 b91677ad09
			
		
	
	
	b91677ad09
	
	
	
		
			
			drivers/media/platform/soc_camera/atmel-isi.c: In function 'start_streaming':
drivers/media/platform/soc_camera/atmel-isi.c:387:6: warning: variable 'sr' set but not used [-Wunused-but-set-variable]
  u32 sr = 0;
      ^
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
		
	
			
		
			
				
	
	
		
			1081 lines
		
	
	
	
		
			28 KiB
			
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			1081 lines
		
	
	
	
		
			28 KiB
			
		
	
	
	
		
			C
		
	
	
	
	
	
| /*
 | |
|  * Copyright (c) 2011 Atmel Corporation
 | |
|  * Josh Wu, <josh.wu@atmel.com>
 | |
|  *
 | |
|  * Based on previous work by Lars Haring, <lars.haring@atmel.com>
 | |
|  * and Sedji Gaouaou
 | |
|  * Based on the bttv driver for Bt848 with respective copyright holders
 | |
|  *
 | |
|  * This program is free software; you can redistribute it and/or modify
 | |
|  * it under the terms of the GNU General Public License version 2 as
 | |
|  * published by the Free Software Foundation.
 | |
|  */
 | |
| 
 | |
| #include <linux/clk.h>
 | |
| #include <linux/completion.h>
 | |
| #include <linux/delay.h>
 | |
| #include <linux/fs.h>
 | |
| #include <linux/init.h>
 | |
| #include <linux/interrupt.h>
 | |
| #include <linux/kernel.h>
 | |
| #include <linux/module.h>
 | |
| #include <linux/platform_device.h>
 | |
| #include <linux/slab.h>
 | |
| 
 | |
| #include <media/atmel-isi.h>
 | |
| #include <media/soc_camera.h>
 | |
| #include <media/soc_mediabus.h>
 | |
| #include <media/v4l2-of.h>
 | |
| #include <media/videobuf2-dma-contig.h>
 | |
| 
 | |
| #define MAX_BUFFER_NUM			32
 | |
| #define MAX_SUPPORT_WIDTH		2048
 | |
| #define MAX_SUPPORT_HEIGHT		2048
 | |
| #define VID_LIMIT_BYTES			(16 * 1024 * 1024)
 | |
| #define MIN_FRAME_RATE			15
 | |
| #define FRAME_INTERVAL_MILLI_SEC	(1000 / MIN_FRAME_RATE)
 | |
| #define ISI_DEFAULT_MCLK_FREQ		25000000
 | |
| 
 | |
| /* Frame buffer descriptor */
 | |
| struct fbd {
 | |
| 	/* Physical address of the frame buffer */
 | |
| 	u32 fb_address;
 | |
| 	/* DMA Control Register(only in HISI2) */
 | |
| 	u32 dma_ctrl;
 | |
| 	/* Physical address of the next fbd */
 | |
| 	u32 next_fbd_address;
 | |
| };
 | |
| 
 | |
| static void set_dma_ctrl(struct fbd *fb_desc, u32 ctrl)
 | |
| {
 | |
| 	fb_desc->dma_ctrl = ctrl;
 | |
| }
 | |
| 
 | |
| struct isi_dma_desc {
 | |
| 	struct list_head list;
 | |
| 	struct fbd *p_fbd;
 | |
| 	dma_addr_t fbd_phys;
 | |
| };
 | |
| 
 | |
| /* Frame buffer data */
 | |
| struct frame_buffer {
 | |
| 	struct vb2_buffer vb;
 | |
| 	struct isi_dma_desc *p_dma_desc;
 | |
| 	struct list_head list;
 | |
| };
 | |
| 
 | |
| struct atmel_isi {
 | |
| 	/* Protects the access of variables shared with the ISR */
 | |
| 	spinlock_t			lock;
 | |
| 	void __iomem			*regs;
 | |
| 
 | |
| 	int				sequence;
 | |
| 
 | |
| 	struct vb2_alloc_ctx		*alloc_ctx;
 | |
| 
 | |
| 	/* Allocate descriptors for dma buffer use */
 | |
| 	struct fbd			*p_fb_descriptors;
 | |
| 	dma_addr_t			fb_descriptors_phys;
 | |
| 	struct				list_head dma_desc_head;
 | |
| 	struct isi_dma_desc		dma_desc[MAX_BUFFER_NUM];
 | |
| 
 | |
| 	struct completion		complete;
 | |
| 	/* ISI peripherial clock */
 | |
| 	struct clk			*pclk;
 | |
| 	/* ISI_MCK, feed to camera sensor to generate pixel clock */
 | |
| 	struct clk			*mck;
 | |
| 	unsigned int			irq;
 | |
| 
 | |
| 	struct isi_platform_data	pdata;
 | |
| 	u16				width_flags;	/* max 12 bits */
 | |
| 
 | |
| 	struct list_head		video_buffer_list;
 | |
| 	struct frame_buffer		*active;
 | |
| 
 | |
| 	struct soc_camera_host		soc_host;
 | |
| };
 | |
| 
 | |
| static void isi_writel(struct atmel_isi *isi, u32 reg, u32 val)
 | |
| {
 | |
| 	writel(val, isi->regs + reg);
 | |
| }
 | |
| static u32 isi_readl(struct atmel_isi *isi, u32 reg)
 | |
| {
 | |
| 	return readl(isi->regs + reg);
 | |
| }
 | |
| 
 | |
| static int configure_geometry(struct atmel_isi *isi, u32 width,
 | |
| 			u32 height, enum v4l2_mbus_pixelcode code)
 | |
| {
 | |
| 	u32 cfg2, cr;
 | |
| 
 | |
| 	switch (code) {
 | |
| 	/* YUV, including grey */
 | |
| 	case V4L2_MBUS_FMT_Y8_1X8:
 | |
| 		cr = ISI_CFG2_GRAYSCALE;
 | |
| 		break;
 | |
| 	case V4L2_MBUS_FMT_VYUY8_2X8:
 | |
| 		cr = ISI_CFG2_YCC_SWAP_MODE_3;
 | |
| 		break;
 | |
| 	case V4L2_MBUS_FMT_UYVY8_2X8:
 | |
| 		cr = ISI_CFG2_YCC_SWAP_MODE_2;
 | |
| 		break;
 | |
| 	case V4L2_MBUS_FMT_YVYU8_2X8:
 | |
| 		cr = ISI_CFG2_YCC_SWAP_MODE_1;
 | |
| 		break;
 | |
| 	case V4L2_MBUS_FMT_YUYV8_2X8:
 | |
| 		cr = ISI_CFG2_YCC_SWAP_DEFAULT;
 | |
