 6b01d30eef
			
		
	
	
	6b01d30eef
	
	
	
		
			
			At present the module does not unset the NO_REBOOT bit upon shutdown, this
causes the BIOS to fail the POST once and reset. During the next boot it
displays the following error message:
***** Warning: System BOOT Fail *****
Your system last boot fail or POST interrupted.
Please enter setup to load default and reboot again.
Press F1 to continue, DEL to enter SETUP
With this patch the NO_REBOOT flag will be unset on shutdown and thus stop
this failure from occurring.
Tested on 'ASUS P5N32-E SLI with BIOS revision 1801' and
          'ASUS P5N32-E SLI PLUS with BIOS revision 1502'.
Signed-off-by: Mart Gerrits <mart1987@gmail.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
		
	
			
		
			
				
	
	
		
			520 lines
		
	
	
	
		
			12 KiB
			
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			520 lines
		
	
	
	
		
			12 KiB
			
		
	
	
	
		
			C
		
	
	
	
	
	
| /*
 | |
|  *	nv_tco 0.01:	TCO timer driver for NV chipsets
 | |
|  *
 | |
|  *	(c) Copyright 2005 Google Inc., All Rights Reserved.
 | |
|  *
 | |
|  *	Based off i8xx_tco.c:
 | |
|  *	(c) Copyright 2000 kernel concepts <nils@kernelconcepts.de>, All Rights
 | |
|  *	Reserved.
 | |
|  *				http://www.kernelconcepts.de
 | |
|  *
 | |
|  *	This program is free software; you can redistribute it and/or
 | |
|  *	modify it under the terms of the GNU General Public License
 | |
|  *	as published by the Free Software Foundation; either version
 | |
|  *	2 of the License, or (at your option) any later version.
 | |
|  *
 | |
|  *	TCO timer driver for NV chipsets
 | |
|  *	based on softdog.c by Alan Cox <alan@redhat.com>
 | |
|  */
 | |
| 
 | |
| /*
 | |
|  *	Includes, defines, variables, module parameters, ...
 | |
|  */
 | |
| 
 | |
| #include <linux/module.h>
 | |
| #include <linux/moduleparam.h>
 | |
| #include <linux/types.h>
 | |
| #include <linux/miscdevice.h>
 | |
| #include <linux/watchdog.h>
 | |
| #include <linux/init.h>
 | |
| #include <linux/fs.h>
 | |
| #include <linux/pci.h>
 | |
| #include <linux/ioport.h>
 | |
| #include <linux/jiffies.h>
 | |
| #include <linux/platform_device.h>
 | |
| #include <linux/uaccess.h>
 | |
| #include <linux/io.h>
 | |
| 
 | |
| #include "nv_tco.h"
 | |
| 
 | |
| /* Module and version information */
 | |
| #define TCO_VERSION "0.01"
 | |
| #define TCO_MODULE_NAME "NV_TCO"
 | |
| #define TCO_DRIVER_NAME   TCO_MODULE_NAME ", v" TCO_VERSION
 | |
| #define PFX TCO_MODULE_NAME ": "
 | |
| 
 | |
| /* internal variables */
 | |
| static unsigned int tcobase;
 | |
| static DEFINE_SPINLOCK(tco_lock);	/* Guards the hardware */
 | |
| static unsigned long timer_alive;
 | |
| static char tco_expect_close;
 | |
| static struct pci_dev *tco_pci;
 | |
| 
 | |
| /* the watchdog platform device */
 | |
| static struct platform_device *nv_tco_platform_device;
 | |
| 
 | |
| /* module parameters */
 | |
