 8774bed9ce
			
		
	
	
	8774bed9ce
	
	
	
		
			
			The g_std and s_std operations are video-related, move them to the video ops where they belong. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
		
			
				
	
	
		
			650 lines
		
	
	
	
		
			17 KiB
			
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			650 lines
		
	
	
	
		
			17 KiB
			
		
	
	
	
		
			C
		
	
	
	
	
	
| /*
 | |
|  * adv7183.c Analog Devices ADV7183 video decoder driver
 | |
|  *
 | |
|  * Copyright (c) 2011 Analog Devices Inc.
 | |
|  *
 | |
|  * This program is free software; you can redistribute it and/or modify
 | |
|  * it under the terms of the GNU General Public License version 2 as
 | |
|  * published by the Free Software Foundation.
 | |
|  *
 | |
|  * This program is distributed in the hope that it will be useful,
 | |
|  * but WITHOUT ANY WARRANTY; without even the implied warranty of
 | |
|  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 | |
|  * GNU General Public License for more details.
 | |
|  *
 | |
|  * You should have received a copy of the GNU General Public License
 | |
|  * along with this program; if not, write to the Free Software
 | |
|  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 | |
|  */
 | |
| 
 | |
| #include <linux/delay.h>
 | |
| #include <linux/errno.h>
 | |
| #include <linux/gpio.h>
 | |
| #include <linux/i2c.h>
 | |
| #include <linux/init.h>
 | |
| #include <linux/module.h>
 | |
| #include <linux/slab.h>
 | |
| #include <linux/types.h>
 | |
| #include <linux/videodev2.h>
 | |
| 
 | |
| #include <media/adv7183.h>
 | |
| #include <media/v4l2-ctrls.h>
 | |
| #include <media/v4l2-device.h>
 | |
| 
 | |
| #include "adv7183_regs.h"
 | |
| 
 | |
| struct adv7183 {
 | |
| 	struct v4l2_subdev sd;
 | |
| 	struct v4l2_ctrl_handler hdl;
 | |
| 
 | |
| 	v4l2_std_id std; /* Current set standard */
 | |
| 	u32 input;
 | |
| 	u32 output;
 | |
| 	unsigned reset_pin;
 | |
| 	unsigned oe_pin;
 | |
| 	struct v4l2_mbus_framefmt fmt;
 | |
| };
 | |
| 
 | |
| /* EXAMPLES USING 27 MHz CLOCK
 | |
|  * Mode 1 CVBS Input (Composite Video on AIN5)
 | |
|  * All standards are supported through autodetect, 8-bit, 4:2:2, ITU-R BT.656 output on P15 to P8.
 | |
|  */
 | |
| static const unsigned char adv7183_init_regs[] = {
 | |
| 	ADV7183_IN_CTRL, 0x04,           /* CVBS input on AIN5 */
 | |
| 	ADV7183_DIGI_CLAMP_CTRL_1, 0x00, /* Slow down digital clamps */
 | |
| 	ADV7183_SHAP_FILT_CTRL, 0x41,    /* Set CSFM to SH1 */
 | |
| 	ADV7183_ADC_CTRL, 0x16,          /* Power down ADC 1 and ADC 2 */
 | |
| 	ADV7183_CTI_DNR_CTRL_4, 0x04,    /* Set DNR threshold to 4 for flat response */
 | |
| 	/* ADI recommended programming sequence */
 | |
| 	ADV7183_ADI_CTRL, 0x80,
 | |
| 	ADV7183_CTI_DNR_CTRL_4, 0x20,
