 b51306c634
			
		
	
	
	b51306c634
	
	
	
		
			
			During test of one IB card with guest VM, found that, msi is not
initialized properly.
It turns out __write_msi_msg will do nothing if device current_state is
not PCI_D0.  And, that pci device does not have pm_cap in guest VM.
There is an error in setting of power state to PCI_D0 in
pci_enable_device(), but error is not returned for this.  Following is
code flow:
pci_enable_device() -->   __pci_enable_device_flags() -->
do_pci_enable_device() -->   pci_set_power_state() -->
__pci_start_power_transition()
We have following condition inside __pci_start_power_transition():
         if (platform_pci_power_manageable(dev)) {
                 error = platform_pci_set_power_state(dev, state);
                 if (!error)
                         pci_update_current_state(dev, state);
         } else {
                 error = -ENODEV;
                 /* Fall back to PCI_D0 if native PM is not supported */
                 if (!dev->pm_cap)
                         dev->current_state = PCI_D0;
         }
Here, from platform_pci_set_power_state(), acpi_pci_set_power_state() is
getting called and that is failing with ENODEV because of following
condition:
         if (!handle || ACPI_SUCCESS(acpi_get_handle(handle, "_EJ0",&tmp)))
                 return -ENODEV;
Because of that, pci_update_current_state() is not getting called.
With this patch, if device power state can not be set via
platform_pci_set_power_state and that device does not have native pm
support, then PCI device power state will be set to PCI_D0.
-v2: This also reverts 47e9037ac1, as it's
     not needed after this change.
Acked-by: "Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: Ajaykumar Hotchandani<ajaykumar.hotchandani@oracle.com>
Signed-off-by: Yinghai Lu<yinghai.lu@oracle.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
		
	
			
		
			
				
	
	
		
			1577 lines
		
	
	
	
		
			38 KiB
			
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			1577 lines
		
	
	
	
		
			38 KiB
			
		
	
	
	
		
			C
		
	
	
	
	
