The site-specific OOM messages are unnecessary, because they duplicate the MM subsystem generic OOM message. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
		
			
				
	
	
		
			1353 lines
		
	
	
	
		
			40 KiB
			
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			1353 lines
		
	
	
	
		
			40 KiB
			
		
	
	
	
		
			C
		
	
	
	
	
	
/*
 | 
						|
 *  pc87427.c - hardware monitoring driver for the
 | 
						|
 *              National Semiconductor PC87427 Super-I/O chip
 | 
						|
 *  Copyright (C) 2006, 2008, 2010  Jean Delvare <jdelvare@suse.de>
 | 
						|
 *
 | 
						|
 *  This program is free software; you can redistribute it and/or modify
 | 
						|
 *  it under the terms of the GNU General Public License version 2 as
 | 
						|
 *  published by the Free Software Foundation.
 | 
						|
 *
 | 
						|
 *  This program is distributed in the hope that it will be useful,
 | 
						|
 *  but WITHOUT ANY WARRANTY; without even the implied warranty of
 | 
						|
 *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 | 
						|
 *  GNU General Public License for more details.
 | 
						|
 *
 | 
						|
 *  Supports the following chips:
 | 
						|
 *
 | 
						|
 *  Chip        #vin    #fan    #pwm    #temp   devid
 | 
						|
 *  PC87427     -       8       4       6       0xF2
 | 
						|
 *
 | 
						|
 *  This driver assumes that no more than one chip is present.
 | 
						|
 *  Only fans are fully supported so far. Temperatures are in read-only
 | 
						|
 *  mode, and voltages aren't supported at all.
 | 
						|
 */
 | 
						|
 | 
						|
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 | 
						|
 | 
						|
#include <linux/module.h>
 | 
						|
#include <linux/init.h>
 | 
						|
#include <linux/slab.h>
 | 
						|
#include <linux/jiffies.h>
 | 
						|
#include <linux/platform_device.h>
 | 
						|
#include <linux/hwmon.h>
 | 
						|
#include <linux/hwmon-sysfs.h>
 | 
						|
#include <linux/err.h>
 | 
						|
#include <linux/mutex.h>
 | 
						|
#include <linux/sysfs.h>
 | 
						|
#include <linux/ioport.h>
 | 
						|
#include <linux/acpi.h>
 | 
						|
#include <linux/io.h>
 | 
						|
 | 
						|
static unsigned short force_id;
 | 
						|
module_param(force_id, ushort, 0);
 | 
						|
MODULE_PARM_DESC(force_id, "Override the detected device ID");
 | 
						|
 | 
						|
static struct platform_device *pdev;
 | 
						|
 | 
						|
#define DRVNAME "pc87427"
 | 
						|
 | 
						|
/*
 | 
						|
 * The lock mutex protects both the I/O accesses (needed because the
 | 
						|
 * device is using banked registers) and the register cache (needed to keep
 | 
						|
 * the data in the registers and the cache in sync at any time).
 | 
						|
 */
 | 
						|
struct pc87427_data {
 | 
						|
	struct device *hwmon_dev;
 | 
						|
	struct mutex lock;
 | 
						|
	int address[2];
 | 
						|
	const char *name;
 | 
						|
 | 
						|
	unsigned long last_updated;	/* in jiffies */
 | 
						|
	u8 fan_enabled;			/* bit vector */
 | 
						|
	u16 fan[8];			/* register values */
 | 
						|
	u16 fan_min[8];			/* register values */
 | 
						|
	u8 fan_status[8];		/* register values */
 | 
						|
 | 
						|
	u8 pwm_enabled;			/* bit vector */
 | 
						|
	u8 pwm_auto_ok;			/* bit vector */
 | 
						|
	u8 pwm_enable[4];		/* register values */
 | 
						|
	u8 pwm[4];			/* register values */
 | 
						|
 | 
						|
	u8 temp_enabled;		/* bit vector */
 | 
						|
	s16 temp[6];			/* register values */
 | 
						|
	s8 temp_min[6];			/* register values */
 | 
						|
	s8 temp_max[6];			/* register values */
 | 
						|
	s8 temp_crit[6];		/* register values */
 | 
						|
	u8 temp_status[6];		/* register values */
 | 
						|
	u8 temp_type[6];		/* register values */
 | 
						|
};
 | 
						|
 | 
						|
struct pc87427_sio_data {
 | 
						|
	unsigned short address[2];
 | 
						|
	u8 has_fanin;
 | 
						|
	u8 has_fanout;
 | 
						|
};
 | 
						|
 | 
						|
/*
 | 
						|
 * Super-I/O registers and operations
 | 
						|
 */
 | 
						|
 | 
						|
#define SIOREG_LDSEL	0x07	/* Logical device select */
 | 
						|
#define SIOREG_DEVID	0x20	/* Device ID */
 | 
						|
#define SIOREG_CF2	0x22	/* Configuration 2 */
 | 
						|
#define SIOREG_CF3	0x23	/* Configuration 3 */
 | 
						|
#define SIOREG_CF4	0x24	/* Configuration 4 */
 | 
						|
#define SIOREG_CF5	0x25	/* Configuration 5 */
 | 
						|
#define SIOREG_CFB	0x2B	/* Configuration B */
 | 
						|
#define SIOREG_CFC	0x2C	/* Configuration C */
 | 
						|
#define SIOREG_CFD	0x2D	/* Configuration D */
 | 
						|
#define SIOREG_ACT	0x30	/* Device activation */
 | 
						|
#define SIOREG_MAP	0x50	/* I/O or memory mapping */
 | 
						|
#define SIOREG_IOBASE	0x60	/* I/O base address */
 | 
						|
 | 
						|
static const u8 logdev[2] = { 0x09, 0x14 };
 | 
						|
static const char *logdev_str[2] = { DRVNAME " FMC", DRVNAME " HMC" };
 | 
						|
#define LD_FAN		0
 | 
						|
#define LD_IN		1
 | 
						|
#define LD_TEMP		1
 | 
						|
 | 
						|
static inline void superio_outb(int sioaddr, int reg, int val)
 | 
						|
{
 | 
						|
	outb(reg, sioaddr);
 | 
						|
	outb(val, sioaddr + 1);
 | 
						|
}
 | 
						|
 | 
						|
static inline int superio_inb(int sioaddr, int reg)
 | 
						|
{
 | 
						|
	outb(reg, sioaddr);
 | 
						|
	return inb(sioaddr + 1);
 | 
						|
}
 | 
						|
 | 
						|
static inline void superio_exit(int sioaddr)
 | 
						|
{
 | 
						|
	outb(0x02, sioaddr);
 | 
						|
	outb(0x02, sioaddr + 1);
 | 
						|
}
 | 
						|
 | 
						|
/*
 | 
						|
 * Logical devices
 | 
						|
 */
 | 
						|
 | 
						|
#define REGION_LENGTH		32
 | 
						|
#define PC87427_REG_BANK	0x0f
 | 
						|
#define BANK_FM(nr)		(nr)
 | 
						|
#define BANK_FT(nr)		(0x08 + (nr))
 | 
						|
#define BANK_FC(nr)		(0x10 + (nr) * 2)
 | 
						|
#define BANK_TM(nr)		(nr)
 | 
						|
#define BANK_VM(nr)		(0x08 + (nr))
 | 
						|
 | 
						|
/*
 | 
						|
 * I/O access functions
 | 
						|
 */
 | 
						|
 | 
						|
/* ldi is the logical device index */
 | 
						|
static inline int pc87427_read8(struct pc87427_data *data, u8 ldi, u8 reg)
 | 
						|
{
 | 
						|
	return inb(data->address[ldi] + reg);
 | 
						|
}
 | 
						|
 | 
						|
/* Must be called with data->lock held, except during init */
 | 
						|
static inline int pc87427_read8_bank(struct pc87427_data *data, u8 ldi,
 | 
						|
				     u8 bank, u8 reg)
 | 
						|
{
 | 
						|
	outb(bank, data->address[ldi] + PC87427_REG_BANK);
 | 
						|
	return inb(data->address[ldi] + reg);
 | 
						|
}
 | 
						|
 | 
						|
/* Must be called with data->lock held, except during init */
 | 
						|
static inline void pc87427_write8_bank(struct pc87427_data *data, u8 ldi,
 | 
						|
				       u8 bank, u8 reg, u8 value)
 | 
						|
{
 | 
						|
	outb(bank, data->address[ldi] + PC87427_REG_BANK);
 | 
						|
	outb(value, data->address[ldi] + reg);
 | 
						|
}
 | 
						|
 | 
						|
/*
 | 
						|
 * Fan registers and conversions
 | 
						|
 */
 | 
						|
 | 
						|
/* fan data registers are 16-bit wide */
 | 
						|
#define PC87427_REG_FAN			0x12
 | 
