 388b78adc9
			
		
	
	
	388b78adc9
	
	
	
		
			
			1. Add an option to include RapidIO support if the PCI is available. 2. Add FSL_RIO configuration option to enable controller selection. 3. Add RapidIO support option into x86 and MIPS architectures. Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Acked-by: Kumar Gala <galak@kernel.crashing.org> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Li Yang <leoli@freescale.com> Cc: Thomas Moll <thomas.moll@sysgo.com> Cc: Micha Nelissen <micha@neli.hopto.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
		
			
				
	
	
		
			287 lines
		
	
	
	
		
			6.7 KiB
			
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			287 lines
		
	
	
	
		
			6.7 KiB
			
		
	
	
	
		
			C
		
	
	
	
	
	
| /*
 | |
|  * RapidIO sysfs attributes and support
 | |
|  *
 | |
|  * Copyright 2005 MontaVista Software, Inc.
 | |
|  * Matt Porter <mporter@kernel.crashing.org>
 | |
|  *
 | |
|  * This program is free software; you can redistribute  it and/or modify it
 | |
|  * under  the terms of  the GNU General  Public License as published by the
 | |
|  * Free Software Foundation;  either version 2 of the  License, or (at your
 | |
|  * option) any later version.
 | |
|  */
 | |
| 
 | |
| #include <linux/kernel.h>
 | |
| #include <linux/rio.h>
 | |
| #include <linux/rio_drv.h>
 | |
| #include <linux/stat.h>
 | |
| #include <linux/capability.h>
 | |
| 
 | |
| #include "rio.h"
 | |
| 
 | |
| /* Sysfs support */
 | |
| #define rio_config_attr(field, format_string)					\
 | |
| static ssize_t								\
 | |
| field##_show(struct device *dev, struct device_attribute *attr, char *buf)			\
 | |
| {									\
 | |
| 	struct rio_dev *rdev = to_rio_dev(dev);				\
 | |
| 									\
 | |
| 	return sprintf(buf, format_string, rdev->field);		\
 | |
| }									\
 | |
| 
 | |
| rio_config_attr(did, "0x%04x\n");
 | |
| rio_config_attr(vid, "0x%04x\n");
 | |
| rio_config_attr(device_rev, "0x%08x\n");
 | |
| rio_config_attr(asm_did, "0x%04x\n");
 | |
| rio_config_attr(asm_vid, "0x%04x\n");
 | |
| rio_config_attr(asm_rev, "0x%04x\n");
 | |
| rio_config_attr(destid, "0x%04x\n");
 | |
| rio_config_attr(hopcount, "0x%02x\n");
 | |
| 
 | |
| static ssize_t routes_show(struct device *dev, struct device_attribute *attr, char *buf)
 | |
| {
 | |
| 	struct rio_dev *rdev = to_rio_dev(dev);
 | |
| 	char *str = buf;
 | |
| 	int i;
 | |
| 
 | |
| 	for (i = 0; i < RIO_MAX_ROUTE_ENTRIES(rdev->net->hport->sys_size);
 | |
| 			i++) {
 | |
| 		if (rdev->rswitch->route_table[i] == RIO_INVALID_ROUTE)
 | |
| 			continue;
 | |
| 		str +=
 | |
| 		    sprintf(str, "%04x %02x\n", i,
 | |
| 			    rdev->rswitch->route_table[i]);
 | |
| 	}
 | |
| 
 | |
| 	return (str - buf);
 | |
| }
 | |
| 
 | |
| static ssize_t lprev_show(struct device *dev,
 | |
| 			  struct device_attribute *attr, char *buf)
 | |
| {
 | |
| 	struct rio_dev *rdev = to_rio_dev(dev);
 | |
| 
 | |
| 	return sprintf(buf, "%s\n",
 | |
| 			(rdev->prev) ? rio_name(rdev->prev) : "root");
 | |
| }
 | |
| 
 | |
| static ssize_t lnext_show(struct device *dev,
 | |
| 			  struct device_attribute *attr, char *buf)
 | |
| {
 | |
| 	struct rio_dev *rdev = to_rio_dev(dev);
 | |
| 	char *str = buf;
 | |
| 	int i;
 | |
| 
 | |