	
| /*
 | |
|  * ACPI PCI HotPlug glue functions to ACPI CA subsystem
 | |
|  *
 | |
|  * Copyright (C) 2002,2003 Takayoshi Kochi (t-kochi@bq.jp.nec.com)
 | |
|  * Copyright (C) 2002 Hiroshi Aono (h-aono@ap.jp.nec.com)
 | |
|  * Copyright (C) 2002,2003 NEC Corporation
 | |
|  * Copyright (C) 2003-2005 Matthew Wilcox (matthew.wilcox@hp.com)
 | |
|  * Copyright (C) 2003-2005 Hewlett Packard
 | |
|  * Copyright (C) 2005 Rajesh Shah (rajesh.shah@intel.com)
 | |
|  * Copyright (C) 2005 Intel Corporation
 | |
|  *
 | |
|  * All rights reserved.
 | |
|  *
 | |
|  * This program is free software; you can redistribute it and/or modify
 | |
|  * it under the terms of the GNU General Public License as published by
 | |
|  * the Free Software Foundation; either version 2 of the License, or (at
 | |
|  * your option) any later version.
 | |
|  *
 | |
|  * This program is distributed in the hope that it will be useful, but
 | |
|  * WITHOUT ANY WARRANTY; without even the implied warranty of
 | |
|  * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
 | |
|  * NON INFRINGEMENT.  See the GNU General Public License for more
 | |
|  * details.
 | |
|  *
 | |
|  * You should have received a copy of the GNU General Public License
 | |
|  * along with this program; if not, write to the Free Software
 | |
|  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 | |
|  *
 | |
|  * Send feedback to <kristen.c.accardi@intel.com>
 | |
|  *
 | |
|  */
 | |
| 
 | |
| /*
 | |
|  * Lifetime rules for pci_dev:
 | |
|  *  - The one in acpiphp_bridge has its refcount elevated by pci_get_slot()
 | |
|  *    when the bridge is scanned and it loses a refcount when the bridge
 | |
|  *    is removed.
 | |
|  *  - When a P2P bridge is present, we elevate the refcount on the subordinate
 | |
|  *    bus. It loses the refcount when the the driver unloads.
 | |
|  */
 | |
| 
 | |
| #include <linux/init.h>
 | |
| #include <linux/module.h>
 | |
| 
 | |
| #include <linux/kernel.h>
 | |
| #include <linux/pci.h>
 | |
| #include <linux/pci_hotplug.h>
 | |
| #include <linux/pci-acpi.h>
 | |
| #include <linux/mutex.h>
 | |
| #include <linux/slab.h>
 | |
| #include <linux/acpi.h>
 | |
| 
 | |
| #include "../pci.h"
 | |
| #include "acpiphp.h"
 | |
| 
 | |
| static LIST_HEAD(bridge_list);
 | |
| 
 | |
| #define MY_NAME "acpiphp_glue"
 | |
| 
 | |
| static void handle_hotplug_event_bridge (acpi_handle, u32, void *);
 | |
| static void acpiphp_sanitize_bus(struct pci_bus *bus);
 | |
| static void acpiphp_set_hpp_values(struct pci_bus *bus);
 | |
| static void handle_hotplug_event_func(acpi_handle handle, u32 type, void *context);
 | |
| 
 | |
| /* callback routine to check for the existence of a pci dock device */
 | |
| static acpi_status
 | |
| is_pci_dock_device(acpi_handle handle, u32 lvl, void *context, void **rv)
 | |
| {
 | |
| 	int *count = (int *)context;
 | |
| 
 | |
| 	if (is_dock_device(handle)) {
 | |
| 		(*count)++;
 | |
| 		return AE_CTRL_TERMINATE;
 | |
| 	} else {
 | |
| 		return AE_OK;
 | |
| 	}
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * the _DCK method can do funny things... and sometimes not
 | |
|  * hah-hah funny.
 | |
|  *
 | |
|  * TBD - figure out a way to only call fixups for
 | |
|  * systems that require them.
 | |
|  */
 | |
| static int post_dock_fixups(struct notifier_block *nb, unsigned long val,
 | |
| 	void *v)
 | |
| {
 | |
| 	struct acpiphp_func *func = container_of(nb, struct acpiphp_func, nb);
 | |
| 	struct pci_bus *bus = func->slot->bridge->pci_bus;
 | |
| 	u32 buses;
 | |
| 
 | |
| 	if (!bus->self)
 | |
| 		return  NOTIFY_OK;
 | |
| 
 | |
| 	/* fixup bad _DCK function that rewrites
 | |
| 	 * secondary bridge on slot
 | |
| 	 */
 | |
| 	pci_read_config_dword(bus->self,
 | |
| 			PCI_PRIMARY_BUS,
 | |
| 			&buses);
 | |
| 
 | |
| 	if (((buses >> 8) & 0xff) != bus->secondary) {
 | |
| 		buses = (buses & 0xff000000)
 | |
| 			| ((unsigned int)(bus->primary)     <<  0)
 | |
| 			| ((unsigned int)(bus->secondary)   <<  8)
 | |
| 			| ((unsigned int)(bus->subordinate) << 16);
 | |
| 		pci_write_config_dword(bus->self, PCI_PRIMARY_BUS, buses);
 | |
| 	}
 | |
| 	return NOTIFY_OK;
 | |
| }
 | |
| 
 | |
| 
 | |
| static const struct acpi_dock_ops acpiphp_dock_ops = {
 | |
| 	.handler = handle_hotplug_event_func,
 | |
| };
 | |
| 
 | |
| /* callback routine to register each ACPI PCI slot object */
 | |
| static acpi_status
 | |
| register_slot(acpi_handle handle, u32 lvl, void *context, void **rv)
 | |
| {
 | |
| 	struct acpiphp_bridge *bridge = (struct acpiphp_bridge *)context;
 | |
| 	struct acpiphp_slot *slot;
 | |
| 	struct acpiphp_func *newfunc;
 | |
| 	acpi_handle tmp;
 | |
| 	acpi_status status = AE_OK;
 | |
| 	unsigned long long adr, sun;
 | |
| 	int device, function, retval;
 | |
| 	struct pci_bus *pbus = bridge->pci_bus;
 | |
| 	struct pci_dev *pdev;
 | |
| 
 | |
| 	if (!acpi_pci_check_ejectable(pbus, handle) && !is_dock_device(handle))
 | |
| 		return AE_OK;
 | |
| 
 | |
| 	pdev = pbus->self;
 | |
| 	if (pdev && pci_is_pcie(pdev)) {
 | |
| 		tmp = acpi_find_root_bridge_handle(pdev);
 | |
| 		if (tmp) {
 | |
| 			struct acpi_pci_root *root = acpi_pci_find_root(tmp);
 | |
| 
 | |
| 			if (root && (root->osc_control_set &
 | |
| 					OSC_PCI_EXPRESS_NATIVE_HP_CONTROL))
 | |
| 				return AE_OK;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	acpi_evaluate_integer(handle, "_ADR", NULL, &adr);
 | |
| 	device = (adr >> 16) & 0xffff;
 | |
| 	function = adr & 0xffff;
 | |
| 
 | |
| 	newfunc = kzalloc(sizeof(struct acpiphp_func), GFP_KERNEL);
 | |
| 	if (!newfunc)
 | |
| 		return AE_NO_MEMORY;
 | |
| 
 | |
| 	INIT_LIST_HEAD(&newfunc->sibling);
 | |
| 	newfunc->handle = handle;
 | |
| 	newfunc->function = function;
 | |
| 
 | |
| 	if (ACPI_SUCCESS(acpi_get_handle(handle, "_EJ0", &tmp)))
 | |
| 		newfunc->flags = FUNC_HAS_EJ0;
 | |
| 
 | |
| 	if (ACPI_SUCCESS(acpi_get_handle(handle, "_STA", &tmp)))
 | |
| 		newfunc->flags |= FUNC_HAS_STA;
 | |
| 
 | |
| 	if (ACPI_SUCCESS(acpi_get_handle(handle, "_PS0", &tmp)))
 | |
| 		newfunc->flags |= FUNC_HAS_PS0;
 | |
| 
 | |
| 	if (ACPI_SUCCESS(acpi_get_handle(handle, "_PS3", &tmp)))
 | |
| 		newfunc->flags |= FUNC_HAS_PS3;
 | |
| 
 | |
| 	if (ACPI_SUCCESS(acpi_get_handle(handle, "_DCK", &tmp)))
 | |
| 		newfunc->flags |= FUNC_HAS_DCK;
 | |
| 
 | |
| 	status = acpi_evaluate_integer(handle, "_SUN", NULL, &sun);
 | |
| 	if (ACPI_FAILURE(status)) {
 | |
| 		/*
 | |
| 		 * use the count of the number of slots we've found
 | |
| 		 * for the number of the slot
 | |
| 		 */
 | |
| 		sun = bridge->nr_slots+1;
 | |
| 	}
 | |
| 
 | |
| 	/* search for objects that share the same slot */
 | |
| 	for (slot = bridge->slots; slot; slot = slot->next)
 | |
| 		if (slot->device == device) {
 | |
| 			if (slot->sun != sun)
 | |
| 				warn("sibling found, but _SUN doesn't match!\n");
 | |
| 			break;
 | |
| 		}
 | |
| 
 | |
| 	if (!slot) {
 | |
| 		slot = kzalloc(sizeof(struct acpiphp_slot), GFP_KERNEL);
 | |
| 		if (!slot) {
 | |
| 			kfree(newfunc);
 | |
| 			return AE_NO_MEMORY;
 | |
| 		}
 | |
| 
 | |
| 		slot->bridge = bridge;
 | |
| 		slot->device = device;
 | |
| 		slot->sun = sun;
 | |