| 		break;
 | |
| 	/* RGB, TODO */
 | |
| 	default:
 | |
| 		return -EINVAL;
 | |
| 	}
 | |
| 
 | |
| 	isi_writel(isi, ISI_CTRL, ISI_CTRL_DIS);
 | |
| 
 | |
| 	cfg2 = isi_readl(isi, ISI_CFG2);
 | |
| 	/* Set YCC swap mode */
 | |
| 	cfg2 &= ~ISI_CFG2_YCC_SWAP_MODE_MASK;
 | |
| 	cfg2 |= cr;
 | |
| 	/* Set width */
 | |
| 	cfg2 &= ~(ISI_CFG2_IM_HSIZE_MASK);
 | |
| 	cfg2 |= ((width - 1) << ISI_CFG2_IM_HSIZE_OFFSET) &
 | |
| 			ISI_CFG2_IM_HSIZE_MASK;
 | |
| 	/* Set height */
 | |
| 	cfg2 &= ~(ISI_CFG2_IM_VSIZE_MASK);
 | |
| 	cfg2 |= ((height - 1) << ISI_CFG2_IM_VSIZE_OFFSET)
 | |
| 			& ISI_CFG2_IM_VSIZE_MASK;
 | |
| 	isi_writel(isi, ISI_CFG2, cfg2);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static irqreturn_t atmel_isi_handle_streaming(struct atmel_isi *isi)
 | |
| {
 | |
| 	if (isi->active) {
 | |
| 		struct vb2_buffer *vb = &isi->active->vb;
 | |
| 		struct frame_buffer *buf = isi->active;
 | |
| 
 | |
| 		list_del_init(&buf->list);
 | |
| 		v4l2_get_timestamp(&vb->v4l2_buf.timestamp);
 | |
| 		vb->v4l2_buf.sequence = isi->sequence++;
 | |
| 		vb2_buffer_done(vb, VB2_BUF_STATE_DONE);
 | |
| 	}
 | |
| 
 | |
| 	if (list_empty(&isi->video_buffer_list)) {
 | |
| 		isi->active = NULL;
 | |
| 	} else {
 | |
| 		/* start next dma frame. */
 | |
| 		isi->active = list_entry(isi->video_buffer_list.next,
 | |
| 					struct frame_buffer, list);
 | |
| 		isi_writel(isi, ISI_DMA_C_DSCR,
 | |
| 			(u32)isi->active->p_dma_desc->fbd_phys);
 | |
| 		isi_writel(isi, ISI_DMA_C_CTRL,
 | |
| 			ISI_DMA_CTRL_FETCH | ISI_DMA_CTRL_DONE);
 | |
| 		isi_writel(isi, ISI_DMA_CHER, ISI_DMA_CHSR_C_CH);
 | |
| 	}
 | |
| 	return IRQ_HANDLED;
 | |
| }
 | |
| 
 | |
| /* ISI interrupt service routine */
 | |
| static irqreturn_t isi_interrupt(int irq, void *dev_id)
 | |
| {
 | |
| 	struct atmel_isi *isi = dev_id;
 | |
| 	u32 status, mask, pending;
 | |
| 	irqreturn_t ret = IRQ_NONE;
 | |
| 
 | |
| 	spin_lock(&isi->lock);
 | |
| 
 | |
| 	status = isi_readl(isi, ISI_STATUS);
 | |
| 	mask = isi_readl(isi, ISI_INTMASK);
 | |
| 	pending = status & mask;
 | |
| 
 | |
| 	if (pending & ISI_CTRL_SRST) {
 | |
| 		complete(&isi->complete);
 | |
| 		isi_writel(isi, ISI_INTDIS, ISI_CTRL_SRST);
 | |
| 		ret = IRQ_HANDLED;
 | |
| 	} else if (pending & ISI_CTRL_DIS) {
 | |
| 		complete(&isi->complete);
 | |
| 		isi_writel(isi, ISI_INTDIS, ISI_CTRL_DIS);
 | |
| 		ret = IRQ_HANDLED;
 | |
| 	} else {
 | |
| 		if (likely(pending & ISI_SR_CXFR_DONE))
 | |
| 			ret = atmel_isi_handle_streaming(isi);
 | |
| 	}
 | |
| 
 | |
| 	spin_unlock(&isi->lock);
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| #define	WAIT_ISI_RESET		1
 | |
| #define	WAIT_ISI_DISABLE	0
 | |
| static int atmel_isi_wait_status(struct atmel_isi *isi, int wait_reset)
 | |
| {
 | |
| 	unsigned long timeout;
 | |
| 	/*
 | |
| 	 * The reset or disable will only succeed if we have a
 | |
| 	 * pixel clock from the camera.
 | |
| 	 */
 | |
| 	init_completion(&isi->complete);
 | |
| 
 | |
| 	if (wait_reset) {
 | |
| 		isi_writel(isi, ISI_INTEN, ISI_CTRL_SRST);
 | |
| 		isi_writel(isi, ISI_CTRL, ISI_CTRL_SRST);
 | |
| 	} else {
 | |
| 		isi_writel(isi, ISI_INTEN, ISI_CTRL_DIS);
 | |
| 		isi_writel(isi, ISI_CTRL, ISI_CTRL_DIS);
 | |
| 	}
 | |
| 
 | |
| 	timeout = wait_for_completion_timeout(&isi->complete,
 | |
| 			msecs_to_jiffies(100));
 | |
| 	if (timeout == 0)
 | |
| 		return -ETIMEDOUT;
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| /* ------------------------------------------------------------------
 | |
| 	Videobuf operations
 | |
|    ------------------------------------------------------------------*/
 | |
| static int queue_setup(struct vb2_queue *vq, const struct v4l2_format *fmt,
 | |
| 				unsigned int *nbuffers, unsigned int *nplanes,
 | |
| 				unsigned int sizes[], void *alloc_ctxs[])
 | |
| {
 | |
| 	struct soc_camera_device *icd = soc_camera_from_vb2q(vq);
 | |
| 	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 | |
| 	struct atmel_isi *isi = ici->priv;
 | |
| 	unsigned long size;
 | |
| 
 | |
| 	size = icd->sizeimage;
 | |
| 
 | |
| 	if (!*nbuffers || *nbuffers > MAX_BUFFER_NUM)
 | |
| 		*nbuffers = MAX_BUFFER_NUM;
 | |
| 
 | |
| 	if (size * *nbuffers > VID_LIMIT_BYTES)
 | |
| 		*nbuffers = VID_LIMIT_BYTES / size;
 | |
| 
 | |
| 	*nplanes = 1;
 | |
| 	sizes[0] = size;
 | |
| 	alloc_ctxs[0] = isi->alloc_ctx;
 | |
| 
 | |
| 	isi->sequence = 0;
 | |
| 	isi->active = NULL;
 | |
| 
 | |
| 	dev_dbg(icd->parent, "%s, count=%d, size=%ld\n", __func__,
 | |