 | |
| 	0x52, 0x18,
 | |
| 	0x58, 0xED,
 | |
| 	0x77, 0xC5,
 | |
| 	0x7C, 0x93,
 | |
| 	0x7D, 0x00,
 | |
| 	0xD0, 0x48,
 | |
| 	0xD5, 0xA0,
 | |
| 	0xD7, 0xEA,
 | |
| 	ADV7183_SD_SATURATION_CR, 0x3E,
 | |
| 	ADV7183_PAL_V_END, 0x3E,
 | |
| 	ADV7183_PAL_F_TOGGLE, 0x0F,
 | |
| 	ADV7183_ADI_CTRL, 0x00,
 | |
| };
 | |
| 
 | |
| static inline struct adv7183 *to_adv7183(struct v4l2_subdev *sd)
 | |
| {
 | |
| 	return container_of(sd, struct adv7183, sd);
 | |
| }
 | |
| static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl)
 | |
| {
 | |
| 	return &container_of(ctrl->handler, struct adv7183, hdl)->sd;
 | |
| }
 | |
| 
 | |
| static inline int adv7183_read(struct v4l2_subdev *sd, unsigned char reg)
 | |
| {
 | |
| 	struct i2c_client *client = v4l2_get_subdevdata(sd);
 | |
| 
 | |
| 	return i2c_smbus_read_byte_data(client, reg);
 | |
| }
 | |
| 
 | |
| static inline int adv7183_write(struct v4l2_subdev *sd, unsigned char reg,
 | |
| 				unsigned char value)
 | |
| {
 | |
| 	struct i2c_client *client = v4l2_get_subdevdata(sd);
 | |
| 
 | |
| 	return i2c_smbus_write_byte_data(client, reg, value);
 | |
| }
 | |
| 
 | |
| static int adv7183_writeregs(struct v4l2_subdev *sd,
 | |
| 		const unsigned char *regs, unsigned int num)
 | |
| {
 | |
| 	unsigned char reg, data;
 | |
| 	unsigned int cnt = 0;
 | |
| 
 | |
| 	if (num & 0x1) {
 | |
| 		v4l2_err(sd, "invalid regs array\n");
 | |
| 		return -1;
 | |
| 	}
 | |
| 
 | |
| 	while (cnt < num) {
 | |
| 		reg = *regs++;
 | |
| 		data = *regs++;
 | |
| 		cnt += 2;
 | |
| 
 | |
| 		adv7183_write(sd, reg, data);
 | |
| 	}
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int adv7183_log_status(struct v4l2_subdev *sd)
 | |
| {
 | |
| 	struct adv7183 *decoder = to_adv7183(sd);
 | |
| 
 | |
| 	v4l2_info(sd, "adv7183: Input control = 0x%02x\n",
 | |
| 			adv7183_read(sd, ADV7183_IN_CTRL));
 | |
| 	v4l2_info(sd, "adv7183: Video selection = 0x%02x\n",
 | |
| 			adv7183_read(sd, ADV7183_VD_SEL));
 | |
| 	v4l2_info(sd, "adv7183: Output control = 0x%02x\n",
 | |
| 			adv7183_read(sd, ADV7183_OUT_CTRL));
 | |
| 	v4l2_info(sd, "adv7183: Extended output control = 0x%02x\n",
 | |
| 			adv7183_read(sd, ADV7183_EXT_OUT_CTRL));
 | |
| 	v4l2_info(sd, "adv7183: Autodetect enable = 0x%02x\n",
 | |
| 			adv7183_read(sd, ADV7183_AUTO_DET_EN));
 | |
| 	v4l2_info(sd, "adv7183: Contrast = 0x%02x\n",
 | |
| 			adv7183_read(sd, ADV7183_CONTRAST));
 | |
| 	v4l2_info(sd, "adv7183: Brightness = 0x%02x\n",
 | |
| 			adv7183_read(sd, ADV7183_BRIGHTNESS));
 | |
| 	v4l2_info(sd, "adv7183: Hue = 0x%02x\n",
 | |
| 			adv7183_read(sd, ADV7183_HUE));
 | |
| 	v4l2_info(sd, "adv7183: Default value Y = 0x%02x\n",
 | |
| 			adv7183_read(sd, ADV7183_DEF_Y));
 | |
| 	v4l2_info(sd, "adv7183: Default value C = 0x%02x\n",