| #define WATCHDOG_HEARTBEAT 30	/* 30 sec default heartbeat (2<heartbeat<39) */
 | |
| static int heartbeat = WATCHDOG_HEARTBEAT;  /* in seconds */
 | |
| module_param(heartbeat, int, 0);
 | |
| MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds. (2<heartbeat<39, "
 | |
| 			    "default=" __MODULE_STRING(WATCHDOG_HEARTBEAT) ")");
 | |
| 
 | |
| static int nowayout = WATCHDOG_NOWAYOUT;
 | |
| module_param(nowayout, int, 0);
 | |
| MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started"
 | |
| 		" (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
 | |
| 
 | |
| /*
 | |
|  * Some TCO specific functions
 | |
|  */
 | |
| static inline unsigned char seconds_to_ticks(int seconds)
 | |
| {
 | |
| 	/* the internal timer is stored as ticks which decrement
 | |
| 	 * every 0.6 seconds */
 | |
| 	return (seconds * 10) / 6;
 | |
| }
 | |
| 
 | |
| static void tco_timer_start(void)
 | |
| {
 | |
| 	u32 val;
 | |
| 	unsigned long flags;
 | |
| 
 | |
| 	spin_lock_irqsave(&tco_lock, flags);
 | |
| 	val = inl(TCO_CNT(tcobase));
 | |
| 	val &= ~TCO_CNT_TCOHALT;
 | |
| 	outl(val, TCO_CNT(tcobase));
 | |
| 	spin_unlock_irqrestore(&tco_lock, flags);
 | |
| }
 | |
| 
 | |
| static void tco_timer_stop(void)
 | |
| {
 | |
| 	u32 val;
 | |
| 	unsigned long flags;
 | |
| 
 | |
| 	spin_lock_irqsave(&tco_lock, flags);
 | |
| 	val = inl(TCO_CNT(tcobase));
 | |
| 	val |= TCO_CNT_TCOHALT;
 | |
| 	outl(val, TCO_CNT(tcobase));
 | |
| 	spin_unlock_irqrestore(&tco_lock, flags);
 | |
| }
 | |
| 
 | |
| static void tco_timer_keepalive(void)
 | |
| {
 | |
| 	unsigned long flags;
 | |
| 
 | |
| 	spin_lock_irqsave(&tco_lock, flags);
 | |
| 	outb(0x01, TCO_RLD(tcobase));
 | |
| 	spin_unlock_irqrestore(&tco_lock, flags);
 | |
| }
 | |
| 
 | |
| static int tco_timer_set_heartbeat(int t)
 | |
| {
 | |
| 	int ret = 0;
 | |
| 	unsigned char tmrval;
 | |
| 	unsigned long flags;
 | |
| 	u8 val;
 | |
| 
 | |
| 	/*
 | |
| 	 * note seconds_to_ticks(t) > t, so if t > 0x3f, so is
 | |
| 	 * tmrval=seconds_to_ticks(t).  Check that the count in seconds isn't
 | |
| 	 * out of range on it's own (to avoid overflow in tmrval).
 | |
| 	 */
 | |
| 	if (t < 0 || t > 0x3f)
 | |
| 		return -EINVAL;
 | |
| 	tmrval = seconds_to_ticks(t);
 | |
| 
 | |
| 	/* "Values of 0h-3h are ignored and should not be attempted" */
 | |
| 	if (tmrval > 0x3f || tmrval < 0x04)
 | |
| 		return -EINVAL;
 | |
| 
 | |
| 	/* Write new heartbeat to watchdog */
 | |
| 	spin_lock_irqsave(&tco_lock, flags);
 | |
| 	val = inb(TCO_TMR(tcobase));
 | |
| 	val &= 0xc0;
 | |
| 	val |= tmrval;
 | |
| 	outb(val, TCO_TMR(tcobase));
 | |
| 	val = inb(TCO_TMR(tcobase));
 | |
| 
 | |
| 	if ((val & 0x3f) != tmrval)
 | |
| 		ret = -EINVAL;
 | |
| 	spin_unlock_irqrestore(&tco_lock, flags);
 | |
| 
 | |
| 	if (ret)
 | |
| 		return ret;
 | |
| 
 | |
| 	heartbeat = t;
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| /*
