 afb666d1e7
			
		
	
	
	afb666d1e7
	
	
	
		
			
			Instead of using if (on == true), just use if (on). That allows a faster mental parsing when analyzing the code. Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
		
			
				
	
	
		
			488 lines
		
	
	
	
		
			12 KiB
			
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			488 lines
		
	
	
	
		
			12 KiB
			
		
	
	
	
		
			C
		
	
	
	
	
	
| /*
 | |
|  * drivers/media/i2c/lm3560.c
 | |
|  * General device driver for TI lm3560, FLASH LED Driver
 | |
|  *
 | |
|  * Copyright (C) 2013 Texas Instruments
 | |
|  *
 | |
|  * Contact: Daniel Jeong <gshark.jeong@gmail.com>
 | |
|  *			Ldd-Mlp <ldd-mlp@list.ti.com>
 | |
|  *
 | |
|  * This program is free software; you can redistribute it and/or
 | |
|  * modify it under the terms of the GNU General Public License
 | |
|  * version 2 as published by the Free Software Foundation.
 | |
|  *
 | |
|  * This program is distributed in the hope that it will be useful, but
 | |
|  * WITHOUT ANY WARRANTY; without even the implied warranty of
 | |
|  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 | |
|  * General Public License for more details.
 | |
|  */
 | |
| 
 | |
| #include <linux/delay.h>
 | |
| #include <linux/module.h>
 | |
| #include <linux/i2c.h>
 | |
| #include <linux/slab.h>
 | |
| #include <linux/mutex.h>
 | |
| #include <linux/regmap.h>
 | |
| #include <linux/videodev2.h>
 | |
| #include <media/lm3560.h>
 | |
| #include <media/v4l2-ctrls.h>
 | |
| #include <media/v4l2-device.h>
 | |
| 
 | |
| /* registers definitions */
 | |
| #define REG_ENABLE		0x10
 | |
| #define REG_TORCH_BR	0xa0
 | |
| #define REG_FLASH_BR	0xb0
 | |
| #define REG_FLASH_TOUT	0xc0
 | |
| #define REG_FLAG		0xd0
 | |
| #define REG_CONFIG1		0xe0
 | |
| 
 | |
| /* fault mask */
 | |
| #define FAULT_TIMEOUT	(1<<0)
 | |
| #define FAULT_OVERTEMP	(1<<1)
 | |
| #define FAULT_SHORT_CIRCUIT	(1<<2)
 | |
| 
 | |
| enum led_enable {
 | |
| 	MODE_SHDN = 0x0,
 | |
| 	MODE_TORCH = 0x2,
 | |
| 	MODE_FLASH = 0x3,
 | |
| };
 | |
| 
 | |
| /**
 | |
|  * struct lm3560_flash
 | |
|  *
 | |
|  * @pdata: platform data
 | |
|  * @regmap: reg. map for i2c
 | |
|  * @lock: muxtex for serial access.
 | |
|  * @led_mode: V4L2 LED mode
 | |
|  * @ctrls_led: V4L2 contols
 | |
|  * @subdev_led: V4L2 subdev
 | |
|  */
 | |
| struct lm3560_flash {
 | |
| 	struct device *dev;
 | |
| 	struct lm3560_platform_data *pdata;
 | |
| 	struct regmap *regmap;
 | |
| 	struct mutex lock;
 | |
| 
 | |
| 	enum v4l2_flash_led_mode led_mode;
 | |
| 	struct v4l2_ctrl_handler ctrls_led[LM3560_LED_MAX];
 | |
| 	struct v4l2_subdev subdev_led[LM3560_LED_MAX];
 | |
| };
 | |
| 
 | |
| #define to_lm3560_flash(_ctrl, _no)	\
 | |