 | |
| 			adv7183_read(sd, ADV7183_DEF_C));
 | |
| 	v4l2_info(sd, "adv7183: ADI control = 0x%02x\n",
 | |
| 			adv7183_read(sd, ADV7183_ADI_CTRL));
 | |
| 	v4l2_info(sd, "adv7183: Power Management = 0x%02x\n",
 | |
| 			adv7183_read(sd, ADV7183_POW_MANAGE));
 | |
| 	v4l2_info(sd, "adv7183: Status 1 2 and 3 = 0x%02x 0x%02x 0x%02x\n",
 | |
| 			adv7183_read(sd, ADV7183_STATUS_1),
 | |
| 			adv7183_read(sd, ADV7183_STATUS_2),
 | |
| 			adv7183_read(sd, ADV7183_STATUS_3));
 | |
| 	v4l2_info(sd, "adv7183: Ident = 0x%02x\n",
 | |
| 			adv7183_read(sd, ADV7183_IDENT));
 | |
| 	v4l2_info(sd, "adv7183: Analog clamp control = 0x%02x\n",
 | |
| 			adv7183_read(sd, ADV7183_ANAL_CLAMP_CTRL));
 | |
| 	v4l2_info(sd, "adv7183: Digital clamp control 1 = 0x%02x\n",
 | |
| 			adv7183_read(sd, ADV7183_DIGI_CLAMP_CTRL_1));
 | |
| 	v4l2_info(sd, "adv7183: Shaping filter control 1 and 2 = 0x%02x 0x%02x\n",
 | |
| 			adv7183_read(sd, ADV7183_SHAP_FILT_CTRL),
 | |
| 			adv7183_read(sd, ADV7183_SHAP_FILT_CTRL_2));
 | |
| 	v4l2_info(sd, "adv7183: Comb filter control = 0x%02x\n",
 | |
| 			adv7183_read(sd, ADV7183_COMB_FILT_CTRL));
 | |
| 	v4l2_info(sd, "adv7183: ADI control 2 = 0x%02x\n",
 | |
| 			adv7183_read(sd, ADV7183_ADI_CTRL_2));
 | |
| 	v4l2_info(sd, "adv7183: Pixel delay control = 0x%02x\n",
 | |
| 			adv7183_read(sd, ADV7183_PIX_DELAY_CTRL));
 | |
| 	v4l2_info(sd, "adv7183: Misc gain control = 0x%02x\n",
 | |
| 			adv7183_read(sd, ADV7183_MISC_GAIN_CTRL));
 | |
| 	v4l2_info(sd, "adv7183: AGC mode control = 0x%02x\n",
 | |
| 			adv7183_read(sd, ADV7183_AGC_MODE_CTRL));
 | |
| 	v4l2_info(sd, "adv7183: Chroma gain control 1 and 2 = 0x%02x 0x%02x\n",
 | |
| 			adv7183_read(sd, ADV7183_CHRO_GAIN_CTRL_1),
 | |
| 			adv7183_read(sd, ADV7183_CHRO_GAIN_CTRL_2));
 | |
| 	v4l2_info(sd, "adv7183: Luma gain control 1 and 2 = 0x%02x 0x%02x\n",
 | |
| 			adv7183_read(sd, ADV7183_LUMA_GAIN_CTRL_1),
 | |
| 			adv7183_read(sd, ADV7183_LUMA_GAIN_CTRL_2));
 | |
| 	v4l2_info(sd, "adv7183: Vsync field control 1 2 and 3 = 0x%02x 0x%02x 0x%02x\n",
 | |
| 			adv7183_read(sd, ADV7183_VS_FIELD_CTRL_1),
 | |
| 			adv7183_read(sd, ADV7183_VS_FIELD_CTRL_2),
 | |
| 			adv7183_read(sd, ADV7183_VS_FIELD_CTRL_3));
 | |
| 	v4l2_info(sd, "adv7183: Hsync position control 1 2 and 3 = 0x%02x 0x%02x 0x%02x\n",
 | |
| 			adv7183_read(sd, ADV7183_HS_POS_CTRL_1),
 | |
| 			adv7183_read(sd, ADV7183_HS_POS_CTRL_2),
 | |
| 			adv7183_read(sd, ADV7183_HS_POS_CTRL_3));
 | |
| 	v4l2_info(sd, "adv7183: Polarity = 0x%02x\n",
 | |
| 			adv7183_read(sd, ADV7183_POLARITY));
 | |
| 	v4l2_info(sd, "adv7183: ADC control = 0x%02x\n",
 | |
| 			adv7183_read(sd, ADV7183_ADC_CTRL));
 | |
| 	v4l2_info(sd, "adv7183: SD offset Cb and Cr = 0x%02x 0x%02x\n",
