forge/linux-pinenote
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
linux-pinenote/drivers/net/phy/vitesse.c
Shruti Kanetkar 2ebb15820e net/phy: Remove return value for void function 
This was caught when using a spatch (aka. coccinelle) script
written by Joe Perches.

Cc: Joe Perches <joe@perches.com>
Signed-off-by: Shruti Kanetkar <Shruti@Freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-23 15:28:05 -04:00

339 lines
9.5 KiB
C
Raw Blame History

/*
* Driver for Vitesse PHYs
*
* Author: Kriston Carson
*
* Copyright (c) 2005, 2009, 2011 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/mii.h>
#include <linux/ethtool.h>
#include <linux/phy.h>
/* Vitesse Extended Page Magic Register(s) */
#define MII_VSC82X4_EXT_PAGE_16E 0x10
#define MII_VSC82X4_EXT_PAGE_17E 0x11
#define MII_VSC82X4_EXT_PAGE_18E 0x12
/* Vitesse Extended Control Register 1 */
#define MII_VSC8244_EXT_CON1 0x17
#define MII_VSC8244_EXTCON1_INIT 0x0000
#define MII_VSC8244_EXTCON1_TX_SKEW_MASK 0x0c00
#define MII_VSC8244_EXTCON1_RX_SKEW_MASK 0x0300
#define MII_VSC8244_EXTCON1_TX_SKEW 0x0800
#define MII_VSC8244_EXTCON1_RX_SKEW 0x0200
/* Vitesse Interrupt Mask Register */
#define MII_VSC8244_IMASK 0x19
#define MII_VSC8244_IMASK_IEN 0x8000
#define MII_VSC8244_IMASK_SPEED 0x4000
#define MII_VSC8244_IMASK_LINK 0x2000
#define MII_VSC8244_IMASK_DUPLEX 0x1000
#define MII_VSC8244_IMASK_MASK 0xf000
#define MII_VSC8221_IMASK_MASK 0xa000
/* Vitesse Interrupt Status Register */
#define MII_VSC8244_ISTAT 0x1a
#define MII_VSC8244_ISTAT_STATUS 0x8000
#define MII_VSC8244_ISTAT_SPEED 0x4000
#define MII_VSC8244_ISTAT_LINK 0x2000
#define MII_VSC8244_ISTAT_DUPLEX 0x1000
/* Vitesse Auxiliary Control/Status Register */
#define MII_VSC8244_AUX_CONSTAT 0x1c
#define MII_VSC8244_AUXCONSTAT_INIT 0x0000
#define MII_VSC8244_AUXCONSTAT_DUPLEX 0x0020
#define MII_VSC8244_AUXCONSTAT_SPEED 0x0018
#define MII_VSC8244_AUXCONSTAT_GBIT 0x0010
#define MII_VSC8244_AUXCONSTAT_100 0x0008
#define MII_VSC8221_AUXCONSTAT_INIT 0x0004 /* need to set this bit? */
#define MII_VSC8221_AUXCONSTAT_RESERVED 0x0004
/* Vitesse Extended Page Access Register */
#define MII_VSC82X4_EXT_PAGE_ACCESS 0x1f
#define PHY_ID_VSC8234 0x000fc620
#define PHY_ID_VSC8244 0x000fc6c0
#define PHY_ID_VSC8514 0x00070670
#define PHY_ID_VSC8574 0x000704a0
#define PHY_ID_VSC8662 0x00070660
#define PHY_ID_VSC8221 0x000fc550
#define PHY_ID_VSC8211 0x000fc4b0
MODULE_DESCRIPTION("Vitesse PHY driver");
MODULE_AUTHOR("Kriston Carson");
MODULE_LICENSE("GPL");
static int vsc824x_add_skew(struct phy_device *phydev)
{
int err;
int extcon;
extcon = phy_read(phydev, MII_VSC8244_EXT_CON1);
if (extcon < 0)
return extcon;
extcon &= ~(MII_VSC8244_EXTCON1_TX_SKEW_MASK |
MII_VSC8244_EXTCON1_RX_SKEW_MASK);
extcon |= (MII_VSC8244_EXTCON1_TX_SKEW |
MII_VSC8244_EXTCON1_RX_SKEW);
err = phy_write(phydev, MII_VSC8244_EXT_CON1, extcon);
return err;
}
static int vsc824x_config_init(struct phy_device *phydev)
{
int err;
err = phy_write(phydev, MII_VSC8244_AUX_CONSTAT,
MII_VSC8244_AUXCONSTAT_INIT);
if (err < 0)
return err;
if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID)
err = vsc824x_add_skew(phydev);
return err;
}
static int vsc824x_ack_interrupt(struct phy_device *phydev)
{
int err = 0;
/* Don't bother to ACK the interrupts if interrupts
* are disabled. The 824x cannot clear the interrupts
* if they are disabled.