 | |
|  *	/dev/watchdog handling
 | |
|  */
 | |
| 
 | |
| static int nv_tco_open(struct inode *inode, struct file *file)
 | |
| {
 | |
| 	/* /dev/watchdog can only be opened once */
 | |
| 	if (test_and_set_bit(0, &timer_alive))
 | |
| 		return -EBUSY;
 | |
| 
 | |
| 	/* Reload and activate timer */
 | |
| 	tco_timer_keepalive();
 | |
| 	tco_timer_start();
 | |
| 	return nonseekable_open(inode, file);
 | |
| }
 | |
| 
 | |
| static int nv_tco_release(struct inode *inode, struct file *file)
 | |
| {
 | |
| 	/* Shut off the timer */
 | |
| 	if (tco_expect_close == 42) {
 | |
| 		tco_timer_stop();
 | |
| 	} else {
 | |
| 		printk(KERN_CRIT PFX "Unexpected close, not stopping "
 | |
| 		       "watchdog!\n");
 | |
| 		tco_timer_keepalive();
 | |
| 	}
 | |
| 	clear_bit(0, &timer_alive);
 | |
| 	tco_expect_close = 0;
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static ssize_t nv_tco_write(struct file *file, const char __user *data,
 | |
| 			    size_t len, loff_t *ppos)
 | |
| {
 | |
| 	/* See if we got the magic character 'V' and reload the timer */
 | |
| 	if (len) {
 | |
| 		if (!nowayout) {
 | |
| 			size_t i;
 | |
| 
 | |
| 			/*
 | |
| 			 * note: just in case someone wrote the magic character
 | |
| 			 * five months ago...
 | |
| 			 */
 | |
| 			tco_expect_close = 0;
 | |
| 
 | |
| 			/*
 | |
| 			 * scan to see whether or not we got the magic
 | |
| 			 * character
 | |
| 			 */
 | |
| 			for (i = 0; i != len; i++) {
 | |
| 				char c;
 | |
| 				if (get_user(c, data + i))
 | |
| 					return -EFAULT;
 | |
| 				if (c == 'V')
 | |
| 					tco_expect_close = 42;
 | |
| 			}
 | |
| 		}
 | |
| 
 | |
| 		/* someone wrote to us, we should reload the timer */
 | |
| 		tco_timer_keepalive();
 | |
| 	}
 | |
| 	return len;
 | |
| }
 | |
| 
 | |
| static long nv_tco_ioctl(struct file *file, unsigned int cmd,
 | |
| 			 unsigned long arg)
 | |
| {
 | |
| 	int new_options, retval = -EINVAL;
 | |
| 	int new_heartbeat;
 | |
| 	void __user *argp = (void __user *)arg;
 | |
| 	int __user *p = argp;
 | |
| 	static const struct watchdog_info ident = {
 | |
| 		.options =		WDIOF_SETTIMEOUT |
 | |
| 					WDIOF_KEEPALIVEPING |
 | |
| 					WDIOF_MAGICCLOSE,
 | |
| 		.firmware_version =	0,
 | |
| 		.identity =		TCO_MODULE_NAME,
 | |
| 	};
 | |
| 
 | |
| 	switch (cmd) {
 | |
| 	case WDIOC_GETSUPPORT:
 | |
| 		return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0;
 | |
| 	case WDIOC_GETSTATUS:
 | |
| 	case WDIOC_GETBOOTSTATUS:
 | |
| 		return put_user(0, p);
 | |
| 	case WDIOC_SETOPTIONS:
 | |
| 		if (get_user(new_options, p))
 | |
| 			return -EFAULT;
 | |
| 		if (new_options & WDIOS_DISABLECARD) {
 | |
| 			tco_timer_stop();
 | |
| 			retval = 0;
 | |
| 		}
 | |
| 		if (new_options & WDIOS_ENABLECARD) {
 | |
| 			tco_timer_keepalive();
 | |
| 			tco_timer_start();
 | |
| 			retval = 0;
 | |
| 		}
 | |
| 		return retval;
 | |