 | |
| 			adv7183_read(sd, ADV7183_SD_OFFSET_CB),
 | |
| 			adv7183_read(sd, ADV7183_SD_OFFSET_CR));
 | |
| 	v4l2_info(sd, "adv7183: SD saturation Cb and Cr = 0x%02x 0x%02x\n",
 | |
| 			adv7183_read(sd, ADV7183_SD_SATURATION_CB),
 | |
| 			adv7183_read(sd, ADV7183_SD_SATURATION_CR));
 | |
| 	v4l2_info(sd, "adv7183: Drive strength = 0x%02x\n",
 | |
| 			adv7183_read(sd, ADV7183_DRIVE_STR));
 | |
| 	v4l2_ctrl_handler_log_status(&decoder->hdl, sd->name);
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int adv7183_g_std(struct v4l2_subdev *sd, v4l2_std_id *std)
 | |
| {
 | |
| 	struct adv7183 *decoder = to_adv7183(sd);
 | |
| 
 | |
| 	*std = decoder->std;
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int adv7183_s_std(struct v4l2_subdev *sd, v4l2_std_id std)
 | |
| {
 | |
| 	struct adv7183 *decoder = to_adv7183(sd);
 | |
| 	int reg;
 | |
| 
 | |
| 	reg = adv7183_read(sd, ADV7183_IN_CTRL) & 0xF;
 | |
| 	if (std == V4L2_STD_PAL_60)
 | |
| 		reg |= 0x60;
 | |
| 	else if (std == V4L2_STD_NTSC_443)
 | |
| 		reg |= 0x70;
 | |
| 	else if (std == V4L2_STD_PAL_N)
 | |
| 		reg |= 0x90;
 | |
| 	else if (std == V4L2_STD_PAL_M)
 | |
| 		reg |= 0xA0;
 | |
| 	else if (std == V4L2_STD_PAL_Nc)
 | |
| 		reg |= 0xC0;
 | |
| 	else if (std & V4L2_STD_PAL)
 | |
| 		reg |= 0x80;
 | |
| 	else if (std & V4L2_STD_NTSC)
 | |
| 		reg |= 0x50;
 | |
| 	else if (std & V4L2_STD_SECAM)
 | |
| 		reg |= 0xE0;
 | |
| 	else
 | |
| 		return -EINVAL;
 | |
| 	adv7183_write(sd, ADV7183_IN_CTRL, reg);
 | |
| 
 | |
| 	decoder->std = std;
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int adv7183_reset(struct v4l2_subdev *sd, u32 val)
 | |
| {
 | |
| 	int reg;
 | |
| 
 | |
| 	reg = adv7183_read(sd, ADV7183_POW_MANAGE) | 0x80;
 | |
| 	adv7183_write(sd, ADV7183_POW_MANAGE, reg);
 | |
| 	/* wait 5ms before any further i2c writes are performed */
 | |
| 	usleep_range(5000, 10000);
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int adv7183_s_routing(struct v4l2_subdev *sd,
 | |
| 				u32 input, u32 output, u32 config)
 | |
| {
 | |
| 	struct adv7183 *decoder = to_adv7183(sd);
 | |
| 	int reg;
 | |
| 
 | |
| 	if ((input > ADV7183_COMPONENT1) || (output > ADV7183_16BIT_OUT))
 | |
| 		return -EINVAL;
 | |
| 
 | |
| 	if (input != decoder->input) {
 | |
| 		decoder->input = input;
 | |
| 		reg = adv7183_read(sd, ADV7183_IN_CTRL) & 0xF0;
 | |
| 		switch (input) {
 | |
| 		case ADV7183_COMPOSITE1:
 | |
| 			reg |= 0x1;
 | |
| 			break;
 | |
| 		case ADV7183_COMPOSITE2:
 | |
| 			reg |= 0x2;
 | |
| 			break;
 | |
| 		case ADV7183_COMPOSITE3:
 | |
| 			reg |= 0x3;
 | |
| 			break;
 | |
| 		case ADV7183_COMPOSITE4:
 | |
| 			reg |= 0x4;
 | |
| 			break;
 | |
| 		case ADV7183_COMPOSITE5:
 | |
| 			reg |= 0x5;
 | |