| 	container_of(_ctrl->handler, struct lm3560_flash, ctrls_led[_no])
 | |
| 
 | |
| /* enable mode control */
 | |
| static int lm3560_mode_ctrl(struct lm3560_flash *flash)
 | |
| {
 | |
| 	int rval = -EINVAL;
 | |
| 
 | |
| 	switch (flash->led_mode) {
 | |
| 	case V4L2_FLASH_LED_MODE_NONE:
 | |
| 		rval = regmap_update_bits(flash->regmap,
 | |
| 					  REG_ENABLE, 0x03, MODE_SHDN);
 | |
| 		break;
 | |
| 	case V4L2_FLASH_LED_MODE_TORCH:
 | |
| 		rval = regmap_update_bits(flash->regmap,
 | |
| 					  REG_ENABLE, 0x03, MODE_TORCH);
 | |
| 		break;
 | |
| 	case V4L2_FLASH_LED_MODE_FLASH:
 | |
| 		rval = regmap_update_bits(flash->regmap,
 | |
| 					  REG_ENABLE, 0x03, MODE_FLASH);
 | |
| 		break;
 | |
| 	}
 | |
| 	return rval;
 | |
| }
 | |
| 
 | |
| /* led1/2 enable/disable */
 | |
| static int lm3560_enable_ctrl(struct lm3560_flash *flash,
 | |
| 			      enum lm3560_led_id led_no, bool on)
 | |
| {
 | |
| 	int rval;
 | |
| 
 | |
| 	if (led_no == LM3560_LED0) {
 | |
| 		if (on)
 | |
| 			rval = regmap_update_bits(flash->regmap,
 | |
| 						  REG_ENABLE, 0x08, 0x08);
 | |
| 		else
 | |
| 			rval = regmap_update_bits(flash->regmap,
 | |
| 						  REG_ENABLE, 0x08, 0x00);
 | |
| 	} else {
 | |
| 		if (on)
 | |
| 			rval = regmap_update_bits(flash->regmap,
 | |
| 						  REG_ENABLE, 0x10, 0x10);
 | |
| 		else
 | |
| 			rval = regmap_update_bits(flash->regmap,
 | |
| 						  REG_ENABLE, 0x10, 0x00);
 | |
| 	}
 | |
| 	return rval;
 | |
| }
 | |
| 
 | |
| /* torch1/2 brightness control */
 | |
| static int lm3560_torch_brt_ctrl(struct lm3560_flash *flash,
 | |
| 				 enum lm3560_led_id led_no, unsigned int brt)
 | |
| {
 | |
| 	int rval;
 | |
| 	u8 br_bits;
 | |
| 
 | |
| 	if (brt < LM3560_TORCH_BRT_MIN)
 | |
| 		return lm3560_enable_ctrl(flash, led_no, false);
 | |
| 	else
 | |
| 		rval = lm3560_enable_ctrl(flash, led_no, true);
 | |
| 
 | |
| 	br_bits = LM3560_TORCH_BRT_uA_TO_REG(brt);
 | |
| 	if (led_no == LM3560_LED0)
 | |
| 		rval = regmap_update_bits(flash->regmap,
 | |
| 					  REG_TORCH_BR, 0x07, br_bits);
 | |
| 	else
 | |
| 		rval = regmap_update_bits(flash->regmap,
 | |
| 					  REG_TORCH_BR, 0x38, br_bits << 3);
 | |
| 
 | |
| 	return rval;
 | |
| }
 | |
| 
 | |
| /* flash1/2 brightness control */
 | |
| static int lm3560_flash_brt_ctrl(struct lm3560_flash *flash,
 | |
| 				 enum lm3560_led_id led_no, unsigned int brt)
 | |
| {
 | |
| 	int rval;
 | |
| 	u8 br_bits;
 | |
| 
 | |
| 	if (brt < LM3560_FLASH_BRT_MIN)
 | |
| 		return lm3560_enable_ctrl(flash, led_no, false);
 | |
| 	else
 | |
| 		rval = lm3560_enable_ctrl(flash, led_no, true);
 | |
| 
 | |
| 	br_bits = LM3560_FLASH_BRT_uA_TO_REG(brt);
 | |
| 	if (led_no == LM3560_LED0)
 | |
| 		rval = regmap_update_bits(flash->regmap,