| 	case WDIOC_KEEPALIVE:
 | |
| 		tco_timer_keepalive();
 | |
| 		return 0;
 | |
| 	case WDIOC_SETTIMEOUT:
 | |
| 		if (get_user(new_heartbeat, p))
 | |
| 			return -EFAULT;
 | |
| 		if (tco_timer_set_heartbeat(new_heartbeat))
 | |
| 			return -EINVAL;
 | |
| 		tco_timer_keepalive();
 | |
| 		/* Fall through */
 | |
| 	case WDIOC_GETTIMEOUT:
 | |
| 		return put_user(heartbeat, p);
 | |
| 	default:
 | |
| 		return -ENOTTY;
 | |
| 	}
 | |
| }
 | |
| 
 | |
| /*
 | |
|  *	Kernel Interfaces
 | |
|  */
 | |
| 
 | |
| static const struct file_operations nv_tco_fops = {
 | |
| 	.owner =		THIS_MODULE,
 | |
| 	.llseek =		no_llseek,
 | |
| 	.write =		nv_tco_write,
 | |
| 	.unlocked_ioctl =	nv_tco_ioctl,
 | |
| 	.open =			nv_tco_open,
 | |
| 	.release =		nv_tco_release,
 | |
| };
 | |
| 
 | |
| static struct miscdevice nv_tco_miscdev = {
 | |
| 	.minor =	WATCHDOG_MINOR,
 | |
| 	.name =		"watchdog",
 | |
| 	.fops =		&nv_tco_fops,
 | |
| };
 | |
| 
 | |
| /*
 | |
|  * Data for PCI driver interface
 | |
|  *
 | |
|  * This data only exists for exporting the supported
 | |
|  * PCI ids via MODULE_DEVICE_TABLE.  We do not actually
 | |
|  * register a pci_driver, because someone else might one day
 | |
|  * want to register another driver on the same PCI id.
 | |
|  */
 | |
| static DEFINE_PCI_DEVICE_TABLE(tco_pci_tbl) = {
 | |
| 	{ PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SMBUS,
 | |
| 	  PCI_ANY_ID, PCI_ANY_ID, },
 | |
| 	{ PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SMBUS,
 | |
| 	  PCI_ANY_ID, PCI_ANY_ID, },
 | |
| 	{ 0, },			/* End of list */
 | |
| };
 | |
| MODULE_DEVICE_TABLE(pci, tco_pci_tbl);
 | |
| 
 | |
| /*
 | |
|  *	Init & exit routines
 | |
|  */
 | |
| 
 | |
| static unsigned char __devinit nv_tco_getdevice(void)
 | |
| {
 | |
| 	struct pci_dev *dev = NULL;
 | |
| 	u32 val;
 | |
| 
 | |
| 	/* Find the PCI device */
 | |
| 	for_each_pci_dev(dev) {
 | |
| 		if (pci_match_id(tco_pci_tbl, dev) != NULL) {
 | |
| 			tco_pci = dev;
 | |
| 			break;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	if (!tco_pci)
 | |
| 		return 0;
 | |
| 
 | |
| 	/* Find the base io port */
 | |
| 	pci_read_config_dword(tco_pci, 0x64, &val);
 | |
| 	val &= 0xffff;
 | |
| 	if (val == 0x0001 || val == 0x0000) {
 | |
| 		/* Something is wrong here, bar isn't setup */
 | |
| 		printk(KERN_ERR PFX "failed to get tcobase address\n");
 | |
| 		return 0;
 | |
| 	}
 | |
| 	val &= 0xff00;
 | |
| 	tcobase = val + 0x40;
 | |
| 
 | |
| 	if (!request_region(tcobase, 0x10, "NV TCO")) {
 | |
| 		printk(KERN_ERR PFX "I/O address 0x%04x already in use\n",
 | |
| 		       tcobase);
 | |
| 		return 0;
 | |
| 	}
 | |
| 
 | |
| 	/* Set a reasonable heartbeat before we stop the timer */
 | |
| 	tco_timer_set_heartbeat(30);
 | |
| 
 | |
| 	/*
 | |
| 	 * Stop the TCO before we change anything so we don't race with
 | |
| 	 * a zeroed timer.
 | |
| 	 */