| 	if (rdev->pef & RIO_PEF_SWITCH) {
 | |
| 		for (i = 0; i < RIO_GET_TOTAL_PORTS(rdev->swpinfo); i++) {
 | |
| 			if (rdev->rswitch->nextdev[i])
 | |
| 				str += sprintf(str, "%s\n",
 | |
| 					rio_name(rdev->rswitch->nextdev[i]));
 | |
| 			else
 | |
| 				str += sprintf(str, "null\n");
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	return str - buf;
 | |
| }
 | |
| 
 | |
| struct device_attribute rio_dev_attrs[] = {
 | |
| 	__ATTR_RO(did),
 | |
| 	__ATTR_RO(vid),
 | |
| 	__ATTR_RO(device_rev),
 | |
| 	__ATTR_RO(asm_did),
 | |
| 	__ATTR_RO(asm_vid),
 | |
| 	__ATTR_RO(asm_rev),
 | |
| 	__ATTR_RO(lprev),
 | |
| 	__ATTR_RO(destid),
 | |
| 	__ATTR_NULL,
 | |
| };
 | |
| 
 | |
| static DEVICE_ATTR(routes, S_IRUGO, routes_show, NULL);
 | |
| static DEVICE_ATTR(lnext, S_IRUGO, lnext_show, NULL);
 | |
| static DEVICE_ATTR(hopcount, S_IRUGO, hopcount_show, NULL);
 | |
| 
 | |
| static ssize_t
 | |
| rio_read_config(struct file *filp, struct kobject *kobj,
 | |
| 		struct bin_attribute *bin_attr,
 | |
| 		char *buf, loff_t off, size_t count)
 | |
| {
 | |
| 	struct rio_dev *dev =
 | |
| 	    to_rio_dev(container_of(kobj, struct device, kobj));
 | |
| 	unsigned int size = 0x100;
 | |
| 	loff_t init_off = off;
 | |
| 	u8 *data = (u8 *) buf;
 | |
| 
 | |
| 	/* Several chips lock up trying to read undefined config space */
 | |
| 	if (capable(CAP_SYS_ADMIN))
 | |
| 		size = RIO_MAINT_SPACE_SZ;
 | |
| 
 | |
| 	if (off >= size)
 | |
| 		return 0;
 | |
| 	if (off + count > size) {
 | |
| 		size -= off;
 | |
| 		count = size;
 | |
| 	} else {
 | |
| 		size = count;
 | |
| 	}
 | |
| 
 | |
| 	if ((off & 1) && size) {
 | |
| 		u8 val;
 | |
| 		rio_read_config_8(dev, off, &val);
 | |
| 		data[off - init_off] = val;
 | |
| 		off++;
 | |
| 		size--;
 | |
| 	}
 | |
| 
 | |
| 	if ((off & 3) && size > 2) {
 | |
| 		u16 val;
 | |
| 		rio_read_config_16(dev, off, &val);
 | |
| 		data[off - init_off] = (val >> 8) & 0xff;
 | |
| 		data[off - init_off + 1] = val & 0xff;
 | |
| 		off += 2;
 | |
| 		size -= 2;
 | |
| 	}
 | |
| 
 | |
| 	while (size > 3) {
 | |
| 		u32 val;
 | |
| 		rio_read_config_32(dev, off, &val);
 | |
| 		data[off - init_off] = (val >> 24) & 0xff;
 | |
| 		data[off - init_off + 1] = (val >> 16) & 0xff;
 | |
| 		data[off - init_off + 2] = (val >> 8) & 0xff;
 | |
| 		data[off - init_off + 3] = val & 0xff;
 | |
| 		off += 4;
 | |
| 		size -= 4;
 | |
| 	}
 | |
| 
 | |
| 	if (size >= 2) {
 | |
| 		u16 val;
 | |
| 		rio_read_config_16(dev, off, &val);
 | |
| 		data[off - init_off] = (val >> 8) & 0xff;
 | |
| 		data[off - init_off + 1] = val & 0xff;
 | |
| 		off += 2;
 | |
| 		size -= 2;
 | |
| 	}
 | |
| 
 | |
| 	if (size > 0) {
 | |
| 		u8 val;
 | |
| 		rio_read_config_8(dev, off, &val);
 | |
| 		data[off - init_off] = val;
 | |
| 		off++;
 | |
| 		--size;
 | |
| 	}
 | |
| 
 | |
| 	return count;
 | |
| }
 | |
| 
 | |
| static ssize_t
 | |
| rio_write_config(struct file *filp, struct kobject *kobj,
 | |
| 		 struct bin_attribute *bin_attr,
 | |
| 		 char *buf, loff_t off, size_t count)
 | |
| {
 | |
| 	struct rio_dev *dev =
 | |
| 	    to_rio_dev(container_of(kobj, struct device, kobj));
 | |
| 	unsigned int size = count;
 | |
| 	loff_t init_off = off;
 | |