| 		*nbuffers, size);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int buffer_init(struct vb2_buffer *vb)
 | |
| {
 | |
| 	struct frame_buffer *buf = container_of(vb, struct frame_buffer, vb);
 | |
| 
 | |
| 	buf->p_dma_desc = NULL;
 | |
| 	INIT_LIST_HEAD(&buf->list);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int buffer_prepare(struct vb2_buffer *vb)
 | |
| {
 | |
| 	struct soc_camera_device *icd = soc_camera_from_vb2q(vb->vb2_queue);
 | |
| 	struct frame_buffer *buf = container_of(vb, struct frame_buffer, vb);
 | |
| 	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 | |
| 	struct atmel_isi *isi = ici->priv;
 | |
| 	unsigned long size;
 | |
| 	struct isi_dma_desc *desc;
 | |
| 
 | |
| 	size = icd->sizeimage;
 | |
| 
 | |
| 	if (vb2_plane_size(vb, 0) < size) {
 | |
| 		dev_err(icd->parent, "%s data will not fit into plane (%lu < %lu)\n",
 | |
| 				__func__, vb2_plane_size(vb, 0), size);
 | |
| 		return -EINVAL;
 | |
| 	}
 | |
| 
 | |
| 	vb2_set_plane_payload(&buf->vb, 0, size);
 | |
| 
 | |
| 	if (!buf->p_dma_desc) {
 | |
| 		if (list_empty(&isi->dma_desc_head)) {
 | |
| 			dev_err(icd->parent, "Not enough dma descriptors.\n");
 | |
| 			return -EINVAL;
 | |
| 		} else {
 | |
| 			/* Get an available descriptor */
 | |
| 			desc = list_entry(isi->dma_desc_head.next,
 | |
| 						struct isi_dma_desc, list);
 | |
| 			/* Delete the descriptor since now it is used */
 | |
| 			list_del_init(&desc->list);
 | |
| 
 | |
| 			/* Initialize the dma descriptor */
 | |
| 			desc->p_fbd->fb_address =
 | |
| 					vb2_dma_contig_plane_dma_addr(vb, 0);
 | |
| 			desc->p_fbd->next_fbd_address = 0;
 | |
| 			set_dma_ctrl(desc->p_fbd, ISI_DMA_CTRL_WB);
 | |
| 
 | |
| 			buf->p_dma_desc = desc;
 | |
| 		}
 | |
| 	}
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static void buffer_cleanup(struct vb2_buffer *vb)
 | |
| {
 | |
| 	struct soc_camera_device *icd = soc_camera_from_vb2q(vb->vb2_queue);
 | |
| 	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 | |
| 	struct atmel_isi *isi = ici->priv;
 | |
| 	struct frame_buffer *buf = container_of(vb, struct frame_buffer, vb);
 | |
| 
 | |
| 	/* This descriptor is available now and we add to head list */
 | |
| 	if (buf->p_dma_desc)
 | |
| 		list_add(&buf->p_dma_desc->list, &isi->dma_desc_head);
 | |
| }
 | |
| 
 | |
| static void start_dma(struct atmel_isi *isi, struct frame_buffer *buffer)
 | |
| {
 | |
| 	u32 ctrl, cfg1;
 | |
| 
 | |
| 	cfg1 = isi_readl(isi, ISI_CFG1);
 | |
| 	/* Enable irq: cxfr for the codec path, pxfr for the preview path */
 | |
| 	isi_writel(isi, ISI_INTEN,
 | |
| 			ISI_SR_CXFR_DONE | ISI_SR_PXFR_DONE);
 | |
| 
 | |
| 	/* Check if already in a frame */
 | |
| 	if (isi_readl(isi, ISI_STATUS) & ISI_CTRL_CDC) {
 | |
| 		dev_err(isi->soc_host.icd->parent, "Already in frame handling.\n");
 | |
| 		return;
 | |
| 	}
 | |
| 
 | |
| 	isi_writel(isi, ISI_DMA_C_DSCR, (u32)buffer->p_dma_desc->fbd_phys);
 | |
| 	isi_writel(isi, ISI_DMA_C_CTRL, ISI_DMA_CTRL_FETCH | ISI_DMA_CTRL_DONE);
 | |
| 	isi_writel(isi, ISI_DMA_CHER, ISI_DMA_CHSR_C_CH);
 | |
| 
 | |
| 	cfg1 &= ~ISI_CFG1_FRATE_DIV_MASK;
 | |
| 	/* Enable linked list */
 | |
| 	cfg1 |= isi->pdata.frate | ISI_CFG1_DISCR;
 | |
| 
 | |
| 	/* Enable codec path and ISI */
 | |
| 	ctrl = ISI_CTRL_CDC | ISI_CTRL_EN;
 | |
| 	isi_writel(isi, ISI_CTRL, ctrl);
 | |
| 	isi_writel(isi, ISI_CFG1, cfg1);
 | |
| }
 | |
| 
 | |
| static void buffer_queue(struct vb2_buffer *vb)
 | |
| {
 | |
| 	struct soc_camera_device *icd = soc_camera_from_vb2q(vb->vb2_queue);
 | |
| 	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 | |
| 	struct atmel_isi *isi = ici->priv;
 | |
| 	struct frame_buffer *buf = container_of(vb, struct frame_buffer, vb);
 | |
| 	unsigned long flags = 0;
 | |
| 
 | |
| 	spin_lock_irqsave(&isi->lock, flags);
 | |
| 	list_add_tail(&buf->list, &isi->video_buffer_list);
 | |
| 
 | |
| 	if (isi->active == NULL) {
 | |
| 		isi->active = buf;
 | |
| 		if (vb2_is_streaming(vb->vb2_queue))
 | |
| 			start_dma(isi, buf);
 | |
| 	}
 | |
| 	spin_unlock_irqrestore(&isi->lock, flags);
 | |
| }
 | |
| 
 | |
| static int start_streaming(struct vb2_queue *vq, unsigned int count)
 | |
| {
 | |
| 	struct soc_camera_device *icd = soc_camera_from_vb2q(vq);
 | |
| 	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 | |
| 	struct atmel_isi *isi = ici->priv;
 | |
| 	int ret;
 | |
| 
 | |
| 	/* Reset ISI */
 | |
| 	ret = atmel_isi_wait_status(isi, WAIT_ISI_RESET);
 | |
| 	if (ret < 0) {
 | |
| 		dev_err(icd->parent, "Reset ISI timed out\n");
 | |
| 		return ret;
 | |
| 	}
 | |