| 		INIT_LIST_HEAD(&slot->funcs);
 | |
| 		mutex_init(&slot->crit_sect);
 | |
| 
 | |
| 		slot->next = bridge->slots;
 | |
| 		bridge->slots = slot;
 | |
| 
 | |
| 		bridge->nr_slots++;
 | |
| 
 | |
| 		dbg("found ACPI PCI Hotplug slot %llu at PCI %04x:%02x:%02x\n",
 | |
| 		    slot->sun, pci_domain_nr(pbus), pbus->number, device);
 | |
| 		retval = acpiphp_register_hotplug_slot(slot);
 | |
| 		if (retval) {
 | |
| 			if (retval == -EBUSY)
 | |
| 				warn("Slot %llu already registered by another "
 | |
| 					"hotplug driver\n", slot->sun);
 | |
| 			else
 | |
| 				warn("acpiphp_register_hotplug_slot failed "
 | |
| 					"(err code = 0x%x)\n", retval);
 | |
| 			goto err_exit;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	newfunc->slot = slot;
 | |
| 	list_add_tail(&newfunc->sibling, &slot->funcs);
 | |
| 
 | |
| 	pdev = pci_get_slot(pbus, PCI_DEVFN(device, function));
 | |
| 	if (pdev) {
 | |
| 		slot->flags |= (SLOT_ENABLED | SLOT_POWEREDON);
 | |
| 		pci_dev_put(pdev);
 | |
| 	}
 | |
| 
 | |
| 	if (is_dock_device(handle)) {
 | |
| 		/* we don't want to call this device's _EJ0
 | |
| 		 * because we want the dock notify handler
 | |
| 		 * to call it after it calls _DCK
 | |
| 		 */
 | |
| 		newfunc->flags &= ~FUNC_HAS_EJ0;
 | |
| 		if (register_hotplug_dock_device(handle,
 | |
| 			&acpiphp_dock_ops, newfunc))
 | |
| 			dbg("failed to register dock device\n");
 | |
| 
 | |
| 		/* we need to be notified when dock events happen
 | |
| 		 * outside of the hotplug operation, since we may
 | |
| 		 * need to do fixups before we can hotplug.
 | |
| 		 */
 | |
| 		newfunc->nb.notifier_call = post_dock_fixups;
 | |
| 		if (register_dock_notifier(&newfunc->nb))
 | |
| 			dbg("failed to register a dock notifier");
 | |
| 	}
 | |
| 
 | |
| 	/* install notify handler */
 | |
| 	if (!(newfunc->flags & FUNC_HAS_DCK)) {
 | |
| 		status = acpi_install_notify_handler(handle,
 | |
| 					     ACPI_SYSTEM_NOTIFY,
 | |
| 					     handle_hotplug_event_func,
 | |
| 					     newfunc);
 | |
| 
 | |
| 		if (ACPI_FAILURE(status))
 | |
| 			err("failed to register interrupt notify handler\n");
 | |
| 	} else
 | |
| 		status = AE_OK;
 | |
| 
 | |
| 	return status;
 | |
| 
 | |
|  err_exit:
 | |
| 	bridge->nr_slots--;
 | |
| 	bridge->slots = slot->next;
 | |
| 	kfree(slot);
 | |
| 	kfree(newfunc);
 | |
| 
 | |
| 	return AE_OK;
 | |
| }
 | |
| 
 | |
| 
 | |
| /* see if it's worth looking at this bridge */
 | |
| static int detect_ejectable_slots(acpi_handle handle)
 | |
| {
 | |
| 	int found = acpi_pci_detect_ejectable(handle);
 | |
| 	if (!found) {
 | |
| 		acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, (u32)1,
 | |
| 				    is_pci_dock_device, NULL, (void *)&found, NULL);
 | |
| 	}
 | |
| 	return found;
 | |
| }
 | |
| 
 | |
| /* initialize miscellaneous stuff for both root and PCI-to-PCI bridge */
 | |
| static void init_bridge_misc(struct acpiphp_bridge *bridge)
 | |
| {
 | |
| 	acpi_status status;
 | |
| 
 | |
| 	/* must be added to the list prior to calling register_slot */
 | |
| 	list_add(&bridge->list, &bridge_list);
 | |
| 
 | |
| 	/* register all slot objects under this bridge */
 | |
| 	status = acpi_walk_namespace(ACPI_TYPE_DEVICE, bridge->handle, (u32)1,
 | |
| 				     register_slot, NULL, bridge, NULL);
 | |
| 	if (ACPI_FAILURE(status)) {
 | |
| 		list_del(&bridge->list);
 | |
| 		return;
 | |
| 	}
 | |
| 
 | |
| 	/* install notify handler */
 | |
| 	if (bridge->type != BRIDGE_TYPE_HOST) {
 | |
| 		if ((bridge->flags & BRIDGE_HAS_EJ0) && bridge->func) {
 | |
| 			status = acpi_remove_notify_handler(bridge->func->handle,
 | |
| 						ACPI_SYSTEM_NOTIFY,
 | |
| 						handle_hotplug_event_func);
 | |
| 			if (ACPI_FAILURE(status))
 | |
| 				err("failed to remove notify handler\n");
 | |
| 		}
 | |
| 		status = acpi_install_notify_handler(bridge->handle,
 | |
| 					     ACPI_SYSTEM_NOTIFY,
 | |
| 					     handle_hotplug_event_bridge,
 | |
| 					     bridge);
 | |
| 
 | |
| 		if (ACPI_FAILURE(status)) {
 | |
| 			err("failed to register interrupt notify handler\n");
 | |
| 		}
 | |
| 	}
 | |
| }
 | |
| 
 | |
| 
 | |
| /* find acpiphp_func from acpiphp_bridge */
 | |
| static struct acpiphp_func *acpiphp_bridge_handle_to_function(acpi_handle handle)
 | |
| {
 | |
| 	struct acpiphp_bridge *bridge;
 | |
| 	struct acpiphp_slot *slot;
 | |
| 	struct acpiphp_func *func;
 | |
| 
 | |
| 	list_for_each_entry(bridge, &bridge_list, list) {
 | |
| 		for (slot = bridge->slots; slot; slot = slot->next) {
 | |
| 			list_for_each_entry(func, &slot->funcs, sibling) {
 | |
| 				if (func->handle == handle)
 | |
| 					return func;
 | |
| 			}
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	return NULL;
 | |
| }
 | |
| 
 | |
| 
 | |
| static inline void config_p2p_bridge_flags(struct acpiphp_bridge *bridge)
 | |
| {
 | |
| 	acpi_handle dummy_handle;
 | |
| 
 | |
| 	if (ACPI_SUCCESS(acpi_get_handle(bridge->handle,
 | |
| 					"_STA", &dummy_handle)))
 | |
| 		bridge->flags |= BRIDGE_HAS_STA;
 | |
| 
 | |
| 	if (ACPI_SUCCESS(acpi_get_handle(bridge->handle,
 | |
| 					"_EJ0", &dummy_handle)))
 | |
| 		bridge->flags |= BRIDGE_HAS_EJ0;
 | |
| 
 | |
| 	if (ACPI_SUCCESS(acpi_get_handle(bridge->handle,
 | |
| 					"_PS0", &dummy_handle)))
 | |
| 		bridge->flags |= BRIDGE_HAS_PS0;
 | |
| 
 | |
| 	if (ACPI_SUCCESS(acpi_get_handle(bridge->handle,
 | |
| 					"_PS3", &dummy_handle)))
 | |
| 		bridge->flags |= BRIDGE_HAS_PS3;
 | |
| 
 | |
| 	/* is this ejectable p2p bridge? */
 | |
| 	if (bridge->flags & BRIDGE_HAS_EJ0) {
 | |
| 		struct acpiphp_func *func;
 | |
| 
 | |
| 		dbg("found ejectable p2p bridge\n");
 | |
| 
 | |
| 		/* make link between PCI bridge and PCI function */
 | |
| 		func = acpiphp_bridge_handle_to_function(bridge->handle);
 | |
| 		if (!func)
 | |
| 			return;
 | |
| 		bridge->func = func;
 | |
| 		func->bridge = bridge;
 | |
| 	}
 | |
| }
 | |
| 
 | |
| 
 | |
| /* allocate and initialize host bridge data structure */
 | |
| static void add_host_bridge(acpi_handle *handle)
 | |
| {
 | |
| 	struct acpiphp_bridge *bridge;
 | |
| 	struct acpi_pci_root *root = acpi_pci_find_root(handle);
 | |
| 
 | |
| 	bridge = kzalloc(sizeof(struct acpiphp_bridge), GFP_KERNEL);
 | |
| 	if (bridge == NULL)
 | |
| 		return;
 | |
| 
 | |
| 	bridge->type = BRIDGE_TYPE_HOST;
 | |
| 	bridge->handle = handle;
 | |
| 
 | |
| 	bridge->pci_bus = root->bus;
 | |
| 
 | |
| 	spin_lock_init(&bridge->res_lock);
 | |
| 
 | |
| 	init_bridge_misc(bridge);
 | |
| }
 | |
| 
 | |
| 
 | |
| /* allocate and initialize PCI-to-PCI bridge data structure */
 | |
| static void add_p2p_bridge(acpi_handle *handle)
 | |
| {
 | |
| 	struct acpiphp_bridge *bridge;
 | |
| 
 | |
| 	bridge = kzalloc(sizeof(struct acpiphp_bridge), GFP_KERNEL);
 | |
| 	if (bridge == NULL) {
 | |
| 		err("out of memory\n");
 | |
| 		return;
 | |
| 	}
 | |
| 
 | |
| 	bridge->type = BRIDGE_TYPE_P2P;
 | |
| 	bridge->handle = handle;
 | |
| 	config_p2p_bridge_flags(bridge);
 | |
| 
 | |
| 	bridge->pci_dev = acpi_get_pci_dev(handle);
 | |
| 	bridge->pci_bus = bridge->pci_dev->subordinate;
 | |
| 	if (!bridge->pci_bus) {
 | |
| 		err("This is not a PCI-to-PCI bridge!\n");
 | |
| 		goto err;
 | |
| 	}
 | |
| 