| 	u8 *data = (u8 *) buf;
 | |
| 
 | |
| 	if (off >= RIO_MAINT_SPACE_SZ)
 | |
| 		return 0;
 | |
| 	if (off + count > RIO_MAINT_SPACE_SZ) {
 | |
| 		size = RIO_MAINT_SPACE_SZ - off;
 | |
| 		count = size;
 | |
| 	}
 | |
| 
 | |
| 	if ((off & 1) && size) {
 | |
| 		rio_write_config_8(dev, off, data[off - init_off]);
 | |
| 		off++;
 | |
| 		size--;
 | |
| 	}
 | |
| 
 | |
| 	if ((off & 3) && (size > 2)) {
 | |
| 		u16 val = data[off - init_off + 1];
 | |
| 		val |= (u16) data[off - init_off] << 8;
 | |
| 		rio_write_config_16(dev, off, val);
 | |
| 		off += 2;
 | |
| 		size -= 2;
 | |
| 	}
 | |
| 
 | |
| 	while (size > 3) {
 | |
| 		u32 val = data[off - init_off + 3];
 | |
| 		val |= (u32) data[off - init_off + 2] << 8;
 | |
| 		val |= (u32) data[off - init_off + 1] << 16;
 | |
| 		val |= (u32) data[off - init_off] << 24;
 | |
| 		rio_write_config_32(dev, off, val);
 | |
| 		off += 4;
 | |
| 		size -= 4;
 | |
| 	}
 | |
| 
 | |
| 	if (size >= 2) {
 | |
| 		u16 val = data[off - init_off + 1];
 | |
| 		val |= (u16) data[off - init_off] << 8;
 | |
| 		rio_write_config_16(dev, off, val);
 | |
| 		off += 2;
 | |
| 		size -= 2;
 | |
| 	}
 | |
| 
 | |
| 	if (size) {
 | |
| 		rio_write_config_8(dev, off, data[off - init_off]);
 | |
| 		off++;
 | |
| 		--size;
 | |
| 	}
 | |
| 
 | |
| 	return count;
 | |
| }
 | |
| 
 | |
| static struct bin_attribute rio_config_attr = {
 | |
| 	.attr = {
 | |
| 		 .name = "config",
 | |
| 		 .mode = S_IRUGO | S_IWUSR,
 | |
| 		 },
 | |
| 	.size = RIO_MAINT_SPACE_SZ,
 | |
| 	.read = rio_read_config,
 | |
| 	.write = rio_write_config,
 | |
| };
 | |
| 
 | |
| /**
 | |
|  * rio_create_sysfs_dev_files - create RIO specific sysfs files
 | |
|  * @rdev: device whose entries should be created
 | |
|  *
 | |
|  * Create files when @rdev is added to sysfs.
 | |
|  */
 | |
| int rio_create_sysfs_dev_files(struct rio_dev *rdev)
 | |
| {
 | |
| 	int err = 0;
 | |
| 
 | |
| 	err = device_create_bin_file(&rdev->dev, &rio_config_attr);
 | |
| 
 | |
| 	if (!err && (rdev->pef & RIO_PEF_SWITCH)) {
 | |
| 		err |= device_create_file(&rdev->dev, &dev_attr_routes);
 | |
| 		err |= device_create_file(&rdev->dev, &dev_attr_lnext);
 | |
| 		err |= device_create_file(&rdev->dev, &dev_attr_hopcount);
 | |
| 		if (!err && rdev->rswitch->sw_sysfs)
 | |
| 			err = rdev->rswitch->sw_sysfs(rdev, RIO_SW_SYSFS_CREATE);
 | |
| 	}
 | |
| 
 | |
| 	if (err)
 | |
| 		pr_warning("RIO: Failed to create attribute file(s) for %s\n",
 | |
| 			   rio_name(rdev));
 | |
| 
 | |
| 	return err;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * rio_remove_sysfs_dev_files - cleanup RIO specific sysfs files
 | |
|  * @rdev: device whose entries we should free
 | |
|  *
 | |
|  * Cleanup when @rdev is removed from sysfs.
 | |
|  */
 | |
| void rio_remove_sysfs_dev_files(struct rio_dev *rdev)
 | |
| {
 | |
| 	device_remove_bin_file(&rdev->dev, &rio_config_attr);
 | |
| 	if (rdev->pef & RIO_PEF_SWITCH) {
 | |
| 		device_remove_file(&rdev->dev, &dev_attr_routes);
 | |
| 		device_remove_file(&rdev->dev, &dev_attr_lnext);
 | |
| 		device_remove_file(&rdev->dev, &dev_attr_hopcount);
 | |
| 		if (rdev->rswitch->sw_sysfs)
 | |
| 			rdev->rswitch->sw_sysfs(rdev, RIO_SW_SYSFS_REMOVE);
 | |
| 	}
 | |
| }
 |