 | |
| 	tco_timer_keepalive();
 | |
| 	tco_timer_stop();
 | |
| 
 | |
| 	/* Disable SMI caused by TCO */
 | |
| 	if (!request_region(MCP51_SMI_EN(tcobase), 4, "NV TCO")) {
 | |
| 		printk(KERN_ERR PFX "I/O address 0x%04x already in use\n",
 | |
| 		       MCP51_SMI_EN(tcobase));
 | |
| 		goto out;
 | |
| 	}
 | |
| 	val = inl(MCP51_SMI_EN(tcobase));
 | |
| 	val &= ~MCP51_SMI_EN_TCO;
 | |
| 	outl(val, MCP51_SMI_EN(tcobase));
 | |
| 	val = inl(MCP51_SMI_EN(tcobase));
 | |
| 	release_region(MCP51_SMI_EN(tcobase), 4);
 | |
| 	if (val & MCP51_SMI_EN_TCO) {
 | |
| 		printk(KERN_ERR PFX "Could not disable SMI caused by TCO\n");
 | |
| 		goto out;
 | |
| 	}
 | |
| 
 | |
| 	/* Check chipset's NO_REBOOT bit */
 | |
| 	pci_read_config_dword(tco_pci, MCP51_SMBUS_SETUP_B, &val);
 | |
| 	val |= MCP51_SMBUS_SETUP_B_TCO_REBOOT;
 | |
| 	pci_write_config_dword(tco_pci, MCP51_SMBUS_SETUP_B, val);
 | |
| 	pci_read_config_dword(tco_pci, MCP51_SMBUS_SETUP_B, &val);
 | |
| 	if (!(val & MCP51_SMBUS_SETUP_B_TCO_REBOOT)) {
 | |
| 		printk(KERN_ERR PFX "failed to reset NO_REBOOT flag, reboot "
 | |
| 		       "disabled by hardware\n");
 | |
| 		goto out;
 | |
| 	}
 | |
| 
 | |
| 	return 1;
 | |
| out:
 | |
| 	release_region(tcobase, 0x10);
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int __devinit nv_tco_init(struct platform_device *dev)
 | |
| {
 | |
| 	int ret;
 | |
| 
 | |
| 	/* Check whether or not the hardware watchdog is there */
 | |
| 	if (!nv_tco_getdevice())
 | |
| 		return -ENODEV;
 | |
| 
 | |
| 	/* Check to see if last reboot was due to watchdog timeout */
 | |
| 	printk(KERN_INFO PFX "Watchdog reboot %sdetected.\n",
 | |
| 	       inl(TCO_STS(tcobase)) & TCO_STS_TCO2TO_STS ? "" : "not ");
 | |
| 
 | |
| 	/* Clear out the old status */
 | |
| 	outl(TCO_STS_RESET, TCO_STS(tcobase));
 | |
| 
 | |
| 	/*
 | |
| 	 * Check that the heartbeat value is within it's range.
 | |
| 	 * If not, reset to the default.
 | |
| 	 */
 | |
| 	if (tco_timer_set_heartbeat(heartbeat)) {
 | |
| 		heartbeat = WATCHDOG_HEARTBEAT;
 | |
| 		tco_timer_set_heartbeat(heartbeat);
 | |
| 		printk(KERN_INFO PFX "heartbeat value must be 2<heartbeat<39, "
 | |
| 		       "using %d\n", heartbeat);
 | |
| 	}
 | |
| 
 | |
| 	ret = misc_register(&nv_tco_miscdev);
 | |
| 	if (ret != 0) {
 | |
| 		printk(KERN_ERR PFX "cannot register miscdev on minor=%d "
 | |
| 		       "(err=%d)\n", WATCHDOG_MINOR, ret);
 | |
| 		goto unreg_region;
 | |
| 	}
 | |
| 
 | |
| 	clear_bit(0, &timer_alive);
 | |
| 
 | |
| 	tco_timer_stop();
 | |
| 
 | |
| 	printk(KERN_INFO PFX "initialized (0x%04x). heartbeat=%d sec "
 | |
| 	       "(nowayout=%d)\n", tcobase, heartbeat, nowayout);
 | |
| 
 | |
| 	return 0;
 | |
| 
 | |
| unreg_region:
 | |
| 	release_region(tcobase, 0x10);
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| static void __devexit nv_tco_cleanup(void)
 | |
| {
 | |
| 	u32 val;