						|
#define PC87427_REG_FAN_MIN		0x14
 | 
						|
#define PC87427_REG_FAN_STATUS		0x10
 | 
						|
 | 
						|
#define FAN_STATUS_STALL		(1 << 3)
 | 
						|
#define FAN_STATUS_LOSPD		(1 << 1)
 | 
						|
#define FAN_STATUS_MONEN		(1 << 0)
 | 
						|
 | 
						|
/*
 | 
						|
 * Dedicated function to read all registers related to a given fan input.
 | 
						|
 * This saves us quite a few locks and bank selections.
 | 
						|
 * Must be called with data->lock held.
 | 
						|
 * nr is from 0 to 7
 | 
						|
 */
 | 
						|
static void pc87427_readall_fan(struct pc87427_data *data, u8 nr)
 | 
						|
{
 | 
						|
	int iobase = data->address[LD_FAN];
 | 
						|
 | 
						|
	outb(BANK_FM(nr), iobase + PC87427_REG_BANK);
 | 
						|
	data->fan[nr] = inw(iobase + PC87427_REG_FAN);
 | 
						|
	data->fan_min[nr] = inw(iobase + PC87427_REG_FAN_MIN);
 | 
						|
	data->fan_status[nr] = inb(iobase + PC87427_REG_FAN_STATUS);
 | 
						|
	/* Clear fan alarm bits */
 | 
						|
	outb(data->fan_status[nr], iobase + PC87427_REG_FAN_STATUS);
 | 
						|
}
 | 
						|
 | 
						|
/*
 | 
						|
 * The 2 LSB of fan speed registers are used for something different.
 | 
						|
 * The actual 2 LSB of the measurements are not available.
 | 
						|
 */
 | 
						|
static inline unsigned long fan_from_reg(u16 reg)
 | 
						|
{
 | 
						|
	reg &= 0xfffc;
 | 
						|
	if (reg == 0x0000 || reg == 0xfffc)
 | 
						|
		return 0;
 | 
						|
	return 5400000UL / reg;
 | 
						|
}
 | 
						|
 | 
						|
/* The 2 LSB of the fan speed limit registers are not significant. */
 | 
						|
static inline u16 fan_to_reg(unsigned long val)
 | 
						|
{
 | 
						|
	if (val < 83UL)
 | 
						|
		return 0xffff;
 | 
						|
	if (val >= 1350000UL)
 | 
						|
		return 0x0004;
 | 
						|
	return ((1350000UL + val / 2) / val) << 2;
 | 
						|
}
 | 
						|
 | 
						|
/*
 | 
						|
 * PWM registers and conversions
 | 
						|
 */
 | 
						|
 | 
						|
#define PC87427_REG_PWM_ENABLE		0x10
 | 
						|
#define PC87427_REG_PWM_DUTY		0x12
 | 
						|
 | 
						|
#define PWM_ENABLE_MODE_MASK		(7 << 4)
 | 
						|
#define PWM_ENABLE_CTLEN		(1 << 0)
 | 
						|
 | 
						|
#define PWM_MODE_MANUAL			(0 << 4)
 | 
						|
#define PWM_MODE_AUTO			(1 << 4)
 | 
						|
#define PWM_MODE_OFF			(2 << 4)
 | 
						|
#define PWM_MODE_ON			(7 << 4)
 | 
						|
 | 
						|
/*
 | 
						|
 * Dedicated function to read all registers related to a given PWM output.
 | 
						|
 * This saves us quite a few locks and bank selections.
 | 
						|
 * Must be called with data->lock held.
 | 
						|
 * nr is from 0 to 3
 | 
						|
 */
 | 
						|
static void pc87427_readall_pwm(struct pc87427_data *data, u8 nr)
 | 
						|
{
 | 
						|
	int iobase = data->address[LD_FAN];
 | 
						|
 | 
						|
	outb(BANK_FC(nr), iobase + PC87427_REG_BANK);
 | 
						|
	data->pwm_enable[nr] = inb(iobase + PC87427_REG_PWM_ENABLE);
 | 
						|
	data->pwm[nr] = inb(iobase + PC87427_REG_PWM_DUTY);
 | 
						|
}
 | 
						|
 | 
						|
static inline int pwm_enable_from_reg(u8 reg)
 | 
						|
{
 | 
						|
	switch (reg & PWM_ENABLE_MODE_MASK) {
 | 
						|
	case PWM_MODE_ON:
 | 
						|
		return 0;
 | 
						|
	case PWM_MODE_MANUAL:
 | 
						|
	case PWM_MODE_OFF:
 | 
						|
		return 1;
 | 
						|
	case PWM_MODE_AUTO:
 | 
						|
		return 2;
 | 
						|
	default:
 | 
						|
		return -EPROTO;
 | 
						|
	}
 | 
						|
}
 | 
						|
 | 
						|
static inline u8 pwm_enable_to_reg(unsigned long val, u8 pwmval)
 | 
						|
{
 | 
						|
	switch (val) {
 | 
						|
	default:
 | 
						|
		return PWM_MODE_ON;
 | 
						|
	case 1:
 | 
						|
		return pwmval ? PWM_MODE_MANUAL : PWM_MODE_OFF;
 | 
						|
	case 2:
 | 
						|
		return PWM_MODE_AUTO;
 | 
						|
	}
 | 
						|
}
 | 
						|
 | 
						|
/*
 | 
						|
 * Temperature registers and conversions
 | 
						|
 */
 | 
						|
 | 
						|
#define PC87427_REG_TEMP_STATUS		0x10
 | 
						|
#define PC87427_REG_TEMP		0x14
 | 
						|
#define PC87427_REG_TEMP_MAX		0x18
 | 
						|
#define PC87427_REG_TEMP_MIN		0x19
 | 
						|
#define PC87427_REG_TEMP_CRIT		0x1a
 | 
						|
#define PC87427_REG_TEMP_TYPE		0x1d
 | 
						|
 | 
						|
#define TEMP_STATUS_CHANEN		(1 << 0)
 | 
						|
#define TEMP_STATUS_LOWFLG		(1 << 1)
 | 
						|
#define TEMP_STATUS_HIGHFLG		(1 << 2)
 | 
						|
#define TEMP_STATUS_CRITFLG		(1 << 3)
 | 
						|
#define TEMP_STATUS_SENSERR		(1 << 5)
 | 
						|
#define TEMP_TYPE_MASK			(3 << 5)
 | 
						|
 | 
						|
#define TEMP_TYPE_THERMISTOR		(1 << 5)
 | 
						|
#define TEMP_TYPE_REMOTE_DIODE		(2 << 5)
 | 
						|
#define TEMP_TYPE_LOCAL_DIODE		(3 << 5)
 | 
						|
 | 
						|
/*
 | 
						|
 * Dedicated function to read all registers related to a given temperature
 | 
						|
 * input. This saves us quite a few locks and bank selections.
 | 
						|
 * Must be called with data->lock held.
 | 
						|
 * nr is from 0 to 5
 | 
						|
 */
 | 
						|
static void pc87427_readall_temp(struct pc87427_data *data, u8 nr)
 | 
						|
{
 | 
						|
	int iobase = data->address[LD_TEMP];
 | 
						|
 | 
						|
	outb(BANK_TM(nr), iobase + PC87427_REG_BANK);
 | 
						|
	data->temp[nr] = le16_to_cpu(inw(iobase + PC87427_REG_TEMP));
 | 
						|
	data->temp_max[nr] = inb(iobase + PC87427_REG_TEMP_MAX);
 | 
						|
	data->temp_min[nr] = inb(iobase + PC87427_REG_TEMP_MIN);
 | 
						|
	data->temp_crit[nr] = inb(iobase + PC87427_REG_TEMP_CRIT);
 | 
						|
	data->temp_type[nr] = inb(iobase + PC87427_REG_TEMP_TYPE);
 | 
						|
	data->temp_status[nr] = inb(iobase + PC87427_REG_TEMP_STATUS);
 | 
						|
	/* Clear fan alarm bits */
 | 
						|
	outb(data->temp_status[nr], iobase + PC87427_REG_TEMP_STATUS);
 | 
						|
}
 | 
						|
 | 
						|
static inline unsigned int temp_type_from_reg(u8 reg)
 | 
						|
{
 | 
						|
	switch (reg & TEMP_TYPE_MASK) {
 | 
						|
	case TEMP_TYPE_THERMISTOR:
 | 
						|
		return 4;
 | 
						|
	case TEMP_TYPE_REMOTE_DIODE:
 | 
						|
	case TEMP_TYPE_LOCAL_DIODE:
 | 
						|
		return 3;
 | 
						|
	default:
 | 
						|
		return 0;
 | 
						|
	}
 | 
						|
}
 | 
						|
 | 
						|
/*
 | 
						|
 * We assume 8-bit thermal sensors; 9-bit thermal sensors are possible
 | 
						|
 * too, but I have no idea how to figure out when they are used.
 | 
						|
 */
 | 
						|
static inline long temp_from_reg(s16 reg)
 | 
						|
{
 | 
						|
	return reg * 1000 / 256;
 | 
						|
}
 | 
						|
 | 
						|
static inline long temp_from_reg8(s8 reg)
 | 
						|
{
 | 
						|
	return reg * 1000;
 | 
						|
}
 | 
						|
 | 
						|
/*
 | 
						|
 * Data interface
 | 
						|
 */
 | 
						|
 | 
						|
static struct pc87427_data *pc87427_update_device(struct device *dev)
 | 
						|
{
 | 
						|
	struct pc87427_data *data = dev_get_drvdata(dev);
 | 
						|
	int i;
 | 
						|
 | 
						|
	mutex_lock(&data->lock);
 | 
						|
	if (!time_after(jiffies, data->last_updated + HZ)
 | 
						|
	 && data->last_updated)
 | 
						|
		goto done;
 | 
						|
 | 
						|
	/* Fans */
 | 
						|
	for (i = 0; i < 8; i++) {
 | 
						|
		if (!(data->fan_enabled & (1 << i)))
 | 
						|