 | |
| 					  REG_FLASH_BR, 0x0f, br_bits);
 | |
| 	else
 | |
| 		rval = regmap_update_bits(flash->regmap,
 | |
| 					  REG_FLASH_BR, 0xf0, br_bits << 4);
 | |
| 
 | |
| 	return rval;
 | |
| }
 | |
| 
 | |
| /* v4l2 controls  */
 | |
| static int lm3560_get_ctrl(struct v4l2_ctrl *ctrl, enum lm3560_led_id led_no)
 | |
| {
 | |
| 	struct lm3560_flash *flash = to_lm3560_flash(ctrl, led_no);
 | |
| 	int rval = -EINVAL;
 | |
| 
 | |
| 	mutex_lock(&flash->lock);
 | |
| 
 | |
| 	if (ctrl->id == V4L2_CID_FLASH_FAULT) {
 | |
| 		s32 fault = 0;
 | |
| 		unsigned int reg_val;
 | |
| 		rval = regmap_read(flash->regmap, REG_FLAG, ®_val);
 | |
| 		if (rval < 0)
 | |
| 			goto out;
 | |
| 		if (reg_val & FAULT_SHORT_CIRCUIT)
 | |
| 			fault |= V4L2_FLASH_FAULT_SHORT_CIRCUIT;
 | |
| 		if (reg_val & FAULT_OVERTEMP)
 | |
| 			fault |= V4L2_FLASH_FAULT_OVER_TEMPERATURE;
 | |
| 		if (reg_val & FAULT_TIMEOUT)
 | |
| 			fault |= V4L2_FLASH_FAULT_TIMEOUT;
 | |
| 		ctrl->cur.val = fault;
 | |
| 	}
 | |
| 
 | |
| out:
 | |
| 	mutex_unlock(&flash->lock);
 | |
| 	return rval;
 | |
| }
 | |
| 
 | |
| static int lm3560_set_ctrl(struct v4l2_ctrl *ctrl, enum lm3560_led_id led_no)
 | |
| {
 | |
| 	struct lm3560_flash *flash = to_lm3560_flash(ctrl, led_no);
 | |
| 	u8 tout_bits;
 | |
| 	int rval = -EINVAL;
 | |
| 
 | |
| 	mutex_lock(&flash->lock);
 | |
| 
 | |
| 	switch (ctrl->id) {
 | |
| 	case V4L2_CID_FLASH_LED_MODE:
 | |
| 		flash->led_mode = ctrl->val;
 | |
| 		if (flash->led_mode != V4L2_FLASH_LED_MODE_FLASH)
 | |
| 			rval = lm3560_mode_ctrl(flash);
 | |
| 		break;
 | |
| 
 | |
| 	case V4L2_CID_FLASH_STROBE_SOURCE:
 | |
| 		rval = regmap_update_bits(flash->regmap,
 | |
| 					  REG_CONFIG1, 0x04, (ctrl->val) << 2);
 | |
| 		if (rval < 0)
 | |
| 			goto err_out;
 | |
| 		break;
 | |
| 
 | |
| 	case V4L2_CID_FLASH_STROBE:
 | |
| 		if (flash->led_mode != V4L2_FLASH_LED_MODE_FLASH) {
 | |
| 			rval = -EBUSY;
 | |
| 			goto err_out;
 | |
| 		}
 | |
| 		flash->led_mode = V4L2_FLASH_LED_MODE_FLASH;
 | |
| 		rval = lm3560_mode_ctrl(flash);
 | |
| 		break;
 | |
| 
 | |
| 	case V4L2_CID_FLASH_STROBE_STOP:
 | |
| 		if (flash->led_mode != V4L2_FLASH_LED_MODE_FLASH) {
 | |
| 			rval = -EBUSY;
 | |
| 			goto err_out;
 | |
| 		}
 | |
| 		flash->led_mode = V4L2_FLASH_LED_MODE_NONE;
 | |
| 		rval = lm3560_mode_ctrl(flash);
 | |
| 		break;
 | |
| 
 | |
| 	case V4L2_CID_FLASH_TIMEOUT:
 | |
| 		tout_bits = LM3560_FLASH_TOUT_ms_TO_REG(ctrl->val);
 | |
| 		rval = regmap_update_bits(flash->regmap,
 | |
| 					  REG_FLASH_TOUT, 0x1f, tout_bits);
 | |
| 		break;
 | |
| 
 | |
| 	case V4L2_CID_FLASH_INTENSITY:
 | |
| 		rval = lm3560_flash_brt_ctrl(flash, led_no, ctrl->val);
 | |
| 		break;
 | |
| 
 | |