 | |
| 	/*
 | |
| 	 * Grab a ref to the subordinate PCI bus in case the bus is
 | |
| 	 * removed via PCI core logical hotplug. The ref pins the bus
 | |
| 	 * (which we access during module unload).
 | |
| 	 */
 | |
| 	get_device(&bridge->pci_bus->dev);
 | |
| 	spin_lock_init(&bridge->res_lock);
 | |
| 
 | |
| 	init_bridge_misc(bridge);
 | |
| 	return;
 | |
|  err:
 | |
| 	pci_dev_put(bridge->pci_dev);
 | |
| 	kfree(bridge);
 | |
| 	return;
 | |
| }
 | |
| 
 | |
| 
 | |
| /* callback routine to find P2P bridges */
 | |
| static acpi_status
 | |
| find_p2p_bridge(acpi_handle handle, u32 lvl, void *context, void **rv)
 | |
| {
 | |
| 	acpi_status status;
 | |
| 	struct pci_dev *dev;
 | |
| 
 | |
| 	dev = acpi_get_pci_dev(handle);
 | |
| 	if (!dev || !dev->subordinate)
 | |
| 		goto out;
 | |
| 
 | |
| 	/* check if this bridge has ejectable slots */
 | |
| 	if ((detect_ejectable_slots(handle) > 0)) {
 | |
| 		dbg("found PCI-to-PCI bridge at PCI %s\n", pci_name(dev));
 | |
| 		add_p2p_bridge(handle);
 | |
| 	}
 | |
| 
 | |
| 	/* search P2P bridges under this p2p bridge */
 | |
| 	status = acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, (u32)1,
 | |
| 				     find_p2p_bridge, NULL, NULL, NULL);
 | |
| 	if (ACPI_FAILURE(status))
 | |
| 		warn("find_p2p_bridge failed (error code = 0x%x)\n", status);
 | |
| 
 | |
|  out:
 | |
| 	pci_dev_put(dev);
 | |
| 	return AE_OK;
 | |
| }
 | |
| 
 | |
| 
 | |
| /* find hot-pluggable slots, and then find P2P bridge */
 | |
| static int add_bridge(acpi_handle handle)
 | |
| {
 | |
| 	acpi_status status;
 | |
| 	unsigned long long tmp;
 | |
| 	acpi_handle dummy_handle;
 | |
| 
 | |
| 	/* if the bridge doesn't have _STA, we assume it is always there */
 | |
| 	status = acpi_get_handle(handle, "_STA", &dummy_handle);
 | |
| 	if (ACPI_SUCCESS(status)) {
 | |
| 		status = acpi_evaluate_integer(handle, "_STA", NULL, &tmp);
 | |
| 		if (ACPI_FAILURE(status)) {
 | |
| 			dbg("%s: _STA evaluation failure\n", __func__);
 | |
| 			return 0;
 | |
| 		}
 | |
| 		if ((tmp & ACPI_STA_FUNCTIONING) == 0)
 | |
| 			/* don't register this object */
 | |
| 			return 0;
 | |
| 	}
 | |
| 
 | |
| 	/* check if this bridge has ejectable slots */
 | |
| 	if (detect_ejectable_slots(handle) > 0) {
 | |
| 		dbg("found PCI host-bus bridge with hot-pluggable slots\n");
 | |
| 		add_host_bridge(handle);
 | |
| 	}
 | |
| 
 | |
| 	/* search P2P bridges under this host bridge */
 | |
| 	status = acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, (u32)1,
 | |
| 				     find_p2p_bridge, NULL, NULL, NULL);
 | |
| 
 | |
| 	if (ACPI_FAILURE(status))
 | |
| 		warn("find_p2p_bridge failed (error code = 0x%x)\n", status);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static struct acpiphp_bridge *acpiphp_handle_to_bridge(acpi_handle handle)
 | |
| {
 | |
| 	struct acpiphp_bridge *bridge;
 | |
| 
 | |
| 	list_for_each_entry(bridge, &bridge_list, list)
 | |
| 		if (bridge->handle == handle)
 | |
| 			return bridge;
 | |
| 
 | |
| 	return NULL;
 | |
| }
 | |
| 
 | |
| static void cleanup_bridge(struct acpiphp_bridge *bridge)
 | |
| {
 | |
| 	struct acpiphp_slot *slot, *next;
 | |
| 	struct acpiphp_func *func, *tmp;
 | |
| 	acpi_status status;
 | |
| 	acpi_handle handle = bridge->handle;
 | |
| 
 | |
| 	status = acpi_remove_notify_handler(handle, ACPI_SYSTEM_NOTIFY,
 | |
| 					    handle_hotplug_event_bridge);
 | |
| 	if (ACPI_FAILURE(status))
 | |
| 		err("failed to remove notify handler\n");
 | |
| 
 | |
| 	if ((bridge->type != BRIDGE_TYPE_HOST) &&
 | |
| 	    ((bridge->flags & BRIDGE_HAS_EJ0) && bridge->func)) {
 | |
| 		status = acpi_install_notify_handler(bridge->func->handle,
 | |
| 						ACPI_SYSTEM_NOTIFY,
 | |
| 						handle_hotplug_event_func,
 | |
| 						bridge->func);
 | |
| 		if (ACPI_FAILURE(status))
 | |
| 			err("failed to install interrupt notify handler\n");
 | |
| 	}
 | |
| 
 | |
| 	slot = bridge->slots;
 | |
| 	while (slot) {
 | |
| 		next = slot->next;
 | |
| 		list_for_each_entry_safe(func, tmp, &slot->funcs, sibling) {
 | |
| 			if (is_dock_device(func->handle)) {
 | |
| 				unregister_hotplug_dock_device(func->handle);
 | |
| 				unregister_dock_notifier(&func->nb);
 | |
| 			}
 | |
| 			if (!(func->flags & FUNC_HAS_DCK)) {
 | |
| 				status = acpi_remove_notify_handler(func->handle,
 | |
| 						ACPI_SYSTEM_NOTIFY,
 | |
| 						handle_hotplug_event_func);
 | |
| 				if (ACPI_FAILURE(status))
 | |
| 					err("failed to remove notify handler\n");
 | |
| 			}
 | |
| 			list_del(&func->sibling);
 | |
| 			kfree(func);
 | |
| 		}
 | |
| 		acpiphp_unregister_hotplug_slot(slot);
 | |
| 		list_del(&slot->funcs);
 | |
| 		kfree(slot);
 | |
| 		slot = next;
 | |
| 	}
 | |
| 
 | |
| 	/*
 | |
| 	 * Only P2P bridges have a pci_dev
 | |
| 	 */
 | |
| 	if (bridge->pci_dev)
 | |
| 		put_device(&bridge->pci_bus->dev);
 | |
| 
 | |
| 	pci_dev_put(bridge->pci_dev);
 | |
| 	list_del(&bridge->list);
 | |
| 	kfree(bridge);
 | |
| }
 | |
| 
 | |
| static acpi_status
 | |
| cleanup_p2p_bridge(acpi_handle handle, u32 lvl, void *context, void **rv)
 | |
| {
 | |
| 	struct acpiphp_bridge *bridge;
 | |
| 
 | |
| 	/* cleanup p2p bridges under this P2P bridge
 | |
| 	   in a depth-first manner */
 | |
| 	acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, (u32)1,
 | |
| 				cleanup_p2p_bridge, NULL, NULL, NULL);
 | |
| 
 | |
| 	bridge = acpiphp_handle_to_bridge(handle);
 | |
| 	if (bridge)
 | |
| 		cleanup_bridge(bridge);
 | |
| 
 | |
| 	return AE_OK;
 | |
| }
 | |
| 
 | |
| static void remove_bridge(acpi_handle handle)
 | |
| {
 | |
| 	struct acpiphp_bridge *bridge;
 | |
| 
 | |
| 	/* cleanup p2p bridges under this host bridge
 | |
| 	   in a depth-first manner */
 | |
| 	acpi_walk_namespace(ACPI_TYPE_DEVICE, handle,
 | |
| 				(u32)1, cleanup_p2p_bridge, NULL, NULL, NULL);
 | |
| 
 | |
| 	/*
 | |
| 	 * On root bridges with hotplug slots directly underneath (ie,
 | |
| 	 * no p2p bridge between), we call cleanup_bridge(). 
 | |
| 	 *
 | |
| 	 * The else clause cleans up root bridges that either had no
 | |
| 	 * hotplug slots at all, or had a p2p bridge underneath.
 | |
| 	 */
 | |
| 	bridge = acpiphp_handle_to_bridge(handle);
 | |
| 	if (bridge)
 | |
| 		cleanup_bridge(bridge);
 | |
| 	else
 | |
| 		acpi_remove_notify_handler(handle, ACPI_SYSTEM_NOTIFY,
 | |
| 					   handle_hotplug_event_bridge);
 | |
| }
 | |
| 
 | |
| static int power_on_slot(struct acpiphp_slot *slot)
 | |
| {
 | |
| 	acpi_status status;
 | |
| 	struct acpiphp_func *func;
 | |
| 	int retval = 0;
 | |
| 
 | |
| 	/* if already enabled, just skip */
 | |
| 	if (slot->flags & SLOT_POWEREDON)
 | |
| 		goto err_exit;
 | |
| 
 | |
| 	list_for_each_entry(func, &slot->funcs, sibling) {
 | |
| 		if (func->flags & FUNC_HAS_PS0) {
 | |
| 			dbg("%s: executing _PS0\n", __func__);
 | |
| 			status = acpi_evaluate_object(func->handle, "_PS0", NULL, NULL);
 | |
| 			if (ACPI_FAILURE(status)) {
 | |
| 				warn("%s: _PS0 failed\n", __func__);
 | |
| 				retval = -1;
 | |
| 				goto err_exit;
 | |
| 			} else
 | |
| 				break;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	/* TBD: evaluate _STA to check if the slot is enabled */
 | |
| 
 | |
