
| {
 | |
| 	int result;
 | |
| 
 | |
| 	usb_fill_int_urb(shared_int->shared_intr_urb, usb,
 | |
| 			 usb_rcvintpipe(usb,
 | |
| 				shared_int->intr_endp->bEndpointAddress & 0x7F),
 | |
| 			 shared_int->shared_intr_buf,
 | |
| 			 1,
 | |
| 			 intr_callback, shared_int,
 | |
| 			 shared_int->intr_endp->bInterval);
 | |
| 
 | |
| 	result = usb_submit_urb(shared_int->shared_intr_urb, gfp);
 | |
| 	if (result)
 | |
| 		dev_warn(&usb->dev, "%s failed mux_intr_urb %d\n", __func__,
 | |
| 			result);
 | |
| 
 | |
| 	return result;
 | |
| }
 | |
| 
 | |
| /* operations setup of the serial interface */
 | |
| static const struct tty_operations hso_serial_ops = {
 | |
| 	.open = hso_serial_open,
 | |
| 	.close = hso_serial_close,
 | |
| 	.write = hso_serial_write,
 | |
| 	.write_room = hso_serial_write_room,
 | |
| 	.ioctl = hso_serial_ioctl,
 | |
| 	.set_termios = hso_serial_set_termios,
 | |
| 	.chars_in_buffer = hso_serial_chars_in_buffer,
 | |
| 	.tiocmget = hso_serial_tiocmget,
 | |
| 	.tiocmset = hso_serial_tiocmset,
 | |
| 	.get_icount = hso_get_count,
 | |
| 	.unthrottle = hso_unthrottle
 | |
| };
 | |
| 
 | |
| static struct usb_driver hso_driver = {
 | |
| 	.name = driver_name,
 | |
| 	.probe = hso_probe,
 | |
| 	.disconnect = hso_disconnect,
 | |
| 	.id_table = hso_ids,
 | |
| 	.suspend = hso_suspend,
 | |
| 	.resume = hso_resume,
 | |
| 	.reset_resume = hso_resume,
 | |
| 	.supports_autosuspend = 1,
 | |
| 	.disable_hub_initiated_lpm = 1,
 | |
| };
 | |
| 
 | |
| static int __init hso_init(void)
 | |
| {
 | |
| 	int i;
 | |
| 	int result;
 | |
| 
 | |
| 	/* put it in the log */
 | |
| 	printk(KERN_INFO "hso: %s\n", version);
 | |
| 
 | |
| 	/* Initialise the serial table semaphore and table */
 | |
| 	spin_lock_init(&serial_table_lock);
 | |
| 	for (i = 0; i < HSO_SERIAL_TTY_MINORS; i++)
 | |
| 		serial_table[i] = NULL;
 | |
| 
 | |
| 	/* allocate our driver using the proper amount of supported minors */
 | |
| 	tty_drv = alloc_tty_driver(HSO_SERIAL_TTY_MINORS);
 | |
| 	if (!tty_drv)
 | |
| 		return -ENOMEM;
 | |
| 
 | |
| 	/* fill in all needed values */
 | |
| 	tty_drv->driver_name = driver_name;
 | |
| 	tty_drv->name = tty_filename;
 | |
| 
 | |
| 	/* if major number is provided as parameter, use that one */
 | |
| 	if (tty_major)
 | |
| 		tty_drv->major = tty_major;
 | |
| 
 | |
| 	tty_drv->minor_start = 0;
 | |
| 	tty_drv->type = TTY_DRIVER_TYPE_SERIAL;
 | |
| 	tty_drv->subtype = SERIAL_TYPE_NORMAL;
 | |
| 	tty_drv->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
 | |
| 	tty_drv->init_termios = tty_std_termios;
 | |
| 	hso_init_termios(&tty_drv->init_termios);
 | |
| 	tty_set_operations(tty_drv, &hso_serial_ops);
 | |
| 
 | |
| 	/* register the tty driver */
 | |
| 	result = tty_register_driver(tty_drv);
 | |
| 	if (result) {
 | |
| 		printk(KERN_ERR "%s - tty_register_driver failed(%d)\n",
 | |
| 			__func__, result);
 | |
| 		goto err_free_tty;
 | |
| 	}
 | |
| 
 | |
| 	/* register this module as an usb driver */
 | |
| 	result = usb_register(&hso_driver);
 | |
| 	if (result) {
 | |
| 		printk(KERN_ERR "Could not register hso driver? error: %d\n",
 | |
| 			result);
 | |
| 		goto err_unreg_tty;
 | |
| 	}
 | |
| 
 | |
| 	/* done */
 | |
| 	return 0;
 | |
| err_unreg_tty:
 | |
| 	tty_unregister_driver(tty_drv);
 | |
| err_free_tty:
 | |
| 	put_tty_driver(tty_drv);
 | |
| 	return result;
 | |
| }
 | |
| 
 | |
| static void __exit hso_exit(void)
 | |
| {
 | |
| 	printk(KERN_INFO "hso: unloaded\n");
 | |
| 
 | |
| 	tty_unregister_driver(tty_drv);
 | |
| 	put_tty_driver(tty_drv);
 | |
| 	/* deregister the usb driver */
 | |
| 	usb_deregister(&hso_driver);
 | |
| }
 | |
| 
 | |
| /* Module definitions */
 | |
| module_init(hso_init);
 | |
| module_exit(hso_exit);
 | |
| 
 | |
| MODULE_AUTHOR(MOD_AUTHOR);
 | |
| MODULE_DESCRIPTION(MOD_DESCRIPTION);
 | |
| MODULE_LICENSE(MOD_LICENSE);
 | |
| 
 | |
| /* change the debug level (eg: insmod hso.ko debug=0x04) */
 | |
| MODULE_PARM_DESC(debug, "Level of debug [0x01 | 0x02 | 0x04 | 0x08 | 0x10]");
 | |
| module_param(debug, int, S_IRUGO | S_IWUSR);
 | |
| 
 | |
| /* set the major tty number (eg: insmod hso.ko tty_major=245) */
 | |
| MODULE_PARM_DESC(tty_major, "Set the major tty number");
 | |
| module_param(tty_major, int, S_IRUGO | S_IWUSR);
 | |
| 
 | |
| /* disable network interface (eg: insmod hso.ko disable_net=1) */
 | |
| MODULE_PARM_DESC(disable_net, "Disable the network interface");
 | |
| module_param(disable_net, int, S_IRUGO | S_IWUSR);
 |