| 	case V4L2_CID_FLASH_TORCH_INTENSITY:
 | |
| 		rval = lm3560_torch_brt_ctrl(flash, led_no, ctrl->val);
 | |
| 		break;
 | |
| 	}
 | |
| 
 | |
| err_out:
 | |
| 	mutex_unlock(&flash->lock);
 | |
| 	return rval;
 | |
| }
 | |
| 
 | |
| static int lm3560_led1_get_ctrl(struct v4l2_ctrl *ctrl)
 | |
| {
 | |
| 	return lm3560_get_ctrl(ctrl, LM3560_LED1);
 | |
| }
 | |
| 
 | |
| static int lm3560_led1_set_ctrl(struct v4l2_ctrl *ctrl)
 | |
| {
 | |
| 	return lm3560_set_ctrl(ctrl, LM3560_LED1);
 | |
| }
 | |
| 
 | |
| static int lm3560_led0_get_ctrl(struct v4l2_ctrl *ctrl)
 | |
| {
 | |
| 	return lm3560_get_ctrl(ctrl, LM3560_LED0);
 | |
| }
 | |
| 
 | |
| static int lm3560_led0_set_ctrl(struct v4l2_ctrl *ctrl)
 | |
| {
 | |
| 	return lm3560_set_ctrl(ctrl, LM3560_LED0);
 | |
| }
 | |
| 
 | |
| static const struct v4l2_ctrl_ops lm3560_led_ctrl_ops[LM3560_LED_MAX] = {
 | |
| 	[LM3560_LED0] = {
 | |
| 			 .g_volatile_ctrl = lm3560_led0_get_ctrl,
 | |
| 			 .s_ctrl = lm3560_led0_set_ctrl,
 | |
| 			 },
 | |
| 	[LM3560_LED1] = {
 | |
| 			 .g_volatile_ctrl = lm3560_led1_get_ctrl,
 | |
| 			 .s_ctrl = lm3560_led1_set_ctrl,
 | |
| 			 }
 | |
| };
 | |
| 
 | |
| static int lm3560_init_controls(struct lm3560_flash *flash,
 | |
| 				enum lm3560_led_id led_no)
 | |
| {
 | |
| 	struct v4l2_ctrl *fault;
 | |
| 	u32 max_flash_brt = flash->pdata->max_flash_brt[led_no];
 | |
| 	u32 max_torch_brt = flash->pdata->max_torch_brt[led_no];
 | |
| 	struct v4l2_ctrl_handler *hdl = &flash->ctrls_led[led_no];
 | |
| 	const struct v4l2_ctrl_ops *ops = &lm3560_led_ctrl_ops[led_no];
 | |
| 
 | |
| 	v4l2_ctrl_handler_init(hdl, 8);
 | |
| 
 | |
| 	/* flash mode */
 | |
| 	v4l2_ctrl_new_std_menu(hdl, ops, V4L2_CID_FLASH_LED_MODE,
 | |
| 			       V4L2_FLASH_LED_MODE_TORCH, ~0x7,
 | |
| 			       V4L2_FLASH_LED_MODE_NONE);
 | |
| 	flash->led_mode = V4L2_FLASH_LED_MODE_NONE;
 | |
| 
 | |
| 	/* flash source */
 | |
| 	v4l2_ctrl_new_std_menu(hdl, ops, V4L2_CID_FLASH_STROBE_SOURCE,
 | |
| 			       0x1, ~0x3, V4L2_FLASH_STROBE_SOURCE_SOFTWARE);
 | |
| 
 | |
| 	/* flash strobe */
 | |
| 	v4l2_ctrl_new_std(hdl, ops, V4L2_CID_FLASH_STROBE, 0, 0, 0, 0);
 | |
| 
 | |
| 	/* flash strobe stop */
 | |
| 	v4l2_ctrl_new_std(hdl, ops, V4L2_CID_FLASH_STROBE_STOP, 0, 0, 0, 0);
 | |
| 
 | |
| 	/* flash strobe timeout */
 | |
| 	v4l2_ctrl_new_std(hdl, ops, V4L2_CID_FLASH_TIMEOUT,
 | |
| 			  LM3560_FLASH_TOUT_MIN,
 | |
| 			  flash->pdata->max_flash_timeout,
 | |
| 			  LM3560_FLASH_TOUT_STEP,
 | |
| 			  flash->pdata->max_flash_timeout);
 | |
| 
 | |
| 	/* flash brt */
 | |
| 	v4l2_ctrl_new_std(hdl, ops, V4L2_CID_FLASH_INTENSITY,
 | |
| 			  LM3560_FLASH_BRT_MIN, max_flash_brt,
 | |
| 			  LM3560_FLASH_BRT_STEP, max_flash_brt);
 | |
| 