| 	slot->flags |= SLOT_POWEREDON;
 | |
| 
 | |
|  err_exit:
 | |
| 	return retval;
 | |
| }
 | |
| 
 | |
| 
 | |
| static int power_off_slot(struct acpiphp_slot *slot)
 | |
| {
 | |
| 	acpi_status status;
 | |
| 	struct acpiphp_func *func;
 | |
| 
 | |
| 	int retval = 0;
 | |
| 
 | |
| 	/* if already disabled, just skip */
 | |
| 	if ((slot->flags & SLOT_POWEREDON) == 0)
 | |
| 		goto err_exit;
 | |
| 
 | |
| 	list_for_each_entry(func, &slot->funcs, sibling) {
 | |
| 		if (func->flags & FUNC_HAS_PS3) {
 | |
| 			status = acpi_evaluate_object(func->handle, "_PS3", NULL, NULL);
 | |
| 			if (ACPI_FAILURE(status)) {
 | |
| 				warn("%s: _PS3 failed\n", __func__);
 | |
| 				retval = -1;
 | |
| 				goto err_exit;
 | |
| 			} else
 | |
| 				break;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	/* TBD: evaluate _STA to check if the slot is disabled */
 | |
| 
 | |
| 	slot->flags &= (~SLOT_POWEREDON);
 | |
| 
 | |
|  err_exit:
 | |
| 	return retval;
 | |
| }
 | |
| 
 | |
| 
 | |
| 
 | |
| /**
 | |
|  * acpiphp_max_busnr - return the highest reserved bus number under the given bus.
 | |
|  * @bus: bus to start search with
 | |
|  */
 | |
| static unsigned char acpiphp_max_busnr(struct pci_bus *bus)
 | |
| {
 | |
| 	struct list_head *tmp;
 | |
| 	unsigned char max, n;
 | |
| 
 | |
| 	/*
 | |
| 	 * pci_bus_max_busnr will return the highest
 | |
| 	 * reserved busnr for all these children.
 | |
| 	 * that is equivalent to the bus->subordinate
 | |
| 	 * value.  We don't want to use the parent's
 | |
| 	 * bus->subordinate value because it could have
 | |
| 	 * padding in it.
 | |
| 	 */
 | |
| 	max = bus->secondary;
 | |
| 
 | |
| 	list_for_each(tmp, &bus->children) {
 | |
| 		n = pci_bus_max_busnr(pci_bus_b(tmp));
 | |
| 		if (n > max)
 | |
| 			max = n;
 | |
| 	}
 | |
| 	return max;
 | |
| }
 | |
| 
 | |
| 
 | |
| /**
 | |
|  * acpiphp_bus_add - add a new bus to acpi subsystem
 | |
|  * @func: acpiphp_func of the bridge
 | |
|  */
 | |
| static int acpiphp_bus_add(struct acpiphp_func *func)
 | |
| {
 | |
| 	acpi_handle phandle;
 | |
| 	struct acpi_device *device, *pdevice;
 | |
| 	int ret_val;
 | |
| 
 | |
| 	acpi_get_parent(func->handle, &phandle);
 | |
| 	if (acpi_bus_get_device(phandle, &pdevice)) {
 | |
| 		dbg("no parent device, assuming NULL\n");
 | |
| 		pdevice = NULL;
 | |
| 	}
 | |
| 	if (!acpi_bus_get_device(func->handle, &device)) {
 | |
| 		dbg("bus exists... trim\n");
 | |
| 		/* this shouldn't be in here, so remove
 | |
| 		 * the bus then re-add it...
 | |
| 		 */
 | |
| 		ret_val = acpi_bus_trim(device, 1);
 | |
| 		dbg("acpi_bus_trim return %x\n", ret_val);
 | |
| 	}
 | |
| 
 | |
| 	ret_val = acpi_bus_add(&device, pdevice, func->handle,
 | |
| 		ACPI_BUS_TYPE_DEVICE);
 | |
| 	if (ret_val) {
 | |
| 		dbg("error adding bus, %x\n",
 | |
| 			-ret_val);
 | |
| 		goto acpiphp_bus_add_out;
 | |
| 	}
 | |
| 	ret_val = acpi_bus_start(device);
 | |
| 
 | |
| acpiphp_bus_add_out:
 | |
| 	return ret_val;
 | |
| }
 | |
| 
 | |
| 
 | |
| /**
 | |
|  * acpiphp_bus_trim - trim a bus from acpi subsystem
 | |
|  * @handle: handle to acpi namespace
 | |
|  */
 | |
| static int acpiphp_bus_trim(acpi_handle handle)
 | |
| {
 | |
| 	struct acpi_device *device;
 | |
| 	int retval;
 | |
| 
 | |
| 	retval = acpi_bus_get_device(handle, &device);
 | |
| 	if (retval) {
 | |
| 		dbg("acpi_device not found\n");
 | |
| 		return retval;
 | |
| 	}
 | |
| 
 | |
| 	retval = acpi_bus_trim(device, 1);
 | |
| 	if (retval)
 | |
| 		err("cannot remove from acpi list\n");
 | |
| 
 | |
| 	return retval;
 | |
| }
 | |
| 
 | |
| static void acpiphp_set_acpi_region(struct acpiphp_slot *slot)
 | |
| {
 | |
| 	struct acpiphp_func *func;
 | |
| 	union acpi_object params[2];
 | |
| 	struct acpi_object_list arg_list;
 | |
| 
 | |
| 	list_for_each_entry(func, &slot->funcs, sibling) {
 | |
| 		arg_list.count = 2;
 | |
| 		arg_list.pointer = params;
 | |
| 		params[0].type = ACPI_TYPE_INTEGER;
 | |
| 		params[0].integer.value = ACPI_ADR_SPACE_PCI_CONFIG;
 | |
| 		params[1].type = ACPI_TYPE_INTEGER;
 | |
| 		params[1].integer.value = 1;
 | |
| 		/* _REG is optional, we don't care about if there is failure */
 | |
| 		acpi_evaluate_object(func->handle, "_REG", &arg_list, NULL);
 | |
| 	}
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * enable_device - enable, configure a slot
 | |
|  * @slot: slot to be enabled
 | |
|  *
 | |
|  * This function should be called per *physical slot*,
 | |
|  * not per each slot object in ACPI namespace.
 | |
|  */
 | |
| static int __ref enable_device(struct acpiphp_slot *slot)
 | |
| {
 | |
| 	struct pci_dev *dev;
 | |
| 	struct pci_bus *bus = slot->bridge->pci_bus;
 | |
| 	struct acpiphp_func *func;
 | |
| 	int retval = 0;
 | |
| 	int num, max, pass;
 | |
| 	acpi_status status;
 | |
| 
 | |
| 	if (slot->flags & SLOT_ENABLED)
 | |
| 		goto err_exit;
 | |
| 
 | |
| 	/* sanity check: dev should be NULL when hot-plugged in */
 | |
| 	dev = pci_get_slot(bus, PCI_DEVFN(slot->device, 0));
 | |
| 	if (dev) {
 | |
| 		/* This case shouldn't happen */
 | |
| 		err("pci_dev structure already exists.\n");
 | |
| 		pci_dev_put(dev);
 | |
| 		retval = -1;
 | |
| 		goto err_exit;
 | |
| 	}
 | |
| 
 | |
| 	num = pci_scan_slot(bus, PCI_DEVFN(slot->device, 0));
 | |
| 	if (num == 0) {
 | |
| 		err("No new device found\n");
 | |
| 		retval = -1;
 | |
| 		goto err_exit;
 | |
| 	}
 | |
| 
 | |
| 	max = acpiphp_max_busnr(bus);
 | |
| 	for (pass = 0; pass < 2; pass++) {
 | |
| 		list_for_each_entry(dev, &bus->devices, bus_list) {
 | |
| 			if (PCI_SLOT(dev->devfn) != slot->device)
 | |
| 				continue;
 | |
| 			if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE ||
 | |
| 			    dev->hdr_type == PCI_HEADER_TYPE_CARDBUS) {
 | |
| 				max = pci_scan_bridge(bus, dev, max, pass);
 | |
| 				if (pass && dev->subordinate)
 | |
| 					pci_bus_size_bridges(dev->subordinate);
 | |
| 			}
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	list_for_each_entry(func, &slot->funcs, sibling)
 | |
| 		acpiphp_bus_add(func);
 | |
| 
 | |
| 	pci_bus_assign_resources(bus);
 | |
| 	acpiphp_sanitize_bus(bus);
 | |
| 	acpiphp_set_hpp_values(bus);
 | |
| 	acpiphp_set_acpi_region(slot);
 | |
| 	pci_enable_bridges(bus);
 | |
| 
 | |
| 	list_for_each_entry(dev, &bus->devices, bus_list) {
 | |
| 		/* Assume that newly added devices are powered on already. */
 | |
| 		if (!dev->is_added)
 | |
| 			dev->current_state = PCI_D0;
 | |
| 	}
 | |
| 
 | |
| 	pci_bus_add_devices(bus);
 | |
| 
 | |
| 	list_for_each_entry(func, &slot->funcs, sibling) {
 | |
| 		dev = pci_get_slot(bus, PCI_DEVFN(slot->device,
 | |
| 						  func->function));
 | |
| 		if (!dev)
 | |
| 			continue;
 | |
| 
 | |
| 		if (dev->hdr_type != PCI_HEADER_TYPE_BRIDGE &&
 | |
| 		    dev->hdr_type != PCI_HEADER_TYPE_CARDBUS) {
 | |
| 			pci_dev_put(dev);
 | |
| 			continue;
 | |
| 		}
 | |
| 
 | |
| 		status = find_p2p_bridge(func->handle, (u32)1, bus, NULL);
 | |
| 		if (ACPI_FAILURE(status))
 | |
| 			warn("find_p2p_bridge failed (error code = 0x%x)\n",
 | |
| 				status);
 | |
| 		pci_dev_put(dev);
 | |
| 	}
 | |
| 
 | |
| 	slot->flags |= SLOT_ENABLED;
 | |
| 
 | |
|  err_exit:
 | |
| 	return retval;
 | |
| }