			continue;
 | 
						|
		pc87427_readall_fan(data, i);
 | 
						|
	}
 | 
						|
 | 
						|
	/* PWM outputs */
 | 
						|
	for (i = 0; i < 4; i++) {
 | 
						|
		if (!(data->pwm_enabled & (1 << i)))
 | 
						|
			continue;
 | 
						|
		pc87427_readall_pwm(data, i);
 | 
						|
	}
 | 
						|
 | 
						|
	/* Temperature channels */
 | 
						|
	for (i = 0; i < 6; i++) {
 | 
						|
		if (!(data->temp_enabled & (1 << i)))
 | 
						|
			continue;
 | 
						|
		pc87427_readall_temp(data, i);
 | 
						|
	}
 | 
						|
 | 
						|
	data->last_updated = jiffies;
 | 
						|
 | 
						|
done:
 | 
						|
	mutex_unlock(&data->lock);
 | 
						|
	return data;
 | 
						|
}
 | 
						|
 | 
						|
static ssize_t show_fan_input(struct device *dev, struct device_attribute
 | 
						|
			      *devattr, char *buf)
 | 
						|
{
 | 
						|
	struct pc87427_data *data = pc87427_update_device(dev);
 | 
						|
	int nr = to_sensor_dev_attr(devattr)->index;
 | 
						|
 | 
						|
	return sprintf(buf, "%lu\n", fan_from_reg(data->fan[nr]));
 | 
						|
}
 | 
						|
 | 
						|
static ssize_t show_fan_min(struct device *dev, struct device_attribute
 | 
						|
			    *devattr, char *buf)
 | 
						|
{
 | 
						|
	struct pc87427_data *data = pc87427_update_device(dev);
 | 
						|
	int nr = to_sensor_dev_attr(devattr)->index;
 | 
						|
 | 
						|
	return sprintf(buf, "%lu\n", fan_from_reg(data->fan_min[nr]));
 | 
						|
}
 | 
						|
 | 
						|
static ssize_t show_fan_alarm(struct device *dev, struct device_attribute
 | 
						|
			      *devattr, char *buf)
 | 
						|
{
 | 
						|
	struct pc87427_data *data = pc87427_update_device(dev);
 | 
						|
	int nr = to_sensor_dev_attr(devattr)->index;
 | 
						|
 | 
						|
	return sprintf(buf, "%d\n", !!(data->fan_status[nr]
 | 
						|
				       & FAN_STATUS_LOSPD));
 | 
						|
}
 | 
						|
 | 
						|
static ssize_t show_fan_fault(struct device *dev, struct device_attribute
 | 
						|
			      *devattr, char *buf)
 | 
						|
{
 | 
						|
	struct pc87427_data *data = pc87427_update_device(dev);
 | 
						|
	int nr = to_sensor_dev_attr(devattr)->index;
 | 
						|
 | 
						|
	return sprintf(buf, "%d\n", !!(data->fan_status[nr]
 | 
						|
				       & FAN_STATUS_STALL));
 | 
						|
}
 | 
						|
 | 
						|
static ssize_t set_fan_min(struct device *dev, struct device_attribute
 | 
						|
			   *devattr, const char *buf, size_t count)
 | 
						|
{
 | 
						|
	struct pc87427_data *data = dev_get_drvdata(dev);
 | 
						|
	int nr = to_sensor_dev_attr(devattr)->index;
 | 
						|
	unsigned long val;
 | 
						|
	int iobase = data->address[LD_FAN];
 | 
						|
 | 
						|
	if (kstrtoul(buf, 10, &val) < 0)
 | 
						|
		return -EINVAL;
 | 
						|
 | 
						|
	mutex_lock(&data->lock);
 | 
						|
	outb(BANK_FM(nr), iobase + PC87427_REG_BANK);
 | 
						|
	/*
 | 
						|
	 * The low speed limit registers are read-only while monitoring
 | 
						|
	 * is enabled, so we have to disable monitoring, then change the
 | 
						|
	 * limit, and finally enable monitoring again.
 | 
						|
	 */
 | 
						|
	outb(0, iobase + PC87427_REG_FAN_STATUS);
 | 
						|
	data->fan_min[nr] = fan_to_reg(val);
 | 
						|
	outw(data->fan_min[nr], iobase + PC87427_REG_FAN_MIN);
 | 
						|
	outb(FAN_STATUS_MONEN, iobase + PC87427_REG_FAN_STATUS);
 | 
						|
	mutex_unlock(&data->lock);
 | 
						|
 | 
						|
	return count;
 | 
						|
}
 | 
						|
 | 
						|
static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, show_fan_input, NULL, 0);
 | 
						|
static SENSOR_DEVICE_ATTR(fan2_input, S_IRUGO, show_fan_input, NULL, 1);
 | 
						|
static SENSOR_DEVICE_ATTR(fan3_input, S_IRUGO, show_fan_input, NULL, 2);
 | 
						|
static SENSOR_DEVICE_ATTR(fan4_input, S_IRUGO, show_fan_input, NULL, 3);
 | 
						|
static SENSOR_DEVICE_ATTR(fan5_input, S_IRUGO, show_fan_input, NULL, 4);
 | 
						|
static SENSOR_DEVICE_ATTR(fan6_input, S_IRUGO, show_fan_input, NULL, 5);
 | 
						|
static SENSOR_DEVICE_ATTR(fan7_input, S_IRUGO, show_fan_input, NULL, 6);
 | 
						|
static SENSOR_DEVICE_ATTR(fan8_input, S_IRUGO, show_fan_input, NULL, 7);
 | 
						|
 | 
						|
static SENSOR_DEVICE_ATTR(fan1_min, S_IWUSR | S_IRUGO,
 | 
						|
			  show_fan_min, set_fan_min, 0);
 | 
						|
static SENSOR_DEVICE_ATTR(fan2_min, S_IWUSR | S_IRUGO,
 | 
						|
			  show_fan_min, set_fan_min, 1);
 | 
						|
static SENSOR_DEVICE_ATTR(fan3_min, S_IWUSR | S_IRUGO,
 | 
						|
			  show_fan_min, set_fan_min, 2);
 | 
						|
static SENSOR_DEVICE_ATTR(fan4_min, S_IWUSR | S_IRUGO,
 | 
						|
			  show_fan_min, set_fan_min, 3);
 | 
						|
static SENSOR_DEVICE_ATTR(fan5_min, S_IWUSR | S_IRUGO,
 | 
						|
			  show_fan_min, set_fan_min, 4);
 | 
						|
static SENSOR_DEVICE_ATTR(fan6_min, S_IWUSR | S_IRUGO,
 | 
						|
			  show_fan_min, set_fan_min, 5);
 | 
						|
static SENSOR_DEVICE_ATTR(fan7_min, S_IWUSR | S_IRUGO,
 | 
						|
			  show_fan_min, set_fan_min, 6);
 | 
						|
static SENSOR_DEVICE_ATTR(fan8_min, S_IWUSR | S_IRUGO,
 | 
						|
			  show_fan_min, set_fan_min, 7);
 | 
						|
 | 
						|
static SENSOR_DEVICE_ATTR(fan1_alarm, S_IRUGO, show_fan_alarm, NULL, 0);
 | 
						|
static SENSOR_DEVICE_ATTR(fan2_alarm, S_IRUGO, show_fan_alarm, NULL, 1);
 | 
						|
static SENSOR_DEVICE_ATTR(fan3_alarm, S_IRUGO, show_fan_alarm, NULL, 2);
 | 
						|
static SENSOR_DEVICE_ATTR(fan4_alarm, S_IRUGO, show_fan_alarm, NULL, 3);
 | 
						|
static SENSOR_DEVICE_ATTR(fan5_alarm, S_IRUGO, show_fan_alarm, NULL, 4);
 | 
						|
static SENSOR_DEVICE_ATTR(fan6_alarm, S_IRUGO, show_fan_alarm, NULL, 5);
 | 
						|
static SENSOR_DEVICE_ATTR(fan7_alarm, S_IRUGO, show_fan_alarm, NULL, 6);
 | 
						|
static SENSOR_DEVICE_ATTR(fan8_alarm, S_IRUGO, show_fan_alarm, NULL, 7);
 | 
						|
 | 
						|
static SENSOR_DEVICE_ATTR(fan1_fault, S_IRUGO, show_fan_fault, NULL, 0);
 | 
						|
static SENSOR_DEVICE_ATTR(fan2_fault, S_IRUGO, show_fan_fault, NULL, 1);
 | 
						|
static SENSOR_DEVICE_ATTR(fan3_fault, S_IRUGO, show_fan_fault, NULL, 2);
 | 
						|
static SENSOR_DEVICE_ATTR(fan4_fault, S_IRUGO, show_fan_fault, NULL, 3);
 | 
						|
static SENSOR_DEVICE_ATTR(fan5_fault, S_IRUGO, show_fan_fault, NULL, 4);
 | 
						|
static SENSOR_DEVICE_ATTR(fan6_fault, S_IRUGO, show_fan_fault, NULL, 5);
 | 
						|
static SENSOR_DEVICE_ATTR(fan7_fault, S_IRUGO, show_fan_fault, NULL, 6);
 | 
						|
static SENSOR_DEVICE_ATTR(fan8_fault, S_IRUGO, show_fan_fault, NULL, 7);
 | 
						|
 | 
						|
static struct attribute *pc87427_attributes_fan[8][5] = {
 | 
						|
	{
 | 
						|
		&sensor_dev_attr_fan1_input.dev_attr.attr,
 | 
						|
		&sensor_dev_attr_fan1_min.dev_attr.attr,
 | 
						|
		&sensor_dev_attr_fan1_alarm.dev_attr.attr,
 | 
						|
		&sensor_dev_attr_fan1_fault.dev_attr.attr,
 | 
						|
		NULL
 | 
						|
	}, {
 | 
						|
		&sensor_dev_attr_fan2_input.dev_attr.attr,
 | 
						|
		&sensor_dev_attr_fan2_min.dev_attr.attr,
 | 
						|
		&sensor_dev_attr_fan2_alarm.dev_attr.attr,
 | 
						|
		&sensor_dev_attr_fan2_fault.dev_attr.attr,
 | 
						|
		NULL
 | 
						|
	}, {
 | 
						|
		&sensor_dev_attr_fan3_input.dev_attr.attr,