| 			break;
 | |
| 		case ADV7183_COMPOSITE6:
 | |
| 			reg |= 0xB;
 | |
| 			break;
 | |
| 		case ADV7183_COMPOSITE7:
 | |
| 			reg |= 0xC;
 | |
| 			break;
 | |
| 		case ADV7183_COMPOSITE8:
 | |
| 			reg |= 0xD;
 | |
| 			break;
 | |
| 		case ADV7183_COMPOSITE9:
 | |
| 			reg |= 0xE;
 | |
| 			break;
 | |
| 		case ADV7183_COMPOSITE10:
 | |
| 			reg |= 0xF;
 | |
| 			break;
 | |
| 		case ADV7183_SVIDEO0:
 | |
| 			reg |= 0x6;
 | |
| 			break;
 | |
| 		case ADV7183_SVIDEO1:
 | |
| 			reg |= 0x7;
 | |
| 			break;
 | |
| 		case ADV7183_SVIDEO2:
 | |
| 			reg |= 0x8;
 | |
| 			break;
 | |
| 		case ADV7183_COMPONENT0:
 | |
| 			reg |= 0x9;
 | |
| 			break;
 | |
| 		case ADV7183_COMPONENT1:
 | |
| 			reg |= 0xA;
 | |
| 			break;
 | |
| 		default:
 | |
| 			break;
 | |
| 		}
 | |
| 		adv7183_write(sd, ADV7183_IN_CTRL, reg);
 | |
| 	}
 | |
| 
 | |
| 	if (output != decoder->output) {
 | |
| 		decoder->output = output;
 | |
| 		reg = adv7183_read(sd, ADV7183_OUT_CTRL) & 0xC0;
 | |
| 		switch (output) {
 | |
| 		case ADV7183_16BIT_OUT:
 | |
| 			reg |= 0x9;
 | |
| 			break;
 | |
| 		default:
 | |
| 			reg |= 0xC;
 | |
| 			break;
 | |
| 		}
 | |
| 		adv7183_write(sd, ADV7183_OUT_CTRL, reg);
 | |
| 	}
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int adv7183_s_ctrl(struct v4l2_ctrl *ctrl)
 | |
| {
 | |
| 	struct v4l2_subdev *sd = to_sd(ctrl);
 | |
| 	int val = ctrl->val;
 | |
| 
 | |
| 	switch (ctrl->id) {
 | |
| 	case V4L2_CID_BRIGHTNESS:
 | |
| 		if (val < 0)
 | |
| 			val = 127 - val;
 | |
| 		adv7183_write(sd, ADV7183_BRIGHTNESS, val);
 | |
| 		break;
 | |
| 	case V4L2_CID_CONTRAST:
 | |
| 		adv7183_write(sd, ADV7183_CONTRAST, val);
 | |
| 		break;
 | |
| 	case V4L2_CID_SATURATION:
 | |
| 		adv7183_write(sd, ADV7183_SD_SATURATION_CB, val >> 8);
 | |
| 		adv7183_write(sd, ADV7183_SD_SATURATION_CR, (val & 0xFF));
 | |
| 		break;
 | |
| 	case V4L2_CID_HUE:
 | |
| 		adv7183_write(sd, ADV7183_SD_OFFSET_CB, val >> 8);
 | |
| 		adv7183_write(sd, ADV7183_SD_OFFSET_CR, (val & 0xFF));
 | |
| 		break;
 | |
| 	default:
 | |
| 		return -EINVAL;
 | |
| 	}
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int adv7183_querystd(struct v4l2_subdev *sd, v4l2_std_id *std)
 | |
| {
 | |
| 	struct adv7183 *decoder = to_adv7183(sd);
 | |
| 	int reg;
 | |
| 
 | |
| 	/* enable autodetection block */
 | |
| 	reg = adv7183_read(sd, ADV7183_IN_CTRL) & 0xF;
 | |
| 	adv7183_write(sd, ADV7183_IN_CTRL, reg);
 | |
| 
 | |
| 	/* wait autodetection switch */
 | |
| 	mdelay(10);
 | |
| 
 | |
| 	/* get autodetection result */
 | |
| 	reg = adv7183_read(sd, ADV7183_STATUS_1);
 | |
| 	switch ((reg >> 0x4) & 0x7) {
 | |
| 	case 0:
 | |
| 		*std &= V4L2_STD_NTSC;
 | |
| 		break;
 | |
| 	case 1:
 | |
| 		*std &= V4L2_STD_NTSC_443;