 | |
| 
 | |
| static void disable_bridges(struct pci_bus *bus)
 | |
| {
 | |
| 	struct pci_dev *dev;
 | |
| 	list_for_each_entry(dev, &bus->devices, bus_list) {
 | |
| 		if (dev->subordinate) {
 | |
| 			disable_bridges(dev->subordinate);
 | |
| 			pci_disable_device(dev);
 | |
| 		}
 | |
| 	}
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * disable_device - disable a slot
 | |
|  * @slot: ACPI PHP slot
 | |
|  */
 | |
| static int disable_device(struct acpiphp_slot *slot)
 | |
| {
 | |
| 	struct acpiphp_func *func;
 | |
| 	struct pci_dev *pdev;
 | |
| 
 | |
| 	/* is this slot already disabled? */
 | |
| 	if (!(slot->flags & SLOT_ENABLED))
 | |
| 		goto err_exit;
 | |
| 
 | |
| 	list_for_each_entry(func, &slot->funcs, sibling) {
 | |
| 		if (func->bridge) {
 | |
| 			/* cleanup p2p bridges under this P2P bridge */
 | |
| 			cleanup_p2p_bridge(func->bridge->handle,
 | |
| 						(u32)1, NULL, NULL);
 | |
| 			func->bridge = NULL;
 | |
| 		}
 | |
| 
 | |
| 		pdev = pci_get_slot(slot->bridge->pci_bus,
 | |
| 				    PCI_DEVFN(slot->device, func->function));
 | |
| 		if (pdev) {
 | |
| 			pci_stop_bus_device(pdev);
 | |
| 			if (pdev->subordinate) {
 | |
| 				disable_bridges(pdev->subordinate);
 | |
| 				pci_disable_device(pdev);
 | |
| 			}
 | |
| 			pci_remove_bus_device(pdev);
 | |
| 			pci_dev_put(pdev);
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	list_for_each_entry(func, &slot->funcs, sibling) {
 | |
| 		acpiphp_bus_trim(func->handle);
 | |
| 	}
 | |
| 
 | |
| 	slot->flags &= (~SLOT_ENABLED);
 | |
| 
 | |
| err_exit:
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| 
 | |
| /**
 | |
|  * get_slot_status - get ACPI slot status
 | |
|  * @slot: ACPI PHP slot
 | |
|  *
 | |
|  * If a slot has _STA for each function and if any one of them
 | |
|  * returned non-zero status, return it.
 | |
|  *
 | |
|  * If a slot doesn't have _STA and if any one of its functions'
 | |
|  * configuration space is configured, return 0x0f as a _STA.
 | |
|  *
 | |
|  * Otherwise return 0.
 | |
|  */
 | |
| static unsigned int get_slot_status(struct acpiphp_slot *slot)
 | |
| {
 | |
| 	acpi_status status;
 | |
| 	unsigned long long sta = 0;
 | |
| 	u32 dvid;
 | |
| 	struct acpiphp_func *func;
 | |
| 
 | |
| 	list_for_each_entry(func, &slot->funcs, sibling) {
 | |
| 		if (func->flags & FUNC_HAS_STA) {
 | |
| 			status = acpi_evaluate_integer(func->handle, "_STA", NULL, &sta);
 | |
| 			if (ACPI_SUCCESS(status) && sta)
 | |
| 				break;
 | |
| 		} else {
 | |
| 			pci_bus_read_config_dword(slot->bridge->pci_bus,
 | |
| 						  PCI_DEVFN(slot->device,
 | |
| 							    func->function),
 | |
| 						  PCI_VENDOR_ID, &dvid);
 | |
| 			if (dvid != 0xffffffff) {
 | |
| 				sta = ACPI_STA_ALL;
 | |
| 				break;
 | |
| 			}
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	return (unsigned int)sta;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * acpiphp_eject_slot - physically eject the slot
 | |
|  * @slot: ACPI PHP slot
 | |
|  */
 | |
| int acpiphp_eject_slot(struct acpiphp_slot *slot)
 | |
| {
 | |
| 	acpi_status status;
 | |
| 	struct acpiphp_func *func;
 | |
| 	struct acpi_object_list arg_list;
 | |
| 	union acpi_object arg;
 | |
| 
 | |
| 	list_for_each_entry(func, &slot->funcs, sibling) {
 | |
| 		/* We don't want to call _EJ0 on non-existing functions. */
 | |
| 		if ((func->flags & FUNC_HAS_EJ0)) {
 | |
| 			/* _EJ0 method take one argument */
 | |
| 			arg_list.count = 1;
 | |
| 			arg_list.pointer = &arg;
 | |
| 			arg.type = ACPI_TYPE_INTEGER;
 | |
| 			arg.integer.value = 1;
 | |
| 
 | |
| 			status = acpi_evaluate_object(func->handle, "_EJ0", &arg_list, NULL);
 | |
| 			if (ACPI_FAILURE(status)) {
 | |
| 				warn("%s: _EJ0 failed\n", __func__);
 | |
| 				return -1;
 | |
| 			} else
 | |
| 				break;
 | |
| 		}
 | |
| 	}
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * acpiphp_check_bridge - re-enumerate devices
 | |
|  * @bridge: where to begin re-enumeration
 | |
|  *
 | |
|  * Iterate over all slots under this bridge and make sure that if a
 | |
|  * card is present they are enabled, and if not they are disabled.
 | |
|  */
 | |
| static int acpiphp_check_bridge(struct acpiphp_bridge *bridge)
 | |
| {
 | |
| 	struct acpiphp_slot *slot;
 | |
| 	int retval = 0;
 | |
| 	int enabled, disabled;
 | |
| 
 | |
| 	enabled = disabled = 0;
 | |
| 
 | |
| 	for (slot = bridge->slots; slot; slot = slot->next) {
 | |
| 		unsigned int status = get_slot_status(slot);
 | |
| 		if (slot->flags & SLOT_ENABLED) {
 | |
| 			if (status == ACPI_STA_ALL)
 | |
| 				continue;
 | |
| 			retval = acpiphp_disable_slot(slot);
 | |
| 			if (retval) {
 | |
| 				err("Error occurred in disabling\n");
 | |
| 				goto err_exit;
 | |
| 			} else {
 | |
| 				acpiphp_eject_slot(slot);
 | |
| 			}
 | |
| 			disabled++;
 | |
| 		} else {
 | |
| 			if (status != ACPI_STA_ALL)
 | |
| 				continue;
 | |
| 			retval = acpiphp_enable_slot(slot);
 | |
| 			if (retval) {
 | |
| 				err("Error occurred in enabling\n");
 | |
| 				goto err_exit;
 | |
| 			}
 | |
| 			enabled++;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	dbg("%s: %d enabled, %d disabled\n", __func__, enabled, disabled);
 | |
| 
 | |
|  err_exit:
 | |
| 	return retval;
 | |
| }
 | |
| 
 | |
| static void acpiphp_set_hpp_values(struct pci_bus *bus)
 | |
| {
 | |
| 	struct pci_dev *dev;
 | |
| 
 | |
| 	list_for_each_entry(dev, &bus->devices, bus_list)
 | |
| 		pci_configure_slot(dev);
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * Remove devices for which we could not assign resources, call
 | |
|  * arch specific code to fix-up the bus
 | |
|  */
 | |
| static void acpiphp_sanitize_bus(struct pci_bus *bus)
 | |
| {
 | |
| 	struct pci_dev *dev;
 | |
| 	int i;
 | |
| 	unsigned long type_mask = IORESOURCE_IO | IORESOURCE_MEM;
 | |
| 
 | |
| 	list_for_each_entry(dev, &bus->devices, bus_list) {
 | |
| 		for (i=0; i<PCI_BRIDGE_RESOURCES; i++) {
 | |
| 			struct resource *res = &dev->resource[i];
 | |
| 			if ((res->flags & type_mask) && !res->start &&
 | |
| 					res->end) {
 | |
| 				/* Could not assign a required resources
 | |
| 				 * for this device, remove it */
 | |
| 				pci_remove_bus_device(dev);
 | |
| 				break;
 | |
| 			}
 | |
| 		}
 | |
| 	}
 | |
| }
 | |
| 
 | |
| /* Program resources in newly inserted bridge */
 | |
| static int acpiphp_configure_bridge (acpi_handle handle)
 | |
| {
 | |
| 	struct pci_bus *bus;
 | |
| 
 | |
| 	if (acpi_is_root_bridge(handle)) {
 | |
| 		struct acpi_pci_root *root = acpi_pci_find_root(handle);
 | |
| 		bus = root->bus;
 | |
| 	} else {
 | |
| 		struct pci_dev *pdev = acpi_get_pci_dev(handle);
 | |
| 		bus = pdev->subordinate;
 | |
| 		pci_dev_put(pdev);
 | |
| 	}
 | |
| 
 | |
| 	pci_bus_size_bridges(bus);
 | |
| 	pci_bus_assign_resources(bus);
 | |
| 	acpiphp_sanitize_bus(bus);
 | |
| 	acpiphp_set_hpp_values(bus);
 | |
| 	pci_enable_bridges(bus);
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static void handle_bridge_insertion(acpi_handle handle, u32 type)
 | |
| {
 | |
| 	struct acpi_device *device, *pdevice;
 | |
| 	acpi_handle phandle;
 | |
| 
 | |
| 	if ((type != ACPI_NOTIFY_BUS_CHECK) &&
 | |
