fafc9d3fa3
This patchis to add the first mmc controller support for pxa3xx. It's valid for pxa3[0|1|2]0. On zylonite, the first controller supports two slots, this patch only support the first one right now. Signed-off-by: Bridge Wu <bridge.wu@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
90 lines
2.3 KiB
C
90 lines
2.3 KiB
C
#define MMC_STRPCL 0x0000
|
|
#define STOP_CLOCK (1 << 0)
|
|
#define START_CLOCK (2 << 0)
|
|
|
|
#define MMC_STAT 0x0004
|
|
#define STAT_END_CMD_RES (1 << 13)
|
|
#define STAT_PRG_DONE (1 << 12)
|
|
#define STAT_DATA_TRAN_DONE (1 << 11)
|
|
#define STAT_CLK_EN (1 << 8)
|
|
#define STAT_RECV_FIFO_FULL (1 << 7)
|
|
#define STAT_XMIT_FIFO_EMPTY (1 << 6)
|
|
#define STAT_RES_CRC_ERR (1 << 5)
|
|
#define STAT_SPI_READ_ERROR_TOKEN (1 << 4)
|
|
#define STAT_CRC_READ_ERROR (1 << 3)
|
|
#define STAT_CRC_WRITE_ERROR (1 << 2)
|
|
#define STAT_TIME_OUT_RESPONSE (1 << 1)
|
|
#define STAT_READ_TIME_OUT (1 << 0)
|
|
|
|
#define MMC_CLKRT 0x0008 /* 3 bit */
|
|
|
|
#define MMC_SPI 0x000c
|
|
#define SPI_CS_ADDRESS (1 << 3)
|
|
#define SPI_CS_EN (1 << 2)
|
|
#define CRC_ON (1 << 1)
|
|
#define SPI_EN (1 << 0)
|
|
|
|
#define MMC_CMDAT 0x0010
|
|
#define CMDAT_SDIO_INT_EN (1 << 11)
|
|
#define CMDAT_SD_4DAT (1 << 8)
|
|
#define CMDAT_DMAEN (1 << 7)
|
|
#define CMDAT_INIT (1 << 6)
|
|
#define CMDAT_BUSY (1 << 5)
|
|
#define CMDAT_STREAM (1 << 4) /* 1 = stream */
|
|
#define CMDAT_WRITE (1 << 3) /* 1 = write */
|
|
#define CMDAT_DATAEN (1 << 2)
|
|
#define CMDAT_RESP_NONE (0 << 0)
|
|
#define CMDAT_RESP_SHORT (1 << 0)
|
|
#define CMDAT_RESP_R2 (2 << 0)
|
|
#define CMDAT_RESP_R3 (3 << 0)
|
|
|
|
#define MMC_RESTO 0x0014 /* 7 bit */
|
|
|
|
#define MMC_RDTO 0x0018 /* 16 bit */
|
|
|
|
#define MMC_BLKLEN 0x001c /* 10 bit */
|
|
|
|
#define MMC_NOB 0x0020 /* 16 bit */
|
|
|
|
#define MMC_PRTBUF 0x0024
|
|
#define BUF_PART_FULL (1 << 0)
|
|
|
|
#define MMC_I_MASK 0x0028
|
|
|
|
/*PXA27x MMC interrupts*/
|
|
#define SDIO_SUSPEND_ACK (1 << 12)
|
|
#define SDIO_INT (1 << 11)
|
|
#define RD_STALLED (1 << 10)
|
|
#define RES_ERR (1 << 9)
|
|
#define DAT_ERR (1 << 8)
|
|
#define TINT (1 << 7)
|
|
|
|
/*PXA2xx MMC interrupts*/
|
|
#define TXFIFO_WR_REQ (1 << 6)
|
|
#define RXFIFO_RD_REQ (1 << 5)
|
|
#define CLK_IS_OFF (1 << 4)
|
|
#define STOP_CMD (1 << 3)
|
|
#define END_CMD_RES (1 << 2)
|
|
#define PRG_DONE (1 << 1)
|
|
#define DATA_TRAN_DONE (1 << 0)
|
|
|
|
#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
|
|
#define MMC_I_MASK_ALL 0x00001fff
|
|
#else
|
|
#define MMC_I_MASK_ALL 0x0000007f
|
|
#endif
|
|
|
|
#define MMC_I_REG 0x002c
|
|
/* same as MMC_I_MASK */
|
|
|
|
#define MMC_CMD 0x0030
|
|
|
|
#define MMC_ARGH 0x0034 /* 16 bit */
|
|
|
|
#define MMC_ARGL 0x0038 /* 16 bit */
|
|
|
|
#define MMC_RES 0x003c /* 16 bit */
|
|
|
|
#define MMC_RXFIFO 0x0040 /* 8 bit */
|
|
|
|
#define MMC_TXFIFO 0x0044 /* 8 bit */
|