 | |
| 		break;
 | |
| 	case 2:
 | |
| 		*std &= V4L2_STD_PAL_M;
 | |
| 		break;
 | |
| 	case 3:
 | |
| 		*std &= V4L2_STD_PAL_60;
 | |
| 		break;
 | |
| 	case 4:
 | |
| 		*std &= V4L2_STD_PAL;
 | |
| 		break;
 | |
| 	case 5:
 | |
| 		*std &= V4L2_STD_SECAM;
 | |
| 		break;
 | |
| 	case 6:
 | |
| 		*std &= V4L2_STD_PAL_Nc;
 | |
| 		break;
 | |
| 	case 7:
 | |
| 		*std &= V4L2_STD_SECAM;
 | |
| 		break;
 | |
| 	default:
 | |
| 		*std = V4L2_STD_UNKNOWN;
 | |
| 		break;
 | |
| 	}
 | |
| 
 | |
| 	/* after std detection, write back user set std */
 | |
| 	adv7183_s_std(sd, decoder->std);
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int adv7183_g_input_status(struct v4l2_subdev *sd, u32 *status)
 | |
| {
 | |
| 	int reg;
 | |
| 
 | |
| 	*status = V4L2_IN_ST_NO_SIGNAL;
 | |
| 	reg = adv7183_read(sd, ADV7183_STATUS_1);
 | |
| 	if (reg < 0)
 | |
| 		return reg;
 | |
| 	if (reg & 0x1)
 | |
| 		*status = 0;
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int adv7183_enum_mbus_fmt(struct v4l2_subdev *sd, unsigned index,
 | |
| 				enum v4l2_mbus_pixelcode *code)
 | |
| {
 | |
| 	if (index > 0)
 | |
| 		return -EINVAL;
 | |
| 
 | |
| 	*code = V4L2_MBUS_FMT_UYVY8_2X8;
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int adv7183_try_mbus_fmt(struct v4l2_subdev *sd,
 | |
| 				struct v4l2_mbus_framefmt *fmt)
 | |
| {
 | |
| 	struct adv7183 *decoder = to_adv7183(sd);
 | |
| 
 | |
| 	fmt->code = V4L2_MBUS_FMT_UYVY8_2X8;
 | |
| 	fmt->colorspace = V4L2_COLORSPACE_SMPTE170M;
 | |
| 	if (decoder->std & V4L2_STD_525_60) {
 | |
| 		fmt->field = V4L2_FIELD_SEQ_TB;
 | |
| 		fmt->width = 720;
 | |
| 		fmt->height = 480;
 | |
| 	} else {
 | |
| 		fmt->field = V4L2_FIELD_SEQ_BT;
 | |
| 		fmt->width = 720;
 | |
| 		fmt->height = 576;
 | |
| 	}
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int adv7183_s_mbus_fmt(struct v4l2_subdev *sd,
 | |
| 				struct v4l2_mbus_framefmt *fmt)
 | |
| {
 | |
| 	struct adv7183 *decoder = to_adv7183(sd);
 | |
| 
 | |
| 	adv7183_try_mbus_fmt(sd, fmt);
 | |
| 	decoder->fmt = *fmt;
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int adv7183_g_mbus_fmt(struct v4l2_subdev *sd,
 | |
| 				struct v4l2_mbus_framefmt *fmt)
 | |
| {
 | |
| 	struct adv7183 *decoder = to_adv7183(sd);
 | |
| 
 | |
| 	*fmt = decoder->fmt;
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int adv7183_s_stream(struct v4l2_subdev *sd, int enable)
 | |
| {
 | |
| 	struct adv7183 *decoder = to_adv7183(sd);
 | |
| 
 | |
| 	if (enable)
 | |
| 		gpio_set_value(decoder->oe_pin, 0);
 | |
| 	else
 | |
| 		gpio_set_value(decoder->oe_pin, 1);
 | |
| 	udelay(1);
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| #ifdef CONFIG_VIDEO_ADV_DEBUG
 | |
| static int adv7183_g_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg)