| 	/* Disable all interrupts */
 | |
| 	isi_writel(isi, ISI_INTDIS, (u32)~0UL);
 | |
| 
 | |
| 	spin_lock_irq(&isi->lock);
 | |
| 	/* Clear any pending interrupt */
 | |
| 	isi_readl(isi, ISI_STATUS);
 | |
| 
 | |
| 	if (count)
 | |
| 		start_dma(isi, isi->active);
 | |
| 	spin_unlock_irq(&isi->lock);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| /* abort streaming and wait for last buffer */
 | |
| static void stop_streaming(struct vb2_queue *vq)
 | |
| {
 | |
| 	struct soc_camera_device *icd = soc_camera_from_vb2q(vq);
 | |
| 	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 | |
| 	struct atmel_isi *isi = ici->priv;
 | |
| 	struct frame_buffer *buf, *node;
 | |
| 	int ret = 0;
 | |
| 	unsigned long timeout;
 | |
| 
 | |
| 	spin_lock_irq(&isi->lock);
 | |
| 	isi->active = NULL;
 | |
| 	/* Release all active buffers */
 | |
| 	list_for_each_entry_safe(buf, node, &isi->video_buffer_list, list) {
 | |
| 		list_del_init(&buf->list);
 | |
| 		vb2_buffer_done(&buf->vb, VB2_BUF_STATE_ERROR);
 | |
| 	}
 | |
| 	spin_unlock_irq(&isi->lock);
 | |
| 
 | |
| 	timeout = jiffies + FRAME_INTERVAL_MILLI_SEC * HZ;
 | |
| 	/* Wait until the end of the current frame. */
 | |
| 	while ((isi_readl(isi, ISI_STATUS) & ISI_CTRL_CDC) &&
 | |
| 			time_before(jiffies, timeout))
 | |
| 		msleep(1);
 | |
| 
 | |
| 	if (time_after(jiffies, timeout)) {
 | |
| 		dev_err(icd->parent,
 | |
| 			"Timeout waiting for finishing codec request\n");
 | |
| 		return;
 | |
| 	}
 | |
| 
 | |
| 	/* Disable interrupts */
 | |
| 	isi_writel(isi, ISI_INTDIS,
 | |
| 			ISI_SR_CXFR_DONE | ISI_SR_PXFR_DONE);
 | |
| 
 | |
| 	/* Disable ISI and wait for it is done */
 | |
| 	ret = atmel_isi_wait_status(isi, WAIT_ISI_DISABLE);
 | |
| 	if (ret < 0)
 | |
| 		dev_err(icd->parent, "Disable ISI timed out\n");
 | |
| }
 | |
| 
 | |
| static struct vb2_ops isi_video_qops = {
 | |
| 	.queue_setup		= queue_setup,
 | |
| 	.buf_init		= buffer_init,
 | |
| 	.buf_prepare		= buffer_prepare,
 | |
| 	.buf_cleanup		= buffer_cleanup,
 | |
| 	.buf_queue		= buffer_queue,
 | |
| 	.start_streaming	= start_streaming,
 | |
| 	.stop_streaming		= stop_streaming,
 | |
| 	.wait_prepare		= soc_camera_unlock,
 | |
| 	.wait_finish		= soc_camera_lock,
 | |
| };
 | |
| 
 | |
| /* ------------------------------------------------------------------
 | |
| 	SOC camera operations for the device
 | |
|    ------------------------------------------------------------------*/
 | |
| static int isi_camera_init_videobuf(struct vb2_queue *q,
 | |
| 				     struct soc_camera_device *icd)
 | |
| {
 | |
| 	q->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
 | |
| 	q->io_modes = VB2_MMAP;
 | |
| 	q->drv_priv = icd;
 | |
| 	q->buf_struct_size = sizeof(struct frame_buffer);
 | |
| 	q->ops = &isi_video_qops;
 | |
| 	q->mem_ops = &vb2_dma_contig_memops;
 | |
| 	q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC;
 | |
| 
 | |
| 	return vb2_queue_init(q);
 | |
| }
 | |
| 
 | |
| static int isi_camera_set_fmt(struct soc_camera_device *icd,
 | |
| 			      struct v4l2_format *f)
 | |
| {
 | |
| 	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 | |
| 	struct atmel_isi *isi = ici->priv;
 | |
| 	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
 | |
| 	const struct soc_camera_format_xlate *xlate;
 | |
| 	struct v4l2_pix_format *pix = &f->fmt.pix;
 | |
| 	struct v4l2_mbus_framefmt mf;
 | |
| 	int ret;
 | |
| 
 | |
| 	xlate = soc_camera_xlate_by_fourcc(icd, pix->pixelformat);
 | |
| 	if (!xlate) {
 | |
| 		dev_warn(icd->parent, "Format %x not found\n",
 | |
| 			 pix->pixelformat);
 | |
| 		return -EINVAL;
 | |
| 	}
 | |
| 
 | |
| 	dev_dbg(icd->parent, "Plan to set format %dx%d\n",
 | |
| 			pix->width, pix->height);
 | |
| 
 | |
| 	mf.width	= pix->width;
 | |
| 	mf.height	= pix->height;
 | |
| 	mf.field	= pix->field;
 | |
| 	mf.colorspace	= pix->colorspace;
 | |
| 	mf.code		= xlate->code;
 | |
| 
 | |
| 	ret = v4l2_subdev_call(sd, video, s_mbus_fmt, &mf);
 | |
| 	if (ret < 0)
 | |
| 		return ret;
 | |
| 
 | |
| 	if (mf.code != xlate->code)
 | |
| 		return -EINVAL;
 | |
| 
 | |
| 	ret = configure_geometry(isi, pix->width, pix->height, xlate->code);
 | |
| 	if (ret < 0)
 | |
| 		return ret;
 | |
| 
 | |
| 	pix->width		= mf.width;
 | |
| 	pix->height		= mf.height;
 | |
| 	pix->field		= mf.field;
 | |
| 	pix->colorspace		= mf.colorspace;
 | |
| 	icd->current_fmt	= xlate;
 | |
| 
 | |
| 	dev_dbg(icd->parent, "Finally set format %dx%d\n",
 | |
| 		pix->width, pix->height);
 | |
| 