 | |
| 
 | |
| 	/* Stop the timer before we leave */
 | |
| 	if (!nowayout)
 | |
| 		tco_timer_stop();
 | |
| 
 | |
| 	/* Set the NO_REBOOT bit to prevent later reboots, just for sure */
 | |
| 	pci_read_config_dword(tco_pci, MCP51_SMBUS_SETUP_B, &val);
 | |
| 	val &= ~MCP51_SMBUS_SETUP_B_TCO_REBOOT;
 | |
| 	pci_write_config_dword(tco_pci, MCP51_SMBUS_SETUP_B, val);
 | |
| 	pci_read_config_dword(tco_pci, MCP51_SMBUS_SETUP_B, &val);
 | |
| 	if (val & MCP51_SMBUS_SETUP_B_TCO_REBOOT) {
 | |
| 		printk(KERN_CRIT PFX "Couldn't unset REBOOT bit.  Machine may "
 | |
| 		       "soon reset\n");
 | |
| 	}
 | |
| 
 | |
| 	/* Deregister */
 | |
| 	misc_deregister(&nv_tco_miscdev);
 | |
| 	release_region(tcobase, 0x10);
 | |
| }
 | |
| 
 | |
| static int __devexit nv_tco_remove(struct platform_device *dev)
 | |
| {
 | |
| 	if (tcobase)
 | |
| 		nv_tco_cleanup();
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static void nv_tco_shutdown(struct platform_device *dev)
 | |
| {
 | |
| 	u32 val;
 | |
| 
 | |
| 	tco_timer_stop();
 | |
| 
 | |
| 	/* Some BIOSes fail the POST (once) if the NO_REBOOT flag is not
 | |
| 	 * unset during shutdown. */
 | |
| 	pci_read_config_dword(tco_pci, MCP51_SMBUS_SETUP_B, &val);
 | |
| 	val &= ~MCP51_SMBUS_SETUP_B_TCO_REBOOT;
 | |
| 	pci_write_config_dword(tco_pci, MCP51_SMBUS_SETUP_B, val);
 | |
| }
 | |
| 
 | |
| static struct platform_driver nv_tco_driver = {
 | |
| 	.probe		= nv_tco_init,
 | |
| 	.remove		= __devexit_p(nv_tco_remove),
 | |
| 	.shutdown	= nv_tco_shutdown,
 | |
| 	.driver		= {
 | |
| 		.owner	= THIS_MODULE,
 | |
| 		.name	= TCO_MODULE_NAME,
 | |
| 	},
 | |
| };
 | |
| 
 | |
| static int __init nv_tco_init_module(void)
 | |
| {
 | |
| 	int err;
 | |
| 
 | |
| 	printk(KERN_INFO PFX "NV TCO WatchDog Timer Driver v%s\n",
 | |
| 	       TCO_VERSION);
 | |
| 
 | |
| 	err = platform_driver_register(&nv_tco_driver);
 | |
| 	if (err)
 | |
| 		return err;
 | |
| 
 | |
| 	nv_tco_platform_device = platform_device_register_simple(
 | |
| 					TCO_MODULE_NAME, -1, NULL, 0);
 | |
| 	if (IS_ERR(nv_tco_platform_device)) {
 | |
| 		err = PTR_ERR(nv_tco_platform_device);
 | |
| 		goto unreg_platform_driver;
 | |
| 	}
 | |
| 
 | |
| 	return 0;
 | |
| 
 | |
| unreg_platform_driver:
 | |
| 	platform_driver_unregister(&nv_tco_driver);
 | |
| 	return err;
 | |
| }
 | |
| 
 | |
| static void __exit nv_tco_cleanup_module(void)
 | |
| {
 | |
| 	platform_device_unregister(nv_tco_platform_device);
 | |
| 	platform_driver_unregister(&nv_tco_driver);
 | |
| 	printk(KERN_INFO PFX "NV TCO Watchdog Module Unloaded.\n");
 | |
| }
 | |
| 
 | |
| module_init(nv_tco_init_module);
 | |
| module_exit(nv_tco_cleanup_module);
 | |
| 
 | |
| MODULE_AUTHOR("Mike Waychison");
 | |
| MODULE_DESCRIPTION("TCO timer driver for NV chipsets");
 | |
| MODULE_LICENSE("GPL");
 | |
| MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
 |