 | |
| {
 | |
| 	reg->val = adv7183_read(sd, reg->reg & 0xff);
 | |
| 	reg->size = 1;
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int adv7183_s_register(struct v4l2_subdev *sd, const struct v4l2_dbg_register *reg)
 | |
| {
 | |
| 	adv7183_write(sd, reg->reg & 0xff, reg->val & 0xff);
 | |
| 	return 0;
 | |
| }
 | |
| #endif
 | |
| 
 | |
| static const struct v4l2_ctrl_ops adv7183_ctrl_ops = {
 | |
| 	.s_ctrl = adv7183_s_ctrl,
 | |
| };
 | |
| 
 | |
| static const struct v4l2_subdev_core_ops adv7183_core_ops = {
 | |
| 	.log_status = adv7183_log_status,
 | |
| 	.reset = adv7183_reset,
 | |
| #ifdef CONFIG_VIDEO_ADV_DEBUG
 | |
| 	.g_register = adv7183_g_register,
 | |
| 	.s_register = adv7183_s_register,
 | |
| #endif
 | |
| };
 | |
| 
 | |
| static const struct v4l2_subdev_video_ops adv7183_video_ops = {
 | |
| 	.g_std = adv7183_g_std,
 | |
| 	.s_std = adv7183_s_std,
 | |
| 	.s_routing = adv7183_s_routing,
 | |
| 	.querystd = adv7183_querystd,
 | |
| 	.g_input_status = adv7183_g_input_status,
 | |
| 	.enum_mbus_fmt = adv7183_enum_mbus_fmt,
 | |
| 	.try_mbus_fmt = adv7183_try_mbus_fmt,
 | |
| 	.s_mbus_fmt = adv7183_s_mbus_fmt,
 | |
| 	.g_mbus_fmt = adv7183_g_mbus_fmt,
 | |
| 	.s_stream = adv7183_s_stream,
 | |
| };
 | |
| 
 | |
| static const struct v4l2_subdev_ops adv7183_ops = {
 | |
| 	.core = &adv7183_core_ops,
 | |
| 	.video = &adv7183_video_ops,
 | |
| };
 | |
| 
 | |
| static int adv7183_probe(struct i2c_client *client,
 | |
| 			const struct i2c_device_id *id)
 | |
| {
 | |
| 	struct adv7183 *decoder;
 | |
| 	struct v4l2_subdev *sd;
 | |
| 	struct v4l2_ctrl_handler *hdl;
 | |
| 	int ret;
 | |
| 	struct v4l2_mbus_framefmt fmt;
 | |
| 	const unsigned *pin_array;
 | |
| 
 | |
| 	/* Check if the adapter supports the needed features */
 | |
| 	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
 | |
| 		return -EIO;
 | |
| 
 | |
| 	v4l_info(client, "chip found @ 0x%02x (%s)\n",
 | |
| 			client->addr << 1, client->adapter->name);
 | |
| 
 | |
| 	pin_array = client->dev.platform_data;
 | |
| 	if (pin_array == NULL)
 | |
| 		return -EINVAL;
 | |
| 
 | |
| 	decoder = devm_kzalloc(&client->dev, sizeof(*decoder), GFP_KERNEL);
 | |
| 	if (decoder == NULL)
 | |
| 		return -ENOMEM;
 | |
| 
 | |
| 	decoder->reset_pin = pin_array[0];
 | |
| 	decoder->oe_pin = pin_array[1];
 | |
| 
 | |
| 	if (devm_gpio_request_one(&client->dev, decoder->reset_pin,
 | |
| 				  GPIOF_OUT_INIT_LOW, "ADV7183 Reset")) {
 | |
| 		v4l_err(client, "failed to request GPIO %d\n", decoder->reset_pin);
 | |
| 		return -EBUSY;
 | |
| 	}
 | |
| 
 | |
| 	if (devm_gpio_request_one(&client->dev, decoder->oe_pin,
 | |
| 				  GPIOF_OUT_INIT_HIGH,
 | |
| 				  "ADV7183 Output Enable")) {
 | |