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| static int isi_camera_try_fmt(struct soc_camera_device *icd,
 | |
| 			      struct v4l2_format *f)
 | |
| {
 | |
| 	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
 | |
| 	const struct soc_camera_format_xlate *xlate;
 | |
| 	struct v4l2_pix_format *pix = &f->fmt.pix;
 | |
| 	struct v4l2_mbus_framefmt mf;
 | |
| 	u32 pixfmt = pix->pixelformat;
 | |
| 	int ret;
 | |
| 
 | |
| 	xlate = soc_camera_xlate_by_fourcc(icd, pixfmt);
 | |
| 	if (pixfmt && !xlate) {
 | |
| 		dev_warn(icd->parent, "Format %x not found\n", pixfmt);
 | |
| 		return -EINVAL;
 | |
| 	}
 | |
| 
 | |
| 	/* limit to Atmel ISI hardware capabilities */
 | |
| 	if (pix->height > MAX_SUPPORT_HEIGHT)
 | |
| 		pix->height = MAX_SUPPORT_HEIGHT;
 | |
| 	if (pix->width > MAX_SUPPORT_WIDTH)
 | |
| 		pix->width = MAX_SUPPORT_WIDTH;
 | |
| 
 | |
| 	/* limit to sensor capabilities */
 | |
| 	mf.width	= pix->width;
 | |
| 	mf.height	= pix->height;
 | |
| 	mf.field	= pix->field;
 | |
| 	mf.colorspace	= pix->colorspace;
 | |
| 	mf.code		= xlate->code;
 | |
| 
 | |
| 	ret = v4l2_subdev_call(sd, video, try_mbus_fmt, &mf);
 | |
| 	if (ret < 0)
 | |
| 		return ret;
 | |
| 
 | |
| 	pix->width	= mf.width;
 | |
| 	pix->height	= mf.height;
 | |
| 	pix->colorspace	= mf.colorspace;
 | |
| 
 | |
| 	switch (mf.field) {
 | |
| 	case V4L2_FIELD_ANY:
 | |
| 		pix->field = V4L2_FIELD_NONE;
 | |
| 		break;
 | |
| 	case V4L2_FIELD_NONE:
 | |
| 		break;
 | |
| 	default:
 | |
| 		dev_err(icd->parent, "Field type %d unsupported.\n",
 | |
| 			mf.field);
 | |
| 		ret = -EINVAL;
 | |
| 	}
 | |
| 
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| static const struct soc_mbus_pixelfmt isi_camera_formats[] = {
 | |
| 	{
 | |
| 		.fourcc			= V4L2_PIX_FMT_YUYV,
 | |
| 		.name			= "Packed YUV422 16 bit",
 | |
| 		.bits_per_sample	= 8,
 | |
| 		.packing		= SOC_MBUS_PACKING_2X8_PADHI,
 | |
| 		.order			= SOC_MBUS_ORDER_LE,
 | |
| 		.layout			= SOC_MBUS_LAYOUT_PACKED,
 | |
| 	},
 | |
| };
 | |
| 
 | |
| /* This will be corrected as we get more formats */
 | |
| static bool isi_camera_packing_supported(const struct soc_mbus_pixelfmt *fmt)
 | |
| {
 | |
| 	return	fmt->packing == SOC_MBUS_PACKING_NONE ||
 | |
| 		(fmt->bits_per_sample == 8 &&
 | |
| 		 fmt->packing == SOC_MBUS_PACKING_2X8_PADHI) ||
 | |
| 		(fmt->bits_per_sample > 8 &&
 | |
| 		 fmt->packing == SOC_MBUS_PACKING_EXTEND16);
 | |
| }
 | |
| 
 | |
| #define ISI_BUS_PARAM (V4L2_MBUS_MASTER |	\
 | |
| 		V4L2_MBUS_HSYNC_ACTIVE_HIGH |	\
 | |
| 		V4L2_MBUS_HSYNC_ACTIVE_LOW |	\
 | |
| 		V4L2_MBUS_VSYNC_ACTIVE_HIGH |	\
 | |
| 		V4L2_MBUS_VSYNC_ACTIVE_LOW |	\
 | |
| 		V4L2_MBUS_PCLK_SAMPLE_RISING |	\
 | |
| 		V4L2_MBUS_PCLK_SAMPLE_FALLING |	\
 | |
| 		V4L2_MBUS_DATA_ACTIVE_HIGH)
 | |
| 
 | |
| static int isi_camera_try_bus_param(struct soc_camera_device *icd,
 | |
| 				    unsigned char buswidth)
 | |
| {
 | |
| 	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
 | |
| 	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 | |
| 	struct atmel_isi *isi = ici->priv;
 | |
| 	struct v4l2_mbus_config cfg = {.type = V4L2_MBUS_PARALLEL,};
 | |
| 	unsigned long common_flags;
 | |
| 	int ret;
 | |
| 
 | |
| 	ret = v4l2_subdev_call(sd, video, g_mbus_config, &cfg);
 | |
| 	if (!ret) {
 | |
| 		common_flags = soc_mbus_config_compatible(&cfg,
 | |
| 							  ISI_BUS_PARAM);
 | |
| 		if (!common_flags) {
 | |
| 			dev_warn(icd->parent,
 | |
| 				 "Flags incompatible: camera 0x%x, host 0x%x\n",
 | |
| 				 cfg.flags, ISI_BUS_PARAM);
 | |
| 			return -EINVAL;
 | |
| 		}
 | |
| 	} else if (ret != -ENOIOCTLCMD) {
 | |
| 		return ret;
 | |
| 	}
 | |
| 
 | |
| 	if ((1 << (buswidth - 1)) & isi->width_flags)
 | |
| 		return 0;
 | |
| 	return -EINVAL;
 | |
| }
 | |
| 
 | |
| 
 | |
| static int isi_camera_get_formats(struct soc_camera_device *icd,
 | |
| 				  unsigned int idx,
 | |
| 				  struct soc_camera_format_xlate *xlate)
 | |
| {
 | |
| 	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
 | |
| 	int formats = 0, ret;
 | |
| 	/* sensor format */
 | |
| 	enum v4l2_mbus_pixelcode code;
 | |
| 	/* soc camera host format */
 | |
| 	const struct soc_mbus_pixelfmt *fmt;
 | |
| 
 | |
| 	ret = v4l2_subdev_call(sd, video, enum_mbus_fmt, idx, &code);
 | |
| 	if (ret < 0)
 | |
| 		/* No more formats */
 | |
| 		return 0;
 | |
| 
 | |
| 	fmt = soc_mbus_get_fmtdesc(code);
 | |
| 	if (!fmt) {
 | |
| 		dev_err(icd->parent,
 | |
| 			"Invalid format code #%u: %d\n", idx, code);
 | |
| 		return 0;
 | |
| 	}
 | |
| 
 | |
| 	/* This also checks support for the requested bits-per-sample */