 | 
						|
		&sensor_dev_attr_fan3_min.dev_attr.attr,
 | 
						|
		&sensor_dev_attr_fan3_alarm.dev_attr.attr,
 | 
						|
		&sensor_dev_attr_fan3_fault.dev_attr.attr,
 | 
						|
		NULL
 | 
						|
	}, {
 | 
						|
		&sensor_dev_attr_fan4_input.dev_attr.attr,
 | 
						|
		&sensor_dev_attr_fan4_min.dev_attr.attr,
 | 
						|
		&sensor_dev_attr_fan4_alarm.dev_attr.attr,
 | 
						|
		&sensor_dev_attr_fan4_fault.dev_attr.attr,
 | 
						|
		NULL
 | 
						|
	}, {
 | 
						|
		&sensor_dev_attr_fan5_input.dev_attr.attr,
 | 
						|
		&sensor_dev_attr_fan5_min.dev_attr.attr,
 | 
						|
		&sensor_dev_attr_fan5_alarm.dev_attr.attr,
 | 
						|
		&sensor_dev_attr_fan5_fault.dev_attr.attr,
 | 
						|
		NULL
 | 
						|
	}, {
 | 
						|
		&sensor_dev_attr_fan6_input.dev_attr.attr,
 | 
						|
		&sensor_dev_attr_fan6_min.dev_attr.attr,
 | 
						|
		&sensor_dev_attr_fan6_alarm.dev_attr.attr,
 | 
						|
		&sensor_dev_attr_fan6_fault.dev_attr.attr,
 | 
						|
		NULL
 | 
						|
	}, {
 | 
						|
		&sensor_dev_attr_fan7_input.dev_attr.attr,
 | 
						|
		&sensor_dev_attr_fan7_min.dev_attr.attr,
 | 
						|
		&sensor_dev_attr_fan7_alarm.dev_attr.attr,
 | 
						|
		&sensor_dev_attr_fan7_fault.dev_attr.attr,
 | 
						|
		NULL
 | 
						|
	}, {
 | 
						|
		&sensor_dev_attr_fan8_input.dev_attr.attr,
 | 
						|
		&sensor_dev_attr_fan8_min.dev_attr.attr,
 | 
						|
		&sensor_dev_attr_fan8_alarm.dev_attr.attr,
 | 
						|
		&sensor_dev_attr_fan8_fault.dev_attr.attr,
 | 
						|
		NULL
 | 
						|
	}
 | 
						|
};
 | 
						|
 | 
						|
static const struct attribute_group pc87427_group_fan[8] = {
 | 
						|
	{ .attrs = pc87427_attributes_fan[0] },
 | 
						|
	{ .attrs = pc87427_attributes_fan[1] },
 | 
						|
	{ .attrs = pc87427_attributes_fan[2] },
 | 
						|
	{ .attrs = pc87427_attributes_fan[3] },
 | 
						|
	{ .attrs = pc87427_attributes_fan[4] },
 | 
						|
	{ .attrs = pc87427_attributes_fan[5] },
 | 
						|
	{ .attrs = pc87427_attributes_fan[6] },
 | 
						|
	{ .attrs = pc87427_attributes_fan[7] },
 | 
						|
};
 | 
						|
 | 
						|
/*
 | 
						|
 * Must be called with data->lock held and pc87427_readall_pwm() freshly
 | 
						|
 * called
 | 
						|
 */
 | 
						|
static void update_pwm_enable(struct pc87427_data *data, int nr, u8 mode)
 | 
						|
{
 | 
						|
	int iobase = data->address[LD_FAN];
 | 
						|
	data->pwm_enable[nr] &= ~PWM_ENABLE_MODE_MASK;
 | 
						|
	data->pwm_enable[nr] |= mode;
 | 
						|
	outb(data->pwm_enable[nr], iobase + PC87427_REG_PWM_ENABLE);
 | 
						|
}
 | 
						|
 | 
						|
static ssize_t show_pwm_enable(struct device *dev, struct device_attribute
 | 
						|
			       *devattr, char *buf)
 | 
						|
{
 | 
						|
	struct pc87427_data *data = pc87427_update_device(dev);
 | 
						|
	int nr = to_sensor_dev_attr(devattr)->index;
 | 
						|
	int pwm_enable;
 | 
						|
 | 
						|
	pwm_enable = pwm_enable_from_reg(data->pwm_enable[nr]);
 | 
						|
	if (pwm_enable < 0)
 | 
						|
		return pwm_enable;
 | 
						|
	return sprintf(buf, "%d\n", pwm_enable);
 | 
						|
}
 | 
						|
 | 
						|
static ssize_t set_pwm_enable(struct device *dev, struct device_attribute
 | 
						|
			      *devattr, const char *buf, size_t count)
 | 
						|
{
 | 
						|
	struct pc87427_data *data = dev_get_drvdata(dev);
 | 
						|
	int nr = to_sensor_dev_attr(devattr)->index;
 | 
						|
	unsigned long val;
 | 
						|
 | 
						|
	if (kstrtoul(buf, 10, &val) < 0 || val > 2)
 | 
						|
		return -EINVAL;
 | 
						|
	/* Can't go to automatic mode if it isn't configured */
 | 
						|
	if (val == 2 && !(data->pwm_auto_ok & (1 << nr)))
 | 
						|
		return -EINVAL;
 | 
						|
 | 
						|
	mutex_lock(&data->lock);
 | 
						|
	pc87427_readall_pwm(data, nr);
 | 
						|
	update_pwm_enable(data, nr, pwm_enable_to_reg(val, data->pwm[nr]));
 | 
						|
	mutex_unlock(&data->lock);
 | 
						|
 | 
						|
	return count;
 | 
						|
}
 | 
						|
 | 
						|
static ssize_t show_pwm(struct device *dev, struct device_attribute
 | 
						|
			*devattr, char *buf)
 | 
						|
{
 | 
						|
	struct pc87427_data *data = pc87427_update_device(dev);
 | 
						|
	int nr = to_sensor_dev_attr(devattr)->index;
 | 
						|
 | 
						|
	return sprintf(buf, "%d\n", (int)data->pwm[nr]);
 | 
						|
}
 | 
						|
 | 
						|
static ssize_t set_pwm(struct device *dev, struct device_attribute
 | 
						|
		       *devattr, const char *buf, size_t count)
 | 
						|
{
 | 
						|
	struct pc87427_data *data = dev_get_drvdata(dev);
 | 
						|
	int nr = to_sensor_dev_attr(devattr)->index;
 | 
						|
	unsigned long val;
 | 
						|
	int iobase = data->address[LD_FAN];
 | 
						|
	u8 mode;
 | 
						|
 | 
						|
	if (kstrtoul(buf, 10, &val) < 0 || val > 0xff)
 | 
						|
		return -EINVAL;
 | 
						|
 | 
						|
	mutex_lock(&data->lock);
 | 
						|
	pc87427_readall_pwm(data, nr);
 | 
						|
	mode = data->pwm_enable[nr] & PWM_ENABLE_MODE_MASK;
 | 
						|
	if (mode != PWM_MODE_MANUAL && mode != PWM_MODE_OFF) {
 | 
						|
		dev_notice(dev,
 | 
						|
			   "Can't set PWM%d duty cycle while not in manual mode\n",
 | 
						|
			   nr + 1);
 | 
						|
		mutex_unlock(&data->lock);
 | 
						|
		return -EPERM;
 | 
						|
	}
 | 
						|
 | 
						|
	/* We may have to change the mode */
 | 
						|
	if (mode == PWM_MODE_MANUAL && val == 0) {
 | 
						|
		/* Transition from Manual to Off */
 | 
						|
		update_pwm_enable(data, nr, PWM_MODE_OFF);
 | 
						|
		mode = PWM_MODE_OFF;
 | 
						|
		dev_dbg(dev, "Switching PWM%d from %s to %s\n", nr + 1,
 | 
						|
			"manual", "off");
 | 
						|
	} else if (mode == PWM_MODE_OFF && val != 0) {
 | 
						|
		/* Transition from Off to Manual */
 | 
						|
		update_pwm_enable(data, nr, PWM_MODE_MANUAL);
 | 
						|
		mode = PWM_MODE_MANUAL;
 | 
						|
		dev_dbg(dev, "Switching PWM%d from %s to %s\n", nr + 1,
 | 
						|
			"off", "manual");
 | 
						|
	}
 | 
						|
 | 
						|
	data->pwm[nr] = val;
 | 
						|
	if (mode == PWM_MODE_MANUAL)
 | 
						|
		outb(val, iobase + PC87427_REG_PWM_DUTY);
 | 
						|
	mutex_unlock(&data->lock);
 | 
						|
 | 
						|
	return count;
 | 
						|
}
 | 
						|
 | 
						|
static SENSOR_DEVICE_ATTR(pwm1_enable, S_IWUSR | S_IRUGO,
 | 
						|
			  show_pwm_enable, set_pwm_enable, 0);
 | 
						|
static SENSOR_DEVICE_ATTR(pwm2_enable, S_IWUSR | S_IRUGO,
 | 
						|
			  show_pwm_enable, set_pwm_enable, 1);
 | 
						|
static SENSOR_DEVICE_ATTR(pwm3_enable, S_IWUSR | S_IRUGO,
 | 
						|
			  show_pwm_enable, set_pwm_enable, 2);
 | 
						|
static SENSOR_DEVICE_ATTR(pwm4_enable, S_IWUSR | S_IRUGO,
 | 
						|
			  show_pwm_enable, set_pwm_enable, 3);
 | 
						|
 | 
						|
static SENSOR_DEVICE_ATTR(pwm1, S_IWUSR | S_IRUGO, show_pwm, set_pwm, 0);
 | 
						|
static SENSOR_DEVICE_ATTR(pwm2, S_IWUSR | S_IRUGO, show_pwm, set_pwm, 1);
 | 
						|
static SENSOR_DEVICE_ATTR(pwm3, S_IWUSR | S_IRUGO, show_pwm, set_pwm, 2);
 | 
						|
static SENSOR_DEVICE_ATTR(pwm4, S_IWUSR | S_IRUGO, show_pwm, set_pwm, 3);
 | 
						|
 | 
						|
static struct attribute *pc87427_attributes_pwm[4][3] = {
 | 
						|
	{
 | 
						|