| 		v4l_err(client, "failed to request GPIO %d\n", decoder->oe_pin);
 | |
| 		return -EBUSY;
 | |
| 	}
 | |
| 
 | |
| 	sd = &decoder->sd;
 | |
| 	v4l2_i2c_subdev_init(sd, client, &adv7183_ops);
 | |
| 
 | |
| 	hdl = &decoder->hdl;
 | |
| 	v4l2_ctrl_handler_init(hdl, 4);
 | |
| 	v4l2_ctrl_new_std(hdl, &adv7183_ctrl_ops,
 | |
| 			V4L2_CID_BRIGHTNESS, -128, 127, 1, 0);
 | |
| 	v4l2_ctrl_new_std(hdl, &adv7183_ctrl_ops,
 | |
| 			V4L2_CID_CONTRAST, 0, 0xFF, 1, 0x80);
 | |
| 	v4l2_ctrl_new_std(hdl, &adv7183_ctrl_ops,
 | |
| 			V4L2_CID_SATURATION, 0, 0xFFFF, 1, 0x8080);
 | |
| 	v4l2_ctrl_new_std(hdl, &adv7183_ctrl_ops,
 | |
| 			V4L2_CID_HUE, 0, 0xFFFF, 1, 0x8080);
 | |
| 	/* hook the control handler into the driver */
 | |
| 	sd->ctrl_handler = hdl;
 | |
| 	if (hdl->error) {
 | |
| 		ret = hdl->error;
 | |
| 
 | |
| 		v4l2_ctrl_handler_free(hdl);
 | |
| 		return ret;
 | |
| 	}
 | |
| 
 | |
| 	/* v4l2 doesn't support an autodetect standard, pick PAL as default */
 | |
| 	decoder->std = V4L2_STD_PAL;
 | |
| 	decoder->input = ADV7183_COMPOSITE4;
 | |
| 	decoder->output = ADV7183_8BIT_OUT;
 | |
| 
 | |
| 	/* reset chip */
 | |
| 	/* reset pulse width at least 5ms */
 | |
| 	mdelay(10);
 | |
| 	gpio_set_value(decoder->reset_pin, 1);
 | |
| 	/* wait 5ms before any further i2c writes are performed */
 | |
| 	mdelay(5);
 | |
| 
 | |
| 	adv7183_writeregs(sd, adv7183_init_regs, ARRAY_SIZE(adv7183_init_regs));
 | |
| 	adv7183_s_std(sd, decoder->std);
 | |
| 	fmt.width = 720;
 | |
| 	fmt.height = 576;
 | |
| 	adv7183_s_mbus_fmt(sd, &fmt);
 | |
| 
 | |
| 	/* initialize the hardware to the default control values */
 | |
| 	ret = v4l2_ctrl_handler_setup(hdl);
 | |
| 	if (ret) {
 | |
| 		v4l2_ctrl_handler_free(hdl);
 | |
| 		return ret;
 | |
| 	}
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int adv7183_remove(struct i2c_client *client)
 | |
| {
 | |
| 	struct v4l2_subdev *sd = i2c_get_clientdata(client);
 | |
| 
 | |
| 	v4l2_device_unregister_subdev(sd);
 | |
| 	v4l2_ctrl_handler_free(sd->ctrl_handler);
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static const struct i2c_device_id adv7183_id[] = {
 | |
| 	{"adv7183", 0},
 | |
| 	{},
 | |
| };
 | |
| 
 | |
| MODULE_DEVICE_TABLE(i2c, adv7183_id);
 | |
| 
 | |
| static struct i2c_driver adv7183_driver = {
 | |
| 	.driver = {
 | |
| 		.owner  = THIS_MODULE,
 | |
| 		.name   = "adv7183",
 | |
| 	},
 | |
| 	.probe          = adv7183_probe,
 | |
| 	.remove         = adv7183_remove,
 | |
| 	.id_table       = adv7183_id,
 | |
| };
 | |
| 
 | |
| module_i2c_driver(adv7183_driver);
 | |
| 
 | |
| MODULE_DESCRIPTION("Analog Devices ADV7183 video decoder driver");
 | |
| MODULE_AUTHOR("Scott Jiang <Scott.Jiang.Linux@gmail.com>");
 | |
| MODULE_LICENSE("GPL v2");
 |