 | |
| 	/* torch brt */
 | |
| 	v4l2_ctrl_new_std(hdl, ops, V4L2_CID_FLASH_TORCH_INTENSITY,
 | |
| 			  LM3560_TORCH_BRT_MIN, max_torch_brt,
 | |
| 			  LM3560_TORCH_BRT_STEP, max_torch_brt);
 | |
| 
 | |
| 	/* fault */
 | |
| 	fault = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_FLASH_FAULT, 0,
 | |
| 				  V4L2_FLASH_FAULT_OVER_VOLTAGE
 | |
| 				  | V4L2_FLASH_FAULT_OVER_TEMPERATURE
 | |
| 				  | V4L2_FLASH_FAULT_SHORT_CIRCUIT
 | |
| 				  | V4L2_FLASH_FAULT_TIMEOUT, 0, 0);
 | |
| 	if (fault != NULL)
 | |
| 		fault->flags |= V4L2_CTRL_FLAG_VOLATILE;
 | |
| 
 | |
| 	if (hdl->error)
 | |
| 		return hdl->error;
 | |
| 
 | |
| 	flash->subdev_led[led_no].ctrl_handler = hdl;
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| /* initialize device */
 | |
| static const struct v4l2_subdev_ops lm3560_ops = {
 | |
| 	.core = NULL,
 | |
| };
 | |
| 
 | |
| static const struct regmap_config lm3560_regmap = {
 | |
| 	.reg_bits = 8,
 | |
| 	.val_bits = 8,
 | |
| 	.max_register = 0xFF,
 | |
| };
 | |
| 
 | |
| static int lm3560_subdev_init(struct lm3560_flash *flash,
 | |
| 			      enum lm3560_led_id led_no, char *led_name)
 | |
| {
 | |
| 	struct i2c_client *client = to_i2c_client(flash->dev);
 | |
| 	int rval;
 | |
| 
 | |
| 	v4l2_i2c_subdev_init(&flash->subdev_led[led_no], client, &lm3560_ops);
 | |
| 	flash->subdev_led[led_no].flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
 | |
| 	strcpy(flash->subdev_led[led_no].name, led_name);
 | |
| 	rval = lm3560_init_controls(flash, led_no);
 | |
| 	if (rval)
 | |
| 		goto err_out;
 | |
| 	rval = media_entity_init(&flash->subdev_led[led_no].entity, 0, NULL, 0);
 | |
| 	if (rval < 0)
 | |
| 		goto err_out;
 | |
| 	flash->subdev_led[led_no].entity.type = MEDIA_ENT_T_V4L2_SUBDEV_FLASH;
 | |
| 
 | |
| 	return rval;
 | |
| 
 | |
| err_out:
 | |
| 	v4l2_ctrl_handler_free(&flash->ctrls_led[led_no]);
 | |
| 	return rval;
 | |
| }
 | |
| 
 | |
| static int lm3560_init_device(struct lm3560_flash *flash)
 | |
| {
 | |
| 	int rval;
 | |
| 	unsigned int reg_val;
 | |
| 
 | |
| 	/* set peak current */
 | |
| 	rval = regmap_update_bits(flash->regmap,
 | |
| 				  REG_FLASH_TOUT, 0x60, flash->pdata->peak);
 | |
| 	if (rval < 0)
 | |
| 		return rval;
 | |
| 	/* output disable */
 | |
| 	flash->led_mode = V4L2_FLASH_LED_MODE_NONE;
 | |
| 	rval = lm3560_mode_ctrl(flash);
 | |
| 	if (rval < 0)
 | |
| 		return rval;
 | |
| 	/* reset faults */
 | |
| 	rval = regmap_read(flash->regmap, REG_FLAG, ®_val);
 | |
| 	return rval;
 | |
| }
 | |
| 
 | |
| static int lm3560_probe(struct i2c_client *client,
 | |
| 			const struct i2c_device_id *devid)
 | |
| {
 | |
| 	struct lm3560_flash *flash;
 | |
| 	struct lm3560_platform_data *pdata = dev_get_platdata(&client->dev);