| 			(type != ACPI_NOTIFY_DEVICE_CHECK)) {
 | |
| 		err("unexpected notification type %d\n", type);
 | |
| 		return;
 | |
| 	}
 | |
| 
 | |
| 	acpi_get_parent(handle, &phandle);
 | |
| 	if (acpi_bus_get_device(phandle, &pdevice)) {
 | |
| 		dbg("no parent device, assuming NULL\n");
 | |
| 		pdevice = NULL;
 | |
| 	}
 | |
| 	if (acpi_bus_add(&device, pdevice, handle, ACPI_BUS_TYPE_DEVICE)) {
 | |
| 		err("cannot add bridge to acpi list\n");
 | |
| 		return;
 | |
| 	}
 | |
| 	if (!acpiphp_configure_bridge(handle) &&
 | |
| 		!acpi_bus_start(device))
 | |
| 		add_bridge(handle);
 | |
| 	else
 | |
| 		err("cannot configure and start bridge\n");
 | |
| 
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * ACPI event handlers
 | |
|  */
 | |
| 
 | |
| static acpi_status
 | |
| count_sub_bridges(acpi_handle handle, u32 lvl, void *context, void **rv)
 | |
| {
 | |
| 	int *count = (int *)context;
 | |
| 	struct acpiphp_bridge *bridge;
 | |
| 
 | |
| 	bridge = acpiphp_handle_to_bridge(handle);
 | |
| 	if (bridge)
 | |
| 		(*count)++;
 | |
| 	return AE_OK ;
 | |
| }
 | |
| 
 | |
| static acpi_status
 | |
| check_sub_bridges(acpi_handle handle, u32 lvl, void *context, void **rv)
 | |
| {
 | |
| 	struct acpiphp_bridge *bridge;
 | |
| 	char objname[64];
 | |
| 	struct acpi_buffer buffer = { .length = sizeof(objname),
 | |
| 				      .pointer = objname };
 | |
| 
 | |
| 	bridge = acpiphp_handle_to_bridge(handle);
 | |
| 	if (bridge) {
 | |
| 		acpi_get_name(handle, ACPI_FULL_PATHNAME, &buffer);
 | |
| 		dbg("%s: re-enumerating slots under %s\n",
 | |
| 			__func__, objname);
 | |
| 		acpiphp_check_bridge(bridge);
 | |
| 	}
 | |
| 	return AE_OK ;
 | |
| }
 | |
| 
 | |
| struct acpiphp_hp_work {
 | |
| 	struct work_struct work;
 | |
| 	acpi_handle handle;
 | |
| 	u32 type;
 | |
| 	void *context;
 | |
| };
 | |
| 
 | |
| static void alloc_acpiphp_hp_work(acpi_handle handle, u32 type,
 | |
| 				  void *context,
 | |
| 				  void (*func)(struct work_struct *work))
 | |
| {
 | |
| 	struct acpiphp_hp_work *hp_work;
 | |
| 	int ret;
 | |
| 
 | |
| 	hp_work = kmalloc(sizeof(*hp_work), GFP_KERNEL);
 | |
| 	if (!hp_work)
 | |
| 		return;
 | |
| 
 | |
| 	hp_work->handle = handle;
 | |
| 	hp_work->type = type;
 | |
| 	hp_work->context = context;
 | |
| 
 | |
| 	INIT_WORK(&hp_work->work, func);
 | |
| 	ret = queue_work(kacpi_hotplug_wq, &hp_work->work);
 | |
| 	if (!ret)
 | |
| 		kfree(hp_work);
 | |
| }
 | |
| 
 | |
| static void _handle_hotplug_event_bridge(struct work_struct *work)
 | |
| {
 | |
| 	struct acpiphp_bridge *bridge;
 | |
| 	char objname[64];
 | |
| 	struct acpi_buffer buffer = { .length = sizeof(objname),
 | |
| 				      .pointer = objname };
 | |
| 	struct acpi_device *device;
 | |
| 	int num_sub_bridges = 0;
 | |
| 	struct acpiphp_hp_work *hp_work;
 | |
| 	acpi_handle handle;
 | |
| 	u32 type;
 | |
| 
 | |
| 	hp_work = container_of(work, struct acpiphp_hp_work, work);
 | |
| 	handle = hp_work->handle;
 | |
| 	type = hp_work->type;
 | |
| 
 | |
| 	if (acpi_bus_get_device(handle, &device)) {
 | |
| 		/* This bridge must have just been physically inserted */
 | |
| 		handle_bridge_insertion(handle, type);
 | |
| 		goto out;
 | |
| 	}
 | |
| 
 | |
| 	bridge = acpiphp_handle_to_bridge(handle);
 | |
| 	if (type == ACPI_NOTIFY_BUS_CHECK) {
 | |
| 		acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, ACPI_UINT32_MAX,
 | |
| 			count_sub_bridges, NULL, &num_sub_bridges, NULL);
 | |
| 	}
 | |
| 
 | |
| 	if (!bridge && !num_sub_bridges) {
 | |
| 		err("cannot get bridge info\n");
 | |
| 		goto out;
 | |
| 	}
 | |
| 
 | |
| 	acpi_get_name(handle, ACPI_FULL_PATHNAME, &buffer);
 | |
| 
 | |
| 	switch (type) {
 | |
| 	case ACPI_NOTIFY_BUS_CHECK:
 | |
| 		/* bus re-enumerate */
 | |
| 		dbg("%s: Bus check notify on %s\n", __func__, objname);
 | |
| 		if (bridge) {
 | |
| 			dbg("%s: re-enumerating slots under %s\n",
 | |
| 				__func__, objname);
 | |
| 			acpiphp_check_bridge(bridge);
 | |
| 		}
 | |
| 		if (num_sub_bridges)
 | |
| 			acpi_walk_namespace(ACPI_TYPE_DEVICE, handle,
 | |
| 				ACPI_UINT32_MAX, check_sub_bridges, NULL, NULL, NULL);
 | |
| 		break;
 | |
| 
 | |
| 	case ACPI_NOTIFY_DEVICE_CHECK:
 | |
| 		/* device check */
 | |
| 		dbg("%s: Device check notify on %s\n", __func__, objname);
 | |
| 		acpiphp_check_bridge(bridge);
 | |
| 		break;
 | |
| 
 | |
| 	case ACPI_NOTIFY_DEVICE_WAKE:
 | |
| 		/* wake event */
 | |
| 		dbg("%s: Device wake notify on %s\n", __func__, objname);
 | |
| 		break;
 | |
| 
 | |
| 	case ACPI_NOTIFY_EJECT_REQUEST:
 | |
| 		/* request device eject */
 | |
| 		dbg("%s: Device eject notify on %s\n", __func__, objname);
 | |
| 		if ((bridge->type != BRIDGE_TYPE_HOST) &&
 | |
| 		    (bridge->flags & BRIDGE_HAS_EJ0)) {
 | |
| 			struct acpiphp_slot *slot;
 | |
| 			slot = bridge->func->slot;
 | |
| 			if (!acpiphp_disable_slot(slot))
 | |
| 				acpiphp_eject_slot(slot);
 | |
| 		}
 | |
| 		break;
 | |
| 
 | |
| 	case ACPI_NOTIFY_FREQUENCY_MISMATCH:
 | |
| 		printk(KERN_ERR "Device %s cannot be configured due"
 | |
| 				" to a frequency mismatch\n", objname);
 | |
| 		break;
 | |
| 
 | |
| 	case ACPI_NOTIFY_BUS_MODE_MISMATCH:
 | |
| 		printk(KERN_ERR "Device %s cannot be configured due"
 | |
| 				" to a bus mode mismatch\n", objname);
 | |
| 		break;
 | |
| 
 | |
| 	case ACPI_NOTIFY_POWER_FAULT:
 | |
| 		printk(KERN_ERR "Device %s has suffered a power fault\n",
 | |
| 				objname);
 | |
| 		break;
 | |
| 
 | |
| 	default:
 | |
| 		warn("notify_handler: unknown event type 0x%x for %s\n", type, objname);
 | |
| 		break;
 | |
| 	}
 | |
| 
 | |
| out:
 | |
| 	kfree(hp_work); /* allocated in handle_hotplug_event_bridge */
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * handle_hotplug_event_bridge - handle ACPI event on bridges
 | |
|  * @handle: Notify()'ed acpi_handle
 | |
|  * @type: Notify code
 | |
|  * @context: pointer to acpiphp_bridge structure
 | |
|  *
 | |
|  * Handles ACPI event notification on {host,p2p} bridges.
 | |
|  */
 | |
| static void handle_hotplug_event_bridge(acpi_handle handle, u32 type,
 | |
| 					void *context)
 | |
| {
 | |
| 	/*
 | |
| 	 * Currently the code adds all hotplug events to the kacpid_wq
 | |
| 	 * queue when it should add hotplug events to the kacpi_hotplug_wq.
 | |
| 	 * The proper way to fix this is to reorganize the code so that
 | |
| 	 * drivers (dock, etc.) do not call acpi_os_execute(), etc.
 | |
| 	 * For now just re-add this work to the kacpi_hotplug_wq so we
 | |
| 	 * don't deadlock on hotplug actions.
 | |
| 	 */
 | |
| 	alloc_acpiphp_hp_work(handle, type, context,
 | |
| 			      _handle_hotplug_event_bridge);
 | |
| }
 | |
| 
 | |
| static void _handle_hotplug_event_func(struct work_struct *work)
 | |
| {
 | |
| 	struct acpiphp_func *func;
 | |
| 	char objname[64];
 | |
| 	struct acpi_buffer buffer = { .length = sizeof(objname),
 | |
| 				      .pointer = objname };
 | |
| 	struct acpiphp_hp_work *hp_work;
 | |
| 	acpi_handle handle;
 | |
| 	u32 type;
 | |
| 	void *context;
 | |
| 
 | |
| 	hp_work = container_of(work, struct acpiphp_hp_work, work);
 | |
| 	handle = hp_work->handle;
 | |
| 	type = hp_work->type;
 | |
| 	context = hp_work->context;
 | |
| 
 | |