		&sensor_dev_attr_pwm1_enable.dev_attr.attr,
 | 
						|
		&sensor_dev_attr_pwm1.dev_attr.attr,
 | 
						|
		NULL
 | 
						|
	}, {
 | 
						|
		&sensor_dev_attr_pwm2_enable.dev_attr.attr,
 | 
						|
		&sensor_dev_attr_pwm2.dev_attr.attr,
 | 
						|
		NULL
 | 
						|
	}, {
 | 
						|
		&sensor_dev_attr_pwm3_enable.dev_attr.attr,
 | 
						|
		&sensor_dev_attr_pwm3.dev_attr.attr,
 | 
						|
		NULL
 | 
						|
	}, {
 | 
						|
		&sensor_dev_attr_pwm4_enable.dev_attr.attr,
 | 
						|
		&sensor_dev_attr_pwm4.dev_attr.attr,
 | 
						|
		NULL
 | 
						|
	}
 | 
						|
};
 | 
						|
 | 
						|
static const struct attribute_group pc87427_group_pwm[4] = {
 | 
						|
	{ .attrs = pc87427_attributes_pwm[0] },
 | 
						|
	{ .attrs = pc87427_attributes_pwm[1] },
 | 
						|
	{ .attrs = pc87427_attributes_pwm[2] },
 | 
						|
	{ .attrs = pc87427_attributes_pwm[3] },
 | 
						|
};
 | 
						|
 | 
						|
static ssize_t show_temp_input(struct device *dev, struct device_attribute
 | 
						|
			       *devattr, char *buf)
 | 
						|
{
 | 
						|
	struct pc87427_data *data = pc87427_update_device(dev);
 | 
						|
	int nr = to_sensor_dev_attr(devattr)->index;
 | 
						|
 | 
						|
	return sprintf(buf, "%ld\n", temp_from_reg(data->temp[nr]));
 | 
						|
}
 | 
						|
 | 
						|
static ssize_t show_temp_min(struct device *dev, struct device_attribute
 | 
						|
			     *devattr, char *buf)
 | 
						|
{
 | 
						|
	struct pc87427_data *data = pc87427_update_device(dev);
 | 
						|
	int nr = to_sensor_dev_attr(devattr)->index;
 | 
						|
 | 
						|
	return sprintf(buf, "%ld\n", temp_from_reg8(data->temp_min[nr]));
 | 
						|
}
 | 
						|
 | 
						|
static ssize_t show_temp_max(struct device *dev, struct device_attribute
 | 
						|
			     *devattr, char *buf)
 | 
						|
{
 | 
						|
	struct pc87427_data *data = pc87427_update_device(dev);
 | 
						|
	int nr = to_sensor_dev_attr(devattr)->index;
 | 
						|
 | 
						|
	return sprintf(buf, "%ld\n", temp_from_reg8(data->temp_max[nr]));
 | 
						|
}
 | 
						|
 | 
						|
static ssize_t show_temp_crit(struct device *dev, struct device_attribute
 | 
						|
			      *devattr, char *buf)
 | 
						|
{
 | 
						|
	struct pc87427_data *data = pc87427_update_device(dev);
 | 
						|
	int nr = to_sensor_dev_attr(devattr)->index;
 | 
						|
 | 
						|
	return sprintf(buf, "%ld\n", temp_from_reg8(data->temp_crit[nr]));
 | 
						|
}
 | 
						|
 | 
						|
static ssize_t show_temp_type(struct device *dev, struct device_attribute
 | 
						|
			      *devattr, char *buf)
 | 
						|
{
 | 
						|
	struct pc87427_data *data = pc87427_update_device(dev);
 | 
						|
	int nr = to_sensor_dev_attr(devattr)->index;
 | 
						|
 | 
						|
	return sprintf(buf, "%u\n", temp_type_from_reg(data->temp_type[nr]));
 | 
						|
}
 | 
						|
 | 
						|
static ssize_t show_temp_min_alarm(struct device *dev, struct device_attribute
 | 
						|
				   *devattr, char *buf)
 | 
						|
{
 | 
						|
	struct pc87427_data *data = pc87427_update_device(dev);
 | 
						|
	int nr = to_sensor_dev_attr(devattr)->index;
 | 
						|
 | 
						|
	return sprintf(buf, "%d\n", !!(data->temp_status[nr]
 | 
						|
				       & TEMP_STATUS_LOWFLG));
 | 
						|
}
 | 
						|
 | 
						|
static ssize_t show_temp_max_alarm(struct device *dev, struct device_attribute
 | 
						|
				   *devattr, char *buf)
 | 
						|
{
 | 
						|
	struct pc87427_data *data = pc87427_update_device(dev);
 | 
						|
	int nr = to_sensor_dev_attr(devattr)->index;
 | 
						|
 | 
						|
	return sprintf(buf, "%d\n", !!(data->temp_status[nr]
 | 
						|
				       & TEMP_STATUS_HIGHFLG));
 | 
						|
}
 | 
						|
 | 
						|
static ssize_t show_temp_crit_alarm(struct device *dev, struct device_attribute
 | 
						|
				   *devattr, char *buf)
 | 
						|
{
 | 
						|
	struct pc87427_data *data = pc87427_update_device(dev);
 | 
						|
	int nr = to_sensor_dev_attr(devattr)->index;
 | 
						|
 | 
						|
	return sprintf(buf, "%d\n", !!(data->temp_status[nr]
 | 
						|
				       & TEMP_STATUS_CRITFLG));
 | 
						|
}
 | 
						|
 | 
						|
static ssize_t show_temp_fault(struct device *dev, struct device_attribute
 | 
						|
			       *devattr, char *buf)
 | 
						|
{
 | 
						|
	struct pc87427_data *data = pc87427_update_device(dev);
 | 
						|
	int nr = to_sensor_dev_attr(devattr)->index;
 | 
						|
 | 
						|
	return sprintf(buf, "%d\n", !!(data->temp_status[nr]
 | 
						|
				       & TEMP_STATUS_SENSERR));
 | 
						|
}
 | 
						|
 | 
						|
static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp_input, NULL, 0);
 | 
						|
static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_temp_input, NULL, 1);
 | 
						|
static SENSOR_DEVICE_ATTR(temp3_input, S_IRUGO, show_temp_input, NULL, 2);
 | 
						|
static SENSOR_DEVICE_ATTR(temp4_input, S_IRUGO, show_temp_input, NULL, 3);
 | 
						|
static SENSOR_DEVICE_ATTR(temp5_input, S_IRUGO, show_temp_input, NULL, 4);
 | 
						|
static SENSOR_DEVICE_ATTR(temp6_input, S_IRUGO, show_temp_input, NULL, 5);
 | 
						|
 | 
						|
static SENSOR_DEVICE_ATTR(temp1_min, S_IRUGO, show_temp_min, NULL, 0);
 | 
						|
static SENSOR_DEVICE_ATTR(temp2_min, S_IRUGO, show_temp_min, NULL, 1);
 | 
						|
static SENSOR_DEVICE_ATTR(temp3_min, S_IRUGO, show_temp_min, NULL, 2);
 | 
						|
static SENSOR_DEVICE_ATTR(temp4_min, S_IRUGO, show_temp_min, NULL, 3);
 | 
						|
static SENSOR_DEVICE_ATTR(temp5_min, S_IRUGO, show_temp_min, NULL, 4);
 | 
						|
static SENSOR_DEVICE_ATTR(temp6_min, S_IRUGO, show_temp_min, NULL, 5);
 | 
						|
 | 
						|
static SENSOR_DEVICE_ATTR(temp1_max, S_IRUGO, show_temp_max, NULL, 0);
 | 
						|
static SENSOR_DEVICE_ATTR(temp2_max, S_IRUGO, show_temp_max, NULL, 1);
 | 
						|
static SENSOR_DEVICE_ATTR(temp3_max, S_IRUGO, show_temp_max, NULL, 2);
 | 
						|
static SENSOR_DEVICE_ATTR(temp4_max, S_IRUGO, show_temp_max, NULL, 3);
 | 
						|
static SENSOR_DEVICE_ATTR(temp5_max, S_IRUGO, show_temp_max, NULL, 4);
 | 
						|
static SENSOR_DEVICE_ATTR(temp6_max, S_IRUGO, show_temp_max, NULL, 5);
 | 
						|
 | 
						|
static SENSOR_DEVICE_ATTR(temp1_crit, S_IRUGO, show_temp_crit, NULL, 0);
 | 
						|
static SENSOR_DEVICE_ATTR(temp2_crit, S_IRUGO, show_temp_crit, NULL, 1);
 | 
						|
static SENSOR_DEVICE_ATTR(temp3_crit, S_IRUGO, show_temp_crit, NULL, 2);
 | 
						|
static SENSOR_DEVICE_ATTR(temp4_crit, S_IRUGO, show_temp_crit, NULL, 3);
 | 
						|
static SENSOR_DEVICE_ATTR(temp5_crit, S_IRUGO, show_temp_crit, NULL, 4);
 | 
						|
static SENSOR_DEVICE_ATTR(temp6_crit, S_IRUGO, show_temp_crit, NULL, 5);
 | 
						|
 | 
						|
static SENSOR_DEVICE_ATTR(temp1_type, S_IRUGO, show_temp_type, NULL, 0);
 | 
						|
static SENSOR_DEVICE_ATTR(temp2_type, S_IRUGO, show_temp_type, NULL, 1);
 | 
						|
static SENSOR_DEVICE_ATTR(temp3_type, S_IRUGO, show_temp_type, NULL, 2);
 | 
						|
static SENSOR_DEVICE_ATTR(temp4_type, S_IRUGO, show_temp_type, NULL, 3);
 | 
						|
static SENSOR_DEVICE_ATTR(temp5_type, S_IRUGO, show_temp_type, NULL, 4);
 | 
						|
static SENSOR_DEVICE_ATTR(temp6_type, S_IRUGO, show_temp_type, NULL, 5);