 | |
| 	int rval;
 | |
| 
 | |
| 	flash = devm_kzalloc(&client->dev, sizeof(*flash), GFP_KERNEL);
 | |
| 	if (flash == NULL)
 | |
| 		return -ENOMEM;
 | |
| 
 | |
| 	flash->regmap = devm_regmap_init_i2c(client, &lm3560_regmap);
 | |
| 	if (IS_ERR(flash->regmap)) {
 | |
| 		rval = PTR_ERR(flash->regmap);
 | |
| 		return rval;
 | |
| 	}
 | |
| 
 | |
| 	/* if there is no platform data, use chip default value */
 | |
| 	if (pdata == NULL) {
 | |
| 		pdata = devm_kzalloc(&client->dev, sizeof(*pdata), GFP_KERNEL);
 | |
| 		if (pdata == NULL)
 | |
| 			return -ENODEV;
 | |
| 		pdata->peak = LM3560_PEAK_3600mA;
 | |
| 		pdata->max_flash_timeout = LM3560_FLASH_TOUT_MAX;
 | |
| 		/* led 1 */
 | |
| 		pdata->max_flash_brt[LM3560_LED0] = LM3560_FLASH_BRT_MAX;
 | |
| 		pdata->max_torch_brt[LM3560_LED0] = LM3560_TORCH_BRT_MAX;
 | |
| 		/* led 2 */
 | |
| 		pdata->max_flash_brt[LM3560_LED1] = LM3560_FLASH_BRT_MAX;
 | |
| 		pdata->max_torch_brt[LM3560_LED1] = LM3560_TORCH_BRT_MAX;
 | |
| 	}
 | |
| 	flash->pdata = pdata;
 | |
| 	flash->dev = &client->dev;
 | |
| 	mutex_init(&flash->lock);
 | |
| 
 | |
| 	rval = lm3560_subdev_init(flash, LM3560_LED0, "lm3560-led0");
 | |
| 	if (rval < 0)
 | |
| 		return rval;
 | |
| 
 | |
| 	rval = lm3560_subdev_init(flash, LM3560_LED1, "lm3560-led1");
 | |
| 	if (rval < 0)
 | |
| 		return rval;
 | |
| 
 | |
| 	rval = lm3560_init_device(flash);
 | |
| 	if (rval < 0)
 | |
| 		return rval;
 | |
| 
 | |
| 	i2c_set_clientdata(client, flash);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int lm3560_remove(struct i2c_client *client)
 | |
| {
 | |
| 	struct lm3560_flash *flash = i2c_get_clientdata(client);
 | |
| 	unsigned int i;
 | |
| 
 | |
| 	for (i = LM3560_LED0; i < LM3560_LED_MAX; i++) {
 | |
| 		v4l2_device_unregister_subdev(&flash->subdev_led[i]);
 | |
| 		v4l2_ctrl_handler_free(&flash->ctrls_led[i]);
 | |
| 		media_entity_cleanup(&flash->subdev_led[i].entity);
 | |
| 	}
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static const struct i2c_device_id lm3560_id_table[] = {
 | |
| 	{LM3560_NAME, 0},
 | |
| 	{}
 | |
| };
 | |
| 
 | |
| MODULE_DEVICE_TABLE(i2c, lm3560_id_table);
 | |
| 
 | |
| static struct i2c_driver lm3560_i2c_driver = {
 | |
| 	.driver = {
 | |
| 		   .name = LM3560_NAME,
 | |
| 		   .pm = NULL,
 | |
| 		   },
 | |
| 	.probe = lm3560_probe,
 | |
| 	.remove = lm3560_remove,
 | |
| 	.id_table = lm3560_id_table,
 | |
| };
 | |
| 
 | |
| module_i2c_driver(lm3560_i2c_driver);
 | |
| 
 | |
| MODULE_AUTHOR("Daniel Jeong <gshark.jeong@gmail.com>");
 | |
| MODULE_AUTHOR("Ldd Mlp <ldd-mlp@list.ti.com>");
 | |
| MODULE_DESCRIPTION("Texas Instruments LM3560 LED flash driver");
 | |
| MODULE_LICENSE("GPL");
 |