 | |
| 	ret = isi_camera_try_bus_param(icd, fmt->bits_per_sample);
 | |
| 	if (ret < 0) {
 | |
| 		dev_err(icd->parent,
 | |
| 			"Fail to try the bus parameters.\n");
 | |
| 		return 0;
 | |
| 	}
 | |
| 
 | |
| 	switch (code) {
 | |
| 	case V4L2_MBUS_FMT_UYVY8_2X8:
 | |
| 	case V4L2_MBUS_FMT_VYUY8_2X8:
 | |
| 	case V4L2_MBUS_FMT_YUYV8_2X8:
 | |
| 	case V4L2_MBUS_FMT_YVYU8_2X8:
 | |
| 		formats++;
 | |
| 		if (xlate) {
 | |
| 			xlate->host_fmt	= &isi_camera_formats[0];
 | |
| 			xlate->code	= code;
 | |
| 			xlate++;
 | |
| 			dev_dbg(icd->parent, "Providing format %s using code %d\n",
 | |
| 				isi_camera_formats[0].name, code);
 | |
| 		}
 | |
| 		break;
 | |
| 	default:
 | |
| 		if (!isi_camera_packing_supported(fmt))
 | |
| 			return 0;
 | |
| 		if (xlate)
 | |
| 			dev_dbg(icd->parent,
 | |
| 				"Providing format %s in pass-through mode\n",
 | |
| 				fmt->name);
 | |
| 	}
 | |
| 
 | |
| 	/* Generic pass-through */
 | |
| 	formats++;
 | |
| 	if (xlate) {
 | |
| 		xlate->host_fmt	= fmt;
 | |
| 		xlate->code	= code;
 | |
| 		xlate++;
 | |
| 	}
 | |
| 
 | |
| 	return formats;
 | |
| }
 | |
| 
 | |
| static int isi_camera_add_device(struct soc_camera_device *icd)
 | |
| {
 | |
| 	dev_dbg(icd->parent, "Atmel ISI Camera driver attached to camera %d\n",
 | |
| 		 icd->devnum);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static void isi_camera_remove_device(struct soc_camera_device *icd)
 | |
| {
 | |
| 	dev_dbg(icd->parent, "Atmel ISI Camera driver detached from camera %d\n",
 | |
| 		 icd->devnum);
 | |
| }
 | |
| 
 | |
| /* Called with .host_lock held */
 | |
| static int isi_camera_clock_start(struct soc_camera_host *ici)
 | |
| {
 | |
| 	struct atmel_isi *isi = ici->priv;
 | |
| 	int ret;
 | |
| 
 | |
| 	ret = clk_prepare_enable(isi->pclk);
 | |
| 	if (ret)
 | |
| 		return ret;
 | |
| 
 | |
| 	if (!IS_ERR(isi->mck)) {
 | |
| 		ret = clk_prepare_enable(isi->mck);
 | |
| 		if (ret) {
 | |
| 			clk_disable_unprepare(isi->pclk);
 | |
| 			return ret;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| /* Called with .host_lock held */
 | |
| static void isi_camera_clock_stop(struct soc_camera_host *ici)
 | |
| {
 | |
| 	struct atmel_isi *isi = ici->priv;
 | |
| 
 | |
| 	if (!IS_ERR(isi->mck))
 | |
| 		clk_disable_unprepare(isi->mck);
 | |
| 	clk_disable_unprepare(isi->pclk);
 | |
| }
 | |
| 
 | |
| static unsigned int isi_camera_poll(struct file *file, poll_table *pt)
 | |
| {
 | |
| 	struct soc_camera_device *icd = file->private_data;
 | |
| 
 | |
| 	return vb2_poll(&icd->vb2_vidq, file, pt);
 | |
| }
 | |
| 
 | |
| static int isi_camera_querycap(struct soc_camera_host *ici,
 | |
| 			       struct v4l2_capability *cap)
 | |
| {
 | |
| 	strcpy(cap->driver, "atmel-isi");
 | |
| 	strcpy(cap->card, "Atmel Image Sensor Interface");
 | |
| 	cap->capabilities = (V4L2_CAP_VIDEO_CAPTURE |
 | |
| 				V4L2_CAP_STREAMING);
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int isi_camera_set_bus_param(struct soc_camera_device *icd)
 | |
| {
 | |
| 	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
 | |
| 	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 | |
| 	struct atmel_isi *isi = ici->priv;
 | |
| 	struct v4l2_mbus_config cfg = {.type = V4L2_MBUS_PARALLEL,};
 | |
| 	unsigned long common_flags;
 | |
| 	int ret;
 | |
| 	u32 cfg1 = 0;
 | |
| 
 | |
| 	ret = v4l2_subdev_call(sd, video, g_mbus_config, &cfg);
 | |
| 	if (!ret) {
 | |
| 		common_flags = soc_mbus_config_compatible(&cfg,
 | |
| 							  ISI_BUS_PARAM);
 | |
| 		if (!common_flags) {
 | |
| 			dev_warn(icd->parent,
 | |
| 				 "Flags incompatible: camera 0x%x, host 0x%x\n",
 | |
| 				 cfg.flags, ISI_BUS_PARAM);
 | |
| 			return -EINVAL;
 | |
| 		}
 | |
| 	} else if (ret != -ENOIOCTLCMD) {
 | |
| 		return ret;
 | |
| 	} else {
 | |
| 		common_flags = ISI_BUS_PARAM;
 | |
| 	}
 | |
| 	dev_dbg(icd->parent, "Flags cam: 0x%x host: 0x%x common: 0x%lx\n",
 | |
| 		cfg.flags, ISI_BUS_PARAM, common_flags);
 | |
| 
 | |
| 	/* Make choises, based on platform preferences */
 | |
| 	if ((common_flags & V4L2_MBUS_HSYNC_ACTIVE_HIGH) &&
 | |
| 	    (common_flags & V4L2_MBUS_HSYNC_ACTIVE_LOW)) {
 | |
| 		if (isi->pdata.hsync_act_low)
 | |
| 			common_flags &= ~V4L2_MBUS_HSYNC_ACTIVE_HIGH;
 | |
| 		else
 | |
| 			common_flags &= ~V4L2_MBUS_HSYNC_ACTIVE_LOW;
 | |
| 	}
 | |
| 
 | |
| 	if ((common_flags & V4L2_MBUS_VSYNC_ACTIVE_HIGH) &&
 | |
| 	    (common_flags & V4L2_MBUS_VSYNC_ACTIVE_LOW)) {
 | |
| 		if (isi->pdata.vsync_act_low)
 | |
| 			common_flags &= ~V4L2_MBUS_VSYNC_ACTIVE_HIGH;