 | 
						|
 | 
						|
static SENSOR_DEVICE_ATTR(temp1_min_alarm, S_IRUGO,
 | 
						|
			  show_temp_min_alarm, NULL, 0);
 | 
						|
static SENSOR_DEVICE_ATTR(temp2_min_alarm, S_IRUGO,
 | 
						|
			  show_temp_min_alarm, NULL, 1);
 | 
						|
static SENSOR_DEVICE_ATTR(temp3_min_alarm, S_IRUGO,
 | 
						|
			  show_temp_min_alarm, NULL, 2);
 | 
						|
static SENSOR_DEVICE_ATTR(temp4_min_alarm, S_IRUGO,
 | 
						|
			  show_temp_min_alarm, NULL, 3);
 | 
						|
static SENSOR_DEVICE_ATTR(temp5_min_alarm, S_IRUGO,
 | 
						|
			  show_temp_min_alarm, NULL, 4);
 | 
						|
static SENSOR_DEVICE_ATTR(temp6_min_alarm, S_IRUGO,
 | 
						|
			  show_temp_min_alarm, NULL, 5);
 | 
						|
 | 
						|
static SENSOR_DEVICE_ATTR(temp1_max_alarm, S_IRUGO,
 | 
						|
			  show_temp_max_alarm, NULL, 0);
 | 
						|
static SENSOR_DEVICE_ATTR(temp2_max_alarm, S_IRUGO,
 | 
						|
			  show_temp_max_alarm, NULL, 1);
 | 
						|
static SENSOR_DEVICE_ATTR(temp3_max_alarm, S_IRUGO,
 | 
						|
			  show_temp_max_alarm, NULL, 2);
 | 
						|
static SENSOR_DEVICE_ATTR(temp4_max_alarm, S_IRUGO,
 | 
						|
			  show_temp_max_alarm, NULL, 3);
 | 
						|
static SENSOR_DEVICE_ATTR(temp5_max_alarm, S_IRUGO,
 | 
						|
			  show_temp_max_alarm, NULL, 4);
 | 
						|
static SENSOR_DEVICE_ATTR(temp6_max_alarm, S_IRUGO,
 | 
						|
			  show_temp_max_alarm, NULL, 5);
 | 
						|
 | 
						|
static SENSOR_DEVICE_ATTR(temp1_crit_alarm, S_IRUGO,
 | 
						|
			  show_temp_crit_alarm, NULL, 0);
 | 
						|
static SENSOR_DEVICE_ATTR(temp2_crit_alarm, S_IRUGO,
 | 
						|
			  show_temp_crit_alarm, NULL, 1);
 | 
						|
static SENSOR_DEVICE_ATTR(temp3_crit_alarm, S_IRUGO,
 | 
						|
			  show_temp_crit_alarm, NULL, 2);
 | 
						|
static SENSOR_DEVICE_ATTR(temp4_crit_alarm, S_IRUGO,
 | 
						|
			  show_temp_crit_alarm, NULL, 3);
 | 
						|
static SENSOR_DEVICE_ATTR(temp5_crit_alarm, S_IRUGO,
 | 
						|
			  show_temp_crit_alarm, NULL, 4);
 | 
						|
static SENSOR_DEVICE_ATTR(temp6_crit_alarm, S_IRUGO,
 | 
						|
			  show_temp_crit_alarm, NULL, 5);
 | 
						|
 | 
						|
static SENSOR_DEVICE_ATTR(temp1_fault, S_IRUGO, show_temp_fault, NULL, 0);
 | 
						|
static SENSOR_DEVICE_ATTR(temp2_fault, S_IRUGO, show_temp_fault, NULL, 1);
 | 
						|
static SENSOR_DEVICE_ATTR(temp3_fault, S_IRUGO, show_temp_fault, NULL, 2);
 | 
						|
static SENSOR_DEVICE_ATTR(temp4_fault, S_IRUGO, show_temp_fault, NULL, 3);
 | 
						|
static SENSOR_DEVICE_ATTR(temp5_fault, S_IRUGO, show_temp_fault, NULL, 4);
 | 
						|
static SENSOR_DEVICE_ATTR(temp6_fault, S_IRUGO, show_temp_fault, NULL, 5);
 | 
						|
 | 
						|
static struct attribute *pc87427_attributes_temp[6][10] = {
 | 
						|
	{
 | 
						|
		&sensor_dev_attr_temp1_input.dev_attr.attr,
 | 
						|
		&sensor_dev_attr_temp1_min.dev_attr.attr,
 | 
						|
		&sensor_dev_attr_temp1_max.dev_attr.attr,
 | 
						|
		&sensor_dev_attr_temp1_crit.dev_attr.attr,
 | 
						|
		&sensor_dev_attr_temp1_type.dev_attr.attr,
 | 
						|
		&sensor_dev_attr_temp1_min_alarm.dev_attr.attr,
 | 
						|
		&sensor_dev_attr_temp1_max_alarm.dev_attr.attr,
 | 
						|
		&sensor_dev_attr_temp1_crit_alarm.dev_attr.attr,
 | 
						|
		&sensor_dev_attr_temp1_fault.dev_attr.attr,
 | 
						|
		NULL
 | 
						|
	}, {
 | 
						|
		&sensor_dev_attr_temp2_input.dev_attr.attr,
 | 
						|
		&sensor_dev_attr_temp2_min.dev_attr.attr,
 | 
						|
		&sensor_dev_attr_temp2_max.dev_attr.attr,
 | 
						|
		&sensor_dev_attr_temp2_crit.dev_attr.attr,
 | 
						|
		&sensor_dev_attr_temp2_type.dev_attr.attr,
 | 
						|
		&sensor_dev_attr_temp2_min_alarm.dev_attr.attr,
 | 
						|
		&sensor_dev_attr_temp2_max_alarm.dev_attr.attr,
 | 
						|
		&sensor_dev_attr_temp2_crit_alarm.dev_attr.attr,
 | 
						|
		&sensor_dev_attr_temp2_fault.dev_attr.attr,
 | 
						|
		NULL
 | 
						|
	}, {
 | 
						|
		&sensor_dev_attr_temp3_input.dev_attr.attr,
 | 
						|
		&sensor_dev_attr_temp3_min.dev_attr.attr,
 | 
						|
		&sensor_dev_attr_temp3_max.dev_attr.attr,
 | 
						|
		&sensor_dev_attr_temp3_crit.dev_attr.attr,
 | 
						|
		&sensor_dev_attr_temp3_type.dev_attr.attr,
 | 
						|
		&sensor_dev_attr_temp3_min_alarm.dev_attr.attr,
 | 
						|
		&sensor_dev_attr_temp3_max_alarm.dev_attr.attr,
 | 
						|
		&sensor_dev_attr_temp3_crit_alarm.dev_attr.attr,
 | 
						|
		&sensor_dev_attr_temp3_fault.dev_attr.attr,
 | 
						|
		NULL
 | 
						|
	}, {
 | 
						|
		&sensor_dev_attr_temp4_input.dev_attr.attr,
 | 
						|
		&sensor_dev_attr_temp4_min.dev_attr.attr,
 | 
						|
		&sensor_dev_attr_temp4_max.dev_attr.attr,
 | 
						|
		&sensor_dev_attr_temp4_crit.dev_attr.attr,
 | 
						|
		&sensor_dev_attr_temp4_type.dev_attr.attr,
 | 
						|
		&sensor_dev_attr_temp4_min_alarm.dev_attr.attr,
 | 
						|
		&sensor_dev_attr_temp4_max_alarm.dev_attr.attr,
 | 
						|
		&sensor_dev_attr_temp4_crit_alarm.dev_attr.attr,
 | 
						|
		&sensor_dev_attr_temp4_fault.dev_attr.attr,
 | 
						|
		NULL
 | 
						|
	}, {
 | 
						|
		&sensor_dev_attr_temp5_input.dev_attr.attr,
 | 
						|
		&sensor_dev_attr_temp5_min.dev_attr.attr,
 | 
						|
		&sensor_dev_attr_temp5_max.dev_attr.attr,
 | 
						|
		&sensor_dev_attr_temp5_crit.dev_attr.attr,
 | 
						|
		&sensor_dev_attr_temp5_type.dev_attr.attr,
 | 
						|
		&sensor_dev_attr_temp5_min_alarm.dev_attr.attr,
 | 
						|
		&sensor_dev_attr_temp5_max_alarm.dev_attr.attr,
 | 
						|
		&sensor_dev_attr_temp5_crit_alarm.dev_attr.attr,
 | 
						|
		&sensor_dev_attr_temp5_fault.dev_attr.attr,
 | 
						|
		NULL
 | 
						|
	}, {
 | 
						|
		&sensor_dev_attr_temp6_input.dev_attr.attr,
 | 
						|
		&sensor_dev_attr_temp6_min.dev_attr.attr,
 | 
						|
		&sensor_dev_attr_temp6_max.dev_attr.attr,
 | 
						|
		&sensor_dev_attr_temp6_crit.dev_attr.attr,
 | 
						|
		&sensor_dev_attr_temp6_type.dev_attr.attr,
 | 
						|
		&sensor_dev_attr_temp6_min_alarm.dev_attr.attr,
 | 
						|
		&sensor_dev_attr_temp6_max_alarm.dev_attr.attr,
 | 
						|
		&sensor_dev_attr_temp6_crit_alarm.dev_attr.attr,
 | 
						|
		&sensor_dev_attr_temp6_fault.dev_attr.attr,
 | 
						|
		NULL
 | 
						|
	}
 | 
						|
};
 | 
						|
 | 
						|
static const struct attribute_group pc87427_group_temp[6] = {
 | 
						|
	{ .attrs = pc87427_attributes_temp[0] },
 | 
						|
	{ .attrs = pc87427_attributes_temp[1] },
 | 
						|
	{ .attrs = pc87427_attributes_temp[2] },
 | 
						|
	{ .attrs = pc87427_attributes_temp[3] },
 | 
						|
	{ .attrs = pc87427_attributes_temp[4] },
 | 
						|
	{ .attrs = pc87427_attributes_temp[5] },
 | 
						|
};
 | 
						|
 | 
						|
static ssize_t show_name(struct device *dev, struct device_attribute
 | 
						|
			 *devattr, char *buf)
 | 
						|
{
 | 
						|
	struct pc87427_data *data = dev_get_drvdata(dev);
 | 
						|
 | 
						|
	return sprintf(buf, "%s\n", data->name);
 | 
						|
}
 | 
						|
static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
 | 
						|
 | 
						|
 | 
						|
/*
 | 
						|
 * Device detection, attach and detach
 | 
						|
 */
 | 
						|
 | 
						|
static int pc87427_request_regions(struct platform_device *pdev,
 | 
						|
					     int count)