*/
if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
err = phy_read(phydev, MII_VSC8244_ISTAT);
return (err < 0) ? err : 0;
}
static int vsc82xx_config_intr(struct phy_device *phydev)
{
int err;
if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
err = phy_write(phydev, MII_VSC8244_IMASK,
(phydev->drv->phy_id == PHY_ID_VSC8234 ||
phydev->drv->phy_id == PHY_ID_VSC8244 ||
phydev->drv->phy_id == PHY_ID_VSC8514 ||
phydev->drv->phy_id == PHY_ID_VSC8574) ?
MII_VSC8244_IMASK_MASK :
MII_VSC8221_IMASK_MASK);
else {
/* The Vitesse PHY cannot clear the interrupt
* once it has disabled them, so we clear them first
*/
err = phy_read(phydev, MII_VSC8244_ISTAT);
if (err < 0)
return err;
err = phy_write(phydev, MII_VSC8244_IMASK, 0);
}
return err;
}
static int vsc8221_config_init(struct phy_device *phydev)
{
int err;
err = phy_write(phydev, MII_VSC8244_AUX_CONSTAT,
MII_VSC8221_AUXCONSTAT_INIT);
return err;
/* Perhaps we should set EXT_CON1 based on the interface?
* Options are 802.3Z SerDes or SGMII
*/
}
/* vsc82x4_config_autocross_enable - Enable auto MDI/MDI-X for forced links
* @phydev: target phy_device struct
*
* Enable auto MDI/MDI-X when in 10/100 forced link speeds by writing
* special values in the VSC8234/VSC8244 extended reserved registers
*/
static int vsc82x4_config_autocross_enable(struct phy_device *phydev)
{
int ret;
if (phydev->autoneg == AUTONEG_ENABLE || phydev->speed > SPEED_100)
return 0;
/* map extended registers set 0x10 - 0x1e */
ret = phy_write(phydev, MII_VSC82X4_EXT_PAGE_ACCESS, 0x52b5);
if (ret >= 0)
ret = phy_write(phydev, MII_VSC82X4_EXT_PAGE_18E, 0x0012);
if (ret >= 0)
ret = phy_write(phydev, MII_VSC82X4_EXT_PAGE_17E, 0x2803);
if (ret >= 0)
ret = phy_write(phydev, MII_VSC82X4_EXT_PAGE_16E, 0x87fa);
/* map standard registers set 0x10 - 0x1e */
if (ret >= 0)
ret = phy_write(phydev, MII_VSC82X4_EXT_PAGE_ACCESS, 0x0000);
else
phy_write(phydev, MII_VSC82X4_EXT_PAGE_ACCESS, 0x0000);
return ret;
}
/* vsc82x4_config_aneg - restart auto-negotiation or write BMCR
* @phydev: target phy_device struct
*
* Description: If auto-negotiation is enabled, we configure the
* advertising, and then restart auto-negotiation. If it is not
* enabled, then we write the BMCR and also start the auto
* MDI/MDI-X feature
*/
static int vsc82x4_config_aneg(struct phy_device *phydev)
{
int ret;
/* Enable auto MDI/MDI-X when in 10/100 forced link speeds by
* writing special values in the VSC8234 extended reserved registers
*/
if (phydev->autoneg != AUTONEG_ENABLE && phydev->speed <= SPEED_100) {
ret = genphy_setup_forced(phydev);
if (ret < 0) /* error */
return ret;
return vsc82x4_config_autocross_enable(phydev);
}
return genphy_config_aneg(phydev);
}
/* Vitesse 82xx */
static struct phy_driver vsc82xx_driver[] = {
{
.phy_id = PHY_ID_VSC8234,
.name = "Vitesse VSC8234",
.phy_id_mask = 0x000ffff0,
.features = PHY_GBIT_FEATURES,
.flags = PHY_HAS_INTERRUPT,
.config_init = &vsc824x_config_init,
.config_aneg = &vsc82x4_config_aneg,
.read_status = &genphy_read_status,