 | |
| 		else
 | |
| 			common_flags &= ~V4L2_MBUS_VSYNC_ACTIVE_LOW;
 | |
| 	}
 | |
| 
 | |
| 	if ((common_flags & V4L2_MBUS_PCLK_SAMPLE_RISING) &&
 | |
| 	    (common_flags & V4L2_MBUS_PCLK_SAMPLE_FALLING)) {
 | |
| 		if (isi->pdata.pclk_act_falling)
 | |
| 			common_flags &= ~V4L2_MBUS_PCLK_SAMPLE_RISING;
 | |
| 		else
 | |
| 			common_flags &= ~V4L2_MBUS_PCLK_SAMPLE_FALLING;
 | |
| 	}
 | |
| 
 | |
| 	cfg.flags = common_flags;
 | |
| 	ret = v4l2_subdev_call(sd, video, s_mbus_config, &cfg);
 | |
| 	if (ret < 0 && ret != -ENOIOCTLCMD) {
 | |
| 		dev_dbg(icd->parent, "camera s_mbus_config(0x%lx) returned %d\n",
 | |
| 			common_flags, ret);
 | |
| 		return ret;
 | |
| 	}
 | |
| 
 | |
| 	/* set bus param for ISI */
 | |
| 	if (common_flags & V4L2_MBUS_HSYNC_ACTIVE_LOW)
 | |
| 		cfg1 |= ISI_CFG1_HSYNC_POL_ACTIVE_LOW;
 | |
| 	if (common_flags & V4L2_MBUS_VSYNC_ACTIVE_LOW)
 | |
| 		cfg1 |= ISI_CFG1_VSYNC_POL_ACTIVE_LOW;
 | |
| 	if (common_flags & V4L2_MBUS_PCLK_SAMPLE_FALLING)
 | |
| 		cfg1 |= ISI_CFG1_PIXCLK_POL_ACTIVE_FALLING;
 | |
| 
 | |
| 	if (isi->pdata.has_emb_sync)
 | |
| 		cfg1 |= ISI_CFG1_EMB_SYNC;
 | |
| 	if (isi->pdata.full_mode)
 | |
| 		cfg1 |= ISI_CFG1_FULL_MODE;
 | |
| 
 | |
| 	isi_writel(isi, ISI_CTRL, ISI_CTRL_DIS);
 | |
| 	isi_writel(isi, ISI_CFG1, cfg1);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static struct soc_camera_host_ops isi_soc_camera_host_ops = {
 | |
| 	.owner		= THIS_MODULE,
 | |
| 	.add		= isi_camera_add_device,
 | |
| 	.remove		= isi_camera_remove_device,
 | |
| 	.clock_start	= isi_camera_clock_start,
 | |
| 	.clock_stop	= isi_camera_clock_stop,
 | |
| 	.set_fmt	= isi_camera_set_fmt,
 | |
| 	.try_fmt	= isi_camera_try_fmt,
 | |
| 	.get_formats	= isi_camera_get_formats,
 | |
| 	.init_videobuf2	= isi_camera_init_videobuf,
 | |
| 	.poll		= isi_camera_poll,
 | |
| 	.querycap	= isi_camera_querycap,
 | |
| 	.set_bus_param	= isi_camera_set_bus_param,
 | |
| };
 | |
| 
 | |
| /* -----------------------------------------------------------------------*/
 | |
| static int atmel_isi_remove(struct platform_device *pdev)
 | |
| {
 | |
| 	struct soc_camera_host *soc_host = to_soc_camera_host(&pdev->dev);
 | |
| 	struct atmel_isi *isi = container_of(soc_host,
 | |
| 					struct atmel_isi, soc_host);
 | |
| 
 | |
| 	soc_camera_host_unregister(soc_host);
 | |
| 	vb2_dma_contig_cleanup_ctx(isi->alloc_ctx);
 | |
| 	dma_free_coherent(&pdev->dev,
 | |
| 			sizeof(struct fbd) * MAX_BUFFER_NUM,
 | |
| 			isi->p_fb_descriptors,
 | |
| 			isi->fb_descriptors_phys);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int atmel_isi_probe_dt(struct atmel_isi *isi,
 | |
| 			struct platform_device *pdev)
 | |
| {
 | |
| 	struct device_node *np= pdev->dev.of_node;
 | |
| 	struct v4l2_of_endpoint ep;
 | |
| 	int err;
 | |
| 
 | |
| 	/* Default settings for ISI */
 | |
| 	isi->pdata.full_mode = 1;
 | |
| 	isi->pdata.mck_hz = ISI_DEFAULT_MCLK_FREQ;
 | |
| 	isi->pdata.frate = ISI_CFG1_FRATE_CAPTURE_ALL;
 | |
| 
 | |
| 	np = of_graph_get_next_endpoint(np, NULL);
 | |
| 	if (!np) {
 | |
| 		dev_err(&pdev->dev, "Could not find the endpoint\n");
 | |
| 		return -EINVAL;
 | |
| 	}
 | |
| 
 | |
| 	err = v4l2_of_parse_endpoint(np, &ep);
 | |
| 	if (err) {
 | |
| 		dev_err(&pdev->dev, "Could not parse the endpoint\n");
 | |
| 		goto err_probe_dt;
 | |
| 	}
 | |
| 
 | |
| 	switch (ep.bus.parallel.bus_width) {
 | |
| 	case 8:
 | |
| 		isi->pdata.data_width_flags = ISI_DATAWIDTH_8;
 | |
| 		break;
 | |
| 	case 10:
 | |
| 		isi->pdata.data_width_flags =
 | |
| 				ISI_DATAWIDTH_8 | ISI_DATAWIDTH_10;
 | |
| 		break;
 | |
| 	default:
 | |
| 		dev_err(&pdev->dev, "Unsupported bus width: %d\n",
 | |
| 				ep.bus.parallel.bus_width);
 | |
| 		err = -EINVAL;
 | |
| 		goto err_probe_dt;
 | |
| 	}
 | |
| 
 | |
| err_probe_dt:
 | |
| 	of_node_put(np);
 | |
| 
 | |
| 	return err;
 | |
| }
 | |
| 
 | |
| static int atmel_isi_probe(struct platform_device *pdev)
 | |
| {
 | |
| 	unsigned int irq;
 | |
| 	struct atmel_isi *isi;
 | |
| 	struct resource *regs;
 | |
| 	int ret, i;
 | |
| 	struct device *dev = &pdev->dev;
 | |
| 	struct soc_camera_host *soc_host;
 | |
| 	struct isi_platform_data *pdata;
 | |
| 
 | |
| 	pdata = dev->platform_data;
 | |
| 	if ((!pdata || !pdata->data_width_flags) && !pdev->dev.of_node) {
 | |
| 		dev_err(&pdev->dev,
 | |
| 			"No config available for Atmel ISI\n");
 | |
| 		return -EINVAL;
 | |
| 	}
 | |
| 
 | |
| 	isi = devm_kzalloc(&pdev->dev, sizeof(struct atmel_isi), GFP_KERNEL);
 | |
| 	if (!isi) {
 | |