 | 
						|
{
 | 
						|
	struct resource *res;
 | 
						|
	int i;
 | 
						|
 | 
						|
	for (i = 0; i < count; i++) {
 | 
						|
		res = platform_get_resource(pdev, IORESOURCE_IO, i);
 | 
						|
		if (!res) {
 | 
						|
			dev_err(&pdev->dev, "Missing resource #%d\n", i);
 | 
						|
			return -ENOENT;
 | 
						|
		}
 | 
						|
		if (!devm_request_region(&pdev->dev, res->start,
 | 
						|
					 resource_size(res), DRVNAME)) {
 | 
						|
			dev_err(&pdev->dev,
 | 
						|
				"Failed to request region 0x%lx-0x%lx\n",
 | 
						|
				(unsigned long)res->start,
 | 
						|
				(unsigned long)res->end);
 | 
						|
			return -EBUSY;
 | 
						|
		}
 | 
						|
	}
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static void pc87427_init_device(struct device *dev)
 | 
						|
{
 | 
						|
	struct pc87427_sio_data *sio_data = dev_get_platdata(dev);
 | 
						|
	struct pc87427_data *data = dev_get_drvdata(dev);
 | 
						|
	int i;
 | 
						|
	u8 reg;
 | 
						|
 | 
						|
	/* The FMC module should be ready */
 | 
						|
	reg = pc87427_read8(data, LD_FAN, PC87427_REG_BANK);
 | 
						|
	if (!(reg & 0x80))
 | 
						|
		dev_warn(dev, "%s module not ready!\n", "FMC");
 | 
						|
 | 
						|
	/* Check which fans are enabled */
 | 
						|
	for (i = 0; i < 8; i++) {
 | 
						|
		if (!(sio_data->has_fanin & (1 << i)))	/* Not wired */
 | 
						|
			continue;
 | 
						|
		reg = pc87427_read8_bank(data, LD_FAN, BANK_FM(i),
 | 
						|
					 PC87427_REG_FAN_STATUS);
 | 
						|
		if (reg & FAN_STATUS_MONEN)
 | 
						|
			data->fan_enabled |= (1 << i);
 | 
						|
	}
 | 
						|
 | 
						|
	if (!data->fan_enabled) {
 | 
						|
		dev_dbg(dev, "Enabling monitoring of all fans\n");
 | 
						|
		for (i = 0; i < 8; i++) {
 | 
						|
			if (!(sio_data->has_fanin & (1 << i)))	/* Not wired */
 | 
						|
				continue;
 | 
						|
			pc87427_write8_bank(data, LD_FAN, BANK_FM(i),
 | 
						|
					    PC87427_REG_FAN_STATUS,
 | 
						|
					    FAN_STATUS_MONEN);
 | 
						|
		}
 | 
						|
		data->fan_enabled = sio_data->has_fanin;
 | 
						|
	}
 | 
						|
 | 
						|
	/* Check which PWM outputs are enabled */
 | 
						|
	for (i = 0; i < 4; i++) {
 | 
						|
		if (!(sio_data->has_fanout & (1 << i)))	/* Not wired */
 | 
						|
			continue;
 | 
						|
		reg = pc87427_read8_bank(data, LD_FAN, BANK_FC(i),
 | 
						|
					 PC87427_REG_PWM_ENABLE);
 | 
						|
		if (reg & PWM_ENABLE_CTLEN)
 | 
						|
			data->pwm_enabled |= (1 << i);
 | 
						|
 | 
						|
		/*
 | 
						|
		 * We don't expose an interface to reconfigure the automatic
 | 
						|
		 * fan control mode, so only allow to return to this mode if
 | 
						|
		 * it was originally set.
 | 
						|
		 */
 | 
						|
		if ((reg & PWM_ENABLE_MODE_MASK) == PWM_MODE_AUTO) {
 | 
						|
			dev_dbg(dev, "PWM%d is in automatic control mode\n",
 | 
						|
				i + 1);
 | 
						|
			data->pwm_auto_ok |= (1 << i);
 | 
						|
		}
 | 
						|
	}
 | 
						|
 | 
						|
	/* The HMC module should be ready */
 | 
						|
	reg = pc87427_read8(data, LD_TEMP, PC87427_REG_BANK);
 | 
						|
	if (!(reg & 0x80))
 | 
						|
		dev_warn(dev, "%s module not ready!\n", "HMC");
 | 
						|
 | 
						|
	/* Check which temperature channels are enabled */
 | 
						|
	for (i = 0; i < 6; i++) {
 | 
						|
		reg = pc87427_read8_bank(data, LD_TEMP, BANK_TM(i),
 | 
						|
					 PC87427_REG_TEMP_STATUS);
 | 
						|
		if (reg & TEMP_STATUS_CHANEN)
 | 
						|
			data->temp_enabled |= (1 << i);
 | 
						|
	}
 | 
						|
}
 | 
						|
 | 
						|
static void pc87427_remove_files(struct device *dev)
 | 
						|
{
 | 
						|
	struct pc87427_data *data = dev_get_drvdata(dev);
 | 
						|
	int i;
 | 
						|
 | 
						|
	device_remove_file(dev, &dev_attr_name);
 | 
						|
	for (i = 0; i < 8; i++) {
 | 
						|
		if (!(data->fan_enabled & (1 << i)))
 | 
						|
			continue;
 | 
						|
		sysfs_remove_group(&dev->kobj, &pc87427_group_fan[i]);
 | 
						|
	}
 | 
						|
	for (i = 0; i < 4; i++) {
 | 
						|
		if (!(data->pwm_enabled & (1 << i)))
 | 
						|
			continue;
 | 
						|
		sysfs_remove_group(&dev->kobj, &pc87427_group_pwm[i]);
 | 
						|
	}
 | 
						|
	for (i = 0; i < 6; i++) {
 | 
						|
		if (!(data->temp_enabled & (1 << i)))
 | 
						|
			continue;
 | 
						|
		sysfs_remove_group(&dev->kobj, &pc87427_group_temp[i]);
 | 
						|
	}
 | 
						|
}
 | 
						|
 | 
						|
static int pc87427_probe(struct platform_device *pdev)
 | 
						|
{
 | 
						|
	struct pc87427_sio_data *sio_data = dev_get_platdata(&pdev->dev);
 | 
						|
	struct pc87427_data *data;
 | 
						|
	int i, err, res_count;
 | 
						|
 | 
						|
	data = devm_kzalloc(&pdev->dev, sizeof(struct pc87427_data),
 | 
						|
			    GFP_KERNEL);
 | 
						|
	if (!data)
 | 
						|
		return -ENOMEM;
 | 
						|
 | 
						|
	data->address[0] = sio_data->address[0];
 | 
						|
	data->address[1] = sio_data->address[1];
 | 
						|
	res_count = (data->address[0] != 0) + (data->address[1] != 0);
 | 
						|
 | 
						|
	err = pc87427_request_regions(pdev, res_count);
 | 
						|
	if (err)
 | 
						|
		return err;
 | 
						|
 | 
						|
	mutex_init(&data->lock);
 | 
						|
	data->name = "pc87427";
 | 
						|
	platform_set_drvdata(pdev, data);
 | 
						|
	pc87427_init_device(&pdev->dev);
 | 
						|
 | 
						|
	/* Register sysfs hooks */
 | 
						|
	err = device_create_file(&pdev->dev, &dev_attr_name);
 | 
						|
	if (err)
 | 
						|
		return err;
 | 
						|
	for (i = 0; i < 8; i++) {
 | 
						|
		if (!(data->fan_enabled & (1 << i)))
 | 
						|
			continue;
 | 
						|
		err = sysfs_create_group(&pdev->dev.kobj,
 | 
						|
					 &pc87427_group_fan[i]);
 | 
						|
		if (err)
 | 
						|
			goto exit_remove_files;
 | 
						|
	}
 | 
						|
	for (i = 0; i < 4; i++) {
 | 
						|
		if (!(data->pwm_enabled & (1 << i)))
 | 
						|
			continue;
 | 
						|
		err = sysfs_create_group(&pdev->dev.kobj,
 | 
						|
					 &pc87427_group_pwm[i]);
 | 
						|
		if (err)
 | 
						|
			goto exit_remove_files;
 | 
						|
	}
 | 
						|
	for (i = 0; i < 6; i++) {
 | 
						|
		if (!(data->temp_enabled & (1 << i)))
 | 
						|
			continue;
 | 
						|
		err = sysfs_create_group(&pdev->dev.kobj,
 | 
						|
					 &pc87427_group_temp[i]);
 | 
						|
		if (err)
 | 
						|
			goto exit_remove_files;
 | 
						|
	}
 | 
						|
 | 
						|
	data->hwmon_dev = hwmon_device_register(&pdev->dev);
 | 
						|
	if (IS_ERR(data->hwmon_dev)) {
 | 
						|
		err = PTR_ERR(data->hwmon_dev);
 | 
						|
		dev_err(&pdev->dev, "Class registration failed (%d)\n", err);
 | 
						|
		goto exit_remove_files;
 | 
						|
	}
 | 
						|
 | 
						|
	return 0;
 | 
						|
 | 
						|
exit_remove_files:
 | 
						|
	pc87427_remove_files(&pdev->dev);
 | 
						|
	return err;
 | 
						|
}
 | 
						|
 | 
						|
static int pc87427_remove(struct platform_device *pdev)
 | 
						|
{
 | 
						|
	struct pc87427_data *data = platform_get_drvdata(pdev);
 | 
						|
 | 
						|
	hwmon_device_unregister(data->hwmon_dev);
 | 
						|
	pc87427_remove_files(&pdev->dev);
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