| 	acpi_get_name(handle, ACPI_FULL_PATHNAME, &buffer);
 | |
| 
 | |
| 	func = (struct acpiphp_func *)context;
 | |
| 
 | |
| 	switch (type) {
 | |
| 	case ACPI_NOTIFY_BUS_CHECK:
 | |
| 		/* bus re-enumerate */
 | |
| 		dbg("%s: Bus check notify on %s\n", __func__, objname);
 | |
| 		acpiphp_enable_slot(func->slot);
 | |
| 		break;
 | |
| 
 | |
| 	case ACPI_NOTIFY_DEVICE_CHECK:
 | |
| 		/* device check : re-enumerate from parent bus */
 | |
| 		dbg("%s: Device check notify on %s\n", __func__, objname);
 | |
| 		acpiphp_check_bridge(func->slot->bridge);
 | |
| 		break;
 | |
| 
 | |
| 	case ACPI_NOTIFY_DEVICE_WAKE:
 | |
| 		/* wake event */
 | |
| 		dbg("%s: Device wake notify on %s\n", __func__, objname);
 | |
| 		break;
 | |
| 
 | |
| 	case ACPI_NOTIFY_EJECT_REQUEST:
 | |
| 		/* request device eject */
 | |
| 		dbg("%s: Device eject notify on %s\n", __func__, objname);
 | |
| 		if (!(acpiphp_disable_slot(func->slot)))
 | |
| 			acpiphp_eject_slot(func->slot);
 | |
| 		break;
 | |
| 
 | |
| 	default:
 | |
| 		warn("notify_handler: unknown event type 0x%x for %s\n", type, objname);
 | |
| 		break;
 | |
| 	}
 | |
| 
 | |
| 	kfree(hp_work); /* allocated in handle_hotplug_event_func */
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * handle_hotplug_event_func - handle ACPI event on functions (i.e. slots)
 | |
|  * @handle: Notify()'ed acpi_handle
 | |
|  * @type: Notify code
 | |
|  * @context: pointer to acpiphp_func structure
 | |
|  *
 | |
|  * Handles ACPI event notification on slots.
 | |
|  */
 | |
| static void handle_hotplug_event_func(acpi_handle handle, u32 type,
 | |
| 				      void *context)
 | |
| {
 | |
| 	/*
 | |
| 	 * Currently the code adds all hotplug events to the kacpid_wq
 | |
| 	 * queue when it should add hotplug events to the kacpi_hotplug_wq.
 | |
| 	 * The proper way to fix this is to reorganize the code so that
 | |
| 	 * drivers (dock, etc.) do not call acpi_os_execute(), etc.
 | |
| 	 * For now just re-add this work to the kacpi_hotplug_wq so we
 | |
| 	 * don't deadlock on hotplug actions.
 | |
| 	 */
 | |
| 	alloc_acpiphp_hp_work(handle, type, context,
 | |
| 			      _handle_hotplug_event_func);
 | |
| }
 | |
| 
 | |
| static acpi_status
 | |
| find_root_bridges(acpi_handle handle, u32 lvl, void *context, void **rv)
 | |
| {
 | |
| 	int *count = (int *)context;
 | |
| 
 | |
| 	if (!acpi_is_root_bridge(handle))
 | |
| 		return AE_OK;
 | |
| 
 | |
| 	(*count)++;
 | |
| 	acpi_install_notify_handler(handle, ACPI_SYSTEM_NOTIFY,
 | |
| 				    handle_hotplug_event_bridge, NULL);
 | |
| 
 | |
| 	return AE_OK ;
 | |
| }
 | |
| 
 | |
| static struct acpi_pci_driver acpi_pci_hp_driver = {
 | |
| 	.add =		add_bridge,
 | |
| 	.remove =	remove_bridge,
 | |
| };
 | |
| 
 | |
| /**
 | |
|  * acpiphp_glue_init - initializes all PCI hotplug - ACPI glue data structures
 | |
|  */
 | |
| int __init acpiphp_glue_init(void)
 | |
| {
 | |
| 	int num = 0;
 | |
| 
 | |
| 	acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT,
 | |
| 			ACPI_UINT32_MAX, find_root_bridges, NULL, &num, NULL);
 | |
| 
 | |
| 	if (num <= 0)
 | |
| 		return -1;
 | |
| 	else
 | |
| 		acpi_pci_register_driver(&acpi_pci_hp_driver);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| 
 | |
| /**
 | |
|  * acpiphp_glue_exit - terminates all PCI hotplug - ACPI glue data structures
 | |
|  *
 | |
|  * This function frees all data allocated in acpiphp_glue_init().
 | |
|  */
 | |
| void  acpiphp_glue_exit(void)
 | |
| {
 | |
| 	acpi_pci_unregister_driver(&acpi_pci_hp_driver);
 | |
| }
 | |
| 
 | |
| 
 | |
| /**
 | |
|  * acpiphp_get_num_slots - count number of slots in a system
 | |
|  */
 | |
| int __init acpiphp_get_num_slots(void)
 | |
| {
 | |
| 	struct acpiphp_bridge *bridge;
 | |
| 	int num_slots = 0;
 | |
| 
 | |
| 	list_for_each_entry(bridge, &bridge_list, list) {
 | |
| 		dbg("Bus %04x:%02x has %d slot%s\n",
 | |
| 				pci_domain_nr(bridge->pci_bus),
 | |
| 				bridge->pci_bus->number, bridge->nr_slots,
 | |
| 				bridge->nr_slots == 1 ? "" : "s");
 | |
| 		num_slots += bridge->nr_slots;
 | |
| 	}
 | |
| 
 | |
| 	dbg("Total %d slots\n", num_slots);
 | |
| 	return num_slots;
 | |
| }
 | |
| 
 | |
| 
 | |
| #if 0
 | |
| /**
 | |
|  * acpiphp_for_each_slot - call function for each slot
 | |
|  * @fn: callback function
 | |
|  * @data: context to be passed to callback function
 | |
|  */
 | |
| static int acpiphp_for_each_slot(acpiphp_callback fn, void *data)
 | |
| {
 | |
| 	struct list_head *node;
 | |
| 	struct acpiphp_bridge *bridge;
 | |
| 	struct acpiphp_slot *slot;
 | |
| 	int retval = 0;
 | |
| 
 | |
| 	list_for_each (node, &bridge_list) {
 | |
| 		bridge = (struct acpiphp_bridge *)node;
 | |
| 		for (slot = bridge->slots; slot; slot = slot->next) {
 | |
| 			retval = fn(slot, data);
 | |
| 			if (!retval)
 | |
| 				goto err_exit;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
|  err_exit:
 | |
| 	return retval;
 | |
| }
 | |
| #endif
 | |
| 
 | |
| 
 | |
| /**
 | |
|  * acpiphp_enable_slot - power on slot
 | |
|  * @slot: ACPI PHP slot
 | |
|  */
 | |
| int acpiphp_enable_slot(struct acpiphp_slot *slot)
 | |
| {
 | |
| 	int retval;
 | |
| 
 | |
| 	mutex_lock(&slot->crit_sect);
 | |
| 
 | |
| 	/* wake up all functions */
 | |
| 	retval = power_on_slot(slot);
 | |
| 	if (retval)
 | |
| 		goto err_exit;
 | |
| 
 | |
| 	if (get_slot_status(slot) == ACPI_STA_ALL) {
 | |
| 		/* configure all functions */
 | |
| 		retval = enable_device(slot);
 | |
| 		if (retval)
 | |
| 			power_off_slot(slot);
 | |
| 	} else {
 | |
| 		dbg("%s: Slot status is not ACPI_STA_ALL\n", __func__);
 | |
| 		power_off_slot(slot);
 | |
| 	}
 | |
| 
 | |
|  err_exit:
 | |
| 	mutex_unlock(&slot->crit_sect);
 | |
| 	return retval;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * acpiphp_disable_slot - power off slot
 | |
|  * @slot: ACPI PHP slot
 | |
|  */
 | |
| int acpiphp_disable_slot(struct acpiphp_slot *slot)
 | |
| {
 | |
| 	int retval = 0;
 | |
| 
 | |
| 	mutex_lock(&slot->crit_sect);
 | |
| 
 | |
| 	/* unconfigure all functions */
 | |
| 	retval = disable_device(slot);
 | |
| 	if (retval)
 | |
| 		goto err_exit;
 | |
| 
 | |
| 	/* power off all functions */
 | |
| 	retval = power_off_slot(slot);
 | |
| 	if (retval)
 | |
| 		goto err_exit;
 | |
| 
 | |
|  err_exit:
 | |
| 	mutex_unlock(&slot->crit_sect);
 | |
| 	return retval;
 | |
| }
 | |
| 
 | |
| 
 | |
| /*
 | |
|  * slot enabled:  1
 | |
|  * slot disabled: 0
 | |
|  */
 | |
| u8 acpiphp_get_power_status(struct acpiphp_slot *slot)
 | |
| {
 | |
| 	return (slot->flags & SLOT_POWEREDON);
 | |
| }
 | |
| 
 | |
| 
 | |
| /*
 | |
|  * latch   open:  1
 | |
|  * latch closed:  0
 | |
|  */
 | |
| u8 acpiphp_get_latch_status(struct acpiphp_slot *slot)
 | |
| {
 | |
| 	unsigned int sta;
 | |
| 
 | |
| 	sta = get_slot_status(slot);
 | |
| 
 | |
| 	return (sta & ACPI_STA_SHOW_IN_UI) ? 0 : 1;
 | |
| }
 | |
| 
 | |
| 
 | |
| /*
 | |
|  * adapter presence : 1
 | |
|  *          absence : 0
 | |
|  */
 | |
| u8 acpiphp_get_adapter_status(struct acpiphp_slot *slot)
 | |
| {
 | |
| 	unsigned int sta;
 | |
| 
 | |
| 	sta = get_slot_status(slot);
 | |
| 
 | |
| 	return (sta == 0) ? 0 : 1;
 | |
| }
 |