.ack_interrupt = &vsc824x_ack_interrupt,
.config_intr = &vsc82xx_config_intr,
.driver = { .owner = THIS_MODULE,},
}, {
.phy_id = PHY_ID_VSC8244,
.name = "Vitesse VSC8244",
.phy_id_mask = 0x000fffc0,
.features = PHY_GBIT_FEATURES,
.flags = PHY_HAS_INTERRUPT,
.config_init = &vsc824x_config_init,
.config_aneg = &vsc82x4_config_aneg,
.read_status = &genphy_read_status,
.ack_interrupt = &vsc824x_ack_interrupt,
.config_intr = &vsc82xx_config_intr,
.driver = { .owner = THIS_MODULE,},
}, {
.phy_id = PHY_ID_VSC8514,
.name = "Vitesse VSC8514",
.phy_id_mask = 0x000ffff0,
.features = PHY_GBIT_FEATURES,
.flags = PHY_HAS_INTERRUPT,
.config_init = &vsc824x_config_init,
.config_aneg = &vsc82x4_config_aneg,
.read_status = &genphy_read_status,
.ack_interrupt = &vsc824x_ack_interrupt,
.config_intr = &vsc82xx_config_intr,
.driver = { .owner = THIS_MODULE,},
}, {
.phy_id = PHY_ID_VSC8574,
.name = "Vitesse VSC8574",
.phy_id_mask = 0x000ffff0,
.features = PHY_GBIT_FEATURES,
.flags = PHY_HAS_INTERRUPT,
.config_init = &vsc824x_config_init,
.config_aneg = &vsc82x4_config_aneg,
.read_status = &genphy_read_status,
.ack_interrupt = &vsc824x_ack_interrupt,
.config_intr = &vsc82xx_config_intr,
.driver = { .owner = THIS_MODULE,},
}, {
.phy_id = PHY_ID_VSC8662,
.name = "Vitesse VSC8662",
.phy_id_mask = 0x000ffff0,
.features = PHY_GBIT_FEATURES,
.flags = PHY_HAS_INTERRUPT,
.config_init = &vsc824x_config_init,
.config_aneg = &vsc82x4_config_aneg,
.read_status = &genphy_read_status,
.ack_interrupt = &vsc824x_ack_interrupt,
.config_intr = &vsc82xx_config_intr,
.driver = { .owner = THIS_MODULE,},
}, {
/* Vitesse 8221 */
.phy_id = PHY_ID_VSC8221,
.phy_id_mask = 0x000ffff0,
.name = "Vitesse VSC8221",
.features = PHY_GBIT_FEATURES,
.flags = PHY_HAS_INTERRUPT,
.config_init = &vsc8221_config_init,
.config_aneg = &genphy_config_aneg,
.read_status = &genphy_read_status,
.ack_interrupt = &vsc824x_ack_interrupt,
.config_intr = &vsc82xx_config_intr,
.driver = { .owner = THIS_MODULE,},
}, {
/* Vitesse 8211 */
.phy_id = PHY_ID_VSC8211,
.phy_id_mask = 0x000ffff0,
.name = "Vitesse VSC8211",
.features = PHY_GBIT_FEATURES,
.flags = PHY_HAS_INTERRUPT,
.config_init = &vsc8221_config_init,
.config_aneg = &genphy_config_aneg,
.read_status = &genphy_read_status,
.ack_interrupt = &vsc824x_ack_interrupt,
.config_intr = &vsc82xx_config_intr,
.driver = { .owner = THIS_MODULE,},
} };
static int __init vsc82xx_init(void)
{
return phy_drivers_register(vsc82xx_driver,
ARRAY_SIZE(vsc82xx_driver));
}
static void __exit vsc82xx_exit(void)
{
phy_drivers_unregister(vsc82xx_driver, ARRAY_SIZE(vsc82xx_driver));
}
module_init(vsc82xx_init);
module_exit(vsc82xx_exit);
static struct mdio_device_id __maybe_unused vitesse_tbl[] = {
{ PHY_ID_VSC8234, 0x000ffff0 },
{ PHY_ID_VSC8244, 0x000fffc0 },
{ PHY_ID_VSC8514, 0x000ffff0 },
{ PHY_ID_VSC8574, 0x000ffff0 },
{ PHY_ID_VSC8662, 0x000ffff0 },
{ PHY_ID_VSC8221, 0x000ffff0 },
{ PHY_ID_VSC8211, 0x000ffff0 },
{ }
};
MODULE_DEVICE_TABLE(mdio, vitesse_tbl);
Reference in a new issue View git blame Copy permalink