| 		dev_err(&pdev->dev, "Can't allocate interface!\n");
 | |
| 		return -ENOMEM;
 | |
| 	}
 | |
| 
 | |
| 	isi->pclk = devm_clk_get(&pdev->dev, "isi_clk");
 | |
| 	if (IS_ERR(isi->pclk))
 | |
| 		return PTR_ERR(isi->pclk);
 | |
| 
 | |
| 	if (pdata) {
 | |
| 		memcpy(&isi->pdata, pdata, sizeof(isi->pdata));
 | |
| 	} else {
 | |
| 		ret = atmel_isi_probe_dt(isi, pdev);
 | |
| 		if (ret)
 | |
| 			return ret;
 | |
| 	}
 | |
| 
 | |
| 	isi->active = NULL;
 | |
| 	spin_lock_init(&isi->lock);
 | |
| 	INIT_LIST_HEAD(&isi->video_buffer_list);
 | |
| 	INIT_LIST_HEAD(&isi->dma_desc_head);
 | |
| 
 | |
| 	/* ISI_MCK is the sensor master clock. It should be handled by the
 | |
| 	 * sensor driver directly, as the ISI has no use for that clock. Make
 | |
| 	 * the clock optional here while platforms transition to the correct
 | |
| 	 * model.
 | |
| 	 */
 | |
| 	isi->mck = devm_clk_get(dev, "isi_mck");
 | |
| 	if (!IS_ERR(isi->mck)) {
 | |
| 		/* Set ISI_MCK's frequency, it should be faster than pixel
 | |
| 		 * clock.
 | |
| 		 */
 | |
| 		ret = clk_set_rate(isi->mck, isi->pdata.mck_hz);
 | |
| 		if (ret < 0)
 | |
| 			return ret;
 | |
| 	}
 | |
| 
 | |
| 	isi->p_fb_descriptors = dma_alloc_coherent(&pdev->dev,
 | |
| 				sizeof(struct fbd) * MAX_BUFFER_NUM,
 | |
| 				&isi->fb_descriptors_phys,
 | |
| 				GFP_KERNEL);
 | |
| 	if (!isi->p_fb_descriptors) {
 | |
| 		dev_err(&pdev->dev, "Can't allocate descriptors!\n");
 | |
| 		return -ENOMEM;
 | |
| 	}
 | |
| 
 | |
| 	for (i = 0; i < MAX_BUFFER_NUM; i++) {
 | |
| 		isi->dma_desc[i].p_fbd = isi->p_fb_descriptors + i;
 | |
| 		isi->dma_desc[i].fbd_phys = isi->fb_descriptors_phys +
 | |
| 					i * sizeof(struct fbd);
 | |
| 		list_add(&isi->dma_desc[i].list, &isi->dma_desc_head);
 | |
| 	}
 | |
| 
 | |
| 	isi->alloc_ctx = vb2_dma_contig_init_ctx(&pdev->dev);
 | |
| 	if (IS_ERR(isi->alloc_ctx)) {
 | |
| 		ret = PTR_ERR(isi->alloc_ctx);
 | |
| 		goto err_alloc_ctx;
 | |
| 	}
 | |
| 
 | |
| 	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 | |
| 	isi->regs = devm_ioremap_resource(&pdev->dev, regs);
 | |
| 	if (IS_ERR(isi->regs)) {
 | |
| 		ret = PTR_ERR(isi->regs);
 | |
| 		goto err_ioremap;
 | |
| 	}
 | |
| 
 | |
| 	if (isi->pdata.data_width_flags & ISI_DATAWIDTH_8)
 | |
| 		isi->width_flags = 1 << 7;
 | |
| 	if (isi->pdata.data_width_flags & ISI_DATAWIDTH_10)
 | |
| 		isi->width_flags |= 1 << 9;
 | |
| 
 | |
| 	isi_writel(isi, ISI_CTRL, ISI_CTRL_DIS);
 | |
| 
 | |
| 	irq = platform_get_irq(pdev, 0);
 | |
| 	if (IS_ERR_VALUE(irq)) {
 | |
| 		ret = irq;
 | |
| 		goto err_req_irq;
 | |
| 	}
 | |
| 
 | |
| 	ret = devm_request_irq(&pdev->dev, irq, isi_interrupt, 0, "isi", isi);
 | |
| 	if (ret) {
 | |
| 		dev_err(&pdev->dev, "Unable to request irq %d\n", irq);
 | |
| 		goto err_req_irq;
 | |
| 	}
 | |
| 	isi->irq = irq;
 | |
| 
 | |
| 	soc_host		= &isi->soc_host;
 | |
| 	soc_host->drv_name	= "isi-camera";
 | |
| 	soc_host->ops		= &isi_soc_camera_host_ops;
 | |
| 	soc_host->priv		= isi;
 | |
| 	soc_host->v4l2_dev.dev	= &pdev->dev;
 | |
| 	soc_host->nr		= pdev->id;
 | |
| 
 | |
| 	if (isi->pdata.asd_sizes) {
 | |
| 		soc_host->asd = isi->pdata.asd;
 | |
| 		soc_host->asd_sizes = isi->pdata.asd_sizes;
 | |
| 	}
 | |
| 
 | |
| 	ret = soc_camera_host_register(soc_host);
 | |
| 	if (ret) {
 | |
| 		dev_err(&pdev->dev, "Unable to register soc camera host\n");
 | |
| 		goto err_register_soc_camera_host;
 | |
| 	}
 | |
| 	return 0;
 | |
| 
 | |
| err_register_soc_camera_host:
 | |
| err_req_irq:
 | |
| err_ioremap:
 | |
| 	vb2_dma_contig_cleanup_ctx(isi->alloc_ctx);
 | |
| err_alloc_ctx:
 | |
| 	dma_free_coherent(&pdev->dev,
 | |
| 			sizeof(struct fbd) * MAX_BUFFER_NUM,
 | |
| 			isi->p_fb_descriptors,
 | |
| 			isi->fb_descriptors_phys);
 | |
| 
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| static const struct of_device_id atmel_isi_of_match[] = {
 | |
| 	{ .compatible = "atmel,at91sam9g45-isi" },
 | |
| 	{ }
 | |
| };
 | |
| MODULE_DEVICE_TABLE(of, atmel_isi_of_match);
 | |
| 
 | |
| static struct platform_driver atmel_isi_driver = {
 | |
| 	.remove		= atmel_isi_remove,
 | |
| 	.driver		= {
 | |
| 		.name = "atmel_isi",
 | |
| 		.owner = THIS_MODULE,
 | |
| 		.of_match_table = of_match_ptr(atmel_isi_of_match),
 | |
| 	},
 | |
| };
 | |
| 
 | |
| module_platform_driver_probe(atmel_isi_driver, atmel_isi_probe);
 | |
| 
 | |
| MODULE_AUTHOR("Josh Wu <josh.wu@atmel.com>");
 | |
| MODULE_DESCRIPTION("The V4L2 driver for Atmel Linux");
 | |
| MODULE_LICENSE("GPL");
 | |
| MODULE_SUPPORTED_DEVICE("video");
 |