 | 
						|
static struct platform_driver pc87427_driver = {
 | 
						|
	.driver = {
 | 
						|
		.owner	= THIS_MODULE,
 | 
						|
		.name	= DRVNAME,
 | 
						|
	},
 | 
						|
	.probe		= pc87427_probe,
 | 
						|
	.remove		= pc87427_remove,
 | 
						|
};
 | 
						|
 | 
						|
static int __init pc87427_device_add(const struct pc87427_sio_data *sio_data)
 | 
						|
{
 | 
						|
	struct resource res[2] = {
 | 
						|
		{ .flags	= IORESOURCE_IO },
 | 
						|
		{ .flags	= IORESOURCE_IO },
 | 
						|
	};
 | 
						|
	int err, i, res_count;
 | 
						|
 | 
						|
	res_count = 0;
 | 
						|
	for (i = 0; i < 2; i++) {
 | 
						|
		if (!sio_data->address[i])
 | 
						|
			continue;
 | 
						|
		res[res_count].start = sio_data->address[i];
 | 
						|
		res[res_count].end = sio_data->address[i] + REGION_LENGTH - 1;
 | 
						|
		res[res_count].name = logdev_str[i];
 | 
						|
 | 
						|
		err = acpi_check_resource_conflict(&res[res_count]);
 | 
						|
		if (err)
 | 
						|
			goto exit;
 | 
						|
 | 
						|
		res_count++;
 | 
						|
	}
 | 
						|
 | 
						|
	pdev = platform_device_alloc(DRVNAME, res[0].start);
 | 
						|
	if (!pdev) {
 | 
						|
		err = -ENOMEM;
 | 
						|
		pr_err("Device allocation failed\n");
 | 
						|
		goto exit;
 | 
						|
	}
 | 
						|
 | 
						|
	err = platform_device_add_resources(pdev, res, res_count);
 | 
						|
	if (err) {
 | 
						|
		pr_err("Device resource addition failed (%d)\n", err);
 | 
						|
		goto exit_device_put;
 | 
						|
	}
 | 
						|
 | 
						|
	err = platform_device_add_data(pdev, sio_data,
 | 
						|
				       sizeof(struct pc87427_sio_data));
 | 
						|
	if (err) {
 | 
						|
		pr_err("Platform data allocation failed\n");
 | 
						|
		goto exit_device_put;
 | 
						|
	}
 | 
						|
 | 
						|
	err = platform_device_add(pdev);
 | 
						|
	if (err) {
 | 
						|
		pr_err("Device addition failed (%d)\n", err);
 | 
						|
		goto exit_device_put;
 | 
						|
	}
 | 
						|
 | 
						|
	return 0;
 | 
						|
 | 
						|
exit_device_put:
 | 
						|
	platform_device_put(pdev);
 | 
						|
exit:
 | 
						|
	return err;
 | 
						|
}
 | 
						|
 | 
						|
static int __init pc87427_find(int sioaddr, struct pc87427_sio_data *sio_data)
 | 
						|
{
 | 
						|
	u16 val;
 | 
						|
	u8 cfg, cfg_b;
 | 
						|
	int i, err = 0;
 | 
						|
 | 
						|
	/* Identify device */
 | 
						|
	val = force_id ? force_id : superio_inb(sioaddr, SIOREG_DEVID);
 | 
						|
	if (val != 0xf2) {	/* PC87427 */
 | 
						|
		err = -ENODEV;
 | 
						|
		goto exit;
 | 
						|
	}
 | 
						|
 | 
						|
	for (i = 0; i < 2; i++) {
 | 
						|
		sio_data->address[i] = 0;
 | 
						|
		/* Select logical device */
 | 
						|
		superio_outb(sioaddr, SIOREG_LDSEL, logdev[i]);
 | 
						|
 | 
						|
		val = superio_inb(sioaddr, SIOREG_ACT);
 | 
						|
		if (!(val & 0x01)) {
 | 
						|
			pr_info("Logical device 0x%02x not activated\n",
 | 
						|
				logdev[i]);
 | 
						|
			continue;
 | 
						|
		}
 | 
						|
 | 
						|
		val = superio_inb(sioaddr, SIOREG_MAP);
 | 
						|
		if (val & 0x01) {
 | 
						|
			pr_warn("Logical device 0x%02x is memory-mapped, can't use\n",
 | 
						|
				logdev[i]);
 | 
						|
			continue;
 | 
						|
		}
 | 
						|
 | 
						|
		val = (superio_inb(sioaddr, SIOREG_IOBASE) << 8)
 | 
						|
		    | superio_inb(sioaddr, SIOREG_IOBASE + 1);
 | 
						|
		if (!val) {
 | 
						|
			pr_info("I/O base address not set for logical device 0x%02x\n",
 | 
						|
				logdev[i]);
 | 
						|
			continue;
 | 
						|
		}
 | 
						|
		sio_data->address[i] = val;
 | 
						|
	}
 | 
						|
 | 
						|
	/* No point in loading the driver if everything is disabled */
 | 
						|
	if (!sio_data->address[0] && !sio_data->address[1]) {
 | 
						|
		err = -ENODEV;
 | 
						|
		goto exit;
 | 
						|
	}
 | 
						|
 | 
						|
	/* Check which fan inputs are wired */
 | 
						|
	sio_data->has_fanin = (1 << 2) | (1 << 3);	/* FANIN2, FANIN3 */
 | 
						|
 | 
						|
	cfg = superio_inb(sioaddr, SIOREG_CF2);
 | 
						|
	if (!(cfg & (1 << 3)))
 | 
						|
		sio_data->has_fanin |= (1 << 0);	/* FANIN0 */
 | 
						|
	if (!(cfg & (1 << 2)))
 | 
						|
		sio_data->has_fanin |= (1 << 4);	/* FANIN4 */
 | 
						|
 | 
						|
	cfg = superio_inb(sioaddr, SIOREG_CFD);
 | 
						|
	if (!(cfg & (1 << 0)))
 | 
						|
		sio_data->has_fanin |= (1 << 1);	/* FANIN1 */
 | 
						|
 | 
						|
	cfg = superio_inb(sioaddr, SIOREG_CF4);
 | 
						|
	if (!(cfg & (1 << 0)))
 | 
						|
		sio_data->has_fanin |= (1 << 7);	/* FANIN7 */
 | 
						|
	cfg_b = superio_inb(sioaddr, SIOREG_CFB);
 | 
						|
	if (!(cfg & (1 << 1)) && (cfg_b & (1 << 3)))
 | 
						|
		sio_data->has_fanin |= (1 << 5);	/* FANIN5 */
 | 
						|
	cfg = superio_inb(sioaddr, SIOREG_CF3);
 | 
						|
	if ((cfg & (1 << 3)) && !(cfg_b & (1 << 5)))
 | 
						|
		sio_data->has_fanin |= (1 << 6);	/* FANIN6 */
 | 
						|
 | 
						|
	/* Check which fan outputs are wired */
 | 
						|
	sio_data->has_fanout = (1 << 0);		/* FANOUT0 */
 | 
						|
	if (cfg_b & (1 << 0))
 | 
						|
		sio_data->has_fanout |= (1 << 3);	/* FANOUT3 */
 | 
						|
 | 
						|
	cfg = superio_inb(sioaddr, SIOREG_CFC);
 | 
						|
	if (!(cfg & (1 << 4))) {
 | 
						|
		if (cfg_b & (1 << 1))
 | 
						|
			sio_data->has_fanout |= (1 << 1); /* FANOUT1 */
 | 
						|
		if (cfg_b & (1 << 2))
 | 
						|
			sio_data->has_fanout |= (1 << 2); /* FANOUT2 */
 | 
						|
	}
 | 
						|
 | 
						|
	/* FANOUT1 and FANOUT2 can each be routed to 2 different pins */
 | 
						|
	cfg = superio_inb(sioaddr, SIOREG_CF5);
 | 
						|
	if (cfg & (1 << 6))
 | 
						|
		sio_data->has_fanout |= (1 << 1);	/* FANOUT1 */
 | 
						|
	if (cfg & (1 << 5))
 | 
						|
		sio_data->has_fanout |= (1 << 2);	/* FANOUT2 */
 | 
						|
 | 
						|
exit:
 | 
						|
	superio_exit(sioaddr);
 | 
						|
	return err;
 | 
						|
}
 | 
						|
 | 
						|
static int __init pc87427_init(void)
 | 
						|
{
 | 
						|
	int err;
 | 
						|
	struct pc87427_sio_data sio_data;
 | 
						|
 | 
						|
	if (pc87427_find(0x2e, &sio_data)
 | 
						|
	 && pc87427_find(0x4e, &sio_data))
 | 
						|
		return -ENODEV;
 | 
						|
 | 
						|
	err = platform_driver_register(&pc87427_driver);
 | 
						|
	if (err)
 | 
						|
		goto exit;
 | 
						|
 | 
						|
	/* Sets global pdev as a side effect */
 | 
						|
	err = pc87427_device_add(&sio_data);
 | 
						|
	if (err)
 | 
						|
		goto exit_driver;
 | 
						|
 | 
						|
	return 0;
 | 
						|
 | 
						|
exit_driver:
 | 
						|
	platform_driver_unregister(&pc87427_driver);
 | 
						|
exit:
 | 
						|
	return err;
 | 
						|
}
 | 
						|
 | 
						|
static void __exit pc87427_exit(void)
 | 
						|
{
 | 
						|
	platform_device_unregister(pdev);
 | 
						|
	platform_driver_unregister(&pc87427_driver);
 | 
						|
}
 | 
						|
 | 
						|
MODULE_AUTHOR("Jean Delvare <jdelvare@suse.de>");
 | 
						|
MODULE_DESCRIPTION("PC87427 hardware monitoring driver");
 | 
						|
MODULE_LICENSE("GPL");
 | 
						|
 | 
						|
module_init(pc87427_init);
 | 
						|
module_exit(pc87427_exit);
 |